Job Opening: Tig Welder Millwright

Total Page：16

File Type：pdf, Size：1020Kb

Job Opening: Tig Welder Millwright Position Overview The role of Journeyman Tig Welder Millwright is to compliment our current team of technicians and assist Knack’s food and beverage customer base with advanced welding, fabrication, and industrial support, to maintain and improve their processing operations. The scope ranges anywhere from day to day maintenance or welding repairs, up to the plant project scale. This takes place on the customer job site or at our shop. Required Personal Responsibilities: • Display Initiative and ability to work self-sufficiently with minimal supervision. Journeyman level experience. • Ability to be resourceful and independently creative to get the job done under pressure or tight timelines. • Work within a team environment and maintain a positive attitude. • Professional, informative, and responsive communication to the manager, staff and customers. • Interacts with customers to understand their requests or concerns. • Interacts with customers to provide feedback on job completion or the necessary performance of tasks. • Must be able to respond to plant emergencies as directed outside of normal working hours. • Operation, maintenance and repair of responsible tools and equipment. • High level of integrity. Required Technical Skills: • Understand, install, troubleshoot and maintain various types of food processing equipment including but not limited to: pumps, conveyors, agitators, tanks, exchangers, valving, etc. • Advanced Journeyman level sanitary stainless steel tig welding experience. • Journeyman ability to design, fabricate and build basic and/or complex structures, supports or framework. • Ability to perform oxy fuel and plasma cutting processes. • Perform safe rigging procedures for lifting or installing various equipment. • Perform demolition of equipment/systems and the ability to properly isolate, rig and remove safely and in proper sequence. • Perform preventative maintenance on equipment for readiness and operational capacity. • Safe operation of forklift and other mobile equipment. • Modernization and continual improvement of responsible duties. Required experience: • Minimum 5 years related work experience as a journeyman tig welder/millwright. • Adherence to all customer GMP requirements. • Ability to follow all safety rules and regulations. • Advanced journeyman ability in sanitary TIG welding. • Trade tickets or certifications not necessary, journeyman level personal and technical experience is a must. .

Copy Link

Recommended publications

Welding, Cutting and Brazing Safety Guidelines
Welding, Cutting and Brazing Safety Guidelines April 2020 Welding, Cutting and Brazing Safety Guidelines Table of Contents I. Purpose II. Responsibilities III. Hazard Identification & Prevention IV. Protection of Personnel V. Health Protection/ Ventilation Requirements VI. Operational Safety VII. Training & Record Keeping Appendix A Filter Shade Selection Guide by Welding Type Welding, Cutting and Brazing Safety Guidelines I. Purpose The purpose of the University of Northern Colorado’s Welding, Cutting and Brazing (WC&B) program is to protect faculty, staff, students and visitors from hazards associated with activities that requires the use of equipment involving open flames, sparks and heat that pose fire and other health hazards. This program establishes minimum requirements for performing work during such activities in a safe and cautious manner. II. Responsibilities The appropriate department shall be responsible for following in accordance with this guideline. A. Environment, Health & Safety (EHS) Department shall: • Review and approve, in coordination with the AVP Facilities Management the designated areas approved for welding and cutting activities. • Maintain a list of designated areas. • Inspect designated areas to be sure that conditions have not become unsafe for welding and/or cutting annually. • Provide training for fire watches. • Suspend welding and cutting work if conditions become unsafe for the work being performed. • Investigate any incidents that may occur during operations. B. Supervisors shall: • Ensure employees who will be performing such operations are properly trained on this procedure before performing work on campus. • Ensure the safe operation of equipment, incorporating information from Material Safety Data Sheets (MSDS) on welding materials used, appropriate Personal Protective Equipment (PPE), evaluation of combustible materials and hazardous areas present or likely to be present in the work location.
