Quick viewing(Text Mode)

Power Tool Solutionstm for the Welding Industry

Power Tool Solutionstm for the Welding Industry

TM POWER SOLUTIONS FOR THE INDUSTRY TM SOLUTIONS

Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material removal, finishing, maintenance, Impact automotive, or assembly — Eagle Group has your solution.

Eagle Group has been a supplier of power tools for over 30 years throughout the United States, Mexico and South America. Located in Portland, Oregon, Eagle resides in AIMCO’s corporate complex.

Percussion Tools

Fastening Tools

Cutting Tools

CALL TODAY TOLL FREE: Accessories 1-877-273-3903 TABLE OF CONTENTS

Grinders ...... 4 Grinders Angle Grinders Pencil Grinders Die Grinder Kit Vertical Grinders

Percussion Tools ...... 13 Air Chipping Hammers Needle Scalers Flux Chippers Scaler/Chipper Replacement Needles

Cutting/Specialty Tools . . . 16 Blow Guns

www.eagle-premier.com 3 GRINDERS

INDUSTRIAL DUTY 5I-06251 5I-10202 INDUSTRIAL DUTY

1/4" Die Grinder 1/4" Die Grinder

l Heavy duty steel housing. l Lightweight design with smooth l Compact size. performance. l Safety lockout throttle lever l Erickson precisely grips prevents accidental tool start. attachments and result in minimal runout. l Safety lockout throttle lever prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 20,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.45 lb / .66 kg Weight: ...... 2.82 lb / 1.28kg Length: ...... 6.5 in / 16.5 cm Length: ...... 7.9 in / 20.06 cm Approximate Power: ...... 0.60 hp Approximate Power: ...... 1.00 hp Air Usage: ...... 19 cfm Air Usage: ...... 32 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 3/8"

INDUSTRIAL DUTY INDUSTRIAL DUTY 5I-04252 5I-06222

1/4" Composite Die Grinder 1/4" Composite Die Grinder

l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start. prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 22,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1 lb / 0.46 kg Weight: ...... 1.58 lb / 0.72 kg Length: ...... 7 in / 17.9 cm Length: ...... 7.8 in / 19.8 cm Approximate Power: ...... 0.40 hp Approximate Power: ...... 0.60 hp Air Usage: ...... 25 cfm Air Usage: ...... 30 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

4 www.eagle-premier.com GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5I-03302F 5I-03302

1/4" Die Grinder 1/4" Die Grinder l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start prevents accidental tool start. l Front exhaust. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 30,000 RPM - Approximate: ...... 30,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Front Exhaust: ...... Rear Weight: ...... 1 lb / .45 kg Weight: ...... 1 lb / .45 kg Length: ...... 6.5 in / 16.5 cm Length: ...... 6.5 in / 16.5 cm Approximate Power: ...... 0.30 hp Approximate Power: ...... 0.30 hp Air Usage: ...... 20 cfm Air Usage: ...... 20 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

51055200EC GENERAL DUTY 5201EC GENERAL DUTY 1/4" Composite Die Grinder 1/4" Composite Mini Die Grinder l Lightweight and durable. l Lightweight and durable. l Ergonomic composite housing l Ergonomic composite housing with a soft comfortable grip. with a soft comfortable grip. l For blending, smoothing l Good for light weld grinding, and sanding. polishing, and breaking l Less noise, vibration, sharp edges. and thermal transfer than l Less noise, vibration, and thermal aluminum tools. transfer than aluminum tools. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 22,000 RPM - Approximate: ...... 25,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.3 lb / 0.59 kg Weight: ...... 0.8 lb / 0.36 kg Length: ...... 6.75 in / 17.1 cm Length: ...... 6.25 in / 15.9 cm Approximate Power: ...... 0.75 hp Approximate Power: ...... 0.50 hp Air Usage: ...... 14 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 5 7 GRINDERS

