DOCSLIB.ORG

View Catalogue

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
View Catalogue Page 1 The Professional Detailers First Choice SYMPLEX SILEX 9H CERAMIC COATING! Symplex® Silex 9H, Ceramic Clear Coat Quartz Treatment 9H, Specifically engineered for the professional detailer. This unique ultra concentrated Si02 formula will leave a Mirror- Like clear coat with extreme 9H hardness and water-repellency. Symplex® Quartz treatment Contains the latest SiO2 Technology. A clear, nano crystalline coating that protects your vehicle from weather, chemicals, and UV rays while repelling water, dirt and other contami- nants.This product is intended to be used only by Professionals SYMPLEX SILEX CERAMIC COATING 9H LIMITED GUARANTEE When Properly maintained with quality products, Symplex provides a limited guarantee against cracking, bubbling, peeling turning yellow, no more than 25% loss or color for 2 years, the guarantee is valid as long as the maintenance are performed in accordance with the manufacture’s recommended installation procedures. The guarantee does not cover any defects other than those specified above and is made solely to the original purchaser and may not be transferred. If the product fails to conform to the guarantee during the KIT COMES WITH THE FOLLOWING specified period. Purchaser may obtain replacement product at the 100 ML BOTTLE authorized Silex 9 H Dealer. Proof of purchase is required by the dealer 4 APPLICATORS to support guarantee claim. The specified period commences at the invoice date and does not apply to any product that has been altered or misused, rust on coated surfaces due to damage from collisions, accidents, scratches, impacts or normal and intended use of the product are not covered. Symplex will not reimburse for the loss time. Ducan 1910 Broadway Street, Port Coquitlam, BC, V3C 2N1 PH. (604) 942-0722 FAX (604) 942-3601 [email protected] Page 2 Ducan can help you increase your market presence! With custom license plate holders & rear decals, you can create your own personal touch with you customers! Great for Dealerships! Purchase in Quantities of 500, 1000 & 2500! QTY 500 - 281LICFRAME500 QTY 1000 - 281LICFRAME1000 Speak to your Ducan Sales Representative today about placing your next rear decal order with Ducan! 9990200DL - CALL TODAY FOR A QUOTE! 1800-943-8226 Ducan 1910 Broadway Street, Port Coquitlam, BC, V3C 2N1 PH. (604) 942-0722 FAX (604) 942-3601 [email protected] Page 3 The Professional Detailers First Choice SNAPPY CLEAN A very special highly DUCA-SOL EXTRA concentrated, fast working cleaner/degreaser that A Powerful, breaks down and concentrated all- dissolves grease, dirt & purpose cleaner & grime. Low caustic. degreaser. Biodegradable. No arsh Dissolves all fumes, low to no odor. petroleum based Great for cleaning inside products, dirt's, vehicles grime, glue, soot, road film, brake dust and bugs. Duca-Sol Extra has degreasing properties to combat even the dirtiest and greasiest surfaces. 207DSC1004 1 GAL POTASSIUM 207DSC1020 5 GAL HYDROXIDE BASE 207DSC1205 DRUM POWER HOUSE II Powerful, concentrated all-purpose cleaner & degreaser. Works great on Alberta gumbo. SODIUM HYDROXIDE BASE 207DDF1004 1 GAL 207DPH2004 1 GAL 207DDF1020 5 GAL 207DPH2020 5 GAL 207DDF1205 DRUM 207DPH2205 DRUM ALL PURPOSE CLEANER FALL-OUT REMOVER A low-cost universal concentrated Specially designed to remove iron cleaner. Use to clean vinyl's, floor dust particles embedded in paint mats and whitewalls. film. A combination of oxalic acid Do not use on glass and sulphuric acid removes tiny dots of rust without damaging paint 207DAP1004 1 GAL finish. 207DAP1020 5 GAL 207FR1020 5 GAL 207DAP1205 DRUM 207FR1205 DRUM A-50 ALUMINUM CLEAN YELLOW PINE FLOOR CLEANER Fast acting acids and wetting A concentrated powdered floor agents remove road film, oxidation cleaner. Leaves shop floors clean, and most dirt's from unpainted clean, clean. Free rinsing with a hint aluminum surfaces leaving a shiny of pine. finish. 