CALIPERS Medium – Heavy Duty New & Remanufactured Standard, Semi-Loaded, Loaded
BEPCO, Inc 2475 S Stratford Road Winston Salem, NC 27103 336-760-0740 800-735-1154 fax 336-768-3756
QUALITY CALIPERS NEW & REMANUFACTURED
STANDARD
SEMI-LOADED HARDWARE KIT & BOLTS INCLUDED WITH SEMI- LOADED & LOADED CALIPERS
LOADED HOW TO IDENTIFY A DISC BRAKE CALIPER
1. MECHANIC SHOULD NOTE THE SIDE OF THE 55200X TRUCK THE CALIPER WAS REMOVED FROM. Pictured Bleeder Screw Left Hand Caliper NOTE: RIGHT AND LEFT ARE DETERMINED FROM SAME POSITION AS IF SITTING IN THE CAB OF THE TRUCK
2. THE INLET PORTS ARE LOCATED IN OPPOSITE LOCATIONS FOR RIGHT & LEFT.
NOTE: VIEWING THE CALIPER FROM THE POSITION SHOWN HERE, LOCATE THE INLET PORT ON LEFT OR RIGHT. LEFT LOCATION IS A LEFT HAND AND RIGHT LOCATION IS THE RIGHT HAND
EXECPTION: REMEMBER POSITION Inlet Port Left FORWARDED MOUNTED CALIPER, OR REAR MOUNTED CALIPER. THIS COULD CHANGE RIGHT
VIEWING A CALIPER FROM THE BACK
Bleeder Screw on Left = Bleeder Screw on Right = Right Hand Caliper Left Hand Caliper
55250X When mounting this caliper, be sure to fit the bleeder screw (provided with purchase) to the same location as when the unit was removed. DISC BRAKE CALIPER MOUNTING POSITION
BEFORE REMOVING: CHECK & NOTE THE POSITION OF THE CALIPER
Bleeder Screw
Top of Wheel
Forward Mounted Caliper Rear Mounted Caliper
***Bleeder Screw must be positioned at top of wheel, whether the caliper is mounted in either forward or rear position.
DISC BRAKE CALIPER SERVICE HELP
• SUPPORT VEHICLE SECURELY Use a lift or jack stand to support the vehicle. Caliper replacement should never be performed with the vehicle supported by a jack. • NEVER LET CALIPER HANG BY THE BRAKE LINE Suspend it from a frame or suspension member with a piece of strong wire • IT IS RECOMMENDED THAT CALIPERS BE REPLACED IN PAIRS Abnormal operating and premature pad wear factors could result if calipers are not replaced in pairs • INSPECT THE BRAKE PADS Brake Pads must be replaced if they are worn beyond specifications. • INSPECT THE BRAKE LINES Brake Lines which are cracked or show signs of softness should be replaced • USE NEW BRAKE FLUID The use of old Brake Fluid will return contaminants and moisture into the system which can corrode parts and increase possibility of brake system failure. • USE APPROVED GREASE ONLY Use only high temperature, silicone base grease when lubricating sliding type calipers. • DO ONE WHEEL AT A TIME Work on one wheel at a time, using the other wheel as a reference.
Caliper Installation and Trouble Shooting
Before installing a caliper:
1) It is recommended that both calipers on an axle should be replaced at the same time.
2) Pads should be replaced on both calipers on an axle at the same time. Reusing heavily worn pads will allow the caliper piston to be over extended and can result in the piston not returning. Resulting in overheating, and or damage to the piston seals and dust boots.
3) Caliper slide bolts and pins should be inspected for wear and replaced as necessary. Worn slide bolts and pins can cause the caliper to bind and will result in premature pad wear and overheating that can result in damage to the caliper seals. Damage to the caliper housing and axle hardware can also occur.
4) The system should be flushed thoroughly to remove any contaminants and avoid damage to the caliper seals.
5) Grease all contact points per manufacturer’s recommendations to avoid wear to components, and binding of moving parts.
6) Check axle seals for leakage. Grease and or oil from a damaged seal will coat the rotor and pads and can cause slipping and reduced brake function.
Caliper installation should be done according to manufacturer’s recommendations.
After installing calipers:
1) The system should be bled thoroughly. Air trapped in the brake line can cause the caliper to apply and not return, or not apply at all.
2) After bleeding the system the brake pedal should be firm. Road test the unit to confirm proper operation.
Bendix Dayton Euclid Part No. New Application UCX Part No. Description Casting # Inlet Port Pad No. Part # Part # Part # Ford 1985- 2.87 Varga VFCC2283- 2283-7X N/A 1991 10-3194 600-909 E-7178X D379 Twin Piston 7 CF6000-8000 Ford 1985- 2.87 Varga 2284-5X N/A 1991 10-3195 600-910 E-7179X VFCC 2284-5 D379 Twin Piston CF6000-8000 GM Platform, 89040158 GMT 560- 66MM Twin Piston 46000X TRW145513 7/16 - 24 D101D 4500-5500- WF4 6813 R4212069 6500 55098X 55098 Navistar 10-4007 600-209 E-4236X 3.38" Single Piston 2238452R 7/16 - 20 D184 55099X 55099 Navistar 10-4006 600-208 E-4235X 3.38" Single Piston 2238451L 7/16 - 20 D184 Chevrolet 55199X 55199 10-4191 600-231 E-9169X 3.38" Single Piston 2238452 M10 x 1.5 D149 GMC Chevrolet 55200X 55199 10-4190 600-230 E-9170X 3.38" Single Piston 2238451 M10 x 1.5 D149 GMC 4151020, 2.60" Twin Piston 55245X 55245 Navistar 10-3238 600-906 E-9209X 2238229 First 7/16 – 24 D184 (55717X new style) design only.
