DOCSLIB.ORG

Indian Rubber Manufacturers Research Association Affiliated to DPIIT, Ministry of Commerce & Industry, Government in India

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Indian Rubber Manufacturers Research Association Affiliated to DPIIT, Ministry of Commerce & Industry, Government in India ISO 9001 Certified Institute Certificate Course on Rubber Materials Science & Technology 2020-21 Entry IRMRA Vision 2030 To be a premier R&D, Testing and Training organization, providing services to the Rubber Industry for Innovation and Research. Indian Rubber Manufacturers Research Association Affiliated to DPIIT, Ministry of Commerce & Industry, Government in India Plot no.254/1B, Road No.16-V, Wagle Industrial Estate, Thane – 400 604, Maharashtra, Telephone: 022-6787-3200/201 (19 Lines) IRMRA offers you the chance to engage with academics at the forefront of cutting-edge Rubber Industrial research and to contribute to solving some of our global challenges. The launch of the Online Certificate Course on Rubber At IRMRA. you will be provided an opportunity to Materials Science and Technology bridges a vital lacuna enhance your intellectual curiosity and train your skills in Rubber Science and Technology Education in the and mind to face future life experiences whatever Country and also paves the way for international direction they take. participation and cooperation. Employers will prefer IRMRA trained students because of It satisfies a long-felt desire, expressed by the Governing the state of readiness to enter the rubber industry. Council, that IRMRA provides a targeted education programme at a reasonable cost, built on its established infrastructure base of Testing, R&D and factory-scale Quite simple, if you have the interest, ability, enthusiasm manufacturing facilities, backed by experienced in- and motivation to participate in a sunrise industry in house and external faculty. India and abroad, then apply to IRMRA as it can meet and match expectations. The trained human resources output will be better equipped and ready to serve in a Rubber Industry that This course provides an opportunity for working persons has positive growth trajectory and projected to be in the in the Rubber Industry to obtain a structured formal top three globally in this decade. education in Rubber Technology that can further enhance both their working experience and the career. The course blends both online theoretical course work with comprehensive video and laboratory practical training and projects for a complete student. This will Dr. R. K. Matthan, President fulfil an important aspect of the Mission that IRMRA has embarked upon. The course is designed for students and working personnel to build and enhance their career in a Rubber Industry with expanding opportunities. It is our ambitious plan to increase the footprint The rubber Industry has an expanding need for skilled of IRMRA across the country by establishing and trained human resources with interdisciplinary branches and expanding IRMRA services across background. the Rubber and Allied MSME sectors and also to extend our services to global rubber community. In this process IRMRA has been set up in the IRMRA provides a sound infrastructure platform with eastern and southern regions. an experienced faculty that enables practical applied rubber technology learning which enhances the prospects of students being absorbed in the Tyre and We have already submitted schemes to seek support Non-Tyre sectors, especially as many have ongoing of the Central Government to create a branch of testing and R&D relationships with IRMRA. IRMRA at Northern region. Apart from these branches, we also submitted proposals to set up incubation-cum- innovation centres at 2nd and 3rd A student would be armed with sound theoretical tier cities to develop more MSME the Rubber sector. knowledge with unparalleled practical exposure, resulting in a shorter learning and factory adaptation period. We strongly believe that starting this long-term Rubber Technology Course coupled with our students and faculty also being involved in industry focused This course also provides an opportunity to recognize Technological Research, would support in achieving working persons in Rubber Industry by way of a the Vision of IRMRA. structured formal education in Rubber Technology. The Indian Rubber Industry currently has a turnover of Rs 850 billion (U$ 12 billion), which Dr. K. Rajkumar, Director could double within this decade. https://www.irmra.org