207AC1004 1 GAL 207AC1020 5 GAL 207AC1205 DRUM 207YP1020 5 GAL Ducan 1910 Broadway Street, Port Coquitlam, BC, V3C 2N1 PH. (604) 942-0722 FAX (604) 942-3601 [email protected] Page 4 The Professional Detailers First Choice DURO-SOLV LACQUER THINNER This super solvent Lacquer Thinner is also removes wax, silicone, ideal for cleaning spray pin striping adhesives guns and spraying and decals. Great paint equipment used for prep. Removes grease lacquer paints. Both from upholstery and auto body paint shops carpets. and do-it-yourself enthusiast who spray their cars use Lacquer Thinner to flush out equipment after each use and to clean brushes and rollers. 207DDS1004 1 GAL 207DDS1020 5 GAL 207LT1004 1 GAL 207DDS1205 DRUM 207RC13558 5 GAL RAPID REMOVER CITRO POWER Adhesive Remover works in 30 to 60 This product is a water-based natural powerful seconds, safe "water soluble" formula. Will citrus solvetn degreaser emulsifier deodorizer not cause damage to most painted or bare for a multitude of industrial and food plant metal surfaces. Easily removes decals & applications. It is NON CORROSIVE and stickers. contains no harmful chlorinated solvents, acids 207RR32 1 GAL 207RR128 5 GAL 207CPJ48420 5 GAL TOLUENE GUN WASH Toluene is a thinner for specialty paints and coatings. It is a good Gun Wash is economically ideal for general cleaner and degreaser. Its cleaning spray guns and spraying evaporation rate is slower than acetone but faster than Xylene equipment for oil based paints and Lacquers. 207DTO1004 1 GAL 207DTO1020 5 GAL 207GW1020 5 GAL R1 TAR, WAX, GREASE REMOVER R3 - FABRIC CLEANER SPOT REMOVER R4 - PROTECTIVE COAT REMOVER A non-harmful solvent for Great for removing Great for removing heavy removing tar, wax & grease. petroleum based products spots of cosmoline found Will not harm cured paint. such as grease, oil, and on some imports. All Great for removing decals gum from any upholstery. purpose body solvent. and stickers. Safe on cured paint. *Body Shop Safe 207GRR1G 1 Gal 207GRR3G 1 Gal 207GRR4G 1 Gal TREE SAP REMOVER METHYLHYDRATE CITROL AEROSOL SUPER SOLV Removes Tree Sap & Dissolves most types Quickly removes tar, wax, grease, of inks, gums, It outperforms solvent and other types of sticky silicones and oils from motor parts, alkaline cleaners for removal substances lipstick, crayons and painted surfaces and tooling. Use of heavy greases, carbonized many other stains. super solv with a plastic razor oils, gear lubes, grease blade to remove pinstriping and buildups, oily deposits, tar other decals safely from painted deposits surfaces. 207CITROL 16 OZ 207HT18007 16 OZ 207LUTSR4 207METHYLHYDRT Ducan 1910 Broadway Street, Port Coquitlam, BC, V3C 2N1 PH. (604) 942-0722 FAX (604) 942-3601 [email protected] Page 5 The Professional Detailers First Choice HI-TECH EXPRESS CAR WASH WASH & WAX ECO WASH Utility car wash detergent contains two Versatile, high sudsing, heavy duty super wetting agents and water detergent. Made with coconut oil for miscible solvents. Digs under dirt and softness and siloxanes for sparkling emulsifies suspended solids for free paint finishes. Formuline free. Safe for rinsing application. all drains and sewer systems. 207WW2004 1 GAL 207HTECW1020 5 GAL 207WW2020 5 GAL 207HT66155 DRUM 207WW2205 DRUM JET CLEAN PLUS LIQUID CARPET CLEANER Designed to be used in power washers A special blend of chemicals with hot or cold water. It contains formulated for use in hot water solvents and emulsifiers for degreasing and detergents to remove dirt and road extraction equipment. Contains organic film. It is safe to use on all painted solvents & special carpet cleaning surfaces, chemicals to provide fast efficient results - low foaming action 207JC1020 5 GAL 207LCC1004 1 GAL 207JC1205 DRUM 207LCC1020 5 GAL VINYL CLEANER LEATHER CLEANER Powerful water based all purpose Foaming action concentrate removes degreaser designed to remove oil, grease embedded dirt from hard to reach and dirt. Rinse with water. Fast working. places. Rinses