MMG PUBLICATIONS – 2012

1. Ravi Shankar, S. Ramya and U. Kamachi Mudali, Molten salt corrosion of high density graphite and partially stabilized zirconia coated high density graphite in molten LiCl-KCl salt, Jagadeesh Sure, Ceramics International , 38 (2012) 2803-2812. 2. Pradeep Kumar Samantaroy, Girija Suresh and U. Kamachi Mudali, Effect of heat treatment on corrosion behavior of Alloy 690 and Alloy 693 in simulated nuclear high level waste medium , Corrosion, 68 (2012) 046001:1-13. 3. R. P. George, P. Muraleedharan, S. Tamilvani, J. Brijitta, B. V. R. Tata and U. Kamachi Mudali. Inhibition of manganese oxidising bacterial adhesion on pretreated stainless steel surfaces. 2011. Surface Engineering, 28 (2012) 230-234. 4. Lipika R. Bairi, R.P. George and U. Kamachi Mudali, Microbially induced corrosion of D9 stainless steel- zirconium metal waste form alloy under simulated geological repository environment, Corrosion Science , 61 (2012) 19-27. 5. Jagadeesh Sure, A. Ravi Shankar, B.N. Upadhyay and U. Kamachi Mudali, Microstructural

characterization of plasma sprayed Al 2O3-40wt% TiO 2 coatings on high density graphite with different post treatments, Surface and Coatings Technology , 206 (2012) 4741–4749. 6. Jagadeesh Sure, A. Ravi Shankar, S. Ramya and U. Kamachi Mudali, Molten salt corrosion of high density graphite and partially stabilized zirconia coated high density graphite in molten LiCl-KCl salt, Ceramics International, 38 (2012) 2803-2812. 7. A. Ravi Shankar, S. Niyanth, M. Vasudevan, and U. Kamachi Mudali, Microstructural characterization and corrosion behaviour of activated flux (A-GTAW) and multipass (M- GTAW) stainless steel weld joints in nitric acid, Corrosion NACE, 68 (2012) 762-773. 8. Ruth Nithila, R.P. George, B. Anandkumar and U. Kamachi Mudali, Effect of applied potential to control bacterial adhesion on condenser material of nuclear power plants, Transactions of Indian Institute of Metals, 65 (2012) 251-258. 9. N. Sivai Bharasi, K. Thyagarajan, H. Shaikh, A.K. Balamurugan, S. Venugopal, A. Moitra, M. Radhika, S. Kalavathy, S. Chandramouli, G. Sasikala, A.K. Tyagi, R.K. Dayal, and K.K. Rajan, Evaluation of microstructural, mechanical properties and corrosion behaviour of AISI type 316LN stainless steel and modified 9Cr-1Mo steel exposed in a dynamic bi-metallic sodium loop at 798 K for 16000 hours, Metallurgical and Materials Transactions A, 43A (2012) 561-571. 10. K. Indira, S. Ningshen, U. Kamachi Mudali and N. Rajendran, Effect of anodization parameters on the structural morphology of the anodized Ti in fluoride containing electrolytes, Materials characterization, 71 (2012) 58-65. 11. Maneesha Mishra, P. Kuppusami, Akash Singh, S. Ramya, V.Sivasubramanian and E. Mohandas, Phase evolution in zirconia thin films prepared by pulsed laser deposition, Applied Surface Science, 258 (2012) 5157-5165. 12. M. Rajalakshmi, S. Sohila, S. Ramya, R. Divakar, Chanchal Ghosh and S. Kalavathi, Blue green and UV emitting ZnO nanoparticles synthesized through a non-aqueous route, Optical Materials, 34 (2012) 1241-1245. 13. P. Kuppusami, T. Elangovan, S. Murugesan, R. Thirumurugesan, Shabana Khan, Rani P. Georg e, R. Ramaseshan, R. Divakar, E. Mohandas and D. Mangalaraj, Microstructural, nanomechanical and antibacterial properties of magnetron sputtered nanocomposite thin films of CrN/Cu, Surface Engineering , 28 (2012) 134-140. 14. J. Jayapriya, Judy Gopal, V. Ramamurthy, U. Kamachi Mudali and Baldev Raj, Preparation and characterization of biocompatible carbon electrodes, Composites; Part B-Engineering , 43 (2012) 1329-1335. 15. Vinita Vishwakarma, R.P. George, D. Ramachandran, M. Menaka, D. Sharath, U. Kamachi Mudali and B. Venkataraman, Thermographic evaluation studies of biodeterioration of modified concrete in seawater environments, Concrete Research Letters, 3, (2012) 426- 438. 16. Lipika Rani Bairi, G. Pannerselvam and U. Kamachi Mudali, High temperature phase stability and microstructural characterization of D9 stainless steel – zirconium metal waste form alloy, Transaction of Indian Institute of Metals, 65 (2012) 333-341. 17. Lipika Rani Bairi, S. Ningshen, U. Kamachi Mudali and Baldev Raj, Corrosion investigations on metal waste form of titanium modified 316 stainless steel -zirconium alloys in simulated ground water medium, Corrosion NACE, 68 (2012) 784-792. 18. N. Parvathavarthini, U. Kamachi Mudali, Lilyana Nenova, Chavar Andreev and Baldev Raj, Sensitization and intergranular behavior of high nitrogen type 304LN stainless steels for reprocessing and waste management applications, Metallurgical and Materials Transactions A , 43 A (2012) 2069-2084. 19. M.G. Pujar, T. Sakthivel, U. Kamachi Mudali and K. Laha, Effect of chemical composition on uniform and pitting corrosion of 9Cr-1Mo ferritic sttels, Journal of Corrosion Science and Engineering , 1 (2012) 1-15. 20. R.P. George, Vinita Vishwakarma, S.S. Samal and U. Kamachi Mudali, Current understanding and future approaches for controlling microbially influenced concrete corrosion: a review, Concrete Research Letters , 3 (2012) 491-506. 21. J. Jayaraj, A. Ravishankar and U. Kamachi Mudali, Electrochemical and passive characterization of a beta type Ti45Zr38Al17 cast rod in nitric acid medium, Electrochimica Acta, 85 (2012) 210-219. 22. Girija Suresh, U. Kamachi Mudali, Chavdar Andreev, Lili Ninova and Baldev Raj, Corrosion behaviour of high nitrogen stainless steel in nitric acid and chloride environment, Corrosion NACE, 68 (2012) 922-931. 23. C. Arunchandran, S. Ramya, R.P. George and U. Kamachi Mudali, Self healing corrosion