Chev/GMC 2.88" Twin Piston 55250-1X N/A N/A 4150844 7/16 - 24 D225 Navistar (Steel Pistons)
Chevrolet, 55250X √ 55250 10-1130 600-904 E-4238X 2.88" Twin Piston 4150844 7/16 - 24 D225 GMC, Navistar
2.50" Twin Piston Chevrolet 55251AX 55251A 10-4000 600-905F E-11117 6 Threaded Holes 472 & 563 7/16 - 24 D224 Ford, GMC Standard 2.50" Twin Piston Chevrolet 55251X 55251 10-4026 600-905F E-4244X 4 Threaded Holes 472 7/16 - 24 D224 Ford, GMC Metric
Chevrolet 55252X √ 55252 10-3118 600-908 E-4245X 2.88" Twin Piston 0578, 0456 7/16 - 24 D236 Ford, GMC
2.874" Single Piston 55254X 55254 Ford 10-3135 n/a E-9179X (Has 4 way anchor 610 3/8 – 24 D375 plate) 55255X 55255 Ford 10-3134 n/a E-9180X 2.874" Single Piston 610 3/8 - 24 D375
Bendix Dayton Euclid Part No. New Application UCX Part No. Description Casting # Inlet Port Pad No. Part # Part # Part #
2.60" Twin Piston 55312X 55312X Navistar N/A (Low Inlet) 4151733 7/16 - 24 D184 (Cut Boss)
Freightliner 2.60" Twin Piston 55313X √ 55313 w/air ride 10-3236 n/a E-11118X Low Inlet 4151733 7/16 - 24 D184 Suspension (Full Boss)
International 2.60" Twin Piston 55314X √ 55314 10-3188 600-907 E-4237X 4151733 7/16 - 24 D184 Navistar High Inlet
55411X Ford 10-3159 600-229 E-9167X 2.188" Twin Piston 390 3/8 – 24 D120
55412X Ford 10-3158 600-228 E-9168X 2.188" Twin Piston 390 3/8 – 24 D120
KH91133 55454X Dodge Truck 10-1107 600-201 E-9143X 2.375" Twin Piston 3/8 – 24 D87 97202 KH91133 55455X Dodge Truck 10-1106 600-200 E-9144X 2.375" Twin Piston 3/8 – 24 D87 97202 55460X Ford 10-3147 600-285 E-9205X 2.188" Twin Piston 573,471 3/8 – 24 D450 55461X Ford 10-3146 600-284 E-9206X 2.188" Twin Piston 573,471 3/8 – 24 D450 2.88" Twin Piston Chevrolet 55480X √ 55480 10-1130 600-904 E-4238X Metric Hose Clamp 4150844 7/16 - 24 D225 GMC Holes Dodge Ram 55500X 55500 10-4009 n/a E-9185X 2.938" Single Piston 649 M10 x 1.5 D369 1500 Dodge Ram 55501X 55501 10-4008 n/a E-9186X 2.938" Single Piston 648 M10 x 1.5 D369 1500 Ford E 2.362" (60mm) 55604X 55604 10-3127 600-249 E-9181X KH12068401 3/8 - 24 D411 Ford F450 Twin Piston Ford E 2.362" (60mm) 55605X 55605 10-3126 600-248 E-9182X KH12068401 3/8 - 24 D411 Ford F450 Twin Piston 2.205 Twin Piston 55636X 55636 10-3145 600-283 E-9207X Ford E250, E350, 12514901 D557 1994-92 2.205 Twin Piston 55637X 55637 10-3144 600-282 E-9208X Ford E250, E350, 12514901 D557 1994-92
Bendix Dayton Euclid Part No. New Application UCX Part No. Description Casting # Inlet Port Pad No. Part # Part # Part #
Navistar 55656X √ 55656 w/Air 2.88" Twin Piston 4152279 7/16 - 24 Suspension 55687X 55687 10-4013 600-277 86mm Single Piston 419 M10 x 1.5 D459 55688X 55688 10-4012 600-276 86mm Single Piston 418 M10 x 1.5 D459 Navistar M1400, 1452, 2.60" Twin Piston 1454, Metro 55717X √ 55717 10-3188 n/a E-4237AX New Style 4151733 7/16 – 24 D184 Series Replaces 55245X S1600,S1652, S1600 55748X 55748 Ford E350 10-3149 600-315 2.21" Twin Piston KH12795101 3/8 – 24 D655 55749X 55749 F350 10-3148 600-314 2.21" Twin Piston KH12795101 3/8 – 24 D655 Ford, Lincoln Truck F250 HD, 129297, 2004-1997 51mm 55794X Super Duty 10-3204 Meritor D702 Bore, Location 4WD SRW #R4255794X Right, Front Ford, Lincoln Truck F250 HD, 129297, 2004-1997 51mm 55795X Super Duty 10-3205 Meritor D702 Bore, 4WD SRW #R4255795X Location Left/ Front 55804X 55804 Chevy/GMC 10-4384 4152828 M10 x 1.5 D184 55811X 55811 Isuzu NPR 10-8487 600-9191 54mm Twin Piston 42107 D675 55812X 55812 GM W4 FC 10-8486 600-9192 54mm Twin Piston 42107 D675 45mm Bore, F250 Super Location 55829X Duty ,Ford 10-3220 4507 D757 Right/Rear, Truck 2004-2000 F250 Super 45mm Bore 55830X Duty, Ford 10-3220 Location Left/Rear, 4507 D757 Truck 2004-2000 55837X 55837 Ford F250 10-3219 54mm Twin Piston 5403 D824 55838X 55838 Super Duty 10-3218 54mm Twin Piston 5403 D824 1998 & Newer 4153268, 3000-49000 66MM Pin Mount 55849X √ 55849 10-1170 600-911 E-11750-SL 2501839C91, 7/16 - 24 D786 Series Navistar Twin Piston 2508253C91 Vehicles
