DOCSLIB.ORG

Serial Rapidio Development Platform (SRDP2) Schematic

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Serial Rapidio Development Platform (SRDP2) Schematic 1 2 3 4 5 6 7 F Serial RapidIO Gen2 Development Platform (SRDP2) F Page 1 - Title Sheet Page 2 - Block Diagram Page 3 - 80HCPS1848 Lanes 0-15 Page 4 - 80HCPS1848 Lanes 16-31 E Page 5 - 80HCPS1848 Lanes 32-47 E Page 6 - 80HCPS1848 Config Page 7 - 80HCPS1848 Power and Decoupling Page 8 - 80HCPS1848 Power and Ground Page 9 - 80HSPS1616 Lanes 0-15 Page 10 - 80HSPS1616 Config D Page 11 - 80HSPS1616Power and Ground D Page 12 - AMC-1 Connector Page 13 - AMC-2 Connector Page 14 - AMC-3 Connector Page 15 - AMC 1 & 2 Hotswap Controllers Page 16 - AMC 3 Hotswap Controller Page 17 - SMA Field C Page 18 - SFP Connectors C Page 19 - QSFP Connector Page 20 - INFINIBAND Connectors Page 21 - Clocking Page 22 - I2C and JTAG Interface Page 23 - ATX Power Page 24 - Voltage Regulators for 80HCPS1848 B Page 25 - Voltage Regulators for 80HSPS1616 B TITLE : TITLE SHEET A A SIZE DRAWING NUMBER : Version: DESIGNER : C LAST MODIFIED DATE : SHEET 1 OF 25 7-22-2010_16:46 1 2 3 4 5 6 7 1 2 3 4 5 6 7 Block Diagram F F SMA Connectors 4 TX pairs 4 RX pairs Lane 16 Port 4 Lane 0 Port 5 Lane 1 Port 6 Lane 2 Port 7 Lane 3 Lane 17 Port 8 Lane 32 Port 9 Lane 33 Port 10 Lane 34 Port 11 Lane 35 Lane 18 AMC Connector B+ Lane 19 E E Port 4 Lane 4 Port 5 Lane 5 Port 6 Lane 6 Lane 28 Port 7 Lane 7 Lane 29 Port 8 Lane 36 Lane 30 Infiniband Connector Port 9 Lane 37 Port 10 Lane 38 80HCPS1848 Lane 31 Port 11 Lane 39 S-RIO SWITCH AMC Connector B+ Lane 44 D Lane 45 D Port 4 Lane 20 Lane 46 Infiniband Connector Port 5 Lane 21 Port 6 Lane 22 Lane 47 Port 7 Lane 23 Port 8 Lane 8 Port 9 Lane 9 Port 10 Lane 10 Port 11 Lane 11 Lane 24 AMC Connector B+ Lane 25 Lane 26 QSFP Connector Lane 27 Lane 12 SFP Connector Lane 14 SFP Connector C Lane 40 Lane 41 Lane 42 Lane 43 C SMA Connectors Lane 15 Lane 14 Lane 13 Lane 12 4 TX pairs 4 RX pairs Lane 4 Lane 5 Lane 0 Infiniband Connector Lane 6 on security port Lane 7 80HSPS1616 Lane 1 S-RIO SWITCH B Lane 2 B Lane 8 Lane 9 Lane 3 Infiniband Connector Lane 10 Lane 11 TITLE : BLOCK DIAGRAM A A SIZE DRAWING NUMBER : Version: DESIGNER : C LAST MODIFIED DATE : SHEET 2 OF 25 7-22-2010_16:46 1 2 3 4 5 6 7 1 2 3 4 5 6 7 80HCPS1848 Lanes 0-15 F F C132 0.1U 3-C2,12-D2 SW_RX0_P C133 0.1U 3-C2,12-D2 SW_RX0_N C135 0.1U 3-C2,12-D2 SW_RX1_P C134 0.1U 3-C2,12-D2 SW_RX1_N C139 0.1U 3-C2,12-C2 SW_RX2_P C138 0.1U 3-C2,12-C2 SW_RX2_N C137 0.1U 3-C2,12-C2 SW_RX3_P C136 0.1U 3-C2,12-C2 SW_RX3_N