resistant coatings based on inhibitor loaded TiO 2 nanocontainers, Journal of the Electrochemical Society, 159 (2012) C552-C559. 24. Ruth Nithila, N. Padhy, R.P. George, U. Kamachi Mudali and R.K. Dayal, Studies on effect of applied potential on bacterial adhesion forces on Atomic Force Microscopy, Journal of Advanced Microscopy Research, 7 (2012) 123-135. 25. Rajini P. Antony, Tom Mathews, P.K. Ajikumar, Nanda Gopala Krishna, S. Dash and A.K.

Tyagi, Electrochemically synthesized visible light absorbing vertically aligned N-doped TiO 2 nanotube array films, Materials Research Bulletin , 47 (2012) 4491-4497. 26. T. Elangovan, R.P. George, P. Kuppusami, D. Mangalraj, Santhanu Bera, E. Mohandas and Dae-Eun Kim, Development of CrN/Cu nanocomposite coating on Ti-modified stainless steel for antibacterial activity against pseudomonas aeruginosa, Biofouling , 28 (2012) 779- 787. 27. D. Gopi, J. Indira, M. Sekar, L. Kavitha and U. Kamachi Mudali, Spectroscopic investigations of hydroxyapatite nanoparticles synthesized by novel hollow spheres guided and an ultrasonic assisted method, Journal of Spectrochimica Acta Part A: Molecular and Bimolecular Spectroscopy, 93 (2012) 131–134

28. A Comparison of Creep Rupture Strength of Ferritic/Austenitic Dissimilar Weld Joints of Different Grades of Cr-Mo Ferritic Steels, K. Laha, K.S. Chandravathi, P. Parameswaran, Sunil Goyal and M.D. Mathew, Metall. Mater. Trans. 43A (2012) 1174-1186.

29. Evaluation of the effect of nitrogen on creep properties of 316LN stainless steel from impression creep tests, Naveena, V.D. Vijayanand, V. Ganesan, K. Laha and M.D. Mathew, Mater. Sci. Engg . 552 (2012) 112-118.

30. Influence of flowing sodium on creep deformation and rupture behaviour of 316L (N) austenitic stainless steel, S. Ravi, K. Laha, M.D. Mathew, S. Vijayaraghavan, M. Shanmugavel, K.K. Rajan and T. Jayakumar, J. Nucl. Mater. 427 (2012) 174-180. 31. Influence of strain rate and temperature on tensile properties and flow behaviour of a reduced activation ferritic-martensitic steel, J. Vanaja, K. Laha, Shiju Sam, M. Nandagopal, S. Panneer Selvi, M.D. Mathew, T. Jayakumar and E. Rajendra Kumar, J. Nucl. Mater. 424 (2012) 116-122. 32. Improving creep strength of 316LN stainless steel by alloying with nitrogen, M.D. Mathew, K. Laha and V. Ganesan, Mater. Sci. Engg. A535 (2012) 76-83. 33. Effect of temperature and strain rate on tensile serrated flow behaviour of Hastelloy-X, T. Sakthivel, K. Laha, M. Nandagopal, K.S. Chandravathi, S. Panneer Selvi, M.D. Mathew, Mater. Sci. Engg. A534 (2012) 580-587.

34. Effect of Microstructure on the Critical Strain to onset of Serrated Flow in Modified 9Cr- 1Mo Steel, K.S. Chandravathi, K. Laha, P. Parameswaran and M.D. Mathew, Intl. J Press. Vess. Pip. 89 (2012) 162-169.

35. Isothermal and thermomechanical fatigue studies on a modified 9Cr-1Mo ferritic martensitic steel, A. Nagesha, R. Kannan, G.V.S. Sastry, R. Sandhya, Vakil Singh, K. Bhanu Sankara Rao and M.D. Mathew, Mater. Sci. Engg . A 554 (2012) 95-104.

36. Effect of tungsten and tantalum on low cycle fatigue behavior of reduced activation ferritic/martensitic steels for advanced reactor systems, Vani Shankar, K. Mariappan, A. Nagesha, G.V.P. Reddy, R. Sandhya, M. D. Mathew and T. Jayakumar, Int. J. Fusion Engg. Des. 87 (2012) 318- 324. 37. Low cycle fatigue studies on Inconel 625 ammonia cracker tubes, A. Nagesha, P. Parameswaran, Niraj Kumar, R. Sandhya and M.D. Mathew, Mater. High Temp. 29 (2012) 49-53. 38. Low cycle fatigue and thermo-mechanical fatigue behavior of modified 9Cr–1Mo ferritic steel at elevated temperatures, Vani Shankar, R. Sandhya, M.D. Mathew and H.-J. Christ, J. Nucl. Mater. 420 (2012) 23-30.