5110 GENERAL DUTY 5002C GENERAL DUTY

1/4" Mini Die Grinder 1/4" Die Grinder

l Good for light weld l Compact and lightweight. grinding, polishing, and l All ball bearing construction. breaking sharp edges. l Rib textured handle provides l Air regulator allows firm grip. operator to control speed. l For blending, smoothing and porting. l 1/8" collet available. Part #32046-31-02. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 22,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 0.8 lb / 0.4 kg Weight: ...... 1.2 lb / 0.5 kg Length: ...... 4.8 in / 12.2 cm Length: ...... 6.9 in / 17.5 cm Approximate Power: ...... 0.38 hp Approximate Power: ...... 0.33 hp Air Usage: ...... 14 cfm Air Usage: ...... 14 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

GENERAL DUTY GENERAL DUTY 5001 51055206EC 1/4" Composite Die Grinder, 1/4" Die Grinder 3" Extended l All steel housing. l Lightweight and durable. l Built-in regulator. l Extended length for l 1/8" collet available. hard to reach areas. l Ergonomic composite housing with a soft comfortable grip. l For blending, smoothing and porting. l Less noise, vibration, and thermal transfer than aluminum tools. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 18,000 RPM - Approximate: ...... 25,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Lever Exhaust: ...... Front Exhaust: ...... Rear Weight: ...... 1.3 lb / 0.6 kg Weight: ...... 1.43 lb / 0.65 kg Length: ...... 6.5 in / 16.5 cm Length: ...... 9.25 in / 23.5 cm Approximate Power: ...... 0.33 hp Approximate Power: ...... 0.60 hp Air Usage: ...... 14 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

6 www.eagle-premier.com GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5I-04252X 5I-06202X 1/4" Composite Die Grinder, 1/4" Composite Die Grinder, 5" Extended 5" Extended l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start. prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 20,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.40 lb / 3.08 kg Weight: ...... 2.31 lb / 1.05 kg Length: ...... 12.2 in / 30.9 cm Length: ...... 13.03 in / 3.31 cm Approximate Power: ...... 0.40 hp Approximate Power: ...... 0.60 hp Air Usage: ...... 25 cfm Air Usage: ...... 30 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

5207EC GENERAL DUTY 5116 GENERAL DUTY 1/4" Composite Die Grinder, 1/4" Die Grinder, 5" Extended 6" Extended l Lightweight and durable l All ball bearing construction. l Extended length for l Extended length for hard to reach areas. hard-to-reach areas. l Ergonomic composite housing l Rib textured handle with a soft comfortable grip. provides firm grip. l For blending, smoothing and porting. l For blending, smoothing l Less noise, vibration, and thermal and porting. transfer than aluminum tools. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 22,000 Throttle Type: ...... Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.45 lb / 0.66 kg Weight: ...... 2.75 lb / 1.2 kg Length: ...... 11.25 in / 28.6 cm Length: ...... 13 in / 30.5 cm Approximate Power: ...... 0.60 hp Approximate Power: ...... 0.33 hp Air Usage: ...... 12 cfm Air Usage: ...... 14 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 7 GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5A-04202 5A-04122 1/4" Composite Angle Die Grinder, 1/4" Composite Angle Die Grinder, 90o 90o l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start. prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 12,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.3 lb / .59 kg Weight: ...... 1.3 lb / .59 kg Length: ...... 7.2 in / 18.2 cm Length: ...... 7.2 in / 18.2 cm Approximate Power: ...... 0.40 hp Approximate Power: ...... 0.40 hp Air Usage: ...... 19 cfm Air Usage: ...... 20 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

GENERAL DUTY 5202EC 5203EC GENERAL DUTY 1/4" Composite Angle Die Grinder, 1/4" Composite Angle Die Grinder, 90o 105o l Lightweight and durable. l Lightweight and durable. l Ergonomic composite housing l Ergonomic composite housing with a soft comfortable grip. with a soft comfortable grip. l Less noise, vibration, and thermal l Best for grinding and polishing transfer than aluminum tools. in hard to reach areas. l Right angle provides easy access. l Less noise, vibration, and thermal l For sanding, polishing, transfer than aluminum tools. deburring and porting. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 20,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.1 lb / 0.55 kg Weight: ...... 1.1 lb / 0.55 kg Length: ...... 6.25 in / 15.9 cm Length: ...... 6.25 in / 15.9 cm Approximate Power: ...... 0.60 hp Approximate Power: ...... 0.60 hp Air Usage: ...... 12 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