U11 SW_STUB_RX0_P E16 B16 SW_TX0_P RX0P TX0P 3-C3,12-D2 SW_RX4_P C143 0.1U SW_STUB_RX0_N D16 A16 SW_TX0_N 3-B2,13-D2 RX0N TX0N 3-C3,12-D2 SW_STUB_RX1_P E15 B15 SW_TX1_P RX1P TX1P 3-C3,12-C2 SW_RX4_N C142 0.1U SW_STUB_RX1_N D15 A15 SW_TX1_N 3-B2,13-D2 RX1N TX1N 3-C3,12-C2 SW_STUB_RX2_P E13 B13 SW_TX2_P RX2P TX2P 3-C3,12-C2 SW_RX5_P C141 0.1U SW_STUB_RX2_N D13 A13 SW_TX2_N 3-B2,13-D2 RX2N TX2N 3-C3,12-C2 SW_STUB_RX3_P E12 B12 SW_TX3_P RX3P TX3P 3-C3,12-C2 SW_RX5_N C140 0.1U SW_STUB_RX3_N D12 A12 SW_TX3_N 3-B2,13-D2 RX3N TX3N 3-C3,12-C2 SW_RX6_P C168 0.1U SW_STUB_RX4_P N5 N2 SW_TX4_P 3-B2,13-C2 RX4P TX4P 3-B3,13-D2 SW_STUB_RX4_N N4 N1 SW_TX4_N RX4N TX4N 3-B3,13-D2 E SW_RX6_N C167 0.1U SW_STUB_RX5_P P5 P2 SW_TX5_P E 3-B2,13-C2 RX5P TX5P 3-B3,13-C2 SW_STUB_RX5_N P4 P1 SW_TX5_N RX5N SRIO00-15 TX5N 3-B3,13-C2 SW_RX7_P C171 0.1U SW_STUB_RX6_P T5 T2 SW_TX6_P 3-B2,13-C2 RX6P TX6P 3-B3,13-C2 SW_STUB_RX6_N T4 T1 SW_TX6_N RX6N TX6N 3-B3,13-C2 SW_RX7_N C166 0.1U SW_STUB_RX7_P U5 U2 SW_TX7_P 3-B2,13-C2 RX7P TX7P 3-B3,13-C2 SW_STUB_RX7_N U4 U1 SW_TX7_N RX7N TX7N 3-B3,13-C2 SW_STUB_RX8_P AD13 AG13 SW_TX8_P RX8P TX8P 3-C6,14-B5 SW_RX8_P C151 0.1U SW_STUB_RX8_N AE13 AH13 SW_TX8_N 3-C4,14-B5 RX8N TX8N 3-C6,14-B5 SW_STUB_RX9_P AD14 AG14 SW_TX9_P RX9P TX9P 3-C6,14-C5 SW_RX8_N C150 0.1U SW_STUB_RX9_N AE14 AH14 SW_TX9_N 3-C4,14-B5 RX9N TX9N 3-C6,14-C5 SW_STUB_RX10_P AD16 AG16 SW_TX10_P RX10P TX10P 3-C6,14-C5 SW_RX9_P C149 0.1U SW_STUB_RX10_N AE16 AH16 SW_TX10_N 3-C4,14-C5 RX10N TX10N 3-C6,14-C5 SW_STUB_RX11_P AD17 AG17 SW_TX11_P RX11P TX11P 3-C6,14-C5 SW_RX9_N C148 0.1U SW_STUB_RX11_N AE17 AH17 SW_TX11_N 3-C4,14-C5 RX11N TX11N 3-C6,14-C5 SW_RX10_P C147 0.1U SW_STUB_RX12_P T24 T27 SW_TX12_P 3-C4,14-C5 RX12P TX12P 3-B6,18-E2 SW_STUB_RX12_N T25 T28 SW_TX12_N RX12N TX12N 3-B6,18-E2 SW_RX10_N C146 0.1U SW_STUB_RX13_P R24 R27 SW_TX13_P 3-C4,14-C5 RX13P TX13P 3-B6 SW_STUB_RX13_N R25 R28 SW_TX13_N RX13N TX13N 3-B6 SW_RX11_P C145 0.1U SW_STUB_RX14_P N24 N27 SW_TX14_P 3-C4,14-C5 RX14P TX14P 3-B6,18-C2 SW_STUB_RX14_N N25 N28 SW_TX14_N RX14N TX14N 3-B6,18-C2 SW_RX11_N C144 0.1U SW_STUB_RX15_P M24 M27 SW_TX15_P 3-C4,14-C5 RX15P TX15P 3-B6 SW_STUB_RX15_N M25 M28 SW_TX15_N RX15N 1 OF 7 TX15N 3-B6 80HCPS1848_CEB C159 0.1U D 3-B4,18-E4 SW_RX12_P D C158 0.1U 3-B4,18-E4 SW_RX12_N C157 0.1U 3-B4 SW_RX13_P C156 0.1U 3-B4 SW_RX13_N C155 0.1U 3-B4,18-C4 SW_RX14_P C154 0.1U 3-B4,18-C4 SW_RX14_N C153 0.1U 3-B4 SW_RX15_P C152 0.1U 3-B4 SW_RX15_N L.A. PADS C C J5 J3 SW_RX0_P 4 1 SW_TX0_P SW_RX8_P 4 1 SW_TX8_P 3-F2,12-D2 CEP/RX0 CAP/TX0 3-E5,12-D2 3-E2,14-B5 CEP/RX0 CAP/TX0 