in e Qu am a n li ty d e G t l s a

u

s

r

s

T

w

a A r e Catalogue 2011 A GLASS APART

Quality Manufacturers & Suppliers of : Laboratory Glassware & Plasticware INNACLE SCIENTIFIC INDUSTRIES

FOREWORD

We feel immense pleasure to forward herewith the catalogue 2011-12 of 'INSIL' Brand Glassware and Plasticware throughout India and abroad.

The Products listed in this Catalogue are the usual standard equipments required in any Modern Laboratory. However we are in a position to manufacture or supply any other type of Laboratory Instruments & Glassware equipments fabricated from Borosilicate/ Borosil glass as per design/ demand of the customers.

Please Register our name as a one of your regular suppliers. This Catalogue covers a wide range of apparatus required for Colleges, Universities, Industries, Research & Development Organizations.

The encouragement accorded by our valued customers is our greatest assets and we are confident of receiving the same co-operation in future also as in the past years.

We, at our works produce quality apparatus to suit everyone's requirement.

While placing your valued order, please mention our catalogue numbers. We shall be pleased to execute the orders to the entire satisfaction of our clients.

With kind regards.

CEO

Pinnacle Scientific Industries Index

CONTENTS PAGE NO. CONTENTS PAGE NO. BEAKERS 1 to 1 FRACTIONALATING COLUMNS 83 to 84 Low form/ Tall form, Micro Vigreux, Dufton, Columns, Packing, Support, Rod & Disc BOTTLES 2 to 8 SINTERED GLASSWARE 85 to 88 Weighing, Wide Mouth, Specific Gravity, Reagent, Wide Filtering Apparatus Witt's, Various, Crucible, Bucher Funnel, Mouth, Narrow Mouth, With I/C Stopper, Screw Cap, Amber, Millipore Type, Mamberane Filter, Tube Sealed, Conical Filter, Roller, Dropping, Aspirator, Serum, Woulf, Maccartney, B.O.D., Gas Distillation Wash, Gas Washing, Specimen Jar INTERCHANGEABLE GROUND JOINTS ASSEM. 89 to 97 BURRETTE 9 to 17 Distillation Apparatus, Assemblies, Various, Reflux, Reaction, Pinch Clip, Rota Flow, PTFE, Soild Plug Glass Key, Stop Cock, Prepration, Vaccum, kjeldhal, Gas Evolution, Steam, Recovery, 2- Way, 3 Way, Oblique Bore, Straight Bore, With Over Flow Solvent Recovery, Fractionation, Alkoxyle & Alkylimino, Micro Cup, Micro, Automatic, Amber, Volumetric/ Measuring Accety, Mecury, Climbing Film Evaporator, Tucker Gas CYLINDER MESURING 18 to 22 Generator, Cavett Blood Test, Freeze Drying, Kozellea & Hine Graduated Round, Hexagonal, Round Base, Stoppered, Blood Test, Carbaryl Content, Steam Distillation, Blood Test Amber, Rain Measure, Conical Measure, Crow Receiver, DESSICATORS 98 to 98 Nessler Plain Vaccum PIPETTES 23 to 27 WATER STILL 99 to 99 Volumetric/ Measuring, Automatic, Micro litre, Serological, Milt Automatic, Electrical, Various Testing, Alcohol, Acid Measure, Pasteur, Tilt Measure, ESR WATER DISTILLATION 100 to 101 PETRI DISH 28 to 28 EXTRACTION APPARATUS 102 to 103 CONE 29 to 29 Soxhlet, Spare Imhoff, Sediment, Sharp Tip/ Blunt Tip CHAROMATO GRAPHIC APPARATUS 103 to 110 TUBES 29 to 35 Columns, Gas tight, Micro Litre Syringe, Plain Silicon Septa, Culture, Screw