DOCSLIB.ORG

2005 Resource Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
2005 Resource Catalog The Resource For All Your Welding, Gases and Safety Supplies! DW802 DW402 Heavy-Duty 4-1/2" Small Heavy-Duty 4-1/2" Angle Grinder Small Angle Grinder • 9.0 amp, 1000 MWO Motor designed for faster material removal and higher overload protection • Keyless Adjustable Guard adjusted without • 7.5 Amp, 10,000 rpm motor provides high power, the use of tools overload protection and speed for 4-1/2" grinding • Automatic Turn-Off Brushes shut down the tool applications when brushes need to be changed to avoid tool • AC/DC capacity works off welding machines and damage generators for increased productivity and versatility Includes: keyless adjustable guard, matched Includes: depressed center wheel, wrench, backing flanges, grinding wheel, wrench and side handle flange, clamp nut guard and 3 position side handle DW827 DW818 Heavy-Duty 6" (150mm) Heavy-Duty 4-1/2" (115mm) Cut Off Tool / Small Small Angle Grinder Angle Grinder • 9 Amp AC/DC motor, 11,000 rpm operating • 12 Amp AC/DC motor, 9,000 rpm provides speed for high power in all 4-1/2" grinding high power and speed for 6" grinding applications applications • Sliding switch is convenient for extended • Metal gear case dissipates heat for longer use applications bearing, gear, and motor life • Keyless adjustable guard allows for easy Includes: 2 position side handle, depressed positioning of safety guard without tools center wheel, wrench, backing flange, clamp nut Includes: 2 position side handle, depressed center and guard wheel, wrench, backing flange, clamp nut, Type 27 keyless guard, Type 1 keyless guard D28494S D28474W Heavy-Duty 7" (180mm) Heavy-Duty 7" (180mm) Large Angle Grinder Large Angle Grinder • High power 4 HP motor with overload protection • High power 4 HP (maximum motor HP) motor with provides higher operating speeds under load overload protection provides higher operating • 6,000 rpm speed is designed for versatility in speeds under load a variety of applications • 8,000 rpm provides optimal material removal with Includes: 7" guard and side handle 7" grinding wheels Includes: 7" guard, side handle, 7" grinding wheel Copyright 2004. The following are examples of trademarks for one or more DEWALT® power tools and accessories. The yellow and black scheme; the "D" shaped air intake Grill; the array of pyramids on the handgrips; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. 10.1 The Resource - (Power Tools) The Resource For All Your Welding, Gases and Safety Supplies! D28497 D28499X Heavy-Duty 7" / 9" Heavy-Duty 7" & 9" 5.3 HP Large Angle Sander Large Angle Grinder • High power 4 HP motor with overload • High power 5.3 HP motor with overload protection protection provides higher operating provides higher operating speeds under load speeds under load • 6,000 rpm provides optimal material removal with • 6,000 rpm is a midrange speed for use 9" grinding wheels with multiple accessories Includes: 7" & 9" guard and side handle • 3 position side handle Includes: side handle DW870 DW871 Heavy-Duty 14" Heavy-Duty 14" (355mm) Chop Saw (355mm) Chop Saw • 15.0 Amp/3.2 HP motor provides overload • Powerful 15.0 Amp/5.3 HP motor provides more capacity, increasing performance and durability overload capacity, increasing performance and • Quick-lock vise allows for fast clamping durability on different size materials • Patented tool-free, 45º adjustable • 45º pivoting fence allows for fast and fence accurate angle cuts Includes: 14" abrasive wheel Includes: 14" abrasive wheel and wrench and wrench DW887 DW872 Heavy-Duty 1-1/2" Heavy-Duty 14" (40mm) Die Grinder Multi-Cutter Saw • 3.0 Amp, 25,000 rpm motor provides