3-E5,14-B5 SW_RX0_N 6 3 SW_TX0_N SW_RX8_N 6 3 SW_TX8_N 3-F2,12-D2 CEN/RX0 CAN/TX0 3-E5,12-D2 3-E2,14-B5 CEN/RX0 CAN/TX0 3-E5,14-B5 SW_RX1_P 10 7 SW_TX1_P SW_RX9_P 10 7 SW_TX9_P 3-F2,12-D2 CFP/RX1 CBP/TX1 3-E5,12-C2 3-E2,14-C5 CFP/RX1 CBP/TX1 3-E5,14-C5 SW_RX1_N 12 9 SW_TX1_N SW_RX9_N 12 9 SW_TX9_N 3-F2,12-D2 CFN/RX1 CBN/TX1 3-E5,12-C2 3-D2,14-C5 CFN/RX1 CBN/TX1 3-E5,14-C5 SW_RX2_P 16 13 SW_TX2_P SW_RX10_P 16 13 SW_TX10_P 3-F2,12-C2 CGP/RX2 CCP/TX2 3-E5,12-C2 3-D2,14-C5 CGP/RX2 CCP/TX2 3-E5,14-C5 SW_RX2_N 18 15 SW_TX2_N SW_RX10_N 18 15 SW_TX10_N 3-F2,12-C2 CGN/RX2 CCN/TX2 3-E5,12-C2 3-D2,14-C5 CGN/RX2 CCN/TX2 3-E5,14-C5 SW_RX3_P 22 19 SW_TX3_P SW_RX11_P 22 19 SW_TX11_P 3-F2,12-C2 CHP/RX3 CDP/TX3 3-E5,12-C2 3-D2,14-C5 CHP/RX3 CDP/TX3 3-D5,14-C5 SW_RX3_N 24 21 SW_TX3_N SW_RX11_N 24 21 SW_TX11_N 3-E2,12-C2 CHN/RX3 CDN/TX3 3-E5,12-C2 3-D2,14-C5 CHN/RX3 CDN/TX3 3-D5,14-C5 2 14 2 14 GND1 GND5 GND1 GND5 5 17 5 17 GND2 GND6 GND2 GND6 8 20 8 20 GND3 GND7 GND3 GND7 11 23 11 23 GND4 GND8 GND4 GND8 SRIO_LA_PAD SRIO_LA_PAD B B J2 J4 SW_RX4_P 4 1 SW_TX4_P SW_RX12_P 4 1 SW_TX12_N 3-E2,13-D2 CEP/RX0 CAP/TX0 3-E5,13-D2 3-D2,18-E4 CEP/RX0 CAP/TX0 3-D5,18-E2 SW_RX4_N 6 3 SW_TX4_N SW_RX12_N 6 3 SW_TX12_P 3-E2,13-D2 CEN/RX0 CAN/TX0 3-E5,13-D2 3-D2,18-E4 CEN/RX0 CAN/TX0 3-D5,18-E2 SW_RX5_P 10 7 SW_TX5_P SW_RX13_P 10 7 SW_TX13_N 3-E2,13-D2 CFP/RX1 CBP/TX1 3-E5,13-C2 3-D2 CFP/RX1 CBP/TX1 3-D5 SW_RX5_N 12 9 SW_TX5_N SW_RX13_N 12 9 SW_TX13_P 3-E2,13-D2 CFN/RX1 CBN/TX1 3-E5,13-C2 3-D2 CFN/RX1 CBN/TX1 3-D5 SW_RX6_P 16 13 SW_TX6_P SW_RX14_P 16 13 SW_TX14_N 3-E2,13-C2 CGP/RX2 CCP/TX2 3-E5,13-C2 3-D2,18-C4 CGP/RX2 CCP/TX2 3-D5,18-C2 SW_RX6_N 18 15 SW_TX6_N SW_RX14_N 18 15 SW_TX14_P 3-E2,13-C2 CGN/RX2 CCN/TX2 3-E5,13-C2 3-D2,18-C4 CGN/RX2 CCN/TX2 3-D5,18-C2 SW_RX7_P 22 19 SW_TX7_P SW_RX15_P 22 19 SW_TX15_N 3-E2,13-C2 CHP/RX3 CDP/TX3 3-E5,13-C2 3-D2 CHP/RX3 CDP/TX3 3-D5 SW_RX7_N 24 21 SW_TX7_N SW_RX15_N 24 21 SW_TX15_P 3-E2,13-C2 CHN/RX3 CDN/TX3 3-E5,13-C2 3-C2 CHN/RX3 CDN/TX3 3-D5 2 14 2 14 GND1 GND5 GND1 GND5 5 17 5 17 GND2 GND6 GND2 GND6 8 20 8 20 GND3 GND7 GND3 GND7 11 23 11 23 GND4 GND8 GND4 GND8 SRIO_LA_PAD SRIO_LA_PAD TITLE : 80HCPS1848 LANES 0-15 A A SIZE DRAWING NUMBER : Version: DESIGNER : C LAST MODIFIED DATE : SHEET 3 OF 25 7-22-2010_16:46 1 2 3 4 5 6 7 1 2 3 4 5 6 7 80HCPS1848 Lanes 16-31 F F C223 0.1U 4-C2,17-E1 SW_RX16_P C222 0.1U 4-C2,17-E1 SW_RX16_N C225 0.1U 4-C2,17-D1 SW_RX17_P C226 0.1U 4-C2,17-D1 SW_RX17_N C227 0.1U 4-C2,17-D1 SW_RX18_P C221 0.1U 4-C2,17-C1 SW_RX18_N C228 0.1U 4-C2,17-C1 SW_RX19_P C220 0.1U 4-C2,17-C1 SW_RX19_N U11 SW_STUB_RX16_P