[Show full text]
Welder Type: Full Time, Monday-Thursday 7:00A - 4:30P, Friday 7:00A – 11:00A Department: Metal Fabrication Reports To: Metal Fabrication Department Manager
Job Title: Welder Type: Full Time, Monday-Thursday 7:00a - 4:30p, Friday 7:00a – 11:00a Department: Metal Fabrication Reports To: Metal Fabrication Department Manager ABOUT SHUR-CO®: Shur-Co®, LLC, is headquartered in Yankton, South Dakota, and is a leading provider of covering systems, parts and service to the global transportation market. With over 60 years of industry experience, Shur-Co® now manufactures a wide offering of tarp systems and accessories for trucks, trailers, carts and specialty equipment used in the agriculture, construction, waste and flatbed markets. Shur-Co® operates 12 production sites and sales locations in the United States, Canada and the United Kingdom, giving you the opportunity to work with employees and customers all over the world. We are always looking for well-qualified candidates to fill a variety of open positions. Check out all of our opportunities at www.Shur-Co.com/employment. SUMMARY: Lay out, fit, and weld fabricated steel and aluminum components, by performing the following duties. Must be able to efficiently weld small and large gauge metal with high quality. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Select equipment and plan layout, assembly and welding. • Require minimal guidance from Lead in welding area. • Direct setup personnel in layout, and align the fitting of components together. • Set up equipment and weld parts using arc, gas-shielded arc, or gas welding equipment. • Responsible for welding tasks as assigned by Lead and/or Department Manager. • Responsible for the equipment care and proper machine settings to optimize the welding equipment. • Report to the Area Lead any nonconformance of components and/or machine function characteristics.
[Show full text]
Application-Carpenter-Millwright-Floor Layer-Lather-Piledriver- Cabinetmaker Apprenticeship Program
APPLICATION FOR APPRENTICESHIP PROGRAM YOU MUST BE 17 YEARS OF AGE TO BE IN THIS PROGRAM LOG #(S):______________________________________________ UBC ID:__________________________ I hereby make application for the __________________________________________________Apprenticeship Program. (List all trades interested in) NAME ____________________________________________________ DATE OF BIRTH Last First Middle Initial ADDRESS CITY STATE ZIP HOME PHONE CELL PHONE EMAIL _____________________________________________ GENDER ______ ETHNICITY __________________ 1. Are you at least 17 years of age? Yes No 2. Do you have a high school Diploma or GED? Yes No Date:__________________________ If no, what is the highest level of education completed? ______________________________________ 3. Are you aware that it may be necessary to comply with City, County, State or Federal requirements for work permits, health and safety permits, licenses or citizenship as required by law? Yes No 4. Are you a U.S. Military veteran? Yes No Branch ____________ Yr. Discharged ______Yrs. Service____ If yes, are you registered with helmets to hardhats? Yes No 5. Did you learn about the trades from a source other than a friend or family member? Yes No If yes, how did you learn about apprenticeship? _____________________________________________________ 6. Mark the appropriate box indicating the total number of months of work experience in any of the trades below. Can you provide documentation for all previous construction related work history? Yes No a. None b. 1-6 Months c. 7-12 Months d. 13-18 Months e. 19-24 Months f. 25-30 Months Concrete Forms Finish Carpentry Residential Frame Metal Frame Millwright Insulation Cabinet Maker Floor Layer Pile Driver Mechanic Acoustical Ceiling Drywall Drywall Finishing Plastering Machinist 7.
[Show full text]
Welding on the Farm: Selecting a Welding Unit for the Farm Or Ranch
Welding on the Farm: Selecting a Welding Unit for the Farm or Ranch Farms encounter a wide variety of welding repairs and projects – having the right welder depends on a lot of factors. Do you have to bring the welder to the work or can you take the work to the welder? Which process (MIG, Stick, or TIG) fits your needs? This article examines all these issues and more. The weather finally cleared, and Wisconsin dairy farmer Al Hoffmann has 385 acres of haylage to cut and store when the chopper blower band for the silo snaps in half. Part of the 3/16 in. steel band has worn paper thin and snapped, and on this Saturday, the nearest replacement band is two days away. Using a 200 amp Millermatic® wire welder, Al saves the band by tack welding it together and then welding on a back-up strip of steel. The repaired chopper blower moves more than 800 tons of haylage in the next few days... ...It's evening milking time. Al is half done with his 185 cows when a hinge breaks on the air gate in the milking parlor. Al resumes milking a few minutes later, after he repairs the gate with a portable Millermatic wire welder that runs off his 115 V household current. "This farm has a lot of old iron, but welders keep my machinery running," Al says. In addition to the two wire welders, Al also uses a 175 amp Stick (shielded metal arc) welder, primarily for hardfacing the bucket on his skid loader or repairing his manure spreader.
