CURRICULUM VITAE

PERSONAL DATA

1 FULL NAME: EGBE-NGU NTUI OGORK 2 DATE OF BIRTH: 3RD MARCH, 1964 3 PLACE OF BIRTH: EWELLE-MAMFE, CAMEROON 4 NATIONALITY: CAMEROONIAN 5 CONTACT ADDRESS: DEPT. OF CIVIL ENGINEERING BAYERO UNIVERSITY, PMB 3011 , NIGERIA E-MAIL:[email protected], [email protected] TEL: 08038464283 6 MARITAL STATUS: MARRIED 7 STATE OF HEALTH: GOOD (NO DISABILITY) 8 QUALIFICATIONS: B.Sc (HONS) BUILDING TECHNOLOGY (1989) M.Sc (ENG) STRUCTURAL ENGINEERING (1990) PhD CIVIL ENGINEERING (STRUCTURAL ENGINEERING) (2015) 9 EDUCATIONAL HISTORY: a) EDUCATIONAL INSTITUTIONS ATTENDED WITH DATES; PRIMARY: C.B.C. SCHOOL, EWELLE-CAMEROON (1971-1978) SECONDARY: GOVT. HIGH SCHOOL, MAMFE-CAMEROON (1978- 1983) C.C.A.S., KUMBA-CAMEROON (1983-1985) TERTIARY: THE VICTORIA UNIVERSITY OF MANCHESTER, ENGLAND (1986-1989) THE UNIVERSITY OF LIVERPOOL, ENGLAND (1989- 1990) BAYERO UNIVERSITY, KANO, NIGERIA (2009-2014)

b) ACADEMIC QUALIFICATIONS WITH DATES: i FIRST SCHOOL LEAVING CERTIFICATE, 1978 ii GENERAL CERTIFICATE OF EDUCATION (GCE) ORDINARY LEVEL, 1983 iii GENERAL CERTIFICATE OF EDUCATION (GCE) ADVANCED LEVEL, 1985 iv B.Sc (HONS) DEGREE IN BUILDING TECHNOLOGY, 1989 v M.Sc (ENG) DEGREE IN STRUCTURAL ENGINEERING, 1990 v PhD CIVIL ENGINEERING (STRUCTURAL ENGINEERING) (2015)

10 EMPLOYMENT HISTORY: a) Project Manager in the construction of a three storey, eight apartment block, Biyem Assi, Yaounde, Cameroon (1991-1992) b) Structural Engineer with Toni Astel and Associates, Zaria, Nigeria (1993) c) Lecturer II, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (1994 – 1997) d) Lecturer I, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (1997 – 2009) e) Senior Lecturer, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (2009 – 2015) f) Associate Professor, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (2015 – Till Date) g) Part time Structural Engineer with COBAG PRIME NIGERIA LTD, Kano, Nigeria. (2002 – 2007) 11 WORKING EXPERIENCE a) Supervision of the construction of a three storey, eight apartment block, Biyem Assi, Yaounde, Cameroon (1991-1992) b) Design of some medium rise buildings with Toni Astel and Associates, Zaria, Nigeria (1993) c) Supervision of many Under Graduate, Post Graduate Diploma and Master in Civil Engineering projects and dissertations in structural Engineering and Civil Engineering materials (1994 – till date) d) Design of some residential apartment buildings, over head steel tanks and towers, culverts, etc. in Kano and its environs with COBAG PRIME NIGERIA LTD, Kano, Nigeria. (2002 – 2007)

12 COURSES TAUGHT CIV 3309: STUCTURAL ANALYSIS I 1994-2002 CIV 3307: DESIGN OF STRUCTURAL ELEMENTS I 1994-1999,2006/2007 CIV 4202: STRUCTURAL ANALYSIS II 1994-2014 CIV 5306: DESIGN OF TIMBER STRUCTURES 1994-TILL DATE CIV 5405: DESIGN OF STRUCTURAL ELEMENTS III 2007- TILL DATE TEC 3302: COMPUTATIONAL TECHNIQUES 2005-2013 CIV 8315: ADVANCED REINFORCED CONCRETE STRUCTURES 1999-TILL DATE CIV 8316: ADVANCED STEEL DESIGN 1999-TILL DATE CIV 7314 (7306): REINFORCED CONCRETE DESIGN 2000- TILL DATE CIV 7316: STRUCTURAL STEEL DESIGN 2000-2007 CIV 7308: THEORY OF STRUCTURES 2006-2007 CIV 7304: STRUCTURAL ANALYSIS I 2007-2015 CIV 7305: STRUCTURAL ANALYSIS II 2007-2015

13 RESEARCH INTEREST Has undertaken and supervised researches in construction materials, and in structural engineering. This include researches in locally available waste materials for use in construction of low cost housing, reliability assessment of civil structures, and various kinds of analytical research in structural engineering.

