DOCSLIB.ORG

Ingersoll Rand Air Tool Guide at Airtoolpro.Com

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ingersoll Rand Air Tool Guide at Airtoolpro.Com AIR TOOL GUIDE Impact Wrenches Drills Sanders Proudly Distributed By Automotive Tools Construction Tools Pumps Compressors and more... 2 IMPACT WRENCH IMPACT WRENCH 3/8” Impact Wrench 212A 216B 2115TiMAX • Compact 3/8” Drive • Palm Grip 3/8” Drive • Ultimate Compact 3/8” Drive • Max Torque: 150 ft-lb • Max Torque: 200 ft-lb • Max Torque: 300 ft-lb • Handle Exhaust • Butterfly fwd/rev action • Adjustable Dial Power • Recessed Regulator Dial • Handle Exhaust Titanium • Handle Exhaust • Lightweight Composite Body 1/2” Impact Wrench 2125QTiMAX 131S-EA & 131S-2-EA 231C-AP 2130AP & 2130AP-2 • Ultimate Compact 1/2” Drive • Max Torque: 450 ft-lb (rev) • Max Torque: 600 ft-lb (rev) • 1/2” Drive • Max Torque: 332 ft-lb • Pressure Feed Lubrication • Pressure Feed Lubrication • Max Torque: 550 ft-lb • Adjustable Dial Power • Adjustable Power Regulator • Adjustable Power • Adjustable Dial Power • Handle Exhaust • Handle Exhaust Regulator • Handle Exhaust • Lightweight Composite Body • 2” Extended Anvil available • Front Exhaust • 2” Extended Anvil Model available • Lightweight Composite Body Quiet Tool 2131C 2135Qi 2135QTiMAX Up to 1100 ft-lb of 2135TiMAX & 2135Ti2MAX • 1/2” Drive • 1/2” Drive • Ultimate 1/2” Drive nut busting torque! • Ultimate 1/2” Drive Quiet • Max Torque: 600 ft-lb • Max Torque: 700 ft/lb • Max Torque: 780 ft-lb Tool • Max Torque: 780 ft-lb • Adjustable Dial Power • Seven Vane Motor • Adjustable Dial Power • Adjustable Dial Power • Handle Exhaust • Lightweight Composite Body • Handle Exhaust • Handle Exhaust • Lightweight Composite Body • Lightweight Composite Body • Quite Tool Techology • Lightweight Composite Body • 2135Ti-2MAX 2” Anvil 86 dbA (pressure) Quiet • Quite Tool Technology Tool 86dbA (pressure) Titanium 3/4” Impact Wrench 261 & 261-6 2141 259 2925P1Ti • 3/4” Drive • 3/4” Drive • 3/4” Drive • 3/4” Drive • Max Torque: 1100 ft-lb • Max Torque: 1200 ft-lb • Max Torque: 1050 ft-lb • Max Torque: 1450 ft-lb • Jumbo Hammer Power • Weighs just 3.2kg • Weighs 4.0kg • Twin Hammer Power • Adjustable Power • Handle Exhaust • Silenced Handle Exhaust • Adjustable Dial Power • Handle Exhaust • Only 208mm Long • Two Power Settings • Handle Exhaust • Pressure Feed Lubrication • Lightweight Composite Body • Rocking Dog Impact Mechanism • Corrosion Protector Titanium • Available with standard 3” or 6” Extension Anvil • New Silenced Model Available 2141S works well on a wide range of air pressures Recommended Min Hose Average Air Model Drive Free Speed Maximum Torque Weight Length Air Inlet Torque Size Consumption Pistol Grip in rpm Nm ft-lb Nm ft-lb kg mm in in lpm cfm 212A 3/8 10,200 205 150 27-170 20-125 1.66 203 1/4 3/8 71 2.5 216B 3/8 8,500 271 200 20-217 15-160 1.27 196 1/4 3/8 84 3 2115TiMAX 3/8 15,000 407 300 