8 www.eagle-premier.com GRINDERS

GENERAL DUTY 5003C 5000 GENERAL DUTY

1/4" Angle Die Grinder Pencil Grinder l Compact lightweight design. l Excellent for blending / finishing work. l Ball bearing construction. l High speed precision. l For sanding, deburring l Complete with air hose, and polishing. exhaust hose, and integral silencer. l Right angle provides easy access.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/8" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 54,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Twist Exhaust: ...... Rear Exhaust: ...... Rear Hose Weight: ...... 1.0 lb / 0.5 kg Weight: ...... 0.6 lb / 0.3 kg Length: ...... 6.3 in / 15.9 cm Length: ...... 5.3 in / 13.3 cm Approximate Power: ...... 0.33 hp Approximate Power: ...... 0.10 hp Air Usage: ...... 14 cfm Air Usage: ...... 6 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

5102K INDUSTRIAL DUTY 5205-2EC GENERAL DUTY Pistol Mini 3" , 105o Die Grinder Kit l Complete with: l Egronomic and safe use design. - 1/8" & 1/4" collet l 105° angled head design - 5 ea. 1/8" grinding stones for improved sight lines - 5 ea. 1/4" grinding stones and spark angle. l Convenient speed regulator, l Tight access use. direct drive, no angle gears, and l 1/16" to 1/4" wheel capability. an ergonomic design for operator comfort and control.

Specifications: Specifications: Collet Size: ...... 1/8" & 1/4" Collet Size: ...... 3" RPM - Approximate: ...... 15,000 RPM - Approximate: ...... 15,000 Throttle Type: ...... Trigger Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.5 lb / 0.7 kg Weight: ...... 1.5 lb / 0.68 kg Length: ...... 3.5 in / 8.9 cm Length: ...... 8.25 in / 21 cm Approximate Power: ...... 0.38 hp Approximate Power: ...... 0.60 hp Air Usage: ...... 4 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 9 GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5104 5105 4" Angle Grinder 5" Angle Grinder

l All steel l All steel internal parts. internal parts. l Four step heat l Four step treat process. heat treat process. l Sandcast housing. l Sandcast housing. l Uses Type 27 wheels and l Uses Type 27 wheels abrasive discs. and abrasive discs.

Specifications: Specifications: Wheel Capacity: ...... 4" Wheel Capacity: ...... 5" Spindle Type: ...... 3/8" - 24 Spindle Type: ...... 5/8" - 11 RPM - Approximate: ...... 13,500 RPM - Approximate: ...... 10,800 Throttle Type: ...... Push button with lever Throttle Type: ...... Push button with lever Exhaust: ...... Front right Exhaust: ...... Front right Weight: ...... 4.4 lb / 2.0 kg Weight:...... 4.4 lb / 2.0 kg Length: ...... 8.3 in / 21.1 cm Length: ...... 8.3 in / 21.1 cm Approximate Power: ...... 1.00 hp Approximate Power: ...... 1.00 hp Air Usage: ...... 34 cfm Air Usage:...... 34 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