39. Low Cycle Fatigue Life Prediction of 316 L(N) Stainless Steel Based on Cyclic Elasto-Plastic Response, Samir Chandra Roy, Sunil Goyal, R. Sandhya and S. K. Ray, Nucl . Engg. Des . 253 (2012) 219-225.

40. Evaluation of the Effect of Dynamic Sodium on the Low Cycle Fatigue Properties of 316L(N) Stainless Steel Base and Weld Joints, V. Ganesan, R. Kannan, K. Mariappan, G. Sukumaran, R. Sandhya and K. Bhanu Sankara Rao, High Temp. Mater. Proc . 31 (2012) 243–249.

41. Dynamic Strain Ageing in Inconel ® Alloy 783 Under Tension and Low Cycle Fatigue, A. Nagesha, Sunil Goyal, M. Nandagopal, P. Parameswaran, R. Sandhya, M.D. Mathew and Sarwan K. Mannan, Mater. Sci. Engg. 546 (2012) 34-39.

42. Comparative tensile flow and work hardening behaviour of thin section and forged thick section 9Cr-1Mo ferritic steel in the framework of Voce equation and Kocks-Mecking approach, B.K. Choudhary and D.P. Rao Palaparti, J. Nucl. Mater . 430 (2012) 72-81.

43. Long-term creep-rupture strength prediction for modified 9Cr-1Mo ferritic steel and type 316L(N) austenitic stainless steel, V.S. Srinivasan, B.K. Choudhary, M.D. Mathew and T. Jayakumar, Mater. High Temp. 29 (2012) 41-48.

44. Influence of temperature on tensile stress-strain and work hardening behaviour of forged thick section 9Cr-1Mo ferritic steel, D. P. Rao Palaparti, B.K. Choudhary and T. Jayakumar, Trans. Indian Inst. Met . 65 (2012) 413-423

45. Influence of strain rate and temperature on tensile stress-strain and work hardening behaviour of 9Cr-1Mo ferritic steel, D.P. Rao Palaparti, B.K. Choudhary, E. Isaac Samuel, V.S. Srinivasan and M.D. Mathew, Mater. Sci. Engg . A 538 (2012) 110-117.

46. Applicability of Kocks-Mecking approach for tensile work hardening in P9 steel, B.K. Choudhary, J. Christopher and E. Isaac Samuel, Mater. Sci. Technol . 28 (2012) 644-650. 47. Influence of processing route and section size on tensile properties of 9Cr-1Mo ferritic steel, B.K. Choudhary, High Temp. Mater. Proc . 31 (2012) 27-35.

48. Tensile stress–strain and work hardening behaviour of P9 steel for wrapper application in sodium cooled fast reactors, J. Christopher, B.K. Choudhary, E. Isaac Samuel, M.D. Mathew and T. Jayakumar, J. Nucl. Mater. 420 (2012) 583-590. 49. Effect of mean stress and stress amplitude on the ratcheting behaviour of 316LN stainless steel under dynamic strain aging regime, Aritra Sarkar, A. Nagesha, R. Sandhya and M.D Mathew, Mater. High Temp. 29 (2012) 351-358.

50. Micro indentation study on Cu 60 Zr 20 Ti 20 metallic glass Vincent, S;Joysurya Basu;Murty, BS;Jatin Bhatt; Materials Science and Engineering A 550 (2012) 160–166

51. Synthesis of novel Ru2C under high pressure-high temperature conditions N.R. Sanjay Kumar, N.V. Chandra Shekar, Sharat Chandra, Joysurya Basu, R. Divakar, P. Ch. Sahu Journal of Physics: Condensed Matter 24 (2012) 362202

52. Temperature X-ray diffraction studies zirconia thin films prepared by reactive pulsed laser deposition G. Ba lakrishnan, P. Kuppusami, S. Murugesan, E. Mohandas, D. Sastikumar Crystal Research and Technology 47 (2012) 4 15-422

53. Micro structure, crystal structure and mechanical properties the new ternary intermetallic alloy phase Zr2TiAl D. Sornadurai, V.S. Sastry, V. Thom as Paul, Roberta Flemming, Feby Jose, R. Ramaseshan, S. Dash Intermetallics 24 (2012) 89 – 94

54. Effect of temperature and strain rate on serrated flow behaviour Hastelloy X T. Sakthivel, K. Laha, M. Nandagopal, K.S. Chandravathi, P. Parameswaran, S. Panneer Selvi, M.D. Mathew, Sarwan K. Mannan Materials Science and Engineering A 534 (2012) 580 – 587

55. Tribological properties sputter deposited ZrN coatings on Titanium modified Austenitic stainless Steel Akash Singh, N. Kumar, P. Kuppusami, T.N. Prasanthi and P. Chandramohan, S. Dash, M.P. Srinivasan, E. Mohandas and A.K. Tyagi Wear 280-281 (2012) 22-27