high • Multi-Cutter cuts 4 times faster than chop saws power and speed for all 1-1/2" grinding and 8 times faster than portable band saws in • Precision 1/4" collet with 1/8" reducing sleeve 2" x 2" x 1/4" angle iron securely holds all proper accessories • 14" 70 tooth carbide tipped blade delivers a • Available in 220V lower cost-per-cut Includes: 2 wrenches, 1/4" collet,1/8" reducing sleeve DW7745 14" 90T Light Gauge DW888 Ferrous Metal Cutting Blade Heavy-Duty 2" DW7747 14" 70T Heavy Gauge (50mm) Die Grinder Ferrous Metal Cutting Blade • 5.0 Amp, 19,000 rpm motor provides high DW7749 power and speed for all 2" grinding applications 14" 90T Stainless Steel Includes: 2 wrenches, 1/4" collet , 1/8" reducing Cutting Blade sleeve , Copyright 2004. The following are examples of trademarks for one or more DEWALT® power tools and accessories. The yellow and black scheme; the "D" shaped air intake Grill; the array of pyramids on the handgrips; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. The Resource - (Power Tools) 10.2 The Resource For All Your Welding, Gases and Safety Supplies! 10.3 The Resource - (Power Tools) The Resource For All Your Welding, Gases and Safety Supplies! DW4518/DW4514 DW8001/DW8002/DW8003 General Purpose General Purpose Cutting & Grinding Wheel Chop Saw Wheels DW4518 - 4-1/2" x 1/8" x 7/8" General Purpose DW8001 - 14" x 7/64" x 1" General Purpose Chop Saw Wheel Metal Cutting Wheel DW8002 - 14" x 7/64" x 1" Bar Cutter Chop Saw DW4514 - 4-1/2" x 1/4" x 7/8" General Purpose Wheel (Heavy Metal) Metal Grinding Wheel DW8003 - 14" x 7/64" x 1" Stud Cutter Chop Saw Wheel (Light Metal) DW4949/DW4999 DW8062/DW8064 General Purpose Metal/ Thin Cutting Cutting & Grinding Cut Off Wheel DW4949 - 9" x 1/4 x 7/8" General Purpose Metal DW8062 - 4-1/2" x .045 x 7/8" Metal Thin Cut-off Wheel - Grinding Wheel Type 1 Flat Cutting Wheel DW4999 - 7" x 1/4" x 5/8"-11" General Purpose Metal DW8064 - 6" x .055 x 7/8" Metal Thin Cut-off Wheel - Grinding Wheel Type 1 Flat Cutting Wheel DW4960/DW4964 DW8724/DW8725 Heavy-Duty Metal Grinding Heavy-Duty Cut Off Steel Backed Cup Wheel Wheel DW4960 - 4"x2"x5/8"-11 Concrete/Masonry Grinding DW8724 - 4"x0.35"x 5/8" A60T Metal Thin Cut-Off Wheel Type 1 DW4964 - 6"x2"x5/8"-11 Metal Grinding DW8725 - 6" x .040" x 7/8" A60T Metal Thin Cut-Off Wheel Type 1 DW1969 29 Piece Pilot Point® Drill Bit Set • Pilot Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough • No-Spin shank eliminates the frustration of bit spinning in the chuck • Tapered web provides greater durability to reduce breaking • Size markings are located above the shank to prevent wearing away • Includeds Tough CaseTM Copyright 2004. The following are examples of trademarks for one or more DEWALT® power tools and accessories. The yellow and black scheme; the "D" shaped air intake Grill; the array of pyramids on the handgrips; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool. The Resource - (Power Tools) 10.4 The Resource For All Your Welding, Gases and Safety Supplies! Die Grinders Die Approx. Free Grinder Horse Capacity Speed Model Description Power in RPM 5000 Micro Die Grinder .1 1/8 54,000 5001 Steel Die Grinder .33 1/4 18,000 5002A Die Grinder .33 1/4 22,000 5003B Angle Die Grinder .33 1/4 20,000 5009 Die Grinder .6 1/4 20,000 Angle Grinders Angle Approx. Spindle Free Grinder Horse Size Capacity Speed Model Description Power in in RPM 5006 4" Angle Grinder .6 3/8 4 11,000 5007 5" Angle Grinder .6 5/8 5 11,000 5008A 7" Angle Grinder 2 5/8 7 7,600 Horizontal/Vertical Grinders Production Approx. Spindle Free Grinder Horse Size Capacity Speed Model Description Power in in RPM 5020 9" Vertical Grinder 3 5/8 9 5,900 5022 7" Vertical Grinder 3 5/8 7 5,900 