DOCSLIB.ORG

OIL and Your Engine

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
OIL and Your Engine OIL and your engine Foreword Bearing failure, piston ring sticking, and excessive oil consumption are classic symptoms of oil-related engine failure. How do you avoid them? There are numerous ways, three of the most important being Scheduled Oil Sampling (S·O·S SM), regular maintenance of the lubrication system, and the use of correct lubricants. Following these recommendations can mean the difference between experiencing repeated oil related engine failure and benefiting from a productive and satisfactory engine life. This booklet attempts to tell the story of oil: what it is composed of and what its functions are, how to identify its contamination and degradation, typical consequences, and some preventive measures to help you protect your engine against the devastating effects of oil related engine failure. Understanding Oil Function Engine oil performs several basic functions in order to provide adequate lubrication. It works to keep the engine clean and free from rust and corrosion. It acts as a coolant and sealant; and it provides an oil film cushion that keeps metal-to- metal contact to a minimum, thereby reducing friction and wear. But these are only the basic functions of oil. It is the particular demands of a given application and the special conditions under which an oil is used that largely determine the numerous additional functions oil must perform. These additional functions make choosing the correct oil for the job vital. The selection of a suitable lubricating oil should be based on the engine performance requirements as specified by the manufacturer, as well as the application and the quality of the available fuel. Diesel engines, for instance, normally operate at lower speeds but higher temperatures than gasoline engines, making conditions exceptionally conducive to oil oxidation, deposit formation and corrosion of bearing metals. Under these conditions, the oil is expected to function in an expanded capacity. This is where additives are noticed. The final performance characteristics of the oil depend on the base oil and the additives used. The amount or types of additives used vary according to the properties of the base oil and the environment in which the oil will function. Base Stocks Lubricating oil begins with base oil or base stock. Base stocks are mineral (petroleum) or synthetic origin, although vegetable stocks may be used for specialized applications. The base stock provides the basic lubricating requirements of an engine. However, unless it is supported with additives, base oil will degrade and deteriorate very rapidly in some operating conditions. Depending on the type of base stock, petroleum, synthetic or others, different additive chemistries are used. Mineral Oils Mineral stocks are refined from petroleum crude oils. The crude oil source and the refining process will determine the base stock characteristics. The crude oils used for diesel engine lubricants are primarily made up of paraffin, napthene, and aromatic compounds. The crude oils with higher paraffin content are most frequently used in blended engine oils. The refining process begins with vacuum distillation. Vacuum distillation separates the oil into products with a similar boiling range and similar viscosities. After vacuum distillation, the oils must be purified to remove or modify undesirable compounds. Base oil purification is usually done by solvent extraction and hydrofinishing or by hydrocracking and hydrofinishing. Both of these processes are used to limit or eliminate wax, sulfur, and aromatics. Variations in these refining process produce base oils with different characteristics. Mineral base stocks are most prevalent for diesel engine oil formulation because they exhibit proven characteristics and are readily available at a reasonable cost. Synthetic Oils Synthetic base stocks are formed by processes that chemically react materials of a specific chemical composition to produce a compound with planned and predictable properties. These base stocks have viscosity indexes much higher than HVI mineral base stocks, while their pour points are considerably lower. These characteristics make them valuable blending components when compounding oils for extreme service at both high and low temperatures. The main disadvantage of synthetics is the significantly higher price and the somewhat limited supply. The group of synthetic oils known as esters causes greater seal swelling than mineral oils. The possible use of ester synthetic oils requires that component design be carefully considered for seal and ester oil compatibility. The use of synthetic base stocks lubricants in Caterpillar engines and machines is acceptable if the oil formulation meets the specified viscosity and Caterpillar performance requirements for the compartment in which it will be used. For very cold ambient conditions, the use of synthetic base stock oils is necessary. Additives Additives strengthen or modify certain characteristics of the base oil. Ultimately, they enable the oil to meet requirements beyond the abilities of the base oil. The most common additives are detergents, oxidation inhibitors, dispersants, alkalinity agents, anti-wear agents, pour-point depressants and viscosity index improvers. Here is a brief description of what each additive does and how. Detergents help keep the engine clean by chemically reacting with oxidation products to stop the formation and deposit of insoluble compounds. The detergents in use today are metallic salts called: sulfonates, phenates, phosphonates or salicylates. Alkalinity agents help neutralize acids. The detergents are also strong acid neutralizers, changing combustion and oxidation acids into