G5 G2 SW_TX16_P RX16P TX16P 4-C3,17-E3 SW_RX20_P C219 0.1U SW_STUB_RX16_N G4 G1 SW_TX16_N 4-B2,14-D2 RX16N TX16N 4-C3,17-E3 SW_STUB_RX17_P H5 H2 SW_TX17_P RX17P TX17P 4-C3,17-D3 SW_RX20_N C218 0.1U SW_STUB_RX17_N H4 H1 SW_TX17_N 4-B2,14-D2 RX17N TX17N 4-C3,17-D3 SW_STUB_RX18_P K5 K2 SW_TX18_P RX18P TX18P 4-C3,17-D3 SW_RX21_P C217 0.1U SW_STUB_RX18_N K4 K1 SW_TX18_N 4-B2,14-D2 RX18N TX18N 4-C3,17-C3 SW_STUB_RX19_P L5 L2 SW_TX19_P RX19P TX19P 4-C3,17-C3 SW_RX21_N C216 0.1U SW_STUB_RX19_N L4 L1 SW_TX19_N 4-B2,14-D2 RX19N TX19N 4-C3,17-C3 SW_RX22_P C199 0.1U SW_STUB_RX20_P AD7 AG7 SW_TX20_P 4-B2,14-C2 RX20P TX20P 4-B3,14-D2 SW_STUB_RX20_N AE7 AH7 SW_TX20_N RX20N TX20N 4-B3,14-D2 E SW_RX22_N C198 0.1U SW_STUB_RX21_P AD8 AG8 SW_TX21_P E 4-B2,14-C2 RX21P TX21P 4-B3,14-C2 SW_STUB_RX21_N AE8 AH8 SW_TX21_N RX21N TX21N 4-B3,14-C2 SW_RX23_P C200 0.1U SW_STUB_RX22_P AD10 AG10 SW_TX22_P 4-B2,14-C2 RX22P TX22P 4-B3,14-C2 SW_STUB_RX22_N AE10 AH10 SW_TX22_N RX22N TX22N 4-B3,14-C2 SW_RX23_N C229 0.1U SW_STUB_RX23_P AD11 AG11 SW_TX23_P 4-B2,14-C2 RX23P TX23P 4-B3,14-C2 SW_STUB_RX23_N AE11 AH11 SW_TX23_N RX23N SRIO16-31 TX23N 4-B3,14-C2 SW_STUB_RX24_P AB24 AB27 SW_TX24_P RX24P TX24P 4-C6,19-E2 SW_RX24_P C215 0.1U SW_STUB_RX24_N AB25 AB28 SW_TX24_N 4-C4,19-E4 RX24N TX24N 4-C6,19-E2 SW_STUB_RX25_P AA24 AA27 SW_TX25_P RX25P TX25P 4-C6,19-E2 SW_RX24_N C214 0.1U SW_STUB_RX25_N AA25 AA28 SW_TX25_N 4-C4,19-E4 RX25N TX25N 4-C6,19-E2 SW_STUB_RX26_P W24 W27 SW_TX26_P RX26P TX26P 4-C6,19-E2 SW_RX25_P C213 0.1U SW_STUB_RX26_N W25 W28 SW_TX26_N 4-C4,19-E4 RX26N TX26N 4-C6,19-E2 SW_STUB_RX27_P V24 V27 SW_TX27_P RX27P TX27P 4-C6,19-D2 SW_RX25_N C212 0.1U SW_STUB_RX27_N V25 V28 SW_TX27_N 4-C4,19-E4 RX27N TX27N 4-C6,19-D2 SW_RX26_P C211 0.1U SW_STUB_RX28_P E22 B22 SW_TX28_P 4-C4,19-E4 RX28P TX28P 4-B6,20-D2 SW_STUB_RX28_N D22 A22 SW_TX28_N RX28N TX28N 4-B6,20-D2 SW_RX26_N C210 0.1U SW_STUB_RX29_P E21 B21 SW_TX29_P 4-C4,19-E4 RX29P TX29P 4-B6,20-D2 SW_STUB_RX29_N D21 A21 SW_TX29_N RX29N TX29N 4-B6,20-D2 SW_RX27_P C209 0.1U SW_STUB_RX30_P E19 B19 SW_TX30_P 4-C4,19-D4 RX30P TX30P 4-B6,20-D2 SW_STUB_RX30_N D19 A19 SW_TX30_N RX30N TX30N 4-B6,20-D2 SW_RX27_N C208 0.1U SW_STUB_RX31_P E18 B18 SW_TX31_P 4-C4,19-D4 RX31P TX31P 4-B6,20-E2 SW_STUB_RX31_N D18 A18 SW_TX31_N RX31N 2 OF 7 TX31N 4-B6,20-E2 80HCPS1848_CEB C207 0.1U D 4-B4,20-E2 SW_RX28_P D C206 0.1U 4-B4,20-E2 SW_RX28_N C205 0.1U 4-B4,20-E2 SW_RX29_P C204 0.1U 4-B4,20-E2 SW_RX29_N C203 0.1U 4-B4,20-E2 SW_RX30_P C202 0.1U 4-B4,20-E2 SW_RX30_N C201 0.1U 4-B4,20-E2 SW_RX31_P C224 0.1U 4-B4,20-E2 SW_RX31_N L.A.