Vertical Edger Cut Free Edger Rate Speed Model Description (Steel) RPM EVE-317* Vertical Edger 3m/min 11,500 *Includes one set of EVE-317C6 cutting tips and adjustment wrenches ■ Custom carbide cutters allow a R1 to R4 radius cut ■ Uniform edging eliminates excessive material removal EAGLE’S EVE-317 IS THE LATEST TECHNOLOGY FOR ■ Increased productivity compared to standard grinding methods ■ Finished work, speeds welding process BEVELING THE EDGES OF FLAT PANEL STEEL. ■ Ideal for weld preparation, providing clean burr-free edges ■ No grinding wheels 10.5 The Resource - (Power Tools) The Resource For All Your Welding, Gases and Safety Supplies! ADDRESSING HANDHELD HEAVY-DUTY AND ABRASIVE TOOL APPLICATIONS Ratchet Wrenches Ratchet Working Square Free Wrench Torque Drive Speed Model Description ft-lbs in RPM 1001 3/8" Ratchet 10-40 3/8 150 1005 1/2" Ratchet 10-80 1/2 150 Impact Wrenches Impact Working Square Free Wrench Torque Drive Speed Model Description ft-lbs in RPM 1003 3/8" Impact Wrench 10-70 3/8 9,000 1015 3/4" Impact Wrench 150-500 3/4 4,500 2263 1/2" Composite Impact Wrench 665 1/2 7,800 2263-L 1/2" Composite Impact Wrench 665 1/2 7,800 with Extended Anvil Drills Chuck Free Drill Size Speed Model Description in RPM 3002A 3/8" Reversible Drill 3/8 1,800 3005 1/2" Drill 1/2 500 3006 1/2" Reversible Drill 1/2 800 3007 3/8" Drill 3/8 2,600 Percussion Tools Percussion Chisel Blows Tool Shank Per Model Description Opening Stroke Minute 4004 Flux Chipper .401" 1-1/8" 4,600 4005 Needle Scaler .401" 1-1/8" 4,600 4009 2" Chipping Hammer .680 RD 2" 1,900 .580 Hex ASK YOUR DISTRIBUTOR FOR AN "EAGLE" CATALOG! The Resource - (Power Tools) 10.6 The Resource For All Your Welding, Gases and Safety Supplies! 10.7 The Resource - (Power Tools) The Resource For All Your Welding, Gases and Safety Supplies! The Resource - (Power Tools) 10.8 The Resource For All Your Welding, Gases and Safety Supplies! 10.9 The Resource - (Power Tools) The Resource For All Your Welding, Gases and Safety Supplies! The Resource - (Power Tools) 10.10 The Resource For All Your Welding, Gases and Safety
Load more

Recommended publications
  • Pneumatic Tool Safety Guidelines Read and Understand Applicable Sections Before Operating Portable Hand Air Tools! Safety Signal Words
    SAFETY_Doc:Layout 1 5/21/09 4:58 PM Page 1 PNEUMATIC TOOL SAFETY GUIDELINES READ AND UNDERSTAND APPLICABLE SECTIONS BEFORE OPERATING PORTABLE HAND AIR TOOLS! SAFETY SIGNAL WORDS DANGER: Indicates a hazardous situation that, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations. WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. It may also be used without the safety alert symbol as an alternative to “NOTICE.” NOTICE: “NOTICE” is the preferred signal word to address practices not related to personal injury. The safety alert symbol shall not be used with this signal word. As an alternative to “NOTICE”, the word “CAUTION” without the safety alert symbol may be used to indicate a message not related to personal injury. SAFETY SYMBOLS Dynabrade Inc. safety labels follow the guidelines outlined in ISO 3864-2:2004. In order to help users understand the meaning of the safety labels, the standard allows the reproducing of the figures and captions below. Geometric surround shapes: Warning - A black graphical symbol Prohibition - A black graphical Mandatory action - A white inside a yellow triangle with a black symbol inside a red circular band graphical symbol inside a blue circle triangular band defines a safety sign with a red diagonal bar defines a defines a safety sign that indicates that indicates a hazard. safety sign that indicates that an that an action shall be taken to avoid action shall not be taken or a hazard.
