DOCSLIB.ORG

Fourth ITC Report (PDF)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fourth ITC Report (PDF) =- ~ Friday June 1, 1979 =..-:;;;.. --- --- - =- E § ~- ------- FE':::::--- - ===- -- -- --- -- - :--- .=...- --- --- =- --- - -- -_.- - ------ .-- ---- .--- -- Part V Environmental Protection Agency Interagency .Testing Committeei Receipt of Fourth Report and Request for Comments - - ----- ---- - -- --.-=== ::=., ~ HeinOnline -- 44 Fed. Req. 31865 1979 _ _u ..-_. 31866 Federal R~gister I Vol. 44, No. 107 I Friday, June 1.,1979 I Notices 'ENVIRONMENTALPROTECTION FR 50134).The lTC's revisions ~othe Room 447, EPA, 401 M Street SW., AGENCY initial list appeared 10the Commlttee's Washington, D.C. 20460. All written Second Report and were pubhshed 10 comments will be available for public [OT5-410001; FRL 1237-1) the Federal Register on Apnl19, 1978 (43 inspecbon in Room 447, East Tower, at FR 16684).Those reViSions were the the same address, between 8:30 n.m. nnd Fourth Report of the Interagency addition of four substaitces and four' 4.30 p.m., weekdays. Testing Committee; Receipt of the categories of ~ubstances to the Pnonty Dated: May 18. 1979. Report and Request for Comments List. EPA's response to the second ITC Report was signed by the Deputy . Steven D. JelUnek, . AGENCY:Environmental Protection . Assistant Administrator for To;'Cic Agency (EPA). Administrator ofEPA on May 8,1979 Substances. (see 44 FR 28095, May 14, 1979). In its ACTlor~:This Notice requests comments Third Report, published irt the Federal Toxic Subslanccs Control Act,lnterogoncy Testing Commitlee. on recent additions to the Interagency Register on October 3D,1978 (43 FR Testing Committee's (1Te) priority list of 50631), the Committee recommended the Honorable Douglas M. Costle. chemical substances recommended for addition of one chemical substance and Administrator, Environmental Protection testing under section 4(a) of the Toxic Agency (A-lOa). Room 1200 J1f,401.M two categories of chemical substances Street. SJv., Washington. D.C. 20460. Substances Control Act (TSCA). In to the Priority List. Subsequently, on addition, a change in ITC procedure for Dear Mr. CosUe: On beholt of tho TSCA March 29, 1979, the Agency published a Interagency Tesllng Committee, I om transmitting dossiers of support Notice of a correction made by the ITC information is'described. transmitting to you the Commltteo's Fourth "in the material under the heading Report. This Report revises tho Secllon 4(0) SUMMARY:The ITC, established under "Carcinogenicity" and a definition of the Priority list with the addition and deslgnotlon of eleven individual chemicals ond ono section 4(e) of TSCA, has transmitted its term "derivatives" as it appears for the Fourth Report to the Administrator of category "Glycidol and Its Derivatives" category. EPA. This report revises and uPQates the (43 FR 18733). You will note that the format of Ihls Ruport In this Fourth Report, the Committee differs from earlier reporls In thot the Committee's Priority List of chemicals. Commillee's recommendations and roasons The Report identifies those additional is recommending the addition of 11 for recommendations ora contained In individual chemicals and one category chemical substances the Committee is rationales on the deslgnaled substances. recommending to EPA for priority to its Priority List. Each of these new Do!!slers of supporllng information \oJJ1Inot ba consideration for promulgation of test recommendations has been designated transmilled separately, as tho rallonales rules under section 4(a) of the Act. .by the Committee for priority contain the key Information from the The Fourth Report is being published consideration by EPA. The format of this scientific literature and other oourceo used by with this Notice. The Agency invites "Report differs.from that of the earlier the Committee in making Its decisions on tho interested persons to submit comments .' reports. In the past, the Committee designations. The Committee hopes that this presented summary rationales for its new fonnat provides 0 more tlmoly on the Report. presentation of relevant information than our SUPPLEMENTARY INFORMATION: recommendations in the Report to the Administrator and provided separate previous practice of sondlnc dossiors 10you