harmless neutralized salts. Oxidation inhibitors help prevent increases in viscosity, the development of organic acids and the formation of carbonaceous matter. These anti-oxidants are the following chemicals: zinc dithiophosphates, phenate sulfides, aromatic amines, sulfurized esters, and hindered phenols. Depressants help prevent sludge formation by dispersing contaminants and keeping them in suspension. Common dispersant types include polyisobutenyl succinimides and polyisobutenyl succinic esters. Anti-wear agents reduce friction by forming a film on metal surfaces and by protecting metal surfaces from corrosion. The principal types of agents are alkaline detergents, zinc dithiophosphates and dithiocarbamates. Pour-point depressants keep the oil fluid at low temperatures by preventing the growth and agglomeration of wax crystals. Pour point depressant types are polymethacrylates; styrene- based polyesters, crosslinked alkyl phenols and alkyl naphthalenes. Viscosity Index improvers help prevent the oil from becoming too thin at high temperatures. Viscosity index improvers (VI improver) are chemicals which "improve" (reduce) the rate of viscosity change with temperature change. Chemicals used as VI improvers are polyisobutenes, polymethacrylates, styrene-based polyesters, styrene-based copolymers and ethylene propylene copolymers. Total Base Number (TBN) Understanding TBN requires some knowledge of fuel sulfur content. Most diesel fuel contains some amount of sulfur. How much depends on the amount of sulfur in the crude oil from which it was produced and/or the refiner's ability to remove it. One of the functions of lubricating oil is to neutralize sulfur by-products, namely sulfurous and su.lfuric acids and thus retard corrosive damage to the engine. Additives (primarily detergents) in the oil contain alkaline compounds which are formulated to neutralize these acids. The measure of this reserve alkalinity in an oil is known as its TBN. Generally, the higher the TBN value, the more reserve alkalinity or acid- neutralizing capacity the oil contains. Ash or Sulfated Ash The ash content of an oil is the noncombustible residue of a lubricating oil. Lubricating oil detergent additives contain metallic derivatives, such as barium, calcium, and magnesium compounds that are common sources of ash. These metallo-organic compounds in the oils provide the TBN for oil alkalinity. Excessive ash content will cause ash deposits which can impair engine efficiency and power. Viscosity Viscosity is one of the more critical properties of oil. It refers to its resistance to flow. Viscosity is directly related to how well an oil will lubricate by forming a film to separate surfaces that would contact one another. Regardless of the ambient temperature or engine temperature, an oil must flow sufficiently to ensure an adequate supply to all moving parts. The more viscous (thicker) an oil is, the thicker the oil film it will provide. The thicker the oil film, the more resistant it will be to being wiped or rubbed from lubricated surfaces. Conversely, oil that is too thick will have excessive resistance to flow at low temperatures and so may not flow quickly enough to those parts requiring lubrication. It is therefore vital that the oil has the correct viscosity at both the highest and the lowest temperatures at which the engine is expected to operate. Oils change viscosity with temperature, becoming less viscous as their temperatures increase. Refining techniques and special additives increase the Viscosity Index (VI) of oil. The higher the VI number of the oil, the lower its tendency to change viscosity with temperature. The Society of Automotive Engineers (SAE) standard oil classification system (SAE J300) categorizes oils according to their viscosity (via a number system such as SAE 10W, SAE 30, SAE 15W40, etc.). Each of the viscosity grades
Load more

Recommended publications
  • Oil Analysis Handbook Third Edition Copyright © 2017 Spectro Scientific
    Predictive Equipment Maintenance Oil Analysis Handbook Third Edition Copyright © 2017 Spectro Scientific. All rights reserved. FluidScan® and LaserNet Fines® are registered trademarks of Spectro Scientific Inc. While every effort is made to assure the information in this document ois accurate, Spectro Scientific does not accept liability for any errors or mistakes that may arise. Specifications are subject to change without notice. | 3 Preface Welcome to the third edition of the In-service Oil Analysis Handbook. It has been a few years since the publication of the first edition of Spectro Scientific’s In-Service Oil Analysis Handbook. Our original goal was to compile a comprehensive reference book of common in-service oil analysis techniques to help readers understand and choose the right technique and instrumentation for their needs. We had to limit the scope in the first two editions because of the amount of effort needed to cover all the topics. In-service oil analysis for condition based maintenance covers a wide array of topics. I am pleased to say that in this third edition, we are much closer to our goal. We reorganized the structure of the content for better clarity and we added articles to cover more topics and instruments associated with oil analysis. Also, we rewrote several articles including the latest developments on the market. As we learned more from our customers about their successes using on site oil analysis, we developed case studies that you can find in this edition. This work is not possible without the time and effort from the contributing authors: Patrick Henning, Daniel Walsh, Robert Yurko, Ken Caldwell, Thomas Barraclough, Maria Bartus, Randi Price, John Morgan, Aifeng Shi and Yuegang Zhao from Spectro Scientific and Ray Garvey from Emerson Process Management.
