DOCSLIB.ORG

Grain/Feed Industry Manufacturers/Suppliers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Grain/Feed Industry Manufacturers/Suppliers GRAIN/FEED INDUSTRY MANUFACTURERS/SUPPLIERS COMPANY MAILING ADDRESS CITY, STATE, ZIP PHONE NO. TOLL-FREE FAX WEBSITE/E-MAIL CONTACT A & J Mixing International Inc. 8-2345 Wyecroft Road Oakville ON L6L 6L4 905-827-7288 800-668-3470 905-827-5045 ajmixing.com A.B. (Bliss) Flower A&L Analytical Labs 411 N. Third St. Memphis TN 38105 901-527-2780 800-264-4522 901-527-1031 Richard Large A. Epstein and Sons Intl 600 W. Fulton St. Chicago IL 60661 312-454-9100 312-559-1217 epstein-isi-com Andrea Velasquez A.R. McKay Processing PO Box 96 Hickory NC 28603 828-328-3548 828-324-7787 armckay.com Robert Wright ABC Industries 26709 Meridian Road Mendota IL 61342 815-539-6721 800-245-0361 815-539-5255 abcindustries.com Tom Duffy ABCO Engineering Corp. 801 Second Ave. SE Oelwein IA 50662 319-283-5652 319-283-2600 abcoveyor.com Robert W. Ruark Abel Mfg. Co., Inc. P.O. Box 757 Appleton WI 54912 920-734-4443 920-734-1084 abel-usa.com Donald H. Abel Abresist Corp. PO Box 38 Urbana IN 46990 219-774-3327 219-774-3832 abresist.com Joe Accetta Accu-Fab & Construction Inc. PO Box 208 Pascagoula MS 39568 228-475-0082 800-297-9146 228-475-0908 Jack Sandidge AccuRate PO Box 208 Whitewater WI 53190 262-473-2441 800-558-0184 262-473-4384 sarinc.com Tina Carpenter ACECO 5355 Dietreich Rd San Antonio TX 78219-2909 210-661-4111 210-662-6177 ace-co.com Dan Faubel Acrison, Inc. 20 Empire Blvd. Moonachie NJ 7074 201-440-8300 201-440-4939 acrison.com Terry Shaw Action Pest Control PO Box 5467 Evansville IN 47716 812-477-5546 812-473-3431 actionpest.com Kevin Pass ADI Supply 216 4th ST SE Steele ND 58482 701-475-2128 800-225-5201 701-475-2129 Kent Brandt Advance Trading, Inc. PO Box 1027 Bloomington IL 61702-1027 309-663-9021 800-747-9021 309-663-2375 advance-trading.com Robert Sondag Advanced Automations Inc. PO Box 26028, Northgate RO Regina SK S4R 8R7 306-721-9229 800-299-7904 306-721-9222 pmtgroup.com Kelly Lefebvere Advanced Communications 210 W. Locust St. Fairbury IL 61739 815-692-2377 815-692-4458 adcom2000.com Frank Pulliam Advanced Drainage Systems 3300 Riverside Dr. Columbus OH 43221 614-457-3051 800-733-7473 614-538-5204 ads-pipe.com Kevin Rapp Advanced Finishes 2040 Hwy 75 North Sioux City IA 51105 712-255-9874 800-744-5104 712-255-9882 Ben Martin Aeroglide Corp. P.O. Box 29505 Raleigh NC 27626 919-851-2000 800-722-7483 919-851-6029 aeroglide.com Fred Kelly Aerzen USA Corp. 645 Sands Court Coatesville PA 19320 610-380-0244 800-444-1692 610-380-0278 aerzener.com Pierre Noack Ag Risk Insurance 1700 First Avenue; Eastdale Plaza, Suite 24 Iowa City IA 52240 319-337-2242 319-337-2172 agrisk.com Jack Tank Ag Star Services 5225 NW Beaver Drive Johnston IA 50131 515-727-1426 877-856-0060 515-727-1423 Jim Dietrich Ag Vacs Inc. PO Box 443 Batavia IL 60510 630-879-0490 630-879-0231 