14 BACHELOR OF ENGINEERING (CIVIL ENGINEERING) PROJECTS SUPERVISED 1) Mohammed Hamisu Garba (1995): Effect of Partial Replacement of Cement with Makuba on the Strength Properties of Concrete 2) Mahmoud Ahmed Mannir (1996): Properties of Laterized Makuba as a Rendering Material 3) Nuruddeen Muhammad Musa (1997): An Assessment of the Structural use of Azara as a Composite Beam in Low Cost Housing 4) Vincent I. Tyoager (1997): Effect of Partial Replacement of Cement with Laterite on the Characteristic Compressive Strength of Concrete and Water Cement Ratio Moderation 5) Nasiru Sani Inuwa (1999): Design of Reinforced Concrete Bridge over River Tatswarki in Dawakin-Kudu Local Government Area, Kano State 6) Mu’azu Mohammed (1999): Design of an indoor Swimming Pool and Recycling Plant for Water Treatment at Bayero University Sports Complex, Old Campus 7) Sadiq Rilwan Kadara (1999): An Investigative Study of Improving the Properties of Laterite with Rice Husk Ash in th Construction of Low Cost Building Blocks 8) Nafiu Hassan Hanga (2000): Design of a Braced Steel Tower supporting an Elevated Water Tank proposed at Kabuga Housing Estate, Kano 9) Nuhu Mustapha (2000): Design of Pedestrial Timber Bridge at the Bush Canteen at Mallam Aminu Kano International Airport, Kano 10) Mohammed Hadi Ibrahim (2000): Design of a Structural Steel Warehouse and Bill of Engineering Measuremnts and Evaluation proposed for Kaduna North Local Government. 11) Michael Onimisi Salami (2000): Design of the proposed Reinforced Concrete Dome Mosque at Zango Dakata, Kano State 12) Nurudddeen Yusuf (2001): Analysis and Design of Reinforced Concrete Sub- surface Water Reservoir at Sabon Gari Market, Kano 13) Jimoh Omoh Sule (2002): Design of Reinforced Concrete Swimming Pool at Sport Arena, FCE Kano 14) Morou Adam (2003): Analysis and Design of a Reinforced Concrete Double Cell Box Culvert on Road Niamey-Say, Niger Republic 15) Adamu Hussaini and Ahmed Saleh Hassan (2005): An Investigative Study of the Influence of Ground Kargo Fruit on the Engineering Properties of Lateritic Soils (A Case Study of Kano Laterites) 16) Zakari Umar Farouq and Ahmed M. Osman (2005): Design and Performance of a Modified Septic Tank and Soak Away Sewage System 17) Nasiru Badamasi (2007): Computer Aided Design of a proposed Three Storey Office Complex for National Union of Teachers (NUT) Kaduna 18) Isyaka Abdulkadir (2008): An Investigation into the Use of Coconut Shell as Coarse Aggregate in Lightweight Concrete 19) Zainab Ango Murtala (2008): The Bond Strength of Rice Husk Ash Concrete 20) Muhammad Kabir Is’haq (2008): Software Development for the Analysis and Design of Reinforced Concrete Hollow Block Slab using VISUAL BASIC 6.0 Programming language 21) Haruna Garba Pasali (2008): An Investigation into the use of Katsi as an Admixture in Mortar 22) Abubakar Alhassan Abubakar (2008): Assessment of the Strength of Reinforcement Bars used in Nigeria 23) Hassan Ali (2008): Design of proposed Three Storey Shopping Mall at Utako District, Abuja 24) Abdulkadir Usman Mohammed (2010): Effect of Rice Husk Ash/ Katsi as a Pozzolana in Mortar 25) Nasir Kabir (2010): Effect of Rice Husk Ash and Katsi as Partial Replacement of Cement in Cement-Sand Mortar 26) Auwalu Yusuf (2010): Effect of Katsi and Rice Husk Ash as Partial Replacement of cement in Sandcrete Blocks 27) Abdulqadir Bala Adamu (2010): Effect of Rice Husk Ash/Katsi as a Pozzolana in Concrete 28) Salisu Abba (2010): Effect of Groundnut Shell Ash and Steel Slag on the Properties of Mortar 29) Abdurrauf Mukhtar Gora (2011): The use of Calcium Carbide Waste as Admixture in Mortar 30) Mustapha Nasir Said (2011): The Effect of Corn Cob Ash as Partial Replacement of Cement in Mortar 31) Abba Lawan Isah and Murtala Sani (2012): The Effect of Sawdust Ash on the Compressive Strength of Sandcrete Blocks 32) Hafiz Ibrahim (2012): Properties of Corn Cob Ash as Admixture in Sandcrete Blocks 33) Muhammed Mubarak Haruna and Muhammad Lawal Abdullahi (2012): Properties of Groundnut Shell Ash Concrete Improved with Bagasse Ash 34) Muhammad Bashir Yusuf and Mohammed Shamsudeen Usman (2012): The use of Quary Dust as a Partial Replacement of Cement in Concrete 35) Adam Muhammad Sharu and Jibril Nuhu Jibril (2013): Experimental Study of the Effect of Nominal Size of Coarse Aggregate on the properties of concrete 36) Muda’im Inuwa Dandago (2013): Effect of Guinea Corn Chaff Ash as Partial Replacement of Cement in Mortar 37) Mubarak Salisu and Usman Ahmad Aliyu (2013): Properties of Laterized Concrete with Rice Husk Ash as Pozzolana 38) Abubakar Yahaya and Ahmad Umar Turaki (2013): Properties of Laterized Concrete with Rice Husk Ash as Pozzolana 39) Mustapha Garba Jama’a and Balarabe Yusuf Mohammed (2014): Effect of Watermelon Waste Ash as Admixture on the Properties of Concrete 40) Bello Adavize Abel and Ikemefune Mohanye (2014): The Use of Calcium Carbide Waste as Admixture in Sandcrete Blocks 41) Sadiq Yau (2014): Structural Steel Warehouse Design for Storage 42) Shittu Usman Chidawa (2014): Software Development for Structural Design of Box Culvert using VISUAL BASIC 43) Luqman Yusuf and Abdullahi Abdulaziz (2014): Reliability Based Assessment of Timber Beam in Fire 44) Lonping Tazou Olivier and Femi Tosin Lawal (2015): Effect of Aggregate Size on Rice Husk Ash Concrete 45) Isah Salihu Adeku (2015): Effect of Partial Replacement of Natural Coarse Aggregate with Coconut Shell Aggregate on the Tensile Strength of Concrete.

