SEPT 14TH - 24TH, 2021 CUTTING EDGE DEALS

BI-METAL RECIPROCATING SAW BLADE PACKS VARI-BIT® STEP DRILL BITS Reinforced tooth design delivers longer blade life & enables faster cutting. Patented two flute design cuts fast, clean, Sold in 5 blade or 50 blade packs. round holes. 02230881 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 02220562 | 02222761 610R 6” x 3/4” x .035”, 10 TPI, wood/metal/plastic 13/32”, 7/16”, 15/32”, 1/2” 02220564 | 02222756 614R 6” x 3/4” x .035”, 14 TPI, med.-thick metals 02230888 7/8”, 11/8” (for 1/2 & 3/4 conduit) 02220566 | 02222751 618R 6” x 3/4” x .035”, 18 TPI, all metal 02230887 7/8” (for 1/2 conduit) 02220568 | 02222757 624R 6” x 3/4” x .035”, 24 TPI, thin metal 02230912 7/8”, 11/8”, 17/32”, 11/4”, 13/8” 02220572 | 02222750 656R 6” x 3/4” x .050”, 6 TPI, wood 02230883 ¼”, 5/16”, 3/8”, 7/16”, 1/2”, 9/₁₆”, ⁵⁄₈”, 11⁄₁₆”, 3⁄4” 02220580 | 02222753 810R 8” x 3/4” x .050”, 10 TPI, wood/metal/plastic 02220578 | 02222754 818R 8” x 3/4” x .035”, 18 TPI, all metal 02220582 | 02222752 956R 9” x 3/4” x .050”, 6 TPI, wood 02220583 | 02222758 110R 12” x 3/4” x .050”, 10/14 TPI, wood/metal/plastic 02220585 | 02222755 156R 12” x 3/4” x .050”, 6 TPI, wood

^POWER BLAST TECHNOLOGY™ INCREASES BLADE LIFE. Patented design for ultimate durability and speed when cutting clean wood or nail-embedded wood.

RECIPROCATING SAW BLADE KIT 02210734 15 pieces. (5) 614R blades, (5) 618R blades, (5) 656R blades, Storage Case.

WOLF-BAND® PORTABLE BAND SAW BLADES High speed steel teeth provide a strong, long lasting cutting edge. Sold in 5 blade or 25 blade packs. 447/8” x 1/2” x .023” 02280098 | 02238423 10/14 TPI, ¼” & larger app. 02280099 | 02238427 14/18 TPI, 1/8”-5/16” app. 02280108 | 02238425 18 TPI, 3/32”-¼” app.

LENOX BAND-ADE SAWING FLUID SAVE 15% 02268003 (1) 5 gallon pail. Sawing fluids are used for cooling and lubricating during sawing ON ALL operations. These fluids improve cutting rate, LENOX BAND finish and extend tool-life. SAW BLADES

WWW.DILLONSUPPLY.COM • 1-800-849-3900 ELECTRICIAN’S SPEED SLOT® HOLE SAW KIT CONTRACTOR’S BIG DADDY ™ SPEED SLOT® 02230802 17 pieces. Contains 3/4”, 7/8”, 11/8”, 13/8”, HOLE SAW KIT 13/4”, 2”, 21/2”, 211/16”, 3”, 35/8”, 41/8”, 43/4” hole saws. 02230804 26 pieces. Contains 3/4”, 7/8”, 1”, 11/8”, 13/8”, 11/2”, Standard Arbor 1L. Three pilot drills. 13/4”, 2”, 21/8”, 21/4”, 21/2”, 211/16”, 3”, 31/4”, 33/8”, 35/8”, 33/4”, 41/8”, 41/2”, 43/4” hole saws. Standard Arbor 1L. Three pilot drills.

CONTRACTOR’S SPEED SLOT® HOLE SAW KIT 02230820 17 pieces. Contains 5/8”, 3/4”, 7/8”, 1”, 11/8”, 11/4”, 13/8”, 11/2”, 13/4”, 2”, 21/2”, 3” hole saws. Standard Arbor 1L. Three pilot drills.

BI-METAL SPEED SLOT® HOLE SAWS Optimized tooth design penetrates metal with ease; Larger, sharper teeth; Speed Slot with staircase design for fast, easy plug ejection 02230010 30010 10L 5/8 02230032 30032 32L 2 02230012 30012 12L 3/4 02230034 30034 34L 2 1/8 02230014 30014 14L 7/8 02230036 30036 36L 2 1/4 02230016 30016 16L 1 02230038 30038 38L 2 3/8 02230018 30018 18L 1 1/8 02230040 30040 40L 2 1/2 02230020 30020 20L 1 1/4 02230044 30044 44L 2 3/4 02230022 30022 22L 1 3/8 02230048 30048 48L 3 02230024 30024 24L 1 1/2 02230056 30056 56L 3 1/2 02230026 30026 26L 1 5/8 02230064 30064 64L 4 02230028 30028 28L 1 3/4 02230072 30072 72L 4 1/2 02230030 30030 30L 1 7/8 02230096 30096 96L 6

GENERAL PURPOSE PLUS HAND PAD 15659747 6” x 9”. Great for light cleaning, deburring and finishing. This pad can be used on machinery, metal parts, plastic, solid surface and stone. UOM: 20 EA/BOX

