Flying Cloud in the Boston Museum of Fine Arts and from W.A

Total Page:16

File Type:pdf, Size:1020Kb

Flying Cloud in the Boston Museum of Fine Arts and from W.A Line arrangement from The Boucher 1916 model of the Flying Cloud in the Boston Museum of Fine Arts and from W.A. White ’s sheet titled “Transverse Rigging Plan Showing Masts and Spars, Standing Rigging and Yard Halyards” in his 1933 plans for the Flying Cloud. Line sizes from David Steel’s 1800 The Art of Rigging 2nd edition, Peter Force’s 1826 “Tables”, George Biddlecombe’s 1848 “The Art of Rigging” and Ben Lankford’s sheet titled “Rigging Sections/Sails” from his 1979 plans for the Flying Fish from Model Shipways. From Underhill page 19: “Gaskets are lengths of line used to lash the rolled up sail on top of the year when furled. They are attached to the yards, and in furling are passed down abaft of the yard, up the far side, and so on round the yard. When not in use they are coiled and left hanging from the yard, [in front of the sail] and can be seen in many photographs of ships under sail …” main royal staysail Gaskets are mentioned in both Steel and Biddlecombe and are present on the Boucher model of the Flying Cloud in the Addison Gallery of American Art. main royal staysail gasket - 2” Gaskets are also used on square sails The line sizes I use here are conjecture since none of the references provide that information. I just used the downhaul main topgallant staysail line sizes for lack of a better guess. mizzen topgallant staysail mizen topgallant staysail gasket - 2” mizzen main topgallant staysail gasket - 2” spanker gaskets - 2.5” topsail staysail mizen topsail staysail gasket - 2” main topsail staysail flying jib main Spencer main Spenser gaskets - 2” jib spanker fore topmast staysail flying jib gasket - 2” fore topmast staysail gasket - 3” jib gasket - 2.5” main topsail staysail gasket - 2.5” FLYING CLOUD FLYING CLOUD - FORE & AFT SAILS GASKETS Scale 1/8” = 1’ 10” at 1:96 2021-06-28 © Scott Bradner - 2021.
Recommended publications
  • Armed Sloop Welcome Crew Training Manual
    HMAS WELCOME ARMED SLOOP WELCOME CREW TRAINING MANUAL Discovery Center ~ Great Lakes 13268 S. West Bayshore Drive Traverse City, Michigan 49684 231-946-2647 [email protected] (c) Maritime Heritage Alliance 2011 1 1770's WELCOME History of the 1770's British Armed Sloop, WELCOME About mid 1700’s John Askin came over from Ireland to fight for the British in the American Colonies during the French and Indian War (in Europe known as the Seven Years War). When the war ended he had an opportunity to go back to Ireland, but stayed here and set up his own business. He and a partner formed a trading company that eventually went bankrupt and Askin spent over 10 years paying off his debt. He then formed a new company called the Southwest Fur Trading Company; his territory was from Montreal on the east to Minnesota on the west including all of the Northern Great Lakes. He had three boats built: Welcome, Felicity and Archange. Welcome is believed to be the first vessel he had constructed for his fur trade. Felicity and Archange were named after his daughter and wife. The origin of Welcome’s name is not known. He had two wives, a European wife in Detroit and an Indian wife up in the Straits. His wife in Detroit knew about the Indian wife and had accepted this and in turn she also made sure that all the children of his Indian wife received schooling. Felicity married a man by the name of Brush (Brush Street in Detroit is named after him).
    [Show full text]
  • Sailing in Heavy Weather
    SAILING IN HEAVY WEATHER John Jourdane As the wind increases you need to reduce sail area the keep the boat under control Why we need smaller sails as the wind builds Think of a weather vane Keep the helm balanced Pac Cup Rules – Heavy Air Sails 1. Mainsail – must be able to reduce luff length by 10% 2. Boat shall carry at least 2 of the following 3 sails: a. A trysail with sail numbers on both sides, which can be set independently of the boom, has an area less than 17.5% of E x P, and which is capable of being attached to the mast. Sails newer than 1/1/2014 must be constructed of highly visible material. b. A storm jib with an alternate means of attachment to the headstay, if the head foil fails, and highly visible material c. A heavy-weather jib of area not greater than 13.5% of the foretriangle squared. The North Pacific High As the wind increases Go to progressively smaller jibs Reef the mainsail Put more reefs in the main Put up the storm jib or storm staysail Deep-reefed main alone Storm trysail and storm jib or storm staysail Heave to with trysail and storm jib or storm staysail Storm trysail or storm staysail alone Reefed Main and Small Jib Storm Sails Should be purpose-built for your boat Need to be made from heavy material to withstand the beating a storm can produce Storm Jib Gale Sail Gale Sail Gale Sail Storm Staysail Storm Jib Stow the storm jib in it’s own bag in an easily accessible place.
