Sculptors' Catalogues Are Shown on Our Website

Sculptors’ Catalogue 2018/2019

Tel: 01635 587430 Fax: 0845 123 2101 tiranti.co.uk Tools, Materials & Studio Equipment for Carving, Modelling, Mouldmaking, Casting & Restoration

catalogue2018Frontcover.p65 1 7/19/2018, 11:11 AM ALEC TIRANTI LIMITED Sculptors’ tools, materials & equipment - established 1895 Shop, Mail Order & Registered Office: 3 Pipers Court, Berkshire Drive, Thatcham, Berkshire, RG19 4ER Tel: 01635 587430 Fax: 0845 123 2101 e-mail: [email protected] website: www.tiranti.co.uk London Shop: 27 Warren Street, London W1T 5NB Tel / Fax: 020 7380 0808 LIABILITY Prices are shown alongside each Above this weight goods can be sent by Goods sent by Post: Claims for non- Every care is taken in the manufacture of product, but please check by phone or on Parcel Force: Mainland UK (except receipt, damage or shortages should be the tools, materials and equipment that our website that they are the latest prices. Scottish Highlands) - up to 25 kg = £7.00. notified by phone as soon as possible we sell. Any product which appears to Prices are shown both excluding and Road Carrier: Mainland UK - up to and confirmed in writing, if requested, be faulty should be returned to us carriage- including VAT. Bulk discounts are also 25kg = £7.00, above this weight additional within 30 days of delivery. paid. If the item proves to be faulty, we shown. All goods will be supplied at the charges apply. Very heavy orders can will exchange or repair and refund prices ruling at the time of despatch, unless be sent on a pallet at a much cheaper rate SHOP PAYMENTS carriage. No liability, however, can be otherwise agreed in writing. - please contact us for a quote. For Payments may be made by cash, accepted for injury, loss, accident or Scottish Highland locations, UK Off-shore MasterCard, Visa or Maestro. Cheques damage, whether to property or persons, Mail Orders can be placed with a cheque, Islands or for Overseas Orders - please are accepted in the shops only against a arising out of or in connection with any bank draft, postal order, or by credit / contact us for a quote. Please note that bank card or by prior arrangement. tools, materials or goods supplied by us. debit card: MasterCard, Visa or Maestro P/F and the road carrier will require a (Maestro issued by non-UK banks cannot signature. RISK AND TITLE Important Notice be accepted for mail order). Cheques The risk in the goods shall pass to the Whilst we are happy to give general totalling over £100 take 10 working days VAT buyer on delivery, but the title to the goods advice about the use of our products, it to clear before goods are sent. For credit All orders to be despatched within the shall not pass to the buyer until payment should be noted that it is your / debit card orders, please sign your order UK will incur VAT. This must be charged has been made of the full contract price. responsibility to satisfy yourself as to their and include your card number and other on the carriage/postage and packing fee In the case of non-payment, we shall be suitability for your particular application information as required, please see under as well as on the goods. EC Countries entitled to repossess or trace the goods or and it is advisable that you carry out a “How to Order” below. Educational are also charged VAT unless a VAT proceeds of sale in the hands of the buyer, test to verify their suitability for your Establishments, Museums and other number is quoted. Orders sent to other Liquidator or Receiver, or third party. proposed application. Official Bodies should send their own overseas locations will not be charged Official Order Form - by Fax is VAT. Our catalogue prices are shown both RETURNS The illustrations and definitions of goods acceptable. excluding and including VAT. If we have sent incorrect items in error, shown in our catalogue and on our VAT Number: GB 840 9050 42. we will of course exchange them as soon website are intended as a guide to buyers, Please note that some Hazardous or as practicable. Other than this, we regret and we cannot be held liable in law for Flammable Goods must be sent by ORDERING OUTSIDE THE UK that we cannot accept the return of any any inaccuracies. Due to our policy of road carrier whatever their weight. These We are able to export our goods to most perishable materials, such as plaster, continuous improvement, we reserve the include: Polyester Resin; Liquid Hardener countries. Payment from overseas must cement, resin, rubber, etc. under any right to alter the specification of tools, for Polyester Resin; Polyurethanes; be by Sterling Bank Draft, drawn on a circumstances. This rule is strictly equipment and tool sets without Epoxy Resins; Cupra; Antiquing Fluid; London Clearing Bank, or by Credit Card observed for the protection of all notification. We will of course keep details Acetone; Low Fire Glaze and Thinners. (MasterCard or Visa). Except for EC customers. We would not normally accept in our catalogue and on our website as up Countries, goods to other countries and the return of videos / DVDs, unless faulty. to date as possible. CARRIAGE / POSTAGE the Channel Isles are not subject to VAT. Other items, if not required and in unused Carriage is charged according to the condition, can be returned to us within 14 Every care is taken to ensure the packed weight of your order. A nominal CLAIMS days, carriage-paid by you, for credit. accuracy of details and prices in this packing fee is included in the carriage For damages, Shortages or Non- catalogue (and on our website). Prices price. Goods will normally be despatched delivery. Parcels received in bad HOURS OF BUSINESS: charged are those ruling at date of upon receipt of your order, if items are in condition should be signed for as Thatcham Shop despatch, errors and omissions excepted. stock. “received damaged”. Monday to Friday: 8.30am to 5pm. Saturday: 9.30am to 1pm. MAIL ORDER (Thatcham Only) Examples of Carriage Prices: Goods sent by Carrier: Claims for London Shop: Payment should accompany orders from In mainland UK - Packets of up to 1kg goods received damaged should be Monday to Friday: 9am to 5.30pm customers who do not have an account are normally sent by Royal Mail Post. telephoned to us within 24 hours of receipt. Saturday: 9.30am to 1pm. with us. Alternatively, we can send a Charges are now determined by weight Claims for non-delivery of goods and We are closed: Sundays, Bank pro-forma invoice showing the exact cost and volume, please refer to our website shortages should be made as soon as Holidays and from Christmas Eve to of goods ordered. for typical examples. possible but not later than 14 days from New Year. Please telephone for exact date of despatch. opening hours.

How to Order ORDERING ON ORDERING ORDERING ORDERING THE INTERNET BY PHONE BY FAX BY POST You can place your order via the internet Call: 01635 587430 Please fax your order to: Please send your order and payment to: 24 hours a day. Visit our website at: 8.30am to 5.30pm Monday - Friday 0845 123 2101 Alec Tiranti Ltd, 3 Piper Court, www.tiranti.co.uk 9.30am to 1pm Saturday Berkshire Drive, Thatcham, Berkshire, RG19 4ER You will find information about ordering, Please include your name & address, daytime phone number, and, if paying by credit Company info and full catalogue or debit card, the expiry date, valid from date, security number (last 3 digits on signature including latest prices, products,many strip); for Maestro cards also the issue number. Remember to allow for carriage costs. colour photos & product info. Please phone if you require a carriage quote or if you have any queries. Catalogue: 2018/2019 © Alec Tiranti Ltd, Thatcham,Berkshire, RG19 4ER

catalogue2018IFC.p65 1 7/19/2018, 10:54 AM Contents

Books & Videos ...... 2

Woodcarving ...... 11

Stonecarving ...... 18

Mallets & Hammers ...... 22

Files & Abrasives ...... 23

Studio Equipment & Armatures ...... 31

Ceramics equipment & glazes...... 36

Modelling Materials ...... 46

Modelling Tools ...... 50

Mouldmaking...... 62

Casting ...... 66

Restoration & Finishing ...... 76

Sundries & Health & Safety ...... 92

Index ...... 94

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 1

catalogue2018a.p65 1 7/25/2018, 12:46 PM BOOKS & VIDEOS WOOD & ST ONE CAR VING CONTEMPORARY STONE SCULPTURE MANUAL OF TRADITIONAL by Dona Meilach WOODCARVING How to create modern stone sculpture, by P N Hasluck giving specific step-by-step instructions, An extensive book of woodcarving, deal- describing various types of stone, how to ing thoroughly with tools and their care, select and transport it, how to carve with carving techniques, and giving many hand tools, electric and pneumatic tools, designs for carving reliefs and figures for methods of finishing. 211 pages, 340 furniture. 568 pages, index, 1146 photos photos & 17 colour plates. 18 x 25.5cm, and working drawings, 16.5 x 23.5cm, paper, 1970. paper, 1911, reprinted 1988. £21.99 000-312 £18.99 000-190

LETTERS SLATE CUT THE ART OF LETTER by David Kindersley & Lida Lopes CARVING IN STONE Cardozo by Tom Perkins Workshop philosophy and practice in the This book portrays the age-old craft making of letters. A Sequel. The quality of alongside practical tuition, it guides the slate, where and how it is quarried, novice through the basics of drawn choosing the right piece, preparing for the lettering and making simple designs, for job. Advice to the beginner. Cutting in the more experienced explains detail, decorative finishes, fixing the proportional systems for classical lettering finished pieces. 42 pages of text with 86 and designing letterform variations. Topics drawings & 5 photos, followed by a include instruction on setting up easels, section of 56 photos. 19 x 25cm, revised the tools required, types of stone and edition 1991, paper. finishing techniques. £12.95 000-230 £25.00 000-235

DIRECT STONE SCULPTURE CARVING THE HUMAN FIGURE by Milt Liebson STUDIES IN WOOD & STONE Techniques and insights into creativity from by Dick Onians one of America’s foremost sculptors and A thorough grounding for the woodcarver teachers. Types of stone are discussed and sculptor in stone, in the skills needed appropriate for beginners, basic tools and to carve the nude successfully. He ex- techniques, and for the advanced sculptor plains the basics of anatomy, and uses detailed information on power tools and clay modelling to demonstrate how bones, their use, methods of lamination and repair. muscles and fat contribute to the outward Detailed photos take you from the rough shape. 165 pages, over 200 photos mostly stone to the polished and mounted piece. in colour. 21 x 27.5cm, paper, 2001. 192 pages, hundreds of photos, 22 x £16.99 000-401 39cm, cloth, 2nd Edition revised and expanded, 2001. £38.50 000-275

DIRECT WOOD SCULPTURE: TECHNIQUE, INNOVATION by Milt Liebson The appreciation of wood as a medium for THE BOOK OF sculpture, and the practical ins and outs of WOODCARVING: TECHNIQUE, sculptural technique. An illustrated history DESIGNS & PROJECTS of direct wood sculpture is explored by C M Sayers. together with a vital resource for those Beginner’s book on woodcarving, seeking to create sculpture in wood. A covering incised carving, relief carving, complete description of the qualities and wall brackets, book ends, picture frames. types of wood, tools (both hand and 118 pages, 34 projects, 33 photos. 20cm power), techniques, finishing, x 27cm, paper, 1978. complements discussions of the art form £11.99 000-490 and philosophy. By the author of the very successful book Direct Stone Sculpture. 160 pages, 209 photos, 22cm x 29cm, boards, 2001 £34.99 000-276

2 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 2 7/25/2018, 12:46 PM SCULPTURE TECHNIQUES

LOST-WAX CASTING by Wilburt Feinberg Edited and illustrated by Jim Byrne. LEARN TO CARVE IN THE Outlining the basic techniques of lost-wax ROUND casting, and describing the equipment by Andrew Thomas. required to carry out the process Designed to develop an understanding of successfully. The text explains how the form, artistic creativity and technical equipment can be made quite easily and knowledge in woodcarving. With 7 with little expense, using local labour and projects that increase in difficulty that natural resources. 74 pages, 85 drawings, introduce and build on important 31 photos. 18 x 25.4cm, paper, 1994. techniques for beginners to learn, practice £12.95 000-185 and adopt. Projects include both abstract and real-life studies with supplimentary guidance on tools, wood species, principles of design and types of finish. 200 pages, full colour illustrations. 21cm x 28cm, paper, 2012. PEWTER DESIGNS AND TECH- £16.99 000-520 NIQUES by Fleur Greniur An essential guide for novice and experienced pewtersmiths, this title explores the heritage and contemporary nature of pewter. Written will full introduction to materials, equipment and tools and step- by-step guides to working with pewter plus ideas to help develop your own designs. 22 x 26.5cm, Hardback, 2010 £19.95 000-780

FLORAL WOODCARVING by M Sutter SCULPTURE : Full size patterns and complete instructions THE ART AND THE PRACTICE for 21 projects, accompanied with detailed notes and expert advice. 48 pages, 21 (with the Riace Bronze Supplement) line drawings and 21 photos. 21 x 28cm, by Nigel Konstam paper, 1985. With step-by-step illustrations, the book £7.99 000-510 covers the various techniques of sculpture - modelling, carving wood, plaster, clay, casting, etc. There is an additional section in this revised edition on his most recent discoveries relating to Ancient Greek casting techniques. The chimney he discovered on the Acropolis Rock in Athens (probably where Phidias melted bronze for his work) may change our ideas about Greek methods of casting, while a new proof shows that the Greeks started their life-size bronzes from waxes cast from living models. 228 pages, CARVING CLASSIC FEMALE profusely illustrated with photos and some FIGURES IN WOOD drawings. 3rd revised edition, 19 x by Ian Norbury 25.5cm, paper, 2002. £16.99 000-250 A How-to reference for carvers and sculptors' with two step-by-step projects which include reference photos, bandsaw pat- DIRECT METAL SCULPTURE terns and full colour photos with instruc- CREATIVE TECHNIQUES & tion on the process from start to finish. It APPRECIATION also goes into detail on picking the right by Dona Z Meilach tools, the right wood and applying the A revised and expanded 2nd Edition of perfect polish. 63 pages, 200+ photo- this highly successful book. Retaining all graphs and drawings, 22cm x 28cm, the techniques and inspiration of the first paper, 2004 edition, and new chapters update the £14.00 000-770 history of direct metal sculpture over the last 25 years. There are sections on the impact of the computer exploring the importance of computer aided design, and the impact of the internet for marketing one’s art. By the author of the successful book Contemporary Stone Sculpture. 248 pages, 115 colour and 475 black and white photos. 18cm x 26cm, boards, 2001 £38.50 000-313

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 3

catalogue2018a.p65 3 7/25/2018, 12:49 PM MATERIALS AND METHODS OF SCULPTURE THE PORTRAIT IN CLAY by J C Rich by Peter Rubino. A reprint of the 1974 edition. Although A complete step-by-step guide to some information is now dated, this still sculpting the portrait in clay. Covering remains the most comprehensive refer- the planes of the head, clay, tools, ence work ever published on sculpture equipment; featuring in detail firing, patinas, techniques and materials, and is an es- mounting. 160 pages, 281 illustrations, sential reference book to have on the shelf, 21 in colour. 21 x 28cm, paper, 1997. particularly as it is now a reasonably £22.99 000-465 priced paperback. 416 pages, 17 drawings, excellent index, 62 pages of photos. 16.5 x 23.5cm,1988. £16.95 000-450

MODELLING AND MODELLING THE FIGURE IN SCULPTING THE HUMAN CLAY FIGURE by B Lucchesi by E Lanteri A sculptor’s Guide to Anatomy. Sculpture This classic book by Rodin’s teacher by Bruno Lucchesi, text and photographs covers modelling the human head and by Margit Malmstrom. Covering tools figure. 159 pages, 309 illus, 13.5 x 20cm, and materials, the skeleton, muscles, the paper, originally 2 volumes (1902/1903), female figure. 144 pages, 250 black and reprint 1985 in 1 volume. white illustrations, 21 x 28cm, paper, £15.99 000-270 1980. £18.99 000-280

MODELLING AND SCULPTING MODELLING THE HEAD IN CLAY ANIMALS by B Lucchesi Lucchesi demonstrates the technique of by E Lanteri modelling a head in clay from the armature Reprint of one of the three volume work to capturing the light in the eyes - roughing originally published in 1911. Lanteri was in, modelling, refining and finishing each professor of sculpture at the Royal feature shown in step-by-step College. The other two volumes are photographs. Text and photographs by available as a single volume reprint under Margit Malmstrom. 21 x 28cm, paper, the title Modelling and Sculpting the 1979. Human Figure (see item below). 233 £18.99 000-290 pages, 203 illus. 13.5 x 20cm, paper, 1985 reprint. £17.99 000-260

THE ART OF EARTH AND FIRE by Andrew Sinclair SCULPTURAL MATERIAL IN Book one: Design principles, proportion THE CLASSROOM & anatomy describes a refreshingly new by Peter Clough approach to the creation of figarative Peter Clough discusses how to sculpture, itgives an empowering and successfully help children make sculptural profound knowledge base to engage and forms using clay, plaster, wire wood and inform newcomers and more experienced found objects. Includes practical sculptors' in equal measure. Working from information on bonding agents, storage, simple foundations you are taken through tools and techniques as well as how to design and composition, measurement incorporate work into curriculum topics. and anatomy offering variations to highlight 96 pages, 15.5 x 23cm, paper, 2007 and realism before completion of a reprint. figarative piece. 15.5 x 23cm, paper, 2017. £17.99 000-255 £32.99 000-291

4 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 4 7/30/2018, 8:53 AM PORTRAIT SCULPTING : MOULDMAKING & CASTING ANATOMY & EXPRESSIONS IN By Nick Brooks CLAY Written in a clear, practical style this book by Philippe & Charisse Faraut gives invaluable information for artists, With over 550 photographs this book model makers & sculptors. Covering the features a progressive series of exercises, topics of plaster waste moulding, silicone, from anatomical modelling of muscle hot melt vinyl rubber & clay press structure through to finishing details such moulds. Also includes: casting from a life as hair and skin texture. Includes model, wax casting, polyester resin & individual sections on facial features and glass fibre, cold cast resin metal casting the mechanics of expression. There are & ciment fondu. 176 pages, 41 line draw- also three DVDs by this artist (details on ings, 203 colour photographs. 22 x 27cm. page 8). 214 pages, 22.5cm x 28.5cm. Hardback, 2005. Hardback, 2004. £19.95 000-550 £50.43 000-725

ADVANCED MOULDMAKING & MASTERING PORTRAITURE : CASTING ADVANCED ANALYSIS OF THE By Nick Brooks FACE SCULPTED IN CLAY This second title looks in greater detail by Philippe & Charisse Faraut and precision the use of more contempo- In this follow up to Portrait Sculpting: rary moulding and casting techniques, with Anatomy and Expressions in Clay greater emphasis on the final finishing of Phillipe Faraut expands on modelling the casts. Materials such as Jesmonite, life human face with nearly 600 photographs moulding silicones, clay slip and poly- and 100 new sculptures including 64 full- urethane resins / foams now feature. Ad- page images to analyze the requirements vanced mouldmaking and Casting pro- for capturing a likeness. Emphasis is vides a reference to support the confident placed on in-depth study of facial anatomy, use of pre-existing skills, and to introduce critical in developing compelling new techniques and materials 160 pages, expressions. 230 pages. 22.5cm x 41 line drawings, 274 colour photographs. 28.5cm. Hardback. 2008 22 x 27cm. Hardback, 2011. £48.50 000-727 £25.00 000-552 FIGURE SCULPTING VOLUME 1: PLANES & CONSTRUCTION TECHNIQUES IN CLAY THE MOULDMAKER'S by Philippe & Charisse Faraut HANDBOOK In their third book on modelling techniques by Jean-Pierre Delpech and in clay Philippe and Charisse Faraut Marc-Andre Figueres present a comprehensive approach to the This highly illustrated and technical book complex subject of the human figure. is filled with step-by-step instructions on a Over 700 photos and illustrations are used broad range of mouldmaking and casting to demonstrate series of exercises for the materials. An indispensable guide to the head, torso, arms, hands, legs, feet and process of mouldmaking. 160 pages, full figure that promote rapid progress while 21cm x 28cm. Paper, 2003. learning the anatomy relevant to the 3D £40.00 000-670 artist. Traditional Clay and digital sculptors' will find information on structure, planes balance and other subtleties required to master this art. 229 pages, 22.5cm x 28.5cm. Hardback. 2013 £51.77 000-800

FIGURE SCULPTING VOLUME MODELLING AND SCULPTING 2: GESTURE & DRAPERY IN THE FIGURE CLAY By Tanya Russell by Philippe & Charisse Faraut Founder and principle of the Art Academy Volume 2 of the series addresses the in London, Tanya Russell details the whole issues that arise after the fundamentals of creative process for sculpting the figure, figure sculpting have been grasped. The from conceptual and practical considera- fourth title by Philippe Faraut discusses tions through to finished pieces. The book technique for applying gesture and drapery covers tools, equipment, armatures and to the human form, referencing more than processes for creating realistic, abstract 100 of his scultpures and covering and expressive forms. The title contains attributes like age, gender and ethnicity. many practical exercises in different tech- Demonstrations for modelling are shown niques and uses inspiring examples of with over 600 photographs, additional work from contemporary sculptors, tu- exercises in creating armatures, sketch tors and students of the Art Academy. modelling and the anatomy of modelling 128 pages, 22 x 27.5cm. Paperback, fabric are features of this title 237 pages, 2011. 22.5cm x 28.5cm. Hardback. 2018 £22.99 000-285 £51.77 000-802

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 5

catalogue2018a.p65 5 7/27/2018, 9:10 AM POTTERY

SCULPTING AND HANDBUILDING by Claire Loder MOULD MAKING In this practical overview, artist Claire Loder explains the time-honoured methods by John Colclough of handbuilding, as well as introducing John Colclough carefully explains how the fascinating new approaches of to successfully make and use moulds of contemporary ceramicists. Handbuilding varying complexities, both for industrial offers the opportunity to experiment, and artistic use. Aimed at the student or requiring few tools and allowing intuition practised potter who is new to this area. and imagination to guide work. Basic 128 pages. Many colour photos and techniques of coiling, pinching, working illustrations. 15cm x 23cm, 1999 . with slabs and carving are explained, £15.99 000-610 with discussions on choice of equipment, clay bodies and other essentials such as drying. 128 pages. 19cm x 24.5cm. Paperback. 2013 £20.00 000-625 250 TIPS TECHNIQUES AND TRADE SECRETS FOR POTTERS by Jacqui Atkin PAPER CLAY The indispensible compendium of by Rosette Gault essential knowledge and troubleshooting This versatile material is clearly explained tips. Featuring step-by-step photographs, through making, its uses and firing. With diagrams and clear instructions to guide many inspirational colour photos this book you through each stage of your work and shows off the sculptural nature of paper help with a particular problem. Discover clays. 144 pages. Paperback 15.5cm x shortcuts to rolling faultless coils, building 23.5cm, 2005. the perfect spout and a foolproof method £15.99 000-700 for removing a vessel from the wheel without distorting it. Every section features 'TRY IT' and 'FIX IT' panels, suggesting ways of devloping skill and avoiding common errors. 160 pages. Paperback 20.5cm x 17cm, reprinted 2016. £17.99 000-665

THE GLAZE BOOK SLIPCASTING by Stephen Murfitt by Sasha Wardell A comprehensive reference for glaze With clear explanation and demonstrations materials and methods. The first chapter of the techniques involved, this book focuses on glaze materials and firing tech- shows how slipcasting can be adapted niques, while chapter two has fully illus- for the studio workshop. Examples of trated Earthenware recipes, including Ma- work from an international group of artists jolica, Raku and Lustres. Stoneware reci- are used to illustrate the breadth and pes including Sodaware, and finally Por- versatility of this process. 144 pages. celain recipes. Also included are tables Many colour photos and illustrations. 15cm of chemical formulas and cone tempera- x 23cm, 2007 . tures. 288 pages. Spiral bound Hardback £16.99 000-635 20.5cm x 17cm, reprinted 2004. £19.95 000-715

CERAMIC FAULTS AND THEIR REMEDIES CLAY IN THE PRIMARY by Harry Fraser SCHOOL A concise guide dedicated to helping by Peter Clough potters identify the nature, causes and In this book, Peter Clough shows the remedies for ceramic faults in both basics of working with clay, covering production and firing processes. Set out different types, storage, building in four sections: faults arising in clay and techniques and firing - with or without a biscuit ware; from slipcasting processes; kiln. Illustrated throughout with examples in glazing and glazed ware; and problems of what can be achieved by primary appearing after decoration. This second school aged children. 112 pages, 15.5 x edition also contains an expanded chapter 23cm, paper, 2007 reprint. on health and safety. 192 pages. £17.99 000-305 Paperback 19cm x 24.5cm, 2005. £19.99 000-720

6 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 6 7/27/2018, 9:12 AM GILDING & REST ORATION GENERAL

ANTIQUE CHINA RESIN JEWELLERY RESTORATION by Kathie Murphy by Katharine Bewes With 87 inspirational illustrations this book The complete course using Modern Tech- gives a brief history of liquid plastics, nology. The book goes through the mate- with simple guides to mouldmaking, rials and equipment needed, and works colouring and embedding. With clear through the various stages step-by-step instruction on finishing and polishing cast with text and illustrations side by side. 48 resin jewellery, this book shows off the pages, 111 photos, many in colour. A4, versatility of resin. 128 pages, 15.5 x paper, 2000. 23.5cm, paper, 2002, reprint 2006. £16.00 000-065 £17.99 000-710

CELTIC ART: PRACTICAL GILDING THE METHODS OF by P & A MacTaggart A very thorough basic handbook on CONSTRUCTION, gilding, covering tools, gold and gold leaf, by George Bain handling gold leaf, loose and transfer gold Showing the stages of construction of leaf, oil gilding, gesso, water gilding, many Celtic designs. 163 pages, 40 special techniques, varnish, gold bands plates, and many hundreds of drawings. on harpsichords. 74 pages, 33 22.5 x 28.5cm, paper, reprint, 1990. illustrations, 14.5 x 21cm, paper, 1984. £12.99 000-050 £11.95 000-310

THE CRAFTSMANS HAND- BOOK by Cennino d'Andrea Cennini CELTIC DESIGNS This is D.V. Thompsons definitive Eng- AND MOTIFS lish translation of "Il Libro dell' Arte" a by C Davis curious guide to methods used in 15th A treasury of copyright-free Celtic designs century Florence. It describes such lost and motifs in a wide variety of sizes and arts as gilding stone, making mosaics of shapes adapted from authentic Celtic crushed eggshell, making goat glue, and sources. 48 pages, 103 illustrations, regulating your life in the interests of de- 21 x 28cm, paper, 1991. corum. 142 pages, 13cm x 20.5cm, £8.99 000-130 paperback, £10.99 000-755

DECORATIVE ALPHABETS TREATISE OF JAPANNING AND AND INITIALS VARNISHING By Alexander Nesbitt by John Stalker & George Parker Divided into three parts this unusual cata- Reprint of the 1688 standard manual on logue of lettering and initials is invaluable Japanning, Varnishing and Gilding. Text to stone carver's, woodcutter's, artists re-set and f changed to s. 80 pages of and illustrators. Comprising: 123 full- text, 24 plates. 15 x 21cm, paper, 1998. page plates, 91 complete alphabets taken £8.50 990-506 from a range of sources from the 8th century through to the 20th century. 192 pages, 21cm x 28cm, paper, 1987 reprint. £16.99 000-740

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 7

catalogue2018a.p65 7 7/27/2018, 9:14 AM METALWORK FOR CRAFTSMEN CHINESE DESIGNS AND by E F Kronquist MOTIFS A step-by-step guide, including 55 By Marty Noble projects. Covers cutting stock, annealing, A compilation of 361 B&W copyright-free heating, pickling, shallow hollowing, Chinese designs and motifs in a variety planishing, bending, shaping, welding, of shapes and sizes, 76 pages, 21cm x moulds, pattern making, chasing. 202 28cm, paper, 2002 pages, 125 plates, paper, 13.5 x 21.5cm, £10.99 000-745 1972. £12.49 000-240

THE SECRETS OF BRONZE CASTING DESIGNS AND MOTIFS FROM by Sarah Craske INDIA Bronze casting is an exciting and versatile By Marty Noble artform: bronze can be poured or shaped A collection of over 200 B&W copyright- to any required form and this practical free illustrations taken from a diverse ar- book reveals its secrets with step by step ray of sources, including pottery, guides and advice throughout. It focuses mosiacs, manuscripts and more recent on the casting of fine art sculpture, using embroideries and fabrics. 64 pages, the 'lost wax' process. By explaining the 21cm x 28cm, paper, 2004 process and its potential, the book £10.99 000-750 encourages artists to experiment and thereby produce exciting and unexpected results. 144 pages, Hardback, 21.5 x 26cm, 2017. £19.95 000-205

THE COLOURING, BRONZING AND PATINATION OF METALS by R Hughes & M Rowe THE MAKING OF SCULPTURE The definitive book on patination of metals. edited by Marjorie Trusted A manual for the sculptor and fine metal A historical and technical guide to materials worker. Covering cast bronze, cast and methods of European sculpture based brass, copper and copper plate, gilding on the collections at the V&A. This title metal, sheet yellow brass, silver and focuses on areas such as wax, bronze, silver plate. Deals with materials and also wood, plaster, stone, semi-precious Health and Safety. 200 colour illustrations materials and a brief look at reproductions of samples, many drawings and technical deliberately made to deceive. 192 pages, references, bibliography. 372 pages, 21 21.5cm x 27cm. Paperback, 2007. x 29cm, boards, 1991. £24.99 000-765 £48.00 000-200

METAL CASTING : CONTEMPORARY PATINATION APPROPRIATE TECHNOLOGY By Ronald D. Young IN THE SMALL FOUNDRY Second edition of step by step intructions by Steve Hurst for preparing, creating and applying 50 classic patina formulas. Nearly every Technical introduction to small-scale non- patina method is covered including hot, ferrous casting, providing information and cold, buried, wrapped, fumed and paste advice for metalworkers, engineers, and patinas.Colour plates are provided for each all who are interested in non-ferrous metal patina. Young describes recommended casting on a small scale. Illustrated equipment, application tips and methods instructions on how to make equipment and sealing considerations for indoor and using local materials, and on the various outdoor environments. 200 pages, 21cm casting techniques. 227 pages, x 29cm. Hardback, 2016. 141drawings, 7 photos. 18 x 25.4 cm, £48.00 000-805 paper, 1996. £19.95 000-210

8 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 8 7/27/2018, 9:28 AM VIRTUAL POSE 4 HANDBOOK OF ORNAMENT By Mario Henri Chakkour by F S Meyer The next best thing to working with a live A grammar of art, industrial and model for artists who don't have access architectural designing in all its branches to studio sessions. The latest edition to for practical as well as theoretical use. the virtual pose range contemporary, This book is set up into subjects (whereas action and classic poses. Using 6 female the Speltz book is in styles and periods). & 2 male models. Complete with Mac/ 548 pages, 3002 illustrations, 13.5 x 20cm, PC compatible CD-ROM with 36 full- paper, 1957. figure, high resolution colour QuickTime £17.99 000-320 VR poses. Each can be rotated through 360º around the axis, 36 views per pose, able to zoom & they are printable from each angle. 25.5 x 25.5cm, 80 pages. Hardback. 2008. (VAT applies due to CD) £21.66 (plus VAT = £25.99) 000-762

VIRTUAL POSE DUO By Mario Henri Chakkour THE STYLES OF ORNAMENT As Virtual Pose 3 but with 6 models paired by A Speltz in male/female, male/male and female/ From Antiquity to the 19th Century. 647 female double figure poses. Complete pages, 400 plates, 3765 illustrations. 14 with Mac/PC compatible CD-ROM x 21cm, paper, 1959. showing 35 Double figure, high resolution £21.99 000-500 colour QuickTime VR poses. Each can be rotated through 360º around the axis, 36 views per pose, able to zoom & they are printable from each angle. 25.5 x 25.5cm, 420 colour and b & w photographs. Hardback. 2006. (VAT applies due to CD) £22.59 (plus VAT = £27.10) 000-760

DVDS & VIDEOS ANIMALS IN MOTION by Eadweard Muybridge STEP-BY-STEP 183 plates containing over 4000 individual FACIAL LIFECASTING photographs from the famous Muybridge with John Woodbridge Collection, illustrating horses, dogs, cats, A 75 minute Video. This is literally a step-by-step video illustrating lions, kangaroos, deer and 28 other the creative and technical processes relating to facial lifecasting. species. 21 x 28cm, cloth, 1957. The video goes from the very first preparations, through mixing the £42.99 000-375 alginate, making the mould, to taking a plaster cast to produce the final lifecast. There is a booklet included to complement the video, which includes checklists and Key Steps; the latter provides essential guidance for all lifecast artists but in particular to those working towards accreditation in units of the NVQ Media Make-up and Hair standards.

001-125 DVD £18.65 £22.38

THE HUMAN FIGURE IN MOTION by Eadweard Muybridge STEP-BY-STEP PROSTHETIC MOULD MAKING Sequences taken from the original eleven with John Woodbridge volume work Animal Locomotion and A 145 minute Video. The creation of ultra-realistic sculptures published in 1955 as The Human Figure and the reproduction of those sculptures as high accuracy in Motion, which should be on the shelf of two-part plaster moulds. This Video shows the step-by-step every artist. 309 full page plates procedure for creating a variety of prosthetic sculptures and containing 4,789 photos showing the nude moulds. A booklet is also enclosed giving further information, male and female figure in 163 different key steps, and sources of supply. 1999. types of action. 21 x 28cm, cloth. £37.99 000-380 001-120 DVD £22.15 £26.58

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 9

catalogue2018a.p65 9 7/27/2018, 9:31 AM TECHNICAL BOOKLETS THE ART OF SCULPTING with Philippe Faraut PLASTER WASTE-MOULDING, A three volume series featuring Philippe Faraut, who for the past twenty years has worked in materials such as wood, stone, bronze and wax. Here we see him CASTING AND LIFE CASTING demonstrate techniques in his favourite medium, clay. A Manual for the Student. by Martin Sharpe Illustrated Technical Booklet on plaster waste-moulding techniques, making two- In Volume 1, Children, Philippe shares piece moulds using brass fencing, clay his step-by-step methods of construction, wall techniques, making a multi-piece establishing volume, form and detail. waste mould of a life size standing figure. Philippe also shows his own techniques Also covers plaster casting and for catching and correcting common reinforcing. The second part covers life- mistakes. Suitable for beginners or casting using alginate. 52 pages, 81 experienced sculptors. illustrations. A5 size. 1990. Children (89 mins) 990-500 £3.50 no VAT 001-112 DVD £32.82 £39.38 THE SILICONE RUBBER Volume 2, Expressions and Facial BOOKLET Construction, focuses directly on the Cold Cure Silicone Rubber individual features of expression. With for Mould Making rapid exercises Philippe also Covering the various types of silicone demonstrates how volume changes with rubbers, & how they are used. Includes different age, gender and ethnicity. This block moulds, skin moulds, one-piece, volume also includes demonstrations in two-piece, open moulds, and a two-piece hollowing and firing techniques. mould of a four-legged animal. The booklet Expressions and Facial also has sections on casting in white Construction (110mins) metals, a summary of the Centricast system, miniature modelling and creating 001-114 DVD £35.21 £42.25 a master figure. 25 pages, 30 illustrations. A5 size. Revised and updated in 2015.

Volume 3, Men. In this third volume 990-501 £2.50 no VAT Faraut focuses on the differences in structure, facial weight distribution and the mechanics of aging in men. FLEXIBLE MOULDS WITH HOT Men (111mins) MELT RE-USABLE VINYL - VINAMOLD & GELFLEX 001-116 DVD £45.23 £54.27 Dealing in detail with how to use Vinamold and Gelflex hot melt re-usable rubber. 15 Techniques of Sculpture: Geometry pages, 33 illustrations. A5 size, 5th revised in the clay portrait. edition, reprinted 1996. In this DVD Philippe offers an appraoch based on simple geometric shape, 990-502 £2.50 no VAT allowing control and quick progression of a piece without affecting the creative process. Features a bonus video short "metamorphosis" Geometry in the clay CASTING IN CIMENT FONDU portrait. by E Folkard, FRBS Giving all the information needed on 001-118 DVD £40.69 £48.82 materials and techniques, with drawings by the author. 21 pages, 14 drawings, A5 size, 1983 revised 1999. Techniques of Sculpture: Torso in Clay 990-504 £2.00 no VAT This tutorial demonstrates two different approaches for modelling the human torso in clay. In the first Philippe begins with construction of the bone structure of a male THE POLYESTER RESIN torso on which is applied each individual BOOKLET muscle, a method based on the precise Glass Fibre, Cold Cast Resin Metals, use of measurements to achieve a solid Clear Casting Resin, Embedding structure. The second part focuses on the Revised edition. Dealing in detail with the female torso and a rapid method through basics of using polyester resins and glass the construction of planes. Each exercise fibre, including using fillers, measuring out is taken to completion and demonstrates quantities, embedding, what the different finishing techniques. resins do, pigments, Health and Safety. The booklet also covers casting a portrait 001-130 DVD £39.22 £47.06 head and a four-legged animal. 29 pages, 22 illustrations, A5 size, 1995.

990-505 £2.65 no VAT We regret we are unable to accept the return of videos or DVDs once the seal has been broken

10 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 10 7/27/2018, 9:34 AM WOODCARVING STUBAI WOODCARVING TOOLS are hand forged from top quality special alloy steel and heat treated to HRC 58-60 for high edge- holding ability and highest quality blades. All blades are fully polished, and the cutting edges hand sharpened. The inside sweeps are finely ground for easy sharpening. Stubai tools are fitted with octagonal handles which have an internal steel ferrule to prevent the handle from splitting. Tools are inspected for quality at every stage of manufacture. Illustrations show approximate size and shape of sweeps. WOODCARVING TOOLS: STRAIGHT

NO.1 STRAIGHT CHISEL

2 mm 550-102 £18.98 £22.77 4 mm 550-104 £18.12 £21.75 NO.6 STRAIGHT GOUGE 6 mm 550-106 £18.12 £21.75 10 mm 550-110 £18.12 £21.75 2 mm 550-602 £15.16 £18.20 12 mm 550-112 £20.50 £24.60 4 mm 550-604 £15.16 £18.20 16 mm 550-116 £20.40 £24.48 6 mm 550-606 £15.16 £18.20 20 mm 550-120 £19.57 £23.48 10 mm 550-610 £15.16 £18.20 25 mm 550-125 £20.60 £24.74 12 mm 550-612 £16.12 £19.35 30 mm 550-130 £25.62 £30.74 16 mm 550-616 £16.12 £19.35 40 mm 550-140 £31.22 £37.46 20 mm 550-620 £18.97 £22.76 50 mm 550-150 £36.54 £43.85 25 mm 550-625 £22.01 £26.41 30 mm 550-630 £24.48 £29.37 NO.2 STRAIGHT SKEW CHISEL 40 mm 550-640 £32.18 £38.61 50 mm 550-650 £41.88 £50.25 2 mm 550-202 £15.23 £18.28 4 mm 550-204 £15.23 £18.28 6 mm 550-206 £15.23 £18.28 NO.7 STRAIGHT GOUGE 10 mm 550-210 £15.23 £18.28 12 mm 550-212 £16.42 £19.70 2 mm 550-702 £15.16 £18.20 16 mm 550-216 £16.42 £19.70 4 mm 550-704 £15.16 £18.20 20 mm 550-220 £19.21 £23.06 6 mm 550-706 £15.16 £18.20 25 mm 550-225 £20.60 £24.74 10 mm 550-710 £15.16 £18.20 12 mm 550-712 £16.12 £19.35 16 mm 550-716 £16.12 £19.35 NO.3 STRAIGHT GOUGE 20 mm 550-720 £18.96 £22.75 25 mm 550-725 £22.01 £26.41 2 mm 550-302 £15.88 £19.05 30 mm 550-730 £24.48 £29.37 4 mm 550-304 £15.88 £19.05 40 mm 550-740 £32.18 £38.61 6 mm 550-306 £15.88 £19.05 50 mm 550-750 £41.88 £50.25 10 mm 550-310 £15.88 £19.05 12 mm 550-312 £16.87 £20.24 16 mm 550-316 £16.87 £20.24 NO.8 STRAIGHT GOUGE 20 mm 550-320 £19.84 £23.81 25 mm 550-325 £23.04 £27.65 2 mm 550-802 £18.12 £21.75 30 mm 550-330 £25.62 £30.74 4 mm 550-804 £17.32 £20.79 40 mm 550-340 £33.64 £40.37 6 mm 550-806 £17.32 £20.79 50 mm 550-350 £43.82 £52.59 10 mm 550-810 £18.12 £21.75 12 mm 550-812 £20.50 £24.60 16 mm 550-816 £20.50 £24.60 NO.4 STRAIGHT GOUGE 20 mm 550-820 £21.98 £26.37 25 mm 550-825 £23.47 £28.16 2 mm 550-402 £15.88 £19.05 30 mm 550-830 £29.19 £35.03 4 mm 550-404 £15.88 £19.05 40 mm 550-840 £39.01 £46.81 6 mm 550-406 £15.88 £19.05 50 mm 550-850 £51.10 £61.32 10 mm 550-410 £16.09 £19.31 12 mm 550-412 £16.87 £20.24 16 mm 550-416 £16.87 £20.24 NO.9 STRAIGHT GOUGE 20 mm 550-420 £19.84 £23.81 25 mm 550-425 £23.04 £27.65 2 mm 550-902 £18.98 £22.77 30 mm 550-430 £25.62 £30.74 4 mm 550-904 £18.12 £21.75 40 mm 550-440 £33.64 £40.37 6 mm 550-906 £18.12 £21.75 50 mm 550-450 £43.82 £52.59 10 mm 550-910 £18.12 £21.75 12 mm 550-912 £20.50 £24.60 16 mm 550-916 £20.50 £24.60 20 mm 550-920 £21.98 £26.37 NO.5 STRAIGHT GOUGE 25 mm 550-925 £23.17 £27.80 2 mm 550-502 £15.88 £19.05 30 mm 550-930 £29.19 £35.03 4 mm 550-504 £15.88 £19.05 40 mm 550-940 £39.01 £46.81 6 mm 550-506 £15.88 £19.05 50 mm 550-950 £51.10 £61.32 10 mm 550-510 £15.88 £19.05 12 mm 550-512 £16.87 £20.24 16 mm 550-516 £19.84 £23.81 NO.10 STRAIGHT GOUGE 20 mm 550-520 £23.04 £27.65 25 mm 550-525 £25.62 £30.74 10 mm 551-010 £18.12 £21.75 30 mm 550-530 £33.64 £40.37 16 mm 551-016 £20.50 £24.60 40 mm 550-540 £33.64 £40.37 20 mm 551-020 £21.98 £26.37 50 mm 550-550 £43.82 £52.59

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 11

catalogue2018a.p65 11 7/27/2018, 9:52 AM NO.11 STRAIGHT GOUGE NO.24 BENT GOUGE (Sweep 4) 2 mm 551-102 £18.98 £22.77 4 mm 551-104 £18.12 £21.75 6 mm 552-406 £18.12 £21.75 6 mm 551-106 £18.12 £21.75 10 mm 552-410 £18.12 £21.75 10 mm 551-110 £18.12 £21.75 16 mm 552-416 £19.96 £23.98 12 mm 551-112 £20.50 £24.60 20 mm 552-420 £23.23 £27.88 16 mm 551-116 £20.50 £24.60 20 mm 551-120 £21.98 £26.37 25 mm 551-125 £23.17 £27.80 NO.28 BENT GOUGE (Sweep 7)

NO.39 PARTING TOOL ('V') Medium Angle (75º) 6 mm 552-806 £18.52 £22.22 10 mm 552-810 £18.54 £22.25 2 mm 553-902 £21.65 £25.98 16 mm 552-816 £21.52 £25.82 4 mm 553-904 £19.96 £23.95 20 mm 552-820 £26.81 £32.17 6 mm 553-906 £19.96 £23.95 10 mm 553-910 £19.96 £23.95 NO.32 BENT GOUGE (Sweep 11) 12 mm 553-912 £21.65 £25.98

NO.41 PARTING TOOL ('V') Narrow Angle (60º) 6 mm 553-206 £18.52 £22.22 10 mm 553-210 £18.52 £22.22 2 mm 554-102 £21.65 £25.98 16 mm 553-216 £21.52 £25.82 4 mm 554-104 £19.96 £23.95 20 mm 553-220 £26.81 £32.17 6 mm 554-106 £19.96 £23.95 10 mm 554-110 £19.96 £23.95 12 mm 554-112 £21.65 £25.98 NO.44 BENT PARTING TOOL ('V') Narrow Angle - 16 mm 554-116 £24.80 £29.76 (Sweep 41 - 60º)

2 mm 554-402 £23.41 £28.10 4 mm 554-404 £22.87 £27.45 WOODCARVING TOOLS: 6 mm 554-406 £22.87 £27.45 10 mm 554-410 £22.87 £27.45 SALMON BEND WOODCARVING TOOLS: BACKBENT

NO.12 SALMON BEND GOUGE (Sweep 4)

4 mm 551-204 £19.93 £23.91 12 mm 551-212 £20.50 £24.60 16 mm 551-216 £20.50 £24.60 NO.34 BACKBENT GOUGE (Sweep 4) 20 mm 551-220 £23.17 £27.80 6 mm 553-406 £19.48 £23.37 NO.16 SALMON BEND GOUGE (Sweep 7) 12 mm 553-412 £20.50 £24.60 20 mm 553-420 £21.98 £26.37 4 mm 551-604 £19.93 £23.91 12 mm 551-612 £20.50 £24.60 16 mm 551-616 £20.50 £24.60 NO.36 BACKBENT GOUGE (Sweep 6) 20 mm 551-620 £23.17 £27.80 4 mm 553-604 £19.48 £23.37 NO.20 SALMON BEND GOUGE (Sweep 11) 10 mm 553-610 £20.50 £24.60 16 mm 553-616 £21.98 £26.37 2 mm 552-002 £20.10 £24.12 4 mm 552-004 £20.10 £24.12 6 mm 552-006 £20.10 £24.12 NO.38 BACKBENT GOUGE (Sweep 8) 10 mm 552-010 £20.10 £24.12 20 mm 552-020 £23.66 £28.39 6 mm 553-806 £19.48 £23.37 12mm 553-812 £20.50 £24.60 NO.42 SALMON BEND PARTING TOOL ('V') NARROW 20 mm 553-820 £21.98 £26.37 ANGLE - (Sweep 41 - 60º)

2 mm 554-202 £23.41 £28.10 6 mm 554-206 £22.87 £27.45 10 mm 554-210 £22.87 £27.45 WOODCARVING TOOLS: WOODCARVING TOOLS: BENT FISHTAIL

NO.21 BENT CHISEL (Sweep 1) NO.1 FISHTAIL CHISEL

6 mm 552-106 £17.50 £21.00 6 mm 555-106 £14.02 £16.83 12 mm 552-112 £19.48 £23.37 12 mm 555-112 £15.59 £18.71 20 mm 552-120 £21.98 £26.37 20 mm 555-120 £19.01 £22.81

12 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 12 7/27/2018, 12:10 PM NO.4 FISHTAIL GOUGE SET OF 14 Comprising: 12 woodcarving tools plus a chip knife and sharpening stone in a tool roll. 6 mm 555-406 £14.02 £16.83 Tools are: 4mm No.1, 8mm No.2, 16mm No.2, 6mm No.3, 10mm No.3, 20mm No.4, 12 mm 555-412 £15.59 £18.71 14mm No.5, 10mm No.6, 8mm No.8, 3mm No.10, 6mm No.21, 8mm No.39. 20 mm 555-420 £19.01 £22.81

NO.6 FISHTAIL GOUGE

6 mm 555-606 £14.44 £17.33 12 mm 555-612 £16.09 £19.31 20 mm 555-620 £19.65 £23.58

NO.8 FISHTAIL GOUGE

6 mm 555-806 £14.44 £17.33 12 mm 555-812 £16.07 £19.29 20 mm 555-820 £19.65 £23.58 560-214 Set of 14 Woodcarving Tools £236.16 £283.39 CHIP KNIVES SET OF 20 Comprising: 20 woodcarving tools in a tool roll. Straight Tools are: 25mm No.1, 10mm No.2, 20mm No.2, 6mm No.3, 10mm No.3, 16mm No.3, 50mm No.3, 25mm No.4, 10mm No.5, 16mm No.5, 50mm No.5, 25mm No.6, Bent 10mm No.7, 20mm No.7, 6mm No.9, 12mm No.9, 16mm No.9, 25mm No.9, 8mm No.21, 10mm No.39. Double Edge

Bent / Slim

Straight Skew

510-501 Chip Knife: Straight £10.28 £12.33 510-601 Chip Knife: Bent £8.80 £10.56 510-701 Chip Knife: Double Edge £13.83 £16.59 511-501 Chip Knife: Bent / Slim Blade £6.95 £8.34 511-601 Chip Knife: Straight Skew £8.04 £9.65

CARVERS’ ADZES 560-220 Set of 20 Woodcarving Tools £398.18 £477.82

STRAIGHT ADZE NO.2 For roughing out, making flat areas and joints. SUPERSHARP SET 5cm (2") wide. A set of six unshouldered spade tools (7.5cm from ferrule to tip of tool), polished bright, GOUGE ADZE NO.3 fitted with polished rosewood-type mushroom handles, in a plastic wallet. Ideal for light For carving and hollowing out (shaped like woodcarving, and particularly suitable for lino cutting and wood block cutting. The set No.6 carving gouge). 5cm (2") wide. comprises: 8mm Bent Chisel 10mm Bent Skew Chisel 3mm Straight Deep Gouge 10mm Straight Chisel 8mm Bent Shallow Gouge 3mm Bent V Tool

300-158 No.2 Scopas Adze 5cm Straight £65.17 £78.21 300-160 No.3 Scopas Adze 5cm Gouge £85.22 £102.26

WOODCARVING TOOL SETS

Basic woodcarving tool sets for sculpture. All tools are polished and sharpened ready for use. Contents may vary according to availability.

300-126 Supersharp Woodcarving Tools - Set of 6 £57.97 £69.57 SET OF 6 Comprising: 20mm No.2, 6mm No.3, 20mm No.3, 12mm No.5, LINO CARVING KNIVES 10mm No.8, 16mm No.9. Boxed. A set of 6 lino cutting knives, fitted with black handles and brass ferrules. Includes 5mm and 8mm shallow gouges, 3mm and 7mm deep gouges, a 3mm 'V' tool, and an 8mm No.2 chisel.