INDUSTRIAL DUTY 5195EC INDUSTRIAL DUTY 5194EC 5196EC 4" Composite Angle Grinder 4.5" / 5" Composite Angle Grinder l Swivel guard adjustable l Swivel guard adjustable in nine steps. in nine steps. l Composite body, l Composite body, spindle lock, rear exhaust, spindle lock, rear exhaust, quiet operation. quiet operation. l Reversible side handle. l Reversible side handle. l Governed motor. l Governed motor. l 5195EC: 4.5" 5196EC: 5" Specifications: Specifications: Adjustable in nine steps Adjustable in nine steps Spindle: ...... 3/8" - 24 Spindle: ...... 5/8" - 11 RPM - Approximate: ...... 12,000 RPM - Approximate: ...... 12,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 3.80 lb / 1.72 kg Weight: ...... 3.8 lb / 1.72 kg Length: ...... 9.6 in / 24.4 cm Length: ...... 9.6 in / 24.4 cm Approximate Power: ...... 1.30 hp Approximate Power: ...... 1.30 hp Air Usage: ...... 25 cfm Air Usage: ...... 25 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" P/N # 5194EC KIT with #8101 and #8103 P/N # 5195EC KIT / 5196EC KIT with #8101 and #8102

10 www.eagle-premier.com GRINDERS

GENERAL DUTY GENERAL DUTY 5006 5007

4" Angle Grinder 5" Angle Grinder l Governed motor. l Governed motor. l 5/8" - 11 l 5/8" - 11 adapter included. adapter included. l Uses Type 27 wheels, l Uses Type 27 wheels, abrasive discs. abrasive discs. l Spiral bevel gearing for extended life, low vibration. l Spiral bevel gearing for extended life, low vibration. l For weld prep, smoothing, rust removal and deburring. l For weld prep, smoothing, rust removal, deburring. l Lightweight aluminum alloy housing. l Rugged lightweight aluminum alloy housing. Specifications: Specifications: Wheel Capacity:...... 4" Wheel Capacity: ...... 5" Spindle Type: ...... 3/8" - 24 Spindle Type: ...... 3/8" - 24 RPM - Approximate: ...... 11,000 RPM - Approximate: ...... 11,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety lever Exhaust: ...... Front right Exhaust: ...... Front right Weight:...... 4.0 lb / 1.8 kg Weight: ...... 4.3 lb / 1.8 kg Length: ...... 9.5 in / 24.1 cm Length: ...... 9.5 in / 24.1 cm Approximate Power: ...... 0.60 hp Approximate Power: ...... 0.60 hp Air Usage:...... 18 cfm Air Usage: ...... 18 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

INDUSTRIAL DUTY GENERAL DUTY ACCESSORIES 5008

8101 - Ergo Handle 7" Angle Grinder Features: l Governed motor. l Dramatically reduces vibration. l Aluminum alloy housing. l For models 5194EC, 5195EC and 5196EC. l Uses Type 27 wheels, abrasive discs. l Spiral bevel gear angle head for long tool life. l For cleaning, deburring, notching and grinding. Specifications: 8102 / 8103 - Quick Nut Wheel Capacity: ...... 7" Spindle Type: ...... 5/8" - 11 RPM - Approximate: ...... 7,000 Features: Throttle Type: ...... Push button with lever l Eliminates spanner . Exhaust: ...... Bottom l #8102 for 5/8"-11 spindle Weight: ...... 7.9 lb / 3.2 kg (5195EC & 5196EC). Length: ...... 13.5 in / 34.3 cm #8103 for 3/8"-24 spindle (5194EC). Approximate Power: ...... 1.10 hp Air Usage: ...... 34 cfm Air Inlet: ...... 3/4"

www.eagle-premier.com 11 GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5040 5040-6

7" Vertical Grinder 6" Vertical Grinder

l 3HP governed motor. l 3HP governed motor. l Durable cast housing. l Durable cast housing. l Safety throttle. l Safety throttle. l Also available l Also available in 6" and 9" guards. in 7" and 9" guards.