HOLE SAW ARBORS Split point pilot drill for faster penetration and less NON-WOVEN SCOURING HAND PAD walking; hardened carbon steel for strength. 15659395 9” X 6”, Very fine grade, 02230001 1L HOLLOW HEX 1/2 SHANK [9L-19L] Aluminum Oxide Abrasive. 240/360 Grit, Green. Best used in deburring, 02230002 2L SOLID HEX 1/2 SHANK [20L-96L] surface preparation and as a final 02230005 5L HEX 3/8 SHANK [9L-19L] finishing step. UOM: 20 EA/BOX

WWW.DILLONSUPPLY.COM • 1-800-849-3900 RIGHTCUT CUT-OFF WHEELS 15523602 41/2” x .045” x 7/8”, Type 1, Flat (25/box) 15523604 6” x .045” x 7/8”, Type 1, Flat (25/box) 15581954 41/2” x .045” x 7/8”, Type 27, Depressed Center (25/box) 15519551 6” x .045” x 7/8”, Type 27, Depressed Center (25/box)

DEPRESSED CENTER GRINDING WHEELS 15530432 41/2” x 1/4” x 5/8-11”, Type 27 (10/box) 15530611 41/2” x 1/4” x 7/8”, Type 27 (25/box) 15530615 5” x 1/4” x 7/8”, Type 27 (25/box) 15501865 6” x 1/4” x 7/8”, Type 27 (20/box)

CUT-OFF WHEELS (10/box) 15506626 14” x 3/32” x 1”, Chow Saw, Type 1, Long Life 15535386 14” x 1/8” x 1”, High Speed Saw, Reinforced, 24 Grit

FLAP DISCS 41/2” x 7/8” 41/2” x 5/8-11” 15699004 Type 27, 40 Grit (10/box), Plastic 15599059 Type 27, 40 Grit (10/box) 15699005 Type 27, 60 Grit (10/box), Plastic 15600172 Type 27, 60 Grit (10/box) 15600139 Type 27, 80 Grit (10/box), Plastic 15600173 Type 27, 80 Grit (10/box) 15699063 Type 27, 40 Grit (10/box), Fiberglass 15699064 Type 27, 60 Grit (10/box), Fiberglass 15600177 Type 27, 80 Grit (10/box), Fiberglass

DIE GRINDER PACKAGE 15608001 Includes: (1) Norton Die Grinder with 1/8” & 1/4” collets, (100) ⅜” x 1½” x ⅛”, 80 grit Norton Metal R265 Cartridge Rolls (10) 1” x 1” x ¼” shank, 60 grit Norton Blaze R920 Flap Wheels (5) 1” x 1” W220, ¼” x 1½” spindle Norton Gemini 38A60-P Mounted Points (1) ½” x 1” SF5 Norton Double-Cut Carbide Burr

MINI AIR SANDER PACKAGE 15650077 Includes: (1) Norton 2” Mini Air Sander, (25) 2” Norton Blaze R980P TR Discs, (50) 2” Norton Rapid Prep Vortex Non-Woven TR Discs, & (1) Quick-Change Back-Up Pad

WWW.DILLONSUPPLY.COM • 1-800-849-3900 METALITE K 225 CLOTH ROLL 2X50 YDS Split point pilot drill for faster penetration and less walking; hardened carbon steel for strength.

15626299 P80-J (Course Grit) 15626297 P120-J (Medium Grit) 15626296 P150-J (Fine Grit) 15626294 P220-J (Very Fine Grit) 15626291 P320-J (Extra Fine Grit)

SMALL & LARGE DIAMETER SAW BLADES Wet/Dry Cutting; Great for the following applications: Cured Concrete, Brick, Block + more

01707005 4.5 X .080 X 7/8-5/8 Y100 General Purpose, Turbo Rim 01707010 7 X .095 X U/A Y100 General Purpose, Turbo Rim 01715499 4 1/2 x .080 x 7/8-5/8 Y100 General Purpose, Segmented 01715879 7 X .095 X U/A Y100 General Purpose, Segmented 20709092 9 x .095 x 7/8-5/8 Y100 General Purpose, Segmented 01701412 14 X .125 X 1/20mm Y100 General Purpose, Segmented 01707008 14 X .125 X 1/20mm AP100 All-Purpose, Alt. Turbo Segmented

DRE5 HAND HELD CORE DRILL BY EIBENSTOCK 01707040 15AMP drill with Integrated level bubble on motor and handle, with 100% Aluminum housing.

SMD08 CORE DRILL BY HAKKEN 00489008 Motor comes with slip clutch that can be easily ad- justed from outside the motor; 4 adjustable leveling screws for drilling uneven surfaces; Double insulated construction Water valve swivels 360 degrees; Engineered for both vertical and horizontal drilling; Light weight drill is easy to carry and lift for wall drilling

PREMIUM ZZ TURBO CORE BITS 8mm (.315”) segment height, 14” barrel length; Wet Cut Application(s): Hard Concrete, Brick, Reinforced Concrete, Concrete Block

01740020 2 X 1 1/4-7 02014JWZGH-1 01740025 2 1/2 X 1 1/4-7 02514JWZGH-1 01740030 3 X 1 1/4-7 03014JWZGH-1 01740040 4 X 1 1/4-7 04014JWZGH-1

WWW.DILLONSUPPLY.COM • 1-800-849-3900