    [Show full text]
  • 15. Pneumatic Tools
    PNEUMATIC TOOLS Innovation is our mission! GD_KP_$KT-K14-$KP-DRUCKLUFT_#SALL_#APR_#V1.indb 484 14.04.2014 14:35:48 1 PAGE 2 REVERSIBLE RATCHET 488 3 DIE & ANGLE DRILLING MACHINES 489 4 SPOT WELD DRILLING MACHINES 490 PIN & DIE GRINDERS 490 - 491 5 ANGLE DIE GRINDER 491 - 492 6 BURNISHER 492 7 GRINDING MACHINES 493 BELT SANDER 493 8 ROUGH GRINDERS 494 9 RANDOM ORBIT SANDERS 494 10 MULTIGRINDER 495 ERASER 495 11 CHISEL HAMMER 495 - 496 12 NEEDLE SCALER 496 13 NIBBLERS 496 SAWING 497 14 LONG-DISC CUTTER 497 - 498 15 METAL SHEARS 498 16 IMPACT WRENCHES 498 - 500 IMPACT WRENCH SETS 500 17 RIVETING TOOLS PISTOL 501 18 OSCILLATING CUTTER 501 19 VIBRO EXTRACTOR 501 AXLE BOOTS ASSEMBLY DEVICES 502 20 OILS & GREASES 502 21 GREASE GUN 502 22 WHEEL FILLING GAUGE 502 - 503 SPRAY GUNS 503 23 AIR BLOW OUT TOOLS 503 - 504 24 VACUUMS 504 25 COMPRESSED AIR HOSE 504 AIR SERVICE UNIT 505 26 PNEUMATIC ADAPTERS & COUPLINGS 505 - 506 27 i GD_KP_$KT-K14-$KP-DRUCKLUFT_#SALL_#APR_#V1.indb 485 14.04.2014 14:35:48 PNEUMATIC TOOLS Advantages Extremely versatile Extremely strong • For hard to reach places • Particularly low air consumption • Particularly low air consumption • Low vibration • Low vibration • Cold insulated handle • Long service life • Long service life • Easy operation • Easy operation • Supplied incl. coupling connector • Supplied incl. coupling connector Composition Cold insolation Adjusting screw for air supply handle adjusts speed and performance Angular transmission with lubrication nipple Compressed air connection with rotating exhaust Collet
    [Show full text]
  • Air Die Grinder Model No: Gsa671.V2
    INSTRUCTIONS FOR AIR DIE GRINDER MODEL NO: GSA671.V2 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE. Refer to Wear ear Wear eye Wear a mask Wear protective instruction protection protection gloves manual 1. SAFETY 9 Follow workshop Health & Safety rules, regulations and conditions when using grinder. WARNING! Disconnect from air supply before changing accessories or servicing. 9 Maintain the grinder in good condition and replace any damaged or worn parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty. WARNING! Check correct air pressure is maintained and not exceeded. We recommended 90psi. 9 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are secure. 9 Wear approved safety gloves, eye and ear protection. If dust is generated wear respiratory protection. 9 Keep grinding tips in good condition for best and safest performance. 9 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes. 9 Secure unstable workpiece with a clamp, vice or other suitable holding device. 9 Ensure the grinding tip is secure in the collet.
    [Show full text]
  • Dynabrade Seam Sealant Removal System of Seam Sealant Material Effective Removal for Fast, D04.10 Rev
    Dynabrade Accessories Dynabrade Seam Reorder No. D04.10 Dynaswivel® Air Line Connector Coupler & Plug Assembly Never Fight an Air Hose Again! Provide Maximum Air Flow to Tools 94300 94990 Sealant Removal System Composite Construction Composite Coupler Assembly • The Dynaswivel® is a patented “universal-joint” that connects portable • Includes one 1/4" NPT female, composite-style coupler and For Fast, Effective Removal of Seam Sealant Material air tools to an air line. (Patent No. D-295,552; D-295,553; D-317,818.) one 1/4" NPT male plug. • Swivels 360° AT TWO PIVOT POINTS allowing the air hose to drop • Lightweight, heavy duty, non-marring composite coupler. directly to the floor while providing superb tool handling. • Easy connect/disconnect by single push-button action. • Improves tool maneuverability and • Plugs all have “ported” design to prevent “starving” of the air tool. ™ air flow, minimizes operator Provides up to twice the air flow compared to standard plug design. • 950 RPM Drill with 3M SRSR CutterCutter fatigue and extends hose life. • 1/4" NPT, non-marring composite construction. ••12,000 12,000 RPMRPM DieDie GrinderGrinder withwith 3M3M™™ Radial Bristle Discs • No No DamageDamage toto UnderlyingUnderlying SurfaceSurface DynaJet In-Line Blow Gun Dynabrade Gear Oil & Grease 94467 95848 Safety Tip Design Gear Oil • Purges air line of water and contaminants before starting up air tools. • 2.5 oz. (74 ml) tube • Connect only once...mounts permanently between coupler and air hose. • Formulated for Dynabrade • Durable aluminum construction, weighs only 2 oz. geared tools utilizing a wick-type • Unit has 1/4" female NPT thread at both lubrication system.
