Rubber Division, ACS members are welcome to attend all open committee meetings. Schedule of Events *Closed meeting Date Time Event Facility Room Floor
Monday 8:00 a.m. - 9:00 a.m. Steering Committee Breakfast* Renaissance Hotel Commerce Street Grille Lobby Level 10.13.2014 8:00 a.m. - 5:00 p.m. Registration Convention Center Lobby Lobby Level 8:30 a.m. - 4:30 p.m. Course: Introduction to Rubber Technology for Non-Technologists Renaissance Hotel Belmont One Level Three 9:00 a.m. - 12:00 p.m. Steering Committee Meeting* Renaissance Hotel Jazz Level Four 9:00 a.m. - 4:00 p.m. Course: Internal Mixers and Mixing Parameters Renaissance Hotel Belmont Two Level Three 12:30 p.m. - 2:00 p.m. Membership Committee Meeting Renaissance Hotel Rock & Roll Level Four 1:00 p.m. - 2:00 p.m. Student Affairs Committee Meeting Renaissance Hotel Jazz Level Four 1:00 p.m. - 3:00 p.m. Executive Committee/Rubber Group Chairs
Schedule of Events Training Session Renaissance Hotel Ryman Level Three 2:00 p.m. - 3:00 p.m. Membership Joint Committee Caucus (EEMM) Convention Center 103 Level One 2:00 p.m. - 5:00 p.m. Program Planning Committee Meeting Renaissance Hotel Rock & Roll Level Four 3:00 p.m. - 5:00 p.m. Education & Publications Committee Meeting Renaissance Hotel Jazz Level Four 3:30 p.m. - 4:30 p.m. Area Directors Meeting* Renaissance Hotel Ryman Level Three 4:00 p.m. - 5:00 p.m. History Committee Meeting Renaissance Hotel Country Level Four 4:00 p.m. - 5:30 p.m. Strategic Planning Working Group Meeting* Convention Center 103 Level One 5:00 p.m. - 6:00 p.m. Best Paper Committee Meeting Renaissance Hotel Country Level Four
Tuesday 7:30 a.m. - 5:00 p.m. Registration Convention Center Lobby Lobby Level 10.14.2014 8:00 a.m. - 11:00 a.m. Course: Colorants for Use in Rubber Renaissance Hotel Belmont Two Level Three 8:30 a.m. - 4:30 p.m. Course: Rubber as an Engineering Material Renaissance Hotel Belmont One Level Three 8:30 a.m. - 5:15 p.m. Technical Sessions Convention Center 204, 205 & 206 Level Two 9:00 a.m. - 11:00 a.m. Southern Rubber Group Meeting Convention Center 102 Level One 10:00 a.m. - 10:15 a.m. International Rubber Expo Opening Ceremony & Ribbon Cutting Convention Center Entrance of Exhibit Hall Level One 10:15 a.m. - 5:00 p.m. International Rubber Expo Convention Center Expo Floor Level One 11:00 a.m. - 12:00 p.m. Keynote Address: Gary A. Garfield, Bridgestone Americas, Inc. Convention Center Grand Ballroom Lobby Level 1:00 p.m. - 2:00 p.m. Service Awards Committee Meeting Convention Center 102 Level One 1:00 p.m. - 3:00 p.m. Exhibits & Meeting Sites Committee Meeting Convention Center 103 Level One 1:00 p.m. - 5:00 p.m. Course: Introduction to Performance Minerals and Mineral Fillers in Rubber Compounding Renaissance Hotel Belmont Two Level Three 3:00 p.m. - 4:00 p.m. Marketing Committee Meeting Convention Center 102 Level One 5:15 p.m. - 6:45 p.m. Welcome Reception - Open To All Attendees Convention Center Grand Ballroom Lobby Level