4153222 1998 & Newer 2501838C91 3000-49000 73mm, Pin Mount 2508254C91 55850X √ 55850 10-1168 600-912 E-11756-SL 7/16 -24 D786 Series Navistar Twin Piston 3518747C93 Vehicles 47000204052 413 55857X N/A Ford E350 10-3233 Twin Piston 132705 D802 55858X N/A Super Duty 10-3232 Twin Piston 132705 D802 Bendix Dayton Euclid Part No. New Application UCX Part No. Description Casting # Inlet Port Pad No. Part # Part # Part # Ford Super 55861X 10-3222 600-9152 60mm Twin Piston 130307 3/8 – 24 D777 Duty 55862X F450-F550 10-3223 600-9151 60mm Twin Piston 130307 3/8 – 24 D777 Chevrolet/ GMC 2003- 54mm Bore, AD45V2112B74, 56516X 6/99 Location Right/Front AD54T2918A922 D825 W4FC, WSFC, Meritor #4212271X X 50,500,5000 Chevrolet/ AD45V2112B GMC 2003- 54mm Bore, 73, 56517X 6/99 Location Left/Front D825 AD54T5111A W4FC, WSFC, Meritor #4212272X 923X 50,500,5000 Chevrolet 57mm Bore GMC Truck, Location Right/Front 56518X 5/1999-1998 AD57T5702146 D826 Meritor W4FC, W5FC, #R4212277X 50,500,5000 Chevrolet 57mm Bore GMC Truck, Location Left/Front 56519X 5/1999-1998 AD57T5702146 D826 Meritor W4FC, W5FC, #R4212278X 50,500,5000 GMC 1998- 56520X 56520 N/A 66MM Twin Piston 135607 7/16 - 24 N/A 2000
56544X Location Right/Front
56545X Location Left/Front
Bendix Dayton Euclid Part No. New Application UCX Part No. Description Casting # Inlet Port Pad No. Part # Part # Part #
Ford 650, 750 1999-2002 GMC Medium Duty 15004608 √ N/A N/A 70MM Dayton 595B,597B 7/16 - 24 D769 Kodiak/Topkick 1998-2002 Thomas Bus, Front & Rear
Ford 650, 750 1999-2002 GME Medium Duty 15004609 √ N/A N/A 70MM Dayton 595B,597B 7/16 - 24 D769 Kodiak/Topkick 1998-2002 Thomas Bus, Front & Rear
Ford 650, 750 1999-2002 GMC Medium Duty 15004608PX N/A N/A E-11735-SL 64MM Dayton 602A, 603A 7/16 - 24 Kodiak/Topkick 1998-2002 Thomas Bus, Front & Rear
Ford 650, 750 1999-2002 GME Medium Duty 15004608X N/A 10-3176 E-11733-SL 70MM Dayton 595B,597B 7/16 - 24 D769 Kodiak/Topkick 1998-2002 Thomas Bus, Front & Rear
Ford 650, 750 1999-2002 GMC Medium Duty 15004609PX N/A N/A E-11736-SL 64MM Dayton 602A, 603A 7/16 - 24 Kodiak/Topkick 1998-2002 Thomas Bus, Front & Rear
Bendix Dayton Euclid Part No. New Application UCX Part No. Description Casting # Inlet Port Pad No. Part # Part # Part #
Ford 650, 750 1999-2002 GMC Medium Duty 15004609X N/A 10-3177 E-11734-SL 70MM Dayton 595B,597B 7/16 - 24 D769 Kodiak/Topkick 1998-2002 Thomas Bus, Front & Rear
Ford/Mack with Hydraulic Front KH91142-01 D170 Outer HD1002X N/A Brakes and 10-1128 3.62 Twin Piston 5HA-2B- 7/16 - 24 D171 Inner Rear Air 120BB Brakes
American LaFrance Rockwell Air Disc M1157LHX Ladder Fire Brake Caliper Truck American LaFrance Rockwell Air Disc M1157RHX Ladder Fire Brake Caliper Truck 2.76" Four Piston M10 x 1.5 60050312MX N/A 10-3187 E-11466-SL 581F D769 70 MM Metric GMC, Navistar, 2.76" Four Piston 60050312X N/A 10-3161 60-050312 E-11123-SL 581F 7/16 - 24 D769 Ford 650 & 70MM 750 2.76" Four Piston M10 x 1.5 60050313MX N/A 10-3186 E-11467-SL 581F D769 70MM Metric GMC, Navistar, 2.76" Four Piston 60050313X N/A 10-3160 60-050313 E-11124-SL 581F 7/16 - 24 D769 Ford 650 & 70MM 750
√=New
Available
Right Hand Part # 55098X, 55098SX, Right Hand 55098LX Left Hand Part # 55099X, 55099SX, 55099LX 3.38” Bendix Description Single Piston Caliper Application Navistar Left Hand Casting #2238452 (R) Casting #2238451 (L) Characteristics Pad #D184 SAE Threads or Std Threads
Right Hand 55199X, 55199SX, Part # 55199LX Right Hand Left Hand 55200X, 55200SX, Part # 55200LX
3.38” Bendix Description Single Piston Caliper Left Hand Application GMC/CHEVERLOT