    [Show full text]
  • December 2007 Crew Journal of the Barque James Craig
    December 2007 Crew journal of the barque James Craig Full & By December 2007 Full & By The crew journal of the barque James Craig http://www.australianheritagefleet.com.au/JCraig/JCraig.html Compiled by Peter Davey [email protected] Production and photos by John Spiers All crew and others associated with the James Craig are very welcome to submit material. The opinions expressed in this journal may not necessarily be the viewpoint of the Sydney Maritime Museum, the Sydney Heritage Fleet or the crew of the James Craig or its officers. 2 December 2007 Full & By APEC parade of sail - Windeward Bound, New Endeavour, James Craig, Endeavour replica, One and All Full & By December 2007 December 2007 Full & By Full & By December 2007 December 2007 Full & By Full & By December 2007 7 Radio procedures on James Craig adio procedures being used onboard discomfort. Effective communication Rare from professional to appalling relies on message being concise and clear. - mostly on the appalling side. The radio Consider carefully what is to be said before intercoms are not mobile phones. beginning to transmit. Other operators may The ship, and the ship’s company are be waiting to use the network. judged by our appearance and our radio procedures. Remember you may have Some standard words and phases. to justify your transmission to a marine Affirm - Yes, or correct, or that is cor- court of inquiry. All radio transmissions rect. or I agree on VHF Port working frequencies are Negative - No, or this is incorrect or monitored and tape recorded by the Port Permission not granted.
    [Show full text]
  • Specialty Reaching Sail Guide BLUE PAPER: a North Sails Guide
    BLUE PAPER - Specialty Reaching Sail Guide BLUE PAPER: A North Sails Guide SPECIALTY REACHING SAIL GUIDE hauled sailing. As you ease the sheet of a conventional headsail and bear off, you lose control over the leech. This sail is shaped to tolerate the extra twist that results from easing the sheet while not being able to hold the lead down and out, due to deck limitations. The Jib Top design is designed to sail wider apparent wind angles while still allowing the trimmer control over the twist and leech profile of the sail. The sail is usually sheeted using the spinnaker sheet, which is “tweaked” to the deck using an adjustable purchase system. The Jib Top is a faster sail on a reach than a conventional low-clewed Jib or Genoa. Wind Seeker Blast Reacher This is a very light sail for drifting conditions. Used when a full A Blast Reacher is a non-overlapping sail, similar in concept to size, heavier weight sail will not pressurize or remain stable. the Jib Top. Used in heavier wind than the Jib Top, or in place Wind Seekers are commonly made in forgiving cloth to handle of a Jib Top on boats that do not carry overlapping headsails. slatting conditions and designed to sheet at or near the shroud base, to make tacking and sheeting in zephyrs easier. Genoa Staysail The Genoa Staysail is a small jib (often furling), which is set Jib Top inside the foretriangle and used for reaching in more than A Jib Top is a high-clewed overlapping headsail for beam eight knots of wind.
    [Show full text]
  • Sailing Course Materials Overview
    SAILING COURSE MATERIALS OVERVIEW INTRODUCTION The NCSC has an unusual ownership arrangement -- almost unique in the USA. You sail a boat jointly owned by all members of the club. The club thus has an interest in how you sail. We don't want you to crack up our boats. The club is also concerned about your safety. We have a good reputation as competent, safe sailors. We don't want you to spoil that record. Before we started this training course we had many incidents. Some examples: Ran aground in New Jersey. Stuck in the mud. Another grounding; broke the tiller. Two boats collided under the bridge. One demasted. Boats often stalled in foul current, and had to be towed in. Since we started the course the number of incidents has been significantly reduced. SAILING COURSE ARRANGEMENT This is only an elementary course in sailing. There is much to learn. We give you enough so that you can sail safely near New Castle. Sailing instruction is also provided during the sailing season on Saturdays and Sundays without appointment and in the week by appointment. This instruction is done by skippers who have agreed to be available at these times to instruct any unkeyed member who desires instruction. CHECK-OUT PROCEDURE When you "check-out" we give you a key to the sail house, and you are then free to sail at any time. No reservation is needed. But you must know how to sail before you get that key. We start with a written examination, open book, that you take at home.