    [Show full text]
  • Synthetic Lubricant Base Stocks Formulations Guide Table of Contents
    Synthetic lubricant base stocks formulations guide Table of contents 1.0 Introduction — Using this guide ����������������������������������������������������������������� 1 7�3 Turbine oils ��������������������������������������������������������������������������������������������62 2.0 Lubricant formulators FAQs ������������������������������������������������������������������������ 3 7�4 Industrial gear oils ��������������������������������������������������������������������������������67 7�5 Paper machine oils �������������������������������������������������������������������������������72 3.0 Synthetic base stock grade slate summary ���������������������������������������������� 7 7�6 Lubricants for use with food machinery 4.0 Industry trends ����������������������������������������������������������������������������������������������� 9 (incidental food contact) ������������������������������������������������������������������������������������74 4�1 Energy outlook ��������������������������������������������������������������������������������������� 9 7�7 Miscellaneous lubricants ���������������������������������������������������������������������79 4�2 Lubricant industry trends ��������������������������������������������������������������������10 7�7�1 Heat transfer oils �����������������������������������������������������������������������79 4�3 Automotive trends �������������������������������������������������������������������������������10 7�7�2 Chain lubricants �������������������������������������������������������������������������81
    [Show full text]
  • Mabanol Engine Oil Additive Motor Oil Additive
    Mabanol Engine Oil Additive Motor Oil Additive Application Properties Mabanol Engine Oil Additive is filled into the Mabanol Engine Oil Additive is a nano tech- engine along with the motor oil. It is miscible nology-based oil additive designed to reduce with all types of motor oil. friction on mechanical parts, optimize engine It can be used in all petrol and diesel engines, performance and protect it in a durable way. including those equipped with catalytic con- Mabanol Engine Oil Additive produces a ro- verters, turbochargers and/or particulate filters bust lubricating film on the friction surfaces in both in passenger cars as well as in trucks. the engine which reduces friction losses and Not suitable for use in ATFs and motorcycles wear. This extends the life of the engine, im- with wet clutch. proves smoothness and optimizes efficiency. Mabanol Engine Oil Additive is also recom- mended for improving the performance of oil EAN Code in pumps, gearboxes and compressors. 300 ml can: 4260214890989 A can of 300 ml can be used for up to 4.5 liters of engine oil. The maximum dosage in the engine oil/additive blend is 20 volume percent. Please ensure that the correct oil level is maintained. Please shake well before use. Data Test method Unit Value Density at 20°C DIN 51 757 g/cm³ 0,874 Kin. Viscosity at 40°C DIN EN ISO 3104 mm²/s 316 Flash point ISO 3679 °C > 100 Lower explosion limit – Vol-% 0,6 Upper explosion limit – Vol-% 6,5 Updated in March 2019 The above values may vary within the commercial limits.
