Elevator Technology Escalators and moving walks Escalating performance. When you choose an escalator or moving walk you want to feel ESCALATE confident with the decision you make. You want people you can trust and service you can count on. You want products that last PERFORMANCE. and have minimal impacts on our environment. When you choose ThyssenKrupp , confidence is engineered into everything OPTIMIZE TRAFFIC. we do, from the planning and installation process to routine maintenance. It’s the reason customers trust us.

TABLE OF CONTENTS

Escalators...... 4 Moving Walks...... 8 imod...... 12 Planning Guide...... 14

2 ESCALATORS VELINO COMMERCIAL-DUTY ESCALATOR Escalators

Rise: up to 33'0" (10 m) Step Width: 24", 32", 40" (600 mm, 800 mm, 1000 mm) Angle of Inclination: 30°

be in Speed: 100 fpm (0.5 m/s) confident ThyssenKrupp Elevator’s Velino commercial-duty your Usage Factor: 18–20 hours/day escalator is designed to preserve the architectural Average Lifespan: 25 years integrity of almost any . But it’s more than just good looks. This machine runs efficiently, keeping NEXT STEP. Step Load: per ASME minimum daily commuters safe while using minimal energy.

Dimensional data shown here comply with the current ASME A17.1 3 and CSA B44 Safety Code for . Local codes may vary Thin stainless steel balustrades or /8" (10 mm) thick Our escalators help you move passengers through a fast- from national codes. Consult your local ThyssenKrupp Elevator representative for details. tempered safety glass panels and optional under paced world. That’s why at ThyssenKrupp Elevator, we offer handrail lighting provide striking aesthetics. Dual CPU Dimensions above based on 100 fpm. May be modified to suit APTA guidelines. controllers and optional Variable Voltage Variable The escalator shown above features glass balustrades and outer three classes of escalators, each designed to move people safely. cladding, aluminum plain-ribbed floorplates, brushed stainless-steel Frequency (VVVF) drive technology save energy and skirt decking, black steps with yellow demarcation, and lighting. See page 15 for a complete list of design options. help keep operational costs low. 4 TUGELA HEAVY-DUTY ESCALATOR VICTORIA TRANSIT-DUTY ESCALATOR Escalators

Rise: up to 65'7" (20 m) Rise: up to 164'-0" Step Width: 24", 32", 40" Step Width: 24", 32", 40" (600 mm, 800 mm, 1000 mm) (600 mm, 800 mm, 1000 mm) Angle of Inclination: 30° Angle of Inclination: 30°

Speed: 100 fpm (0.5 m/s) Speed: 100 fpm (0.5 m/s) The Victoria transit-duty escalator is a non-stop workhorse perfect for hubs including the – Usage Factor: 20 24 hours/day Our heavy-duty Tugela escalator is most appropriate Usage Factor: 24 hours/day busiest train stations and . It is the strongest, Average Lifespan: 30 years for high-rise applications and locations with heavy Average Lifespan: 35–40 years most powerful ThyssenKrupp escalator model, traffic. The reinforced balustrade is made of tempered featuring a specially reinforced drive system capable Step Load: rated for 265 lbs/step safety glass so it is resistant to bumps from bags and Step Load: rated for 320 lbs/step of maximum performance at full load capacity

Dimensional data shown here comply with the current ASME A17.1 cases. You can also customize the look with glass Dimensional data shown here comply with the current ASME A17.1 around the clock. and CSA B44 Safety Code for Elevators. Local codes may vary colors and optional under handrail lighting. and CSA B44 Safety Code for Elevators. Local codes may vary from national codes. Consult your local ThyssenKrupp Elevator from national codes. Consult your local ThyssenKrupp Elevator The Victoria features a step chain with external 4" representative for details. representative for details. It features larger motors and chains, combined with (102 mm) rollers rather than traditional 3" (76 mm) Dimensions above based on 100 fpm. reinforced handrail drives that make it an ideal escalator Dimensions above based on 100 fpm. May be modified to suit internal rollers. It was developed specifically for The escalator shown above features glass balustrades and outer APTA guidelines. cladding, aluminum black-ribbed floorplates, aluminum skirt decking, for convention centers, stadiums, smaller airports or The escalator shown above features stainless steel balustrades and transit traffic and is available with stainless steel or black steps with yellow demarcation, and lights. See page 15 for a outer cladding, checkerplate floorplates, anodized silver skirt decking, complete list of design options. any place where lots of people are on the move. and black steps. See page 15 for a complete list of design options. glass high-deck balustrades. 6 MOVING WALKS ORINOCO MOVING WALK

