Aerospace Controls

Linear Actuators

ITT Aerospace Controls offers a wide range of electromechanical linear actuators to satisfy specific and demanding applications.

Utilizing machine screw drive systems and long life permanent magnet motors, a wide range of static and dynamic load/speed requirements can be accommodated.

Features • Permanent magnet motors • Machine screw drive • Force limiting capability • High reliability • Meets MIL-A-8064 requirements • Non-jamming mechanical stops • Integral electromechanical brake optional

Basic Features include non-jamming mechanical stops, fixed or adjustable electrical limits and switched or continuous position feedback provisions. Optional features include load limiting, EM/EMC provisions and electrcomechancial braking. All components are housed within an environmentally sealed aluminum enclosure. Linear Actuator Typical Applications Typical Specifications

• Secondary flight controls Type: Linear motion actuator with machine screw drive • APU doors Power: 28 VDC • Latches and locking Stops: Non-jamming mechanical • Trim tab actuation Stroke: From 1.00 to 4.00 inches • Bypass door actuator Static Loads: To 2500 lbs. • Beep actuator; engine RPM Rated Loads: To 500 lbs. • Torque matching Speed: .01 to 2.0 in./sec. • Utility applications EMI Filtration: MIL-STD-461C or RTCA/DO-160C Life Cycles: To 500,000 Weight: .75 lbs. to 3.0 lbs. Dielectric Strength: To 1500 VAC Insulation Resistance: To 100 Megohms at 500 VDC Temp.Range: -65°F to 265°F Electrical Connector: As required

Basic Dimensions

3.48 Connector .905 MS3476L8-33PN 3.36 .98 Backshell M85049/52S-8N .73 2X .08 Min Ø.196 Ø.68 Adjustment .88 ± .005 AN316-4R Bonding Lug R.250 .91 1.89 Ø.250 ±.001 12.00 ± .25 .250 .49 ± .005 .375 1.78 3.976 ± .005 Mid Position V+ Retract V+ Retract V- V- Extend V- Extend Mechanical Retract 5.22 ± .03 Connector Electrical Retract 5.275 ± .015

EMI Filter

Retract Extend Limit Limit Switch Switch

.372 ± .003 Wiring Schematic Shown In Full Retracted Position

ITT Aerospace Controls 28150 Industry Drive Valencia, CA 91355 tel: 661 295-4000 www.ittaerospace.com

AER0932_32 5/12 Specifications and dimensions subject to change.