easily, leaving leather Must be diluted. Ideal for vinyl, convertible supple without clogging pores. Follow and boat tops and white interiors. up with Lexol Conditioner. *Body Shop Safe 207GRI4G 1 GAL 207EQ3816 1 LTR PURPLE HAZE INVADER PENETRATE ENZYME STAIN REMOVER HF acid replacement technology Loosens rusty or corroded that works as good as ABF Pet stain remover and parts. Lubricates & protects aluminum cleaners. Dilute as moving parts. Displaces needed. Good for cleaning metals deodorizer. Bacteria culture moisture & prevents corrosion with brake dust, oil, dirt and road breaks down organic wastes. film 207FLENZ1G 1 GAL 204HT18009 15 oz 207HT76705 5 GAL 207FLENZ1L 1 LTR ORANGE POP CITRUS FAST & FOAMY EXTRA FOAMY DEGREASER Velour, fabric & Cleans and Natural citrus extracts, strong carpet cleaner. Dry conditions vinyl, enough to tackle even the foam to lift out dirt plastic, cloth, leather heaviest degreasing tasks. without wetness. and hard surfaces. Cleans safely and effectively. VFC optical Lifts dirt while Leaves a pleasant citrus aroma. brighteners, cleans restoring true colour and deodorizes. and appearance. 207HT18018 15OZ Sprays upside down. DOCTOR FOAMY Enzyme Carpet Cleaner that dissolves grease & soil stains. Digests protein & organic Stains. Great for pre-treating prior to cleaning 207HT18019 18.5 OZ 207HT18004 18.5 OZ 207HT18003 18.5 OZ Ducan 1910 Broadway Street, Port Coquitlam, BC, V3C 2N1 PH. (604) 942-0722 FAX (604) 942-3601 [email protected] Page 6 The Professional Detailers First Choice GLASS CLEANER TOTAL RELEASE BETACLEAN GC-800 Extra cutting Effectively removes contamination A true deodorant Sprays on, wipes off Foams for strength to lift dirt which oxidizes odor dirt, road film and grease cleanup. and film without elements. Doesn't run. Evaporates quickly to streaking, hazing or ensure a residue-free bonding smudging. surface AMMONIA FORTIFIED 207GC800 207HT18025 Lemon 218HT19095 AMMONIA FREE GLASS CLEANER Tropical 218HT19090 GLASS CLEAN RTU Mountain Air 218HT19045 Doesn’t leave a Cinnamon 218HT19050 Available as concentrate or ready to film. Quick wipe off. Bubble Gum 218HT19055 use. 3 types of alcohol and 2 wetting Non-streaking. Fresh Air 218HT19065 agents. Dissolves bugs, road- Fresh fragrance. Fresh Linen 218HT19075 grease, smoke, and exhaust films.
Load more

Recommended publications
  • Ahead of the Rest
    2016 2017 Ahead of the Rest Welcome to our proud “Family of Products” Merging Finger Lakes, Castle, Econo, and Echo into one catalog displays www.CastleOctaServices.com America’s broadest line of professional products. Decades of research and development have helped us create a deep, multi-dimensional line. Five reasons why the Castle Group is your best value: PROFITS 1 Since 1967 our trademarked packaging and patented formulas have given exciting new profit opportunities. SUPPORT 2 Service menus, training seminars, POP displays, radio and TV tags, and apparel. FACTORY DIRECT 3 Strategically placed satellite warehouses provide service with no freight and no minimum. Battery HI-TECH Service 4 Product Technical Info is constantly updated. We help you satisfy your “User Right to Know” responsibilities! SAFETY 5 We help you comply with government regulations. The Castle Racing Team started in the early 1970’s with the inception of the Castle Dragon Fire Dragster. Over the years Castle cars and crews have been spotted at drag strips, dirt tracks, and asphalt circuits: 1980’s: J.D. McDuffie uses Castle in his shop and Castle on his #70 Pontiac in the Winston Cup Series. 2002 – 05: Castle unveils its “Racing for Clean Air” Campaign, with Andy Santerre as Racing Team Captain. Andy was NASCAR Busch North Series (BNS) Rookie-of-the-Year in 1993 and NASCAR Busch Series Rookie-of-the-Year in 1998. Santerre would go on to win four straight BNS Points Championships (2002-2005). 2006: Andy retires from racing to concentrate on building race cars and tutoring young drivers as Andy Santerre Motorsports (ASM).