15 POSTGRADUATE DIPLOMA IN CIVIL ENGINEERING PROJECTS SUPERVISED 1) Adediran Akinade David (2001): Structural Design and Detailing of a Three Cell Box Culvert on Karaye-Kwanyawa Road, Kano State 2) Nuhu Mohammed Otohinoyi (2002): A Comprehensive Design and Detailing of a Two Storey Office Complex to be situated in Abuja, FCT 3) Thomas Akata Ibu (2002): Reinforced Concrete Design of Bayero University Kano Shopping Complex 4) Aiyegoro Olalere Frank (2002): Structural Design of an Overhead Steel Tank with supporting Steel Tower for Senior Staff Quarter, Nigeria Railway Corporation, Nassarawa, Kano 5) Fadeyi Lawrence Olaniyi (2002): Structural Design and Detailing of a Residential Building (Duplex) making use of Flat Slab 6) Onuigbo Callistus Chibueze (2002): Design and Analysis of a Two Storey Hostel Building to BS 8110 (1985) at Bayero University Kano New Site 7) Apeh Ocholi Adejoh Samuel (2002): Structural Design and Detailing of a Lecture Theatre in Reinforced Concrete to BS 8110 for Federal Polytechnic Idah 8) Isayinka Daniel Olusegun (2002): Design and Detailing of a Storey Building Office Development 9) Bala Garba Miringa (2003): The Quality of Concrete Mixed with Turbid, Saline and Non Turbid Water, respectively 10) Mukaila Adejare Adepoju (2003): Reinforced Concrete Design, Detailing and Bill of Quantities of a Three Storey Training Centre for NNPC at Kaduna to BS 8110 11) Muhammad Tuga (2003): Computerized Spreadsheet Program for Design of Simple Beams and Slabs 12) Muhammad Inuwa (2003): Computer Aided Design of One Storey Reinforced Concrete Residential Building Estate 13) David Adamu Balami (2003): Utilization of Sawdust as Replacement of Sand in Lightweight Concrete 14) Bilyaminu Usman Abdullbaki (2003): The Quality of Sandcrete Hollow Block for Floor Production in Kano 15) Popoola S. Raymond (2003): Design of a Reinforced Concrete Bridge Across River Odo-Otin, Inisa-Ikirun Way, Osun State 16) Gabriel Aderemi Adaramoye (2003): Design, Detailing and Bill of Quantities of a Three Storey Sixteen Flats Residential Building, Staff Quarter at Federal College of Education, Kano 17) Samson Kunle Fasein (2005): Analysis and Design of a Two Storey Office Complex for of Engineering, Kano University of Technology, Wudil Kano State 18) Usman Mohammed Bakundi (2005): Analysis, Design and Detailing of a Ten Storey Office Complex for Nigerian National Petroleum Corporation (NNPC) Lagos 19) Abdulai Fatai Ajibade (2005): Structural Design and Detailing of a Two Storey Shopping Complex on a Water Logged Soil at Garki District, Abuja 20) Abdulazeez Seidu Suleiman (2005): Design of a Cylindrical Reinforced Concrete Surface Water Reservoir for Lokoja, Kogi State 21) Awosika Olawale (2005): Analysis and Design of a Two Storey Building for NECO Regional Office, Kano 22) Kalli Mallam Baba (2006): Structural Design of a Three Storey Reinforced Concrete Office Block at Sharada, Kano 23) Minkailu Mohammed Ibrahim (2006): Structural Design of Overhead Steel Water Storage Tank for Lokogwoma Housing Estate, Ganaja Road, Lokoja, Kogi State 24) Kabiru Salisu Kiru (2006): Design of a Reinforced Concrete Bridge Across River Kamanda in Kiru Local Government Area, Kano State 25) Aliyu Umar (2006): Design of a Reinforced Concrete Bridge over River Musa along Bida-Lemu Road, Niger State 26) Rabiu Abdullahi (2006): Design of Flood Control Measures for River Gagare at (Yarkuka) Area, Isa Town 27) Yusuf Danladi Bello (2006): Design of Two Storey Building at Nigerian Law School Campus , Kano 28) Amamat O. Adeyemi (2006): Design of Overhead Steel Tank Tower for Kabala West, Kaduna 29) Ijituji Olabanji Henry (2008): Analysis and Design of a Reinforced Concrete Single Cell Box Culvert along Jikwoyi- Karshi Road, Abuja, FCT 30) Abubakar Salisu (2008): The use of Quarry Dust as a Partial Replacement of Sand in Concrete 31) Kamaru Kareem (2008): Design of proposed Water Storage Tank on 10 m high Tower at Bayero University Kano, New Campus 32) Ajayi Oluwarotimi Paul (2008): Design of a Football Stadium of 2000 Seating Capacity, Bayero University Kano, New Campus 33) Auwal Abubakar Yar’adua (2008): Redesign of Reinforced Concrete Bridge across River Dannakola along Katsina-Daura Road, Daura Local Government Area, Katsina State 34) Ahmed Abdullahi (2008): Structural Design and Detailing of a Three Cell Box Culvert on Garo-Godiya Road, Kabo Local Government Area, Kano State 35) Jimoh Sanusi (2008): Design of Reinforced Concrete Bridge across River Kaduna in Rafin-Guza, Kawo Kaduna 36) Nura Usman (2008): Design of a Reinforced Concrete Bridge across River Muduru along Katsina-Daura Road, Katsina State 37) Ikeh Josephine (2008): Characteristic Strength of Indigenous Steel Bars Produced in Nigeria 38) Amina Ebimari Saidu (2008): Investigation on Coconut Shell as Coarse Aggregate in Lightweight Concrete 39) Suleiman Lawal (2008): Design of a Reinforced Concrete Bridge at Makurda along Katsina-Daura Road, Katsina State 40) Umar Olushola Wahab (2008): Design of Telecommunication Steel Tower (Mast) Station at Gwarzo village, Kano State (A Complete Cell Site 50 m high Tower) 41) Saka Abdul Fatai (2008): Redesign of a Reinforced Concrete Bridge across River Oyun, Offa Local Government Area, Kwara State 42) Idris Shuaibu (2008): Computer Aided Reinforced Concrete Design of Three Storey Secondary School Building at Okene, Kogi State 43) Kabiru Rogo Usman (2010): An Investigation on the use of Stone Dust as Partial Replacement of Laterite in Block 44) Ashhabu Elkaseem (2010): An Investigation in the use of Poliostigma Thonningi (Kalgo) Pod Ash as an Admixture in Mortar 45) Ogunlade Musibau Oladele (2011): The Impact of Performance Bonds on Construction Projects Successful Delivery in Nigeria (A case study of FCT and neighbouring States) 46) Abdullahi Abubakar (2011): Effect of Dyeing Waste Water on the Quality of Concrete 47) Igboro Kayode Olu (2011): Properties of Groundnut Husk Ash Concrete with Ground Granulated Blast Furnace Slag as Improver 48) Owabor Iguodeyala Michaelking (2012): Performance of Crushed Palm Kernel Shell as Partial Replacement for Sharp Sand in Sandcrete Blocks 49) Nuhu Danja (2012): Effect of Guinea Corn Chaff Ash (GCA) as Partial Replacement of Cement on the Properties of Concrete 50) Ogbonna Nnamdi P. (2012): Software Development for Analysis and Design of Reinforced Concrete Beams 51) Aliyu Idris Ibrahim (2012): Software Development for the Design of Reinforced Concrete Rectangular Solid Slab 52) Babangida Mainasara (2012): Effect of Burnt Tyre Ash on the Quality of Sandcrete Blocks 53) Momoh Imoudu (2013): Investigation of the Properties of Recycled Asphaltic Concrete Aggregate Concrete 54) Adebayo Sumola Elizabeth (2013): Effect of Partial Replacement of Sand with Laterite on the Properties of Sandcrete Blocks 55) Nura Adamu (2013): Effect of Guinea Corn Chaff Ash (GCA) as Admixture on the Properties of Concrete 56) Yakubu Ali (2014): An Investigation on the causes of cracks in the T-Block Building, Faculty of Engineering, Bayero University Kano. 57) Gbolahan Oluwashola Samuel (2015): An Investigation into the causes of cracks in Building: A case study of Resurrection power building Kano 58) Abdulaziz Dayyabu (2015): Reliability Based Assessment of Expansion Joints in Reinforced Concrete Slabs under the Effect of loads and Temperature Variations. 59) Akpe-Ekanem Ekanem (2016): Properties of Concrete made with Coconut Husk Fibre as Additives. 60) Mohammadu Iliyas (2016): Properties of Concrete made with Silica Sand.