https://www.facebook.com/IRMRA Welcome to IRMRA Welcome to IRMRA We’re proud to be able to say that IRMRA is One of the best Institute in Rubber Technology in the world, and below are just a few reasons why we hope you’ll consider applying to us. • Establish as a recognized • Provide Opportunities to • Support Automotive Tyre Centre for Rubber Industry for Scientists, Technologists Manufacturers and Original Testing and Evaluation of Raw and Engineers to pursue Equipment Manufacturers Materials, Products, Academic and with Advanced Testing Simulation and Modeling, Multidisciplinary Research Product Design Engineering Facilities for Evaluation, Performance and Certification and Development • Enhance the Knowledge and • Provide R & D, Technical, Skills among the people Quality Management Services, engaged in the Rubber Audit and Support to Rubber Industries to upgrade their Industry. Products to compete globally. Mission • Provide R&D, Technical, Quality Management Services and Audit support to MSME and large rubber Industries to upgrade their Products & Processes to compete globally • Establish internationally recognized Centre in Testing and Evaluation of Raw Materials, Rubber Products, Forensic Analysis, Simulation & Modeling, Product Design & Development • Support Tyre manufacturers & Automotive OEMs in advanced Tyre Testing, Evaluation and Certification • Enhance skill and knowledge among the people working in the Rubber and Allied industries through Training, Workshops, Seminars and Conferences • Provide Opportunities to Scientists & Technologists to conduct Academic and Sponsored Research Activities Course Certificate Course in Rubber Materials Science & Technology Duration of Program: 1 Year (2 Semesters) Selection Criteria: Telephonic interview IRMRA Advantage: Flexibility and choice Rubber industry plays an important role in As a premiere institute of research in the field Indian economy, with almost 5,000 of rubber, IRMRA receives continuous manufacturing units primarily producing tyres, requests from the rubber and allied industries tyre-tube & flaps, automotive rubber products, and associated individuals for designing and belts, hoses, footwear products, moulded subsequently conducting a suitable medium goods, foam products, adhesives and latex term course for working professionals’ / based products. With rapidly rising mobility and industry persons to provide the requisite supply chain logistics, there is increasing use of knowledge and skills. rubber products in industries, making rubber technology a lucrative career option. Therefore, job oriented courses is a pressing need of rubber It will literally be an impossible task for the industry, to fuel its need for skilled rubber industries to regularly disengage their employees for extended periods of time, from technologists. their workplace to be properly trained and oriented. To address this issue, IRMRA has Except for the tyre sector and few large introduced an online certificate course manufacturers of rubber products, major meaningfully designed to cater the need of segment of the Indian Rubber Industry lies in the the industries balanced with theoretical as unorganized and MSME sector and the work well as practical content and sessions. force in these sectors often have inadequate knowledge and training in rubber technology. Course Benefits Eligibility Course Benefits Fee Structure Qualification of Inter-mediate or 10+2 along with minimum 1 An online course in rubber Fee for Indian Applicants: Rs year of experience working in technology to facilitate skill and 7000* rubber industry knowledge development of the concerned manpower for the Fee for International Applicants: USD 500* OR rubber industry. To provide an opportunity for * Fee is highly discounted due Diploma/Graduation in young minds to build their career in to pandemic condition, Engineering or Science. the strategic industry with a long - exclusively for this year, term growth potential. inclusive of GST. Further information The industrial connection of IRMRA # Fees paid are non-refundable www.irmra.org provides job-assistance facilities for enrolled candidates. In addition to imparting practical Fee discounts concepts, technological 10 % discount for IRMRA advancement and knowledge, the members programmes would provide the opportunity where the industry’s 5 % discount for AIRIA & ATMA leaders, experienced technologists members and scientists would share their experience. Bank Details for Fee The course