SGI® Origin® 3000 Engineered for High-Productivity Supercomputing

Features Deployable Supercomputing • Deployable supercomputing SGI Origin 3000 supercomputers are the most powerful systems on the planet, with more • SGI NUMAflex shared-memory architecture processors (up to 128), memory (up to 256GB), and application performance per rack • Customer-defined scalable performance than any other system. Using the unique SGI® NUMAflex™ memory architecture to • IRGO: Optimized HPC workflow environment combine up to 512 CPUs and 1TB of memory in a shared-memory image, SGI Origin 3000 systems enable breakthroughs that general-purpose business servers cannot address. Add a technical operating environment that is specifically engineered to optimize workflow for greater productivity, and your next breakthrough idea won’t have to take up a lot of space.

SGI NUMAflex Shared-Memory Architecture The SGI NUMAflex shared-memory architecture lets you run more complex models more frequently. Because the entire memory space is shared, large models fit into memory with no programming model restrictions. This allows system resources to be dynamically reas- signed to more complex areas, resulting in faster time to solution—and insight.

Customer-Defined Scalable Performance The SGI NUMAflex architecture is designed for the unique requirements of high- productivity computing. Every HPC application has its own criteria for real performance, so SGI Origin 3000 systems are designed with scalability in mind. With modular compo- nents for memory, compute, I/O bandwidth, and visualization tied to a high-bandwidth, low-latency interconnect, you can tailor and evolve your supercomputer to meet your unique performance requirements.

SGI® IRGO™: Optimized HPC Workflow Environment SGI Origin 3000 supercomputers have unique SGI IRGO HPC workflow optimization features that give you even more control over your high-productivity supercomputing environment. IRGO provides tools for run-time optimization, development optimization, and workflow security that allow you to fully harness the power of your supercomputing resources and protect your HPC workflow. With IRGO you can produce better code that runs faster in a secure environment, so your breakthrough ideas come sooner. Put sim- ply, the combination of IRGO and SGI NUMAflex on powerful SGI Origin 3000 supercom- puters lets you do more. SGI® Origin® 3000