Chuck Karas Ag-Re Appraisals 218 Central Ave. No. Faribault MN 55021 507-334-3031 507-334-2395 [email protected] Geirge Sllinkard, ARA Ag-Central,Websoft Inc. PO Box 5344 Bloomington IL 61702-5344 309-821-1070 309-821-0154 ag-central.com Jerry Jacobs Ag Dryer Services, Inc. PO Box 450 Elm Creek NE 68836 308-856-4636 800-657-2184 306-856-4641 agdryer.com Gary Stromberg Ag Express Electronics Inc. (IA) 6280 NE 14th Street Des Moines IA 50313 515-289-2746 515-289-2754 agexpress.com Roger Andersen Aggreko Inc. 4607 W. Admiral Doyle Dr. New Iberia LA 70560 318-367-7884 800-443-2447 318-367-0870 aggreko.com Joe Jefferies Ag-Industrial Millwright Service Inc. 252 Knox Hwy. 10 Galesburg IL 61401 309-341-0209 888-462-5212 309-341-0215 [email protected] John Krupps AGRA Construction Company 1211 W. Water St. Merrill WI 54452 715-536-9584 800-842-8033 715-536-9587 agradm.com Pat Hinner Agra Erectors, Inc. PO Box 635 Greenville OH 45331 937-548-6338 937-548-6726 agraerectors.com Gregory A. Swabb Agra Placements, Ltd. 2200 N Kickapoo Suite #2 Lincoln IL 62656 217-735-4373 217-732-2041 agraplacements.com Doug Rice Agri-Data Systems, Inc. 1831-H Forest Dr. Annapolis MD 21401 410-267-5540 410-267-5542 agri-data.com Alice Pensmith Agri-Network Recruiters PO Box 78126 Indianapolis IN 46268 317-251-4299 317-251-9317 agri-networkrecruiters.com Dwaine Nault Agri-Products Inc. PO Box 542 York NE 68467 800-288-1117 402-362-5478 agriproductsinc.com Don Freeman Agri-Systems 1300 Minnesota Ave. Billings MT 59101 406-245-6231 406-245-6236 agrisystems.net Matt Hamlin Agri/Industrial Division of Chief PO Box 848 Kearney NE 68848 308-237-3186 800-359-7600 308-237-2650 chiefind.com Craig Poolman AGRI Associates Two Brush Creek Blvd. Ste.130 Kansas City MO 64112 816-531-7980 800-394-6638 816-531-7982 agriassociates.com Glenn Person Agri Careers, Inc. Box 307 New Hampton IA 50659 515-394-3145 800-394-6638 515-394-3406 agricareersinc.com Roy Holland Agri Comm Ltd 5351 1st St. Katy TX 281-391-8855 281-391-3202 agricommltd.com Michael Morales AgriChem, Inc. 15760 Lincoln St. NE #5 Ham Lake MN 55304-5535 763-434-6755 800-533-4385 763-434-1577 grainprep.com Dave Greer AgriCom 225 Peachtree Street NE, Suite 600 Atlanta GA 30303 404-420-5768 888-435-7770 404-525-8705 agricom-usa.com Jennifer C. King Agrico Sales, Inc. P.O. Box 60 Wildorado TX 79098 806-426-3322 800-858-4528 806-426-3397 agricosales.com Frank Kelly Agris Corporation 300 Grimes Bridge Road Roswell GA 30076 770-238-5100 800-795-7995 770-238-5205 agris.com Tom Taylor Web Site: Add http://www. prior to address GRAIN/FEED INDUSTRY MANUFACTURERS/SUPPLIERS COMPANY MAILING ADDRESS CITY, STATE, ZIP PHONE NO. TOLL-FREE FAX WEBSITE/E-MAIL CONTACT Agri-Tech Personnel, Inc. 3113 NE 69th St. Kansas City MO 64119 816-453-7200 816-453-6001 agri-techpersonnel.com Dale Pickering Agro Globe Engineering 7901 Douglas Ave. Ste. C Des Moines IA 50322 515-254-1669 800-538-0104 515-254-1670 [email protected] Dave Ralph Agromatic Ag P.O. Box CH-8637 Laupen Switzerland (+41) 55 256 21 00 (+41) 55 256 21 11 agromatic.com Ulrich Diener AgTrax Technologies PO Box 2044 Hutchinson KS 67504 316-662-0482 316-669-5228 agtrax.com Jeff Jackson AgVision/DMI Computer Tech. 1601 N. Ankeny Blvd. Ankeny IA 50021 515-964-0708 800-759-9492 515-964-0473 dmi-agvision.com Jose Laracuente Air-O-Flex Equipment Company, Inc.PO Box 580363 Minneapolis MN 55458-0363 612-331-4925 612-331-4927 users.uswest.net/~airoflex Richard A. Kostick Aircon Corp. PO Box 80446 Memphis TN 38108-0446 901-452-0230 800-238-9140 901-452-0264 aircon-corporation.com T.L. Edmaiston, President Airfloat/HSI Systems, Inc. 2230 Brush College Rd. Decatur IL 62526 217-423-6001 800-637-1567 217-422-1049 airfloat-hsi.com Carl Yaegel Airmatic Inc. 7317 State Road Philadelphia PA 19136 215-333-5600 800-332-9770 888-964-3866 [email protected] Bill Dougherty Air Pollution Control Systems 714 E. 34th St. Lubbock TX 79404 806-763-9273 800-248-6897 806-769-1310 Steve Cook Alanco Environmental Mfg. Inc. PO Box 398 Falls City NE 68355 402-245-2325 800-500-9777 402-245-5196 alancomfg.com Dennis Maze Albarrie Environmental Services 85 Marrow Rd Barrie ON L4N 3V7 705-737-0551 705-737-4044 albarrie.com John Handy Alimak Elevator Company 1100 Boston Ave Bridgeport CT 06610 203-367-7400 800-525-4625 203-367-9251 alimakamericas.com Denise Walsh All-State Belting Co. 520 S. 18th St. W. Des Moines IA 50265 515-223-5843 800-247-4178 515-223-8305 all-stateind.com Dave Gaer Allan Inc. Sandblasting & Painting 24048 Butler Center Rd. Allison IA 50602 319-267-2292 800-257-6959 319-267-2254 Dave Allan Allen Electronics PO Box 810 Diablo CA 94528 925-855-9934 925-855-9801 John Howe Allen Foster Enterprises, Inc. 611 Bush Dr. Allen TX 75013 972-727-3162 972-727-1882 Allen Foster Allendale, Inc. 4506 Prime Parkway McHenry IL 60050 815-363-5500 800-262-7538 815-363-5511 allendale-inc.com Paul Georgy, President/CEO Alliance Production 7313 W Jefferson Blvd Ft Wayne IN 46804 219-459-3663 219-436-4963 Russ Wilkin Allied Equipment Sales 1821 University Ave. #171 N. St. Paul MN 55104 651-646-8277 800-335-3026 651-641-7234 allied-equipment.com Bernie Lamb Allied Millwrights, Inc. PO Box 5 Hereford TX 79045 806-364-4621 800-447-9007 806-364-4630 Jim Taylor Allied-Locke Inds., Inc. 1088 Corregidor Dixon IL 61021 815-288-1471 800-435-7752 815-288-7945 alliedlocke.come Joe Rock Alloy Hardfacing 20425 Johnson Memorial Dr. Jordan MN 55352 612-492-5569 800-328-8408 612-492-3100 alloy-inc.com Tom Mosford Alltech, Inc. 3031 Catnip Hill Pike Nicholasville KY 40356 606-887-3242 606-887-3256 alltech-bio.com Domenick Castaldo, PhD ALM Inc. 1058 S. Vanderventer St. Louis MO 63110 314-531-1530 900-444-0442 314-531-0513 Robert Schmitt Amarillo Aeration & Temp. Co. Dryer Div. Route 6 Box 151 Amarillo TX 79124 806-374-4235 800-344-4644 806-374-2252 Bob Amark Packaging Systems P.O.