    [Show full text]
  • The Role of Nanoparticles in Lubricants; Performing Lubricated and Dry Friction Tests
    FELLOWSHIP RESEARCH The Role of Nanoparticles in Lubricants; Performing Lubricated and Dry Friction Tests Hamed Ghaednia* and Dr. Robert L. Jackson (Advisor) Auburn University, Department of Mechanical Engineering, Auburn, Ala. *Ford Motor Co., Powertrain Research and Advanced Engineering Group, Dearborn, Mich. Editor’s Note: This month TLT profiles the 2014 recipient of The E. Elmer Klaus Fellowship, Hamed Ghaednia (Auburn University). The Klaus Fellowship, along with The E. Richard Booser Scholarship, are awarded annually to graduate and undergraduate students, respectively, who have an interest in pursuing a career in tribology. As a requirement for receiving an STLE scholarship, students are given the opportunity to participate in a tribology research project and to submit a report summarizing their research. Hamed Ghaednia graduated with a bachelor’s of science degree in mechanical and chemical INTRODUCTION engineering and a master’s of science degree Nanoparticles when suspended in in mechanical engineering from the Tehran a lubricant can infiltrate small gaps Polytechnic. He recently received his between rough surfaces in contact doctorate in mechanical engineering, with and alter the contact’s tribological an emphasis in tribology, from Auburn performance. Hence, nanoparticles University’s Samuel Ginn College of offer an alternative approach to Engineering’s tribology and lubrication lubrication by introducing third body science minor program. He is currently entities directly into the contact. The working as a tribology research engineer ability of nano-sized particles to pass at the Ford Motor Co. in the Powertrain through conventional filters, penetrate Research and Advanced Engineering Group. into contacts that larger particles You can reach him at [email protected].
    [Show full text]
  • Lubricating Oil Composition and Additive Therefor Having Improved Wear Properties
    (19) TZZ ¥_T (11) EP 2 949 738 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication: (51) Int Cl.: 02.12.2015 Bulletin 2015/49 C10M 141/10 (2006.01) (21) Application number: 15170007.7 (22) Date of filing: 31.05.2015 (84) Designated Contracting States: (72) Inventors: AL AT BE BG CH CY CZ DE DK EE ES FI FR GB • Lagona, Jason A. GR HR HU IE IS IT LI LT LU LV MC MK MT NL NO Richmond, VA 23225 (US) PL PT RO RS SE SI SK SM TR • Loper, John T. Designated Extension States: Richmond, VA 23233 (US) BA ME Designated Validation States: (74) Representative: Dunleavy, Kevin James MA Mendelsohn, Drucker & Dunleavy, P.C. p/o De Vries & Metman (30) Priority: 30.05.2014 US 201462005135 P Overschiestraat 180 01.05.2015 US 201514701899 1062 XK Amsterdam (NL) (71) Applicant: Afton Chemical Corporation Richmond, Virginia 23219 (US) (54) LUBRICATING OIL COMPOSITION AND ADDITIVE THEREFOR HAVING IMPROVED WEAR PROPERTIES (57) A compression-ignited engine lubricant and a compound or anhydride thereof, and optionally, (iv) a method for reducing engine wear. The lubricant includ- nonaromatic dicarboxylic acid or anhydride, wherein the ing, (a) a base oil; (b) oleamide; (c) zinc dihydrocarbyl hydrocarbyl group of the hydrocarbyl-dicarboxylic acid dithiophosphate; and (d) a functionalized dispersant. The or anhydride has a number average molecular weight of functionalized dispersant is made by reacting together greater than 1800 Daltons as determined by gel perme- (i) a hydrocarbyl-dicarboxylic acid or anhydride, (ii) a ation chromatography. polyamine, (iii) a dicarboxylcontaining fused aromatic EP 2 949 738 A1 Printed by Jouve, 75001 PARIS (FR) EP 2 949 738 A1 Description RELATED APPLICATION 5 [0001] This application claims priority to provisional application Serial No.