Rise: up to 29'-7" (up to 9 m) Nominal Pallet Width: 40", 48", 56" (1000 mm, 1400 mm, 1600 mm) All three models of our Orinoco moving walks are Length: up to 656'-2" (up to 200 m) steadfastly dependable and have design options that allow this hard-working equipment to harmonize with Angle of Inclination: any style of architecture.

0 through 6°, 10°, 12° Choose from balustrades with 40" (1016 mm) high 3 Speed: 100–125 fpm (0.5–0.65 m/s) /8" (10 mm) thick tempered safety glass or high-deck stainless steel that will keep equipment looking good Usage Factor: 18 hours/day despite constant traffic.

Average Lifespan: 25 years Walks Moving

make long stretches feelSHORTER. Help your passengers take a break or speed their pace. Hidden away on the inside of ThyssenKrupp Elevator’s moving walks is conveyor technology that keeps people safe as they move to their destination. 8 iwalk PIT OR PIT-LESS MOVING WALK

Rise: up to 23'-0" (up to 7 m) iwalk, from ThyssenKrupp Elevator, will fit anywhere. for installation are two ramps, one at each end. iwalk features technology that can monitor how The iwalk’s slim dimensions require very little This makes it possible for the iwalk to be installed many people it is carrying and adjust power usage Length: up to 328'-1" (up to 100 m) construction work, and technical features ensure low and removed quickly to deal with temporary traffic accordingly, making it a perfect fit for energy and Angle of Inclination: 1 energy consumption. In fact, it is compact enough to needs or moved from one side of a building to cost conscious customers. easily integrate into existing . another for renovation work. 0 through 6°, 12° The horizontal version of the iwalk only needs a Thanks to small and flat transitions, the risk of tripping Speed: 100–125 fpm (0.5–0.65 m/s) shallow — just over a 14" (356 mm) — pit, or can be on an iwalk is greatly reduced. Unlike traditional moving walks, these seamless transitions ease Usage Factor: 20 hours/day installed on top of an existing floor. All that is needed with luggage trolleys, strollers, or shopping carts. Average Lifespan: 25 years

Dimensional data shown here comply with the current ASME A17.1 and CSA B44 Safety Code for Elevators. Local codes may vary from national codes. Consult your local ThyssenKrupp Elevator representative for details. Moving Walks Moving

Dimensions above based on 100 fpm.

Advantages at a glance: • Easy to adapt and install for • Longer balustrades and very flexible planning wider pallets that maintain • Lightweight and modular exterior dimensions for easier transport and • Low risk of tripping due flexible installation to reduced comb • Innovative pallet belt with segment height efficient drive for smooth, • State-of-the-art design safe ride with flat entrance area and • Increased efficiency no visible fasteners through an energy • Variable speed operation recovery system also available 10 imod ESCALATOR MODERNIZATION By modernizing your escalators, you can expect a reduction in energy use. ThyssenKrupp Elevator will also work hard to utilize as much of your existing equipment as possible to reduce waste and save you money. When ThyssenKrupp Elevator modernizes escalators, we can use most existing trusses, regardless of the manufacturer. The existing truss is cleaned, repainted and prepared for the installation of the new imod component package.

