21920-3902012-30 АНГЛИЙСКИЙ ЯЗЫК USER MANUAL FOR LADA KALINA AND ITS VERSIONS

Ф. 594-1

USER MANUAL FOR LADA KALINA AND ITS VERSIONS

JSC «AVTOVAZ»• TOGLIATTI• RUSSIA TABLE OF CONTENTS

FOR YOUR ATTENTION ...... 3 Lighting control module and dipped Engine cooling system ...... 107 beam adjuster ...... 44 Braking system ...... 107 VEHICLE DESCRIPTION ...... 6 Light alarm switch ...... 46 Window washer system ...... 108 Wiper switch ...... 46 Accumulator battery ...... 109 I. BODY AND PASSENGER Rain and light sensors ...... 48 Tires and wheels ...... 110 COMPARTMENT ...... 6 Ignition starter switch ...... 50 Remote control battery Gear-change lever in manual replacement ...... 113 Keys ...... 6 transmission ...... 51 Fuse plugs' replacement ...... 113 Remote control system Gear-change lever in automatic Bulb replacement ...... 123 (in the design variant) ...... 7 transmission (in the design variant) .52 Body ...... 127 Ventilation and heating system control 53 Immobilizer ...... 10 Exterior light and exterior light alarm Ventilation and heating modes . . . . 56 Side doors ...... 12 instruments ...... 130 Multimedia system use charac- Vehicle storage ...... 130 Foot pedals location area ...... 15 teristics and features ...... 61 Seats ...... 16 VEHICLE TECHNICAL Steering wheel VEHICLE OPERATION ...... 89 SPECIFICATION ...... 131 adjustment ...... 18 Main parameters and character- Seat belts ...... 18 Number plate installation ...... 89 Safety vehicle operation basis . . . . 89 istics of 2192 «hatchback» vehicle . . 131 Air bags ...... 20 Features of vehicle operation with Main parameters and character- Installation of Child Restraints . . . . . 24 daytime running lights ...... 94 istics of 2194 «station wagon» Passenger compartment equipment 26 Vehicle driving ...... 94 vehicle ...... 134 Bonnet ...... 30 Braking and parking ...... 97 Filling values ...... 138 Tailgate ...... 31 Vehicle towing ...... 99 Passport details ...... 139 Fuel tank plug ...... 32 Defensive parking system ...... 100 Automatic transmission driving APPENDICES ...... 141 features ...... 101 II. INSTRUMENTS AND CONTROLS . . 33 1. Combustive and lubricating mate- TECHNICAL MAINTENANCE rials, approved and recommended Instrument panel ...... 33 for operation of LADA KALINA vehicle Instrument cluster ...... 37 AND OPERATING REPAIR OF THE VEHICLE ...... 105 and its versions ...... 141 Liquid crystal display (LCD) ...... 41 2. Vehicle bulbs ...... 143 Gearshift prompter function ...... 43 Engine lubrication system ...... 105 3. Heating plugs ...... 144 Trip computer control Air intake ...... 106 4. User’s manual for radio and audio (in the design variant) ...... 44 Gearbox ...... 106 file player ...... 144 FOR YOUR ATTENTION! During operation, avoid damages to the vehicle, which include those follow- ing as a result of mechanical, chemical, thermal, and other external factors, as well as traffic accidents, as these dam- ages affect the overall technical condi- tion of the vehicle, safety of its opera- Thank you for your choice and de- If necessary drive along broken-stone tion, consumer properties and ability to cision to purchase LADA. roads or hobs it is recommended to use in accordance to its purpose within Before operating your vehicle, choose the mode that: the vehicle life period specified by the please read this maintenance man- – can preserve protective covers of manufacturer. ual! It will introduce you to the fea- suspension, front wheel drive, as well Remember that every marking, tures of its design, controls, equip- as protective coverings of body from identification tags and labels on the ment, as well as safety require- being damaged with crushed aggre- parts and components of your vehicle ments and operation rules. gates; must be maintained until the end of life The vehicle has high dynamic quali- – can eliminate or minimize sharp period, otherwise the manufacturer ties, that's why in the initial period of its blows of suspension and strong tor- (the authorized person) reserves the right to refuse to satisfy the require- operation, regardless of your driving sion loads on the body. ments of the owner to repair or replace experience, you should exercise Maximum climbing is at most 30%. the defective part or component. caution until you have fully mas- The vehicle complies with the Rus- Fit for purpose and fulfilment of con- tered the technique of its driving. sian Federation and International re- sumer properties by the vehicle during quirements specified to the perform- When driving, to ensure safety traffic the life period specified by the manufac- without any accidents do not quit hold ance and safety indexes. Compliance turer is provided with a set of measures of steering wheel. with these requirements is certified by for storage, operation, care and mainte- The vehicle is intended to transport relevant authorities of the Russian nance specified by the manufacturer, people and luggage (in quantity and Federation and certificated authorities which are mandatory for the owner of weight declared by the manufacturer – of EEC countries, by issuing the the vehicle or any person using it. see the table in the section «Vehicle «Vehicle type approval», the number of Remember – you has the respon- technical specification») at ambient which is specified in the summary fac- sibility to keep the vehicle in good temperature of minus 40 0С to plus tory data table (See figure in the sec- working condition, and wherefore 45 0С on hard surface open roads. tion «Name plate data»). remind you of the obligation to

1* 3 comply with the timeliness and ity gasolines and motor oils, otherwise the vehicle log book. Certified SSNEs completeness of all maintenance it will result in bulk deposits on engine have the list of additional equip- work described in the vehicle log parts, failure of control system and ment approved for installation by book, as well as all the necessary emission reduction system compo- JSC «AVTOVAZ» and specifically current repairs. nents, failure of exhaust converter. developed technologies for its To keep the manufacturer's warran- Do not use gasolines with met- installation. Otherwise, JSC «AVTOVAZ» ty in force you should carry out mainte- alorganic antiknocks based on lead is not responsible for any possible con- nance, repair and installation of addi- (leaded petrol), iron (ferrocenes), sequences that may arise after tional equipment on the vehicle at serv- manganese, nickel and other metals. installing additional devices. ice and sales network enterprises The vehicle's engine is filled at the Remember – your safety and (SSNE) certified by the manufacturer manufacturing factory with oil of SAE safety of other road users, environ- with the mandatory mark in the vehicle 5W-30 viscosity class, designed for mental conditions, as well as ensur- log book. use in ambient temperatures of minus ing of high performance and your Certified SSNEs use service and 30 0С to plus 25 0С. If a new vehicle is vehicle life period specified by the repair technology of vehicles that was operated, including outside of this manufacturer depend on its techni- developed by JSC «AVTOVAZ»; they are temperature range, it is necessary to cal serviceability and observance of equipped with all special equipment change the oil for the recommended in operation rules set forth in this and instrument. Annex 1, without waiting for oil change manual and the vehicle log book! Timely scheduled maintenance and period according to the vehicle log The headings «Warning» and repair work essentially influences tech- book. «Attention» inform you about the con- nical condition of the vehicle, provides Do not use secondary additives ditions that can lead to personal injury durability and performance character- to gasolines and lubricating oils. or damage to your vehicle. The head- istics of the vehicle. After the mainte- The owner of the vehicle bears the ing «Warning» means that irregular nance check that the personnel, carry- responsibility for the use of poor-quali- actions might result in personal injury, ing out it, added all the corresponding ty gasolines and oils. Carry out installa- «Attention» – irregular actions might notes in the vehicle log book. tion of any additional devices on the result in damage to your vehicle. During operation and maintenance vehicle, as well as replacement, The vehicle design is constantly being of the vehicle use the materials the list modification of hardware or soft- improved, so separate parts and assem- of which is specified in this manual. ware of EECS controller at the certi- blies, as well as design variants and During the operation of the vehicle fied SSNEs with the mandatory mark complete equipment may differ slightly use only recommended and high-qual- in the section «Observation page» of from those described in the manual. For 4 more information about your vehicle, please contact your vendor. Do not switch off the speed sen- sor and do not change data on operational kilometres in the odometer readings without an authorization as it will result in the loss of the manufacturer's warranty and possible failure of the vehicle. In case of faults affecting traffic safety, under which it is prohibited to operate the vehicle, use service of vehicle carrier.

5 VEHICLE DESCRIPTION

I. BODY AND PASSENGER COMPARTMENT

KEYS Fig. 1а. Vehicle keys Fig. 1b. Vehicle keys (in the design variant) The vehicle comes with two igni- tion keys (Fig. 1a) with special en- key with remote control console (Fig. ATTENTION! coders built in the key head. The ig- 1b), which performs all these func- The ignition switch key with a nition switch key with a black mark on tions. red mark on the end should be the end combines the functions of: The key with a red mark combines stored separately and be not kept – the key of the door locks and the the functions of: in one bunch with the working tailgate; – the key of the door locks and the key. It should be used only if the – the ignition switch key; tailgate; working key has been lost. – the working key of the immobi- – the ignition switch key; lizer *. – the training key of the immobi- In the design variant instead of lizer. the ignition switch key with a black mark on the end the vehicle has the Key number is applied to the label. Remove and save the label. According to this number, you can order a new key – contact any certi- * The immobilizer blocks engine start and pro- vides additional protection against unauthorized fied SSNE. use of the vehicle. Remember that the immobilizer New ignition switch keys to re- is only an additional barrier to misfeaser and does not provide an absolute and complete protection place lost ones are made at the of your vehicle against the unauthorized use. consumer's cost. 6 REMOTE CONTROL SYSTEM Remote control system (in the design variant) operation

The remote control system by 1. Locking side doors and power pack is designed for: switching on protection mode – remote locking (unlocking) of (in the design variant) with the side doors with simultaneous switch- help of remote control console. ing on (off) of the vehicle protection To lock side doors and switch on mode; protection mode press lock button – locking side doors by turning the Fig. 2. Remote control console on the console. In this case, side key in the driver's door lock; doors will be locked and at the same – locking (unlocking) side doors time protection mode will be with the button from inside the vehi- switched on, as evidenced by single ATTENTION! cle; flashing of turn indicators and slow – switching on alarm system in Selling any vehicle equipped flashing of immobilizer state LED cases of violating protection zones of with remote control system, with- in the instrument cluster. the vehicle; out training remote control con- If any side door, bonnet or tailgate – switching off alarm system re- soles is not allowed. Training of (in the design variant) is open when motely or after switching ignition with remote control consoles must be switching on protection mode (in the your key; carried out at vehicle presales design variant), turn indicators will – remote control of electric win- training points or at certified flash three times and a single horn dow regulators. SSNEs in the presence of the will be given. In order to include open To operate the remote control owner of the vehicle, if the vehicle zones into the protection zone, close console (Fig. 2) in the vehicle it owner chooses not to carry out them. The system will behave in the should be activated (trained) using this procedure, his/her refusal same way if actuating overheat con- the training code key (see the sec- must be recorded in the vehicle trol of side doors locks, if locking tion «Immobilizer»). After training the log book signed by the dealer, (unlocking) is carried out many times remote control console is also a affixed with the company's seal in a short period of time. In this case, working code key of the immobilizer and signed by the owner. If the wait for a while, whereafter the sys- and serves to unlock engine start. owner of the vehicle loses the tem operation will be fully restored. Training and operation of the system training code key, no claims for 2. Unlocking side doors and can be carried out simultaneously remote control system quality are switching off protection mode with 4 remote control consoles. accepted. with remote control console. 7 Unlocking side doors of the vehi- If the buzzer gives one horn, there for 25 seconds. If during this time the cle with the help of remote control is set the mode of side doors' simul- tailgate has not been opened, it is console can be carried out in two taneous unlocking, if the buzzer automatically included into the pro- modes: gives two horns, there is set the tection zone. If, within 25 seconds, – step unlocking (factory deliv- mode of side doors' step unlocking. the tailgate has being opened, then ery); Each time you change unlocking this protection zone will be switched – simultaneous unlocking (partic- mode, it changes for the opposite to off until it is closed. To close the tail- ular procedure is required – see the previously set. gate shut it again. below). If, after unlocking side doors and 4. Central locking and unlock- In the step unlocking mode, to switching off protection mode, no ing of side doors from inside the unlock driver's door and switch off side door or tailgate will be open, vehicle (in the design variant). protection mode with remote control and the ignition will not be switched, To lock side doors from inside the console, press unlock button on then after a certain time (about 25 vehicle pull down lock button in the the console. Driver's door will be seconds), side doors will be locked driver's door or press lock button unlocked and protection mode will again and the system will automati- in the switch box or (in the design be accompanied by two-time flash- cally change for protection mode. variant) button in the driver's ing of turn indicators. Automatic switching of the system to door module. To unlock passenger doors, press the protection mode with side doors To unlock driver's door from unlock button on the console locking is provided with frequent inside the vehicle, pull up lock button once more. flashing of immobilizer LED in in the driver's door. To unlock all side In the simultaneous unlocking the instrument cluster. doors, press unlock button in the mode all side doors of the vehicle are 3. Opening tailgate lock with switch box or (in the design vari- simultaneously unlocked when pres- remote control console (in the ant) button in the driver's door sing unlock button for the first time. design variant). module. To change unlocking mode follow Unlocking tail gate with remote Central locking has side doors' the procedure: control console is only possible when protection against overheating. If – switch the ignition with the key the ignition is off. To open tail gate, locking and unlocking occur many with the console; press twice or press and hold the times in a short period of time, the – press and hold lock and unlock button for a while on the system stops responding to buttons' buttons of side doors on the con- remote control console. pressing. If this has happened, do sole for about 5 seconds ; With protection mode on, tail gate not press the button for a while, – after the buzzer gives horns is opened and protection zone is whereafter the system operation will release the buttons. switched off at the same time about be fully restored. To ensure safety 8 the last executed command is always unlocking rear doors is possible in the protection mode. Protection an unlock command. both with the door closed and mode is turned off after pressing 5. Central locking/unlocking opened). unlock button on the console. of side doors from outside with 6. System operation in protec- 7. Remote control of electric the key (with no remote control tion mode. window regulators (in the design console). After activating protection mode variant). To lock side doors from outside the system monitors the state of the Electric window regulators are the vehicle, turn the key in the dri- following protection areas: operated with remote control buttons ver's door in a clockwise direction. – side doors; if the ignition is off. When turning the key counterclock- – bonnet; Windows are rolled up while hold- wise you will unlock only the driver's – tailgate; ing lock button down for more door or all side doors, depending on – ignition starter switch; than three seconds. First, front door the unlock mode (see paragraph 2). – driver's door lock; windows are rolled up, then rear door ones. ATTENTION! – battery voltage. Windows are rolled down while If you do need to lock or unlock If in the protection mode any of the following actions occurs: holding unlock button down for side doors mechanically (for more than three seconds. First, front example, lack of supply in the – opening any side door; – opening the bonnet; door windows are rolled down, then vehicle onboard system) do the rear door ones. following: – opening the tailgate; – to lock front doors pull down – switching on the ignition without Warning button 1 (see Fig. 4 and 5) by using the «native» key; Keep remote control console hand or by turning the key from – unlocking the driver's door; away from children in order to outside the vehicle, to unlock the – connecting accumulator battery prevent unauthorized switching door pull up button 1 by hand or after it is turned off, the alarm system of electric window regulators. by turning the key from outside is activated as light alarm with turn When rolling up and down win- the vehicle (locking/unlocking indicators and as acoustic alarm with dows with the help of the console, front doors is only possible with horn of the vehicle for about 30 sec- be aware that the console oper- the door closed); onds. ates in the area of short range – on rear doors pull down but- A single press of any button on the from the vehicle in this mode. This ton 1 (see Fig. 7) by hand to lock console when the system is in the is due to safety and protection the doors, pull up button 1 to alarm mode, results in turning off against accidental pinching of unlock the doors (locking/ alarm signals, but the system is still passengers with the window. 9 8. Key code synchronization. IMMOBILIZER bilizer activation must be carried If pressing buttons on the console out at the vehicle presales train- beyond the reach of the radio chan- For LADA vehicles there is used an ing points or at the certified nel, «floating» code counter in the electronic immobilizer (implemented SSNEs in the presence of the console goes out of synchronization in the instrument cluster), providing owner of the vehicle; if the owner with the counter in the system con- their additional protection against of the vehicle chooses not to trol unit. If the number of presses on unauthorized use by blocking the carry out this procedure, his/her the console out of signal detection engine start. refusal must be recorded in the range exceeded 1,000, the system Your LADA vehicle is supplied with vehicle log book signed by the stops responding to commands of two ignition switch keys (see the sec- dealer, affixed with the compa- the console. In this case, repeat the tion «Keys»). ny's seal and signed by the procedure for re-training of the con- One ignition switch key with a owner. sole at any certified SSNE. black mark on the end or with a As the training key is important remote control console (in the it is not recommended to use the design variant) is a working key. It is ignition key with a red mark for used for unlocking engine start. This daily trips. It must be kept in a key is recommended to use for safe place. If you lose the training everyday trips. key, warranties for immobilizer, The second ignition switch key engine controller, driver's door with a red mark on the end is a train- module (in the design variant) are ing key. It is used for unlocking not accepted. Do not install alarm engine start, as well as for activating system, protection and other (training, re-training) immobilizer additional electrical and electron- and (in the design variant) remote ic devices by cutting and twisting control system of doors' locking wires (without use of regular (unlocking). pads) or by passing regular con- It is possible training and opera- trol unit of doors' locking. Failure tion of the immobilizer, with the num- of gear reducer of door locking, ber of 1 to 4 working keys. gear reducers' control unit, body electronics main unit (in the ATTENTION! design variant) due to improper Selling any vehicle equipped connection of additional devices with an immobilizer without its is not covered by the factory war- activation is not allowed. Immo- ranty. 10 Immobilizer has a LED and an alarm sounder (a buzzer) in the instrument cluster. The LED indicates the state of the immobilizer: – if after switching the ignition the LED does not light and flash, it means the immobilizer is OK, engine start is allowed; – if after switching the ignition the LED flashes, lights for about 15 sec- onds and goes out, then the immobi- lizer is deactivated, engine start lock mode does not work; you should contact any certified SSNE to acti- vate the immobilizer; – if after switching the ignition the LED flashes, the immobilizer is faulty. Failure of the immobilizer is addition- ally diagnosed with short horns of the buzzer. You should contact any certi- fied SSNE to correct the fault.

ATTENTION! To ensure stable reading of ignition switch key code with the immobilizer, do not attach two or more ignition switch keys to one ring. Switching off the ignition with the training key leads to flashing the immobilizer LED that is not a failure. 11 SIDE DOORS

Side doors can be locked /unlocked from inside the vehicle by pressing buttons / respective- ly in the switch box (See Fig. 6а) or (in the design variant) by pressing button in the driver's door mod- ule (Fig. 6b); pressing this button you change the state of doors' locks. Locking front doors is possible only if Fig. 3. Opening the door Fig. 4. Left hand front door the doors are closed. Side doors are opened from the will be automatically set to middle outside – with the help of the handle position, and the window will be in the direction of the arrow (Fig. 3), stopped at any position you have and from the inside – by turning over selected. internal handle 2 (Figs. 4 and 5). If the door is locked, the handle is idle. Driver's door module To roll up and down windows of (in the design variant) front and rear doors (in the design variant) use switch buttons of elec- Assignment of driver's door mod- tric window regulators on door trim ule (DDM) switches as shown in Fig. 5. Right hand front door panels. To roll up any window just Fig. 6b: pull up appropriate power window 1 – electric mirror control switch switch: on the passenger's door trim (joystick) in the horizontal and verti- 8 – lock and unlock button for panel, or in the switch box (Fig. 6а) cal directions; side doors of the vehicle; or (in the design variant) in the dri- 2, 3 – selection buttons of mirror 9 – power on or off button for rear ver's door module (Fig. 6b). To roll for control (right or left); power windows. down any window, press down 4–7 – window regulator control To control mirrors you need to appropriate power window switch. buttons (corresponding to the loca- switch on the ignition and press After stopping pressing the button tion of windows in the vehicle); appropriate button to select a mirror. 12 Fig. 6а. Switchbox Fig. 6b. Driver's door module (in the design variant)

Select button 2 ( ) – if you want to Power windows' control features Window regulators stop operating control the left-hand mirror or button with control buttons in the doors if 3 ( ) – if you want to control right- Power windows' control buttons the ignition is off after opening any hand mirror. Pressing the button its have 3 positions: front door or after switching on the letter will be highlighted with orange 1. «Rolling up the window» (not protection mode. for some time, it means that you can fixed end position); Window regulators can operate with the ignition off and the door control the selected mirror. If the light 2. «Off» (fixed centre position); opened only with the help of the goes out, it means you cannot con- 3. «Rolling down the window» (not remote control console (see the sec- trol the mirror, if necessary, press the fixed end position); button again. After switching off the tion «Remote control system»). To roll down the window, press the ignition you can still control the mir- button, to roll up the window – pull up ror for about 90 seconds if no door has been opened. In any case, you the button. can control mirrors only if the letters Power windows operate: 2 or 3 are highlighted. – as long as the ignition is To control mirror position, use joy- switched on; stick 1. It is necessary to achieve the – within 30 seconds after switch- desired position of the mirror, by turn ing off the ignition, if during this peri- pressing one of the ticks. od no front door has been opened. 13 Automatic mode of rolling Rolling up/down windows with the Warning up/down windows with DDM button in the passenger's door is When closing windows with buttons* similar to the work of DDM buttons power windows you can pinch with the following restrictions: your fingers and other body parts If press driver's window control – it is controlled only the window that could result in serious injury. button in the mode of rolling up/ of the door, which has the button; Therefore, when using power down no more than 1.5 seconds, – it is impossible to control with windows, be careful especially if then the window will stop. If this time the button in the passenger's door as there are children in your vehicle exceeds 1.5 seconds, then the win- long as you control the same window or next to it. Make sure that the dow will continue to move automati- or other window of the same board window you roll up will pinch noth- cally until it detects the obstacle (see with DDM; ing. In the case of pinching, the relevant section), but for a time – it is impossible to control with immediately stop rolling up the not exceeding 10 seconds. the buttons of rear passenger's window and turn on the necessary To control front passenger's door doors if the lock mode of their work is mode to roll it down. right-hand window with DDM button enable (see below). The driver of the vehicle has there is implemented automatic To enable power window control the responsibility for improper rolling down mode, which works sim- with switches, located in the rear use of power windows. He/she ilar to the mode of rolling down dri- doors (in the design variant), you should explain to passengers ver's door window. should press button 9 in DDM, its let- rules of use and warn them of Automatic mode of rolling ter will be highlighted with orange. To dangers in case of improper use up/down windows is stopped when enable power window control with of power windows. rolling up them until they stop or switches located in the rear doors, Do not allow children to use detect an obstacle and/or when you should press button 9 in DDM power window switches! pressing any window regulator con- again. Orange light of button's letter Getting out of the car, be sure trol button on DDM. will go off. Lock mode for operating to remove the key from the igni- rear door buttons is stored after tion switch to turn off power win- switching off/on the ignition and the dows and avoid accidental injury. * Automatic mode of rolling up/down is ini- power supply of the system. As a warning about a left ignition tially implemented in the factory delivery of It is possible to control simultane- key, when opening the driver's DDM. Window regulator automatic control mode can be disable with diagnostic tester at ously two power windows, located on door, the buzzer of the immobiliz- certified SSNEs. different sides of the vehicle. er gives a horn. Also the buzzer 14 will give the horn, but in a differ- ent tone, if you remove the igni- tion key and leave tail lights switched on. Do not lean out of open win- dows of the vehicle, make sure that the children do not do it.

Rear doors are locked both with the door opened and closed. To roll up and down rear door win- dows use power (see above) or man- Fig. 7. Rear door Fig. 8. Latch hook spline ual windows, which are activated with handle 2. FOOT PEDALS ver's seat. When braking any The rear door window is not fully LOCATION AREA object may fall in the area of ped- rolled down. als location and interfere with If there are the children in the rear Foot pedals normal operating of them. If nec- seat, be sure to turn the latch hook essary prevent a crash or quickly spline 1 with the key (Fig. 8) around When operating pedals of accel- make a maneuver you will not be 450 until it stops. Moreover, you able to brake hard, depress the should turn the latch hook clockwise erator, brake and clutch (see Fig. clutch or open up the engine. in the right-hand door, and counter- 30a, 30b, positions 17, 16 and 14), clockwise in the left-hand door. In nothing should interfere with their full Shoes for driving this case, with the lock button pulled stroke. up, the door is opened only from the Use only the mats on the floor, Wear shoes to your feet to drive in outside and the internal handle is which do not interfere with normal a confident and comfortable way. idle. For the doors to be opened from operating of pedals and can be se- the inside turn the latch hook spline cured. in the opposite direction. ATTENTION! Do not place any objects on the floor in front of and under the dri- 15 SEATS

Front seats. To adjust front seats in the longitudinal direction, pull locking lever 1 (Fig. 9) up. After installing the seat in a comfortable position pull the lever down, and by shifting movement of the seat back and forth, fix it reliably.

Front seat height adjustment Fig. 9. Front seat Fig. 9a. Front seat In the design variant the car has (in the design variant) function of the front seat height adjustment. In order to change seat In the design variant front seats for very tall people it is necessary to cushion inclination and position it is are equipped with electric heaters pull up the head restraint to its high- necessary to raise or lower lever that are switched on if the engine est position, and for very short peo- (Fig. 9a), placed at the seat cushion runs with switches 1 (Fig. 10). ple it is necessary to pull down the outer side. In order to lower the seat To adjust head restraint (Fig. 11a) head restraint to its lowest position. cushion press the lever down sever- up/down it is necessary to use the Warning al times. In order to raise the seat lever of the head restraint. To adjus the head restraint down, press lock Drive with well-adjusted head- cushion pull the lever up several rests only. times. lever 1 of the head restraint from the right side. To remove the head Rear seats. To expand luggage Warning restraint from the seat back, move compartment you can fold the back Never adjust driver's seat while the head restraint to its highest posi- seat. Rear seats headrests are driving. The seat can be moved tion and press the lock lever of the adjusted and removed by analogy the suddenly out of its location that head restraint from the right side. front seats headrests (fig.11с). will result in loss of vehicle con- The best position of the head In the design variant each of the trol. restraint – when its top edge is on the two parts of the seat can be folded The seat back is adjusted by step- same level with the top of the head separately, if necessary. When fold- less rotation of handle 2. (Fig. 11b). If this cannot be achieved, ing up any part of the rear seat to 16 Fig. 10. Front seat heating Fig. 11a. Head restraint Fig. 11c. Rear headrest switches

transport goods, only one passenger can be in the remaining part. Before rear seat (or its parts) spreading it is necessary to pass the bands of 2 rear side belts (fig.11d) through the retainers of 1 band (in the design variant), remove the central belt tongue from the mini- lock (see Fig. 15b) and install all locks to special holders on the bot- Fig. 11b. The headrest best position Fig. 11d. Seat belt retainer tom side of the back. To remove the (in the design variant) belt tongue press the button on the side of the mini-lock with a sharp After setting the seat to its operat- Warning object, for example, the ignition key. ing position the belt locks must be Seatbelts should not be at the When returning the seat back to its removed from the holders, and the back when you return it to the work- operating position you should ensure central belt tongue must be inserted ing position to use them for intend- that shoulder branches of side belts into the mini-lock, aligning direction- ed purpose and to avoid damage to have not fallen behind the back. al arrows. belt bands with the back lock.