Load more

Recommended publications
  • Module (Daughter Bd) 02-Nov-2015
    8 7 6 5 4 3 2 1 THIS DRAWING IS THE PROPERTY OF ANALOG DEVICES INC. IT IS JUMPER TABLE REVISIONS NOT TO BE REPRODUCED OR COPIED, IN WHOLE OR IN PART, OR REV DESCRIPTION DATE APPROVED USED IN FURNISHING INFORMATION TO OTHERS, OR FOR ANY OTHER JP# ON OFF A ORIGINATION NHR-039086 JUN-2014 R.GETZ PURPOSE DETRIMENTAL TO THE INTERESTS OF ANALOG DEVICES. THE EQUIPMENT SHOWN HEREON MAY BE PROTECTED BY PATENTS 1 OWNED OR CONTROLLED BY ANALOG DEVICES. 2 3 RELAY CONTROL CHART D 4 D CONTROL CODE DEVICE FUNCTION CONNECTOR 5 * SEE ASSEMBLY INSTRUCTIONS C C B B 02-NOV-2015 MODULE (DAUGHTER BD) TEMPLATE ENGINEER DATE ANALOG - HARDWARE SERVICES SCHEMATIC DEV CES - HARDWARE SYSTEMS HW TYPE : MODULE - Product(s): Zynq / AD9361 TEST ENGINEER <PRODUCT_1> - A COMPONENT ENGINEER PACKAGE : PinCount-lead N/A Package-family A - : Pitch-pitch StyleVendor Style TEST PROCESS <User Define> - HARDWARE RELEASE <User Define> - <User Define> DESIGNER MASTER PROJECT TEMPLATE TESTER TEMPLATE DRAWING NO. REV. S.LEE/ TBD no_template PTD ENGINEER UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES 02_038702 C <PTD_ENGINEER> DECIMALS FRACTIONS ANGLES P.O SPEC. BK/BD SPEC. SOCKET OEM OEM PART# HANDLER CHECKER SIZE SCALE CODE ID NO. X.XX +-0.010 +-1/32 +-2 - X.XXX +-0.005 DD 1:1 CodeID SHEET 1 OF 10 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 REVISIONS REV DESCRIPTION DATE APPROVED PHY1_1V8 3.3V E16 PHY1_VDD_3V3 PS_MIO17_501_ETH0_TX_D0 PS_MIO26_501_ETH0_RX_D3 PHY1_AVDD_1V8_OUT PS_MIO18_501_ETH0_TX_D1 PS_MIO25_501_ETH0_RX_D2 1 2 PHY1_AVDD_1V8 E13 L0805 1 2 PS_MIO19_501_ETH0_TX_D2
    [Show full text]
  • Biological Properties and Genetic Characterization of Novel Low
    microorganisms Communication Biological Properties and Genetic Characterization of Novel Low Pathogenic H7N3 Avian Influenza Viruses Isolated from Mallard Ducks in the Caspian Region, Dagestan, Russia Marina Gulyaeva 1,2,* , Maria Alessandra De Marco 3, Ganna Kovalenko 4, Eric Bortz 4 , Tatiana Murashkina 1, Kseniya Yurchenko 1 , Marzia Facchini 5, Mauro Delogu 6, Ivan Sobolev 1, Alimurad Gadzhiev 7, Kirill Sharshov 1 and Alexander Shestopalov 1 1 Federal State Budget Scientific Institution, Federal Research Center of Fundamental and Translational Medicine, 630117 Novosibirsk, Russia; [email protected] (T.M.); [email protected] (K.Y.); [email protected] (I.S.); [email protected] (K.S.); [email protected] (A.S.) 2 Department of Natural Science, Novosibirsk State University, 630090 Novosibirsk, Russia 3 ISPRA Institute for Environmental Protection and Research, 40064 Ozzano dell’Emilia (BO), Italy; [email protected] 4 Department of Biological Sciences, University of Alaska, Anchorage, AK 99508, USA; [email protected] (G.K.); [email protected] (E.B.) 5 Department of Infectious Diseases, Istituto Superiore di Sanità, 00161 Rome, Italy; [email protected] 6 Department of Veterinary Medical Sciences, University of Bologna, 40064 Ozzano dell’Emilia (BO), Italy; Citation: Gulyaeva, M.; De Marco, [email protected] M.A.; Kovalenko, G.; Bortz, E.; 7 Department of Ecology and Sustainable Development, Dagestan State University, 367000 Dagestan, Russia; Murashkina, T.; Yurchenko, K.; [email protected] Facchini, M.; Delogu, M.; Sobolev, I.; * Correspondence: [email protected]; Tel.: +7-(952)-913-65-13 Gadzhiev, A.; et al. Biological Properties and Genetic Abstract: Avian influenza viruses (AIVs) are maintained in wild bird reservoirs, particularly in Characterization of Novel Low mallard ducks and other waterfowl.
    [Show full text]
  • Notebook Computer M350C/M360C Service Manual Preface
    Preface Notebook Computer M350C/M360C Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica- tion, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 July 2003 Preface Trademarks Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and./or registered trademarks of their respective companies. II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the M350C/ M360C series notebook PC.