56. Single-step growth dynamics core-shell GaN on Ga 2O3 freestanding nanoprotruded microbelts Prasana Sahoo, Joysurya Basu, Sandip Dhara, Hsin Fang, Chuan-Pu Liu, T. Ravindran, Sitaram Dash, Ashok Tyagi Journal of Materials Science 47 (2012) 3447-3453

57. Metastable Phase Transformation in Ti-5Ta-2Nb alloy and 304L Austenitic Stainless Steel under Explosive Cladding Conditions C. Sudha, T.N. Prasanthi, V. Thomas Paul, S. Saroja and M. Vijayalakshmi Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 43A (2012) 3596-3607 58. Dynamic strain ageing in Inconel ® Alloy 783 under tension and low cycle fatigue Nagesha, Sunil Goyal, M. Nandagopal, P. Parameswaran, R. Sandhya, M.D. Mathew, Sarwan K. Mannan Materials Science and Engineering: A 546 (2012) 34 – 39

59. Texture, Grain Boundaries, Defects and Location Substitutional Atoms in Cryo- Mechanically Processed Ti-5Ta-1.8Nb Alloy Arup Dasgupta, Joysurya Basu, P.K. Parida, B.H. Vadavadagi, S. Saroja, M. Vijayalakshmi, T. Jayakumar Materials Science Forum 702 - 703 (2012) 131-134

60. Characterization Al 2O3/ZrO 2 nano multilayer thin films prepared by pulsed laser deposition G. Balakrishnan, P. Kuppusami, S. Murugesan, C. Ghosh and R. Divakar, E. Mohandas, D. Sastikumar Materials Chemistry and Physics 133 (2012) 299 – 303

61. Investigation texture, grain boundaries, defects and location substitutional atoms in cryo-mechanically processed Ti5Ta1.8Nb alloy Arup Dasgupta, Jaysurya Basu, P K Parida, B H Vadavadagi, S Saroja, M Vijayalakshmi and T Jayakumar Materials Science Forum Vols. 702-703 (2012)

62. Effect processing routes on evolution texture heterogeneity in 2014 Aluminum alloy deformed by Equal Channel Analysis Pressing (ECAP) P. Venkalachalam, S.Roy, B. Ravisankar, V. Thomas Paul, M. Vijayalakshmi and S. Suvas Materials Science and Technology 28 (2012) 1445-1458

63. Role of nanocrystalline feed stock in the fribological behavior alumina deposited by detonation gum P.A. Manoj Kumar, A.S. Gandhi, M. Kamaraj, V. Thomas Paul, N. Kumar, A.K. Tyagi, International Journal of Refractory Metals and Hard Materials,35(2012) 108- 114

64. Investigations on the Effect Processing Routes on Microstructure and Mechanical properties 2014 Al alloy processed by Equal Channel Angular Pressing (ECAP) P. Venkatachalam, S.Ramesh Kumar, B. Ravisankar, V. Thomas Paul and M.Vijayalakshmi Transactions of Nonferrous Metals Society China, 20 (2012) 1822-1828

65. X-ray diffraction Rietveld analysis cold worked austenitic stainless steel S. Murugesan, P. Kuppusami, E. Mohandas, M. Vijayalakshmi Materials Letters 67 (2012) 173 – 176

66. A comparison creep rupture strength ferritic/austenitic dissimilar weld joints different grades Cr-Mo ferritic Steels K. Laha, K.S. Chandravathi, P. Parameswaran, Sunil Goyal, M.D. Mathew Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 43 (2012) 1174 – 1186

67. Phase evolution in Zirconia thin films prepared by pulsed laser deposition Maneesha Mishra, P. Kuppusami, Akash Singh, S. Ramya and V. Sivasubramanian, E. Mohandas Applied Surface Science 258 (2012) 5157-5165

68. The role processing routes on the evolution microstructure and texture heterogeneity during ECAP Al-Cu alloy Perumal Venkatachalam, Shibayan Roy, V. Thomas Paul, M. Vijayalakshmi, Balasubramanian Ravisankar, Satyam Suwas Materials Science Forum 702-703 (2012) 113 – 118

69. Microstructural, nanomechanical and antibacterial properties magnetron sputtered nanocomposite thin films CrN/Cu P. Kuppusami, T. Elangovan, S. Murugesan, R. Thirumurugesan, Shabana Khan, R.P.George, R. Ramaseshan, R. Divakar, E. Mohandas, D. Mangalaraj Surface Engineering 28 (2012) 134-140

70. Effect microstructure on the critical strain to onset serrated flow in modified 9Cr-1Mo Steel K.S. Chandravathi, K. Laha, P. Parameswaran, M.D. Mathew International Journal of Pressure Vessels and Piping 89 (2012) 162 – 169

71. A unified approach to phase and microstructural stability for Fe-ETM alloys through Miedema's model Sadhan Ghosh, Joysurya Basu, Divakar Ramachandran, E. Mohandas, M. Vijayalakshmi Intermetallics 23 (2012) 148-157

72. Development CrN/Cu Nanocomposite Coating on Ti-modified Stainless Steel for antibacterial activity against Pseudomonas aeruginosa T. Elangovan, Rani P. George, P. Kuppusami, D. Mangalaraj, Santhanu Bera, E. Mohandas, Dae-Eun Kim Biofouling : The journal of Bioadhesion and Biofilm Research 28 (2012) 779-787

73. Blue Green and UV emitting ZnO Nanoparticles Synthesized through a Non-aqueous Route Rajalakshmi, M;Sohila, S;Ramya, S;Divakar, R;Chanchal Ghosh;Kalavathi, S; Optical Materials, 34 (2012) 1241–1245