    [Show full text]
  • Types, Examples and Working Mechanism of Rheo-Improvers Lubricating Oil Additives
    Petroleum & Petrochemical Engineering Journal ISSN: 2578-4846 Types, Examples and Working Mechanism of Rheo-Improvers Lubricating Oil Additives Rasha S Kamal* Mini Review Department of Petroleum Applications, Egyptian Petroleum Research Institute, Nasr City, Volume 2 Issue 5 P.O. Box 11727, Cairo, Egypt Received Date: June 10, 2018 Published Date: June 22, 2018 *Corresponding author: Rasha S Kamal, Department of Petroleum Applications, Egyptian Petroleum Research Institute, Nasr City, P.O. Box 11727, Cairo, Egypt, Tel: +2 02 22745902 (2155); Email: [email protected] Abstract Lube oil additives play an important role to facilitate our daily life. And the most important one is Rheo-Improve lubricating oil additive, because it is performance enhancing additive it consists of two type viscosity index improvers and pour point depressants. This mini review highlights of Rheo-Improvers importance. Viscosity modifier (preparation of some examples, general properties, working mechanism and factors that limit their action). Pour point depressants (examples, general properties, working mechanism). Keywords: Rheo- improvers; Viscosity index improvers; Pour point depressant Introduction According to new classification of lubricating oil additives which depending on the working function the The major role in the science is how to make life so additives classify into 3 major category: easy and eco-friendly. Lubrication is a feature of how to live an easy life. Lubrication in simply form is the use of 1. Rheo- improvers material to improve one surfaces over another by using 2. Maintainers lubricant. Lube oil additives are chemical components or 3. Tribo-improvers blend used at a specific treat rate, generally from 1 to 35 % of the oil volume, depending on the machine to provide Rheo-Improvers (Rheological Properties one or more functions in the fluid.
    [Show full text]
  • Jojoba Polymers As Lubricating Oil Additives
    Petroleum & Coal ISSN 1337-7027 Available online at www.vurup.sk/petroleum-coal Petroleum & Coal 57(2) 120-129 2015 JOJOBA POLYMERS AS LUBRICATING OIL ADDITIVES Amal M. Nassar, Nehal S. Ahmed, Rabab M. Nasser* Department of Petroleum Applications, Egyptian Petroleum Research Institute. Correspondence to: Rabab M. Nasser (E-mail: [email protected]) Received January 12, 2015, Accepted March 30, 2015 Abstract Jojoba homopolymer was prepared, elucidated, and evaluated as lube oil additive, then novel six co- polymers were prepared via reaction of jojoba oil as a monomer with different alkylacrylate, (dodecyl- acrylate, tetradecyacrylate, and hexadecyacrylate), and with different α – olefins (1-dodecene, 1-tetra- decene, and 1-hexadecene), separately with (1:2) molar ratio. The prepared polymers were elucidated using Proton Nuclear Magnetic Resonance (1H-NMR) and Gel Permeation Chromatography (GPC), for determination of weight average molecular weight (Mw), and the thermal stability of the prepared poly- mers was determined. The prepared polymers were evaluated as viscosity index improvers and pour point depressants for lubricating oil. It was found that the viscosity index increases with increasing the alkyl chain length of both α- olefins, and acrylate monomers, while the pour point improved for additives based on alkyl acrylate. Keywords: Lubricating oil additives; viscosity modifiers; pour point depressants; jojoba – acrylate copolymers; jojoba- α olefins copolymers; TGA and DSC analysis. 1. Introduction Lubricants and lubrication were inherent in a machine ever since man invented machines. It was water and natural esters like vegetable oils and animal fats that were used during the early era of machines. During the late 1800s, the development of the petrochemical industry put aside the application of natural lubricants for reasons including its stability and economics [1].