Caps, Leighton, Stoppered, Graduated, PTFE/ Silicon Bonded Septa, Vials, Caps, Seals, Crimping Blood Sugar, Melting Point, Centrifuge, Stokes, Test Tubes, Tools, Absorption Assembly, Column with Sintered Disc Pressure Tubes MOISTURE DETERMINATION APPARATUS 110 to 112 VISCOMETER 36 to 37 Dean & Stark, Soil Moisture Gauge, Receiver, Gauge Ostwald’s, U Tube, Suspended Level, Reverse Flow, Cannon ESSENTIAL OIL DETERMINATION APP. 112 to 112 Fenske, Falling Sphere Clevenger, Lighter than/ Heavier than Water CONDENSOR 38 to 43 NITROGEN DETERMINATION APPARATUS 113 to 115 Air, Liebig, Coil, Reversible, Double Coil, Davies, Jacketed, Macro kjeldhl, Macro Nitrogen, Semi Micro kjeldahl, Allihn, Inland Revenue, Friedrich Ether, Cold Finger STOPCOCKS/ HIGH VACCUM 115 to 121 FLASK 44 to 59 Straight Bore, Oblique bore, 3 way, T Bore, Double Oblique Reaction, Lids, Flat Bottom, Round Bottom with or without Bore, Verticle Drip, C Bore, For Burrette, Saparating Funnel, Joints, Two- Three necks, Conical with or without joint, Screw Aspirators, Kipps Apparatus, Straight Bore, Single, Double, Cap, Filtration, Kieldhal, Evaporating, Flourentine, Vigreux, Threeway, Double Oblique, T- Type, V- Type, L -Type, Mercury Clasin, Distillation, iodine, Erlemmeyer, Boiling, Measuring/ Cup, Straight Bore, Oblique Bore, T or Y Bore Volumetric, Sugar Estimation, Kohirausil Mud, Saybolt Viscosity, Cassia, Lechatelier, Arm Flask, Reaction Flask, Lid THERMOMETER 121 to 124 Chemical, Precision, Immersion, Low Temperature, Oven/ STANDARD JOINT, STOPPER/ ADAPTORS 60 to 66 Incubator, Straight, Max.- Min., Wet & Dry, Wall, Clinical, Sockets, Cones, Plain/ Grip, Spherical, Stoppers, Hollow, Brewer's Soll, Diary, Psyhrometer, Bi- Metal Dial Hexagonal, Solid, Reducation Adaptor, Expansion, Conical, PLASTICWARE 125 to 136 Multiple, Swan Neck, Receiver, Straight Delivery, Perkin Beakers, Buchner Funnel, Stop cock, Wash Bottle, Centrifugal STILL HEAD/ SPLASH HEAD 67 to 69 Tub, Conical Flask, Conical Measure, Connectors T/ Y, Recovery, Bends, Head, Claisen Head, Splash Head, Straight, Dessicators, Kipp’s Apparatus, Laboratory Tray, Measuring Sloping, Vertical, Steam Distillation Head, Anti Foaming Cylinder, Float Rack, Funnel Holder, Funnel, Vaccum Bottle, MISCELLANEOUS FITTING 70 to 72 Square Bottle, Draining Basket, Dropping Bottle, Fisher Adapters, U Tube, Drying Tube, Thermometer pocket, Air leak Clamp, Flask Stand, Measuring Jug, Petri Dish, Reagent Tube/ Gas, Test Tube with Socket, Air/ Steam Inlet Tube Reservoir, Retort Stand, RIA Vial, Separating Funnel, Various Racks, Reagent Bottle, Pipette Pump, Stands, Plantation Pots, STIRRERS 73 to 75 Stirring Rods, Test Tube Basket, Cap, Stand, Screw Cap Test Teflon Bloded, Link, Cullapsible, Fixed Paddle, Anchor, Tube, Slide Box, Rack, Soft Loop Sterili, Spatula, Specimen Centrifugal, Semi Micro Guides, Mercury Seal & Guide, Jar, Universal Multirack, Urine Container, Utlility Tray, Glands, Stuffing Box Volumetric Flask. FUNNEL 76 to 82 Filtering, Powder, Separating, Dropping, Pressure Equalising, Amber, With I/C Stopper, Plug Type, Micro, Thistle For Item wise Index- see page no. 137 onwards