16 MASTER IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING) DISSERTATIONS SUPERVISED 1) Muhammad Kabir Rimi (June, 2005): An Investigation into the Admixture Properties of Kargo (Poliostigma Thonningi) Fruits Powder in Concrete. 2) Bilyaminu Usman Abdulbaki (March, 2008): Properties of Gum Arabic Mixed Laterite. 3) Nura Mu’azu (December, 2008): Probabilistic Limit State Design Format for Hot- Rolled Steel Beam-Column to BS 5950 (1985) 4) David Adamu Balami (November, 2008): Investigation on Rice Husk Ash Concrete Properties. 5) Thomas Akata Ibu (November, 2008): The Effect of Curing Medium on Makuba Concrete. 6) Hassan Othman Mohammed (December, 2008): Software Development for Design of Timber Slab Formwork, Wall Formwork and Falsework in Accordance with BS 5268 (1991) and BS 5975 (1984). 7) Muhammed Tuga Bawa (December, 2008): Software Development for Analysis of some Structural Elements using Finite Element Method (FEM). 8) John Wasiu (December, 2008): Reliability Based Design Format for Hollow Block Floor. 9) Nasir Mohammed Sala Koko (November, 2008): Investigation on Katsi Residue as Admixture in Concrete. 10) Usman Mohammed Bakundi (November, 2009): Computer Model of Beam- Masonry Wall Interaction. 11) Jibrin Abubakar Suleiman (June, 2009): Effect of Curing Methods on Quality of Concrete. 12) Suleiman Mohammed Laya (May, 2009): Properties of Recycled Concrete Aggregate Concrete in Aggressive Environment. 13) Ifeolorun Monyomi Olofin (June 2009): Computer-Aided Analysis and Design of a Simply Supported Long Span Highway Reinforced Concrete Bridge Deck/Beam System. 14) Godwin Omofonma (March, 2010): Effects of Polypropylene Fibres on Properties of High Strength Concrete. 15) Vincent Emhotso Michael Audu (July, 2010): Cocoa Pod Husk Ash as Admixture in Concrete. 16) Najiyu Abubakar (August, 2010): Development of Software for the Analysis and Design of Composite Steel Beam and Concrete Floor. 17) Muazu Bawa Samaila (August, 2010): Software Development for the Analysis, Design and Detailing of Reinforced Concrete Slabs Based on BS 8110 (1997). 18) Araga Adamu Odovidi (July, 2010): Cassava Peel Powder as Admixture in Concrete. 19) Modibbo Mohammed Tahir (August, 2010): Reliability Based Assessment of Composite Steel Beam and Concrete Floor. 20) Shakir-Deen Adeshina Akinloye (August, 2010): Reliability Assessment of Telecommunication Towers in Northen Nigeria. 21) Kudu Mohammed (August, 2010): Reliability Based Design Format of Waffle Floor Slab to BS 8110 (1997). 22) Sani Ibrahim (March, 2012): Properties of Concrete made with Calcium Carbide Waste as Admixture. 23) Isah Musa Safana (May, 2012): Reliability Based Assessment of Reinforced Concrete Shear Wall to BS 8110 (1997). 24) Nuhu Otohinoyi Mohammed (May, 2012): An Investigation into the use of Cow Bone Ash as Admixture in Concrete. 25) Mara Wazumtu (November, 2014): Groundnut Shell Ash as Admixture in Concrete. 26) Solomon Ayuba (May, 2015): Properties of Concrete with Sawdust Ash as Admixture. 27) Isyaka Abdulkadir (May, 2015): Properties of Scrap Tyre Steel Fibre Reinforced High Performance Concrete with Rice Husk Ash. 28) Abubakar Mohammed (May, 2015): Development of a Design Program for Reinforced Concrete Foundations using JAVA. 29) Murtala Zainab Ango (September, 2015): Reliability –Based Assessment of Timber Footbridge Truss to Eurocode 5 (2005). 30) Abdurrazaq Kamal Nakore (September, 2015): Reliability–Based Assessment of Timber Floor System. 31) Abdulkarim Muhammad Auwal (October, 2016): Effects of Corn Cob Ash in Self- Compacting Concrete (SCC). 32) Haruna Daud Gussau (October, 2016): The Effect of Partial Replacement of Coarse Aggregate with Waste Metal Bottle Caps on the Properties of Concrete 33) Aminu Maiyama Musa (June, 2017): Investigation of Ironstone Gravel as Coarse Aggregate in Concrete 34) Rabiu Shehu Bilyaminu (June, 2017): Effect of Ironstone chippings as Substitute for Fine Aggregate in Sandcrete Block Production 35) Nurudeen Isah Yakubu (On going): Reliability Based Evaluation of Reinforced Concrete Bridge Columns Subjected to Dynamic Load 36) Jibrin Ishaka Jibrin (On going): Truss design optimization using Harmony Search Method 37) Emmanuel Arubi (On going): The behavior of High Performance Polypropylene Fibre Reinforced Cement Composite Containing Rice Husk Ash (RHA) 38) Mustapha Garba Jama’a (On going): Effect of Coconut Shell Ash as Admixture on the Properties of Concrete 39) John Smith Abutu Simon (On going): Suitability of Date Palm Seed Ash (DPSA) for Concrete Production 40) Usman Ahmad Aliyu (On going): Properties of Laterized Concrete using Neem Seed Husk Ash as Admixture 41) Safiyanu Ishaq Muhammad (On going): Properties of Particle Board Produced from Mahogany Leaves