74. Low Cycle Fatigue studies on Inconel 625 Ammonia cracker tubes Nagesha, A;Parameswaran,P; Niraj Kumar; Sandhya,R; Mathew,MD; Materials at High Temperature 29 (2012) 49-53

75. Integrity assessment of the ferritic / austenitic dissimilarweld joint between intermediate heat exchanger and steam generator in fast reactor T. Jayakumar, K. Laha, K.S. Chandravathi, P. Parameswaran, Sunil Goyal, J. Ganesh Kumar, M.D. Mathew International Congress on Advances in Nuclear Power Plants (2012) 490 – 499

76. Microscopy studies on Oxide Dispersion Strengthened Steels Arup Dasgupta, R Divakar, Pradyumna Kumar Parida, Chanchal Ghosh, S Saroja, E Mohandas, M Vijayalakshmi, T Jayakumar and Baldev Raj Materials at High Temperatures 29 (2012) 49 – 53

77. A unified approach to phase and microstructural stability for Fe-ETM alloys through Miedema's model Sadhan Ghosh, Joysurya Basu, Divakar Ramachandran, E. Mohandas, M. Vijayalakshmi Intermetallics 23 (2012) 148-157

78. Electron Microscopy studies on Oxide Dispersion Strengthened Steels Arup Dasgupta, R Divakar, Pradyumna Kumar Parida, Chanchal Ghosh, S Saroja, E Mohandas, M Vijayalakshmi, T Jayakumar and Baldev Raj Springer as a book chapter Materials Challenges and Testing for Supply of Energy and Resources ISBN-10: 3642233473 | ISBN-13: 978-3642233470 | Publication Date: February 29, 2012 | Edition: 2012

79. Influence of re-solutionising treatment on the cyclic deformation behaviour of a service- exposed Inconel® 625 superalloy A. Nagesha, P. Parameswaran, Niraj Kumar, R. Sandhya, M.D. Mathew Springer as a book chapter Materials Challenges and Testing for Supply Energy and Resources ISBN-10: 3642233473 | ISBN-13: 978-3642233470 | Publication Date: February 29, 2012 | Edition: 2012

80. Electron Microscopy studies on Oxide Dispersion Strengthened Steels Arup Dasgupta, R. Divakar, Pradyumna Kumar Parida, Chanchal Ghosh, S Saroja, E. Mohandas, M. Vijayalakshmi, T.Jayakumar and Baldev Raj, Springer as a book chapter in Materials Challenges and Testing for Suly Energy and Resources ISBN-10:3642233473 , February 29, 2012

81. Tribological properties sputter deposited ZrN coatings on Titanium modified Austenitic Stainless Steel Akash Singh, N. Kumar, P. Kuusami, T.N. Prasanthi and P. Chandramohan, S.Dash, M.P. Srinivasan, E. Mohandas and A.K. Tyagi, Wear. 280-281 (2012) 22

82. Metastable Phase Transformation in Ti-5Ta-2Nb alloy and 304L Austenitic Stainless Steel under Explosive Cladding Conditions C. Sudha, T.N. Prasanthi, V. Thomas Paul, S. Saroja and M. Vijayalakshmi, Metall. Mater. Trans. A: Phys. Metall. and Mater. Sci., 43A (2012) 3596

83. Texture, Grain Boundaries, Defects and Location Substitutional Atoms in Cryo-Mechanically Processed Ti-5Ta-1.8Nb Alloy Arup Dasgupta, Joysurya Basu, P.K. Parida, B.H. Vadavadagi, S. Saroja, M.Vijayalakshmi, T. Jayakumar, Mater. Sci. Forum s., 702 - 703 (2012) 131 84. Restitution Prior-Austenite Grain Orientation by Microtexture Analysis Tempered Martensite structure in 9Cr-1Mo Ferritic Steel Manmath Kumar Dash, T. Karthikeyan, S. Saroja and M. Vijayalakshmi, Mater. Sci. Forum s., 702-703 (2012) 880

85. Common Region between Euler Subspace and Rodrigues Fundamental Zone for a Cubic Crystal and Orthotropy Sample Symmetry T. Karthikeyan, S. Saroja and M. Vijayalakshmi, Mater. Sci. Forum, s. 702-703 (2012) 544

86. Investigation texture, grain boundaries, defects and location substitutional atoms in cryo- mechanically processed Ti5Ta1.8Nb alloy Arup Dasgupta, Jaysurya Basu, P K Parida, B. H. Vadavadagi, S. Saroja, M. Vijayalakshmi and T. Jayakumar, Mater. Sci. Forum s., 702-703 (2012)

87. Ti-5Ta-1.8Nb – An advanced Structural Material for High Performance inAggressive Oxidising Environments S. Saroja, M. Vijayalakshmi and Baldev Raj, Springer - Trans. IIM ., 65(2012) 111

88. Measurement and Modelling High Temperature Thermodynamic Properties URh3 alloy Arun Kumar Rai, Haraprasanna Tripathy, B. Jeya Ganesh and S. Raju, J. Nucl. Mater., 427 (2012) 378.