BEAKERS

Beakers, Low form, with spout, graduated, accuracy of graduation ± 5%, made from borosilicate 33exp. glass

Cat. No. Capacity Graduation ml. Interval ml. 100.100.1 25 10 100.100.2 50 10 100.100.3 100 25 100.100.4 150 25 100.100.5 250 50 100.100.6 400 50 100.100.7 500 100 100.100.8 600 100 100.100.9 1000 200 100.100.10 2000 200

Beakers, Tall form, with spout, graduated, accuracy of graduation ± 5%, made from borosilicate 33exp. glass

Cat.No. Capacity ml. 100.101.1 50 100.101.2 100 100.101.3 150 100.101.4 250 100.101.5 400 100.101.6 500 100.101.7 600 100.101.8 1000 100.101.9 2000

Beakers, Micro, Low form with Spout

Cat. No. Capacity (ml.) 100.102.1 2 100.102.2 5 100.102.3 10 100.102.4 25

[email protected] I www.pinnaclescientific.com 1 BOTTLES

Bottles, Weighing, with interchangeable stopper

Cat. No. O.D.x Ht. Capacity mm. ml. 101.100.1 Squat form 40x30 20 101.100.2 50x25 20 101.100.3 50x35 35 101.100.4 50x50 50 101.100.5 60x30 40 101.100.6 Tall form 20x40 5 101.100.7 25x50 15 101.100.8 30x60 25 101.100.9 40x80 60

Bottles, Weighing, Cap Type

Cat. No. O.D.x Ht. Capacity mm. ml. 101.101.1 Squat Form 38x30 25 101.101.2 45x30 45 101.101.3 Tall form 18x40 7 101.101.4 28x50 25 101.101.5 38x60 55 101.101.6 45x80 100

Bottles, Wide Mouth, with interchangeable stopper for 15 mm. Suba Seals

Cat. No. O.D.x Ht. Capacity mm. ml. 101.102.1 60x30 25 101.102.2 80x40 60 101.102.3 80x50 100 101.102.4 100x60 250 101.102.5 130x75 500 101.102.6 180x90 1000

Bottles, Weighing, Lunge’s, for weighing Corrosive liquids

Cat. No. Description

101.103.1 as above

2 [email protected] I www.pinnaclescientific.com BOTTLES

Bottles, Specific Gravity, ground interchangeable capillary stopper, Class ‘A’

Cat. No. Capacity ml. 101.104.1 5 101.104.2 10 101.104.3 20 101.104.4 25 101.104.5 50 101.104.6 100

Bottles, Specific Gravity, ground in capillary stopper with B10 joint.

Cat. No. Capacity ml. 101.105.1 5 101.105.2 10 101.105.3 20 101.105.4 25 101.105.5 50 101.105.6 100

Bottles, Specific Gravity, with Teflon stopper, B10 joint.

Cat. No. Capacity ml. 101.106.1 5 101.106.2 10 101.106.3 20 101.106.4 25 101.106.5 50 101.106.6 100

Bottles, Specific Gravity, with ground in thermometer range 00C to 500C

Cat. No. Capacity ml. 101.107.1 10 101.107.2 25 101.107.3 50 101.107.4 100

[email protected] I www.pinnaclescientific.com 3 BOTTLES

Bottles, Specific Gravity, weld, with Cap

Cat. No. Capacity Inner Outer ml. joint joint 101.108.1 10 B10 B14 101.108.2 25 B10 B14 101.108.3 50 B10 B14

Bottles, Specific Gravity, Hubbard, Conical, 25 ml. Cap. Cat. No. Description 101.109.1 as above

Bottles, Specific Gravity, Hubbard, Cylindrical, 25 ml. Cap.