Load more

Recommended publications
  • Application-Carpenter-Millwright-Floor Layer-Lather-Piledriver- Cabinetmaker Apprenticeship Program
    APPLICATION FOR APPRENTICESHIP PROGRAM YOU MUST BE 17 YEARS OF AGE TO BE IN THIS PROGRAM LOG #(S):______________________________________________ UBC ID:__________________________ I hereby make application for the __________________________________________________Apprenticeship Program. (List all trades interested in) NAME ____________________________________________________ DATE OF BIRTH Last First Middle Initial ADDRESS CITY STATE ZIP HOME PHONE CELL PHONE EMAIL _____________________________________________ GENDER ______ ETHNICITY __________________ 1. Are you at least 17 years of age? Yes No 2. Do you have a high school Diploma or GED? Yes No Date:__________________________ If no, what is the highest level of education completed? ______________________________________ 3. Are you aware that it may be necessary to comply with City, County, State or Federal requirements for work permits, health and safety permits, licenses or citizenship as required by law? Yes No 4. Are you a U.S. Military veteran? Yes No Branch ____________ Yr. Discharged ______Yrs. Service____ If yes, are you registered with helmets to hardhats? Yes No 5. Did you learn about the trades from a source other than a friend or family member? Yes No If yes, how did you learn about apprenticeship? _____________________________________________________ 6. Mark the appropriate box indicating the total number of months of work experience in any of the trades below. Can you provide documentation for all previous construction related work history? Yes No a. None b. 1-6 Months c. 7-12 Months d. 13-18 Months e. 19-24 Months f. 25-30 Months Concrete Forms Finish Carpentry Residential Frame Metal Frame Millwright Insulation Cabinet Maker Floor Layer Pile Driver Mechanic Acoustical Ceiling Drywall Drywall Finishing Plastering Machinist 7.
    [Show full text]
  • ASC-GIEC List of Degrees and Careers
    ASC-GIEC List of Degrees and Careers College Degree Original Career list APS PVNGS SRP (Career Levels) TEP AAS Electric Electric Utility Lineworker Design Technician TEP – T&D Design Utility Design Design Electrician Lineworker Technology Technician Polyphase Cable Splicer Chandler- Cable splicers Meterman Gilbert Designer Community AAS Electric Lineworker Lineworker Lineworker TEP T&D College Utility Electrician Substations Relay Tech. Technology Substation Electrician Lineman Technician (Lineworker) Relay Technician Troubleman Metering Tech. Meter Technician Polyphase Distribution Meterman Cable Splicer Designer Automobile Automobile Heavy Equip. Ops Mechanic Mechanic Elect./Comm. Metal Fabricator Electrician Machinist Electric Repair Plant Electrician and Test Shop Plant Mechanic Electrician Construction and Automotive Maintenance Mechanic Repairer Design Technician CCL Electric Lineworker Lineworker Lineworker TEP T&D – Lineman Utility Electrician Substations (Lineworker) Technology Polyphase Electrician Relay Technician Meterman Meter Technician Cable Splicer 1 ASC-GIEC List of Degrees and Careers Automobile Mechanic Metal Fabricator Machinist Plant Electrician Plant Mechanic Construction and Maintenance Repairer AAS Engineering Engineering Engineering Technician Technician Technology I & C Relay Technician Technician Communications E&I Technician Technician Boilermaker Control Technician Millwright Electrical Repairman Pipefitter OR Pathway to Eng. Bachelor’s; Elect,
    [Show full text]
  • Job Opening: Tig Welder Millwright
    Job Opening: Tig Welder Millwright Position Overview The role of Journeyman Tig Welder Millwright is to compliment our current team of technicians and assist Knack’s food and beverage customer base with advanced welding, fabrication, and industrial support, to maintain and improve their processing operations. The scope ranges anywhere from day to day maintenance or welding repairs, up to the plant project scale. This takes place on the customer job site or at our shop. Required Personal Responsibilities: • Display Initiative and ability to work self-sufficiently with minimal supervision. Journeyman level experience. • Ability to be resourceful and independently creative to get the job done under pressure or tight timelines. • Work within a team environment and maintain a positive attitude. • Professional, informative, and responsive communication to the manager, staff and customers. • Interacts with customers to understand their requests or concerns. • Interacts with customers to provide feedback on job completion or the necessary performance of tasks. • Must be able to respond to plant emergencies as directed outside of normal working hours. • Operation, maintenance and repair of responsible tools and equipment. • High level of integrity. Required Technical Skills: • Understand, install, troubleshoot and maintain various types of food processing equipment including but not limited to: pumps, conveyors, agitators, tanks, exchangers, valving, etc. • Advanced Journeyman level sanitary stainless steel tig welding experience. • Journeyman ability to design, fabricate and build basic and/or complex structures, supports or framework. • Ability to perform oxy fuel and plasma cutting processes. • Perform safe rigging procedures for lifting or installing various equipment. • Perform demolition of equipment/systems and the ability to properly isolate, rig and remove safely and in proper sequence.