    [Show full text]
  • A Strategic Analysis of Bestline Lubricants' Diesel
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by Simon Fraser University Institutional Repository A STRATEGIC ANALYSIS OF BESTLINE LUBRICANTS’ DIESEL ENGINE TREATMENT by Tristan Sloan Master of Science, Chalmers Technical University, 2010 Bachelor of Engineering, University of Victoria, 2004 . PROJECT SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF MASTER OF BUSINESS ADMINISTRATION In the Management of Technology Program of the Faculty of Business Administration © Tristan Sloan 2015 SIMON FRASER UNIVERSITY Summer 2015 All rights reserved. However, in accordance with the Copyright Act of Canada, this work may be reproduced, without authorization, under the conditions for Fair Dealing. Therefore, limited reproduction of this work for the purposes of private study, research, criticism, review and news reporting is likely to be in accordance with the law, particularly if cited appropriately. Approval Name: Tristan Sloan Degree: Master of Business Administration Title of Project: A Strategic Assessment of BestLine Lubricants’ Diesel Engine Treatment. Supervisory Committee: ___________________________________________ Dr. Elicia Maine Senior Supervisor Academic Director of Science & Commercialization ___________________________________________ Pek-Hooi Soh Second Reader Associate Professor, Strategy and Technology Management Date Approved: ___________________________________________ ii Abstract BestLine International Research, Inc. has recently produced evidence suggesting their engine lubricant technology may be the solution to the Engine Lubricant Industry’s challenge to find a substitute for the additive ZDDP as an anti-wear agent. In addition, BestLine has been able to validate, through third party testing, the superior performance of its aftermarket lubricants, in comparison to its direct competitors’ products. BestLine has also protected its technology through several patents.
    [Show full text]
  • Lubricant Additives: What Degree Are They Removed by Filtration Systems?
    FEATURE ARTICLE Dr. Neil Canter / Contributing Editor Lubricant additives: What degree are they removed by filtration systems? Several factors indicate that additive removal by filters is nonexistent in properly maintained lubricant systems. LUBRICANT MANUFACTURERS FACE EXTENSIVE CHALLENGES in formulating prod- ucts for their end-user customers. Several articles have been published in TLT discussing many techniques for helping lubricant companies and end-users achieve superior performance for their lubricants and production machines. One issue that has not received much attention is concern about whether filters are involved in removing additives from lubricants. There is no ques- tion that the role of filtration equipment in maintaining lubricant systems is crucial. In the November TLT, an article based on a Webinar presentation sponsored by STLE University reviewed the fundamentals of filtration.1 (avail- able digitally at www.stle.org.) Filters serve the purpose of removing contaminants from lubricant sys- tems that, if left, can significantly reduce operating life and affect the perfor- mance of production machines. The particles trapped from filters can range in size from 40 microns down to the 6-10 micron range. This latter range is the focus for most filters. Concern has been raised in the lubricant industry on an anecdotal basis that filters might also remove additives from lubricants as they remove con- taminants. Such a scenario could reduce the effectiveness of the lubricant and 26 • DECEMBER 2013 TRIBOLOGY & LUBRICATION TECHNOLOGY WWW.STLE.ORG adversely impact its application. The purpose of this article gory is most vulnerable to filter removal. The additive sup- is to gain insight from key industry experts representing the plier says, “We speculate that polar additives are more sus- additive supplier, basestock supplier, lubricant supplier and ceptible but do not know if having an ashless or filter-supplier market segments on this issue.
    [Show full text]
  • Examining Effects of Lubricant Composition in Engine Component Systems in Pursuit of Enhanced Efficiency Under Environmental Constraints
    Examining Effects of Lubricant Composition in Engine Component Systems in Pursuit of Enhanced Efficiency under Environmental Constraints 2012 Directions in Engine-Efficiency and Emissions Research Conference October 19, 2012 Dearborn, MI Victor W. Wong Massachusetts Institute of Technology Cambridge,1 MA Friction/efficiency improvement in engines require developments in multiple areas: Mechanical Design, Material and Surface Lubricant Operation: Characteristics: Formulation - Power density - Sliding, rotational speeds - Coatings, roughness, - Base oil, additives: - Component dynamics; textures, dimples, etc. Advanced control of contacts and loading in-situ properties - Fluid-film vs metal-metal and composition - Distortions, clearances, film thicknesses Lubricant CONSTRAINTS: Engine-Component appears to 1. Wear/Durability: Lubrication/Friction - Film Thickness Analysis and Design be the key 2. Emissions/Oil link to Consumption 3. Cost: Material, material & manufacturing, mechanical user operating cost design Lubricant formulation is an essential strategy in overall friction reduction and engine efficiency improvement Cooperative Agreement #DE-EE0005445 (2011-2014) Project: Lubricant Formulations to Enhance Engine Efficiency in Modern Internal Combustion Engines Lubricant DOE-NETL Goal: 10% Formulation Current Program mechanical - Base-oil, additives: efficiency requirements, improvement optimization Among other approaches investigated previously/elsewhere: Mechanical Design, component micro-geometries, operation: Material and Surface Characteristics: Our approach is to examine strategic control of lubricant properties and composition in engine in subsystems 1. Base Oil: HC’s providing basic lubrication API Groups: I, II (low S), III (low S, high VI), IV: synthetic, V other 2. Additives: - Detergents - Dispersants Additives - Anti-Wear (20-30%) - Anti-oxidants - VI and Friction Modifiers - Anti-foam - Pour-point depressants Base Oil - Extreme-pressure wear, etc Four lubricant technical themes that aim to work synergistically to advanced engine technologies: 1.