Cat. No. Description 101.110.1 as above

Bottles, Reagent, Narrow Mouth, with inter changeable flat head Stopper. Glass/PP

Cat. No. Capacity Joint ml. 101.111.1 30 B14 101.111.2 60 B14 101.111.3 125 B19 101.111.4 250 B19 101.111.5 500 B24 101.111.6 1000 B29 101.111.7 2000 B34 101.111.8 5000 B40

Bottles, Reagent, Narrow Mouth with interchangeable Stopper, AMBER Cat. No. Cap. ml. Joint 101.112.1 30 B14 101.112.2 60 B14 101.112.3 125 B19 101.112.4 250 B19 101.112.5 500 B24 101.112.6 1000 B29 101.112.7 2000 B34 101.112.8 5000 B40

4 [email protected] I www.pinnaclescientific.com BOTTLES

Bottles, Reagent, Wide Mouth, with interchangeable hollow Stopper

Cat. No. Capacity Joint ml. 101.113.1 30 B19 101.113.2 60 B24 101.113.3 125 B29 101.113.4 250 B34 101.113.5 500 B40 101.113.6 1000 B45 101.113.7 2000 B45 101.113.8 5000 B50 101.113.9 10000 B55 101.113.10 20000 B55 Bottles, Reagent, AMBER, Wide Mouth, with interchangeable hollow Stopper

Cat. No. Capacity Joint ml. 101.114.1 30 B19 101.114.2 60 B24 101.114.3 125 B29 101.114.4 250 B34 101.114.5 500 B40 101.114.6 1000 B45 101.114.7 2000 B45 101.114.8 5000 B50

Bottles, Reagent, Narrow Mouth, with bakelite screw cap and teflon liner

Cat. No. Capacity ml. 101.115.1 30 101.115.2 60 101.115.3 125 101.115.4 250 101.115.5 500 101.115.6 1000 101.115.7 2000 101.115.8 4000 101.115.9 10000 101.115.10 20000

Bottles, Reagent, Wide Mouth, with Bakelite screw cap and teflon liner

Cat. No. Capacity ml. 101.116.1 30 101.116.2 60 101.116.3 125 101.116.4 250 101.116.5 500 101.116.6 1000 101.116.7 2000 101.116.8 5000 101.116.9 10000 101.116.10 20000 [email protected] I www.pinnaclescientific.com 5 BOTTLES

Bottles, Reagent, clear, wide mouth with Polypropylene Blue screw cap and pouring ring, repeatedly auto cleavable, graduated

Cat.No. Capacity ml. 101.117.1 100 101.117.2 250 101.117.3 500 101.117.4 1000 101.117.5 2000 101.117.6 5000 101.117.7 10000 101.117.8 20000

Bottles, Reagent, AMBER Colour, wide mouth with Polypropylene Blue screw cap and pouring ring, repeatedly auto cleavable, graduated

Cat. No. Capacity

101.118.1 100 101.118.2 250 101.118.3 500 101.118.4 1000 101.118.5 2000

Bottles, Roller, 51mm Short - Skirt screw Cap

Cat. No. Growth Area cm2 101.119.1 670 101.119.2 950 101.119.3 1170 101.119.4 1330 101.119.5 1585

Bottles, Roller, with indented growth area 805cm2 with screw Cap

Cat. No. Description 101.120.1 as above

Bottles, Dropping, fitted with ground in interchangeable stopper and rubber teat

Cat. No. Capacity ml. 101.121.1 30 101.121.2 60 101.121.3 125 101.121.4 250

6 [email protected] I www.pinnaclescientific.com BOTTLES

Bottles, Aspirator, (lavelline Bottle) for carbon burette capacity 1000ml.