    [Show full text]
  • Metalworking Equipment List
    Cindy Drozda “The Fine Art of Woodturning” P.O. Box 19065 – Boulder, CO 80308 – voice: 303-449-7170 – fax: 720-306-3829 [email protected] - www.cindydrozda.com Tools for the Metal-Equipped Woodshop: First round: Second round: Safety Glasses that protect your eyes completely. Propane/Mapp Gas torch Not just eyeglasses! Your eyes are too important, and 45% Silver bearing solder with Cadmium a particle of metal in the eye is a really bad deal! Blue Flux for Silver Soldering 1-60 drill gauge Drill set with 1-60, 1/16 – ½ by 64ths, A-Z More taps for coarse and fine threads up to at least ½” Wall chart with decimal equivalents and tap sizes Additional tap handles to fit your taps Carbide Scribe with sharp point Bullet Point drills Center Punch with a sharp point – not an automatic Die Grinder with cut-off wheels (for cutting steel) spring-loaded one Skotchbrite wheel for deburring on the grinder Dye-Kem layout fluid Machinery’s Handbook Cutting Oil in a spill-proof pot Saw wax Third round: Taps for 10-32 and ¼-20 threads Tap handle for those size taps Reamers in ¼, 3/8, and ½ (or more!) Hole saws Rolled dowel pins, and ground dowel pins Drill Press vise Height gauge and surface plate (or saw table) Rout-A-Burr de-burring tool Angle plates for above A good supply of screws, nuts, and washers Hurry-Up deburring tool Allen wrenches Set of single flute Weldon countersinks Combination and socket wrenches Threading dies (mostly for cleaning up damaged Single Flute Countersink, 82 degrees threads) Dial Calipers that read in thousandths of an inch Counterbores “Pop” Rivet puller Micrometer 6tpi blade for the bandsaw (non-ferrous metal only) Arbor Press Hacksaw with good blades (for cutting steel) Negative rake, fine tooth, metal cutting carbide table Files: 3-cornered for cleaning up threads, Laminate file saw and/or chop saw blade (non-ferrous metal only) for Aluminum, Half-round, and Round End mills for use in a router, ½” is a good size, 2 flute Thin 6” scale, ½” wide, with markings in 32nds.
    [Show full text]
  • ABAC PRO Tools Brochure
    ABAC Tools and accessories for professionals abacaircompressors.com 2 PRO-TOOLS LEAFLET ABAC. Air. Anytime. Anywhere We are a leading company in compressed air solutions, providing the best compressors, tools and air distribution systems to fulfill even your most demanding needs. Committed to quality, reliability and simplicity, we want to make your life easier with solutions that you can trust and rely upon every day. From oil injected screws to mobile piston compressors, from professional inflating guns to a full range of impact wrenches, ABAC will be the perfect partner to achieve your goals, be it boosting the business or fulfilling an hobbyist dream. Millions of professionals worldwide have chosen us to get the job done. Join the ABAC experience. ABAC TOOLS AND ACCESSORIES FOR PROFESSIONALS 3 ABAC is committed to support all your air requirements. We help you in producing, distributing and using compressed air with a wide range of machines. We provide reliable and efficienct piston and oil injected screw air compressors in multiple configurations, tailored on your needs. There are crucial elements to consider when you have to deal with compressed air. One of the most important is maintaining the right quality of air during the entire chain. By selecting ABAC products you will be able to keep your air clean, avoiding any contamination to come in contact with your business. Ensuring consistent air delivery in each area of your workplace is fundamental to improve efficiency and results. If you are looking for stability, smart connections, leak-proof and corrosion-free pipings you can rely on AIRnet, the most effective solution for your air network.
