DOCSLIB.ORG

EDAG Group Company Presentation

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
EDAG Group Company Presentation EDAG Group Partner to the International Mobility Industry Agenda Presentation of the EDAG Group 1 Expertise - Key figures - Sites Range of EDAG Services 2 Portfolio and References Why choose EDAG? 3 Innovations, Awards, Certification Page 2 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Development with passion – that's what we stand for EDAG. One of the largest independent engineering experts in the automotive industry „ We are the experts in the development of vehicles, production plants and the optimisation of your processes. We see mobility as an integral approach. „ Our expertise covers the integrated development and optimisation of vehicles, production facilities, derivatives and modules. This has made us what we are today: the acknowledged, independent engineering experts for the automotive industry. Page 3 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Our history Founding of the Horst Germany: ATON Group Acquisition of the BFFT Eckard design office 10 facilities close to becomes the main Group in Groß-Zimmern the major automobile shareholder of manufacturers EDAG. 1969 1995 2006 2013 1970 1987 2012 2016 Foundation of First steps toward Acquisition of New technology company globalisation, first Rücker Group centre with room for headquarters in European subsidiary in with 2500 1500 employees is Fulda Barcelona employees built in Wolfsburg 49 years' experience in automotive engineering! Page 4 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. The Executive Board of EDAG Engineering GmbH Harald Poeschke Cosimo De Carlo Jürgen Vogt COO CEO CFO Page 5 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. EDAG Worldwide Sales / project office Locations Company headquarters Gothenbur g Helmond Kaluga Royal Warsaw Leamington Spa Mladá Boleslav Troy Wiesbaden Prague Changchun Belmont Arbon Györ Turin Seoul Yokohama Spartanburg Sant´Agata B. Barcelona Shanghai New Delhi Guangzhou Puebla Pune Kuala Lumpur São Paulo 8,235 EDAG employees 717 million euros of total sales revenue in 2017 Page 6 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. EDAG in Germany Company headquarters 100/500/1000 employees SCHLESWIG- HOLSTEIN more than MECKLENBURG- Hamburg WEST POMERANIA HAMBURG BREMEN Bremen BRANDENBURG 26 LOWER SAXONY BERLIN Locations Wolfsburg Berlin NORTH RHEIN- Hanover WESTPHALIA SAXONY- ANHALT Recklinghausen Dortmund Leipzig Cologne Eisenach SAXONY Aachen Fulda THURINGIA HESSE more than RHEINLAND- Wiesbaden PALATINATE Rüsselsheim BAVARIA SAARLAND Neckarsulm Regensburg Wörth 6,000 Gaimersheim Ingolstadt Weissach Employees Sindelfingen Ulm Böblingen Munich BADEN- WÜRTTEMBERG Weingarten Friedrichshafen Page 7 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Product Development Business Models Cooperation between the Subsidiaries Complexity Business development & Complete vehicle consulting development Focus of the Fulda site Engineering services Module development Focus of the subsidiaries Assumption of responsibility Page 8 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Agenda Presentation of the EDAG Group 1 Expertise - Key figures - Sites Our range of services 2 Portfolio and References Why choose EDAG? 3 Innovations, Awards, Certification Page 9 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Our range of services Picture? Page 10 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Company Structure and Segments of the EDAG Group EDAG Engineering Group AG Switzerland EDAG Engineering GmbH Directors: Cosimo De Carlo – CEO, Harald Poeschke – COO and Jürgen Vogt – CFO EDAG Vehicle Engineering EDAG Production Solutions EDAG Electrics/Electronics Vehicle development Development of production facilities Electrical/electronic development, car IT Page 11 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering „ We provide extensive expertise for complete vehicle development as a one-stop solution. „ When it comes to the development of bodywork systems and vehicle interiors, EDAG is a strong and innovative partner in every respect – with a special emphasis on complete vehicle development. Page 12 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering DESIGNCONCEPTS EDAG Design Studio Surface development Model Building The final result of the design Our surface simulation team Our model making centres create process must be to strengthen creates photorealistic images and high-precision physical models of your brand. scenarios of the vehicles of your future vehicles. tomorrow. Mobile show and concept . Design brand strategy (DNA) . Class- A surfaces concept cars . Design ideas through to volume production . Design models . Product conception and design . Form