    [Show full text]
  • Setting, Dousing and Furling Sails the Perception of Risk Is Very Important, Even Essential, to Organization the Sense of Adventure and the Success of Our Program
    Setting, Dousing and Furling Sails The perception of risk is very important, even essential, to Organization the sense of adventure and the success of our program. The When at sea the organization for setting and assurance of safety is essential dousing sails will be determined by the Captain to the survival of our program and the First Mate. With a large and well- and organization. The trained crew, the crew may be able to be broken balancing of these seemingly into two groups, one for the foremast and one conflicting needs is one of the for the mainmast. With small crews, it will most difficult and demanding become necessary for everyone to know and tasks you will have in working work all of the lines anywhere on the ship. In with this program. any event, particularly if watches are being set, it becomes imperative that everyone have a good understanding of all lines and maneuvers the ship may be asked to perform. Safety Sailing the brigantines safely is our primary goal and the Los Angeles Maritime Institute has an enviable safety record. We should stress, however, that these ships are NOT rides at Disneyland. These are large and powerful sailing vessels and you can be injured, or even killed, if proper procedures are not followed in a safe, orderly, and controlled fashion. As a crewmember you have as much responsibility for the safe running of these vessels as any member of the crew, including the ship’s officers. 1. When laying aloft, crewmembers should always climb and descend on the weather side of the shrouds and the bowsprit.
    [Show full text]
  • EDUCATION Permit Application
    Papahānaumokuākea Marine National Monument Permit Application - Education OMB Control # 0648-0548 Page 1 of 17 Papahānaumokuākea Marine National Monument EDUCATION Permit Application NOTE: This Permit Application (and associated Instructions) are to propose activities to be conducted in the Papahānaumokuākea Marine National Monument. The Co-Trustees are required to determine that issuing the requested permit is compatible with the findings of Presidential Proclamation 8031. Within this Application, provide all information that you believe will assist the Co-Trustees in determining how your proposed activities are compatible with the conservation and management of the natural, historic, and cultural resources of the Papahānaumokuākea Marine National Monument (Monument). ADDITIONAL IMPORTANT INFORMATION: • Any or all of the information within this application may be posted to the Monument website informing the public on projects proposed to occur in the Monument. • In addition to the permit application, the Applicant must either download the Monument Compliance Information Sheet from the Monument website OR request a hard copy from the Monument Permit Coordinator (contact information below). The Monument Compliance Information Sheet must be submitted to the Monument Permit Coordinator after initial application consultation. • Issuance of a Monument permit is dependent upon the completion and review of the application and Compliance Information Sheet. INCOMPLETE APPLICATIONS WILL NOT BE CONSIDERED Send Permit Applications to: NOAA/Inouye
    [Show full text]
  • Sultana's Sails
    Sultana’s Sails Each Sail Performs a Different Function When Sultana is Underway MAIN FORE TOPSAIL TOPSAIL STAY SAIL M A JIB I N M F MAIN A O S R T E M SAIL FORE A ST SAIL ultana is powered by six sails. The main sail is the vessel’s largest sail and is S attached to the main mast. The fore sail is the schooner’s second largest sail and is attached to the fore mast. These two sails provide the majority of the power when Sultana is underway. Near the bow, or front of the ship, are two smaller sails known as the stay sail and the jib. These sails provide Sultana with additional speed and give the captain greater control of the bow when the ship is turning into the wind. At the top of Sultana’s sailing rig are the main topsail and the fore topsail. These sails are most effective when the wind is directly behind the ship. They are also very useful in light wind conditions. In colonial times, Sultana’s commander used as many as fifteen sails! Adding more sails was important for increasing the ship’s speed, particularly when the schooner was chasing down colonial ships to enforce the tea taxes. Today Sultana’s maximum speed using all six of her sails is about twelve miles an hour. Rendering of Sultana by Darby Hewes Sultana’s Sails NAME: ____________________________________________ DATE: ____________ DIRECTIONS: Use information from the diagram on the previous page to label each of Sultana’s six sails. At the bottom of the page, briefly describe the function of each sail.