dossiers of support infor,mation that .several months after the report. Background During the past six months, tho Office of were transmitted to EPA following the Toxic Substances has increased the loyol of Section 4(a) of TSCA authorizes the Agency's receipt of a Report. The Administrator of~A to promulgate staff support to the Commllleo. This hos heading "Reasons for . aided us in our work and is creatly regulations requiring testing of chemical Recommendations" now appears in the apprecloted. substances in order to develop data Report for each designated substance. relevant to determining the risks that Sincerelyyours, This rationale section presents the Carter Schuth.. such chemical substances may present Committee's review of information from to health and the environment. Chairperson.ToSCAInFerasencyTestIng the scientific literature and oilier Committee. Section 4(e),ofTSCA established an sources used to arrive at the ITC Interagency Testing Committee to make designtitions. No separate dossiers will . Fourth Report of the TSCA Interagoncy recommendations of chemical Testing Committee to the Administrator, substances to the Administrator ofEPA be forwarded to EP~ by. the Committee. ,Environmental ProtecUoD Agency to be given priority consideration for AvaUabillty. April)979. proposing test rules under section4(a). The lTC's Fourth Report appears The Committee may at any,one time following this Notice. Summary designate up to 50 of its recommendations for special priority Request for Comments A major section (Sec. 4) of the Toxic consideration by EPA. Within 12 months Substances Control Act of 1976 (TSCA, EPJ}.invites interested persons to Pub. L. 94-469) providos for the testing of that designation, EPA must initiate submit comments on the Committee's rulemaking to require testing or publish of chemicals in commerce which may new recommendations. The Agency pose an unreasonable risk to human in the Foderal Register its reasons for requests that comments be submitted no health or the environment. This section not doing so. later than July 31, 1979. All comments The Committee's initial of the Act also provides for received by that date will be considered establishment of a Comtnitlee, recommendations to the Priority List, of by the Agency in determining whether four substances and six categories of composed of representatives from eIght to propose test rules in response to the designated Federal agencies, to subst.ances, were published in the . Committee's new reco~ndations. recommend chemical substances or Federal Register on October 12, 1977 (42 FR 55026). EPA's response to the initial Comments should bear the identifying mixtures to which the Administrator of. notation OTS-410001 and should be the U.S. Environmental Protection recommendations appeared in the submitted to the Document Control Agency (EPA).should give priority Federal Register on October 26, 1978 (43. Officer, Chemical Information Division, . consideration for the promulgation of Office of Toxic Substances (TS-793), testing rules. The CommiU~e makes HeinOnline-- 44 Fed. Req. 31866 1979 Federal Register I Vol. 44, No. 107 I Friday, June 1, 1919 I Notices 31867 such revisions in the Section 4(e) Warren T. Piver, Alternate Fourth Report of the TSCA Inleragency National Institute for OccupationalS:1fcty Testing Committee to the Administrator, Priority List as it determines to be and Health necessary and transmits them to the Jean G,French Environmental Protection Agency, Aprll Administrator, at least every six Vera W. Hudson,Alternate 1979 months. National ScienceFoundation Chapter 1. Introduction As a result of its deliberations during Carter Schuth,ChcWper&on the past six months, the Committee is Occupatiow Safety and Health 1.1 Background revising the TSCA.Section 4(e) Priority Administration The Interagency Testing Committee List by the addition of eleven individual Fred W. Clayton,Vlcc-Cho.lrperson (Committee) was established under substances and one category all JosephIe.Wagoner,Alternate . Section4(e) or the Toxic Substances designated for action by EPAwithin " LiiUsonAgencies Control Act of1916 (ISCA. Pl.. 94-469). twelve months. The Committee ConsumerProduct Safety Commission The. specific mandate of the Committee considers each newly designated Joseph McLaughUn is