Casting #2238452 (R) Casting #2238451 (L) Characteristics Pad #D149 Metric Thread Inlet Port/ Metric Bleeder Screw
Part Numbers 55245X, 55245SX Front View 2.60” Bendix Twin Description Back View Piston Caliper
Application NAVISTAR May have External Joining Tube (Reman Unit will not) Characteristics Casting #4151020, 2238229 Steel Pistons
Part Numbers 55250-1X, 55250-1LX
2.88” Bendix Twin Description Piston Caliper
Navistar Application GMC/Chevrolet 1st Design, Pre 1988 Steel Pistons Characteristics Pad #D225 1st & 2nd Designs 2.88” Use same casting #4150844
055250 Part Numbers 055250X 2.88” Bendix Description Twin Piston Caliper Navistar Application GMC/Chevrolet Casting #4150844 Pad #D225 Characteristics 2nd Current Design Phenolic Pistons
Part Numbers 55250SX, 55250LX 2.88” Bendix Description Twin Piston Caliper Navistar Application GMC/Chevrolet Casting #4150844 Pad #D225 Characteristics 2nd Current Design Phenolic/Steel Pistons
55250LX Loaded
55251AX, 55251ASX, Part Numbers 55251ALX
Description 2.50” Twin Piston
Later Model Ford with leaf Application spring clearance Casting #472 & 563 Characteristics Pad #D224 Right & Left Hand (4 Threaded Bracket Holes)
55251AX 55251X (6 Threaded Holes) (4 Threaded Holes) (No holes on outside)
055251, 55251X Part Numbers 55251SX, 55251LX
Description 2.50” Twin Piston FORD Application GMC/Chevrolet Casting #472 Pad #D224 Characteristics Right & Left Hand (2 Threaded Bracket Holes)
055252, 55252X, Part Numbers 55252SX, 55252LX
2.88” Description Dayton Walther Twin Piston Caliper
Ford Application GMC/Chevrolet Casting #0578, 0456 Right & Left Hand Characteristics Grooved Rail Design PAD #D236SD
Part Number Cut Boss 55312X
Part # 55312-1X w/Steel Piston 2.60” Twin Piston Description Right & Left
Inlet Difference Application IHC/Navistar Low Inlet 55312X Casting #4151733 Phenolic or Steel Pistons Characteristics Pad #D184 Low Inlet
Inlet Difference Low Inlet 55313X
055313, 55313X, Part Numbers 55313SX, 55313LX, 55313-1X(Steel Piston) Description 2.60” Twin Piston Freightliner Application (with air ride suspension) Casting #4151733 Low Inlet Characteristics Phenolic or Steel Piston, Brake inlet holes at bottom of casting Full Boss
055314, 55314X, Part Numbers 55314SX, 55314LX 2.60” Bendix Twin Piston Description Second Design (1989-Current) IHC/Navistar Application 1600-1900 Series (1979-1992) Casting #4151733 Pad #D184 Characteristics Right & Left Press in Piston Boot, High Inlet
High Inlet
Right Hand Part # 55411X, 55411SX Left Hand Part # 55412X, 55412SX Front View 2.188” Bendix Description Twin Piston Application FORD
Casting #890 Characteristics Pad #D120
55411X 55412X Back View Back View Right Hand Left Hand
Part Numbers 55454X, 55454SX Kelsey Hayes 2.375” Description Twin Piston Caliper Right Hand Dodge Truck 1981-73 CB, MB300, 350, 400, 450, Motor Home, Cab/Chassis Application 1-1 ½ ton M, R, 350, 400, 500, 600-Motor Home, Cab/Chassis ½ ton Casting #KH91133 Characteristics Pad #D87 3/8-24 Ports
Part Numbers 55455X, 55455SX
Kelsey Hayes 2.375” Description Twin Piston Caliper Left Hand Dodge Truck 1981-73 CB, MB300, 350, 400, 450, Motor Home, Cab/Chassis Application 1-1 ½ ton M, R, 350, 400, 500, 600-Motor Home, Cab/Chassis ½ ton Casting #KH91133 Characteristics Pad #D87 3/8-24 Ports
Left Hand Part # 55460X, 55460SX Right Hand Part # 55461X, 55461SX
Bendix 2.188” Description Twin Piston Caliper Application E6TA-2K140 & Ford Casting #573, 471, Characteristics E6TA-2K140 55460X Pad #D450 Back View Right Hand
55460X Back View Right Hand
055480, 55480X Part Numbers 55480SX, 55480LX Bendix 2.88” Description Twin Piston Caliper
Application GMC/Chevrolet Casting #4150844 Pad #D3225 Characteristics Left & Right Metric Holes for Brake Line Clamps Note: Use Caliper #55250X for brake line clamp with non-metric holes