    [Show full text]
  • Naval Ships' Technical Manual, Chapter 583, Boats and Small Craft
    S9086-TX-STM-010/CH-583R3 REVISION THIRD NAVAL SHIPS’ TECHNICAL MANUAL CHAPTER 583 BOATS AND SMALL CRAFT THIS CHAPTER SUPERSEDES CHAPTER 583 DATED 1 DECEMBER 1992 DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE, DISTRIBUTION IS UNLIMITED. PUBLISHED BY DIRECTION OF COMMANDER, NAVAL SEA SYSTEMS COMMAND. 24 MAR 1998 TITLE-1 @@FIpgtype@@TITLE@@!FIpgtype@@ S9086-TX-STM-010/CH-583R3 Certification Sheet TITLE-2 S9086-TX-STM-010/CH-583R3 TABLE OF CONTENTS Chapter/Paragraph Page 583 BOATS AND SMALL CRAFT ............................. 583-1 SECTION 1. ADMINISTRATIVE POLICIES ............................ 583-1 583-1.1 BOATS AND SMALL CRAFT .............................. 583-1 583-1.1.1 DEFINITION OF A NAVY BOAT. ....................... 583-1 583-1.2 CORRESPONDENCE ................................... 583-1 583-1.2.1 BOAT CORRESPONDENCE. .......................... 583-1 583-1.3 STANDARD ALLOWANCE OF BOATS ........................ 583-1 583-1.3.1 CNO AND PEO CLA (PMS 325) ESTABLISHED BOAT LIST. ....... 583-1 583-1.3.2 CHANGES IN BOAT ALLOWANCE. ..................... 583-1 583-1.3.3 BOATS ASSIGNED TO FLAGS AND COMMANDS. ............ 583-1 583-1.3.4 HOW BOATS ARE OBTAINED. ........................ 583-1 583-1.3.5 EMERGENCY ISSUES. ............................. 583-2 583-1.4 TRANSFER OF BOATS ................................. 583-2 583-1.4.1 PEO CLA (PMS 325) AUTHORITY FOR TRANSFER OF BOATS. .... 583-2 583-1.4.2 TRANSFERRED WITH A FLAG. ....................... 583-2 583-1.4.3 TRANSFERS TO SPECIAL PROJECTS AND TEMPORARY LOANS. 583-2 583-1.4.3.1 Project Funded by Other Activities. ................ 583-5 583-1.4.3.2 Cost Estimates. ............................ 583-5 583-1.4.3.3 Funding Identification.
    [Show full text]
  • A Maritime Resource Survey for Washington’S Saltwater Shores
    A MAritiMe resource survey For Washington’s Saltwater Shores Washington Department of archaeology & historic preservation This Maritime Resource Survey has been financed in part with Federal funds from the National Park Service, Department of the Interior administered by the Department of Archaeology and Historic Preservation (DAHP) and the State of Washington. However, the contents and opinions do not necessarily reflect the views or policies of the Department of the Interior, DAHP, the State of Washington nor does the mention of trade names or commercial products constitute endorsement or recommendation by the Department of the Interior or DAHP. This program received Federal funds from the National Park Service. Regulations of the U.S. Department of Interior strictly prohibit unlawful discrimination in departmental Federally Assisted Programs on the basis of race, color, national origin, age, or handicap. Any person who believes he or she has been discriminated against in any program, activity, or facility operated by a recipient of Federal assistance should write to: Director, Equal Opportunity Program, U.S. Department of the Interior, National Park Service, 1849 C Street, NW, Washington, D.C. 20240. publishing Data this report commissioned by the Washington state Department of archaeology and historic preservation through funding from a preserve america grant and prepared by artifacts consulting, inc. DAHP grant no. FY11-PA-MARITIME-02 CFDa no. 15-904 cover image Data image courtesy of Washington state archives Washington state Department of archaeology and historic preservation suite 106 1063 south capitol Way olympia, Wa 98501 published June 27, 2011 A MAritiMe resource survey For Washington’s Saltwater Shores 3 contributors the authors of this report wish to extend our deep gratitude to the many indi- viduals, institutions and groups that made this report possible.