300-128 Lino Carving Knives - Set of 6 £7.54 £9.05 560-206 Set of 6 Woodcarving tools £100.79 £120.95

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 13

catalogue2018a.p65 13 7/27/2018, 12:17 PM FLEXCUT POCKET KNIVES Mini Palm Set Comprising: 3mm No.3, 3mm No.5, 2mm Woodcarving and Chip Knives, all with polished wooden handles. Not for sale to No.11, 3mm 70º V-Tool, approximate length anyone under the age of 18 years. of tools 5" (12.5cm), blades Are not KN15 KN14 interchangeble KN18 KN13 KN26

KN12

KNL26 560-232 Mini Palm Set £82.15 £98.58

KN11 Sculptors' Set Comprising: 50mm No.3, 35mm No.5, 28mm No.10, 35mm 90º V-Tool. Approxi- mate length of tools 5" (12.5cm), blades are not interchangeble

304-064 Skew Knife (KN11) £22.77 £27.33 304-066 Cutting Knife (KN12) £24.03 £28.83 304-068 Detail Knife (KN13) £23.93 £28.72 304-070 Roughing Knife (KN14) £25.11 £30.13 304-072 Chip Knife (KN15) £23.93 £28.72 304-074 Pelican Knife (KN18) £28.62 £34.34 304-076 Right-Handed Hook Knife (KN26) £26.85 £32.22 304-078 Left-Handed Hook Knife (KNL26) £26.85 £32.22 560-236 Sculptors' Set £138.07 £165.69

Travel Set A small beginners/entry level kit presented KN27 in a tool roll, leaving plenty of space to expand your collection of chisels. Comprising: ABS Handle, 9mm No.3, 8mm No.6, KN32 3mm No.11, 6mm 70º V-Tool, supplied with a 10 pocket tool roll

KN35

304-080 Mini Detail Knife (KN27) £28.05 £33.66 304-082 Detail Skew Knife (KN32) £34.46 £41.35 304-084 Fine Detail Knife (KN35) £33.31 £39.97 560-238 Travel Set (5 piece) £67.79 £81.35

Pocket Knife Roll Tool Rool Space for 4 Flexcut pockets knives. (knife not included) Space for 1 Handle and 19 Blades (chisels not included)

300-096 Pocket Knife Roll £16.34 £19.60

300-098 20 pocket tool roll £23.93 £28.72

FLEXCUT HANDLES 305-002 Draw Knife 3" - with protective sheath (KN25) £45.60 £54.72 Choice of three quick connect handles to fit all Flexcut Carving Chisel blades, blades FLEXCUT TOOL SETS can be changed in seconds with a secure push fit. (Blades supplied seperately) Power Handle ABS Handle Palm Handle Micro Palm Set Comprising: 1mm No.9, 1.5mm No.9, 2.5mm No.5, 1mm 45º V-tool. Approximate length of tools 5" (12.5cm) , blades are not interchangeble.

560-240 Power Handle £18.67 £22.41 560-241 ABS Handle £18.67 £22.41 560-230 Micro Palm Set £88.23 £105.87 560-242 Palm Handle £18.67 £22.41

14 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 14 7/30/2018, 8:54 AM PROFILE SCRAPER SET & HANDLE FLEXCUT CAR VING CHISELS Set of six carving scrapers for removal of uneven surface finishes, roughness left after hand or power carving, excess glue or other unwanted paint or finishes. Interchangeble blades to fit all Flexcut Handles (supplied separately), averagre length Interchangeable Powder Handle included. of chisel is 4/1/4" (10.5cm)

NO.1 STRAIGHT CHISEL (BLADE ONLY)

6 mm 560-243 £16.34 £19.60 13 mm 560-245 £17.51 £21.01 16 mm 560-246 £12.24 £14.68 560-400 Profile Scraper Set & Handle £48.62 £58.34

NO.3 STRAIGHT GOUGE (BLADE ONLY) SHARPENING EQUIPMENT 3 mm 560-249 £18.08 £21.70 9 mm 560-251 £16.34 £19.60 ARKANSAS BENCH STONES 12 mm 560-252 £12.24 £14.68 Natural Arkansas Whetstones are produced from quarried natural Arkansas Stone. 16 mm 560-253 £18.67 £22.41 The Soft grade is Medium, and the Hard grade is Fine. All stones are supplied in a 22 mm 560-254 £20.43 £24.51 cedar box. 28 mm 560-255 £15.68 £18.82 Soft Arkansas works in the same way as a medium man-made stone, and quickly gives a good edge ready for finishing with the fine hard stone. NO.6 STRAIGHT GOUGE (BLADE ONLY) Hard Arkansas is a hard fine finishing stone for putting the final edge on the tool before using the strop. 6 mm 560-256 £18.08 £21.70 20 mm 560-259 £20.43 £24.51

NO.8 STRAIGHT GOUGE (BLADE ONLY)

6 mm 560-261 £18.08 £21.70 10 mm 560-262 £18.67 £22.41 17 mm 560-263 £21.60 £25.92 22 mm 560-264 £15.38 £18.45 302-400 Soft Arkansas Bench Stone 150 x 50 x 13mm £18.61 £22.33 302-405 Hard Arkansas Bench Stone 150 x 50 x 13mm £28.26 £34.34

NO.9 STRAIGHT GOUGE (BLADE ONLY) ARKANSAS SLIPSTONES A variety of small and large slipstones in white hard Arkansas Stone graded as Fine, 1 mm 560-265 £18.67 £22.41 for finishing an edge. Hard Fine Arkansas Veiner Parting Slip. 50mm (2") long. Very fine slip for the NO.11 STRAIGHT GOUGE (BLADE ONLY) smaller tools.

2 mm 560-267 £18.08 £21.70 3 mm 560-268 £17.51 £21.01 5 mm 560-269 £18.67 £22.41 302-380 Hard Arkansas Veiner Parting Slipstone, 50mm £7.63 £9.16

The Pocket Stone is ideal for sharpening small blades and knife blades. Size 100 x 25 45º PARTING TOOL 'V' (BLADE ONLY) x 6mm (4" x 1" x ¼") 4 mm 560-271 £18.67 £22.41 6 mm 560-272 £21.60 £25.92

NO.5 SKEW GOUGE (BLADE ONLY)

14 mm (right) 560-274 £13.21 £15.86 302-430 Hard Arkansas Pocket Stone £10.73 £12.87

Round Edge Slips give a variety of round edges to suit most gouges.

Interchangeable chisels are compact, great for travelling and 302-435 Hard Arkansas RE Slip: 75 x 50 x 6 >1.5mm £15.68 £18.82 allow quick and easy profile changes. 302-440 Hard Arkansas RE Slip: 100 x 50 x 10 > 3mm £22.76 £27.31

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 15

catalogue2018a.p65 15 7/27/2018, 12:32 PM Hard Fine Arkansas Carving Tool Slips, set of four different slips 50 x 22 x 6mm. HONING OIL Lubricates, cleans and revives oilstones that have become clogged with old oil and debris. Honing Oil sharpens as it cleans. In 250ml tin.

Harmful

302-410 Arkansas Slipstones - set of 4 £24.74 £29.69 302-520 Honing Oil 250ml £6.63 £7.95

The Bevel Slip is ideal for most 'V' tools. Size 100 x 13 x 5mm (4" x ½" x 3/16"). BUFF HIDE LEATHER STROP & DRESSING The Oval Slip is ideal for small gouges & large broad shallow gouges; size 100 x 13 The Strop is dressed one side; made from specially prepared buff hide with our own x 5mm (4" x ½" x 3/16") strop dressing, which puts the finest edge on tools. The Dressing is supplied in 100g The Base Point Slip is a long round cone shape suiting many sizes. 100 x 8 > 6mm pots to refresh the strop by working in more paste. (4" x 5/16">¼")

Oval Slipstone Section Bevel Slipstone Section 990-040 Buff Hide Strop Dressed 75 x 250mm (3" x 10") £8.46 £10.15 302-415 Hard Arkansas Bevel Slipstone £10.18 £12.22 990-042 Strop Dressing 100g £4.54 £5.45 302-420 Hard Arkansas Oval Slipstone £17.56 £21.07 302-425 Hard Arkansas Base Point Slipstone £18.25 £21.90 HOLDING DEVICES INDIA BENCH STONE India Combination Bench Sharpening Oil Stone; use with honing fluid. Coarse one side (100 grit) and fine the other (320 grit). Size 200 x 50 x 25mm (8" x 2" x 1"). THE SCOPAS CHOPS The perfect carver’s vice. Made in ash with a heavy duty screw, metal side plates and brass rails. The jaws are lined with cork and buff hide which can be replaced when worn. The Scopas Chops are supplied complete with a specially fabricated bench screw with giant wing nut, to allow the vice to be turned through 360º. Overall length 46cm (18"), height 23cm (9"), maximum opening about 24cm (9½").

302-040 India Bench Stone Combination (200 x 50 x 25mm) £31.15 £37.38

OILSTONE BOX Solid beech box to take 200 x 50 x 25mm (8" x 2" x 1") Bench Stones.

302-050 Oilstone Box (for 200 x 50 x 25mm stone) £13.39 £16.07

SILICONE CARBIDE SLIPSTONES Set of 2 fine silicone carbide slipstones. Large: 114 x 45 x 13 x 5mm, Small: 57 x 22 x 5 x 1.5mm

Spare Cork and Bufffs

990-027 Scopas Chops (Carvers’ Vice) £255.80 £306.96 990-028 Corks and buffs (spare set) £7.82 £9.38 302-150 Silicone Carbide Slipstones - Set of 2 £17.05 £20.46 CARVERS’ BENCH SCREW GOUGE SLIPSTONE Will hold work securely to the bench when carving. They can also be used in Fine red aloxite Kidney gouge slip; suits a variety of sizes. 15 x 50 x 25 x 13mm to combination with our carving stands and bankers. Size 20cm x 1.4cm (8" x ½") 10mm (6" x 2"x 1"x 1/2" to 3/8").

302-140 Kidney Gouge Slipstone Red Aloxite £27.89 £33.47 305-010 Carvers’ Bench Screw 20cm x 1.4cm (8"x½") £33.52 £40.22

16 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 16 7/30/2018, 8:58 AM DIAMOND WHETSTONES PYROGRAPHY

Diapad® Diamond Whetstone is ideal for the final sharpening of stonecarving tools. PYROGRAPH S3 (DISCONTINUED) The two grades of Diamond Impregnated Fabric are mounted on an aluminium base Principally for wood burning and poker work (on wood or leather), the S3 also operates which has four non-slip soft rubber feet. Always use with water. Instruction sheet on a polystyrene cutter. The Pyrograph S3 runs from mains supply and transforms to 12 sharpening is included. Grades Medium / Fine. Volt maximum of 20 Watts. Supplied complete with a holder and one Universal point (No.21). There are two outlets, which can be used simultaneously, or allow alternate use of two points without waiting for one to heat up. There is a switch to increase or decrease power and so the amount of heat. The transformer incorporates a thermal protection device (with automatic re-set) which cuts the current in case of a short circuit. There are a range of points to make differing marks and to suit specific applications. NOTE - Pyrography has now been discontinued from our range, details remain in this catalogue while pyrograph accessories are still available from stock.

314-200 Diamond Whetstone 15cm x 5cm (6" x 2") M / F £49.56 £59.47

Supplied as a set of 3, coarse/medium/fine on a plastic backing15cm x 5cm (6" x 2") a useful, economic way to sharpen TCT chisels as well as woodcarving tools. Blue: Fine Yellow: Medium Red: Coarse

306-010 Pyrograph S3 £74.93 £89.92

PYROGRAPH EXTRA POINT HOLDER

314-205 Diamond Whetstones: Set of 3 - 15 x 5cm (6"x2") £19.06 £22.87 Point holder (fitted with plug for S3) STEEL CABINET SCRAPERS 306-020 Pyrograph Extra Point Holder £9.05 £10.86 Made from hardened and tempered Sheffield Steel; essential for the final working of knotty and difficult grained timbers. The hardened steel has good edge retention but is easily re-sharpened. PYROGRAPH STANDARD POINTS 306-021 Pyrograph Point 21 Universal £5.14 £6.16 306-022 Pyrograph Point 22 Needle £5.14 £6.16 306-023 Pyrograph Point 23 Flat £5.14 £6.16 306-024 Pyrograph Point 24 For Velvet £5.14 £6.16 306-025 Pyrograph Point 25 For Pyrocarving £5.14 £6.16 306-030 Pyrograph Point B21 1mm Ball Point £5.14 £6.16 306-035 Pyrograph Point B22 2mm Ball Point £5.14 £6.16 306-040 Pyrograph Point B23 3mm Ball Point £5.14 £6.16 306-045 Pyrograph Point B24 4mm Ball Point £5.14 £6.16 306-050 Pyrograph Point C23 3mm Circle £5.14 £6.16 306-060 Pyrograph Point T20 Knife Edge £5.14 £6.16 306-065 Pyrograph Point F20 Fork £5.14 £6.16 306-070 Pyrograph Point P20 Filling in £5.14 £6.16 303-020 Cabinet Scraper 125mm x 63 x 1mm (5") £4.29 £5.14 306-075 Pyrograph Point O20 3mm Oval £5.14 £6.16 303-030 Cabinet Scraper 150mm x 63 x 1mm (6") £4.69 £5.62 306-090 Pyrograph Point D24 Half Circle £5.14 £6.16

pyrograph points

21 22 23 24 25 B22 B23 B24 C23 C24 T20 F20 P20 O20 O24 R20 D24 E23 E24

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 17

catalogue2018a.p65 17 8/7/2018, 11:58 AM STONECARVING CARBON ST ONECARVING TOOLS MALLET HEAD BROAD CLAWS 990-078 MH Broad Claw 11mm - 3 teeth (230mm / 10mm) £9.87 £11.84 Carbon steel hand tools made from high-strength treated steel, working to close 990-080 MH Broad Claw 20mm - 5 teeth (230mm / 10mm) £9.87 £11.84 temperature tolerances using the latest equipment. The two measurements in brackets show tool length and diameter of steel used. MALLET HEAD PUNCH & POINT STONE CHISELS - LIGHT

990-072 MH Stone Punch - Light £7.95 £9.54 990-112 MH Stone Point - Light £7.95 £9.54 313-800 Stone Chisel - Light 4mm (230mm / 8mm) £13.43 £16.11 313-802 Stone Chisel - Light 6mm (230mm / 8mm) £13.43 £16.11 313-804 Stone Chisel - Light 8mm (230mm / 8mm) £13.43 £16.11 313-806 Stone Chisel - Light 10mm (230mm / 8mm) £13.43 £16.11 FINE CLAWS 313-808 Stone Chisel - Light 12mm (230mm / 10mm) £13.43 £16.11 313-810 Stone Chisel - Light 15mm (230mm / 10mm) £13.43 £16.11 313-812 Stone Chisel - Light 18mm (230mm / 10mm) £14.12 £16.94

STONE CHISELS - HEAVY

313-850 Fine Claw 18mm - 4 teeth (180mm / 10mm) £20.31 £24.37 313-852 Fine Claw 18mm - 4 teeth (180mm / 12mm) £21.11 £25.33 313-830 Stone Chisel - Heavy 15mm (230mm / 12mm) £10.07 £12.08 313-854 Fine Claw 18mm - 6 teeth (180mm / 14mm) £22.65 £27.18 313-832 Stone Chisel - Heavy 18mm (230mm / 14mm) £10.26 £12.31 313-860 Fine Claw 30mm - 4 teeth (220mm / 16mm) £23.26 £27.91 313-834 Stone Chisel - Heavy 25mm (230mm / 16mm) £12.28 £14.73 313-836 Stone Chisel - Long Heavy 25mm (300mm/16mm) £13.14 £15.76 FIRESHARP GOUGE

MALLET HEAD CHISELS

313-272 Firesharp Gouge 6mm (210mm / 8mm) £25.27 £30.32 313-274 Firesharp Gouge 13mm (210mm / 13mm) £28.85 £34.62 990-052 MH Stone Chisel 6mm (230mm / 10mm) £8.74 £10.48 313-276 Firesharp Gouge 20mm (200mm / 13mm) £30.26 £36.31 990-054 MH Stone Chisel 13mm (230mm / 10mm) £8.74 £10.48 313-278 Firesharp Gouge 25mm (200mm / 13mm) £34.14 £40.96 990-055 MH Stone Chisel 20mm (230mm / 10mm) £8.74 £10.48

CLAW BIT HOLDERS & CLAW BITS MALLET HEAD GOUGES A claw tool with changeable claw bits. Ideal for roughing out work. The bits are available in coarse style and fine style. In three sizes - 13mm (½"), 25mm (1"), and 38mm (1½")

990-067 MH Stone Gouge 6mm (230mm / 10mm) £9.40 £11.28 Coarse 990-069 MH Stone Gouge 13mm (230mm / 10mm) £9.40 £11.28 990-070 MH Stone Gouge 20mm (230mm / 10mm) £9.40 £11.28

MALLET HEAD BULLNOSE CHISELS 990-151 Claw Bit Holder 13mm (½") £17.91 £21.49 990-152 Claw Bit Holder 25mm (1") £19.85 £23.82 990-153 Claw Bit Holder 38mm (1½") £22.83 £27.39

312-010 Claw Bit Coarse 13mm (½") £0.37 £0.44 312-020 Claw Bit Coarse 25mm (1") £0.44 £0.52 312-030 Claw Bit Coarse 38mm (1½") £0.65 £0.78

10+ of any one Claw Bit - less 10% discount 990-095 MH Bullnose Chisel 6mm (230mm / 10mm) £8.74 £10.48 990-097 MH Bullnose Chisel 13mm (230mm / 10mm) £8.74 £10.48 990-098 MH Bullnose Chisel 20mm (230mm / 10mm) £8.74 £10.48

18 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 18 8/7/2018, 12:16 PM MARBLE POINTS FORT TCT HEAVY CHISELS Much heavier duty TCT chisels; the tungsten is well bolstered up in the shank.

313-870 Marble Point - Light (250mm / 12mm) £7.29 £8.74 313-872 Marble Point - Medium (300mm / 14mm) £9.61 £11.53 313-874 Marble Point - Heavy (350mm / 16mm) £12.69 £15.22

STONE PUNCHES

313-440 Fort TCT Heavy Chisel 4mm (175mm / 10mm) £16.36 £19.63 313-445 Fort TCT Heavy Chisel 6mm (175mm / 10mm) £16.97 £20.36 313-450 Fort TCT Heavy Chisel 8mm (175mm / 10mm) £18.12 £21.74 313-880 Stone Punch - Light (250mm / 18mm) £7.56 £9.07 313-455 Fort TCT Heavy Chisel 10mm (175mm / 10mm) £18.93 £22.71 313-882 Stone Punch - Medium (250mm / 20mm) £7.74 £9.28 313-460 Fort TCT Heavy Chisel 12mm (175mm / 10mm) £22.15 £26.58 313-465 Fort TCT Heavy Chisel 15mm (175mm / 12mm) £24.11 £28.93 PITCHERS 313-470 Fort TCT Heavy Chisel 20mm (175mm / 12mm) £29.30 £35.16 PHENIX TCT CHISELS Slim profile of the Europ chisel matched with the heavier duty bolstering of the Fort chisel, with a longer shank and a harder grade of tungsten making it suitable for hard 313-892 Pitcher 40mm x 8mm (200mm / 20mm) £23.62 £28.34 stones. 313-894 Pitcher 50mm x 8mm (200mm / 20mm) £24.37 £29.24

STONECARVING STARTER KIT Supplied in a Brown Suede Tool Roll a 9 piece Starter Set comprising;

Set of 3 Diamond Whetstones, Claw Bit Holder (1"), 3 x Claw Bits Coarse (1"), Marble Point Light, 6mm Light Stone Chisel, 18mm Heavy Stone 313-350 Phenix TCT Chisel 4mm (190mm / 10mm) £16.36 £19.63 Chisel, 13mm Bullnose Chisel, 313-355 Phenix TCT Chisel 6mm (190mm / 10mm) £16.97 £20.36 Medium Dummy Mallet. 313-360 Phenix TCT Chisel 8mm (190mm / 10mm) £18.12 £21.74 313-365 Phenix TCT Chisel 10mm (190mm / 10mm) £19.51 £23.41 313-370 Phenix TCT Chisel 12mm (190mm / 10mm) £22.15 £26.58 313-375 Phenix TCT Chisel 15mm (190mm / 12mm) £26.57 £31.88 313-380 Phenix TCT Chisel 20mm (190mm / 12mm) £33.72 £40.46

TCT BROAD CLAWS Broad Claws with well bolstered TC inserts.

313-315 Stone Carving Kit - Set of 9 £125.76 £150.91

TUNGSTEN TIPPED TOOLS 313-475 TCT Broad Claw 10mm 2 teeth (190mm/10mm) £28.93 £34.71 Tungsten Carbide* Tipped (TCT) tools for cutting limestone and rough cutting 313-480 TCT Broad Claw 14mm 3 teeth (190mm/14mm) £34.58 £41.49 granite. Shanks are in octagonal steel. (*see special note). The two measurements in 313-485 TCT Broad Claw 18mm 4 teeth (190mm/18mm) £38.84 £46.60 brackets show the tool length and diameter of steel used. TCT POINTED CLAWS MALLET HEAD ADAPTER Pointed Claws with well bolstered TC inserts. Mallet head adapter for TCT Europ, Fort and Phenix chisels. Changes the standard hammer end to a round Mallet head, allowing use with nylon/plastic or wooden mallets. Fits directly onto the conical end of the chisel and stays in place with a strong friction fit.

313-340 Mallet Head Adapter £6.45 £7.74

EUROP TCT CHISELS 313-490 TCT Pointed Claw 14mm - 3 teeth (190mm/14mm) £34.58 £41.49 313-495 TCT Pointed Claw 18mm - 4 teeth (190mm/18mm) £37.72 £45.26

TCT POINTS & PUNCHES The round points have well bolstered TC inserts. The punches have flat chisel ends with well bolstered inserts making a very robust tool.

tct point tct punch 313-400 Europ TCT Chisel 4mm (190mm / 10mm) £14.83 £17.79 313-405 Europ TCT Chisel 6mm (190mm / 10mm) £16.24 £19.48 313-500 TCT Point - Light (190mm / 10mm) £18.12 £21.74 313-410 Europ TCT Chisel 8mm (190mm / 10mm) £16.46 £19.75 313-505 TCT Point - Medium (210mm / 16mm) £30.53 £36.63 313-415 Europ TCT Chisel 10mm (190mm / 10mm) £16.88 £20.25 313-510 TCT Point - Heavy (210mm / 18mm) £34.58 £41.49 313-420 Europ TCT Chisel 12mm (190mm / 10mm) £18.52 £22.22 313-425 Europ TCT Chisel 15mm (190mm / 12mm) £19.33 £23.19 313-515 TCT Punch - Light (210mm / 14mm) £28.93 £34.71 313-430 Europ TCT Chisel 18mm (190mm / 12mm) £20.47 £24.56 313-520 TCT Punch - Medium (210mm / 14mm) £30.53 £36.63 313-435 Europ TCT Chisel 20mm (190mm / 12mm) £20.47 £24.56 313-525 TCT Punch - Heavy (210mm / 18mm) £34.58 £41.49

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 19

catalogue2018a.p65 19 8/7/2018, 12:35 PM TCT PITCHER A very substantial tool in 25mm octagonal steel and a heavy 10mm thick tungsten STONCARVING ANCILLARIES carbide insert. SMITH & MASON SQUARE Smith and Masons square available in imperial measurement (18" x 24") and metric (500mm x 600mm)

313-530 TCT Pitcher 40mm (220mm / 25mm) £55.48 £66.57

TCT LETTERING CHISELS Chisels have straight sided blades for lettering only; do not attempt to carve with them, as they are not backed off and may wedge in the stone. Available in 7 sizes.

990-046 Smith & Masons Flat Steel Sq. (Imperial) £51.44 £61.72 313-100 TCT Lettering Chisel 3mm (175mm / 10mm) £24.72 £29.66 18" x 24" 313-110 TCT Lettering Chisel 5mm (175mm / 10mm) £24.92 £29.90 990-048 Smith & Masons Flat Steel Sq. (Metric) £51.44 £61.72 313-120 TCT Lettering Chisel 6mm (175mm / 10mm) £28.07 £33.68 500mm x 600mm 313-130 TCT Lettering Chisel 8mm (175mm / 10mm) £28.72 £34.46 313-140 TCT Lettering Chisel 10mm (175mm / 10mm) £26.00 £31.20 313-150 TCT Lettering Chisel 11mm (175mm / 12mm) £26.25 £31.50 RUBBING BLOCKS 313-160 TCT Lettering Chisel 12mm (175mm / 12mm) £30.03 £36.03 A range of carborundum stones for rubbing down stone prior to polishing, avaiable in 5 grades from #20 to #120 grit. 150mm x 50mm x 50mm dimension. *Special Note Tungsten Carbide Tipped tools are inspected before leaving the factory. If TCT tools are wrongly used, they may break (e.g. using the corner of the tool only, using the tip to remove less material than the tip, using any method of cooling after grinding). At no time of manufacture are faulty materials used, and all tools have to pass through various stages of manufacture. It is impossible for the manufacturer to replace a broken tool free of charge or to repair them. If you are not sure how to carve with TCT tools, please seek expert advice.

HEAVY BULLNOSE TCT Well bolstered tungsten tipped bullnose chisels. 302-130 Rubbing Block #20 grit (150mm x 50mm x 50mm) £29.46 £35.35 302-132 Rubbing Block #36 grit (150mm x 50mm x 50mm) £28.05 £33.66 302-134 Rubbing Block #60 grit (150mm x 50mm x 50mm) £28.05 £33.66 302-136 Rubbing Block #80 grit (150mm x 50mm x 50mm) £28.05 £33.66 302-138 Rubbing Block #120 grit (150mm x 50mm x 50mm) £28.05 £33.66

FEATHERS & WEDGES For splitting larger pieces of stone, supplied as sets of three (2 Feathers, 1 Wedge). 313-532 Heavy Bullnose 6mm TCT (200mm / 8mm) £29.06 £34.87 313-534 Heavy Bullnose 13mm TCT (210mm / 13mm) £31.96 £38.35 313-536 Heavy Bullnose 20mm TCT (200mm / 13mm) £38.95 £46.74 313-538 Heavy Bullnose 25mm TCT (200mm / 13mm) £42.25 £50.70

CARBIDE TIPPED SCRIBERS 313-065 Feathers & Wedges (Italian) 130mm x 22mm £7.08 £8.49

990-044 Carbide Tipped Scriber (220mm / 25mm) £13.74 £16.48

ITALIAN TCT CLAWS (HAND) Range of hand claws finished to the same exacting standard as the pneumatic ended 313-070 Feathers & Wedges 95mm x 20mm £25.00 £30.00 Claws.

DIAMOND WHETSTONE

Diapad® Diamond Whetstone is ideal for the final sharpening of stonecarving tools. The two grades of Diamond Impregnated Fabric are mounted on an aluminium base which has four non-slip soft rubber feet. Always use with water. Instruction sheet on sharpening is included. Grades Medium / Fine.

313-956 3 Tooth Italian TCT Claw - 6mm £16.41 £19.69 313-958 5 Tooth Italian TCT Claw - 10mm £17.78 £21.33 313-959 3 Tooth Italian TCT Claw - 15mm £21.04 £25.24 313-960 4 Tooth Italian TCT Claw - 15mm £20.36 £24.43 313-961 5 Tooth Italian TCT Claw - 20mm £26.05 £24.43 313-962 6 Tooth Italian TCT Claw - 20mm £26.05 £31.26 314-200 Diamond Whetstone 15cm x 5cm (6" x 2") M / F £45.20 £54.24

20 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 20 8/7/2018, 12:40 PM PNEUMATIC STONECARVING EQUIPMENT

PNEUMATIC HAMMER - 12.5MM

Light

Medium

Light - Has a hit rate of 8,000/min when running with an air consumption of 80 litres/min. Medium - Has a hit rate of 7,500/min when running at 112 litres/min.

Both hammers use standard air hose fixings and operate tools with a 12.5mm pneumatic end. On/off functions are regulated by the air supply for ease of use, giving full control over the job in hand.

Health and Safety - Operating mechanical / vibrating equipment can be hazardous. Precaution should be taken to protect eyes, ears and lungs from dust. Vibrating equipment can cause damage to muscles / nerves and should not be used for long periods of time. Take regular breaks. 313-902 Pneumatic Hammer (Light) 27mm x 138mm £185.75 £222.90 313-903 Pneumatic Hammer (Medium) 30mm x 145mm £192.47 £230.96

TCT CHISEL - PNEUMATIC END BUSH - PNEUMATIC END

313-930 Pneumatic TCT Chisel - 4mm £10.46 £12.55 313-910 4 Tooth Pneumatic Bush - 15mm Square £26.27 £31.52 313-932 Pneumatic TCT Chisel - 6mm £10.44 £12.52 313-912 9 Tooth Pneumatic Bush - 15mm Square £30.88 £37.05 313-934 Pneumatic TCT Chisel - 10mm £12.44 £14.92 313-914 16 Tooth Pneumatic Bush - 15mm Square £37.97 £45.56 313-936 Pneumatic TCT Chisel - 15mm £13.89 £16.66 313-916 9 Tooth Pneumatic Bush - 20mm Square £35.15 £42.18 313-938 Pneumatic TCT Chisel - 18mm £16.98 £20.37 313-918 16 Tooth Pneumatic Bush - 20mm Square £38.38 £46.05 313-940 Pneumatic TCT Chisel - 25mm £27.17 £32.60 313-920 25 Tooth Pneumatic Bush - 20mm Square £49.73 £59.67

TCT CLAW - PNEUMATIC END ROUNDED CHISEL - PNEUMATIC END

313-950 Pneumatic Rounded Chisel - 5mm £13.60 £16.32 313-951 Pneumatic Rounded Chisel - 6mm £15.73 £18.87 313-952 Pneumatic Rounded Chisel - 7mm £13.79 £16.54 313-942 3 Tooth Pneumatic TCT Claw - 10mm £16.41 £19.69 313-954 Pneumatic Rounded Chisel - 10mm £18.86 £22.63 313-944 4 Tooth Pneumatic TCT Claw - 15mm £17.75 £21.30 313-946 4 Tooth Pneumatic TCT Claw - 20mm £21.96 £26.35 313-948 6 Tooth Pneumatic TCT Claw - 20mm £24.32 £29.18

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 21

catalogue2018a.p65 21 8/7/2018, 12:46 PM MALLETS & HAMMERS

BOUCHARD / BUSH HAMMERS For modelling the surface of stone, specially for use on large flat surfaces where the Bush Hammer will be found to reduce the stone with minimum of labour. There are two sizes of bush hammer, handled, with replaceable inserts, which are also in two grades. These are not Tungsten Tipped, but are suitable for most stones including granite.

Beech Hardwood HDP Nylon Dummy Lump

BEECH MALLETS In kiln-dried beech, hot laminated; the handle is normally turned as an integral part of the body. Available in five sizes, weights approximate. The 20mm inserts are held by a taper, and the insert drops directly onto the taper. 310-110 Beech Mallet 75mm (3") (approx. 225-275g) £14.97 £16.96 310-120 Beech Mallet 90mm (3½") (approx. 350-425g) £16.34 £19.60 310-130 Beech Mallet 100mm (4") (approx. 550-625g) £20.79 £24.94 310-140 Beech Mallet 115mm (4½") (approx. 700-775g) £20.76 £24.91 310-150 Beech Mallet 125mm (5") (approx. 975g-1.1kg) £30.41 £36.49

HARDWOOD CARVERS’ MALLETS Turned from very hard, dense, wood (Boxwood / Lignum Vitae), fitted with ash handles. Hard wood mallets keep best in a plastic bag when not in use; humidity can be restored by wiping head with a damp cloth. Under no circumstances should mallets be treated in any way with Linseed or any other oil; this will destroy the fibre structure 313-600 Bush Hammer Insert Holder 20mm square £38.31 £45.97 of the wood and the mallet will start to disintegrate in use. weights approximate: 313-605 Bush Insert 20mm square 25 teeth £9.16 £10.99 NOTE - Currently unavailable 313-610 Bush Insert 20mm square 36 teeth £9.16 £10.99 310-220 HW Carvers’ Mallet 75mm (3") (approx. 375g) £ tbc £ tbc 310-230 HW Carvers’ Mallet 90mm (3½") (approx. 555g) £ tbc £ tbc The 40mm inserts are held by an expanding spigot, operated by knocking in a tapered 310-240 HW Carvers’ Mallet 100mm (4") (approx. 815g) £ tbc £ tbc pin (which is knocked out again to replace the head).

HDP CARVERS’ MALLETS Turned carvers’ mallets in high density polyethylene. These mallets are almost indestructible even when used with stonecarving tools, and they have a good balance. In one size only.

310-400 HDP Carver’s Mallet 90mm (3½") (approx. 520g) £30.49 £36.58

NYLON MALLETS Very hard-wearing, heavy duty, turned nylon mallet, with wooden handle. In one size only, weight approximate:

310-312 Nylon Mallet 125mm (4") 650g (approx.) £55.29 £66.34 313-650 Bush Hammer Insert Holder 40mm square £63.30 £75.96 310-314 Nylon Mallet 125mm (5") 1 kg (approx.) £60.80 £72.96 313-655 Bush Insert 40mm square 25 teeth £10.76 £12.91 310-316 Nylon Mallet 125mm (6") 1.4kg (approx.) £73.49 £88.18 313-660 Bush Insert 40mm square 36 teeth £10.76 £12.91

DUMMY MALLETS SPARE HANDLES AND WEDGES The Scopas Dummy Mallet head is made from malleable iron for safety, and fitted with Hammer Handles for Lump Hammers - small for 1 lb, and large for all other sizes. an ash handle. For use with woodcarving and stonecarving tools; ideal for use when Dummy Mallet Handles, same for all sizes of Dummy Mallet. letter carving. Available in three sizes (approximate weights shown). Wedges: No.2 (small) for: 1 lb Lump Hammers, No.4 (large) for: all larger Lump Hammers and all Dummy Mallets. 990-005 Dummy Mallet - Small (460g / 1 lb) £18.72 £22.46 990-006 Dummy Mallet - Medium (655g / 1½ lb £19.82 £23.78 902-050 Ash Hammer Handle - small £1.56 £1.87 990-007 Dummy Mallet - Large (1.175kg / 2½ lb) £24.22 £29.06 902-048 Hickory Hammer Handle - large (10") £3.03 £3.63 902-056 Dummy Mallet Handle £3.67 £4.40 ITALIAN DUMMY MALLETS 990-030 No.2 Hammer Wedges (small), (packet of 6) £1.77 £2.12 Available in three sizes (approximate weights shown) 990-031 No.4 Hammer Wedges (large), (packet of 6) £2.88 £3.45

310-320 Italian Dummy Mallet - Small (431g) £10.18 £12.21 STUBAI OCTAGONAL BEECH HANDLES 310-325 Italian Dummy Mallet - Medium (652g) £10.85 £13.02 Original replacement octagonal beech handles 310-330 Italian Dummy Mallet - Large (1.010kg) £11.52 £13.82 for the complete range of Stubai chisels and gouges. Available in three sizes, small for LUMP HAMMERS 4-12mm widths, medium for 12-30mm widths The Scopas Lump Hammers are for use with Hammer Head stone carving tools. The and large for 30-50mm widths. head is made from malleable iron for safety, and will be found to be of excellent balance and very durable. Used by many generations of sculptors. Supplied fitted with ash handle to ensure good grip with slight spring.

990-010 Lump Hammer 1 lb (540g) £17.18 £20.61 300-130 Octagonal Beech Handle - small (4-12mm) £2.12 £2.55 990-011 Lump Hammer 1½ lb (780g) £22.00 £26.40 300-132 Octagonal Beech Handle - medium (12-30mm) £2.37 £2.84 990-012 Lump Hammer 2 lb (950g) £24.96 £29.95 300-134 Octagonal Beech Handle - Large (30-50mm) £3.98 £4.77

22 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 22 8/7/2018, 12:54 PM FILES & ABRASIVES

20cm FILES, RASPS & RIFFLERS 309-081 No.121 Italian Riffler 20cm (8") £15.85 £19.02 309-082 No.122 Italian Riffler 20cm (8") £15.85 £19.02 309-083 No.123 Italian Riffler 20cm (8") £15.85 £19.02 ITALIAN HAND CUT RIFFLERS Hand cut Italian rifflers for stone, marble and wood. Not recommended for sandstone or 309-084 No.124 Italian Riffler 20cm (8") £15.85 £19.02 granite. Medium cut with an excellent temper and ideal shapes. Available in 9 shapes 309-085 No.125 Italian Riffler 20cm (8") £15.85 £19.02 in 5 sizes. These tools are extremely popular and demand can sometimes exceed 309-086 No.126 Italian Riffler 20cm (8") £15.85 £19.02 309-087 No.127 Italian Riffler 20cm (8") £15.85 £19.02 supply. *Special Note- A new series of Italian Diamond Rifflers appears on page 25 309-088 No.128 Italian Riffler 20cm (8") £15.85 £19.02 309-089 No.129 italian Riffler 20cm (8") £15.85 £19.02

15cm 25cm 309-061 No.121 Italian Riffler 15cm (6") £13.12 £15.74 309-101 No.121 Italian Riffler 25cm (10") £17.18 £20.61 309-062 No.122 Italian Riffler 15cm (6") £13.12 £15.74 309-102 No.122 Italian Riffler 25cm (10") £17.18 £20.61 309-063 No.123 Italian Riffler 15cm (6") £13.12 £15.74 309-103 No.123 Italian Riffler 25cm (10") £17.18 £20.61 309-064 No.124 Italian Riffler 15cm (6") £13.12 £15.74 309-104 No.124 Italian Riffler 25cm (10") £17.18 £20.61 309-065 No.125 Italian Riffler 15cm (6") £13.12 £15.74 309-105 No.125 Italian Riffler 25cm (10") £17.18 £20.61 309-066 No.126 Italian Riffler 15cm (6") £13.12 £15.74 309-106 No.126 Italian Riffler 25cm (10") £17.18 £20.61 309-067 No.127 Italian Riffler 15cm (6") £13.12 £15.74 309-107 No.127 Italian Riffler 25cm (10") £17.18 £20.61 309-068 No.128 Italian Riffler 15cm (6") £13.12 £15.74 309-108 No.128 Italian Riffler 25cm (10") £17.18 £20.61 309-069 No.129 Italian Riffler 15cm (6") £13.12 £15.74 309-109 No.129 Italian Riffler 25cm (10") £17.18 £20.61

18cm 30cm 309-071 No.121 Italian Riffler 18cm (7") £14.59 £17.50 309-121 No.121 Italian Riffler 30cm (12") £20.32 £24.38 309-072 No.122 Italian Riffler 18cm (7") £14.59 £17.50 309-122 No.122 Italian Riffler 30cm (12") £20.32 £24.38 309-073 No.123 Italian Riffler 18cm (7") £14.59 £17.50 309-123 No.123 Italian Riffler 30cm (12") £20.32 £24.38 309-074 No.124 Italian Riffler 18cm (7") £14.59 £17.50 309-124 No.124 Italian Riffler 30cm (12") £20.32 £24.38 309-075 No.125 Italian Riffler 18cm (7") £14.59 £17.50 309-125 No.125 Italian Riffler 30cm (12") £20.32 £24.38 309-076 No.126 Italian Riffler 18cm (7") £14.59 £17.50 309-126 No.126 Italian Riffler 30cm (12") £20.32 £24.38 309-077 No.127 Italian Riffler 18cm (7") £14.59 £17.50 309-127 No.127 Italian Riffler 30cm (12") £20.32 £24.38 309-078 No.128 Italian Riffler 18cm (7") £14.59 £17.50 309-128 No.128 Italian Riffler 30cm (12") £20.32 £24.38 309-079 No.129 Italian Riffler 18cm (7") £14.59 £17.50 309-129 No.129 Italian Riffler 30cm (12") £20.32 £24.38

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 23

catalogue2018a.p65 23 8/7/2018, 12:59 PM ITALIAN HAND CUT RIFFLERS (CONT.) ITALIAN HAND CUT RASPS Hand cut Italian rasps for stone, marble and wood. Not recommended for sandstone or granite. Medium cut with an excellent temper. 130

131

309-130 No.130 Italian Riffler 16.5cm (6½") £12.51 £15.01 309-131 No.131 Italian Riffler 16.5cm (6½ ") £12.52 £15.02

ITALIAN BRACELET RASP Medium cut bracelet rasp measuring between 6.4cm (2½") and 8.2cm (3¼") diameter.

307-075 Italian Rasp15cm (6") (handled) £21.29 £25.54 307-076 Italian Rasp 20cm (8") (handled) £24.85 £29.82 307-077 Italian Rasp 25cm (10") (handled) £30.60 £36.72 307-078 Italian Rasp 30cm (12") (handled) £41.25 £49.50

STONE RASPS Machine cut half-round stone rasps. Supplied with fitted safety handle. Available in two sizes. 307-085 Italian Bracelet Rasp (medium) £13.28 £15.93

STAINLESS STEEL RIFFLER SET A set of 8 hand punched stainless steel rifflers in shapes 121 to 128. For use on soft stone, wood, plaster, clay etc. Medium Cut. Approximately 18cm (7") long. Only 307-010 Stone Rasp 25cm (10") (handled) £5.48 £6.57 available as a set of eight in an expanding plastic Tiranti Tool Box. 307-020 Stone Rasp 30cm (12") (handled) £7.12 £8.54

ROUND RASPS Machine cut stone rasp with a 12.7mm (½") diameter. Supplied and fitted with safety handle

307-031 Round Stone Rasp 25cm (10") (handled) £5.46 £6.55

CABINET RASPS Machine cut wood rasps, fine grade only. Flat one side, half-round the other. Supplied with fitted safety handle. Available in three sizes.

307-050 Cabinet Rasp 20cm (8") (handled) £4.91 £5.89 307-060 Cabinet Rasp 25cm (10") (handled) £6.09 £7.30 307-070 Cabinet Rasp 30cm (12") (handled) £7.65 £9.18 309-169 Stainless Steel Rifflers (121-128) Set of 8 in Box £36.39 £43.66 RASP SET Exceptional value set containing one each of the following: flat, rat tail, and half round RIFFLER SET hand punched rasps. All 20cm (8") long, fitted with a plastic handle, and packed in a A series of 8 hand punched rifflers offering exceptional value, for use on wood or soft plastic protective wallet. stone. Offering a variety of different shaped ends. Approximately 19cm (7½") long, coarse cut. Only sold as a set of eight in a protective plastic wallet.

307-080 Rasps - Set of 3 £4.37 £5.24

DIAMOND FILES Diamond coated files of a fine cut (120 grit). The 12" file is flat on both sides, the 10" file is half round.

309-140 Rifflers - Set of 8 £5.84 £7.00 307-380 Diamond File Flat 30cm (12") (handled) £24.15 £28.98 307-382 Diamond File Square 30cm (12") (handled) £12.98 £15.57

24 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 24 8/7/2018, 1:04 PM BRONZE RIFFLERS Riffler files for working bronzes, other metals, cold cast resin metals and ceramics. DIAMOND ABRASIVES Rifflers A-H are 15cm long in medium cut (cut 2). Rifflers I-K are 18cm long and feature a course cut compared to the other versions. ITALIAN DIAMOND RIFFLERS

309-132 No.1 Italian Diamond Riffler 20cm (8") £34.76 £41.71 309-134 No.2 Italian Diamond Riffler 20cm (8") £34.76 £41.71 309-136 No.3 Italian Diamond Riffler 20cm (8") £33.68 £40.41

DIAPAD® is a Patented process of diamond particles attached in dots either in nickel or resin and implanted onto a tough fabric, providing a hard-wearing and fast cutting abrasive, capable of producing exceptional fine finishes rapidly.

DIAPAD® should always be used with water.

DIAPAD® HAND SANDERS Diamond coated hand sanders, mounted on Plastazote foam base. In three grades, good for rubbing down large areas quickly and easily. Used wet. Grades available are: coarse (black), medium (red) and fine (yellow). Approximately 9cm x 5cm (3½" x 2"). 702-200 'A' Bronze Riffler £10.16 £12.19 702-205 'B' Bronze Riffler £10.16 £12.19 702-210 'C' Bronze Riffler £10.16 £12.19 702-215 'D' Bronze Riffler £10.16 £12.19 702-220 'E' Bronze Riffler £10.16 £12.19 702-225 'F' Bronze Riffler £10.16 £12.19 702-230 'G' Bronze Riffler £10.16 £12.19 702-235 'H' Bronze Riffler £10.16 £12.19 702-300 'I' Large Bronze Riffler £18.40 £22.08 702-305 'J' Large Bronze Riffler £18.40 £22.08 702-310 'K' Large Bronze Riffler £18.40 £22.08

NEEDLE FILES Precision needle files. For metals, plastics, ceramics, etc. 308-010 Diapad Hand Sander Coarse (Black) £21.96 £26.35 In Medium cut (cut 2). 10 shapes available singly, or a set of 6 in a plastic wallet. For 308-020 Diapad Hand Sander Medium (Red) £18.47 £22.16 better grip, plastic handles are available. 308-030 Diapad Hand Sander Fine (Yellow) £16.66 £19.99

Round DIAPAD® HAND-E-FILES Diamond coated Hand Files, with durable plastic handles. For abrading those more Square awkward to reach areas quickly and easily. Used wet. Available in 3 shapes in coarse (black), medium (red) and fine (yellow). Threesquare

Warding RECTANGULAR 13mm X 45mm (½" X 1¾") STRAIGHT

Pillar

Slitting

Barrette 308-050 Diapad File Straight Coarse (Black) £7.54 £9.04 308-060 Diapad File Straight Medium (Red) £6.41 £7.69 Knife 308-070 Diapad File Straight Fine (Yellow) £7.16 £8.59

Crossing HALF ROUND 13mm X 45mm (½" X 1¾") STRAIGHT Half Round 703-020 Needle File - Medium: Round £1.43 £1.71 703-030 Needle File - Medium: Square £1.43 £1.71 703-050 Needle File - Medium: Threesquare £1.43 £1.71 703-060 Needle File - Medium: Warding £1.43 £1.71 308-110 Diapad File Half-Round Coarse (Black) £6.96 £8.35 703-080 Needle File - Medium: Pillar £1.43 £1.71 308-120 Diapad File Half-Round Medium (Red) £7.20 £8.64 703-100 Needle File - Medium: Slitting £1.43 £1.71 703-120 Needle File - Medium: Barrette £1.43 £1.71 SLIMLINE 6mm X 63mm (¼" X 2½") STRAIGHT 703-150 Needle File - Medium: Knife £1.43 £1.71 703-160 Needle File - Medium: Crossing £1.43 £1.71 703-170 Needle File - Medium: Half Round £1.43 £1.71 703-300 Needle Files - Medium: Set of 6 £7.27 £8.72

NEEDLE FILE HANDLES 308-140 Diapad File Slimline Straight Coarse (Black) £5.73 £6.87 Screw clamping plastic handle for better grip. 308-150 Diapad File Slimline Straight Medium (Red) £5.79 £6.94 703-355 Needle File Handle £1.91 £2.29

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 25

catalogue2018a.p65 25 8/7/2018, 1:10 PM DIAMOND RIFFLER SET SURFORM A set of 10 titanium coated Diamond Rifflers. Fine cut (180 grit). SURFORM Suform Tools are a good alternative to the plaster rasps for the fast removal of plaster. The standard all purpose blade (5-21-293) and shaver tool blade (5-21-515) also work well on wood, vinyl, thermalite, fibreglass and linoleum and feature side cut teeth for access into corners. The fine blade is used on the same materials but gives a smoother, planed finish. The half round blade is useful for curved surfaces where smooth and quick removal of material is required.

SURFORM PLANERFILE The handle has two positions, so that the tool can be used both as a file and a plane. A range of blades are available, but the Planerfile (5-21-122) comes fitted with the Standard 10" blade. 702-240 Diamond Rifflers - Set of 10 £16.44 £19.72

ABRASIVE CLOTHTH&P & PAPER

ABRASIVE WATERPROOF PAPER Commonly known as wet and dry paper. Normally used for rubbing down marble, soapstone, granite, resins, metals, etc. Available in eight different grits, either singly or in packets of 25 sheets. 5-21-293

5-21-393

5-21-299 314-100 Abrasive Waterproof Paper 120 grit, 1 sheet £0.69 £0.82 314-110 Abrasive Waterproof Paper 150 grit, 1 sheet £0.69 £0.82 314-120 Abrasive Waterproof Paper 180 grit, 1 sheet £0.69 £0.82 314-130 Abrasive Waterproof Paper 240 grit, 1 sheet £0.69 £0.82 314-140 Abrasive Waterproof Paper 320 grit, 1 sheet £0.69 £0.82 5-21-508 314-150 Abrasive Waterproof Paper 400 grit, 1 sheet £0.69 £0.82 314-160 Abrasive Waterproof Paper 600 grit, 1 sheet £0.69 £0.82 704-100 Surform Planerfile (5-21-122) £21.00 £25.20 314-170 Abrasive Waterproof Paper 1200 grit, 1 sheet £0.69 £0.82 704-110 Planerfile Blade Standard Flat 10" (5-21-293) £3.90 £4.68 704-120 Planerfile Blade Fine Flat (5-21-393) £3.63 £4.35 25 sheets + of the same grit - less 15% discount £0.59 £0.71 704-130 Planerfile Blade Half Round (5-21-299) £4.57 £5.48 704-140 Planerfile Blade for Metal & Plastics (5-21-508) £4.72 £5.66 ABRASIVE CLOTH Hermes have brought out this new, extremely hard-wearing abrasive cloth called 406 SURFORM ROUND FILE J-FLEX, which was originally produced for the rubbing down and polishing of Completely round Surform blade with handle and front end handle. Good for working manufactured stainless steel articles. It has been found that it is also a very versatile on complex curved surfaces. abrasive for rubbing down and providing a very fine finish on stone, resin, horn, metal, wood and even paintwork. It is possible to tear the cloth into strips and abrade and polish with a towelling action. In this respect it has become very popular with woodturners and stick makers. The backing is made from soft cotton cloth, and the resin-bonded aluminium oxide coating makes a versatile, flexible, long lasting abrasive; do not use with water. In 1 metre and 50 metre lengths x 100mm (4") wide. Our best seller is a trial pack of 5 x 1 metre pieces (1 of each grade).