2 Р.Э.-21920, англ. яз. 17 Fig. 12. Folding the rear seat

Rear seat should be folded in the STEERING WHEEL Fig. 13. Steering wheel following sequence: ADJUSTMENT adjustment – remove the head restraints from the seat back (in the design vari- The vehicle is equipped with tilt ant); steering column. To select the best – pull strap 4 (Fig. 12) and set seat position of the steering wheel pull SEAT BELTS cushion 1 to the vertical position. If locking handle 1 down (Fig. 13) and, necessary, move front seats forward; after setting the steering wheel to the Seat belts are an effective protec- – pull lock drive lever 3 and fold desired position, fix the steering col- tion of the driver and passengers back 2 to the horizontal position. umn by moving the handle to its against serious consequences of Setting the rear seat to its normal highest position. road traffic accidents (RTA). position must be carried out in re- To fasten the belt, pull it out verse order. Warning Steering column adjustment smoothly, holding the belt tongue must be carried out only in the (Fig. 14), and insert tongue 2 (Fig. stationary vehicle. 15а) into lock 1 until it clicks; avoid twisting the bands. Make sure that the lower belt strap bears against your hips. It is not allowed that the lower belt band passes around the waist or under the hips. 18 Fig. 14. Stretching the seat belt Fig. 15а. Fastening the seat belt Fig. 15b. Fastening the seat belt in the mini-lock of back middle seat passenger

To unfasten the belt press the red Front seat belts are adjustable the driver and front passenger in a button of the lock, the belt will be with the top point position according frontal crash. Load limiter is de- automatically pulled into the reel. If to the height. Slightly stretching the signed to reduce maximum effort of the belt band is not properly pulled belt, adjust its height so that it can be holding the driver and front passen- in, then holding belt tongue 2 in as high as possible, but cannot touch ger in a frontal crash. hand, find the belt band position in your neck and squeeze your shoul- which it will completely be back into der. To adjust the belt press its deco- the reel. rative moulding 1 to the pillar (Fig. 16), and moving it select one of the ATTENTION! five fixed mounting positions of the Leaving the car make sure that top point according to the height. the belt has been fully backed to In the design variant the vehicle its initial position not to take out is equipped with front seat belts with the band and avoid damage it pretensioner and load limiter, located when closing the doors of the in the reels of front seat belts. Front vehicle. In this case the seat belt seat belt tensioners are designed to may be unsuitable for further use. select possible sag of the band for

2* 19 Warning AIR BAGS When driving be sure to fasten your seat belt and do not carry The vehicle is equipped with fron- unbelted passengers! tal system of driver's air bag (ABS), Pregnant women should never in the design variant of front pas- put the lower band of the belt to senger's air bag, side air bags of the the abdominal region where the driver and front passenger, as well as fetus is, or above the abdomen! front seat belts with pretentioner and If straps are dirty clean them load limiter. When actuating the ABS with a soft soapy solution. Do not in a very short period of time front iron belt bands! The belt must be seat belts are pulled in to secure the Fig. 16. Adjusting the seat belt replaced with a new one if it was driver and the passenger safety; air subjected to critical stress in a bags are filled up with gas that, being road traffic accident or has opened, reduce the risk of injury to the upper body and head of the driv- Back seat passengers should fas- scrapes, ruptures and other dam- er and the front passenger. The ABS ten side seat belts similar to front ages. actuates in frontal crashes of the ones. For middle passenger there is Pretensioners actuate regard- vehicle or side crashes when it is provided a special design belt – with less of whether the seat belt is fastened in the lock or not. necessary to enhance safety of the two belt tongues. Under normal Unauthorized use of preten- driver and the front passenger. operating conditions of the vehicle, tioners and load limiters of front The ABS is marked with sign AIR- the belt of the middle passenger seat belts is prohibited. All work BAG on the cover of the steering must always be in the initial position, on them should be performed wheel, sign SRS AIRBAG on the wherein the first tongue is inserted only at certified SSNEs by spe- cover of the instrument panel and into the mini-lock (Fig. 15b). Middle cially trained personnel. sign AIRBAG on the seat belt band. seat belt is fastened similar to the When fastening seat belts be Air bag system (ABS), depend- belts of front or back side passen- sure to adhere to the instructions ing on the version, has the follow- gers. of this manual (do not place the ing: Pregnant women should always diagonal part of the belt behind – driver's air bag module mounted use femoral and shoulder belts, if your back or the seat back, do not in the steering wheel; their doctor allows it. Femoral part of place the lower part of the belt – air bag module, located in the the belt should be as low and con- under the hips or the seat cush- instrument panel above the glove venient as possible. ion, etc.). box; 20 – air bag modules in the front seats; – seat belts with pretensioner and Impact with curb, or footpath Falling or shaking on the load limiter; edge, or solid material deep potholes – rotating device mounted on the connector of understeering switch (for connecting horn switch and air bag module to the vehicle circuit); – ABS control and diagnostic unit Hard landing or falling of the vehicle from high spot mounted on the tunnel of the body floor under the console of instrument Fig. 17а. Areas of coverage and Fig. 17b. Examples for ABS panel; operating of ABS (highlighted) actuating situations – ABS diagnostics LED in the in- strument cluster. Examples for ABS actuating situa- impacts of the vehicle, that is in Air bags are an additional means tions (Fig. 17b): cases where the system can of protection to the driver and the – crash with stationary non- enhance to safety. front passenger fastened with seat deformable obstruction: air bag can The degree of damage to the vehi- belts; they actuate in a severe frontal deploy at low speed; cle body in a crash (or absence of or side crash: – crash with non-fixed deformable serious damage) is not always a sign obstruction (for example, with anoth- of normal or abnormal operation of – starting with specific severity of er vehicle): air bag deploys only at crash; front air bags. high speed of the vehicle; When the air bag deploys the dan- – in coverage areas shown in – in case of hard impact affecting ger of visibility restriction for the driv- Figure 17a (highlighted). the vehicle in front, some examples er is virtually absent, as the air bag is ABS must actuate in case of are shown in Figure 17b. ABS does not work with: filled and emptied in a short period of severe frontal impacts and side time. crash. However, ABS may also actu- – the ignition off; – insufficient impact of frontal and The air bag provides optimal pro- ate in other emergency situations, if side crashes; tection if the seat, seat back and the vehicle experiences impacts sim- – roll over; head restraint are installed properly. ilar to those to which it is subjected in – side impacts (in the design All the back should be borne on the a severe frontal impact or side crash. variant with no air bags) or rearward seat back and the seat should be 21 moved as back as possible to the you the safest sitting position in 7. After actuating air bags, driver, in order to have a possibility to which the air bag can provide the some elements of the system may hold the steering wheel in hands most effective protection. be of high temperature. To avoid slightly bent at the elbows being in 2. Do not attach any objects to burns, do not touch hot parts. the upright sitting position. You the steering wheel and the instru- 8. Skin surfaces, which have should move back the front passen- ment panel, because they can signs of irritation, should be thor- ger's seat as fast as possible and set cause injury while the air bag oughly washed with a soap solu- the seat back to the vertical position deploys. The same danger exists tion. If eye irritation, wash them so as not to have inconvenience and in cases when the driver or the with clean water. In case of discomfort. Improper sitting in the passenger smokes a pipe or uses steady troubles you should seek event of airbag deployment could a mobile phone while driving. medical attention. result in serious injury or death. Air 3. When driving, do not put 9. When scrappaging the vehi- your forearm/palms to the place bags are needed in space to be filled cle it is required to dismantle ABS where the air bag is mounted. with gas. units at the SSNE. 4. When driving the front seat ABS is a single-use self-contained front seats passenger must not bear on the In the design variant unit and requires no maintenance are equipped with side air bags. Side during operation of the vehicle. After instrument panel and hold any objects that may cause injury if air bags are designed to provide actuating ABS the control unit and additional protection for the driver airbag modules, seat belts with pre- the ABS actuates. 5. The ABS diagnostics LED and/or front seat passenger in the tensioner must be replaced at any event of side crash (in addition to the certified SSNE. must be switched on for 3-4 sec- onds after switching the ignition protection provided by seat belts). ATTENTION! and then be switched off. Side air bags do not deploy on all 1. Air bag does not replace Subsequent switching of the side impacts; they deploy only on seat belt, it only serves as its diagnostics LED during operation those side impacts that are danger- additional installation that is why of the vehicle means that there ous for the driver and passengers. has been detected a fault in the always wear your seat belt. Those Warning who do not use seat belts, run the ABS, that's why its activation in a risk of suffering more severe frontal crash is not guaranteed. Do not allow passengers to injuries or even being thrown out 6. Do not affect the ABS. All lean out of doors, put any objects of the vehicle in road accidents, it work on it should be performed between doors and passengers, if might result in death. In a road only at certified SSNEs by spe- they are on seats equipped with accident the belt helps to ensure cially trained personnel. side air bags. 22 Side air bag is used as an addi- gerous and cause injury in the tional installation to seat belts of event of actuating side air bag. the driver and the passenger. To prevent unexpected side air Therefore, during driving always bag deployment that can lead to wear seat belts. Air bags deploy injury, avoid impacts with side only in case of certain side impact sensor, located in the cen- impacts that endanger safety of tre pillar, with the ignition on. the driver and passengers. If the seat or its upholstery is To ensure the best protection damaged you should contact any against side impact and preven- certified SSNE. tion of injuries as a result of actu- Do not break down and change ating side air bag the driver and seat construction and interior front seat passenger should sit trim elements. These procedures straight and be properly fastened must be carried out by qualified with seat belts. Driver's arms personnel at certified SSNE. should hold the steering wheel in the positions of 9:00 and 3:00. Passenger should keep hands and arms on his/her hips. Do not put any additional cov- ers on seats. The use of covers can reduce system efficiency down to zero. Do not install any accessories on the sides of the passenger com- partment or near side air bags. Do not place any objects over the air bag or between it and yourself. Do not place any objects (an umbrella, a bag, etc.) between the front door and the front seat. Such objects can become dan- 23 INSTALLATION Table 1 OF CHILD RESTRAINTS Scheme of child restraints installation

In your vehicles are used standard Seats in vehicle

seat belts of adult passengers to fas- Weight of child Type of child seat front passenger seat rear seats of passengers ten child restraints. without with airbag side middle Save placement of children in vehi- airbag cle is only possible using child rest- Category «0» < 10 kg Transverse cradle ХХUХ raints, that meet the requirements (approximately 0-6 months) of European standard ЕСЕ R44. Category «0+» < 13 kg Rear-facing seat UХUU Choosing child restraint system is (approximately 6-18 months) necessary to use information, given Category «1» 9-18 kg Rear-facing seat UХUU (approximately 9 months – in the table 1 «scheme of installation 3,5 years) child restraints». Seat, adjustable in the direction UF UF UF UF Installation and operation of child of movement restraint must be realized in accor- Category «2» 15-25 kg Seat, adjustable in the direction UF UF UF UF dance with manufacturer’ instruction (approximately 3,5...6 years) of movement for child restraints. Category «3» 22-36 kg Seat, adjustable in the direction UF UF UF UF (approximately 6...12 years) of movement

Caution U – place is suitable for installation of «universal» child restraint, with rear-facing installation, 1. Do not use child restraint on and officially approved for this weight category. the right front seat, where child UF – place is suitable for «universal» child restraint installed in the direction of movement and seats facing upstream move- officially approved for this weight category. ment. Right front seat is protect- Х – place is not suitable for child restraint installation. ed by active airbag. 2. Do not keep the child on your knees while driving. 3. The most safety transporta- tion of children under the age 12 4. Before the installation of in position, where the lower barrel is on the back seat, using child child’s restraint on the place of bolt is inserted in mini-castle, restraint, according to the age rear center passenger seat, a belt then to follow the instructions and weight of child. of rear center passenger must be of child restraint. 24 Child seat installation with ISOFIX Table 1a system and mounting of ISOFIX Scheme of ISOFIX child restraints installation

upper safety belt Places of fastening system Weight ISOFIX in vehicle Your vehicle is equipped with ISOFIX dimensional class fastener system ISOFIX, located of child right place Left place on rear seats, which allow to of rear seat of rear seat install child restraints with fas- Category «0» F (transverse cradle) XX tener ISOFIX and meet require- < 10 kg G (transverse cradle) XX ments of European standard ЕСЕ (approximately R44 (for children, with weight less 0-6 months) E (Rear-facing seat) IL (1) IL(1) than 18 kg). Category «0+» E (Rear-facing seat) IL(1) IL (1) Fastener system ISOFIX consists < 13 kg of two lower supports ISOFIX and a (approximately D (Rear-facing seat) XX support for upper safety belt ISOFIX. 6-18 months) C (Rear-facing seat) XX Lower supports ISOFIX, joined by D (Rear-facing seat) XX appropriate holder of child restraint Category «1» ISOFIX, are located at the bottom of 9-18 kg С (Rear-facing seat) XX rear backrest seat. (approximately 9 months – В (Seat, adjustable in the direction of movement) IUF IUF Their position is marked on the 3,5 years) back by round pictogram . Before В1 (Seat, adjustable in the direction of movement) IUF IUF attachment of child restraint fastener А (Seat, adjustable in the direction of movement) IUF IUF ISOFIX is necessary to release the IUF – place is suitable for installation of «universal» child restraint ISOFIX in this dimensional class. zone of lower supports ISOFIX by X – place is not suitable for ISOFIX child restraint installation. IL – place is suitable for installation of «universal» child restraint ISOFIX in this dimensional class. placing of rear safety belts’ locks at 1 – on the date of publication, recommended ISOFIX child restraint in this dimensional class is the child seat the junction line of seat cushion and «Britax Romer Baby Safe». rear backrest seat. The support for upper safety belt in the table 1a «Scheme of ISOFIX tion and its fasteners, built-in ISOFIX is located at the bottom of rear child restraints installation». ISOFIX ISOFIX child restraint, the fasten- backrest seat at the side of luggage child restraint can be installed in your ers should not damage rear compartment. After fixing of upper vehicle only if it meets the require- seat’s safety belt. ments of European standard ЕСЕ R44. safety belt ISOFIX to regulate its ten- Operation of ISOFIX child sion according to manufacturer’s Caution instruction of child restraint ISOFIX. restraint must be in accordance Selecting child restraint ISOFIX is You should follow the process with manufacturer’s instruction necessary to use information, given of ISOFIX child restraint installa- of ISOFIX child restraint. 25 PASSENGER COMPARTMENT EQUIPMENT

Exterior mirrors

Exterior mirrors are adjusted with handle 1 (Fig. 18). Before driving en- sure optimum visibility to the rear. In the design variant there is no handle 1, and exterior mirrors are adjusted with switch 1 (see Fig. 6b) in the driver's door module (see the section «Driver's door module»). Fig. 18. Exterior mirror Fig. 19. Interior mirror In the design variant heating of rear window and exterior mirrors is switched on at the same time. – roof light is on and burns and off smoothly when closing the Interior mirror continuously, until it is off. driver’s door (all doors – in the In the middle position of switch 1 design variant). Interior mirror is adjusted by rotat- the roof light is off. With ignition off, the roof light is on ing around the joint. When glaring – interior roof light is on and off and off smoothly within 15 seconds, if with headlights of transport moving the driver’s door (none of doors – in automatically when opening and behind, set the mirror to antidazzle designed variant) was not opened. closing the driver's door. position by pressing lever 1 (Fig. 19). With ignition on the interior roof In the design variant: In the design variant there is in- light burns, if the driver’s door is stalled the interior mirror without – roof light is on and burns opened (any of doors – in the lever 1, with the coating of antidazzle continuously, until it is off. effect. design variant). In the middle position of switch 1 After closing the driver’s door (all the roof light is off. Interior roof lighting doors – in the design variant) the – with the ignition on, the inte- roof light: The operation mode of interior rior roof light is on smoothly when – burns on within 25 seconds (off roof lighting (Fig. 20а) depends on opening the driver’s door (any of delay), and then goes out smo- the position of switch 1. side doors – in the design variant) othly; 26 Fig. 20а. Interior roof lighting Fig. 20b. Interior lighting unit Fig. 21. Sun visor

– goes out smoothly when ignition Operation mode of the interior In the design variant vehicles on; lighting unit depends on the position have power save function for interior – goes out smoothly when protec- of switch 2: lighting devices (interior proof lights, tion mode on (in the design variant). – roof light is on and burns side glove box lights and luggage – the roof light burns on according continuously, until it is off. compartment lights); which switches to the algorithm, described above. o – section of general lighting is off their power supply approximately In the design variant instead of off. in 10 minutes after ignition off. – with the ignition on, section the roof light there is installed the of general interior lighting is on and interior lighting unit (Fig. 20b), which off automatically when opening and Sun visors includes sections of individual light- closing the side doors. With the igni- ing for the driver's and front passen- tion off, section of general interior Sun visors, depending on the ger's seats and one section of the lighting burns if any of doors is direction of sun rays, can be general interior lighting. Left and opened. After closing all doors the changed from position I (Fig. 21) to right sections of individual lighting section of general interior lighting positions II or III. In the design vari- are switched on/off by pressing left burns on for about 10 seconds and ant there is a vanity mirror inside the 1 or right 3 buttons, respectively. then goes out smoothly. passenger's sun visor. 27 Fig. 22а. Side glove box Fig. 22b. Main glove box Fig. 23а. Socket for additional electrical equipment (in the design variant)

Glove boxes 23а), which is used to connect only out the spiral. In this case, 12-volt electrical appliances with bimetallic fuse of the cigarette To open side glove box, you need power output of at most 120 W. lighter will actuate that will lead to to pull button 1 (Fig. 22а) of the lock In the design variant instead of blowing the fuse plug in the vehi- and then open box top 1. When the the socket for additional electrical cle setting block. top is open the inside of the glove equipment, vehicles are equipped 2. Do not clean the spiral of the box is lighted with a lamp if the igni- with the cigarette lighter (Fig. 23b). tion is on. lighter moving part with metal To open main glove box (Fig. To use the cigarette lighter, press the objects, it may cause damage to it. 22b), you should pull up top 1, hold- socket button until it is fixed. In about 3. When replacing you should ing special long tab. 20 seconds, the socket automatical- use cigarette lighters of only ly returns to its initial position, ready types that are recommended for Socket for additional electrical for use. your vehicle, and only of those equipment manufacturers who have the con- ATTENTION! clusion of JSC «AVTOVAZ». In the design variant vehicles 1. Do not press the cigarette 4. Socket for additional electri- are equipped with the socket for lighter for a long time, this can cal equipment (or cigarette lighter additional electrical equipment (Fig. lead to overheating it and burning socket, depending on complete 28 Fig. 23b. Cigarette lighter Fig. 23c. Electrical device (in the design variant) connector in the cigarette lighter socket unit) can be also used to connect the driver and passengers leave only 12-volt electrical appliances the vehicle or the vehicle is with power output not exceeding parked for a long period of time 120 W. Socket overloading can (storage). cause short circuit. Do not use more than one electrical device. If Warning the plug (connector) of the electri- Do not touch the heating spiral cal device is placed in the cigarette of the cigarette lighter, it can lighter socket too loose or tightly, it cause burns or damages to the can lead to poor contact, or to heating spiral. hanging of the plug (connector). Use electrical devices only with appropriate plugs (connectors), which are shown in Figure 23c. 5. Do not leave electrical appli- ances connected to the socket if 29 BONNET

To access to the engine compart- ment pull handle (Fig. 24), lo- cated on the left side of the instru- ment panel, raise the bonnet and through the air space push the pro- tective hook tab to the right (Fig. 25). Raise the bonnet and set bonnet stay 1 (Fig. 26) into the bonnet catch bracket, as shown in the figure. For easy fixation it is not recommended Fig. 24. Bonnet handle Fig. 25. Protective hook tab to raise the bonnet (more than 10 cen- timetres) from the top end of set bonnet stay 1. ATTENTION! Free closing of the bonnet should To prevent damage, do not turn be made from a height of not more on the windshield wiper with the than 25 centimetres between the bonnet opened. edge of the bonnet and the top cross member of the front end carrier. When closing the bonnet, check for reliable operation of the lock: when closing, it should click. Warning The bonnet is a source of high- er risk of injury. Therefore, when closing the bonnet, be extremely careful, especially when children are near it. 30 Fig. 26. Opening the bonnet Fig. 27. Opening the tailgate Fig. 28. Tailgate actuator switch (in the design variant)

TAILGATE The function is not used for «stan- ATTENTION! dard» version. Do not use the key as a handle Tailgate is unlocked by turning the With the tailgate opened and for opening and closing the tail- key in the lock cylinder clockwise external lights switched on the lug- gate, it can cause damage to the (Fig. 27). In the design variant the gage compartment is lighted with the key. tailgate is opened by pressing the lamp. In the design variant luggage button in the remote control compartment is lighted with the lamp console or from the passenger com- if the tailgate is opened and exterior partment with the switch located on lights are off. the left side of the instrument panel (Fig. 28). Warning For the correct work of «button The tailgate is a source of lock» system in «norm» version it is increased risk of injury. There- necessary to press the tailgate open- fore, when closing the bonnet, be ing button for not less than 1-2 sec- extremely careful, especially onds. when children are near it. 31 FUEL TANK PLUG

To access plug 1 (Fig. 29) of the fuel tank, open cap 3, which is locat- ed on the right side of the vehicle. The plug is opened by turning it counterclockwise. The plug should be closed in a clockwise direction until it clicks. Warning When opening the fuel tank plug there may be splashes of Fig. 29. Fuel tank plug fuel, open slowly! Flexible string 2 eliminates the industrial rubber article with pet- possibility of losing the plug when rol. refuelling the vehicle and allows one Do not refuel when the fuelling to close the cap, if the plug is not valve is automatically off or the turned up into the tank filler. To avoid petrol appears in the fuel tank dirt entering the fuel tank, after turn- filler if refuelling with the valve ing off place the plug so that its that is not equipped with shut- inside does not touch dirty surface of down system. Failure to comply the vehicle body. with this instruction may result in Warning pouring surplus petrol from the fuel tank when the vehicle is Petrol and its vapours are poi- parked. sonous and flammable! Observe safety precautions and fire safety regulations! Avoid skin and cloth contact with petrol. Do not inhale petrol vapours. When refuelling, avoid contact of paint coating and 32 II. INSTRUMENTS In case you ignore our recom- When restarting the engine – heating AND CONTROLS mendation on sound signal cor- function is restored without pressing rect activation the manufacture is the switch button. INSTRUMENT PANEL not responsible for further condi- Check light indicator on the switch The instrument panel is shown in tion and operating characteris- button will light orange during opera- Figures 30a and 30b; it depends on tics of your car air bag module. tion of the heater. In the design variant heating of the design version of your vehicle. 4 – instrument cluster (See the 1 – light engineering control rear window and exterior mirrors is section «Instrument cluster»). module (see the section «Light engi- switched at the same time. neering control module and head- 5 – wiper switch (See the section In the design variant rear win- light adjuster»). «Wiper switch»). dow heater and electric mirrors' 2 – light alarm switch (See the 6 – ignition starter switch (See heaters are activated only when the section «Light alarm switch»). the section «Ignition starter switch»). engine is running. 3 – driver’s air bag module 7 – hazard switch. To turn on includes an intergrated system light alarm, press the switch button; ATTENTION! with castenets-like horn. to turn off it, repress the switch but- 1. To avoid discharging the bat- ATTENTION! ton. When activating light alarm all tery, do not switch on rear window turn indicators work. Light alarm heating for a longer period of time 1. Sound signal is activated by than is necessary. pressing the module top cover, in warns that at the moment the vehicle 2. When cleaning the inner sur- the zone marked by dash-and-dot is a danger to other road users. Light line (Fig. 30a and 30b). alarm operates in all positions of the face of the rear window do not 2. It is forbidden to activate key in the ignition starter switch. use sharp objects, as well as sound signal by stroke the mod- 8 – rear window heating switch. cleaning agents containing abra- ule cover! Rear window heater only works when sives as they can damage con- ductors of the window. 3. To avoid the air bag module the key is inserted into the ignition cover breaking do not activate the starter switch to position I. To switch 9 – ventilation and heating sys- sound signal lower than recom- on heating press the switch button, mended zone, marked by dash- tem control unit or climate system and-dot line (Fig. 30a and 30b). to switch off heating, repress the control unit (in the design variant) The correct operation with switch button. (See the section «Ventilation and sound signal will allow to prolong If turning the key in the ignition heating system control in passenger air bag module life and to keep its starter switch to position 0 with the compartment»). salable condition. heater on – heating function is off. 10 – side glove box lid.

3 Р.Э.-21920, англ. яз. 33 Fig. 30а. Instruments and controls (in the design variant) 34 Fig. 30b. Instruments and controls (in the design variant)

3* 35 11 – dipped beam adjuster (See ATTENTION! After engine start the electronic sta- the section «Light engineering con- For brake pads not to be bility control function (ESC) and anti- trol module and headlight adjuster»). adhered and frozen to drums skidding function are activated auto- 12 – boot lid latch actuator (especially in spring and autumn), matically. To disable these functions, switch (in the design variant) (See do not park the vehicle for a long press and hold the switch button for the section «Tailgate»). time with the parking brake on. 2-3 seconds. In this case, in the 13 – bonnet lock actuator lever instrument cluster the LED ESC OFF Warning (See the section «Bonnet»). will flash on (See the section «Instrument cluster»). The functions 14 – clutch pedal (in the design If in extraordinary circum- can be turned off only when vehicle with manual transmission). stances, you have to use the speed is below 50 km / h. To turn on 15 – steering column tilt parking brake while driving (for example, in case of failure of the functions just quickly press the adjuster lever (in the design vari- service braking system), do not switch button. ant) (See the section «Steering tighten it too much and constant- wheel adjustment»). ly hold down the button on the 16 – brake pedal. lever. Otherwise, rear wheels may 17 – accelerator pedal. be locked and the vehicle may be 18 – gear-change lever. In addi- skidded. tion to manual transmission in the design variant automatic transmis- 20 – front seat heating switch sion is installed on the vehicle. For (in the design variant) (See the more information on gear-change section «Seats»). 21 – cigarette lighter or socket lever control, refer to sections for additional electrical equip- «Gear-change lever in manual trans- ment (in the design variant) (See mission» and «Gear-change lever in the section «Socket for additional automatic transmission.» electrical equipment»). 19 – parking brake lever. When 22 – windshield electrical heat- moving the lever up the rear brake ing switch (in the design variant) pads are actuated. To return the (See the section «Ventilation and lever to its initial position, press the heating modes»). button on the end of the handle, 23 – electronic stability control holding it, pull down the lever. switch (in the design variant). 36 INSTRUMENT CLUSTER

