www.EAGLE-PREMIER.com TM Abrasive Tools POWER TOOL SOLUTIONS Eagle Group is a leading supplier of power tools for industrial markets. Whether you need tools for material removal, finishing, maintenance, Impact Wrenches automotive, or assembly — Eagle Group has your solution.

Eagle Group has been a supplier of power tools for over 30 years throughout the United States, Mexico and South America. Drills Located in Portland, Oregon, Eagle resides in AIMCO’s corporate complex.

Percussion Tools

Fastening Tools

Cutting Tools

CALL TODAY TOLL FREE: Accessories 1-877-273-3903 TABLE OF CONTENTS

Grinders ...... 5 Die Grinders, Angle Grinders, Pencil Grinders, Die Grinder Kit, Vertical Grinders

Sanders ...... 15 Orbital Sanders, Jitterbug Sander, Angle Polisher, Angle Sander, Belt Sanders, Board Sander

Impact Wrenches ...... 21 Clutch Selection Information Chart, 3/8", 1/2", 3/4", 1", 1 1/2"

Ratchet Wrenches ...... 29 1/4", 3/8", 1/2" Ratchet Wrenches

Fastening Tools ...... 33 Clutch Selection Information, Stall Screwdrivers, Adjustable Clutch Screwdrivers, Positive Clutch Screwdrivers, Impact Screwdrivers, Torque Controlled Screwdrivers, AuditorTM Torque CubeTM Testers

Drills ...... 43 Pistol, Inline, Angle, Reversible, Non-reversible, 1/4", 3/8",1/2"

Percussion Tools ...... 49 Air Hammers, Chipping Hammers, Needle Scalers, Flux Chippers, Scaler/Chipper, Replacement Needles

Cutting / Specialty Tools ...... 53 Saw, Punch Tool, Cut-Off Tools, Blow Guns, Tire Buffers

Accessories ...... 57 Torque Wrenches, Balancers, Retractors, FRL, Lubricators, Regulators, Hoses, Air Fittings, Couplers, Bits and Sockets, Mag-O-Nets®

Reference Materials ...... 67 Conversion Charts, Warranty Information

3 THE PERQ DIFFERENCE

PERQ® is an industry standard formula that matches the needs of manufactures and service providers with the tools they use in their processes. Eagle Group and its distributors evaluate each process based on the Productivity, Ergonomics, Reliability and Quality (PERQ®) formula to determine the company’s unique blend of the PERQ® elements. Eagle Group then provides tooling that will enhance that mix. The end result is a production or maintenance process that runs efficiently, produces high quality products, and does so at the lowest possible cost. Combining PERQ® with Eagle Group's vast experience and unequalled service will enable the customer to succeed in the global marketplace. Each of the PERQ® elements acts as a gear – each interacts with the others to affect the overall profitability of the work process. Eagle Group looks at each step of the project to determine the best type of tool or equipment for that application. Only Eagle Group, with its extensive product lineup, can offer the customer the ideal tool for a specific job.

PRODUCTIVITY ERGONOMICS The speed and efficiency of the process The relationship between person and the process Every company wants to produce product, or complete a Employees are the most important assets of any job in the most cost-effective manner possible. Whether company. Protecting these individuals from job the customer is a manufacturer building several hundred related health issues is critical. To help its customers products daily, or a service company, repairing and face the challenges surrounding ergonomics, performing maintenance, Eagle Group provides products Eagle Group focuses on providing products that and services that allow each company to work at the ideal combine the latest ergonomic advances. These pace in order to keep its processes running efficiently. features allow employees to do their jobs in the safest possible manner and help companies avoid the hidden costs of workplace injuries.

ELIABILITY QUALITY TheR total cost of tool maintenance and repair The ability of the tool to adhere to process requirements To keep companies producing, tools must perform reliably. The most important challenge faced by most companies Eagle Group helps organizations face the challenges of is to meet its customer’s demands for quality. Eagle Group maintenance, repair and lost labor time by offering products provides tools that have been tested and proven to meet with superior workmanship and durability. By combining the most stringent engineering specifications. Eagle high quality products with a detailed and flexible service Group backs those tools with best in industry service training program, Eagle Group ensures its tools will meet and technical support. This allows companies to focus any customer’s expectations of reliability. on their most important goal—completing their projects efficiently and to the highest quality standards.

THE EAGLE GROUP DIFFERENCE l Tools designed to the needs of the user. l Varied Impact Mechanisms, Housing Designs and Materials l Tested and verified specification data - Torque Range Specs from a Three Second Trigger Pull (Impacts) - Maximum Torque Specs from a Five Second Trigger Pull (Impacts) l Industry Benchmark Test Equipment l Full Service and Support Capabilities

Don’t Settle for “Claims”… Trust in Tested Performance

4 www.eagle-premier.com POWER TOOL SOLUTIONS GRINDERS

Die Grinders ...... 6-11 Pencil Grinder ...... 11 Pistol Mini Die Grinder Kit ...... 11 Angle Grinders ...... 11-13 Vertical Grinder ...... 13-14

POWER TOOL SOLUTIONS™ GRINDERS

INDUSTRIAL DUTY 5I-06251 5I-10202 INDUSTRIAL DUTY

1/4" Die Grinder 1/4" Die Grinder

l Heavy duty steel housing. l All steel body construction. l Compact size. l Erickson collet precisely grips l Safety lockout throttle lever attachments for long-lasting, prevents accidental tool start. minimal runout. l Governed air motor for safe use and maximum power and speed under load.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 20,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.45 lb / .66 kg Weight: ...... 2.82 lb / 1.28kg Length: ...... 6.5 in / 16.5 cm Length: ...... 7.9 in / 20.06 cm Approximate Power: ...... p 0.60 h Approximate Power: ...... p 1.00 h Air Usage: ...... 19 cfm Air Usage: ...... 32 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 3/8"

INDUSTRIAL DUTY INDUSTRIAL DUTY 5I-04252 5I-06222

1/4" Composite Die Grinder 1/4" Composite Die Grinder

l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start. prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 22,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1 lb / 0.46 kg Weight: ...... 1.58 lb / 0.72 kg Length: ...... 7 in / 17.9 cm Length: ...... 7.8 in / 19.8 cm Approximate Power: ...... p 0.40 h Approximate Power: ...... p 0.60 h Air Usage: ...... 25 cfm Air Usage: ...... 30 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

6 www.eagle-premier.com GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5I-03302F 5I-03302

1/4" Die Grinder 1/4" Die Grinder l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start prevents accidental tool start. l Front exhaust. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 30,000 RPM - Approximate: ...... 30,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Front Exhaust: ...... Rear Weight: ...... 1 lb / .45 kg Weight: ...... 1 lb / .45 kg Length: ...... 6.5 in / 16.5 cm Length: ...... 6.5 in / 16.5 cm Approximate Power: ...... p 0.30 h Approximate Power: ...... p 0.30 h Air Usage: ...... 20 cfm Air Usage: ...... 20 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

51055200EC GENERAL DUTY 5201EC GENERAL DUTY 1/4" Composite Die Grinder 1/4" Composite Mini Die Grinder l Lightweight and durable. l Lightweight and durable. l Ergonomic composite housing l Ergonomic composite housing with a soft comfortable grip. with a soft comfortable grip. l For blending, smoothing l Good for light weld grinding, and sanding. polishing, and breaking l Less noise, vibration, sharp edges. and thermal transfer than l Less noise, vibration, and thermal aluminum tools. transfer than aluminum tools. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 22,000 RPM - Approximate: ...... 25,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.3 lb / 0.59 kg Weight: ...... 0.8 lb / 0.36 kg Length: ...... 6.75 in / 17.1 cm Length: ...... 6.25 in / 15.9 cm Approximate Power: ...... p 0.75 h Approximate Power: ...... p 0.50 h Air Usage: ...... 14 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 7 7 GRINDERS

5110 GENERAL DUTY 5002C GENERAL DUTY

1/4" Mini Die Grinder 1/4" Die Grinder

l Good for light weld l Compact and lightweight. grinding, polishing, and l All ball bearing construction. breaking sharp edges. l Rib textured handle provides l Air regulator allows firm grip. operator to control speed. l For blending, smoothing and porting. l 1/8" collet available. Part #32046-31-02 Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 22,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 0.8 lb / 0.4 kg Weight: ...... 1.2 lb / 0.5 kg Length: ...... 4.8 in / 12.2 cm Length: ...... 6.9 in / 17.5 cm Approximate Power: ...... p 0.38 h Approximate Power: ...... p 0.33 h Air Usage: ...... 14 cfm Air Usage: ...... 14 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

GENERAL DUTY GENERAL DUTY 5001 51055206EC 1/4" Composite Die Grinder, 1/4" Die Grinder 3" Extended l All steel housing. l Lightweight and durable. l Built-in regulator l Extended length for l 1/8" collet available. hard to reach areas. l Ergonomic composite housing with a soft comfortable grip. l For blending, smoothing and porting. l Less noise, vibration, and thermal transfer than aluminum tools. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 18,000 RPM - Approximate: ...... 25,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Lever Exhaust: ...... Front Exhaust: ...... Rear Weight: ...... 1.3 lb / 0.6 kg Weight: ...... 1.43 lb / 0.65 kg Length: ...... 6.5 in / 16.5 cm Length: ...... 9.25 in / 23.5 cm Approximate Power: ...... p 0.33 h Approximate Power: ...... 0.60 hp Air Usage: ...... 14 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

8 www.eagle-premier.com GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5I-04252X 5I-06202X 1/4" Composite Die Grinder, 1/4" Composite Die Grinder, 5" Extended 5" Extended l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start. prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 20,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.40 lb / 3.08 kg Weight: ...... 2.31 lb / 1.05 kg Length: ...... 12.2 in / 30.9 cm Length: ...... 13.03 in / 3.31 cm Approximate Power: ...... p 0.40 h Approximate Power: ...... p 0.60 h Air Usage: ...... 25 cfm Air Usage: ...... 30 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

5207EC GENERAL DUTY 5116 GENERAL DUTY 1/4" Composite Die Grinder, 1/4" Die Grinder, 5" Extended 6" Extended l Lightweight and durable l All ball bearing construction. l Extended length for l Extended length for hard to reach areas. hard-to-reach areas. l Ergonomic composite housing l Rib textured handle with a soft comfortable grip. provides firm grip. l For blending, smoothing and porting. l For blending, smoothing l Less noise, vibration, and thermal and porting. transfer than aluminum tools. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 25,000 RPM - Approximate: ...... 22,000 Throttle Type: ...... Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.45 lb / 0.66 kg Weight: ...... 2.75 lb / 1.2 kg Length: ...... 11.25 in / 28.6 cm Length: ...... 13 in / 30.5 cm Approximate Power: ...... p 0.60 h Approximate Power: ...... p 0.33 h Air Usage: ...... 12 cfm Air Usage: ...... 14 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 9 GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5A-04202 5A-04122 1/4" Composite Angle Die Grinder, 1/4" Composite Angle Die Grinder, 90o 90o l Lightweight design with smooth l Lightweight design with smooth performance. performance. l Erickson collet precisely grips l Erickson collet precisely grips attachments and result in minimal attachments and result in minimal runout. runout. l Safety lockout throttle lever l Safety lockout throttle lever prevents accidental tool start. prevents accidental tool start.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 12,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.3 lb / .59 kg Weight: ...... 1.3 lb / .59 kg Length: ...... 7.2 in / 18.2 cm Length: ...... 7.2 in / 18.2 cm Approximate Power: ...... p 0.40 h Approximate Power: ...... p 0.40 h Air Usage: ...... 19 cfm Air Usage: ...... 20 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

GENERAL DUTY 5202EC 5203EC GENERAL DUTY 1/4" Composite Angle Die Grinder, 1/4" Composite Angle Die Grinder, 90o 105o l Lightweight and durable. l Lightweight and durable. l Ergonomic composite housing l Ergonomic composite housing with a soft comfortable grip. with a soft comfortable grip. l Less noise, vibration, and thermal l Best for grinding and polishing transfer than aluminum tools. in hard to reach areas. l Right angle provides easy access. l Less noise, vibration, and thermal l For sanding, polishing, transfer than aluminum tools. deburring and porting. Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/4" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 20,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.1 lb / 0.55 kg Weight: ...... 1.1 lb / 0.55 kg Length: ...... 6.25 in / 15.9 cm Length: ...... 6.25 in / 15.9 cm Approximate Power: ...... p 0.60 h Approximate Power: ...... p 0.60 h Air Usage: ...... 12 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

10 www.eagle-premier.com GRINDERS

GENERAL DUTY 5003C 5000 GENERAL DUTY

1/4" Angle Die Grinder Pencil Grinder l Compact lightweight design. l Excellent for blending / finishing work. l Ball bearing construction. l High speed precision. l For sanding, deburring l Complete with air hose, and polishing. exhaust hose, and integral silencer. l Right angle provides easy access.

Specifications: Specifications: Collet Size: ...... 1/4" Collet Size: ...... 1/8" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 54,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Twist Exhaust: ...... Rear Exhaust: ...... Rear Hose Weight: ...... 1.0 lb / 0.5 kg Weight: ...... 0.6 lb / 0.3 kg Length: ...... 6.3 in / 15.9 cm Length: ...... 5.3 in / 13.3 cm Approximate Power: ...... p 0.33 h Approximate Power: ...... p 0.10 h Air Usage: ...... 14 cfm Air Usage: ...... 6 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

5102K INDUSTRIAL DUTY 5205-2EC GENERAL DUTY Pistol Mini 3" Angle Grinder, 105o Die Grinder Kit l Complete with: l Ergonomic and safe use design. - 1/8" & 1/4" collet l 105° angled head design - 5 ea. 1/8" grinding stones for improved sight lines - 5 ea. 1/4" grinding stones and spark angle. l Convenient speed regulator, l Tight access use. direct drive, no angle gears, and l 1/16" to 1/4" wheel capability. an ergonomic design for operator comfort and control.