89. Creep deformation and rupture behaviour 9Cr –IW-0.2V-0.06Ta Reduced Activation Ferritic – Martensitic Steel. J.Vanaja, K.Laha, R.Mythili, K.S.Chadravathi, S.Saroja, M.D.Mathew, Mater. Sci. and Engg. A, 533 (2012) 17

90. Efficient Photo catalytic Hydrogen Generation by Pt Modified TiO2 Nanotubes Fabricated by Rapid Breakdown Anodization Rajini P Antony, Tom Mathews, C. Ramesh, N. Murugesan, Arup Dasgupta, SK Dhara, S .Dash, AK Tyagi , Int. J. Hydrogen Energy, 37, Iss.10 (2012) 8268

91. Metastable Phase Transformation in Ti-5Ta-2Nb alloy and 304L austenitic stainless steel under explosive cladding conditions. Metallurgical and Materials C .Sudha, T .N. Prasanthi, V. T. Paul, S. Saroja, M.Vijayalakshmi, Phys. Metall. Mater. Sci., 43A (2012) 3596

92. Thermal Properties Of Nanofluids J. Philip and P.D.Shima, Adv. Colloid Interface Sci. 183–184 (2012) 30

93. Role of surface charge, morphology, and adsorbed moieties on thermal conductivity enhancement of nanofluids S. A. Angayarkanni and J. Philip, Al. Phys. Lett., 101 (2012) 173113

94. Thermogelling Properties of Triblock-Copolymers in Presence of hydrophilic Fe3O4 Nanoparticles and surfactants Joy Nambam and J. Philip, Langmuir, 28 (2012) 12044

95. Size distribution of magnetic iron oxide nanoparticles using Warren-Averbach XRD analysis S.Mahadevan, Gnanaprakash, J.Philip, BPC Rao, T.Jayakumar, J. Phys. Chem. of Solids, 73 (2012) 867 96. Nanofluid based optical sensor for rapid visual inspection of defects in ferromagnetic materials V. Mahendran and J. Philip, J. Appl. Phys. Lett., 100 (2012) 073104.

97. Effects of Interaction of Ionic and Non-Ionic Surfactants on Self Assembly of PEO-O-PEO Triblock Copolymer in Aqueous Solution Joy Shankar Nambam and J. Philip, J. Phys. Chem. B, 116 (2012) 1499

98. High temperature phase transformation studies in magnetite nanoparticles doped with Co 2+ ion S.S.Pati, S.Gopinath, G. Panneerselvam, M. P. Antony and J. Philip, J. Al. Phys., 112 (2012) 054320

99. The interaction, stability and response to an external stimulus of iron oxide nanoparticle–casein nanocomplexes Sangeetha and J. Philip, Colloids Surf., A, 406 (2012) 52

100. Comparison of light scattering from self assembled array of nanoparticle chains and macroscopic cylinders Junaid M. Laskar, S.Borbjosi, J. Philip and Baldev Raj, Opt. Commun., 285 (2012) 1242

101. Thermal conductivity and rheological behaviour of Al-alloy dispersed ethylene glycol based nanofluids Paul. G, Philip. J, Raj.B, Das.P.K, Manna. I, ASTM STP., 1567 (2012) 104

102. Nature of Alkali Used in the Co-Precipitation of Superparamagnetic Nanoparticles on Their Thermal Stability and the Properties of Ferrofluids S. Ayyaan, S. Kalyani and J. Philip, J. Nanofluids ., 1 (2012) 128

103. Optical Properties and Alications of Ferrofluids—A Review J Philip and Junaid M. Laskar, J. of Nanofluids ., 1 (2012) 3

104. Synthesis of stable magnetic nanofluids of different particle sizes T. Muthukumaran, G. Gnanaprakash and J. Philip, J. of nanofluids.,1 (2012) 85

105. Studies using force, hydrodynamic size and zeta potential measurements on complexation of Polymer and Surfactant on Emulsion interface Joy Shankar Nambam and J. Philip, Colloid Sci. Biotechnol., 1 (2012) 51

106. Real-time Detection of Pathogenic Bacteria using Infrared Thermography BB Lahiri, S.Bagavathiaan, Diya, S.Thomas and J. Philip, Infrared Phys. Technol., 55 (2012) 485

107. Measurement of Thermal Properties of UFe2 by Calorimetry and Modelling Using Debye- Gruneisen Quasi-harmonic Formalism, Arun Kumar Rai and S. Raju, Proc. National Conf. Thermal Analysis (Thermans 2012), BARC Mumbai Jan 31-Feb 4 (2012) 82

108. Diffusion of nitrogen in fcc-Fe and fcc-Ni lattices: Molecular dynamic simulations T.N. Prasanthi, C. Sudha, S. Saroja and M. Vijayalakshmi Proc. 11th Inter. Conf. High Nitrogen Steels, 27-29, Sep. 2012, Chennai, India, CL-21 (301-308)

109. Interdiffusion studies between Ti-5Ta-2Nb alloy and 304L austenitic stainlesssteel joined by explosive cladding process, C. Sudha, T.N. Prasanthi, S. Saroja and M. Vijayalakshmi Proc. T.T. Chen Honorary Symposium on Hydrometallurgy, Electrometallurgy and Materials Characterization , (Eds.) S. Wang et. al., John Wiley and Sons, USA, (2012) 717 110. B.P.C. Rao, “Magnetic flux leakage technique: basics”, Journal of Non Destructive Testing & Evaluation, Vol. 11, No. 3, pp. 7-17, 2012.

111. S. Thirunavukkarasu, B.P.C. Rao, A.K. Soni, S. S. Ahmed and T. Jayakumar, “Comparative performance of image fusion methodologies in eddy current testing”, Research Journal of Applied Sciences, Engineering and Technology, Maxwell Scientific Organization, Vol. 4, No. 24, pp. 5548- 5551, 2012.