# 5040-6 = 5040 Tool w/6" Cup Guard # 5040-9 = 5040 Tool w/9" Cup Guard

Specifications: Specifications: Wheel Capacity: ...... 7" Wheel Capacity: ...... 6" Approximate Power: ...... 3.00 hp Approximate Power: ...... 3.00 hp RPM - Approximate: ...... 6,000 RPM - Approximate: ...... 6,000 Spindle Type: ...... 5/8"-11 Spindle Type: ...... 5/8"-11 Throttle Type: ...... Push button with lever Throttle Type: ...... Push button with lever Weight: ...... 7.7 lb / 3.5 kg Weight: ...... 7.7 lb / 3.5 kg Air Usage: ...... 49 cfm Air Usage: ...... 49 cfm Air Inlet: ...... 3/8" Air Inlet: ...... 3/8"

INDUSTRIAL DUTY 5040-9

9" Vertical Grinder

l 3HP governed motor. l Durable cast housing. l Safety throttle. l Also available in 6" and 7" guards.

Specifications: Wheel Capacity: ...... 9" Approximate Power: ...... 3.00 hp RPM - Approximate: ...... 6,000 Spindle Type: ...... 5/8"-11 Throttle Type: ...... Push button with lever Weight: ...... 7.7 lb / 3.5 kg Air Usage: ...... 49 cfm Air Inlet: ...... 3/8"

12 www.eagle-premier.com PERCUSSION TOOLS

51054100 GENERAL DUTY 4001 GENERAL DUTY Air Air Hammer l Positive action l Economical trigger controls speed. for fast cutting action. l Heavy duty spring retainer. l For muffler and pipe removal, l sold separately. body shop work, scraping rust, light front-end work. l For exhaust system, panel cutting, general repair work. l Includes 6" chisel with 1-3/8" angle blade. Specifications: Specifications: For Use With: ...... Chisel For Use With: ...... Chisel Chisel Shank ...... 0.401" Chisel Shank: ...... 0.401" Bore: ...... 0.75" Bore: ...... 0.75" Stroke: ...... 2.375" Stroke: ...... 2.625" BPM - Approximate: ...... 2,100 BPM - Approximate: ...... 3,500 Weight: ...... 3.3 lb / 1.5 kg Weight: ...... 3.8 lb / 1.7 kg Length: ...... 7.8 in / 19.8 cm Length: ...... 6.8 in / 17.1 cm Air Usage: ...... 10 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

4178 INDUSTRIAL DUTY 51054009 INDUSTRIAL DUTY Air 2" Chipping Hammer Hammer l Heavy duty l Drop forged handle. spring retainer. l Front exhaust. l Long lasting. l Oval collar. l For front end, exhaust, l For paint, scale, rust removal. frame, body work. l Chisel sold separately. l Chisel sold separately.

Specifications: Specifications: For Use With: ...... Chisel For Use With: ...... Chisel Chisel Shank: ...... 0.401" Chisel Shank: ...... 68 round or .58 hex bushing Bore: ...... 0.75" Bore: ...... 1.125" Stroke: ...... 3.625" Stroke: ...... 2.0" BPM - Approximate: ...... 2,100 BPM - Approximate: ...... 1,900 Weight: ...... 4.3 lb / 2.0 kg Weight: ...... 16.0 lb / 7.3 kg Length: ...... 8.5 in / 21.6 cm Length: ...... 15.5 in / 39.4 cm Air Usage: ...... 12 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/2"

www.eagle-premier.com 13 PERCUSSION TOOLS

4010 INDUSTRIAL DUTY 4615 INDUSTRIAL DUTY 3" Chipping Mini Needle Scaler Hammer Only 11.5 inches l Drop forged handle. l Straight handle long l Front exhaust. for hard to reach areas. l Oval collar. l 12-piece 3mm needle set included. l For paint, scale, rust removal. l For rust removal, weld slag, old paint. l Chisel sold separately.