to identify and recommend to the addition to be equal priority with those Department ofDefense Administrator of the u.s. Environmental previously designated. The additions to SeymourL.Friess Protection Agency (EPA) chemical the Priority List are presented Department of the Interior substances or mixtures in commerce alphabetically, together \vith the types . Charles R.Walker which should he tested to determine of studies recommended, as follows: Food and DrugAdministraUOD Allen H. Helm their potential hazard to human health SWs1ances and Winston deMonsabcrt.Alternate anrI/Or the environment. The Act categories designaIed specifies that the Committee's CommitteeStaff recommendations to the Administrator Ace1oniIriIe_ CaldI...ge1I1c;1y.UuI8genIciIy, CarolA. Mapes,ExecuUveSecretory". will be in the form of a list [Section 4(e) Teratogenicity. Ovonic Effects, £PdemIob1Y Walter G,Rosen,ActingE:tecuUva Priority List] to be published in the AniIne and QIJoro.. ~ty, MuI8gIriciIy, .Secretary." Federal Register. The Committee also is 8r0fn0... and/« TeratogenIdty. QInric
Load more

Recommended publications
  • Novel Aspects in the Preparation of Phorone 2
    Novel Aspects in the Preparation of Phorone Maria Konieczny* and George Sosnovsky Department of Chemistry, University of Wisconsin-Milwaukee, Milwaukee, Wisconsin 53201, USA Z. Naturforsch. 33b, 454-460 (1978); received Januaiy 4, 1978 Phorone, Mesityl Oxide, Triacetoneamine, Nitroxyls The condensation of acetone using anhydrous hydrogen chloride results after three weeks at room temperature, in a 15% yield of phorone (4) and a 75% yield of mesityl oxide (5). In the presence of one weight percent of the Lewis acid, aluminium chloride, the yield of 4 is increased to 39%. An increase in the amount of the Lewis acid, aluminium chloride, to ten weight percent results in a 22% yield of phorone (4) and a 68% yield of mesityl oxide (5). In the presence of one hundred weight percent of aluminium chloride, ( CH3)2C = CHC CHr C(CH3)2 (CH3)2 C=CHCCH3 in the absence of hydrogen chloride, the condensation produces a 62% yield of mesityl oxide (5) and no phorone (4). In the course of this investigation, two intermediates, 6 and 7 o u (CH5)2C CH2CCH5 (CHJ)2CCH2CCH2C(CH3)2 CI 6 7 were isolated and characterized for the first time. These intermediates are the actual products formed in the condensation of acetone with hydrogen chloride, and not the "free" phorone (4) and mesityl oxide (5). The conversion of 6 and 7 to 5 and 4, respectively, occurs during the isolation stage using a saturated solution of ethanolic potassium hydroxide. Since the discovery of the long-lived nitroxyl science. The most commonly used nitroxyls are radical [1], 2,2,6,6-tetramethyl-4-oxopiperidine-l- prepared by the catalytic oxidation of triacetone- oxyl, and its derivatives, considerably interest has amine (1) or its derivatives with 30% aqueous been shown in the application of these nitroxyls in hydrogen peroxide in the presence of sodium various areas of biological [2, 3] and polymer [3] tungstate [3, 4].
    [Show full text]
  • Gases Supported by IRI Analyzers
    Toll Free | 800.344.0321 Tel | 510.782.8100 Fax | 510.782.8101 www.InfraredIndustries.com The following is a list of gases and vapors that can be analyzed Gases Supported with certain gas analyzers from Infrared Industries. For any application of a particular gas, please contact us to by IRI Analyzers confi rm our ability to meet your needs. GAS/VAPOR GAS/VAPOR 1 Acetaldehyde (Ethanal) 30 trans2Butenal (Crotonaldehyde) 2 Acetaldehyde Diacetate (Ethylidene Diacetate) 31 2Butoxyetanol Skin (Butyl Cellosolve; Ethylene Glycol 3 Acetic Acid (Ethanoic Acid) Monobutyl Ether) 4 Acetophenone (Acetylbenzene; Methyl Phenyl Ketone) 32 Butyl Acetate 5 1Allyloxy2, 3Epoxypropane (A.G.E., Allyl Glycidyl Ether) 33 secButyl Acetate 6 1Aminobutane Skin (Butylamine) 34 tertButyl Acetate 7 Aminoethane (Ethylamine) 35 1tertButyl4Methylbenzene (ptertButyltoluene) 8 2Aminoethanol (Ethanolamine; Monoethanolamine) 36 Camphene 9 Aminomethane (Methylamine) 37 Carbon Monoxide (CO) 10 2Aminopropane (Isopropylamine) 38 Carbon Dioxide (CO2) 11 2Aminotoluene Skin (oMethylaniline; oToluidine) 39 Carbonyl Sulfi de (CO 5) 40 Carbonyl Sulfi de (Carbon Oxysulfi de) 12 Ammonia (NH3) 13 Aniline Skin (Aminobenzene; Phenylamine) 41 Carvone (Carvol) 14 Benzaldehyde (Benzenecarbonal) 42 Chlorobenzene (Monochlorobenzene; Phenyl Chloride) 15 Benzene 43 1Chlorobutane (nButyl Chloride) 16 Benzyl Acetate 44 Chlorodifl uoromethane (Freon 22) 17 Bromobenzene (Phenyl Bromide) 45 1Chloro2, 3EpoxypropaneSkin (αEpichlorohydrin) 18 1Bromobutane (nButyl Bromide) 46 Chloroethane (Ethyl Chloride)