34-312 25-230 1.12 151 1/4 3/8 113 4 2125QTiMAX 1/2 15,000 450 332 34-340 25-251 1.14 155 1/4 3/8 113 4 131S-EA 1/2 8000 610 450 34-407 25-300 2.63 185 1/4 3/8 120 4.2 131S-2-EA 1/2 8000 610 450 34-407 25-300 2.80 235 1/4 3/8 120 4.2 231C-AP 1/2 8000 813 600 34-475 25-350 2.63 185 1/4 3/8 120 4.2 2130AP 1/2 9500 745 550 68-680 50-500 1.90 184 1/4 3/8 125 4.4 2130AP-2 1/2 9500 745 550 68-680 50-500 2.05 235 1/4 3/8 125 4.4 2131C 1/2 9500 816 600 68/544 50-400 2.00 180 1/4 3/8 136 4.8 2135Qi 1/2 9500 949 700 68-881 50-650 1.93 187 1/4 3/8 142 5 2135QTiMAX 1/2 9800 1054 780 68-880 50-650 1.83 186 1/4 3/8 142 5 2135TiMAX 1/2 9800 1054 780 68-880 50-650 1.79 187 1/4 3/8 142 5 2135Ti-2MAX 1/2 9800 1054 780 68-880 50-650 1.99 241 1/4 3/8 142 5 259 3/4 6000 1424 1050 272-1085 200-800 4.00 218 3/8 3/8 227 8 261 3/4 5500 1491 1100 272-1224 200-900 5.62 224 3/8 1/2 270 9.5 261-6 3/4 5500 1491 1100 272-1224 200-900 6.21 376 3/8 1/2 270 9.5 2141 3/4 8000 1627 1200 272-1224 200-900 3.20 208 3/8 1/2 270 9.5 2141S 3/4 8000 1627 1200 272-1224 200-900 3.20 208 3/8 1/2 270 9.5 2925P1Ti 3/4 5200 1966 (f) 1450 (f) 476-1496 (f) 350-1100 (f) 5.39 225 3/8 1/2 368 13 IMPACT WRENCH 3 IMPACT WRENCH 1” Impact Wrench 2150 2925P3Ti 2925B2Ti 631L • 1” Drive • 1” Drive • 1” Drive • 1” Drive & 8” Anvil • Max Torque: 1200 ft-lb • Max Torque: 1450 ft-lb • Max Torque: 1450 ft-lb • D Handle Outside Trigger • Weighs just 3.4kg • 4 Positional Power Dial • Twin Hammer Power • 4 Position Power Regulator • Handle Exhaust • Twin Hammer Power • 7 Vane Motor Titanium • High Torque: 3,172 ft-lb • Only 208mm Long • Handle Exhaust • 4 Positional Power Dial • Corrosion Protection Titanium • Corrosion Protection 285B & 285B-6 2940P2 2940B2 631S • 1” Drive • Pistol Grip • 1” Drive • 1” Drive • Max Torque: 1450 ft-lb • Max Torque: 2000 ft-lb • Max Torque: 2000 ft-lb • D Handle Outside Trigger • Side Handle • 1” Drive • Twin Hammer • 4 Position Power Regulator • 4 Position Power Regulator • Twin Hammer • Pressure Feed Lubrication • High Torque: 3,172 ft-lbs • Angled Down Exhaust • Power IR Industrial Grade Tool • 360 degree Swivel Inlet • For the toughest 1” Drive applications 1 This range is 1 /2” Impact Wrench equivalent to the 3942B2Ti 2950B7 3955B2Ti heaviest duty available • Twin Hammer • 1-1/2” Sq Drive Impact • 1-1/2” Drive Impact from most other air tool • 1” Drive • Max Torque: 3,000 ft-lb • Titanium Hammer Case manufacturers! • 3940B2Ti Max: 2500 ft-lb • Twin Hammer • Max Torque: 5,000 ft-lb • 3942B2Ti Max: 2750 ft-lb • Pressure Feed Lubrication • Weighs just 15.7kg PERFECT FOR • Feature the strongest, longest life • 7 Vane Motor mechanism in the world* • Bronze Endplates TRUCK REPAIRS & Titanium CONSTRUCTION WORK Titanium Min Hose Average Air Model Drive Free Speed Maximum Torque Recommended Torque Weight Length Air Inlet Size Consumption in rpm Nm ft-lb Nm ft-lb kg mm in in lpm cfm Pistol Grip 2150 1 8000 1627 1200 