[Show full text]
ASC-GIEC List of Degrees and Careers
ASC-GIEC List of Degrees and Careers College Degree Original Career list APS PVNGS SRP (Career Levels) TEP AAS Electric Electric Utility Lineworker Design Technician TEP – T&D Design Utility Design Design Electrician Lineworker Technology Technician Polyphase Cable Splicer Chandler- Cable splicers Meterman Gilbert Designer Community AAS Electric Lineworker Lineworker Lineworker TEP T&D College Utility Electrician Substations Relay Tech. Technology Substation Electrician Lineman Technician (Lineworker) Relay Technician Troubleman Metering Tech. Meter Technician Polyphase Distribution Meterman Cable Splicer Designer Automobile Automobile Heavy Equip. Ops Mechanic Mechanic Elect./Comm. Metal Fabricator Electrician Machinist Electric Repair Plant Electrician and Test Shop Plant Mechanic Electrician Construction and Automotive Maintenance Mechanic Repairer Design Technician CCL Electric Lineworker Lineworker Lineworker TEP T&D – Lineman Utility Electrician Substations (Lineworker) Technology Polyphase Electrician Relay Technician Meterman Meter Technician Cable Splicer 1 ASC-GIEC List of Degrees and Careers Automobile Mechanic Metal Fabricator Machinist Plant Electrician Plant Mechanic Construction and Maintenance Repairer AAS Engineering Engineering Engineering Technician Technician Technology I & C Relay Technician Technician Communications E&I Technician Technician Boilermaker Control Technician Millwright Electrical Repairman Pipefitter OR Pathway to Eng. Bachelor’s; Elect,
[Show full text]
Terry O'neil Mine Inspector St. Louis County 307 South First Street Virginia, MN 55792 218-7 42-9841 Joseph Austin Safety &
This document is made available electronically by the Minnesota Legislative Reference Library as part of an ongoing digital archiving project. http://www.leg.state.mn.us/lrl/lrl.asp the Terry O'Neil Joseph Austin Mine Inspector Safety & Risk Mgmt.' Director St. Louis County St. Louis County 307 South First Street 2503 Rice 'Lak~ Road Virginia, MN 55792 Duluth, MN 55811 218-7 42-9841 218-726-2139 The ANNUAL REPORT of the INSPECTOR OF MINES St. Louis County, Minnesota ******************** 2013 ******************** INSPECTOR OF MINES SAFETY & RISK MANAGEMENT DIRECTOR Terry O'Neil Joseph J. Austin 616 S. Main Street, Box 294 5888 Sunny Lane Biwabik, Minnesota 55708 Caribou Lake, MN 55811 HOME PHONE: 218-865-6978 OFFICE PHONE: 218-742-9841 OFFICE PHONE: 218-726-2139 CEll PHONE: 218-780-1306 CELL PHONE: 218-348-0355 E-MAIL: oneilt@ stlouiscountymn.gov E-MAIL: [email protected] FAX: 218-471-7270 FAX: 218-722-8860 ASSISTANT MINE INSPECTOR ASSISTANT MINE INSPECTOR Paul Wier Steve Manninen 2311 Station 44 Road 4502 Cedar Island Drive Eveleth, Minnesota 55734 Eveleth, Minnesota 55734 HOME PHONE: 218-744-2806 HOME PHONE: 218-744-2817 OFFICE PHONE: 218-742-9843 OFFICE PHONE: 218-742-9840 OFFICE AT NORTHLAND OFFICE BUILDING 307 South First Street, Virginia, Minnesota 55792 PHONE: 218-742-9841 ****************** THE ST. LOUIS COUNTY BOARD OF COMMISSIONERS District 1 .............................................................. Frank Jewel, Duluth, Minnesota District 2 ............................................................ Steven O'Neil, Duluth, Minnesota Angie Miller, Duluth, Minnesota District 3 .......................................................... Chris Dahlberg, Duluth, MiP.nesota District 4 ................................................................ Mike Forsman, Ely, Minnesota District 5 ................................................... Pete Stauber, Hermantown, Minnesota District 6 ............................................................ Keith Nelson, Virginia, Minnesota District 7 .....................................................