1 – tachometer. It indicates the speed of the engine shaft (x1000 min-1). If the tachometer needle is in the area of red scale it warns of in- creased engine speed. To prevent damage to the engine its maximum speed is limited with electronic en- gine control system programme. If exceeding the speed of approxi- mately 6200 min-1 fuel supply will be limited. In this case, possible engine conks and traffic blows are not a fail- ure. By reducing the speed the fuel supply will be resumed. Also, do not run the engine when starting and driving with engine shaft speed of below 800 min-1. Fig. 31. Instrument cluster ATTENTION! Do not run the engine in dan- gerous mode – with the engine ly – the controller has back-up 3 – left turn indicator LED. It shaft speed of above 6200 min-1 modes, which allow the engine to blinks green when switching on left and below 800 min-1. operate in conditions close to nor- turn indicators. 2 – «Engine» LED. It lights orange mal. 4 – oil pressure warning switch. It lights red when switching on the when the ignition is on and after ATTENTION! engine start it goes out. ignition and after engine start it goes With the engine running lighting However, the cause of the fault out. of the LED does not mean that the must be corrected at any certified With the engine running lighting engine must be stopped immediate- SSNE as quickly as possible. LED and intermittent horn of the 37 buzzer indicate the lack of pressure onds to confirm good condition of With the engine running, in the engine lubrication system. the alarm. If the alarm does not light switching of the LED is duplicated or it is turned on in the intermittent with short intermittent horn of the ATTENTION! duty, then you should check the cir- buzzer. If the oil pressure warning cuit. Warning switch lamp burns with the engine Do not operate the vehicle with a running, stop as soon as possible faulty alarm. If coolant operating Do not operate the vehicle if observing the traffic rules, shut temperature exceeds (above 115 0С) the LED is constantly lighting. In off the engine and contact any it lights red constantly, and the inter- this case, you should contact any certified SSNE for troubleshoot- certified SSNE. ing, because insufficient pres- mittent horn of the buzzer is given for sure in the lubrication system will a short time. Do not run the engine 9 – right turn indicator LED. It lead to engine failure. in overheat condition. blinks green when the right turn indi- cators are switched on. 5 – anti-lock brake system LED. ATTENTION! 10 – battery discharge LED. It It lights orange when switching on Do not operate the vehicle with lights red when switching on the igni- the ignition and it goes out at the overheated engine. The vehicle tion and after engine start it goes end of ABS self-test mode (about must be delivered to the certified 3 seconds). out. SSNE to troubleshoot the cause With the engine running light ATTENTION! of engine overheating. emission of the LED and intermittent In all other cases, lighting of 8 – «Failure of brake» LED. It horn of the buzzer mean abnormal the LED means a fault, repair of lights red when switching on the igni- operation of power supply system which should be done only at any tion for about 2 seconds and it goes and indicate a fault in the battery certified SSNE. out at the end of ABS self-test mode charging system, low tension or break of alternator drive belt or fault 6 – immobilizer LED. It lights (in the design variant). The LED in the alternator. orange and displays the status of the flashing mode indicates that the park- immobilizer and protection mode of ing brake is switched on. The LED ATTENTION! lighting constantly indicates low brake the vehicle (see the section «Im- In this case, you should con- mobilizer»). fluid level in the hydraulic brake actu- tact any certified SSNE. 7 – coolant temperature alarm. ation tank or failure of ABS Electronic When switching on the ignition it Brake-force Distribution (in this case, 11 – speedometer. It indicates automatically lights red for 2 sec- it is turned on together with ABS LED). the vehicle speed (km/h). 38 12 – ESC (in the design variant). 15 – rear fog light indicator. It ton on the front panel of the instru- Electronic Stability Program LED lights orange when switching on the ment cluster or press no buttons on (ESP). It lights orange when switch- rear fog lights. the understeering switch for more ing on the ignition for about 2 sec- 16 – dipped beam indicator. It than 5 seconds. lights green when switching on the onds and it goes out at the end of ATTENTION! ABS- ESC self-test mode. When driv- dipped beam. Do not rotate the button! ing it lights and flashes with a fre- 17 – front fog light indicator (in quency of 2-3 times per second in the design variant). It lights green 19 – LCD display (See the sec- the case of activating the electronic when switching on the front fog tion «LCD display»). stability control and antiskid func- lights. 20 – door alarm. It lights red if tions. The LED ESC OFF lights 18 – trip counter switch button, the driver's door or (in the design orange after forced shutdown of reset button for the trip mileage variant) any passenger's door of the electronic stability control and anti- recorder and time correction vehicle is open. 21 – fuel reserve alarm. It lights skid functions and goes out after mode switch button. orange if necessary refuelling to switching on the functions. Trip counters are switched over by single short push of the button. To avoid engine conks. ATTENTION! reset the trip counter press and hold Fuel reserve alarm lights with two or less illuminated segments of the In all other cases, lighting of the button for more than 2 seconds in daily mileage display mode. fuel level indicator on the LCD dis- the LED means a fault, repair of play. Switching of the light indicator which should be done only at any is accompanied with an intermittent Clock setting certified SSNE. horn of the buzzer. 13 – O/D OFF (in the design Simultaneous flashing of the To change to clock setting mode alarm and «empty» shapes of fuel variant). «Over Drive» LED prohibits press and hold for more than 2 sec- gauge segments indicates a fault in shifting to higher gear in the auto- onds the button on the front panel of the fuel level sensor circuit. matic transmission (see the section the instrument cluster with total 22 – tire pressure emergency «Features of driving with automatic mileage displaying. Time correction descent alarm (in the design vari- transmission»). It lights orange. is performed with buttons 5 (minute ant) It lights orange if tire pressure 14 – main beam indicator. It correction) and 6 (hour correction) descends. lights blue when switching on the on the right understeering switch. To 23 – electric power steering main beam. exit correction mode press the but- alarm. It lights orange when switch- 39 ing on the ignition and after engine indicator does not light up in the self- puter without displaying the outside start it goes out. test mode; this indicates a malfunc- temperature: tion of the system, in this case, you – OverDrive indicator, ABS, trans- ATTENTION! should contact any certified SSNE as mission fault, tire fault, unclosed In all other cases, lighting of soon as possible. doors. the alarm means a fault, repair of For the design variant of the which should be done only at any ATTENTION! instrument cluster with the trip com- certified SSNE. In all other cases, lighting of puter and displaying the outside the indicator means a fault, repair temperature: 24 – safety belt reminder (in the of which should be done only at – main beam, dipped beam, ESC, design variant). any certified SSNE. ESC OFF. It lights red when switching on the If in the self-test mode you press ignition if seat belts are not fastened. 27 – hazard indicator. It blinks the trip counter switch button, then When driving at a speed of more than red when pressing the hazard switch LCD will display the number of instru- 10 km/h switching of the light indica- button. ment cluster software on the top line tor is immediately duplicated with an The instrument cluster has a of the LCD and the number of instru- intermittent horn of the buzzer; at a self-test mode. To activate the self- ment cluster on the middle line. Self- speed of up to 10 km/h the horn will test mode, press the trip counter test mode will stop in 25 seconds sound after 60 seconds of non-stop switch button, then switch on the after it starts, or when the signal of speed or revolutions of the engine driving. ignition, holding the button (not shaft appears. Warning starting the engine). After switching on the ignition the When driving be sure to fasten needles of indicating instruments your seat belt and do not carry (tachometer and speedometer) will unbelted passengers! move from zero to maximum (4 times), 25 – transmission malfunction while on the liquid crystal display indicator (in the design variant). (LCD) all segments will light and all 26 – airbag indicator. It lights alarms and LEDs will be switched on, orange when switching on the igni- controlled with the microcontroller of tion and it goes out at the end of ABS the instrument cluster. self-test mode (about 3 seconds). For the design variant of the When switching on the ignition the instrument cluster with the trip com- 40 LIQUID CRYSTAL DISPLAY (LCD) LCD indications for «Standard» and «Norm»

Numeric display: LCD indication LCD display indication mode – top line displays current time, or minimal maximal (in the design variant) gear- change prompting display mode, as Distance covered, km well as automatic transmission dis- play mode; Daily run, km – middle line displays total miles Current time, hours: minutes or daily miles; – bottom line (in the design vari- Car-system voltage, V ant) displays the outside tempera- ture or functions of the trip computer. Current fuel rate, l/100 km Graphic display shows the fuel level. If the fuel reserve alarm lights Average fuel rate, l/100 km and the buzzer gives a horn, then refuel the vehicle to engine conks. Residual fuel distance, km ATTENTION! Automatic transmission operation Never allow running out! This Fuel level can lead to emergency situation on the road because of unexpect- Coolant fluid temperature, 0С ed for other road users stop of your vehicle. LCD indications for «Luxe»

LCD indication LCD display indication mode minimal maximal

Distance covered, km

Daily run, km

Middle speed, km/h

41 LCD indications for «Luxe» (cont.)

LCD indication LCD display indication mode minimal maximal

Current time, hours: minutes

Travelling time, hours: minutes

Gear-change prompt

Car-system voltage, V

Current fuel rate, l/100 km

Average fuel rate, l/100 km

Fuel used, l

Gear-change prompt tone on/off

Residual fuel distance, km

Automatic transmission operation

Fuel level

Outside temperature, 0С

Coolant fluid temperature, 0С

42 GEARSHIFT PROMPTER LCD reading in «norm» version FUNCTION LCD reading LCD reading mode Gearshift prompter (GP) – func- minimal maximal tion that determines the necessity to change gear for higher or lower gear Gearshift prompt (for guarantee the engine most economy mode) and informs the Recommended gear shift indication driver of it. This function can be used for cars Signal reading Recommendation with manual gearbox (MGB) only. 1–6 It is recommended to drive-down Sound gearshift prompter 0 No recommendation, the function is switched on switch on/off 8–14 It is recommended to drive up 7, 15 The function is switched off, no indication The sound signal on/off can be done by key «Reset» or «ОК» (in design variant) at the under-steer- ing switch. The GP sound signal sta- tus is indicated at the instrument cluster LCD in the on-board comput- er row. Information displayed at LCD: –«GSI 0» – GP sound is switched off; –«GSI I» – GP sound is switched on.

Fig. 32. GP function in the instrument cluster LCD

43 TRIP COMPUTER CONTROL (in the design variant)

Trip computer control buttons are located on the wiper lever and shown in Figure 33. Button 1 – reset of trip computer readings, gear-change prompt tone on/off. Button 2 (when pressing upper arrow key) – switching the selection mode of trip computer's functions Fig. 33. Trip computer Fig. 34. Light engineering «in a loop» forward, setting minutes control buttons control module in the mode of time setting. (in the design variant) and dipped beam adjuster Button 2 (when pressing lower arrow key) – switching the selection mode of trip computer's functions LIGHTING CONTROL MODULE – in the design variant in this «in a loop» backward, setting hours AND DIPPED BEAM ADJUSTER position the tail lights and dipped in the mode of time setting. beam are switched on and off auto- Exterior light switch (ELS) 1 matically depending on the exterior (Fig. 34) has three fixed positions (or lighting condition. Light sensor is four – in the design variant): combined with rain sensor and it is O – with the engine off the exterior located on the windshield behind the lights are off, with the engine on the rear-view mirror. daytime running lights (DRL) are on; The automatic control system of – tail lights combined with exterior lighting (lighting system) DRL are on; switches on and off the tail lights and – tail lights are on as well as dipped headlights depending on the dipped or main beam depending on level of exterior lighting. For exam- the position of the light alarm switch ple, in twilight, as well as at the (see the section «Light alarm entrance to the tunnel or garage. switch»). The lighting system only works 44 when the ignition is on. Remember If necessary, adjust dipped beam with the automatic control system that when the lighting system works by turning the handle to align the of exterior lighting on (exterior the main beam is not turned on for a handle mark with one of the marks light switch is in position – in long time. To turn on the main beam on the scale corresponding to the the design variant) the exterior for a long time, you must first change vehicle load state. light switch must be changed to When setting the electrical position or . the ELS switch to position «Dipped adjuster handle to position outside of beam». the mark-up of the scale, there is Warning possible asynchronous passing of dipped beam of the left and right The moment of switching the headlight units, which is not a defect. exterior lighting with the auto- matic control system cannot meet Warning safety requirements. Therefore, Correct adjustment of the the use of this system does not beam angle reduces dazzling of relieve the driver of responsibility drivers of oncoming traffic. for observing safety require- To avoid poor lighting of road- way do not set the handle to end ments and traffic rules. position counterclockwise. Dipped beam adjuster switch. Rear fog light switch. To switch Before operating the vehicle with the on the fog lights, press switch button dipped beam check for correct posi- 2 with the dipped beam on. Re- tion of handle 3 of dipped beam pressing of the button turns off the electrical adjuster depending on the fog lights. vehicle load state: Front fog light switch (in the 0 – driver or driver + front passen- design variant). To switch on the ger; fog lights, press switch button 4 with the tail lights on. Re-pressing of the 1 – driver + luggage in the lug- button turns off the fog lights. gage compartment; 2 – driver + 4 passengers; Warning 3 – driver + 4 passengers + lug- When driving in conditions gage in the luggage compartment. requiring fog lights or fog lamps, 45 LIGHT ALARM SWITCH

I (Fig. 35) – neutral position. Dipped beam is on if headlight beam is switched on with the exterior light switch. II – left turn indicators are on. Non-fixed position. III – left turn indicators are on. Fixed position. IV – right turn indicators are on. Non-fixed position. Fig. 35. Light alarm switch lever Fig. 36. Wiper lever V – right turn indicators are on. Fixed position. VI – pull, light signalling. Main beam is on, regardless of the posi- WIPER SWITCH VI – pull, windshield washer is tion of the exterior light switch. Non- on. Non-fixed position. fixed position. Windshield wipers are turned on VII – push, rear window wiper is VII – push, main beam is on, if by changing the key in the ignition on. Fixed position. headlight beam is switched on with starter switch to position I. VIII – push, rear window wiper the exterior light switch. Fixed posi- I (Fig. 36) – neutral position. and washer are on. Non-fixed posi- tion. Window wipers and washers are off. tion. II – intermittent operation of In the intermittent operation the the windshield wiper is on. Non- wiper moves its blades once per sev- fixed position. eral seconds at a constant interval, III – intermittent operation of regardless of whether there are the windshield wiper is on. Fixed drops on the windshield. position. In the design variant the vehicle IV – low speed of the windshield is equipped with automatic control wiper is on. Fixed position. system of the windshield wiper V – high speed of the wind- (cleaning system), which allows one shield wiper is on. Fixed position. to switch on and off the wiper auto- 46 matically. It depends on whether rain sensor sensitivity switch to posi- ATTENTION! there are raindrops on the wind- tion 0 (extreme left position). In this 1. To prevent damage, do not shield. mode the manual control of wiper turn on the windshield wiper with The cleaning system only works lever assembly to appropriate posi- the bonnet opened. when the ignition is on. tion is carried out. 2. Do not switch on the wiper To enable the cleaning system When switching off the ignition the when the windshield is dry. This you should change rain sensor sen- wiper also stops. Blades are set to may result in scratches on the sitivity switch 1 (see Fig. 37), located park position. window or damage the wiper behind the rear-view mirror from If the wiper had worked in one blades. Before switching on the position 0 to any position from 1 to mode at a constant speed of clean- wipers in dry window always use 4*, and the wiper lever to position III ing until the ignition was off, after the window washer. (intermittent operation). At the same switching off the ignition the wiper 3. If wiper blades are frozen to the wiper blades make one move, blades can stop in the non-park the window, before switching on and then they will be turned on or off position.To switch the brushes to the the wiper you should first switch depending on the number of rain- on windshield heating (see the drops on the windshield. park position you should change the wiper lever to position I or III no later section «Ventilation and heating If the cleaning system has already modes»). Attempt to switch on been enabled, when switching on the than in 30 seconds after switching off the ignition. the wipers with blades frozen to ignition the wiper blades also make the window can damage rubber To remove smudges, deposits of one move and the cleaning system tape of blades. road salt or pavement elements, comes into operation. 4. Do not clean the wiper periodically clean the wiper blades When detecting a fault the clean- blades with petrol or solvent, it ing system will be automatically and windows with washer fluid. Fat, will damage them. switched to «manual» wiper control. wax, insects etc. on the windshield To disable the automatic cleaning can lead to hunting of the wipers and system and switch to the «manual» appearance of smudges on the win- wiper control you should change the dow. If smudges are not removed after applying the washer fluid, clean the outside of the window and wiper * It is provided 4-step adjustment of rain blades with a soft cloth using special sensor sensitivity. The highest sensitivity for detergents. After cleaning, wash the setting the switch in a clockwise direction to the window and wiper blades with water. extreme right position 4. 47 RAIN AND LIGHT SENSORS and then they will be switched on or off depending on the number of rain- drops on the windshield. In the design variant vehicles If the cleaning system has already are equipped with a combined rain been enabled, when switching on the and light sensor, which is located on ignition the wiper blades also make the windshield behind the rear view one move and the cleaning system mirror (Fig. 37). comes into operation. ATTENTION! When detecting a fault the clean- ing system will be automatically For correct operation of auto- switched to «manual» wiper control. matic control systems of wind- Fig. 37. Rain and light sensor In order to switch the automatic shield wiper and exterior lighting, cleaning system off and to enter the you should always clean the wind- wiper «manual» mode it is necessary shield in the area of «Rain and to remove the rain sensor switch in light sensor» and check the con- the position 0 (extreme left position). dition of wiper blades. windshield wiper only in wet In this mode you can the manually weather due to the sensitivity of put the wiper switch lever in the cor- Windshield wiper automatic the system to particles of dirt, responded position. control fog, snow, ice-melting salt, which At the ignition switched off the can cause system actuation if wiper stops working, the blades can In the design variant the vehicle windows are dry. is equipped with automatic control stop not in the park position. system of the windshield wiper The cleaning system only works In order to place the blades into (cleaning system), which allows one when the ignition is on. the park position it is necessary to to switch on and off the wiper auto- To enable the cleaning system switch the ignition on and to move matically. It depends on whether you should change rain sensor sen- the wiper switch lever in position I. there are raindrops on the wind- sitivity switch 1 (see Fig. 36), located shield. behind the rear-view mirror from position 0 to any position from 1 to * It is provided 4-step adjustment of ATTENTION! 4*, and the wiper lever to position III rain sensor sensitivity. The highest sensi- It is recommended to use the (intermittent operation). At the same tivity for setting the switch in a clockwise automatic control system of the the wiper blades make one move, direction to the extreme right position 4. 48 In case you stay the wiper switch wipers in dry window always use lever not in the position I and switch the window washer. the ignition off for more than 1 3. If wiper blades are frozen to minute, then after switching the igni- the window, before switching on tion on the wiper doesn’t work till the the wiper you should first switch lever position is changed or till wash- on windshield heating (in the er is switched on. design variant see the section To remove stains, road salt coat or «Ventilation and heating modes») road surface elements you are to and make sure that the wiper clean the blades with the washer blades have thawed. Attempt to switch on the wipers tank fluid periodically. with blades frozen to the window The fat, wax, insects and etc. can lead both to damage to rub- availability in the windshield can lead ber tape of blades, and to early to the wipers hunting and dirty stains wear of the wiper drive. appearance at the windshield. 4. Do not clean the wiper In case stains can’t be removed blades with petrol or solvent, it with the washer fluid you are to clean will damage them. the windshield exterior surface and blades with the soft textile and spe- cial cleaning agent. After cleaning wash the wind- shield and blades with water. ATTENTION! 1. To prevent damage, do not use the windshield wiper with the bonnet opened. 2. Do not switch on the wiper when the windshield is dry. This may result in scratches on the window or damage the wiper blades. Before switching on the

4 Р.Э.-21920, англ. яз. 49 IGNITION STARTER SWITCH If the ignition is off and the key is left in the ignition switch, then when opening the driver's door the buzzer 0 (Fig. 38) – off. Fixed position. gives an intermittent horn, warning of The key is not removed. leaving the key in the ignition switch. When the key is removed the If the ignition is off and the key is mechanism of locking mechanical removed from the ignition switch, but anti-theft device is activated. For the tail lights are left on, then when steering shaft to be completely opening the driver's door the buzzer locked, turn the steering wheel to the gives two intermittent horns to warn right or to the left until it clicks. about switched exterior lighting. To turn off the mechanical anti- Fig. 38. Ignition starter switch theft device, insert the key into the ignition switch and turning the steer- ing wheel slightly to the right and to the left, turn the key to position I. ed changing of the key from posi- I – ignition. Fixed position. The tion I «Ignition» to position II key is not removed. «Starter». II – starter. Non-fixed position. For repeated changing of the Automatic return of the key to posi- key from position I «Ignition» to tion I. The key is not removed. position II «Starter», you must If the engine does not start with first change the key to position 0 the first start attempt, turn the key «Off», and then try again. from position I to position 0 and in Warning about 40 seconds try to start again. It is expressly prohibited to ATTENTION! switch off the ignition and remove Do not hold the key in position the key from the ignition switch II for more than 10 seconds. while driving – it leads to heavy The ignition starter switch in- increase in efforts to press the cludes starter restarting lock-out brake pedal and steering block- mechanism that prevents repeat- ing. 50 GEAR-CHANGE LEVER While driving, do not keep your IN MANUAL TRANSMISSION arm on the gear-change lever, this may result in damage and premature wear of gear-change Chart for gear-change lever posi- parts (make no effort to the gear- tions in manual transmission is change lever). applied on the top of its handle (Fig. 39). 1, 2, 3, 4, 5 – first, second, third, fourth and fifth gears. R – reverse gear. Neutral position – between third Fig. 39. Gear-change lever and fourth gear. in manual transmission Before starting the engine, make sure the gear-change lever is in the neutral position. For backing run stop the vehicle, cult to change gears and it may press the clutch pedal, after a pause lead to increased wear of syn- (not less than 3 seconds), pull the chronizers. gear-change lever from the neutral Actuate forward gears according position to the right until it stops, and to the scheme on the handle, and move it back in the direction of the make no efforts to gear-change vehicle travel. lever. If you fail to switch on the gear, re- turn the lever to neutral position, re- ATTENTION! lease the clutch pedal, then depress Actuate the reverse gear only the clutch again and try to switch on when the vehicle is stopped. the gear. Actuating reverse gear is car- Call attention to full declutching ried out only with the vehicle when changing gears, for which the stopped and no sooner than in clutch pedal must be depressed until three seconds after depressing it stops. Otherwise, it may be diffi- the clutch pedal. 4* 51 GEAR-CHANGE LEVER IN AUTO- MATIC TRANSMISSION (in the design variant)

Switching automatic transmission (AT) modes is carried out by moving the gear-change lever in the longitu- dinal direction (Fig. 40a), depending on the desired direction of travel. To unlock the lever from positions R, N, D, 2 press lock button 1 on the gear- Fig. 40a. Gear-change lever Fig. 40b. Pedals with automatic change lever handle. To unlock the in automatic transmission transmission lever from positions P switch the ignition on, press the brake pedal and press button 1 on the lever han- dle. When changing the lever from Lever position: stops while driving, but without using position N to position D and back, as Р (parking) – used to avoid rolling the parking brake. of the vehicle in the parking or when well as from position 1 to position 2, ATTENTION! the engine is started. At the same the and then, to position D you may not If driving you accidentally press lock button 1. The selected parking brake can be switched on or off. switched the gear-change lever mode is displayed on the LCD in the to position N, allow the engine to instrument cluster. Indication of R (reverse) – reverse gear. Can slow speed before activating gear-change lever position shown in only be activated when the vehicle is mode D (it is activated without the decorative moulding next to the fully stopped, with the engine idling. pressing lock button 1, see Fig. lever, is presented as a reference and N (neutral gear) – used for start- 40a) and then to pick up speed. is not used when driving. ing the engine in the parking at the Figure 40b shows accelerator same time with the working or park- D (driving) – used for starting and pedal 2 and brake pedal 1. When in- ing brake on. In addition, this gear- driving in automatic gear-change stalling the automatic transmission change lever position can be used to mode. In this mode, to give desired the clutch pedal is absent. start the engine when it suddenly speed of the vehicle, for example, 52 when overtaking, you need to press VENTILATION AND HEATING the accelerator pedal. This will SYSTEM CONTROL increase engine speed. If the press is intense enough, the gearbox will be automatically switched to lower gear In the design the vehicle can be to be selected depending on the cur- equipped either with heating and rent speed of the vehicle and press ventilation system or with climate intensity. control system. 2 (second gear) – used when 1 – fan switch handle. upgrading and for effective engine 2 – heater switch handle. braking. 3 – recirculation shutter lever 1 (low gear) – used when climbing handle. Fig. 41. Ventilation and heating at low speed, as well as when driving 4 – air flow distributor handle. system control unit in heavy traffic conditions (sand, Heating and ventilation system is deep dirt, etc.). In addition, this gear designed to create interior comfort provides the most effective downhill temperature, the value of which is braking of the engine. regulated with the ventilation and Warning O/D – «Overdrive» button. Used heating system control unit (Fig. 41). Proper use of controls for heat- to limit high gear in the automatic However, it cannot provide the interi- ing and ventilation system in gear-change mode. or air temperature lower than of accordance with the recommen- For more information on driving outer air. dations can improve safety of with automatic transmission, see The air box of the heating and traffic by quickly cleaning of win- «Features of driving with automatic ventilation system is equipped with dows of snow and ice, as well as transmission». the air filter that is designed to clean defogging. air entering the passenger compart- Remember – quick cleaning of ment, from dust, pollen, smoke, and windows and the most efficient bugs. Replacing the filter and clean- interior heating are possible only ing the drain hole in the front panel when the engine is fully warmed are carried out at any certified up! SSNEs every 15,000 km (for driving Handle 1 serves to regulate air along the dusty roads – if neces- supply into the passenger compart- sary). ment. Handle position «1» – the mini- 53 mum speed of air supply in the pas- nal air supply into the passenger through the windshield demister senger compartment, position «4» – compartment is locked (recirculation nozzle and the side window demister the maximum speed. When the mode). This mode can be used when nozzle. switch is in position «0» the fan does driving through a tunnel in summer If handle 4 is set with its mark in not work; fresh air is not supplied to or when driving in «traffic jam» to front of symbol , the air enters the passenger compartment. avoid supplying air to the passenger the upper part of the passenger compartment saturated with exhaust compartment through side and cen- ATTENTION! gases, as well as to quickly warm the tral nozzles to blow the driver and When driving with closed win- air in the passenger compartment. passengers. dows, it is recommended to Handle 4 can be set to any inter- switch on the fan of heating and Warning mediate position (between the sym- ventilation system to create Recirculation mode can be bols described above) for more pre- excessive pressure in the pas- enabled only for a short time, as cise adjusting of distribution of air senger compartment (to avoid fresh air is not supplied to the flow. ingress of dust and dirt through passenger compartment, and Air supply through side nozzles 1 body leaks), as well as to avoid windows can weep. (Fig. 42) is adjusted by changing the misting. position of deflectors until they Control unit handle 4 is used for close. To open the desired nozzle, Lever handle 2 in the red sector distributing air flow. press the special hole in the deflec- area adjusts the position of the If handle 4 is set with its white tor. By rotating the deflector you can heater control flap so that the interior mark in front of symbol , the air adjust the direction of air flow. air temperature can correspond to enters the lower part of the passen- By shutter operating levers 2 you the desired value of the handle. The ger compartment, foot area of the can adjust the air flow rate through closer the handle mark to the end of driver and passengers. central nozzles 4 by changing the the red sector, the warmer air is sup- If handle 4 is set with its mark in position of the shutters down to their plied to the passenger compart- front of symbol , the air enters the full closure. By levers 3 of central ment. lower part of the passenger com- nozzle directional vanes you can Recirculation shutter lever partment, foot area of the driver and change the direction of air flow. handle 3 is used to supply fresh air passengers, as well as through the into the passenger compartment, windshield demister nozzle and the while it is in the extreme left position side window demister nozzle. , and when handle 3 is in the If handle 4 is set with its mark in extreme right position exter- front of symbol , the air enters 54 Fig. 42. The direction of air flow out of deflectors and ducts