will also distinctively Payments provide knowledge of Quality ICICI Bank Limited – Wagle Management System alongside the Industrial Estate, Thane – 400604; certificate course A/C no (Current Account): 188701000046 The programme also facilitates NEFT/IFSC: ICIC0001887 RSDC Certification of candidates GST No. 27AAAAT7089F1Z6; subject to PAN No. AAAAT7089F clearing the assessment conducted by RSDC. Career Career Opportunities Opportunities Students from rubber technology background can find jobs in both private and public sectors. In India the demand for trained personnel are soaring high in the recent times. Effective Resume Writing Techniques Resumes will include experience that demonstrates IRMRA generates awareness among the the skills and knowledge important to a new career students about the industry by organizing as well as the new expertise obtained
Load more

Recommended publications
  • Reinforcement of Styrene Butadiene Rubber Employing Poly(Isobornyl Methacrylate) (PIBOMA) As High Tg Thermoplastic Polymer
    polymers Article Reinforcement of Styrene Butadiene Rubber Employing Poly(isobornyl methacrylate) (PIBOMA) as High Tg Thermoplastic Polymer Abdullah Gunaydin 1,2, Clément Mugemana 1 , Patrick Grysan 1, Carlos Eloy Federico 1 , Reiner Dieden 1 , Daniel F. Schmidt 1, Stephan Westermann 1, Marc Weydert 3 and Alexander S. Shaplov 1,* 1 Luxembourg Institute of Science and Technology (LIST), 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg; [email protected] (A.G.); [email protected] (C.M.); [email protected] (P.G.); [email protected] (C.E.F.); [email protected] (R.D.); [email protected] (D.F.S.); [email protected] (S.W.) 2 Department of Physics and Materials Science, University of Luxembourg, 2 Avenue de l’Université, L-4365 Esch-sur-Alzette, Luxembourg 3 Goodyear Innovation Center Luxembourg, L-7750 Colmar-Berg, Luxembourg; [email protected] * Correspondence: [email protected]; Tel.: +352-2758884579 Abstract: A set of poly(isobornyl methacrylate)s (PIBOMA) having molar mass in the range of 26,000–283,000 g mol−1 was prepared either via RAFT process or using free radical polymerization. ◦ These linear polymers demonstrated high glass transition temperatures (Tg up to 201 C) and thermal Citation: Gunaydin, A.; stability (T up to 230 ◦C). They were further applied as reinforcing agents in the preparation of the Mugemana, C.; Grysan, P.; onset Eloy Federico, C.; Dieden, R.; vulcanized rubber compositions based on poly(styrene butadiene rubber) (SBR). The influence of the Schmidt, D.F.; Westermann, S.; PIBOMA content and molar mass on the cure characteristics, rheological and mechanical properties of Weydert, M.; Shaplov, A.S.
    [Show full text]
  • Long Term Performance of Rubber in Seismic and Non-Seismic Bearings: a Literature Review
    Long Term Performance of Rubber in Seismic and Non-Seismic Bearings: A Literature Review J. W. Martin us. DEPARTMENT OF COMMERCE National Institute of Standards and Technology Building and Fire Research Laboratory Gaithersburg, MD 20899 US. DEPARTMENT OF COMMERCE Robert A. Mosbacher, Secretary NATIONAL INSmUTE OF STANDARDS AND TECHNOLOGY UL John W. Lyons, Director 100 U56 NBT //4615 1991 NATIONAL INSTITUTE OF STANDARDS & TECHNOLOGY Research Information Center Gaithersburg, MD 20899 NISTIR 4613 / Long Term Performance of Rubber in Seismic and Non-Seismic Bearings: A Literature Review J. W. Martin U^. DEPARIMENT OF COMMERCE Nation^ Institute of Standards and Technoiogy Buiiding and Fire Research Laboratory Gaithersburg, MD 20899 June 1991 U.S. DEPARTMENT OF COMMERCE Robert A. Mosbacher, ScK:retary NATIONAL INSrmJTE OF STANDARDS AND TECHNOLOGY John W. Lyons, Director ABSTRACT The use of seismic isolation bearings to decouple buildings and lifeline structures from strong ground motion has received an increased amount of attention in recent years. While several types of seismic isolation bearings have been developed and proposed for use, the most common type is the laminated rubber (elastomeric) bearing. Because the design lifetime of these bearings is expected to be on the order of 50 to 100 years, the long-term performance of the rubber must be addressed. Therefore, a literature review was conducted to identify potential limits on the long-term performance of rubbers used in bearings. Several issues, including the need for consensus performance standards and for additional research on the effects of creep, aging, temperature, and high-energy radiation on the properties of rubber, were identified.