274-1224 200-900 3.40 208 3/8 1/2 270 9.5 2925P3Ti 1 5200 1966 (f) 1450 (f) 476-1496 (f) 350-1100 (f) 5.40 225 3/8 1/2 368 13 2940P2 1 4000 2710 2000 1360-2169 1000-1600 10.40 251 1/2 3/4 368 13 D-Handle 2925B2Ti 1 6500 2169 (f) 1600 (f) 475-1900 (f) 350-1400 (f) 6.35 314 3/8 1/2 368 13 285B 1 5000 2000 1475 136-1220 100-900 11.16 335 1/2 1/2 283 10 285B-6 1 5000 2000 1475 136-1220 100-900 12.61 511 1/2 1/2 283 10 631L 1 3500 4300 3172 271-3390 200-2500 16.60 624 1/2 1/2 427 15 631S 1 3500 4300 3172 271-3390 200-2500 14.50 432 1/2 1/2 427 15 2940B2 1 5000 2710 2000 1360-2170 1000-1600 9.98 311 1/2 3/4 368 13 3942B2Ti 1 5000 4406 3250 1356-2644 1000-1950 10.50 362 1/2 3/4 594 21 D-Handle 2950B7 1-1/2 3750 4067 3000 2170-3390 1600-2500 14.80 368 1/2 3/4 427 15 3955B2Ti 1-1/2 2750 6779 5000 2170-5288 1600-3900 15.70 419 1/2 3/4 481 17 SPARK PROOF Pistol Grip 2131PSP 1/2 9500 816 600 68-544 50-400 2.00 180 1/4 3/8 136 4.8 2141PSP 3/4 7250 1627 1200 271-1220 200-900 3.20 208 3/8 1/2 270 9.5 2151P1SP 1 7250 1627 1200 271-1220 200-900 3.40 208 3/8 1/2 270 9.5 D-Handle 2940B2SP-EU 1 5000 2710 2000 1360-2170 1003-1600 12.90 311 1/2 3/4 368 13 * Source: IR Australia (f) All models are reverse bias except the 2925 series which are forward bias. Specifications are a guide only and can be subject to change without notice. 4 IMPACT WRENCH & IMPACT WRENCH KITS IMPACT WRENCH Fully certified to ATEX Directives, these are the tool of choice for specialised application within the petrochem and mining industries, and in any production or processing areas where hazardous atmospheres can occur. Spark Proof Series Impactools 2131PSP 2141P1SP 2151P1SP 2940B2SP-EU • 1/2” Square Drive Impact Wrench • 3-4” Square Drive Impact Wrench • 1” Square Drive Impact Wrench • 1” Square Drive Impact Wrench • High Output Twin Hammer • High Output Twin Hammer • High Output Twin Hammer • 6 Vanes, High Output Air Motor • Pressure Feed Lubrication • Pressure Feed Lubriction • Pressure Feed Lubriction • High Output Twin Hammer • Reverse Biased Motor Cylinder • 6 Vanes, High Output Air Motor • 6 Vanes, High Output Air Motor • Bronze Endplates • One Hand Operation (fwd/rev) • One Hand Operation (fwd/rev) • 360 degree Swivel Inlet • Proven Reliability and Long Life • 360 degree Swivel Inlet • 360 degree Swivel Inlet • Bronze Endplates • In Handle Exhaust • Bronze Endplates • In Handle Exhaust • In Handle Exhaust Square Free Maximum Torque Forward Torque Min Hose Average Air Model Style Weight Length Air Inlet Drive Speed Reverse Range Size Consumption in rpm ft-lb ft-lb kg mm in in lpm cfm 2131PSP Pistol 1/2 9500 600 50-400 2.0 175 1/4 3/8 136 4.8 2141PSP Pistol 3/4 7250 1200 200-900 3.2 208 3/8 1/2 270 9.5 2151P1SP Pistol 1 7250 1200 200-900 3.2 208 3/8 1/2 270 9.5 2940B2SP-EU In-Line Inside Trigger 1 5000 2000 1003-160 12.9 311 1/2 3/4 368 13 IMPACT WRENCH KITS We’ve gone one step further and created the perfect match..