Specifications: Specifications: For Use With: ...... Chisel For Use With: ...... Needles (9024 or 9043) Chisel Shank: ...... 68 round or .58 hex bushing Needle Diameter: ...... 12 @ 3 mm each Bore: ...... 1.125" Bore: ...... 1" Stroke: ...... 3.0" Stroke: ...... 2.375" BPM - Approximate: ...... 1,700 BPM - Approximate: ...... 4,000 Weight: ...... 17.8 lb / 8.1 kg Weight: ...... 2.8 lb / 1.3 kg Length: ...... 16.3 in / 41.3 cm Length: ...... 11.5 in / 29.2 cm Air Usage: ...... 12 cfm Air Usage: ...... 4 cfm Air Inlet: ...... 1/2" Air Inlet: ...... 1/4"

INDUSTRIAL DUTY 4620 INDUSTRIAL DUTY 4005 Needle Needle Scaler Scaler l Heavy-duty scaler l Hardened barrels and with pistol grip. strict tolerances l 28-piece 3mm for maximum life. needle set included. l For foundries, l For rust removal, weld slag, old paint. fabrication shops, ship building, and construction.

Specifications: Specifications: For Use With: ...... Needles (9024 or 9043) For Use With: ...... Needles (9024 or 9043) Needle Diameter: ...... 28 @ 3 mm each Needle Diameter: ...... 19 @ 3 mm each Bore: ...... 1" Bore: ...... 1" Stroke: ...... 2.375" Stroke: ...... 1.5" BPM - Approximate: ...... 4,500 BPM - Approximate: ...... 4,600 Weight: ...... 8.0 lb / 3.6 kg Weight: ...... 6.2 lb / 2.8 kg Length: ...... 13.8 in / 35.0 cm Length: ...... 18.0 in / 45.7 cm Air Usage: ...... 7 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

14 www.eagle-premier.com PERCUSSION TOOLS

51054004 INDUSTRIAL DUTY 4005SC INDUSTRIAL DUTY Flux Chipper Scaler/Chipper l Hardened barrels l Hardened barrels and strict tolerances and strict tolerances for maximum life. for maximum life. l For rust removal, weld slag, old paint. l For foundries, fabrication shops, ship building and construction. 9024

730224C Specifications: Specifications: For Use With: ...... Needles (9024) For Use With: ...... 7" Angle Chisel Needle Diameter: ...... 19 @ 3 mm each (730224C) For Use With: ...... 7" Angle Chisel (730224C) Chisel Diameter: ...... 0.401" Chisel Diameter: ...... 0.498" Bore: ...... 1" Bore: ...... 1" Stroke: ...... 1.5" Stroke: ...... 1.5" BPM - Approximate: ...... 4,600 BPM - Approximate: ...... 4,600 Weight: ...... 5.8 lb / 2.6 kg Weight: ...... 6.2 lb / 2.8 kg Length: ...... 9.8 in / 24.8 cm Length: ...... 18.0 in / 45.7 cm Air Usage: ...... 12 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

9024 / 9043

Replacement Needles

Part Number Length Diameter 9024 7 in / 17.5 cm 1/8 in / 3.18 mm 9043 5 in / 12.5 cm 1/8 in / 3.18 mm 9024 and 9043 are suitable for 4005, 4005SC, 4615 and 4620 Sold as individual needles, see tool set requirements.

www.eagle-premier.com 15 SPECIALTY TOOLS

51058116 INDUSTRIAL DUTY 8125 INDUSTRIAL DUTY Suction / Blow Gun Blow Gun

l Reversible l Inexpensive blow gun. nozzle ring l Oil and acid resistant plastic. creates portable l Long lever for precise control. vacuum cleaner. l 3 mm nozzle opening. l Acts as a blow gun l 95 mm nozzle length on reverse side. for difficult to reach places. l Includes two nozzles. l Safety slot - 30 PSI maximum l Comes with bag. at opening. Specifications: Specifications: Capacity: ...... 6.3 cfm Nozzle Opening: ...... 3 mm Tip Accessories: ...... 4 pieces Nozzle Length: ...... 95 mm Weight: ...... 1.0 lb / 0.4 kg Weight: ...... 0.2 lb / 0.1 kg Length: ...... 5.7 in / 14.4 cm Length: ...... 8.9 in /22.6 cm