Specifications: Specifications: Collet Size: ...... 1/8" & 1/4" Collet Size: ...... 3" RPM - Approximate: ...... 15,000 RPM - Approximate: ...... 15,000 Throttle Type: ...... Trigger Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 1.5 lb / 0.7 kg Weight: ...... 1.5 lb / 0.68 kg Length: ...... 3.5 in / 8.9 cm Length: ...... 8.25 in / 21 cm Approximate Power: ...... p 0.38 h Approximate Power: ...... p 0.60 h Air Usage: ...... 4 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 11 GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5104 5105 4" Angle Grinder 5" Angle Grinder

l All steel l All steel internal parts. internal parts. l Four step heat l Four step treat process. heat treat process. l Sandcast housing. l Sandcast housing. l Uses Type 27 wheels and l Uses Type 27 wheels abrasive discs. and abrasive discs.

Specifications: Specifications: Wheel Capacity: ...... 4" Wheel Capacity: ...... 5" Spindle Type: ...... 3/8" - 24 Spindle Type: ...... 5/8" - 11 RPM - Approximate: ...... 13,500 RPM - Approximate: ...... 10,800 Throttle Type: ...... Push button with lever Throttle Type: ...... Push button with lever Exhaust: ...... Front right Exhaust: ...... Front right Weight: ...... 4.4 lb / 2.0 kg Weight:...... 4.4 lb / 2.0 kg Length: ...... 8.3 in / 21.1 cm Length: ...... 8.3 in / 21.1 cm Approximate Power: ...... p 1.00 h Approximate Power: ...... p 1.00 h Air Usage: ...... 34 cfm Air Usage:...... 34 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

INDUSTRIAL DUTY 5195EC INDUSTRIAL DUTY 5194EC 5196EC 4" Composite Angle Grinder 4.5" / 5" Composite Angle Grinder l Swivel guard adjustable l Swivel guard adjustable in nine steps. in nine steps. l Composite body, l Composite body, spindle lock, rear exhaust, spindle lock, rear exhaust, quiet operation. quiet operation. l Reversible side handle. l Reversible side handle. l Governed motor. l Governed motor. l 5195EC: 4.5" 5196EC: 5" Specifications: Specifications: Adjustable in nine steps Adjustable in nine steps Spindle: ...... 3/8" - 24 Spindle: ...... 5/8" - 11 RPM - Approximate: ...... 12,000 RPM - Approximate: ...... 12,000 Throttle Type: ...... Lever Throttle Type: ...... Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 3.80 lb / 1.72 kg Weight: ...... 3.8 lb / 1.72 kg Length: ...... 9.6 in / 24.4 cm Length: ...... 9.6 in / 24.4 cm Approximate Power: ...... p 1.30 h Approximate Power: ...... 1.30 hp Air Usage: ...... 25 cfm Air Usage: ...... 25 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" P/N # 5194EC KIT with #8101 and #8103 P/N # 5195EC KIT / 5196EC KIT with #8101 and #8102

12 www.eagle-premier.com GRINDERS

GENERAL DUTY GENERAL DUTY 5006 5007

4" Angle Grinder 5" Angle Grinder l Governed motor. l Governed motor. l 5/8" - 11 l 5/8" - 11 adapter included. adapter included. l Uses Type 27 wheels, l Uses Type 27 wheels, abrasive discs. abrasive discs. l Spiral bevel gearing for extended life, low vibration. l Spiral bevel gearing for extended life, low vibration. l For weld prep, smoothing, rust removal and deburring. l For weld prep, smoothing, rust removal, deburring. l Lightweight aluminum alloy housing. l Rugged lightweight aluminum alloy housing. Specifications: Specifications: Wheel Capacity:...... 4" Wheel Capacity: ...... 5" Spindle Type: ...... 3/8" - 24 Spindle Type: ...... 3/8" - 24 RPM - Approximate: ...... 11,000 RPM - Approximate: ...... 11,000 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety lever Exhaust: ...... Front right Exhaust: ...... Front right Weight:...... 4.0 lb / 1.8 kg Weight: ...... 4.3 lb / 1.8 kg Length: ...... 9.5 in / 24.1 cm Length: ...... 9.5 in / 24.1 cm Approximate Power: ...... p 0.60 h Approximate Power: ...... p 0.60 h Air Usage:...... 18 cfm Air Usage: ...... 18 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

INDUSTRIAL DUTY GENERAL DUTY ACCESSORIES 5008

8101 - Ergo Handle 7" Angle Grinder Features: l Governed motor. l Dramatically reduces vibration. l Aluminum alloy housing. l For models 5194EC, 5195EC and 5196EC. l Uses Type 27 wheels, abrasive discs. l Spiral bevel gear angle head for long tool life. l For cleaning, deburring, notching and grinding. Specifications: 8102 / 8103 - Quick Nut Wheel Capacity: ...... 7" Spindle Type: ...... 5/8" - 11 RPM - Approximate: ...... 7,000 Features: Throttle Type: ...... Push button with lever l Eliminates spanner wrench. Exhaust: ...... Bottom l #8102 for 5/8"-11 spindle Weight: ...... 7.9 lb / 3.2 kg (5195EC & 5196EC). Length: ...... 13.5 in / 34.3 cm #8103 for 3/8"-24 spindle (5194EC). Approximate Power: ...... p 1.10 h Air Usage: ...... 34 cfm Air Inlet: ...... 3/4"

www.eagle-premier.com 13 GRINDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 5040 5040-6

7" Vertical Grinder 6" Vertical Grinder

l 3HP governed motor. l 3HP governed motor. l Durable cast housing. l Durable cast housing. l Safety throttle. l Safety throttle. l Also available l Also available in 6" and 9" guards. in 7" and 9" guards.

# 5040-6 = 5040 Tool w/6" Cup Guard # 5040-9 = 5040 Tool w/9" Cup Guard

Specifications: Specifications: Wheel Capacity: ...... 7" Wheel Capacity: ...... 6" Approximate Power: ...... 3.00 hp Approximate Power: ...... 3.00 hp RPM - Approximate: ...... 6,000 RPM - Approximate: ...... 6,000 Spindle Type: ...... 5/8"-11 Spindle Type: ...... 5/8"-11 Throttle Type: ...... Push button with lever Throttle Type: ...... Push button with lever Weight: ...... 7.7 lb / 3.5 kg Weight: ...... 7.7 lb / 3.5 kg Air Usage: ...... 49 cfm Air Usage: ...... 49 cfm Air Inlet: ...... 3/8" Air Inlet: ...... 3/8"

INDUSTRIAL DUTY 5040-9

9" Vertical Grinder

l 3HP governed motor. l Durable cast housing. l Safety throttle. l Also available in 6" and 7" guards.

Specifications: Wheel Capacity: ...... 9" Approximate Power: ...... 3.00 hp RPM - Approximate: ...... 6,000 Spindle Type: ...... 5/8"-11 Throttle Type: ...... Push button with lever Weight: ...... 7.7 lb / 3.5 kg Air Usage: ...... 49 cfm Air Inlet: ...... 3/8"

14 www.eagle-premier.com POWER TOOL SOLUTIONS SANDERS

Angle Sanders ...... 16 Orbital Sanders ...... 16-17 Jitterbug Sander / Angle Polisher / Sander ...... 17-18 Belt Sanders / Board Sander ...... 18-19

POWER TOOL SOLUTIONS™ SANDERS

INDUSTRIAL DUTY INDUSTRIAL DUTY 6115EC 6133EC 2" Angle Orbital Composite Sander, 2" Composite Angle Sander, 105o 90o l Lightweight and durable. l Lightweight and durable. l Pad Size: 2" Diameter, l Ergonomic composite housing M6 x 1.0 thread, with a soft comfortable grip. yellow polyurethane foam pad, l Less noise, vibration, and thermal hooked Velcro face. transfer than aluminum tools. l Orbital Capacity: 0.2" / 3.0 mm l Roll lock abrasive holder.

Specifications: Specifications: Pad Size: ...... 2" diameter Sanding Disc: ...... 2" RPM - Approximate: ...... 15,000 Pad Size: ...... 1.75" diameter Spindle: ...... 1/4" - 20 RPM - Approximate: ...... 15,000 Weight: ...... 1.36 lb / 0.62 kg Spindle: ...... 1/4" - 20 Length: ...... 6.75 in / 17.1 cm Weight: ...... 1.05 lb / 0.48 kg Air Usage: ...... 12 cfm Length: ...... 6.75 in / 17.1 cm Air Inlet: ...... 1/4" Air Usage: ...... 12 cfm Air Inlet: ...... 1/4"

INDUSTRIAL DUTY INDUSTRIAL DUTY 6134EC 51056905EC 2" Composite Angle Sander, 5" Composite Random 105o Orbital Sander l Lightweight and durable. l Vibration absorbing grip. l Ergonomic composite housing l High power and lightweight. with a soft comfortable grip. l PSA pad type l Less noise, vibration, and thermal l Orbital action assures transfer than aluminum tools. swirl-free finish. l Roll lock abrasive holder. l For touch-up, feather-edging, sanding, pre-paint preparation.

Specifications: Specifications: Sanding Disc: ...... 2" Pad Size: ...... 5" Pad Size: ...... 1.75" diameter RPM - Approximate: ...... 12,000 RPM - Approximate: ...... 15,000 Orbit: ...... 3/16" pattern Weight: ...... 1.05 lb / 0.48 kg Weight: ...... 2.0 lb / 0.9 kg Length: ...... 6.75 in / 17.1 cm Length: ...... 6.9 in / 17.5 cm Air Usage: ...... 12 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4

16 www.eagle-premier.com SANDERS

6906EC INDUSTRIAL DUTY 6005 GENERAL DUTY 6" Composite Random 6" Dual Action Orbital Sander Orbital Sander l Vibration absorbing grip. l Dual action. l High power and lightweight. l Built-in regulator l PSA pad type l Insulated grip. l Orbital action l Lightweight assures swirl-free finish. all aluminum l For touch-up, feather-edging, body construction. sanding, pre-paint preparation. l For touch-up, feather-edging, sanding, pre-paint preparation. Specifications: Specifications: Pad Size: ...... 6" Pad Size: ...... 6" RPM - Approximate: ...... 12,000 RPM - Approximate: ...... 10,000 Orbit: ...... 3/16" pattern Orbit: ...... 5/16" pattern Weight: ...... 2.0 lb / 0.9 kg Weight: ...... 5.2 lb / 2.1 kg Length: ...... 6.9 in / 17.5 cm Length: ...... 12.0 in / 30.5 cm Air Usage: ...... 15 cfm Air Usage: ...... 16 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

6009 GENERAL DUTY 6113 GENERAL DUTY 3" - 5" Jitterbug Sander High Speed Sander l Durable construction. l Lightweight, l For wet compact design. and dry sanding. l Includes 3" & 5" backing pads. l For wood, metal l Built-in regulator or plastic finishing, to control speed. and fiberglass. l For paint removal, shaping filler patches, weld smoothing, rust removal. Specifications: Specifications: Pad Size: ...... 3.5 x 7.75 in / 89 x 197 mm Pad Size: ...... 3" & 5" RPM - Approximate: ...... 8,000 RPM - Approximate: ...... 18,000 Weight: ...... 4.3 lb / 2.0 kg Spindle: ...... 3/8" Length: ...... 8.0 in / 20.3 cm Weight: ...... 2.4 lb /1.1 kg Air Usage: ...... 15 cfm Length: ...... 4.6 in / 11.7 cm Air Inlet: ...... 1/4" Air Usage: ...... 19 cfm Air Inlet: ...... 1/4"

www.eagle-premier.com 17 SANDERS

6507 GENERAL DUTY 6012 GENERAL DUTY

7" Angle Polisher 7" Angle Sander

l Built-in l Powerful power regulator. 1 hp motor. l Dead handle l Dead handle for easy control. mounts either side. l Ideal for buffing l Hardened and ground and polishing spiral bevel gears for long life. paint and metal l For heavy rust removal, sanding to a professional finish. and shaping of filler patches. Specifications: Specifications: Pad Size: ...... 7" Pad Size: ...... 7" RPM - Approximate: ...... 2,500 RPM - Approximate: ...... 4,500 Weight: ...... 6.5 lb / 2.9 kg Approximate Power: ...... 1.00 hp Length: ...... 18.0 in / 45.7 cm Weight: ...... 6.0 lb /2.7 kg Air Usage: ...... 12 cfm Length: ...... 15 in / 38.1 cm Air Inlet: ...... 1/4" Air Usage: ...... 19 cfm Air Inlet: ...... 1/4"

GENERAL DUTY 6114 GENERAL DUTY 6115

3/8" x 13" Belt Sander 1/2" x 24" Belt Sander

l Best for sanding confined l Best for sanding confined areas and curved surfaces. areas and curved surfaces. l Adjustable sanding belt l Adjustable sanding belt rotates to allow easy handling. rotates to allow easy handling. l Quick change l Quick change belt replacement system. belt replacement system.

Specifications: Specifications: Belt Size: ...... 3/8 x 13 in / 10 x 305 mm Belt Size: ...... 1/2 x 24 in / 13 x 610 mm RPM - Approximate: ...... 16,000 RPM - Approximate: ...... 16,000 Approximate Power: ...... 0.33 hp Approximate Power: ...... 0.33 hp Weight: ...... 1.7 lb / 0.8 kg Weight: ...... 1.7 lb / 0.8 kg Length: ...... 10.5 in / 26.7 cm Length: ...... 23.5 in / 59.7 cm Air Usage: ...... 14 cfm Air Usage: ...... 14 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

18 www.eagle-premier.com SANDERS

6116 GENERAL DUTY 6017 GENERAL DUTY Two Piston 3/4" x 20.5" Belt Sander Board Sander l Best for sanding confined l Two handle design. areas and curved surfaces. l Smooth feathers; l Adjustable sanding belt dual pistons provide rotates to allow easy handling. efficient power and l Quick change prevent stalling. belt replacement system. l For all types of surface preparation and rapid removal of material from large areas.