Load more

Recommended publications
  • Noise Pollution and Control in Wood Mechanical Processing Wood Industries
    Preprints (www.preprints.org) | NOT PEER-REVIEWED | Posted: 31 August 2016 doi:10.20944/preprints201608.0236.v1 Review Noise Pollution and Control in Wood Mechanical Processing Wood Industries Mayowa Jacob Owoyemi 1,*, Babajide Charles Falemara 2 and Ayomide Joseph Owoyemi 3 1 Forestry and Wood Technology, Federal University of Technology, Akure, Nigeria 2 Forestry Technology Department, Federal College of Forestry, Jos, Plateau State, Nigeria; [email protected] 3 College of Medicine, University of Lagos, Lagos, Nigeria; [email protected] * Correspondence: [email protected] Abstract: High level of noise is a disturbance to the human environment. Noise in industries is also an occupational hazard because of its attendant effects on workers’ health. Noise presents health and social problems in industrial operations, and the source is related to the machineries used in the industries. One of the unique features of the noise associated with wood machinery is the level of exposure and duration. Equipment used in a factory can be extremely loud. They can produce noise at decibels high enough to cause environmental health and safety concerns. The mechanically driven transport and handling equipment, cutting, milling, shaping and dust extractor installations in the wood industry generate noise. The sources of noise pollution have increased due to non-compliance with basic safety practices. The increased use of locally fabricated machine in the industry has increased the level of noise and vibration. The effects of industrial noise pollution as discussed include: increase in blood pressure; increased stress; fatigue; vertigo; headaches; sleep disturbance; annoyance; speech problems; dysgraphia, which means reading/learning impairment; aggression; anxiety and withdrawal.
    [Show full text]
  • The Leading Manufacturer of Forged Hand and Power Tools Accessories Since 1946
    122806_A_AJAX_ATW-lisa 7/17/12 8:20 PM Page 1 The Leading Manufacturer of Forged Hand and Power Tools Accessories Since 1946 TM Phone: 800.323.9129 • Fax: 800.424.2529 122806_A_AJAX_r3.qxp_AJAX 7/25/12 11:59 AM Page 3 Phone: 800.323.9129 • Fax: 800.424.2529 www.ajaxtools.com ZIP GUN CHISELS & ACCESSORIES WELD FLUX CHISELS & ACCESSORIES CHIPPING HAMMER TOOLS & ACCESSORIES BERYLLIUM COPPER SAFETY TOOLS RIVET BUSTER TOOLS & ACCESSORIES PAVING BREAKER TOOLS DRILL STEEL TOOLS ELECTRIC HAMMER TOOLS RIGGER TOOLS HAND TOOLS WEDGES, LINE UP PINS & SCRAPERS DEMOLITION TOOLS TM Wear Safety Goggles 4 122806_A_AJAX_ATW-lisa 7/17/12 8:20 PM Page 5 23⁄8" 3 .495" 111⁄16" .495" 2 ⁄8" 60mm 51⁄64" 15⁄16" 60mm 13⁄4" 17 ⁄32" .485" 44.4mm .580" 15⁄32" .469" 14.7mm .576" .680" .680" .576" 17.2mm 17.2mm .812" .812" 3 3 20.6mm 2 ⁄8" 3⁄8" 13 9 20.6mm 23⁄8" ⁄8" 60.3mm ⁄16" ⁄16" .495" 19⁄32" 29⁄32" 9.5mm 9.5mm 60.3mm 3 4 1⁄2" sq. 1⁄4" 1⁄4" 1 ⁄ " .360" Ø .415" 44.4mm .580" .425" 1 14.7mm Ø .373" .576" 1 ⁄8" .680" 13⁄16" 11⁄8" 13⁄16" 28.5mm 17.2mm 20.6mm 28.5mm 20.6mm 21⁄2" 1 4 21⁄2" 11⁄4" 1 5 1 ⁄ " 3⁄8" 63.5mm 3 1 ⁄4" REF 1 ⁄64" 32mm 63.5mm 32mm ⁄8" .620" 9.5mm 13⁄4" 9.5mm .354" .919" 1" 3⁄8" .375" .610" 44.4mm 13 13 .576" .680"
    [Show full text]
  • 320711 Brehe Auction
    TAYLOR ESTATE AUCTION Kelly Taylor, Personal Representative for the Louis Taylor Estate, will sell the personal property of the estate at public auction on: SATURDAY, OCT. 14, Beginning at 9 AM Location: 7810 Highway H, Gerald, MO 63037 Directions: From Highway 50 in Gerald, go south on Highway H 1.5 miles to auction. Roads will be marked day of sale. TRACTORS/IMPLEMENTS (will sell at 1 PM) Massey Ferguson 150 gas tractor-Hi/ Low transmission-good tires-3,100 hours-with heavy duty hydraulic skidder winch, Ford Ferguson Sys- tem 8N tractor-good rear tires, hy- draulic wood splitter, 6’ pull-type Brush Hog brand brush hog, (2) 3 pt. carryalls, section harrow, heavy duty pallet forks for loader, draw bar, sway bars, cylinder, tractor lights. GUNS/DEER MOUNTS/HUNTING (will sell at noon) Mossberg 500 12 ga. pump shotgun, Remington 870 12 ga. with Black Hawk tactical stock, Mossberg 185D 20 ga. bolt action shotgun, Winchester 37 steel frame 12 ga. Revelation 350 410 ga. shotgun, Ru- ger 77 30-06 with 3x9 scope, Savage 99 250-3,000, Savage 99 30/30 carbine, Savage Axis 250-3,000 with Bushnell 4x12 varmint scope, Ithaca Lightning .22, Winchester 190 .22 rifle, Marlin Glenfield 60 .22 rifle, RG Model 14 .22 pistol, Heritage Rough Rider .22 with holster, Ruger Super Black Hawk .44 Mag-New, Taurus Slim 9MM-New, Smith & Wesson M&P 9MM pistol-New, gun cleaning supplies, 8-gun cabinet, (3) 8-point deer mounts, lot fishing rods-reels, fishing nets, lot various sizes leg traps, gig.