    [Show full text]
  • Die Grinder 52265 – 18,000 RPM, 6 Mm - Collet 52266 – 20,000 RPM, 6 Mm - Collet Air Motor and Machine Parts
    Parts Page Reorder No. PD02•57 Effective November, 2002 Supersedes PD97•07 Models: 52256 – 15,000 RPM, 1/4" - Collet .7 Hp/Straight Line/Front Exhaust 52257 – 18,000 RPM, 1/4" - Collet 52258 – 20,000 RPM, 1/4" - Collet 52264 – 15,000 RPM, 6 mm - Collet Die Grinder 52265 – 18,000 RPM, 6 mm - Collet 52266 – 20,000 RPM, 6 mm - Collet Air Motor and Machine Parts Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools ! (ANSI B186.1) and any other applicable safety codes and regulations. Please refer to Dynabrade’s WARNING Warning/Safety Operating Instructions for more complete safety information. Index Key 1 2 3 A8 4 5 6 No. Part # Description 1 50010 1/4" Collet Assy. 50015 6 mm Collet Assy. 2 53175 Insulator Collar 3 01371 Lock Ring 4 01727 Felt Silencer 5 Air Control Ring 01724 15,000 RPM 17 N•m T 34 N•m T 17 N•m T 7 01725 18,000 RPM 01726 20,000 RPM 6 04081 Rotor Nut 7 01007 Bearing 8 01121 Shim Pack (3/pkg.) 8 11 12 13 15 16 9 01008 Bearing Plate 10 50767 Pin (2) 11 01010 Spacer 12 01028 Cylinder 13 55025 Rotor 14 01185 Blade (4/pkg.) 15 01722 Bearing Plate 9 10 O1 14 10 16 02649 Bearing 17 01295 Housing 18 57342 Throttle Lever 01089 Safety Lock Lever (optional) 18 19 01017 Pin 20 95558 Retaining Ring 21 01477 Valve Stem 22 95730 O-Ring 20 19 27 A8 23 01024 O-Ring 24 01247 Speed Regulator Assy.
    [Show full text]
  • Tools 3-2018
    2333 Arthur Ave Elk Grove Village, IL 60007 847-439-2202 Fax 847-439-0352 www.acmetruckbrake.com IMPACTS 285B-6 - 1” Heavy-Duty Extended Anvil Impact Wrench $525.00 Delivers 1,770 ft-lb (2,400 Nm) maximum torque 2145QiMAX Impactool™ - 3/4" Drive Impact Gun $509.79 1350 ft-lb maximum reverse torque from a tool that weighs just 7.4 lbs 2235TiMAX - 1/2" Drive Impact Wrench $318.75 1,350 ft-lbs. of nut-busting torque and 930 ft-lbs. of max reverse torque 2115TiMAX - 3/8" "Titanium N Torque" Impact Gun $233.49 300 ft-lb MAX power in reverse from a tool less than 6 in long RATCHETS 2015MAX - 3/8 Impact wrench $268.82 AIR SHEERS 180 ft-lb (244 Nm) max torque and 7,100 rpm 7802SA - Heavy Duty Air Shear $177.80 2025MAX - 1/2 Impact wrench $274.60 180 ft-lb (244 Nm) max torque and 9,000 rpm TIRE BUFFER 327LS - Heavy Duty Air Low-Speed Tire AIR HAMMERS Buffer $98.70 121Q - Super Duty Air Hammer $98.28 122MAX - Short Barrel Vibration Reduced Air AIR NIBBLER Hammer $142.79 325B - Heavy Duty Air Nibbler $157.64 118MAX - Long Barrel Vibration Reduced Air Hammer $142.79 CUT OFF TOOL 117 - Standard Duty Air Hammer $62.93 326 - Heavy Duty Air Cut-Off Tool $58.05 DIE GRINDERS 301B - Air Angle Die Grinder $76.14 PNEUMATIC DRILL 7803RAKC - 1/2" Chuck (13mm Chuck) - 301B-2MK - 2” Air Angle Die Pistol Grip $199.99 Grinder Kit $97.71 3445MAX - 4.5" Air Angle Grinder SCALER $242.22 125 - Standard Duty Needle Scaler $191.47 302B - Air Angle Die Grinder $103.42 19 needles Each needle 1/8" (3.2 mm) 4600 blows per minute at free speed 5108MAX - Air Straight Die Grinder $148.05 Pricing EXTENDED thru May 31, 2018 2333 Arthur Ave Elk Grove Village, IL 60007 847-439-2202 Fax 847-439-0352 www.acmetruckbrake.com HOSE REELS BEAD BLASTER 579.1011 - 5 Gallon Bead Seater 2760-50D - Steel Dual Arm Auto-Retractable Air Hose Reel $155.00 3/8" x 50 ft.