Wednesday 6:30 a.m. Check-in 5K Walk/Run - Sponsored by: H.M. Royal Renaissance Hotel Lobby Lobby Level 10.15.2014 7:30 a.m. - 10:30 a.m. Advisory Committee on Testing Procedures Meeting Convention Center 105 Level One 7:30 a.m. - 5:00 p.m. Registration Convention Center Lobby Lobby Level 8:00 a.m. - 5:00 p.m. Technical Sessions Convention Center 204, 205 & 206 Level Two 8:00 a.m. - 5:00 p.m. 11th Annual Student Colloquium Convention Center 204 Level Two 8:30 a.m. - 3:30 p.m. Course: Cure Chemistry for Rubber Renaissance Hotel Belmont Two Level Three 10:00 a.m. - 11:00 a.m. Subdivision Advisory Committee Meeting Convention Center 107 Level One 10:00 a.m. - 11:00 a.m. Finance & Budget Committee Meeting* Convention Center 102 Level One 10:00 a.m. - 5:00 p.m. 11th Annual Student Poster Session Convention Center Expo Floor Level One 10:00 a.m. - 5:00 p.m. International Rubber Expo Convention Center Expo Floor Level One 11:30 a.m. - 1:00 p.m. 25-Year Club Reception & Luncheon Renaissance Hotel Music City Ballroom Level Two 1:00 p.m. - 3:00 p.m. S&T Awards Committee Meeting* Convention Center 105 Level One 3:00 p.m. - 4:00 p.m. Partnership Development Committee Meeting Convention Center 107 Level One 3:00 p.m. - 4:30 p.m. Area Directors Caucus* Convention Center 103 Level One
Thursday 7:30 a.m. - 3:00 p.m. Registration Convention Center Lobby Lobby Level 10.16.2014 8:00 a.m. - 9:00 a.m. Steering Committee Meeting* Convention Center 107 Level One 8:00 a.m. - 4:15 p.m. Technical Sessions Convention Center 204, 205 & 206 Level Two 9:00 a.m. - 10:30 a.m. Executive Committee Meeting Convention Center 108 Level One 10:00 a.m. - 2:00 p.m. International Rubber Expo Convention Center Expo Floor Level One 10:00 a.m. - 2:00 p.m. Career Fair Convention Center Grand Ballroom Lobby Level 11:00 a.m. - 12:00 p.m. Business & Awards Meeting Convention Center Theater Expo Floor
2 INTERNATIONAL ELASTOMER CONFERENCE
48 186th Technical Meeting INTERNATIONAL ELASTOMER CONFERENCE 32 Co-Chairs: Fillers -C Session A-Room206 30 29 28 27 26 25 Co-Chairs: Mechanics andModelingofRubber Session C-Room204 22 31 24 Wednesday Morning
October 15
4:15 p.m. 3:45 p.m. 3:00 p.m. 2:30 p.m. 2:00 p.m. 1:30 p.m. 2:30 p.m. 9:00 a.m. 8:30 a.m. 4:45 p.m. 3:30 p.m. Peter Mott;AnoopG.Varghese Timothy A.Okel;WesleyWampler
Prediction ofMechanicalProperty An Amplitude,TemperatureandPrestrain Stress SofteningofFilledRubbersandIts Rubber CharacterizationforTireModeling– Prediction ofRubberAbrasion– Failure ofClassicalElasticityinAuxeticFoams– Sealing ForceMeasurement:Characterizing Low TemperatureCapableFluoroelastomer Mechanisms ofParticulateReinforcement of Break Study ofPolymer-Filler Interactions– Nihar Raje Peter Mott Tuckner Materials andConfigurationResponses– Department ofNationalDefense,Canada Compatibility inJetFuel– Queen MaryUniversityofLondon, UnitedKingdom Elastomers atSmallStrains– Rubber ResearchInstituteofMalaysia,Malaysia Artificial NeuralNetwork– Compounds byUsingaGeneticAlgorithmand University Institute ofEngineeringMechanics,Nanchang Modulus forTireRubbers– Dependent ConstitutiveModelofDynamic Bridgestone Co.,Japan Internal Morphologies– Kingdom Wu , QueenMaryUniversityofLondon,United , GraceTechnologyandDevelopment th , U.S.NavalResearchLaboratory , BridgestoneAmericasTireOperations Yoshihiro Morishita Richard Pazur Teck ChengSeng Mengxi Huang Lewis Tunnicliffe Guangchang Ed Cole