finding in clay visualisation (2D, 3D, VR) WeWe create create visions visions that canthat be can developed be developed into vehicles into vehicles that meet the demands of the future. that meet the demands of the future. Page 13 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering Vehicle Development Concept Development and Vehicle Body and Door Systems InteriorInterior andand exteriorexterior Package Our primary target is to achieve TheThe designdesign ofof youryour vehiclevehicle brandbrand Our task in the package is optimum product properties at shouldshould bebe immediatelyimmediately recognisablerecognisable to optimise the arrangement of minimum cost and weight. fromfrom itsits interiorinterior andand exterior.exterior. components and modules according to geometric and . Concept and series development functional requirements. Development and .. ConceptConcept andand seriesseries developmentdevelopment supplier management .. DesignDesign validationvalidation andand preparationcreation of . Complete vehicle package . Lightweight design / hybrid oftechnical technical specifications specifications . Ergonomic analysis material selection .. SupplierSupplier managementmanagement andand . Platform and modular product changechange managementmanagement concepts We provide extensive development expertise as a one- stop solution. Our unique quality is the fact that we specialise in complete vehicle development. Page 14 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering Function Development Chassis and Powertrain Vehicle safety Aerodynamics, Acoustics, Excellent vehicle dynamics and We achieve "integral safety" - the Vibration and Driving Comfort optimum safety are our goal. interaction of active and passive Optimum vehicle acoustics and safety measures. noise reduction make for maximum driving comfort. Development, integration and . Calculation and application of powertrains test management . Function development and . Development of chassis and . Development and validation of NVH acoustics vehicle dynamics supplier management . Assessment and optimisation of . System simulation and function vibration phenomena testing . Design and development of attributes for comfortable driving We are responsible for the integrated development of vehicle attributes, components and modules. Our speciality is the fact that our experts are involved right from the start. Page 15 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering Vehicle Validation Calculation and Simulation Testing, Material Inspection and Complete Vehicle and Test Stand Construction Component Validation We focus on ensuring a Our own test laboratories offer We ensure that your prototype fulfils radical reduction in you maximum flexibility in the statutory regulations and your development times. vehicle development. quality demands. Stiffness, stability and . Accredited test laboratories . Validation planning durability . Component and . Test vehicle management . Crash, passenger and system testing . Test coordination and pedestrian protection . Material inspection, appraisal support . NVH of material properties, materials . Certification and homologation . Flow simulation consulting . Tolerance management We offer all relevant CAE solutions, as well as a unique network of test laboratories, at the most important sites in Germany. Page 16 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering Project Management Engineering Responsibility Processes and Tools Focus on Product and Production Process We are a partner that meets the Professional process management Our goals are to achieve top stringent requirements of complete to monitor and document all data quality standards, meet deadlines vehicle development. and non-conformities. and keep costs to a minimum. Complete vehicles / derivatives . Risk management . Product targets . Factory and production solutions . Change management . Cost and weight of product . Management of international . Engineering quality . Product quality projects . Production quality . Production process . Development and supplier management A clear structure, bespoke solutions and continuous tracking characterise our project management. Page 17 © Copyright 2018 EDAG Engineering GmbH. All rights reserved. Vehicle Engineering Quality and Documentation Management Quality Solutions Communication solutions Individual Solutions In spite of reduced development We are specialists in the fields of In interdisciplinary teams of times and increasing model variety, information design, technical communications and quality experts, we help to ensure high quality documentation and data we create methodically supported standards. structuring. solutions for practical
Load more

Recommended publications
  • Do You Want to Make Automotive Ideas Shine?