    [Show full text]
  • Power Hand Tool Safety - Die Grinder Use
    Power Hand Tool Safety - Die Grinder Use Within the past three months, three 1.5” Die Grinders were found with improper implements (attachments) installed. Two were Dewalt Model # DW887 grinders and one was a Black & Decker Model # 4287. The first was found to have a wire brush wheel (Max RPM 22,000) and the other two had grinding/cut off wheels installed (Max RPM 10,000). M:\adsafety\Safety\Toolbox\GrindingTools.doc Power Hand Tool Safety - Die Grinder Use (Continued) All three Die Grinders were rated at an operating speed of 25,000 RPM That means the attachments were being used at as much as 2½ times their rated speed (RPM). Obviously that invites a serious accident. Anything with a ¼” shank (including a drill bit) can be installed in a ¼” collet, but that does not mean it is safe to do so. M:\adsafety\Safety\Toolbox\GrindingTools.doc Power Hand Tool Safety - Die Grinder Use (Continued) Die Grinders are designed to do fine, high speed, grinding/polishing of die, molds and other hard to reach areas. They offer No Guarding of the spinning attachment so if you use the wrong attachment; you are subject to injury from: 1. Deep penetrating fine wires (brush wheels) 2. Flying debris – sometimes with enough mass and speed to penetrate skin, arteries, and organs. 3. Lacerations from unprotected grinder/cut off wheels (which can lop off your finger before you can say “ouch!”) And that’s if you’re wearing gloves & goggles! Statistics say that almost 50% of all grinder related injuries in the workplace are caused by human error.
    [Show full text]
  • Combination Pliers
    combination pliers curved claw hammer tin snips chipping hammer combination wrench box end wrench Slotted (flat) screwdriver Phillips screwdriver tongue-and-groove pliers combination square adjustable open-end wrench torque wrench Striker Diagonal pliers Socket extension wire brush Taper tap tap handle safety goggles face shield acetylene regulator and gauges oxygen regulator and gauges ratchet socket impact wrench disk grinder electric drill round point shovel sledge hammer needle nose pliers Allen wrench pipe wrench drill chuck chalk line dust mask C-clamp pipe cutter caulking gun gear puller measuring tape folding rule hand grease gun abrasive cutoff saw speed square conduit bender flat cold chisel oxy-acetylene heating tip (rose bud) oxy-acetylene cutting tip feeler gauge ratcheting pipe die stock ear muffs battery booster cables nut driver Mallet (soft face hammer) center punch oxy-acetylene brazing tip Socket universal joint Dial caliper pin punch bolt cutter electric soldering gun “T” handle tap wrench screw extractor masonry level, 48 inch ratcheting pipe reamer oxy-acetylene torch tip cleaner masonry drill bit open end wrench framing square basin wrench Amp meter half mask (w/ chemical filter) pipe die Retaining ring pliers chuck wrench die grinder file card fire extinguisher flaring tool lineman’s pliers portable hydraulic jack reciprocating saw safety glasses screw pitch gauge scribe square point shovel straight shank drill bit terminal connecting tool threading die tubing cutter tubing wrench welding helmet locking plier wrench circular saw outside micrometer abrasive cutoff saw outside calipers Digital multimeter hole saw dividers.