55 VENTILATION AND HEATING Prevention of weeping Cleaning the windows of snow MODES and ice When air moisture is high, for Interior ventilation example, during periods of heavy For quick cleaning of the wind- rain, car windows can weep. To pre- shield and front door windows of For interior ventilation (supply of vent weeping of the windshield and snow and ice it is recommended to unheated air) you must set the han- front door windows, do the following: do the following: dles of ventilation and heating sys- – handle 2 (See Fig. 41) should – sweep away snow and ice from tem control unit to the following posi- be turned counterclockwise to the tions: the windows and air intake in front of extreme left position until it stops – handle 2 (See Fig. 41) should the windshield with soft brush (it is be turned clockwise to the extreme (red dot on the control unit), and in not recommended to use rigid right position until it stops (blue dot the design variant (See Fig. 43) it scrapers to clean windows of ice in on the control unit), and in the should be turned clockwise to the order to avoid scratching windows); design variant (See Fig. 43) it extreme right position of the red – handle 2 (See Fig. 41) should should be turned counterclockwise area; be turned counterclockwise to the to the extreme left position of the – handle 4 should be set to posi- extreme left position until it stops blue area; tion ; (red dot on the control unit), and in – handle 4 should be set accord- – nozzles 1 (See Fig. 42) should the design variant (See Fig. 43) it ing to the desired direction of air be directed to appropriate side win- should be turned clockwise to the flow; dows to the area of maximal weep- – nozzles 1 and 4 (see Fig. 42) extreme right position of the red ing; should be adjusted depending on area; – fan switch handle 1 (See the desired direction and power of air – handle 4 (See Fig. 41) should flows; at that nozzles 1 are regulated Fig. 41) should be set to the speed depending on the degree of weeping. be set to position ; with deflectors of the nozzles (for – nozzles 1 (See Fig. 42) should opening press the special recess), ATTENTION! be directed to appropriate side win- and nozzles 4 are adjusted with levers 2 and 3; When washing the vehicle do dows to the area of maximal icing; – heater fan switch lever 1 (See not turn on the climate system fan – heater fan switch lever 1 (See Fig. 41) should be set to the desired that corresponds to position «0» Fig. 41) should be set to the maximal air flow rate. of handle 1. flow rate of air. 56 Quick heating of passenger has reached the desired level, it is compartment recommended to do the following: – by rotating handle 2 set the For quick heating of passenger desired temperature; compartment it is recommended to – handle 4 should be set to posi- set the ventilation and heating sys- tion ; tem control unit to the following posi- tions: – by rotating fan switch handle 1 – handle 2 (See Fig. 41 should be select the desired rate of hot air. turned counterclockwise to the ATTENTION! extreme left position until it stops To ensure good operation of (red dot on the control unit), and in the design variant (See Fig. 43) it heating and ventilation system, should be turned clockwise to the regularly clear openings for fresh extreme right position of the red air intake of snow, ice and leaves, Fig. 43. Climatic system control unit area; located in front of the windshield. (in the design variant) – handle 4 (See Fig. 41) should Avoid increasing air moisture be set to position ; because of evaporation of water – fan switch handle 1 should be and snow from carpets and rub- Climatic system control set to position «3»; ber mats and clean them in a features – handle 3 should be set to the timely manner. Keep windows extreme right position (recirculation clean, because more air moisture In the design variant the vehicle mode) for short heating. If in this gather on dirty windows, and they is equipped with the climatic system case windows weep or frost up, han- thaw longer. (Fig. 43). The climatic system has Do not pollute vents of used air dle 3 should be set to the left posi- conditioning mode, automatic mode tion (external air supply). In the in the side upholstery of the lug- gage compartment. for maintaining desired interior air design variant (See Fig. 43) the temperature and automatic mode for recirculation mode is switched on When the heating system oper- cleaning the windshield. and off with button 3. ates at full capacity, it is not rec- ommended to open the windows. Despite the fact that the appear- Providing comfort interior Trouble-free operation of heat- ance and location of the climatic sys- temperature ing and ventilation system control tem controls are different from venti- is provided with strict adherence lation and heating system controls Once the windows have been to the above sequence of switch- (see Fig. 41), logic and control algo- cleared, and the interior temperature ing its handles. rithms described above for ventila- 57 tion and heating system, are also ing all the operation of the air condi- In the position of handle 4 valid for the climatic system. In addi- tioner. at least one of nozzles 1 and 4 tion, the climatic system can provide 4. Set handle 4 with its mark to (see Fig. 42) must be opened, cooling the air supplied to the vehicle position or any other desired po- otherwise the air cooling heat interior, automatic mode for main- sition. taining desired interior air tempera- 5. Handle 2 should be set to the exchanger (evaporator) can ice ture and automatic mode for clean- position corresponding to the blue up and block air flow. ing the windshield. area of the scale, depending on the When the air conditioner works 1 – climatic system fan switch desired degree of air cooling. The defogging is carried out more effec- handle; temperature will be automatically tively, especially when outside air 2 – climatic system tempera- maintained within the climatic sys- moisture is high. Therefore, when ture adjuster handle; tem performance and the specified 3 – recirculation control button; tolerance. turning on the automatic windshield 4 – air flow distributor handle; The air conditioner operation may cleaning with button 5 with symbol 5 – automatic windshield clean- cause moisture under the engine the air conditioner will automati- ing on/off button; compartment. This is normal as the cally switched on. 6 – air conditioning system air conditioning system of the vehicle on/off button. removes condensed moisture on the Interior air recirculation evaporator out of the passenger features Air conditioning mode compartment. To switch off the cooling function To speed up interior air cooling it To activate the cooling function (air conditioning function) press A/C is recommended to switch on the (air conditioning function) with the switch button 6 once more, the recirculation mode for a short time, windows closed: light indicator will go out. for this press button 3 with symbol 1. Switch the ignition (start the en- ; it stops supplying outside air, gine). ATTENTION! 2. Switch on the fan setting han- Air conditioner operates only and the air is taken out of the pas- dle 1 (Fig. 43) to any of the following when the engine is running, when senger compartment. When turning positions: «1», «2», «3», «4» or the outdoor temperature is not on the recirculation mode there lights «AUTO». lower than 5 0С as well as when up the check light indicator located 3. Press A/C switch button 6 handle 1 is set to any of these on the button that will light green for with symbol . Check light indica- positions: «1», «2», «3», «4» or all the operation of the recirculation tor on the button will light green dur- «AUTO» (i. e. with the fan on). mode. 58 ATTENTION! Maximal cooling quality becomes poor because of The recirculation mode can be people's breathing. This can lead turned on only for a short time, as Used for the most intensive air to drowse of the driver and pas- fresh air does not enter the pas- cooling in the passenger compart- sengers. ment in hot weather or after long senger compartment; air quality When the desired temperature storage of the vehicle in the sun: becomes poor because of peo- level is achieved in the passenger ple's breathing. This can lead to 1. Air the passenger compart- compartment, by rotating handles 2 drowse of the driver and passen- ment, for this slightly open the win- and 1, you can select the optimal gers. dows and doors for a short time. comfort mode in the passenger 2. Turn handle 2 counter-clock- compartment. Cost-effective operation wise to the extreme left position of In the cooling mode it is not of the climatic system the blue area. recommended: 3. Set handle 4 with its mark in – to set the interior air tempera- Actuating the climatic system front of symbol . Nozzles 1 and 4 ture with a difference from outside air compressor is carried out with the (see Fig. 42) on the instrument panel temperature of more than 10-12 0С, vehicle engine, so its operation in the should be open. especially for short trips in the urban air cooling mode effects fuel con- 4. Turn on the maximum speed of cycle; sumption. Where possible to reduce the climatic system fan, setting han- – to direct cooled air flow to the time of using the air conditioner, you dle 1 (see Fig. 43) to position «4». side of the head, open skin areas, must follow these recommendations: 5. Switch on the air conditioner, since it can lead to hypothermia and – at high air temperature in the pressing button 6 with symbol . subsequent disease; passenger compartment before driv- Check light indicator on the button – to direct cooled air flow to the ing it is necessary to air it, opening will light green during all the opera- windshield, due to the big difference the windows or doors for a while; tion of the air conditioner. in temperature it can cause misting. – to improve air cooling efficiency 6. Turn on the recirculation mode, when switching on the cooling func- for this press button 3 with symbol ATTENTION! tion always close the windows and . Turning on the air conditioning hatches; system when driving in highlands – if comfort interior air tempera- ATTENTION! or heavy traffic conditions with ture can be achieved without switch- Recirculation mode can be en- a trailer can cause overheating ing on the refrigeration unit, it is abled only for a short time, as of the engine. preferable to use the ventilation fresh air is not supplied to the Follow the coolant temperature mode. passenger compartment, air alarm. If it indicates engine over- 59 heating, turn off the air condi- ically maintain interior air tempera- – turn on the air conditioner tioner. Otherwise, it may lead to ture you should turn on the air condi- (green LED will light ); damage or total failure of the en- tioner (see above «Interior air condi- – at the same time enable maxi- gine. tioning mode»), for most efficient mum air heating mode; Since the system compressor operation in the automatic mode of – direct the entire air flow into is driven with the engine of the maintaining the desired temperature windshield and front window demis- vehicle, when the air conditioner handle 4 is recommended to be set ter nozzles; operates there are possible small to position . If fan speed handle – turn on the climatic system fan changes in the engine operation 1 is set to position «AUTO», and han- to its maximum speed; (changing idle speed of the dle 2 is set to the extreme left posi- – in the design variant turn on engine shaft when switching on/ tion of the blue area (cold air), the electrical windshield heating (the off the air conditioner, reducing fan is automatically turned on to its LED on button 1 will light, See Fig. engine power when driving). maximal speed. 44); With negative ambient tempera- – disable the interior air recircula- tion mode (if enabled). Automatic mode for maintaining ture for most effective operation in If the ambient temperature is be- desired interior air temperature the automatic mode of maintaining the desired temperature handle 4 is low +5 0С the air conditioner will not work while the LED will light. Using handle 2 (see Fig. 43) you recommended to be set to position When repressing button 5 (See can set desired interior air tempera- or . If fan speed handle 1 is Fig. 43) with symbol automatic ture. The climatic system will auto- set to position «AUTO», and han- windshield cleaning will be off and matically maintain the set interior air dle 2 is set to the extreme right the climatic system will return to its temperature within performance of position of the red area (warm initial state. the climatic system and specified air), the fan is automatically tolerance. For most efficient opera- turned on to its maximal speed. Technical maintenance tion in the automatic mode of main- taining the desired temperature cli- Automatic windshield cleaning To ensure efficient operation of matic system fan control handle 1 the air conditioning system it is nec- should be turned on to position To clean windshield and front side essary to enable it for a short time (5- «AUTO» (for automatic control of air windows from fogging, frosting or 10 minutes) at least once a month (at flow rate). outside icing in the automatic mode positive ambient temperature). With positive ambient temperature press button 5 with symbol . The Refrigeration machine is charged and high air temperature to automat- climatic system will automatically: with a coolant and is under high 60 pressure. Trouble-shooting in the MULTIMEDIA SYSTEM USE system is not allowed. Contact any CHARACTERISTICS certified SSNEs. AND FEATURES

Windshield electric heating In the variant design the vehicle (WEH) is equipped with multimedia system (hereinafter MMS), which consists of: In the design variant the vehicle – control unit; is equipped with WEH system, which – interface cable; is used to quickly remove frost and – 7-inch TFT display. moisture from the windshield. Warning To activate the system, press Fig. 44. Windshield electric heating switch key 1 (see Fig. 44), when ac- switch Failure to comply with safety tuating the LED lights on the switch (in the design variant) rules may result in electric shock! key. The system operates only when To prevent accidents while driving: the engine is running. – do not set system playback WEH system is off: tion system in the passenger com- partment set to the mode of cleaning modes; – automatically in 6 minutes; windows of snow, ice or the mode of – do not set the sound very – when repressing the switch key defogging (see the relevant sections loud to hear horns of other vehi- during heating; of the manual). cles. – when car-system voltage falls below acceptable level; ATTENTION! – when engine speed reduces When washing the vehicle below acceptable one; avoid spilling liquids into the – when switching off the ignition. receiver. If the system is not switched off or This can lead to short circuits, automatically switched off before fire, or other damage. stipulated time, it is recommended to If possible do not park the vehi- turn off some other consumers and cle in places subject to direct try again. sunlight, which can lead to an The WEH system is most effective excessive increase in the temper- when using the heating and ventila- ature inside the passenger com- 61 If press briefly: In Contacts you may place a call or answer an in- coming call. In other cases you may move to «Phone». If press and hold: In Contacts you may place a call or answer an in- coming call. In other cases you may move to the phonebook. 5 – move to play back the previ- ous file (audio, video, images) or radio station. In the lists of files played (video, audio, images) – of press briefly: you may move to the previous folder/file; if press and hold: you may back to source folder. Fig. 45а. Multimedia system control buttons In the playback boxes – you may play back the previous file. In the «Radio»: – if press and hold you may switch partment. Before playing the Control unit temperature inside the passen- the following modes: search/move to ger compartment must drop. Multimedia control buttons are the previous memorized station. MMS is designed to connect to shown in Figure 45a. – if press briefly you may select the car system of 12 V with minus 1 – power on/off. the following modes: search with on the case. 2 – microphone. reducing frequency/move to the pre- USB and SD terminals are used 3 – turn on/off the sound vious memorized radio station. to connect SD-cards and USB- (MUTE). 6 – volume knob (encoder – thumb drives. Connecting of 4 – receive an incoming rotary encoder). By turning the vol- other devices may damage the call/move to «Phone»/move to ume knob you may adjust the volume system or the device connected. phonebook. level. 62 7 – move to play back the next cies for the radio station 18 – mode selection: «Radio»/ file (audio, video, images) or received/receive local/remote band switching/move to «Radio radio station. radio stations (AF). If press briefly settings». In the lists of files played (video, in the «Radio» and in the «Radio If press briefly: audio, images): you may move to the settings» you may switch on/off the – you may switch bands in the next folder/file. AF function. If press and hold in the «Radio»; In the playback boxes you may «Radio settings» you may switch – in other cases, you may move to play back the next file. «Radio». the remote station receive mode. In the «Radio»: If press and hold you may move to 14 – band search and automat- – if press and hold you may switch «Radio settings». ic memorizing of all found radio the following modes: search/move to USB-thumb drive is connected to the next memorized station. stations/turn on the RDS (AS/PS). the MMS with the terminal, which is – if press briefly you may select If press briefly in the «Radio» and located in the side glove box. the following modes: search with «Radio settings» you may turn increasing frequency/move to the on/off the RDS. If press and hold in next memorized radio station. the «Radio» you may start automati- 8 – end a phone call/reject an cally searching for and memorizing incoming call. In Contacts you may radio stations. exit from the window/end a call. 15 – open a folder, play/pause 9 – move to «Information» (ОК). In the «Radio» in the mode of (INFO). searching for radio stations you may 10 – SD-slot (SD). stop searching. In the box of media 11 – call system main menu content playback you may play back /select «Settings» (MENU). If press a file/pause. In the lists of played briefly you may move to Main menu, if press and hold you may move to files you may enter a folder/play «Settings». back a file. 12 – enter audio settings menu 16 – «Day/Night» mode selec- (AUDIO). You may move to audio set- tion (for the display screen). tings. 17 – media mode selection 13 – enable the function – (MEDIA). For «Audio», «Video», search for alternative frequen- «Images» (closed-loop work). 63 Multimedia system control (MMC)

Getting Started

To switch on the MMS press but- ton 1 (see Fig. 45а). To switch off the system press and hold button 1 for more than two seconds. To restart hold button 1 until the LADA logo appears on the display. You may control the multimedia system with the buttons on the con- trol panel, as well as with the touch buttons on the display (Fig. 45b and 45c).

Volume control

You may adjust the volume level by Fig. 45b. Main menu window rotating the volume knob 6 (see Fig. 45а) to the right or to the left. 1 – Radio – move to the mode of 7 – Settings – move to the setting receiving radio stations. selection menu. Main menu 2 – Telephone – move to the mode 8 – Pause indicator in the play- back mode*. After switching on the system for of operation with a cellular phone. 3 – Move to the main menu. 9 – Photos – move to the mode of the first time or rebooting it the dis- viewing images. 4 – Audio – move to the mode of play shows the main menu (Fig. 10 – Video – move to the mode of 45b). playing audio files. viewing video files. Pressing the buttons shown on 5 – Date, time. the display you may select the 6 – Move to the additional on- * These indicators appear in the modes of desired mode: screen menu. operation: «Audio», «Video», «Photos». 64 5 – buttons for stations memo- rized; 6 – FM2/FM3/FM4 – buttons to turn on the FM2-FM4 band; 7 – button to switch stereo- mono mode; 8 – FM1 – button to turn on the FM1 band; 9 – AM – button to turn on the AM band; 10 – button to move to the Radio setting menu; 11 – button to move to the Audio setting menu; 12 – PTY – filter by type of broad- casting programmes during auto search; Fig. 45c. Main menu window (cont.) 13 – 14 – buttons to select the type of broadcasting programmes. 1 – Information – displaying RADIO mode diagnostic messages. Switching to radio reception 2 – Screensaver – displaying the 1 – button to move to the main clock values to the entire display menu; Switching to radio reception is screen. 2 – button to increase resonant performed by one of the following When MMS operates, in different frequency; ways: menus on the bottom panel of the 3 – button to reduce resonant fre- – with button 18 (RADIO) on the screen, under the red line you can quency; control panel (see Fig. 45а); see the following information: date, 4 – button to activate automatic – with button Radio in the main time, information about the connect- settings on the station/browse but- menu (see Fig. 45b) on the display; ed phone via Bluetooth and muting ton of radio stations saved (short – by removing all external memo- display. press); ries (USB-thumb drive, SD-card).

5 Р.Э.-21920, англ. яз. 65 Buttons AM, FM1, FM2-FM4 (see Fig. 45d) allow you to select the desired operating range: – button FM1 switches the radio receiver in the range of (65 – 74) MHz; – button FM2-FM4 switches the radio receiver in the range of (87.5 – 108) MHz; – button AM switches the radio receiver in the range of (522 – 1620) kHz. If press and hold button 1 you exit to the main menu and mute the radio receiver. If press briefly button 1 you may move to the main menu not turning off Radio.

Fig. 45d. «Radio» mode window Station settings

To turn off the auto search Automatic search (auto search) Automatic scanning (before tuning the radio station) and memorizing stations To activate automatic tuning (auto touch anywhere on the screen. To activate automatically scan- search) of up (down) in frequency ning and memorizing radio stations, Manual tuning press button 5 (2) or 6 (3) and hold press and hold button 4 for more it in this position for more than 2 sec- than 2 seconds, then the MMS will onds. By turn press briefly buttons 5 (2) automatically tune to the frequency After tuning a radio station auto or 6 (3) to set the desired resonant of eighteen stations and memorize search will stop. frequency. them. After memorizing radio sta- 66 tions the MMS will be automatically Searches for stations by type of – connect the SD-card when the switched to listening mode to the broadcasting programmes USB-stick is not connected; first memorized radio station. – connect the USB-stick when the To stop the auto memorizing To select the type of programmes SD-card is not connected; mode just touch anywhere on the when receiving RDS-stations press – press button Audio (see Fig. screen. button PTY. The display will show 45b); or symbol PTY. Buttons(13)3 4(14) – press button 17 (MEDIA) on the Memorizing and listening to the allow you to select the type of pro- control panel (see Fig. 45а). stations memorized gramme that will be used in the auto- matic frequency search. Note.If Audio mode is paused (indi- To memorize the selected radio cator 8, see Fig. 45b) re-entry to the To automatically search for a radio station in the MMS, press and hold Audio mode will switch the MMS to the station broadcasting the selected any one of the buttons 5 for 2 se- audio playback mode. conds. To switch to a memorized type of the programme, press and 1 – button to move to the main station press briefly one of the but- hold buttons 5 (2) or 6 (3) for 2 tons 5. seconds. menu; On the control panel by pressing If the radio station with the select- 2 – button to up one level from the the button 14 (AS/PS) (see Fig. ed type of the programme is not folder; 44а), you may search for radio sta- available you will return to the initial 3 – button to select the SD card as tions in the band, and memorize all resonant frequency. the source; found stations, turn on and off the To turn off the auto search press 4 – button to select the USB card RDS mode. button PTY. as the source; Note. Search for stations by type of 5 – button to play back all files in Stereophonic radio reception broadcasting programmes is available in the folder for 8 seconds from the the mode of RDS and only in the band of When using the stereophonic FM2. beginning of the music piece; radio reception the display shows 6 – audio playback button; symbol OO, button 7 (see Fig. 45d). 7 – repeat play button; By pressing button you may switch AUDIO mode 7 8 – random play button; the MMS to monomode by force. 9 – scan play button; Note. Stereophonic mode is avail- Switching to the listening to audio able in bands of FM2 and FM2 provided files can be carried out in the follow- 10 – list of audio files with the cur- stable radio reception. ing ways: sor on the selected file. 5* 67 audio file allows you to play back this file; also, you may use the repeat play button (button 7); – pressing the audio playback button (button 6) allows you to play back all the audio files available in the list (10); – selecting a folder by a single click on the folder icon in the list (10), and then pressing the audio playback button (button 6) allows you to play back all the audio files available in the selected folder and its subfolders. 1 – audio playback time indica- tion; 2 – I button to return to the audio list window; 3 – I3button to play back the Fig. 45e. Audio file list window previous audio file; 4 –33button to fast playback of the file backwards; 5 – II /4stop /play (pause) but- Selecting audio files the folder icon you will see a list of ton. If you press the button the posi- audio files in this folder. To exit from tion played will be memorized. And The radio receiver can play MP3, the folder, press button 2. when you return to this page the WMA, WAV audio files. To play back audio files in the ra- playback will continue from the posi- Audio files and folders that are dio receiver you may choose the fol- tion memorized; available for playing appear in the list lowing ways: 6 –44 button to fast playback of (10) in Figure 45e. If double-click on – double-click on the selected the file forwards; 68 and then press the return button (button 2), you will go to the main menu, and the pause indication (indication 8) will appear on the Audio button (button 4, see Fig. 45b). This mode allows you to con- tinue playing of the audio file from the position that was paused. ATTENTION! Do not use USB hubs allowing one to connect two or more USB- drives at the same time. This may damage the unit. When you select MEDIA mode switching to files (audio, video), and viewing images is carried out about a closed path.

Fig. 45f. Audio playback window

7 –4I uI button to play back the If there is an image or description next file; attached to the audio file, this infor- 8 – button to move to the Audio mation is displayed on the screen while playing the audio file. setting menu; To continue playing the audio file 9 – move to the next folder to play from any of its position press the time back files; indication. To stop playing, press 10 – name of the current folder; button 5 (Fig. 45f). 11 – move to the previous folder If while playing the audio file you to play back files. press the pause button (button 5), 69 VIDEO mode

Switching to the video playback mode can be carried out in the fol- lowing ways: – connect the SD-card (with no audio files), when the USB-stick is not connected; – connect the USB-stick (with no audio files), when the SD-card is not connected; – press button Video (see Fig. 45b); – press button 17 (MEDIA) on the control panel (see Fig. 45а). Note. If Video mode is paused (indi- cator 8, see Fig. 45b) re-entry will switch Fig. 45g. «VIDEO» mode window the MMS to the video playback mode. 1 – button to move to the main menu; 7 – random play button; 2 – button to up one level from the 8 – scan play button; 9 – list of video files with the cur- folder; sor on the selected file. 3 – button to select the SD card as the source; 4 – button to select the USB card as the source; 5 – playback button; 6 – repeat play button; 70 file; also, you may use the repeat play button (button 6); – pressing the video playback button (button 6) allows you to play back all the video files available in the list (9); – selecting a folder by a single click on the folder icon in the list (9), and then pressing the video playback button (button 5) allows you to play back all the video files available in the selected folder and its subfolders. 1 – video playback time indica- tion; 2 – button to return to the video selection menu; 3 – 3I button to play back the Fig. 44h. Video playback window previous video file; 4 –33button to fast playback of the video file backwards; Selecting video files box (9) (see Fig. 45g). If double-click 5 – II /4 stop /play (pause) but- on the folder icon you will see a ton. If you press the button the posi- The MMS can play WMV video list of video files in this folder. To exit tion played will be memorized. And from the folder, press button 2. files with a resolution of 320x240 px. when you return to this page the To play back video files in the To convert video files, you may use radio receiver you may choose the playback will continue from the posi- any available video converter. following ways: tion memorized; Video files and folders available – double-click on the selected 6 –44button to fast playback of for playing are displayed in the list video file allows you to play back this the video file forwards; 71 7 –4I button to play back the next video file; 8 – full-screen play button; 9 – button to move to the Video setting window; 10 – button to move to the Audio setting menu; 11 – move to the next folder to play back video files; 12 – name of the current folder; 13 – move to the previous folder to play back video files; To continue playing the video file from any its position press the time indication. To turn on the full-screen play- back mode, press button 8 (Fig. 45h) Fig. 45i. «Images» mode window or the icon. To exit from the full-screen play- When you select MEDIA mode ed card. You may also move to the back mode touch once anywhere on switching to files (audio, video), and «Photos» window mode, pressing the screen. viewing images is carried out about a button 17 (MEDIA) on the control If while playing the video file you closed path. press button 5 and then press return panel (see Fig. 45а). 1 – button to move to the main button 2, you will move to the main Image mode menu and the pause indication will window; appear on the Video button (see Fig. To view image files, press button 2 – button to up one level from the 45b). This mode allows you to con- Photos (see Fig. 45b), after that you folder; tinue playing of the video file from the will see a menu with a list of image 3– button to select the SD card as position that was paused. files that are available on the select- the source; 72 4– button to select the USB card as the source; 5 – playback button; 6 – repeat play button; 7 – random play button; 8 – scan play button; 9 – list of files with the cursor on the selected file, sorted in alphabeti- cal order.

Selecting image files

The MMS can play .JPEG, .JPG, .JPE, .BMP, GIF, .PNG files. The table shows approximate time of loading jpeg file:

Opening time jpeg file size (seconds) Fig. 45j. Image file playback window 800х1397 рх, 1 MB ~ 1 sec 1024х1789 рх, 2 MB ~ 3 sec 800x1397 px, because this file is Click on the file icon in the list and 1200х2096 рх, 2.5 MB ~ 4 sec opened in one second that corre- press button 5 or double-click on the 1978х3456 рх, 7 MB ~ 9 sec sponds to the minimum time of view- selected file to start viewing files ing images in a slide show mode. from the file highlighted in the list by Opening files of more than 7 MB cursor. To make a slide show the takes quite a long time and viewing Files and folders available for viewing appear in the list (9) (Fig. repeat play mode must be switched them on the device is not recom- on. The MMS will move to the image mended. 45i). To display a list of files within a playback window. It is recommended to use a file the folder, click on the folder icon in 1 – button to return to the file se- size of which does not exceed 1 MB the list (9). To exit from the folder, lection menu; with a resolution of no more than press button 2. 73 2 – 3I button to play back the previous image file; 3 – II /4 stop /play (pause) but- ton. If you press the button the posi- tion played will be memorized. And when you return to this page the playback will continue from the posi- tion memorized; 4 –4I button to play back the next image file; 5 – full-screen play button; 6 – button to move to the Image setting window; 7 – button to move to the Audio setting window; 8 – button to select the audio playback when viewing images; Fig. 45k. «Phone» mode window 9 – move to the next folder to play When you select MEDIA mode PHONE mode back image files; switching to files (audio, video), and 10 – name of the current folder; viewing images is carried out about a 1 – button to move to the main 11 – move to the previous folder closed path. menu; to play back image files. 2 – button to play back audio files When viewing images press but- via the phone; ton 3 (Fig. 45j), and then press return 3 – button to switch off the loud button 1, you will move to the main speaking mode while talking on the menu and the pause indication will phone; appear on the Images button (See 4 – call/call completion button; Fig. 45b). This mode allows you to 5 – connected phone indication; continue reviewing images from the 6 – button to move to the Phone position that was paused. setting menu; 74 7 – button to move to the phone- book; 8 – button to redial a call (redial button); 9 – button to delete the last en- tered character (delete button); 10 – subscriber's number display field; 11 – dialling keypad. Press button 6 (Fig. 45k) to con- nect your phone via Bluetooth (here- inafter BT) and make the steps de- scribed in the SETTINGS mode.

Dialling number Fig. 45l. Phone connection window

Select the operating mode by button 4 (see Fig. 45l). To redial the the MMS is switched to BT mode, a pressing button Phone (see Fig. last number dialled, press button 8 dialog box with the subscriber's 45b) in the main menu on the display. (see Fig. 45k). number appears. To receive a call Dial the number using the numeric 1 – button to switch on voice con- press button 3 (see Fig. 45l). To turn keypad (buttons 11, see Fig. 45k). nectivity (car audio system); off the speakerphone during a con- To correct spelling errors, use but- 2 – button to switch the call over versation via the car's audio system ton 9. Press once to delete the last the phone; and continue speaking on the phone, character entered. Press and hold 3 – call receive button; press button 2. To return to the button 9 for more than a second to 4 – call completion button; speakerphone, press button 1. To delete the entire entry. Press button 4 5 – telephone directory (active end the call press button 4. to call a subscriber, and the dialog subscriber's number is highlighted). Also, to receive a call, you can box appears. To end the call press If a call comes to a cellular phone, press button 4 (see Fig. 45a – hand- 75 Fig. 45m. Phonebook window

set) on the control panel; to end a the phone book (Fig. 45m), then the call, press button 8. phone connection window will To move to the phonebook, press appear (see Fig. 45l). button 7 (see Fig. 45k). For the first To call one of the contact num- connection the phonebook will be bers, you need to select it in the loaded via your phone. Download list 5) and press button 3. To cancel time depends on the size of the the call press button 4. phonebook and it may take a few minutes. Images of your phone con- tacts are not transferred. To make a call from the phone book, select a contact from the list in 76 Playbacking audio files via the phone

In Bluetooth mode, if «A2DP» pro- tocol is supported by the phone, you may listen to audio files played on the cellular phone via the car audio system. 1 – button to return to the file se- lection menu; 2 – 3I button to play back the previous image file; 3 – II /4stop /play (pause) but- ton. If you press the button the posi- tion played will be memorized. And when you return to this page the playback will continue from the posi- tion memorized; 4 –4I button to play back the Fig. 45n. Playbacking audio files via the phone next image file; 5 – button to move to the Audio If you press the play button (but- playback is paused. Audio format setting window. ton 3) you will launch the Player in support for playback via Bluetooth is To switch to this mode press but- limited by the phone player version. ton 2 (see Fig. 45k). The screen of the phone in the background mode. playbacking audio files via the phone If you open it you will see the infor- is similar to the screen of playback- mation about the currently playing ing audio files via SD and USB-cards track. Playback control can be per- and has the following buttons (Fig. formed via the phone player. 45n). Information about the currently While receiving an incoming call/ playing file is not displayed. making an outgoing call the audio 77 INFO mode

The screen displays information about versions of the software used in the product. 1 – button to move to the main menu. When press button 9 (INFO) on the control panel (see Fig. 45а) you may move to «Info» mode.

Fig. 45o. «Info» mode window

78 SETTINGS mode

1 – button to move to the main menu; 2 – button to move to the general settings menu; 3 – button to move to the Phone 1 setting menu; 4 – button to move to the Audio setting menu; 5 – button to move to the display setting menu; 6 – button to move to the viewing setting menu; 7 – button to move to the video player setting menu; 8 – button to move to the radio re- ceiver setting menu. Fig. 45p. «Settings» mode selection window

79 General settings mode

1 – button to return to the previ- ous menu; 2 – button to set a screen saver; 3 – factory setting button; 4 – indicator and language setting buttons; 5 – indicator and date setting but- tons; 6 – indicator and clock setting buttons. To set a screen saver you should press button 2 (Fig. 45q). The saver is displayed on the screen, indicating time and date, if for one minute the user takes no actions with the MMS.

Fig. 45q. General settings mode

80 Display setting mode

1 – button to return to the previ- ous menu; 2 – buttons to switch the display light mode; 3 – buttons to adjust display im- age settings; 4 – button to move to the touch screen calibration mode. For better readability of the dis- play, depending on time of day, you may set display operation modes: Day – comfort glow of the display in bright light. Night – comfort glow of the dis- play in the dark. For each operation mode of the Fig. 45r. Display setting window display (Day or Night) you may change your own display image set- tings: Brightness, Contrast and Saturation. From now, call new settings by pressing once button Day or Night. Pressing button Auto displays the following settings – Brightness, Contrast and Saturation – to the middle position. To change image settings use buttons 4 (Fig. 45r).