Right Hand Part # 55500X Left Hand Part # 55501X
2.938” (2 15/16”) Description Single Piston Caliper
Application Ford F350 Trucks Casting #648- Left 55501X Casting #649-Right Left Hand Characteristics Pad #D369 Brake Hose Inlet M10 x 1.5
55500X Right Hand
Right Hand 055604, 55604X Part Numbers 55604SX, 55604LX
Left Hand 055605, 55605X Part Numbers 55605SX, 55605LX
2.36” Kelsey Hayes Description Twin Piston Ford E & Application F450 Super Duty Casting #KH2068401 Pad #D411 Characteristics Brake Inlet Holes 3/8”-24
Right Hand Part # 55636X Left Hand Part # 55637X 2.205 Description Twin Piston Caliper Application Ford Casting #12514901 Characteristics Pad #D557 55637X Left Hand 55636X Right Hand
055656, 55656X, Part Numbers 55656SX, 55656LX
2.88” Bendix Description Twin Piston Caliper Navistar Models with Application Air Suspension Casting #4152279 Characteristics Pad # Right & Left Low Inlet
**Brake Inlet Holes at bottom of casting
Right Hand Part # 55687X Left Hand Part # 55688X 55687X Right Hand 86MM Description Single Piston GMC Truck C50, C3500 Application K Series 4X4 w/dual wheels (1988-2000) Casting #419 Right Characteristics Casting #418 Left Pad #D459 55688X Left Hand
055717, 55717X Part Numbers 55717SX, 55717LX
2.60” Bendix Description Twin Piston Caliper Freightliner w/Air Ride Suspension Application Navistar M1400, 1452 & 1454 Metro Series: S1600, S1652 & 1654 Conventional Casting #4151733 Note: Characteristics Pad #D184 55314X & 55717X are Same except Right & Left 55314X Has Two Threaded Bracket Holes 55717X Has Four Threaded Bracket Holes
Right Hand Part # 55748X Left Hand Part # 55749X
Description 2.21” Twin Piston
Application Casting #KH12795101 (R) Characteristics Casting #KH12795101 (L) Pad #D655
55748X Right Hand 55749X Left Hand
Part Numbers 55804X
2.60 Bendix Description Twin Piston Caliper Top Inlet GMC/Chevrolet 2000-1996 P/35/3500, P40/P45 Van, Application Motor Home Chassis, Forward Control Casting #4152828 (R & L) Characteristics Pad #D184
Right Hand Part # 55811X
Left Hand Part # 55812X 54MM Description 55811X Twin Piston Right Hand Isuzu (1987-98) GMC Med Duty Application Truck W45042 & W4 Series 55812X All 1992-97 Left Hand Casting #42107 Characteristics Pad #D675
Right Hand Part # 55837X
Left Hand Part # 55838X
2.125” or 54MM Description Twin Piston Ford Truck Application F250, F350 1998-2000 Casting #5403 Characteristics Pad #
55838X 55837X Left Hand Right Hand
Part 055849, 55849X Numbers 55849SX, 55849LX
66MM Pin Mount Description Bosch Twin Piston IHC/Navistar Application 1998-2000 School Bus 4000 Series Casting #4153269 Characteristics Right & Left Pad #D786
NOTE: 55849X & 55850X are Similar except 55850X is larger
055850, 55850X Part Numbers 55850SX, 55850LX
73MM Pin Mount Description Bosch Twin Piston IHC/Navistar Application 1998-2000 School Bus 4000 Series Casting #4153222 Characteristics Right & Left Pad #D786
Right Hand Part # 55857X Left Hand Part # 55858X
Description Twin Piston E200/250, E300, 350 ¾ & ½ ton Econline Van Application RV, Club Wagon, Camper & School Bus (1999-2002) Casting #132705 Characteristics Right & Left Pad #D802
55858X 55857X Left-Hand Right Hand
Right Hand Part # 55861X Left Hand Part # 55862X
2.38” Kelsey Hayes Description Twin Piston Ford Truck F53, F59, F450, F550 Application 55862X Super Duty Pickup 55861X Left Hand 1198-2000 Right Hand Casting #130307 Characteristics Right & Left Pad #D777
Part Numbers 56520X 66MM Bendix Description Twin Piston GMC, Application Kodiak C5, C6 & C7 Series 1998-2000 Casting #135607 Characteristics Right & Left Pad #1010 Left Hand (Image 1) Meritor Quadraulic Disc Brake Right Hand (Image 2) Identification Chart
Left Hand (Image 1) Is the caliper Right Hand (Image 2) right or left hand?