    [Show full text]
  • Section V - Air & Power Tools
    Section V - Air & Power Tools SECTION V - TABLE OF CONTENTS A Section V Contents: B Routers, → Routers.......................................................2-6 pages V-2 - V-6 C Sanders, Air............................................6-11 Sanders, Electric...................................11-14 D Drills & Air Hammers...........................15-17 Pinners, Staplers and Nailers..............18-20 EE Air Tool Oil and Blow Guns................21-23 FF Air Tool Fittings.....................................24-25 ↑Sanders, Air & Electric → Air Line Accessories.............................26-28 pages V-6 - V-14 G Air Hose and Fittings........................... 28-29 Dust Extractors..................................... 30-31 H Inspection Lighting.....................................32 Heat Guns................................................. 33 I Domino and Biscuit Joiners................. 34-35 Jigsaws................................................. 36-37 J Track Saws and Accessories...............38-39 KK Miter and Table Saws, Planers.................40 L MM Belt Sanders, → ↑ Staplers, Pinners & Nailers, page V-14 NN pages V-18 - V-20 OO PP Dust Extraction, → QQ page V-30 - V-31 R S Drills, ↑ T pages V-15 - V-17 U V WW XX Y Air Tools & Hose Fittings, Track Saws, page V-38 ↑ Joiners, pages V-34 - V-35 ↑ ↑ pages V-24 - V-29 800-289-2237 • WWW.WURTHBAERSUPPLY.COM • WÜRTH BAER SUPPLY V - 1 Section V - Air & Power Tools A ROUTERS B Colt™ Palm Router, 1 HP • Variable speed dial is conveniently mounted on top of the tool body C • Simple depth adjustment, just align and lower the motor and then lock the router in position with D the clamping level • Micro-fine adjustments via wheel on the back of the router’s base E • Accepts standard 1/4 In. bits with max cutter diameter of 1-5/16” • Includes: Fixed Base, 1/4 In.