    DO YOU WANT TO MAKE AUTOMOTIVE IDEAS SHINE? THE CHALLENGE FOR GRADUATES AND PROFESSIONALS IN AUTOMOTIVE DEVELOPMENT – AT EDAG. WHAT DO WE DO? ADVANCE MOBILITY! As one of Germany‘s largest independent Cars shape society, they alter our lives and our engineering service providers, we develop vehicle future. And since all cars are different, we are an components, modules, complete vehicles and extreme agile company with a constant strive for production systems for the major vehicle change. In other words: even our professionals manufacturers. That is the technical side. continuously learn. We are always taking new But we take things further than that: we want directions, looking for ways to improve. to move people! This means that, we not only That‘s why we are not just any engineering focus on the technical aspects of mobility, we service provider, but possibly the most exciting also concentrate on the value of our work. That one in the world! sounds idealistic but cars are no longer there just to be driven. WHO WE ARE: EDAG AT A GLANCE In 1969, Horst Eckard founded the company Our clients are the most reputable car „eckard design“ in Groß-Zimmern near manufacturers in the world. Darmstadt. Soon after this, our headquarters has Audi, BMW, Bugatti, Chrysler, Daimler, Fiat, Ford, moved to Fulda, where we started to specialise in Honda, Hyundai, Mitsubishi, Opel, Porsche, vehicle and production plant development. Since Renault, Seat, Skoda, Toyota, Volkswagen then, EDAG has grown enormously, and is now rely on our know-how. represented on four continents. In 2014, our headquarters moved to Wiesbaden.
    [Show full text]
  • Engineering Analysis Q2 2020
    Engineering Service Providers & ISVs Q2 2020 Analysis Pareekh Jain September 2020 Agenda Q2 2020 Analysis ▪ Indian Engineering Service Providers ▪ European Engineering Service Providers ▪ Global Engineering ISVs © 2020 Pareekh Consulting. All rights reserved. 2 Revenue and growth of Indian Engineering Service Providers in Q2 2020 Q2 2020 Service Provider Engineering Services Revenue Million QoQ Growth Persistent USD 131 3.1% HCL ERS USD 378 -9.0% LTTS USD 171 -12.5% Cyient USD 131 -12.5% Tata Elxsi USD 53 -13.0% KPIT USD 65 -13.8% Note: TCS, Wipro, Infosys, Tech Mahindra, QuEST Global, Tata Technologies, Cognizant, and Global Logic will also make in the list of India-centric ESP with quarterly revenue > USD 50 Million. Their financial details of engineering business are not available. © 2020 Pareekh Consulting 3 Summary of engineering services landscape for Indian providers Summary of engineering service providers' industry wise growth trends based on Q2 2020 (FY Q1, 2020) results and discussion with stakeholders. ▪ Growth: Software/ ISV, Medical device/ healthcare ▪ Flat: Telecom/ media ▪ Decline: Automotive, Aerospace, Industrial/ Oil & Gas News of large deals/ carve outs in ISV, Automotive and Telecom from Persistent, KPIT, LTTS and HCL. Hope Q1 has bottomed out and service providers start showing some QoQ growth in Q2. Bottom Line: The deal signing and pipeline is encouraging. © 2020 Pareekh Consulting. 4 Agenda Q2 2020 Analysis ▪ Indian Engineering Service Providers ▪ European Engineering Service Providers ▪ Global Engineering ISVs
    [Show full text]
  • We Develop the Future Edag Annual Report 2016 Selected Performance Figures from Consolidated Financial Statement
    WE DEVELOP THE FUTURE EDAG ANNUAL REPORT 2016 SELECTED PERFORMANCE FIGURES FROM CONSOLIDATED FINANCIAL STATEMENT (in € million or %) 2016 2015 Vehicle Engineering 454.3 455.0 Production Solutions 118.4 119.8 Electrics/Electronics 152.3 158.9 Consolidation/Others - 10.1 - 11.7 Total revenues and changes in inventories 714.9 722.0 Growth of core business: Vehicle Engineering - 0.2 % 9.0 % Production Solutions - 1.2 % 12.6 % Electrics/Electronics - 4.2 % 28.4 % Total change of revenues and changes in inventories - 1.0 % 13.7 % Vehicle Engineering 28.1 45.7 Production Solutions 11.9 15.7 Electrics/Electronics 4.2 11.5 Others - 0.4 - 0.3 Adjusted EBIT 43.8 72.6 Vehicle Engineering 6.2 % 10.0 % Production Solutions 10.0 % 13.1 % Electrics/Electronics 2.8 % 7.2 % Adjusted EBIT-margin 6.1 % 10.1 % Profit or loss 18.0 36.3 Earnings per share (€) 0.72 1.45 (in € million or %) 12/31/2016 12/31/2015 Fixed assets 186.8 190.5 Net working capital 99.6 95.2 Net financial debt - 98.1 - 93.4 Provisions - 39.6 - 37.7 Held for sale 4.1 0.6 Equity 152.8 155.2 Balance sheet total 430.4 475.5 Equity/BS total 35.5 % 32.6 % Net financial debt/Equity 64.2 % 60.2 % (in € million or %) 2016 2015 Operating cash flow 51.8 27.6 Investing cash flow - 27.3 13.7 Free cash flow 24.5 41.3 Financing cash flow - 76.4 - 9.7 Adjusted Cash Conversion Rate1 57.0 % 66.7 % CapEx 27.9 30.3 CapEx/Revenues and changes in inventories 3.9 % 4.2 % 1 Adjusted Cash Conversion is defined as Adjusted EBIT before depreciation and amortization less capital expenditures divided by Adjusted EBIT before depreciation and amortization.