Specifications: Specifications: Belt Size: ...... 3/4 x 20.5 in / 20 x 520 mm Pad Size: ...... 2.5 x 15.75 in / 63 x 400 mm RPM - Approximate: ...... 16,000 RPM - Approximate: ...... 3,300 Approximate Power: ...... 0.40 hp Approximate Power: ...... 0.75 hp Weight: ...... 3.1 lb / 1.4 kg Weight: ...... 6.87 lb /3.0 kg Length: ...... 11.9 in / 30.2 cm Length: ...... 16.0 in / 40.6 cm Air Usage: ...... 18 cfm Air Usage: ...... 9 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 19 NOTES

20 www.eagle-premier.com POWER TOOL SOLUTIONS IMPACT WRENCHES

Clutch Information Chart ...... 22 3/8" Impact Wrenches ...... 23 1/2" Impact Wrenches ...... 24-25 3/4" Impact Wrenches ...... 26 1" Impact Wrenches ...... 27-28 1 1/2" Impact Wrench ...... 28

POWER TOOL SOLUTIONS™ IMPACT WRENCH TYPES

2450 1" Impact Wrench Clutch Page 28 Information Chart

TOOL TYPE: USES:

Single Hammer l l Delivers high Standard assembly torque-to-weight ratio. l Automotive repair l Light industrial use

Twin Hammer

l l Reliable system Industrial producing torque maintenance quickly with two l Tire service forged hammers.

Pin Clutch l Maintenance l Rapid delivery of torque. l l High power-to-weight ratio. Light assembly l Hard joints

Swing Hammer Clutch l Standard assembly l Rapid delivery of torque. l Simple, effective design. applications l Maintenance l Hard joints

22 IMPACT WRENCHES

INDUSTRIAL DUTY 2010 GENERAL DUTY 51052163EC 3/8" Butterfly Inline 3/8" Impact Wrench Impact Wrench l Single hammer design. l Composite housing. l Air inlet swivels 360o l Twin hammer design. for easy maneuvering. l Swivel air inlet fitting. l For bench work, carburetors, ignitions, l Large easy-to-use body panels, transmissions, fender forward reverse switch. struts, oil pans, and small engine work. l Bottom grease fitting. l Butterfly throttle allows one hand directional changes.

Specifications: Specifications: Drive Size: ...... 3/8" Drive Size: ...... 3/8" RPM - Approximate: ...... 10,000 RPM - Approximate: ...... 10,400 Torque Range - Approximate: .... 11- 75 ft-lb / 15 -102 Nm Torque Range - Approximate: .... 131 - 189 ft-lb / 178 - 256 Nm Max Torque: ...... 92 ft-lb / 125 Nm Max Torque: ...... 220 ft-lb / 298 Nm Weight: ...... 2.8 lb / 1.3 kg Weight: ...... 2.7 lb / 1.2 kg Length: ...... 6.4 in / 16.3 cm Length: ...... 6.5 in / 16.5 cm Air Usage: ...... 13 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" l Approximate Working Torque - 75 ft-lb l Approximate Working Torque - 189 ft-lb

INDUSTRIAL DUTY 2150 INDUSTRIAL DUTY 2120 3/8" 3/8" Impact Wrench Impact Wrench l Twin hammer design l Composite and l Steel clutch housing lightweight housing. protects hammer mechanism l Twin hammer design. l Fast cycle times l Swivel air inlet fitting. l Long life l Unique motor set design l For general industrial use eliminates power loss. l Noise reducing exhaust design for quiet operation. Specifications: Specifications: Drive Size: ...... 3/8" Drive Size: ...... 3/8" RPM - Approximate: ...... 10,000 RPM - Approximate: ...... 8,000 Torque Range - Approximate: .... 100 - 145 ft-lb / 136 - 197 Nm Torque Range - Approximate: .... 50 - 292 ft-lb / 70- 395 Nm Max Torque: ...... 199 ft-lb / 270 Nm Max Torque: ...... 300 ft-lb / 405 Nm Weight: ...... 3.3 lb / 1.5 kg Weight: ...... 2.9 lb / 1.3 kg Length: ...... 6.0 in / 15.2 cm Length: ...... 6.5 in / 16.5 cm Air Usage: ...... 13 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" l Approximate Working Torque - 145 ft-lb l Approximate Working Torque - 292 ft-lb

www.eagle-premier.com 23 IMPACT WRENCHES

2225 GENERAL DUTY 2260 GENERAL DUTY 2225L 2260L 1/2" Impact Wrench 1/2" Impact Wrench

l Metal housing for durability. l Engineered for the after- l Twin hammer design. market automotive industry. l l Compact size for tight access. Pin clutch design to quickly deliver torque. l Handle exit exhaust. l 2260 with standard anvil l 2225 with standard anvil. l 2260L with 2-1/2" l 2225L with extended extended anvil length anvil.

Specifications: Specifications: Drive Size: ...... 1/2" Drive Size: ...... 1/2" RPM - Approximate: ...... 8,000 RPM - Approximate: ...... 7,500 Torque Range - Approximate: .... 190 - 328 ft-lb / 257- 445 Nm Torque Range - Approximate: .... 114 - 260 ft-lb / 154 - 352 Nm Max Torque: ...... 365 ft-lb / 495 Nm Max Torque: ...... 302 ft-lb / 409 Nm Weight: ...... 5.6 lb / 2.5 kg Weight: ...... 6.15 lb / 2.8 kg Length: ...... 7.25 in / 18.4 cm Length: ...... 7.5 in / 19.4 cm Air Usage: ...... 15 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

l Approximate Working Torque - 328 ft-lb l Approximate Working Torque - 260 ft-lb

INDUSTRIAL DUTY INDUSTRIAL DUTY 2256 2125PEC 1/2" 1/2" Composite Impact Impact Wrench Wrench, Pin Type Anvil l Twin hammer design. l Composite and l Handle exhaust lightweight housing. directs air away. l Twin hammer design. l Steel Casing l Swivel air inlet fitting. l Unique motor set design eliminates power loss. l Noise reducing exhaust design for quiet operation. Specifications: Specifications: Drive Size: ...... 1/2" Drive Size: ...... 1/2" RPM - Approximate: ...... 7,000 RPM - Approximate: ...... 10,000 Torque Range - Approximate: .... 240 - 395 ft-lb / 325 - 535 Nm Torque Range - Approximate: .... 50 - 292 ft-lb / 70- 395 Nm Max Torque: ...... 425 ft-lb / 575 Nm Max Torque: ...... 300 ft-lb / 405 Nm Weight: ...... 5.8 lb / 2.6 kg Weight: ...... 2.9 lb / 1.3 kg Length: ...... 7.5 in / 19.0 cm Length: ...... 6.5 in / 16.5 cm Air Usage: ...... 15 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" l Approximate Working Torque - 395 ft-lb l Approximate Working Torque - 292 ft-lb

24 www.eagle-premier.com IMPACT WRENCHES

2240 INDUSTRIAL DUTY INDUSTRIAL DUTY 2240PEC 2258EC 1/2" Composite 1/2" Composite Impact Wrench Impact Wrench l Composite and l Composite housing. lightweight housing. l Twin hammer design. l Twin hammer design. l Swivel air inlet fitting. l Swivel air inlet fitting. l Large easy-to-use l Unique motor set design forward reverse switch. eliminates power loss. l Same as 2163EC l Noise reducing exhaust with 1/2" square drive. 2240PEC design for quiet operation. Pinned Anvil Specifications: Specifications: Drive Size: ...... 1/2" Drive Size: ...... 1/2" RPM - Approximate: ...... 8,000 RPM - Approximate: ...... 10,400 Torque Range - Approximate: .... 100 - 410 ft-lb / 135- 550 Nm Torque Range - Approximate: .... 131 - 189 ft-lb / 178 - 256 Nm Max Torque: ...... 450 ft-lb / 600 Nm Max Torque: ...... 220 ft-lb / 298 Nm Weight: ...... 4.9 lb / 2.3 kg Weight: ...... 2.7 lb / 1.2 kg Length: ...... 8.3 in / 20.8 cm Length: ...... 6.5 in / 16.5 cm Air Usage: ...... 18 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" l Approximate Working Torque - 189 ft-lb l Approximate Working Torque - 410 ft-lb

2263EC5105 INDUSTRIAL DUTY 2377 INDUSTRIAL DUTY 1/2" Composite 3/4" Impact Wrench Impact Wrench l Twin hammer design. l Composite housing. l Swivel air inlet fitting. l Twin hammer design. l Large easy-to-use l Handle exhaust directs air away. forward reverse switch. l Feathering trigger for ultimate control. l Bottom grease fitting.

Specifications: Specifications: Drive Size: ...... 1/2" Drive Size: ...... 3/4" RPM - Approximate: ...... 7,800 RPM - Approximate: ...... 5,000 Torque Range - Approximate: .... 210 - 295 ft-lb / 284 - 400 Nm Torque Range - Approximate: .... 230- 1,065 ft-lb / 310- 1,450 Nm Max Torque: ...... 333 ft-lb / 452 Nm Max Torque: ...... 1,250 ft-lb / 1, 695 Nm Weight: ...... 4.5 lb / 2.0 kg Weight: ...... 8.05 lb / 3.6 kg Length: ...... 8.2 in / 20.8 cm Length: ...... 8.75 in / 22.2 cm Air Usage: ...... 19 cfm Air Usage: ...... 19 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/2" l Approximate Working Torque - 295 ft-lb l Approximate Working Torque - 1,065 ft-lb

www.eagle-premier.com 25 IMPACT WRENCHES

INDUSTRIAL DUTY 2375EC INDUSTRIAL DUTY 51052380 3/4" Composite Impact 3/4" Composite Impact Wrench Wrench l Composite housing. l Compact composite l Twin hammer design. housing. l l Swivel air inlet fitting. Swing hammer design. l l Large easy-to-use Optimal power-to-weight ratio. forward reverse switch. l Most powerful tool in its class. l Bottom grease fitting. l Handle exhaust directs air away.

Specifications: Specifications: Drive Size: ...... 3/4" Drive Size: ...... 3/4" RPM - Approximate: ...... 5,500 RPM - Approximate: ...... 4,000 Torque Range - Approximate: .... 915 - 1,290 ft-lb / 1,243 - 1,750 Nm Torque Range - Approximate: .... 125 - 1,450 ft-lb / 170- 1,975 Nm Max Torque: ...... 1,540 ft-lb / 2, 090 Nm Max Torque: ...... 1,875 ft-lb / 2, 540 Nm Weight: ...... 7.8 lb / 3.5 kg Weight: ...... 12.4 lb / 5.6 kg Length: ...... 9.4 in / 24 cm Length: ...... 11.75 in / 29.8 cm Air Usage: ...... 27 cfm Air Usage: ...... 19.4 cfm Air Inlet: ...... 3/8" Air Inlet: ...... 1/2" l l Approximate Working Torque - 1,290 ft-lb Approximate Working Torque - 1,450 ft-lb

GENERAL DUTY 20045105 24805105 INDUSTRIAL DUTY 3/4" Impact Wrench 1" Composite Impact Wrench l Single hammer design. l Compact, composite l Built-in regulator. housing. l Available with extended anvil. l Swing hammer design. l Optimal power-to-weight ratio. l Most powerful tool in its class. l Handle exhaust directs air away.

Specifications: Specifications: Drive Size: ...... 3/4" Drive Size: ...... 1" RPM - Approximate: ...... 5,000 RPM - Approximate: ...... 4,000 Torque Range - Approximate: .... 145 - 500 ft-lb / 196 - 746 Nm Torque Range - Approximate: .... 125 - 1,450 ft-lb / 170- 1,975 Nm Max Torque: ...... 600 ft-lb / 815 Nm Max Torque: ...... 1,875 ft-lb / 2, 540 Nm Weight: ...... 10.5 lb / 4.8 kg Weight: ...... 12.4 lb / 5.6 kg Length: ...... 9.5 in / 24.1 cm Length: ...... 11.75 in / 29.8 cm Air Usage: ...... 28 cfm Air Usage: ...... 19.4 cfm Air Inlet: ...... 3/8" Air Inlet: ...... 1/2"

l Approximate Working Torque - 550 ft-lb l Approximate Working Torque - 1,450 ft-lb

26 www.eagle-premier.com IMPACT WRENCHES

INDUSTRIAL DUTY 2485L INDUSTRIAL DUTY 2463 1" Inline Impact 1" Impact Wrench Wrench, Extended Extended l l Swing hammer clutch Twin hammer design. design for low vibration. l Steel clutch housing protects l Extended anvil for optimal hammer mechanism. access on deep wheels l For tire changing on and applications. trucks and buses.

Specifications: Specifications: Drive Size: ...... 1" Drive Size: ...... 1" RPM - Approximate: ...... 4,000 RPM - Approximate: ...... 3,900 Torque Range - Approximate: .... 833 - 1,875 ft-lb / 1,130- 2,542 Nm Torque Range - Approximate: .... 670 - 1,300 ft-lb / 908 - 1,760 Nm Max Torque: ...... 2,290 ft-lb / 3,100 Nm Max Torque: ...... 1,600 ft-lb / 2,169 Nm Weight: ...... 28 lb / 12.7 kg Weight: ...... 20.2 lb / 9.0 kg Length: ...... 19 in / 48.2 cm Length: ...... 22.0 in / 55.9 cm Air Usage: ...... 30 cfm Air Usage: ...... 26 cfm Air Inlet: ...... 1/2" Air Inlet: ...... 1/2" l l Approximate Working Torque - 1,875 ft-lb Approximate Working Torque - 1,300 ft-lb

2403L INDUSTRIAL DUTY 2450 INDUSTRIAL DUTY 2450L 1" Inline Impact 1" Inline Impact Wrench, Extended Wrench l Composite housing l Twin hammer design. reduces weight. l Smooth power l Extended Anvil. in a compact, lightweight l Twin hammer design. design. l Swivel exhaust. l 2450 with standard 3" anvil. l 2450L with 6" extended anvil.