    [Show full text]
  • HHE Report No. HETA-2001-0073-2869, City of Cincinnati Sewers, Water Works & Public Services, Cincinnati, Ohio
    ThisThis Heal Healthth Ha Hazzardard E Evvaluaaluationtion ( H(HHHEE) )report report and and any any r ereccoommmmendendaatitonsions m madeade herein herein are are f orfor t hethe s sppeeccifiicfic f afacciliilityty e evvaluaaluatedted and and may may not not b bee un univeriverssaallllyy appappliliccabable.le. A Anyny re reccoommmmendaendatitoionnss m madeade are are n noot tt oto be be c consonsideredidered as as f ifnalinal s statatetemmeenntsts of of N NIOIOSSHH po polilcicyy or or of of any any agen agenccyy or or i ndindivivididuualal i nvoinvolvlved.ed. AdditionalAdditional HHE HHE repor reportsts are are ava availilabablele at at h htttptp:/://ww/wwww.c.cddcc.gov.gov/n/nioiosshh/hhe/hhe/repor/reportsts ThisThis HealHealtthh HaHazzardard EEvvaluaaluattionion ((HHHHEE)) reportreport andand anyany rreeccoommmmendendaattiionsons mmadeade hereinherein areare fforor tthehe ssppeecciifficic ffaacciliilittyy eevvaluaaluatteded andand maymay notnot bbee ununiiververssaallllyy appappapplililicccababablle.e.le. A AAnynyny re rerecccooommmmmmendaendaendattitiooionnnsss m mmadeadeade are areare n nnooott t t totoo be bebe c cconsonsonsiideredderedidered as asas f fifinalnalinal s ssttataatteteemmmeeennnttstss of ofof N NNIIOIOOSSSHHH po popolliilccicyyy or oror of ofof any anyany agen agenagencccyyy or oror i indndindiivviviiddiduuualalal i invonvoinvollvvlved.ed.ed. AdditionalAdditional HHEHHE reporreporttss areare avaavaililabablele atat hhtttpp::///wwwwww..ccddcc..govgov//nnioiosshh//hhehhe//reporreporttss This Health Hazard Evaluation
    [Show full text]
  • Larsenauction 6-4-16.Pmd
    AUCTION The following items will be offered for sale at public auction to be held in the Friend Community Building in Friend, NE on: Saturday, June 4, 2016 Starting at 10:00 a.m. - Lunch stand on grounds Paddleboat Trailers Paddleboat w/Canopy, 1 yr. old, seats 4 Ford Pickup Box Trailer Near New Condition 4’ x 3’ Utility Trailer Woodworking & Shop Tools Craftsman “DRM 500” Riding Mower, 9 hp w/Bagger DeWalt 740 10" Radial Arm Saw Older Craftsman Table Saw w/Stand Craftsman Jointer/Planer w/Stand Delta Scroll Saw w/Stand Hawk Mo. 214 Precision Scroll Saw w/Stand Craftsman Belt & Disc Sander w/Stand (3) 8’ Work Benches Tall 24 Drawer Parts Cabinet ½ hp Bench Grinder w/Stand Craftsman & Wards Bench Grinders Comet Port. Air Compressor Craftsman Router Recreater (3D Reproductions) w/Stand 4’ x 4’ Shop Table w/Drawers; Wooden Shelves; Craftsman Multi Sander; (4) Craftsman Routers; Porter-Cable Router; Craftsman ¼ Sheet Finish Sander; Craftsman 6" Grinder; Craftsman 9" Buffer/Polisher; Craftsman 12v Cordless Drill; Craftsman 7 ¼” Circular Saw; Makita 4" Grinder; B&D 3/8 Rech. Drill; B&D ¼” Drill; B&D Finish Sander; Dremel Contour Sander; Roto-Zip Tool; Skil & Wen 7 1/4" Circular Saws; Shopmate 5 ½” Circular Saw; Jig Saws; Skil Belt Sanders; Other Elec. Saws, Sanders, Drills, Etc.; Shop Vac; Large Selection of Petersen Vise Grips (all sizes); Vise Grip Welding Clamps; Socket Sets; Large “Lowell #40” Ratchet; 18" Crescent Wrench; Other Crescent Wrenches; Sets of Comb. Wrenches; Older Snap-On Toolbox; Other Toolboxes; Starrett Dial Indicator; S-K Swivel Sockets; Rigid Tubing Cutter; Rigid Alum.
    [Show full text]
  • Air Hammer Safety and Operational Procedure General A
    Armstrong Hall of Engineering Artisan and Fabrication Laboratories (AFL) Short Barrel Air Hammer Safety and Operational Procedure General A. Operate only with your instructor’s permission and after you have received instruction. B. Remove jewelry, eliminate loose clothing, and conne long hair. C. Make sure all guards are in place and operating correctly. D. Always use proper eye protection. E. Report any broken or non working parts to the Supervisor or TA. F. Report any cuts or injuries no matter how small they are. 1. Never lift or carry any pneumatic tool by the air hose. 2. Be sure to disconnect the air supply when changing or loading the chisels. 3. Lubricate tool before each use. 4. To load a chisel use the rear tab, remove spring retainer 5. Place chisel in hammer, slide spring over chisel 6. Using front tab, tightly install spring retainer over chisel. 7. Connect hammer to air supply. 8. Air supply should be set to 90 PSI. Retaining spring Trigger Switch Handle grip Air inlet Armstrong Hall of Engineering Artisan and Fabrication Laboratories (AFL) Safety and Operational Procedure Chop Saw General A. Operate with your instructor’s permission and after you have received instruction. B. Remove jewelry, eliminate loose clothing, and conne long hair. C. Make sure all guards are in place and operating correctly. D. Always use proper eye protection. E. Report any broken or non working parts to the machines F. Report any cuts or injuries no matter how small they are. 1. Before using, inspect the wheel for cracks or aws. If such a crack or aw is evident discard the wheel.
