ISCA-102-L/R for Commercial Applications

ES-WD-ISCA-102-L/R For Commercial Applications

Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor –––––––––––––––––––––––––––––––––––––––––––––

Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––

Engineer –––––––––––––––––––––––––––––––––––––––––––––– Contractor's P.O. No. –––––––––––––––––––––––––––––––––––

Approval –––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––

Tag ––––––––––––––––––––––––––––––––––––––––––––––––––

13"(330)13"(330) ISCA-102-L/R 2 3/4"(70) 1010 1/4"(260)1/4"(260) 66 5/8"(168)5/8"(168) Industry Standard Single Horizontal 5 1/2"(140)1/2"(140) 5 1/2"(140) 1000 lb. Closet Carrier 11 1/2"(38) 1/2"(38) Specification 22 3/16"(56)3/16"(56) Watts ISCA-102-L/R Industry Standard single horizontal adjust- 4"(102) 3"(76) Pipe SizeSize able water closet carrier with epoxy coated cast iron fitting, 3"(76) 4"(102) no hub waste and 2"(51) no hub vent connections, epoxy 2"(51)2"(51) VentVent 5 3/8"(137)

coated ductile iron patented compression seal faceplate assem- 5 3/8"(137) 9 27/32"(250) 9 27/32"(250) (108) (108) 4 1/4" 17"(432) Min. 4 1/4"

bly, and epoxy coated ductile iron foot supports with incremental 17"(432) Min. 14 3/16"(361) height markings. Adjustable to standard and wheelchair height, 9"(229) 14 3/16"(361) ductile iron rear anchor support, adjustable ABS nipple with inte- gral test cap and neoprene bowl gasket, stainless steel support (111) (111) 4 11/32" rods and hardware, and chrome plated cap nuts. Carrier complies 4 11/32" with requirements of ASME A112.6.1M up to a 1000 lb. (454 kg) 11 9/32"(32) 9/32"(32) static load. 5/16"(8)

Options (Select One or More) Suffix Description 15"(381) -3 3" No Hub Fitting 9"(229)9"(229) -36 36" Long Barrel Fitting -CI Cast Iron Nipple -HS Hub & Spigot Connections -M11 Tiling Frame 11 3/4"(44) -M20 Flush Valve Support 0"0" Min.Min. 7 1/2"(191) 7 1/2"(191) 4"(102)4"(102) Max. 55 3/8"3/8 Please refer to watts.com for BAA (137) information on specific models.

17 3/4"(451) 44 1/2" 1/2" 5" 17 3/4"(451) 5" 5 1/2" (114)(114) (127)(127) 5 1/2" 6"6" NOTICE (140)(140)(152)(152) All foot supports must be securely anchored to concrete floor 4 7/8"(124) Min. 9 1/2"(241) Max. 4 7/8"(124) Min. with min. 1/2"(13) anchors with pull-out force of 500 lbs. (227 9 1/2"(241) Max. kg.) Rear anchor support must be securely anchored with min. 1/2"(13) anchors with pull-out force of 1000 lbs. (454 kg). Dual slotted carrier feet require one 1/2"(13) anchor bolt per foot. NOTICE The information contained herein is not intended to replace the full product installation and safety information available or the experience of a trained product installer. You are required to thoroughly read all installation instructions and product safety information before beginning the installation of this product.

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.