Specifications: Specifications: Drive Size: ...... 1" Drive Size: ...... 1" RPM - Approximate: ...... 4,000 RPM - Approximate: ...... 6,000 Torque Range - Approximate: .... 1,250 - 1,875 ft-lb / 1,695- 2,550 Nm Torque Range - Approximate: .... 940 - 1,450 ft-lb / 1,274 - 1,965 Nm Max Torque: ...... 2,000 ft-lb / 2,825 Nm Max Torque: ...... 1,600 ft-lb / 2,169 Nm Weight: ...... 21.3 lb / 9.7 kg Weight: ...... 19 lb / 8.5 kg Length: ...... 23 in / 58.4 cm Length: ...... 19.5 in / 49.5 cm Air Usage: ...... 25 cfm Air Usage: ...... 26 cfm Air Inlet: ...... 1/2" Air Inlet: ...... 1/2" l Approximate Working Torque - 1,875 ft-lb l Approximate Working Torque - 1,450 ft-lb

www.eagle-premier.com 27 IMPACT WRENCHES

INDUSTRIAL DUTY 51052453 51052550 INDUSTRIAL DUTY 1" Impact Wrench 1 1/2" Inline Impact Wrench l Twin hammer design. l Efficient power l Steel clutch housing protects to weight ratio. hammer mechanism. l Swing hammer clutch. l For off-road equipment repair, heavy equipment, MRO.

Specifications: Specifications: Drive Size: ...... 1" Drive Size: ...... 1 1/2" RPM - Approximate: ...... 3,900 RPM - Approximate: ...... 2,500 Torque Range - Approximate: .... 670 - 1,300 ft-lb / 908 - 1,760 Nm Torque Range - Approximate: .... 2,100 - 3,200 ft-lb / 2,847 - 4,338 Nm Max Torque: ...... 1,600 ft-lb / 2,170 Nm Max Torque: ...... 3,500 ft-lb /4,745 Nm Weight: ...... 20.3 lb / 9.2 kg Weight: ...... 50 lb / 23 kg Length: ...... 15.3 in / 38.8 cm Length: ...... 20 in / 50.8 cm Air Usage: ...... 26 cfm Air Usage: ...... 75 cfm Air Inlet: ...... 1/2" Air Inlet: ...... 1/2" l Approximate Working Torque - 1,300 ft-lb l Approximate Working Torque - 3,200 ft-lb

28 www.eagle-premier.com POWER TOOL SOLUTIONS RATCHET WRENCHES

Ratchet Wrenches ...... 30-31

POWER TOOL SOLUTIONS™ RATCHET WRENCHES

51053115 GENERAL DUTY 3100 GENERAL DUTY 1/4" Ratchet Wrench 3/8" Ratchet Wrench

l Rear exhaust with silencer. l Ball & needle bearing l Extended ratchet housing construction for long life. for greater reach. l Internal ring gear with l For smaller fasteners. three planetary gears.

Specifications: Specifications: Drive Size: ...... 1/4" Drive Size: ...... 3/8" RPM - Approximate: ...... 230 RPM - Approximate: ...... 160 Torque - Approximate: ...... 18 ft-lb / 24 Nm Torque - Approximate: ...... 24 ft-lb / 33 Nm Weight: ...... 1.4 lb / 0.6 kg Weight: ...... 2.6 lb / 1.2 kg Length: ...... 8.0 in / 20.3 cm Length: ...... 10.5 in / 26.7 cm Air Usage: ...... 10 cfm Air Usage: ...... 16 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

l Approximate Working Torque - 18 ft-lb l Approximate Working Torque - 24 ft-lb

GENERAL DUTY 3105 3205 GENERAL DUTY

1/2" Ratchet Wrench 3/8" Ratchet Wrench

l Excellent for l Composite grip general purpose use. for increased operator comfort. l Improved gear l Built-in grease fitting head extends life. for lubrication ease. l Power for tough jobs.

Specifications: Specifications: Drive Size:...... 1/2" Drive Size: ...... 3/8" RPM - Approximate:...... 150 RPM - Approximate: ...... 160 Torque - Approximate:...... 55 ft-lb / 74 Nm Torque - Approximate: ...... 30 ft-lb / 40 Nm Weight:...... 3.1 lb / 1.4 kg Weight: ...... 2.5 lb / 1.1 kg Length:...... 14.5 in / 36.8 cm Length: ...... 10.5 in / 26.7 cm Air Usage:...... 21 cfm Air Usage: ...... 18 cfm Air Inlet:...... 1/4" Air Inlet: ...... 1/4"

l Approximate Working Torque - 55 ft-lb l Approximate Working Torque - 30 ft-lb

30 www.eagle-premier.com RATCHET WRENCHES

INDUSTRIAL DUTY 51053120 3220 INDUSTRIAL DUTY 1/4" Ratchet Wrench 3/8" Ratchet Wrench l Rear exhaust l Composite grip with silencer. for increased operator comfort. l For smaller fasteners. l Built-in grease fitting l Patented head design for lubrication ease. for increased durability. l Patented head design for increased durability.

Specifications: Specifications: Drive Size: ...... 1/4" Drive Size: ...... 3/8" RPM - Approximate: ...... 250 RPM - Approximate: ...... 280 Torque - Approximate: ...... 20 ft-lb / 27 Nm Torque - Approximate: ...... 80 ft-lb / 108.8 Nm Weight: ...... 1.5 lb / 0.7 kg Weight: ...... 2.7 lb / 1.2 kg Length: ...... 8.1 in / 20.5 cm Length: ...... 10.9 in / 27.7 cm Air Usage: ...... 2.8 cfm Air Usage: ...... 4 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" l Approximate Working Torque - 20 ft-lb l Approximate Working Torque - 80 ft-lb

3320 INDUSTRIAL DUTY

1/2" Ratchet Wrench

l Excellent for general purpose use. l Improved gear head extends life. l Power for tough jobs. l Patented head design for increased durability.

Specifications: Drive Size:...... 1/2" RPM - Approximate:...... 280 Torque - Approximate:...... 80 ft-lb / 108.8 Nm Weight:...... 2.7 lb / 1.2 kg Length:...... 10.9 in / 27.7 cm Air Usage:...... 4 cfm Air Inlet:...... 1/4"

l Approximate Working Torque - 80 ft-lb

www.eagle-premier.com 31 NOTES

32 www.eagle-premier.com POWER TOOL SOLUTIONS FASTENING TOOLS

Clutch Selection Information ...... 34 Stall Screwdrivers ...... 35 Adjustable Clutch Screwdrivers ...... 35 Positive Clutch Screwdrivers ...... 36 Impact Screwdrivers ...... 36 Torque Controlled Screwdrivers ...... 37-40 AuditorTM Torque CubeTM Testers ...... 41

POWER TOOL SOLUTIONS™ CLUTCH SELECTION INFORMATION

1102 Adjustable Clutch Screwdriver Page 35

Application Selection Chart

TOOL TYPE: USES: KEY BENEFITS:

Auto Shut-off: l l General assembly Torque control l Clutch with internal cam shuts off l Critical applications l Low maintenance instantly upon reaching a preset l l All joint types Fast cycle times torque level. l l High production Low Noise l Precise torque control. Adjustable Clutch: l General assembly l Wide torque range l Clutch that ratchets upon reach- l Woodworking l High torque output ing torque. l High speed l General torque control.

Positive Clutch: l General assembly l Can provide higher rundown l Clutch that ratchets upon l High prevailing torque torque than seated torque reaching torque. l Woodworking l Wide torque range l Operator can increase torque output l with forward/downward pressure. Soft joints Stall: l Woodworking l Small, light tool l Air motor stalls out upon reaching torque. l Soft joints l Simple maintenance l Torque proportionate to l Sheet metal screws l Torque adjusted by air pressure setting. air pressure

Impact: l Industrial maintenance l Fast cycle times l Twin Hammer Impact mechanism. l Tire service l Heavy assembly

34 www.eagle-premier.com FASTENING TOOLS

51051105 INDUSTRIAL DUTY 1101 GENERAL DUTY Stall Stall Screwdriver Screwdriver l 1/4" quick l 1/4" quick change chuck. change chuck. l High power-to-weight ratio. l High power-to-weight ratio. l Motor stalls when fastener l Side trigger reverse lever. torque resistance overcomes l Motor stalls when fastener the power of the air motor. torque resistance overcomes the power of the air motor.

Specifications: Specifications: Hex Drive Size: ...... 1/4" Hex Drive Size: ...... 1/4" RPM - Approximate: ...... 800 RPM - Approximate: ...... 1,800 Torque Output : ...... 60 in-lb / 69 kgf-cm Torque Range - Approximate: .... 10 - 45 in-lb / 11.5 - 51.8 kgf-cm Weight: ...... 1.5 lb / 0.7 kg Weight: ...... 3.0 lb / 1.4 kg Length: ...... 5.1 in / 13.0 cm Length: ...... 7.0 in / 17.8 cm Air Usage: ...... 14 cfm Air Usage: ...... 16 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

1102 INDUSTRIAL DUTY 1115 GENERAL DUTY Adjustable Clutch Positive Clutch Screwdriver Screwdriver l Cushion l 1/4" quick clutch. change chuck. l Handle exhaust l High power -to-weight ratio. directs air away. l For wood and general assembly. l Convenient forward/reverse valve.

Specifications: Specifications: Hex Drive Size: ...... 1/4" Hex Drive Size: ...... 1/4" RPM - Approximate: ...... 1,800 RPM - Approximate: ...... 1,800 Torque Range - Approximate: .... 55 - 160 in-lb / 63 - 184 kgf-cm Torque Output : ...... 475 in-lb / 547 kgf-cm Weight: ...... 2.6 lb / 1.2 kg Weight: ...... 2.6 lb / 1.2 kg Length: ...... 8.8 in / 22.2 cm Length: ...... 8.0 in / 20.3 cm Air Usage: ...... 16 cfm Air Usage: ...... 16 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 35 FASTENING TOOLS

INDUSTRIAL DUTY 1550 INDUSTRIAL DUTY 51051121 15605105 Positive Clutch Twin Hammer Screwdriver Impact Screwdriver l 1/4" quick l No torque reaction. change chuck. l Fast efficient tightening tool. l High l High power-to-weight ratio. power-to-weight ratio. l For wood and general assembly. l Sand Cast housing.

Specifications: Specifications: Hex Drive Size: ...... 1/4" Hex Drive Size: ...... 1/4" RPM - Approximate: ...... 1,800 RPM - Approximate: ...... 1550: 10,500 1560: 8,500 Torque Output : ...... 415 in-lb / 478 kgf-cm Torque Range - Approximate: .... 1550: 10-31 ft-lb / 13.6-42.2 Nm Weight: ...... 2.5 lb / 1.1 kg 1560: 30-52 ft-lb / 40.8-70.7 Nm Length: ...... 6.8 in / 17.1 cm Weight: ...... 1550: 1.2 lb / 0.55 kg Air Usage: ...... 16 cfm 1560: 2 lb / 0.9 kg Air Inlet: ...... 1/4" Length: ...... 1550: 6.8 in / 17.3 cm 1560: 8.0 in / 20.3 cm Air Usage: ...... 1550: 2.5 cfm 1560: 4 cfm Air Inlet: ...... 1/4"

1555 INDUSTRIAL DUTY 1577 INDUSTRIAL DUTY Twin Hammer Impact Screwdriver Impact Screwdriver l Lightweight. l 7 vanes high speed motor. l No torque reaction. l Totally enclosed pinless impact mechanism with l Fast rundown speed. advanced heat treatment. l Tease throttle with 4-stop regulator for speed control and torque output. l 360° adjustable rear exhaust. l Detachable belt clip.

Specifications: Hex Drive Size: ...... 1/4" Specifications: RPM - Approximate: ...... 13,000 Hex Drive Size...... 1/4" Torque Range - Approximate: .... 47-58 ft-lb / 63-78 Nm Torque Range: ...... 10-65 ft-lb / 13.6-88.4 Nm Weight: ...... 1.6 lb / 0.7 kg RPM - Approximate: ...... 10,000 Length: ...... 6.38 in / 16.2 cm Weight: ...... 2.3 lb / 1.04 kg Air Usage: ...... 4 cfm Length: ...... 6.5 in / 16.5 cm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

INLINE REGULATORS: see page 58 for part numbers and specifications.