    [Show full text]
  • Medical Electronics 2 | Medical Electronics
    Henkel Solutions Medical Electronics 2 | Medical Electronics Overview Accurate diagnostics, improved alternative treatments and patient monitoring are all critical needs of the medical electronics industry. But, none of this is possible without the high-reliability medical devices used to facilitate these objectives. Henkel’s advanced semiconductor packaging and assembly materials are delivering the solutions needed to address the demanding requirements of next- generation medical electronics. There’s no doubt that improving access to patients’ data has enabled medical professionals to provide personalized care and has expanded early intervention programs for the treatment of chronic conditions. Technologies such as implantable medical devices and patient monitoring sensors that make this type of patient care possible now require a form factor that is only achieved through advanced electronic devices, materials and assembly methods. Henkel’s technical expertise, low-risk partnership proposition, innovation philosophy, world-class global support infrastructure and history as a leading formulator of market-leading materials ensure that we will enable the future advancement of the medical electronics industry. Medical Electronics | 3 4 | Medical Electronics Index Medical Inks & Coatings Adhesives COB Encapsulants PCB Protection Solder Materials Underfills Silver/ Electrically Non- Low Electrically Non- Glob Tops Conformal Liquid Silver Water-Based Conductive Conductive Dam Fill Pressure Pastes Wires Capillary Flow Edgebond Conductive Inks
    [Show full text]
  • Edag Annual Report 2018 Selected Performance Figures from Consolidated Financial Statement
    50 YEARS OF ENGINEERING PERFORMANCE EDAG ANNUAL REPORT 2018 SELECTED PERFORMANCE FIGURES FROM CONSOLIDATED FINANCIAL STATEMENT (in € million or %) 2018 2017 revised* Vehicle Engineering 490.3 452.1 Production Solutions 159.2 130.8 Electrics/Electronics 155.5 148.5 Consolidation/Others - 12.7 - 12.9 Total revenues1 792.3 718.5 Growth of core business: Vehicle Engineering 8.4% -0.5% Production Solutions 21.7% 10.5% Electrics/Electronics 4.7% -2.5% Total revenues1 10.3% 0.6% Vehicle Engineering 30.4 19.6 Production Solutions 9.8 8.9 Electrics/Electronics 7.4 5.8 Others - - Adjusted EBIT 47.6 34.3 Vehicle Engineering 6.2% 4.3% Production Solutions 6.1% 6.8% Electrics/Electronics 4.8% 3.9% Adjusted EBIT-margin 6.0% 4.8% Profit or loss 25.5 15.5 Earnings per share (€) 1.02 0.62 1 The performance figure “revenues“ is used in the sense of gross performance (sales revenues and changes in inventories) in the following. * The previous year was adjusted due to amendments made to the international accounting standard IFRS 15. Comparability of the revenue changes from 2017 with the same period in the previous year (2016) is only marginally restricted by the first-time adoption of IFRS 15 on January 1, 2017. (in € million or %) 12/31/2018 12/31/2017 revised* Fixed assets 193.5 195.1 Net working capital 87.1 93.0 Net financial debt - 82.9 - 103.6 Provisions - 43.4 - 40.2 Held for sale - 3.2 Equity 154.3 147.5 Total assets 488.0 442.6 Equity/BS total 31.6% 33.3% Net financial debt/Equity 53.7% 70.2% (in € million or %) 2018 2017 revised* Operating Cash-Flow 68.9 51.6 Investing Cash-Flow - 21.5 - 28.5 Free Cash-Flow 47.4 23.1 Financing Cash-Flow 3.2 - 27.7 Adjusted Cash Conversion Rate2 68.1% 62.1% CapEx 22.2 21.7 CapEx/Revenues and changes in inventories 2.8% 3.0% 2 The key figure "adjusted cash conversion rate" is defined as the adjusted EBIT before depreciation, amortization and impairment less gross investments divided by the adjusted EBIT before depreciation, amortization and impairment.