    [Show full text]
  • Ketones and Quinones, Whether Or Not with Other Oxygen Function, and Their Halogenated, Sulphonated, Nitrated Or Nitrosated Derivatives
    29-VI Sub-Chapter VI KETONE-FUNCTION COMPOUNDS AND QUINONE-FUNCTION COMPOUNDS 29.14 - Ketones and quinones, whether or not with other oxygen function, and their halogenated, sulphonated, nitrated or nitrosated derivatives. - Acyclic ketones without other oxygen function : 2914.11 - - Acetone 2914.12 - - Butanone (methyl ethyl ketone) 2914.13 - - 4-Methylpentan-2-one (methyl isobutyl ketone) 2914.19 - - Other - Cyclanic, cyclenic or cycloterpenic ketones without other oxygen function : 2914.22 - - Cyclohexanone and methylcyclohexanones 2914.23 - - Ionones and methylionones 2914.29 - - Other - Aromatic ketones without other oxygen function : 2914.31 - - Phenylacetone (phenylpropan-2-one) 2914.39 - - Other 2914.40 - Ketone-alcohols and ketone-aldehydes 2914.50 - Ketone-phenols and ketones with other oxygen function - Quinones : 2914.61 - - Anthraquinone 2914.69 - - Other 2914.70 - Halogenated, sulphonated, nitrated or nitrosated derivatives The term “ ketones and quinones with other oxygen function ” means ketones and quinones which contain also one or more of the oxygen functions referred to in previous sub-Chapters (alcohol, ether, phenol, aldehyde, etc., functions). VI-2914-1 29.14 (A) KETONES These are compounds containing the group (>C=O), so-called “ carbonyl ” group, and can be represented by the general formula (R-CO-R1), in which R and R1 stand for alkyl or aryl radicals (methyl, ethyl, propyl, phenyl, etc.). Ketones may have two tautomeric forms, the true ketonic form (-CO-) and the enolic form (=C(OH)-), both of which fall in this heading. (I) Acyclic ketones. (1) Acetone (propanone) (CH3COCH3). Found in the products of the dry distillation of wood (methyl alcohol and crude pyroligneous acid), but is mainly obtained by synthesis.
    [Show full text]
  • Ep 0095783 A2
    Europaisch.es Patentamt European Patent Office ® Publication number: 0 095 783 A2 Office europeen des brevets ® EUROPEAN PATENT APPLICATION © Application number: 83105450.7 ® Int. CI.3: C 07 C 45/74, C 07 C 49/203, C 07 C B 01 J ^ 49/603, 29/04, @ Dateof filing: 01.06.83 B 01 J 21/16 (§) Priority: 02.06.82 US 384212 @ Applicant: UNION CARBIDE CORPORATION, Old Ridgebury Road, Danbury Connecticut 06817 (US) @@on ~ ... ,.... ,... nun on ^(7?) Inventor: Reichle, Walter Thomas, 158 Mountain Avenue, j^J/^ Warren New Jersey 07060 (US) @ Representative : Wuesthoff , Franz, Dr.-lng. et al, Patentanwalte Wuesthoff -v. Pechmann-Behrens-Goetz @ Designated Contracting States : DE FR GB Schweigerstrasse 2, D-8000 Miinchen 90 (DE) @ Catalyzed aldol condensations. Heat treated anionic clay mineral is an improved catalyst for the conversion of acetone to mesityl oxide and isophorone as well as for the aldol condensation of other carbonyl-contain- ing compounds. BACKGROUND OF THE INVENTION This invention pertains to aldol condensations catalyzed by heat-treated synthetic anionic clay minerals ana more particularly to the use of these catalysts ror the conversion of acetone to mesityl oxide and isophorone. The alaol condensation of active hydrogen-containing organic carbonyl compounds has found wide use in the chemical industry for the synthesis of a myriad of organic compounds. The earliest catalysts used for this conaensation reaction were bases, such as, alkali metal hydroxides which have been used for the production of 2-ethylhexanediol-l, 3, 2-ethylhexanol-l, diacetone alcohol, isopnorone, mesityl oxide, methylisoamyl ketone, and methylisobutyl ketone. A variety of methods has been disclosed in the literature for converting, for example, acetone by aldol condensation into a wide spectrum of products particularly isophorone and mesityl oxide which are used in industrial solvents and as chemical intermediates for resins, dyes, intersecticiaes.