36 www.eagle-premier.com FASTENING TOOLS

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-33011-25Q EPTS-33017-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 9.7-18.5 in-lb / 1.1-2.1 Nm Torque Range: ...... 6.2-13.2 in-lb / .7-1.5 Nm RPM - Approximate: ...... 1,100 RPM - Approximate: ...... 1,700 Weight: ...... g .9 lb / .4 k Weight: ...... g .9 lb / .4 k Length: ...... 7.4 in / 18.7 cm Length: ...... 7.4 in / 18.7 cm Air Usage: ...... 7 cfm Air Usage: ...... 7 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 70 db(A) Noise Level ...... 70 db(A)

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-33023-25Q EPTS-34008-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 3.5-13.2 in-lb / .4-1.5 Nm Torque Range: ...... 14.1-35.2 in-lb / 1.6-4 Nm RPM - Approximate: ...... 2,300 RPM - Approximate: ...... 800 Weight: ...... g .9 lb / .4 k Weight: ...... 1.4 lb / .7 kg Length: ...... 7.4 in / 18.7 cm Length: ...... 8.2 in / 20.9 cm Air Usage: ...... 7 cfm Air Usage: ...... 10.5 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 71 db(A) Noise Level ...... 70 db(A)

www.eagle-premier.com 37 FASTENING TOOLS

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-34015-25Q EPTS-34021-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 9.7-23 in-lb / 1.1-2.6 Nm Torque Range: ...... 6.2-19.4 in-lb / .7-2.2 Nm RPM - Approximate: ...... 1,500 RPM - Approximate: ...... 2,100 Weight: ...... 1.4 lb / .7 kg Weight: ...... 1.4 lb / .7 kg Length: ...... 8.2 in / 20.9 cm Length: ...... 8.2 in / 20.9 cm Air Usage: ...... 10.5 cfm Air Usage: ...... 10.5 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 70 db(A) Noise Level ...... 74 db(A)

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-33011P-25Q EPTS-33017P-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 9.7-18.5 in-lb / 1.1-2.1 Nm Torque Range: ...... 6.2-13.2 in-lb / .7-1.5 Nm RPM - Approximate: ...... 1,100 RPM - Approximate: ...... 1,700 Weight: ...... g .9 lb / .4 k Weight: ...... g .9 lb / .4 k Length: ...... 7.4 in / 18.7 cm Length: ...... 7.4 in / 18.7 cm Air Usage: ...... 7 cfm Air Usage: ...... 7 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 70 db(A) Noise Level ...... 70 db(A)

38 www.eagle-premier.com FASTENING TOOLS

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-33023P-25Q EPTS-34008P-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 3.5-8.8 in-lb / .4-1 Nm Torque Range: ...... 14.1-35.2 in-lb / 1.6-4 Nm RPM - Approximate: ...... 2,300 RPM - Approximate: ...... 800 Weight: ...... g .9 lb / .4 k Weight: ...... 1.4 lb / .7 kg Length: ...... 7.4 in / 18.7 cm Length: ...... 8.2 in / 20.9 cm Air Usage: ...... 7 cfm Air Usage: ...... 10.5 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 71 db(A) Noise Level ...... 70 db(A)

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-34015P-25Q EPTS-34021P-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 9.7-23 in-lb / 1.1-2.6 Nm Torque Range: ...... 6.2-19.4 in-lb / .7-2.2 Nm RPM - Approximate: ...... 1,500 RPM - Approximate: ...... 2,100 Weight: ...... 1.4 lb / .7 kg Weight: ...... 1.4 lb / .7 kg Length: ...... 8.2 in / 20.9 cm Length: ...... 8.2 in / 20.9 cm Air Usage: ...... 10.5 cfm Air Usage: ...... 10.5 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 70 db(A) Noise Level ...... 74 db(A)

www.eagle-premier.com 39 FASTENING TOOLS

INDUSTRIAL DUTY INDUSTRIAL DUTY EPTS-35005P-25Q EPTS-35008P-25Q Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 44-92.4 in-lb / 5-10.5 Nm Torque Range: ...... 26.4-48.4in-lb / 3-5.5 Nm RPM - Approximate: ...... 500 RPM - Approximate: ...... 800 Weight: ...... 2.2 lb / 1 kg Weight: ...... 2.2 lb / 1 kg Length: ...... 9.5 in / 24 cm Length: ...... 9.5 in / 24 cm Air Usage: ...... 17.5 cfm Air Usage: ...... 17.5 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 74 db(A) Noise Level ...... 75 db(A)

INDUSTRIAL DUTY EPTS-N34003-25 INDUSTRIAL DUTY EPTS-35017P-25Q EPTS-N34003-38 Torque Controlled Torque Controlled Pneumatic Screwdriver Pneumatic Screwdriver l Long lasting clutch design – l Long lasting clutch design – 2,000,000 cycle tested. 2,000,000 cycle tested. l Quick shut off clutch. l Quick shut off clutch. l Accurate torque delivery. l Accurate torque delivery. l Simple torque adjustment. l Simple torque adjustment. l Great power to weight l Great power to weight for best ergonomics. for best ergonomics.

Specifications: Specifications: Torque Range: ...... 9.7-23 in-lb / 1.5-2.6 Nm Torque Range: ...... 9-110 in-lb / 1- 12 Nm RPM - Approximate: ...... 1700 RPM - Approximate: ...... 300 Weight: ...... 2.2 lb / 1 kg Weight: ...... 2.4 lb / 1.08 kg Length: ...... 9.5 in / 24 cm Length: ...... 14.5 in / 36.83 cm Air Usage: ...... 17.5 cfm Air Usage: ...... 17.5 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4" Noise Level ...... 75 db(A) Noise Level ...... 75 db(A)

Available in 1/4"(EPTS-N34003-25) and 3/8" (EPTS-N34003-38) Square Drive

40 www.eagle-premier.com 5105AUDITORTM TORQUE CUBETM DIGITAL TORQUE TESTERS

l Simple, easy to use, portable tester. TM l Intuitive Auditor Series menu structure for quick start up. ATCE-100 l Bidirectional accuracy of ±1% of indicated reading within top 90% of full scale. l Eight (8) available engineering units: oz-in, lbf-in, lbf-ft, Nm, Ncm, kgf-cm, gf-cm, kgf-m. l Three modes of operation: Track, Peak and 1st Peak. l Selectable power tool filtering: 125Hz, 250Hz, 500Hz, 1000Hz and 1500Hz. l Serial data output. l NiMh rechargeable batteries provide a minimum of 8-10 hours of continuous use. l For testing of power tools, click, dial and digital wrenches. l Data storage 999 readings.

MODEL RECOMMENDED TORQUE RANGE WEIGHT W X H X D W X H X D IN-LB NM LB KG MM IN ATCE-25 2.5 - 25 .28 - 2.8 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25 ATCE-100 10.0 -100 1.3 - 11.3 2.5 1.13 79 x 95 x 83 3.13 x 3.75 x 3.25

www.eagle-premier.com 41 NOTES

42 www.eagle-premier.com POWER TOOL SOLUTIONS DRILLS

Drills ...... 44-45

POWER TOOL SOLUTIONS™ DRILLS

INDUSTRIAL DUTY 51057005 7110 INDUSTRIAL DUTY 1/4" Pistol Drill 3/8" Pistol Drill Reversible Reversible l Compact size. l Compact size. l Easy reach reverse selector. l Easy reach reverse selector. l Equipped with Jacobs Chuck®. l 3/8" Jacobs Chuck®. l Bottom handle exhaust. l Bottom handle exhaust.

Specifications: Specifications: Chuck Capacity: ...... 1/4" Chuck Capacity: ...... 3/8" RPM - Approximate: ...... 1,800 RPM - Approximate: ...... 1,800 Weight: ...... 1.8 lb / 0.8 kg Weight: ...... 1.8 lb / 0.8 kg Length: ...... 7.2 in / 18.4 cm Length: ...... 7.2 in / 18.4 cm Air Usage: ...... 13.7 cfm Air Usage: ...... 13.7 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

7100 GENERAL DUTY 7650 GENERAL DUTY 3/8" Inline Drill 3/8" Angle Drill Non-Reversible Reversible l Inline design for l For general purpose tight space applications. drilling in confined areas. l Ribbed steel housing l Convenient for better grip. forward/reverse button. l Rear exhaust. l Equipped with Jacobs Chuck®.

Specifications: Specifications: Chuck Capacity: ...... 3/8" Chuck Capacity: ...... 3/8" RPM - Approximate: ...... 1,500 RPM - Approximate: ...... 1,500 Weight: ...... 2.3 lb / 1.0 kg Weight: ...... 2.3 lb / 1.0 kg Length: ...... 9.0 in / 22.9 cm Length: ...... 8.3 in / 21.1 cm Air Usage: ...... 16 cfm Air Usage: ...... 14 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

44 www.eagle-premier.com DRILLS

51057102 GENERAL DUTY 7107 GENERAL DUTY 3/8" Pistol Drill 3/8" Pistol Drill Reversible Non-Reversible l Positive action l Positive action trigger controls speed. trigger controls speed. l For drilling, counter sinking, l For drilling, counter sinking, and wire brushing. and wire brushing.

Specifications: Specifications: Chuck Capacity: ...... 3/8" Chuck Capacity: ...... 3/8" RPM - Approximate: ...... 1,800 RPM - Approximate: ...... 2,600 Weight: ...... 3.0 lb / 1.4 kg Weight: ...... 4.0 lb / 1.8 kg Length: ...... 7.0 in / 17.8 cm Length: ...... 7.0 in / 17.8 cm Air Usage: ...... 16 cfm Air Usage: ...... 20 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

GENERAL DUTY 7105 GENERAL DUTY 7106 1/2" Pistol Drill 1/2" Pistol Drill Non-Reversible Reversible l Positive action l Positive action trigger controls speed. trigger controls speed. l For drilling, counter sinking, l For drilling, counter sinking, and wire brushing. and wire brushing.

Specifications: Specifications: Chuck Capacity: ...... 1/2" Chuck Capacity:...... 1/2" RPM - Approximate: ...... 500 RPM - Approximate:...... 800 Weight: ...... 4.0 lb / 1.8 kg Weight:...... 4.0 lb / 1.8 kg Length: ...... 7.0 in / 17.8 cm Length:...... 7.0 in / 17.8 cm Air Usage: ...... 20 cfm Air Usage:...... 20 cfm Air Inlet: ...... 1/4" Air Inlet:...... 1/4"

www.eagle-premier.com 45 INDUSTRIAL DUTY INDUSTRIAL DUTY 5105714P-2100R 714P-3100 1/4" Pistol Drill 1/4" Pistol Drill Reversible Non-Reversible l Precision machined gears. l Precision machined gears. l Robust sand cast housing. l Robust sand cast housing. l Steel front end. l Steel front end. l Ergonomic handle design. l Ergonomic handle design. l Equipped w/Jacobs Chuck®. l Equipped w/Jacobs Chuck®. l Variable speed trigger. l Variable speed trigger. l Muffled directional rear exhaust. l Muffled directional rear exhaust.

Specifications: Specifications: Chuck Capacity: ...... 1/4" Chuck Capacity: ...... 1/4" RPM - Approximate: ...... 2,100 RPM - Approximate: ...... 3,100 Weight (w/chuck): ...... 1.6 lb / 0.73 kg Weight (w/chuck): ...... 1.45 lb / 0.66 kg Length: ...... 6.87 in / 17.45 cm Length: ...... 5.75 in / 14.61 cm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

738P-3200 INDUSTRIAL DUTY 712P-5100 INDUSTRIAL DUTY 3/8" Pistol Drill 1/2" Pistol Drill Non-Reversible Non-Reversible l Precision machined gears. l Precision l Robust sand cast housing. machined gears. l Steel front end. l Robust sand cast housing. l Ergonomic handle design. l Steel front end. l Equipped w/Jacobs Chuck®. l Ergonomic handle design. l Variable speed trigger. l Equipped w/Jacobs Chuck®. l Muffled directional rear exhaust. l Variable speed trigger. l Muffled directional rear exhaust.

Specifications: Specifications: Chuck Capacity: ...... 3/8" Chuck Capacity: ...... 1/2" RPM - Approximate: ...... 3,200 RPM - Approximate: ...... 5,100 Weight: ...... 2.65 lb / 1.20 kg Weight: ...... 2.35 lb / 1.07 kg Length: ...... 7.25 in / 18.42 cm Length: ...... 7.12 in / 18.08 cm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

46 www.eagle-premier.com 714P-4205105 INDUSTRIAL DUTY 1/2" Pistol Drill Non-Reversible l Precision machined gears. l Robust sand cast housing. l Steel front end. l Ergonomic handle design. l Equipped w/Jacobs Chuck®. l Variable speed trigger. l Muffled directional rear exhaust.

Specifications: Chuck Capacity: ...... 1/2" RPM - Approximate: ...... 420 Weight: ...... 2.95 lb / 1.34 kg Length: ...... 8.5 in / 21.59 cm Air Inlet: ...... 1/4"

www.eagle-premier.com 47 NOTES

48 www.eagle-premier.com POWER TOOL SOLUTIONS PERCUSSION TOOLS

Air Hammers ...... 48 Chipping Hammers / Needle Scalers ...... 49-50 Flux Chipper / Scaler / Chipper ...... 50 Replacement Needles ...... 50

POWER TOOL SOLUTIONS™ PERCUSSION TOOLS

51054100 GENERAL DUTY 4001 GENERAL DUTY Air Air Hammer Hammer l Positive action l Economical trigger controls speed. air hammer for fast cutting action. l Heavy duty spring retainer. l For muffler and pipe removal, l Chisel sold separately. body shop work, scraping rust, light front-end work. l For exhaust system, panel cutting, general repair work. l Includes 6" chisel with 1-3/8" angle blade. Specifications: Specifications: For Use With: ...... Chisel For Use With: ...... Chisel Chisel Shank ...... 0.401" Chisel Shank: ...... 0.401" Bore: ...... 0.75" Bore: ...... 0.75" Stroke: ...... 2.375" Stroke: ...... 2.625" BPM - Approximate: ...... 2,100 BPM - Approximate: ...... 3,500 Weight: ...... 3.3 lb / 1.5 kg Weight: ...... 3.8 lb / 1.7 kg Length: ...... 7.8 in / 19.8 cm Length: ...... 6.8 in / 17.1 cm Air Usage: ...... 10 cfm Air Usage: ...... 15 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

INDUSTRIAL DUTY 4178 4260 GENERAL DUTY Air Air Hammer Hammer l Heavy duty l Feathering spring retainer. throttle for control. l Long lasting. l Heavy duty spring retainer. l For front end, exhaust, l Riveting applications. frame, body work. l Chisel sold separately. l Chisel sold separately.

Specifications: Specifications: For Use With: ...... Chisel For Use With: ...... Chisel Chisel Shank: ...... 0.401" Chisel Shank: ...... 0.498" Bore: ...... 0.75" Bore: ...... 0.75" Stroke: ...... 3.625" Stroke: ...... 3.750" BPM - Approximate: ...... 2,100 BPM - Approximate: ...... 1,800 Weight: ...... 4.3 lb / 2.0 kg Weight: ...... 5.5 lb / 2.5 kg Length: ...... 8.5 in / 21.6 cm Length: ...... 7.8 in / 19.8 cm Air Usage: ...... 12 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

50 www.eagle-premier.com PERCUSSION TOOLS

51054009 INDUSTRIAL DUTY 4010 INDUSTRIAL DUTY 2" Chipping 3" Chipping Hammer Hammer l Drop forged handle. l Drop forged handle. l Front exhaust. l Front exhaust. l Oval collar. l Oval collar. l For paint, scale, rust removal. l For paint, scale, rust removal. l Chisel sold separately. l Chisel sold separately.