During an imod modernization, the following components are replaced: • Floor plates • Lower tension • Combplate assemblies carriage systems • Handrails • Controls, piping, and • Handrail drive system electrical equipment • Balustrades, skirts, deckings • Mounting hardware • Steps, chains, axels, rollers

• Step tracks and structure imod • Motor, gear box, and brake • Main drive sprocket assembly move ahead with optimum

“The imod escalator has EFFICIENCY. improved safety features, higher reliability and will provide energy savings to Modernizing outdated building systems offers the largest single “ our company.” GINA WAGGONER, Director impact a building owner can have on reducing energy consumption Ford Land Facilities Management and costs. Modernizing your escalator system means compliance with the latest code and improved safety and reliability.

12 PRE-INSTALLATION

SAFETY DESIGN OPTIONS

SAFETY ZONE SKIRT BRUSHES OUTER CLADDING The entry and exit zone shall be kept clear of all Skirt brushes are intended to prevent passenger obstacles. The width of the zone shall be not less foot entrapment within the step/skirt running clear- than the width between the centerlines of the ance. Factory-installed skirt brushes are featured handrail plus 8" (200 mm).1 See Fig. 1. on all ThyssenKrupp’s escalators. The length of the zone, measured from the end of the newel, shall be no less than twice the distance CLEAR HEIGHT ABOVE STEPS Stainless steel Mirror Glass Powder coated between the centerlines of the handrail. Space The clearance above the step or pallet band must shall be provided to accommodate all traffic in the be at least 7'-0" (2134 mm) at every location as FLOOR PLATES safety zone. required by code.

Step Safety Zone Safety Zone LIGHTING Width Width Length In order for passengers to step safely onto 24" 3'-5" 5'-6" 600 mm 1041 mm 1676 mm escalators, the step or pallet band must be adequately lit. The ambient building lighting must 32" 4'-1" 6'-10" Aluminum Aluminum Stainless steel Aluminum 800 mm 1245 mm 2083 mm be at least 50 lx along all parts of the step band. black ribbed plain ribbed structure-etched checker plate 40" 4'-9" 8'-2" 1000 mm 1448 mm 2489 mm ThyssenKrupp Elevator offers various additional lighting options. SKIRT DECKING For example: · Above the balustrade (under handrail) · Integrated in the skirt band · At the combplates

Brushed Aluminum Powder coated Anodized silver Fig. 1: Infill panels stainless steel Pre-Installation B ESCALATOR STEP OPTIONS MOVING WALK PALLET OPTIONS A

C

A x B x + 8" (200 mm) Powder coated Powder coated Powder coated Powder coated C 2x silver with yellow black grooves silver with yellow black grooves demarcation with yellow demarcation1 with yellow demarcation demarcation1

1 These dimensions are absolute minimums. According to Fig. 1, an infill panel must be installed. 1 Yellow demarcation optional. 14 PRE-INSTALLATION

OVERVIEW DIMENSIONS & DATA

TRAVEL SPEEDS AND used in shopping centers and retail applications ESCALATOR THEORETICAL TRANSPORT CAPACITIES AND DIMENSIONS TRANSPORT CAPACITIES are permitted a maximum angle of 12°. For Nominal Step Width Truss Pit Persons extended travel distances, e.g., trade fairs and 2 Escalators and moving walks can continuously B Width Width per Hour airports, horizontal moving walks which enable the move passengers. Consequently, their transport 1 use of wider pallets are the most efficient option. 24" 3'-8 /4" 3'-10" 4,500 capacity is much greater than that of elevators. 600 mm 1124 mm 1168 mm 3 3 32" 4'-4 /8" 4'-6 /4" 6,750 Travel speed of escalators is limited by code to STEP AND PALLET WIDTHS 800 mm 1330 mm 1391 mm 1 5 100 fpm (0.5 m/s). For moving walks with 0–8° 40" 5'-0 /4" 5'-2 /8" 9,000 1 1000 mm 1530 mm 1591 mm A clearance of 1 /4" (30 mm) for installation must inclination, the speed can be increased up to 180 be added to the overall width on either side of an fpm (0.9 m/s). escalator or moving walk. The standard escalator step width for the North American market is 40" MOVING WALK THEORETICAL TRANSPORT CAPACITIES AND DIMENSIONS TRAVEL HEIGHTS AND INCLINES (1000 mm). See Fig. 3. Nominal Truss Pit Persons per Hour Persons per Hour Escalators With a rise of only 6'-0" (1829 mm), Pallet Width Width Width 100 fpm (0.5 m/s) 125 fpm (0.65 m/s) an escalator can considerably improve access to 1 3 OUTDOOR APPLICATIONS 32" 4'-4 /4" 4'-6 /4" 6,750 8,775 a building. ThyssenKrupp Elevator has designed 800 mm 1337 mm 1391 mm