    [Show full text]
  • (12) Patent Application Publication (10) Pub. No.: US 2014/0290802 A1 Morita Et Al
    US 201402908O2A1 (19) United States (12) Patent Application Publication (10) Pub. No.: US 2014/0290802 A1 Morita et al. (43) Pub. Date: Oct. 2, 2014 (54) SURFACE TREATMENT METHOD AND (30) Foreign Application Priority Data COATING METHOD FOR STEEL MATERIAL, AND METHOD FOR PRODUCING MACHINE Oct. 25, 2011 (JP) ................................. 2011-234331 COMPONENT Publication Classification (51) Int. Cl. (75) Inventors: Haruji Morita, Hanno-shi (JP); Tsuneo C23C 8/42 (2006.01) Tate, Setagaya-ku (JP); Akira C23C 8/80 (2006.01) Shiozawa, Okaya-shi (JP) (52) U.S. Cl. CPC. C23C 8/42 (2013.01); C23C 8/80 (2013.01) (73) Assignees: KOMATSU LTD., Tokyo (JP); USPC ........................................... 148/241; 148/253 NIPPON KAZAI CO.,LTD., Okaya-shi, Nagano (JP); COTEC (57) ABSTRACT CORPORATION, Tokyo (JP) This Surface treatment method comprises a rustproofing step, a rinsing step, and a cleaning step. In the rustproofing step, a (21) Appl. No.: 14/350,724 rustproofing liquid containing orthophosphoric acid and an organic acid is used to perform a rustproofing treatment on the (22) PCT Filed: Sep. 12, 2012 Surface of a steel material. In the rinsing step, a treatment 9 liquid containing an oxoacid salt of a transition metal is used to perform a rinsing treatment on the Surface of the Steel (86). PCT No.: PCT/UP2012/073363 material. In the cleaning step, the Surface of the steel material S371 (c)(1), that has undergone the rinsing step is subjected to a cleaning (2), (4) Date: Apr. 9, 2014 treatment. (a) Shape of film formed by this surface treatment method (SEM, x10,000) Patent Application Publication Oct.
    [Show full text]
  • Corrosion Resistance of Hot-Dip Zn-6%Al-3%Mg Alloy Coated Steel Sheet Used in Automotive Parts
    Corrosion resistance of hot-dip Zn-6%Al-3%Mg alloy coated steel sheet used in automotive parts Masaaki Uranaka, Takeshi Shimizu – Nishhin Steel, Osaka, Japan ABSTRACT RIASSUNTO For the purpose of applying hot-dip Zn-6%Al-3%Mg alloy Con lo scopo di applicare il rivestimento “Zn-Al-Mg” sui coated steel sheet (“Zn-Al-Mg”) to automotive parts, we laminati di acciaio per componenti di autoveicoli, mediante compared and investigated the corrosion resistance of Zn- “immersione a caldo” nel bagno della lega Zn-6%Al- Al-Mg and ordinary materials treated using a conventional 3Mg, gli Autori hanno studiato la resistenza a corrosione rustproofing method (“post-Zn-coated material”) exposed del rivestimento “Zn-Al-Mg” confrontandola con quella to accelerated corrosion test environments. We also dei materiali comuni trattati con metodi convenzionali di collected automotive parts made from Zn-Al-Mg from protezione alla corrosione (rivestimento di Zn) esposti vehicles that had been driven for three to five years in a test ambientali di corrosione accelerata. Sono state Canada to examine corrosion resistance capabilities when anche prelevate parti ricoperte con Zn-Al-Mg da veicoli exposed to actual vehicle environment conditions. We guidati da 3 a 5 anni in Canada, con lo scopo di valutare found that Zn-Al-Mg exhibited better corrosion resistance le prestazioni di resistenza alla corrosione quando sono than post-Zn-coated material, even at portions where the esposte alle condizioni ambientali di esercizio. Gli autori steel substrate was exposed (along cut edges and in bent hanno trovato che il rivestimento Zn-Al-Mg mostra migliore or spot-welded portions).