704-200 Surform Round File (5-21-297) £10.66 £12.79 704-210 Spare Round File Blade (5-21-291) £5.92 £7.10

SURFORM SHAVERTOOL Useful small Surform tool for cleaning up rough spots, particularly in plaster. Featuring a slightly curved blade for efficient removal of material and to reduce clogging. Works on pull stroke. 315-100 Abrasive Cloth - 5 x 1m mixed £23.76 £28.51 315-120 Abrasive Cloth P120 - 100mm x 1m £5.16 £6.19 315-121 Abrasive Cloth P120 - 100mm x 50m £187.77 £225.32 315-180 Abrasive Cloth P180 - 100mm x 1m £5.60 £6.72 315-181 Abrasive Cloth P180 - 100mm x 50m £192.23 £230.67 315-240 Abrasive Cloth P240 - 100mm x 1m £5.61 £6.73 315-241 Abrasive Cloth P240 - 100mm x 50m £207.01 £248.41 315-320 Abrasive Cloth P320 - 100mm x 1m £5.09 £6.10 315-321 Abrasive Cloth P320 - 100mm x 50m £184.09 £220.90 315-400 Abrasive Cloth P400 - 100mm x 1m £5.09 £6.10 704-250 Surform Shaver Tool (5-21-115) £3.62 £4.34 315-401 Abrasive Cloth P400 - 100mm x 50m £184.09 £220.90 704-260 Spare Shaver Tool Blade (5-21-515) £1.99 £2.38

26 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 26 8/7/2018, 1:23 PM COLLETS BURS, CUTTERS & DRILLS Spare individual collets for the Dremel Drill 3000. DREMEL DRILL

4485 480 481 482 483

525-295 4485 Quick Change Collet Nut Kit £10.28 £12.33 (includes collets 480, 481, 482 & 483)

Above collet available singly for Dremel Drill 3000.

PENDANT DRILL

This flexible shaft, high speed tool is supplied with a foot operated speed controller. Using a DREMEL DRILL 3000 SERIES chuck for holding the tools, it runs from 0 to 15000 High speed tool, variable speed slide (no-load speed 10,000 to 33,000 rpm) rpm, using a rugged bearing construction for smooth • Light, compact and easy to handle, featuring new EZ Twist nose cap running and long life, and a sturdily cast case for • 130 watt motor (1/6 horsepower), 230/240 volt durability. • Double insulated and radio/TV suppressed, CE marked • Shaft lock, Hanger, Dual ballbearing shaft • 15 accessories • Softgrip, Comfort switches, Attachment interface • Integrated hang hook • Padded storage case • Precisely centered 3.2mm (1/8") No.480 chuck collet and wrench for changing bits

525-545 Dremel Drill 3000 Series £47.80 £57.36

DREMEL FLEXIBLE SHAFT Designed to fit all 3000 series dremel drills, allowing greater control for detailed or difficult to reach work.

525-565 AGP Pendant Drill £170.13 £204.15

Also available:- CUTTING WHEEL 32MM Collets - No.481, 2.4mm (3/32") Large 32m carbide cutting wheel for use on ,No.483, 0.8mm (1/32"); No.4485 Wood, Plastics, Composites, Glassfibre, Quick Change Collet Nut Kit; Flexible Carbon Fibre and Stone. Drive Shaft;4486 Dremel Chuck, Suitable for use in Dremel and Pendant drills. Extensive range of accessories. 3.2mm (1/8") shank.

525-547 Dremel Flexible Shaft for Drill 300 £30.06 £36.07

DREMEL CHUCK Keyless drill style chuck for dremel drills, 528-508 Cutting Wheel 32mm £22.91 £27.49 adjustable between 0.4mm - 3.4mm shank diameters. DIAMOND BURS - SETS

525-305 4486 Dremel Chuck (0.4mm-3.4mm) £11.36 £13.63

IMPORTANT WARNING

EYES: Take care to protect your own eyes, and the eyes of those around you when using burs, cutters, wheelbits, etc. in the Dremel drills, flexible drive or any other machine. 529-040 Diamond Burs - Set of 30 (150 grit) 2.35mm shank £12.97 £15.56 DUST: Take care not to inhale dust created when using any of these products 529-045 Diamond Burs - Set of 30 (150 grit) 3.2mm shank £12.87 £15.56 - either extract air or use a suitable mask.

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 27

catalogue2018a.p65 27 8/7/2018, 1:28 PM HIGH SPEED STEEL CUTTERS WOLFRAM TCT CUTTERS Made of high quality steel. All have 3.2mm (1/8") shanks. Can be used for shaping Fast cutting rasps with tungsten carbide metal tips, for use on wood, some ceramics non-metals, plastics and wood. Do not run in excess of 30,000 rpm. and stone. 3.2mm (1/8") shanks

114 115 117 118 125

Cone Cylinder Taper

528-910 Wolfram TCT Cone £18.42 £22.10 528-911 Wolfram TCT Cylinder £18.42 £22.10 528-912 Wolfram TCT Taper £15.50 £18.60 134 144 193 194 196 199

SMALL ENGRAVING CUTTERS 526-114 No.114 High Speed Steel Cutter (pack of 2) £8.29 £9.94 Ideal for engraving, carving and routing in wood, fibre, plastic and metals (not hardened 526-115 No.115 High Speed Steel Cutter (pack of 2) £9.54 £11.44 steel). 2.4mm (3/32") shanks. Do not run in excess of 30,000 rpm. 526-117 No.117 High Speed Steel Cutter (pack of 2) £7.68 £9.21 526-118 No.118 High Speed Steel Cutter (pack of 2) £7.91 £9.49 526-125 No.125 High Speed Steel Cutter (pack of 2) £7.31 £8.77 526-134 No.134 High Speed Steel Cutter (pack of 2) £9.28 £11.13 526-144 No.144 High Speed Steel Cutter (pack of 2) £9.28 £11.13 526-192 No.192 High Speed Steel Cutter (pack of 2) £7.75 £9.30 526-193 No.193 High Speed Steel Cutter (pack of 2) £6.81 £8.17 526-194 No.194 High Speed Steel Cutter (pack of 2) £5.88 £7.05 526-196 No.196 High Speed Steel Cutter (pack of 2) £6.84 £8.20 526-199 No.199 High Speed Steel Cutter (pack of 2) £14.36 £17.23

105 106 107 108 110 111 113 TUNGSTEN CARBIDE CUTTERS Carbide cutters outlast HSS Cutters many times over. 3.2mm (1/8") shanks with 527-105 No.105 Engraving Cutter (pack of 3) £4.89 £5.86 maximum cutting head of 3.2mm (1/8"). Do not run in excess of 30,000 rpm. 527-106 No.106 Engraving Cutter (pack of 3) £5.13 £6.15 527-107 No.107 Engraving Cutter (pack of 3) £5.13 £6.15 527-108 No.108 Engraving Cutter (pack of 3) £5.13 £6.15 527-110 No.110 Engraving Cutter (pack of 3) £6.55 £7.86 527-111 No.111 Engraving Cutter (pack of 3) £6.87 £8.24 527-113 No.113 Engraving Cutter (pack of 3) £6.55 £7.86

HI-DI DIAMOND BURS For glass engraving and other uses. All patterns made of high quality diamond crystal, bonded to a stainless shank by means of a tough nickel; shanks made to International 9901 9903 9905 9910 9911 standards to ensure true running. Shank size of No.559 is 1.6mm (1/16"); all others are 2.4mm (3/32"). 526-901 No.9901 Tungsten Carbide Cutter £8.96 £10.75 526-903 No.9903 Tungsten Carbide Cutter £8.42 £10.10 526-903 No.9905 Tungsten Carbide Cutter £7.64 £9.16 526-910 No.9910 Tungsten Carbide Cutter £9.06 £10.87 526-911 No.9911 Tungsten Carbide Cutter £8.84 £10.60

STRUCTURED TOOTH TUNGSTEN CARBIDE CUTTERS Fast cutting needle-sharp teeth for greater material removal. Use on glass fibre, wood, plastic, epoxy, rubber, laminates, particle board, soft metals, ceramic tile. 3.2mm (1/8") shanks 559 1 1b 6 7 16 101 102 103 104 105 106 529-050 No.559 Hi-Di Diamond Bur £2.58 £3.09 529-055 No 1 Hi-Di Diamond Bur £3.35 £4.02 529-060 No 1b Hi-Di Diamond Bur £3.38 £4.05 529-065 No.6 Hi-Di Diamond Bur £3.35 £4.02 529-070 No 7 Hi-Di Diamond Bur £5.98 £7.17 529-075 No.16 Hi-Di Diamond Bur £12.29 £14.74 529-101 No.101 Hi-Di Diamond Bur £3.40 £4.08 529-102 No.102 Hi-Di Diamond Bur £3.40 £4.08 529-103 No.103 Hi-Di Diamond Bur £3.40 £4.08 529-104 No.104 Hi-Di Diamond Bur £3.40 £4.08 528-520 No.9931 Structured Tooth T C Cutter £16.49 £19.78 529-105 No.105 Hi-Di Diamond Bur £3.40 £4.08 528-530 No.9934 Structured Tooth T C Cutter £20.35 £24.42 529-106 No.106 Hi-Di Diamond Bur £3.40 £4.08 528-540 No.9936 Structured Tooth T C Cutter £16.05 £19.26 529-110 No.101-106 Hi Di Burs Set of 6 £19.48 £23.37

28 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 28 8/7/2018, 1:36 PM ALUMINIUM OXIDE WHEEL POINTS SANDING CONES: Mounted high quality wheel points, with long abrasive life. 3.2mm (1/8") shanks. A rubber tipped arbor allows quick and secure fit of 80 grit and 150 grit cones. Available Ideal for sharpening, de-burring and general purpose grinding. Do not run in excess of as a set comprising; 1 x Rubber tipped arbor, 5 x 80 grit cones, 5 x 150 grit cones. Refill 30,000 rpm. pack contains 5 x 80 grit and 5 x 150 grit cones.

952 953 997 8153 8215 528-903 Sanding Cones 80/150 + Arbor £13.80 £16.56 527-952 No.952 Aluminium Oxide Wheel Point (pack of 3) £4.61 £5.53 528-904 Sanding Cones 80/150 Refill Pack £9.78 £11.73 527-953 No.953 Aluminium Oxide Wheel Point (pack of 3) £5.13 £6.15 527-997 No.997 Aluminium Oxide Wheel Point (pack of 3) £5.13 £6.15 SANDING DISCS: 527-998 No.8153 Aluminium Oxide Wheel Point (pack of 3) £4.61 £5.53 In three grades, all used with No.402 Mandrel. Available in Coarse, Medium and Fine. 527-999 No.8215 Aluminium Oxide Wheel Point £1.80 £2.16 All 19.5mm (¾”) in diameter.

SILICONE CARBIDE GRINDING POINTS Made specially for grinding on hard steels, ceramics, glass and other hard materials. Do not run over 30,000 rpm. 411 412 413

528-280 No.411 Sanding Discs 19.5mm (¾") Coarse (36) £2.39 £2.86 528-290 No.412 Sanding Discs 19.5mm (¾") Medium (36) £2.39 £2.86 528-300 No.413 Sanding Discs 19.5mm (¾") Fine (36) £2.39 £2.86

SANDING DISCS 120/150 A set of 5 x 120 grit and 5 x 150 grit self adhesive sanding discs + arbor. Refill pack 83322 85422 84922 contains 5 x 120 grit and 5 x 150 grit self adhesive sanding discs. 528-020 No.83322 Silicon Carbide Point (pack of 3) £5.34 £6.40 528-030 No.85422 Silicon Carbide Point £2.10 £2.52 528-050 No.84922 Silicon Carbide Point (pack of 3) £5.61 £6.74

SANDING ACCESSORIES

SANDER BANDS: Ideal for rough shaping wood, and smoothing glass fibre. The No.407 & 430 Drum Sanders hold the sander bands by a simple screw mechanism and rubber drum; Coarse (60 grit) and Fine (120 grit) sander bands available for each sanding drum 528-901 Sanding Disc 120/150 + Arbor £3.18 £3.81 528-902 Sanding Disc 120/150 refill £3.39 £4.06 *3.2mm (1/8") shank, FLAP WHEELS 20mm and 30mm diameter flap wheels, 120 grit (coarse). 3mm shank.

407 408 432 No 407 Drum Sander and Bands

528-220 No.407 Drum Sander 12.7mm (½") * £2.51 £3.01 528-230 No.408 Sander Bands 12.7mm (½") Coarse (6) £2.10 £2.52 528-240 No.432 Sander Bands 12.7mm (½") Fine (6) £2.10 £2.52 528-905 20mm Flap Wheel 120 grit £3.08 £3.69 528-906 30mm Flap Wheel 120 grit £3.08 £3.69

BRUSHES Each type of brush is available in the three shapes - Round, Pencil and Cup. Do not run in excess of 15,000 rpm.

430 431 438

No. 430 Drum Sander and Bands

528-242 No.430 Drum Sander 6.4mm (¼")* £5.13 £6.15 Round Cup Pencil 528-244 No.431 Sander Bands 6.4mm (¼) Coarse (6) £1.90 £2.28 WIRE: Small, versatile steel wire brushes for efficient removal of rust and corrosion, 528-246 No.438 Sander Bands 6.4mm (¼") Fine (6) £1.90 £2.28 and polishing metal surfaces. 2.4mm (3/32") shanks.

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 29

catalogue2018a.p65 29 8/7/2018, 1:45 PM 528-100 No.428 Wire Brush - Round 2pk £5.90 £7.08 FELT POLISHING WHEELS 528-110 No.443 Wire Brush - Pencil (pack of 3) £6.81 £8.17 Use Mandrel 401. 528-120 No.442 Wire Brush - Cup £6.35 £7.62 No.414 -12.7mm (1/2") diameter round wheel. No.429 - 25.4mm (1”) diameter round wheel.

414 429

Round Cup Pencil 528-380 No.414 Felt Polishing Wheel 12.7mm (½") £1.71 £2.05 BRISTLE: For general cleaning and polishing. 3.2mm (1/8") shanks. 528-390 No.429 Felt Polishing Wheel 25.4mm (1") £3.07 £3.68

528-160 No.403 Bristle Brush - Round £3.91 £4.69 528-170 No.405 Bristle Brush - Pencil (pack of 3) £4.39 £5.26 CUT-OFF WHEELS 528-180 No.404 Bristle Brush - Cup £3.91 £4.69 Use to cut off, groove and trim metals, woods and ceramics; trim castings and moulded ceramics; cut screws and rusted bolts; slot screw heads. Use Mandrel 402. WIRE BRUSH + ARBOR: Replaceable round wire brush + Mandrel for efficient removal of rust and corrosion, and polishing metal surfaces. No.409 - 24mm diameter x 0.64mm thick HD Emery No.420 - 24mm diameter x 1mm thick HD Emery No.426 - 32mm diameter x 1mm thick glass fibre reinforced

409 420 426

528-502 No.409 Cut-off Wheels 0.64mm x 24mm (36) £8.04 £9.64 528-907 Wire Brush - Round (set of 5) £7.70 £9.24 528-504 No.420 Cut-off Wheels 1mm x 24mm (20) £8.04 £9.64 528-506 No.426 Cut-off Wheels 1mm x 32mm (5) £10.56 £12.67

MANDRELS No.401 for polishing accessories, No.402 for cutting and polishing wheels and sanding SHAPING WHEELS discs. 3.2mm (1/8") shanks. Versatile wheels for cutting and shaping complex curves and profiles. 3.2mm Shank

Cutting/ Mushroom Shaping Wheel wheel 401 402

528-250 No.401 Mandrel (pack of 3) £1.82 £2.18 528-509 Mushroom Shaping Wheel 31mm (1¼") diameter £25.53 £30.63 528-260 No.402 Mandrel (pack of 4) £4.89 £5.86 528-514 Combination Cutting/Shaping Wheel 31mm (1¼") £25.87 £31.04

POLISHING ACCESSORIES CARBIDE BURS Used for contouring, shaping, sanding and surfacing wood, composites and a variety NO.421 POLISHING COMPOUND of other materials. All 80 grit and 3.2mm Shank Apply to buffing wheels (cotton or felt) for bringing a lustre to metals and plastics.

528-350 No.421 Polishing Compound £2.00 £2.40 Sphere Drum Conical Straight COTTON POLISHING MOP 22MM For polishing all metals and plastics. pack of 2. 2.35mm shank. 528-510 Carbide Sphere Bur 9.53mm (3/8") diameter £20.93 £25.11 528-511 Carbide Sanding Drum 12.7mm (1/2") diameter £23.05 £27.66 528-512 Conical Tip Bur 6.35mm (1/4") diameter £20.93 £25.11 528-513 Carbide Straight Bur 3.17mm (1/8") diameter £18.91 £21.97

528-360 Cotton Polishing Mop 22mm (pack of 2) £5.06 £6.07

30 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 30 8/7/2018, 2:29 PM STUDIO EQ UIPMENT & ARMATURES

SCULPTORS’ HEAVY BENCH CARVING ST ANDS & BENCHES Heavy duty Sculptors’ Bench. Suitable for many studio and educational applications. Size: 80cm high x 120cm x 60cm (31½" high x 47" x 23½"). Quality wooden Studio Furniture. Strong, sturdy bolted construction with frames of seasoned beech. For heavy duty carving, modelling and studio use.

(all measurements nominal)

FIXED BANKER Principally for stonecarving; also used for woodcarving and modelling of heavy objects. The top is made of 25mm (1") exterior grade plywood. Size: 78cm high x 57cm square (30½" x 22½").

990-174 Heavy Bench 80cm high x 120cm x 60cm £494.19 £593.03

BANKER TURNTABLES Principally for heavy stone and marble carving; also useful for woodcarving and modelling of heavy objects. Made of 25mm (1") exterior grade plywood. The turning gear is made with metal tracks, centre pin and bush, and heavy rollers fitted on the floating spider casting. It will carry almost any reasonable weight. The banker can be banked up (e.g. using railway sleepers) to the height required, or simply used on the ground. In three standard sizes:

990-170 Fixed Banker 78cm high x 57cm square £364.11 £436.93

CARVING STAND Principally for stone carving; also used for woodcarving and modelling of heavy objects. The top and turntable are made from 25mm (1") exterior grade plywood. The turning gear is the same as the Banker Turntables: with metal tracks, hollow centre pivot and bush, and heavy rollers fitted on the floating spider casting. The hollow pivot and bush allows a bench screw to go through for fixing into the base of a large block of wood when woodcarving. The stand will carry almost any reasonable weight. 990-181 Banker Turntable 45cm Square (18") £299.58 £359.49 Size: 84cm high x 57cm square (33" x 22½"). 990-183 Banker Turntable 57cm Square (22½") £347.00 £416.40 990-185 Banker Turntable 91cm Square (36") £553.55 £664.26

LOW STAND / THRONE Models throne, with revolving top using the same turning gear as the Banker Turntables: with steel tracks, hollow centre pivot and bush, and heavy rollers fitted on the floating spider casting. It will carry almost any reasonable weight.

• This new type Throne may also be used for Stonecarving. • Useful for classes with life models; easily revolves to allow differing views from a fixed position.

Thrones are made 38cm high x 91cm square (15" x 36").

990-192 Low Stand / Throne 38cm high x 91cm square £695.40 £834.48 990-171 Carving Stand 84cm high x 57cm square £580.45 £696.54

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 31

catalogue2018d.p65 31 8/8/2018, 4:56 PM MODELLING ST ANDS

A series of metal modelling stands which give good service in most climates. The tops will revolve at all heights and lock firmly at will. The metal floor models fold up for easy storage. There is also a robust fixed leg economy wooden modelling stand. WOODEN MODELLING STAND TABLE STAND Tripod wooden modelling stand, with simple height adjustment from approximately Light and portable. Can be used on the bench or table; useful for overflow classes. Ideal 100cm (39") to 130cm (51"). The top is approximately 33.5cm (13") square in plywood for maquettes, busts, etc. Made with a sturdy aluminium base. Fitted with a 30.5cm 20mm (¾") thick. Comes flat-packed for self-assembly. (12") square top made from 25mm (1") exterior grade plywood. There is a small height adjustment and the top may be locked with the handwheel or left free turning.

990-201 Table Stand £90.35 £108.42

SKETCH STAND A light, yet stable modelling stand, made with strong tubular aluminium legs. The stand weighs approximately 7kg, folds up when not in use, and so is extremely portable. The shaft is drilled at regular intervals for the insertion of a locking pin for increased load security. The 30.5cm (12") square top is made from 25mm (1") exterior grade plywood. The top will revolve at all heights and locks firmly at will.

Minimum height approx. 96.5cm (38") Maximum height approx. 128cm (50½") Carrying capacity (centrally loaded) approx. 15kg (30kg with lock pin)

990-197 Wooden Modelling Stand £127.50 £153.00

WHIRLER / TABLE MODELLING STANDS The 20cm (8") round is made form durable and lightweight aluminium, with precision bearings for a smooth and effortless spin.

The 30cm (12") round, cast aluminium top is marked off in rings and will spin freely for banding or modelling. It features a non-slip rubber base

20cm (8") Whirler 30cm (12") Whirler

990-199 Whirler / Table Modelling Stand 20cm (8") dia. £27.65 £33.18 990-200 Whirler / Table Modelling Stand 30cm (12") dia. £35.78 £42.93 990-205 Sketch Stand £314.22 £377.06

32 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 32 8/7/2018, 2:34 PM STUDENT STANDS The most popular models for the artist’s studio and for school use. There are two models; both can be folded for transport or storage: STUDENT STAND - TILTING TOP / LOCKING BALL FEET STUDENT STAND - FIXED TOP / SKID FEET Heavy duty and versatile modelling stand. Has the facility to be easily moved Our most popular heavy duty modelling stand, used extensively in artists’ studios and sideways without lifting. Manufactured with strong tubular aluminium legs, which can educational establishments. This has the same legs, body, shaft and wooden top as be folded for storage, but locked open when the stand is in use. The ball feet are made above, but does not have the tilting facility or ball feet. The top rotates independently of of steel and mounted in gun metal castings and can be locked. Fitted with a 35.5cm the shaft, and can be locked. (14") top made from 25mm (1") exterior grade plywood. This is mounted on a pair of aluminium quadrant castings, which enables the top to be tilted and locked at a 45º Minimum height 100cm (39½") angle for low relief work. The top also locks in a vertical position for storage and Maximum height 120cm (47¼") transport. The height is adjusted with the heavy duty screw shaft and lock nut. Carrying capacity (centrally) 100 kg

Minimum height 104 cm (41") Maximum height 124 cm (48¾") Carrying Capacity (centrally) 100 kg

990-207 Student Stand - Fixed Top / Skid Feet £393.28 £471.93

990-206 Student Stand - Tilting Top / Ball Feet £483.88 £580.65

LOWER HEIGHT STANDS Both the Sketch Stand and the Student Stands can be made to a lower height (we make the legs 30cm [12"] shorter). This means that the stands can be used sitting down. Lower height stands are made to special order, and are not a stock item. There is no extra charge for the shorter stand.

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 33

catalogue2018a.p65 33 8/7/2018, 2:35 PM MILLS ARMATURE HOLDER ARMATURES Tubular armature holder mounted on its own feet; designed by John Mills. There is a hole partway down to take a 9.5 mm (3/8") bar if required for shoulders. The armature Armature supports are essential for clay and some wax modelling. We can supply a is simple to use and very portable. 23cm (9") high. range of bust pegs, figure (back) irons, sliding armatures and various types of armature wire including square aluminium wire, for you to make up your own armatures to suit the job in hand.

FIXED IRON ARMATURES Also known as Figure or Back Irons. The height is to the cross bar. 990-218 Mills Armature Holder £27.52 £33.02

SQUARE ALUMINIUM WIRE Square Aluminium Armature Wire; an armature is a support on which soft modelling materials can be modelled without worries about it collapsing. This wire is specially made for Tiranti’s in four sizes, 3.17mm (1/8"), 4.76mm (3/16"), 6.35mm (1/4"), 3/8" Fixed Iron Armature (9.5mm): If you order by weight, we will supply as near as possible to the weight you request, and charge for the exact weight supplied; if you order by length we will supply as near as possible to that length, which will be weighed and charged for accordingly.

A guide to how much wire you get per kg is: 3.17mm (1/8") sq. - approx. 37m (121') per kg 4.76mm (3/16") sq. - approx. 16m (53') per kg 6.35mm (1/4") sq. - approx. 9.5m (31') per kg 990-220 Fixed Iron Armature Support 15cm (6") £9.65 £11.58 9.53mm (3/8") sq. - approx. 4m (13½') per kg 990-221 Fixed Iron Armature Support 23cm (9") £11.79 £14.14 990-222 Fixed Iron Armature Support 30cm (12") £11.93 £14.31 990-223 Fixed Iron Armature Support 38cm (15") £16.09 £19.30

100-001 Sq. Aluminium Wire 3.17mm (1/8") per kg £12.82 £15.38 SLIDING ARMATURES 5 kg + less 10% discount £11.54 £13.84 Adjustable armature support for animals, figures etc. It is possible to vary the angle of 100-002 Sq. Aluminium Wire 4.76mm (3/16") per kg £12.82 £15.38 the upright arms in any direction (to follow the slant of the figure etc), and vary the height 5 kg + less 10% discount £11.54 £13.84 or depth of the cross arm. The arm can be detached when casting. The feet have screw 100-003 Sq. Aluminium Wire 6.35mm (1/4") per kg £13.13 £15.75 holes for fastening the iron to a modelling or base board. The three larger sizes have the 5 kg + less 10% discount £11.81 £14.18 knuckle joint fitted with two cap screws, and are supplied with an Allen Key. The 100-008 Sq. Aluminium Wire 9.53mm (3/8") per kg £12.74 £15.28 122cm (48") knuckle has four cap screws; this size is normally made to special order. 5 kg + less 10% discount £11.47 £13.76

ROUND ALUMINIUM WIRE A round armature wire used to support soft modelling materials and as sculptural material in its own right. Available in two sizes.

A guide to how much wire you get per kg is: 3.17mm (1/8") sq. - approx. 50m (150') per kg 4.76mm (3/16") sq. - approx. 20m (60') per kg Life Size 100-005 Round Aluminium Wire 3.17mm (1/8") per kg £11.22 £13.46 Sliding Armature Support 5 kg + less 10% discount £10.08 £12.10 100-006 Round Aluminium Wire 4.76mm (3/16") per kg £11.22 £13.46 5 kg + less 10% discount £10.08 £12.10 Third Life Size Sliding Armature Support GALVANISED WIRE Used for binding or as armature wire. Sold in coils of approximately 500g.

100-011 Galvanised Wire 14G (2.00mm) 500g coil £6.21 £7.45 100-012 Galvanised Wire 16G (1.60mm) 500g coil £6.29 £7.54 100-013 Galvanised Wire 18G (1.25mm) 500g coil £7.14 £8.56 100-014 Galvanised Wire 20G (0.90mm) 500g coil £7.50 £9.00

NICHROME WIRE A heat resistant wire used as an armature support for clay and for hanging small decorative items (beads, buttons etc) when fired in a kiln, resistant up to 1300ºC. 1.8mm diamter and sup- Sliding Armature and examples of uses plied in 1 metre and 5 metre coils

990-230 Sliding Armature Support (sketch) 20cm (8") £15.89 £19.06 990-231 Sliding Armature Support (third life) 38cm (15") £31.84 £38.20 990-232 Sliding Armature Support (half life) 61cm (24") £96.56 £115.87 806-492 Nichrome Wire (1.8mm) x 1m £3.14 £3.76 990-234 Sliding Armature Support (life size) 122cm (48") £310.36 £372.43 806-493 Nichrome Wire (1.8mm) x 5mt £11.22 £13.46

34 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 34 8/7/2018, 2:43 PM COPPER WIRE PEDESTAL BASES Soft copper wire. Can be used as armature for lost wax Four pedestal bases for the mounting and presentation of work, manufactured in laminated casting, and many other uses. In 100g reels (approximate wood and MDF with a dark mahogany lacquer finish. length shown in metres).

102-010 Copper Wire 14G (2.00mm) - 3.58 metres £4.59 £5.50 102-020 Copper Wire 16G (1.60mm) - 5.59 metres £4.59 £5.50 102-030 Copper Wire 20G (0.90mm) - 17.6 metres £4.59 £5.50 102-040 Copper Wire 25G (0.50mm) - 57.3 metres £4.59 £5.50

ALUMINIUM FINE EXPANDED MESH Ideal for use with a whole range of materials, including Newplast, modelling waxes, clay, plaster, resin, etc. It will probably be found useful for a whole host of other jobs. Sold by the linear foot (30.5cm) 2 ft (61cm) wide or in complete rolls of 10m.

100-035 Pedestal Base 8½" x 6½" approx. £9.61 £11.56 100-036 Pedestal Base 7" x 7" x 1" approx. £10.81 £12.97 100-037 Pedestal Base 6" round approx. £9.92 £11.90 100-026 Expanded Ali Mesh 61cm x 30.5cm (2' x 1') £3.09 £3.70 100-038 Pedestal Base 5½" sq. x 2½" high approx. £17.16 £20.59 100-029 Expanded Ali Mesh 61cm x 10m £32.59 £39.10 CALIPERS BOLTED BUST PEGS The wooden bust peg features a new cross dowel design, which can be securely ALUMINIUM CALIPERS bolted through a battened modelling board. The peg rests on a metal plate which Very strong and durable lightweight calipers. The unique screw action allows easy prevents it turning on the board, and has a large washer and nut to go under the adjustment continuously at any firm pressure of the wing nut. In three sizes. modelling board. Once the nut is securely tightened, the peg is immovable. Made in three sizes:

990-037 Aluminium Calipers 20cm (8") £27.62 £33.14 990-038 Aluminium Calipers 30cm (12") £34.30 £41.16 bust pegs, and example of a bust peg bolted to a modelling board. The new design 990-039 Aluminium Calipers 53cm (21") £51.82 £62.18 allows for more secure attachment of armature wire and the ability to trim to a custom height.

990-210 Bolted Bust Peg 20cm (8") (small heads) £10.24 £12.28 WOODEN CALIPERS 990-211 Bolted Bust Peg 30cm (12") (life size heads) £10.50 £12.60 990-212 Bolted Bust Peg 45cm (18") (bust) £11.24 £13.48

MODELLING BOARDS Exterior grade ply Modelling Boards; all battened and with a centre hole for mounting the bust pegs. Size 30cm (12") is suitable for use with the Table 808-208 Wooden Calipers 25cm (10") £8.67 £10.40 or Sketch Modelling Stands. 808-210 Wooden Calipers 30cm (12") £9.44 £11.32

990-164 Modelling Board 30cm (12") £14.30 £17.16 990-165 Modelling Board 35cm (14") £19.71 £23.65 STEEL / LIGHT ALUMINIUM CALIPERS 990-166 Modelling Board 40cm (16") £21.51 £25.81 An 8" caliper made in Steel and basic 12" Aluminium caliper for light or occasional use.

HOSE / JUBILEE CLIPS For fixing armature wire to bust pegs; two are recommended per bust peg for stability. Small Clip for 20cm (8"), Large Clip for 30cm (12") & 46cm (18").

104-006 Steel Calipers 20cm (8") £6.43 £7.71 104-003 Aluminium Calipers (BASIC) 30cm (12") £5.13 £6.15

100-020 Hose / Jubilee Clip Small £0.70 £0.84 10 + less 10% discount £0.63 £0.76 100-021 Hose / Jubilee Clip Large £1.15 £1.38 10 + less 10% discount £1.04 £1.24

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 35

catalogue2018a.p65 35 8/7/2018, 2:50 PM CERAMICS EQUIPMENT & GLAZES

POTTERYYEQ EQUIPMENT

POTTERS' WHEELS SHIMPO RK3E POTTERS' WHEEL This wheel offers adjustable height (5 settings) from floor to table top operation making G30 POTTERS' WHEEL this a versatile piece of equipment; with quiet running (30dba) and able to run clock- This wheel's wooden cabinet is sturdily built. It is constructed with birch-faced blockboard wise/anti-clockwise. The wheel is free turning at 0 rpm substituting as a banding wheel. side and top with solid hardwood legs and fitted with a large rigid fibreglass splash tray. Featuring a two-piece splashpan and detachable remote foot control. The 35.5cm (14") A superb drive with high torque and an extremely smooth and sensitive speed control wheelhead can centre 45kg (100lb). that can be reversed at the flick of a switch. The roller bearings are sealed for life. .37kW (1/2 Hp motor), variable electronic speed controller 0-250 rpm, 240v 13amp .55kW (3/4Hp motor), variable electronic speed controller 0-300 rpm, 240v 13amp 35.5cm wheelhead, centre load weight 45kg. 305mm aluminium wheelhead, centre load weight 30kg. Dimensions approx. 584/685/558mm. Width: 760mm, length: 1170mm, height: 850mm, weight: 74kg

307-242 Shimpo RK3E Potters' Wheel £1,325.49 £1,590.58

807-245 G30 Potters' Wheel £2,182.80 £2,619.36

SHIMPO RK3D POTTERS' WHEEL G29 POTTERS' WHEEL This is robust wheel with a steel body. With quiet running (30dba) and able to run Built to a high standard, this wheel is one of the quietest on the market. It incorporates clockwise/anti-clockwise. Featuring a two piece splashpan and foot/hand control. The a sophisticated control system providing excellent response to the wheel. Controlled wheel is free turning at 0 rpm substituting as a banding wheel. The 30cm (12") by the foot peddle it will also maintain pre-set speeds. Built on a sturdy steel chassis, wheelhead can centre 45kg (100lb). the roller bearings are sealed for life. Surrounding the chassis frame is a fibreglass case fitted with a tough polypropylene tray. .37kW (1/2 Hp motor), variable electronic speed controller 0-250 rpm, 240v 13amp 35.5cm wheelhead, centre load weight 45kg. .37kW (1/2 Hp motor), variable electronic speed controller 0-280 rpm, 240v 13amp Dimensions approx. 508/533/510mm. 30cm aluminium wheelhead, centre load weight 20kg. Width: 530mm, length: 1060mm, height: 685mm, weight: 46kg

807-240 G29 Potters' Wheel £2,029.80 £2,435.76

307-247 Shimpo RK3D Potters' Wheel £1,173.00 £1,407.60

36 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 36 8/7/2018, 3:00 PM PUGMILLS MANUAL EXTRUDERS

This range of pugmills is built to a very high standard, with aluminium bodies, which detach for easy cleaning, and non-corrosive blades. Safety is a key factor in designing G64 WALL MOUNTED EXTRUDER this equipment. All these pugmills are fitted with thermal overload starters and safety An indispensable tool for the studio or classroom. The primary use is for extruding small limit switches. Key operated lockout switches can be supplied as an option if required. solid sections e.g. cup handles or coils, but can be used to extrude hollow sections with Under no circumstances should they be used with dry clay still in the body additional dies. The handle can be removed for safe storage when not in use .The barrel is 75mm diameter alloy with quick release clips for facilitating the changing of the G49E PUGMILL dies. Supplied with a set of standard dies as shown Specifically designed for the studio and classroom environment. This machine is compact and lightweight making it easy to transport. Fitted with an interlocked hopper safety switch, this negates the need for a safety grid making it extremely easy to load. 100mm aluminium vertically separating body, dispensing 50mm extrusion, supplied with Nylatron blades. Output: 190-200kg per hour. Height: 470mm, width: 280mm, length: 800mm, weight: 36.5kg

807-200 G64 Wall Mounted Extruder £240.72 £288.86 807-190 Blank Aluminium Die for G64 £7.34 £8.80 807-100 G49E Pugmill £1,504.50 £1,805.40 HOLLOW DIE PLATES FOR G64 G50E PUGMILL A larger version of the G49E. Fitted with an interlocked hopper safety switch, this negates the need for a safety grid making it extremely easy to load. 150mm aluminium vertically separating body, dispensing 75mm extrusion, supplied with alloy blades. Output: 360kg per hour. Height: 500mm, width: 280mm, length: 800mm, weight: 78kg

807-202 Hollow Die Round £30.60 £36.72 807-204 Hollow Die Hexagonal £30.60 £36.72 807-206 Hollow Die Square £30.60 £36.72 807-208 Hollow Die Set of 3 £89.76 £107.71

CLAY ROLLERS

These clay rollers are designed to provide an extremely efficient and reliable method of producing slabs of clay for hand building or tiles etc. With a rack and pinion drive and a threaded height adjuster ensuring a fine and accurate slab. The legs are able to be folded for ease of storage, and it is supplied with a set of high quality rolling cloths. 807-105 G50E Pugmill £2,019.60 £2.423.52

G53 VERTICAL PUGMILL The G53 Vertical pugmill offers superior performance over conventional horizontal pugmills and has the advantage of having a 60x60cm footprint. It will require securing to a suitable floor. Fitted with an interlocked hopper safety switch, this negates the need for a safety grid making it extremely easy to load. 150mm aluminium vertically separating body, dispensing 75mm extrusion, supplied with alloy blades. Output: 360kg per hour. height: 1980mm, width: 609mm, depth: 711mm, weight: 128kg.

807-300 G601 Clay Roller 91.5cm (3') £1,045.50 £1,254.60 807-302 G602 Clay Roller 122cm (4') £1,096.50 £1,315.80 807-110 G53 Vertical Pugmill £3,162.00 £3,794.40 807-304 Extra Cloths Set for Clay Roller £76.50 £91.80

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 37

catalogue2018d.p65 37 8/8/2018, 4:58 PM SPRAYBOOTHS G165 SPRAYBOOTH

These spraybooths are designed to meet Height: 1655mm, width: 720mm, depth: 1290mm. Extraction: 250CuFt/min. Water ever increasing environmental tank: polypropylene. Internal parts: stainless steel. Internal dimensions of hood: 638mm standards. A continuous curtain of re- x 625mm x 420mm deep. Working depth: 350mm. Weight dry: 118kg circulating water is sprayed down the rear face of the booth. The glaze spray 807-230 G165 Spraybooth £3,901.50 £4,681.80 is aimed at the curtain of water and is encouraged by a powerful extraction G166 SPRAYBOOTH fan. The excess glaze is trapped by the water curtain and washed into the Height: 1680mm, width: 1200mm, depth: 1585mm. Extraction 250CuFt/min. Water sump tank, from where it can be tank: polypropylene. Internal parts: stainless steel. Internal dimensions of hood: 1000mm removed. Glaze may be reclaimed, x 1000mm x 585mm deep. Working depth: 500mm. Weight dry: 180kg depending on the type. These booths are primarily designed to be used by 807-232 G166 Spraybooth £7,344.00 £8,812.80 the studio potter or educational faculties for low volume production. They do not OPTIONAL LIGHT FOR SPRAYBOOTHS require ducting to atmosphere, are Please order at time of ordering Spraybooth. (Not available separately.) mounted on castors and have removable washable filters, making 807-234 Spraybooth Light Option £204.00 £244.80 them convenient apparatus for spraying glazes. The noise output levels for these booths is 85 to 90 dba. Hearing protection should be used.

NABERTHERM KILNS We now supply a comprehensive range of Nabertherm Kilns & Accessories including TOP LOADING KILNS top loaders and front loaders up to 600 ltr capacity, assembled by hand and supplied Perfect kiln for studio and workshop with features including; housing made from textured direct from the Nabertherm Factory in germany. stainless steel, multiple layers of insulation for low exterior temperatures, adjustable lid mechanism with gas damper support, lockable castors for easy movement around B400 CONTROLLER studio/workshop. Available in both 1 phase 230v and 3 phase 400v versions. Fitted as standard with all Nabertherm arts & crafts kilns they offer intuitive operation and contemporary design. Operated via a central control dial (jog wheel) and with CHAMBER KILNS (HEATED FROM 3 SIDES) temperatures and program information presented in a clear, hi contrast display. In With Elements located in the sides and floor. Positioned at an ergonomic height these developing the B400 to replace the previous B130 controller ease of use was the focus chamber kilns are an economical solution for larger studios/workshops, schools, , for convenience the controller may be taken off the holder on the kiln for handheld colleges and other institutions. Featuring dual shell housing to keep exterior temperatures operation and all programs entered in plain text. to a minimum, dual shell door with safety cut-out switch and door mounted controller Nabertherm controllers now feature a USB interface to document for later review. which is removeable for comfortable operation.

KEY FEATURES CHAMBER KILNS (HEATED FROM 5 SIDES) - 5 programs can be stored (each with up to 4 segments) Professional level kiln that uses the same dual shell construction and many features of - 2 bisque and 3 glaze firings are preset defaults. the 3 sided chamber kilns. Heating elements are located on all three fixed sides, the - Skip button for segment jump floor and door. With a proven record firing porcelain, ceramics and glass fusing these - Adjustable start time and real time clock kilns are capable for frequent firings and offers excellent temperature uniformity. - Data input via jog dial and buttons - Status messages in clear text - kWh meter - NTlog basic for Nabertherm controller: recording of process data with usb flash drive.

Top 60 Model N280E Model Top 140 Model N100 Model 808-214 Nabertherm TOP60/eco 60ltr 3.6kw 15.6amps 1 phase 230v Internal dimensions: ø410mm x 460mm(h) £POA £POA 808-216 Nabertherm TOP100 100ltr 7.0kw 30.4 amps 1 phase 230v Internal dimensions: ø480mm x 570mm(h) £POA £POA 808-218 Nabertherm TOP140 140ltr 9.0kw 39.1amps 1 phase 230v Internal dimensions: ø550mm x 570mm(h) £POA £POA 808-230 Nabertherm TOP190 190ltr 11.0kw 47.8amps 1 phase 230v Internal dimensions: ø590mm x 690mm(h) £POA £POA 808-232 Nabertherm Chamber N140E 140ltr 9.0kw 13amps 3 phase 400v Internal dimensions: 450mm(w) x 580mm(d) x 570mm(h) £POA £POA 808-234 Nabertherm Chamber N210E 210ltr 11.0kw 47.8amps 1 phase 230v Internal dimensions: 500mm(w) x 580mm(d) x 700mm(h £POA £POA 808-236 Nabertherm Chamber N280E 280ltr 15.0kw 21.7amps 3 phase 400v Internal dimensions: 520mm(w) x 580mm(d) x 890mm(h) £POA £POA 808-238 Nabertherm Chamber N500E 500ltr 30.0kw 3 phase 400v Internal dimensions: 600mm(w) x 820mm(d) x 1000mm(h) £POA £POA 808-240 Nabertherm Chamber (5) N100 100ltr 9.0kw 39.1amps 1 phase 230v Internal dimensions: 400mm(w) x 530mm(d) x 460mm(h) £POA £POA 808-242 Nabertherm Chamber (5) N150 150ltr 11.0kw 27.6amps 1 phase 400v Internal dimensions: 450mm(w) x 530mm(d) x 590mm(h) £POA £POA 808-244 Nabertherm Chamber (5) N200 200ltr 15.0kw 21.7amps 3 phase 400v Internal dimensions: 470mm(w) x 530mm(d) x 780mm(h) £POA £POA 808-246 Nabertherm Chamber (5) N300 300ltr 20.0kw 28.9amps 3 phase 400v Internal dimensions: 550mm(w) x 700mm(d) x 780mm(h) £POA £POA 808-248 Nabertherm Chamber (5) N440 440ltr 30.0kw 43.4amps 3 phase 400v Internal dimensions: 600mm(w) x 750mm(d) x 1000mm(h) £POA £POA 808-250 Nabertherm Chamber (5) N660 660ltr 40.0kw 57.8amps 3 phase 400v Internal dimensions: 600mm(w) x 1100mm(d) x 1000mm(h) £POA £POA

38 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 38 8/7/2018, 3:02 PM L&L KILNS The Fuego is our smallest top loading kiln. With a 40 ltr capacity, it fires up to cone 10 The Robin has the same features as the Feugo, but with a 70 ltr capacity, firing up to (1285ºC). It uses a standard 13amp plug. It is supplied with a three button program cone 02 (1100ºC). It uses a standard 13amp plug. It is supplied with a three button control including four common firing programmes. The programmes stay in memory program control including four common firing programmes. The programmes stay in until changed. Up to eight segments in each programme i.e. 8 x ramp, set point and memory until changed. Up to eight segments in each programme i.e. 8 x ramp, set hold. The elements, as with all our top loading kilns, are in a protective ceramic brick point and hold. The elements, as with all our top loading kilns, are in a protective cavity. It is supplied with a protected thermocouple. Internal dimensions: 33cm diam- ceramic brick cavity. It is supplied with a protected thermocouple. Internal dimensions eter 45.7cm high. We recommend that you allow a 90cm wide x 100cm deep area for 42cm diameter 45.7cm high. We recommend that you allow a 100cm wide x 120cm this kiln to be placed in as it should have at least a 30cm gap around it. deep area for this kiln to be placed in as it should have at least a 30cm gap around it.

806-330 Fuego Top Loading Kiln 40ltr 1 phase £1,385.67 £1,662.80 806-332 Robin Top Loading Kiln 70ltr 1 phase £1,736.04 £2,083.24

Fuego Kiln Robin Kiln

EASY-FIRE PROFESSIONAL GRADE KILNS FOR ARTISTS AND TEACHERS Easy-Fire kilns are available in four sizes, incorporating the "dyna-glow" element holders. Zone control dynamically adjusts the element output to maintain an even temperature throughout the kiln. Supplied with "dynatrol", an easy to use and powerful controller, incorporating six "Easy-Fire" programs along with delay, pre-heat and alarms in a one touch section on the control face. They have shielded thermocouples for greater durability. The temperature rating for this range of kilns is 1290ºC. They can also be supplied with a vacuum extraction system; this is capable of running the extraction for two kilns at a time.

Easy Fire Kiln 70ltr Easy Fire Kiln 125ltr Easy Fire Kiln 190ltr Easy Fire Kiln 190ltr Easy Fire Kiln 290ltr

806-334 Easy-Fire Kiln: 70ltr, 5.86 Kw, 26.6 Amps, 1 phase, internal dimensions: 42cm dia. 45.7cm high £1,758.33 £2,109.99 806-336 Easy-Fire Kiln: 105ltr, 8.79 Kw, 39.9 Amps, 1 phase, internal dimensions: 42cm dia. 68.6cm high £2,340.14 £2,808.16 806-338 Easy-Fire Kiln: 105ltr, 8.79 Kw, 26.6 Amps, 3 phase, internal dimensions: 42cm dia. 68.6cm high £2,340.14 £2,808.16 806-340 Easy-Fire Kiln: 125ltr, 8.66 Kw, 39.4 Amps, 1 phase, internal dimensions: 57cm dia. 45.7cm high £2,392.92 £2,871.50 806-342 Easy-Fire Kiln: 190ltr, 10.56 Kw, 48 Amps, 1 phase, internal dimensions: 57cm dia. 68.6cm high £2,930.15 £3,516.18 806-344 Easy-Fire Kiln: 190ltr, 10.56 Kw, 27.1 Amps, 3 phase, internal dimensions: 57cm dia. 68.6cm high £2,930.15 £3,516.18 806-346 Easy-Fire Kiln: 190ltr, 10.50 Kw, 47.7 Amps, 1 phase, internal dimensions: 71cm dia. 45.7cm high £2,825.76 £3,390.91 806-348 Easy-Fire Kiln: 290ltr, 10.56 Kw, 48 Amps, 1 phase, internal dimensions: 71cm dia. 68.6cm high £3,362.99 £4,035.58 806-350 Easy-Fire Kiln: 290ltr, 15.06 Kw, 39.5 Amps, 3 phase, internal dimensions: 71cm dia. 68.6cm high £3,362.99 £4,035.58

The kilns require simple assembly.