112. M.M. Narayanan, S. Vaidyanathan, A. Kumar, C. B. Rao and T. Jayakumar, “Estimation of concentration of conductive dispersoids in a dielectric medium using eddy current testing”, Insight, Vol. 54, Iss. 9, pp. 1-4, 2012.

113. V. R. Singh, B. P. C. Rao, C. B. Rao, T. Jayakumar, J. Bhavrani, V. Bhaskar, B. Satyadev and Y. S. Rao, “Phased array ultrasonic probe nondestructive tesing of Zircaloy-4 sheets, Journal of Non Destructive testing & Evaluation, Vol. 11, No. 3, pp. 49-57, 2012.

114. H. Achar, B. Varghese, G.M.K. Chaitanya, S. Sosamma, M. Kasinathan, A. Kumar, C. B. Rao, N. Murali, T. Jayakumar and B. Srinivasan, “Transient response of Fabry-Perot filter based dynamic interrogator”, J. NDT & E, Vol. 10, Iss. 4, pp. 53-58, 2012.

115. B. Sasi, M. Cacciola, C. B. Rao, T. Jayakumar and B. Raj, “Hybrid signal processing approach for enhanced detection of defects in eddy current NDE”, Research in NDE, Research in NDE, doi:10.1080/09349847.2012.699608, 2012.

116. M. K. Sahai, B. Sasi, C. B. Rao and T. Jayakumar, “A study on magnetic Barkhausen emission using Monte Carlo simuation", Insight, Vol 54, No.5, pp. 262-266, 2012.

117. B. Sasi, S. Sosamma, C. B. Rao, R. Vijayashree, P. Kalyanasundaram and B. Raj, “Indirectly excited eddy current sensor”, Experimental Techniques, doi: 10.1111/j- 1567.2012.00829, 2012.

118. S. Thirunavukkarasu, B.P. C. Rao, S. S. Ahmed and T. Jayakumar, “Solution to the third eddy current benchmark problem of WFNDE centres”, Journal of Nondestructive testing Evaluation, Vol. 11, No. 2, pp. 42-46, 2012.

119. S. Ahmed, S. Thirunavukkarasu, B.P.C. Rao and T. Jayakumar, “ Competitive learning on cosine similarity method for classification of defects in two-layered metallic structures”, Studies in Applied Electromagnetics and Mechanics, Vol. 36, pp. 183-191, ISBN 978-1- 60750-967-7, 2012.

120. W. S. Singh, B.P.C. Rao, S. Thirunavukkarasu, S. Mahadevan, C.K. Mukhopadhyay, T. Jayakumar, “3-D finite element modeling of leakage magnetic fields from inclined cracks in carbon steel plates”, Studies in Applied Electromagnetics and Mechanics, Vol. 36, pp. 175-182, 2012.

121. W. S. Singh, B.P.C. Rao, C.K. Mukhopadhyay and T. Jayakumar, “Giant magneto-resistive sensor array for non-destructive detection of leakage magnetic flux from surface defects in ferromagnetic materials”, Proc. of International Conference on Sensors and Related Networks SENNET12, VIT University, India, January 19 - 21, pp. 71-73, 2012.

122. B.P.C. Rao, T. Jayakumar, S. Thirunavukkarasu, W. S. Singh, G.K. Sharma, A. Kumar and C. B. Rao, “Effective nondestructive imaging of defects in engineering components”, Proc. of 18th World Conference on Nondestructive Testing, April 16-20, 2012, Durban, South Africa.

123. A. Viswanath, B.P.C. Rao, S. Mahadevan, T. Jayakumar, “Quantitative estimation of strain induced α'- martensite in cold worked AISI type 304 stainless steel using GMR sensor”, Studies in Applied Electromagnetics and Mechanics, Vol. 36, pp. 100-107, 2012.

124. C.K. Mukhopadhyay, T. Jayakumar, B. Raj and S. Venugopal, “Statistical analysis of acoustic emission signals generated during turning of a metal matrix composite”, Jr. of the Brazilian Society of Mechanical Sciences and Engineering, Vol. XXXIV, pp 145-154, 2012.

125. C.K. Mukhopadhyay, G. Sasikala, T. Jayakumar and B. Raj, “Acoustic emission during fracture toughness tests of SA333 Gr.6 steel”, Engineering Fracture Mechanics, Vol. 96, pp.294-306, 2012.

126. J. Kumar, S. Punnose, C.K. Mukhopadhyay, T. Jayakumar and Vikas Kumar, “Acoustic emission during tensile deformation of smooth and notched specimens of near alpha titanium alloy”, Research in Nondestructive Evaluation (ASNT Journal) Vol. 23, pp.17–31, 2012.

127. S. R. Karthihan, T.M. Haridasan, C. Sanjeevi Raja, P. Palanichamy, C.K. Mukhopadhyay and P. Kalyanasundaram, “Damage evaluation in high temperature stainless steel components using non-destructive techniques”, Jr. of Pure and Applied Ultrasonics, Vol. 34, pp.3-9, 2012.

128. T. Jayakumar, S. Vaidyanathan, B. Sasi, P. Sukumar, T. Saravanan, B.P.C. Rao, K. Arunmuthu, A. Narayana, R.K. Chaube and A. V. R. Rao, Multi-NDE investigation of Zircaloy-4 rods for ensuring manufacturing quality, Book chapter 22, Advances in Manufacturing technology, University press (India) Pvt. Ltd, (Eds. B. Raj, T. Jayakumar, P. V. Sivaprasad, B.P.C. Rao and G. Sasikala), pp. 314-322, 2012.