,
, Paul
, ,
, 3M , 3M
,
38 36 Co-Chairs: Advances inMaterialsandTireTechnology-AM Session B-Room205 34 33 C-1 11th AnnualStudentColloquium Session C-Room204 59 41 40 39
9:00 a.m. 8:30 a.m. 10:15 a.m. 9:30 a.m. 11:15 a.m. 10:45 a.m. 10:15 a.m. 9:30 a.m. 10:00 a.m. 10:00 a.m. 8:00 a.m. 8:55 a.m. 8:55 J. CalMoreland Christopher Robertson;SyedK.Mowdood;
A CoupledThermo-MechanicalAnalysisfor Worldwide TireSurveys– Advances inFillerDispersionMeasurement– Carbon BlackParticleSize:WhatDoesIt Modified SoybeanOil-ExtendedSBR Technologies forPolymericCord/Rubber Investigation oftheRubber-BrassAdhesion Flocculation inElastomericPolymersContaining Break Break Leszek Nikiel Simon Leimgruber of FictiveDynamicStrain– Resin – Compound withReplacementofResorcinol andHMMM Markets into InnovatorsforGrowthinHighlyCompetitive Global Transforming Scientists, EngineersandResearchers Akron, CollegeofBusinessAdministration- Mechanics, NanchangUniversity,China – Resistance BasedonFluid-StructureInteraction Steady StateTireTemperatureandRolling ExxonMobil ChemicalCo. “Mean”? – Polymer Engineering Isayev Compounds andVulcanizates– University ofTwente,TheNetherlands Adhesion inTireApplications– Leoben GmbH,Austria Layer UsingtheOlefin-MetathesisMethod– Eastman ChemicalCompany Nanoparticles: JammingandtheNewConcept Keynote Speaker, Influence ofKevlarEEonTruck-Bus RadialBeltSkim Mengxi Huang , TheUniversityofAkron,Department Narendra Khandekar Tyler Gruber , Sid Richardson Carbon & Energy Co. , SidRichardsonCarbon&EnergyCo. , InstituteofEngineering Dr. R.RayGehani , PolymerCompetenceCenter , BirlaCarbon , IITKharagpur, India Christopher Robertson Walter H.Waddell – TheUniversityof Andre Louis Avraam I.
,
,
,
186 45 2:30 p.m. X_Butyl I4565P - a New Class of Butyl Rubber 3:00 p.m. Break from Lanxess for Inner Liner Applications –
Kevin Kulbaba, LANXESS th 56 3:15 p.m. Investigation of Composition and Processing Technical Meeting Parameters on Mechanical Properties of 46 2:50 p.m. New THIXON Primer and Cover Technology Magadiite/SBR Composites – Yating Mao, for Automotive Rubber-to-Substrate Bonding – University of South Carolina Roger A. Cassell, Dow Automotive Systems 57 3:45 p.m. Properties and Structure of SBR/BR Blends and Compounds Ultrasonically Treated in Single Screw 3:10 p.m. Break Extruder – Tian Liang, The University of Akron
47 3:25 p.m. New Rotors for High Silica Mixing – Richard 58 4:15 p.m. Study of Processing Via Gamma Rays and Jorkasky, Kobelco Stewart Bolling, Inc. Further Shear for Bromobutyl Rubber Recycling – Sandra Regina Scagliusi, Instituto de Pesquisas Energéticas e Nucleares – IPEN, Brazil 48 3:45 p.m. A Greener Route to Disperse Carbon Black in Rubbers in Absence of Process Oil – Golok Nando, Indian Institute of Technology Thursday Morning Kharagpur, India October 16th 49 4:05 p.m. Functionalized Micronized Rubber Powder – Characterization and Dynamic Properties – Chad Jasiunas, Lehigh Technologies, Inc. Session A - Room 206 Elastomers…Focus on Innovation - AM 50 4:25 p.m. The Effect of Binder Systems on Dispersion Chair: Jim McGraw Quality – Nicole Hershberger, Polymerics, Inc.