17 PhD IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING) THESIS SUPERVISED a) Abubakar Mohammed (On going): Properties of polypropylene fibre reinforced self compacting concrete modified with millet husk ash

18 INTERNAL EXAMINER OF MASTER IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING) DISSERTATIONS 1) Peter W. Ominijei (2003): Gum Arabic as an Admixture in Concrete. 2) Alhassan Ibrahim Marke (Sept, 2003): Strength Assessment of Colcrete 3) Taiye W.E. Adejumo (Aug, 2004): Torsional Analysis of Shear Core, Frame Tube and Tube-in Tube Structures 4) Akilu Muhammad (Dec, 2005): Reinforced Concrete Detailing Software Development using Autolisp. 5) Aliyu Yau Muhammad (2005): An Investigation into the Effect of Industrial Waste Contaminated Fine Aggregate on Concrete (A case study of Rivers Challawa, Kano and Tatsawarki Fine Aggregates) 6) Adekia Abiola (2005): Two Dimensional Modeling of Minimum Energy Loss Culverts using Finite Elements Method 7) Mamman Mas’udu (April, 2008): Influence of Fine Aggregate Zones on the Compressive Strength of Concrete 8) Gabriel Aderemi Adaramoye (Feb, 2009): Three Dimensional Modeling of Minimum Energy Loss Culverts using Finite Elements Method 9) Aaron Aboshio (Feb, 2009): Dynamic Study of Communication Masts in Northern Nigeria 10) Musa Abdul (Feb, 2009): Development of Computer Aided Design Environment 11) Mustapha Muhammad Lawan (May, 2010): Evaluation of the Effect of Type of Water on the Compressive Strength of Concrete 12) Pam Billy Fom (May, 2010): Evaluation of the Compressive Strength of Cement- Cow Dung Stabilized Bricks 13) Bishir Kado (2011): Probabilistic Design for steel Beam-Column Bolted End Plate Connection 14) Ahmed Ahmed (2012): Reliability Based Assessment of steel Plate Girder Design to BS 5950 15) Mukhtar Mustapha Jogana (2012): Computer-Aided Analysis, Design and Detailing of Reinforced Concrete Beam to BS 110 (1997) 16) Muhammad Idris Haruna (2012): Reliability Based Assessment of Composite Beam under fire using Euro code 4 17) Mohammed Lawan Magaji (2012): An Investigation into the effect of Temperature variation on the compressive Strength of Concrete. 18) Ogu Caleb Ikechukwu (May, 2015): An Investigation of the Flexural Strength of Compressed Stabilized Reinforced Earth Beam 19) Asumba Sylvia Ozulu (May, 2015): An Investigation on the Engineering Properties of higher and Lesser Known Timber Species in Kano market. 20) Garba Suleiman (September, 2015): Properties of Millet Husk Ash-Bitumen Stabilized Lateritic Block. 21) Barambu Abubakar Umar (June, 2016): Reliability Based Calibration of safety factors for the Design of a Simply Supported Steel Beam based on BS 5950 (2000) 22) Naziru Muhsin Inuwa (October, 2016): Artificial Neural Network Based Model for Analysis of Non-Prismatic Fixed End Beams and Cantilevers using Simple Prismatic Beams 23) Hildi Gideon Shuaibu (June, 2017): Investigation on Rice Husk Ash Concrete with Periwinkle Shell as Coarse Aggregate 24) Mohammed Sani Abdullahi (June, 2017): Reliability Analysis of Reinforced Concrete Bridge Deck Strengthened with Carbon Fibre Reinforced Polymer (CFRP) subject to Corrosion.