[Show full text]
Welder / Mechanic Job Code: 2340 Department: General Services Date: 2/08 Reports To: Shop Supervisor
Welder/Mechanic Page 1 of 2 CITY OF CONCORD CLASS SPECIFICATION CLASS TITLE: WELDER / MECHANIC JOB CODE: 2340 DEPARTMENT: GENERAL SERVICES DATE: 2/08 REPORTS TO: SHOP SUPERVISOR JOB SUMMARY: Performs skilled acetylene and electric arc welding work in the fabrication, repair, and reinforcement of metal parts and equipment. Also performs extensive heavy-duty mechanical repairs. ESSENTIAL JOB FUNCTIONS: Performs cutting and welding operations on machinery and equipment; repairs parts for machinery and equipment. Determines appropriate welding techniques and equipment to use; works from sketches, blueprints, and instructions given both orally and in writing. Performs designing, layout and fabrication of various metal items used by the city. Performs on location welding operations on city structures and equipment. Operates air arc machine to cut heavy material. Fabricates metal articles such as brackets, pipe hangers, braces, sanders, rakes, teeth, and plow blades. Maintains and makes repairs on welding equipment; sharpens and tempers tools. Mounts bodies on new cabs and chassis. Welds and repairs tractor trucks and trailers. Performs general repair and maintenance of city vehicles. Performs inspections of city vehicles. Responds to call for roadside assistance. Operates hydraulic hose equipment. Diagnoses and repairs hydraulic and electrical equipment. Performs other related duties as assigned. MATERIAL AND EQUIPMENT USED: Wirer Feed-Mik Welder Cutting Torches Placemat Cutter Mechanical Hand Tools Gas Welder Arc Welder MINIMUM QUALIFICATIONS REQUIRED: Education and Experience: High School diploma or GED; and, additional training in welding apprenticeship; and, four years of experience as journeyman welder; or, any combination of education, training and experience, which provides the knowledge, skills, and abilities required for the job.
[Show full text]
Continuing Education
Summer 2018 Schedule CONTINUING EDUCATION New Construction Trade Classes www.com.edu/ce/harveyconstructiontrades MECHANICAL MAINTENANCE TECH STUDENT LEARNS FROM THE BEST Melvin Robertson is just one of three mechanical maintenance technician students who received an apprenticeship with INEOS Olefins & Polymers in 2017. Robertson, now at INEOS Chocolate Bayou, was introduced to COM’s mechanical maintenance technician program by a coworker at Zachary who was also a previous student of the COM program. Although Robertson was already in the field, he knew the importance of having training and a certificate. “Employment opportunities increase at a company like INEOS by having that certificate,” he said. “A certificate and the hands-on experience you get in the field prepares you for a job.” Once he started the program, Melvin realized he was going to gain valuable knowledge from COM’s instructors. “I hadn’t taken math since high school, but I learned so much from Mr. Himel,” he said. “Mr. Himel started with the basic addition and brought us all the way to trigonometry. “The instructors have your best interest at heart and want you to learn so you can be successful.” Instructors bring years of field experience to the classroom. “Mr. Lloyd Lindsey knew everything about rotating equipment, and his knowledge showed in his teachings. He made sure we knew it, too,” Melvin added. The need for qualified industrial craft instructors is increasing due to the demand for more skilled workers in the field of mechanical maintenance technician, machinist, electrical, HVAC, instrumentation, pipefitting and welding. College of the Mainland hires instructors with experience in the field and have a desire to train the next generation of craft professionals.
[Show full text]
Physical Demands Analysis Welder Prepared
Physical Demands Analysis 154 Meadowlark Health Centre 156 Street & 87 Avenue Welder Edmonton, Alberta T5R 5W9 Tel (780) 429-4761 Fax (780) 425-4274 Prepared for: Toll Free 1-800-493-5446 Alberta Construction Association Job Title: Welder Assessment Edmonton, AB Data Collection August 18, 2020 Location: Date: Completed By: Erika Job BSc.OT Submitted on: November 11, 2020 Disclaimer: The Physical Demands noted in this report may vary depending on company and location. Please contact the company directly to confirm this physical demands analysis is an accurate representation of the specific job title for the specific location. Work Shift Duration: 5 days/week, 8 hours/day; may vary depending on volume Schedule: Break Schedule: Total of 1 hour break per day / 2-15 minute coffee breaks, 1-30 minute lunch break Shift Rotation: Not applicable On call is required: No Overtime required: No; but available (longer days/Saturday) Education / Education required: A Journeyman Welder participates in a 3 year program including 8 weeks of Experience: in school training and 1500 hours of on the job training per year. Hours required for position: A minimum of 4500 hours of on the job training is requires to be a Journeyman Welder. Tickets that may be required (not limited to): Basic Safety Orientation provided on site. Other onsite training including WHIMIS, machinery use. Labour N/A Provider: Job The Journeyman Welder is responsible for performing welding which includes repairs on various Overview: The heavy equipment such as loaders, excavators, crushers, trailers, dump trucks, dump roll of bins etc. They are also responsible for fabricating and welding components such as supports and structures throughout the shop and for various equipment.