    [Show full text]
  • Edag Group Sustainability Report 2019 2 I Management Statement
    EDAG GROUP SUSTAINABILITY REPORT 2019 2 I MANAGEMENT STATEMENT Holger Merz · CFO Cosimo De Carlo · CEO MANAGEMENT STATEMENT I 3 STATEMENT OF THE GROUP EXECUTIVE MANAGEMENT Dear Sir or Madam, With this Sustainability Report, we are for the first time publishing a separate document to inform you of our development, values and goals with regard to economic, ecological and social factors. Sustainability as a contribution to safeguarding the future of the EDAG Group Sustainability is of special importance at EDAG: it involves both a long-term business policy and the integration of ecological and social aspects in the management system. As a part of our corporate culture, it determines our actions with our business partners as well as our values, such as trust, transparency, reliability and fairness. It is therefore a contribution towards safeguarding the future of our company, and towards long-term economical and social development. As an internationally active company, EDAG makes a point of ensuring that human rights and accepted standards are complied with at our numerous locations across the globe, and affirms its support of the UN Global Compact. As one of the world's leading engineering companies in the automobile industry, it is also our intention to set benchmarks in the way we deal with each other, with business partners and the environment. In order to make this transparent for our partners, too, we have defined our standards of conduct in the EDAG Code of Conduct. It is in line with our value system to combine entrepreneurial action with ethical principles and thus, by acting with integrity, ensure compliance with legal regulations at all times.
    [Show full text]
  • Virtual Performance Solution Optimizing Product Performance with Simulation
    Virtual Performance Solution Optimizing Product Performance with Simulation Featuring PAM-CRASH www.esi-group.com Optimize your product development cycle thanks to Virtual Performance Solution multi-domain, concurrent engineering using a single helps improve the efficiency of your Computer Aided core model. Engineering workflows during product development. Gain time, flexibility, quality and lower costs while accelerating your development cycle. Leverage concurrent engineering and optimize Crash and safety design variants. NVH and dynamics . Account for manufacturing conditions to improve the accuracy and reliability of your results. “Using a single core Multi-domain model allows us to Single core model Comfort perform faster design Statics and strength changes, giving us a competitive advantage. Furthermore, the calculation with the Implicit module is two times faster and uses less memory.” Interior acoustics Eberhard Keim, CAE Department Non linear kinematics Manager, EDAG Ingolstadt. “Virtual Performance Solution allows cost BENEFITS and time savings in our . Master design iterations with a single core model and cut cost and time by saving model translation tasks between crash, safety, comfort, statics, Product Development dynamics, NVH, interior acoustics and durability. Cycle.” . Reduce design iterations and optimize safety margins by improving quality and predictability thanks to contacts, nonlinearities, and Mr. Kazuhiro Obayashi, Integrated manufacturing history handling. CAE Department Manager, . NISSAN MOTOR CO. LTD. Decrease
    [Show full text]
  • Flyer Airbag
    AIRBAG VEHICLE SAFETY TESTING YOUR GLOBAL MOBILITY ENGINEERING EXPERTS Nowadays a large number of different safety systems are Overview of our services installed in modern vehicles of all classes. The systems are • Conduction of airbag bench tests in various designed to prevent accidents (active systems) or reduce development phases for driver-, co-driver-, the impact of accidents (passive systems). As well as seat knee, curtain and side airbags at temperatures belts, airbags belong to the most important safety features from -40°C to +90°C of a vehicle. · Development tests with prototypes Many types of different airbags need to be integrated in a · Release tests with “new” and vehicle for the optimal protection of the occupants during “environmentally aged” parts a collision. · Series monitoring (quality control) · After Sales (e.g. cost reduction, Airbags are located in the steering wheel, the instrument further system development) panel, behind the pillar covers or inside the headliner. Depending on accident case, the usually invisible airbags • Test result analysis ignite within a few milliseconds. • Development and production for airbag environment (e.g. covers) What matters now is the right “unfolding”! We make sure that the airbags are opening correctly • Simultaneous testing with up to six and fulfil their protective function. high-speed cameras • Parallel development using CAE-simulation The proper test bench for all cases We are conducting the tests inside various climatic chambers within vehicle environment or in structural replicas (e.g. seats and covers). Tests will be recorded by most modern high- speed cameras, placed at various positions – optionally inside the climatic chamber.