    [Show full text]
  • Etruscan Glossarya.Pdf
    A B CD 1 2 Note: This glossary supplements Table 1. Copyright © 1981-2017 Mel Copeland. All rights reserved. 3 4.27.17 - Items in red are changes; often updated For those using the PDF version of this file, see the latest changes Etruscan_GlossaryA.xls at Etruscan Phrases 4 "X" locators designate Anatolian (Phrygian) texts 5 Updated to reconcile declension patterns 6 http://www.maravot.com/Etruscan_Phrases_a.html 7 Contact: [email protected] 8 9 English Etruscan Location 10 to, in (L. a) A TC120,TC127, Au95, Au102, AG-2, Z92, AN12, AN100, 11 to, in (L. a) A (continued) N21, N206, N371,Q701, Q717, R381, R499, N722, N731, MS23 12 to, in (L. a) A (continued) Q376, Q388, R542, R584, AH-9, AC-3, TC211, K159, PJ-1, J5-6, J40-10, PV-7, PW-12 13 and, and also, and indeed (L. ac, atque) AC Z58, Z432, Z1183, Au-1, TC46, TC90, Au95, K149, L50, J41-2 14 and, and also, and indeed (L. ac, atque) AK Z489, Z508, Z1139, XQ-1 15 call, to (L. accio-aire) ACA Z572, TC46 16 it/he will move, set in motion (L. ago-agere, Ind. I Fut. 3rd Pers. Single aget) ACE J40-8 17 call, to (L. accio-aire) ACeR M71 18 prophesy, to wish (L. auguro-are) ACERN (they prophesy) DL-2 (This mirror depicts reading from a liver) 19 level, make equal, compare (L. acquo-are) ACES N462 20 Achaia? (L. Achaia or Achaia-ae, Achaia or in Gen. Greece) ACHIE (AKIE) CP35 21 Agememnon ACHMEMNVN DM-6, CG-3 22 Achilles – see CG-1 ACHLE (AKLE) (See ACHVLE) MM-5, CG-1, DP-1, LM-4? CCG-3 23 Achilles – see CG-1 ACHL or ACHLA (ACH LA) CH-2 24 Achule, god in company of Thetis on a mirror, probably Achilles ACHVLE (AKVLE) (See ACHLE) CQ-2 25 Achloser, name of Briseis, concubine of Achilles? ACHLVSR ( ACHLPIMSR?, ACHVPIMSR?) CQ3 26 call, to (L.
    [Show full text]
  • LCD Panel Open
    Preface Notebook Computer M550G/M540G Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica- tion, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 August 2005 Preface Trademarks Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and./or registered trademarks of their respective companies. II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the M550G/ M540G series notebook PC.
    [Show full text]
  • CD-RW Drive - TEAC (M375C)
    Preface Notebook Computer M375C/M385C Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice. Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication. This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publica- tion, except for copies kept by the user for backup purposes. Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer. Version 1.0 July 2003 Preface Trademarks Intel® and Pentium® are registered trademarks of Intel Corporation. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks and./or registered trademarks of their respective companies. II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to look up basic information for servicing and/or upgrading components of the M375C/ M385C series notebook PC.
    [Show full text]
  • ACEA Regulatory Guide 2021
    AUTOMOTIVE REGULATORY GUIDE 2021 It is with great pleasure that I present you ACEA’s Regulatory Guide, a unique publication that provides a comprehensive overview of the national and international regulations governing the automotive industry. This first edition covers the regulatory frameworks of the European Union (EU), United Nations Economic Commission for Europe (UNECE), Gulf Cooperation Council (GCC) and the Association of Southeast Asian Nations (ASEAN), as well as countries such as Brazil, China, India, Israel, Japan and South Korea. Looking at the many regulations that define how motor vehicles should be built and approved, I cannot stress enough the importance of a harmonised regulatory framework that allows for innovation and investment across our industry. Indeed, the European automotive industry is one of the most heavily regulated sectors in Europe with more than 100 EU Regulations and 80 Directives covering the sector’s activities. That is why ACEA has long been advocating the need for smarter, rather than simply more, legislation. To give you an example, with over 50 different safety regulations in the EU, 77 at UNECE level and 40 for the seven Gulf countries, the harmonisation of procedures and standards is much needed to further advance the global objective of reducing road fatalities to zero in the future. And the same applies to addressing the climate change challenge of course; increased global harmonisation will allow us to get to carbon-neutral mobility faster and more efficiently. With the support of national and international regulators, the automotive industry is fully committed to facing the challenges of today for a better tomorrow.