60 8:00 a.m. Recent Advances in EPDM and Dynamically 51 4:45 p.m. A Metallocene EPDM Grade for Use in Vulcanized Thermoplastic Elastomers – P.S. Automotive and Industrial Sponge Applications Ravishankar and Maria D. Ellul, ExxonMobil – Brian Burkhart, ExxonMobil Chemical Chemical Co. Company
61 8:30 a.m. Innovative Coatings from Low Molecular Weight Session B - Room 205 EPDM – Zhiyong Zhu, Lion Copolymer Geismar, LLC Advances in Materials and Tire Technology - PM Co-Chairs: Christopher Robertson; Syed K. Mowdood; 62 9:00 a.m. EPDM with High Strength, Resilience and J. Cal Moreland Fatigue Resistance of NR Also Demonstrates Superior Heat Aging Properties – Pete Spanos, Lanxess 52 1:00 p.m. On the Silanization Kinetics and Compound Properties in Silica Filled Rubbers – C. Jeffrey 9:30 a.m. Break Lin, Momentive Performance Materials Inc. 63 9:45 a.m. Improving the Crack Growth Resistance in 53 1:30 p.m. Investigations of Highly Dispersible Silica Types EPDM Compounds with X_Butyl Ionomer – Jon and Silane Types in a “Green” OTR Cut Resistant Bielby, LANXESS Tire Tread Application – Louis Gatti, Evonik Corp. 64 10:15 a.m. Propylene-Based Elastomers Extended with 54 2:00 p.m. Incorporating and Optimizing Performance of Polyalphaolefins – N. Dharmarajan, ExxonMobil Micronized Rubber Powder and Functionalized Chemical Micronized Rubber Powder in SSBR/Silica- Silane Tire Treads – Frank Papp, Lehigh 65 10:45 a.m. Novel Blends of Nitrile Butadiene Rubber and Technologies, Inc. in-Situ Synthesized Thermoplastic Polyurethane-Urea: Preparation Method, Characterization and Properties – Muhammad 55 2:30 p.m. Study of Compatibility and Miscibility for Tahir, Leibniz-Institut für Polymerforschung Polymers and Copolymers Based on Butadiene Dresden e.V., Germany and Isoprene – Adel Halasa, The University of Akron College of Polymer Science
INTERNATIONAL ELASTOMER CONFERENCE 51
UFS corp. profile.qxd 7/27/2006 3:46 PM Page 2
Reconditioned and guaranteed 150 mm Krupp 16/1 pin barrel extruder with hydraulic clamp and strip type calender feed head.
custom equipment & more
NEW 12" 10/1 HOT MELT extruder manufactured with a hydraulically actuated air over oil quick clamp with swing away style head. Manufactured for PVC reclaim line with an output rate of 10,000 pounds/hour.
Used 10" Farrel hot melt extruder as sent in by customer.
Same 10" Farrel hot melt extruder in final stages of re-manufacturing.
UNITED FEED SCREWS, LTD. (330) 798-5532 / Fax: (330) 798-5548 / 487 Wellington Avenue, P.O. Box 9433, Akron, Ohio 44305 www.unitedfeedscrews.com Corporate Profile Section 113
Mach_and_Equip_CLASS_LIST.indd 322 8/8/2011 2:39:52 PM