ThyssenKrupp Elevator outdoor application 1 5 40" 5'-0 /4" 5'-2 /8" escalators to reach a rise of 164'-0" (50 m). 9,000 or 900 11,700 escalators include as a minimum: galvanized 1000 mm 1530 mm 1591 mm Code limits the inclination angle to 30° in the US 1 5 48" 5'-8 /4" 5'-10 /8" truss structure, protective chain covers, automatic 11,250 or 900 14,625 and Canada. See Figs. 2A and 2B. 1200 mm 1734 mm 1794 mm

lubrication, handrails with nylon sliders, stainless 1 5 56" 6'-4 /4" 6'-6 /8" 13,500 or 900 17,550 Moving Walks Inclined moving walks typically steel handrail guides, oil/water separator in lower 1400 mm 1937 mm 1997 mm 1 5 64" 7'-0 /4" 7'-2 /8" pit floor, and stainless steel fasteners for all 15,750 or 900 20,475 Fig. 2A: Two flat step configuration. 1600 mm 2140 mm 2200 mm exposed surfaces.

Fig. 3: Truss and step widths. A A ESCALATOR PARTS

C Outer Cladding F Handrail B D Skirt Decking G Floor Plate E Balustrade H Skirt Brushes Pre-Installation

E

Fig. 2B: Three flat step configuration. D

H E F E F D C D C G

1 Dimensional data shown here comply with the current ASME A17.1 and CSA B44 Safety Code for Elevators. Local codes may vary from national codes. Consult A Nominal Truss Width your local ThyssenKrupp Elevator representative for details. 2 Based on 100 fpm. B Step Width 3 A maximum inclination of 12° is permitted for moving walks. If the pallet width exceeds 40" (1000 mm), a maximum inclination of 4° is permitted by code. 16 PRE-INSTALLATION

PREPARATIONS BY OTHERS

· Whenever possible, schedule escalator delivery · Check that the floor of the building will bear the · When designing support recesses take into · Intermediate supports are needed on to take place prior to the installation of floor slabs, transport weight of your escalator. Otherwise, account the support loads. They are shown escalators with a considerable travel height ceilings, roofs, or any overhead obstructions. additional floor under-pinning support will be on the installation drawing, i.e. at those and on long moving walks. You will be · Normally, completely assembled escalators required during the installation period. locations where the supports of your escalator informed if an intermediate support is required and/or moving walks are moved in by crane · In order to have your system delivered and (or your moving walk) will be placed, the and ThyssenKrupp Elevator will assist with through a suitable overhead opening. See assembled in a timely manner, please take note supports must be able to bear the weight of determining the proper location. See Fig. 6. 2 Fig. 4A. In most cases, this allows the of the following during your planning: the escalator including 105 lbs/ft traffic load. Typically, an intermediate support is required: When preparing the supporting structures, the · 2 flat steps design: H>26'-6" (8077 mm) equipment to be assembled off site, removing 1. In cases where it is not possible to bring a dimensions and reactions indicated on our disruptions to other subcontractors. Another complete escalator and/or moving walk into · 3 flat steps design: H>24'-10" (7569 mm) installation plans must be precisely adhered option is to bring the escalator and/or moving the building, the balustrade is dismantled to. See Fig. 5. walk in through a suitable opening at the before delivery. See Fig. 4B. ground floor. It is important that the route to 2. The length of some escalators and/or moving the assembly location within the building is walks require that they are manufactured with free of obstacles and level, and the ceiling can a split and installed in sections. support the hoist load. Otherwise, appropriate shoring must be provided. · You will be notified of the location and size of required ceiling/roof openings. Please ensure the Fig. 5: Top and bottom supports.

required opening dimensions are made available. 8" (200 mm)

Fig. 4A: Completely assembled escalator.