    [Show full text]
  • Pro-Spec® D. D. Motor Oil Pro-Spec® D
    PRO-SPEC® D. D. MOTOR OIL PRO-SPEC® D. D. MOTOR OIL meets or exceeds API CF-2 and provides an enhanced level of lubricant performance over the CD-II category for two-stroke cycle engines (Detroit Diesel Series 53, 71, 92, and 149). Single grade oils having less than 1% sulfated ash are preferred and primarily recommended for new Detroit Diesel design changes. Sulfated ash is related to the oil's additive composition and is significant in predicting lubricants which may cause valve distress under certain operating conditions. Most of the sulfated ash is related to total base number which measures an oil's alkalinity and ability to neutralize acid. As TBN increases, sulfated ash also increases to where lubricants with TBN's above 10 will likely have sulfated ash contents above 1.0%. It should be understood the use of PRO-SPEC® D. D. MOTOR OIL is with fuel with less than 0.5% sulphur. For fuels with higher sulphur content, use PRO-SPEC® SAE 40 with a TBN of 15. The higher TBN is necessary to offset the harmful effects of acids formed during the burning of high sulphur fuels. High Total Base Numbers are important to control deposits in four-stroke cycle diesel engines and to neutralize the effects of high sulphur fuel in all diesel engines. For two-stroke cycle engines, Detroit Diesel recommends lubricants with a sulfated ash content of 1.0% or less and TBN's between 6 and 10 for engines operating on less than 0.5% sulphur fuel. Starting in 1994, diesel fuel for U.S.
    [Show full text]
  • Chemically Modifying Vegetable Oils to Prepare Green Lubricants
    lubricants Review Chemically Modifying Vegetable Oils to Prepare Green Lubricants Gobinda Karmakar 1, Pranab Ghosh 1 and Brajendra K. Sharma 2,* ID 1 Natural Product and Polymer Chemistry Laboratory, Department of Chemistry, University of North Bengal, Darjeeling 734013, India; [email protected] (G.K.); [email protected] (P.G.) 2 Illinois Sustainable Technology Center, Prairie Research Institute, University of Illinois, Urbana-Champaign, 1 Hazelwood Drive, Champaign, IL 61820, USA * Correspondence: [email protected]; Tel.: +1-217-265-6810 Received: 13 September 2017; Accepted: 4 November 2017; Published: 7 November 2017 Abstract: Chemically modifying vegetable oils to produce an alternative to petroleum-based materials is one of the most important emerging industrial research areas today because of the adverse effects of petroleum products on the environment and the shortage of petroleum resources. Biolubricants, bioplasticizers, non-isocyanate polyurethanes, biofuel, coating materials, biocomposites, and other value-added chemicals can easily be produced by chemically modifying vegetable oils. This short review discusses using vegetable oils or their derivatives to prepare lubricants that are environmentally safe. Chemically modified vegetable oils are generally used as base fluids to formulate environmentally friendly lubricants. Reports of their application as sustainable additives have attracted special attention recently because of their enhanced multifunctional performances (single additives perform several functions, i.e., viscosity index improver, pour point depressant, antiwear products) and biodegradability compared with commercial additives. Here, we have reviewed the use of chemically modified vegetable oils as base fluids and additives to prepare a cost-effective and environmentally friendly lubricant composition. Keywords: vegetable oil; triglyceride; chemical modification; biolubricant; base stock; additive 1.
    [Show full text]