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 39

catalogue2018a.p65 39 8/7/2018, 3:07 PM GLAZES

LOW FIRE GLAZES Low Fire, cone 06/04

(Colours shown are an indication only) 806-230 Low Fire Glaze 450ml Clear (700) £9.08 £10.89 806-294 Low Fire Glaze 450ml Powder Pink (732) £10.75 £12.90 806-232 Low Fire Glaze 450ml Snow White (701) £10.75 £12.90 806-296 Low Fire Glaze 450ml Chrome Green (760) £10.75 £12.90 806-233 Low Fire Glaze 450ml Porcelain White (702) £10.75 £12.90 806-298 Low Fire Glaze 450ml Butter Yellow (734) £10.75 £12.90 806-236 Low Fire Glaze 450ml Light Grey (703) £10.75 £12.90 806-300 Low Fire Glaze 450ml Canary Yellow (735) £10.75 £12.90 806-238 Low Fire Glaze 450ml Charcoal (704) £10.75 £12.90 806-302 Low Fire Glaze 450ml Purple (736) £15.77 £18.92 806-240 Low Fire Glaze 450ml Black (705) £10.75 £12.90 806-308 Low Fire Glaze 450ml Grass Green (761) £10.75 £12.90 806-242 Low Fire Glaze 450ml Royal Blue (706) £10.75 £12.90 806-310 Low Fire Glaze 450ml Raspberry (740) £10.75 £12.90 806-244 Low Fire Glaze 450ml Azure (707) £10.75 £12.90 806-312 Low Fire Glaze 450ml Burgundy (741) £10.75 £12.90 806-246 Low Fire Glaze 450ml Baby Blue (708) £10.75 £12.90 806-314 Low Fire Glaze 450ml Dark Red (742) £10.75 £12.90 806-248 Low Fire Glaze 450ml Powder Blue (709) £10.75 £12.90 806-316 Low Fire Glaze 450ml Bright Red (743) £10.75 £12.90 806-250 Low Fire Glaze 450ml Wedgewood (710) £10.75 £12.90 806-318 Low Fire Glaze 450ml Bright Orange (744) £10.75 £12.90 806-252 Low Fire Glaze 450ml Navy Blue (711) £10.75 £12.90 806-320 Low Fire Glaze 450ml Bright Green (745) £10.75 £12.90 806-254 Low Fire Glaze 450ml Teal Blue (712) £10.75 £12.90 806-326 Low Fire Glaze 450ml Fire Engine Red (748) £14.93 £17.91 806-256 Low Fire Glaze 450ml Hunter Green (713) £10.75 £12.90 806-328 Low Fire Glaze 450ml Christmas Red (749) £14.93 £17.91 806-258 Low Fire Glaze 450ml Sea Spray (714) £10.75 £12.90 806-360 Low Fire Glaze 450ml Neon Orange (750) £14.93 £17.91 806-260 Low Fire Glaze 450ml Mint (715) £10.75 £12.90 806-362 Low Fire Glaze 450ml Hot Pink (751) £14.93 £17.91 806-262 Low Fire Glaze 450ml Jade (716) £10.75 £12.90 806-364 Low Fire Glaze 450ml Dove Grey (762) £10.75 £12.90 806-264 Low Fire Glaze 450ml Forest Green (717) £10.75 £12.90 806-366 Low Fire Glaze 450ml Black Velvet (763) £10.75 £12.90 806-266 Low Fire Glaze 450ml Mahogany (718) £10.75 £12.90 806-368 Low Fire Glaze 450ml Satin Clear (250) £12.42 £14.90 806-268 Low Fire Glaze 450ml Violet (752) £14.93 £17.91 806-370 Low Fire Glaze 450ml Satin White (251) £12.42 £14.90 806-270 Low Fire Glaze 450ml Bright Yellow (753) £10.75 £12.90 806-380 Low fire Glaze 450ml Satin Taupe (254) £14.10 £16.92 806-272 Low Fire Glaze 450ml Desert Sand (721) £10.75 £12.90 806-382 Low Fire Glaze 450ml Satin Quebec Blue (263) £14.10 £16.92 806-274 Low Fire Glaze 450ml Marmalade (754) £10.75 £12.90 806-218 Low Stone Glaze 450ml Ice Berg (902) £14.10 £16.92 806-276 Low Fire Glaze 450ml Chocolate Brown (723) £10.75 £12.90 806-220 Low Stone Glaze 450ml Wheatfield (905) £14.10 £16.92 806-278 Low Fire Glaze 450ml Really Red (755) £10.75 £12.90 806-222 Low Stone Glaze 450ml Autumn Leaves (907) £14.10 £16.92 806-280 Low Fire Glaze 450ml Hot Saffron (756) £10.75 £12.90 806-224 Low Stone Glaze 450ml Old Copper (913) £15.77 £18.92 806-282 Low Fire Glaze 450ml Ivory (726) £10.75 £12.90 806-226 Low stone Glaze 450ml Iron Earth (921) £15.77 £18.92 806-284 Low Fire Glaze 450ml Flesh (727) £10.75 £12.90 806-210 Low Fire Glaze 450ml Clear Crackle £12.42 £14.62 806-286 Low Fire Glaze 450ml Mulberry (757) £10.75 £12.90 806-288 Low Fire Glaze 450ml Speckled Grey (759) £10.75 £12.90 806-290 Low Fire Glaze 450ml Deep Pink (730) £10.75 £12.90

40 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 40 8/7/2018, 3:18 PM STONEWARE GLAZES

Hi fire, cone 4-6

(Colours shown are an indication only)

805-744 Stoneware Glaze 450ml Text. Oasis (1129) £10.75 £12.90 805-746 Stoneware Glaze 450ml Charcoal (1131) £10.75 £12.90 805-748 Stoneware Glaze 450ml Purple (1132) £14.10 £16.92 805-700 Stoneware Glaze 450ml Transparent (1100) £9.08 £10.89 805-750 Stoneware Glaze 450ml Chocolate Brown (1134) £9.08 £10.89 805-704 Stoneware Glaze 450ml Wedgwood Blue (1102) £9.08 £10.89 805-752 Stoneware Glaze 450ml Navy Blue (1135) £12.42 £14.90 805-706 Stoneware Glaze 450ml Dusty Rose (1103) £10.75 £12.90 805-754 Stoneware Glaze 450ml Royal Blue (1136) £12.42 £14.90 805-707 Stonware Glaze 450ml Grass Green (1104) £10.75 £12.90 805-756 Stoneware Glaze 450ml Teal Blue (1137) £10.75 £12.90 805-708 Stoneware Glaze 450ml Crimson (1106) £10.75 £12.90 805-758 Stoneware Glaze 450ml Lime Green (1138) £10.75 £12.90 805-710 Stoneware Glaze 450ml Black (1107) £9.08 £10.89 805-760 Stoneware Glaze 450ml Text. Kiwi Fruit (1140) £12.42 £14.90 805-712 Stoneware Glaze 450ml Butter Yellow (1108) £9.08 £10.89 805-762 Stoneware Glaze 450ml Text. Cascade (1141) £10.75 £12.90 805-714 Stoneware Glaze 450ml Coral (1109) £9.08 £10.89 805-764 Stoneware Glaze 450ml Text. Wheat (1142) £14.10 £16.92 805-716 Stoneware Glaze 450ml Turquoise (1110) £9.08 £10.89 805-766 Stoneware Glaze 450ml Text. Navy (1143) £14.10 £16.92 805-718 Stoneware Glaze 450ml Holly Green (1111) £10.75 £12.90 805-768 Stoneware Glaze 450ml Text. Mottle (1144) £10.75 £12.90 805-720 Stoneware Glaze 450ml Milk'n'Honey (1113) £12.42 £14.90 805-769 Stoneware Glaze 450ml Text. Autumn (1145) £10.75 £12.90 805-722 Stoneware Glaze 450ml Moonscape (1115) £12.42 £14.90 805-863 Stoneware Glaze 450ml Text. Swampy (1147) £17.44 £20.92 805-724 Stoneware Glaze 450ml Text. Chocolate (1117) £12.42 £14.90 805-865 Stoneware Glaze 450ml Delft Blue (1147) £17.44 £20.92 805-726 Stoneware Glaze 450ml White (1118) £9.08 £10.89 805-770 Stoneware Glaze 450ml Text. Chowder (1148) £14.10 £16.92 805-728 Stoneware Glaze 450ml Satin Clear (1120) £9.08 £10.89 805-771 Stoneware Glaze 450ml Oceanic Blue (1149) £14.10 £16.92 805-730 Stoneware Glaze 450ml Satin White (1121) £10.75 £12.90 805-772 Stoneware Glaze 450ml Fuschia (1151) £14.10 £16.92 805-732 Stoneware Glaze 450ml Satin Mottle (1122) £12.42 £14.90 805-774 Stoneware Glaze 450ml Text. Chrome (1152) £14.10 £16.92 805-734 Stoneware Glaze 450ml Satin Speckle (1123) £10.04 £12.04 805-776 Stoneware Glaze 450ml Text. Cobalt (1153) £15.77 £18.92 805-736 Stoneware Glaze 450ml Satin Wedgwood (1124) £10.75 £12.90 805-778 Stoneware Glaze 450ml Text. Iron (1154) £14.10 £16.92 805-740 Stoneware Glaze 450ml Satin Black (1126) £10.75 £12.90 805-780 Stoneware Glaze 450ml Pebble Stone (1155) £12.42 £14.90 805-742 Stoneware Glaze 450ml Satin Turquoise (1127) £10.75 £12.90 805-782 Stoneware Glaze 450ml Olive Stone (1156) £12.42 £14.90 805-784 Stoneware Glaze 450ml Text. Honey (1157) £14.10 £16.92

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 41

catalogue2018a.p65 41 8/7/2018, 3:27 PM STONEWARE GLAZES (CONTINUED) 805-830 Stoneware Glaze 450ml Text. Jungle (1182) £10.75 £12.90 805-832 Stoneware Glaze 450ml Dark Cloud (1183) £12.42 £14.90 805-786 Stoneware Glaze 450ml Text. Bronze (1158) £14.10 £16.92 805-836 Stoneware Glaze 450ml Forest Green (1185) £12.42 £14.90 805-788 Stoneware Glaze 450ml Green Stone (1159) £12.42 £14.90 805-838 Stoneware Glaze 450ml Soft Pink (1186) £12.42 £14.90 805-790 Stoneware Glaze 450ml Text. Topaz (1161) £14.10 £16.92 805-840 Stoneware Glaze 450ml Clear Crackle (1187) £9.08 £10.89 805-792 Stoneware Glaze 450ml Text. Burgundy (1162) £14.10 £16.92 805-842 Stoneware Glaze 450ml Pewter (1188) £12.42 £14.90 805-794 Stoneware Glaze 450ml Dark Red (1164) £10.75 £12.90 805-848 Stoneware Glaze 450ml Muddy Waters (1191) £15.77 £18.92 805-796 Stoneware Glaze 450ml Bright Red (1165) £10.75 £12.90 805-850 Stoneware Glaze 450ml Reactive Purple (1192) £19.11 £22.93 805-798 Stoneware Glaze 450ml Bright Orange (1166) £10.75 £12.90 805-852 Stoneware Glaze 450ml Fire Engine Red (1193) £12.42 £14.90 805-800 Stoneware Glaze 450ml Bright Green (1167) £10.75 £12.90 805-854 Stoneware Glaze 450ml Christmas Red (1194) £12.42 £14.90 805-802 Stoneware Glaze 450ml Bright Purple (1168) £19.11 £22.93 805-855 Stoneware Glaze 450ml Neon Orange (1195) £12.42 £14.90 805-804 Stoneware Glaze 450ml Dark Purple (1169) £18.28 £21.93 805-856 Stoneware Glaze 450ml Hot Pink (1196) £14.10 £16.92 805-806 Stoneware Glaze 450ml Text. Mulberry (1170) £14.10 £16.92 805-859 Stoneware Glaze 450ml Reactive Red (1197) £15.77 £18.92 805-808 Stoneware Glaze 450ml Text. Plum (1171) £14.10 £16.92 805-845 Stoneware Glaze 450ml Oil Spot (1198) £10.75 £12.90 805-810 Stoneware Glaze 450ml Text. Leopard (1172) £14.10 £16.92 805-861 Stoneware Glaze 450ml Texture Mossy (1199) £10.75 £12.90 805-812 Stoneware Glaze 450ml Text. Hot Chowder (1173) £14.10 £16.92 805-846 Stoneware Glaze 450ml Gold (1112) £14.10 £16.92 805-818 Stoneware Glaze 450ml Cinnamon Ripple (1176) £12.42 £14.90 805-844 Stoneware Glaze 450ml Gold Rain (1114) £14.10 £16.92 805-820 Stoneware Glaze 450ml Antique Mottle (1177) £12.42 £14.90 805-843 Stoneware Glaze 450ml Mirror (1116) £14.10 £16.92 805-826 Stoneware Glaze 450ml Lagoon (1180) £10.75 £12.90 COLOROBBIA LUSTRES Colorobbia Liquid Golds and Lustres have dissovled metals as their essential component. LOW FIRE METALLIC GLAZES They are mainly applied by brushing onto porcelain, glass or ceramic objects and are always applied to ready fired and glazed items. Before firing, the objects must be left to dry for a few hours in a warm, dust-free place.

Recommended firing temperatures are:

Glass; 500ºC-600ºC, orton cone 022-021 Ceramics: 690ºC-700ºC, orton cone 018 Porcelain: 750ºC-815ºC, orton cone 017-015

Ready to use and of gluey, dark brown liquid aspect they should be applied in a layer that is uniform and fine. Too thick a layer can cause burning or clouding. Some golds and copper do not need to be diluted, other lustres can be diluted using lustre thinners at a ratio of 10%. IRIS (mother of pearl) needs to be diluted at 15% or more as it can burn easily when applied too thickly and results in a white powder that does not adhere.

A New range of Low firing Metallic glazes, unlike lustres or overglazes, these regular low-fire glazes will fire in your kiln with any other low fire glaze. These new glazes are Lead free but not dinnnerware safe. Not suitable for functional ware. Use 2-3 heavy coats to achieve best results Copper Lustre Green Lustre 805-320 LF Metallic Glaze: Golden Halo 450ml £16.61 £19.93 805-322 LF Metallic Glaze: Moonlight 450ml £16.61 £19.93 805-324 LF Metallic Glaze: Green Mirror 450ml £16.61 £19.93 805-326 LF Metallic Glaze: Wrought Iron 450ml £16.61 £19.93 805-328 LF Metallic Glaze: Brushed Bronze 450ml £16.61 £19.93 805-330 LF Metallic Glaze: Green Patina 450ml £16.61 £19.93 Iris Lustre Orange Lustre LOW FIRE GLAZE CRYSTALS (mother of pearl)

Blue Lustre Bright Gold (8%) Lustre

Low Fire Glaze Crystals are very versatile and can be fired from cone 06 to 6, they can be used with any glaze in this firing range and mixed together in any combination to create a variety of appearances. The crystals can be dropped or placed onto a final Lustre Thinners coat of glaze or mixed into a liquid glaze to be brushed on. These crystals will run a lot at cones 5-6. 805-340 Colorobbia Copper Lustre 5gm £43.18 £51.81 805-342 Colorobbia IRIS (mop) Lustre 5gm £5.30 £6.36 805-300 LF Glaze Crystals 1oz Cobalt Blue £9.29 £11.14 805-344 Colorobbia Blue Lustre 5gm £12.41 £14.89 805-302 LF Glaze Crystals 1oz White £9.29 £11.14 805-346 Colorobbia Green Lustre 5gm £10.42 £12.50 805-304 LF Glaze Crystals 1oz Yellow £9.29 £11.14 805-348 Colorobbia Orange Lustre 5gm £5.21 £6.25 805-306 LF Glaze Crystals 1oz Green £9.29 £11.14 805-350 Colorobbia Bright Gold (8%) Lustre 5gm £55.04 £66.04 805-308 LF Glaze Crystals 1oz Maroon £9.29 £11.14 805-352 Colorobbia Lustre Thinners 25gm £10.84 £13.00 805-310 LF Glaze Crystals 1oz Reactive Blue £9.29 £11.14 805-312 LF Glaze Crystals 1oz Reactive Green £9.29 £11.14

42 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 42 8/7/2018, 3:39 PM UNDERGLAZES Low fire & high fire, cone 06-6

(Colours shown are an indication only) 805-924 Underglaze 113gm White (501) £6.78 £8.13 805-968 Underglaze 113gm Honey (523) £6.78 £8.13 805-925 Underglaze 450ml White(501) £15.35 £13.01 805-970 Underglaze 113gm Mustard (524) £6.78 £8.13 805-926 Underglaze 113gm Ivory (502) £6.78 £8.13 805-972 Underglaze 113gm Lime Green (525) £6.78 £8.13 805-928 Underglaze 113gm Light Yellow (503) £6.78 £8.13 805-974 Underglaze 113gm Mid Green (526) £6.78 £8.13 805-930 Underglaze 113gm Yellow (504) £6.78 £8.13 805-976 Underglaze 113gm Sherwood Green (527) £6.78 £8.13 805-932 Underglaze 113gm Orange (505) £6.78 £8.13 805-978 Underglaze 113gm Chartreuse (528) £6.78 £8.13 805-934 Underglaze 113gm Bright Yellow (506) £6.78 £8.13 805-980 Underglaze 113gm Dark Olive (529) £6.78 £8.13 805-936 Underglaze 113gm English Rose (507) £6.78 £8.13 805-982 Underglaze 113gm Hunter Green (530) £6.78 £8.13 805-938 Underglaze 113gm Baby Pink (508) £6.78 £8.13 805-984 Underglaze 113gm Prussian Blue (531) £6.78 £8.13 805-940 Underglaze 113gm Flesh (509) £6.78 £8.13 805-986 Underglaze 113gm Sky Blue (532) £6.78 £8.13 805-942 Underglaze 113gm Tan (510) £6.78 £8.13 805-988 Underglaze 113gm Turquoise (533) £6.78 £8.13 805-944 Underglaze 113gm Aztec Brown (511) £6.78 £8.13 805-990 Underglaze 113gm Lavender (534) £6.78 £8.13 805-946 Underglaze 113gm Walnut Brown (512) £6.78 £8.13 805-992 Underglaze 113gm Blue Grey (535) £6.78 £8.13 805-948 Underglaze 113gm Chocolate Brown (513) £6.78 £8.13 805-994 Underglaze 113gm Bright Blue (536) £6.78 £8.13 805-950 Underglaze 113gm French Brown (514) £6.78 £8.13 805-996 Underglaze 113gm Cobalt Blue (537) £6.78 £8.13 805-952 Underglaze 113gm Black (515) £6.78 £8.13 805-998 Underglaze 113gm Blue Velvet (538) £6.78 £8.13 805-953 Underglaze 450ml Black (515) £15.25 £15.90 806-100 Underglaze 113gm Navy Blue (539) £6.78 £8.13 805-954 Underglaze 113gm Charcoal (516) £6.78 £8.13 806-102 Underglaze 113gm Denim Blue (540) £6.78 £8.13 805-956 Underglaze 113gm Light Grey (517) £6.78 £8.13 806-104 Underglaze 113gm Purple (541) £6.78 £8.13 805-958 Underglaze 113gm Taupe (518) £6.78 £8.13 806-106 Underglaze 113gm Fuschia (542) £6.78 £8.13 805-960 Underglaze 113gm Chamois (519) £6.78 £8.13 806-108 Underglaze 113gm Wisteria (543) £6.78 £8.13 805-962 Underglaze 113gm Light Beige (520) £6.78 £8.13 806-110 Underglaze 113gm Burgundy (544) £6.78 £8.13 805-964 Underglaze 113gm Sand (521) £6.78 £8.13 806-112 Underglaze 113gm Ruby (545) £6.78 £8.13 805-966 Underglaze 113gm Tea (522) £6.78 £8.13 806-118 Underglaze 113gm Rust Red (548) £6.78 £8.13

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 43

catalogue2018a.p65 43 8/7/2018, 3:45 PM UNDERGLAZES (CONTINUED) 806-120 Underglaze 113gm TerraCotta (549) £6.78 £8.13 806-142 Underglaze 113gm Teal Blue (560) £6.78 £8.13 806-122 Underglaze 113gm Salmon (550) £6.78 £8.13 806-144 Underglaze 113gm Dark Red (561) £6.78 £8.13 806-124 Underglaze 113gm Medium Pink (551) £6.78 £8.13 806-146 Underglaze 113gm Bright Red (562) £6.78 £8.13 806-126 Underglaze 113gm Rose (552) £6.78 £8.13 806-148 Underglaze 113gm Bright Orange (563) £6.78 £8.13 806-128 Underglaze 113gm Lilac (553) £6.78 £8.13 806-150 Underglaze 113gm Bright Green (564) £6.78 £8.13 806-130 Underglaze 113gm Royal Purple (554) £6.78 £8.13 806-152 Underglaze 113gm Bright Purple (565) £6.78 £8.13 806-132 Underglaze 113gm Warm Grey (555) £6.78 £8.13 806-154 Underglaze 113gm Dark Purple (566) £6.78 £8.13 806-134 Underglaze 113gm Light Green (556) £6.78 £8.13 806-156 Underglaze 113gm Fire Engine Red (567) £6.78 £8.13 806-136 Underglaze 113gm Leaf Green (557) £6.78 £8.13 806-158 Underglaze 113gm Christmas Red (568) £6.78 £8.13 806-138 Underglaze 113gm Jade (558) £6.78 £8.13 806-160 Underglaze 113gm Neon Orange (569) £6.78 £8.13 806-140 Underglaze 113gm Blue Green (559) £6.78 £8.13 806-162 Underglaze 113gm Hot Pink (570) £6.78 £8.13

GLAZE & BODY STAINS Glaze and Body stains are normally used for the preparation of coloured glazes (5-8% addition) or coloured slips (10-18% addition) followed by sieving through a 120's mesh. Depth of colour can increase with the amount of stain used, in clear glaze it gives bright 806-184 Spite Yellow 25gm £8.16 £9.79 vibrant colour, in white glaze it gives pastel shades. All glaze & body stains are made 806-185 Spite Yellow 100gm £14.81 £17.77 to a stringent safety specification. Nevertheless care should be taken to avoid them being taken into the body by mouth or inhalation. Containers should be tightly closed 806-186 Egg Yellow 25gm £4.88 £5.85 when not in use. 806-187 Egg Yellow 100gm £9.92 £11.90 806-164 Porcelain Pink 25gm £8.13 £9.75 806-188 Peachbloom 25gm £6.96 £8.35 806-165 Porcelain Pink 100gm £14.33 £17.19 806-189 Peachbloom 100gm £13.21 £15.85 806-166 Clover Red 25gm £4.86 £5.83 806-190 Honey 25gm £4.86 £5.83 806-167 Clover Red 100gm £11.42 £13.70 806-191 Honey 100gm £9.08 £10.89 806-168 Lilac Tingle 25gm £7.13 £8.55 806-192 Scorch Brown 25gm £5.75 £6.90 806-169 Lilac Tingle 100gm £17.83 £21.39 806-193 Scorch Brown 100gm £8.08 £9.69 806-170 Speedwell Blue 25gm £3.38 £4.05 806-194 Oxtail 25gm £5.94 £7.12 806-171 Speedwell Blue 100gm £9.66 £11.59 806-195 Oxtail 100gm £10.69 £12.82 806-172 Cornflower Bllue 25gm £8.55 £10.26 806-198 Carbon Black 25gm £10.35 £12.42 806-173 CornFlower Blue 100gm £24.14 £28.96 806-199 Carbon Black 100gm £23.41 £28.09 806-174 Britannia Blue 25gm £5.49 £6.58 806-200 Violet 25gm £7.20 £8.64 806-175 Britannia Blue 100gm £15.71 £18.85 806-201 Violet 100gm £13.99 £16.78 806-176 Turquoise 25gm £3.06 £3.67 806-203 Hi Temp Red (light) 100gm £20.60 £24.72 806-177 Turquoise 100gm £5.49 £6.58 806-178 Derby Green 25gm £2.31 £2.77 806-204 Hi Temp Red (dark) 25gm £6.32 £7.59 806-179 Derby Green 100gm £6.63 £7.95 806-205 Hi Temp Red (dark) 100gm £15.29 £18.34 806-180 Moss Green 25gm £4.89 £5.86 806-206 Hi Temp Yellow 25gm £12.06 £14.47 806-181 Moss Green 100gm £8.45 £10.14 806-207 Hi Temp Yellow 100gm £23.17 £27.80 806-182 Bramley Green 25gm £8.89 £10.66 806-208 Hi Temp Orange 25gm £9.92 £11.90 806-183 Bramley Green 100gm £21.68 £26.01 806-209 Hi Temp Orange 100gm £17.15 £20.58

RAWWMA MATERIALS 807-333 Ball Clay (Hvar) 2.5kg £3.63 £4.35 807-388 Flint 25kg Harmful £32.29 £38.74 807-335 Bentonite 500g £2.53 £3.03 807-369 Iron Chromate 500g £4.70 £5.64 807-336 Bentonite 2.5kg £6.97 £8.36 807-370 Black Iron Oxide 500g Harmful £5.57 £6.68 807-396 Borax Frit 500g Harmful £6.86 £8.23 807-371 Iron Oxide Red 500g Harmful £4.81 £5.77 807-361 Chromium Oxide 100g £4.96 £5.95 807-374 Manganese Carbonate 500g Toxic £5.26 £6.31 807-337 China Clay 500g £3.61 £4.33 807-376 Nickel Oxide 100g Harmful £6.53 £7.83 807-380 China Clay 25kg £22.70 £27.24 807-343 Potash Feldspar 500g £5.71 £6.85 807-363 Cobalt Carbonate 100g Harmful £19.85 £23.82 807-344 Potash Feldspar 2.5kg £5.61 £6.73 807-398 Colmanite 500g £3.39 £4.06 807-390 Potash Feldspar 25kg £27.75 £33.30 807-365 Copper Carbonate 100g Harmful £5.48 £6.57 807-349 Quartz 500g Harmful £7.66 £9.19 807-366 Copper Carbonate 500g Harmful £18.69 £22.42 807-350 Quartz 2.5kg Harmful £4.83 £5.79 807-364 Cobalt Oxide 100g Harmful £26.00 £31.20 807-387 Quartz 25kg Harmful £18.29 £21.94 807-367 Copper Oxide 100g Harmful £4.48 £5.37 807-351 Rutile 500g £9.45 £11.34 807-339 Cornish Stone 500g £5.52 £6.62 807-352 Rutile 25kg £31.25 £37.50 807-382 Cornish Stone 25kg £30.40 £36.48 807-378 Tin Oxide 100g Harmful £8.32 £9.98 807-341 Dolomite 500g £5.32 £6.38 807-353 Titanium Dioxide 500g £5.91 £7.09 807-342 Dolomite 2.5kg £4.50 £5.40 807-354 Titanium Dioxide 2.5kg £30.29 £36.34 807-345 FFF Feldspar 500g £4.96 £5.95 807-377 Vanadium Pentoxide 100g £17.07 £20.48 807-346 FFF Feldspar 2.5kg £5.40 £6.48 807-355 Whiting 500g £2.61 £3.13 807-347 Flint 500g Harmful £4.91 £5.89 807-356 Whiting 2.5kg £7.33 £8.79 807-348 Flint 2.5kg Harmful £5.24 £6.28 807-400 Whiting 25kg £13.60 £16.32

44 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 44 8/7/2018, 4:08 PM RAW MATERIALS (CONTINUED) PROPS 807-359 Zircon Opacifier 500g £5.11 £6.13 807-360 Zircon Opacifier 2.5kg £20.13 £24.15 807-357 Zinc Oxide 500g Harmful £6.50 £7.80 807-358 Zinc Oxide 2.5kg Harmful £20.56 £24.67

UNDERGLAZE PENCILS These lead free underglaze pencils can be operated up to 1200ºC, with the exception of the light red which is 1100ºC. 806-477 Kiln Prop 2.5cm £1.43 £1.71 806-478 Kiln Prop 5cm £2.00 £2.40 806-479 Kiln Prop 7cm £1.65 £1.98 806-480 Kiln Prop 10cm £2.19 £2.62 806-481 Kiln Prop 15cm £3.39 £4.06 806-482 Kiln Prop 20cm £4.29 £5.14 806-483 Kiln Prop 25cm £3.02 £3.62 806-484 Kiln Prop 30cm £3.14 £3.76 806-485 Kiln Prop 40cm £3.37 £4.04 806-486 Connection Piece 1cm high £1.75 £2.10

STILTS For supporting glazed pottery off the kiln shelf.

806-566 Underglaze Pencil: Black £7.85 £9.42 806-568 Underglaze Pencil: Dark Green £8.47 £10.16 806-571 Underglaze Pencil: Light Red (1100ºC) £6.92 £8.30 806-572 Underglaze Pencil: Brown £6.92 £8.30 806-574 Underglaze Pencil: Dark Blue £7.01 £8.41 806-576 Underglaze Pencil: Yellow £7.01 £8.41 806-496 Metal Stilts 8mm high, 25mm point to point (single) £1.74 £2.08 806-584 Underglaze Pencil: Purple £6.92 £8.30 806-498 Stilts 10mm high, 27mm point to point (single) £0.49 £0.58 806-580 Underglaze Pencil: Turquoise £6.92 £8.30 806-500 Stilts 12mm high, 33mm point to point (single) £0.54 £0.64 806-590 Underglaxe Pencil: Orange £7.01 £8.41 806-502 Stilts 14mm high, 51mm point to point (single) £1.06 £1.27 806-506 Stilts 20mm high, 64mm point to point (pack of 10) £6.48 £7.77

KILN FURNITURE CONES Orton cones are used to ensure the kiln is at the required temperature. Set 3 in the kiln, one lower than the target temperature, one at the target and one higher. This allows you to visibly check the temperature of the firing. They are available in two sizes: 25mm (1") mini cones M, or 63mm (2½") standard size S. Supplied in packs of ten.

60ºC 100ºC 150ºC (Heat rate per hour)

806-508 (M/S) Orton Cone 018: 712ºC 722ºC 732ºC £2.04 £2.44 806-510 (M/S) Orton Cone 017: 736ºC 748ºC 761ºC £2.04 £2.44 806-512 (M/S) Orton Cone 016: 769ºC 782ºC 794ºC £2.04 £2.44 806-514 (M/S) Orton Cone 015: 788ºC 802ºC 816ºC £2.04 £2.44 806-516 (M/S) Orton Cone 014: 807ºC 822ºC 836ºC £2.04 £2.44 806-518 (M/S) Orton Cone 013: 837ºC 848ºC 859ºC £2.04 £2.44 806-520 (M/S) Orton Cone 012: 858ºC 869ºC 880ºC £2.04 £2.44 806-522 (M/S) Orton Cone 011: 873ºC 883ºC 892ºC £2.04 £2.44 806-523 (M/S) Orton Cone 010: 903ºC 910ºC 915ºC £2.04 £2.44 806-524 (M/S) Orton Cone 09: 917ºC 922ºC 928ºC £2.04 £2.44 806-526 (M/S) Orton Cone 08: 942ºC 948ºC 954ºC £2.04 £2.44 806-528 (M/S) Orton Cone 07: 973ºC 979ºC 985ºC £2.04 £2.44 806-530 (M/S) Orton Cone 06: 995ºC 1002ºC 1011ºC £2.04 £2.44 806-532 (M/S) Orton Cone 05: 1030ºC 1038ºC 1046ºC £2.04 £2.44 806-534 (M/S) Orton Cone 04: 1060ºC 1065ºC 1070ºC £2.04 £2.44 806-536 (M/S) Orton Cone 03: 1086ºC 1093ºC 1101ºC £2.04 £2.44 806-538 (M/S) Orton Cone 02: 1101ºC 1110ºC 1120ºC £2.04 £2.44 BATT WASH 806-540 (M/S) Orton Cone 01: 1117ºC 1127ºC 1137ºC £2.04 £2.44 806-581 Batt Wash 1/2kg £6.24 £7.48 806-542 (M/S) Orton Cone 1: 1136ºC 1147ºC 1154ºC £2.04 £2.44 Alumina often used in substitute 806-544 (M/S) Orton Cone 2: 1142ºC 1152ºC 1162ºC £2.04 £2.44 806-546 (M/S) Orton Cone 3: 1152ºC 1160ºC 1168ºC £2.04 £2.44 BATTS 806-548 (M/S) Orton Cone 4: 1160ºC 1181ºC 1170ºC £2.04 £2.44 Kiln batts round and half round, maximum operating temperature 1300ºC. 806-550 (M/S) Orton Cone 5: 1184ºC 1194ºC 1205ºC £2.04 £2.44 806-552 (M/S) Orton Cone 6: 1220ºC 1230ºC 1241ºC £2.04 £2.44 806-464 Round Batt 330mm/16mm thick (13" x 5/8") £17.75 £21.30 806-554 (M/S) Orton Cone 7: 1237ºC 1246ºC 1255ºC £2.04 £2.44 806-468 Half Round Batt 388mm/16mm thick (15¼" x 5/8") £22.26 £26.71 806-556 (M/S) Orton Cone 8: 1247ºC 1259ºC 1270ºC £2.04 £2.44 806-470 Round Batt 533mm/19mm thick (21" x 3/4") £51.93 £62.31 806-558 (M/S) Orton Cone 9: 1260ºC 1270ºC 1280ºC £2.04 £2.44 806-472 Half Round Batt 533mm/19mm thick (21" x 3/4") £28.62 £34.34 806-560 (M/S) Orton Cone 10: 1282ºC 1293ºC 1303ºC £2.04 £2.44 806-562 (M/S) Orton Cone 11: 1293ºC 1303ºC 1312ºC £2.04 £2.44

Price is per bag of 10 Cones 5 packs of the same cone type less 25% discount

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 45

catalogue2018a.p65 45 8/7/2018, 4:19 PM BLACK CHUNKY CRANK MODELLING MA TERIALS A strong body with low shrinkage for modelling and handbuilding, ideal for medium to large sculptural forms. Firing range: 1080ºC - 1260ºC (colour: black). CLAY MODELLING MA TERIALS

GREY CLAY 100-335 Black Chunk Crank 12.5kg £22.40 £26.88 Basically a Stoneware Clay, but with an ideal body for modelling. 4 + less 10% discount £20.16 £24.19 (Fires - biscuit 1120ºC to 1290ºC - buff) BLACK SMOOTH A smooth body equivalent to the Black Chunky Crank for modelling and handbuilding, ideal for medium to large 100-051 Grey Clay 5 kg £5.83 £6.99 sculptural forms. 100-052 Grey Clay 25 kg £11.46 £13.75 Firing range: 1080ºC - 1260ºC (colour: black). 4 + less 10% discount £10.31 £12.37 20 + less 15% discount £9.74 £11.69 100-345 Black Smooth Clay 12.5kg £21.65 £25.98 40 + less 20% discount £9.17 £11.00 4 + less 10% discount £19.49 £23.38

TERRACOTTA CLAY ROYAL PORCELAIN A basic terracotta modelling clay, very plastic and excellent Royal Porcelain is a blend of Audrey Blackman and Special for modelling. (Fires at 1080ºC to 1160ºC; will fire a darker Porcelain giving a high plasticity and ease of handling. terracotta colour at the higher temperature.) Developed due to the demand for throwing Porcelains. Firing range:1220ºC - 1280ºC (colour: white and translucent).

100-055 Terracotta Clay 5 kg £6.48 £7.77 100-340 Royal Porcelain 12.5kg £23.92 £28.70 100-056 Terracotta Clay 25 kg £11.38 £13.65 4 + less 10% discount £21.53 £25.83 4 + less 10% discount £10.24 £12.29 20 + less 15% discount £9.67 £11.61 ARCHITECTURAL EARTHSTONE 40 + less 20% discount £9.10 £10.92 This clay will be of interest to anyone producing architectural ceramics - handmade tiles, relief panels, ceramic murals or MILLENNIUM WHITE STONEWARE restoration work. Offering extremely low shrinkage: 6% from A very high quality white stoneware with a high degree plastic at 1260ºC. This effectively means that you make your of plasticity. Suitable for throwing, modelling and casting. tile section to cover the actual area required, the 6% shrinkage allows just sufficient Firing range: 1160ºC - 1260ºC (colour: off-white). space for grouting. Completely frost proof with excellent thermal resistance. Also resistant to warping and cracking. Firing range: 1240ºC - 1300ºC (colour: off white).

100-300 Millennium White Stoneware 12.5kg £12.78 £15.34 100-350 Architectural Earthstone 12.5kg £24.40 £29.28 4 + less 10% discount £11.50 £13.80 4 + less 10% discount £21.96 £26.35

CRANK STONEWARE T S FLAX PAPERCLAYS This clay has a good degree of plasticity, containing a coarse Finely chopped fibres of flax and cellulose added to a range of clays which produces silica grog. Suitable for medium sized sculptural and slab work. very forgiving clay bodies with wide versatility. Offers strength and flexibility while Firing range: 1200ºC - 1280ºC (colour: buff). remaining light in weight. These clays will accept a range of firing types: Raku, Oxidation, Reduction, Salt and Soda. The fibres create a strong but flexible internal structure. The capillary of fibres transfers 100-310 Crank Stoneware 12.5kg £13.44 £16.12 moisture easily and evenly through the clay. Greenware re-wets easily allowing 4 + less 10% discount £12.10 £14.52 alterations to be made. With "Flax Paper Clay" it is possible to build armatures that allow the sculpture to be fired with the armature in place. RED TERRACOTTA GROGGED A grogged terracotta clay with good throwing strength and resistance to cracking. Firing range: 1080ºC-1160ºC (colour: terracotta, firing darker at higher temperature).

100-352 Red Terracotta Grogged 12.5kg £10.06 £12.07 100-360 Paper Clay: Smooth Body 5kg £13.79 £16.54 4 + less 10% discount £9.05 £10.86 100-370 Paper Clay: Grogged Body 5kg £12.80 £15.36 100-380 Paper Clay: White Earthenware 5kg £12.96 £15.55 EARTHSTONE EXTRA SMOOTH 100-390 Paper Clay: Porcelain Body 5kg £16.05 £19.26 A versatile white body with a broad range of applications. 100-400 Paper Clay: Terracotta Body 5kg £11.12 £13.34 The unusually wide firing range means that it can be biscuit 100-410 Paper Clay: Chunky Crank 5kg £11.93 £14.31 fired to 1000ºC for low temperature earthenware glazes or 4 + of the same type - less 10% discount fired at 1160ºC for mid-temperature earthenware/stoneware glazes. This body fires very white, throws well. CASTING SLIPS Firing range: 1160ºC - 1280ºC. As the name suggests, slips for pouring into plaster moulds. For making a quantity of identical works. 100-320 Earthstone Extra Smooth 12.5kg £15.49 £18.58 4 + less 10% discount £13.94 £16.73

PROFESSIONAL WHITE EARTHENWARE A white Earthenware that throws as well as the best of the Stoneware clays. This blend of carefully graded ball clays gives this clay body outstanding plasticity and strength. Ideal for all production techniques including throwing, pressing, 100-420 Casting Slip: White Stoneware 4.544 Ltr (1 gallon) £15.79 £18.94 jigger and jollying. Offers excellent glaze fit. Firing range: 1220ºC - 1280ºC Firing range: 1150ºC-1220ºC. 100-430 Casting Slip: White Earthenware 4.544 Ltr (1 gallon) £20.77 £24.92 Firing range: 1120ºC - 1160ºC 100-330 Professional White Earthenware 12.5kg £17.45 £20.94 100-440 Casting Slip: Special Porcelain 4.544 Ltr (1 gallon) £33.13 £39.75 4 + less 10% discount £15.71 £18.85 Firing range: 1220ºC - 1280ºC

46 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 46 8/7/2018, 7:02 PM NEWCLAY & ANCILLARIES CHAVANT (CONTINUED) Self-hardening, nylon-reinforced off white clay. Ideal for small models and decorative pottery. For use on non- 101-485 Chavant Modelling Clay Medium 907g £8.67 £10.40 rigid armatures, since there is some shrinkage on 5 + less 10% discount £7.80 £9.36 hardening. Literature available on request to purchasers 20 + less 20% discount £6.94 £8.33 of the material. Newclay is ready to use, and is supplied 100 + less 25% discount £6.50 £7.80 in polythene bags. Damps down with water like ordinary clay. Can be fired. 101-490 Chavant Modelling Clay Hard 907g £8.67 £10.40 5 + less 10% discount £7.80 £9.36 100-091 Newclay 4.5 kg £8.00 £9.60 20 + less 20% discount £6.94 £8.33 100-092 Newclay 12.6 kg (28 lb) £13.74 £16.48 100 + less 25% discount £6.50 £7.80 5 + less 10% discount £12.37 £14.84 100-097 Newclay Off White 1kg £3.11 £3.73 LE BEAU TOUCHÉ (GRADE HM) 100-098 Newclay Teracotta 1kg £3.11 £3.73 (Lovely touch!) Extremely smooth modelling clay developed in 1994. Non-drying and sulphur free. NEWCLAY HARDENERS It is an oil based clay to which wax has been added H1 is a blue powder to be made up with water and painted onto the Newclay when it to enhance its smooth characteristics. The comments has hardened, to case-harden it. H2 is a yellow powder, which is kneaded into the on Chavant NSP above also apply to Le Beau Newclay prior to use. Gives all through toughness. For added strength, further baking Touché. Packed in 907g (2 lb) sealed blocks. at 200ºC is recommended. Grade medium only. Colour terracotta red.

100-093 Newclay Hardener H1 125g £2.89 £3.46 101-495 Chavant Le Beau Touché (907g) £8.67 £10.40 100-094 Newclay Hardener H2 226g £4.20 £5.04 5 + less 10% discount £7.80 £9.36 20 + less 20% discount £6.94 £8.33 GLOSS AND SATIN 100 + less 25% discount £6.50 £7.80 Newclay gloss & Satin will give an excellent finish to Newclay, and are quick drying, becoming quite hard, giving further protection to your work. CLAYETTE 100-095 Newclay Gloss 112g £3.37 £4.04 A new suphur free sculpting clay developed to 100-096 Newclay Satin 112g £3.37 £4.04 be non-hardening, odour -free and flexible without being sticky. Clayette is a softer and less tacky CLAYDIUM alternative to the standard range of Chavant NSP Nylon-reinforced, non-toxic, self-hardening modelling clay and will not oxidise, can be left uncovered, clay, which air dries very hard. Hard Claydium can be heated and cooled repeatedly and performs softened in water, and it fires well at 1080ºC. excellently when using silicone rubber to take a mould. Packed in 907g (2 lb) sealed blocks. 100-090 Claydium: Light Grey / Off-White 500g (approx) £1.82 £2.18 10 + less 10% discount £1.64 £1.97 Medium grade Clayette is similar in hardness to Chavant NSP Soft. Off white in colour.

101-475 Chavant Clayette Soft (907g) £8.67 £10.40 OTHER MODELLING MA TERIALS 5 + less 10% discount £7.80 £9.36 20 + less 20% discount £6.94 £8.33 100 + less 25% discount £6.50 £7.80

101-476 Chavant Clayette Medium (907g) £8.67 £10.40 5 + less 10% discount £7.80 £9.36 20 + less 20% discount £6.94 £8.33 100 + less 25% discount £6.50 £7.80 Non Sulphurated Plasteline NSP Professional Oil Based & Le Beau Touché Sculpting Clays MILLIPUT Very versatile Epoxy modelling compound with a wide range of uses. For modelling CHAVANT NSP SCULPTING CLAY maquettes, modelling military figures, repairing ceramics, repairing resin and fibreglass Chavant NSP (Non Sulphurated Plasteline) is a sulphur free professional oil-based and in fact can be used to repair or modify almost anything. Milliput is supplied in packs sculpting clay and is probably the finest quality non-drying modelling clay available. It containing 2 x 56.7g sticks of hardener and resin which should be mixed together in is used extensively by many Sculpture and Film Studios in the USA for creating equal parts until the colour is uniform, before modelling. The resulting putty will set rock models and sculptures prior to having a mould made. We have in this respect found that hard in about 3 hours, although by applying heat the setting time can be reduced to a few the clays perform excellently when using silicone rubber to take a mould. Chavant minutes. Will set under water. When hardended, Milliput can be filed, carved, screwed, NSP Clay has low odour and is certified non-toxic by the Art and Craft Materials drilled, tapped etc. Five colours available - Black, Standard (yellow / grey), Silver Institute in the USA, conforming to ASTM D-4236. Chavant NSP Clay may require grey, White, Terracotta. some heat to soften it to your required working consistency. The ideal softening range is 44º-55ºC. It easily warms in hot air with no cracking or drying. The clay has excellent adhesive properties sticking readily to itself or the armature wire. The Clay is tough but firm, and has the ability to hold excellent detail. The Clay can be smoothed with water, or (taking adequate precautions) lighter fuel or turpentine spirit. Three grades available, soft, medium and hard, supplied in 907g (2 lb) sealed blocks. Colour grey / green.

100-084 Milliput Black 113.4g pack £4.39 £5.26 10 + less 10% discount £3.95 £4.74 100-085 Milliput Standard (yellow / grey) 113.4g pack £2.00 £2.40 10 + less 10% discount £1.80 £2.16 100-086 Milliput Silver / Grey 113.4g pack £3.67 £4.40 10 + less 10% discount £3.30 £3.96 101-480 Chavant Modelling Clay Soft 907g £8.67 £10.40 100-087 Milliput Superfine White 113.4g pack £4.43 £5.31 5 + less 10% discount £7.80 £9.36 10 + less 10% discount £3.99 £4.78 20 + less 20% discount £6.94 £8.33 100-088 Milliput Terracotta 113.4g pack £2.47 £2.96 100 + less 25% discount £6.50 £7.80 10 + less 10% discount £2.22 £2.67

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 47

catalogue2018a.p65 47 8/7/2018, 7:13 PM GREEN STUFF Kneadatite® the original Green Stuff. For fine scale modelling & sculpture. Retains POLYMER CLA YS flexibility & resists stress failure. Working time 1.5 to 2.5 hours. Full cure at 22ºC approx. 24 hours. Use equal parts of blue & yellow strip, knead together until an even SUPER SCULPEY™ green colour. The ultimate sculpting polymer clay. Remains workable until cured (hardened) in a normal domestic oven. Used extensively by film studios and professional modelmakers Irritant world-wide. Also a favourite with doll makers. Rated in the USA (ASTM D-4326) as Non-Toxic, Super Sculpey is an easy condition polymer clay needing minimal preparation before use (hand kneading or rolling through a pasta machine). It is translucent pink- beige in colour and features very fine tooling and detailing characteristics, and does not ‘fill in’ after tooling. Super Sculpey bakes to a ceramic like hardness and can be sanded 100-081 Green Stuff, approx. 30cm strip £4.39 £5.26 to a fine finish. Super Sculpey should be cured in a preheated oven (135ºC / 275ºF) for 00-082 Green Stuff, approx. 90cm strip £8.62 £10.34 15 minutes per quarter inch of thickness (6mm). Where models are over an inch (25mm) of thickness a layering technique and part baking is recommended. Super Sculpey is frequently the chosen clay for making prototypes from which moulds are PLASTER BANDAGE then taken. Further copies are then produced from the moulds. Finished sculptures in Plaster impregnated bandage. Can be used for modelling, collages, stage props, mask the clay may be finished with acrylic paint. Super Sculpey is supplied in 454g (1 lb) making, murals, railway modelling, general craft work or for mould cases. The material boxes. Colour pink / beige only. is activiated by putting together three or four strips of pre-cut bandage and immersing in clean water for a couple of seconds, then squeezing gently and the plaster smoothed SUPER SCULPEY FIRM™ into the bandage over a pre-made wire or aluminium mesh framework. Will set in about Super Sculpey Firm is the answer when a higher level of detail is required. Easy to 5 minutes and be hard in 30 minutes. carve, tool and detail without the blurring and bending seen when using softer polymer Plaster Bandage is supplied in: clays, being grey in colour allows the sculptor to see even the smallest detail. Can be - 15cm x 2.7 metre rolls blended with super sculpey to achieve a medium grade hardness. After baking Sculpey - Mod-Roc x 6.35kg bag of small rolls / offcuts. Firm can be sanded, drilled, carved and painted using acrylics.

100-110 Plaster Bandage 15cm x 2.7 metre roll £2.62 £3.14 10 + less 10% discount £2.36 £2.83 50 + less 15% discount £2.23 £2.68

100-115 Mod-Roc 6.35 kg Bag £32.14 £38.56 100-275 Super Sculpey™ 454g (1 lb) £10.59 £12.70 10 + less 10% discount £28.93 £34.71 10 + less 10% discount £9.53 £11.44 50 + less 15% discount £27.32 £32.78 100-275D Super Sculpey Firm™ 454g (1lb) £11.56 £13.87 10 + less 10% discount £10.40 £12.48 NEWPLAST An excellent basic modelling material that is suitable for both children and adults alike. TRANSLUCENT LIQUID SCULPEY Soft and pliable, so easily modelled. Non-drying so can be used time after time. Non- A hugely versatile bakeable liquid polymer medium. toxic. Available in 11 colours. (Colours shown are only an indication.) Sharing many of the same properties as solid polymer clay but with a number of characteristics that offer unique possibilities, when oil paints are mixed it can be an enamel, a glaze or backfilling compound. When pigments or mica powders are mixed it can be a stipple, metalic glaze or grout for polymer clay pieces. It can be used as an image transfer medium and works as a terrific adhesive (activated after baking) , it increases the bond between raw layers of clay, and when adding raw layers to previously baked clay.

100-065 Newplast: Dark Brown 500g £1.71 £1.96 100-066 Newplast: Green 500g £1.71 £1.96 100-282 Translucent liquid Sculpey 224g (8oz) £7.29 £8.74 100-067 Newplast: Blue 500g £1.71 £1.96 100-068 Newplast: Red 500g £1.71 £1.96 CLAY GUN 100-069 Newplast: Yellow 500g £1.71 £1.96 Supplied with 18 dies to create a range of 100-070 Newplast: Terracotta 500g £1.71 £1.96 differently shaped and sized extrusions, 100-071 Newplast: Stone 500g £1.71 £1.96 suitable for use with any modelling medium 100-072 Newplast: Grey 500g £1.71 £1.96 and particularly good when used with oil 100-073 Newplast: White 500g £1.71 £1.96 based clays such as Chavant or polymer 100-074 Newplast: Black 500g £1.71 £1.96 clays like Super Sculpey 100-075 Newplast: Peach 500g £1.71 £1.96

20 + less 10% discount £1.54 £1.85 100 + less 20% discount £1.37 £1.64 Discount only available on same colour purchases 806-400 Clay Gun 9cm Body with Dies £9.18 £11.01

48 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 48 8/7/2018, 7:20 PM WHITE MODELLING WAX WAXES Scopas White Modelling Wax is an extra fine French-style filled modelling wax for work requiring great detail. Not suitable for lost wax casting. This wax has a firm feel PARAFFIN WAX at normal room temperature, but will soften easily in the hand, building easily onto itself. A fully refined paraffin wax in pellet form. Used for candle making or for modifying other Similar to the old French White Wax. Excellent with silicone rubber. waxes. Melting point approximately 57ºC - 60ºC (135ºF - 140ºF). SG = 0.9. 101-450 Scopas White Modelling Wax 500g £6.08 £7.29 101-130 Paraffin Wax 500g £2.43 £2.91 101-460 Scopas White Modelling Wax 5 kg £45.51 £54.61 101-135 Paraffin Wax 5 kg £16.12 £19.34 10 + less 10% discount £40.97 £49.16 101-140 Paraffin Wax 25 kg £59.49 £71.38 4 + less 10% discount £53.54 £64.25 WHITE BEESWAX A fully refined white Beeswax in pellet form for ease of use. Can be used to blend and AMBER ROSIN modify other waxes, or dissolve in Pure Turpentine to make a fine beeswax polish. For modifying waxes. Rosin added to wax (by melting) will harden it; will not harden Melting point 61ºC - 65ºC (142ºF - 149ºF); Specific Gravity 0.96. Type B Wax. Irritant 101-220 White Beeswax (Pellets) 500g £10.47 £12.56 101-200 Amber Rosin 500g £7.45 £8.94 101-230 White Beeswax (Pellets) 5kg £85.07 £102.08 101-240 White Beeswax (Pellets) 25kg £377.83 £453.39 MICROCRYSTALLINE WAX Non-toxic, almost odourless wax, very fluid when melted. This wax has a wide BLUE WAX variety of uses, being flexible, ductile, cohesive, non-staining. Uses include polishes, Blue Machining and Carving Wax. Specially formulated wax. Can be carved, modelling, candle making and blending with other waxes. Melting point approximately sawn, drilled, tapped and turned by normal processes and CNC mills, lathes and 71ºC (160ºF). Supplied in pellet form. machining centres, giving a close finish to that of metal components; no coolant or lubricant is required, and machining creates heavy swarf with no airborne dust. Waste 101-271 Microcrystalline Wax (Pellets) 500g £3.62 £4.34 can be re-claimed by re-melting and casting into suitable moulds - a silicone release 101-272 Microcrystalline Wax (Pellets) 5 kg £33.32 £39.98 agent may be used. Softens at 110ºC to 120ºC (230ºF - 248ºF), melts at 120ºC 101-274 Microcrystalline Wax (Pellets) 25 kg £127.60 £153.12 (248ºF). Flashpoint is 280ºC (536ºF). Specific Gravity 0.93. Shrinkage when casting: 10 + less 10% discount £114.84 £137.81 about 6.5%.