19 RESPONSIBILITIES a) Level Coordinator 1995-2002 b) Departmental Examination Officer 1997-1999, 2003 c) Faculty Examination Officer 2004-2006 d) Departmental PGD Coordinator 2006-2012 e) Departmental PG (M.Eng/Ph.D) Coordinator 2014/2015- Till date f) Faculty Representative to University Committee on Examination Malpractice and Leakages 2007-2011 g) Faculty Representative to University Committee on Qualification Irregularities 2014-Till date

20 COMMUNITY SERVICE a) Financial Secretary Cameroon Community Association Kano, Nigeria 2001 b) President Cameroon Community Association Kano, Nigeria 2002-2006 c) Patron Cameroon Community Association Kano, Nigeria 2007-Till date d) Member of Council St Stephen Catholic Chaplaincy Bayero University Kano, Nigeria 2011-2012 e) Adviser Justice and Peace Committee St Peter Military Chaplaincy Janguza Barrack Kano, Nigeria 2016- Till date

21 SEMINARS i) Egbe-Ngu Ntui Ogork (2014): Effects of Groundnut Husk Ash (GHA) in Cement Paste and Mortar. Ph.D Seminar presented in the Department of Civil Engineering, Bayero University Kano, 9th April, 2014 ii) Egbe-Ngu Ntui Ogork (2014): Influence of Groundnut Husk Ash (GHA) on Concrete Properties. Ph.D Seminar presented in the Department of Civil Engineering, Bayero University Kano, 14th May, 2014 iii) Egbe-Ngu Ntui Ogork (2014): Influence of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash (RHA) on Concrete in Normal and Aggressive Environments. Ph.D Seminar presented in the Department of Civil Engineering, Bayero University Kano, 24th July, 2014

22 CONFERENCE PROCEEDINGS i) Rufai, I.A.; Uche, O.A.U. and Ogork, E.N. (2012): Biosilica from rice husk ash as a new engineering raw material in Nigeria. The Nigeria Society of Engineer, National Engineering Conference Exhibition and Annual General Meeting, “HARMONY 2012”, pp. 1-20 ii) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014): Multiple Regression Models for Strength Prediction of Groundnut Shell Ash (GSA)-Rice Husk Ash (RHA) Concrete. Proceedings of the National Conference on Bridging the Gap between Academia and Industry in Nigeria-Refocusing the Engineering Discipline, Organized by Faculty of Engineering, Bayero University, Kano, 9th – 11th November 2014, pp. 78-88 iii) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2015): Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash in Cement Paste and Concrete. Proceedings of the International Conference on Key Engineering Materials V, Singapore, 21st – 23rd March 2015. Published in Advanced Materials Research, vol. 1119, pp. 662-671, (2015) Trans Tech Publications, Switzerland, www.scientific.net iv) Abubakar Mohammed and Egbe-Ngu Ntui Ogork (2015): Development of JAVA Application Software for Design of Concrete Foundations. Book of Proceedings of 1st Annual International Conference on ‘Science and Technology: Tools for Achieving National Development’, Faculty of Science, Northwest University, Kano, Nigeria, 8th – 12th November, 2015, pp. 50-55, www. Nwusciaic.com v) Isyaka Abdulkadir and Egbe-Ngu Ntui Ogork (2015): Properties of Scrap Tyre Steel Fibre Reinforced High Performance Concrete (STSFRHPC). Proceedings of 1st International Conference on Green Engineering for Sustainable Development (IC-GESD2015), Faculty of Engineering, Bayero University, Kano, Nigeria, in collaboration with the Faculty of Engineering, Tanta University, Egypt, 8th – 10th December, 2015, pp. 49-53. vi) Isyaka Abdulkadir and Egbe-Ngu Ntui Ogork (2015): Effects of Rice Husk Ash on the Properties of Scrap Tyre Steel Fibre Reinforced High Performance Concrete. Proceedings of 1st International Conference on Green Engineering for Sustainable Development (IC-GESD2015), Faculty of Engineering, Bayero University, Kano, Nigeria, in collaboration with the Faculty of Engineering, Tanta University, Egypt, 8th – 10th December, 2015, pp. 66-70 vii) E.N. Ogork and A.M. Auwal (2016): Mechanical Properties of Self Compacting Concrete (SCC) made with Corn Cob Ash (CCA). Book of Proceedings of the 15th Annual International Conference/ Nigerian Materials Congress (NIMACON 2016), Ahmadu Bello University, Zaria, Nigeria, 21st – 25th November, 2016, pp. 379-383 viii) Aboshio A., Uche O.A.U. and Ogork E.N. (2016): Reliability Based Calibration of Safety Factors for Reinforced Concrete Staircase Designed to BS 8110 (1997). Proceedings of 2nd National Engineering Conference on Bridging the Gap between Academia and Industry in Nigeria-Refocusing the Engineering Discipline- 2, Organized by Faculty of Engineering, Bayero University, Kano, Nigeria 6th – 8th December 2016, pp. 14-18 ix) Egbe-Ngu N. Ogork and Daud G. Haruna (2016): Mechanical Properties of Concrete made from Waste Metal Bottle Caps as Partial Replacement for Coarse Aggregate. Proceedings of 2nd National Engineering Conference on Bridging the Gap between Academia and Industry in Nigeria-Refocusing the Engineering Discipline- 2, Organized by Faculty of Engineering, Bayero University, Kano, Nigeria 6th – 8th December 2016, pp. 290-296