7/16-24 Is the port M10x1.5 M10x1.5 7/16-24 7/16-24 or Is the port M10x1.5 7/16-24 or M10x1.5
Are the Are the pistons pistons phenolic or phenolic or steel? Steel steel Phenolic Phenolic Steel
New Number New Number 60050312X 60050321X 60050320X 60050312LX 60050313X 60050321LX 60050320LX 60050313LX
Old Number Old Number 60050313MX 60050312MX
Without Pads Without Pads 60450483X 70MM with tube seats 60450482X 70MM with tube seats 15004609X 70MM without tube seats 15004608X 70MM without tube seats 15004609PX 64MM without tube seats 15004608PX 64MM without tube seats 60450481X 64MM with tube seats 60450480X 64MM with tube seats 60450479X 70MM school bus application 60450478X 70MM school bus application 60450477X 64MM school bus application 60450476X 64MM school bus application With Pads With Pads 60450481LX 60450480LX 60450483LX 60450482LX 15004609LX 15004608LX 15004609PLX 15004608PLX
Right Hand Part # 60050312X Left Hand Part # 60050313X
2.76” Dayton Four Piston Caliper Description (70MM)7/16”-24 Brake Hose Inlet GMC, Navistar Application Ford 650 & 750
Casting #581F Right & left Characteristics Pad #D769 2.76” Bore w/Steel Pistons Standard
Note: These calipers are similar to part #15004608X & 15004609X, but inlet locations are different and above pistons are steel, 15004608X &09X are phenolic.
Right Hand Part # 60050320X, 60050320LX 60050320X Metric Left Hand Part # 60050321X, 60050321LX Right Hand Side Inlet
2.76”, Steel Piston Dayton Description M10 x 1.5 Inlet Port w/tube seats
GMC, Navistar Application Ford 650 & 750 Casting #581F Right & left Pad #D769 60050321X Characteristics 2.76” Bore w/Steel Pistons Left Hand Metric M10 x 1.5 Side Inlet Metric
Right Hand Part # 60050473X, 60050473LX Left Hand Part # 60050474X, 60050474LX
64MM, Phenolic Piston Description 7/16”-24 Inlet port w/tube seats
Application
Characteristics Casting #602A, 603B
60050482X, 60050482LX Part Numbers 60050483X, 60050483LX
Description
Application
Characteristics
Right Hand Part # 15004608X, 15004608LX Left Hand Part # 15004609X, 15004609LX
70MM Dayton Description Four Piston Caliper
Ford 650, 750 Series 1999-2002 GMC Medium Duty Application Kodiak/Topkick 1998-2002 Thomas Bus Front & Rear
Casting #595B & 597B Right & Left Hand Pad #D769 Characteristics Casting on Front & Back Phenolic Pistons
15004608PX, Right Hand Part # 15004608PLX Left Hand Part # 15004609PX, 15004609PLX
64MM Dayton Description Four Piston Caliper Ford 650, 750 Series 1999-2002 GMC Medium Duty Application Kodiak/Topkick 1998-2002 Thomas Bus Front & Rear Casting #602A & 603A Right & Left Hand Pad #D769 Characteristics Casting on Front & Back Phenolic Pistons
Part HD1002, HD1002LX Numbers
3.62 Kelsey Hayes Description Twin Piston Ford, Mack Application w/ Hydraulic Front & Rear Air Brakes Casting #KH91142-01 Ford #5HA-2B-120BB Pad #D170 outer Characteristics Pad #D171 Inner Left & Right Hand Metal Pistons
Right Hand Part # M1157RHX Left Hand Part # M1157LHX
Rockwell\ Description Air Disc Brake Caliper American LaFrance Application Ladder Fire Truck R/H is spindle turns in counter clockwise direction Characteristics L/H is spindle turns in clockwise direction
Part 46000X Number
TRW Description WF4 6813 66MM Twin Piston
GM Platform Application GMT 560, 4500, 5500, 6500
Casting #TRW 145513 FMSI Pad #D1010 Characteristics GM #89040158 Meritor #R4212069
Right Hand Part # 2284-5X, 2284-5LX Left Hand Part # 2283-7X, 2283-7LX
2.87” Varga Description Twin Piston