GREEN CASTING WAX A high quality casting wax for use in lost wax casting. Melting point 63ºC - 66ºC (145.5ºF - 151ºF). The wax casts easily, withstands handling when cold without cracking, and burns out cleanly. This wax is fairly firm and so is suitable for carving, 101-951 Blue Wax 140mm x 75mm x 50mm Bar (approx.) £12.78 £15.33 modelling with wax modelling tools, pouring and painting into moulds, and casting in the 10 + less 10% discount £11.50 £13.80 Centricast Machine. To make a hand modelling wax we recommend mixing Green Casting Wax with Type B Wax. WAX PIGMENTS Concentrated wax pigments that have been blended into a carrier wax and then 101-500 Green Casting Wax 500g £7.09 £8.50 granulated for quick and easy dispersion into large amounts of wax. Very little is 101-510 Green Casting Wax 5 kg £53.90 £64.68 required - add to suit. Available in eight colours which can be intermixed to produce 10 + less 10% discount £48.51 £58.21 others. Colours available: red, blue, yellow, orange, green, purple, black & white.

SCOPAS RED MODELLING WAX Scopas Red Modelling Wax is a general purpose red modelling wax, containing natural beeswax, paraffin wax and rosin. This has been a basic standard formula for over 100 years. Specially blended for modelling and suitable for lost wax casting. The wax may be softened or hardened by adding more paraffin wax or amber rosin. 101-300 Wax Pigment: Red 50g £5.77 £6.92 Melting point about 52ºC (126ºF). 101-305 Wax Pigment: Red 1 kg £71.40 £85.68 101-310 Wax Pigment: Blue 50g £5.77 £6.92 101-315 Wax Pigment: Blue 1 kg £71.40 £85.68 101-320 Wax Pigment: Yellow 50g £5.77 £6.92 101-010 Scopas Red Modelling Wax 500g £8.24 £9.70 101-325 Wax Pigment: Yellow 1 kg £71.40 £85.68 101-020 Scopas Red Modelling Wax 5 kg £68.70 £82.44 101-330 Wax Pigment: Orange 50g £5.77 £6.92 10 + less 10% discount £61.83 £74.20 101-335 Wax Pigment: Orange 1 kg £71.40 £85.68 101-340 Wax Pigment: Green 50g £5.77 £6.92 TYPE B MODELLING WAX 101-345 Wax Pigment: Green 1 kg £71.40 £85.68 Scopas Modelling Wax Type B is a softer modelling wax, easily softened by the heat 101-350 Wax Pigment: Purple 50g £5.77 £6.92 from your hands. It is easy to model and sticks to itself readily. Suitable for lost wax 101-355 Wax Pigment: Purple 1 kg £71.40 £85.68 casting. We have found that this wax will not harden by adding rosin. Modify with a 101-360 Wax Pigment: Black 50g £5.77 £6.92 harder wax such as Green Casting Wax to produce a firmer modelling wax. Available 101-365 Wax Pigment: Black 1 kg £71.40 £85.68 in either dark brown or yellow, sold in 500g and in 5 kg slabs. Melting Point 68ºC - 101-370 Wax Pigment: White 50g £5.77 £6.92 74ºC (154.4ºF - 165ºF). 101-375 Wax Pigment: White1 kg £71.40 £85.68

GLASS WAX Glass wax is specially formulated to give a unique 101-050 Modelling Wax Type B: Brown 500g £7.51 £8.07 glass effect. For use as theatrical glass or for special 101-060 Modelling Wax Type B: Brown 5 kg £41.73 £50.07 effects. Glass Wax can be heated and hand poured 10 + less 10% discount £37.56 £45.07 when molten; for best results use silicone rubber or 101-100 Modelling Wax Type B: Yellow 500g £7.22 £8.66 silicone coated moulds. Melting Point: 115ºC, Pouring 101-110 Modelling Wax Type B: Yellow 5 kg £41.38 £49.65 Temperature: 120ºC -140ºC, Specific Gravity: 1.1. 10 + less 10% discount £37.24 £44.69

TERRACOTTA WAX 101-160 Glass Wax 500g £7.04 £8.44 A very soft, terracotta coloured modelling wax. Has a similar feel to terracotta modelling 101-162 Glass Wax 5 kg £50.37 £60.44 clay, but without drying out. Also very good as a soft impression material. Not suitable 101-162 Glass Wax 25kg £205.83 £246.99 for lost wax casting.

101-440 Terracotta Wax 500g £6.94 £8.32 see also 101-442 Terracotta Wax 5 kg £53.30 £63.96 WAX MODELLING TOOLS & ALCOHOL BURNER (page 55) and 10 + less 10% discount £47.97 £57.56 WAX THERMOMETER & MELTERS (page 62 Hot Melt Vinyl Rubber)

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 49

catalogue2018a.p65 49 8/7/2018, 7:33 PM MODELLING TOOLS

STUDENT HARDWOOD MODELLING TOOLS CLAY MODELLING TOOLS A range of eight hardwood modelling tools, offering a good variety of shapes; ideal for students. Tools are 20cm (8") long. Also available as a set in an expanding plastic Tiranti Tool Box. PROFESSIONAL HARDWOOD MODELLING TOOLS Several series of professional hardwood tools for the discerning sculptor and modelmaker. Made from close-grained hardwood or boxwood, as available. The letter denotes the style of tool, the number gives an indication of the length in inches. Shapes shown are a guide only. P8

R8 B

T8 104-010 B5" Hardwood Modelling Tool £3.18 £3.81 104-020 B6" Hardwood Modelling Tool £2.99 £3.58 104-030 B7" Hardwood Modelling Tool £3.06 £3.67 V8 104-040 B8" Hardwood Modelling Tool £2.86 £3.43 104-060 B10" Hardwood Modelling Tool £4.14 £4.96 W8

C X8

104-070 C6" Hardwood Modelling Tool £3.14 £3.76 Y8

H Z8

104-200 H7" Hardwood Modelling Tool £3.95 £4.74 104-510 P8 Student Hardwood Modelling Tool £1.80 £2.16 104-550 R8 Student Hardwood Modelling Tool £2.30 £2.76 104-590 T8 Student Hardwood Modelling Tool £2.90 £3.48 104-610 V8 Student Hardwood Modelling Tool £1.80 £2.16 104-630 W8 Student Hardwood Modelling Tool £2.90 £3.48 104-650 X8 Student Hardwood Modelling Tool £2.90 £3.48 104-670 Y8 Student Hardwood Modelling Tool £2.75 £3.30 K 104-690 Z8 Student Hardwood Modelling Tool £1.53 £1.83 104-695 Student Hardwood Tools - Set of 8 in Box £14.39 £17.26

104-220 K6" Hardwood Modelling Tool £2.71 £3.25 HARDWOOD MODELLING TOOLS SET 104-240 K10" Hardwood Modelling Tool £3.26 £3.91 A set of 10 basic hardwood modelling tools, offering excellent value; ideal for children, beginners and students. Approx 15cm (6") long.

104-250 KO5" Hardwood Modelling Tool £2.93 £3.51

‘M’ SERIES HARDWOOD MODELLING TOOLS A series of thin small hardwood tools for delicate detailed work. M2 & 8 are 15cm (6") in length; M4, 6 and 12 are 12.7cm (5") long.

M6 104-698 Hardwood Modelling Tools - Set of 10 £7.61 £9.13 M8 'S' SERIES MODELLING TOOL M12 Designed By Philippe Faraut and featuring two pointed cups this tool is ideal for shaping eyes and ears. Length 7" (15cm), now made in glass infused plastic. 104-310 M2 Hardwood Modelling Tool £3.22 £3.86 104-330 M4 Hardwood Modelling Tool £3.57 £4.28 104-350 M6 Hardwood Modelling Tool £3.22 £3.86 104-370 M8 Hardwood Modelling Tool £3.84 £4.60 104-410 M12 Hardwood Modelling Tool £3.22 £3.86 104-009 S7 Modelling tool 7" (15cm) £9.46 £11.35

50 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 50 8/7/2018, 7:42 PM FINGER TOOLS SCULPTURE THUMB A new Design By Philippe Faraut these tools are ideal to shape fingers, toes and hair A short, broad, S shaped sculpture thumb. Length 5" (12.5cm) width 3/4" (2cm) texture Each tool has a straight tip for shaping fingers and toes and one curved tip for fingernails and toe nails. Available as a complete set or individually in 4mm, 6mm, 8mm, 10mm, and 12mm. Sizes designed for ¼ to 1½ life-size sculptures. Made in a glass infused plastic to optimize the weight, sharpness and rigidity.

104-105 Sculpture Thumb £1.84 £2.20 PLASTIC MODELLING TOOLS An inexpensive set of 7 modelling tools manufactured in strong injection moulded plastic. Ideal for children and beginners. Length 15cm (6").

104-420 Finger tools (set of 5) £37.28 £44.73 104-425 Finger tool 4mm £7.58 £9.09 104-430 Finger tool 6mm £7.58 £9.09 104-435 Finger tool 8mm £7.58 £9.09 104-700 Plastic Modelling Tools - Set of 7 £2.42 £2.90 104-440 Finger tool 10mm £7.58 £9.09 104-445 Finger tool 12mm £7.58 £9.09 PLASTIC MODELLING / LOOP TOOLS A set of 8 plastic modelling tools manufactured in strong injection moulded plastic, featuring in-moulded ribbon loops. Ideal for children and beginners. Length 19cm (7½"). CLAY SHAPERS A new approach to working with clay, soft wax and modelling materials, plaster, heavy body paints and adhesives. The black rubber tips clean easily, and can be cleaned in solvents. Use to:- • model clay, warm wax and other modelling materials • create textures and marks • apply glue for papier-mache and collage • smooth throwing / scoring marks - even hand building • apply wax resist to pottery • carve patterns through slips and glazes • work with tough adhesives

There are five tip shapes each in four sizes: No.2 - 4mm, No.6 - 8mm, No.10 - 11mm, No. 16 - 14mm.

Flat Chisel 104-701 Plastic Modelling / Loop Tools - Set of 8 £6.89 £8.26

COMBINATION MODELLING TOOLS Taper Point Combination wire and wooden modelling tools. Angle loop and offset loop share the same modelling profile as our "B" series hardwood tools. Cup Chisel

Cup Round Round End

Angle Chisel Offset Loop

104-705 No.2 Clay Shaper - Taper Point £4.67 £5.60 808-200 Round End Wire Loop 20cmcm (8") £1.53 £1.83 104-710 No.2 Clay Shaper - Cup Round £4.67 £5.60 808-204 Offset Loop "B" type 16.5cm (6½") £3.18 £3.81 104-715 No.2 Clay Shaper - Cup Chisel £4.67 £5.60 104-720 No.2 Clay Shaper - Flat Chisel £4.67 £5.60 RUBBER KIDNEYS 104-725 No.2 Clay Shaper - Angle Chisel £4.67 £5.60 Soft red rubber kidney palettes in two sizes. 104-730 No.6 Clay Shaper - Taper Point £6.12 £7.34 104-735 No.6 Clay Shaper - Cup Round £6.12 £7.34 104-740 No.6 Clay Shaper - Cup Chisel £6.12 £7.34 104-745 No.6 Clay Shaper - Flat Chisel £6.12 £7.34 104-750 No.6 Clay Shaper - Angle Chisel £6.12 £7.34

104-755 No.10 Clay Shaper - Taper Point £7.65 £9.18 104-760 No.10 Clay Shaper - Cup Round £7.65 £9.18 104-765 No.10 Clay Shaper - Cup Chisel £7.65 £9.18 104-770 No.10 Clay Shaper - Flat Chisel £7.65 £9.18 203-100 Soft Rubber Kidney - Small £2.08 £2.49 104-775 No.10 Clay Shaper - Angle Chisel £7.65 £9.18 203-103 Soft Rubber Kidney - Medium £1.89 £2.26 203-105 Soft Rubber Kidney - Large £2.08 £2.49 104-780 No.16 Clay Shaper - Taper Point £11.04 £13.24 104-785 No.16 Clay Shaper - Cup Round £11.04 £13.24 Also available is a set of four rubber kidneys comprising: Hard (Black) Small, Hard 104-790 No.16 Clay Shaper - Cup Chisel £11.04 £13.24 (Black) Large, Soft (Blue) Small and Soft (Blue) Large. 104-795 No.16 Clay Shaper - Flat Chisel £11.04 £13.24 104-800 No.16 Clay Shaper - Angle Chisel £11.04 £13.24 203-110 Rubber Kidneys - Set of 4 £5.77 £6.92

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 51

catalogue2018a.p65 51 8/7/2018, 7:48 PM CLAY CUTTERS WIRE MODELLING TOOL SETS Clay cutters with wooden handles at both ends; simple, effective and yet inexpensive. Nylon Clay Cutters are approximately 45cm (18") long; Steel Wire Clay Cutters are approximately 40cm (16") long.

100-060 Nylon Clay Cutters £1.23 £1.47 10 + less 10% discount £1.11 £1.33

100-061 Heavy Duty Steel Wire Clay Cutters £3.66 £4.39 10 + less 10% discount £3.29 £3.95

WIRE MODELLING TOOLS

STAINLESS STEEL WIRE MODELLING TOOLS 806-404 Set of 6 Wire Modelling Tools 20cm £8.44 £10.12 Stainless steel wire modelling tools, excellent for use with clay or wax etc. Available in three shapes each in three sizes: 13cm (5"), 18cm (7") and 20cm (8"). The wire ends and the handles are stainless steel.

806-414 Set of 10 Wire Modelling Tools 15cm £10.59 £12.70 105-508 508 Stainless Steel Wire Tool 13cm (5") £3.04 £3.64 105-509 509 Stainless Steel Wire Tool 13cm (5") £3.04 £3.64 DOUBLE RIBBON TOOLS 20CM - SET OF 6 105-510 510 Stainless Steel Wire Tool 13cm (5") £3.24 £3.88 A Set of six inexpensive double ended Ribbon Tools, offering an assortment of useful shapes. Ends are made from stainless steel ribbon with sharpened edges. Tools are 105-708 708 Stainless Steel Wire Tool 18cm (7") £3.72 £4.46 approx 20cm (8") long. 105-709 709 Stainless Steel Wire Tool 18cm (7") £3.72 £4.46 105-710 710 Stainless Steel Wire Tool 18cm (7") £3.72 £4.46

105-808 808 Stainless Steel Wire Tool 20cm (8") £4.00 £4.80 105-809 809 Stainless Steel Wire Tool 20cm (8") £4.00 £4.80 105-810 810 Stainless Steel Wire Tool 20cm (8") £4.00 £4.80

LARGE DETAIL WIRE TOOLS Large wire tools with stainless steel ribbon edges.

104-804 Large Detail Wire Tool (30cm) £3.65 £4.38 104-805 Double Ribbon Tools 20cm - Set of 6 £9.55 £11.46

52 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 52 8/7/2018, 7:54 PM STRIP TOOLS BATTONS Set of 4 guide battons for rolling clay. set comprises;

1 x Pair of 1/8" (3.17mm) battons 1 x Pair of 1/4" (6.35mm) battons 1 x Pair of 3/8" (9.53mm) battons 1 x Pair of 1/2" (12.5mm) battons

808-212 Battons 24" (60cm) set of 4 £7.58 £9.09

806-570 Set of 3 Strip Tools 16cm £6.69 £8.03 BOW HARP Internal cut 10" (250mm) across. Varying thicknesses of clay can be cut by adjusting the wire on the 10mm spaced notches on the frame. DEEP CLEAN TOOL for difficult to access or heavily undercut areas.

806-386 Bow Harp 12" (30cm) £20.25 £24.30 104-810 Deep Clean Tool 23cm (9") £2.96 £3.55 806-387 Spare Wire for Bow Harp £1.94 £2.32

POTTERY TOOLS BOW HARP 3" A compact clay harp for refining and shaping clay surfaces, made from spring steel and using stainless steel wire POTTERY TOOL SET Wooden potters rib, modelling tool, ribbon tool, sponge, needle tool, loop tool, metal scraper and wire clay cutter.

806-385 Clay Cutting Bow 3" £2.36 £2.83

HANDLE MAKERS

806-436 Handle Maker Small 16mm wide, 9mm deep £1.88 £2.25 806-438 Handle Maker Large 25mm wide, 15mm deep £2.19 £2.62

HOLE CUTTERS

806-410 Pottery Tool Set £10.55 £12.66

806-424 Hole Cutter 4.7mm (3/16") £1.59 £1.90 ROLLING PINS 806-426 Hole Cutter 7.9mm (5/16") £1.80 £2.16 Solid Beech Rolling pins for rolling out clays and other materials. 806-428 Hole Cutter 12.7mm (1/2") £2.28 £2.73 806-423 Hole Cutter 22mm £2.59 £3.10

NEEDLE

806-594 Small Rolling Pin 355 x 48mm (14" x 1¾") £6.30 £7.56 806-592 Large Rolling Pin 510 x 48mm (20" x 1¾") £7.53 £9.03 806-446 Pro Needle £1.36 £1.63

SLIP TRAILER HAND HELD CLAY EXTRUDER Available individually or as a set containing 4 interchangeable nibs with different sized Medium sized hand held clay extruder apertures. supplied with 5 dies and 1 blank that can be cut to your own design. Dies include square, round, triangle and a group of small round profiles. Clay can be loaded at either end of the barrel. The extruder is easily dissassembled for cleaning and features metal and reinforced composite parts.

806-406 Slip Trailer £5.03 £6.03 806-401 Hand Held Clay Extruder + Dies & Blanks £27.17 £32.60 806-408 Slip Trailer with Changeable Nibs x 4 £9.07 £10.88

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 53

catalogue2018a.p65 53 8/7/2018, 8:00 PM RIB SET OTHER POTTERY TOOLS

806-459 Sgraffitto Point/Spear 16.5cm (6.5") £2.38 £2.85

806-455 Fettling Tool 20cm (8") £2.32 £2.78

STAINLESS STEEL POTTERY TOOLS

806-402 Set of 10 Wooden Ribs £6.53 £7.83 806-402a Wooden Rib - 12cm Quadrant £0.74 £0.88 433 806-402b Wooden Rib - 14cm Half round £0.74 £0.88 806-402c Wooden Rib - 10cm Half Teardrop £0.74 £0.88 453 806-402d Wooden Rib - 10cm Half Round £0.74 £0.88 806-402e Wooden Rib - 10cm Teardrop £0.74 £0.88 806-402f Wooden Rib - 11cm Trapezium £0.74 £0.88 454 806-402g Wooden Rib - 10cm Knotched rectangle £0.74 £0.88 806-402h Wooden Rib - 10cm Quadrant £0.74 £0.88 806-402i Wooden Rib - 10cm Rectangle £0.74 £0.88 455 806-402j Wooden Rib - 12cm Narrow Half-round £0.74 £0.88 456 KNIVES 806-462 No. 433 Small Chisel + Spoon £3.62 £4.34 806-463 No. 453 Leaf Small + Spear £3.62 £4.34 806-460 No. 454 Leaf Straight + Curved £4.14 £4.96 806-461 No. 455 Needle + Leaf Curved £4.68 £5.61 Taper point 806-388 No. 456 Sgraffito Offset Point/Spear £4.14 £4.96

POTTERY TURNING TOOLS Short point Turning tools used to accurately shape, contour and trim clay on the wheel, also effective for shaping plaster forms using the sharp groudn edges. C D E Long point 806-422 Taper Point Knife £2.20 £2.64 806-420 Short Point Knife £1.73 £2.07 806-418 Long Point Knife £3.08 £3.69

PALLET KNIVES

flat

Trowel 807-314 "C" Triangular Turning tool 20cm £4.22 £5.06 807-316 "D" Triangular Turning tool 15cm £4.22 £5.06 807-318 "E" Pear Turning Tool 20cm £4.22 £5.06 Skew 807-323 Triangular Stainless Steel Turning Tool (Long) £5.61 £6.73 806-440 Pallet Knife Flat 8cm blade £1.69 £2.02 806-442 Pallet Knife Trowel 6.5cm blade £2.73 £3.27 806-444 Pallet Knife Skew 12cm blade £3.39 £4.06 DOTTLE A small tapered sponge used for the removal of seams and excess material from difficult to reach areas of clay, inside handles, vessel opening and spouts etc. Derived SPONGE from a term used to describe a small plug of tobacco left in a pipe the word 'dottle' now refers to style of item used to remove it.

406-755 Small Sponge Stick Tapered (Dottle) £2.09 £2.50 806-405 Sponge 7.5cm x 3cm £1.17 £1.40

54 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 54 8/7/2018, 8:13 PM STAINLESS STEEL MODELLING WAX MODELLING TOOLS

TOOLS STAINLESS STEEL WAX MODELLING TOOLS A series of fine stainless steel wax modelling tools. These tools can be heated lightly STAINLESS STEEL CLAY MODELLING TOOLS over the alcohol burner to enable easy working on even the hardest waxes. The A series of eight Stainless Steel Clay Modelling Tools made to the original shapes of our No.157 has flexible ends. These tools are also suitable for use with other modelling Professional Hardwood Modelling Tools. Easy clean, high polish finish. Can also be materials. Also available as a set in an expanding plastic Tiranti Tool Box. used for modelling polymer clays, waxes, Chavant, plastilines and even plaster. The number indicates the approximate size of the tool in inches. Available individually or as 72 a set in an expanding plastic Tiranti Tool Box. 88

117

118

148

149

150

103-190 SB5 Stainless Steel Clay Modelling Tool £5.05 £6.06 155 103-191 SB6 Stainless Steel Clay Modelling Tool £4.98 £5.97 103-192 SB7 Stainless Steel Clay Modelling Tool £4.85 £5.82 103-193 SB8 Stainless Steel Clay Modelling Tool £5.33 £6.39 157 103-195 SC6 Stainless Steel Clay Modelling Tool £5.03 £6.03 103-196 SK6 Stainless Steel Clay Modelling Tool £4.64 £5.56 103-197 SKO5 Stainless Steel Clay Modelling Tool £4.85 £5.82 103-198 SKO7 Stainless Steel Clay Modelling Tool £6.12 £7.34 average length of tools 15cm 103-199 Stainless Steel Clay Tools - Set of 8 in Box £34.37 £41.24

103-200 No.72 Stainless Steel Wax Tool £5.52 £6.62 BM SERIES STAINLESS STEEL MODELLING TOOLS 103-210 No.88 Stainless Steel Wax Tool £5.24 £6.28 BM Series fine stainless steel modelling tools. They have been designed for very fine 103-220 No.117 Stainless Steel Wax Tool £5.24 £6.28 detailed work. Use with any modelling material, particularly wax; can be used with the 103-230 No.118 Stainless Steel Wax Tool £5.24 £6.28 alcohol burner. Also available as a set in an expanding plastic Tiranti Tool Box. 103-240 No.148 Stainless Steel Wax Tool £5.24 £6.28 103-250 No.149 Stainless Steel Wax Tool £5.24 £6.28 103-260 No.150 Stainless Steel Wax Tool £5.24 £6.28 103-270 No.155 Stainless Steel Wax Tool £5.24 £6.28 BM2 (15.5cm) 103-280 No.157 Stainless Steel Wax Tool £5.79 £6.94 103-290 Stainless Steel Wax Tools - Set of 9 in Box £39.50 £47.40 BM6 (12.5cm)

BM8 (14.5cm) ALCOHOL BURNER Alcohol burner, all in stainless steel, complete with wick and stainless steel slip lid. Burns with a clean flame on methylated spirits. Essential when modelling with wax BM9 (12.5cm) and working wax for lost wax casting.

BM10 (13.5cm)

BM11 (13.5cm)

BM12 (13.5cm)

BM13 (13.5cm)

BM14 (13.5cm)

103-132 BM2 Stainless Steel Modelling Tool £5.29 £6.34 103-136 BM6 Stainless Steel Modelling Tool £5.29 £6.34 103-138 BM8 Stainless Steel Modelling Tool £5.29 £6.34 103-139 BM9 Stainless Steel Modelling Tool £5.29 £6.34 103-140 BM10 Stainless Steel Modelling Tool £5.29 £6.34 102-112 Alcohol Burner £7.98 £9.57 103-150 BM11 Stainless Steel Modelling Tool £5.29 £6.34 102-114 Spare Wick for Alcohol Burner £0.36 £0.43 103-160 BM12 Stainless Steel Modelling Tool £5.29 £6.34 5 + less 20% discount £0.29 £0.35 103-170 BM13 Stainless Steel Modelling Tool £5.29 £6.34 103-180 BM14 Stainless Steel Modelling Tool £5.29 £6.34 103-185 BM Stainless Steel Tools - Set of 9 in Box £36.18 £43.41

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 55

catalogue2018a.p65 55 8/7/2018, 8:18 PM DENTAL TOOLS

STAINLESS STEEL DENTAL TOOLS Finely made Dental Tools; useful for small detail modelling, and general purpose use in modelling, mould-making and casting. Also available as a set in an expanding plastic Tiranti Tool Box. 204-040 Blue Steel Rect. Scraper 5cm x 23cm £0.96 £1.15 x 0.38mm (2" x 9" x 0.015") 205-040 Stainless Steel Rect. Scraper 5cm x 23cm £1.15 £1.38 SA x 0.38mm (2" x 9" x 0.015")

SD 204-050 Blue Steel Thin Flex. Rect. Scraper 5cm x 10cm £0.37 £0.44 x 0.25mm (2" x 4" x 0.010") 204-060 Blue Steel Thick Flex. Rect. Scraper 5cm x 10cm £0.43 £0.51 SE x 0.38mm (2" x 4" x 0.015")

SF 205-050 S/Steel Thin Flex. Rect. Scraper 5cm x 10cm £0.67 £0.80 x 0.25mm (2" x 4" x 0.010") 205-060 S/Steel Thick Flex. Rect. Scraper 5cm x 10cm £0.67 £0.80 SG x 0.38mm (2" x 4" x 0.015")

SH JOINT RULES SI PLASTERERS' JOINT RULES Quality engineered steel Joint rules with a sharp beveled edge, used for 'ruling in' SJ plaster coving and panel mouldings they are equally at home cleaning up and leveling flat areas of plaster, available in three lengths. SK

SL average length of tools 14.5cm

103-010 SA Stainless Steel Dental Tool £5.20 £6.24 103-020 SB Stainless Steel Dental Tool £5.20 £6.24 103-030 SC Stainless Steel Dental Tool £5.20 £6.24 103-040 SD Stainless Steel Dental Tool £5.20 £6.24 103-050 SE Stainless Steel Dental Tool £5.20 £6.24 103-060 SF Stainless Steel Dental Tool £5.20 £6.24 103-070 SG Stainless Steel Dental Tool £5.20 £6.24 103-080 SH Stainless Steel Dental Tool £5.20 £6.24 103-090 SI Stainless Steel Dental Tool £5.20 £6.24 303-100 Joint Rule 3" (75mm) £8.64 £10.36 103-100 SJ Stainless Steel Dental Tool £5.20 £6.24 303-110 Joint Rule 4" (100mm) £9.14 £10.96 103-110 SK Stainless Steel Dental Tool £5.20 £6.24 303-120 Joint Rule 6" (150mm) £10.19 £12.22 103-120 SL Stainless Steel Dental Tool £5.20 £6.24 303-130 Joint Rule 8" (200mm) £11.63 £13.95 103-125 Stainless Steel Dental Tools - Set of 12 in Box £52.44 £62.92 303-140 Joint Rule 10" (250mm) £14.10 £16.92 303-150 Joint Rule 12" (300mm) £15.53 £18.63 FLEXIBLE STEEL SCRAPERS METAL PLASTER / MODELLING FLEXIBLE STEEL SCRAPERS TOOLS Thin, flexible steel scrapers available in Blue Steel or Stainless Steel. PLASTERERS' SMALL TOOLS Solid forged, hardened and tempered spring steel blades, taper ground for maximum flexibility. Much used by decorative plasterers. There are two shapes available each in three sizes. (Size refers to width across square end.)

kidney scraper toothed kidney scraper 204-010 Blue Steel Kidney Scraper 10cm £0.43 £0.51 x 0.25mm (4" x 0.010") 205-010 Stainless Steel Kidney Scraper 10cm £0.58 £0.69 x 0.25mm (4" x 0.010") 204-020 Blue Steel Kidney Scraper 13cm £0.47 £0.56 x 0.25mm (5" x 0.010") Leaf Trowel 205-020 Stainless Steel Kidney Scraper 13cm £0.77 £0.92 x 0.25mm (5" x 0.010"") 200-030 Plasterers' Small Tool: Trowel 13mm £4.94 £5.92 200-031 Plasterers' Small Tool: Trowel 19mm £4.94 £5.92 204-030 Blue Steel Toothed Kidney Scraper 10cm £0.47 £0.56 200-032 Plasterers' Small Tool: Trowel 25mm £4.94 £5.92 x 0.25mm (4" x 0.010") 200-033 Plasterers' Small Tool: Leaf 11mm £4.94 £5.92 205-030 Stainless Steel Toothed Kidney Scraper 10cm £1.10 £1.32 200-034 Plasterers' Small Tool: Leaf 16mm £4.94 £5.92 x 0.25mm (4" x 0.010") 200-035 Plasterers' Small Tool: Leaf 25mm £4.94 £5.92

56 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 56 8/7/2018, 8:24 PM STAINLESS STEEL SPATULAS Fine quality flexible stainless steel spatulas. Primarily for use on plaster, but also useful for working on all kinds of modelling, mouldmaking and casting materials.

No.46 (13.5cm)

No.47 (14.5cm)

No.48 (17cm)

No.49 (18.5cm)

No.52 (20cm)

No.54 (23.5cm)

No.85 (27cm)

No.77 (18cm)

No.90 (25cm)

No.92 (20cm)

203-046 No.46 Stainless Steel Leaf Spatula £5.38 £6.45 203-054 No.54 Stainless Steel Leaf Spatula £8.25 £9.90 203-047 No.47 Stainless Steel Leaf Spatula £5.55 £6.66 203-085 No.85 Stainless Steel Leaf Spatula £8.99 £10.78 203-048 No.48 Stainless Steel Leaf Spatula £5.69 £6.82 203-077 No.77 Stainless Steel Double Spatula £7.16 £8.59 203-049 No.49 Stainless Steel Leaf Spatula £6.07 £7.28 203-090 No.90 Stainless Steel Double Spatula £8.36 £10.03 203-052 No.52 Stainless Steel Leaf Spatula £7.43 £8.91 203-092 No.92 Stainless Steel Trowel Spatula £6.91 £8.29

STAINLESS STEEL GRIFFONS Fine quality stainless steel griffons, used for scraping and shaping set plaster.

No.68 (16cm)

No.70 (20.5cm)

No.86 (23.5cm)

203-068 No.68 Stainless Steel Griffon £6.82 £8.18 203-070 No.70 Stainless Steel Griffon £6.82 £8.18 203-086 No.86 Stainless Steel Griffon £6.62 £7.94

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 57

catalogue2018a.p65 57 8/8/2018, 9:05 AM STAINLESS STEEL MODELLING / PLASTER TOOLS Fine quality stainless steel tools. For use on plaster, clay, wax and many other modelling, mouldmaking and casting materials.

No.50 (19cm)

No.56 (19cm)

No.62 (17cm)

No.64 (18cm)

No.66 (18cm)

No.72 (17cm)

No.75 (17.5cm)

No.80 (20.5cm)

203-050 No.50 Stainless Steel Plaster Tool £7.10 £8.52 203-066 No.66 Stainless Steel Plaster Tool £7.72 £9.26 203-056 No.56 Stainless Steel Plaster Tool £7.12 £8.54 203-072 No.72 Stainless Steel Plaster Tool £6.66 £7.99 203-062 No.62 Stainless Steel Plaster Tool £7.26 £8.71 203-075 No.75 Stainless Steel Plaster Tool £6.82 £8.18 203-064 No.64 Stainless Steel Plaster Tool £7.17 £8.60 203-080 No.80 Stainless Steel Plaster Tool £6.15 £7.38

ITALIAN PLASTER TOOLS - OTHERS Finest quality Italian plaster tools, produced primarily for plaster work, but which can be used for a wide range of other materials.

No.88 (25cm)

200-088 No.88 Griffon (Handled) £19.31 £23.17

No.91 (25cm)

200-091 No.91 Plaster Tool (large saw edge spatula) £21.05 £25.26

58 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 58 8/8/2018, 9:08 AM ITALIAN PLASTER TOOLS - SPATULAS Finest quality Italian flexible steel spatulas. Available as double ended spatulas or as leaf spatulas (one spatula end, leaf end comes to a curved point useful for picking out detail or modelling small areas). Primarily used on plaster but have been found useful for working on all kinds of modelling, mouldmaking and casting materials; used extensively in the restoration field by museums, galleries, etc.

No.46 (13.5cm)

No.47 (15cm)

No.48 (17.5cm)

No.49 (18cm)

No.52 (20cm)

No.53 (20.5cm)

No.54 (23cm)

No.84 (24.5cm)

No.85 (25cm)

No.77 (18cm)

No.90 (25cm)

No.92 (20cm)

200-046 No.46 Plaster Tool (leaf spatula) £10.51 £12.61 200-054 No.54 Plaster Tool (leaf spatula) £12.99 £15.58 200-047 No.47 Plaster Tool (leaf spatula) £10.51 £12.61 200-077 No.77 Plaster Tool (double spatula) £11.09 £13.30 200-048 No.48 Plaster Tool (leaf spatula) £12.63 £15.15 200-084 No.84 Plaster Tool (leaf spatula) £14.24 £17.08 200-049 No.49 Plaster Tool (leaf spatula) £10.74 £12.88 200-085 No.85 Plaster Tool (leaf spatula) £13.90 £16.68 200-052 No.52 Plaster Tool (leaf spatula) £11.20 £13.44 200-090 No.90 Plaster Tool (double spatula) £15.48 £18.57 200-053 No.53 Plaster Tool (leaf spatula) £11.30 £13.56 200-092 No.92 Plaster Tool (trowel Spatula) £13.58 £16.29

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 59

catalogue2018a.p65 59 8/8/2018, 9:10 AM NEW SERIES STEEL MODELLING TOOLS A series of general steel modelling tools, offering a good choice of scratch tools and spatulas. Produced mainly for working plaster but can be used with a wide variety of materials.

'A' (20.5cm)

'B' (21cm)

'C' (21cm)

'D' (17cm)

'E' (17cm)

'F' (17cm)

203-001 'A' New Series Steel Tool £7.43 £8.91 203-004 'D' New Series Steel Tool £7.21 £8.65 203-002 'B' New Series Steel Tool £7.57 £9.08 203-005 'E' New Series Steel Tool £7.43 £8.91 203-003 'C' New Series Steel Tool £8.72 £10.46 203-006 'F' New Series Steel Tool £8.11 £9.73

'G' (20cm)

'H' (17cm)

'I' (19cm)

'J' (17cm)

'K' (17cm)

'L' (18cm)

203-007 'G' New Series Steel Tool £7.19 £8.62 203-010 'J' New Series Steel Tool £6.92 £8.30 203-008 'H' New Series Steel Tool £6.10 £7.32 203-011 'K' New Series Steel Tool £5.97 £7.16 203-009 'I' New Series Steel Tool £7.58 £9.09 203-012 'L' New Series Steel Tool £5.88 £7.05

60 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 60 8/8/2018, 9:14 AM NEW SERIES STEEL MODELLING TOOLS

'M' (17cm)

'N' (14cm)

'O' (17cm)

'P' (17cm)

'Q' (17cm)

'R' (17cm)

203-013 'M' New Series Steel Tool £6.61 £7.93 203-016 'P' New Series Steel Tool £5.74 £6.88 203-014 'N' New Series Steel Tool £6.07 £7.28 203-017 'Q' New Series Steel Tool £6.08 £7.29 203-015 'O' New Series Steel Tool £5.89 £7.06 203-018 'R' New Series Steel Tool £5.74 £6.88

SUEDE TOOL ROLLS High quality English suede leather tool rolls. They have a flap which folds over to protect tools and a leather strap and buckle to secure tool roll when rolled up.

Now Brown, 14 Pocket / Medium size has small pockets suitable for modelling tools, The Brown, 12 Pocket / Large size has wider pockets, suitable for woodcarving tools, small stonecarving tools etc. larger stonecarving tools etc.

(tools not included)

300-106 Tool Roll: Brown Suede 14 Pocket / Medium £17.47 £20.96 300-108 Tool Roll: Brown Suede 12 Pocket / Large £36.99 £43.38

TIRANTI TOOL BOX Expanding plastic box to keep various size sculptors’ tools together. It is best to have separate boxes for wood and metal tools. Inside 25mm (1") square; fully closed 17.8cm (7") long, expands up to approximately 30.5cm (12").

203-500 Tiranti Tool Box £1.46 £1.75

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 61

catalogue2018a.p65 61 8/8/2018, 9:16 AM MOULDMAKING

HOT MELT VINYL RUBBER

& ANCILLARIES DPS 40s VINAMOLD

Vinamold is a vinyl based flexible, durable moulding compound, made from polymer- ised PVC resin. It is considered safe to handle provided sensible precautions are taken. We have found Vinamold to be the most durable hot melt compound. DPS 40S to DPS 150S Vinamold is used by melting down and pouring over the original model, and has the (Made to order) ability to be re-melted many times, making it a very economical moulding material. It is used for the casting of a wide variety of materials such as plasters, cements, waxes 402-340 DPS 40S Electric Melting Pot £3,121.20 £3,745.44 and resins. Moulds made from Vinamold need no preparation or release agents since 402-350 DPS 50S Electric Melting Pot £3,397.49 £4,076.98 they are self releasing, though with wood etc. we recommend that you seal it with G4 402-360 DPS 75S Electric Melting Pot £3,716.54 £4,459.84 varnish to stop air bubbles within the mould. Technical Booklet available: Flexible 402-370 DPS 100S Electric Melting Pot £4,047.16 £4,856.59 Moulds with re-usable Hot Melt Vinyl - Gelflex and Vinamold (see booklet 990-502). 402-375 DPS 150S Electric Melting Pot £4,666.78 £5,600.13 Available in three grades: Details of the Range of Melters

Natural Vinamold: Soft Red Vinamold: Soft Yellow Vinamold: Hard Type Capacity dia x depth wattage DPS Litres mm Soft and hard grades may be mixed together to produce intermediate hardnesses. All grades melt at 150ºC - 160ºC and should be poured at 140ºC - 150ºC. 2.5 2.5 150x140 275

1 kg Vinamold = 1 litre 6 6 200x190 600

402-090 Vinamold Soft (Natural) 1 kg £10.57 £12.68 12 12 250x240 1050 402-095 Vinamold Soft (Natural) 5 kg £42.00 £50.40 402-100 Vinamold Soft (Natural) 25 kg £186.30 £223.56 20 20 300x290 1975 4 + less 10% discount £167.67 £201.20 20 + less 15% discount £158.36 £190.02 40s 40 355x280 3000 402-105 Vinamold Soft (Red) 1 kg £10.57 £12.68 402-110 Vinamold Soft (Red) 5 kg £42.00 £50.40 50s 50 406x455 3625 402-115 Vinamold Soft (Red) 25 kg £186.30 £223.56 4 + less 10% discount £167.67 £201.20 75s 75 455x410 5400 20 + less 15% discount £158.36 £190.02 402-120 Vinamold Hard (Yellow) 1 kg £10.57 £12.68 100s 100 510-610 7100 402-125 Vinamold Hard (Yellow) 5 kg £42.00 £50.40 402-130 Vinamold Hard (Yellow) 25 kg £186.30 £223.56 150s 150 560-685 10625 4 + less 10% discount £167.67 £201.20 20 + less 15% discount £158.36 £190.02 THERMOMETER (WAX / GELFLEX) ELECTRIC MELTING POTS Thermometer produced for use with Gelflex or wax. Graduated from -10ºC to 250ºC These pots are used extensively for melting larger quantities of Gelflex, Vinamold, supplied in a plastic case. About 30cm long. waxes, glues, etc. and work in the temperature range of 50ºC to 200ºC.

Pots up to DPS 20 have 2 thermostats, are single phase, 220 - 240 Volts, but can be converted to 110 Volts to order. Constructed from anodised aluminium with ceramic fibre insulation. Supplied with 2 metres of cable, fused plug, lifting handle, on/off switch, 402-200 Thermometer (Wax / Gelflex) £5.77 £6.92 safety thermal cutout and pouring spout, and double wall lid. Stock items. G4 SEALER / VARNISH Pots from DPS 40S are on a stand, have a heated (on a simmerstat) bottom A one component plastic varnish. Use 2-3 coats of G4 Sealer discharge outlet tap, choice of 380 - 415 Volt 3-phase or 220 - 240 Volt single phase. to seal a porous master such as dry clay or dry plaster of Constructed from mild steel, heaters positioned so that the melter may be used to 1/3, Paris prior to pouring hot Gelflex to make a mould. Also use 2/3 and full capacity without overheating contents. Made to order. G4 to seal damp walls, ponds, pools or dusty concrete floors, etc. Harmful 402-300 DPS 2.5 Electric Melting Pot £425.48 £510.57 402-310 DPS 6 Electric Melting Pot £560.08 £672.09 402-320 DPS 12 Electric Melting Pot £716.22 £859.46 402-330 DPS 20 Electric Melting Pot £1,030.35 £1,236.42

402-500 G4 Sealer / Varnish 500g £10.57 £12.68 402-510 G4 Sealer / Varnish 1 kg £17.80 £21.36 JELLY KNIFE Used for cutting flexible moulds, leaving a keyway for proper registration of the two halves. Originally made for cutting Gelatine moulds, but may be used for most flexible DPS 2.5 to DPS 20 mould materials. Not for Sale to anyone under the age of 18.

401-240 Jelly Knife £20.92 £25.10

62 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 62 8/8/2018, 9:25 AM SILICONE RUBBER

Silicone Rubbers cover most mould making requirements; by various combinations of T25 SILICONE RUBBER rubbers, catalysts and Thixo Additive, a wide range of viscosities, strengths, and A medium fast setting RTV silicone rubber. White properties can be obtained. Room Temperature Vulcanising (RTV) Silicone Rubbers in colour, easily pourable and medium soft. (i.e. cold cure) make moulds with working temperatures of - 50ºC to + 250ºC, making Sitting Between T20 and T28 in the range it them suitable for use with a wide range of materials, including plasters, cements, shares the benefits of T20 in flexibility and the polyesters, epoxies, urethanes, waxes, etc. and RTV-101 is a firm rubber going to ability for sharp detail and stability of T28. It can 316ºC, making it ideal for use with tin alloys and pewter (both hand casting and with be used for making block moulds or skin moulds the Centricast Machine - see later section). where undercuts are present. T25 is suitable for the casting of plaster, ciment fondu, waxes, RTV-101 SILICONE RUBBER polyester, polyurethane and epoxy resins. it A red pourable rubber. This rubber is primarily has a shore hardness of 25. used for the casting of low melt alloys, both centrifugally and by hand, or where a very firm Harmful mould is required. RTV-101 is used in the Centricast system for casting military figures, 403-650 T25 Silicone Rubber + T25 Catalyst 1.040 kg kit £21.73 £26.07 jewellery, model parts and dolls house 403-651 T25 Silicone Rubber + T25 Catalyst 5.200 kg kit £85.70 £102.84 accessories, centrifugally in lead/tin alloys or 403-653 T25 Silicone Rubber + T25 Cat. 25.800 kg kit £291.38 £349.65 pewter. It can also be used for casting resins, waxes, plaster, etc. RTV-101 has a Shore A hardness of 55, retaining its elastomeric SILCOSET 152 properties up to 260ºC continuously, and up to A one part silicone adhesive sealant for repairing silicone rubber moulds, and useful as 316ºC when casting white metals. Cure time Harmful an all round adhesive sealant. 5-6 hours. Supplied complete with CA28 Irritant Catalyst.

403-815 RTV-101 Silicone Rubber + CA28 1 kg kit £23.21 £27.85 403-830 RTV-101 Silicone Rubber + CA28 5 kg kit £103.79 £124.54 4 + less 10% discount £93.41 £112.09 10 + less 15% discount £88.22 £105.86

SE-2005 SILICONE RUBBER A white, very free flowing RTV silicone rubber, easy to use; cures to a firm (but low strength) rubber and is ideal where there is only slight undercut. It is also suitable for 403-605 Silcoset 152 Adhesive 75ml £5.73 £6.87 hand casting in tin alloys in modelling and jewellery applications. Similar to RTV-11. Uses 0.25% - 1% catalyst. Due to its Shore A hardness, can be used for making model tyres etc. Typical values are: Cure time about 24 hours (but allow up to 48 hours PUTTY SILICONE for sections thicker than 10mm). Pot Life about 60 minutes, Shore A hardness 40, A two component room temperature Shrinkage about 0.5%, Specific Gravity 1.2. condensation curing silicone compound. The Harmful product is a pasty mass that, once cured, has an elastomeric consistence with good 403-720 SE-2005 Silicone Rubber + CA28 1.01 kg kit £22.01 £26.41 mechanical properties and good dimensional steadiness. Putty Silicone is suitable for vertical T20 SILICONE RUBBER mouldmaking of large dimensional objects or A very high strength RTV silicone rubber. Pale for taking impressions of irremovable objects. grey in colour, easily pourable and medium In particular, the product has been used in soft. It can be used for making block moulds or civic and artistic monumental restoration, in skin moulds where large undercuts are present. artistic foundry work and for production of large T20 is suitable for the casting of plasters, ciment items in gypsum, concrete and resins. Use fondu, waxes, polyester, polyurethane and between 5% & 10% catalyst. 5% catalyst epoxy resins. Shore A hardness is 16. Supplied will give a pot life of about 15 minutes and cure as a kit complete with T6 catalyst to effect the time of 60-70 minutes. More catalyst will give Flammable standard pourable cure. Cure time is 24 hours. shorter pot life and faster cure times. Additional catalyst available. For a faster cure time use with T5 Catalyst. Harmful 403-240 RTV Putty Silicone + Catalyst 1.1kg kit £26.86 £32.23 403-859 T20 Silicone Rubber + T6 Catalyst 1.05 kg kit £22.08 £26.49 403-862 T20 Silicone Rubber + T6 Catalyst 5.25 kg kit £94.13 £112.95 FOOD SAFE MM-730 SILICONE RUBBER 403-863 T20 Silicone Rubber + T6 Catalyst 21 kg kit £282.22 £338.66 A flexible off-white addition cured silicone rubber suitable for a variety of applications T28 SILICONE RUBBER including food applications, Shrinkage A high strength RTV silicone rubber. Pale grey 0.08%, pot life at 23ºC approx. 60 minutes, in colour, pourable and slightly firmer than T20. de- mould 4 hours, max cure time 24hours, It can be used for making block moulds or skin shore A:30. moulds where large undercuts are present. T28 FDA compliance - The fully cured rubber is suitable for the casting of plasters, ciment satisfies the requirements of CFR21, fondu, waxes, polyester, polyurethane and 175.300 and 177.2600, sub paragraphs (e) epoxy resins. Shore A hardness is 25. Supplied and (f) for applications involving both as a kit complete with catalyst to effect the aqueous and fatty foods. standard pourable cure. Cure time 24 hours. Additional T6 catalyst is available. For a faster cure time use with T5 Catalyst. Harmful 403-261 MM-730 Silicone Rubber "Food Safe"1.1kg kit £40.27 £48.32 403-867 T28 Silicone Rubber + T6 Catalyst 1.05 kg kit £22.08 £26.49 403-870 T28 Silicone Rubber + T6 Catalyst 5.25 kg kit £94.13 £112.95 403-871 T28 Silicone Rubber + T6 Cat. 21 kg kit £282.22 £338.66

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 63

catalogue2018a.p65 63 8/8/2018, 9:30 AM T40 SILICONE RUBBER (FAST) T6 CATALYST A thick, fast setting, two-part, addition cured silicone with a variety of mouldmaking The standard catalyst for both T20 and T28 RTV applications. Its non-slump consistency allows moulds to be taken from vertical sur- silicone rubbers. It is used in the ratio of 20 : 1 (5%), faces and irremovable objects. Suitable for casting resins, waxes, plasters and ciment giving a pot life of 100 minutes, cure 24 hours (times fondu. May be thinned with silicone fluid. Mixed in equal parts by weight (A+B) until a are a guide only and will depend on conditions). uniform colour is achieved. Pot life at 20ºC approx. 90-120 seconds, de-mould 8-10 Packs of the Rubber are supplied with the cor- minutes, shore A: 40. Pale pink in colour. rect amount of rubber to catalyst to give, in both cases, a pourable rubber. Catalyst is clear / Lifecasting - Tests have shown this translucent in colour. silicone is suitable for taking moulds from Harmful life, allowing casts to be made in a wider range of materials than those taken from alginates. *Special Note - When used for 403-875 T6 Catalyst 50g £5.32 £6.38 lifecasting applications the use of a bar- 403-878 T6 Catalyst 250g £7.75 £9.30 rier cream is strongly recommended 403-897 T6 Catalyst 1kg £26.17 £31.40 and silicone should not come into contact with eyes, mouth etc. T5 FAST CATALYST 403-745 T40 Silicone Rubber (fast) 2kg kit £56.10 £67.32 A fast catalyst for use with T20 and T28 RTV silicone rubbers. Red in colour and used in the ratio of 20:1 (5%), giving a pot life of 15minutes and a cure time ADDITION CURE 13 of 2-2½ hours (timings are a guide only and will A very soft translucent white, dimensionaly depend on conditions). Shake well before use and stable, two part addition cured silicone rubber mix until a uniform colour is achieved with good mechanical resistance. Suitable for a variety of applications where precision in Harmful reproduction is required. Recommended for casting polyester/polyurethane resins with improved surface reproduction when casting in clear resin. Shore A hardness 13, pot life of 45 minutes, cure time 4 hours. Supplied as a 1kg 403-912 T5 Fast Catalyst 50g £7.12 £8.54 kit (A+B), mixing ratio 1:1 by weight. 403-913 T5 Fast Catalyst 250g £14.24 £17.08 403-914 T5 Fast Catalyst 1kg £32.62 £39.14 403-732 Addition Cure 13 Silicone Rubber 1kg kit £26.63 £31.95

THIXO ADDITIVE ADDITION CURE 33 Thixotropic additive for T20 and T28 silicone rubbers. For making skin moulds or A medium firm translucent white reduced moulding immovable vertical objects. Thixo additive is used as a third component, and viscosity, two part addition cured silicone ideal it changes the catalysed rubber from flowable to non-slump (not a paste). Use 0.5% to for small scale or detailed castings where high 2% of Thixo Additive to weight of rubber. We have found a 2% addition gives an levels of surface accuracy are required. High excellent brushing rubber which does not trap air but remains non-slump. A second resistance to aggresive components of some layer, if required, should be added whilst the first is tacky. Thixo Additive will shorten the resin types, and good resistance to temperature available pot life. Test before use. makes this silicone particularly suitable for casting polyester/polyurethane resins, with improved surface reproduction when casting in clear resins. Shore A hardness 33, pot life 20mins, cure time 3 hours.Supplied as a 1kg kit (A+B), mixing ratio 1:1 by weight.