51/2" (140 mm)

A B C

Hardwood block and steel shim-stock by ThyssenKrupp L

Fig. 6: Intermediate supports. Pre-Installation Fig. 4B: Split escalator.

23/8" (60 mm)

B A B A H by ThyssenKrupp Elevator

A Transport height with balustrade by others B Transport height with balustrade removed C Transport height with upper balustrade removed L Transport length H Floor-to-Floor Height 18 PRE-INSTALLATION

PREPARATIONS BY OTHERS

· You will be responsible for fitting pick- Weight of the cladding is not to exceed 10 lb/ft2 The power supply cable must be installed · A type-proofed oil/water separator is essential for up points for hoisting and supporting the (48.82 kgf/m2). in this separate control room. In case escalators and moving walks which are designed escalator during assembly. Speak to your local · Our diagram shows where escalators and of additional soffit lighting, a separate for outdoor exposure. ThyssenKrupp supplies ThyssenKrupp Elevator representative for size moving walks are connected to the power power supply must be provided. The an oil/water separator in the lower well for all and location. These should be located exactly supply. Power supply is always located at the power connection must be provided by an outdoor-exposure products. At the construction above the center of the supporting points. For upper well. Please note that electrical cables authorized electrician assigned by the owner’s site, a recess and drain must be provided for the systems with several supporting structures are inserted at a distance of 1’-6” (450 mm) representative. If escalator truss or comb plate oil separator in the pit. See Fig. 8. please plan for additional pick-up points above on the side of the support and that the length heaters are provided, a separate 220 VAC · In the threshold areas of the escalators, a railing the intermediate supports. All pick-up points of the cable on the inside of the escalator must power supply is required. must be installed by others. The distance to the must be capable of taking a load strain of be about 5’-0” (1500 mm). With complex · An optional safety feature is the installation of escalator handrail must be at least 4” (101 mm). 11,240 lb (50 kN). See Figs. 7A and 7B. controls, such as those required in transit a sprinkler piping within the escalator or · The exterior cladding of the truss (unless installations, the escalator control equipment moving walk. otherwise specified) is prepared by others. may be installed in a separate room.

Fig. 8: Intermediate supports.

Fig. 7A: Pick-up points with wooden beam. Fig. 7B: Pick-up points with threaded rods.

stable concrete steel tube stable concrete steel plates Pre-Installation 2 drill holes in 2 drill holes in the concrete the concrete wooden beam wooden beam

3'-91/4" (1149 mm) 4'-71/4" (1400 mm)