SGI® Origin® 3000 Technical Specifications Model SGI® Origin® 3900

R-Brick (NUMAflex Router Interconnect Module) (8 total), HD and SD graphics-to-video output with • Data servers SGI® File Server 830 and • Metarouter Enables large shared-memory real-time colorspace conversion, digital-video SGI® File Server 850 configurations up to 512 multiplexer, hardware-in-the-loop interface (Gigabit Ethernet) processors – Pixel-accurate synchronization (Genlock) and swap SGI SAN Server™ 1000 synchronization (1Gb Fibre Channel) CX-Brick (Compute Module, up to 16P and 32GB – Interactive volume visualization •Tape and libraries StorageTek® L20, L40, L80, L700 • Processors Up to 16 R16000™ or R16000A™ – Image-Based Rendering StorageTek® 9840, 9940, LTO • Memory Up to 32GB ECC SDRAM ADIC® Scalar® 100, Scalar 1000, • Memory kits 1GB, 2GB V-Brick (InfinitePerformance™ Graphics Module) Scalar 10,000 • Memory controller 5-port crossbar per node board • 1–2 graphics pipes per brick, up to 2 channels/pipe, ADIC AIT • Memory bandwidth Maximum 12.8GB/sec aggregate up to 8 pipes/system memory bandwidth • Each pipe delivers: Dimensions and Weights • Router 8 port – 128MB graphics memory, including up to 104MB •Tall rack 74" H x 51" D x 30" W; 39U internal texture memory usable space; 1,225 lb. max. IX-Brick (Base System I/O Module with PCI-X) – 2D and 3D textures with texture lookup tables, detail • I/O rack 74" H x 51" D x 30" W; 39U internal • Ports 1-port SCSI, 1-port Gigabit texture, and pixel texture usable space; 1,225 lb. max. Ethernet, 1-port RTI, – 48-bit RGBA color, double-buffered with 24-bit • RAID/JBOD rack 75" H x 31" D x 24" W; 38U internal 1-port RTO, 2 serial ports eye-space Z buffer usable space; 1,265 lb. max. • Internal devices 1 system disk standard, optional – Flat, Gouraud, and specular shading redundant system disk, CD-ROM –Video format compiler with support for up to Environmental (Operating) •Disk interface Ultra160 SCSI 1600x1200 resolution •Temperature +5 to +35°C, altitude 5,000 MSL • I/O interface Six 64-bit/133 MHz PCI-X – Analog RGB and TMDS video on a single DVI-I port +5 to +30°C, altitude 10,000 MSL buses, 11 available slots – Quad-buffered stereo at 1280x1024 resolution • Humidity 10% to 90% noncondensing •Total I/O bandwidth 2.4GB/sec peak (dual-ported • Scalable Graphics Compositor IX-brick at 4.8GB/sec peak) – Combines 2 or 4 digital video inputs into a single Environmental (Nonoperating) • Device capacity 36GB (15K rpm) digital or analog output •Temperature -40 to +60°C – Zero latency compositing • Humidity 10% to 95% noncondensing PX-Brick (PCI-X Expansion Module) – Real-time dynamic load balancing • Altitude 40,000 MSL •Interface 64-bit/133 MHz PCI-X buses, 3.3V and universal Power Bay (Power Expansion Module) Electrical and Power 64-bit/66 MHz PCI-compatible • Power requirements 220–240 VAC external source •Voltage 180–245 VAC single phase • Number of buses 6 • Power distribution 48 VDC internally distributed to 180–254 VAC, 3 phase • Number of slots 12 (2/bus) full length all bricks (North America/Japan) •Total I/O bandwidth 2.4GB/sec peak (dual-ported 360–424 VAC, 3 phase PX-brick at 4.8GB/sec peak) PCI Adapters (International) • 1-port 1Gb Fibre Channel optical • Power/Heat Tall rack (max. per rack) X-Brick (XIO™ Expansion Module) • 1-port 1Gb Fibre Channel copper 8.85kw/30.20kBtu •Interface XIO • 1-port 2Gb Fibre Channel optical I/O rack (max. per rack) • Number of slots 4 • 2-port 2Gb Fibre Channel optical 2.14kw/7.30kBtu •Total I/O bandwidth 1.6GB/sec peak (dual-ported • 1-port ATMOC3 X-brick at 3.2GB/sec peak) • 1-port ATMOC12 Software • 1-port Gigabit Ethernet optical • System software IRIX® 6.5 Advanced Server D-Brick2 (JBOD Disk Expansion Module)* • 1-port Gigabit Ethernet copper Environment, UNIX® 95, IEEE •Interface Dual FC II (2Gb) • 2-port Ultra SCSI differential POSIX 1003.2, and 1003.1b, • Drive bays 16 hot-plug, 3.5" power • 8-port digital audio 1003.1c FIPS 151-2, UNIX System 110/220 V, redundant power • PCI serial card 4.4, 4.3 BSD extensions, MIPS® supplies standard • Universal Myrinet-2000 ABI, SVID issue 3, X11 R6, Motif® • Maximum bandwidth 800MB/sec peak when dual Window Manager 1.2, IRIS GL™, hosted XIO Adapters OpenGL®, Motif® 2.1 • Device capacity 36GB (5K rpm), 73GB (15K rpm), • 1-port FDDI dual attach • Networking TCP/IP, NFS V2/V3, RSVP, DHCP, 146GB (10K rpm) drive options • 1-port HIPPI 800 serial Bulk Data Service (BDSpro), * Additional JBOD disk expansion options available • Digital video NetVisualyzer™, SNMP • High-definition video management, SNMP MIB, G-Brick (InfiniteReality® Family Graphics Module) • 1-port GSN (half bandwidth) NIS/ONC+, OS bypass with • 1–2 graphics pipelines per G-brick, up to 8 • 1-port GSN (full bandwidth) Schedule Transfer (ST) protocol channels/pipe, up to 16 pipes/system • VME 6U • First pipe: 1, 2, or 4 Raster Managers; second pipe: • VME 9U • Server software XFS™ 64-bit journaled filesystem 1 or 2 Raster Managers • 4-port ATMOC3 with guaranteed rate I/O, Clustered • Each pipe delivers: • 4-port Fast-Ethernet (100 Base-Tx) XFS (CXFS™), Legato – Up to 1.3G pixels/sec of full-scene 8 subsample anti- • DMediaPro™ DM3-HD and SD video I/O NetWorker®, Performance aliased pixel fill Co-Pilot™ system and network – 1GB texture memory with support for 3D textures, External Storage Options monitoring, System MIB paging, clip-mapping, detail texture, and texture • HBA interfaces 2Gb Fibre Channel, 200MB/sec software distribution (RoboInst™) lookup tables peak bandwidth • Compilers ANSI C (c99 compliant), C++, – 48-bit RGBA color, double-buffered with 24-bit Z buffer Ultra160 SCSI, 160MB/sec Fortran 77 and 90, APO –Video format compiler with support for up to HDTV peak bandwidth (Automatic Parallelization Option) resolutions Gigabit Ethernet copper and optical • Interoperability Samba™ environments for PC – Up to 8.3 million pixels/pipe • JBOD SGI® TP900 (Ultra160 SCSI) • Security Trusted IRIX™ LSPP certification, – Base display: 2-channel RGBHV output, one S-video • RAID 2Gb SGI TP9100 (2Gb Fibre IRIX 6.5 CAPP certification, output, Genlock with internal or external sync, Channel) Commercial Security Pack (CSP) hardware swap synchronization SGI® TP9400 (2Gb Fibre Channel) • Partitioning Support for system partitioning for – Display options: 6 additional RGBHV output channels SGI® TP9500 (2Gb Fibre Channel) up to 512p

Corporate Office North America 1600 Amphitheatre Pkwy. Latin America (52)5267.1300 Mountain View,CA 94043 Europe (44)118.925.75.00 (650) 960-1980 Japan (81)3.5488.1811 www.sgi.com Asia Pacific (52)5267.1300

©2003 Silicon Graphics, Inc. All rights reserved. Specifications subject to change without notice. Silicon Graphics, SGI, Origin, InfiniteReality, IRIX, IRIS, OpenGL, and the SGI logo are registered trade- marks and IRGO, NUMAflex, XIO, InfinitePerformance, DMediaPro, SGI SAN Server, XFS, CXFS, IRIS GL, Trusted IRIX, RoboInst, NetVisualyzer, and Performance Co-Pilot are trademarks of Silicon Graphics, Inc., in the U.S. and/or other countries worldwide. MIPS is a registered trademark and R14000A is a trademark of MIPS Technologies, Inc., used under license by Silicon Graphics, Inc. Motif and UNIX are registered trademarks of The Open Group in the U.S. and other countries. All other trademarks mentioned herein are the property of their respective owners. 3399 [10.08.2003] J14140