403-734 Addition Cure 33 Silicone Rubber 1kg kit £26.71 £32.05

ADDITION CURE THIXO AGENT 403-888 Thixo Additive 50g £5.92 £7.10 Thixotropic additive for Addition Cure 13 & 33 silicone rubbers, Used in a ratio of 1% 403-892 Thixo Additive 500g £36.48 £43.77 (by weight) into each silicone component separately before mixing the components 4 + less 10% discount £32.83 £39.40 together. Turns Addition Cure 13 & 33 from a pourable to non-slump silicone that can be 10 + less 15% discount £31.01 £37.21 brushed onto vertical or immovable objects, allowing a thickness up to 5mm to be applied in one application. Addiitonal layers should be added whilst the first is still tacky. NOTE - this thixo agent is designed for exclusive use with Addition Cure 13 and FORMULA 5 RELEASE AGENT Addition Cure 33 silicone rubbers. Spray wax release agent in aerosol form, used to stop silicone rubber sticking to 403-738 Addition Cure Thixo Agent 50g £6.17 £7.40 itself when making moulds in more than 403-741 Addition Cure Thixo Agent 250g £16.44 £19.72 one piece. Replaces DP 100. Some of the known inhibiters of addition cure silicones: Wood mastic, Epoxy resin, Flexible compact PUR, Cyanoacrylate adhesives, Neo- Extremely Flammable prene adhesive, Transparent wood glue, Polyester resin, Shellac, Vinyl adhesive, Silicone sealants, Condensation cure silicones, CAF (all types).

SILICONE FLUID Silicone fluid for thinning down silicone rubber. Normally up to 5% may be added to the rubbers to reduce viscosity without having any effect on the properties of the rubber; after that, properties such as tear strength will start to be affected. A maximum of 10% 403-902 Formula 5 Release Agent 400ml can £9.08 £10.89 12 + less 10% discount £8.17 £9.80 should not be exceeded. Harmful 403-640 Silicone Fluid 200g £5.47 £6.56

64 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 64 8/8/2018, 9:35 AM POLYURETHANE R UBBER ALGINATE

PU MOULD RUBBER 2340 A replacement for polyurethane mould rubber shoreA440, sharing the same hardness and suitable for a variety of applications. It can be used in conjunction with a suitable release agent for the casting of urethanes, polyesters, epoxy, plasters and concrete. Also good for the casting of industrial parts and special effects, model tyres etc. Now supplied in a 2kg kit, mixing an equal quantity of parts A and B. A pale straw colour, which accepts pigments well. Harmful Pot Life 10 - 15 mins. Cure Time 4hrs.

410-450 PU Mould Rubber 2340 2kg Kit £32.29 £38.74

AMBERSIL PUR400 SILICONE MOULD RELEASE A silicone based spray for the release of polyurethane from polyurethane. It will also ALGINATE - NORMAL SET release polyurethane mould rubber from properly prepared models. It can also help A high quality, dust free Alginate with no flavour. Blue in colour. For taking quick and release of a variety of casting materials, epoxies, urethanes, etc. from cured rubber highly detailed impressions or moulds from almost any material. Being totally safe and moulds. (Do not use as a silicone to silicone release or for releasing polyurethane so fast setting, it is especially suited for taking moulds directly from the skin. In this foams - for these applications use Formula 5 Release Agent.) respect, it is commonly used by sculptors, model makers, make-up artists, in the film Extremely Flammable and television special effects industry for taking body casts, face casts or moulds of hands, feet, noses, etc. Normal Set Alginate is a powder that, when mixed with water (at room temperature), sets in 2-3 minutes. Casts in plaster or wax should be taken 410-502 Ambersil PUR400 Silicone Mould Release 500ml £10.85 £13.02 almost immediately.

404-050 Alginate - Normal Set 500g £9.44 £11.32 10 + less 10% discount £8.50 £10.20 50 + less 15% discount £8.02 £9.62 100+ less 25% discount £7.08 £8.50

ALGINATE - SLOW SET A purpose made, high quality, dust free Alginate with no flavour. White in colour. Most LATEX of the above details for Normal Set Alginate apply, but it is slower setting, giving 3-4 minutes working time and a setting time within 6-8 minutes. Useful for moulds of full LATEX heads or where more time is required to take the mould. Pre-vulcanised liquid latex which is air drying. Makes very economical, strong and durable strip-off moulds for the casting of plasters, cements and waxes. Can also be 404-055 Alginate - Slow Set 500g £9.44 £11.32 used to cast polyester resins on a limited basis. Moulds are made either by dipping, or 10 + less 10% discount £8.50 £10.20 by painting on layers of latex (allowing each layer to dry before proceeding to the next 50 + less 15% discount £8.02 £9.62 layer) onto the original to build to the required thickness. A faster build up of latex when 100+ less 25% discount £7.08 £8.50 painting can be achieved by using Latex Thickener.

ALGINATE BODY MOULDING & CASTING KIT An easy to use kit containing Normal Set Alginate, plaster, plaster bandage and essential mixing utensils. The kit also includes full instructions and enough material to complete one or more of the following moulding projects and then cast in plaster:

A. Making a mould of a hand or foot using alginate B. Making a mould of a face using alginate

The instructions and materials in this kit may be adapted to cast other body parts.

Environmental Hazard

404-100 Liquid Latex 1 kg £10.28 £12.33 404-110 Liquid Latex 5 kg £33.52 £40.22 404-120 Liquid Latex 25 kg £139.29 £167.14 5 + less 10% discount £125.36 £150.43

LATEX THICKENER Liquid thickener to make liquid latex into a gel for faster mould build up. Use about 10% of thickener (weight or volume) which makes an excellent brushing mix, which is non- slump and with careful brushing will avoid air entrapment. Four layers makes a substantial mould for a mask 30cm x 20cm (12" x 8"). Estimate at 100g per litre of Latex. 404-060 Alginate Body Moulding & Casting Kit £18.03 £21.63

404-180 Latex Thickener 100g £2.22 £2.66 404-185 Latex Thickener 500g £5.69 £6.82 404-187 Latex Thickener 1 kg £8.48 £10.17 404-188 Latex Thickener 5 kg £22.70 £27.24

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 65

catalogue2018a.p65 65 8/8/2018, 9:53 AM CASTING

PLASTER PLASTER POLYMER Acrylic Plaster Hardener for use with an Alpha Hemi Hydrate plaster such as Basic PRESTIA CASTING PLASTER Alpha, it will produce an extremely hard (much harder than even the hardest casting A fast setting general purpose plaster, used for making moulds or casting of articles plasters) casting or modelling material. Has been used to replace polyester resins for where hardness of setting is not important. Also useful for carving or direct modelling. casting due to there being little or no harmful solvents or odour present when using this Setting time is 14-32 minutes. Plaster to water ratio 1.30kg / litre. Compressive strength material. Use for casting, coating or laminating applications (with glass fibre), by hand (dry) 1691 psi. or spraying for sculpture castings, props / modelmaking, theatrical and scenic dis- plays. Can be coloured using earth colours/pigments or any water based pigment. 400-380 Prestia Casting Plaster 25 kg £9.79 £11.74 Also used with stone fillers, sand or aggregates to reproduce many realistic natural 10 + less 10% discount £8.81 £10.57 effects. Basic mix is 3 parts plaster to one part polymer by weight, before adding other 30 + less 25% discount £7.34 £8.81 items. Can be thinned with water. 400-745 Plaster Polymer 1 kg £8.87 £10.64 400-750 Plaster Polymer 5 kg £33.46 £40.15 PRESTIA CLASSIC 400-755 Plaster Polymer 25 kg £145.93 £175.11 A fast setting Dental plaster of the finest quality. Suitable for making moulds, carving, 5 + less 5% discount £138.63 £166.36 direct modelling or casting. Setting time 8-19 minutes. Plaster to water ratio 1.45kg / litre. 10 + less 10% discount £131.34 £157.60 Compressive strength (dry) 2131 psi.

400-395 Prestia Classic Plaster 1.5 kg £2.97 £3.56 400-400 Prestia Classic Plaster 4 kg £4.96 £5.95 TRI-SODIUM CITRATE 400-405 Prestia Classic Plaster 25kg £12.63 £15.15 Tri-Sodium Citrate is used as a retarder for plasters, whether used with polymer or 10 + less 10% discount £11.37 £13.64 water. Retards to about 60 minutes. The granules should be dissolved in water in the 30 + less 25% discount £9.47 £11.37 ratio 1 part Tri-sodium Citrate to 10 parts clean water by weight. This mix should be used 1% - 3% by weight to plaster when using water, and 1% by weight to plaster when using Plaster Polymer.

BASIC ALPHA PLASTER 400-900 Tri-Sodium Citrate 250g £4.39 £5.26 Top class casting plaster which is very fine, hard and strong. Used for the casting of finished pieces where a hard durable surface is important. Setting time 9-20 minutes. Plaster to water ratio 2.8kg / litre. Compressive strength (dry) 7054 psi. This plaster is SOFT SOAP also used for castings made with Plaster Polymer for extremely hard and high weather Mouldmaker's soft soap. For plaster moulds when casting plaster. Dissolve some of resistant applications. the soap in water to thin it down and then brush on at least two coats. When completed, the surface should feel slightly greasy to the touch. If the plaster mould becomes dry 400-550 Basic Alpha Plaster 5 kg £7.45 £8.94 before applying soft soap, soak the plaster first. 400-555 Basic Alpha Plaster 25 kg £19.16 £22.99 10 + less 10% discount £17.24 £20.69 401-155 Soft Soap 500g £4.74 £5.68 30 + less 25% discount £14.37 £17.24

CERAM N1 PLASTERERS' SCRIM Specially developed for tableware applications. This plaster offers excellent wear Open weave hessian scrims for reinforcing plaster moulds, casts, etc. Available in two resistance properties due to its alpha based formulation, specifically for casting moulds grades - medium and coarse. Coarse scrim is also available in 7.6cm x 100 metre for porcelain and pottery. It is also suitable for jigger and roller head machine moulds. rolls. setting time: 20-30 minutes. Plaster to water ratio is 1.6kg / litre

400-570 Ceram N1 5kg £5.89 £7.06 400-578 Ceram N1 25 kg £12.39 £14.86 10 + less 10% discount £11.15 £13.38

MODELL PLASTER Our hardest casting plaster. Produces castings that are very finely detailed and very hard. Setting time 12-16 minutes. Plaster to water ratio 3.57kg / litre. Compressive strength (dry) 9000 psi. 401-400 Medium Scrim 183cm x 1 metre £2.19 £2.62 401-410 Medium Scrim 183cm x 10 metres £13.11 £15.73 400-600 Modell Plaster 5 kg £9.54 £11.44 401-420 Medium Scrim 183cm x 46 metres £41.41 £48.72 400-610 Modell Plaster 25 kg £28.20 £33.84 401-450 Coarse Scrim 97cm x 1 metre £1.36 £1.63 10 + less 10% discount £25.38 £30.46 401-460 Coarse Scrim 97cm x 10 metres £5.02 £6.02 30 + less 25% discount £21.25 £25.38 401-470 Coarse Scrim 97cm x 200 metres £62.03 £74.43 401-500 Coarse Scrim 7.6cm x 100 metres £4.43 £5.31 10 + less 10% discount £3.99 £4.78 TERRACOTTA CAST WITH IRON Extremely hard terracotta coloured casting material which contains iron. This is our own formulation and is made by us in house. The cast material has unique casting BRASS FENCING properties; it resembles fired terracotta, and cast pieces that are allowed to get wet will For cutting into shims for metal fencing when eventually begin to turn rusty. Cast material does not produce any salting which used mouldmaking. Available in 2.5 metre rolls or to be associated with a similar product we stocked a few years ago. Supplied for indoor sold by weight (minimum of 1 kg), where you applications only; however pieces kept outdoors have shown great resistance to will be charged for the exact weight supplied. extremes of climatic conditions. If making hollow casts by swilling, subsequent swills Size 165mm (6½") wide x 0.1mm (0.004") should be made when the previous one is hard but not dry. Hollow casts made from thick. 1 kg of brass fencing is about 7.6 metres swills need to be about 13mm (½") thick if no reinforcement is to be used. (25 feet) long.

400-320 Terracotta Cast with Iron 2.5 kg £9.81 £11.77 400-330 Terracotta Cast with Iron 25 kg £72.44 £86.92 401-300 Brass Fencing 165mm x 0.1mm (per kg) £22.22 £26.66 4 + less 10% discount £65.20 £78.23 401-305 Brass Fencing 165mm x 0.1mm x 2.5 metres £7.46 £8.95 10 + less 15% discount £61.57 £78.89

66 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 66 8/8/2018, 10:31 AM PLASTER RASPS CIMENT FONDU Ideal for working plaster and cleaning up large surfaces. They are designed not to clog up with plaster. Surform tools will also perform a similar function. CIMENT FONDU Specially fine high alumina casting cement giving superb detail. This cement is fast setting, achieving its full strength in 24 hours. It is extremely hard and is good for outdoor applications. Colour black/ brown. Technical Booklet available Casting in Ciment Fondu by Edward Folkard FRBS. The author taught at the Royal College of Art for some years. Contains 21 pages with 14 illustrations.

401-550 Plaster Rasp 18cm (7") £8.09 £9.70 401-700 Ciment Fondu 2.5 kg £5.19 £6.22 401-560 Plaster Rasp 20cm (8") £8.09 £9.70 401-710 Ciment Fondu 25 kg £24.02 £28.82 401-570 Plaster Rasp 25cm (10") £9.30 £11.16 10 + less 10% discount £21.62 £25.93 401-580 Plaster Rasp 30cm (12") £11.28 £13.53 401-585 Steel Plaster Rasp 20cm (8") £3.75 £4.50 SECAR 71 Specially fine high alumina casting cement giving superb detail. It is fast setting, PLASTER KNIVES achieving its full strength in 24 hours. It is extremely hard and is good for outdoor Ideal plaster working knives, with a straight cutting edge, a very thick strong back and applications. Colour white. Technical Booklet available Casting in Ciment Fondu by a polished handle. Not for sale to anyone under the age of 18. Available in two Edward Folkard FRBS. sizes. 401-750 Secar 71 White Ciment Fondu 2.5 kg £8.22 £9.86 401-760 Secar 71 White Ciment Fondu 25 kg £49.45 £59.34 10 + less 10% discount £44.50 £53.41

401-200 Plaster Knife 10cm (4") £15.49 £18.58 POLYESTER RESIN 401-210 Plaster Knife 15cm (6") £19.79 £23.74

ALABASTER KNIFE Alabaster / Plaster knife with a 10cm (4") double curved blade. Not for sale to anyone under the age of 18.

401-230 Alabaster Knife (curved) 10cm (4") £19.79 £23.74 CLEAR CASTING RESIN Is a water-white, clear casting resin giving extreme clarity and absence of colour. PLASTER BOWLS Properly cured castings have the same refractive index as glass. Suggested applications Very soft, flexible, 'rubber' bowls for mixing and pouring plaster. It is possible to include decorative castings, table tops, objets d’art, embedding and encapsulation. squeeze these right up to make a narrow pouring mouth. Due to the flexible nature of Clear Casting Resin AM is orthophthalic, has low viscosity, low reactivity and low these bowls, set plaster is easily removed (except when using plaster polymer, when shrinkage. It is set up to cure at room temperature. The resin is modified with methyl the plaster should be cleaned out before it sets). methacrylate to enhance weather resistance. Uncatalysed resin is aqua blue in colour, but this clears to water-white when cured. Harmful

405-210 Clear Casting Resin AM 1 kg £12.94 £15.52 405-230 Clear Casting Resin AM 5 kg £48.76 £58.51 405-240 Clear Casting Resin AM 20 kg £142.80 £171.36 2 + less 5% discount £135.66 £162.79 4 + less 10% discount £128.52 £154.22 10 + less 15% discount £121.38 £145.66

G P RESIN General Purpose, pre-accelerated, low viscosity, thixotropic, orthophthalic resin, 401-010 Plaster Bowl - Small (¼ litre) £4.14 £4.96 formulated to give extremely low styrene emission. Its applications include laminating, 401-020 Plaster Bowl - Medium (¾ litre) £5.62 £6.74 casting and casting with metal and stone fillers. 401-030 Plaster Bowl - Large (2 litre) £8.27 £9.92 Harmful Characteristics: • Very low styrene emission resulting in lower styrene levels in workshop PLASTER BRUSHES atmospheres. Plaster brushes with domed ends for working with plaster and soft soap. • Good interlaminar adhesion ensuring no de-lamination if lay up is delayed. • Low viscosity allowing rapid, efficient fibre wet-out in spray and hand lay-up. • Long pot life combined with rapid cure allowing fast mould turn round. The quick curing characteristic gives a relatively short green trimming stage. • Lower exotherm enabling thick sections to be fabricated with much reduced risk of distortion, discolouration, pre-release, or damage to mould surface. • Approved Lloyds Register of Shipping for use in the construction of boats moulded under their survey. • Mechanical properties meet requirements of BS.3532 1962, Type A

405-505 GP Resin 1 kg £9.34 £11.20 405-520 GP Resin 5 kg £34.48 £41.37 405-530 GP Resin 20 kg £92.42 £110.90 401-080 Plaster Brush - Small 9mm (3/8") £1.48 £1.77 2 + less 5% discount £87.80 £105.36 401-082 Plaster Brush - Medium 12mm (1/2") £1.91 £2.29 4 + less 10% discount £83.18 £99.81 401-084 Plaster Brush - Large 15mm (5/8") £3.35 £4.02 10 + less 15% discount £78.56 £94.27

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 67

catalogue2018a.p65 67 8/8/2018, 10:38 AM MULTI-PURPOSE RESIN Very similar resin to the G P, but gives slightly less shrinkage, and takes the lighter colours better (e.g. white). Harmful

405-615 Multi-Purpose Resin 1 kg £8.94 £10.72 407-100 Polyester Pigment: Ivory 100g £5.46 £6.55 405-630 Multi-Purpose Resin 5 kg £32.48 £38.97 407-110 Polyester Pigment: Ivory 500g £13.60 £16.32 405-640 Multi-Purpose Resin 25 kg £85.68 £102.81 407-190 Polyester Pigment: Super Black 100g £5.00 £6.00 2 + less 5% discount £81.40 £97.68 407-200 Polyester Pigment: Super Black 500g £11.53 £13.83 4 + less 10% discount £77.11 £92.53 407-220 Polyester Pigment: Super White 100g £5.07 £6.08 10 + less 15% discount £72.83 £87.40 407-230 Polyester Pigment: Super White 500g £11.80 £14.23 406-085 Polyester Pigment: Bright Red 100g £11.61 £13.93 GEL COAT RESIN 406-086 Polyester Pigment: Bright Red 500g £42.45 £50.94 A pre-accelerated, isophthalic clear gel coat resin which is 20% thixotropic. The resin 406-095 Polyester Pigment: Chocolate Brown 100g £5.03 £6.03 brushes out nicely and leaves a good thickness of gel coat prior to laminating with glass 406-096 Polyester Pigment: Chocolate Brown 500g £12.09 £14.50 fibre and GP Resin. It also has excellent weather resistance. It is not suitable for mixing 406-100 Polyester Pigment: Sulphur Yellow 100g £6.98 £8.37 with metal fillers. 406-101 Polyester Pigment: Sulphur Yellow 500g £21.66 £25.99 Harmful 406-105 Polyester Pigments: Yellow 100g £9.84 £11.80 406-106 Polyester Pigments: Yellow 500g £34.53 £41.43 405-545 Gel Coat Resin 1 kg £10.51 £12.61 406-111 Polyester Pigment: Bright Green 100g £8.31 £9.97 405-560 Gel Coat Resin 5 kg £45.72 £54.86 406-112 Polyester Pigment: Bright Green 500g £27.24 £32.68 405-570 Gel Coat Resin 20 kg £136.46 £163.75 406-115 Polyester Pigment: Green 100g £8.29 £9.94 2 + less 5% discount £129.64 £155.56 406-116 Polyester Pigment: Green 500g £27.18 £32.61 4 + less 10% discount £122.81 £147.38 407-285 Polyester Pigment: Dark Green 100g £5.87 £7.04 10 + less 15% discount £115.99 £139.19 407-290 Polyester Pigment: Dark Green 500g £15.43 £18.51 406-121 Polyester Pigment: Pastel Blue 100g £5.39 £6.46 LIQUID HARDENER 406-122 Polyester Pigment: Pastel Blue 500g £13.90 £16.68 Catalyst for use with all our polyester resins. Liquid Hardener is an Organic Peroxide 406-125 Polyester Pigment: Blue 100g £5.27 £6.32 called Methyl Ethyl Ketone Peroxide. It cannot be sent by post, but only by road 406-126 Polyester Pigment: Blue 500g £13.37 £16.04 carrier. The small Hardener bottles have dropper fittings in the neck and calibrations on 407-300 Polyester Pigment: Bright Blue 100g £5.65 £6.78 the sides, so that it is possible to measure small or large amounts. For larger amounts, 407-305 Polyester Pigment: Bright Blue 500g £14.54 £17.44 use the Auto-dispenser. 406-131 Polyester Pigment: Turquoise Blue 100g £5.37 £6.44 Oxidising Corrosive 406-132 Polyester Pigment: Turquoise Blue 500g £13.58 £16.29 406-135 Polyester Pigment: Claret 100g £9.24 £11.08 405-810 Liquid Hardener 50g £2.06 £2.47 406-136 Polyester Pigment: Claret 500g £31.59 £37.90 405-820 Liquid Hardener 500g £6.01 £7.21

PARTING AGENTS POLYESTER PIGMENTS - TRANSLUCENT Parting agents or release agents are essential when casting or laminating with resin A series of translucent pigments for use with polyester resin. Ideal for colouring Clear except where a rubber mould such as silicone, latex or Gelflex is used. If in doubt as Casting Resin and also for producing semi-translucent castings when used in conjunc- to which release agent or combination to use for your particular application, please tion with Synthetic Onyx Filler. Normal addition to polyester is 2 - 5%. consult our Polyester Resin Technical Booklet or ask our technical department for (Colours shown are an indication only.) advice. Flammable

407-310 Translucent Polyester Pigment: Blue 50g £3.08 £3.69 407-330 Translucent Polyester Pigment: Red 50g £3.15 £3.78 407-350 Translucent Polyester Pigment: Green 50g £3.01 £3.61 407-370 Translucent Polyester Pigment: Amber 50g £3.51 £4.21 407-390 Translucent Polyester Pigment: Yellow 50g £3.04 £3.64

Wax Parting Agent GP & PVA Blue & Clear: GLASS FIBRE Glass fibre is used in conjunction with resin either to provide reinforcement to the 407-610 Scopas Parting Agent 250ml £2.87 £3.44 casting or to produce a more lightweight casting where weight would be a problem if a 407-620 Scopas Parting Agent 1 Litre £8.39 £10.06 solid cast were to be made. Usually a gel coat, made of resin or resin and filler, is applied into a mould and then glass fibre is laminated in layers behind this using 407-650 Wax Parting Agent GP 300g £6.77 £8.12 GP polyester resin. This produces a very strong durable lightweight resin shell. Glass 407-710 PVA Blue 250g £3.59 £4.30 fibre can also be used in conjunction with plaster polymer mixes to make more 407-720 PVA Blue 4.5 kg £27.54 £33.04 lightweight, very strong structures. 407-730 PVA Clear 250g £3.24 £3.88 407-740 PVA Clear 4.5 kg £21.70 £26.04 406-010 Light Chopped Strand Mat 1 metre £2.50 £3.00 406-020 Light Chopped Strand Mat 10 metres £19.99 £23.98 406-030 Light Chopped Strand Mat 25 metres £32.25 £38.70 POLYESTER PIGMENTS - OPAQUE These colour pastes contain highly dispersed pigments and can be readily mixed 406-110 Heavy Chopped Strand Mat 1 metre £2.95 £3.54 directly into the resin. They have been specially selected by us and they are all lead 406-120 Heavy Chopped Strand Mat 10 metres £26.16 £31.39 free. They all have good opacity, are heat and light stable and all are compatible with 406-130 Heavy Chopped Strand Mat 25 metres £47.36 £56.83 our polyester resins. The colour paste should first be mixed with a small quantity of resin and, while continually stirring, gradually add the rest of the resin. Greater opacity 406-210 Glass Fibre Tissue 1 metre £2.74 £3.28 can be obtained by mixing the resin with a filler such as marble. Black Pigment will 406-220 Glass Fibre Tissue 10 metres £18.58 £22.29 absorb the cobalt accelerator present in the resin. Therefore, when mixed with resin, it 406-230 Glass Fibre Tissue 25 metres £42.71 £51.25 should be used within 24 hours to avoid cobalt absorption and so prevent undercure. The pigments are highly concentrated and additions of only 2 - 5% are required. If these 406-320 Glass Fibre Ribbon 50mm x 5 metres £2.53 £3.03 levels are exceeded it may result in an undercured or sticky casting. 406-330 Glass Fibre Ribbon 50mm x 50 metres £15.25 £18.30 (Colours shown are an indication only.) 406-410 Chopped Strands 500g £3.11 £3.73

68 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 68 8/8/2018, 11:31 AM METAL FILLERS GENERAL FILLERS

A series of fine metal powders (200-325 mesh) specially for use with resins in the Cold Finely powdered stone fillers for polyester resin. Please note that we cannot guarantee Cast Resin Metal Process originally developed by Alec Tiranti Ltd in the late fifties. The colours, and that enough should be in hand of the same shade for the whole job in hand. powders are pure metals, not colours, and are unsuitable for painting. Please note that we cannot guarantee colours, and that enough should be in hand of the same shade for Fillers are used for a variety of reasons: for effect, as with metal fillers, slate or synthetic the whole job in hand. onyx; to improve opacity when using pigments; or to bulk out the resin for economy and to reduce heat (exotherm) when casting large solid pieces. Other useful properties, The metal powder is mixed with GP or Multi-Purpose Resin, and hardener. This such as improved hardness, scratch resistance and thixotropic qualities, can also be mixture is then painted into the mould as a first layer or gel coat. It is then either filled achieved by adding fillers. solid with resin and filler or laminated with glass fibre. When polished to reveal the metal, the castings are almost identical in appearance to a cast piece in the chosen metal. The metal content of the metal / resin mix should be as high as possible; too little metal filler is as bad as none at all.

Quantities of fillers: In general, a rule of thumb is equal parts by volume plus a little more filler (based on GP or Multi-Purpose resin at room temperature). A guide to weight ratios of metal fillers to one part of Multi-Purpose resin is:

Aluminium 1¼ Bronze 6 or 7 Copper 4 or 5 Brass 5 or 6 Iron 6 or 7

Brass Bronze

starting top left in clockwise direction: Slate, Fillite, Marble Powder, Coarse Marble, Synthetic Onyx Copper SYNTHETIC ONYX FILLER Aluminium Aluminium hydroxide; a white filler giving excellent translucent qualities similar to onyx and some marbles. Can be used with pigments.

408-040 Synthetic Onyx Filler 500g £2.31 £2.77 408-050 Synthetic Onyx Filler 2.5 kg £8.61 £10.33 ALUMINIUM FILLER 408-060 Synthetic Onyx Filler 50lb (approx. 22kg) £45.60 £54.72 Aluminium metal filler -250 mesh to dust. 10 + less 10% discount £41.04 £49.25

408-310 Aluminium Filler 500g £6.84 £8.20 408-320 Aluminium Filler 2.5 kg £26.11 £31.33 MARBLE FILLER 408-330 Aluminium Filler 25 kg £210.56 £252.67 100 mesh white marble filler powder (technically calcium carbonate - CaC02). 150 microns is the largest particle size, but 50% gets through 100 mesh. Gives better BRONZE FILLER opacity with resins when using pigments and also cheapens the mix when casting Bronze metal filler 325 mesh. solid. Environmental Hazard 408-340 Bronze Filler 500g £12.26 £14.71 408-070 Marble Filler 2.5 kg £3.91 £4.69 408-345 Bronze Filler 2 kg £44.60 £53.52 408-075 Marble Filler 25 kg £16.27 £19.52 408-350 Bronze Filler 5 kg £102.88 £123.45 10 + less 10% discount £14.64 £17.57 408-360 Bronze Filler 25 kg £449.45 £539.34 408-370 Bronze Filler 50 kg £859.61 £1,031.53 MARBLE FILLER - COARSE BRASS FILLER A coarser marble powder which brings a glint or sparkle to castings, sometimes seen Brass metal filler 240 mesh. in carved pieces of marble. To be mixed with other fillers such as Synthetic Onyx and Environmental Hazard 100 mesh Marble Filler. Can also be used with cement based castings. 408-420 Brass Filler 500g £11.12 £13.34 408-425 Brass Filler 2 kg £41.14 £49.36 408-077 Marble Filler Coarse 2.5 kg £3.95 £4.74 408-430 Brass Filler 5 kg £94.55 £113.46 408-079 Marble Filler Coarse 25 kg £16.92 £20.30 408-440 Brass Filler 25 kg £403.01 £483.61 10 + less 10% discount £15.23 £18.27 408-450 Brass Filler 50 kg £770.27 £924.32

COPPER FILLER SLATE FILLER Copper metal filler 325 mesh. Environmental Hazard Finely powdered slate. Correctly used it is possible to obtain a beautiful slate finish. Also makes a good inexpensive general purpose filler. 408-460 Copper Filler 500g £11.07 £13.28 408-465 Copper Filler 2 kg £40.22 £48.26 408-170 Slate Filler 2.5 kg £4.35 £5.22 408-470 Copper Filler 5 kg £92.35 £110.82 408-180 Slate Filler 25 kg £19.70 £23.64 408-480 Copper Filler 25 kg £400.11 £480.13 10 + less 10% discount £17.73 £21.28 408-490 Copper Filler 50 kg £764.65 £917.58 FILLITE IRON WEIGHTING FILLER A very lightweight filler, grey in colour. For use in polyester resins etc. Has good flow Iron Weighting filler in fine powder form. properties, but in very high loadings will increase the viscosity of the resin. 408-500 Iron Weighting Filler 5 kg £11.89 £14.26 408-061 Fillite 1 kg £5.26 £6.31 408-510 Iron Weighting Filler 25 kg £43.11 £51.73 408-063 Fillite 20 kg £55.64 £66.76 10 + less 10% discount £38.80 £46.56

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 69

catalogue2018a.p65 69 8/8/2018, 11:39 AM POLYURETHANE RESIN RIGID POLYURETHANE FOAM A high quality two component rigid poly- G 26 BIRESIN URETHANE RESIN urethane foam that is versatile and easy to Polyurethane Fast Casting Resin. Used use. Its applications inlcude arts / crafts, for the casting of model kits, figures, foundry industrial and special effects. It can be used tooling and pattern making. Will cast even as a strait casting material, backfill material the smallest pieces. Very fluid, with an easy for hollow castings (adds structural strength), mixing ratio (1 : 1) and very quick setting, or as an encapsulation material, etc. Parts A producing castings which are highly detailed & B are mixed in equal parts by weight and and less brittle than those made of polyester poured into a mould or other form (apply resin. For larger castings we recommend release agent if necessary). It will expand to the use of a filler, such as Synthetic Onyx. approximately 8 times its original volume. This resin has a 5 minute pot life and a 30 Foam becomes tack free in about 10 min- minute cure. Supplied in 2 kg packs (1 kg utes and can be de-moulded in 15-45 min- resin and 1 kg hardener). Harmful utes. sold in a 2kg kit (1kg Part A and 1kg Part B). Harmful 409-700 Biresin G26 Urethane Resin 2 kg £38.57 £46.28 5 + less 20% discount £30.86 £37.03 410-048 Rigid Polyurethane Foam 002 2kg £32.20 £38.64

AXSON F160 URETHANE RESIN Polyurethane Fast Casting Resin. For POLYURETHANE PIGMENTS casting small to medium size sculptures, Concentrated pigments for use with our polyurethane resins. Use 0.2% to 0.5% with cold cast bronze, prototype models, special clear polyurethanes. Use 1% to 2% or more with others. effect props, decorative jewellery and model kits, etc. Very quick de-moulding. Low viscosity. Can be filled. Mixing ratio 1:1 by weight. Colour: beige. Shore D 72. Pot life at 25ºC 200g = 2.5 minutes. De-mould 20- 30 minutes. Supplied in 1.8kg packs (900g resin & 900g hardener). Harmful

409-710 Axson F160 Urethane Resin 1.8kg £29.82 £35.78 5 + less 20% discount £23.86 £28.63

AXSON F23 FAST-CAST RESIN A filled fastcast polyurethane resin reccomended for small/medium castings, model kits, figures etc. Excellent flow properties, white in colour. 6 minute Pot life and 30 minute cure time. Harmful 410-520 Polyurethane Pigment: Black 100g £5.09 £6.10 410-521 Polyurethane Pigment: White 100g £6.18 £7.41 410-522 Polyurethane Pigment: Blue 100g £6.23 £7.47 410-523 Polyurethane Pigment: Yellow 100g £7.94 £9.52 410-524 Polyurethane Pigment: Red 100g £8.39 £10.06 410-525 Polyurethane Pigment: Green 100g £5.94 £7.12

409-712 Axson F23 Urethane Resin 1.2kg £18.65 £22.38 OTHER RESINS 5 + less 10% discount £14.92 £17.90 EPOXY RESIN - GLOSSCOAT A general purpose clear epoxy resin for casting, embed- FLEXIBLE POLYURETHANE FOAM ding, cold enamelling and coating. The resin is very A premium two-component soft and flexible slightly straw coloured, but this is virtually unnoticeable foam that is versatile and easy to use. It in coating applications. Epoxy resin cures with a non- can be used for a variety of art / crafts, tacky surface, is self levelling, non-shrinking and will industrial and special effects applications adhere to most surfaces. Polyester pigments may be including padding / cushion material and used with this resin (5% maximum), and also a whole scenic design. Parts A & B are mixed in a range of fillers. two to one ratio by weight and poured into a Harmful Corrosive mould or other form (apply a release agent if necessary). It will expand to 5 to 6 times its original volume. Foam takes 5 minutes to full rise and can be handled in 15 to 20 minutes. Cures white. Sold in a 3kg kit (2kg Part A and 1kg Part B). Harmful

410-043 Self Skinning Flexible Polyurethane Foam 3kg £34.75 £41.70

409-402 Epoxy Resin - Glosscoat (1 kg pack) £33.52 £40.22

70 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 70 8/8/2018, 11:46 AM RESIN SUNDRIES ACETONE LAMINATING BRUSHES Powerful solvent for cleaning G4 and gelling polyester resin from brushes. It is recom- Very inexpensive laminating brushes, mended that the brushes are washed afterwards in hot water and a detergent. with natural coloured bristles and In three sizes. Irritant Highly Flammable unvarnished wooden handles, specially made for use with resins. Do not clean hands or skin with Acetone. In four sizes. 602-600 Acetone 250ml £6.86 £8.23 602-610 Acetone 1litre £15.78 £18.93 602-620 Acetone 5 litre £35.84 £43.00

406-700 Laminating Brush 12mm (½") £0.61 £0.73 OTHER RESIN SUNDRIES 10 + less 10% discount £0.55 £0.66 406-705 Laminating Brush 25mm (1") £0.86 £1.03 WAX ADDITIVE 10 + less 10% discount £0.77 £0.93 Wax Additive is 2% wax in styrene solution. When added to the resin at the rate of 2% 406-710 Laminating Brush 38mm (1½") £1.07 £1.28 by weight to the resin content of the mix, will virtually eliminate surface tackiness 10 + less 10% discount £0.96 £1.16 caused by air inhibition. Harmful 406-715 Laminating Brush 50mm (2") £1.41 £1.69 10 + less 10% discount £1.27 £1.52 405-895 Wax Additive 30ml £3.05 £3.66 POLISHING A complete system for buffing and polishing resins that will give a quick, flawless finish AUTO-DISPENSER to any cast blocks, especially to Clear Casting Resin which has articles embedded or For dispensing Liquid Hardener (Catalyst). Bottles encapsulated. Rub down the block with 120 grit and 320 grit wet and dry paper (use are plastic and will not spill their contents if acciden- wet), washing the block in running water after each grade. Then use the red buffing tally knocked over (provided the top cylinder is left compound on a buffing mop to polish off any remaining scratches or marks on the empty). The 500ml size bottle can be kept filled from surface of the block. Clean off any remaining red compound and then repeat using the the 500g bottles of Liquid Hardener which do not white finishing compound on a finishing mop to produce a highly polished surface. The have built-in measuring facilities. The bottle can be mops can be used in an electric drill clamped on a bench mounting. By using the steel set to meter out selected amounts up to 15ml auto- arbor, both mops are easily and quickly changed by simply screwing on or off. The matically. mops have a centre hole for mounting on the steel arbor. Always use goggles and a dust mask when polishing. The polishing process is described in more detail in the Polyester Resin Technical Booklet (990-505). 405-900 Auto-dispenser (0 - 15ml) £8.55 £10.26

ACRYLIC COATING Acrylic spray coat / sealer. Forms a tough, tena- cious skin, giving a protective coat to all polished objects, particularly copper, brass and bronze. It can be used for sealing wet clay before applying polyesters. In 400ml aerosol cans. 409-250 Steel Arbor £5.75 £6.90 Extremely Flammable 409-260 Red Buffing Compound approximately 1.25kg £6.71 £8.05 409-270 White Finishing Compound approximately 800g £8.07 £9.68 409-280 Buffing Mop 50-fold 10cm £4.71 £5.65 409-290 Buffing Mop 50-fold 15cm £6.65 £7.98 409-300 Finishing Mop 60- fold 10cm £4.30 £5.16 409-310 Finishing Mop 60-fold 15cm £6.39 £7.66

407-706 Acrylic Coating 400ml £9.75 £11.70 AUTOGLYM METAL POLISH 12 + less 10% discount £8.78 £10.53 Excellent liquid polish to use on cold cast resin metals; use fine steel wool first, then MELINEX FOIL Autoglym. Also good on resin generally Polyester resin will not stick to Melinex Foil. Use to lay on exposed resin surfaces to where a high finish is required. obtain a tack-free casting.

408-550 Autoglym Metal Polish 325ml £7.77 £9.32 409-100 Melinex Foil 15cm x 91cm roll £1.41 £1.69 MOULDS Polypropylene mould in a basic shape, with highly finished surface, specially for use in embedding. Polyester resin will not stick to polypropylene and a high finish is MIXING STICKS imparted to the surfaces of the cast in contact with the mould, two sizes available. Flat spatula wooden mixing sticks, approximately 148mm x 18mm (6" x ¾").

409-170 Mixing Sticks (pack of 10) £0.78 £0.93 409-080 Rectangular Mould (85x55x30mm) £4.24 £5.08 409-180 Mixing Sticks (box of 100) £2.49 £2.98 10 + less 10% discount £2.24 £2.69

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 71

catalogue2018a.p65 71 8/8/2018, 11:54 AM WHITE MET ALS / TIN ALLOYS

Figures in No.4 Alloy, by Ramon Labayen of Spain (cast using the Centricast Machine).

White Metal is a general term which includes all tin / lead alloys; characteristically, they do not change colour when liquid (unless overheated). Various alloys are available, for hand or machine casting, for making jewellery, model making (architectural, industrial, railway, military, etc.), and prototype work. Virgin Bismuth is also available to alloy with pure lead to drop the casting temperature when using silicone rubber moulds.

All metals are supplied in long thin ingots called tinman’s sticks, for easy melting in flat bottom ladles and in our electric melting pots. White metals will cast in silicone rubber - RTV- 101 is normally used. Recommended pouring temperatures are given, but pour at the lowest temperature consistent with filling the mould satisfactorily. Always dust the mould with talc (or graphite powder) before casting, and pour metal in one fluent action without a break. Allow sufficient time for metal to set before removing from the mould. Beware - even the mould can become very hot. Do not attempt to water cool, and do not pour hot metal into damp or wet moulds. Special note: Any hazard to health is only likely to occur from lead rich alloys. We are obliged to draw your attention to the Health & Safety Rules supplied with each pack of metal; become familiar with these before using the metal.

White Metal Colouring. Chemical treatment of white metals will change the colour; Cupra (which gives white metals a copper colour) is shown in the Restoration and Finishing Section. MP = Melting Point SOT = Suggested Operating Temperature

KA LOW MELT ALLOY HAND CASTING STARTER KIT A tin rich alloy, with good flow properties making it an ideal metal for castings with thin A kit designed as an introduction to hand casting in white metals. Use for casting section or fine delicate filigree detail, e.g. jewellery and jewellery components. Will military figures, railway models, jewellery components, dolls house accessories, etc. produce castings which have a good shiny surface and are malleable. Porosity The kit contains all the materials, accessories and instructions you will need to make a problems could indicate the metal has been overheated. Contains Tin / Antimony / Lead. mould from your original master, and be able to cast the items in white metal. The kit MP = 186ºC, SOT = 240ºC to 280ºC contains: 1kg RTV-101 silicone rubber and catalyst, 907g (2 lb) Soft Chavant 803-120 KA Low Melt Alloy 1 kg £18.90 £22.68 Plasteline, Formula 5 Release Agent, Sprue Cutter, 250g No.4 Alloy,Flat 803-130 KA Low Melt Alloy 5 kg £84.52 £101.42 Bottom Ladle, 900ml Mixing Beaker, Pack of 10 Mixing Sticks, 20g talc, 803-140 KA Low Melt Alloy 25 kg £403.27 £483.92 Silicone Rubber Technical Booklet 4 + less 5% discount £383.11 £459.73

802-200 Hand Casting Starter Kit £51.31 £61.57 NO.2 LOW MELT ALLOY LEAD FREE PEWTER A general lead rich tin alloy suitable for a wide range of casting applications. Use for Pewter is a very high grade alloy, considered to be a metal in its own right. Suitable for casting figures, jewellery components, military models, dolls house accessories, etc. highly detailed castings where good flow properties and a highly polished finish are Gives excellent reproduction of detail; castings are malleable. Contains Tin / Antimony required. Being lead free, tin rich (92%) and because of its high degree of finish, it is / Lead. MP = 243ºC, SOT = 290ºC to 310ºC especially suited for the manufacture of jewellery and jewellery components. Conforms to BS.5140. MP = 245ºC, SOT = 280ºC to 295ºC (max. 310ºC) 803-320 No.2 Low Melt Alloy 1 kg £16.35 £19.62 803-330 No.2 Low Melt Alloy 5 kg £72.73 £87.27 803-010 Lead Free Pewter 250g £11.24 £13.22 803-340 No.2 Low Melt Alloy 25 kg £346.43 £415.71 803-020 Lead Free Pewter 1 kg £33.64 £40.36 4 + less 5% discount £329.11 £394.93 803-030 Lead Free Pewter 5 kg £152.75 £183.30 803-040 Lead Free Pewter 25 kg £732.22 £878.66 4 + less 5% discount £695.61 £834.73 NO.3 LOW MELT ALLOY A lead rich alloy specially produced for casting flat surfaces where porosity may be a LEAD FREE PEWTER NO.2 problem. Use for casting car body shells, vehicle kits, railway modelling, loco kits and A new Pewter also conforming to BS.5140 but containing a trace of silver which gives parts. It has good flow properties, giving very good surface detail and good surface improved performance on flat surfaces, where porosity or pitting may be a problem. finish on flat areas. Low malleability. Contains Tin / Antimony / Lead. Again, suitable for jewellery or jewellery components requiring a highly polished lead MP = 225ºC, SOT = 275ºC to 295ºC free finish. MP = 220ºC, SOT = 265ºC to 280ºC 803-420 No.3 Low Melt Alloy 1 kg £18.47 £22.16 803-810 Lead Free Pewter No.2 1 kg £35.90 £43.08 803-430 No.3 Low Melt Alloy 5 kg £82.55 £99.06 803-820 Lead Free Pewter No.2 5 kg £163.24 £195.88 803-440 No.3 Low Melt Alloy 25 kg £393.79 £472.54 803-830 Lead Free Pewter No.2 25 kg £782.85 £939.42 4 + less 5% discount £374.10 £448.92 4 + less 5% discount £743.70 £892.45

72 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 72 8/8/2018, 12:01 PM NO.4 LOW MELT ALLOY SOLDER MELTING POT A general purpose tin-less extra low melting lead alloy. Excellent for casting figures A convienient and small capacity giving good detail, with a matt finish ideal for painting. Its extra low working temperature melting pot that is suitable for those makes this an easy casting metal ideal for hand casting. Castings are very malleable. starting out in white metal / pewter Contains Lead / Bismuth. MP = 168ºC, SOT = 220ºC to 230ºC casting or experienced modelmakers who only require small batch 803-510 No.4 Low Melt Alloy 250g £6.96 £8.35 quantities of molten alloy. The 803-520 No.4 Low Melt Alloy 1 kg £19.86 £23.83 temperature is thermostatically 803-530 No.4 Low Melt Alloy 5 kg £88.97 £106.76 regulated between 200-450ºC and 803-540 No.4 Low Melt Alloy 25 kg £424.45 £509.34 energy efficient, useing only 250w. 4 + less 5% discount £403.23 £483.87 The crucible is titanium plated so alloy will not stick. LF NO.3 LEAD FREE LOW MELT ALLOY Voltage: 220-230v, Wattage: 250w, Temperature: 200-450ºC , Capacity: 850g-1.25kg A very low melting lead free tin alloy. It is used for castings that have thin flat surfaces, and having very good flow properties reproduces the finest detail. It has similar uses to 802-090 Solder Melting Pot £30.97 £37.16 our No.3 alloy, but being lead free it is also good for jewellery and jewellery components. Contains Tin / Bismuth. MP = 138ºC, SOT = 150ºC to 180ºC BEARING METAL 803-620 LF No.3 Low Melt Alloy 1 kg £35.19 £42.22 Very hardwearing, durable lead free white metal specifically designed for plain metal 803-630 LF No.3 Low Melt Alloy 5kg £159.93 £191.91 bearings, precision moving parts etc. Brinell Hardness @ 100ºC = 12 803-640 LF No.3 Low Melt Alloy 25 kg £766.83 £920.19 Melting range = 241ºC - 354ºC SOT = 380º (we will supply as near as possible to the 4 + less 5% discount £728.49 £874.19 weight you request, and charge for the exact weight supplied)

BISMUTH 804-135 Bearing Metal per kg £32.94 £39.52 Used for modifying the casting characteristics of alloys and lead. 10% Bismuth added to lead will reduce the melting point producing an alloy with an operating temperature LADLES between 260ºC to 300ºC. A 15% addition produces an alloy with an operating tem- The C178 Centricast cast iron ladle can be used with any of our melting pots;it is left perature between 230ºC to 280ºC. Adding bismuth to lead improves the casting in the metal and retains the heat when pouring. The C178 holds approximately 400g of characteristics of pure lead and also brings it within the working temperature of RTV-101 white metal. The 10cm (4") Metal Ladle holds approximately 1.25 kg of metal, and fits silicone rubber. Contains only virgin Bismuth. MP = 271ºC the TE20 and TE30 Melting Pots. The Flat Bottom Ladle is for melting small amounts of white metal (up to 400g) on a stove or gas heat when hand casting. Also useful for 803-710 Pure Bismuth 250g £9.98 £11.97 sampling different metals when machine casting. Do not stand in alloy. Right or left 803-720 Pure Bismuth 1 kg £36.74 £44.08 hand pour.