    [Show full text]
  • The Dynarig: Efficient, Safe and High-Performance Sailing System for Tomorrow’S Sailing Superyachts
    THE DYNARIG: EFFICIENT, SAFE AND HIGH-PERFORMANCE SAILING SYSTEM FOR TOMORROW’S SAILING SUPERYACHTS innovative solutions in composites to meet a complex array of design challenges UNIQUE CHALLENGES: ENGINEERED Magma Structures is a global leader in composite technology, providing world-class structural engineering expertise and flexible manufacturing resources and processes to deliver high-performance solutions for unique and challenging requirements. PAGE 2 PAGE 3 UNIQUE CHALLENGES: ENGINEERED UNIQUE CHALLENGES: ENGINEERED INTRODUCING THE DYNARIG A safe, high-performance sailing system, delivering ease of handling, reliability and efficiency, even when sailing at 18 knots. The DyanRig addresses key challenges from escalated loads and unprecedented scale, making it especially Private sailing yachts are increasing in size year by year. Crew numbers should be minimal and the crew must be The Maltese Falcon, suitable for two and three masted performance cruising Today’s sailing superyachts are approaching, and in some able to perform all sailing manoeuvres with ease and cases surpassing, the size of the major sailing vessels of at short notice. Large loads, flogging sails and moving launched in 2006, has yachts from 60m to 110m in length. the late 18th and early 19th century; huge vessels that deck lines should be avoided. The pleasure of a sailing carried rigs developed over years that distributed the sail vessel underway, powered up in a seaway, should not be proved that the DynaRig area into reasonable portions enabling them to be sailed tempered by any concerns of safety and ease of handling efficiently by relatively small crews. by the crew or guests on board. is a highly efficient, Today, many of the large yachts recently built or currently The DynaRig meets all of these requirements; its sails can reliable, practical, in build have rigs based on scaling up sailing rigs that be deployed and furled away with considerable ease, the owe their origin to dinghies and small sailing vessels.
    [Show full text]
  • Building Outrigger Sailing Canoes
    bUILDINGOUTRIGGERSAILING CANOES INTERNATIONAL MARINE / McGRAW-HILL Camden, Maine ✦ New York ✦ Chicago ✦ San Francisco ✦ Lisbon ✦ London ✦ Madrid Mexico City ✦ Milan ✦ New Delhi ✦ San Juan ✦ Seoul ✦ Singapore ✦ Sydney ✦ Toronto BUILDINGOUTRIGGERSAILING CANOES Modern Construction Methods for Three Fast, Beautiful Boats Gary Dierking Copyright © 2008 by International Marine All rights reserved. Manufactured in the United States of America. Except as permitted under the United States Copyright Act of 1976, no part of this publication may be reproduced or distributed in any form or by any means, or stored in a database or retrieval system, without the prior written permission of the publisher. 0-07-159456-6 The material in this eBook also appears in the print version of this title: 0-07-148791-3. All trademarks are trademarks of their respective owners. Rather than put a trademark symbol after every occurrence of a trademarked name, we use names in an editorial fashion only, and to the benefit of the trademark owner, with no intention of infringement of the trademark. Where such designations appear in this book, they have been printed with initial caps. McGraw-Hill eBooks are available at special quantity discounts to use as premiums and sales promotions, or for use in corporate training programs. For more information, please contact George Hoare, Special Sales, at [email protected] or (212) 904-4069. TERMS OF USE This is a copyrighted work and The McGraw-Hill Companies, Inc. (“McGraw-Hill”) and its licensors reserve all rights in and to the work. Use of this work is subject to these terms. Except as permitted under the Copyright Act of 1976 and the right to store and retrieve one copy of the work, you may not decompile, disassemble, reverse engineer, reproduce, modify, create derivative works based upon, transmit, distribute, disseminate, sell, publish or sublicense the work or any part of it without McGraw-Hill’s prior consent.
    [Show full text]