6 Р.Э.-21920, англ. яз. 81 Fig. 45s. Audio setting window

Audio setting mode To set audio quality you need, use preset-tuning buttons 2 or equalizer 1 – button to return to the previ- buttons 4 after turning on the cus- ous menu; tom setting with button 3 (Fig. 45s). 2 – equalizer preset-tuning but- To enable/disable frequency tons; response equalization at low volume 3 – button to switch on equalizer custom setting; levels (loudness) you should press 4 – buttons and equalizer indi- button 6. cator; Balance adjustment field 5 is used 5 – balance adjustment field; to set the desired volume distribution 6 – loudness button. around the passenger compartment. 82 Receiving RDS-stations is avail- able in FM2 (87-108) MHz. Availability of RDS functions depends on a spe- cific RDS station.

Switching on alternative frequency receive mode

If a signal level of the received sta- tion is poor (for example, when mov- ing from one area to another), the RDS system is automatically tuned to other RDS stations with a high signal level, broadcasting the same pro- gramme of the same radio station (with the same PI-code), but at anoth- er broadcasting frequency (alterna- tive frequency). If a radio station with Fig. 45t. Radio setting window this programme at alternative fre- quencies is absent, the radio receiver Radio reception setting mode Selecting modes while receiving remains tuned to the current station. RDS-stations Press button AF (see Fig. 45t) in the receiver settings window to activate 1 – button to return to the previ- RDS (Radio Data System) trans- the alternative frequency reception ous menu; mode. While losing signal strength of 2 – RDS setting buttons; mits additional information signals in the digitized form together with the received radio station the receiver 3 – button to receive a signal from broadcasting signal: station identifi- will be automatically switched to the remote stations. cation code (PI, Programme Identi- search mode of the received radio Reducing receiver sensitivity fication), radio text, standard time station at alternative frequency of (Local mode) for selection of radio signals, traffic information, etc. broadcasting. To disable the alterna- stations with high reception is carried Receiving RDS-signals extends serv- tive frequency reception mode press out by pressing button 3 (Fig. 45t). ice capabilities of the receiver. button AF repeatedly. 6* 83 Enabling traffic control information receive mode

Press button TP to enable the dis- play mode of receiving messages about traffic control. The Radio win- dow will show symbol TP (see Fig. 45d). When receiving a message on the traffic control it will be repainted in a lighter colour.

Enabling receive mode of urgent information about changes on the roads

Press button TA to activate the display mode of receiving urgent messages about changes on the Fig. 45u. Video playback setting window roads. The Radio window will show symbol TА (see Fig. 45d). When receiving an urgent message about – auto zoom; the traffic it will be repainted in a – adjustment across the width lighter colour. with saving the current proportions, and possible vertical cutting; Video playback settings – adjustment across the height with saving the current proportions, 1 – button to return to the previ- and possible horizontal cutting. ous menu; 2 – video display setting buttons. By selecting one of the buttons 2 (Fig. 45u) you may select one of the image zoom modes: 84 Image view settings

1 – button to return to the previ- ous menu; 2 – slider to set time for one frame display; 3 – buttons to switch on the effect of jump between frames; 4 – image display setting buttons. By selecting one of the buttons 4 (Fig. 45v) you may select one of the image zoom modes: – auto zoom; – adjustment across the width with saving the current proportions and possible vertical cutting; – adjustment across the height with saving the current proportions Fig. 45v – Image setting window and possible horizontal cutting. After pressing button 3 frames will be changed with the effect of jump. Slider 2 sets the frame display time in a slide show.

85 windows: main menu, phone, radio, audio, video, images, settings, infor- mation. Button Automatic connection is designed to restore phone connec- tion, after losing Bluetooth-signal from the mobile device. Button Auto reply is designed for automatic receiving of an incoming call. The MMS at the same time can work only with one phone. To con- nect another phone to the MMS you should choose a phone name found in the list, or search again by select- ing «Device search».

Fig. 45w. Phone setting window Note. Some models of cellular phones may not work properly in the Bluetooth mode with the MMS, which is Connecting the phone with phone. To select it from the list click not a malfunction. To check the opera- Bluetooth on it once. Your phone will receive a tion of the system, check it with the other cellular phone. prompt to confirm the connection Before connecting, make sure and a request to enter a password. that the phone has Bluetooth. To connect a device via Bluetooth, To connect to the MMS switch on enter the phone password that is Bluetooth in the phone. If your phone «0000». Wait for the connection. Go is discoverable, turn on this mode. back to the window «Telephone». Then in the phone settings menu, Phone connection confirmation is press button Device search. After displayed with appearance of a searching in the list of detected phone symbol (5) (see Fig. 45k) in devices, find the name of your the lower left corner in the following 86 The list of types of radio programs transmitted by the RDS system Search function parameters of the receiver when the RDS modes are on No. Program type Display image 1 News NEWS When you activate the RDS mode (A F, 2 Current affairs CURRENT AFFAIRS PTY light on the display) the auto search is 3 Information INFORMATION 4 Sport SPORT carried out in accordance with the selected 5 Education EDUCATION mode. 6 Drama DRAMA The AF mode searches for only a radio 7 Culture CULTURE station that supports the RDS. 8 Science SCIENCE The PTY mode searches for only a radio 9 Varied VARIED station that supports the RDS and broad- 10 Pop music POP MUSIC cast program, which correspond to the 11 Rock music ROCK MUSIC user's type. 12 Easy listening EASY LISTENING Therefore, to search for all available sta- 13 Light classical LIGHT CLASSICAL tions in the selected band you must discon- 14 Serious classical SERIOUS CLASSICAL nect AF, PTY and TA modes with the corre- 15 Other music OTHER MUSIC sponding buttons, i. e. AF, PTY and TA indi- 16 Weather WEATHER cation must be absent on the display. 17 Finance FINANCE 18 Children's programmes CHILDREN’S PROGRAMMES External media formats 19 Social affairs SOCIAL AFFAIRS 20 Religion RELIGION The radio receiver works with external 21 Phone-in PHONE-IN medias of the following formats: 22 Travel TRAVEL – SDHC 1 – 32 GB; 23 Leisure LEISURE – SD 1 – 32 GB; 24 Jazz music JAZZ MUSIC – USB 2.01 – 64 GB; 25 Country music COUNTRY MUSIC – USB 3.01 – 64 GB. 26 Nation music NATION MUSIC 27 Oldies music OLDIES MUSIC 28 Folk music FOLK MUSIC File systems: 29 Documentary DOCUMENTARY – FAT 16; 30 Alarm test ALARM TEST – FAT 32. 31 Alarm ALARM 87 Video conversion instructions

To convert video files it is recom- mended to use Free-make Video Converter, available for download at http:/www.freemake.com/ Video parameters should be the following: – frame width should be 320 pix- els, frame height should be 240 pix- els. Fig. 45x. USB connector location It is necessary to use WMV3 video codec. Frame frequency should be 25 Where to connect the frames per second. USB-drive Video speed (bitrate) should be no more than 750 Kbit/sec. The MMS has the ability to con- It is necessary to use WMA audio nect the USB-drive of 1 to 64 GB to codec. play back audio, video and images Audio sampling rate should be on the MMS. 441,000 Hz. USB connector 1 (Fig. 45x) is Audio speed (bitrate) should be located in the upper left corner of the 128 cbl/sec. side glove box.

88 VEHICLE OPERATION Safety precautions when driving

Do not exceed the vehicle load specified in the manual. Overloading causes damage to suspension com- ponents, premature tire wear and NUMBER PLATE INSTALLATION loss of stability of the vehicle. Do not drive fast on roads with Front number plate 4 (Fig. 46) is broken pavement, as sharp blows secured with two self-tapping screws can deform parts of the power unit, 2 and washers 3 to front bumper 1. the body and the suspension. Fig. 46. Mounting number plates Before installing the rear number In the case of strong shocks (for plate insert plastic bushings 6 into example, when approaching a curb), holes of back wall 5, set number to avoid a sudden accident situation, In order to reduce vibration trans- plate 9 and secure it with self-tap- contact any certified SSNE to check mitted from the front suspension to condition of the vehicle. ping screws 7 and washers 8. the steering gear, the steering box is Regularly check condition of pro- attached to the body panel via rub- tective rubber covers of the steering ber mounts. Structural elasticity of SAFETY VEHICLE OPERATION rack, ball bearings, shift rod, front connection provides mobility of the BASIS wheel drive joints, as well as protec- crankcase towards the body. tive caps of steering joints. If a cover ATTENTION! Your safety and environmental or a cap is damaged, improperly installed, or twisted, then dust, water To lubricate components and protection depend on technical serv- and dirt will penetrate with a joint or a assemblies use materials that are iceability of your vehicle and compli- gear, that will cause their increased recommended by the manufac- ance with the rules of its operation. wear and corrosion. Therefore, you turer in Appendix 1. The use of The following recommendations will must replace any damaged cover or other materials may result in pre- greatly enhance your safety on the cap with a new one, and adjust mature wear and damage to roads and will keep your vehicle in improperly installed or twisted cover these components and assem- good condition. or cap. blies. 89 To keep the engine from very high The vehicle is equipped with the able connection. Note that corrosion speed when driving change gears in clutch cable with the clutch lining of terminals and clamps as well as time. Thus, you will reduce engine wear compensation mechanism, due their poor connection cause poor wear and fuel consumption. to which the drive is not adjusted contact sparking that can lead to fail- manually for all service life of linings. ure of electronic car equipment. ATTENTION! To avoid slipping of the clutch, after Also, do not check operation of the The vehicle engine is designed changing the gear and throwing in generator when the engine is run- to use gasoline the octane num- the clutch take your foot off the ning by removing the clamps from ber of which must be not lower pedal. the battery. than that specified in Appendix 1. ATTENTION! Warning Vehicle operation with using While driving, do not keep your The vehicle is equipped with gasoline with a lower octane foot on the clutch pedal and do high energy ignition system. number will lead to the failure of not keep your hand on the gear Therefore, with the engine run- engine! lever, this may result in damage ning do not touch the ignition sys- Regularly check tire air pressure, and premature wear of parts of tem components: it is dangerous. the gear-change lever. as operation of tires pressure of In addition, it is not recommended When using the pedal to throw which is higher than recommended to carry out spark test of high-volt- in the clutch, gear components (see the section «Tires and wheels»), age circuits, as this may lead to fail- are opened and closed in the leads to premature wear, increased ure of ignition system components. clutch lining wear compensation fuel consumption, as well as reduc- When servicing a vehicle with an 8- mechanism that can be accompa- tion of stability and readability of the valve engine check high-voltage nied with a click. vehicle. wires for reliable connection to coils This click should not raise fears and sparkplugs. Warning that the clutch linkage works When dismantling high-voltage improperly; it can appear and dis- Even if pressure on one axis is wires from ignition system devices appear as the linings wear, and only 0.02 – 0.03 MPa more than hold to their protective caps. Do not clutch engagement as well as on the other one, it makes driving touch high-voltage wires when declutching is fully guaranteed. bad and when emergency braking dismantling! it can lead to skidding of the vehi- Always clean terminals and bat- To avoid discharging the battery cle! tery clamps and check them for reli- when the engine is not running, do 90 not leave the key in the ignition – driving modes – sudden start- 3. Check levels of coolant, brake switch for a long time. ing, including starting with the hand- and washer fluids and if necessary, Do not open the doors sharply. Do brake on, turn while skidding front adjust them. not keep doors opened when stop- wheels at maximum engine speed – 4. Check bulbs of exterior lights ping at strong wind, to avoid deform- is not allowed because it causes for normal operation and clean them ing the front edges of doors. damage to the differential. if necessary. After running of the first 2000 km, In winter, when a layer of ice or 5. Check wiping system for nor- snow on drop windows makes it diffi- you can smoothly increase the engine speed and vehicle speed. mal operation. cult to roll up and down them, do not 6. Check mirrors, seats and seat Warning apply a force when rotating the han- belts for proper installation. dle, so as not to damage the window- The operation of new tires, 7. Check primary braking system lift mechanism. To avoid a failure of brake pads and discs, clutch is (no failure of the brake pedal) and power windows it is necessary to optimized only after their running- parking braking system (handbrake in (grinding). Therefore, for the clean the windows of ice and snow. lever lock) for normal operation. first 500 km, drive smoothly and If there are traces of oils and fluids Operation of a new car pick up moderate speed. If during further operation these compo- under the vehicle, they mean that its components and assemblies are not During break-in of a new car until nents are replaced, follow the guidelines for run-in once more. sealed. In this case, you must con- it runs the first 2,000 km: tact any certified SSNE for trou- – after covering the first thousand Preparing the vehicle for driving bleshooting. of kilometres check wheel bolt tight- ening and, if necessary, tighten; ATTENTION! ATTENTION! – when driving do not exceed the Before coming out of the In time repair detected trou- speed of 110 km / h and the engine garage or parking space, check bles at certified SSNEs. speed of 3500 min-1; technical condition of the vehicle. – timely, in accordance with road To do this: Driving position at the wheel conditions, put into higher gears in 1. Check and adjust air pressure the gearbox, avoiding overloading of in the tires (see Table 2 in the section Warning the engine; «Tires and wheels»). – do not tow a trailer or other vehi- 2. Check oil level in the crankcase, Safe driving technique largely cle; and if necessary adjust it. depends on correct driving posi- 91 tion. Correct driving position – pump has time to raise the pressure in 5. If the second start attempt was the driver bears on the seat back the fuel rail to the working value. unsuccessful, the third attempt tightly enough, his/her legs are should be made not earlier than in 40 ATTENTION! not fully spread at full pedal trav- seconds with the accelerator pedal el, and both arms slightly bent at During starting the engine, do fully depressed (cylinder blowing the elbows, hold the upper part of not press the accelerator pedal. mode). In 6-8 seconds of cylinder Cold start of the engine is opti- the steering wheel. The body blowing smoothly release the accel- mized to environmental tempera- position should be firm but not erator pedal. ture of minus 27 0С; and the driver strained – it prevents fast does not need to control the Note. After unsuccessful starts, if exhaustion. necessary pressing the accelerator throttle valve plate. When press- pedal, you can use the manual brake ing the accelerator pedal until it pedal instead of the brake pedal. Engine start stops in the engine start mode, 6. If the third start attempt fails, the fuel supply is locked to drain then either the environmental tem- These recommendations provide engine cylinders of excess fuel perature is below minus 27 0С (limits starting of properly operating engine after unsuccessful starts. with storage battery, charged by at of cold start without auxiliary units), least 75%, with engine oil of SAE vis- 3. Switch on the starter. Hold the or the engine is faulty, or there is any cosity grade, corresponding to envi- pressed clutch pedal until the engine deviation from the recommendations ronmental temperature (see Appen- stops starting and runs up to idling. above. After starting the engine release the dix 1), with gasoline of volatility class ATTENTION! ignition key – the starter will be for winter period, depending on cli- switched off. Do not start driving by using matic area of application. the starter. Under normal condi- 1. Before starting the engine, Note. Do not switch on the starter for more than 10 seconds. If you exceed tions, start driving in the first gear insert the key into the ignition switch, the allowable switch on time of the starter in the gearbox. press the brake pedal, depress the the electronic engine control system clutch pedal until it stops, move the opens the starter circuit. Warning gear-change lever to the neutral 4. If within 10 seconds of the Exhaust gases are poisonous! position. starter operation the engine is not Therefore, the room where you 2. Switch on the ignition pause a started, repeat the start no earlier start and warm up the engine, few seconds so that the electric petrol than in 40 seconds. should be well ventilated. 92 Operation features of the vehicle misfires in the engine cylinders high operating temperature, with the fuel injection system (external manifestations – engine that's why it is strictly prohibited conks and jerks when driving), as to place and store flammable If «Engine» alarm lights (see the unburned fuel in the cylinders will materials and objects (cloth, section «Instrument cluster») with be ignited in the catalytic con- paper, etc.) in the engine com- the engine running it indicates a verter and the temperature will partment to prevent possible fire fault. But this does not mean that the rise sharply, that will cause dam- hazard. engine should bestopped immedi- age to the catalytic converter ele- ately – the controller has backup ment. Electronic engine control Operation features of the vehicle modes that allow the engine to oper- units have the function of protect- with the electric power steering ate in conditions close to normal. ing the converters against misfir- ing. When misfires appear in one ATTENTION! The vehicle is equipped with the or two cylinders the «Engine» electric power steering (hereinafter – However, the cause of the fault alarm is switched in the flashing EAS), through which driving becomes must be corrected at any certified mode; the fuel delivery is easy and pleasant. The EAS is locat- SSNE as quickly as possible. switched off in the cylinders, ed in the steering column. The EAS The engine with the fuel injection where the misfires were detect- quickly tracks all control actions on system, if the catalytic converter and ed; then the «Engine» alarm lights the steering and increases the the oxygen sensor are available, continuously until you stop driv- torque transmitted by you through operates properly in the case when ing. If you detect misfires you the steering wheel, according to the only natural gasoline is used. Leaded need to take urgent measures to specific algorithm depending on the gasoline in the short term leads to eliminate them. vehicle speed. Vehicles equipped with catalyt- the failure of these components; ATTENTION! smoky exhaust appears, fuel con- ic converters can be started by sumption increases rapidly and vehi- towing only with the cold engine. Low force on the steering cle dynamics becomes poor. It is preferable to start the engine wheel provided with the EAS, can with another storage battery or turn the steering wheel at high ATTENTION! external power supply of 12 volts; speed. In extreme positions there The catalytic converter is an in any case, do not use the starter may be minor impacts of the expensive unit providing environ- to drive the vehicle. The vehicle is steering limiter with the crank- mental protection. The catalytic equipped with the downpipe with case, accompanied by a slight converter can be damaged with the catalytic converter having a knock. To avoid damage to the 93 steering box you should control FEATURES OF VEHICLE VEHICLE DRIVING the rotation speed of the steering OPERATION WITH DAYTIME wheel in extreme positions and RUNNING LIGHTS Start driving the vehicle only after apply no force when the rack cleaning windows of ice, snow and rests against the limiter. Vehicles’ composition 2192 and after fogging to a level that ensures It is not recommended to drive 2194 (regardless of variant versions) safety. with a faulty EAS when the control includes daytime running lights, Driving the vehicle with negative indicator lights up in the instru- which are intended to ensure better ambient temperature is recommend- ment cluster. visibility of vehicle during driving in ed to start no earlier than in 30 sec- The failure cause of the EAS the daytime because of higher pho- onds after starting the engine. To must be located and removed as tometric parameters in comparison provide a partial warming of the oil in soon as possible at any certified with parking lights. Daytime running the gearbox it is necessary for the SSNE. lights are located in headlamps and engine to run for some time at the The EAS does not work or can are activated automatically at the minimum idling speed when the be switched off in the following moment, when ignition key is in the situations: clutch pedal is released. If you do not – if the vehicle engine does not position «ignition». have such possibility, and you warm run; In variant version daytime run- up the engine and the gearbox while – if the vehicle speed sensor is ning lights switch on automatically driving, after a long parking at a low disconnected; after engine start. Daytime running ambient temperature it is recom- – if the vehicle is parked for a lights work continuously from the mended for some time to drive in long time (more than 5 minutes) beginning of movement to switching lower gears at low speed of the with the engine running at a off the engine and they switch off engine shaft. While you warm up the speed of 1,500 min-1; only in case of parking lights are on. oil in the gearbox then consistently – if the car-system voltage is change to higher gears. Caution reduced; ATTENTION! – if idle run of the vehicle It is not recommended to engine has low speed of rotation. switch on parking lights in day- To avoid damaging the gear- Such disconnections are time and in good visibility, as it change control lever inside the caused by the EAS operation will switch off daytime running gearbox due to frozen oil, do not algorithm and are not a malfunc- lights, reduce safety and breach apply force to the gear lever and tion. traffic safety rules. do not throw in. 94 Driving technique of front drive Also, fuel consumption is increa- long driving on wet roads when water vehicle is specific and slightly differ- sed when towing a trailer. In addition, enters the brake system, brake ent from driving technique of rear when towing the trailer the loads on smoothly several times to dry discs, drive vehicle, especially when cor- the body, the engine and the trans- drums and brake pads. nering. When approaching to the mission are increased and reduce Warning turn you should assess it in advance, their operation life. and, depending on the radius of the While driving, keep an eye on the Be very careful in first minutes turn and road conditions, reduce the operation of various systems on the after the rain, as wetted dust on speed and drive through the turn, relevant devices and alarms. Under the road surface forms slippery gradually increasing the rotation normal conditions, red alarms must coat that sharply reduces tire grip speed of the engine shaft. This not light – they indicate that it is nec- on the road. allows you to pass the turn steady essary to check the relevant system even in slippery areas, avoid sudden ATTENTION! at any SSNE. When driving on pud- braking or rapid throttle lifting off in After overcoming fords or deep dles reduce speed to avoid the turn, which can lead to loss of puddles and if you intend to park wheel gripping, respectively, to loss hydroplaning, which can cause a the vehicle for a long time, it is of control of the vehicle. skid or loss of control. Worn tires necessary to provide short run of If possible drive without sharp increase this danger. the vehicle to dry the assemblies accelerations and decelerations, as ATTENTION! in order to avoid corrosion dam- it leads to increased tire wear and To prevent engine damage age to the clutch collar bearing increased fuel consumption. Fuel and front and rear wheel bear- consumption is also increased caused by water entering its cylinders through the air intake, it ings. because of low air tire pressure, worn While overtaking in rainy weather or dirt sparkplugs, using of motor oils is not allowed to overcome body switch on the windshield wiper to the for the engine with higher viscosity of water with a depth of more than maximum mode (see the section than recommended. 300 mm. Driving on relatively «Wiper switch») – this will help you to deep bodies of water should be ATTENTION! avoid the loss of visibility due to the carried out with the least possible potential release of water by the Sudden starting, including speed in order to avoid waves that wheels of transport being overtaken. starting with the handbrake on, it can fill in the engine air intake. is not allowed to turn the front It is recommended to observe these wheels to slip at maximum engine After overcoming puddles, and safety precautions if you are overtak- speed! after washing the vehicle or during en. 95 Warning the wiper blades are not completely steer in the direction of skid and Do not overtake in rain, if water thawed. align the vehicle by operating the cloud made with wheels of the When driving in snow, if the wiper steering wheel and the gas pedal vehicle in front completely blocks cannot remove snow from the wind- smoothly. shield and it begins to cover with ice, the zone of overtaking. Cross-over points are often cov- Not to drive in the line of vehi- use the functions of the ventilation and heating system control unit (see ered with icing because of wheel slip cles in front when it rains, when starting off. Therefore, when increase the distance and reduce the section «Ventilation and heating you approach to these points, in the speed. system control in the passenger compartment»). Once the windshield advance, on a dry site, start to When driving along sidewalks in warms up and the layer of ice thaws reduce the speed. rain or after it, reduce the speed out, remove it using the wiper while driving through puddles to blades. Driving in mountains avoid splashing foot-passengers with water. Warning ATTENTION! Snow adhering to the wind- When upgrading, timely Driving in winter shield wiper arms makes it diffi- change to lower gear in the gear- cult for them to work properly. box, avoiding overloading the To create comfortable environ- Stop off observing the road rules, engine and jerking the vehicle. ment inside the vehicle at ambient turn off the wipers and remove temperature of below zero you the snow. On long hills use the engine in the should warm up the engine. Be very careful on wet or slip- braking mode (the accelerator pedal In frosts before each first switch- pery road sections – do not brake is released with the gear on) with ing of wipers during the whole driving hard, do not press and release partial use of the service brakes. you should check if the wiper blades the accelerator pedal hard. For are frozen to the windshield. If the this enddrive the vehicle smooth- Warning wiper blades are frozen to the wind- ly, without sudden movements of Do not get down with the clutch shield, use the functions of the venti- the steering wheel. Slow down off and with using of service lation and heating system control gradually changing to lower gear brakes only. This leads to heating unit (see the section «Ventilation and in the gearbox with partial brak- of the brakes and boiling of the heating system control in the pas- ing of service brake. If for all that, brake fluid. Keep in mind that senger compartment») as long as the vehicle is started to skid, while increasing the height the 96 brake fluid boiling temperature BRAKING AND PARKING Sitting down behind the wheel of decreases. Boiling the brake fluid the vehicle for the first time, check in the wheel cylinders means a Warning the brakes at moderate speeds to acquire first skill of braking. complete failure of the service Learn how to brake smoothly, brakes – the brake pedal fails. avoiding blocking the wheels. It is ATTENTION! In mountains keep to the right side better to brake smoothly with the To avoid adhering the brake service brake and simultaneous of the road. Smaller width of the road pads to the drums, do not park changing to lower gear in the and complex profile of the route the vehicle with the parking brake gearbox. require more attention and care. on for a long time. Using the gear that is too low for When you stop down uphill and the actual speed to brake the Warning downhill on the way turn the steering engine on slippery or wet road, as In case of failure of one of the wheel until hard stop so that in case well as sudden clutch engagement braking system circuits the sec- of spontaneous driving of the vehi- may cause bond failure of wheel ond circuit provides braking of cle, its wheels bear against the curb gripping and loss of vehicle stabil- the vehicle. In this case, the pedal of the road. ity. To brake with engine choose travel increases and braking effi- On slippery roads do not start the speed relevant to the gear and ciency decreases, that you may driving to sharp climb until the vehi- operate the clutch smoothly. assess as complete failure of cle in front has reached its peak. braking for the first time. In this This technique provides directional case, do not release the pedal stability of the vehicle even in slippery and do not press it many times, road sections and, moreover, pro- as these actions only increase the vides fuel economy, increases service braking distance, and press the life of the tires and brake linings. pedal to get the maximum possi- If with properly operating suspen- ble braking effect. sions, adjusted installation angles of When stopped or parked uphill the front wheels and normal air pres- and downhill apply the parking brake sure in the tires while braking the and, accordingly, the first or reverse vehicle moves away and you have to gear in the gearbox. turn in the steering wheel to keep the For the brake pads not to be direction of driving, it is necessary to frozen to the drums after driving on inspect the service brakes at any wet roads at low temperatures, do certified SSNE. not leave the vehicle in an open area