    [Show full text]
  • Terry O'neil Mine Inspector St. Louis County 307 South First Street Virginia, MN 55792 218-7 42-9841 Joseph Austin Safety &
    This document is made available electronically by the Minnesota Legislative Reference Library as part of an ongoing digital archiving project. http://www.leg.state.mn.us/lrl/lrl.asp the Terry O'Neil Joseph Austin Mine Inspector Safety & Risk Mgmt.' Director St. Louis County St. Louis County 307 South First Street 2503 Rice 'Lak~ Road Virginia, MN 55792 Duluth, MN 55811 218-7 42-9841 218-726-2139 The ANNUAL REPORT of the INSPECTOR OF MINES St. Louis County, Minnesota ******************** 2013 ******************** INSPECTOR OF MINES SAFETY & RISK MANAGEMENT DIRECTOR Terry O'Neil Joseph J. Austin 616 S. Main Street, Box 294 5888 Sunny Lane Biwabik, Minnesota 55708 Caribou Lake, MN 55811 HOME PHONE: 218-865-6978 OFFICE PHONE: 218-742-9841 OFFICE PHONE: 218-726-2139 CEll PHONE: 218-780-1306 CELL PHONE: 218-348-0355 E-MAIL: oneilt@ stlouiscountymn.gov E-MAIL: [email protected] FAX: 218-471-7270 FAX: 218-722-8860 ASSISTANT MINE INSPECTOR ASSISTANT MINE INSPECTOR Paul Wier Steve Manninen 2311 Station 44 Road 4502 Cedar Island Drive Eveleth, Minnesota 55734 Eveleth, Minnesota 55734 HOME PHONE: 218-744-2806 HOME PHONE: 218-744-2817 OFFICE PHONE: 218-742-9843 OFFICE PHONE: 218-742-9840 OFFICE AT NORTHLAND OFFICE BUILDING 307 South First Street, Virginia, Minnesota 55792 PHONE: 218-742-9841 ****************** THE ST. LOUIS COUNTY BOARD OF COMMISSIONERS District 1 .............................................................. Frank Jewel, Duluth, Minnesota District 2 ............................................................ Steven O'Neil, Duluth, Minnesota Angie Miller, Duluth, Minnesota District 3 .......................................................... Chris Dahlberg, Duluth, MiP.nesota District 4 ................................................................ Mike Forsman, Ely, Minnesota District 5 ................................................... Pete Stauber, Hermantown, Minnesota District 6 ............................................................ Keith Nelson, Virginia, Minnesota District 7 .....................................................