Specifications: Specifications: For Use With: ...... Chisel For Use With: ...... Chisel Chisel Shank: ...... 68 round or .58 hex bushing Chisel Shank: ...... 68 round or .58 hex bushing Bore: ...... 1.125" Bore: ...... 1.125" Stroke: ...... 2.0" Stroke: ...... 3.0" BPM - Approximate: ...... 1,900 BPM - Approximate: ...... 1,700 Weight: ...... 16.0 lb / 7.3 kg Weight: ...... 17.8 lb / 8.1 kg Length: ...... 15.5 in / 39.4 cm Length: ...... 16.3 in / 41.3 cm Air Usage: ...... 12 cfm Air Usage: ...... 12 cfm Air Inlet: ...... 1/2" Air Inlet: ...... 1/2"

4615 INDUSTRIAL DUTY 4620 INDUSTRIAL DUTY

Mini Needle Scaler Needle Only Scaler 11.5 inches l Straight handle long l Heavy-duty scaler for hard to reach areas. with pistol grip. l 12-piece 3mm needle set included. l 28-piece 3mm l For rust removal, needle set included. weld slag, old paint. l For rust removal, weld slag, old paint.

Specifications: Specifications: For Use With: ...... Needles (9024 or 9043) For Use With: ...... Needles (9024 or 9043) Needle Diameter: ...... 12 @ 3 mm each Needle Diameter: ...... 28 @ 3 mm each Bore: ...... 1" Bore: ...... 1" Stroke: ...... 2.375" Stroke: ...... 2.375" BPM - Approximate: ...... 4,000 BPM - Approximate: ...... 4,500 Weight: ...... 2.8 lb / 1.3 kg Weight: ...... 8.0 lb / 3.6 kg Length: ...... 11.5 in / 29.2 cm Length: ...... 13.8 in / 35.0 cm Air Usage: ...... 4 cfm Air Usage: ...... 7 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 51 PERCUSSION TOOLS

4005 INDUSTRIAL DUTY 51054004 INDUSTRIAL DUTY Needle Scaler Flux Chipper

l Hardened barrels and l Hardened barrels strict tolerances and strict tolerances for maximum life. for maximum life. l For foundries, l For foundries, fabrication shops, fabrication shops, ship building and construction. ship building, and construction.

Specifications: Specifications: For Use With: ...... Needles (9024 or 9043) For Use With: ...... 7" Angle Chisel Needle Diameter: ...... 19 @ 3 mm each (730224C) Bore: ...... 1" Chisel Diameter: ...... 0.401" Stroke: ...... 1.5" Bore: ...... 1" BPM - Approximate: ...... 4,600 Stroke: ...... 1.5" Weight: ...... 6.2 lb / 2.8 kg BPM - Approximate: ...... 4,600 Length: ...... 18.0 in / 45.7 cm Weight: ...... 5.8 lb / 2.6 kg Air Usage: ...... 12 cfm Length: ...... 9.8 in / 24.8 cm Air Inlet: ...... 1/4" Air Usage: ...... 12 cfm Air Inlet: ...... 1/4"

9024 / 9043 4005SC INDUSTRIAL DUTY

Replacement Needles Scaler/Chipper

l Hardened barrels and strict tolerances for maximum life. l For rust removal, weld slag, old paint.

9024

730224C Specifications: For Use With: ...... Needles (9024) Needle Diameter: ...... 19 @ 3 mm each Part Number Length Diameter For Use With: ...... 7" Angle Chisel (730224C) Chisel Diameter: ...... 0.498" 9024 7 in / 17.5 cm 1/8 in / 3.18 mm Bore: ...... 1" 9043 5 in / 12.5 cm 1/8 in / 3.18 mm Stroke: ...... 1.5" 9024 and 9043 are suitable for 4005, 4005SC, 4615 and 4620 BPM - Approximate: ...... 4,600 Weight: ...... 6.2 lb / 2.8 kg Length: ...... 18.0 in / 45.7 cm Air Usage: ...... 12 cfm Sold as individual needles, see tool set requirements. Air Inlet: ...... 1/4"

52 www.eagle-premier.com POWER TOOL SOLUTIONS CUTTING AND SPECIALTY TOOLS

Saw / Punch Tool / Cut-Off Tools ...... 52 Blow Guns ...... 53 Tire Buffers ...... 53-54

9024

POWER TOOL SOLUTIONS™ SPECIALTY TOOLS

51056050 INDUSTRIAL DUTY 6301 INDUSTRIAL DUTY Air Reciprocating Punch / Flange Kit Saw l High performance l 360o rotating head motor provides adds versatility. aggressive cutting action. l Saves time compared l Insulated handle. to manual pliers and punches. l For cutting plastics, l Maximum thickness fiberglass, sheet metal. of sheet metal up to 1/32". l For preparation of welding sheet metal. Specifications: Specifications: SPM - Approximate: ...... 9,500 Flange Diameter: ...... 3/16" Teeth: ...... 14 / 24 /32 Weight: ...... 2.3 lb / 1.0 kg Stroke: ...... 10 mm Length: ...... 8.5 in / 21.6 cm Weight: ...... 2.2 lb / 1.0 kg Air Usage: ...... 0.24 cfm / cycle Length: ...... 9.3 in / 23.6 cm Air Inlet: ...... 1/4" Air Usage: ...... 7 cfm Air Inlet: ...... 1/4"

6812EC INDUSTRIAL DUTY 6191 INDUSTRIAL DUTY

3" Cut-Off Tool 3" Cut-Off Tool

l Lightweight and durable. l Rear exhaust directs l Ergonomic composite housing exhaust air away. with a soft comfortable grip. l Lock-off throttle prevents l Less noise, vibration, and thermal accidental start-ups. transfer than aluminum tools. l For cutting muffler clamps, l Protective metal guard. use in body shops.

Specifications: Specifications: Maximum Disc Size: ...... 3" Maximum Disc Size: ...... 3" RPM - Approximate: ...... 20,000 RPM - Approximate: ...... 24,000 Weight: ...... 1.7 lb / 0.77 kg Weight: ...... 2.0 lb / 0.9 kg Length: ...... 7.38 in / 18.7 cm Length: ...... 8.0 in / 20.3 cm Air Usage: ...... 3 cfm Air Usage: ...... 10 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

54 www.eagle-premier.com SPECIALTY TOOLS

51058116 INDUSTRIAL DUTY 8125 INDUSTRIAL DUTY Suction / Blow Gun Blow Gun l Reversible l Inexpensive blow gun. nozzle ring l Oil and acid resistant plastic. creates portable l Long lever for precise control. vacuum cleaner. l 3 mm nozzle opening. l Acts as a blow gun l 95 mm nozzle length on reverse side. for difficult to reach places. l Includes two nozzles. l Safety slot - 30 PSI maximum l Comes with bag. at opening. Specifications: Specifications: Capacity: ...... 6.3 cfm Nozzle Opening: ...... 3 mm Tip Accessories: ...... 4 pieces Nozzle Length: ...... 95 mm Weight: ...... 1.0 lb / 0.4 kg Weight: ...... 0.2 lb / 0.1 kg Length: ...... 5.7 in / 14.4 cm Length: ...... 8.9 in /22.6 cm

GENERAL DUTY 5070 (high speed) GENERAL DUTY 5114 5075 (low speed) Tire Buffer Tire Buffer l Built-in air regulator. l Specifically designed for recapping, l Quick change chuck. tire scuffing, and roughing. l Rib textured handle for firm grip. l Quick change chuck permits rapid l Piped away exhaust kit available. change of buffing stones. l l Includes 7/16" quick change Complete with air hose, adapter with 3/8" - 24 male end. exhaust hose, and integral silencer. l Includes 7/16" Quick Change Adapter with 3/8" - 24 male end. Specifications: Specifications: Collet Size: ...... 7/16" Collet Size: ...... 7/16" RPM - Approximate: ...... 2,500 RPM - Approximate: ...... 5070: 19,000 5075: 3,400 Throttle Type: ...... Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 2.5 lb / 1.1 kg Weight: ...... 2.0 lb / 0.8 kg Length: ...... 8.5 in / 21.6 cm Length: ...... 7.8 in / 19.8 cm Approximate Power: ...... p 0.50 h Approximate Power: ...... 0.54 hp Air Usage: ...... 17 cfm Air Usage: ...... 18 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

www.eagle-premier.com 55 SPECIALTY TOOLS

GENERAL DUTY GENERAL DUTY 5072 51055077 Tire Buffer Tire Buffer

l High speed buffer. l Low speed buffer. l Specifically designed l Specifically designed for recapping, for recapping, tire scuffing and roughing. tire scuffing, and roughing. l Complete with air hose, exhaust hose l Complete with air hose, and integral silencer. exhaust hose, and integral silencer. l With 3/8" Jacobs® Chuck & key. l With 3/8" Jacobs® Chuck & key.

Specifications: Specifications: Collet Size: ...... 3/8" Collet Size: ...... 3/8" RPM - Approximate: ...... 19,000 RPM - Approximate: ...... 3,400 Throttle Type: ...... Safety Lever Throttle Type: ...... Safety Lever Exhaust: ...... Rear Exhaust: ...... Rear Weight: ...... 2.0 lb / 0.9 kg Weight: ...... 2.0 lb / 0.9 kg Length: ...... 7.8 in / 19.8 cm Length: ...... 7.8 in / 19.8 cm Approximate Power: ...... p 0.54 h Approximate Power: ...... p 0.54 h Air Usage: ...... 18 cfm Air Usage: ...... 18 cfm Air Inlet: ...... 1/4" Air Inlet: ...... 1/4"

56 www.eagle-premier.com POWER TOOL SOLUTIONS ACCESSORIES

Torque Wrenches ...... 56 Balancers / Retractors ...... 57 FRL / Lubricators / Regulators ...... 58 Hoses ...... 59 Air Fittings ...... 59 Couplers ...... 59-60 Sockets / Bits / Mag-O-Nets® ...... 61-64

POWER TOOL SOLUTIONS™ ACCESSORIES

5105TORQUE WRENCHES

Part # Torque Range Square Drive DW-75 0 - 75 in-lb 1/4" DW-300 0 - 300 in-lb 3/8" DW-175F 0 - 175 ft-lb 1/2"

Part # Torque Range Square Drive CWR -100 40 - 100 in-lb 1/4" CWR -200 50 - 200 in-lb 1/4" CWR SERIES CWR-250F 30 - 250 ft-lb 3/4" CLICK WRENCH

DW SERIES DIAL INDICATING

DW Series CWR Series l Accuracy is ±3% of indicated reading. l Accuracy is ±3% of indicated reading. l Bi-directional use for clockwise and l Light weight tool with streamlined counter clockwise auditing. design. Operator can apply torque l Light weight tool design and ergonomic without undue strain due to overall grip ensure operator comfort. length of tool. l Large dial face allows quick and easy l Fits standard sockets with ¼" - ½" reference. square drive sizes. l Overall length of tool is designed for l Repeatable and detectable action. comfort. Operator can apply torque l Micrometer adjustable. without undue strain. l For Metric Series add "A" at the end of l Prevents cosmetic damage to parts. model number. Edges of wrench are covered in soft rubber. l Fits standard sockets with ¼" - ½" square drive sizes. l For metric series add "A" at the end of model number.

58 www.eagle-premier.com ACCESSORIES

5105GRAVITY-DEFYING BALANCERS

Part # Approximate Capacity Stroke ASB-0C 1.1 - 3.3 lb 0.5 - 1.5 kg 51.1" 130 cm ASB-3C 3.3 - 6.6 lb 1.5 - 3 kg 86.4" 220 cm ASB-5C 5.5 - 11 lb 2.5 - 5 kg 86.4" 220 cm ASB-0C TW SERIES Part # Approximate Capacity Stroke TW-00 1.1 - 3.3 lb 0.5 - 1.5 kg 18" 45.7 cm l Built in Safety Features: Cable, drum, and TW-0 1.1 - 3.3 lb 0.5 - 1.5 kg 3.3' 100 cm containerized spring are fully visible without TW-3 2.2 - 6.6 lb 1.0 - 3 kg 4.3' 131 cm cm opening the unit for easy safety checks. TW-5 5.5 - 11 lb 2.5 - 5 kg 4.3' 131 TW-9 10 - 20 lb 4.5 - 9 kg 4.3' 131 cm l Ergonomic Spring Release: Automatic safety TW-15 20 - 33 lb 9 - 15 kg 4.3' 131 cm lock provides extra control. TW-22 33 - 48 lb 9 - 22 kg 5' 152 cm l Extended Cable Length: Stainless steel cables TW-30 48 - 66 lb 22 - 30 kg 5' 152 cm allow for extended reach on applications. TW-40 66 - 88 lb 30 - 40 kg 5' 152 cm TW-50 88 - 110 lb 40 - 50 kg 5' 152 cm l Enhanced Gear Mechanism: Allows for more TW-60 110 - 132 lb 50 - 60 kg 5' 152 cm exact adjustment of tension. TW-70 132 - 154 lb 60 - 70 kg 5' 152 cm l No Recoil and Low Resistance: Tapered drum style provides gravity defying tool positioning and travel.