    [Show full text]
  • MACHXO3L DSI Breakout Board Schematics
    5 4 3 2 1 XO3L Breakout Board Revision B May, 2014 D D LEDS(1-4) RGB LED PMOD I/Os BANK 1 Header I/Os FPGA SMA INPUT I/Os LCMXO3L-6900C-6BG256C C U7 C BANK 2 & 3 BANK 0 & 5 SMA OUTPUT Header BANK 4 SPI I/Os FLASH Optional I2C PMOD Configuration USB to JTAG USB CONNECTOR USB to I2C Optional JTAG Configuration B B FPGA I/Os I/Os LCMXO3L-2100E-6UWG49CTR U9 MIPI_INPUT MIPI_OUTPUT A A Lattice Semiconductor Applications Email: [email protected] Title Block Diagram Size Project Schematic Rev B C MachXO3L DSI Breakout Board Board Rev B Date: May, 2014 Sheet of 71 5 4 3 2 1 5 4 3 2 1 D D 3.3V FB4 3.3V Optional JTAG VCCIO Header when C5 C6 C7 C8 C9 FB_60ohm 1 C1 C2 VCCIO is 2.5V R211 R212 R213 PART_NUMBER = HI0603P600R-10 VCCIO 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 3.3V Manufacturer = Laird-signal 4.7uF 0.1uF 4.7K 4.7K 4.7K 2 J1 FB5 1 1 2 2 FTDI_TDO [Pg7] 3 FTDI_TDI [Pg5] 3 4 FB_60ohm 1 C3 C4 4 5 PART_NUMBER = HI0603P600R-10 5 6 FTDI_TMS [Pg5,7] Manufacturer = Laird-signal 4.7uF 0.1uF 6 7 2 7 8 FTDI_TCK [Pg5,7] 3.3V 8 header_1x8 DNI R220 1K TP6 3.3V U1 FT2232HL 4 9 12 37 64 20 31 42 56 VPLL VPHY VCCIO VCCIO VCCIO VCCIO VCORE VCORE VCORE 16 0 R5 50 ADBUS0 17 0 R6 VREGIN ADBUS1 18 0 R7 C 49 ADBUS2 19 0 R8 C VREGOUT ADBUS3 21 ADBUS4 22 ADBUS5 DM[Pg3] 7 23 8 DM ADBUS6 24 DP[Pg3] DP ADBUS7 C10 C11 26 VCCIO R218 1K 14 ACBUS0 27 10uF 0.1uF RESET# ACBUS1 28 3.3V ACBUS2 29 R221 12K 6 ACBUS3 30 3.3V REF ACBUS4 32 R216 R217 ACBUS5 33 R16 R17 R18 ACBUS6 34 1K 1K 10K 10K 10K 63 ACBUS7 62 EECS 38 0 R203 DNL SCL_2 [Pg7] U2 61 EECLK BDBUS0 39 0 R204 DNL SDA_2
    [Show full text]
  • Structural and Functional Characterization of Neuraminidase
    Structural and functional characterization of SEE COMMENTARY neuraminidase-like molecule N10 derived from bat influenza A virus Qing Lia,b,1, Xiaoman Sunb,c,1, Zhixin Lib,c,1, Yue Liub, Christopher J. Vavrickab, Jianxun Qib, and George F. Gaoa,b,c,d,2 aSchool of Life Sciences, University of Science and Technology of China, Hefei 230027, China; bCAS Key Laboratory of Pathogenic Microbiology and Immunology, Institute of Microbiology, Chinese Academy of Sciences, Beijing 100101, China; cUniversity of Chinese Academy of Sciences, Beijing 100049, China; and dResearch Network of Immunity and Health, Beijing Institutes of Life Science, Chinese Academy of Sciences, Beijing 100101, China Edited by Peter Palese, Mount Sinai School of Medicine, New York, NY, and approved August 30, 2012 (received for review July 2, 2012) The recent discovery of the unique genome of influenza virus protein that is significantly divergent from other influenza NAs (7), H17N10 in bats raises considerable doubt about the origin and and thus whether N10 has special structural and/or functional evolution of influenza A viruses. It also identifies a neuraminidase features remains unknown. (NA)-like protein, N10, that is highly divergent from the nine other Here we report the crystal structure of the bat-derived influenza well-established serotypes of influenza A NA (N1–N9). The structural virus N10. Our findings demonstrate that N10 has a canonical elucidation and functional characterization of influenza NAs have sialidase fold but lacks sialidase activity. The dramatic changes in illustrated the complexity of NA structures, thus raising a key ques- the conserved active site residues relative to canonical influenza tion as to whether N10 has a special structure and function.
    [Show full text]
  • AC701 Evaluation Board for the Artix-7 FPGA User Guide (UG952)
    AC701 Evaluation Board for the Artix-7 FPGA User Guide UG952 (v1.4) August 6, 2019 DISCLAIMER The information disclosed to you hereunder (the “Materials”) is provided solely for the selection and use of Xilinx products. To the maximum extent permitted by applicable law: (1) Materials are made available "AS IS" and with all faults, Xilinx hereby DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and (2) Xilinx shall not be liable (whether in contract or tort, including negligence, or under any other theory of liability) for any loss or damage of any kind or nature related to, arising under, or in connection with, the Materials (including your use of the Materials), including for any direct, indirect, special, incidental, or consequential loss or damage (including loss of data, profits, goodwill, or any type of loss or damage suffered as a result of any action brought by a third party) even if such damage or loss was reasonably foreseeable or Xilinx had been advised of the possibility of the same. Xilinx assumes no obligation to correct any errors contained in the Materials or to notify you of updates to the Materials or to product specifications. You may not reproduce, modify, distribute, or publicly display the Materials without prior written consent. Certain products are subject to the terms and conditions of Xilinx’s limited warranty, please refer to Xilinx’s Terms of Sale which can be viewed at https://www.xilinx.com/legal.htm#tos; IP cores may be subject to warranty and support terms contained in a license issued to you by Xilinx.