    [Show full text]
  • Exxon™ Butyl Rubber Innertube Technology Manual
    Exxon™ butyl rubber Exxon™ butyl rubber innertube technology manual Country name(s) 2 - Exxon™ butyl rubber innertube technology manual Exxon™ butyl rubber innertube technology manual - 3 Abstract Many bias and radial tires have innertubes. Radial truck tube-type tires are particularly common, and in many instances, such as in severe service, off-road applications, are preferred over tubeless radial tire constructions. The technology requirements for tubes for such tires is, in many respects, equally demanding when compared to that for the tire and wheel in the assembly. This manual has been prepared to describe how butyl rubber is important in meeting the demanding performance requirements of tire innertubes. Representative innertube compound formulations and compound properties are discussed along with typical processing guidelines of the compound in the manufacture of innertubes. Chlorobutyl rubber based compound formulations are also used in innertubes. Such innertubes show good heat resistance, durability, allow greater flexibility in compounding, and process equally well as regular butyl rubber tube compounds. An extensive discussion of bicycle tire innertubes has been included. Service conditions can range from simple commuting and recreation to high speed competitive sporting applications. Like automobile and truck tire innertubes, tubes for bicycle tires can thus have demanding performance requirements. Guidelines on troubleshooting provide a checklist for the factory process engineer to enhance manufacturing efficiency, high
    [Show full text]
  • Model Vulcanization Systems for Butyl Rubber and Halobutyl Rubber Manual
    Exxon™ butyl and halobutyl rubber Model vulcanization systems for butyl rubber and halobutyl rubber manual Country name(s) 2 - Model vulcanization systems for butyl rubber and halobutyl rubber manual Model vulcanization systems for butyl rubber and halobutyl rubber manual - 3 Abstract The vulcanization of isobutylene-co-isoprene rubber (IIR), brominated isobutylene-co-isoprene rubber (BIIR), chlorinated isobutylene-co-isoprene rubber (CIIR), and brominated isobutylene-co-para-methylstyrene elastomer (BIMSM) differs from that of general-purpose rubbers (GPR). Butyl rubber has approximately 2% unsaturation in the backbone. Halobutyl rubber (BIIR and CIIR) incorporates the butyl backbone with either bromine or chlorine, which significantly increases the chemical reactivity of the isoprenyl units located in the butyl backbone. Similarly, in BIMSM the bromine atom is bonded to the para-methylstyrene (PMS) group, thus affording the completely saturated polymer backbone a site of chemical reactivity. Utilization of the unique attributes of butyl rubber and halobutyl rubbers with their minimal backbone unsaturation and of BIMSM elastomers with no backbone unsaturation is found in many areas of industry. These properties are excellent vapor impermeation, resistance to heat degradation, and improved chemical resistance as compared to general-purpose rubbers. However, this low amount of reactivity requires special consideration to vulcanize these isobutylene-based polymers. The type of vulcanization system selected is a function of the composite structure in which it is used, and the cured product performance requirements. Therefore, vulcanization systems vary and may include an accelerator package along with resins, zinc oxide, zinc oxide and sulfur, and quinoid systems. This review will discuss the types and selection of appropriate vulcanization systems for isobutylene-based elastomers.
    [Show full text]
  • Relevance and Development of New Rubber Technology Competences for a Sustainable Automotive Industry
    MASTER THESIS Relevance and development of new rubber technology competences for a sustainable automotive industry Marnick Olthuis Faculty of Engineering Technology (ET) Department of Mechanics of Solids, Surfaces and Systems (MS3) Elastomer Technology and Engineering (ETE) EXAMINATION COMMITTEE Prof. Dr. Anke Blume Asst. Prof. Dr. Fabian Grunert Asst. Prof. Dr. Laurent Warnet March 2020 Master graduation thesis Faculty of Engineering Technology Department of Mechanics of Solids, Surfaces and Systems (MS3) Elastomer Technology and Engineering (ETE) Title Relevance and development of new rubber technology competences for a sustainable automotive industry Student Marnick Olthuis (M.J.A.) 1380605 Supervisors Prof. Dr. Anke Blume Asst. Prof. Dr. Fabian Grunert Graduation committee Prof. Dr. Anke Blume Asst. Prof. Dr. Fabian Grunert