Application Ford Cargo Casting #VFCC2284-5 Right Characteristics Casting #VFCC0005-1 Left Pad #D379
Part Numbers
Description
Application
Characteristics
Severe FMSI Brake Caliper Pad Duty Plate Illustration System Pieces Application Fits Part Number
Number (D)
55199 (LH) D717 2 Inner Hydraulic D184SD GM/Navistar 55200X (RH) (D184) 2 Outer
55251X Hydraulic D224SD D224 4 Same F650/750 (RH & LH)
55250X 2 Inner Hydraulic D225SD D225 GM/Navistar (RH & LH) 2 Outer
55252X Hydraulic D236SD D236 4 Same Ford Bus (RH & LH)
55605X 2 Inner Hydraulic D411SD D411 F450 (RH & LH) 2 Outer
15004608 (RH) Chevrolet, GMC, 15004609(LH) Hydraulic D769SD D769 4 Same Ford 60050312(RH) Isuzu, Thomas Bus 60050313(LH)
Ford, International w/73MM Quadraulic 55850X Hydraulic D786SD D786 4 Same Caliper, PAD (RH & LH) THICKNESS is 26.8 MM
Ford, International w/73MM Quadraulic 55849X Hydraulic D786ASD D786 4 Same Caliper, PAD (RH & LH) THICKNESS is 20.3 MM Severe FMSI Brake Caliper Pad Duty Plate Illustration System Pieces Application Fits Part Number
Number (D)
56520X GMC Hydraulic D1010SD D1010 4Same (RH & LH) Chevrolet Truck
55861X D777SD D786 Ford F550 55862X
D106650 Ford F550
SHIM KITS
Gap Pad # Piston Dia Shim Kit # Caliper # Shim Thickness Measurement SK225 55250X .025” .058-.101 D225 Bendix 2.60” & 2.88” SK225 55480X .025” .058-.101 D225 Bendix 2.60” & 2.88” SK225 55656X .025” .058-.101 D225 Bendix 2.60” & 2.88” SK225 55250X .045” .101-.145 D225 Bendix 2.60” & 2.88” SK225 55480X .045” .101-.145 D225 Bendix 2.60” & 2.88” SK225 55656X .045” .101-.145 D225 Bendix 2.60” & 2.88” D224 Bendix 3.38” Single SK224 55251X .025” .036-.055 Dayton 2.50” Twin D224 Bendix 3.38” Single SK224 55251X .040” .056-.075 Dayton 2.50” Twin D224 Bendix 3.38” Single SK224 55251X .060” .076-.095 Dayton 2.50” Twin D224 Bendix 3.38” Single SK224 55251X .074” .096-.115 Dayton 2.50” Twin SK236 55252X .036” - .059” .036-.059 D236 Dayton 2.88” SK236 55252X .060” - .074” .060-.074 D236 Dayton 2.88” SK236 55252X .075” - .089” .075-.089 D236 Dayton 2.88” N/A 55252X .096 - 0.115 .096 - 0.115 D236 Dayton 2.88” N/A 55252X .115 - 0.130 .115 - 0.130 D236 Dayton 2.88” R40H8203 55250X N/A N/A R40H8203 55250X N/A N/A R40H8203 55250X .025” .058-.101 R40H8203 55250X .045” .101-.145 Kit # Caliper # Pad # (Services One Wheel)
55199X 12-5529 E-4209 D149SD 55200X 12-5529 E-4209 D149SD
55098X 12-5519 E-4105 D184SD 55099X 12-5519 E-4105 D184SD 55245X 12-5519 E-4105 D184SD 55314X 12-5519 E-4105 D184SD 55717X 12-5519 E-4105 D184SD 55804X 12-5519 E-4105 D484SD
55250X 12-5522 E-4107 D225SD 55656X 12-5522 E-4107 D225SD
55849X 12-11754 E-11754 D786ASD 55850X 12-11754 E-11754 D786SD
Kit # Caliper # Pad # (Services One Axle)
12-5735 55604X E-6887 D411SD 12-5735 55605X E-6887 D411SD (Services One Axle)
55251X 12-50153 E-4111 D224SD
60450483X 12-11729 E-11121 D769SD 60450482X 12-11729 E-11121 D769SD 60450481X 12-11729 E-11121 D769SD 60450480X 12-11729 E-11121 D769SD
ROTORS