5105RETRACTORS

Part # Approximate Capacity Stroke RPA-1 0.5 - 1.5 lb 0.2 - 0.7 kg 5' 152 cm RPA-2 1.5 - 3.0 lb 0.7 - 1.4 kg 5' 152 cm RPA-3 3.0 - 5.0 lb 1.4 - 2.3 kg 5' 152 cm

Part # Approximate Capacity Stroke RMA-7L 5 - 10 lb 2.3 - 4.8 kg 8' 243.8 cm RMA-15L 10 - 15 lb 4.5 - 6.8 kg 8' 243.8 cm RPA SERIES RMA-20L 15 - 23 lb 6.8 - 10.4 kg 8' 243.8 cm RMA-L SERIES

RMA-L Series RPA Series l External tension adjustment. l No tools needed for setting of tension. l Ratchet cable lock. l Five foot nylon coated steel cable. l Steel housing with polyester finish. l Reinforced hanging bracket includes l Reinforced hanging bracket includes provision for safety cable. provision for safety cable. l Adjustable cable stop. l Eight foot x 3/32" coated steel cable. l Tool clip included. l Tool clip included.

www.eagle-premier.com 59 ACCESSORIES

5105FRL UNITS

In order to increase the life of your Part # NPT Flow Rate tools, we recommend that you install Port Size SCFM an Eagle filter, regulator and AFRL-2 1/4" 70 lubricator between the air supply AFRL-3 3/8" 140 and power tool. AFRL-4 1/2" 140 AFRL-8 1" 180 l Filter: Traps the moisture before it enters the air tool. Part # NPT Flow Rate AFRL-2-C 7070 l Regulator: Adjusted to the Port Size SCFM Compact FRL Compact FRL correct air pressure, maintaining AFRL-2-C 1/4" 60 consistent performance. AFRL-3-C 3/8" 105 7070 3/8"

l Lubricator: Allows the proper amount of lubrication needed for top performance.

AFRL-3 Full Size FRL

5105INLINE LUBRICATORS

l These mini-type lubricators keep Part # Description air operated tools performing 7006 Mini Inline Lubricator with greater reliability. Each tool's 1/4" NPT lubrication can be adjusted easily 7007 Midget Inline Lubricator right on the tool. 1/4" NPT 7008 Master Inline Lubricator l Installed inline with the air line 3/8" NPT immediately before the tools air inlet fitting.

5105INLINE REGULATORS

l Inline regulators allow easy Part # Description adjustment of the airflow to each 932-110-0A 1/4" NPT tool with the turn of a dial. 932-100-0 1/8" NPT

l Installed inline with the air line immediately before the tool's air inlet fitting.

60 www.eagle-premier.com ACCESSORIES

5105COILED HOSES

l Durable polyurethane hose. Part # OD ID Length l Assemblies include reusable ASH-250C-10MSZ 3/8" 1/4" 10' swivel fitting. ASH-250C-15MSZ 3/8" 1/4" 15' l Approximate burst pressure ASH-250C-25MSZ 3/8" 1/4" 25' 428 PSI @ 68oF. ASH-375C-25MSZ 9/16" 3/8" 25' ASH-500C-15MSZ 3/4" 1/2" 15' l Working temperature ASH-500C-25MSZ 3/4" 1/2" 25' -104oF to +175oF. l Straight hose available by the foot with or without fittings. l Ask about full reel pricing.

5105STRAIGHT HOSE BY THE FOOT

l Durable polyurethane hose. Part # Inner Diameter l Excellent recoil memory. ASH-250Z 1/4" ID l Maximum flexibility ASH-375Z 3/8" ID and lightweight. ASH-500Z 1/2" ID l Transparent hose color (opaque available). l Custom colors available. l High chemical resistance.

5105AIR HOSE FITTING

l Provides air hose connections. Part # Description l Swivel fitting helps keep hose 250-RZ 1/4" NPT Rigid Swivel from twisting. 250-SZ 1/4" NPT Swivel 375-RZ 3/8" NPT Rigid l Size fitting to hose size and air flow. Rigid 375-SZ 3/8" NPT Swivel 500-SZ 1/2" NPT Rigid

5105BRASS QUICK COUPLERS

l Provides simple way of connecting Part # Description and disconnecting air tools to hose. B23 1/4" NPT F x 1/4” QC l Manual ball couplers designed for B23E 3/8" NPT F x 1/4” QC use with ergonomic twist plugs. B25 3/8" NPT F x 3/8” QC Brass with nitrate seals. l Rated to 300 PSI, from -40oF to +250oF. l Size fitting to hose size and air flow.

www.eagle-premier.com 61 ACCESSORIES

5105ERGONOMIC SWIVEL COUPLERS

Part # Description TS-30NP-2NPT 3/8 NPT Female x 1/4 NPT Male TS-20NP-2NPT 1/4 NPT Female x 1/4 NPT Male TS-20US-2NPT 1/4 US Plug x 1/4 NPT Male TS-30US-2NPT 3/8 US Plug x 1/4 NPT Male 2FAP-N3M-UA 1/4 NPT Female x 3/8 NPT Male TS-20US-3NPT 1/4 US Plug x 3/8 NPT Male 3FAN3F-N3M 3/8 US Plug x 3/8 NPT Male

l 360o rotation for ease of moving tools. l 45o angle reduces hose bending. l For most portable non-impacting. l Size fitting to hose size and air flow.

O 5105360 SWIVEL AIR CONNECTOR

Part # Inlet Weight 7025S 1/4" NPT 2.5 oz 7021 1/4" NPT 2.5 oz 7021AG 1/4" NPT 3.2 oz 7041A 3/8" NPT 2.5 oz 7041AG 3/8" NPT 3.3 oz 7051 1/2" NPT 6.6 oz

l 360o rotation for difficult angles. l For most portable air tools including screwdrivers, drills, grinders, impacts, sanders, and more. l Size fitting to hose size and air flow.

62 www.eagle-premier.com ACCESSORIES: BITS & SOCKETS

BIT HOLDERS SLOTTED INSERT BITS

L L

H

1/4 Part No L L Part No Screw L L Blade Blade mm in Size mm in Thickness Width

1/4" Hex, Magnetic A38M8-1 8 25 0.98 0.04 0.25 A38M10-1 10 25 0.98 0.05 0.28 A3BHM-3 75 2.94 A3BHM-6 150 5.91 SQUARE RECESS POWER BITS PHILLIPS POWER BITS L

L

Part No Point Nominal L L Size Square Size mm in Part No Point L L Size mm in A3R1/8-2.75 2 1/8" 70 2.76 A3R9/64-2.75 3 9/64" 70 2.76 A3S2-3 2 75 2.95 A3S2-6 2 150 5.91 A3S3-3 3 75 2.95 A3S3-6 3 150 5.91 SQUARE RECESS INSERT BITS

L PHILLIPS INSERT BITS

L Part No Point Nominal L L Size Square Size mm in

Part No Point L L A38R1/8-1 2 1/8" 25 0.98 Size mm in A38R9/64-1 3 9/64" 25 0.98 A38S2-1 2 25 0.98 A38S3-1 3 25 0.98 MAG-O-NETS®

SLOTTED POWER BITS OD L ID

L

l Turn virtually any standard screwdriver bit into a ® Part No Screw L L Blade Blade magnetized bit by simply sliding on a Mag-O-Net collar. Size mm in Thickness Width l An easy, cost-effective alternative to traditional magnetic bit A3M8-3 8 75 2.95 0.04 0.28 holder and insert bit combination. A3M10-3 10 75 2.95 0.05 0.31 l Reusable and interchangeable - once a bit is worn out, simply remove and slide onto the next bit.

Part No Inner Outer Length Additional sizes of bits and sockets (ID) (OD) mm AM1/4Z 7 mm 19 mm 10 mm are available upon request. AM5Z 6 mm 17.5 mm 10 mm AM3/16Z 3/16” 17.5 mm 10 mm

www.eagle-premier.com 63 ACCESSORIES: BITS & SOCKETS

Part No Hex D1 D1 D2 D2 L L STANDARD FASTENER TOOLS mm in mm in mm in Connect your tool to the application with Bits, Sockets, 1/2” Square Drive, Magnetic and Nutsetters from Eagle. A408MP 8 mm 16 0.61 25 0.98 40 1.58 Eagle has assembled the most complete package of A410MP 10 mm 18 0.69 25 0.98 40 1.58 commonly used screwdriver bits and nutsetters in the A412MP 12 mm 21 0.81 25 0.98 40 1.58 industry. Our goal is to supply you with the highest 3/4” Square Drive quality bits and nutsetters for all your fastener needs. L If you’re in electronics, aerospace, automotive, or A611/16 11/16” 30 1.18 44 1.73 50 1.97

SAE A63/4 3/4” 32 1.26 44 1.73 50 1.97

general industry, Eagle has ØtheD1 bits and nutsettersØD2 A613/16 13/16” 35 1.38 44 1.73 50 1.97 to fit your needs. A614 14 mm 24 0.95 38 1.50 55 2.17 TYPE A L A616 16 mm 27 1.06 44 1.73 50 1.97 METRIC A617 17 mm 30 1.18 38 1.50 55 2.17 L IMPACT SOCKETS ØD1 ØD2 Sq. 3/4” Square Drive, Deep ØD2 L A611/16-4 11/16” 31 1.22 44 1.73 100 3.94 TYPE A

SAE A63/4-4 3/4” 33 1.30 44 1.73 100 3.94 TYPE B L A613/16-4 13/16” 36 1.42 44 1.73 100 3.94 ØD1 ØD2 Sq. L A617-4 17 mm 31 1.22 44 1.73 100 3.94 H (6PT) A618-4 18 mm 32 1.26 44 1.73 100 3.94 ØD2 METRIC A619-4 19 mm 33 1.30 38 1.50 100 3.94 ØD1 ØD2 TYPE A Part No Hex D1 D1 D2 D2 L L TYPE B mm in mm in L mm in 1” Square Drive TYPE C Sq. L A87/8 7/8” 37 1.46 54 2.13 59 2.32 3/8” Square Drive H (6PT)

SAE A815/16 15/16” 38 1.50 54 2.13 59 2.32 A31/4 1/4” 10 0.39 19 0.75 34 Ø1.34D2 A81 1” 41 1.61 54 2.13 59 2.32 A35/16 5/16” 12 0.47 19 ØD1 0.75 34 ØD21.34

SAE A817 17 mm 31 1.22 50 1.97 63 2.48 A33/8 3/8” 15 0.59 19 0.75TYPE B34 1.34 A819 19 mm 33 1.30 50 1.97 63 2.48 A306 6 mm 10 0.39 19 0.75TYPE C 34 1.34 METRIC A821 21 mm 37 1.46 50 1.97 63 2.48 A307 7 mm 13 0.49 20 0.79 32 1.26 L METRIC A308 8 mm 14 0.55H 20 0.79 32 1.26 (6PT) QUICK CHANGE CHUCKS 3/8” Square Drive, Deep ØD1 ØD2 A307-2 7 mm 13 0.49 20 0.79 50 1.97 A307-2.75 7 mm 13 0.49 20 0.79 70 2.76 H Sq. A308-2 8 mm 14 0.55 20 0.79TYPE C50 1.97

3/8” Square Drive, Magnetic A31/4MP 1/4” 10 0.39 19 0.75 34 1.34 A35/16MP 5/16” 12 0.47 19 0.75 34 1.34 Part No Sq Hex D1 D1 L L SAE A33/8MP 3/8” 15 0.59 19 0.75 34 1.34 Drive mm in mm in A308MP 8 mm 14 0.55 20 0.79 32 1.26 ADC-2S 1/4” 1/4” 19 0.75 38 1.50 A310MP 10 mm 17 0.65 20 0.79 32 1.26 ADC-3S 3/8” 1/4” 20 0.79 42 1.65

METRIC A311MP 11 mm 17 0.65 19 0.75 34 1.34 ADC-4S 1/2” 1/4” 19 0.75 46 1.81 ADC-3SH7/16 3/8” 7/16” 25 0.98 46 1.81 ADC-4SH7/16 1/2” 7/16” 33 1.30 55 2.17 1/2” Square Drive A43/8 3/8” 16 0.63 25 0.98 38 1.50 L A47/16 7/16” 18 0.69 25 0.98 38 1.50 L1 SAE A41/2 1/2” 19 0.75 25 0.98 50 1.97 ALLEN SOCKETS

A408 8 mm 16 0.61 25 0.98 40 1.58 H Sq. A409 9 mm 16 0.63 25 0.98 40 1.58

METRIC Part No Hex L1 L1 L L A410 10 mm 18 0.69 25 0.98 40 1.58 mm in mm in

1/2” Square Drive, Deep 3/8” Square Drive A43/8-3.25 3/8” 17 0.67 25 0.98 82 3.23 A31/4C 1/4” 10 0.39 42 1.65

SAE A47/16-3.25 7/16” 19 0.73 25 0.98 82 3.23 A304C 4 mm 10 0.39 42 1.65 A41/2-3.25 1/2” 22 0.85 25 0.98 82 3.23 A410-2 10 mm 18 0.69 25 0.98 50 1.97 1/2” Square Drive A410-3 10 mm 18 0.69 25 0.98 75 2.95 A410-3.25 10 mm 17 0.67 25 0.98 82 3.23 A41/4C 1/4” 25 0.98 50 1.97 METRIC A411-3.25 11 mm 19 0.73 25 0.98 82 3.23 A405C 5 mm 25 0.98 50 1.97 Additional types and sizes of fastener tools are available upon request.

64 www.eagle-premier.com ACCESSORIES: BITS & SOCKETS

L L EXTENSIONS SOCKET ADAPTERS

L L M H H Sq. Sq. D

H Sq. Part No Square Hex L L D D Part No Female Male D D L L Drive mm in mm in Sq.Drive Sq.Drive mm in mm in A375E 3/8” 3/8” 75 2.95 20 0.79 A302A 3/8” 1/4” 22 0.87 35 1.38 A405E 1/2” 1/2” 51 2.01 30 1.18 A403A 1/2” 3/8” 25 0.98 37 1.46 A610E 3/4” 3/4” 100 3.94 44 1.73 A504A 5/8” 1/2” 35 1.38 47 1.46 A810E 1” 1” 102 4.02 54 2.13 A604A 3/4” 1/2” 38 1.50 53 2.09 A1220E 1-1/4” 1-1/4” 200 7.87 60 2.36 A806A 1” 3/4” 50 1.97 70 2.76 A1418E 1-1/2” 1-1/2” 178 7.01 84 3.31 A128A 1-1/4” 1” 60 2.36 76 2.99 A2426E 2-1/2” 2-1/2” 264 10.39 137 5.39 A#508A Spline #5 1” 60 2.36 90 3.54 BIT HOLDERS UNIVERSAL SOCKETS H Sq.