7 Р.Э.-21920, англ. яз. 97 with the parking brake on, if not dry modes of braking and even in case of switching on the ignition, it means the brakes by smooth braking when failure of the main function of the ABS a failure of ABS function. In this driving to the parking lot. provides the optimal ratio of braking case, the operation of hydraulic When parking the vehicle during a force to front and rear wheels. brake drive is not broken. If the snowfall it is recommended to depress ABS alarm and the «brake failure» the wiper arms from the windshield to ATTENTION! alarm flash on at the same time, prevent freezing of the blades. To avoid limiting ABS efficiency expect for the self-test mode do not install the tires of different when switching on the ignition, Warning size on the vehicle. they mean a failure of all ABS Do not switch off the ignition functions and electronic brake when driving! Engine shutdown In case of emergency braking as force distribution. In this case, sharply increases the force that quickly as possible and with maxi- while braking there may be pre- must be applied to the brake mum force press the brake pedal and mature locking of the rear wheels pedal to brake the vehicle. hold it until the vehicle stops. If you and dangerous skidding of the change the direction of driving while vehicle. In both cases, the trouble Anti-lock braking system (ABS) braking hold the brake pedal. should be shot at any certified SSNE as quickly as possible. Vehicles are equipped with anti- Warning lock braking system (ABS) which Pump braking (releasing and Electronic Stability Control prevents locking of wheels during repressing the brake pedal) on System braking, thereby maintaining the ABS vehicles increases the brak- specified path of movement and abil- ing distance. In the design variant vehicles ity to adjust it during braking by turn- are equipped with electronic stability ing the steering wheel, as well as Braking with the ABS starts at a control system (ESC system) that in minimum braking distance in smooth speed of more than 8 km / h and it is all road conditions when the vehicle and hard surface. However, braking accompanied by a slight surging of deviates from the path of motion set on a road with rough or loose surface the brake pedal and the noise of the by the driver (drift or skid) automati- (gravel, sand, unrolled snow) may ABS actuators. The ABS stops oper- cally brakes one or more wheels and, cause increase of the braking dis- ating when the vehicle speed is if necessary, reduces the engine tance compared with braking in the reduced to 3 km/h. torque, thus offsetting the deviation same conditions with locked wheels. and maintaining stability and han- ABS also performs an additional Warning dling of the vehicle. function of the electronic brake force If the ABS alarm flashes on, The ESC system also serves as the distribution, which in all normal except for self-test mode when ABS, electronic brake force distribu- 98 tion and performs the antiskid func- HHC triggering is accompanied by tion that optimizes wheel slipping specific noise of actuators. when starting off and picking up due HHC doesn’t work when using the to snubbing the wheels and, if neces- parking brake or ESC malfunction. sary, reducing the engine torque. Warning Auxiliary braking system Actuating the ESC system, Vehicles with the ABS or the ESC accompanied by flashing the ESC are equipped with the vacuum boost- alarm, indicates that limit of tire er with an auxiliary braking system, Fig. 47. Towing eyes gridding has been reached. To which according to the high speed of avoid losing control of the vehicle pedal pressing recognizes the need you have to adapt for the real road for emergency braking and automat- is running. Therefore, when tow- conditions. ically provides maximum braking ing the vehicle with the engine off performance as long as the brake you should press the brake pedal Function HHC pedal is depressed. much stronger when braking. (in the design variant) Power steering does not work with the engine off (disabled), so VEHICLE TOWING ESP system (optional) is equipped that the efforts on the steering wheel will increase significantly. with function to prevent the car from To tow the vehicle attach the tow- rolling down when starting movement ing rope only to the front or rear tow- forward and reverse uphill (HHC – hill ing eyes (Fig. 47). hold control). Before towing, insert the key into When stopping uphill with a slope the ignition switch to position I. Ob- more than 4% hold brake pedal with serve traffic rules when towing. sufficient force for ensuring the car When towing, make sure that the immobility. When brake pedal relea- towing rope is drawn. Towing the ve- sed and accelerator pedal depressed hicle must be carried out smoothly, the HHC function keeps the pressure without jerks and sharp turns. in brake hydraulic drive till the start moment, but for no more than 2 sec- ATTENTION! onds that prevent cars from rolling The vacuum booster performs down. its function only when the engine 7* 99 DEFENSIVE PARKING SYSTEM ATTENTION! Parking system is an auxiliary In the design variant vehicles system that helps the driver to are equipped with the parktronic judge the distance to the detect- defensive parking system. Due to ed obstacle. this system you may avoid minor accidents that involve material costs. Backing run is considered to be a Parking sensors (Fig. 48) will help manoeuvre of higher risk. The driver, you to detect dangerous obstacle, in accordance with the requirements invisible from inside the vehicle. of the «Road rules» must ensure the Any obstacle behind the vehicle is safety of the maneuver before start- detected with the system by ultra- ing it and during driving. For this, be sonic sensors operating on the prin- Fig. 48. Parking sensors sure to monitor the situation behind ciple of echolocation. The system is the vehicle by the side mirrors and designed to warn the driver of the rear view mirror. approaching to the obstacle when mittent high alarm, the frequency of The parking system includes: reversing. Warning the driver of which increases when approaching – control unit with diagnostic approaching to the obstacle and to the obstacle and which gets inter- function that is installed into the lug- informing about the distance to the mittent at a distance between the gage compartment; obstacle is carried out with the audi- – three ultrasonic sensors bumper and the obstacle of about ble warning device. installed to the rear bumper; With the ignition and reverse gear 40 cm. – alarm sounder mounted on a on the system comes into operation Important Note: bracket with the control unit. automatically, with a bleep. If the It should be borne in mind that Parking system operation and obstacle is in the detection zone, the complete stop of the vehicle will take maintenance features: system informs the driver of the some time, depending on the reac- 1. After actuating the system it has a beep, then the control unit car- obstacle by intermittent or continu- tion of the driver, weather conditions, road conditions, braking system fea- ries out due diligence in order to ous horn, depending on the distance detect faulty sensors or other sys- to the obstacle, thus the vehicle can tures, vehicle inertia, therefore, when tem malfunctions. move in reverse or stand. actuating the parking system the If there was detected a faulty sen- When approaching to the obsta- driver is obliged to minimize the sor or other failure of the system, cle, starting from a distance of about speed and stop the vehicle at inter- after the switch signal a continuous 100 cm, the system gives an inter- mittent alarm. low chime arises for 3 seconds, then: 100 – if the left sensor is faulty (in the terminals of which are near the AUTOMATIC TRANSMISSION direction of travel), the system indi- left rear lamp. DRIVING FEATURES cates a faulty sensor with a low Note. Tow hitch fitted to the vehicle chime; Thanks to the installation of four- – if the main sensor is faulty the must have removable towing bracket, as system indicates a faulty sensor with the system determines the distance from speed automatic transmission on the bumper to the obstacle. two low chimes; your vehicle you can choose com- – if the right sensor is faulty (in 4. To prevent misoperation of the fort, fully automatic transmission; or, direction of travel), the system indi- sensors must be kept clean of snow, in extreme driving conditions, cates a faulty sensor with three low ice and mud. When cleaning the sen- change to lower (second, or first) chimes; sors do not use hard or sharp gear. – if the control unit is faulty, the objects. The sensors must be pro- The left foot is not used when driv- system gives a low chime for about 2 tected against impact. seconds. ing, except for exceptional cases of 5. Replacement of faulty sys- starting off on harp hill and descent, After alarming a fault the system is tem components is carried out at switched off. any certified SSNE. which are mentioned below. 2. Note that because of ultrasonic waves' propagation features, the Engine start system does not detect dangerous obstacles which diffuse or absorb With thumb of the right hand press ultrasonic waves. They are very low, lock button 1 (Fig. 40a) and move the thin, pointed objects, down-filled gear-change lever to position Р or N. clothes, soft snow, etc. Switch on the ignition and start up It is necessary to use other means the engine. of control over the situation behind Press the brake pedal and, press- the vehicle when approaching to obstacles such as «ramp» because ing lock button 1, move the gear- of geometric features of these change lever from position Р to posi- obstacles. tion R or D (depending on the 3. When driving with a trailer to desired direction to start driving). In disconnect the parking system, you this case, your foot should be on the need to interconnect the pads with brake pedal, the accelerator pedal two wires: black and blue and black, must be released. 101 Warning matically switched to lower gear to ATTENTION! If it is necessary to carry out be selected depending on the cur- Long wheel slip when starting the work on the vehicle with the rent speed of the vehicle and press off or picking up could cause seri- engine running, set the parking intensity. The vehicle will start to ous damage to the transmission brake and move the gear-change accelerate, optimally using the and subsequent costly repairs. lever to position P. engine power. Stopping the vehicle Starting off and driving Starting off and backing run in the automatic mode After complete stop of the vehicle, On the stationary vehicle press keeping your foot on the brake Press the brake pedal and, press- the brake pedal and, pressing the pedal, move the gear-change lever ing lock button 1, move the gear- lock button 1, move the gear-change to position Р, while the gearbox will change lever to position D, at the lever to position D, at the same time be neutral, and traction wheels are same time you will feel a little push, you will feel a little push, release the mechanically locked by the trans- release the brake pedal and slowly brake pedal and slowly pressing the mission. pressing the accelerator pedal, start accelerator pedal, start driving. ATTENTION! driving. In most cases, under normal Never attempt to move the driving conditions, you will not have Starting off and driving gear-change lever to position P to use the gear-change lever: the on slippery road while driving. This will lead to gear change will be carried out auto- serious mechanical damage and matically at the right time and at the On slippery roads and roads, loss of vehicle handling. optimum speed of the engine shaft, pavement of which does not provide as automation takes into account firm wheel gripping, to avoid wheel Driving in economy mode vehicle load, cross-section of road spin and power loss, you should start and driving style you have selected. off pressing the accelerator pedal in Button «Overdrive» O/D (ON- To give desired speed of the vehi- a careful, slow manner. OFF) is located on the decorated cle, for example, when overtaking, board of the lever. you need to press the accelerator Warning ON – economy driving mode on- pedal. This will increase engine Sudden press of the accelera- position (overdrive gear). It is speed. If the press is intense tor pedal may result in loss of grip switched on with button O/D, when enough, the gearbox will be auto- and even drift of the vehicle. the gear-change lever is in position 102 D, if necessary, to drive in economy Short stop If short stop on the grade is nec- mode in country. Overdrive gear will essary (drive control in position D) not be turned on when the engine At short stop, for example, at traf- hold on the vehicle with the engine has not been warmed up to operat- fic lights, it is not necessarily to move torque or apply the parking brake. ing temperature. to position N and, especially, to posi- tion P. It is enough to hold on the OFF – economy driving mode off- Starting off the vehicle in reverse position. Overdrive off indicator is vehicle with the brake pedal. The engine will run at idle. gear on the descent located in the instrument cluster. This position is used when driving on Parking In the vehicle you must set the long and flat grades where engine parking brake and gear-change lever braking and quick and dynamic driv- The vehicle should be fully to position Р. ing are necessary. stopped. Use the parking brake and For example, when driving at low then put the gear-change lever to Press the brake pedal, start up the speed or overcoming low grades the park position Р. With this order of engine. Change the gear-change gearbox can be cyclically switched to operations, especially on grades, the lever to position R, after some time overdrive and back. You can feel little locking mechanism will not be too transmission will come to operation, bumps when the gearbox changes loaded and then it will be easily to and the vehicle will be held on a the gears. In this case, press button change the lever from this position. grade, releasing the parking brake, O/D to switch off the overdrive gear press the accelerator pedal, start Starting upgrading (position – OFF). driving. The vehicle should smoothly When driving conditions are On the vehicle you must set the start moving without rolling. changed, press button O/D to switch parking brake and gear-change lever Warning on the overdrive gear ON. Overdrive to position Р. off indicator in the instrument cluster Press the brake pedal, start up the On high grade when driving will go off. engine. Move the gear-change lever forward (the gear-change lever in ATTENTION! to position D, after a while transmis- position D) and on rapid descent sion will come to operation, and the in reverse (the gear-change lever It is not recommended to drive vehicle will be held on a grade, in position R) efficiency of the at high speed on roads in subur- releasing the parking brake, press ban areas for a long time with the the accelerator pedal, start driving. engine torque transmitted to the overdrive off (position – OFF), as The vehicle should smoothly start wheels will not be enough, that's this increases fuel consumption. moving without rolling. why you will be able to hold on the 103 vehicle with the service or parking Unlocking the gear-change port of the leading wheels or by the brake. Conversely, on high grade lever in the gearbox method of complete loading of the when driving in reverse (the gear- vehicle to a vehicle carrier with a change lever in position R) and on When the storage battery is dis- platform. charged the gear-change lever can- rapid descent when driving for- not be moved from position Р, even if ATTENTION! ward (the gear-change lever in press lock button 1 with the brake It is prohibited to tow the vehi- position D) the torque transmitted pedal pressed. cle equipped with the automatic to the wheels would be redun- In this case, to unlock the gear- transmission, with the support of dant, and the use of the service or change lever shift down the white front or all four wheels to the road parking brake is necessary. unlock button, located under the surface, as this may cause seri- decorative cover of the lever on the ous damage to the transmission Emergency mode actuator drive housing to the right of and subsequent costly repairs. the lever. of automatic transmission By way of exception you may tow Now you can switch the gear- the vehicle with the support of all change lever from position P to posi- the wheels to the road surface if Automatic transmission can be tion N. the transmission is in order and changed to emergency operation In order to ensure safety during mode (in this case the third gear is the operation, set the parking brake the control drive is in position N switched on) if the vehicle moves in and hold the brake pedal. with a maximum speed of 20 km/h very difficult conditions. For exam- If you face problems when chang- at a distance of not more than 20 ple, when intensive slipping alter- ing the gear-change lever of the km. If necessary tow the vehicle nates with emergency braking. This automatic transmission from position with raised rear wheels, the front wheels must be supported by a can happen even with a fully opera- P (parking), following all these oper- special trolley. tional system of the automatic trans- ations, refer to the certified SSNE. mission. In this case, switch off the Recommended methods ignition and wait for 3 seconds. Then of towing a vehicle with switch the ignition on: the vehicle an automatic transmission must start to operate properly. If the automatic transmission con- The manufacturer recommends to tinues to be in the emergency mode, tow the vehicle equipped with the contact a certified SSNE. automatic transmission, without sup- 104 TECHNICAL ENGINE MAINTENANCE LUBRICATION SYSTEM AND OPERATING REPAIR OF THE VEHICLE

Fig. 49b. Checking the oil level in the 16-valve engine case

This section provides a brief de- Fig. 49а. Checking the oil level in the 8-valve engine case scription of some kinds of works on technical maintenance and operat- ing repair of the vehicle. With the engine running, engine horizontal surface. The level should Full technique of maintenance, re- oil consumption is normal. The value be between MIN or MAX oil level pair and scrappage of vehicles can of oil consumption depends on driv- indicator marks 1 (Fig. 49а) or be provided by certified SSNEs, ing style of the vehicle and it is between the upper and lower edges which are equipped with special determined with engine load and of the corrugated surface of indica- equipment and instrument. Mainte- engine shaft speed. In the initial tor 1 (Fig. 49b) depending on the nance and repair of your vehicle operating period the oil consump- engine model. If necessary, top up must be carried out in strict compli- tion is slightly increased. the oil through the filler, closed by ance with the requirements of the Therefore, you should regularly, plug 2. vehicle log book for your vehicle. especially before long journeys, After topping up the oil level All operations in the engine com- check the oil level in the engine should be checked no sooner than partment must be carried out after case. in three minutes to give topped up opening the bonnet (see the section The oil level is checked in a cold portion of the oil time to drain into «Bonnet»). dead engine when the vehicle is on the engine case. To measure the oil 105 level properly you should insert indi- GEARBOX cator 1 to its location hole until it stops. Manual transmission ATTENTION! Check the oil level in the mecha- Do not exceed the oil level in nical transmission in the cooled the engine case above MAX mark gearbox. The oil level should be at of oil level indicator 1. the lower edge of inspection hole 1 Otherwise, the oil through the en- (Fig. 50). Top up the oil (see Annex gine case ventilation system will 1) in small portions through inspec- enter the combustion chamber and tion hole 1. together with exhaust gases will be Drain the used oil through the emitted into the atmosphere, and oil hole closed with plug 2. Fig. 50. Checking the oil level combustion products may result in a in the manual transmission failure of the catalytic converter. Automatic transmission

AIR INTAKE The working fluid in the automatic transmission is filled by the manu- When driving in areas with high facturer and does not require Energy Corporation). The use of dust (dirt roads, construction zones, replacement during operation of other fluid types will lead to a fail- etc.) it is recommended to change the vehicle. The exception is repla- ure of the automatic transmis- the air filter element of the engine cement of the working fluid in the sion and reducing its service life; twice more often than specified in repair of the automatic transmission. it also can cause malfunctions, the vehicle log book. Checking the level and replacing removal of which is not covered the working fluid (if necessary) are by the warranty of the manufac- recommended to carry out at any turer. certified SSNE. Do not pour the oil over the maximum permissible level, it ATTENTION! can lead to splashes of oil Only use Genuine EJ-1ATF through the breather that can fluid for automatic transmissions then ignite the oil, when it drops (supplier JX Nippon Oil and onto hot engine parts. 106 ENGINE COOLING SYSTEM BRAKING SYSTEM

Check the coolant level in expan- sion chamber 1 (Fig. 51) only in the cold engine. The coolant level must be between MIN and MAX marks applied on the housing of the expan- sion chamber, which is made of translucent material providing visual control of the flied level. In the oper- ation of the vehicle the coolant level in the expansion chamber can be lowered. Top up the coolant (see Fig. 51. Expension chamber Fig. 52. Fluid reservoir for brake Annex 1) through the hole closed hydraulic system with plug 2. After topping up the fluid the plug must be tightly turned up, as In cases when the coolant level is The brake fluid level in reservoir 3 the expansion chamber with the constantly dropping and you often (Fig. 52) installed on the brake mas- engine running and warmed up is have to refill the coolant, refer to any ter cylinder visually check according under pressure. certified SSNE. to the marks on the housing of the Warning reservoir, made of translucent plas- tic. When you remove plug 2, sensor To avoid burns, you should 2 of the emergency brake fluid level open the plug of the expansion chamber for topping up the and new brake shoe linings the brake coolant only in the cold engine. fluid level must be on MAX. After installing plug 2 and sensor 1 the brake fluid level should be at the lower edge of the filler of the reser- voir. If the hydraulic brake system is in good repair, reducing the fluid level in the reservoir may be due to wear of 107 brake shoe linings. Fluid level lower- WINDOW WASHER SYSTEM ing to MIN mark indirectly indicates their extreme wear. In this case it is The windshield and rear window necessary to check the state of lin- washer reservoir (Fig. 53) should ings, and it is not necessary to top up always be filled with window-washer the brake fluid in the reservoir, fluid, top up the fluid (see Annex 1) because when you install new pads through the hole closed with the the fluid level will increase to normal. plug. «Brake failure» alarm lights up In warmer months it is allowed to when the brake fluid level in the res- use clear water and at sub-zero tem- ervoir drops below MIN mark that perature use only special window- Fig. 53. Washer reservoir with partially worn or new brake shoe washer fluid (see Annex 1). linings indicates loss of system integrity and fluid leakage. Top up ATTENTION! fluid (see Annex 1) in this case only At an ambient temperature of locking the blade on the arm (by after restoring system integrity at any 0 0C and below it is not allowed to pressing the adapter between the certified SSNE. pour water into the windshield blade and the arm), remove the While checking brake fluid level in and rear window washer reservoir blade from the arm. the reservoir, do not forget to check without special washer fluids The installation of the new blade the brake fluid emergency level sen- because of possible damage to sor for normal operation, by pressing should be carried out in reverse or- the washer pumps. down the centre of protective sensor der. cap 1–with the ignition on the «brake Replacing wiper blades ATTENTION! failure» alarm should light red in the 1. To ensure good visibility instrument cluster. To replace the wiper blades per- through the windshield keep the form the following steps: wiper blades in good condition. – pull up the wiper arm from the 2. To avoid deformation of the windshield; blades they should be regularly – turn the blade on the axis of ro- cleaned with fluid of the washer tation, placing it approximately per- reservoir. If windows and wiper pendicular to the wiper arm after un- blades are heavily dirty, for 108 example, with remains of insects ACCUMULATOR BATTERY (adhering to the window), road salt, elements of the road surface To follow the level of electrolyte in you should clean outer face of the battery; electrolyte level must be window and blade with a soft between marks MIN and МАХ (fig. cloth using special detergents. 54), marked on semitransparent After cleaning, wash the window cage of battery. The operation with and wiper blades with water. battery electrolyte level below MIN 3. Given that the windshield line is forbidden. If there are no wipers are for the traffic safety marks MIN and МАХ on the cage of system, it is recommended to re- battery or the cage is non-transpar- place the wiper blades at con- ent, the electrolyte level should be stant use of the vehicle every six 10-15 mm above the top of separa- months. tors. Fig. 54. Accumulator battery Caution Due to the fact that electrolyte is corrosive fluid, it’s dangerous – «eyehole» black – battery needs for your health and vehicle parts, recharging; so we recommend making main- – «eyehole» white – electrolyte tenance of accumulator battery level is below normal. on certified auto service stations. In the design variant in the absence of eyehole, the battery level To avoid deep discharge of bat- can be determined by voltage at the tery, it’s necessary to charge it in terminals of battery: battery voltage proper time. (no load) should not be less than If accumulator battery has density 12,6 В (at 25°С, this corresponds to indicator and electrolyte level indica- 75% charge level). tor («eyehole»), the status of battery To check accumulator battery can be determined by its color: charge level regularly, if: – «eyehole» green – level and l You use vehicle for short urban density of electrolyte is normal; trips mainly. 109 l You use vehicle at low ambient tion of the terminals and clamps, as TIRES AND WHEELS temperatures. When the temperature well as loose connections cause arc- decreases, battery capacity decrea- ing in the place of unreliable contact Periodically check tire air pres- ses. In winter, use only electrical that may cause to electrical failures. sure with pressure gage. Operation appliances that are really necessary. Also, do not check the efficiency of of tires with pressure, different from l You’ve connected to vehicle generator, when the engine is run- the recommended (see Table 2) leads to their premature wear, as electrical network some additional ning by removing of clips from accu- mulator battery. well as to stability reduction and regular consumers, for example, control restriction of the vehicle. If When installing accumulator bat- watches and other accessories that there is constant air pressure in tires, tery on vehicle, the wiring harness are installed with after-sales service. check for air leakage through the l Your vehicle is a long time in the clamps should be connected in valve inside. In the case of air leak- parking lot; in this case, for better accordance with correct polarity (the age, tighten the valve inside, and if safety, we recommend you discon- size of positive terminal harness and that does not work, replace it with a nect the battery from the wiring of lead battery is bigger than negative). new one. the car, removing the terminal. At While charging the battery with an If the pressure drops with the op- very low temperatures below freez- external charger directly to the vehi- erative valve inside, then you need to ing, below (-30° C), we recommend cle, be sure to disconnect the battery repair the tire. to remove the battery from the vehi- from the wiring of the vehicle. Tires Pressure cle and to store it in a warm room. Мonitoring System ATTENTION! Car is equipped by the tire pres- Do not remove clamps from sure monitoring system (TPMS). accumulator battery terminals The system consists of four sen- when the ignition is on, as it may sors installed in car wheels, control cause to errors in ECU con- unit being the receiver of the signal troller’s work or to lead to electri- and indicator in cluster. The replace- cal failures. ment of the sensors and system learning are to be done only in the Clamps and battery clips should authorized sale and service network. be clean and their connection should Lighting of yellow TPMS indi- be reliable. Remember, that oxida- cator shows the critical decrease of 110 the pressure in one or several tires. detect or indicate low pressure in Continuation of driving with such a the tires as it is aimed for. The low pressure in the tires could lead to failure in TPMS system could be their overheating and mechanical caused by different reasons destruction. Exploitation of the tires including the installation or with the pressure lower than norma- replacement of tires or wheels. tive results in worsening of car ride Always check the TPMS failure and handling, braking performance indication after the replacement as well as impacts the increase in fuel of one or several tires, wheels or consumption and reduces tire life. Fig. 55. Rotation pattern the place of their installation in If indicator turned on, it is neces- the car to be sure in operation sary to stop the car following all pre- Pay attention that the applica- ability of the TPMS system. cautions, check the tire status and tion of TPMS system does not put their pressure level to the normal mean that there is no need for Replacing wheels status. Tire pumping shall be done correct servicing of tires and with ignition on with the pressure maintaining the appropriate pres- To replace wheels: 2,2–2,3 atm after this the indicator sure in them even if the decrease – put the vehicle on a level surface shall turn off. If the indicator remains of the level is not enough to turn and brake it with the parking brake on, it is necessary to recheck and the TPMS indicator on. and the first gear on; pump other car tires till the indicator The indicator is also used – take the spare tire and tools; turns off. After the indicator turns off – remove the wheel cover (in the it is necessary to lower the tire pres- to alarm about failure in the TPMS design variant); sure to the values recommended by system. – loosen wheel bolts for one turn the car manufacturer. If it is not pos- When the system detects fail- ure the indicator twinkling 5 times with combination wrench 2 (Fig. 56); sible to secure the appropriate tire – set lifting jack 1 so that the pressure it is necessary to replace with the frequency Hertz then continues permanent lighting. recess in the jacking pad is inserted the disabled wheel by spare one. to the edge of the sill closer to the Attention! Spare wheel is not The indication on the failure in wheel that is replaced, and the foot equipped by TPMS sensor and in the TPMS system is done each of the jack is just under it. To make it case of its usage the indicator will tome when ignition turns on till easier to find the right place to set be on, it is necessary to drive the failure exists. When the fail- the jack the sills of the vehicle have carefully till the elimination of ure indicator turned on, the sys- special holes for the lifting jack. By malfunction. tem probably will not be able to rotating the jack handle (position I) 111 Table 2 Acceptable typical sizes of tires, wheels and air pressure in tires Air pressure in tires, front / rear, Tire dimensions Wheel dimensions 2 Modification and version MPa (kgf / cm ) with load and of the vehicle speed indexes* rim width offset partial full (in inches) (ЕТ)**, mm load*** load**** Set by manufacturer

1 2192 («hatch- «Standard» 175/65R14 82H 5 /2 J back» body), «Norm» 185/60R14 82H 0,2 /0,2 0,2/0,22 1 2194 («station 175/65R14 82H 5 /2 J, 6J 35 (2,0/2,0) (2,0/2,2) wagon» body) «Luxe» 185/60R14 82H 185/55R15 82V 2194 Cross (body «station wagon») 195/55R15 85Н 6J 33 Fig. 56. Lifting the vehicle when Allowed to set while operating replacing the wheels 2192 («hatch- 175/65R14 82T,H 1 back» body), All modifica- 185/60R14 82T,H 5J, 5 /2 J, 6J 35 0,2/0,2 0,2/0,22 2194 («station tions 185/55R15 82T,H,V (2,0/2,0) (2,0/2,2) wagon» body) with screw 1 (Fig. 56) and cover the 1 2194 Cross (body «station wagon») 195/55R15 85T,H,V 5 /2 J, 6J 33 compartment with the carpet. After covering the first thousand * Speed indexes: Т – up to 190 km/h, Н – up to 210 km/h, V – up to 240 km/h. of kilometres check wheel bolt tight- Load indexes: 82–475 kg, 85–515 kg. ening and, if necessary, tighten; ** Offset (ЕТ) – distance from the joint face of the disc to the midpoint of the rim. *** Partial load – no more than 3 adults in the vehicle without load in the trunk. Carry out the same operation at **** Full load – more than 3 adults or 3 adults and load of 50 kg in the trunk. each installation of new wheels on Allowed to use winter tires (M + S) of the above dimensions and index Q with the corresponding restriction of the maximum vehicle speed (up to 160 km/h). the vehicle. In the design variant for vehi- cles with alloy wheels there is used lift the wheel above the support sur- turn the bolts and tighten them even- built-up steel wheel. face to a height of 50-60 mm. If the ly crosswise; distance to the support surface does – lower the vehicle and remove not provide a complete turn of the the lifting jack. Tighten the screws handle, then rotate the handle with small radius (position II); and check the tire pressure. – unscrew the bolts and remove When finished lay the replaced wheel the wheel. Install the spare wheel, in the luggage compartment, secure it 112 Fig. 57. Packing the spare wheel Fig. 58. Replacing the remote control battery

REMOTE CONTROL BATTERY – remove screw 2 (Fig. 58) from FUSE PLUG’S REPLACEMENT REPLACEMENT the side of the case, opposite to the control buttons; When replacing fuse plugs and The remote control contains a – using a flat screwdriver discon- relay, use only new fuses the types of which are recommended for your lithium battery of CR2032 type, the nect the halves of the case by insert- ing the screwdriver into spline 1; vehicle, and only of those manufac- initial voltage of which is 3 V. If the turers who have the conclusion of – remove the board from the case; voltage of the remote control is nor- JSC «AVTOVAZ» and marking in mal, then every time you press any – replace the battery 3 with the accordance with Tables 3-7. new one according to the polarity; button on the remote control console – insert the board into the case; ATTENTION! its indicator will light with short flash. – lock the halves of the case and If you press any button on the remote Do not use fuses that differ in tighten screw 2. amperage rating from those rec- control console its indicator lights ommended in Table 3–7. This can with two short flashes or does not ATTENTION! lead to a failure of the vehicle's light at all, replace the battery with a It is not allowed to use a bat- electrical equipment or fire haz- new one. To do this, follow these tery of other type in the remote ard. steps: control.

8 Р.Э.-21920, англ. яз. 113 Table 3 Electrical circuits protected by fuse plugs, placed at the fuse and relay block of interior the «norm», «luxe»* version vehicle

Fuse No Current force Protected circuit

F1 15А Ignition coil Fuse injectors Engine management system control unit F2 30 А Body electronics central box Driver’s door module F3 15А Automatic transmission controller Automatic transmission control linkage F4 15А Air bag system controller F5 7,5А 15 instruments terminals F6 7,5А Reverse light Automatic transmission controller F7 7,5А Canister purge solenoid Mass airflow sensor/pressure sensor Cam phaser Oxygen sensor F8 F9 5А Right board tail lights F10 5А Left board tail lights Lighted instruments and keys Number-plate light Luggage compartment light Side glove box light F11 5А Rear fog lights F12 10А Dipped beam headlight , RH Headlight electric adjuster power, RH F13 10А Dipped beam headlight, LH Headlight electric adjuster power, LH

114 Extension of table 3

Fuse No Current force Protected circuit

F14 F15 10А Rear window washer Rear window wiper F16 5А Driver’s door module F17 F18 F19 F20 F21 10А Main beam, headlight RH F22 10А Main beam, headlight LH F23 10А Right fog light F24 10А Left fog light F25 15А Front seats heating F26 5А Anti-lock braking system control unit F27 15А Cigarette lighter F28 15А Fuel pump F29 20А Windscreen washer Body electronics central box F30 F31 7,5А A/C compressor clutch Climate unit automatic control system controller F32 7,5А Brake lights Interior light F33 25А Anti-lock braking system control unit F34 5А Instrument cluster Data link connector F35 10А Body electronics central box F36 10А Horn F37 10А Receiver/Multimedia system

8* 115 Extension of table 3

Fuse No Current force Protected circuit

F38 F39 F40 F41 F42 F43 50А Automated transmission controller F44 30А Heater electric fan Climate unit automatic control system controller F45 25А Rear seat heating F46

* The specified set of fuses for high line version «luxe» (depending on options’ set some fuses from this set can be not used in other versions).