Bolt Brake Rotor Overall Disc Overall Pilot Circle Bolt Holes Rotor Part # Type Wt Type Diameter Thickness Depth Diameter Diameter No. Size Special Info A B C D E F 30-54102P Hydraulic 36 HAT 14.75 1.345 3.81 5.4 6.75 5 0.66 30-54103P Hydraulic 36 HAT 14.75 1.345 3.81 5.4 7.25 6 0.78 30-54104P Hydraulic 37 HAT 14.75 1.345 3.81 5.4 6.75 6 0.66 30-54105P Hydraulic 36 HAT 14.75 1.345 3.81 5.4 7.25 6 0.78 Drilled for ABS 30-54106P Hydraulic 36 HAT 14.75 1.345 3.81 6 7.25 10 0.59 30-54107P Hydraulic 35 HAT 14.75 1.345 3.81 6 7.25 10 0.78 30-54109P Hydraulic 36 HAT 14.75 1.345 3.81 6 6.75 6 0.66 Drilled for ABS 30-54220P ADB 80 HAT 17.08 1.77 5.16 5.32 6.61 12 0.75 30-54251P Hydraulic 53 U 15 1.435 6.8 7 8.75 6 0.81 30-54255P Hydraulic 47 U 15 1.44 4.49 9.18 11.25 5 0.65 30-54256P Hydraulic 47 U 15 1.44 4.49 9.18 11.25 5 0.78 30-54280P Hydraulic 56 U 15 1.435 6 14.25 12.75 6 0.78 30-54281P Hydraulic 56 U 15 1.435 6.79 9.37 11.25 10 0.81 30-54282P Hydraulic 56 U 15 1.435 6.09 14.25 12.75 5 0.66 30-54291P Hydraulic 50 U 15 1.435 4.88 9.25 11.25 6 0.78 30-54292P Hydraulic 54 U 15 1.435 6 9.5 11.25 10 0.81 30-54301P Hydraulic 42 HAT 15.39 1.535 3.4 6 7.25 10 0.59 30-54351P Hydraulic 51 U 15.39 1.535 4.75 9.25 11.25 6 0.78 30-54352P Hydraulic 55 U 15.39 1.535 6.03 6.44 8.75 6 0.84 30-54360P Hydraulic 60 U 15.39 1.535 6.07 8.69 11.25 10 0.84 30-54365P-65 Hydraulic 61 U 15.39 1.54 7.6 9.12 11.25 10 0.94 ABS 30-54769P-65 Hydraulic 39 HAT 15 1.435 3.5 5.4 6.75 5 0.78 ABS 30-54770P-65 Hydraulic 40 HAT 15 1.435 3.5 5.4 6.75 6 0.77 ABS 30-54771P-65 Hydraulic 42 HAT 15 1.435 4.44 6 7.25 10 0.58 ABS 30-54773P-65 Hydraulic 38 HAT 15 1.435 3.21 6 7.25 10 0.58 ABS 30-54775P-65 Hydraulic 43 HAT 15.38 1.535 3.4 6 7.25 10 0.58 ABS 30-55060F ADB 80 U 17.07 1.77 5.56 8.5 10.5 10 0.58
ROTORS SUPPLIED BY ROTOR CROSSOVER Manufacturer No. Bepco Rotor No.
BENDIX 141269 30‐54103P 141270 30‐54351P 141271 30‐54102P 141272 30‐54301P 141274 30‐54255P 141275 30‐54360P 141276 30‐54352P 141475 30‐54770P‐65 141476 30‐54769P‐65 141493 30‐54256P 141494 30‐54771P‐65 141585 30‐54104P 141874 30‐54106P 145086 30‐54773P‐65 145348 30‐54773P‐65
FORD E3HZ‐1102A 30‐54351P E4HZ‐1125A 30‐54103P E4HZ‐1125C 30‐54360P E4HZ‐1125D 30‐54352P
GMC 15514357 30‐54301P 15514406 30‐54301P 15515786 30‐54102P 15515789 30‐54104P 15619954 30‐54102P 15619970 30‐54301P 15661543 30‐54106P
GUNITE D3312 30‐54281P D6052 30‐54301P D6054 30‐54102P D6054A 30‐54104P D6054C 54105P/54103P D6115 54282P D6115A 54280P D6121 54280P/54282P D6121A 54280P D‐6128A 54255P D6133 54771P‐65 D6145 54281P D6151 54771P‐65 D6153 54773P‐65 D6175 54771P‐65 D6176M 54773P‐65 D6183 54771P‐65 D6194A 54770P‐65 D6194M 54770P‐65
INTERNATIONAL/NAVISTAR 1646750C1 54771P‐65 1646770C1 54770P‐65 1646770C2 54770P‐65 1648517C1 54256P 2007173C1 54773P‐65 2007173C2 54773P‐65 2505097C1 54770P‐65 3531661C2 54769P‐65 3531662C2 54773P‐65 3531663C2 54771P‐65 573922C1 54769P‐65 573922C2 54769P‐65
MERITOR 122687 54102P 122688 54104P 122691 54351P 122700 54103P 122701 54255P 122703 54360P 122729 54301P 122743 54352P 122894 54771P‐65 122897 54771P‐65 122920 54256P 122945 54281P 123296 54106P 123439 54107P 123440 54301P 123443 54105P 123468 54109P 123480 54105P 123489 54775P‐65 123550 54773P‐65 123552 54771P‐65 123557 54775P‐65 123572 54770P‐65 123573 54769P‐65 123574 54365P‐65 123642 55060F 68326014 54220P RC4414550 54773P‐65/54775P‐65
PERFORMANCE FRICTION 381.082.20 54773F‐65 381.089.20 54769P‐65 381.113.20 54771P‐65
RAYBESTOS 8510 54301P 8512 54102P 8514 54103P 8516 54351P 8517 54352P 8518 54255P 8521 54769P‐65 8523 54770P‐65 8526 54256P 8530 54771P‐65 8532 54773P‐65 8533 54106P 8537 54773P‐65
WAGNER BD125085 54103P BD125086 54352P BD125088 54102P BD125090 54301P BD125097 54771P‐65 BD125214 54351P BD125244 54256P BD125339 54106P BD125361 54769P‐65 BD125362 54770P‐65 BD125484 54773P‐65
BEPCO, INC 2475 S Stratford Road Winston Salem, NC 27103 336-760-0740 800-735-1154 fax 336-7683756