    [Show full text]
  • Woodworking Machinery Catalogs Manuals Parts
    WOODWORKING MACHINERY CATALOGS MANUALS PARTS LISTS COMPANY PUBLICATIONS TEXTS Mr. Dana Martin Batory, 402 E. Bucyrus St., Crestline, OH 44827 Order By Full Title And Date Postage Paid Within U.S. Outside U.S. Add $3.50 Per Item No Minimum Order NO PHONE CALLS PLEASE U.S. Funds Only Money Orders Preferred Allow Three Weeks For Delivery Web Catalog Updated Quarterly—Jan.1, April 1, July 1 & Oct. 1 Master List Updated Daily Listings & Prices Valid Only Through January, 2018 Current Master List Available As CD Copy Only (Word 2000) $7.50 PLEASE NOTE: Quality of photocopies is dependent on the quality of the original or master copy. Age, paper quality, condition, ink colors, printing, etc., are all contributing factors. Therefore photocopies are sold “as is” with No returns accepted. Pagination: Page numbers listed represent the number of pages making up the document not necessarily the actual number of photocopy pages. Unfortunately, I lack both the time and expertise to serve as an appraiser or broker. Nor to give advice on locating or fabricating replacement parts. In order to continue my definitive history series on American manufacturers of woodworking machinery, I’m interested in acquiring by loan, gift, or photocopy, any and all documents, catalogs, manuals, photos, trade journals, personal reminiscences, etc., pertaining to woodworking machinery and/or their manufacturers, past or present. All assistance will be acknowledged in print. Loaned material will be treated with care and promptly returned. WRITE with particulars. 2 Cir.=Circular/Bul.=Bulletin/Bro.=Brochure
    [Show full text]
  • Hydraulic Hammer Drilling Technology to Replace Air Hammer Drilling in Deep BHE Design
    Hydraulic Hammer Drilling Technology to Replace Air Hammer Drilling in Deep BHE Design The design of the drilling and completions for a building renovation at the Technische Universität Darmstadt Michael John Thompson ______________________________________________________ Hydraulic Hammer Drilling Technology to Replace Air Hammer Drilling in Deep BHE Design Design of the drilling and completions for a building renovation at the Technische Universität Darmstadt Michael John Thompson A 30 ECTS credit units Master´s thesis Supervisors Prof. Dr. Ingo Sass Dipl. Ing. Sebastian Homuth A Master´s thesis done at RES | The School for Renewable Energy Science in affiliation with University of Iceland & University of Akureyri & Technische Universität Darmstadt Akureyri, February 2010 Hydraulic Hammer Drilling Technology to Replace Air Hammer Drilling in Deep BHE Design Design of the drilling and completions for a building renovation at the Technische Universität Darmstadt A 30 ECTS credit units Master´s thesis © Michael Thompson, 2011 RES | The School for Renewable Energy Science Solborg at Nordurslod IS600 Akureyri, Iceland Telephone + 354 464 0100 www.res.is Printed in February 18 th , 2011 at Stell Printing in Akureyri, Iceland ABSTRACT The following thesis addresses a few of the issues surrounding the geothermal energy sector of the renewables movement; how to drill deeper in order to utilize important geothermal potential? And, what to do with that potential once the depths have been reached? In order to arrive at this answer, a project originating at TU Darmstadt was taken as the main topic of interest for the analysis. The project is the design of drilling and completions for a deep borehole geothermal heat exchanger in the renovation of a building on campus.