    [Show full text]
  • Continuing Education
    Summer 2018 Schedule CONTINUING EDUCATION New Construction Trade Classes www.com.edu/ce/harveyconstructiontrades MECHANICAL MAINTENANCE TECH STUDENT LEARNS FROM THE BEST Melvin Robertson is just one of three mechanical maintenance technician students who received an apprenticeship with INEOS Olefins & Polymers in 2017. Robertson, now at INEOS Chocolate Bayou, was introduced to COM’s mechanical maintenance technician program by a coworker at Zachary who was also a previous student of the COM program. Although Robertson was already in the field, he knew the importance of having training and a certificate. “Employment opportunities increase at a company like INEOS by having that certificate,” he said. “A certificate and the hands-on experience you get in the field prepares you for a job.” Once he started the program, Melvin realized he was going to gain valuable knowledge from COM’s instructors. “I hadn’t taken math since high school, but I learned so much from Mr. Himel,” he said. “Mr. Himel started with the basic addition and brought us all the way to trigonometry. “The instructors have your best interest at heart and want you to learn so you can be successful.” Instructors bring years of field experience to the classroom. “Mr. Lloyd Lindsey knew everything about rotating equipment, and his knowledge showed in his teachings. He made sure we knew it, too,” Melvin added. The need for qualified industrial craft instructors is increasing due to the demand for more skilled workers in the field of mechanical maintenance technician, machinist, electrical, HVAC, instrumentation, pipefitting and welding. College of the Mainland hires instructors with experience in the field and have a desire to train the next generation of craft professionals.
    [Show full text]
  • Apprenticeship Curriculum Standard Industrial Mechanic (Millwright)
    Apprenticeship Curriculum Standard Industrial Mechanic (Millwright) Trade Code: 433 A Construction Millwright Trade Code: 426A Level 1 Common Core Date: 2005 Please Note: Apprenticeship Training and Curriculum Standards were developed by the Ministry of Training, Colleges and Universities (MTCU). As of April 8th, 2013, the Ontario College of Trades (College) has become responsible for the development and maintenance of these standards. The College is carrying over existing standards without any changes. However, because the Apprenticeship Training and Curriculum Standards documents were developed under either the Trades Qualification and Apprenticeship Act (TQAA) or the Apprenticeship and Certification Act, 1998 (ACA), the definitions contained in these documents may no longer be accurate and may not be reflective of the Ontario College of Trades and Apprenticeship Act, 2009 (OCTAA) as the new trades legislation in the province. The College will update these definitions in the future. Meanwhile, please refer to the College’s website (http://www.collegeoftrades.ca) for the most accurate and up-to-date information about the College. For information on OCTAA and its regulations, please visit: http://www.collegeoftrades.ca/about/legislation-and-regulations Ontario College of Trades © Level 1 - Industrial Mechanic (Millwright)/Construction Millwright TABLE OF CONTENTS Introduction...................................................................................................... 1 Summary of Total Program In-School Training Hours ................................
    [Show full text]
  • Industrial Mechanic Millwright Manufacturing and Engineering Technology
    Technical Description Industrial Mechanic Millwright Manufacturing and Engineering Technology © WorldSkills International TD48 v7.0 WSC2019 WorldSkills International, by a resolution of the Competitions Committee and in accordance with the Constitution, the Standing Orders and the Competition Rules, has adopted the following minimum requirements for this skill for the WorldSkills Competition. The Technical Description consists of the following: 1 INTRODUCTION ................................................................................................................................. 2 2 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) .............................................................. 4 3 THE ASSESSMENT STRATEGY AND SPECIFICATION ..................................................................... 11 4 THE MARKING SCHEME .................................................................................................................. 12 5 THE TEST PROJECT .......................................................................................................................... 15 6 SKILL MANAGEMENT AND COMMUNICATION ............................................................................ 18 7 SKILL-SPECIFIC SAFETY REQUIREMENTS ....................................................................................... 19 8 MATERIALS AND EQUIPMENT ....................................................................................................... 20 9 SKILL-SPECIFIC RULES ....................................................................................................................