Cat. No. Description 101.122.1 as above

Bottles, Aspirator, (lavelline Bottle) for carbon burette capacity 1000ml. Cat. No. Description 101.122.2 long form

Bottles, Serum, with squat type standard neck Cat. No. Capacity Neck I.D. Body dia ml. mm. mm. 101.123.1 1 5 12 101.123.2 3.5 7 18 101.123.3 5 13 22 101.123.4 10 13 25 101.123.5 20 22 32 101.123.6 50 22 44

Bottles, Wolf, with three standard joint necks

Cat. No. Capacity Joint ml. 101.124.1 250 B14 101.124.2 500 B19 101.124.3 1000 B24

Bottles, Mac-Cartney, Complete with Aluminum Cap.

Cat. No. Capacity ml. 101.125.1 15 101.125.2 30 101.125.3 60

[email protected] I www.pinnaclescientific.com 7 BOTTLES

Bottle, B.O.D., with interchangeable stopper

Cat. No. Capacity ml. 101.126.1 125 101.126.2 300

Bottles, Wash, Complete with Interchangeable Stopper Cat. No. Cap. Total Ht. Joint ml. mm. 101.127.1 250 225 B24 101.127.2 500 280 B24 101.127.3 1000 315 B29

Bottles, Gas Washing, with Interchangeable fitting

Cat. No. Cap. ml. Joint 101.128.1 125 B29 101.128.2 250 B29 101.128.3 500 B29 101.128.4 1000 B29

Specimen Jar, with Screw Cap and Rubber Liners

Cat. No. Cap. Dia. x Ht. ml. mm. 101.129.1 200 60 x 110 101.129.2 250 65 x 120 101.129.3 250 75 x 80

8 [email protected] I www.pinnaclescientific.com BURETTES

Burettes, Pinch Cock with Nozzle and Rubber tubing, Accuracy as per class ‘B’ of I.S 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.100.1 10 0.05 0.05 102.100.2 25 0.10 0.10 102.100.3 50 0.10 0.10 102.100.4 100 0.20 0.20

Burettes, Straight Bore with Glass Key Stopcock, Accuracy as per class ’B’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.101.1 1 0.01 0.01 102.101.2 2 0.02 0.02 102.101.3 5 0.02 0.02 102.101.4 10 0.05 0.05 102.101.5 25 0.10 0.10 102.101.6 50 0.10 0.10 102.101.7 100 0.20 0.20 Burette 1 to 10 ml. with cup top.

Burettes, Straight Bore with Glass Key Stopcock, AMBER, Accuracy as per class ’B’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.102.1 1 0.01 0.01 102.102.2 2 0.02 0.02 102.102.3 5 0.02 0.02 102.102.4 10 0.05 0.05 102.102.5 25 0.10 0.10 102.102.6 50 0.10 0.10 102.102.7 100 0.20 0.20 Burette 1 to10 ml. with cup on top.

Burettes, Straight Bore with Glass key Stopcock, Accuracy as per class ‘A’ of I.S.1997 : 1967 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.103.1 1 0.01 0.006 102.103.2 2 0.02 0.010 102.103.3 5 0.02 0.010 102.103.4 10 0.05 0.020 102.103.5 25 0.10 0.050 102.103.6 50 0.10 0.050 102.103.7 100 0.20 0.100 Burette 1 to 10 ml. with cup on top. [email protected] I www.pinnaclescientific.com 9 BURETTES

Burettes, Straight Bore with Glass key Stopcock, AMBER, Accuracy as per class ‘A’ of I.S. 1997 : 1967 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.104.1 1 0.01 0.006 102.104.2 2 0.02 0.010 102.104.3 5 0.02 0.010 102.104.4 10 0.05 0.020 102.104.5 25 0.10 0.050 102.104.6 50 0.10 0.050 102.104.7 100 0.20 0.100 Burette 1 to 10 ml. with cup on Top.