    [Show full text]
  • 2011Al-Ghamdiphd.Pdf
    Al-Ghamdi, Khalaf (2011) An investigation of heterogeneous base catalysed acetone conversion. PhD thesis. http://theses.gla.ac.uk/2878/ Copyright and moral rights for this thesis are retained by the author A copy can be downloaded for personal non-commercial research or study, without prior permission or charge This thesis cannot be reproduced or quoted extensively from without first obtaining permission in writing from the Author The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the Author When referring to this work, full bibliographic details including the author, title, awarding institution and date of the thesis must be given Glasgow Theses Service http://theses.gla.ac.uk/ [email protected] 1 An investigation of heterogeneous base catalysed acetone conversion Khalaf Al-Ghamdi Submitted in fulfilment of the requirements for the Degree of Doctor of Philosophy School of Chemistry College of Science and Engineering 2011 2 Abstract A series of materials have been compared for their activity in the base catalysed condensation of acetone. Activities have been compared after extended times on stream (18 h) and under a H2 containing atmosphere at elevated pressure which is designed to mimic conditions applicable for the single stage transformation of acetone to MIBK. In general, catalysts without a strong hydrogenation function have been screened and so mesityl oxide is the dominant reaction product. However, 1%Pd5%MgO/SiO2 does exhibit high selectivity towards MIBK, demonstrating that single-stage conversion is possible under the conditions investigated. Catalytic activity is found to be a strong function of the material tested.
    [Show full text]
  • Prefeasibility Report Prasol Chemicals Private Limited, Village Honad, Dist Raigad, Maharashtra
    Prefeasibility Report Prasol Chemicals Private limited, Village Honad, Dist Raigad, Maharashtra Pre-Feasibility Report For Proposed Expansion of Synthetic Organic Chemicals Manufacturing unit By PRASOL CHEMICALS PRIVATE LIMITED Project under – Activity 5(f) Category - A Prepared By M/s Prasol Chemicals Private Limited Survey No. 8,13,15,16,25,75, Tal : Khalapur, Dist: Raigad Maharashtra, India Web: prasolchem.com 1 Prefeasibility Report Prasol Chemicals Private limited, Village Honad, Dist Raigad, Maharashtra Table of Contents 1 EXECUTIVE SUMMARY ............................................................................................................................. 4 2 INTRODUCTION OF THE PROJECT ............................................................................................................. 7 IDENTIFICATION OF THE PROJECT AND PROJECT PROPONENT ........................................................................ 7 BRIEF DESCRIPTION OF NATURE OF THE PROJECT ......................................................................................... 7 NEED OF THE PROJECT AND ITS IMPORTANCE TO THE COUNTRY AND/OR REGION ............................................ 9 DEMAND – SUPPLY GAP ................................................................................................................................ 9 IMPORTS VS INDIGENOUS PRODUCTION ............................................................................................................ 9 EXPORT POSSIBILITY ....................................................................................................................................
    [Show full text]
  • ACETONE Method No.: 69 Matrix: Air Target Concentration
    ACETONE Method no.: 69 Matrix: Air Target concentration: 1000 ppm (2375 mg/m3) (OSHA PEL) Procedure: Air samples are collected by drawing known volumes of air through standard size sampling tubes containing 130 mg of Carbosieve S-III (carbon based molecular sieve) adsorbent in the front section and 65 mg in the back section. The samples are desorbed with 1% dimethylformamide in carbon disulfide, in the presence of magnesium sulfate, and analyzed by GC with FID detection. Recommended air volume and sampling rate: 3 L and 0.05 L/min Reliable quantitation limit: 2.0 ppm (4.7 mg/m3) Standard error of estimate at the target concentration: 8.16% (Section 4.7) Status of method: Evaluated method. This method has been subjected to the established evaluation procedures of the Organic Methods Evaluation Branch. Date: March 1988 Chemist: Kevin Cummins Organic Methods Evaluation Branch OSHA Analytical Laboratory Salt Lake City, Utah 1 of 17 T-69-FV-01-8803-M 1. General Discussion 1.1 Background 1.1.1 History The previous OSHA method for sampling acetone is essentially the NIOSH method for sampling organic vapors (Ref. 5.1). In that method air samples are collected on coconut shell charcoal and analyzed by GC/FID following desorption with carbon disulfide. One of the major limitations of the NIOSH method is the poor stability of acetone and other ketones on charcoal (Refs. 5.2 - 5.6). Catalytic oxidation and irreversible adsorption (chemisorption) of ketones on the surface of charcoal is thought to account for the low recovery (Ref. 5.3). This effect is most pronounced for samples collected at high relative humidity (Ref.