Table 4 Electrical circuits protected by fuse plugs, placed at the fuse and relay block of interior the «standard» version vehicle

Fuse No Current force Protected circuit

F1 15А Ignition coil Fuse injector Engine management system control unit F2 10 А Daytime running lights F3 10А Alarm signaling F4 15А Air bag system control unit F5 7,5А 15 instruments terminals F6 7,5А Reverse light F7 7,5А Canister purge solenoid

116 Extension of table 4

Fuse No Current force Protected circuit

F7 7,5А Mass airflow sensor/pressure sensor Oxygen sensor F8 7,5А Turn indicators F9 5А Right board tail lights F10 5А Left board tail lights Lighted instruments and keys Number-plate light Luggage compartment light Side glove box light F11 5А Rear fog lights F12 10А Dipped beam headlight , RH Headlight electric adjuster power, RH F13 10А Dipped beam headlight, LH Headlight electric adjuster power, LH F14 F15 10А Rear window washer Rear window wiper F16 F17 F18 F19 20А Door locking F20 F21 10А Main beam, headlight RH F22 10А Main beam, headlight LH F23 F24 F25 15А Front seats heating F26 5А Anti-lock braking system control unit F27 15А Cigarette lighter F28 15А Fuel pump

117 Extension of table 4

Fuse No Current force Protected circuit

F29 20А Windscreen washer F30 F31 7,5А A/C compressor clutch Climate unit automatic control sustem controller F32 7,5А Brake lights Interior light F33 25А Anti-lock braking system control unit F34 5А Instrument cluster Data link connector F35 10A Body electronics central box F36 10А Horn F37 10А Receiver/Multimedia system F38 F39 F40 F41 F42 F43 50А Automated transmission controller F44 30А Heater electric fan Climate unit automatic control system controller F45 25А Rear seat heating F46

118 Table 5 Relay, placed at the fuse and relay block of interior the «norm» and «luxe»* version vehicle

Relay No Relay Switched circuit output capacity K1 50А Discharging relay K2 30А Starter additional relay K3 40А Cooler electric fan relay K4 30А Cooler electric fan relay K5 30А A/C compressor clutch relay K6 30А Rear window heating relay K7 20А Main beam headlight relay K8 20А Horn relay K9 20А Dripped beam headlight relay K10 20A Reverse light relay (in version with automatic gearbox) K11 20А EMS main relay K12 20А Fuel pump relay K13 20А Seats heating relay K14 70А Windscreen heating relay

* The specified set of fuses for high line version «luxe» (depending on options’ set some fuses from this set can be not used in other versions).

119 Table 6 Relay, placed at the fuse and relay block of interior the «standard» version vehicle

Relay No Relay Switched circuit output capacity K1 50А Discharging relay K2 30А Starter additional relay K3 30А Wiper relay K4 30А Cooler electric fan relay K5 30А Turn indicators relay K6 30А Power window relay K7 20А Main beam headlight relay K8 20А Horn relay K9 20А Dripped beam headlight relay K10 K11 20А EMS main relay K12 20А Fuel pump relay K13 20А Seats heating relay K14 30А Alarm singling relay K15 30А Rear window heating relay K16 30А Alarm signaling additional relay

Table 7 Electrical circuits protected by the fuses located within the fuse block of the engine compartment *

Fuse No Nominal Protected circuit

FF1 50A Windshield defroster FF2 60A Generator FF3 60A Generator FF4 40A (with level of equipment Radiator electric cooling fan w/o climate control system – 30А) FF5 50A Electromechanical power steering FF6 40A ABS control unit

* Set of fuses is defined for version «luxe». In other versions some fuses of the set cannot be used. 120 Fig. 59a. Fuse block and salon relay

121 Battery Fig. 59b. Opening the fuse box Fuse block (without cover)

Fig. 60. Fuse block of the engine compartment

To access the fuse box with fuse variant) and for binding of the wires. plugs (Fig. 59b) pull the upper left In case of repeated failure of the edge of the cover and release the left fuse to spot and eliminate the cause cut-off point, then release the right of its melting, refer to certified any cut-off point and open the fuse box SSNE. cover. Current force, for which the fuse is designed, is indicated on its face, and the fuse number is indicated on the fuse box housing. When reinstalling the fuse box cover, check wire terminal block for secure connection to the tailgate lock actuator switch (in the design 122 BULB REPLACEMENT

For normal operation of the light- ing and light warning system, use the bulbs as defined in Annex 2. ATTENTION! Before replacing any bulb, make sure that the appropriate signalling and lighting unit is turned off.

Headlight unit Fig. 61. Headlight unit

Dipped light bulb replacement: – open the bonnet (see the sec- Main beam bulb replacement: Replacement of daytime run- tion «Bonnet»); – open the bonnet (see the sec- ning light and tail lights: tion «Bonnet»); – open the bonnet (see the sec- – remove protective rubber cover – remove protective rubber cover 1; tion «Bonnet»); 3 (Fig. 61); – disconnect the terminal block – turn bulb socket 2 counter- – disconnect the terminal block from the bulb; clockwise until it stops; with the wires from the bulb; – remove the spring lock, by click- – remove the socket with the bulb – remove spring lock 5, by clicking ing on it; from the headlight housing; on it; – take out the bulb holding its – remove the bulb from the socket. – take out bulb 6 holding its base. base. The installation of the new bulb The installation of the new bulb The installation of the new bulb should be carried out in reverse or- should be carried out in reverse or- should be carried out in reverse der. der. Do not touch the bulb! Replacing order. Do not touch the bulb! Direction indicator bulb re- the bulb should be carried out in cot- Replacing the bulb should be carried placement: ton gloves. After installing the new out in cotton gloves. After installing – open the bonnet (see the sec- dipped light bulb, check protective the new main light bulb, check pro- tion «Bonnet»); rubber cover 3 for close fitting to the tective rubber cover 1 for close fitting – turn bulb socket 4 on yourself housing of the headlight unit. to the housing of the headlight unit. until it stops; 123 – remove the socket with the bulb from the headlight housing; – turn the bulb counterclockwise until it stops, by pressing it; – remove the bulb from the socket. The installation of the new bulb should be carried out in reverse or- der.

Rear light

Replacing the bulbs in the rear light for the «hatchback» vehicle Fig. 62а. Rear light for Fig. 62b. Rear light for (Fig. 62а): «hatchback» vehicle «station wagon» vehicle – open the tailgate (see the sec- tion «Tailgate»); – loosen two rear light bolts from Replacing the bulbs in the rear and remove the socket with a faulty the side of the tailgate; light for the «station wagon» vehi- bulb; – applying force, pull the rear light cle (Fig. 62b): – turn the socket with the bulb that and take out mounting studs of the requires replacement, counter- – open the tailgate (see the sec- rear light holders; clockwise and remove it from the – pull the rear light from the body tion «Tailgate»); rear light housing; and remove the socket with a faulty – open the hatch in the side trim; – remove the bulb from the socket bulb; – disconnect terminal block 1 of slightly pressing it and turning it – remove the bulb from the socket the rear light from the vehicle wiring counter-clockwise; pressing it and turning it counter- harness; – insert a new bulb into the sock- clockwise until it stops. et, pressing and turning it clockwise. – remove three rear light nuts; After installing a new bulb assem- After replacing the bulb assembly bly and installation of the rear light – throw out the rear light of en- and installation of the rear light should be carried out in reverse gagement with the striker plate; should be carried out in reverse order. – pull the rear light from the body order. 124 Interior roof lighting

To replace the bulb in the interior roof light you should remove head- light glass 1 (Fig. 65) from the light frame. The roof light is held with metal retaining spring and hooks in the back of the frame seat. To re- move the roof light you should insert a flat screwdriver into the chase on Fig. 63. Direction indicator Fig. 64. Licence plate light the right side of the roof light (on the front passenger seat) and carefully pull the roof light. Depress contacts and pull out the bulb. After replacing Direction indicator Licence plate light the bulb, set the roof light hooks into the socket of the unit on the left side To replace light bulb 1 (Fig. 64) in To replace the bulb in side direc- the licence plate light you should and push the right side of the roof tion indicator 1 (Fig. 63) remove it remove the light from the vehicle. light to fix it. from the vehicle. In the socket the In the socket the light is held with light is held with spring latch and spring latch and striker plate. Insert a Interior lighting unit striker plate. Move the light in the flat screwdriver into chase on the driving direction and throw out light left side of the roof light, careful- To replace the bulb in the interior the striker plate of engagement. ly move it to the right and throw out lighting unit you should remove Turning socket 3 counterclockwise, the striker plate of engagement. head-light glass 1 (Fig. 66) with the Turning socket 3 counterclockwise, remove it and the bulb from the light flat screwdriver, inserting it into spe- remove it and the bulb from the light housing and pull bulb 2. housing and pull bulb 2. cial chases. Individual reading bulbs After replacing the bulb assembly After replacing the bulb the are removed after turning through and installation of the direction indi- assembly and installation of the 450 clockwise and counterclockwise. cator should be carried out in reverse licence plate light should be carried The unit is held in the seat by means order. out in reverse order. of latches 2. 125 Fig. 67. Luggage compartment light and side glove box light Fig. 65. Interior roof lighting

Luggage compartment light and side glove box light

To replace bulb 3 (Fig. 67) in the luggage compartment light and side glove box light you should remove the light from the sear, for this insert the screwdriver into chase 2 from the right side of the light and carefully turn it towards you. Then press latch 7, remove it out of hole 6 and remove headlight glass 1. The bulb is held with spring contacts. After replacing Fig. 66. Interior lighting unit the bulb headlight glass 1 should be placed so that its chases put into mounting whiskers 4 of the light housing 5. 126 Fog light BODY

Remove the inoperative bulb from Body is the basic and the most the fog light (Fig. 68). Turn socket 1 costly component of the vehicle. It is counterclockwise and remove it from made of advanced materials and the reflector, disconnect the terminal protected against corrosion with block from the bulb. The installation high-quality protective equipment. of the new bulb should be carried out The basis of corrosion protection in reverse order. Work on installing a lifetime is laid by the manufacturer, halogen bulb should be carried out however, paints and other protective with gloves to avoid leaving traces on and decorative coatings are subject Fig. 68. Fog light the bulb. This type of work is recom- to normal wear and ageing. The mended to perform at any certified effectiveness of corrosion protection SSNEs using the lift. and its lifetime depend on climatic To access to the fog light under – after removing the cover you will conditions, ecological environment, the front wheel arch, you must first receive access to the bulb through conditions of use, storage, proper remove the wheel and partially the hatch in the dash board; care and timeliness of preventive loosen dash board by removing six – turn the bulb counterclockwise measures. screws. Fold the dash board, remove and pull it out; Do not apply high efforts to open the burned-out light bulb from the – disconnect the terminal block or close the doors and the bonnet fog light. and replace the bulb. and control movements of them; oth- In the design variant dash The installation of the new bulb erwise, it can result in injury and/or boards of the vehicle are equipped should be carried out in reverse or- rubbing of the doors and the body, with special hatches for access to der. It is recommended to remove the for which the manufacturer is not the fog lights. If such a hatch is avail- front wheel in order to make the work responsible. able the bulb replacement procedure on bulb replacement easier. In order not to have paint coatings will be as follows: on the body and outer optical sur- – maximally turn the front wheel faces on the fixtures of the vehicle inside the arch to access to the hatch scratched, do not remove dust and cover; dirt with dry cleaning material. In – turn the hatch cover of the dash order to keep the vehicle it is neces- board counterclockwise and remove sary to wash it until the dirt dries with the cover; spray of small water pressure using a 127 soft sponge and car shampoos that form spots. In winter, after washing ATTENTION! create protective films against the the vehicle in a warm room before The manufacturer of the prod- environment influence. driving out clean the body and door ucts ensures that no signs of per- seals dry, as water droplets freezing ATTENTION! foration corrosion are on the vehi- to the paint coating may form cracks cle body for a stated term of the Do not use soda and caustic on it and the seals may freeze to the warranty. Corrosion on the body solutions, as well as sewage and body. and other parts of the vehicle dur- other solutions that are not ATTENTION! ing its operation is possible and intended for vehicle wash. Do not wash the vehicle with does not mean improper product Before washing the vehicle, clean the ignition on. quality. drain holes of doors and sills. If you notice signs of corrosion When washing the vehicle avoid (including in welded joints and ATTENTION! direct spray of water on electrical seams), as well as damage of the Due to a big choice on the mar- products, electronic devices, sen- paint coating (chips, scratches, ket of washing machines with sors and detachable joints in the scuffing) and other protective brush assemblies of different engine compartment. Check the coatings (chips and abrasion of design, vehicle wash with the use condition of protective covers of mastic and soil) you should con- of brush washing machines can detachable joints in electronic units tact the certified SSNE to take lead to loss of paint coating gloss and sensors. In case of ingress of action to avoid further corrosion and reduction of its protective moisture into the detachable joints propagation, restore and repair properties. Therefore, before blow them with compressed air and the paint and protective coatings. washing your vehicle, in advance process with waterproof product to Actions taken to prevent prop- ask the operator of a washing protect contacts against oxidation. agation of corrosion on the body machine for its design, technical During washing the vehicle thor- and other parts of the vehicle will condition of brushes and their oughly wash the hemming of the extend its service life for a long impact on the paint coating of doors, the bonnet, the boot lid, the time and save its market condi- your vehicle. welds and the joints of the engine tion. In the case of non-accept- compartment, the luggage compart- ance by you of timely measures to In summer wash your vehicle out- ment and the door openings, as prevent corrosion processes on doors in the shade. If this is not pos- accumulated dirt in these areas will the vehicle body, the manufactur- sible, then immediately wipe washed lead to damage of protective and er assumes no responsibility for surfaces dry, as water droplets dry- decorative coatings and corrosion of the further condition of the body ing in the sun on the painted surface the metal. of your vehicle. 128 To improve corrosion resistance coatings in a timely manner and body with corrosion products during of the body, closed box-shaped cav- restore damaged areas. wet with dew. Red pimple may be ities of sills, side members, cross To keep gloss of painted surfaces removed with 5% solution of oxalic members and other elements of the of the vehicle (especially for vehicles acid and detergent followed by body bottom are covered with a spe- that are stored outdoors) polish them washing with clean water. cial antirust composition. When regularly with the use of polishing Local variations in colour (spot) of operating the vehicle it is necessary pastes. These pastes close cracks the outer paint coating and local to carry out anti-corrosion treatment and voids, resulting in use of lacquer damage of the enamel coating of the of the body at certified SSNEs for the coating, that prevents corrosion body are the result of impact of first year of operation, and periodi- under the paint layer. acidic industrial emissions after their cally once a year on the technology To keep the body glossy for a long connection with moisture in the air. developed by the manufacturer. time, do not leave the vehicle in the Such effects depending on the sun for a long time, and avoid body severity level are eliminated with pol- ATTENTION! surface contact with acids, solutions ishing or repainting of the body. After anti-corrosive treatment of soda, brake fluid and gasoline. Wipe plastic parts with a damp of the body with antirust compo- In order not to have spots of gaso- cloth. Using of gasoline or solvents is sition at any certified SSNE check line on the paint coating under the prohibited, as plastic parts lose their the exhaust system (catalytic fuel tank hatch, wipe the surface with gloss. a clean cloth before and after filling. converter, main and intermediate ATTENTION! silencer) for the absence of Due to unfavourable environmen- antirust composition on these tal conditions in some areas, there When washing and cleaning parts in order to prevent possible are cases of aggressive effects of the the passenger compartment, fire hazard. individual components of the envi- avoid ingestion of water and small ronment on protective and decora- items (such as crumbs, dog hair, In the operation of the vehicle the tive coatings of the vehicle. These etc.) to electrical equipment. cover on the body bottom, as well as effects appear in the form of red the paint on the bottom of the front pimple, local change in colour of and rear wings are exposed to abra- exterior paint coating, local damage sive wear due to effects of gravel, of the body enamel coating. sand and salt. This impact results in The cause of the red pimple is wearing out of mastic and soil, as suppression on the horizontal sur- well as rusting of bare metal. face of the body fine particles of air- Regularly check the state of these borne metallic dust that sticks to the

9 Р.Э.-21920, англ. яз. 129 EXTERIOR LIGHT AND EXTERIOR Removing condensate water requi- VEHICLE STORAGE LIGHT ALARM INSTRUMENTS res no special measures. The disap- pearance of condensate water In operation, pay great attention Vehicles are equipped with lights should occur during operation of the to the conditions of storage of the vehicle. The optimal conditions for with headlight glasses that are made vehicle, and to speed up this storing the vehicle are the following: process, you should switch on of plastic. – shed, where temperature and In order not to damage the plastic appropriate lighting. humidity correspond to environmen- headlight glasses when washing, do tal parameters, there is a constant not use corrosive and abrasive movement of air and there is no cleaners or chemical dilutants. direct impact of solar radiation and To avoid blushing and scratching precipitation; never wash dried dirt from the outer – heated space (garage) with a temperature of not lower than 50С surface of the headlight glasses, in and a relative humidity of 50–70%, advance water the surface of the equipped with plenum-exhaust ven- lens properly, for cleaning use a soft tilation. cloth or sponge, do not use sharp If the heated space (garage) is objects to clean the lenses of ice. equipped with ineffective plenum- exhaust ventilation, and the vehicle is Warning operated in winter or after washing it Premature blushing of head- is placed in storage without prior dry- light glasses lead to poor lighting ing, devastating effect on protective of roadway, to distortion of light- and decorative coatings increases repeatedly. It is allowed to store the and-shade and dazzle of drivers vehicle in winter under the shed or in by oncoming vehicles. the unheated room for a long time In very moist hot or cold air, for under the following conditions: 1. Drain water from the window example, in heavy rain, when wash- washer reservoir. ing the vehicle condensate water 2. Wash your vehicle and dry its bo- may appear on the inner surfaces dy. Apply a preservative on the body. of glasses of lighting and light-sig- 3. Fully charge the battery, remo- nal instruments for a short time. ve and store it separately. 130 VEHICLE TECHNICAL SPECIFICATION

Table 8 Main parameters and characteristics of 2192 «hatchback» vehicle

Version Norm Luxe Engine model 11186 21126 21126 21126 Transmission type МКП МКП МКП АКП Number of doors 5 Number of seats, pers. 5 (first line – 2, second line – 3) Number of seats in the fully folded rear seats, pers. 2 Overall dimensions, mm Fig. 69 Layout scheme with transversely mounted engine and front-wheel drive Engine type four-stroke, spark-plug ignition Engine feed system electronically controlled fuel injection Engine ignition system electronic; static distributor Engine displacement, сm3 1596 Number of engine cylinders 4 Cylinder arrangement in the engine in-line Number of valves in engine cylinders 8 16 Nominal compression ratio in engine cylinders 10,3 11 Maximum engine power, kW (min-1), (ISO 1585) 64,0 (5100) 72,0 (5600) Maximum engine torque, N•m (min-1) 140,0 (3800) 145,0 (4000) Fuel Gasoline without lead 95 RON

9* 131 Extension of table 8

Version Norm Luxe Engine model 11186 21126 21126 21126 Unladen weight, kg: – Min, kg 1005 –Max, kg 1065 Gross Vehicle Weight Rating (GVWR), kg 1540 Road clearance at full load under the engine not less 160 case, mm Road clearance at full load under the transmission not less housing (MT/AT), mm 165 145 Maximum speed1, km/h 168 178 178 175 Acceleration time up to 100 km/h, sec 12,2 11,5 11,5 13,1 Gross trailer weight2: – without brakes, kg 450 – with brakes, kg 900 750

1 Measured by special technique. 2 Provided that the vehicle is equipped with towing hitch in accordance with the requirements of UNECE Regulation No 55-01.

132 Fig. 69. Overall (reference) dimensions of «hatchback» vehicle

133 Table 9 Main parameters and characteristics of 2194 «station wagon» vehicle

Version Luxe Cross Norm Cross Norm Luxe Engine model 21126 21126 11186 11186 21126 21126 21126 Transmission type МКП МКП МКП МКП МКП МКП АКП Number of doors 5 Number of seats, pers. 5 (first line – 2, second line – 3) Number of seats in the fully folded rear seats, pers. 2 Overall dimensions, mm Fig. 71 Fig. 70 Layout scheme with transversely mounted engine and front-wheel drive Engine type four-stroke, spark-plug ignition Engine feed system electronically controlled fuel injection Engine ignition system electronic; static distributor Engine displacement, сm3 1596 Number of engine cylinders 4 Cylinder arrangement in the engine in-line Number of valves in engine cylinders 16 8 16 Nominal compression ratio in engine cylinders 11 10,3 11 Maximum engine power, kW (min-1), (ISO 1585) 72,0 (5600) 64,0 (5100) 72,0 (5600) Maximum engine torque, N.m (min-1) 145,0 (4000) 140,0 (3800) 145,0 (4000) Fuel Gasoline without lead 95 RON

134 Extension of table 9

Version Luxe Cross Norm Cross Norm Luxe Engine model 21126 21126 11186 11186 21126 21126 21126 Unladen weight, kg – Min, kg 1025 –Max, kg 1085 Gross Vehicle Weight Rating (GVWR), kg 1560 Road clearance at full load under the engine not less 182 not less 160 case, mm Road clearance at full load under the transmission not less not less housing (MT/AT), mm 187 165 145 Maximum speed1, km/h 174 174 165 168 178 178 175 Acceleration time up to 100 km/h, sec 11,3 11,3 12,2 12,2 11,5 11,5 13,1 Gross trailer weight2: – without brakes, kg 450 – with brakes, kg 900 750

1 Measured by special technique. 2 Provided that the vehicle is equipped with towing hitch in accordance with the requirements of UNECE Regulation No 55-01.

135 Fig. 70. Overall (reference) dimensions of «station wagon» vehicle

* For the version with roof rails.

136 Fig. 71. Overall (reference) dimensions of vehicle 2194 Cross

* For the version with roof rails.

137 Table 10 Filling values, l

Fuel tank 50 Engine lubrication system with MT: – dry engine fuelling 3,2 – oil and filter replacement 2,9 Engine lubrication system with AT: – dry engine fuelling 4,4 – oil and filter replacement 4,1 Engine cooling and interior heating system* 7,84 Manual transmission 2,2 Automatic transmission to MAX** Brake hydraulic drive system 0,45 Washer reservoir 3,0

* Do not use mixtures of cooling fluids of different brands. ** Automatic transmission is integrated with the piping system and heat exchanger. Fuelling of this system with working fluid is pos- sible only at the certified SSNE.

Table 11 Climate control system coolant (for version with control system coolant)

Coolant type System filling capacity 1234 YF 390 ± 20 g

138 PASSPORT DETAILS last seven numbers – chassis num- ber, for passenger car it corresponds to body number. According to techni- cal requirements «On wheeled trans- port safety» model year is defined as a conventional year indicated by the manufacturer. In JSC AVTOVAZ the model year starts from July, 1 of cal- A plastic identification (factory) endar year. So, in the period from plate is installed on the vehicle (Fig. January, 1 till June, 30 the model 72). The numbers on plastic plate year corresponds to actual year of shall be read as follows: manufacture, and beginning from 1 – vehicle designation; July, 1 till December, 31 corresponds 2– engine designation; to the following year. 3 – spare parts number; VIN is also stamped on the right- (Number for spare parts corre- hand telescopic strut.) sponds to progressive sequence 7 – technically permissible number. max. gross weight of vehicle; When ordering spare parts it is 8 – technically permissible necessary to use the information max. gross weight of truck and containing on identification (fac- trailer; tory) plate.) 9 – technically permissible 4 – manufacturer; maximum permissible load on 5 – EEC type-approving certifi- front axle; cate number; 10 – technically permissible 6 – identification number (VIN); maximum permissible load on (Identification number is decoded rear axle. as follows: first three letters accord- ing to international standards are the code of manufacturer-plant; six fol- lowing numbers or Latin letters – car model; the following number or Latin letter – represents the model year; 139 Fig. 72. Vehicle data. Installation site of name plate – center pillar, RH

140 APPENDICES

Appendix 1

FUELS AND LUBRICATIONS APPROVED AND RECOMMENDED FOR USE OF LADA KALINA AND ITS VERSIONS

MOTOR GASOLINES

Table 1

Recommended gasoline brand

Not less 95 octane gasoline without lead

Notes: 2. Do not use gasoline with organometallic fuel dopes based 1. To ensure engine starting and vehicle operating at low on lead, iron, manganese and other metals. negative ambient temperatures you must use gasolines of cor- 3. It is allowed to use additives that protect the fuel supply responding volatility classes depending on the climatic region. parts and the engine against corrosion, deposits and soot Requirements for the classes of volatility and seasonal use of deposits. These additives must be a part of commercial gasoline gasolines for different regions of the Russian Federation are set by the manufacturer of the gasoline. out in the relevant standards on fuel for internal combustion It is not recommended for owners of vehicles to add second- engines. ary additives to gasoline.

141 Table 2 ENGINE OIL

Based on the table below, determine the level of quality If necessary – change the oil. For this purpose refer to the and oil viscosity grade, prescribed for your vehicle in accor- authorized service center. dance with the existing operating temperature range.

Filling point Description Engine oil SAE viscosity grades and operating temperature range Engine lubrication system Minimum temperature of cooling medium under SAE J 300 viscosity Maximum environment temperature under the the vehicle operation 0С grade vehicle operation, 0С

-40 0W-30 25 -40 0W-40 30 –30 5W-30 25 –30 5W-40 35 –25 10W-30 25 –25 10W-40 35 –20 15W-40 45 –15 20W-40 45 –15 20W-50 up 45 The quality level of operational properties: API SL/АPI SM/API SN СТО ААИ 003 Б5/СТО ААИ 003 Б6

Use only recommended operating and lubricating fluids. For information on the recommended operating and lubricating fluids, refer to the authorized service center.

142 Appendix 2 VEHICLE BULBS

Installation site Bulb category

Headlight* – main beam bulb H1 – dipped light bulb Н7 – direction indicator bulb РY21W –daytime running light and tail light bulb W21/5W

Rear light* – stop signal bulb P21W – backing light bulb (for «hatchback» vehicles) R10W – backing light bulb (for «station wagon» vehicles) W16W – fog light and tail light bulb P21/4W – direction indicator bulb РY21W

Fog light bulb* H11 Direction indicator bulb* W5W Number plate lamp* C5W Interior light C10W Front seat individual reading light T4W Glovebox light C5W Luggage compartment light C5W

ATTENTION! *Headlights and light signalling devices of the vehicle are homologated (have the sign «E») for compliance of light, colour characteristics and light sources (bulbs and lights) with international safety requirements. Using other light sources is not permitted, as it may cause a mal- function of these devices and violation of safety requirements.

143 Appendix 3

HEATING PLUGS*

Engine type Spark plug type

8-valve engine А17ДВРМ JSC «Robert Bosch Saratov» LR15YC-1 BRISK WR7DCX Bosch

16-valve engine АУ17ДВРМ JSC «Robert Bosch Saratov» DR15YC-1 BRISK FR7DCU Bosch

*Spark plug gap should be in the range of 1...1.15 mm.

Appendix 4

USER’S MANUAL FOR RADIO AND AUDIO FILE PLAYER (optional design)

This user manual is applied for radio and sound file WARNING! The warranty is void in case of damages player 2192-7900010-00 (hereinafter referred to as radio) occurred due to negligent handling the product and and is meant for study of its structure, operating principles, unskilled maintenance as well as in case of outside dam- technical features, usage guidelines and service of the ages. product. 144 1. Description of radio

1.1 Appearance

1.1.1 Fig.1 shows appearance of outside panel of the radio and sound file player 2192-7900010-00 is pre- sented.

1.2 Description of control panel

1.2.1 Control panel with relevant figures on Fig. 2 is described in Table 1.

Fig. 2. Control panel of radio (optional design)

1.2.2 To reset radio settings to factory settings in conformity with Table 2, it is necessary to use func- Fig. 1. Appearance and shape of outside panel of radio tion Reset in system setting menu (optional design) (see par. 6.3).