    [Show full text]
  • FED-STD-297E T SUPERSEDING FED-STD-297D October 1
    Downloaded from http://www.everyspec.com FED-STD-297E t SUPERSEDING FED-STD-297D October 1. 1985 FEDERAL STANDARD RUSTPROOFINGOF COMMERCIAL (NONTACZICAL)VEHICLES ~. Approved fo~ pu~l.icrelease: distribution is unlimited. ,,- -~ -. Downloaded from http://www.everyspec.com FED-STB297E GENERAL SERVICES AIMINISTRATION Washington. D- C. 20301 Rustproofing of Commercial (Nontactical)Vehicles. 1. This Federal Standard is approved by the Commissioner, Federal Supply Service. General Services Administration. for the use of all Federal Agencies. 2. Beneficial comments (recommendations?additions. deletions) ~d my pertinent data which may be of use in improving this document should be addressed to: US Army Tank-Automotive Conmand, A’I’TN:AMSTA-UED, Warren. MI 48397-5000. by using the self-addressed Standardization Document Improvement proposal (.DD~orm 1426) appearti at the end ‘f ‘his ‘ocment ‘r W letter- ii Downloaded from http://www.everyspec.com FRD=STD-Z9’7E FOREWRD This standard establishes requirements for rustproofing of commercial. nontactical, self-propelled and towed vehicles procured for Government use. ------ iii Downloaded from http://www.everyspec.com FED-STW297E Paragraph 1.. SCOPE -------------- ------- 1 2. REFERENCEDDOCUMENTS . ---- ------- 2 2.1 Issues of documents . ---’ ------ 2 2.1.1 Government documents . - - - - . - - - 2 2.1.2 Other Government documents . - . - - -’- 2 3. DEFINITIONS ----------- ------ 3 4. GENERAL REQUIREMENTS .’----- ------- 4 4.1 I?ustproofing---------- ------- 4 .4.2 Identification -------- -------- 4 4.3 Materials ---------- --” ------ 4 4.4 Instructions . ---- -------- 4-5 4.5 Contractor inspection system . - . 5 4.6 Workmanship ---------- ------- 5 5. DETAILED ------------ ------- 5 5.1 Application equipment - . - . - - . - - - - 5 5.1-1 Spray gun ---------- -------- 5 5.1.2 Wands ------------- ------” 6 5.1.3 Spray nozzles . .. ---- -------- 6 5.2 Application procedure .
    [Show full text]
  • Selder & Company Ab
    Page 1 of 3 SELDER & COMPANY AB WORK MANUAL FOR RUSTPROOFING OIL www.selder.com 23.3.2021 The work differs significantly from that with other rustproofing oils. READ CAREFULLY FOR A GOOD RESULT. TABLE OF CONTENTS CLEAN, NON-CORRODED METAL SURFACES TO BE PAINTED .............................................................. 1 CORRODED (RUSTED) METAL SURFACES, TREATMENT WITH OIL AT ROOM TEMPERATURE ................ 1 LINSEED OIL BURNING OF IRON AND STEEL .......................................................................................... 2 MAINTENANCE ....................................................................................................................................... 2 GENERAL................................................................................................................................................. 2 WORKER PROTECTION ........................................................................................................................... 3 SAFETY ..................................................................................................................................................... 3 CLEAN, NON-CORRODED METAL SURFACES TO BE PAINTED are automatically rustproofed by painting with Selder's linseed oil paints. Half of them is a binder which has the same composition and properties as RUSTPROOFING OIL. CORRODED (RUSTED) METAL SURFACES, TREATMENT WITH OIL AT ROOM TEMPERATURE Remove loose rust, paint residue, grease, lichens, algae, etc. The surface can be burned off with a blow torch,
    [Show full text]
  • Circular of the Bureau of Standards No. 80: Protective Metallic Coatings For
    DEPARTMENT OF COMMERCE Circular Bureau of Standards protective metallic coatings for the RUSTPROOFING OF IRON AND STEEL DEPARTMENT OF COMMERCE Circular OF THE Bureau of Standards S. W. STRATTON, Director No. 80 PROTECTIVE METALLIC COATINGS FOR THE RUSTPROOFING OF IRON AND STEEL ISSUED OCTOBER 4, 1919 PRICE, 10 CENTS Sold only by the Superintendent of Documents, Government Printing Office Washington, D. C. WASHINGTON GOVERNMENT PRINTING OFFICE 1919 ) 1 PROTECTIVE METALLIC COATINGS FOR THE RUSTPROOFING OF IRON AND STEEL CONTENTS Page I. Introduction 4 1. Nature of corrosion 4 2 . Principles underlying methods of prevention of corrosion 4 II. Types of coatings and methods of application 6 1. Metallic coatings 6 () Zinc 6 Hot dipping, sherardizing, plating, etc 6 Comparison of coatings 6 () Aluminum 7 (c) Soft, fusible metals 8 Tin, lead, and their alloys 8 (d) Hard metals 8 Copper, nickel, cobalt, and brass 8 2. Oxides and salts of iron 9 (a) Oxides 9 Bower-Barff type 9 Heating with oil, etc 10 ** “ Etching (“ Browning, Bluing, ” etc.) 10 Niter bath n Temper colors 11 Hot oxidizing solutions 1 Miscellaneous n (&) Salts 12 Parker or Coslett process 12 III. Microstructure 12 1. Theoretical microstructure of zinc coatings 12 2. Variations in microstructure of commercial coatings 14 (a) Hot-dipped material 14 ( b ) Sherardized coatings 16 (c) Sprayed coatings 16 ( d Plated zinc coatings 17 3. Significance of structure of coatings 18 IV. Preparation of the surface before coating, and accompanying effects upon the mechanical properties of the steel 20 V. Methods of testing coatings 22 1. Description of methods 22 () Stripping tests 23 () Salt spray 24 2.
    [Show full text]
  • Corrosion Protection Textbook
    Corrosion Protection Textbook Version:3.3 ©2001-2014Inter-IndustryConferenceOnAutoCollisionRepair CPS01-STMAN1-E Thispageisintentionallyleftblank. Textbook CorrosionProtection Contents Introduction..............................................................................................................................7 ObligationsToTheCustomerAndLiability.......................................................................... 7 Module1-CorrosionOriginsAndPrevention.......................................................................13 CausesOfCorrosion...........................................................................................................13 OEMCorrosionProtection..................................................................................................14 PreventingCorrosionDuringRepairs..................................................................................19 ModuleWrap-Up............................................................................................................... 26 Module2-CorrosionProtectionDuringRepairs................................................................... 29 Cleaning..............................................................................................................................29 PartPreparations................................................................................................................. 31 JoiningSurfaces.................................................................................................................. 33 Primers................................................................................................................................36
    [Show full text]
  • Letter Circular 192: Corrosion Resistance of Iron and Steel
    • - - Letter HWG : MGL : LTQ DEPARTMENT OF COMMERCE " " ' \ BDREAU- -Op’S OTfDARDS Circular : •..- ~ ™ • 1&2 ’ ' • ' v • 7 • April 1336 ' • v ; yc-^s. ' COFRQSIQN- RESISTANCE ~CF "IRON AND STEEL . ; : • • •. V ; -a; . The /Lett-er- C.iTC.uliars are designed to answer .specific in- ; quiries and at the same.; t irae- to-'obylate .the necessity "for pre^ paratlon.-of a large number. of letters- on. .the same, subject There Is" no guarantee- it hat .the. 'Information .given In- the Letter r Circulars- ls , correct except as of .the date of issue,. - ilat-erlal of a permanent value appears in- the printed publications of the-, ^ -j ;.- • Bureah. r f 1 r:- 5 r Iv-rmc v. -. Letter. Circulars are not' available sin' the Government Print- ing Office, and the supply at the Bureau of -Standards Is- -limited Many inquiries' are- received- by- this. Bureau -in (regard to the resistance to corrosion of- ."cas.t iron, and of . steel, wrought iron, commercially pure-/ open-hearth iron. 'and copper-bearing -. iron or* steel in sheet - -pipe;,; wir.e-;..;andrsther forms both bare , : . and zinc : coat ed dr otherwise, trust' propled-t, : : Some inquirers request opinions on the suitability of specif - in makes or brands of these -materials , for specific uses. "It -is not the policy .of the -.Bur eau to recommend or. -de- cry specific mates or brands .of any article; Its .tests and. investi gallons deal with ..types of material, not- with, the merits or demerits of a .particular .maker* s product. ;--Thls . Letter - Circular is prepared to put those making such inquiries on types of material in touch with -published data -and opinions on the 'subject.