129. B. Sasi, M. Cacciola, L. Udpa, B. P. C. Rao, T. Jayakumar and B. Raj, “Development of image fusion methodology for EC images using discrete wavelet transform”, NDT & E international, Vol. 51, pp. 51-57, 2012.

130. M. K. Sahai, B. Sasi, C. B. Rao and T. Jayakumar, “A study on magnetic Barhausen emission using Monte Carlo simulation”, Insight, Vol. 54, No. 5, pp. 262-266, 2012.

131. S. Mahadevan, S.P. Behera, G. Gnanaprakash, T. Jayakumar, J. Philip and B.P.C. Rao, “Size distribution of magnetic iron oxide nanoparticles using Warren–Averbach XRD analysis”, Journal of Physics and Chemistry of Solids, Vol. 73, pp. 867–872, 2012.

132. B.B. Lahiri, S. Bagavathiappan, Diya, S. Thomas and J. Philip, “Real-time detection of pathogenic bacteria using infrared thermography” Infrared Physics & Technology, Vol. 55, pp. 485–490, 2012.

133. W. S. Singh, B.P.C. Rao, S. Thirunavukkarasu and T. Jayakumar, “Flexible GMR sensor array for magnetic flux leakage testing of steel track ropes”, Journal of Sensors, Vol. 2012, Article ID 129074, 6 pages, 2012.

134. B.B. Lahiri, S. Bagavathiappan, T. Jayakumar and J. Philip, “Medical applications of infrared thermography: a review” Infrared Physics & Technology, Vol. 55, Iss. 4, pp. 221– 235, 2012.

135. M. Sivabharathy, P. Palanichamy, M. Vasudevan, P. Kalyanasundaram and K. Ramachandran, An experimental study of the thermal properties of modified 9Cr-1Mo steel, Defect and Diffusion Forum, Vol. 332, pp. 1-6, 2012.

136. P. Palanichamy, “Microstructural characterisation of nuclear materials by ultrasonics”, J. of Pure and Applied Ultrasonics, Vol. 34, Iss.2-3, pp. 31-40, 2012.

137. S. R. Karthihan, T.M. Haridasan, C. Sajnjeeviraja, P. Palanichamy, C.K. Mukhopadhyay and P. Kalyanasundaram, “Damage evaluation in high temperature stainless steel components using non-destructive techniques”, J. of Pure and Applied Ultrasonics, Vol. 34, Iss. 1, pp. 3-9, 2012.

138. B. B. Lahiri, S. Bagavathiappan, P. R. Resmi, J. Philip, T. Jayakumar and B. Raj, “Correlation between Phase contrast and defect features - A case study using lock-in thermography”, Infrared Physics & Technology, Vol. 55, pp. 191–199, 2012.

139. J. Kumar, S. Punnose, C.K. Mukhopadhyay, T. Jayakumar and V. Kumar, “Acoustic emission during tensile deformation of smooth and notched specimens of near alpha titanium alloy”, Research in Nondestructive Evaluation, Vol. 23, pp.17–31, 2012.

140. “Development of D9 Alloy Pressurized Capsules for In-Reactor Creep Experiments”, M. Muthuganesh, K.A.Gopal, S. Murugan, S. Venugopal and T.Jayakumar, International Conference on Characterization and Quality Control of Nuclear Fuels (CQCNF-2012), Feb 27-29, 2012, Hyderabad. 141. “Development of D9 - D9 weld joints”, P. K. Chaurasia, Rajesh Saxena, M. Muthuganesh, K. A. Gopal, S. Murugan, N. Raghu, Chittaranjan Das, S. Venugopal and T. Jayakumar, Report no.: IGC/MMG/IDEAS/IC/D9 - D9 weld/2012/1/Rev. 0, November 2012. 142. “Proposal for Irradiation of Compact High Temperature Reactor (CHTR) Materials in FBTR”, S. Murugan, K.A.Gopal, M. Muthuganesh, R. Divakar, V. Karthik, Jojo Joseph, S. Varatharajan, C.P.Reddy, S. Venugopal, T. Jayakumar, and G. Srinivasan (IGCAR team members), BARC/ IGC/ MMG/ CHTR/ 1, October 2012. 143. “Residual Life assessment of FBTR Grid Plate”, C.P.Reddy, G. Raghu Kumar, S. Murugan, S. Varatharajan, G. Srinivasan, Report no. ROMG/FBTR/S-RS-02/31400/TN- 869, Feb. 2012. 144. “Proposal for irradiation of Ferroboron capsule in FBTR”, S. Murugan, S. Raju, D. Sunil Kumar, S. Anthonysamy, C.P.Reddy. S. Clement Ravi Chandar, V. Rajan Babu, S. Varatharajan, R.S. Keshavamurthy, G. Srinivasan, IGCAR/TF-ASM/2011/ Report-3, January 2012 145. Finite Element Analysis of Spherical Indentation to study Pile-up/Sink-in phenomena in Steels and Experimental Validation, V. Karthik, P. Visweswaran, Anand Bhushan, D. Pawaskar, K.V. Kasiviswanathan, T. Jayakumar and Baldev Raj, International Journal of Mechanical Sciences , 54 (2012) pp 74 -83.