Asst. Prof. Dr. Laurent Warnet ii Acknowledgement It has been a great learning experience to work for the DRIVES project in co-operation with Fabian Grunert and Anke Blume. I would like to express my gratitude towards them for facilitating this type of master graduation assignment. I would like to thank the staff and members of the Elastomer Technology and Engineering group. The working environment in the group is stimulating and the members are always available for helping you out. This open-minded mentality has been fruitful for thoroughly understanding the content and relevance of this graduation research project. Special thanks to Jungmin, who has been my personal rubber consultant for the past years. I want
    [Show full text]
  • (Pp)/ Ground Tire Rubber
    MANUFACTURING OF POLYPROPYLENE (PP)/ GROUND TIRE RUBBER (GTR) THERMOPLASTIC ELASTOMERS USING ULTRASONICALLY AIDED EXTRUSION A Thesis Presented to The Graduate Faculty of The University of Akron In Partial Fulfillment of the Requirements for the Degree Master of Science Jieruo Liu August, 2013 MANUFACTURING OF POLYPROPYLENE (PP)/ GROUND TIRE RUBBER (GTR) THERMOPLASTIC ELASTOMERS USING ULTRASONICALLY AIDED EXTRUSION Jieruo Liu Thesis Approved: Accepted ______________________ _______________________ Advisor Department Chair Dr. Avraam I. Isayev Dr. Robert Weiss _______________________ _______________________ Committee Member Dean of the College Dr. Thein Kyu Dr. Steven Cheng _______________________ ________________________ Committee Member Dean of the Graduate School Dr. Younjin Min Dr. George Newkome ________________________ Date ii ABSTRACT Compounding ground tire rubber (GTR) from whole waste tires with thermoplastic polyolefins, such as polypropylene (PP), is a possible way to manufacture thermoplastic elastomers and also to recycle waste tires to solve a major environmental problem. The present study looks at the effect of PP/GTR mixing ratio, rubber particle size, type of extruder, maleic anhydride grafted polypropylene (PP-g-MA) compatibilizer and ultrasound on the mechanical and rheological properties of PP and PP/GTR blends. PP and GTR were compounded at ratios of 30/70, 50/50 and 70/30. Whole tire GTR particles of 40 and 140 mesh sizes were used. Both the single screw extruder (SSE) and twin screw extruder (TSE) without and with ultrasonic treatment were applied. PP-g-MA compatibilizer was added to PP/GTR 50/50 blends at concentration of 10 wt %. Rheological, tensile and impact properties of uncompatibilized and compatibilized PP/GTR 50/50 blends were compared.
    [Show full text]
  • Rubber Division ACS Best Paper Awards
    Rubber Division ACS Best Paper Awards The Best Paper Committee of Rubber Division, ACS seeks to improve the quality of technical presentations by evaluating and publicly recognizing the authors of outstanding papers presented our technical meetings. Each year Committee Judges and peer attendees, rate each presentation on quality of content, originality, and clarity. Winning papers are selected from the top-rated presentations after further review by the Best Paper Committee. The Best Symposium is awarded to the symposium with the highest average paper ratings and best average attendance of presentations. Meeting Year Award Authors/Moderators Affiliation Title 196th, Fall 2019 Best Paper Steven K. Henning & Fabien Total Cray Valley Silane-Terminated Liquid Poly(butadienes) in Tread Formulations: A Mechanistic Study 196th, Fall 2019 Best Symposium Ed Terrill & Crittenden ARDL, Inc. & University of Testing and Predicting Behavior of Rubber and Tires Ohlemacher Akron 194th, Fall 2018 Best Paper Nuthathai Warasitthinon and Cooper Tire & Rubber Co. The Payne Effect: Primarily Polymer-Related or Filler-Related Phenomenon? Chris Robertson 194th, Fall 2018 Pest Symposum Cal Moreland & Sy Mowdood Michelin USA & Pirelli Advances in Material and Processes of Car and Truck Tires (Retired 192nd, 2017 Best Paper Anke Blume*, Katarzyna S. University of Twente, Influence of Network Structure on Elastomer Properties Fall Bandzierz, Louis A.E.M. Netherlands Reuvekamp, Jerzy Dryzek, Wilma K. Dierkes, Dariusz M. Bielinski 192nd, 2017 Best Symposium Crittenden Ohlemacher & University of Akron & Characterization Tools for Elastomers Fall Michael Warner CCSI, Inc. 190th, Fall 2016 Best Paper Peter Mott U.S. Naval Research The Thermomechanical Response of Polyurea Laboratory, Chemistry Division 190th, Fall 2016 Honorable Mention Steven K Henning and Taejun Yoo Total Cray Valley The Synthesis and Characterization of Farnesene-Based Oligomers 190th 2016 Best Symposium Sy Mowdood and J.