    [Show full text]
  • OSHA Hazard Classification Guidance for Manufacturers, Importers, And
    HAZARD COMMUNICATION Hazard Classification Guidance for Manufacturers, Importers, and Employers OSHA 3844-02 2016 Occupational Safety and Health Act of 1970 “To assure safe and healthful working conditions for working men and women; by authorizing enforcement of the standards developed under the Act; by assisting and encouraging the States in their efforts to assure safe and healthful working conditions; by providing for research, information, education, and training in the field of occupational safety and health.” Material contained in this publication is in the public domain and may be reproduced, fully or partially, without permission. Source credit is requested but not required. This information will be made available to sensory- impaired individuals upon request. Voice phone: (202) 693-1999; teletypewriter (TTY) number: 1-877-889-5627. This publication provides a general overview of a particular standards-related topic. This publication does not alter or determine compliance responsibilities which are set forth in OSHA standards, and the Occupational Safety and Health Act. Moreover, because interpretations and enforcement policy may change over time, for additional guidance on OSHA compliance requirements, the reader should consult current administrative interpretations and decisions by the Occupational Safety and Health Review Commission and the courts. This guidance document is not a standard or regulation, and it creates no new legal obligations. It contains recommendations as well as descriptions of mandatory safety and health standards. The recommendations are advisory in nature, informational in content, and are intended to assist employers in providing a safe and healthful workplace. The Occupational Safety and Health Act requires employers to comply with safety and health standards and regulations promulgated by OSHA or by a state with an OSHA-approved state plan.
    [Show full text]
  • UH Chemical Hygiene Plan Appendix
    APPENDIX I EMERGENCY TELEPHONE NUMBERS and WORK COORDINATION EMERGENCY TELEPHONE NUMBERS CAMPUS EMERGENCY (24 Hours) x 66911 POISON CENTER 941-4411 Environmental Health & Safety Office (EHSO) Resources Laboratory Safety x 65180 Mark Burch, Chemical Hygiene Officer Biological Safety x 63197 Hubert Olipares, Biological Safety Officer Radiation Safety x 66475 Irene Sakimoto, Radiation Safety Officer Industrial Hygiene x 63204 Emma Kennedy, Industrial Hygienist Hazardous Waste Disposal x 63198 Tim O'Callaghan, Hazardous Material Management Officer HMMP Training/Auditing x 63201 Ray Welch, Environmental and Occupational Safety Specialist Diving Safety x 66420 Dave Pence, Diving Safety Officer Fire Safety x 64953 Jerry Egenberger, Fire Safety Officer Environmental Compliance x 69173 Joel Narusawa, Environmental Compliance Officer Facilities Planning and Management Office (FPMO) Work Coordination x 67134 APPENDIX II LABORATORY INSPECTION CHECKLIST LABORATORY CHECK-UP DATE:_______________________________ ___________ BLDG/ROOM: ____________________________________ PI/LAB SUP:______________________________________ I. GENERAL YES NO COMMENTS a. Laboratory work and storage areas are clean and orderly? b. Emergency notification procedures, contacts, and phone numbers are posted? c. First aid kit readily accessible? Adequately stocked? d. Aisles have minimum 28 inches clearance? e. Food is stored properly; i.e., not in refrigerators or cabinets used to store laboratory samples or chemicals? f. Bicycles are not stored in the laboratory? g. Safety guards are in place for equipment with moving parts (belts, fans, sawblades)? h. Multi-outlet connectors (power strips) are secured? i. Equipment cord insulation is intact; i.e., not cracked or frayed? j. Equipment is grounded? k. A trash container is specifically designated for glass? l. No trip hazards (e.g., cords, equipment, etc.)? m.