    [Show full text]
  • APA 6 Dissertation Template
    A Hands-on Project to Promote Student Engagement and Motivation in High School Metal Shop by Alan Feustel Bachelor of Education, University of British Columbia, 2000 A Project Submitted in Partial Fulfillment of the Requirements for the Degree of MASTERS OF EDUCATION in the Department of Curriculum and Instruction © Alan Feustel, 2015 University of Victoria All rights reserved. This project may not be reproduced in whole or in part, by photocopy or other means, without the permission of the author. ii Abstract Supervisory Committee: Dr. James Nahachewsky (Department of Curriculum and Instruction) Supervisor Dr. Tim Pelton (Department of Curriculum and Instruction) Committee member Student motivation and engagement and how they can be used to create hands-on projects in the high school metalshop were examined. Project selection is critical to the success of elective courses; not only do the projects need to satisfy the learning outcomes of the course, but they must also motivate and engage students. Current literature about student motivation, engagement and mindset, as well as personal observation of students in my own classroom were used to provide a foundation for the selection and development of a hands-on project for a high school metalworking class. A 2 x 72 inch variable speed belt grinder was chosen as a project for senior metalworking students. This project was carefully designed to make it accessible for students and a set of detailed instructions known as a cookbook was created to assist in maintaining student motivation while building this challenging hands-on project. iii Dedication I would like to dedicate this project to three men who in one way or another helped shape the person I am today.
    [Show full text]
  • London Artisans and Its Old Artisans – Millwrights 1775-18251 Part 1
    London Artisans and its old artisans – millwrights 1775-18251 Dr. J.G. Moher - January 2016 Part 1 Abstract Set in the late eighteenth/early nineteenth century metropolis and its environs, this is a study of a small but pivotal group of handicraftsmen, the London master and journeymen millwrights. These mechanical handicraftsmen, harnessed the power sources of those times, mill-wheels and engines driven by water, wind, animal and ’fire’. The nature of the craft is examined in its specific setting of the London region’s services, manufactures and industries of the 1770s onwards, using new original sources derived from research into the changing technology of the trade. Although a tiny group, these handicraftsmen attracted one of the first attempts by Parliament to suppress a trade ‘combination’ by law in 1799, signifying a deeper importance than has previously been appreciated. This study reveals the enormous impact of the millwrights’ trade club activities on the London region’s early brewing, distilling and other manufacturing industries. Part 1 examines the technology of the late eighteenth century millwrighting craft. It then traces the course of the industrial and political struggle between the masters and journeymen which culminated in the masters’ and their ‘employers’ campaign for a Bill to suppress the Journeymen’s Society in 1799. 1 Part 2 takes the story on to the early decades of the nineteenth century, disclosing the continuing industrial battles and Parliamentary struggles for supremacy in the emerging London engineering industry, culminating in the repeal of the journeymen’s key apprenticeship guild laws. The outcome, was the replacement of the medieval master and journeymen system, with its shared control of key features of the trade, by modern employer/employee relationships based an engineers’ economy of individualized terms and conditions.
    [Show full text]
  • Trades Maintenance