    [Show full text]
  • Reduction of Cavitation Damage by Surface Treatment
    UNIVERSITY OF MINNESOTA ST. ANTHONY FALLS HYDRAULIC LABORATORY Project Report No. 81 Reduction of Cavitation Damage by Surface Treatment by JOHN F. RIPKEN Distribution 01 this Document is Unlimited Prepared for DAVID TAYLOR MODEL BASIN Department of the Navy Washington, D.C. under Bureau of Ships General Hydromechanics Research Program S-R009-01-01 Office of Naval Research Contract Nonr 710(64) July 1966 Minneapolis, Minnesota Reproduction in whole or in part is permitted for any purpose of the United States Government ~~-~~~~~~~~~~~~~~~~~~~~~~~~----------- ------- -------- --- , .(. I ' ABSTRACT It was rationalized, with limited supporting evidence, that 1 I ~. I most damage due to cavitation stems from cavities which are the consequence of outgassing nuclei growing from fissures in a body's surface. To minimize this damage, it was proposed that body surfaces be treated to reduce the number and activity of these surface faults. Vibratory cavitation damage tests of specimens treated to seal, neutralize, or compress the test surface indicated that these protective measures were inadequate for the severe conditions of a vibratory test. Light shot peening of a work hardening stainless steel prior to cavitation exposure substantially reduced the normal rate of cavitation erosion. i I' < I iii ---------------------------------- ------------ CONTENTS Page Abstract • • • • • • • • II " ,. II ,. • • 'iI'.''''''''·''·- iii List of Illustrations • • • • • ,., .. ", .... "" vii I. INTRODUCTION • • , •• , ••••• ".'.11.·,."." 1 II. THE OUTGASSING OF METALLIC SURFACES AND THE RELATION TO CAVITATION . ,. ,. ,. ,. ,. , • , ,. ,. • ,. ,. , ,. • • .. , • II • • 2 III. SURFACE TREATMENT FOR SUPPRESSION OF OUTGASSING • ,. ,. ,. ; II .. 9 A. General Considerations •• • • • • • • • • • • • • • 9 B. Applied Non-Metallic Films ••••• • • • • • • 10 C. Chemical Treatment of Metallic Surfaces • • • • • 11 D. Physical Treatment of Metallic Surfaces • • -. • • 11 E. Applied Metallic Coatings of Metallic Substrate • 13 IV.
    [Show full text]
  • A Guide to Corrosion Protection
    An analysis of corrosion- A Guide To Corrosion related issues for passenger car and light Protection truck underbody structural components. Auto/Steel Partnership A GUIDE TO CORROSION PROTECTION For Passenger Car and Light Truck Underbody Structural Components Prepared by Light Truck Frame Project Team Auto/Steel Partnership 2000 Town Center, Suite 320 Southfield, Michigan 48075-1123 1999 The following companies are members of the Auto/Steel Partnership: AK Steel Corporation Bethlehem Steel Corporation DaimlerChrysler Corporation Dofasco Inc. Ford Motor Company General Motors Corporation Ispat Inland Inc. LTV Steel Company National Steel Corporation Rouge Steel Company Stelco Inc. U.S. Steel Group, a Unit of USX Corporation WCI Steel, Inc. Weirton Steel Corporation This publication was prepared by: Auto/Steel Partnership Light Truck Frame Project Team 2000 Town Center, Suite 320 Southfield, Michigan, 48075-1123 First Edition, December 1999 This publication is for general information only. The material contained herein should not be used without first securing competent advice with respect to its suitability for any given application. This publication is not intended as a representation or warranty on the part of Auto/Steel Partnership - or any other person named herein - that the information is suitable for any general or particular use or freedom from infringement of any patent or patents. Anyone making use of the information assumes all liability arising from such use. For more information or additional copies of this publication, please contact the Auto/Steel Partnership, 2000 Town Center, Suite 320, Southfield, MI 48075-1123 or phone: 248-945-7777, fax: 248-356-8511, web site: www.a-sp.org Copyright 1999 Auto/Steel Partnership.