WOODS METAL ALLOY Woods metal is commonly used for pipe bending, tool holding, etc. When pipe bending, it is essential to cool metal as quickly as possible to anneal it. When this metal is cast into sticks it produces a very low melt solder that (when used in conjunction with a low temperature soldering iron) can be used to solder white metal parts together. Do not heat above 250ºC or it will give off toxic cadmium fumes. Contains Tin / Lead / Cadmium / Bismuth. MP = 70ºC, well below the temperature of boiling water. C178 Ladle Flat Bottom Ladle Metal Ladle 10cm (4”)

804-130 Woods Metal Alloy 1 kg £33.52 £40.22 801-710 C178 Centricast Ladle (400g capacity) £18.29 £21.94 801-720 Metal Ladle 10cm (4”) (1.25 kg capacity) £14.40 £17.28 802-300 Flat Bottom Ladle £5.64 £6.76 ELECTRIC METAL MELTING POTS White Metal melting pots with built in electronic controllers. Provided the pots are kept at least half full they are very accurate, keeping the metal to within one or two degrees INGOT MOULD of the set temperature. Whilst it is possible to melt white metals on a stove, even a small Cast iron, 4 section ingot mould; takes approximately change in temperature of the cast metal can affect how well it will cast. Having a melting 2 kg of white metal in all. Useful for emptying the pot removes some of these uncertainties and also speeds up your production espe- melting pot when changing metals or re-cycling waste cially when casting centrifugally on the Centricast machine. Melting Temperature range metal, sprues, etc. 0ºC to 400ºC. Normally supplied 200 / 240 volts AC, but can be supplied 110 / 120 volts to special order. 801-650 C176 Ingot Mould £22.53 £27.03

Type Nominal Dia. Deep Wattage SPRUE CUTTER Capacity mm mm For cutting channels and sprues in silicone rubber TE5 5 kg 75 105 750 moulds (both machine and hand casting). Produces a TE20 20 kg 135 125 2,000 'U' shaped cutter which is better than using a scalpel TE30 30 kg 160 145 3,000 which makes cross cuts and weakens the mould. Keep blade sharp. Spare blades are available.

801-610 C161 Sprue Cutter Spare Blade £1.06 £1.27 801-620 C160/1 Sprue Cutter (complete) £4.53 £5.43

FRENCH CHALK / TALC Commercial grade French Chalk / Talc for dusting moulds prior to casting white metals and Pewter.

511-310 French Chalk / Talc 20g £0.71 £0.85 511-320 French Chalk / Talc 200g £2.57 £3.08 511-330 French Chalk / Talc 2.5 kg £5.92 £7.10 511-335 French Chalk / Talc 15kg £24.74 £29.68

GRAPHITE POWDER An alternative to Talc for dusting moulds prior to casting white metal and Pewter.

802-100 TE5 Metal Melting Pot £495.76 £594.91 510-460 Graphite Powder 250g £3.61 £4.33 802-110 TE20 Metal Melting Pot £621.22 £745.46 510-480 Graphite Powder 2.5 kg £15.25 £18.30 802-120 TE30 Metal Melting Pot £769.08 £922.89 510-490 Graphite Powder 25kg £71.92 £86.30

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 73

catalogue2018a.p65 73 8/8/2018, 12:08 PM CENTRICAST CENTRIFUGAL CASTING & MOULDMAKING MACHINE

The C300 Centricast Machine is a complete low cost system which makes moulds in cold cure silicone rubber (RTV-101) and then casts in white metals and Pewter. It is used for casting military figures and accessories, vehicle kits, model railway parts, jewellery, badges, jewellery components and dolls house accessories. The advantage over hand casting is that castings are produced much more quickly and in quantity, detail and finish are improved, and by harnessing centrifugal force, hitherto difficult parts such as rifles or fine filigree parts will cast more easily.

Using cold cure silicone rubber for mouldmaking means that no heat or pressure is required to make moulds; consequently, masters can be made from any reasonably hard material, such as plastic, Milliput, white metal, Plastikard, Super Sculpey, or even hard wax.

The Machine is of a compact and robust design, CE marked, and is ideal for Educational, home or workshop use, working off normal domestic supply. Normal voltage is AC 240 Volts (3 amps); 110 Volt version is available to special order. A fully illustrated Manual with hints and tips on mouldmaking and casting comes with each machine. Centricast Machines are made by us at Thatcham, are guaranteed in proper use for twelve months, and can normally be supplied from stock.

Demonstrations can be arranged at either our London or Thatcham premises, and technical advice can normally be obtained by calling us at Thatcham during normal working hours.

C300 CENTRICAST MACHINE Centricast Plate Pack 7a includes 1 pair of 7" plates, 1 pair of 7" x 3/8" rings, a pack The C300 Centricast Machine has a variable speed controller and dynamic braking of 3 x C248 'A' Studs and Nuts, a pack of 3 x Nylon Mould Opener Screws. to stop the turntable when the motor is switched off (or lid opened). The switch is also a thermal safety cut-out. When properly operated it is impossible to accidentally spill Centricast Plate Pack 10a includes 1 pair of 10" plates, 1 pair of 10" x 3/8" rings, a metal or casting material out of the machine. Melting pot not included. pack of 4 x C248 'A' Studs and Nuts, a pack of 4 x Nylon Mould Opener Screws.

The Machine is sold without plates or rings, but includes the Universal Former Plugs, All plates and mould rings can also be supplied separately; the largest mould possible Sprue Cutter, Location Formers, and an illustrated Manual. Plate Packs are supplied for the C300 Centricast Machine is 9¼" x 2½" high by stacking rings (see Manual). separately in either 7" or 10" version. When ordering, please specify which you require.

801-050 Centricast Plate Pack 7a £152.96 £183.55 801-030 C300 Centricast Machine £832.82 £999.38 801-070 Centricast Plate Pack 10a £181.51 £217.81

74 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 74 8/8/2018, 12:09 PM MOULD PLATES MOULD OPENER SCREWS Anodised aluminium mould plates, available in two sizes. The plates, which are The C198 Screws are normally supplied with the plate sets. universal (identical) are sold in pairs, and come complete with Nylon Mould Opener Screws.

801-500 C198 Mould Opener Screws - Set of 3 £1.36 £1.63 801-510 C198 Mould Opener Screws - Set of 4 £1.41 £1.69

STUD CLAMPS & THUMB NUTS Sold in sets of 3 for 7" plates, and sets of 4 for 10" plates, complete with C251 thumb nuts. 801-100 C205 Centricast Plates 7" (pair) £108-24 £129.88 801-130 C274 Centricast Plates 10" (pair) £183.40 £220.08

MOULD RINGS Mould rings are available to fit the 7" or 10" Plates. 7" rings make moulds 6¼" diameter, 10" rings make moulds 9¼" diameter. By using 2 x 3/8" rings and 2 x 5/8" rings, it is possible to make a 2" deep mould. Supplied in pairs. C248 'A' Stud Set C252 'D' Stud Set To give a rough idea of the amount of rubber required for moulds, the following is a guide, not allowing for the central hole etc: 801-400 C248 'A' Stud & Nuts - Set of 3 (for 3/4" moulds) £21.31 £25.57 7" plates, 3/8" rings - mould size: 159mm x 19mm (6¼" x ¾") = 500g rubber 801-410 C248 'A' Stud & Nuts - Set of 4 (for 3/4" moulds) £27.74 £33.28 7" plates, 3/8" + 5/8" rings - mould size: 159mm x 51mm (6¼" x 2") = 1.5kg rubber 801-420 C249 'B' Stud & Nuts - Set of 3 (for 1¼" moulds) £13.96 £16.75 10" plates, 3/8" rings - mould size: 235mm x 19mm (9¼" x ¾") = 1.175kg rubber 801-430 C249 'B' Stud & Nuts - Set of 4 (for 1¼" moulds) £17.58 £21.09 10" plates, 3/8" + 5/8" rings - mould size: 235mm x 51mm (9¼" x 2") = 3.125kg rubber 801-440 C250 'C' Stud & Nuts - Set of 3 (for 2" moulds) £15.54 £18.64 801-450 C250 'C' Stud & Nuts - Set of 4 (for 2" moulds) £20.05 £24.06

801-460 C252 'D' Stud & Nuts - Set of 3 (for 2½" moulds) £16.42 £19.70 801-470 C252 'D' Stud & Nuts - Set of 4 (for 2½" moulds) £21.22 £25.46

801-200 C206 Centricast Mould Rings 7" x 3/8" pair £46.22 £55.46 801-210 C207 Centricast Mould Rings 7" x 5/8" pair £40.93 £49.11 801-260 C275 Centricast Mould Rings 10" x 3/8" pair £51.29 £61.54 801-270 C276 Centricast Mould Rings 10" x 5/8" pair £49.02 £58.82

FORMER PLUGS Nylon Former Plugs for forming the base button, reservoir and pouring hole. The Universal Former Plug Set can be used to make all sizes of mould on the C300. The set is available on its own with instructions, but from mid-1997 has been supplied as standard with all machines, and instructions have been incorporated in the Manual.

Example of a 7" mould, with castings in No.3 Low melt Alloy

801-385 C290 Universal Former Plug Set £31.50 £37.80

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 75

catalogue2018a.p65 75 8/8/2018, 12:13 PM RESTORATION & FINISHING

517-102 Substitute Gold Leaf Transfer (1 book) £4.73 £5.67 GOLD LEAF & MET AL LEAF 5 + less 5% discount £4.49 £5.39 20 + less 10% discount £4.26 £5.11 GOLD LEAF 100 + less 15% discount £4.02 £4.82 Fine yellow Double or Regular gold leaf, available Loose and in Transfer form. Double 200 + less 20% discount £3.78 £4.54 means that it's heavier sheet than the standard regular, and Transfer means that the gold leaf sheet has been pressed onto tissue paper, and so it is easier to handle than loose (but it is only suitable for oil gilding). 23¾ Carat is the best grade to use outdoors. SILVER LEAF

ORANGE GOLD LEAF 22 CARAT Gold leaf, deep gold colour in 22 carat, available in regular only. Leaf size 80mm x 80mm in books of 25 leaves. Discounts on 5, 20, 100 and 200 books. Available loose or transfer.

517-120 Silver Leaf Loose (1 book) £6.15 £7.38 5 + less 5% discount £5.84 £7.01 20 + less 10% discount £5.53 £6.64 517-050 Gold Leaf 22 ct Regular Loose (1 book) £24.71 £29.65 100 + less 15% discount £5.19 £6.22 5 + less 5% discount £23.47 £28.16 200 + less 20% discount £4.92 £5.90 20 + less 10% discount £22.24 £26.69 100 + less 15% discount £21.00 £25.20 200 + less 20% discount £19.77 £23.72 COPPER LEAF

517-060 Gold Leaf 22 ct Regular Transfer (1 book) £24.54 £29.44 5 + less 5% discount £23.31 £27.98 20 + less 10% discount £22.09 £26.50 100 + less 15% discount £20.86 £25.03 200 + less 20% discount £19.63 £23.55

ROSENOBLE DOUBLE GOLD LEAF 23¾ CARAT Double gold leaf, rosenoble gold colour in 23¾ carat. Leaf size 80mm x 80mm in books 517-130 Copper Leaf Loose (1 book) £3.44 £4.12 of 25 leaves. Discounts on 5, 20, 100 and 200 books. 5 + less 5% discount £3.27 £3.92 Available loose or transfer. 20 + less 10% discount £3.10 £3.72 100 + less 15% discount £2.92 £3.51 200 + less 20% discount £2.75 £3.30

517-132 Copper Leaf Transfer (1 book) £4.59 £5.50 5 + less 5% discount £4.36 £5.23 517-070 Gold Leaf 23¾ ct Double Loose (1 book) £30.93 £37.11 20 + less 10% discount £4.13 £4.96 5 + less 5% discount £29.38 £35.26 100 + less 15% discount £3.90 £4.68 20 + less 10% discount £27.84 £33.40 200 + less 20% discount £3.67 £4.40 100 + less 15% discount £26.29 £31.55 200 + less 20% discount £24.74 £29.69 RED VARIEGATED LEAF 517-080 Gold Leaf 23¾ ct Double Transfer (1 book) £30.54 £36.64 5 + less 5% discount £29.01 £34.82 20 + less 10% discount £27.49 £32.98 100 + less 15% discount £26.29 £31.55 200 + less 20% discount £24.43 £29.32

METAL LEAF

SUBSTITUTE GOLD AND OTHER METAL LEAF 517-140 Red Variegated Gold Leaf Loose (1 book) £6.15 £7.38 Substitute or imitation gold leaf, known also as Schlag Leaf or Dutch Metal . The leaf is 5 + less 5% discount £5.84 £7.01 comparatively thick compared to real gold leaf and very easy to handle. Must be 20 + less 10% discount £5.53 £6.64 varnished afterwards to avoid tarnishing and to protect it (e.g. with Ormoline Sealer). 100 + less 15% discount £5.19 £6.22 Acrylic Gold Size is ideal for use with these metal leafs. Leaf size 140mm x 140mm in 200 + less 20% discount £4.92 £5.90 books of 25 leaves. Available in substitute gold, red/green/blue and black variegated gold, copper, and aluminium. Discount on 5, 20, 100 and 200 books. Silver Leaf. Genuine Silver Leaf. Available loose only. Must be varnished as soon as laid to avoid GREEN VARIEGATED LEAF tarnishing. Leaf size 95mm x 95mm. Discount on 5, 20, 100 and 200 books.

517-100 Substitute Gold Leaf Loose (1 book) £3.09 £3.70 517-142 Green Variegated Gold Leaf Loose (1book) £6.15 £7.38 5 + less 5% discount £2.94 £3.53 5 + less 5% discount £5.84 £7.01 20 + less 10% discount £2.78 £3.34 20 + less 10% discount £5.53 £6.64 100 + less 15% discount £2.63 £3.16 100 + less 15% discount £5.19 £6.22 200 + less 20% discount £2.47 £2.96 200 + less 20% discount £4.92 £5.90

76 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 76 8/8/2018, 12:27 PM BLUE VARIEGATED LEAF GOLD SIZE (MIXTION À DORER) Roberson Gold Size. An oil based glue, hence used in oil gilding or transfer leaf gilding. For use with schlag metal, gold leaf and bronze powders, use over any non-absorbant painted or ground surface, canvas, panel, wall, glass or metal. Leaf and powders can be applied once a tackyness similar to sellotape has been achieved. 3-4 drying time, 1½-2 hour open time. Once gold is applied to the gold size, it cannot be burnished.

517-144 Blue Variegated Gold Leaf Loose (1book) £6.15 £7.38 Flammable Harmful 5 + less 5% discount £5.84 £7.01 20 + less 10% discount £5.53 £6.64 517-230 Gold Size 3-4 Hour 60ml £6.38 £7.65 100 + less 15% discount £5.19 £6.22 517-240 Gold Size 3-4 Hour 250ml £10.46 £12.55 200 + less 20% discount £4.92 £5.90 517-245 Gold Size 3-4 Hour 1 Litre £27.62 £33.14

BLACK VARIEGATED LEAF LE FRANC CHARBONNEL GOLD SIZE A superior quality oil gold size with excellent leveling properties and long open times, used on non-porous and metal surfaces inside and out. Can be thinned with mineral spirits (white spirit) which may give a reduced drying time. 3 hour remains open for 4-6 hours and best suited to smaller areas, 12 hour is suitable for large areas, outdoor work, in dry condions and where there is not too much dust. Harmful 517-146 Black Variegated Gold Leaf Loose (1book) £6.15 £7.38 5 + less 5% discount £5.84 £7.01 517-222 Le Franc Gold Size 3 Hour 75ml £6.98 £8.37 20 + less 10% discount £5.53 £6.64 517-224 Le Franc Gold Size 3 Hour 250ml £22.01 £26.41 100 + less 15% discount £5.19 £6.22 517-247 Le Franc Gold Size 3 Hour 1 Litre £58.91 £70.69 200 + less 20% discount £4.92 £5.90 517-250 Le Franc gold size 12 hour 75ml £7.40 £8.88 517-260 Le Franc gold size 12hour 250ml £24.89 £29.86 ALUMINIUM LEAF 517-265 Le Franc gold size 12hour 1 litre £60.52 £72.62

ACRYLIC GOLD SIZE Water based gold Size (and so non-flammable) ready to gild in about 15 minutes, but will remain open indefinitely. For use with gold leaf, metal leaf and bronze powders. Use over non- porous surfaces or one that has been sealed with shellac, etc. Wash brushes in warm soapy water. 517-150 Aluminium Leaf Loose (1 book) £3.26 £3.91 5 + less 5% discount £3.09 £3.72 20 + less 10% discount £2.93 £3.52 517-300 Acrylic Gold Size 250ml £9.44 £11.32 100 + less 15% discount £2.77 £3.32 200 + less 20% discount £2.61 £3.13 GUM AMMONIAC Natural gum, purified water and preservative. Flows easily 517-152 Aluminium Leaf Transfer (1 book) £4.59 £5.50 from a flexible pen or brush and dries quickly to a transparent 5 + less 5% discount £4.36 £5.23 and glossy finish. Gold leaf can be laid on gum ammoniac 20 + less 10% discount £4.13 £4.96 immediately after it has dried, or after a time lapse of several 100 + less 15% discount £3.90 £4.68 years, since it can be reactivated by hot breath. 200 + less 20% discount £3.67 £4.40 NOTE - Store all substitute gold and other leaf in a cool DRY place, shelf life is 3 months approx. 517-345 Gum Ammoniac 30ml £8.59 £10.30

GOLD & METAL LEAF SUNDRIES ROBERSON’S WATER GOLD SIZE Gum Arabic, Gamboge Resin, White Vinegar and Glycerine. GESSO-BOLE For gilding or repairing with gold leaf or bronze powder on frame, paper or glass. For best results allow glue to dry A Replacement for redy made gesso, this product is made from the finest English (tacky 20-25 minutes) before applying loose gold leaf. Unlike clays. the oil gold size, you can burnish when using this Water Gold The gesso bole is premixed and no additional glue is necassary. To be used at room Size. temperature. Can be thinned with water up to 15% if required. Available in white and dark terracotta, colours can be mixed. 517-350 Water Gold Size 15ml £6.97 £8.36 517-360 Water Gold Size 60ml £14.63 £17.23

RABBIT SKIN GLUE Principally for making Gesso, but has many other uses. Preparation of Gesso: the dry glue should be soaked overnight or for at least 6 hours, so that it can absorb its own sufficiency of water. When the glue is ready, it should be thinned with 9 parts water to glue by weight. Gently heat in a double boiler until the glue is melted; enough fine whiting should be added to make a creamy emulsion. Paint about 8 or 10 coats of gesso on to the object, and when dry rub down with fine emery paper to achieve a smooth finish.

515-035 Gesso-Bole: White 100ml £9.10 £10.92 517-500 Rabbit Skin Glue 250g £5.76 £6.91 515-045 Gesso-Bole: Dark Terracotta 100ml £9.10 £10.92 517-520 Rabbit Skin Glue 1 kg £19.26 £23.11 517-530 Rabbit Skin Glue 5 kg £84.66 £101.59

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 77

catalogue2018a.p65 77 8/8/2018, 12:33 PM BURNISHING CLAY (BOLE - ASSIETTE À DORER - POLIMENT) GILDERS' CUSHION Extra fine gilders’ clay. Allows the loose gold to adhere with a very diluted size water, Essential support for cutting gold leaf. Leather pad complete with parchment draught or spirit and water mix, as wetting agent. Before use, mix into a solution with warm shield and hand straps. Size 15.5cm x 25.5cm (6" x 10"). Rabbit Skin Glue (1 volume Clay to 1 volume Rabbit Skin Glue). As with Gesso, several thin coats are preferable to fewer thick coats. Each coat must be thoroughly dry before painting on the next coat. Two or three coats onto a smooth surface are generally sufficient. Gently rub with a soft cloth before application of gold leaf. This bole makes a good surface for metallic waxes and paints. LeFranc Bourgeois brand. We also stock Dry Red Armenian Bole which is the best quality red bole available, for gilders who wish to make up bole to their individual recipe.

518-200 Gilders' Cushion £26.00 £31.20

GILDERS' KNIFE Not for sale to anyone under the age of 16. Gilders' knife with 15cm double edge straight blade and rounded tip.

517-405 Dry Red Armenian Bole 100g £5.02 £6.02

517-415 Gilders’ Clay: Red 1ltr £35.16 £42.19 517-425 Gilders’ Clay: Yellow 1ltr £38.67 £46.40 518-255 Gilders' Knife 15cm Double Edge £14.37 £17.24 517-435 Gilders’ Clay: Black 1ltr £38.67 £46.40 GILDERS' TIPS For picking up loose real or imitation gold leaf, etc. Generate static electricity from the GILDERS' WHITING hair or beard by rubbing tip across hair. If in difficulty, a little petroleum jelly on the wrist Finest Gilders' Whiting, for use in making compo and gesso. is useful, so that you can brush the tip across it before picking up leaf. Available in three sizes: 807-355 Gilders' Whiting 500g £2.61 £3.13 807-356 Gilders' Whiting 2.5 kg £7.33 £8.79 807-400 Gilders' Whiting 25 kg £13.60 £16.32

ORMOLINE GILDING MEDIUM A special PVA-based mixture for instant gilding. Use like ink, ensuring there is plenty of fluid on the paper. Allow to dry (5- 518-300 Gilders' Tip 26mm (1") £5.01 £6.01 20 minutes). Have sheet of transfer gold ready. Breathe 518-310 Gilders' Tip 38mm (1½") £6.08 £7.29 warmly on the medium and press gold down firmly. Brush 518-320 Gilders' Tip 90mm (3½") £12.36 £14.83 away excess gold. TAMPING BRUSH FOR GOLD LEAF 517-700 Ormoline Gilding Medium 30ml £5.44 £6.52 Tamping brush for gently pressing down gold leaf. Soft hair bound into a quill.

ROBERSON'S IMPROVED GOLD BODY Raising Preparation, made from whiting, chrome yellow, arabic powder, glycerine and purified water. Used to raise surfaces 518-340 Tamping Brush for Gold Leaf £11.56 £13.87 where an embossed design is required when illuminating. Apply with a soft brush, and allow to become tacky before laying gold leaf or bronze powders. AGATE BURNISHERS Made from Agate stone, used for its hardness and smoothness. Burnish lightly in the same direction to begin with to test the strength of the Gesso, and then more heavily to 517-750 Improved Gold Body 15ml £5.53 £6.63 achieve a bright lustre. The burnishers have wooden handles; illustrations are approxi- 517-760 Improved Gold Body 60ml £12.00 £14.40 mately to half size.

No.11 SOFT HAIR MOPS Domed brushes, bound in goose quill with brass wire in plain wooden handles. High quality soft hair. No.23

No.25

No.37 518-020 No.4 Soft Hair Mop £15.69 £18.82 518-030 No.6 Soft Hair Mop £19.75 £23.70 518-040 No.8 Soft Hair Mop £26.11 £31.33 518-423 No.23 Agate Burnisher £17.83 £21.39 518-425 No.25 Agate Burnisher £23.61 £28.33 518-435 No.11 Agate Burnisher £14.17 £17.00 518-437 No.37 Agate Burnisher £15.28 £18.33

78 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 78 8/8/2018, 12:38 PM GILT WAX FINISHES & GILT FINISHES & VARNISHES TREASURE GOLD and LIQUID LEAF are both available in the same eight colours, PATINATION being shades of gold and other metals.

BRONZE POWDERS Liquid Leaf is a liquid brush-on gold or metallic colour. A 35ml bottle covers about The finest quality flake metal powders. Use with Ormoline Metallic Paint Medium or 2 square metres Harmful Shellac. Treasure Gold is a non-tarnishing wax gilt for decorating or restoring gold leaf, or Bronze Colours (Light / Medium / Dark) - please note that these three colours are no giving a gold leaf or other metal effect. It is applied and polished to a permanent lustre. longer available. However, we have a Base Bronze which is a bright (LG3) bronze A final protective coat of Treasure Sealer is advisable. Available in 25g pots, which colour, and the colour of this can be darkened by using Renaissance Wax together with cover about 3 square metres. artists’ quality black oil paint. Leaflet available. Alternatively use Rambouillet Gilt Cream or Varnish. . Classic

Renaissance

Brass

Pewter

Florentine

510-040 Bronze Powder: Light Gold 50g £3.36 £4.03 5 + less 5% £3.19 £3.76 White Fire 10 + less 10% £3.02 £3.55 510-070 Bronze Powder: Natural Copper 50g £3.54 £4.24 5 + less 5% £3.36 £3.96 10 + less 10% £3.19 £3.74 Copper 510-130 Bronze Powder: Dark Gold 50g £3.33 £3.99 5 + less 5% £3.16 £3.71 10 + less 10% £2.99 £3.52 Silver 510-380 Bronze Powder: Pale Green Bronze g £3.52 £4.14 5 + less 5% £3.34 £4.01 10 + less 10% £3.17 £3.80 514-010 Treasure Gold: Classic 25g £7.14 £8.56 510-220 Bronze Powder: Red Gold 50g £4.13 £4.95 514-020 Liquid Leaf: Classic 35ml £7.14 £8.56 5 + less 5% £3.92 £4.70 10 + less 10% £3.72 £4.46 514-030 Treasure Gold: Renaissance 25g £7.14 £8.56 510-250 Bronze Powder: Superfine Gold 50g £3.40 £4.08 514-040 Liquid Leaf: Renaissance 35ml £7.14 £8.56 5 + less 5% £3.23 £3.88 10 + less 10% £3.06 £3.67 514-050 Treasure Gold: Brass 25g £7.14 £8.56 510-280 Bronze Powder: Silver Bronze 35g £3.74 £4.48 514-060 Liquid Leaf: Brass 35ml £7.14 £8.56 5 + less 5% £3.55 £4.26 10 + less 10% £3.36 £4.03 514-070 Treasure Gold: Pewter 25g £7.14 £8.56 510-350 Bronze Powder: Base Bronze 50g £4.24 £5.08 514-080 Liquid Leaf: Pewter 35ml £7.14 £8.56 5 + less 5% £4.03 £4.84 10 + less 10% £3.82 £4.58 514-090 Treasure Gold: Florentine 25g £7.14 £8.56 514-100 Liquid Leaf: Florentine 35ml £7.14 £8.56 TREASURE SEALER A clear, fast drying sealer for most surfaces, but also acts as a clear protective coating 514-110 Treasure Gold: White Fire 25g £7.14 £8.56 for Liquid Leaf and Treasure Gold. 514-120 Liquid Leaf: White Fire 35ml £7.14 £8.56 Flammable Harmful 514-130 Treasure Gold: Copper 25g £7.14 £8.56 514-300 Treasure Sealer 60ml £6.00 £7.20 514-140 Liquid Leaf: Copper 35ml £7.14 £8.56 514-150 Treasure Gold: Silver 25g £7.14 £8.56 514-160 Liquid Leaf: Silver 35ml £7.14 £8.56

FONTENAY BASE

A sealing base coat varnish, to be brushed on before gilding with Gilt Varnish or Gilt Cream. This will ensure a good base by sealing a porous surface such as wood, paper, stucco, etc, and provide an undertone for gilding. Avail- able in Red. Fontenay should be applied on a clean surface, and allowed to dry for a few hours. Sand with very fine abrasive paper or BRUSH BATH 0000 Steel Wool to produce a smooth surface A thinner and solvent for Treasure Gold and Liquid Leaf. In 60ml pots. ready for gilding. 514-350 Treasure Brush Bath 60ml £5.55 £6.66 515-010 Fontenay Base: Red 30ml £9.37 £11.24

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 79

catalogue2018a.p65 79 8/8/2018, 2:55 PM GILT VARNISH ANTIQUING FLUID An Acrylic varnish coloured with bronze powders. It is best used on new surfaces well Formerly called Tourmaline. Cold patinating fluid for copper, brass and bronze. By a prepared, and preferably sealed with the Fontenay Base. Apply by brush and allow to simple technique, various metals can be coloured with a simple layer of oxide a few dry at least three hours and preferably overnight. Depending on the effect required, the microns thick. The metals should be first de-greased, then rinsed with water. Antiquing finish can be left as it is, or patinated using Gilt Creams or light abrasion using Steel Fluid can be applied with cotton wool and agitated over the surface, or the object dipped Wool. Brushes can be cleaned with Turpentine or White Spirit. Available in the six in the Antiquing Fluid either neat or a water / Antiquing Fluid solution. When colour is of the eight colours available as Gilt Creams. obtained, the metal is washed in water, then wax or lacquer applied to the surface to protect the finish. The colour can be controlled simply by appling more coats or by GILT CREAM dipping for longer periods of time. A soft wax / gold colour bronze powder preparation suitable for re-touching damaged Harmful gilding on frames, furniture, etc., and can also be used to gild new surfaces. Apply with the finger or a small round brush. Leave matt, or buff to a shine once the wax has dried (allow 12 hours). The colours can all be mixed to obtain the required shade; this can be done by applying successive layers or by mixing the creams. On new surfaces the cream can be a finish in its own right. For best results, prepare the surface with Fontenay Base and Gilt Varnish. Using both varnish and creams makes it possible to obtain a variety of shades by using different colours of both products. Brushes can be cleaned with Turpentine or White Spirit. Harmful Compiegne

517-034 Antiquing Fluid: Black 100ml £6.07 £7.28 Chantilly 517-036 Antiquing Fluid: Black 500ml £16.32 £19.58 517-037 Antiquing Fluid: Black 5kg £84.95 £101.94 Trianon BROWN BRONZE POWDER Versailles Patination Powder mixed with water and applied as a slurry/paste. Brown bronze powder is used to produce patina and stauary finishes on bronze, copper, gild brass Rambouillet and gun metals. Interesting finishes can also be achieved on ferrous metals. for best results mix to a slurry and apply evenly with a soft brush, allow to dry fully on the surface then burnish with a soft wire or stiff bristled brush. For darker Browns or blacks St Germain repeat as necessary. Protect the surface with wax or laquer once the required patina has be achieved. Harmful 515-120 Gilt Varnish: Saint Germain 30ml £8.48 £10.17 515-135 Gilt Cream: Saint Germain 30ml £9.72 £11.66

515-160 Gilt Varnish: Rambouillet 30ml £8.48 £10.17 515-175 Gilt Cream: Rambouillet 30ml £9.72 £11.66 Brown Bronze Powder on brass 515-180 Gilt Varnish: Compiegne 30ml £8.48 £10.17 515-195 Gilt Cream: Compiegne 30ml £9.72 £11.66

515-200 Gilt Varnish: Chantilly 30ml £8.48 £10.17 515-215 Gilt Cream: Chantilly 30ml £9.72 £11.66 Brown Bronze Powder on mild 515-220 Gilt Varnish: Trianon 30ml £8.48 £10.17 steel 515-235 Gilt Cream: Trianon 30ml £9.72 £11.66 516-025 Brown Bronze powder 50g £9.33 £11.19 515-240 Gilt Varnish: Versailles 30ml £8.48 £10.17 516-030 Brown Bronze powder 100g £16.15 £19.38 515-255 Gilt Cream: Versailles 30ml £9.72 £11.66 516-035 Brown Bronze powder 250g £38.88 £46.65

PATINATION & METAL TREATMENTS HAEMATITE IRON PASTE A cold patinating fluid to antique steel and iron. The surface of the object should first be A graphite paste for the care of all types of cast and degreased. Haematite can then be applied with cotton wool, or the object can be dipped wrought ironwork. It is suitable for all open fire equipment, into a solution of Haematite and water. When the desired colour is achieved, rinse with ovens, fire backs and grates. Clean metal first with Rust water. Sealing with a wax, oil or Lacquer is recommended fix colour. Remover, then apply Iron Paste with a Small Round Environmental Hazard Brush; leave to dry for 24 hours before buffing to a silvery sheen. Can also be used in finishing sculptures in various materials. Flammable

515-490 Iron Paste 250ml £10.74 £12.88

RESTORE PRE-CLEAN DEGREASER Restore pre-clean is a powerful water based degreasing concentrate used to remove 515-500 Haematite 100ml £6.32 £7.58 oil, grease and grime from all metal surfaces and is harmless to plastics, rubbers and 515-502 Haematite 500ml £22.78 £27.33 copper based alloys. Biodegradable formulation includes powerful corrosion inhibitor to 515-503 Haematite 5kg £111.32 £133.58 prevent flash rusting. 500ml concentrate makes up to 10 litres.

515-515 Restore Pre-clean degreaser £28.91 £34.69

80 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 80 8/8/2018, 3:00 PM SCULPT NOUVEA UUP PATINAS TRADITIONAL PATINA Extremely versatile patinas that will produce unique finishes on metals such as iron, Sculpt Nouveau provides artists, tradesmen steel, aluminium, bronze, brass and copper. Can be applied hot or cold as a spray or and visionaries with tools to make their in an immersion process. All of these will produce different effects. They can also be spaces come to life with rich surfaces and applied over one another or mottled for more interesting effects. Before applying the vivid colours. Founded by artists, Sculpt patina, it is recommended to thoroughly clean the metal to remove oil, oxides and Nouveau merges ancient design traditions residues. The patinas can be diluted by up to 50% with distilled water depending on the with modern science to provide users with desired strength of finish. When dry, protecting the finish with multiple colours of a clear solutions to create any metal surface effect sealer is recommended. that the can imagine. Harmful

METAL CLEANER Metal cleaner with built-in corrosion inhibitors that protect Traditional Patinas come in a range of metal surfaces while cleaning. Apply with a brush, sponge shades and colours and are available in or rag. For stubborn marks, use an abrasive to aid three sizes: 8oz, 32oz or 1 gallon to suit cleaning. Rinse with water after application and dry the a variety of individual requirements. surface. Harmful

515-800 Sculpt Nouveau Metal Cleaner 8oz (225ml) £10.37 £12.44 515-802 Sculpt Nouveau Metal Cleaner 32oz (946ml) £14.71 £17.65 515-804 Sculpt Nouveau Metal Cleaner 1Gal (3.78ltr) £24.96 £29.95

METAL OIL (JADE OIL REPLACEMENT) A clear oil for protecting all types of metal with built-in UV and corrosion inhibitors. Apply with a soft cloth or brush to the clean Powder Blue Light Green Tiffany Green metal or dry patinated surface. Rub in well and allow 3 to 12 hours to dry. Multiple coats can be applied for increased protection. Harmful 515-806 Metal Oil Clear 8oz (225ml) £17.31 £20.77 515-808 Metal Oil Clear 16oz (476ml) £29.45 £35.34 515-810 Metal Oil Clear 32oz(946ml) £52.86 £63.43 Japanese Brown Copper Rust Darkening CLEAR GUARD A clear, durable, fast drying lacquer that results in a dry and tarnish resistant film. It has excellent adhesion to all metals as well as to patinas and rusted metal. Clear Guard is UV stable and highly resistant to weather, water and chemical damage. Suitable for all types of application equipment designed for solvents, including many Stainless Black Slate Black Black Magic sprayers. Available in matte and satin finish. Harmful 516-600 Traditional Patina - Black Magic 8oz (225ml) £15.58 £18.69 515-812 Clear Guard Matte 8oz (225ml) £13.84 £16.60 515-602 Traditional Patina - Black Magic 32oz (946ml) £34.65 £41.58 515-814 Clear Guard Matte 32oz (946ml) £32.05 £38.46 515-604 Traditional Patina - Black Magic 1Gal (3.78ltr) £95.34 £114.40 515-816 Clear Guard Satin 8oz (225ml) £13.84 £16.60 515-818 Clear Guard Satin 32oz (946ml) £32.05 £38.46 516-608 Traditional Patina - Slate Black 8oz (225ml) £15.58 £18.69 515-610 Traditional Patina - Slate Black 32oz (946ml) £34.65 £41.58 515-612 Traditional Patina - Slate Black 1Gal (3.78ltr) £95.34 £114.40 SOLVENT THINNER Sculpt Nouveau's Solvent Thinner has no VOC's and is a 516-616 Traditional Patina - Darkening 8oz (225ml) £13.84 £16.60 very effective replacement for Xylene. Can be used to thin 515-618 Traditional Patina - Darkening 32oz (946ml) £27.71 £33.25 all solvents. For best results when spraying a solvent 515-620 Traditional Patina - Darkening 1Gal (3.78ltr) £62.39 £74.86 lacquer, thin with up to 10% Solvent Thinner. 516-624 Traditional Patina - Japanese Brown 8oz (225ml) £13.84 £16.60 Harmful 515-626 Traditional Patina - Japanese Brown 32oz (946ml) £27.71 £33.25 515-840 Solvent Thinner 8oz (236ml) £9.51 £11.41 515-628 Traditional Patina - Japanese Brown 1Gal (3.78ltr) £62.39 £74.86 515-842 Solvent Thinner 32oz (946ml) £19.04 £22.84 516-632 Traditional Patina - Powder Blue 8oz (225ml) £13.84 £16.60 515-634 Traditional Patina - Powder Blue 32oz (946ml) £27.71 £33.25 515-636 Traditional Patina - Powder Blue 1Gal (3.78ltr) £62.39 £74.86 SMART COAT A strong yet non-hazardous, zero VOC, no odour, one part, 516-640 Traditional Patina - Light Green 8oz (225ml) £13.84 £16.60 non-yellowing and non-cracking top coat. Works well over 515-642 Traditional Patina - Light Green 32oz (946ml) £27.71 £33.25 patinas, rust-oxides and clean metal. Not recommended for 515-644 Traditional Patina - Light Green 1Gal (3.78ltr) £62.39 £74.86 polished surfaces. Apply 2-3 light coats (1 hr. between coats) making sure the first layer saturates the rust or patina. Can be 516-648 Traditional Patina - Tiffany Green 8oz (225ml) £13.84 £16.60 applied via spray or with a dry brush. Cure time 24-48 hours. 515-650 Traditional Patina - Tiffany Green 32oz (946ml) £27.71 £33.25 Metal must be thoroughly cleaned before application. 515-652 Traditional Patina - Tiffany Green 1Gal (3.78ltr) £62.39 £74.86

515-820 Smart Coat Matte 8oz (225ml) £14.71 £17.65 516-656 Traditional Patina - Stainless Black 8oz (225ml) £15.58 £18.69 515-822 Smart Coat Matte 32oz (946ml) £32.05 £38.46 515-658 Traditional Patina - Stainless Black 32oz (946ml) £34.65 £41.58 515-824 Smart Coat Matte1Gal (3.78ltr) £68.46 £82.15 515-660 Traditional Patina - Stainless Black 1Gal (3.78ltr) £95.34 £114.40 515-828 Smart Coat Satin 8oz (225ml) £14.71 £17.65 515-830 Smart Coat Satin 32oz (946ml) £32.05 £38.65 516-662 Traditional Patina - Copper Rust 8oz (225ml) £13.84 £16.60 515-832 Smart Coat Satin1Gal (3.78ltr) £68.46 £82.15 515-664 Traditional Patina - Copper Rust 32oz (946ml) £27.71 £33.25

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 81

catalogue2018a.p65 81 8/8/2018, 3:09 PM BIRCHWOOD CASEY PATINA DYE OXIDES Birchwood Casey patina solutions are supplied concentrated and are then diluted with Designed for use on any metal surface the Dye oxide patinas come in a variety of distilled water. Used for immersion, brush on or spray normal dilution ratios of 1:1, 2:1 colours. They do not contain acids so they do not react with the metal. The colour of or 3:1 (patina to distilled water) can be used to suit different applications and to control these transparent dyes will remain the same and do not change as with an acid patina, the rate and depth of colour produced. they are UV safe indoor or outdoor and have no VOC's and can be applied both hot or PC-9 Presto Black quickly produces a deep black on iron & steel and can be cold. For Hot application the surface should be abraded, the metal surface heated to described as a standard gunmetal blue finish. 200ºC and applied by spray, brush or rag. PB1 Pewter Black is used predominantly for For Cold application follow the same preparation blackening tin, pewter and lead alloys or castings. and apply by spray, brush or rag, when using cold A14 Aluma Black is the fastest acting of all the application it is essential to fix the colour on the Birchwood Casey patinas, instantly blackening surface using a clear sealer. aluminium and creating ba deep black finish on Blue Dye Oxide on bronze engravings and simulated pewter finishes. M38 Antique Brown for copper, bronze and brass develops light golden browns through to traditional leathery or dark chocolate tones.

PB1 Pewter Black

PC9 Presto Black 516-840 Dye Oxide Black 8oz (236ml) £14.71 £17.65 516-842 Dye Oxide Black 32oz (946ml) £39.85 £47.82 516-846 Dye Oxide White 8oz (236ml) £14.71 £17.65 516-848 Dye Oxide White 32oz (946ml) £39.85 £47.82 516-852 Dye Oxide Blue 8oz (236ml) £14.71 £17.65 516-854 Dye Oxide Blue 32oz (946ml) £39.85 £47.82 516-864 Dye Oxide Brown 8oz (236ml) £14.71 £17.65 516-866 Dye Oxide Brown 32oz (946ml) £39.85 £47.82 516-870 Dye Oxide Green 8oz (236ml) £14.71 £17.65 516-872 Dye Oxide Green 32oz (946ml) £39.85 £47.82 A14 Aluma Black 516-882 Dye Oxide Orange 8oz (236ml) £14.71 £17.65 M38 Antique Brown 516-884 Dye Oxide Orange 32oz (946ml) £39.85 £47.82 516-894 Dye Oxide Red 8oz (236ml) £14.71 £17.65 516-800 PC9 Presto Black (225ml) £18.18 £21.81 516-896 Dye Oxide Red 32oz (946ml) £39.85 £47.82 516-802 PC9 Presto Black 32oz (946ml) £39.85 £47.82 516-912 Dye Oxide Yellow 8oz (236ml) £14.71 £17.65 516-804 PC9 Presto Black 1Gal (3.78ltr) £123.95 £148.74 516-914 Dye Oxide Yellow 32oz (946ml) £39.85 £47.82

516-808 PB1 Pewter Black 8oz (225ml) £18.18 £21.81 516-810 PB1 Pewter Black 32oz (946ml) £39.85 £47.82 METAL COATING 'B' Designed for indoor and outdoor use to simulate real metal becuase real metal powders 516-816 A14 Alumina Black 8oz (225ml) £18.18 £21.81 are suspended in them. Copper Bronze and Iron coatings can be applied to most 516-818 A14 Alumina Black 32oz (946ml) £39.85 £47.82 surfaces including dry/fired clay, plaster, cement, resin and other metals. Patinas can be applied while the metal coating is still wet or to dry/cured metal coating after lightly 516-822 M38 Antique Brown 8oz (236ml) £18.18 £21.81 burnishing the surface with '0000' wire wool. 516-824 M38 Antique Brown 32oz (946ml) £39.85 £47.82 Wet application on metal coating - Applying acid patina while the metal coating is still wet provides a longer time for the patina to react, resulting in a stronger colou rchange. LIVER OF SULFUR to create highlights the surface can be burnished once An traditional base patina used for both hot and cold application, easy to apply and cured. Applying a non reactive patina like Dye-Oxide is produces warm browns onto bronze, copper and brass. Supplied dry, a fresh solution best done wet tp provide a better bond of liver of sulfur should be made each time becuase it does not store well when mixed. between the patina and metal coating. Combine 1 teaspoon with 1 pint of distilled water. Dry application on metal coating - For Cold Technique - Using a brush, spray bottle or sponge, evenly cover the surface of successful reaction of acid patina is it the metal. Let the patina sit for 5 minutes, then wash down with cold water to neutralise, essential once cured to buff the surface highlights can be work over the surface with wire wool or scotchbrite. of teh metal coating. when applying a Hot Technique - Heat the metal with a torch until it is between 180-220ºF. Apply the liver non reactive like Dye Oxide is it of sulfur to the hot metal with a brush using cicular or stippling motions, keep applying necessary to buff and gently heat the until desired colour is achieved. surface, this will help the patina stick Harmful to the surface.

Bronze Copper Iron 521-204 Metal Coating 'B' Bronze 8oz (236ml) £12.97 £15.56 521-205 Metal Coating 'B' Bronze 16oz (476ml) £20.78 £24.93 521-208 Metal Coating 'B' Copper 8oz (236ml) £12.97 £15.56 Cold onto bronze Hot onto bronze 521-209 Metal Coating 'B' Copper 16oz (476ml) £20.78 £24.93 515-212 Liver of Sulfur 4oz (114g) £17.31 £20.77 521-212 Metal Coating 'B' Iron 8oz (236ml) £12.97 £15.56 521-213 Metal Coating 'B' Iron 16oz (476ml) £20.78 £24.93

82 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 82 8/8/2018, 3:20 PM WAX FINISHES & PATINA WAXES BLACK BISON STAINING WAX PASTE A blend of waxes designed to provide a fine finish to all types of woodwork. It is RENAISSANCE WAX particularly resistant to water marks and finger marks. The clear wax is used to give a Renaissance Wax has exceptional clarity and plasticity, and being free from acids, is lovely natural soft sheen on antiques and sealed modern furniture. The staining waxes neutral, so that it may be used safely on wood, leather, metals, stone, glass, plastics are particularly used to darken faded wood and to cover water marks, blemishes and and paper. Originally formulated in teh British Museum research laboratories in the scratches on antiques, whilst at the same time enriching the colour of the wood to give early 1950's in response to discussions amongst technitians at an international conference a beautiful sheen. If necessary, before applying Black Bison Wax, remove old waxes on fine art conservation. Unlike traditional beeswax and carnauba which can spoil and dirt. Black Bison Waxes can also be used as part of the patinating process for original finishes over time, Microcrystaline waxes such as Renaissance wax do not gilding, wood or sculpture. The wax is best applied with 0000 Steel Wool. Black Bison Wax Paste is available in six colours: cause future conservation problems and can be used in a broad range of applications. Flammable

101-600 Renaissance Wax 65ml £6.89 £8.26 515-600 Black Bison Wax: Clear 500ml £9.86 £11.83 101-610 Renaissance Wax 200ml £10.89 £13.06 515-610 Black Bison Wax: Dark Oak 500ml £9.86 £11.83 515-620 Black Bison Wax: Medium Oak 500ml £9.86 £11.83 515-630 Black Bison Wax: Georgian Mahogany 500ml £9.86 £11.83 515-640 Black Bison Wax: Victorian Mahogany 500ml £9.86 £11.83 515-650 Black Bison Wax: Antique Pine 500ml £9.86 £11.83 WAX & POLISH REMOVER Cleans and removes old layers of wax, grease, LIMING WAX dirt, and smoke without altering the patina. Can also be used to clean Ormolu. A rich paste wax formulated to give a white grained finish to open grain wood. May be applied to bare timber, but for a more dramatic result, stain the wood first. Before using, you Harmful can open the grain of the wood with the Bronze Hand Brush. Apply the paste with 0000 Steel Wool and fill the grain completely. After a few minutes, finish by waxing with Black Bison Wax - Clear, which will remove any excess Liming Wax and give a deep shine when buffed. Flammable 515-450 Wax & Polish Remover 500ml £9.70 £11.64 515-670 Liming Wax 250ml £9.63 £11.55

BEESWAX POLISH (PASTE) BLACK PATINATING WAX Traditional Beeswax / Turpentine wax polish as a clear paste. Ideal for use on absorbent wood where it has not been sealed; it will feed the wood and guard against Specially formulated black paste wax, ideal for patinating dryness. Also ideal to use on sculptures. When the polish has been applied, leave time mouldings, carvings and reproduction furniture, to create a for the Turpentine to evaporate and leave the wax as a residue; then buff up. black grained effect in wood, or to use on sculptures. Flammable Flammable 515-680 Black Patinating Wax 250ml £12.15 £14.58

VERDIGRIS WAX Verdigris Wax. Used in the same way as the Gilt Creams giving an excellent patina on wood, plaster, metals, etc. Gives an excellent effect when applied over a Gilt Varnish. 515-550 Beeswax Polish (Paste) 150ml £6.39 £7.66 Work the wax liberally on to the surface, using a stiff brush to force the wax into the detail. Allow to dry thoroughly and remove excess by rubbing with a cotton rag or extra fine BEESWAX POLISH (LIQUID) Steel Wool on larger areas. Finish by buffing vigorously with A clear liquid version of the traditional Beeswax a furniture or shoe brush. We recommend sealing afterwards / Turpentine polish. Can be painted on, making with Treasure Sealer or Renaisance Wax, particularly if the object is to be handled. it easy to apply to large areas. Flammable Flammable 515-690 Verdigris Wax 250ml £12.15 £14.58

515-560 Beeswax Polish (Liquid) 500ml £13.63 £16.35

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 83

catalogue2018a.p65 83 8/8/2018, 3:28 PM RETOUCH CRAYONS ORMOLINE METALLIC PAINT MEDIUM Wax pencils in ten assorted colours, all various wood finishes. Used to fill in small Cellulose based lacquer. Recommended for use with all bronze scratches, nail holes, wormholes etc. Just rub on the surface and leave to harden for powders to produce a hard-wearing finish on wood, metal, plaster short time before buffing. and paper (125gsm+). Flammable

517-840 Ormoline Metallic Paint Medium 60ml £5.53 £6.63 515-900 Retouch Crayons (tin of 10 assorted) £16.15 £19.38 517-841 Ormoline Metallic Paint Medium 250ml £13.42 £16.10 517-842 Ormoline Metallic Paint Medium 1 litre £33.92 £40.70 CARNAUBA WAX Produces a high gloss, hard wearing finish on the lathe or with the use of a buffing wheel, using the heat generated to melt a thin layer of wax onto the work. Apply ORMOLINE METALLIC PAINT THINNER sparingly and buff with a clean cloth Thinner for Ormoline Metallic Paint Medium and also cleans brushes; contains Toluene, flashpoint < 21ºC. Flammable

515-675 Carnauba Wax 40g £4.04 £4.84

PURE TURPENTINE Ideal for making up wax polishes, etc. Try equal parts of Turpentine and Beeswax; grate the 517-850 Ormoline Metallic Paint Thinners 60ml £6.63 £7.95 Beeswax into the Turpentine and leave 517-860 Ormoline Metallic Paint Thinners 250ml £13.42 £16.10 overnight. Turpentine is also useful as a 517-870 Ormoline Metallic Paint Thinners 1 litre £32.72 £39.26 smoothing agent for Chavant Clays.

Flammable

FINISHING OIL 102-200 Pure Turpentine 300ml £5.00 £6.00 A blend of high quality oils, resins and dryers which give a good resistance against water, alcohol and food acid marks; SEALERS & VARNISHES matt or satin finish according to the number of coats. For interior or exterior use. FINE LEMON SHELLAC FLAKES Harmful These flakes will make a dark shellac. Shellac flakes should be mixed into warm methylated spirits, and allowed to dissolve whilst being stirred. By adding more or less flakes, shellac can be made up to the desired thickness. We suggest a starting point of 250g of flakes to 1 litre of methylated spirits.