23 PEER REVIEWED JOURNAL ARTICLES 1) Ogork, E.N. and Rimi, M.K. (2007): ‘Kargo’ (Poliostigma thonningi) fruits powder as admixture in concrete. Journal of Engineering and Technology, vol. 2, No. 1, pp. 9-15, Faculty of Technology, Bayero University, Kano, Nigeria. 2) Ogork, E.N. (2008): A modified septic/soak-away system with available local materials as filters. Journal of Engineering and Technology, vol. 3, No. 1, pp. 113- 119, Faculty of Technology, Bayero University, Kano, Nigeria. 3) Ogork, E.N. and Ibu, T.A. (2009): Properties of powdered locust bean pod (‘Makuba’) concrete. Journal of Engineering and Technology, vol. 4, No. 2, pp. 32- 37, Faculty of Technology, Bayero University, Kano, Nigeria. 4) Gambo, A.H.; Ogork, E.N. and Aboshio, A. (2009): Wind-induced dynamic study of communication masts in northern Nigeria. Journal of Engineering and Technology, vol. 4, No. 2, pp. 67-78, Faculty of Technology, Bayero University, Kano, Nigeria. 5) Aboshio, A.; Ogork, E.N. and Balami, D.A. (2009): Rice husk ash as admixture in concrete. Journal of Engineering and Technology, vol. 4, No. 2, pp. 97-103, Faculty of Technology, Bayero University, Kano, Nigeria. 6) Ogork, E.N. and Koko, N.M.S. (2010): ‘Katsi’ (dye residue ash) as an admixture in concrete. Journal of Engineering and Technology, vol. 5, No. 1, pp. 81-89, Faculty of Technology, Bayero University, Kano, Nigeria. 7) Ogork, E.N.; Aboshio, A. and Balami, D.A. (2010): Durability assessment of concrete made with rice husk ash as admixture. Journal of Engineering and Technology, vol. 5, No. 1, pp. 90-98, Faculty of Technology, Bayero University, Kano, Nigeria. 8) Ogork, E.N. and Wasiu, J. (2010): Reliability-based assessment of simply supported hollow-pot slabs. Journal of Engineering and Technology, vol. 5, No. 2, pp. 85-94, Faculty of Technology, Bayero University, Kano, Nigeria. 9) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014): A study on groundnut husk ash (GHA) -concrete under acid attack, International Journal of Modern Engineering Research (IJMER), vol. 4, Iss. 7, July 2014, pp. 30- 35, www.ijmer.com 10) Ogork, E.N.; Uche, O.A.U. and Elinwa, A.U. (2014): Strength prediction models of groundnut husk ash (GHA) concrete, American Journal of Civil and Structural Engineering, vol. 1, no. 4, pp. 104-110, www.sciknow.org 11) Egbe-Ngu Ntui Ogork and Okorie Austine Uche (2014): Effect of particle size of groundnut husk ash (GHA) in cement paste and mortar, International Journal on Recent and Innovation Trends in Computing and Communication (IJRITCC), vol. 2, Iss. 9, September 2014, pp. 2764-2769, http://www.ijritcc.org 12) Egbe-Ngu Ntui Ogork and Okorie Austine Uche (2014): Effects of groundnut husk ash (GHA) in cement paste and mortar, International Journal of Civil Engineering and Technology (IJCIET), vol. 5, Iss. 10, October 2014, pp. 88-95, www.iaeme.com/Ijciet.asp 13) Egbe-Ngu Ntui Ogork and Solomon Ayuba (2014): Influence of Sawdust Ash (SDA) as Admixture in Cement Paste and Concrete. International Journal of Innovative Science, Engineering & Technology, vol. 1, Iss. 10, December 2014, pp. 736-743, www.ijiset.com 14) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014): Performance of groundnut husk ash (GHA) - Rice husk ash (RHA) modified concrete in acidic environment, International Journal of Engineering Research and Application (IJERA), vol. 4, Iss. 11, November 2014, pp. 71-77, www.ijera.com 15) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa 2015): Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash in Cement Paste and Concrete. Advanced Materials Research, vol. 1119, pp. 662-671, (2015) Trans Tech Publications, Switzerland, www.scientific.net 16) Mara Wazumtu and Egbe-Ngu Ntui Ogork (2015): Assessment of Groundnut Shell Ash (GSA) as Admixture in Cement Paste and Concrete. International Journal of Innovative Science, Engineering & Technology, vol. 2, Iss. 2, February 2015, pp. 77-86, www.ijiset.com 17) Olekwu Benjamin Elah, Gabriel Amode and Egbe-Ngu Ntui Ogork (2015): Strength prediction models for Laterized Concrete Incorporating Used Engine Oil as Admixture. American Journal of Civil and Structural Engineering, vol. 2, No. 2, pp. 11-15, www.sciknow.org 18) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2015): Hydrochloric Acid Aggression in Groundnut Shell Ash (GSA)-Rice Husk Ash (RHA) Modified