    [Show full text]
  • CAR: Identifying Real World Barriers to Implementing Lightweighting
    Identifying Real World Barriers to Implementing Lightweighting Technologies and Challenges in Estimating the Increase in Costs JAY BARON, PH.D. CENTER FOR AUTOMOTIVE RESEARCH 3005 BOARDWALK, STE. 200 ANN ARBOR, MI 48108 JANUARY 2016 Table of Contents Executive Summary .......................................................................................................................................... 1 The Drive to Lightweighting: Implementing Lightweighting Technologies - Real World Barriers and Estimating Increased Cost ................................................................................................................................ 3 Lightweighting is Not New ............................................................................................................................... 5 New Technology Qualification Takes Time ...................................................................................................... 6 Global Platforms Limit Flexibility and Optimization Opportunity.................................................................... 7 Vehicles are Designed with Many Attributes................................................................................................. 10 Sunk Cost and Infrastructure Limit Speed of Introduction ............................................................................ 13 There is no Known Average U.S. Vehicle ....................................................................................................... 14 Conclusion .....................................................................................................................................................
    [Show full text]
  • Gibt Es Einen Europaspezifischen Entwicklungsweg in Der Automobilindustrie?
    A Service of Leibniz-Informationszentrum econstor Wirtschaft Leibniz Information Centre Make Your Publications Visible. zbw for Economics Jürgens, Ulrich Working Paper Gibt es einen europaspezifischen Entwicklungsweg in der Automobilindustrie? WZB Discussion Paper, No. SP III 2004-301 Provided in Cooperation with: WZB Berlin Social Science Center Suggested Citation: Jürgens, Ulrich (2004) : Gibt es einen europaspezifischen Entwicklungsweg in der Automobilindustrie?, WZB Discussion Paper, No. SP III 2004-301, Wissenschaftszentrum Berlin für Sozialforschung (WZB), Berlin This Version is available at: http://hdl.handle.net/10419/49644 Standard-Nutzungsbedingungen: Terms of use: Die Dokumente auf EconStor dürfen zu eigenen wissenschaftlichen Documents in EconStor may be saved and copied for your Zwecken und zum Privatgebrauch gespeichert und kopiert werden. personal and scholarly purposes. Sie dürfen die Dokumente nicht für öffentliche oder kommerzielle You are not to copy documents for public or commercial Zwecke vervielfältigen, öffentlich ausstellen, öffentlich zugänglich purposes, to exhibit the documents publicly, to make them machen, vertreiben oder anderweitig nutzen. publicly available on the internet, or to distribute or otherwise use the documents in public. Sofern die Verfasser die Dokumente unter Open-Content-Lizenzen (insbesondere CC-Lizenzen) zur Verfügung gestellt haben sollten, If the documents have been made available under an Open gelten abweichend von diesen Nutzungsbedingungen die in der dort Content Licence (especially
    [Show full text]
  • Who's Who in European Automotive Design