1'-115/8" (1149 mm) 20 PRE-INSTALLATION

WORK BY OTHERS

ESCALATORS · Electrical service to upper well including three- MOVING WALKS · Electrical service to upper well including three- phase main power supply and lockable, fused phase main power supply and lockable, fused · Provision of proper building dimensions and · Provision of proper building dimensions and disconnects to each controller. Provide single disconnects to each controller. Provide single suitable floor openings, properly framed with suitable floor openings, properly framed with phase 120 VAC electrical service and lockable, phase 120 VAC electrical service and lockable, suitable reactions and finished in accordance suitable reactions and finished in accordance fused disconnect for light and convenience fused disconnect for light and convenience with escalator shop drawings. Variations not to with moving walk shop drawings. Variations not outlet in the upper well and all other electrical outlet in the upper well and all other electrical exceed +1'-0" at any point. to exceed +1'-0" at any point. devices that are not a part of the escalator devices that are not a part of the moving walk · Supporting structure for the escalators and proper but may be required by local authorities. · Supporting structure for the moving walks and proper that may be required by local authorities. enclosure walls, external railing, guards, closures, enclosure walls, external railing, guards, closures, Separate 220V AC to be supplied with lockable, · Provision of wiring and conduit from the closest shutters and smoke barriers as required. shutters and smoke barriers as required. fused disconnect for truss and/or comb plate wellway of each moving walk group or single · Waterproof lower well space and provide lower heating when required. · Waterproof lower well space and provide lower moving walk to the firefighter’s control room pit drainage (as required). · Provision of wiring and conduit from the pit drainage (as required). and/or console as required. Coordinate with · Fire-rated exterior cladding of truss and finish closest wellway of each escalator group or · Fire-rated exterior cladding of truss and finish moving walk contractor for size, number and from the edges of escalator deck covers, single escalator to the firefighter’s control from the edges of moving walk deck covers, location of conduit. including ends, sides and bottom of truss in room and/or console as required. Coordinate including ends, sides and bottom of truss in · Other work required for installation of the accordance with applicable and standard weight with escalator contractor for size, number and accordance with applicable and standard weight moving walk(s) including, but not limited restrictions (max. 10 lbs per square foot). location of conduit. restrictions (max. 10 lbs per square foot). to, required changes to sprinklers, lighting, · Access panels or doors to interior of escalator if · Other work required for installation of the · Access panels or doors to interior of moving electrical, air conditioning and heating systems. required by unusual layout conditions. escalator(s) including, but not limited to, walk if required by unusual layout conditions. Provide barriers for open wellways during · Provision of flexible in-fill and finished required changes to sprinklers, lighting, · Provision of flexible in-fill and finished flooring construction per OSHA regulations. flooring adjacent to floor plates and escalator electrical, air conditioning and heating systems. adjacent to floor plates and moving walk · Protect moving walk truss, steps, landing after installation. Provide barriers for open wellways during after installation. plates, balustrades, handrail, and special metal construction per OSHA regulations. · Cutting of floors, walls, ceilings, or partitions · Cutting of floors, walls, ceilings or partitions finishes from damage during construction. together with any repairs made necessary by · Protect escalator truss, steps, landing plates, together with any repairs made necessary by · All engineering costs to determine and identify such cutting. balustrades, handrail, and special metal such cutting. structural load capacities and restrictions will be finishes from damage during construction. · Painting and finish work required beyond that · Painting and finish work required beyond that by others. included in this section. included in this section. Pre-Installation

22

Winnipeg » Victoria Vancouver Kelowna » Edmonton Calgary Macon » » New Haven » Collins Fort Eagle Denver Colorado Springs » . Barbara Santa San Jose ...... Diego San Sacramento Los Angeles Hayward Fresno Anaheim » Little Rock » son Tuc Phoenix » Anchorage » Birmingham » Savannah Marietta ...... Beach Vero Tampa Tallahassee Sarasota/Bradenton West Palm Beach Area Pensacola/Mobile Orlando Miami Jacksonville Gainesville Ft. Myers Ft Lauderdale » Elevator Locations 2600 Network Blvd.,Ste.450 All illustrations are andspecifications approval. basedoninformation attimeof publication ineffect thyssenkrupp Elevator reserves the right to change specifications or design and to discontinue items without orobligation.Copyright©2015thyssenkruppprior notice Elevator Corporation. #651371 License CA Phone (877)230-0303 Frisco, TX75034 thyssenkruppelevator.com thyssenkrupp Elevator Canada offices Canada offices United States offices United States offices Manitoba Columbia British Georgia Florida Connecticut Colorado California Arkansas Arizona Alaska Alabama Alberta ......