16 www.eagle-premier.com WARRANTY INFORMATION

NEW TOOL AND ACCESSORY WARRANTY Any new tool or accessory branded with the Eagle name, and purchased from Eagle Group, Inc (EAGLE), or through one of its authorized distributors or agents, is warranted to the original buyer against defects in materials and workmanship for a period of one (1) year* from date of delivery. Under the terms of this warranty, EAGLE will repair or replace any product or accessory warranted hereunder and returned freight prepaid proving to EAGLE's satisfaction to be defective as a result of workmanship or materials. In order to qualify for this warranty, written notice to EAGLE must be given immediately upon discovery of such defect, at which time EAGLE will issue an authorization to return the tool. The defective item must be promptly returned to an authorized EAGLE service center with all freight charges prepaid.

REPAIRED TOOL WARRANTY Once a tool is beyond the new product warranty period, as detailed above, EAGLE will provide repair warranty on pneumatic tools for a period of 90 days* beyond the warrantied repair date.

EXCLUSION FROM WARRANTY This warranty is valid only on products purchased from EAGLE, or thru its authorized distributors or agents. EAGLE shall have no obligation pursuant to the EAGLE Warranty with respect to any tools or accessories which in EAGLE's sole judgment have been altered, damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer, or any other person other than an authorized representative of EAGLE, has made any attempt to service or modify the tool or accessory prior to its return to EAGLE under this Warranty.

The warranty provision with respect to each such product may be amended by EAGLE from time to time in its sole discretion. The liability of EAGLE hereunder shall be limited to replacing or repairing, at its option, any products which are returned freight prepaid to EAGLE and which EAGLE determines to be defective as described above or, at EAGLE's option, refunding the purchase price of such products.

EAGLE reserves the right to make periodic changes in construction or tool design at any time. EAGLE specifically reserves the right to make these changes without incurring any obligation or incorporating such changes or updates in tools or parts previously distributed.

THE EAGLE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND EAGLE EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SETS FORTH THE SOLE AND EXCLUSIVE REMEDY IN CONTRACT, TORT, STRICT LIABILITY, OR OTHERWISE.

THIS WARRANTY IS THE ONLY WARRANTY MADE BY EAGLE WITH RESPECT TO THE GOODS DELIVERED HEREUNDER, AND MAY BE MODIFIED OR AMENDED ONLY BY A WRITTEN INSTRUMENT SIGNED BY A DULY AUTHORIZED OFFICER OF EAGLE.

LIMITATION OF LIABILITY EAGLE'S LIABILITY PURSUANT TO WARRANTY OF THE PRODUCTS COVERED HEREUNDER IS LIMITED TO REFUND OF THE PURCHASE PRICE. IN NO EVENT SHALL EAGLE BE LIABLE FOR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS BY THE BUYER. IN NO EVENT SHALL EAGLE BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR OTHER DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT) WHETHER OR NOT EAGLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED, WHETHER FOR BREACH OR REPUDIATION OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE OR OTHERWISE. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST BUYER. THE ESSENTIAL PURPOSE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EAGLE ARISING OUT OF THIS AGREEMENT AND/OR SALE.

Note: The EAGLE Warranty confers specific legal rights, however some states or jurisdictions may not allow certain exclusions or limitations within this warranty.

* All warranty periods addressed herein are determined using a standard shift, eight-hour work day.

EAGLE Attn: Service Department 10000 SE Pine Street Portland, OR 97216 877.273.3903

www.eagle-premier.com 17 18 www.eagle-premier.com NOTES

www.eagle-premier.com 19 TM

Corporate Headquarters 10000 SE Pine St. Portland, OR 97216 www.eagle-premier.com Call Toll Free until 8pm EST Phone: (877) 273-3903 Fax: (800) 959-6601

AIMCO Corporation de Mexico SA de CV Ave. Cristobal Colon 14529 Chihuahua, Chihuahua. 31125 MEXICO

Toll Free : +52 (800) 801-1600 Direct : +52 (614) 380-1010 Fax : +52 (614) 380-1019

LIT-E390 Rev 9-14, Printed in USA, ©2014 AIMCO

Top View