    July 21, 2008 www.autonewseurope.com Design 2008 Who’s who in European automotive design Thousands of men and women have had their hands on the cars we are driving today. They have created eye-pleas- ing winners such as the Fiat 500, Nissan Qashqai and Audi TT, but they also have given us flops such as the Peugeot 1007, Jaguar X-Type and Renault Modus. Regardless of whether their last cars were winners or losers, Europe’s top stylists are at work on what they hope will be their next masterpieces. Below is a comprehensive list of the industry’s top designers and where they are doing their work. ASTON MARTIN Advanced Design Sindelfingen Studio: JOHNSON CONTROLS Marek Reichman, design director Dept DE/APS, HPC X805 Merkenich Design Center Andreas Maashoff, design director industrial 71059 Sindelfingen, Germany John Andrews Entwicklungszentrum design & craftsmanship Europe Senior manager: Andreas Langenbeck Spessartstrasse Studio: 50725 Cologne, Germany Studio: Banbury Road, Gaydon, Largo Spluga, 1 Industrial Design Studio Europe Gaydon, Warwickshire CV35 0DB, UK 22100 Como, Italy Johnson Controls Studio director: Michele Jauch-Paganetti HEULIEZ Automotive Experience Alain Masquelet, research and development director European Headquarters AUDI 17742 Cowan Street Industriestrasse 20-30 Wolfgang Egger, head of Audi group design Irvine, California 92614, USA Jean-Marc Guillez, advanced engineering director 51399 Burscheid, Germany Studio director: Gorden Wagener Stefan Sielaff, head of Audi design Studio: Studios: Advanced Design Center of Japan
    [Show full text]
  • Annual Report 2007 WERBUNG
    www.gildemeister.com annual report 2007 WERBUNG MONTFORT technologies for tomorrow. technologies for tomorrow. for technologies gildemeister annual report 2007 report annual gildemeister gildemeister Aktiengesellschaft Gildemeisterstraße 60 d-33689 Bielefeld Local Court hrb 7144 Phone: +49 (0) 52 05/74-3001 Fax: +49 (0) 52 05/74-3081 Internet: www.gildemeister.com E-Mail: [email protected] gildemeister group Key figures sales revenues Domestic order intake Domestic Key Figures € International € International The Consolidated Annual Financial Statements for gildemeister Aktiengesellschaft in million in million as at 31 December 2007 were prepared in accordance with the International Financial 2001 567.9 577.5 1,145.4 2001 566.1 537.0 1,103.1 Sales Revenues Reporting Standards (ifrs) – as they have to be applied in the European Union. 2002 491.7 541.1 1,032.8 2002 455.6 525.4 981.0 Order Intake 2003 475.7 502.1 977.8 2003 457.0 524.8 981.8 ebit 2004 2004 Annual Result 502.9 548.6 1,051.5 508.8 605.1 1,113.9 Employees 2005 501.9 624.0 1,125.9 2005 520.7 650.0 1,170.7 2006 612.8 716.2 1,329.0 2006 648.7 794.2 1,442.9 gildemeister group changes 2007 2006 2007 against 2006 2007 730.4 831.7 1,562.1 2007 847.6 1,017.3 1,864.8 € million € million € million % Sales revenues Total 1,562.1 1,329.0 233.1 18 Domestic 730.4 612.8 117.6 19 International 831.7 716.2 115.5 16 quarterly results (ebit) ebit in € million in € million % International 53 54 Order intake q1 2007 16.4 2001 78.1 Total 1,864.8 1,442.9 421.9 29 q2 2007 29.3 2002 17.2 Domestic 847.5 648.7 198.8 31 q3 2007 25.4 2003 34.7 International 1,017.3 794.2 223.1 28 q4 2007 54.8 2004 41.9 % International 55 55 2005 58.8 Order backlog* 2006 82.5 Total 749.4 446.7 302.7 68 2007 125.9 Domestic 273.1 156.0 117.1 75 International 476.3 290.7 185.6 64 % International 64 65 Investments 53.1 37.2 15.9 43 Personnel costs 366.4 320.2 46.2 14 annual result number of employees Machine Tools Personnel quota in % 22.9 24.1 in € million incl.
    [Show full text]