    [Show full text]
  • Alsheettm Alsheet
    www.nipponsteel.com Steel Sheet ALSHEET TM Hot-dip aluminum-coated steel sheets ALSHEETTM 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan U034en_02_202004pU034en_02_202004f Tel: +81-3-6867-4111 © 2019, 2020 NIPPON STEEL CORPORATION Introduction Manufacturing Process Overall manufacturing Blast furnace TM process ALSHEET is a cold-rolled steel that has been hot-dipped in an aluminum/silicon alloy. It Acid Pickling offers the attractive surface of processed steel sheet that simultaneously affords some of Converter the features of aluminum, such as resistance to corrosion, attractive appearance, coupled Cold Rolling with superior heat resistance and heat reflection, cold-rolled steel’s mechanical attributes Continuous Casting and other physical characteristics. Hot-dip We have been manufacturing hot-dip aluminum-coated steel sheets under the name Hot Rolling aluminum plating “ALSHEETTM” since July 1961, and it has been widely adopted thanks to its superior features, such as for vehicle mufflers (silencers), toasters, and gas cookers. In recent years, there have been calls for the development of materials to succeed Cooling equipment stainless steel sheets to cope with exhaust gas restrictions, and inexpensive materials Post-Processing TM in order to cut costs, and accordingly the demand for ALSHEET with improved heat Hot-dip Aluminum Plating The quality and shape of the aluminum- resistance performance has grown in these fields as well. Process coated sheet are improved by the We have recently developed further improvements to our products in terms of heat <in order of process> skin pass and tension leveler, and post-processing is applied to the add resistance, strength at high temperature, colorfastness, and corrosion resistance, and corrosion resistance and enhance paint have extended our product lineup to meet the ever-diversifying needs of today’s market.
    [Show full text]
  • Notice of Solicitation Gs-2020-4 for the Furnishing
    NOTICE OF SOLICITATION GS-2020-4 FOR THE FURNISHING AND DELIVERY OF One (1) 4-Wheel Drive 18,000 lb GVWR Cab, Utility Body and Accessories; AND/OR One (1) 37,600 lb GVWR Cab and Chassis with (8) Cubic Yard Dump Body; AND/OR Three (3) 16K Tilt Deck Equipment Trailers; AND/OR One (1) Rubber Track Open Cab Excavator January 2020 CONTENTS NOTICE OF SOLICITATION ....................................................................................................... 1 OFFER ............................................................................................................................................ 2 SCOPE OF WORK AND AWARD ............................................................................................... 7 CERTIFICATION OF COMPLIANCE FOR FINAL PAYMENT ............................................. 15 SPECIFICATIONS ....................................................................................................................... 16 GENERAL TERMS AND CONDITIONS FOR GOODS AND SERVICES ............................. 26 NOTICE OF SOLICITATION SEALED OFFERS will be received up to and publicly opened at 2:00 p.m. (Hawaiʻi Standard Time) on Thursday, February 06, 2020, at the Department of Water Office of the County of Kauaʻi (“Department of Water” or “Department”), 4398 Pua Loke Street, Līhuʻe, Kauaʻi, Hawaiʻi, for the furnishing and delivery of GS-2020-4 One (1) 4-Wheel Drive 18,000 lb GVWR Cab, Utility Body and Accessories; AND/OR One (1) 37,600 lb GVWR Cab and Chassis with (8) Cubic Yard Dump Body; AND/OR Three (3)
    [Show full text]