    [Show full text]
  • Elastomeric Materials
    ELASTOMERIC MATERIALS TAMPERE UNIVERSITY OF TECHNOLOGY THE LABORATORY OF PLASTICS AND ELASTOMER TECHNOLOGY Kalle Hanhi, Minna Poikelispää, Hanna-Mari Tirilä Summary On this course the students will get the basic information on different grades of rubber and thermoelasts. The chapters focus on the following subjects: - Introduction - Rubber types - Rubber blends - Thermoplastic elastomers - Processing - Design of elastomeric products - Recycling and reuse of elastomeric materials The first chapter introduces shortly the history of rubbers. In addition, it cover definitions, manufacturing of rubbers and general properties of elastomers. In this chapter students get grounds to continue the studying. The second chapter focus on different grades of elastomers. It describes the structure, properties and application of the most common used rubbers. Some special rubbers are also covered. The most important rubber type is natural rubber; other generally used rubbers are polyisoprene rubber, which is synthetic version of NR, and styrene-butadiene rubber, which is the most important sort of synthetic rubber. Rubbers always contain some additives. The following chapter introduces the additives used in rubbers and some common receipts of rubber. The important chapter is Thermoplastic elastomers. Thermoplastic elastomers are a polymer group whose main properties are elasticity and easy processability. This chapter introduces the groups of thermoplastic elastomers and their properties. It also compares the properties of different thermoplastic elastomers. The chapter Processing give a short survey to a processing of rubbers and thermoplastic elastomers. The following chapter covers design of elastomeric products. It gives the most important criteria in choosing an elastomer. In addition, dimensioning and shaping of elastomeric product are discussed The last chapter Recycling and reuse of elastomeric materials introduces recycling methods.
    [Show full text]
  • Dry Rubber Technology (3 Days)
    LEMBAGA GETAH MALAYSIA DRY RUBBER TECHNOLOGY (3 DAYS) INTRODUCTION METHODOLOGY Lectures, Discussions and Demonstrations Rubber Technology is a combination of art and science of processing, fabricating and converting rubbers into COURSE FEES useful products. Hence, it covers science/chemistry of 1. Local participant RM 200.00/person /day 2. Foreign participant RM 200.00/person / day materials, machines/equipments and quality assurance Meals ‐ RM 50.00 person / day in the rubber product manufacturing industry. Lodging ‐ RM 80.00 room / day This course is designed to give a basic understanding of VENUE dry rubber technology and its product manufacturing Akademi Hevea Malaysia processes to all personnel at the production and Lembaga Getah Malaysia supervisory levels who are directly and indirectly 47000 Sungai Buloh involved in the manufacture of rubber products. Selangor Darul Ehsan OBJECTIVES LECTURERS To acquire knowledge about various rubber Dr. Md Aris Ahmad. Rubber compounding and formulation designs, moulding and extrusion types, grades, characteristics and applications. studies. Involved in the Common Fund for Commodities (CFC) Project on Rubber‐rubber blends, particularly for NR / EPDM blends for Automotive To be familiar with compounding ingredients, applications. Also involved in the development of NR‐based their specifications and standards including their Thermoplastic materials. Chairman for MRB’s Malaysian Standard Technical Committee on General Rubber Goods and MRB MS ISO 9001 storage/shelf life, hazardous nature and safe Quality Audit Committee. He was the Head of the Advanced Rubber handling. Technology Unit, MRB and now a Research Fellow in MRB. Published more than 50 scientific papers presented at International To enhance the knowledge and skills of Rubber Conference , Refereed Journals , seminars , workshops, etc.
    [Show full text]
  • Scrap Tire Recycling in Canada
    CANMET Materials Technology Laboratory Scrap Tire Recycling in Canada A reference for all parties involved in the tire recycling industry on the options available for end-of-life OTR and passenger tires from an economic and environmental perspective Alexandra Pehlken and Elhachmi Essadiqi MTL 2005-08(CF) August 2005 Work on this project was funded by the Enhanced Recycling Program of Action Plan 2000 on Climate Change. CANMET-MTL DISCLAIMER Natural Resources Canada makes no representations or warranties respecting the contents of this report, either expressed or implied, arising by law or otherwise, including but not limited to implied warranties or conditions of merchantability or fitness for a particular purpose. ________________________________________________ CANMET-MTL i Scrap Tire Recycling in Canada Climate Change CANMET MATERIALS TECHNOLOGY LABORATORY REPORT MTL 2005-8(CF) SCRAP TIRE RECYCLING IN CANADA by A. Pehlken and E. Essadiqi ABSTRACT This report was supported by the Enhanced Recycling Program of Action Plan 2000 on Climate Change (managed by the Mineral and Metals Sector of Natural Resources Canada). Data from the provinces and the Canadian Association of Tire Recycling Agencies (CATRA) were collected from August 2004 to February 2005 with the objective of developing a clear picture of tire recovery and recycling in Canada, and the environmental impacts – including greenhouse- gas emissions (GHG) – of current and future practices. This study of “Scrap Tire Recycling in Canada” shows there is a great market potential for the processing of scrap tires into new applications and value-added products. Thanks to well- operated tire programs in nearly every Canadian province (only Ontario is currently developing its program), scrap tires are now being processed using several techniques.