Concrete. Scholars Journal of Engineering and Technology (SJET), vol. 3, Iss. 2A, pp. 129-133, www.saspuplisher.com 19) Ogork, E.N. and Araga, A.O. (2015): Potentials of cassava peel powder (CPP) as admixture in concrete. Bayero Journal of Engineering and Technology, vol. 10, No. 1, pp. 7-15, Faculty of Engineering, Bayero University, Kano, Nigeria, www.bayerojet.com 20) Ogork, E.N. and Audu, V.E.M. (2015): Cocoa Pod Husk Ash (CPHA) Concrete in Aggressive Environment. Bayero Journal of Engineering and Technology, vol. 10, No. 1, pp. 35-43, Faculty of Engineering, Bayero University, Kano, Nigeria, www.bayerojet.com 21) Egbe-Ngu Ntui Ogork and Suleiman Mohammed Laya (2015): Effect of Recycled Concrete Aggregates on Concrete. Nigerian Journal of Engineering, vol. 22, No. 1, pp. 26-35, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria 22) Egbe-Ngu Ntui Ogork and Godwin Omofonma (2015): Mechanical Properties of High Strength Polypropylene Fibre Concrete. Nigerian Journal of Engineering, vol. 22, No. 1, pp. 64-71, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria 23) Ogork, Egbe-Ngu Ntui and Omofonma, Godwin (2016): Durability assessment of polypropylene high strength concrete in marine environment. Bayero Journal of Engineering and Technology, vol. 11, No. 1, pp. 40-48, Faculty of Engineering, Bayero University, Kano, Nigeria, www.bayerojet.com 24) E.N. Ogork and Z M. Ango (2016): Reliability Assessment of a Timber Pinned Jointed Footbridge Truss. Nigerian Journal of Engineering, vol. 23, No. 1, pp. 35- 43, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria 25) E.N. Ogork and A. K. Nakore (2016): Reliability Estimates of a Simply Supported Timber Floor. Nigerian Journal of Engineering, vol. 22, No. 2, pp. 50-57, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria 26) E.N. Ogork and A K. Nakore (2017): Reliability Analysis of a Two Span Floor Designed According to Eurocode 5. Nigerian Journal of Technology (NIJOTECH), vol. 36, No. 1, pp. 18-25, Faculty of Engineering, University of Nigeria, Nsukka, Nigeria 27) E. N. Ogork and T. S. Ibrahim (2017): Properties of Cement Paste and Concrete Containing Calcium Carbide Waste as Additive. Nigerian Journal of Technology (NIJOTECH), vol. 36, No. 1, pp. 26-31, Faculty of Engineering, University of Nigeria, Nsukka, Nigeria 28) Ogork, E.N. and Suleiman, J.A. (2017): Assessment of the Effectiveness of Various Curing Methods on the Quality of Concrete. Bayero Journal of Engineering and Technology, vol. 12, No. 1, pp. 21-27, Faculty of Engineering, Bayero University, Kano, Nigeria 29) Ogork, E.N. and Dayyabu, A. (2017): Safety Level Assessment of Expansion Joints in Reinforced Concrete Slabs to Temperature Variations. Bayero Journal of Engineering and Technology, vol. 12, No. 1, pp. 44-51, Faculty of Engineering, Bayero University, Kano, Nigeria 30) Egbe-Ngu Ntui Ogork and Abdulkarim Muhammad Auwal (2017): Durability Characteristics of Self-Compacting Concrete Incorporating Corn Cob Ash. CARD International Journal of Engineering and Emerging Scientific Discovery (IJEESD), vol. 2, No. 1, pp. 29-41, Centre for Advanced Research and Development, Rivers State University of Science and Technology, Port Harcourt, Nigeria 31) Egbe-Ngu Ntui Ogork and Daud Gussau Haruna (2017): Durability of Waste Metal Bottle Caps Aggregate Concrete. CARD International Journal of Engineering and Emerging Scientific Discovery (IJEESD), vol. 2, No. 1, pp. 1-14, Centre for Advanced Research and Development, Rivers State University of Science and Technology, Port Harcourt, Nigeria 32) E. N. Ogork and T. S. Ibrahim (Accepted May 2017): Effects of Calcium Carbide Waste (CCW) on the Durability of Concrete. Bayero Journal of Engineering and Technology, Faculty of Engineering, Bayero University, Kano, Nigeria 33) E. N. Ogork and Y.N. Danja (Accepted May 2017): Evaluation of Properties of of Cement and Concrete Containing Sorghum Chaff Ash. Bayero Journal of Engineering and Technology, Faculty of Engineering, Bayero University, Kano, Nigeria

24 REFEREES 1) Engr. Dr. M.O.A. Mtallib Head, Department of Civil Engineering Bayero University, Kano, Nigeria Tel: 08037019138

2) Engr. Prof. M.H. Bichi Department of Civil Engineering Bayero University, Kano, Nigeria Tel: 08036353001

3) Engr. G.A. Bichi M.D. COBAG PRIME NIGERIA LTD 334 Aminu Kano Way, Kano, Nigeria Tel: 064-641347