    [Show full text]
  • Pneumatic Grinders Pneumatic GROBET US GROBET Grinders GROBET US GROBET Pneumatic Grinders a a TM TM No
    GROBETGROBET USUSAATMTM PneumaticPneumatic GrindersGrinders No. 34.901 Grobet Pneumatic Grinders Carlstadt, NJ, 07072 CATGPG05 GROBET USA TM Pneumatic Grinders A durable yet economical choice, offering longer-life and higher free speed (RPM’s). A general purpose tool designed for porting, light weld grinding, and breaking sharp edges. 34.900 Micro Die Grinder Air Air Air Net RPM Collet Inlet Size Pressure Consumption Weight 56,000 1/8" Collet Std. 1/4"-FNPT 90 PSI 7 CFM .5 LBS 3/32"& 3mm optional Precision • The Micro Grinder comes with 2 collet Length Exhaust Power Bearings Parts Throttle wrenches and the air line fitting. 5.85 in. Rear 1/10 H.P. Ultra Machined Roll Type for • The Micro Grinder has a built in silencer for Precision Steel Instant Speed quieter operation. Adjustment Micro Die Grinder Options 34.922 34.905 34.906 34.907 34.924 FNPT FITTING(Female) 3/32" Collet 3 MM Collet 1/8" Collet Repair Kit Specification for Air Tools 34.901 90o Angle Die Grinder Air Air Air Net RPM Collet Inlet Size Pressure Consumption Weight 20,000 1/4" Collet Std. 1/4"-MNPT 90 PSI 15 CFM 1.1 LBS 1/8", 3&6mm optional Precision Length Exhaust Power Bearings Parts Throttle 6.25 in. Rear 1/3 H.P. Ball Steel Self Locking Type Gears with Safety Lockout Throttle allows for variable speed 90o Angle Die Grinder Options 34.923 34.909 34.908 34.910 34.911 34.925 MNPT FITTING(Male) 6mm Collet 1/4" Collet 1/8" Collet 3mm Collet Repair Kit All grinders are covered by a 30 day warranty -- Repair kits include bearigs, o-rings, spacers, washers and springs Specification for Air Tools 34.902 Extended Length Die Grinder Air Air Air Net RPM Collet Inlet Size Pressure Consumption Weight 25,000 1/4" Collet Std.
    [Show full text]
  • 1Hp Vacuum Die Grinder Effective October, 2009 Trimmable Shroud/Straight Line/Rear Exhaust Air Tool Manual – Safety, Operation and Maintenance
    Parts Page Reorder No. PD09•49 1hp Vacuum Die Grinder Effective October, 2009 Trimmable Shroud/Straight Line/Rear Exhaust Air Tool Manual – Safety, Operation and Maintenance SAVE THIS DOCUMENT, EDUCATE ALL PERSONNEL Models: 56743 – 12,000 RPM – 1/4" & 6 mm Collet 56747 – 20,000 RPM, 1/4" Collet – 1/4" & 6 mm Collet FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES AT WWW.DYNABRADE.COM WARNING Read and understand this tool manual before operating your air tool. Follow all safety rules for the protection of operating personnel as well as adjacent areas. Always operate, inspect and maintain this tool in accordance with the American National Safety Institute (ANSI) Safety Code for Portable Air Tools – B186.1. For additional safety information, refer to Safety Requirements for the Use, Care and Protection of Abrasive Wheels – ANSI B7.1, Code of Federal Regulation – CFR 29 Part 1910, European Committee for Standards (EN) Hand Held Non-Electric Power Tools – Safety Requirements and applicable State and Local Regulations. SAFETY LEGEND WARNING WARNING Read and understand tool manual before Practice safety requirements. Work alert, work starts to reduce risk of injury to have proper attire, and do not operate tools under operator, visitors, and tool. the influence of alcohol or drugs. WARNING WARNING Eye protection must be worn at all times, Ear protection to be worn when exposure to sound, eye protection to conform to ANSI Z87.1. exceeds the limits of applicable Federal, State or local statues, ordinances and/or regulations. WARNING WARNING Respiratory protection to be used when exposed to Air line hazard, pressurized supply lines and flexible contaminants that exceed the applicable threshold hoses can cause serious injury.
    [Show full text]