    [Show full text]
  • Equipment Rental Yard in Redding, CA
    10/01/21 06:30:24 Equipment Rental Yard in Redding, CA Auction Opens: Tue, Apr 21 10:00am Auction Closes: Thu, Apr 23 10:00am Lot Title Lot Title 101 Snapper Tiller 134 Universal 150,000 BTU Portable Heater 102 Power Rake - Billy Goat Lawn Thatcher (Inoperable Igniter) 103 Tiller with Briggs and Stratton Motor 135 Universal 150,000 BTU Portable Heater II 104 Aerator with Honda Motor 136 Portable Heater 105 50 Foot Electric Plumbing Snake 137 Extension Cord 106 100 Foot Electric Plumbing Snake 138 Double Lamp Flood Light with Stand 107 25 Foot Electric Plumbing Snake 139 Floor Machine with (2) Brushes 108 Shark Pressure Washer, 3000 PSI 140 MK 851 Tile Cutter 109 Shark Pressure Washer, 2200 PSI 141 (90) Folding Chairs 110 Compac Towable with Honda Motor 142 (11) 8 FT Folding Tables 111 Sheetrock Jack 143 Double Bed Roll-A-Way 112 Panel Lift Sheetrock Jack 144 Universal 150,000 BTU Portable Heater III 113 MK Concrete Saw 145 Canopy, 15 FT x 15 FT 114 MK Concrete Saw with Honda 9.0 Motor 146 Sign - Men Working 115 Husqvarna Sod Cutter 147 Sign - Men Working II 116 Wacker Vibra Plate WP1550AW 148 RYAN Sod Cutter 117 MQ Vibra Plate 149 Patton 3-Blade Portable Fan 118 (9) 2in Discharge Hoses, Various Lengths 150 Ground Fault Interrupter 119 (4) Discharge Hoses, Various Lengths 151 Ground Fault Interrupter II 120 (11) 3in Hoses, Various Lengths 152 Penco Auger Bit, 3 FT x 4 IN 121 Engine Stand - 1000 LB Capacity 153 Auger Bit, 3 FT x 4 IN 122 (3) Suction Hoses 154 Penco Auger Bit, 3 FT x 4.5 IN 123 Yellow Dolly 155 Penco Auger Bit, 3 FT x 2
    [Show full text]
  • Notice of Rule Making Hearing
    Page 1 of 22 pages Rulemaking Hearing Rules of Tennessee Department of Labor and Workforce Development Prevailing Wage Commission Chapter 0800-3-2 Prevailing Wage Commission Rules Amendments Rule 0800-3-2-.01 Definitions is amended by deleting the rule in its entirety and substituting the following language, so that as amended the rule shall read: 0800-3-2-.01 Definitions. (1) The terms below shall have the following clarifying definitions in addition to those contained in T.C.A. §12-4-402 of the Prevailing Wage Act, for the purpose of construing the Act and these rules and regulations: (a) "Apprentices" means those persons registered individually under a bona fide apprenticeship program registered with the Bureau of Apprenticeship and Training of the United States Department of Labor. The state agency contracting officer shall require the contractor or subcontractor using the apprentice to submit evidence of his indenture and/or apprenticeship registration when the apprentice's name first appears on a submitted payroll. (b) "Commission" means the Prevailing Wage Commission or its administrative delegate, the Tennessee Department of Labor and Workforce Development. (c) "Covered Worker" means all workers employed on State construction projects as defined by T.C.A. §12-4-402(6). (d) "Subcontractor" means one who performs part of the job called for in the prime contract. This term shall include materialmen whose employees engage in the substantial operations at the project site, provided the employees of the materialmen devote as much as
    [Show full text]
  • Pneumatic Tools
    Pneumatic Tools Introduction Pneumatics refers to technology dealing with the application of pressurized gas (potential energy) to produce mechanical motion (kinetic energy). Pneumatic systems used in the fire/rescue service primarily use compressed gas as the source of power. There is a variety of pneumatic tools used in the fire/rescue service, each with a specific function. While some of these tools were developed specifically for rescue, many are simply borrowed from other industries, such as the automotive repair industry. All of the components of a pneumatic tool setup will be discussed in this module, starting with the air source and working downstream to the actual tool. Air Sources The key component to any pneumatic tool or airbag operation is compressed air. Compressed air can be obtained from a variety of sources on a rescue incident: Air Compressors Air compressors provide an unlimited supply of air. The most common type is the positive- displacement compressor that uses a reciprocating piston. (Other types that utilize impellers or rotary screws do exist.) The piston air compressor has components similar to an internal combustion engine: a crankshaft, connecting rod and piston, cylinder and a valve head. Typical compressors come in 1- or 2-cylinder versions and can be single- or two-stage. The compressor supplies a storage tank. When needed, air is drawn from the tank and the compressor replenishes it. Air compressors stop supplying the storage tank when pressure inside the tank reaches a specified limit. When air is consumed and the pressure in the storage tank drops below a certain level, the compressor starts up again.
    [Show full text]