...... 250 763-2804 403 259-4183 376-8700 916 323 278-9888 257-0216 602 945 205 204 697-0700 250 474-1150 604 294-2209 780 488-0976 770 916-0555 328-5955 970 303 790-8566 719 548-0211 967-0131 805 392-0910 408 415 544-8150 596-7220 619 510 476-1900 271-1238 559 622-2452 520 860 828-6672 221-1744 970 714 939-0888 407-9030 501 907 522-3002 770 916-0555 475-5438 478 912 354-8800 813 287-1744 376-2241 352 772 567-0001 576-0161 850 941 753-4787 842-5761 561 477-0015 850 407 425-3496 305 592-7722 260-4656 904 334-2511 239 971-6500 954 -0062

Halifax » St. John's » Moncton Saint John » ...... Louis St. Springfield » Jackson » Minneapolis Duluth » Detroit Grand Rapids » Boston » Ocean City Hagerstown College Park Baltimore » Brewer » New Orleans Baton Rouge » Louisville Lexington » Wichita City Kansas » Indianapolis Evansville » Peoria Chicago » Boise Idaho Honolulu » Nova Scotia Nova Newfoundland New Brunswick Missouri Mississippi Minnesota Michigan Massachusetts Maryland Maine Louisiana Kentucky Kansas Indiana Illinois Hawaii ...... 301 739-1314 301 902 454-2456 709 739-4038 506 855-3357 506 634-1063 314 991-0800 417 581-9466 601 922-9400 588-7844 612 624-5566 218 734 953-3734 616 942-4710 617 547-9000 410 520-0022 345-6400 301 207 989-3255 733-6141 504 225 928-1120 502 266-6014 859 252-0386 529-2233 316 913 888-8046 595-1125 317 812 475-9419 691-2596 309 630 652-4000 208 658-0000 808 834-6300 410 636-3280

Whitby Toronto Sudbury Scarborough YorkNorth Mississauga London Kingston Hamilton » Syracuse » Raleigh Greensboro Charlotte » Rochester Manhattan Long Island Elmsford Buffalo » Albuquerque » Cranford Atlantic City » Reno Vegas Las » Bozeman » York Pittsburgh Philadelphia ...... Prussia of King Allentown » Portland Eugene » Oklahoma City » Toledo Columbus Cleveland Cincinnati » Fargo Tulsa Ontario North Dakota North Carolina North York New New Mexico New Jersey Nevada Montana Pennsylvania Oregon Oklahoma Ohio ......

...... 905 579-0471 416 599-2002 705 673-4702 416 291-2000 613 731-0810 416 496-6000 905 602-6232 519 652-0800 613 542-2904 905 385-1785 585 359-9290 585 315 437-7541 315 775 329-0400 775 336 272-4563 336 497-9297908 406 587-3895 919 851-8557 529-1000 704 947-8800 212 491-3111 631 914 347-3450 505 856-5800 609 567-2333 702 262-6775 215 405-2340 614 895-8930 701 232-2673 681-7900 716 717 767-5600 717 367-7500 412 610 992-8180 610 366-0161 503 255-0079 683-7848 541 419 666-3304 918 665-2040 918 949-1916 405 440 717-0080 513 241-6000

Memphis Knoxville Chattanooga Seattle Everett Tacoma Spokane Puerto Rico Puerto » Tyler Temple San Antonio Midland Houston Downtown Houston ...... Worth Ft...... Paso El Dallas Downtown Dallas Central Christi Corpus Austin » » Sioux Falls » Beach Myrtle Greenville Columbia » Providence » Saskatoon Regina » Saskatchewan Repentigny Quebec City Montreal » Quebec Charleston » » Roanoke Richmond Norfolk Newington » Salt Lake City » Puerto Rico Puerto Texas Tennessee South Dakota Carolina South IslandRhode West Virginia West Virginia Washington Virginia Utah ......

......

...... 901 377-1993 865 588-8517 499-2216 423 425 702-1200 425 438-0309 253 566-1751 253 509 533-2701 509 787 708-5605 713 849-2191 713 903 533-8844 254 778-3741 210 495-8585 432 683-1488 654-7700 713 922-9590 817 595-0171 915 214 303-1389 972 785-0505 299-0033 361 447-9511 512 332-4950 605 448-2016 843 675-0096 864 803 798-3895 866 989-3555 306 242-6467 306 352-8608 563-5700 540 418 682-1214 514 631-6776 342-8115 304 804 355-9792 757 547-9025 571 642-0530 801 908-7433 450 582-8922

TKE 0190 v07.13 10M 0713 GSI Printed in the USA