512-010 Lemon Shellac Flakes 250g £13.86 £16.63 512-020 Lemon Shellac Flakes 500g £23.82 £28.58 515-915 Finishing Oil 250ml £5.65 £6.78 TRANSPARENT SHELLAC / SPECIAL PALE FRENCH POLISH 515-916 Finishing Oil 500ml £8.98 £10.77 Prepared pale amber transparent shellac, made from the finest quality de-waxed shellac and suitable for most delicate work. Flammable PURE TUNG OIL A light golden brown, hardwearing and long lasting finish it is 512-050 Transparent Shellac 250ml £8.23 £9.87 ideal for use on food contact surfaces. Suitable for interior and 512-060 Transparent Shellac 1 litre £25.65 £30.78 exterior use. Can be thinned up to 50% with white spirit to aid penetration and when used as a base coat prior to application of finishing oil. WHITE SHELLAC / WHITE POLISH NOTE- Tung Oil is a nut extract and not suitable for those with A bleached French polish, milky white in colour. Gives a semi-matt finish. a nut allergy. Flammable 512-070 White Shellac 500ml £8.73 £10.47

SHELLAC FILLER STICKS Shellac sticks in ten assorted colours. Used to fill holes or make repairs prior to 512-830 Pure Tung Oil 500ml £11.55 £13.86 varnishing or French polishing. Melt down with a hot iron. Dries very hard and should be levelled down with fine abrasive paper.

515-910 Shellac Filler Sticks (Tin of 10 assorted) £26.07 £31.28

84 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018a.p65 84 8/8/2018, 3:35 PM EARTH PIGMENTS PAINTS & PIGMENTS High quality natural earth pigments, which can be mixed into casting materials (ciment fondu, plasters, etc), or used as a paint. (colours are an indication only) ACRYLIC COLOURS High quality acrylic water-based paint for general craft use and decorative painting. Provides opaque coverage on wood, artist’s canvas, plaster, clay, metal, fabric, bisque and many other materials. Permanent and non-toxic. Should unwanted colour get onto clothes, fabrics or work-surfaces, wash and rinse thoroughly with soap and water before colour dries. Once colour dries on fabric it is permanent.

Titanium white Yellow Ochre Red Ochre

Raw Sienna Burnt Sienna Umber (raw greenish)

521-101 Acrylic Paint: Blanc 59ml £1.28 £1.53 Raw Umber Burnt Umber Translucent 521-102 Acrylic Paint: Noir 59ml £1.28 £1.53 521-103 Acrylic Paint: Rouge 59ml £1.28 £1.53 Red Oxide 521-104 Acrylic Paint: Conifer Green 59ml £1.28 £1.53 521-105 Acrylic Paint: Canary Yellow 59ml £1.28 £1.53 521-106 Acrylic Paint: Vanilla Bean 59ml £1.28 £1.53 521-107 Acrylic Paint: Choc Brown 59ml £1.28 £1.53 521-108 Acrylic Paint: Blush Pink 59ml £1.28 £1.53 521-109 Acrylic Paint: Azure Blue 59ml £1.28 £1.53 Van Dyke Brown Ivory Black 521-110 Acrylic Paint: Raspberry 59ml £1.28 £1.53 521-111 Acrylic Paint: Royal Blue 59ml £1.28 £1.53 510-950 Earth Pigment: Titanium White 100g £4.93 £5.91 521-112 Acrylic Paint: Pumpkin 59ml £1.28 £1.53 510-952 Earth Pigment: Yellow Ochre 100g £4.93 £5.91 521-113 Acrylic Paint: Golden Sun 59ml £1.28 £1.53 510-954 Earth Pigment: Red Ochre 100g £4.59 £5.50 521-114 Acrylic Paint: Mocha 59ml £1.28 £1.53 510-956 Earth Pigment: Raw Sienna 100g £5.10 £6.12 521-115 Acrylic Paint: Dusty Rose 59ml £1.28 £1.53 510-958 Earth Pigment: Burnt Sienna 100g £6.12 £7.34 521-116 Acrylic Paint: Jungle Green 59ml £1.28 £1.53 510-960 Earth Pigment: Umber (Raw Greenish) 100g £5.10 £6.12 521-118 Acrylic Paint: Lush Pink 59ml £1.28 £1.53 510-962 Earth Pigment: Raw Umber 100g £5.10 £6.12 521-119 Acrylic Paint: Sage 59ml £1.28 £1.53 510-964 Earth Pigment: Burnt Umber 100g £5.10 £6.12 521-120 Acrylic Paint: Dark Red 59ml £1.28 £1.53 510-966 Earth Pigment: Translucent Red Oxide 100g £10.46 £12.55 521-121 Acrylic Paint: Lagoon 59ml £1.28 £1.53 510-968 Earth Pigment: Van Dyke Brown 100g £4.75 £5.70 521-122 Acrylic Paint: Seaspray 59ml £1.28 £1.53 510-970 Earth Pigment: Ivory Black 100g £4.76 £5.71 521-123 Acrylic Paint: Linen 59ml £1.28 £1.53 521-125 Acrylic Paint: Sanguine 59ml £1.28 £1.53 521-126 Acrylic Paint: Iris 59ml £1.28 £1.53 EARTH COLOURS 521-127 Acrylic Paint: Burnt Umber 59ml £1.28 £1.53 521-128 Acrylic Paint: Bahama Blue 59ml £1.28 £1.53 511-272 Earth Colour: Autumn Brown 400g £6.74 £8.09 521-130 Acrylic Paint: Wild Violet 59ml £1.28 £1.53 521-131 Acrylic Paint: Light Gray 59ml £1.28 £1.53 521-132 Acrylic Paint: Electric Blue 59ml £1.28 £1.53 511-274 Earth Colour: Blue 400g £6.67 £8.00 521-133 Acrylic Paint: Antique Gold 59ml £1.28 £1.53 521-134 Acrylic Paint: Deep Orange 59ml £1.28 £1.53 521-135 Acrylic Paint: Banana Yellow 59ml £1.28 £1.53 511-276 Earth Colour: Black 400g £6.47 £7.76 521-136 Acrylic Paint: Avocado 59ml £1.28 £1.53 521-138 Acrylic Paint: Amethyst 59ml £1.28 £1.53 521-139 Acrylic Paint: Pomegranate 59ml £1.28 £1.53 511-278 Earth Colour: Yellow 400g £5.34 £6.40 521-140 Acrylic Paint: Forest Green 59ml £1.28 £1.53 521-142 Acrylic Paint: Night Blue 59ml £1.28 £1.53 521-143 Acrylic Paint: Dark Gray 59ml £1.28 £1.53 511-280 Earth Colour: Red 400g £6.63 £7.95 521-144 Acrylic Paint: Latte 59ml £1.28 £1.53 521-145 Acrylic Paint: Blackberry 59ml £1.28 £1.53 521-146 Acrylic Paint: Flesh 59ml £1.28 £1.53 511-282 Earth Colour: Tundra 400g £6.79 £8.14 521-148 Acrylic Paint: Lavender 59ml £1.28 £1.53 521-149 Acrylic Paint: Sand 59ml £1.28 £1.53 521-150 Acrylic Paint: Cherry Red 59ml £1.28 £1.53 511-284 Earth Colour: Plum 400g £5.96 £7.15 521-151 Acrylic Paint: Spice Red 59ml £1.28 £1.53 521-152 Acrylic Paint: Burnt Sienna 59ml £1.28 £1.53 521-153 Acrylic Paint: Buttercup 59ml £1.28 £1.53 511-286 Earth Colour: Deep Buff 400g £7.67 £9.20 521-155 Acrylic Paint: Buttermilk 59ml £1.28 £1.53 521-156 Acrylic Paint: Cobalt Blue 59ml £1.28 £1.53 521-157 Acrylic Paint: Spring Green 59ml £1.28 £1.53 511-288 Earth Colour: Green 400g £7.45 £8.94 521-160 Acrylic Paint: Clay 59ml £1.28 £1.53 521-161 Acrylic Paint: Baby Blue 59ml £1.28 £1.53 521-162 Acrylic Paint: Periwinkle 59ml £1.28 £1.53 NOTE - Colours may vary between batches

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 85

catalogue2018d.p65 85 8/8/2018, 4:18 PM FLAT NYLON BRUSHES (SERIES 30) BRUSHES Nylon Flat brushes or One Stroke, ideal for shading, lettering and one-stroke work.

SABLE BRUSHES (SERIES 3) Soft Sable Brushes, with cedarwood polished handles and seamless metalled brass ferrules.

522-740 Flat Nylon Brush No.2 £1.66 £1.99 522-742 Flat Nylon Brush No.4 £1.83 £2.19 522-744 Flat Nylon Brush No.6 £2.01 £2.41 522-746 Flat Nylon Brush No.8 £2.21 £2.65 522-748 Flat Nylon Brush No.10 £2.72 £3.26 522-750 Flat Nylon Brush No.12 £3.27 £3.92

MASTERSTROKE ROUND BRUSHES (SERIES 60) Masterstroke Round brushes; full bodied to give accuracy and control, with fine point for detailed work.

522-600 Masterstroke Round Brush No.000 £1.66 £1.99 522-602 Masterstroke Round Brush No.0 £1.66 £1.99 000 00 0 1 2 3 4 5 6 7 522-604 Masterstroke Round Brush No.2 £1.87 £2.24 522-606 Masterstroke Round Brush No.4 £2.21 £2.65 522-608 Masterstroke Round Brush No.6 £2.52 £3.02 522-300 Sable Brush No.000 £2.59 £3.10 522-610 Masterstroke Round Brush No.8 £3.27 £3.92 522-305 Sable Brush No.00 £2.72 £3.26 522-310 Sable Brush No.0 £3.06 £3.67 522-315 Sable Brush No.1 £3.53 £4.23 MASTERSTROKE FILBERT BRUSHES (SERIES 61) 522-320 Sable Brush No.2 £4.08 £4.89 Masterstroke brushes; Filbert, also known as Cats Tongue, are used on the side for 522-325 Sable Brush No.3 £4.72 £5.66 detail work, and on the broader side for shading. 522-330 Sable Brush No.4 £6.08 £7.29 522-335 Sable Brush No.5 £8.33 £9.99 522-340 Sable Brush No.6 £12.07 £14.48 522-345 Sable Brush No.7 £16.11 £19.33 522-620 Masterstroke Filbert Brush No.2 £2.21 £2.65 522-622 Masterstroke Filbert Brush No.4 £2.51 £3.01 522-624 Masterstroke Filbert Brush No.6 £3.27 £3.92 SQUIRREL BRUSHES (SERIES 6) Pure squirrel brushes with polished handles and aluminium ferrules. MASTERSTROKE SHADER BRUSHES (SERIES 62) Masterstroke Flat brushes or One Strokes, ideal for shading, lettering and one-stroke work. Similar to Series 30, but thinner and more delicate.

522-640 Masterstroke Shader Brush No.0 £1.87 £2.24 522-642 Masterstroke Shader Brush No.2 £2.21 £2.65 522-644 Masterstroke Shader Brush No.4 £2.51 £3.10 522-646 Masterstroke Shader Brush No.6 £3.27 £3.92 522-648 Masterstroke Shader Brush No.8 £3.78 £4.53 522-650 Masterstroke Shader Brush No.10 £4.21 £5.05

MASTERSTROKE ANGLED BRUSHES (SERIES 63) 00 0 1 2 3 4 5 6 7 8 Masterstroke Flat brushes cut at an angle. Ideal for leaves, petals and similar work. 522-400 Squirrel Brush No.00 £1.49 £1.78 522-405 Squirrel Brush No.0 £1.57 £1.88 522-410 Squirrel Brush No.1 £1.66 £1.99 522-415 Squirrel Brush No.2 £1.83 £2.19 522-420 Squirrel Brush No.3 £2.12 £2.54 522-660 Masterstroke Angled Shader Brush 3mm (1/8") £1.87 £2.24 522-425 Squirrel Brush No.4 £2.38 £2.85 522-664 Masterstroke Angled Shader Brush 6mm (1/4") £2.51 £3.01 522-430 Squirrel Brush No.5 £2.76 £3.31 522-666 Masterstroke Angled Shader Brush 10mm (3/8") £3.27 £3.92 522-435 Squirrel Brush No.6 £3.23 £3.87 522-440 Squirrel Brush No.7 £4.00 £4.80 522-445 Squirrel Brush No.8 £4.63 £5.55 PROLENE RIGGER BRUSHES (SERIES 103) Prolene Riggers with short handles. Ideal for painting long thin lines. PROLENE LINER BRUSHES (SERIES 9) Prolene Liners hold a lot of medium for making long, clean lines. Ideal for lettering. 522-692 Prolene Rigger Brush No.1 £2.68 £3.21 522-694 Prolene Rigger Brush No.2 £2.81 £3.37 522-696 Prolene Rigger Brush No.3 £3.14 £3.76 522-680 Prolene Liner Brush - Extra Fine £3.19 £3.82 522-682 Prolene Liner Brush - Fine £4.55 £5.46 522-684 Prolene Liner Brush - Medium £6.00 £7.20 522-686 Prolene Liner Brush - Large £7.82 £9.38

86 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018d.p65 86 8/8/2018, 4:25 PM PROLENE SPOTTER BRUSHES (SERIES 107) HAKE BRUSHES Model makers spotting brushes. Traditionally made by sewing the hair into a split in the wood with no metal ferrule, thus avoiding the issue of rust or contamination, ideal for the application of patinating treatment like Cupra or Antiquing Fluid. 522-760 Prolene Spotter Brush No.0000 £2.31 £2.77 522-764 Prolene Spotter Brush No.00 £2.48 £2.97 522-768 Prolene Spotter Brush No.1 £2.72 £3.26

GENERAL PURPOSE MOPS (SERIES 320) General purpose mops, which hold a lot of liquid.

522-710 General Purpose Mop - Medium £5.64 £6.76 522-770 Hake Goat Hair Brush 25mm x 30mm (1") £5.10 £6.12 522-715 General Purpose Mop - Large £8.64 £10.36 522-772 Hake Goat Hair Brush 40mm x 30mm (1½") £5.27 £6.32 522-774 Hake Goat Hair Brush 50mm x 30mm (2") £6.71 £8.05 522-776 Hake Goat Hair Brush 75mm x 30mm (2½) £9.77 £11.72 STENCIL BRUSHES (SERIES SB) Round brushes with medium hair length, for stencilling and scrubbing colour into fabrics and other sub strata. PEWTER SHEET & MET AL FOILS

PEWTER SHEET 522-720 Stencil Brush - Small £1.66 £1.99 Pewter sheet, in 21G (0.80mm). Sheet size 30cm x 61cm (12" x 24") 522-722 Stencil Brush - Medium £1.87 £2.24 522-724 Stencil Brush - Large £2.25 £2.70 802-500 Pewter Sheet 21G (0.80mm) 30cm x 61cm £61.20 £73.44 522-726 Stencil Brush - Extra Large £3.06 £3.67

METAL FOILS LARGE STENCIL BRUSHES Round brushes with medium hair length and short round wooden handles. SOFT COPPER FOIL & SOFT ALUMINIUM FOIL Soft copper foil 0.1mm (.004") thick, in rolls 165mm (6½") wide x 1 metre. Soft Aluminium Foil 0.1mm (.004") thick, in rolls approx 300mm (12") x 1 metre.

522-730 Stencil Brush No.16 (w 28mm) £4.76 £5.71 522-732 Stencil Brush No.20 (w 35mm) £7.56 £9.07 802-600 Soft Copper Foil, 165mm x 0.1mm x 1m £9.16 £10.99 522-734 Stencil Brush No.24 (w 40mm) £11.05 £13.26 802-610 Soft Copper Foil, 165mm x 0.1mm x 5m £30.47 £36.56

BAMBOO BRUSHES large medium

small

802-650 Soft Ali. Foil approx. 300mm x 0.1mm x 1m £8.34 £10.00 806-456 Large Bamboo Brush 24cm (9.5") £2.82 £3.38 802-655 Soft Ali. Foil approx. 300mm x 0.1mm x 5m £24.94 £29.92 806-454 Medium Bamboo Brush 24cm (9.5") £2.93 £3.51 806-452 Small Bamboo Brush 20cm (8") £2.33 £2.79 see also BRASS FENCING (page 66)

HOGS HAIR FITCHES In plain wood handles. No.2 is round, Nos 4, 6, 8 and 10 are flat.

522-500 Hogs Hair Fitch No.2 £1.20 £1.44 522-505 Hogs Hair Fitch No.4 £1.34 £1.60 522-510 Hogs Hair Fitch No.6 £1.45 £1.74 522-515 Hogs Hair Fitch No.8 £1.79 £2.14 522-520 Hogs Hair Fitch No.10 £2.32 £2.78

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 87

catalogue2018d.p65 87 8/8/2018, 4:33 PM ADHESIVES ARALDITE ARALDITE STANDARD CYANOACRYLATE Epoxy adhesive for permanent bonding.Heavy duty adhesive for all kinds of repairs - sticks metals, earthenware, china, rubber, glass, leather, wood, most hard plastics and other everyday materials. At room temperature remains usable for about 2 hours; full cure in 1-3 days. Cure can be heat accelerated. Two pack system - resin and hardener. Irritant

PROCURE INSTANT BONDING CYANOACRYLATE ADHESIVES Very fast curing Cyanoacrylate Adhesives (formerly Tufloc) with various setting speeds and viscosities to suit most applications. Not to be used on oily or greasy surfaces 409-600 Araldite Standard (Twin Tube pack) £5.88 £7.05 where wetting could be a problem, or for permanent glass bonding. Technical Sheet and Safety Data Sheets available on request. ARALDITE RAPID Bonds in minutes - metals, ceramics, jewellery, rubber, glass, leather, wood, and other PC01 CYANOACRYLATE ADHESIVE everyday materials. Sets in about 10 minutes at room temperature, ½ to 1 hour before A medium viscosity superfast adhesive developed to bond porous, acidic and inactive rough handling; full strength is reached in about 8 hours. surfaces quickly and permanently. Typical applications include ceramics, aluminium, Irritant fabrics, plated metals, hardwood, leather goods and other acidic surfaces. Very fast setting, viscosity 100-120 cPs. In 20g bottles. Irritant

409-670 PC01 Cyanoacrylate Adhesive 20g £3.13 £3.75

PC06 CYANOACRYLATE ADHESIVE A low viscosity superfast curing adhesive developed specifically for previously difficult to bond surfaces. Typical applications include EPDM and SBR rubber components, polypropylene and insulating materials, seals and 'o' rings and elastomeric materials. 409-630 Araldite Rapid (Twin Tube pack) £6.96 £8.35 Very fast setting, viscosity 10-30 cPs. In 20g bottles. Irritant ARALDITE 2020 EPOXY RESIN ADHESIVE 409-675 PC06 Cyanoacrylate Adhesive 20g £3.13 £3.75 (XW396/XW397). Low viscosity water white adhesive, especially suitable for glass and ceramic bonding, but also excellent for quartz, precious stones, aluminium, mild PC16 CYANOACRYLATE ADHESIVE steel, stainless steel and copper. Also suitable for clear castings and laminates. Refractive A high viscosity instant adhesive with good impact resistance. Specifically developed index similar to glass. At 23ºC, usable life of 100gm about 45 minutes; lap shear for metal to metal bonding as well as irregular shaped or porous components. Ideal for strength on aluminium 1N/nm² 16 hours, 10N/nm² 24 hours; 10N/nm² at 60ºC 2¼ gap filling. Typical applications include engineering, jewellery, parts subject to vibration hours. Supplied in a 500g kit with two mixing beakers, two plastic pipettes, mixing and loudspeaker manufacture. Suitable for gap filling. Medium fast setting. In 20g sticks and instruction booklet. bottles. Corrosive Irritant

409-680 PC16 Cyanoacrylate Adhesive 20g £3.14 £3.76

DN3218 RIGID DISPENSING NOZZLE Throw away nozzle which fits over the nozzle on the bottle and allows minute amounts of adhesive to be accurately placed.

409-685 DN3218 Rigid Dispensing Nozzle £0.59 £0.70 409-650 Araldite 2020 Epoxy Resin Adhesive Kit 500g £58.28 £69.93

ARALDITE INSTANT CLEAR PC750 ACTIVATOR FOR CYANOACRYLATE A fast setting clear epoxy adhesive with resealable cap, suitable for a variety of A surface activator to assist the reaction or speed cure time. Increases bond strength on applications including leather, wood, card, ceramics, glass, most plastics and fabrics. porous and acidic surfaces. Apply Activator to one surface and allow to dry. This may Sets in around 90 seconds at room temperature. Supplied in a 24ml syringe pack be done in multiples as long as items will be glued within 30 minutes. Apply adhesive to other surface and assemble accurately using hand clamping pressure. Hold together Irritant until bonded (normally 5-60 seconds depending on surface). Supplied in 200ml aerosol can. Harmful

409-692 PC750 Cyanoacrylate Activator 200ml £6.68 £8.01

PC68 DEBONDER FOR CYANOACRYLATE To penetrate and soften cyanoacrylate adhesives to allow disassembly of components and excess adhesive removal. Not for use on the skin. In 20ml bottles.

Harmful 409-645 Araldite Instant Clear (Syringe pack) £10.81 £12.97

409-697 PC68 Cyanoacrylate Debonder 20ml £4.78 £5.73 see also MILLIPUT & GREEN STUFF (page 47)

88 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018d.p65 88 8/8/2018, 4:35 PM With over 40 years experience working with modelmakers and hobbyists we are proud to introduce a range of world class modelling products from Deluxe Materials. As both chemists and modellers Deluxe Materials are passionate about finding new and better solutions to modelling tasks and creating new formulations to meet consumer demands for environmentally safe products. FOAM ARMOUR Creates a hard and durable surface layer on Foam and wood. PLASTIC MAGIC Ideal for scenics, model aircraft etc. A thick Bonds plastics other glues cannot. Deluxe water based resin that sets to produce an Materials new formula Plastic Magic is a liquid attractive, durable, scratch resistant coating solvent glue that produces invisible glue lines. on foam to prevent dings, wear and The new safer formula can be applied with a disintegration. It dries to a surface that can fine paint brush. Plastic Magic bonds nearly all be painted and glued easily and will reduce commonly used modelling plastics including damage polyester, acrylic, styrene, ABS, PVC, butyrate - Easy to apply and polycarbonates. - Seals surfaces, gaps and foam edges to prevent disintegration - Can be over-coated or mixed with acrylic paint. - Is glued easily - Bonds electrostatic grass and scatter materials as it dries. 516-200 Plastic Magic 50ml £5.20 £6.24 250g pot covers 0.7m² / 7sqft.

PERFECT PLASTIC PUTTY Fills fine gaps. Creates invisible seams. Water clean up. Perfect Plastic Putty is a one-part, fast drying, superfine filler with good adhesion and sanding properties on plastic. Easily used, even in awkward areas with water clean up. Apply with a small spatula or modelling tool, smooth 516-202 Foam Armour 250g £7.82 £9.38 and allow to dry. Perfect Plastic Putty: Dries quickly without cracks to an ultra smooth SMART PLASTIC finish Heat mouldable modelling plastic. Melt & Fills deep cavities and takes paint easily. then mould in your hand. Can be used Low odour for rapid building of small scale armatures, temporary mould jackets/cases, press mouldings and general modelling projects.

- Soften beads in hot water until translucent. - Press together with fingers. - Can be re-softened many times over. - Plastic is strong and durable when cold.

Step 1: Apply putty to Step 2: Smooth putty Step 3: Blend in or add area for filling with a finger or texture by working the spatula dried putty with modelling tools. The Surface will now be ready for colour matching with paint

516-201 Perfect Plastic Putty 40g £5.68 £6.81 516-203 Smart Plastic 125g £11.75 £14.10

BRUSH MAGIC STRIP MAGIC Fast acting brush cleaner. Restores & revives A fast acting, spreadable and controllable paint brushes like new. Water miscible. No odour. stripper that will soften and remove paints and Non-flammable. primers. Non-flammable. Safe for health & the Safe for health and the environment. environment.

516-205 Brush Magic 125ml £8.03 £9.63 516-204 Strip Magic 125ml £8.51 £10.21

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 89

catalogue2018d.p65 89 8/8/2018, 4:38 PM OTHER RESTORATION & CRAFT KNIVES

FINISHING PRODUCTS SWANN-MORTON SURGICAL HANDLES & BLADES Not for Sale to anyone under the age of 18 A range of 5 solid nickel handles and 16 carbon steel blades. The blades are packed in LOW FIRE GLAZE & THINNERS fives in a metal foil pack, VPI protected. Boxes of 100 blades are also available across A non-yellowing acrylic based glaze specifically for ceramic restoration and painting. the whole range (20 x foil packs of 5). Fires normally at 120ºC for 30 minutes, but can be fired at 160ºC for maximum durability and adhesion. Up to 25% by volume of thinners may be added for spraying. SWANN-MORTON SURGICAL HANDLES The thinners also act as a brush cleaner. May be coloured with Artist quality alkyd oil Handles 3, 7 and 3L take blades 10, 10A, 11, 12, 15, 15A. paints. Low Fire Glaze can also be used on metal. Low Fire Glaze has a six months Handles 4 and 4L take blades 20, 21, 22, 22A, 23, 24, 25, 25A, 26, 27 shelf life. Flammable Harmful No.4L 408-760 Low Fire Glaze 500ml £15.82 £18.98 No.3L 408-810 Low Fire Glaze Thinners 500ml £9.00 £10.80

ROTTENSTONE One of the finest abrasives used in wood finishing. Also used for distressing gilding, and it has the colour and feel of real dust and so it can be used imaginatively in distressing and antiquing.

515-790 Rottenstone 500g £8.42 £10.10

HAND BRUSHES No.7 BRONZE HAND BRUSH Useful to clean mouldings, castings, etc. Ideal also for initial cleaning of white metals. Approximately 122mm x 38mm (4¾" x 1½"), bristles about 25mm (1") long.

No.4 516-050 Bronze Hand Brush £13.41 £16.09 No.3 BRASS HAND BRUSH This has a 292mm (11½") long handle, with brass bristle area 130mm x 16mm (5¼" x 5/8"), bristles approximately 25mm (1") long.

516-060 Brass Hand Brush £6.91 £8.29

STAINLESS STEEL HAND BRUSH Small hand brush, bristle area 60mm x 7mm (2½" x ¼"), 15mm (5/8") long.

516-070 Stainless Steel Hand Brush £8.93 £10.71

STEEL WOOL Grades 0000, 00, and 0. Outstanding quality steel wool. The use of long, top-quality steel wire to create long strands of highly crumble resistant wool, and state-of-the-art machinery to lay the strands parallel, creates a continuous band of consistent strand- thickness wool, allowing it to be packed in neat rolls from which the required amount can be cut off. The steel wool is capable of excellent liquid retention for the use of spreading strippers, solvents and cleaners evenly; it is also virtually oil free.

516-100 Steel Wool Grade 0000, 250g £4.86 £5.83 516-110 Steel Wool Grade 00, 250g £4.86 £5.83 516-120 Steel Wool Grade 0, 250g £4.86 £5.83

Useful hints: Cut to length with shears and use gloves when working. Make sure the strands of steel wool pads lie along the line of work. When using cleaners and solvents, try out in an inconspicuous place first. Never use steel wool on ormolu. When polishing metals, lubricate steel wool with soapy water or another appropriate lubricant. 701-010 No.3 Swann-Morton Handle £2.46 £2.95 Grade 0000: for delicate cleaning of metal and glass; polishing metals; applying wax 701-020 No.3L Swann-Morton Handle £6.12 £7.34 polishes; cutting down intermediate coats of French polish and lacquers; polishing cold 701-030 No.4 Swann-Morton Handle £2.46 £2.95 cast resin metals. 701-040 No.4L Swann-Morton Handle £6.12 £7.34 701-050 No.7 Swann-Morton Handle £5.25 £6.30 Grades 00 and 0: as for 0000, but for heavier work; cleaning suede, marble, tiles. Use Liberon Wax & Polish Remover to clean surfaces thoroughly between stripping and see blades overleaf resurfacing.

90 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018d.p65 90 8/8/2018, 4:40 PM SWANN-MORTON SURGICAL BLADES SWANN-MORTON TRIMAWAY Throw-away knife with a strong plastic handle fitted with heavy duty No.25A surgical blade.

Not for sale to anyone under the age of 18

Not shown to size.

10 10A 11 12 15 15A

To fit No.3, No.7 and No.3L Handles 701-500 Swann-Morton Trimaway Knife (1) £0.56 £0.67 701-510 Swann-Morton Trimaway Knives (Box of 50) £18.71 £22.45 701-100 No.10 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-110 No.10 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-120 No.10A Swann-Morton Surgical Blades (5) £0.67 £0.80 SWANN-MORTON BLADE REMOVER UNIT (BRU) 701-130 No.10A Swann-Morton Surgical Blades (100) £10.81 £12.97 Removes and stores Swann-Morton blades from 701-140 No.11 Swann-Morton Surgical Blades (5) £0.67 £0.80 both No.3 and No.4 sized handles, with a capacity 701-150 No.11 Swann-Morton Surgical Blades (100) £10.81 £12.97 to hold up to 100 blades. Ideal for less than confi- 701-160 No.12 Swann-Morton Surgical Blades (5) £0.67 £0.80 dent blade users and those requiring a safe way to 701-170 No.12 Swann-Morton Surgical Blades (100) £10.81 £12.97 dispose of used/contaminated blades. 701-180 No.15 Swann-Morton Surgical Blades (5) £0.67 £0.80 Blades are removed by simply placing the blade in 701-190 No.15 Swann-Morton Surgical Blades (100) £10.81 £12.97 the side of the unit, presing down and pulling the 701-192 No.15A Swann-Morton Surgical Blades (5) £0.67 £0.80 handle, the blade is safely removed and placed 701-194 No.15A Swann-Morton Surgical Blades (100) £10.81 £12.97 securely inside the unit.

20 24

21 25 701-405 Swann-Morton Blade Remover Unit (BRU) (1) £0.87 £1.04 701-410 Swann-Morton Blade Remover Unit (Box of 10) £7.41 £8.89

22 25A

22A 26 Swann-Morton Blades box of 100

STANLEY KNIVES 23 27 STANLEY KNIFE 99E (RETRACTABLE) To fit No.4, No.4L Handles General purpose retractable knife with replaceable blades. Supplied with 5 heavy duty 701-200 No.20 Swann-Morton Surgical Blades (5) £0.67 £0.80 blades Type 1992. 701-210 No.20 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-220 No.21 Swann-Morton Surgical Blades (5) £0.67 £0.80 Not for sale to anyone under the age of 18. 701-230 No.21 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-240 No.22 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-250 No.22 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-260 No.22A Swann-Morton Surgical Blades (5) £0.67 £0.80 701-270 No.22A Swann-Morton Surgical Blades (100) £10.81 £12.97 701-280 No.23 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-290 No.23 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-300 No.24 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-310 No.24 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-320 No.25 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-330 No.25 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-340 No.25A Swann-Morton Surgical Blades (5) £0.67 £0.80 701-350 No.25A Swann-Morton Surgical Blades (100) £10.81 £12.97 701-360 No.26 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-370 No.26 Swann-Morton Surgical Blades (100) £10.81 £12.97 701-380 No.27 Swann-Morton Surgical Blades (5) £0.67 £0.80 701-390 No.27 Swann-Morton Surgical Blades (100) £10.81 £12.97

Blades shown approximately to size

704-020 Stanley Knife 99E (Retractable) £7.59 £9.10 704-050 Stanley Blades 1991 Standard (5) £1.69 £2.02 704-060 Stanley Blades 1992 Heavy Duty (5) £1.67 £2.00

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 91

catalogue2018d.p65 91 8/8/2018, 4:45 PM SUNDRIES & HEAL TH & SAFETY HEALTH & SAFETY EQUIPMENT / MA TERIALS

RESPIRATORS

A range of Respirators to cover most of the materials we sell 601-120 5500-30S Half Mask Respirator - Small £20.81 £24.97 Giving protection against Dusts, Gases and Vapours (the latter two must have a 601-130 5500-30M Half Mask Respirator - Medium £20.81 £24.97 detectable odour). How long will they last? This depends on which one you have. The 601-140 5500-30L Half Mask Respirator - Large £20.81 £24.97 effective life of the respirator depends upon the nature and concentration of the sub- Filter Cartridges should be ordered separately. stance concerned. You get what you pay for; the higher up the range, the longer the protection. You will know when a respirator is exhausted: 8822 VALVED DUST / MIST RESPIRATOR Protection against fine dusts, fibres and aqueous mists. Maximum usage level 12 x Dusts: breathing will become laboured. Respirators should always be disposed of Occupational Exposure Limit (OEL), Standard: EN 149 FFP2S. Approval: Conforms when breathing becomes difficult due to build-up on the filter. to HSE Approved Standard.

Gases & Vapours: you will detect odour in the respirator - ‘breakthrough’. Substances should have good warning properties, e.g. taste or smell, and the respirator should be disposed of immediately when breakthrough is detected.

Respirators should not be used in hazard concentrations which are immediately dan- gerous to life or health (IDLH). They should only be used in well ventilated areas (minimum 19.5% oxygen). 3M 8822 Valved Dust Respirator 3M 9913 Nuisance Odour Respirator

HONEYWELL FILTER CARTRIDGES 601-180 8822 Valved Dust / Mist Respirator (1) £2.93 £3.51 Formerly James North,The information on Occupational Exposure Levels (OEL) and 601-182 8822 Valved Dust / Mist Respirator (10) £23.43 £28.11 Time Weighted Average (TWA) is correct at the time of going to press. These may change from time to time. 9913 NUISANCE ODOUR RESPIRATOR Protection against dusts, mists, unpleasant smells and nuisance levels of organic ORGANIC VAPOUR FILTER CARTRIDGE vapour. Maximum usage level 4 x Occupational Exposure Limit (OEL) - dusts and N7500-1U Organic Vapour Filter Cartridge mists. Below Occupational Exposure Limit (OEL) - organic vapours. Standard: Colour - Brown. Conforms to A1 level protection as EN 149 FFP1S. Approval: Conforms to HSE Approved Standard. double filter. (Proposed CEN standards.) Currently rated 4 x OEL / TWA. 601-290 9913 Nuisance Odour Respirator (1) £5.21 £6.25 601-300 9913 Nuisance Odour Respirator (10) £43.05 £51.66 DUST FILTER CARTRIDGE N7500-8U High Efficiency Particulate Filter Cartridge. Colour - White. For highly toxic particulates, Dust, Fumes, EYE PROTECTION Mists and Radio-nucleides. Conforms to BS.4555 as double filter and to P3 level of protection as double filter. WIDE VISION IMPACT GOGGLES (Proposed CEN standards). Currently rated 20 x OEL Light, strong and comfortable, with a wide field of vision, these goggles can be worn in / TWA. combination with a respirator, or over most types of spectacles. Approved for dust and chemical atmospheres. Made with polycarbonate lens conforms to EN166, for protec- ORGANIC VAPOUR / DUST FILTER CARTRIDGE tion against chipping, grinding, handtools and machine operation, as well as molten N7500-81U High Efficiency Organic Vapour & Dust metals. Two versions available - one being Anti-Mist, the other for molten metals. Filter Cartridge. Colour - White / Brown. Conforms to BS.2091 as a double filter and A1, P3 level of protection as double filter. (Proposed CEN standards.) For toxic and hazardous particulates. Currently rated Organic Vapour 4 x OEL / TWA, Particulates 20 x OEL / TWA.

601-098 1U Filter Cartridge (A1 Organic Vapours) (1 pair) £7.04 £8.44 601-103 8U Filter Cartridge (P3 Dusts) (1 pair) £12.95 £15.54 601-110 81U Filter Cartridge (A1/P3 Dusts/Vapour) (1 pair) £23.13 £27.75 601-010 Goggles for Molten Metal £4.54 £5.44 601-020 Goggles Anti-mist £6.76 £8.11 NORTH 5500 SERIES HALF MASKS WRAP-AROUND EYESHIELD The 5500 series is the optimum Low Maintenance respirator combining the comfort and fit of a reusable respirator while approaching the economy of a disposable. The low Clear Polycarbonate one-piece moulded lens profile allows protective eyewear to be worn, and low inhalation and exhalation resist- conforms to EN166. Lightweight with comfort ance reduces user’s fatigue. and safety; can be worn over prescription lenses. The wrap around design and Browshield The extremely soft hypoallergenic elastomer facepiece incorporates good anatomic ensure excellent frontal and lateral protection. design and conforms gently to the user’s face. The cradle suspension system of the straps adds comfort and provides correct positioning for an even seal. 601-050 Wrap-Around Eyeshield £3.22 £3.86

Contoured sealing flange makes a comfortable mask, giving excellent fit, eliminating EYE WASH BOTTLES pressure points. Extended side flanges provide best possible seal during talking and It is important to have sterile saline water solution available wherever resins, silicones other facial motions. Three overlapping sizes provide the most comfortable fit for the and many other materials are used. Bottles should be replaced once opened or out of largest number of wearers. Direct cartridge to facepiece seal eliminates the risk of date. improper seal and reduced protection due to lost or worn gaskets. 601-080 Eye Wash Bottle - Sterile Saline Solution £5.73 £6.87

92 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018d.p65 92 8/8/2018, 4:48 PM HYGIENE & CLEANING MIXING & MEASURING COTTON CANVAS APRONS Hardwearing and durable cotton canvas aprons CALIBRATED MIXING BEAKERS Polypropylene beakers marked in ml. with bib and tie strings, featuring two side and The largest is nearly 1.2 litre capacity one centre pocket for modelling tools etc. Ideal clearly marked in 50ml graduations up for protecting cloths in the classroom, workshop to 900ml; a lid is also available if re- or studio. quired. With care, beakers can be used several times, particularly with silicones. Use to weigh out any liquid 602-000 Cotton Canvas Apron (one size) £6.39 £7.66 by volume using specific gravity (SG) - see below. APRONS Very cheap, disposable plastic aprons with bib and tie strings, to protect the front of your clothing when using messy materials! In packets of 10 or 100. 409-110 Calibrated Beaker 30 ml £0.15 £0.18 409-120 Calibrated Beaker 50 ml £0.33 £0.40 602-010 Disposable Aprons (Pack of 10) £1.48 £1.77 409-125 Calibrated Beaker 225 ml £0.44 £0.52 602-020 Disposable Aprons (Pack of 100) £9.38 £11.25 409-140 Calibrated Beaker 900 ml £0.63 £0.75 10 + less 10% discount DISPOSABLE GLOVES 100 + less 20% discount (discount only available on quantity of same size beaker) Polythene Gloves Loose fitting polythene gloves; will fit either hand. One size only, wrist length. 409-142 Lid for 900ml Beaker £0.15 £0.18 10 + less 10% discount 602-050 Polythene Gloves 50 pairs £1.43 £1.71 100 + less 20% discount

Vinyl Gloves OTHER MIXING & MEASURING EQUIPMENT Close fitting vinyl disposable gloves, ambidextrous and seamless. Economical enough to use as disposable and tough enough for re-use. In four sizes: small, medium, large DIGITAL SCALE and extra-large, each in packets of 5 pairs or Dispenser Boxes of 50 pairs. A small battery operated digital scale useful for measuring out silicones and 602-100 Vinyl Gloves - Small (5 pairs) £1.06 £1.27 resins, weighs a maximum of 5kg in 602-110 Vinyl Gloves - Small (50 pairs) £5.74 £6.88 increments of 1g (units can be changed 602-130 Vinyl Gloves - Medium (5 pairs) £1.06 £1.27 to lb) with a weighing platform 10cm in 602-140 Vinyl Gloves - Medium (50 pairs) £5.74 £6.88 diameter, the perfect fit for our 900ml 602-160 Vinyl Gloves - Large (5 pairs) £1.06 £1.27 beaker. Other features include zero and 602-170 Vinyl Gloves - Large (50 pairs) £5.74 £6.88 tare function. supplied with batteries. 602-190 Vinyl Gloves - Extra-large (5 pairs) £1.25 £1.50 602-200 Vinyl Gloves - Extra-large (50 pairs) £6.83 £8.19 409-240 Digital Scale £9.23 £11.07 STOCKINETTE In approximately 400g rolls. For general cleaning and polishing. RED POLYTHENE MIXING BOWL A plain polythene mixing bowl, 450ml 602-300 Stockinette 400g Roll £3.16 £3.79 capacity. It is possible to clean uncured resin from PR88 HAND PROTECTION CREAM polythene bowls. A skin protection cream which, when applied before work, protects skin against dirt and many chemical substances. It washes off after work using water only. It protects and conditions the skin at the same time and has a pleasant almond smell. The cream offers protection against oil, fat, grease, dirt, oxides, soot, paints, inks, varnishes, glues, 409-150 Red Polythene Mixing Bowl 450ml £0.75 £0.90 adhesives, resins, fibreglass, polyester pastes - almost any substance which is not water based. Once dry (1 or 2 minutes), it will not feel greasy - you may even find you PLASTIC MIXING SPATULA actually have better grip; and it will not transfer to other material. In fact, it can prevent Well designed mixing spatula with feather edges. This spatula is excellent for using with fingerprints appearing where they are not wanted, on surfaces to be polished, for plastic and rubber bowls and mixing beakers. Do not use with resins. example. Available in two sizes:

409-160 Plastic Mixing Spatula £1.65 £1.98

602-401 PR88 Hand Protection Cream 100ml £2.74 £3.28 MIXING STICKS 602-402 PR88 Hand Protection Cream 1 litre £9.21 £11.05 Flat spatula wooden mixing sticks, approximately 148mm x 18mm (6" x ¾"). HAND CLEANSER A heavy duty hand cleanser in a yellow gel form with polyurethane beads to aid the removal 409-170 Mixing Sticks (pack of 10) £0.78 £0.91 of ingrained soil and contamination. Contains 409-180 Mixing Sticks (box of 100) £2.49 £2.98 citrus solvents for powerful but safe removal of 10 + less 10% discount £2.24 £2.69 all heavy duty soiling including printing inks, epoxy resin and paints. Formulated for really SYRINGE BODIES tough jobs, it will effortlessly remove the most Side tip syringe bodies, 5ml graduated in stubborn contaminants leaving hands really 0.5ml divisions, 20ml in 2ml divisions. clean. Plastic with rubber fittings on the plunger.

409-200 Side Tip Syringe Body 5ml £0.23 £0.27 602-412 Hand Cleanser 500g £4.75 £5.70 409-205 Side Tip Syringe Body 20ml £0.39 £0.46

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 93

catalogue2018d.p65 93 8/8/2018, 4:53 PM buffing mops 71 fillite 69 K burnishers, agate 78 finishing oil 84 Index burnishing clay 78 flexcut 14 ka low melt alloy 72 burs & cutters 27 foam armour 89 kidney scrapers 56 bush hammers 22 foam brushes 89 kidneys, rubber 51 A busks. See scrapers, flexible steel formula 5 release agent 64, 65 kilns 39 knives 54 abrasive cloth 26 bust pegs 35 french chalk 73 abrasive waterproof paper 26 C G L acetone 71 ladles 73 acrylic colours 85 cabinet scrapers 17 g26 urethane resin 70 laminating brushes 71 acrylic conformal coating 71 calipers 35 g4 sealer / varnish 62 latex 65 acrylic gold size 77 carvers’ bench screw 16 galvanised wire 34 latex thickener 65 adhesives 88 carvers' chops 16 gelflex melting pots 62 lead free pewter 72 adzes 13 carving stands 31 gilders’ clay 78 lettering chisels 20 agate burnishers 78 casting slips 46 gilders’ knife 78 liming wax 83 alabaster knife 67 centricast 74 gilders’ whiting 78 lino cutting knives 13 alcohol burner 55 chavant sculpting clay 47 gilt cream 80 liquid hardener 68 alginate 65 chopped strand mat 68 gilt varnish 80 liquid leaf 79 alloy 73 chops 16 glass fibre 68 low fire glaze 90 aluminium expanded mesh 35 ciment fondu 67 glaze & body stains 44 low fire glazes 40 aluminium foil 87 claw bit holders & claw bits 18 glaze, crystals 42 lump hammers 22 aluminium leaf 77 clay 46 glaze, low fire 40 aluminium wire 34 clay cutters 52 glaze, stoneware 41 M amber rosin 49 clay gun 48 glaze, underglaze 43 ambersil pur400 65 clay rollers 37 gloves, disposable polythene & mallets 22 antiquing fluid 80 clay shapers 51 vinyl 93 manual extruders 37 aprons 93 claydium 47 glue 88 marble fillers 69 araldite 88 clear casting resin 67 goggles 92 melinex foil 71 arkansas bench stones 15 combination modelling tools 51 gold leaf 76 metal fillers 69 armatures 34 cones 45 gold size 77 metal foils 87 auto-dispenser 71 copper foil 87 graphite powder 73 metal leaf 76 autoglym 71 copper leaf 76 green casting wax 49 metal melting pots 73 copper wire 35 gum ammoniac 77 metal polish 71 B cyanoacrylate adhesives 88 metal treatments 80 H microcrystalline wax 49 banker turntables 31 D mixing beakers 93 batt wash 45 haematite 80 mixing bowl 93 batts 45 Deluxe Materials 89 hake brushes 87 mixing sticks, wooden 71, 93 beakers 93 dental tools 56 hammer handles & wedges 22 mod-roc 48 beech mallets 22 diamond coated abrasives hammers 22 modelling stands 32 beeswax 49 24, 25, 26 hand brushes 90 modelling tools 50 beeswax polish 83 diamond files 24 hand cleanser 93 mops, general purpose 87 bench 31 diamond rifflers 25 hand protection cream 93 mops, soft hair 78 bench screw 16 diamond whetstone 17, 20 handle makers 53 mutton cloth. See stockinette bench stones 15 Digital scale 93 hardwood modelling tools 50 biresin g26 70 disposable gloves 93 health & safety products 92 N bismuth 73 Dremel, drill 27 hogs hair fitches 87 black patinating wax 83 dummy mallets 22 hole cutters 53 needle files 25 blue wax 49 DVDs 9 honing oil 17 needles 53, 54 bolted bust pegs 35 hose clips 35 new series modelling tools 60 E Nichrome Wire 34 books 2, 6 I bouchard hammers. See bush earth pigments/colours 85 nylon mallets 22 hammers electric gelflex melting pots 62 improved gold body 78 P bow harp 53 electric metal melting pots 73 ingot mould 73 bowl, polythene 93 epoxy resin 70 iron paste 80 paint stripper 89 bowls, for plaster 67 eyeshield 92 iron weighting filler 69 pallet knives 54 brass fencing 66 italian rifflers 23, 24, 25 paperclays 46 brass hand brush 90 F parting agents 68 J bronze hand brush 90 feathers & wedges 20 patina waxes 83 bronze powders 79, 81 ferracotta. See terracotta cast with jelly knife 62 pendant drill 27 bronze rifflers 25 iron jubilee clips 35 pewter 72 brush cleaner 89 figure irons 34 pewter sheet 87 brushes 86 plaster 66

94 Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices.

catalogue2018d.p65 94 8/8/2018, 4:54 PM plaster bandage 48 superglue. See cyanoacrylate S waxes 49 plaster bowls 67 adhesives wet & dry paper. See abrasive plaster brushes 67 sable brushes 86 surform 26 waterproof paper plaster knives 67 scalpels 90 swann-morton 90 whirler 32 plaster polymer 66 scopas chops 16 swann-morton blade remover unit white metals 72 plaster rasps 67 scrapers, cabinet 17 (bru) 91 white modelling wax 49 plaster tools 57, 58, 59 scrapers, flexible steel 56 synthetic onyx filler 69 whiting 78 plasterers’ scrim 66 scrim 66 syringe bodies 93 wire, aluminium 34 plasterers’ small tools 56 secar 71 67 wire, copper 35 plastik 70 clear 71 shellac 84 T shellac filler sticks 84 wire modelling tools 52 pneumatic hammer 21 table modelling stands 32 shellac flakes 84 wire, steel galvanised 34 polyester pigments 68 talc 73 silicone carbide slipstones 16 wire wool. See steel wool polyester resins 67 tamping brush 78 silicone rubbers 63 woodcarving tool sets 13 polymorph. See smart plastic terracotta cast with iron 66 sketch stand 32 woodcarving tools 11 polyurethane foam 70 thermometer (wax / gelflex) 62 slate filler 69 wooden modelling stand 32 polyurethane pigments 70 thixo additive 64 sliding armatures 34 woods metal alloy 73 polyurethane resin 70 throne 31 slip trailer 53 potters' wheels 36 tin alloys 72 slips & stones 15 pr88 hand protection cream 93 tool box 61 smart plastic 89 props 45 tool rolls 61 smith & mason square 20 pugmills 37 tourmaline. See antiquing fluid soft hair mops 78 pur400 65 tri-sodium citrate 66 soft soap 66 PVA release agent 68 tung oil 84 solvent glue 89 pyrography 17 tungsten tipped tools 19 solvent Thinner 81 turning tools 54 R spatulas 57 turpentine 84 spirit lamp. See alcohol burner rabbit skin glue 77 spraybooths 38 raw materials 44 U sprue cutter 73 release agent, ambersil pur400 65 square aluminium wire 34 underglaze pencils 45 release agent, formula 5 64 squirrel brushes 86 underglazes 43 release agents, for resin 68 stainless steel hand brush 90 urethane resin 70 renaissance wax 83 stainless steel pottery tools 54 resin, epoxy 70 V stanley knives 91 resin, polyester 67 steel wool 90 verdigris wax 83 respirators 92 stilts 45 vice 16 retouch crayons 84 stockinette 93 videos 9 ribbon tools 52 stonecarving tools 18 vinamold 62 ribs 54 stoneware glazes 41 rifflers 23, 24, 25, 26 W strop & strop dressing 16 rosin 49 student stands 33 wax & polish remover 83 rottenstone 90 substitute gold leaf 76 wax additive 71 round aluminium wire 34 suede tool rolls 61 wax modelling tools 55 rubber kidneys 51 super sculpey 48 wax pigments 49 rubbing blocks 20

*Special Note All products in our Sculptors' Catalogues are shown on our website: www.tiranti.co.uk. Please see website for latest products and prices.

Prices are shown excluding & including VAT and are correct at time of publication, please see website for latest prices. 95

catalogue2018d.p65 95 8/8/2018, 4:54 PM