    [Show full text]
  • B D Dragonboard 820C
    8 7 6 5 4 3 2 1 COPYRIGHT (C) 2017-2018 QUALCOMM TECHNOLOGIES, INC. ALL RIGHTS RESERVED. ACCESS AND RGHTS TO USE IS SUBJECT TO THE ATTACHED EXHIBIT1. D D C C DragonBoard 820c B B CONTRACT NO. DRAWN BY DATE ENGINEER TITLE PROJECT ENGINEER QUALITY ASSURANCE DragonBoard 820c A A CONFIGURATION SIZE DRAWING NO REV DESIGN ACTIVITY APPROVAL D LM25-P2751-1 B SCALE RELEASE DATE DESIGN APPROVAL NONE SHEET 1 OF 44 TITLE 8 7 6 5 4 3 2 1 VERSION EDITED BY LAST EDIT DATE 19/12/2017:11:39 8 7 6 5 4 3 2 1 COPYRIGHT (C) 2017-2018 QUALCOMM TECHNOLOGIES, INC. ALL RIGHTS REVISIONS RESERVED. ACCESS AND RGHTS TO USE IS SUBJECT TO THE ATTACHED EXHIBIT1. LTR DESCRIPTION DATE APPROVED SHEET BLOCK SCHEMATIC SHEET BLOCK SCHEMATIC SHEET BLOCK SCHEMATIC SHEET BLOCK SCHEMATIC D 1 \ TITLE D 2 \ TABLE_OF_CONTENTS 3 \ APQ8096 CONTROL MEMORY IO 4 \ APQ8096 - MIPI DSI/CSI/HDMI 5 \ APQ8096 - RF 6 \ APQ8096 - GPIO [0-73]/I2C PULL 7 \ APQ8096 - GPIO [74-145] 8 \ I2C PULL-UP RESISTORS 9 \ APQ8096 - PWR1 10 \ APQ8096 - PWR2 11 \ APQ8096 - PWR3 12 \ APQ8096 - PWR4 13 \ APQ8096 - GND 14 \ POWER - BUCK VPH PWR 15 \ POWER - BUCKS 5V AND 3P3V 16 \ POWER - REG 1P5V AND S4A BHEL 17 \ PMI8996 - CHARGE 18 \ PMI8996 - CONTROL 19 \ PMI8996 - REG/WLED 20 \ PMI8996 - GND 21 \ PM8996 - CONTROL/CLOCK 22 \ PM8996 - LDO C 23 \ PM8996 - VSMPS S1A-S6A/GPIO C 24 \ PM8996 - VSMPS S7A-S12A 25 \ MEMORY - POP LPDDR4 26 \ MEMORY - USD CONNECTOR 27 \ MEMORY - UFS 28 \ DISPLAY - HDMI 29 \ USB - USB 3 HUB 30 \ USB - SWITCH/DEVICE CONNECTOR 31 \ USB - HOSTS CONNECTORS 32 \ GBE ETHERNET - AR8151 33 \ MINI PCIE CONNECTOR 34 \ SENSORS 35 \ AUDIO ANALOG TASHA 36 \ AUDIO DIGITAL TASHA 37 \ AUDIO CONNECTORS 38 \ QCA6174 - WIFI-BT M2 MODULE 39 \ WGR7640 40 \ HS/LS EXPANSION CONNECTORS 41 \ SWITCHES/LEDS 42 \ JTAG/BOOT CONFIG 43 \ CAMERA CONNECTOR B B A A TITLE DragonBoard 820c SIZE DRAWING NO REV D LM25-P2751-1 B TABLE_OF_CONTENTS SCALE NONE SHEET 2 OF 44 8 7 6 5 4 3 2 1 VERSION EDITED BY LAST EDIT DATE 19/12/2017:11:39 8 7 6 5 4 3 2 1 COPYRIGHT (C) 2017-2018 QUALCOMM TECHNOLOGIES, INC.
    [Show full text]
  • Maintenance and Rehabilitation Needs Report of 2018 - 2019 for RHD Paved Roads
    GOVERNMENT OF THE PEOPLE’S REPUBLIC OF BANGLADESH ROADS AND HIGHWAYS DEPARTMENT ROAD TRANSPORT AND HIGHWAYS DIVISION MINISTRY OF ROAD TRANSPORT AND BRIDGES Maintenance and Rehabilitation Needs Report of 2018 - 2019 for RHD Paved Roads HDM Circle May 2018 PREFACE This is the 2018-19 edition of Maintenance and Rehabilitation Needs Report prepared from the output of HDM-4 Analysis. The RMMS database and the HDM-4 model have been utilized to derive yearly maintenance demand for RHD. During 2016-17 HDM Circle conducted comprehensive survey which included Pavement Inventory in two National Corridor Road N1 and N3 and Road Condition Assessment in all RHD Road Network. Traffic Survey was carried out at around 1300 stations. The RMMS Database was updated accordingly and was used as an input for this year’s HDM Analysis. By the HDM Analysis, the time and location of maintenance requirement for the RHD Road network has been identified and prioritized in accordance with NPV/Cost ratio. Socio-economic and political factors, not considered in this analysis, are extremely important in prioritizing maintenance treatments. It is expected that this approach will be adopted in future years. The list of on-going projects has been prepared after collecting those from Division and Project Offices of the foreign aided projects. Projects, which are in progress and not completed before the start of Roughness Survey have been kept out of the HDM analysis to avoid duplication in the maintenance program and to find out actual immediate demands. However, few segments already completed or ongoing may appear in the HDM output because those were not reported by the field offices before the HDM run and hence were not excluded.
    [Show full text]