L L H D2

1/4 D1

Part No L L Part No Hex D1 D1 D2 D2 L L mm in mm in mm in mm in 1/4” Hex, Magnetic 3/8” Square Drive A3BHM-3 75 2.94 A310U 10 mm 16 0.63 20 0.79 55 2.17 A3BHM-4 100 3.94 A311U 11 mm 16 0.63 20 0.79 60 2.36 A3BHM-6 150 5.91 A3BHM-8 200 7.87 1/2” Square Drive A3BHM-10 250 9.84 A412U 12 mm 20.5 0.81 25 0.98 70 2.76 A413U 13 mm 19 0.75 24 0.95 70 2.76

Description of Bits and Nutsetters Part Number Nomenclature

Precedes Part Number Contained Within Part Number BITS BITS (Cont.) BITS

A3S = Phillips® Power Drive AM = Electric Type Slotted PZ = Pozidriv® A3W = Double Ended Phillips® ATW = ElectricType Tri-Wing® PZACR = Pozidriv® ACR® A38S = Phillips® Insert AT = Electric Hios Type Torx® SDV = Supadriv® ® A39S = Phillips® Insert Reduced Nose A26S = Electric Driver Phillips® TR = Torx Tamper Resistant ® A3M = Slotted Power Drive A26M = Electric Driver Slotted ACRI = ACR Installation ® A38M = Slotted Insert A26C = Electric Driver Allen Socket Head ACR = ACR Remove ACRB = ACR® 4x4 Both Install and Remove A3MT = Slotted Power Drive Reduced Nose A3BHM = Insert Bit Holder (Magnetic Type) E4 = Electric 4mm diameter A3C = Allen Socket Head Power Drive A3BHD = Insert Bit Holder (Non Magnetic) A38C = Allen Socket Head Insert E5 = Electric 5mm diameter RS = Reduced Shank A3R = Square Recess Power Drive NUTSETTERS A3RT = Square Recess Turned Down (Power) A38R = Square Recess Insert A3B = Nutsetter A3T = Torx® Power Drive A3BMP = Magnetic (MP) Pressed Type A38T = Torx® Insert A3BMS = Magnetic (MS) Spring Loaded A3TS = Torq-Set® Power Drive A3BMT = Magnetic (MT) Tube Type A38TS = Torq-Set® Insert A3BU = Universal Nutsetter A3TA = Triangle Power Drive A3TW = Tri-Wing® Power Drive MAG-O-NETS A38TW = Tri-Wing® Insert ® A7 = 7/16 Power Drive AM = AIMCO Mag-O-Net AS = Electric Type Phillips®

Additional types and sizes of fastener tools are available upon request.

www.eagle-premier.com 65 ACCESSORIES: BITS & SOCKETS

PHILLIPS POWER BITS NUTSETTERS

L L

H

Part No Point L L Part No Hex L L Size mm in mm in A3S0-2 0 50 1.97 A3B1/4-2 1/4” 50 1.97 A3S1-2 1 50 1.97 A3B1/4-2.5 1/4” 63 2.50 A3S1-2.75 1 70 2.76 A3B5/16-2 5/16” 50 1.97 A3S1-3 1 75 2.95 A3B5/16-2.5 5/16” 63 2.50 A3S1-3.5 1 90 3.54 A3B3/8-2 3/8” 50 1.97 A3S1-4 1 100 3.94 A3B3/8-2.5 3/8” 63 2.50 A3S1-6 1 150 5.91 A3B05-2.75 5 mm 70 2.76 A3S2-1.2 2 30 1.18 A3B55-1.2 5.5 mm 30 1.18 A3S2-1.6 2 40 1.57 A3B55-2.75 5.5 mm 70 2.76 A3S3-2 3 50 1.97 A3B55-4 5.5 mm 100 3.94 A3S3-2.75 3 70 2.76 A3B06-2.75 6 mm 70 2.76 A3B07-1.2 7 mm 30 1.18 Double-Ended A3B07-2 7 mm 50 1.97 A3B07-2.75 7 mm 70 2.76 A3B07-4 7 mm 100 3.94 L A3B08-1.2 8 mm 30 1.18 A3B08-2 8 mm 50 1.97 12 A3B08-2.75 8 mm 70 2.76 A3B08-4 8 mm 100 3.94 A3B08-6 8 mm 150 5.91 A3W1-3 1 75 2.94 A3B08-8 8 mm 200 7.87 A3W1-4 1 100 3.94 A3B09-2.75 9 mm 70 2.76 A3W2-2 2 50 1.97 A3B09-4 9 mm 100 3.94 A3W2-3 2 75 2.94 A3B10-1.2 10 mm 30 1.18 A3W2-4 2 100 3.94 A3B10-2 10 mm 50 1.97 A3W2-6 2 150 5.91 A3B10-2.75 10 mm 70 2.76 A3W2-8 2 200 7.87 A3B11-2.75 11 mm 70 2.76 A3W2-10 2 250 9.84 A3B12-1.2 12 mm 30 1.18 A3W2-12 2 300 11.81 A3B13-2.75 13 mm 70 2.76 A3W3-2 3 50 1.97 A3B14-2.75 14 mm 70 2.76 A3W3-3 3 75 2.94 A3B16-2.75 16 mm 70 2.76 A3W3-4 3 100 3.94 A3B17-2.75 17 mm 70 2.76 A3W3-6 3 150 5.91 A3W3-8 3 200 7.87

TORX POWER BITS

Part No Torx L L Additional types and sizes of fastener tools Size mm in are available upon request. A3T6-2 T6 50 1.97 A3T7-2 T7 50 1.97 A3T7-2.75 T7 70 2.76 A3T7-3.5 T7 90 3.54 For custom parts, please contact us A3T7-6 T7 150 5.91 A3T8-2 T8 50 1.97 for more information. A3T9-2.75 T9 70 2.76 1-800-852-1368 66 www.eagle-premier.com POWER TOOL SOLUTIONS REFERENCE MATERIALS

Conversion Charts ...... 66 Warranty Information ...... 67

POWER TOOL SOLUTIONS™ CONVERSION CHARTS

Fraction n Decimal n Metric Conversions (to .32)

Decimal mm Decimal mm Decimal mm Decimal mm

1/32 .03125 .7938 9/32 .28125 7.1438 17/32 .53125 13.4938 25/32 .78125 19.8438 1/16 .0625 1.5875 5/16 .3125 7.9375 9/16 .5625 14.2875 13/16 .8125 20.6375 3/32 .09375 2.3812 11/32 .34375 8.7312 19/32 .59375 15.0812 27/32 .84375 21.4312 1/8 .125 3.175 3/8 .375 9.525 5/8 .625 15.875 7/8 .875 22.225 5/32 .15625 3.9688 13/32 .40625 10.3188 21/32 .65625 16.6688 29/32 .90625 23.0188 3/16 .1875 4.7625 7/16 .4375 11.1125 11/16 .6875 17.4625 15/16 .9375 23.8125 7/32 .21875 5.5562 15/32 .46875 11.9062 23/32 .71875 18.2562 31/32 .96875 24.6062 1/4 .25 6.35 1/2 .5 12.7 3/4 .75 19.05 1 1.0 25.4

Thread Size to Hex Size

mm mm UNC Inches SAE Inches

M 2 4 M 27 41 1/4 7/16 1/4 7/16 M 2.3 4.5 M 30 46 5/16 1/2 5/16 1/2 M 2.6 5 M 33 50 3/8 9/16 3/8 9/16 M 3 5.5 M 36 55 7/16 11/16 7/16 5/8 M 3.5 6 M 39 60 1/2 3/4 1/2 3/4 M 4 7 M 42 65 9/16 7/8 9/16 7/8 M 5 8 M 45 70 5/8 15/16 5/8 15/16 (M 5-6) 9 M 48 75 3/4 1-1/8 3/4 1-1/16 M 6 10 M 52 80 7/8 1-5/16 7/8 1-1/4 M 7 11 M 56 85 1 1-1/2 1-1/8 1-7/16 M 8 13 M 60 90 1-1/8 1-11/16 1-1/4 1-13/16 (M 8) 14 M 64 95 1-1/4 1-7/8 1-3/8 2 M 10 16 M 68 100 1-3/8 2-1/16 1-1/2 2-3/16 (M 10) 17 M 72 105 1-1/2 2-1/4 M 12 18 M 76 110 1-3/4 2-5/8 (M 12) 19 M 80 115 2 3 M 14 21 M 85 120 2-1/4 3-3/8 (M 14) 22 M 90 130 2-1/2 3-3/4 M 16 24 M 95 135 M 18 27 M 100 145 M 20 30 M 105 150 (M 22) 32 M 110 155 M 22 34 M 115 165 M 24 36 M 120 170

Torque Conversion Factors

Units to be SAE METRIC INTERNATIONAL SYSTEM - S.I. Converted ozf-in lbf-in lbf-ft gf-cm kgf-cm kgf-m mNm cNm Nm

1 ozf-in = 1 0.0625 0.005 72 0.072 0.0007 7.062 0.706 0.007 1 lbf-in = 16 1 0.083 1152.1 1.152 0.0115 113 11.3 0.113 1 lbf-ft = 192 12 1 13826 13.83 0.138 1356 135.6 1.356 1 gf-cm = 0.014 0.0009 0.00007 1 0.001 0.00001 0.098 0.01 0.0001 1 kgf-cm = 13.89 0.868 0.072 1000 1 0.01 98.07 9.807 0.098 1 kgf-m = 1389 86.8 7.233 100000 100 1 9807 980.7 9.807 1 mN-m = 0.142 0.009 0.0007 10.2 0.01 0.0001 1 0.1 0.001 1 cN-m = 1.42 0.088 0.007 102 0.102 0.001 10 1 0.01 1 N-m = 141.6 8.851 0.738 10197 10.20 0.102 1000 100 1

68 www.eagle-premier.com WARRANTY INFORMATION

NEW TOOL AND ACCESSORY WARRANTY Any new tool or accessory branded with the Eagle name, and purchased from Eagle Group, Inc (EAGLE), or through one of its authorized distributors or agents, is warranted to the original buyer against defects in materials and workmanship for a period of one (1) year* from date of delivery. Under the terms of this warranty, EAGLE will repair or replace any product or accessory warranted hereunder and returned freight prepaid proving to EAGLE's satisfaction to be defective as a result of workmanship or materials. In order to qualify for this warranty, written notice to EAGLE must be given immediately upon discovery of such defect, at which time EAGLE will issue an authorization to return the tool. The defective item must be promptly returned to an authorized EAGLE service center with all freight charges prepaid.

REPAIRED TOOL WARRANTY Once a tool is beyond the new product warranty period, as detailed above, EAGLE will provide repair warranty on pneumatic tools for a period of 90 days* beyond the warrantied repair date.

EXCLUSION FROM WARRANTY This warranty is valid only on products purchased from EAGLE, or thru its authorized distributors or agents. EAGLE shall have no obligation pursuant to the EAGLE Warranty with respect to any tools or accessories which in EAGLE's sole judgment have been altered, damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer, or any other person other than an authorized representative of EAGLE, has made any attempt to service or modify the tool or accessory prior to its return to EAGLE under this Warranty.

The warranty provision with respect to each such product may be amended by EAGLE from time to time in its sole discretion. The liability of EAGLE hereunder shall be limited to replacing or repairing, at its option, any products which are returned freight prepaid to EAGLE and which EAGLE determines to be defective as described above or, at EAGLE's option, refunding the purchase price of such products.

EAGLE reserves the right to make periodic changes in construction or tool design at any time. EAGLE specifically reserves the right to make these changes without incurring any obligation or incorporating such changes or updates in tools or parts previously distributed.

THE EAGLE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, AND EAGLE EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY SETS FORTH THE SOLE AND EXCLUSIVE REMEDY IN CONTRACT, TORT, STRICT LIABILITY, OR OTHERWISE.

THIS WARRANTY IS THE ONLY WARRANTY MADE BY EAGLE WITH RESPECT TO THE GOODS DELIVERED HEREUNDER, AND MAY BE MODIFIED OR AMENDED ONLY BY A WRITTEN INSTRUMENT SIGNED BY A DULY AUTHORIZED OFFICER OF EAGLE.

LIMITATION OF LIABILITY EAGLE'S LIABILITY PURSUANT TO WARRANTY OF THE PRODUCTS COVERED HEREUNDER IS LIMITED TO REFUND OF THE PURCHASE PRICE. IN NO EVENT SHALL EAGLE BE LIABLE FOR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS BY THE BUYER. IN NO EVENT SHALL EAGLE BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR OTHER DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT) WHETHER OR NOT EAGLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED, WHETHER FOR BREACH OR REPUDIATION OF CONTRACT, BREACH OF WARRANTY, NEGLIGENCE OR OTHERWISE. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY ARISE OUT OF THIRD PARTY CLAIMS AGAINST BUYER. THE ESSENTIAL PURPOSE OF THIS PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EAGLE ARISING OUT OF THIS AGREEMENT AND/OR SALE.

Note: The EAGLE Warranty confers specific legal rights, however some states or jurisdictions may not allow certain exclusions or limitations within this warranty.

* All warranty periods addressed herein are determined using a standard shift, eight-hour work day.

EAGLE Attn: Service Department 10000 SE Pine Street Portland, OR 97216 877.273.3903

www.eagle-premier.com 69 NOTES

70 www.eagle-premier.com NOTES

www.eagle-premier.com 71 AIMCO CORPORATE HEADQUARTERS AIMCO CORPORATION DE MEXICO SA DE CV 10000 SE Pine Street Ave. Cristobal Colon 14529 Portland, Oregon 97216 Chihuahua, Chihuahua. 31125 Phone: (503) 254–6600 Mexico Toll Free: 1-800-852-1368 Phone: (01-614) 380-1010 Fax: (01-614) 380-1019

LIT-E100, REV 02/15, ©2015 AIMCO PRINTED IN THE U.S.A.