    [Show full text]
  • CLH Report Template
    CLH REPORT FOR 4-METHYLPENTAN-2-ONE CLH report Proposal for Harmonised Classification and Labelling Based on Regulation (EC) No 1272/2008 (CLP Regulation), Annex VI, Part 2 International Chemical Identification: 4-methylpentan-2-one; isobutyl methyl ketone EC Number: 203-550-1 CAS Number: 108-10-1 Index Number: 606-004-00-4 Contact details for dossier submitter: Environment Agency Austria, Spittelauer Lände 5, A-1090 Vienna on behalf of the Austrian Competent Authority (Austrian Federal Ministry of Agriculture, Forestry, Environment and Water Management, Stubenring 1, 1010 Vienna, Austria) Version number: 02 Date: September 2018 CLH REPORT FOR 4-METHYLPENTAN-2-ONE CONTENTS 1 IDENTITY OF THE SUBSTANCE........................................................................................................................1 1.1 NAME AND OTHER IDENTIFIERS OF THE SUBSTANCE...............................................................................................1 1.2 COMPOSITION OF THE SUBSTANCE..........................................................................................................................1 2 PROPOSED HARMONISED CLASSIFICATION AND LABELLING............................................................2 2.1 PROPOSED HARMONISED CLASSIFICATION AND LABELLING ACCORDING TO THE CLP CRITERIA............................2 3 HISTORY OF THE PREVIOUS CLASSIFICATION AND LABELLING ......................................................4 4 JUSTIFICATION THAT ACTION IS NEEDED AT COMMUNITY LEVEL.................................................4
    [Show full text]
  • Kinetic Study of the Polycondensation of Acetone to Produce Isophorone Adopting Alumina and Magnesia As Catalyst
    Kinetic Study of the Polycondensation of Acetone to Produce Isophorone Adopting Alumina and Magnesia as Catalyst Andrea Sliepcevich, Davide Moscatelli and Simone Gelosa Dept. di Chimica, Materiali e Ingegneria Chimica “G. Natta” Politecnico di Milano Via Mancinelli 7 – 20131 Milano, Italy Isophorone (3,5,5-Trimethyl-2-cyclohexene- 1-one) is an α,β-unsaturated ketone of remarkable industrial interest, produced as a consequence of the aldolic condensation of three acetone molecules. Isophorone is used extensively as a solvent in some printing inks, paints, lacquers, adhesives, vinyl resins, copolymers, coatings, finishes, and pesticides, in addition to being used as a chemical intermediate of organic synthesis. This important chemical molecule is produced both by an homogeneous catalytic process as well as an heterogeneous one. In the homogeneous catalysis isophorone is produced in liquid phase with a mixture of acetone, water and KOH (0.1%) at about 200 °C and 35 bar. In the heterogeneous process, acetone reacts over a catalytic bed at temperatures comprised between 200 and 300 °C and pressure of about 5 bar. The main advantages to operate in heterogeneous phase consist in the absence of a corrosive alkaline atmosphere, in the facility of separation of the catalyst from the reaction products and in its recovery. In this work has been adopted a continuous fixed bed reactor to study the heterogeneous production of isophorone using a moderately basic catalyst constituted by a 10% of magnesia (MgO) over alumina. 1. Introduction As a result of the process of polycondensation of acetone, different intermediates of reaction can be identified. Some of these are the mesityl oxide and their isomer (isomesityl oxide), that are products of remarkable industrial interest because of they can be easily converted into methyl isobutyl ketone (MIBK).
    [Show full text]
  • O-Ring Chemical Compatibility
    O-Ring Chemical Compatibility buna-n | capfe | chemraz® | epdm | fetfe | kalrez® | silicone | viton® a The information in this document is intended to be for general reference purposes only and is not intended to be a specific recommendation for any individual application. Any reliance on information is therefore at the user‘s own risk. In no event will Ace Glass Incorporated be liable for any loss, damage, claim or expense directly or indirectly arising or resulting from the use of any information provided in this document. While every effort is made to ensure the accuracy of information contained herewith, Ace Glass www.aceglass.com Incorporated cannot warrant the accuracy or completeness of information. Specifications are subject to change without prior notice. Although they are represented to be accurate, it is best to verify product specifications with ACE prior to purchase in the event they have been changed since publication of this catalog. Table of Contents Elastomers .....................................................4-5 Chemical Compatibility ................................ 6-20 Cross Reference .............................................. 21 Size Reference ........................................... 22-31 O-Rings Kalrez ........................................................ 32 Chemraz .................................................... 33 CAPFE ....................................................... 34 Viton A .................................................. 36-37 Silicone ................................................
    [Show full text]