    Common Industry Jobs (CIJs) Trades/Maintenance Tool Kit IMIRP program coordinated by: Industrial Council of Advanced Wood & Allied Forest Ergonomics Workers of Industries Inc. Canada In cooperation with the Workers’ Compensation Board of British Columbia 1 TRADES/MAINTENANCE TOOL KIT Table of Contents IMPLEMENTATION NOTES 13 OVERVIEW 15 ! Carpenter 15 ! Chemical Computer Attendant 15 ! Electrician 15 ! Fire Watch 16 ! Heavy Duty Mechanic 16 ! Machinist 16 ! Millwright 17 ! Oiler 17 ! Painter 17 ! Pipefitter 18 ! Plumber 18 ! Welder 18 PHYSICAL DEMANDS ANALYSIS 19 PDA Table of Contents 20 Job Profile 21 Work Organisation 22 ! Task Description 22 Workstation Characteristics 23 ! Dimensions & Layout 23 © 2000 IMIRP Society Trades/Maintenance TOC (revised) 2 ! Flooring, Displays & Seating 24 Equipment & Machinery Controls 25 Physical Demands 26 ! Whole Body Physical Demands 26 ! Body Postures and Movements 27 Manual Material Handling 29 ! Hand Tools 30 Environmental Conditions 31 ! Work Environment 31 ! Location of Workstation 31 ! Temperature 32 Personal Protective Equipment 32 Appendix A – Job Specific Task Lists with Pictures 33 ! Appendix A1 – Carpenter 34 ! Appendix A2 – Chemical/Computer Attendant 37 ! Appendix A3 – Electrician 39 ! Appendix A4 – Fire Watch 42 ! Appendix A5 – Heavy Duty Mechanic 46 ! Appendix A6 – Machinist 49 ! Appendix A7 – Millwright 53 ! Appendix A8 – Oiler 58 ! Appendix A9 – Painter 61 ! Appendix A10 – Pipefitter 64 © 2000 IMIRP Society Trades/Maintenance TOC (revised) 3 ! Appendix A11 – Plumber 67 ! Appendix A12
    [Show full text]
  • Safeguarding Machinery and Equipment: General Requirements
    Safeguarding Machinery and Equipment General Requirements About WorkSafeBC WorkSafeBC (the Workers’ Compensation Board) is an independent provincial statutory agency governed by a Board of Directors. It is funded by insurance premiums paid by registered employers and by investment returns. In administering the Workers Compensation Act, WorkSafeBC remains separate and distinct from government; however, it is accountable to the public through government in its role of protecting and maintaining the overall well-being of the workers’ compensation system. WorkSafeBC was born out of a compromise between BC’s workers and employers in 1917 where workers gave up the right to sue their employers or fellow workers for injuries on the job in return for a no-fault insurance program fully paid for by employers. WorkSafeBC is committed to a safe and healthy workplace, and to providing return-to-work rehabilitation and legislated compensation benefits to workers injured as a result of their employment. WorkSafeBC Prevention Information Line The WorkSafeBC Prevention Information Line can answer your questions about workplace health and safety, worker and employer responsibilities, and reporting a workplace accident or incident. The Prevention Information Line accepts anonymous calls. Phone 604 276-3100 in the Lower Mainland, or call 1 888 621-7233 (621-SAFE) toll-free in British Columbia. To report after-hours and weekend accidents and emergencies, call 604 273-7711 in the Lower Mainland, or call 1 866 922-4357 (WCB-HELP) toll-free in British Columbia.
    [Show full text]
  • SSM-Newsletter-2019-Reduced.Pdf
    The Millwright Serving Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, Oklahoma, South Carolina, Tennessee and Texas | September 2019 Partnerships lead the way in new and emerging industries Emerging Market Feature, page 8 | SSMRC Member Spotlight, page 15 Eastern Region, page 16 | Central Region, page 24 | Western Region, page 32 SSM newsletter 2019 finalish.indd 1 8/6/19 11:57 PM Labor Day Reflection “The 'father' of Labor Day and of May Day, as well as the founder of the United Brotherhood of Carpenters and Joiners of America, Peter J. McGuire was one of the most remarkable figures in the history of the American labor movement. McGuire probably did more than anyone else to convince skeptical, locally minded union activists around the country that a national labor federation was not only necessary but also possible. Without his tireless enthusiasm and practical example, the creation of the AFL and its survival through its early years are practically inconceivable.” – American Federation of Labor and Congress of Industrial Organizations Key People in Labor History “We are responsible for preserving the success of our founding father’s tireless efforts. As the stewards of his legacy, enthusiasm, and conviction of our trade, we celebrate the ‘father’ of Labor Day, Peter J. McGuire.” –SSMRC 2 SouthernStatesMillwrights.org SSM newsletter 2019 finalish.indd 2 8/6/19 11:57 PM UBC MILLWRIGHTS’ STANDARDS OF BEING THE BEST UBC Millwrights understand the relationship between signatory Employers and end-user Customers involves a delicate balance. The behavior exhibited by a few, or in some instances, the actions of simply one individual, can threaten whether an Employer is afforded consideration for future work assignments which inevitably, as a result, affects the livelihoods of fellow Millwrights.
    [Show full text]