    [Show full text]
  • Environmental Comparison of Michelin Tweel™ and Pneumatic Tire Using Life Cycle Analysis
    ENVIRONMENTAL COMPARISON OF MICHELIN TWEEL™ AND PNEUMATIC TIRE USING LIFE CYCLE ANALYSIS A Thesis Presented to The Academic Faculty by Austin Cobert In Partial Fulfillment of the Requirements for the Degree Master’s of Science in the School of Mechanical Engineering Georgia Institute of Technology December 2009 Environmental Comparison of Michelin Tweel™ and Pneumatic Tire Using Life Cycle Analysis Approved By: Dr. Bert Bras, Advisor Mechanical Engineering Georgia Institute of Technology Dr. Jonathan Colton Mechanical Engineering Georgia Institute of Technology Dr. John Muzzy Chemical and Biological Engineering Georgia Institute of Technology Date Approved: July 21, 2009 i Table of Contents LIST OF TABLES .................................................................................................................................................. IV LIST OF FIGURES ................................................................................................................................................ VI CHAPTER 1. INTRODUCTION .............................................................................................................................. 1 1.1 BACKGROUND AND MOTIVATION ................................................................................................................... 1 1.2 THE PROBLEM ............................................................................................................................................ 2 1.2.1 Michelin’s Tweel™ ................................................................................................................................
    [Show full text]
  • Rubber Compounding for Improvements in Health, Safety and the Environment
    SYNTHESIS REPORT For Publication CONTRACT N° : BRRT – CT97 - 5018 PROJECT N° : BE – T2 - 0511 TITLE : Rubber compounding for improvements in health, safety and the environment PROJECT CO-ORDINATOR : TARRC/MRPRA PARTNERS : BTR-AVS, CSIC, CTTM, DSM ELASTOMERS, FLEXSYS, FORSHEDA, FREUDENBERG, HATCHAM, HUTCHINSON SSLI/LIG, METEOR, PIRELLI, RHODIA, SEMPERIT, SP, TARRC/MRPRA, TRELLEBORG, WOCO REFERENCE PERIOD : FROM 1st September 2000 TO 30th November 2001 STARTING DATE : 1st September 1997 DURATION : 48 months + 3 months extension Date of issue of this report : December 2001 Project funded by the European Community either under the ‘IMT/SMT’ Programmes (1994- 1998) 1. CONTENTS OF THE SYNTHESIS REPORT Page 2. SUMMARY 2 2.1 Keywords 2 2.2 Abstract 2 3. THE CONSORTIUM 4 3.1 Partner Organisations 4 3.2 Consortium Descriptions 6 3.2.1 Structure of Consortium 6 3.2.2 Profile of each participant 6 4. NETWORK ACHIEVEMENTS 11 4.1 Objectives 11 4.2 Strategic Aspects 11 4.3 Principal Network Tasks 12 4.4 Training and Technology Transfer 14 4.5 State-of-the-Art Reports 15 5. EXPLOITATION AND DISSEMINATION 17 6. REFERENCES 20 6.1 TN Open Seminar 26 Sept 2001 20 6.2 Journée Technologique 20 Nov 2001 21 6.3 TN dissemination 29 Nov 2001 22 6.4 TN dissemination 20 Jun 2002 23 6.5 Sources of information 24 6.6 General references 25 1 2. SUMMARY 2.1 Keywords Rubber compounding, safe chemicals, nitrosamine-free compounds, polyaromatic hydrocarbons, factory environment, fumes, odour, food contact, potable water contact, waste reduction, recycling, rubber proteins, mould fouling.
    [Show full text]