10 Р.Э.-21920, англ. яз. 145 Table 1

№ Name of control device Symbol of control device

1 Microphone 2 SD memory card slot 3 Sound off button MUTE 4 Radio On/Off switch 5 Multifunction button 9 6 Rotary encoder switch, multifunction 7 Display 8 Multifunction button : 9 Multifunction button DISP

10 Phone switch, accept incoming call ( 11 USB Flash drive slot 12 Reset button. Recover radio in case of deadlock 13 Phone switch, return to previous mode, shut off incoming call ( 14 Multifunction button 6 F- 15 Multifunction button SCAN 16 Multifunction button 5 F+ 17 Multifunction button 4 RPT 18 Multifunction button 3RDM 19 Multifunction button 2 TAG 20 Multifunction button AUDIO 21 Multifunction button 14I 22 Multifunction button RADIO

146 Table 2 1.3 Description of display

Parameter Setting Appearance of display is present- Clock time After reset it will be automatically ed on Fig. 3: synchronized by CT 1 – folder number indicator; СТ On 2 – track played indicator; AM On 3 – playing window; 4 – «radio» mode indicator; ВТ On 5 – playing SD-card indicator; AF Off 6 – playing USB-drive indicator; Веер On 7 – connection to radio via BASS 0 Bluetooth indicator; 8 – scanning radio stations indi- TRE 0 cator; BAL 0 9 – random track playing indica- FAD 0 tor; EQ Off 10 – repeat track indicator; RDS RTY No RTY 11 – equalizer indicator; 12 – stereo mode indicator; RTY REG REG off 13 – tone compensation indica- Tone compensation Off tor; Volume 10 14 – silent mode indicator; Memory cell content Constant 15 – traffic information accept- Player stop position Not saved ance indicator; Information on phone connected Saved Saved phone numbers Not saved

10* 147 1.4.2 To remove a memory card, 1 2 3 4 5 6 7 8 9 10 push it. The card will come outside.

1.5 Inserting and removing USB flash drive

1.5.1 To insert USB flash drive, put it into USB Flash drive slot (Fig. 2, pos. 11). 1.5.2 To remove USB flash drive, it is necessary to quit sound file play- ing mode and remove it from USB Flash drive slot with no force applied.

2. Radio control

19 18 17 16 15 14 13 12 11 2.1 General conditions

2.1.1 It is only allowed to control Fig. 3. Display of radio the radio only when you are com- pletely sure that it will not endanger safety of traffic. 16 – traffic information transmis- 1.4 Inserting ATTENTION! sion indicator; and removing memory cards Watch the road carefully! The 17 – search for radio stations by driver is fully responsible for traf- program type indicator; 1.4.1 To insert a memory card, fic safety. Use the device ensur- 18 – accepting local radio sta- put it with beveled side forward and ing control over the vehicle in any tions indicator; to the right into SD-card slot (pos. 2) situation. 19 – search for alternative band (here and after numbers of buttons indicator. are mentioned according to Fig. 1) until it fits. 148 2.1.2 To prevent an accident 2.2 Switching radio on/off tuned is selected rotating encoder when driving a vehicle: rotary switch. – do not tune radio; 2.2.1 To switch radio on and off, 2.3.3 To shut off sound, push – do not make volume very loud as push the button shortly (pos. 4). MUTE button (Fig. 2 pos. 3). To it may prevent perception of alarm Having been switched on, the radio switch on sound, push the button from other vehicles. will turn into mode before switching again or rotate encoder rotary 2.1.3 Try not to park a vehicle on a off. switch. parking under direct sunlight that 2.2.2 In case if the radio does not may cause high temperature rise react to control buttons, push (with 2.4 Time display inside the passenger compartment. fine flat pin) and hold Reset (Fig. 2 Before starting playing, let tempera- pos. 12) button within 2-3 seconds. 2.4.1 If to push DISP button (Fig. ture inside fall down. Having been switched on with the 2 pos. 9) with the radio switched off, 2.1.4 The radio is designed to button (Fig. 2 pos. 4), the radio display will show the current time operate at ambient temperature from within 15 seconds but only with igni- automatically turns into radio playing minus 40°С to plus 70°С. Before use tion on. mode. the temperature inside shall come into tolerable thresholds. ATTENTION! 2.5 Welcome display with 2.1.5 The radio is designed to be The radio maintains user set- radio on connected to on-board system of a tings (radio station bands, sound vehicle with 12V with minus on the settings, user settings) not more 2.5.1 When the radio is switched case. Do not connect radio in vehi- on, the screen will show a welcome than 10 days after battery termi- cles with other voltage values. message «LADA KALINA». nals were disconnected. 2.1.6 USB Flash drive slot is designed to connect USB Flash card, 2.3 Sound settings USB Flash player with memory at least 1024 Mb, USB HDD with FAT 32 file system and Mobile phone (only in 2.3.1 Volume setting is made charge mode). rotating encoder rotary switch (Fig. 2 pos. 6) to the right or to the left. 2.3.2 Short pushing encoder rotary switch allows enter setting sound mode. A parameter to be 149 3. Radio mode – 1 level for VHF range (VHF); – 1st mode. Automatic search for – 1 level for FMAS range (com- next/previous station. To do this 3.1 Radio activation bined VHF-FM range); press one of the buttons 9 or : – 3 levels for FM range (FM1- (Fig. 2, pos. 5 or 8); 3.1.1 To activate the radio use FM3). – 2nd mode. Automatic search for one of the ways listed below: 3.1.5 Each level has 6 memory and saving 6 radio stations with the – by pressing RADIO button (Fig. cells. Memory can store up to 36 most steady reception within FMAS 2, pos. 22); radio stations. range (combined VHF-FM range). At – with radio switched-on by ejec- Note. Some buttons may have default the same time new range FMAS will tion all external drives (USB sticks, frequency, e.g. if least than 6 stations appear on the list of ranges. To do SD cards). were detected during automatic search. this press and hold SCAN button Note. There will be no switching to (Fig. 2 pos. 15) until message Radio mode after removal of external 3.2 Manual search «AUTOSEARCH» appears on the dis- drives, if Radio is in «reception of tele- for radio stations play. phone call» or «playback music from tele- – 3rd mode. Automatic search fol- phone» modes. 3.2.1 When in Radio mode press lowed by storing radio stations 3.1.2 In this mode upper line of and hold 9 button (Fig. 2, pos. 5) or received within set range into radio’s the display will contain radio station’s : (Fig. 2, pos. 8). Radio will switch memory. In this mode search is per- frequency, range and number of cell to manual search for radio stations. formed via short ressing of SCAN where current station is stored. Search is conducted by turning button (Fig. 2, pos.15). Lower line will contain time, radio encoder knob (clockwise – upstream Note. When selecting any of FM1-FM3 text, radio station name (received the range, counterclockwise – down- ranges and starting automatic search, radio will through RDS) and etc. stream the range). store not more than 18 radio stations in its memory (6 radio stations within each range). 3.1.3 Selection of information to Note. This mode is unavailable within Upon end of search, radio will start receiving the be displayed is done by pressing FMAS range. 1st station found within FM1 range. DISP button (Fig. 2, pos.9). 3.1.4 Radio is designed to receive 3.3 Automatic search 3.4 Storing radio stations signals within FM/VHF and AM for radio stations ranges. For this there are 6 levels of 3.4.1 In order to store selected memory provided: 3.3.1 There are three modes of radio station into radio’s memory, – 1 level for AM range (AM1); automatic search for radio stations: press and hold on of the buttons 14, 150 16, 17, 18, 19, 21. Until the num- 3.6 RDS function artist name (selection is made by ber of cell with stored radio station short pressing of DISP button (pos. appears on the display and audio 3.6.1 RDS (Radio Data System) is 9). If the information is larger than 16 signal heard (if sound confirmation a multi-purposed standard designed symbols, the line will be cycled. for button) confirming that radio sta- for transferring information mes- ATTENTION! tion has been successfully stored. sages via channels of transferring modulation of broadcast within VHF The radio plays back audio files Note. Station storing by user is not in MP3 и WMA formats. available for FMAS range. range. 3.6.2 Radio has RDS functions 4.2 Playback start/stop 3.5 Listening to previously provided in Table 3. found radio stations 4.2.1 To start the audio files play 4. Audio mode back you should: 3.5.1 Selection of radio station – install SD/USB with audio files; 4.1 Playing back audio files stored within memory is performed – press button 14« I» (Fig. 2, pos. 21). by brief pressing of 14, 16, 17, 18, 19, 21 (Fig. 2) buttons. 4.1.1. Switching to the audio files Note: Playback is automatically stops listening mode can be carried out in after pressing MUTE button (Fig. 2, pos. 3.5.2 Upon brief pressing of 3) or when incoming phone call is RADIO button (pos. 22) range of the following ways: received and automatically continues received waves will be switched as – by connecting of SD-card; after pressing or turning encoder handle follows VHF – FM1 – FM2 – FM3 – – by connecting of USB-drive; (Fig. 2, pos. 6), or after end of phone call. FMAS (this range will be available – by pressing AUDIO (Fig. 2, pos. 20). after searching within combined 4.3 Displaying of additional Note. Switching to AUDIO mode will information (if any) VHF-FM) – AM1, by loop. not happen if the receiver is in CALL mode. Note. If CB range is switched off in 4.3.1 Press button 2 TAG (Fig. 2, user’s settings, then modes will be 4.1.2 Correct connection is pos.19) – the additional information switched in the following sequence VHF – FM1 – FM2 – FM3 – FMAS (this Range is described in Appendix В. about the current file will be dis- available after search within combined 4.1.3 In this mode in the upper line played (singer name, album title or VHF-FM range only). (Fig. 4, pos. 3) the number of folder song title) with МР3 extension. or track title and current track time is 4.3.2 To stop displaying this infor- indicated. In the lower line – the track mation press again 2 TAG (Fig. 2, name → file name → folder name → pos. 19). 151 Table 3 (pos. 17) up to appearing the mes- sage «FOLDER REPEAT». The sym- RDS function Description bol RPT (Fig. 3, pos. 10) will be active and indicator FOLDER (Fig. 3, pos. 1) – AF Activation of alternative frequency (AF) makes the receiver to search blinking. the best receiving of the chosen station. During the search of the best 4.4.4. Switching On and Off the receiving, the broadcasting may be temporarily interrupted. If the random playback mode is made by receiving quality is poor and it is not possible to find alternative fre- short pressing of 3 RDM (pos. 18). quency, choose other station The symbol RDM (Fig. 3, pos. 9) is PS Informs the title of programs transmitted by station active, and in the lower line of display there is short message «RDM FOLD- TP Contains information about traffic organization on the chosen road ER» present. At random playback the indicator RDM (Fig. 3, pos. 9) is TA Contains information about road traffic present, and sign FOLDER (Fig. 3, CT Continuously updated information on date and current local time that pos. 1) is blinking. can be used for displaying or automatic time setting 4.4.5. Switching On and Off ran- dom playback mode of whole medi- PTY Automatic search of programs of specific type um is made by pressing and holding 3 RDM (pos. 18). Sign RDM is active (Fig. 3, pos. 9), and in the lower line there is a message «RDM ALL». 4.4.6. Buttons 6 F– or 5 F+ (pos. 4.4 Controlling 4.4.2 Switching repeated play- 14 or 16) are used for fast switching playback modes back on/off is made by short press- for previous or following folder play- ing of 4 RPT button (pos. 17). RPT back. To chose necessary folder 4.4.1 If USB and SD are contem- indicator is on (Fig. 3, pos. 10), and (with title indication) turn the porarily installed there are both icons TRACK symbol (Fig. 3, pos. 2) will be encoder handle after short pressing active (Fig. 3, pos. 5 and 6), the icon blinking. of SCAN button. To chose necessary of playing medium is blinking. 4.4.3. Switching On and Off track (with title indication) turn the Playback source choosing by AUDIO repeated playback mode is made by encoder handle after pressing and button. (Fig. 2, pos. 20). pressing and holding 4 RPT button holding of SCAN button. 152 4.5 MUTE mode 5.2 Connection of telephone 5.2.5. To connect to audio system with Bluetooth® function activate Bluetooth® function on the 4.5.1. When pressing the button phone. If your phone is discoverable, ATTENTION! MUTE (Fig. 2, pos. 3) there is corre- turn on this mode. It is recommend- sponding sign in the lower part of Respect law requirements ed also to read user manual of your screen (Fig. 3, pos. 14). regarding the use of the phone in phone to get additional information 4.5.2. To switch the sound on the car. on setting and connection of press the button MUTE again (Fig. 2, 5.2.1. The phone shall be Bluetooth® devices. pos. 3) or increase the volume by switched off in the areas with restric- 5.2.6. To connect your phone to encoder. tion to use cell phones! Consider radio system it is necessary to acti- acting instructions and prescrip- vate search of new Bluetooth® 5. Bluetooth® mode tions. devices on your phone. In the 5.2.2. Audio system supports the list of Bluetooth® devices choose 5.1 Switching On and Off following services: ММС12. If password requested input Bluetooth® function – Bluetooth® version 1.1 specifi- «0000». cation and later (recommended 5.1.1 There are several ways to Note. To make this operation read 2.1+EDR); switch Bluetooth® on and off: user manual of your phone. – menu «Tel connection» in sys- – HFP (Hands Free Profile) version 5.2.7 When the phone is connect- tem setup of the radio system; 1.0 or later; – A2DP (Advanced Audio ed, BT sign will be indicated on the

– by long pressing ( button (Fig. 2, pos. 10) – switching on Distribution Profile) version 1.0 or screen (Fig. 3, pos.7). Bluetooth®; later. 5.2.8. The radio system is able to 5.2.3 If cell phone does not sup- work only with one phone simultane-

– long pressing ( button (Fig. 2, pos. 13) – switching off port HFP, it is impossible to register ously. To connect another phone it is Bluetooth®. cell phone and use A2DP service necessary to deactivate Bluetooth® separately. function on connected one and con- 5.2.4. Before connecting, make nect other phone. sure that the phone has Bluetooth® Note. Some cell phones may work function. incorrectly in Bluetooth® mode with this radio that is not a sign of malfunction. Check functionality of radio system with 1Bluetooth® ( ® ) is a registered trademark of Bluetooth SIG, Inc. corporation. other cell phone. 153 5.2.9. The correct functioning is 5.4.4. During phone call it is pos- – Start player on the phone (not all not guaranteed with a cell phone with sible: cell phones support this function). two and more sim-cards. It is recom- – to modify volume by encoder 5.5.2 Blayback control is made mended to consult phone user man- handle (pos. 6); similiar to AUDIO mode. ual. – to accept incoming call by Note. Before using this function

pressing ( button (Fig. 2, pos. please ensure that your phone supports 5.3 Phone disconnection 10); A2DP.

– to end the call pressing ( 5.3.1 You may disconnect cell button (Fig. 2, pos. 13). 5.6 Saving and calling phone as follows: 5.4.5 Radio system keeps the phone numbers – Switch off Bluetooth® function information on the last connected on your cell phone; cell phone. In case of connection 5.6.1 Your radio system saves the ceasing, for example during moving

– press and hold ( button (Fig. last incoming/outcoming number. off from the car and returning, to 2, pos.13). 5.6.2 To see the last number:

connect the phone again press ( – enter «Telephone» mode (press- Note. If the phone is disconnected button (Fig. 2, pos.10).

during a call, the call will automatically ing the ( button (Fig. 2, pos. 10), switch from loudspeakers to cell phone. Note. Not all cell phones support this pressing again the ( button (Fig. function. To restore the connection 2, pos. 10), the number will be dis- 5.4 Phone call Bluetooth® function on the phone played on the screen; should be active and phone should be visible (depending on the phone model). – if you are in «Telephone» mode

5.4.1. If a call comes to cell phone press ( button (Fig. 2, pos. 10), in the lower part of the screen 5.5 Audio files playback the number will be displayed on the appears calling number (this func- via the phone radio screen. tion depends on service package You may save up to 6 numbers: provided by your mobile operator). 5.5.1 In Bluetooth® mode, in – When the last incoming/out- 5.4.2. Call acceptance is made by case A2DP protocol is supported by coming phone number is displayed,

pressing the ( button (Fig. 2, the phone, you may listen to audio press and hold one of the buttons pos. 10). files played back on the cellular 1–6 till the number is displayed in 5.4.3. To decline or finish the call phone via the vehicle audio system. the middle of the line;

press the ( button (Fig. 2, pos. – Press button AUDIO (pos. 20) – There is a possibility to save cur- 13). and chose A2DP mode; rent phone number during call, 154 pressing and holding one of the but- Note. If user does not make any – turn on/off the function of radio tons 1–6 till the number is displayed adjustments during 5 minutes, the setting stations seeking based on the set in the middle of the line. mode turns off automatically. program type (RDS PTY); 5.6.3 To call the saved number it is 6.2 Screen for adjustment – turn on/off the function of local necessary to pass to «Telephone» of selected audio parameter stations receiving (RDS REG); – turn on/off of mid-band range

mode, shortly pressing ( button (Fig. 2, pos. 10). Then chose the 6.2.1 Press encoder in the (AM- range); desired number pressing one of the respective menu item to enter this – turn on/off of Bluetooth func- buttons 1–6 and the number will be mode. Turn encoder knob to adjust tion (tel. connection); displayed in the lower line. To con- selected parameter. – turn on/off of buttons pressing acknowledgement signal (signal); firm the choice shortly press 6.2.2 Equalizer is set in the follow- – turn on/off of noise suppression button of number dialing confirma- ing order: → → function (noise suppression); tion ( (Fig. 2, pos. 10). EQ JAZZ EQ POP EQ CLAS- – reset radio settings to the facto- SICS → EQ VOCAL → EQ USER. Note. The phone numbers saved may ry settings (reset). be deleted from memory by resetting 6.2.3 Tone adjustment range LF, 6.3.2 Press encoder long to enter radio system to factory settings (part 6.3 HF, Balance, Balance front/rear is system setting mode while in the «System settings»). ‒ from « 7» to «+7» units. «main screen» (display screen). Turn encoder to select the available set- 6. Setting mode 6.3 System settings tings and adjust the selected param- eter. Press encoder short to adjust 6.1 Audio parameters setting 6.3.1 By means of system settings the selected parameter and ackno- you can: wledge the setting. 6.1.1 Press encoder short while in – set time displaying format (time 6.3.3 You can quit the system set- the «main screen» (display screen) to mode); tings mode through the menu item enter this mode. – set the current time manually «Quit» or automatically (if no adjust- 6.1.2 Turn encoder in the follow- (hours/minutes setting); ments are performed during 5 min- ing order to switch and to change – turn on/off the current time utes). parameters: Equalizer →Low adjustment by RDS signals (RDS Frequency Tone → High Frequency CT); 7. Non-warranty cases Tone → Balance → Balance – turn on/off the function of auto- front/rear → Tone compensation → matic switching to the alternative 7.1 Non-warranty cases are spec- Exit. broadcast frequency (RDS AF); ified in the Table 4. 155 Table 4

Occurrence Typical place of occurrence Cause

Liquid spilled on unit (inside it) Flow marks from outside and inside of Violation of operation rules for unit unit. Smoke fume

Smoke fume Surface of unit, inside the part Incorrect connection, downfall, unauthorized repair, ingress of liquid into the unit

Breaking of seals, geometry or initial Junction of unit components (fractures, Opening (or attempt to open) without special sate of unit surface cracks), stripped fastener nicks instrument. Unauthorized opening

Traces of insects or animals Surface, inside Cockroaches, ants, bugs, hairs, etc.

Broken operating controls Buttons and controls Mechanical action (impacts, downfalls, etc.), Careless use

Impossibility of identification of serial Spots of factory labels and trademark Mechanical, thermal action, etc. number. Erased, failed number and stickers Unauthorized opening trademark sticker

Chips on unit frame, cracks Frame corners, rear part of covering, fix- Mechanical action (impact, downfalls, care- ture of support, trays, covers, tubes less operation, etc.)

Mechanical damage of radio compo- Violation of operation rules. Careless operat- nents in a unit, and of current-carrying ing tracks

Electrical damage of radio compo- Faulty fitting of junction elements, operation nents or of current tracks, detected of unit under non-standard (undocumented) visually modes

Non-availability of authorized radio Violation of operation rules. Attempt of inde- components at their respective places, pendent repair availability of fixed non-authorized radio components. Soldering prints

156 Table 4 continued

Occurrence Typical place of occurrence Cause

Intense dust pollution or contamina- Inside the unit. Surface Operation of unit under conditions not tion of unit, condensate inside the designed for this class of products unit. Organic and non-organic depo- sits

Foreign objects inside the unit (paper Violation of operation rules clips, pins, etc.) (Applicable to prod- ucts with ventilation holes or channel for access without product opening)

Deformation of cables connectors, Connecting cables and connectors Gross mechanical impact, careless connec- deformation of connecting cables or tion, misalignment during installation heir visually detected damage

The unit doesn't get started, hangs up FLASH memory chip Software is damaged. User's attempt to at LADA logo, white screen reprogram

The display is broken; there are Unit surface Mechanical action (impacts, downfalls, etc.) cracks or scratches on display

Damage of anti-reflective, tinted coat- Display surface External action of «aggressive» liquids ing of display (aerosol spraying close to the screen). Use of inappropriate technical liquids to clean the display screen

Burrs in the area of fastening ele- Unit case, unit surface Attempt of independent repair ments of «latch» type

Traces of mounting tool on the splines Unit case, unit surface Attempt of independent repair of screw connection elements of the case or close to them

157 End of Table 4

Occurrence Typical place of occurrence Cause

The screen does not respond to Display Mechanical action (impacts, downfalls, etc.) pressing

Distorted colors (red, green and simi- Display Mechanical action (impacts, downfalls, etc.) lar colors of the screen)

No connection to the phone, unstable Individual incompatibility of phone and unit operation of the Bluetooth function

Radio stations seeking doesn't work Antenna cable Antenna cable rupture. Incorrect installation of the unit on the car

After the installation of USB-flash USB-cable USB-cable rupture. Incorrect installation of drive with audio files the unit doesn't the unit on the car. detect files in the audio player screen Unsupported type of USB-drive (doesn't go to the audio player mode)

After installing SD card with audio files Unsupported type of SD-card on it, audio player window not detect- ing files (not switching to audioplayer mode)

No video files playback, slow motion Unsupported video files format playback of video files, no sound/ no mage during playback, video and audio out of synchronization during video files playback

Hang-ups, unstable operation fixed by restarting of the unit (by long pressing on the power button)

158 Appendix 4a Appendix 4b (reference) (reference)

Search parameters List of radio broadcasts transmitted within RDS system with RDS modes № Program type Display image 1. When RDS modes are on (AF, PTY on display) automatic search is 1 News NEWS done in accordance with selected 2 Miscellanea VARIED mode. 3 Pop music POP MUSIC 2. In PTY mode only radio sta- tions, which support RDS and trans- 4 Rock music ROCK MUSIC mit programs meeting the user set 5 Other music OTHER MUSIC type can be searched. 6 Children's programs CHILDREN’S PROGRAMMES 3. For sequential search for all available stations in the selected 7 Leisure LEISURE range deactivate the PTY modes, i.e. 8 Jazz music JAZZ MUSIC PTY. 9 Old hits OLDIES MUSIC 10 News FOLK MUSIC

159 Appendix 4c (reference) Appendix 4d (mandatory) Correct connection conditions 1. Only connection of USB devices Note. More files/folders on the stor- Radio care with 2.0 specification is possible. age – longer time of loading. It is recom- 2. The file table (FAT) of the con- mended to use a storage, which contains 1. When cleaning the passenger only audio files. nected device should be FAT16 (< 2 compartment avoids liquids getting GB) or FAT32 (> 2 GB). Maximum 7. For maximum speed of access inside the radio. It can cause short number of primary sections is 4. to files, it is recommended to use circuit and other damages. 3. At reproducing a record from a SD-cards class 4 and higher. 2. Use a soft cloth to wipe out fin- gerprints the display, wet it with pure large external storage a delay can alcohol if needed. occur due to reading of the file struc- ATTENTION! ture. Do not use extension USB- ATTENTION! 4. At reproducing a record from a cables and USB-hubs for connec- too branched directory structure, a tion of device. Do not use solvents – benzene, delay can occur due to reading of the turpentine etc., they can damage file structure. 8. The radio supports the follow- the display surface. 5. Recommended directory struc- ing audio files: 3. Handle the display with care: ture of connected device is maximum *. МР3. With constant or variable strong press with your finger or a eight levels. Maximum 1000 files in bit rate, the transmission rate 32-320 touch of sharp objects can leave one directory. kb/s and sampling rate 44.1/48 kHz; *. WMA. (w/o DRM). With con- dents or scratches on display. 6. The radio meets the following stant bit rate and transfer rate of formats of external storage: 10-320 kb/s, variable bit rate and SDHC до 32 Gb; transfer rate 32-192 kb/s. SD до 32 Gb; USB 2.0 до 64 Gb; USB 3.0 до 64 Gb. SD card slot: supports SD, SDHC cards 32 × 24 × 2.1 mm.

160 Appendix 4e (mandatory)

Fault Diagnosis

Fault Remedy

Radio does not turn on Make sure that supply circuit terminals are in good repair, not contami- nated. Make sure that radio supply voltage is 12 V on the terminal. Make sure the temperature in passenger compartment is within acceptable limits

No Bluetooth connection between radio and mobile Make sure that Bluetooth function in mobile phone is on and tuned phone Reload the radio, see p. 2.2.3. Make sure that «Telephone connection» in radio options is activated

Radio does not respond to pressing of buttons Reload the radio, see p. 2.2.3

The radio receiver doesn’t find any radio station Make sure that you are within signal detection area. Reload the radio, see p. 2.2.3

The radio receiver doesn’t find SD-card/USB – Make sure that SD-card/USB-flash-disk meets the specs (see Аppen- flash-disk dix 3). Make sure that SD-card/USB-flash-disk contains audio data. Reload the radio, see p. 2.2.3

11 Р.Э.-21920, англ. яз. 161 Appendix 4f (reference)

List of abbreviations and conventions AF – List of Alterative Frequencies. Possibility of automated retuning of the radio, for example, in case of poor signal receiving at some frequency band, to another frequency band which also transmits the signal of selected program. AM – АМ-band AUDIO – Аn audio term related to sound files transmission technologies А2DP – Bluetooth® profile used to reproduce the music saved in telephone memory through the radio BAL – Balance BASS – Low frequencies sound tone Веер – Signal BT – Bluetooth provide for data exchange between devices СТ – RDS function used to correct time by signals of radio stations DISP – Display EQ – Equalizer FAD – Front/rear speakers balance F+ – Go to next folder F– – Go to previous folder FM – FM-band MUTE – Sound shutoff RDM – Random reproduction mode (Random) RPT – Repeated reproduction mode (Repeat) SCAN – Scanning SD – Secure Digital Memory Card format TAG – Metadata of audio file TRE – High frequency sound tone USB Flash drive – USB (Universal Serial Bus – flash drive – data store) VHF – Very high frequency band

162 Appendix 4g (reference)

Frequently asked questions tions and allows to connect two What Bluetooth versions are devices which can have objects supported? What is stream audio- Blue- between them. The connection can Bluetooth standard has many ver- tooth or A2DP? be set in a range of about 10 meters. sions, which ensure certain func- A2DP – Advanced Audio Distribu- The connection can be kept even if tions. The radio meets Bluetooth V tion Profile. It is used to transfer one of the devices is in your bag or 2.0 standard and includes the follow- stereo sound by Bluetooth radio pocket. ing standards: channel to any receiving device, for – standard access profile GAP example, from a telephone or MP3- If Bluetooth is a standard, why V 2.0; player to another device, such as a not all phones can work with the – Advanced audio distribution pro- radio. The radio supports audio data system? file A2DP V 1.2. transfer using the A2DP technology. Unfortunately, though Bluetooth is a standard, it is up to the manufactur- How do I know if my device sup- er to use it in the phone. Often some ports stream audio Bluetooth? unique functions are added to differ- Please refer to the device user entiate the product, it can cause manual to ensure that it supports incompatibility. In some cases A2DP. incompatible software can be installed on the phone in process of What mobile phones can be its use, this interrupts compatibility. connected through Bluetooth? If a phone does not work with the Most mobile phones can connect- radio installed in the car, the user ed through Bluetooth. most often blames the car equipment but not the phone. Sometimes What is Bluetooth? upgrading of the phone software can Bluetooth – wireless standard, solve the problem. which allows to connect two devices to each other. It is used for applica- 163 Автомобиль LADA Kalina и его модификации Руководство по эксплуатации на английском языке (состояние на 16.02.2016 г.) Разработчики: Ю.В.Сабанов, Н.В.Казаков, А.В.Мингачев Художник Е.И.Брейкин Корректор Н.С.Фомина Компьютерная верстка Т.В.Лисина

1 Формат 60х90 /16. Объем 10,25 п.л. Заказ 196. Тираж 339. Отпечатано ООО «Двор печатный АВТОВАЗ». Март 2016 г.

21920-3902012-30 АНГЛИЙСКИЙ ЯЗЫК USER MANUAL FOR LADA KALINA AND ITS VERSIONS