[Show full text]
Apprenticeship Curriculum Standard Industrial Mechanic (Millwright)
Apprenticeship Curriculum Standard Industrial Mechanic (Millwright) Trade Code: 433 A Construction Millwright Trade Code: 426A Level 1 Common Core Date: 2005 Please Note: Apprenticeship Training and Curriculum Standards were developed by the Ministry of Training, Colleges and Universities (MTCU). As of April 8th, 2013, the Ontario College of Trades (College) has become responsible for the development and maintenance of these standards. The College is carrying over existing standards without any changes. However, because the Apprenticeship Training and Curriculum Standards documents were developed under either the Trades Qualification and Apprenticeship Act (TQAA) or the Apprenticeship and Certification Act, 1998 (ACA), the definitions contained in these documents may no longer be accurate and may not be reflective of the Ontario College of Trades and Apprenticeship Act, 2009 (OCTAA) as the new trades legislation in the province. The College will update these definitions in the future. Meanwhile, please refer to the College’s website (http://www.collegeoftrades.ca) for the most accurate and up-to-date information about the College. For information on OCTAA and its regulations, please visit: http://www.collegeoftrades.ca/about/legislation-and-regulations Ontario College of Trades © Level 1 - Industrial Mechanic (Millwright)/Construction Millwright TABLE OF CONTENTS Introduction...................................................................................................... 1 Summary of Total Program In-School Training Hours ................................
[Show full text]
Industrial Mechanic Millwright Manufacturing and Engineering Technology
Technical Description Industrial Mechanic Millwright Manufacturing and Engineering Technology © WorldSkills International TD48 v7.0 WSC2019 WorldSkills International, by a resolution of the Competitions Committee and in accordance with the Constitution, the Standing Orders and the Competition Rules, has adopted the following minimum requirements for this skill for the WorldSkills Competition. The Technical Description consists of the following: 1 INTRODUCTION ................................................................................................................................. 2 2 THE WORLDSKILLS STANDARDS SPECIFICATION (WSSS) .............................................................. 4 3 THE ASSESSMENT STRATEGY AND SPECIFICATION ..................................................................... 11 4 THE MARKING SCHEME .................................................................................................................. 12 5 THE TEST PROJECT .......................................................................................................................... 15 6 SKILL MANAGEMENT AND COMMUNICATION ............................................................................ 18 7 SKILL-SPECIFIC SAFETY REQUIREMENTS ....................................................................................... 19 8 MATERIALS AND EQUIPMENT ....................................................................................................... 20 9 SKILL-SPECIFIC RULES ....................................................................................................................
[Show full text]
APA 6 Dissertation Template
A Hands-on Project to Promote Student Engagement and Motivation in High School Metal Shop by Alan Feustel Bachelor of Education, University of British Columbia, 2000 A Project Submitted in Partial Fulfillment of the Requirements for the Degree of MASTERS OF EDUCATION in the Department of Curriculum and Instruction © Alan Feustel, 2015 University of Victoria All rights reserved. This project may not be reproduced in whole or in part, by photocopy or other means, without the permission of the author. ii Abstract Supervisory Committee: Dr. James Nahachewsky (Department of Curriculum and Instruction) Supervisor Dr. Tim Pelton (Department of Curriculum and Instruction) Committee member Student motivation and engagement and how they can be used to create hands-on projects in the high school metalshop were examined. Project selection is critical to the success of elective courses; not only do the projects need to satisfy the learning outcomes of the course, but they must also motivate and engage students. Current literature about student motivation, engagement and mindset, as well as personal observation of students in my own classroom were used to provide a foundation for the selection and development of a hands-on project for a high school metalworking class. A 2 x 72 inch variable speed belt grinder was chosen as a project for senior metalworking students. This project was carefully designed to make it accessible for students and a set of detailed instructions known as a cookbook was created to assist in maintaining student motivation while building this challenging hands-on project. iii Dedication I would like to dedicate this project to three men who in one way or another helped shape the person I am today.
[Show full text]