Burettes, Screw Type Rota flow Stopcock with PTFE (Teflon) Key, Accuracy as per class ’B’ of I.S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.105.1 1 0.01 0.01 102.105.2 2 0.02 0.02 102.105.3 5 0.02 0.02 102.105.4 10 0.05 0.05 102.105.5 25 0.10 0.10 102.105.6 50 0.10 0.10 102.105.7 100 0.20 0.20 1 to 10 ml. with Cup on Top.

Burettes, Screw Type Rota flow Stopcock with PTFE (Teflon) Key, AMBER, Accuracy as per class ’B’ of I.S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.106.1 1 0.01 0.01 102.106.2 2 0.02 0.02 102.106.3 5 0.02 0.02 102.106.4 10 0.05 0.05 102.106.5 25 0.10 0.10 102.106.6 50 0.10 0.10 102.106.7 100 0.20 0.20 1 to 10 ml. with Cup on Top.

Burettes, Screw Type Rota flow Stopcock with PTFE (Teflon) Key, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.107.1 1 0.01 0.006 102.107.2 2 0.02 0.010 102.107.3 5 0.02 0.010 102.107.4 10 0.05 0.020 102.107.5 25 0.05 0.050 102.107.6 50 0.10 0.050 102.107.7 100 0.20 0.100 1 to 10 ml. with Cup on Top.

10 [email protected] I www.pinnaclescientific.com BURETTES

Burettes, Screw Type Rota flow Stopcock with PTFE (Teflon) Key, AMBER, Accuracy as per class ’A’ of I. S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.108.1 1 0.01 0.006 102.108.2 2 0.02 0.010 102.108.3 5 0.02 0.010 102.108.4 10 0.05 0.020 102.108.5 25 0.05 0.050 102.108.6 50 0.10 0.050 102.108.7 100 0.20 0.100 1 to 10 ml. with Cup on Top

Burettes with Straight bore, PTFE key Stopcock (Teflon), Accuracy as per class ’B’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.109.1 1 0.01 0.01 102.109.2 2 0.02 0.02 102.109.3 5 0.02 0.02 102.109.4 10 0.05 0.05 102.109.5 25 0.10 0.10 102.109.6 50 0.10 0.10 102.109.7 100 0.20 0.20 1 to 10 ml. with Cup on Top

Burettes with Straight bore, PTFE key Stopcock (Teflon), AMBER, Accuracy as per class ’B’ of I. S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.110.1 1 0.01 0.01 102.110.2 2 0.02 0.02 102.110.3 5 0.02 0.02 102.110.4 10 0.05 0.05 102.110.5 25 0.10 0.10 102.110.6 50 0.10 0.10 102.110.7 100 0.20 0.20 1 to 10 ml. with Cup on Top

Burette with straight Bore, PTFE key stopcock (Teflon), Accuracy as per class ‘A’ of I. S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.111.1 1 0.01 0.006 102.111.2 2 0.02 0.010 102.111.3 5 0.02 0.010 102.111.4 10 0.05 0.020 102.111.5 25 0.05 0.050 102.111.6 50 0.10 0.050 102.111.7 100 0.20 0.100 1 to 10 ml. with Cup on Top [email protected] I www.pinnaclescientific.com 11 BURETTES

Burette with straight Bore, PTFE key stopcock (Teflon), AMBER, Accuracy as per class ‘A’ of I.S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.112.1 1 0.01 0.006 102.112.2 2 0.02 0.010 102.112.3 5 0.02 0.010 102.112.4 10 0.05 0.020 102.112.5 25 0.05 0.050 102.112.6 50 0.10 0.050 102.112.7 100 0.20 0.100 1 to 10 ml. with Cup on Top

Burettes with Double Oblique Bore, Stopcock 3-Way, Accuracy as per class ’B’ of I.S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.113.1 10 0.05 0.05 102.113.2 25 0.10 0.10 102.113.3 50 0.10 0.10 102.113.4 100 0.20 0.2

Burettes with Double Oblique Bore, Stopcock 3-Way, AMBER, Accuracy as per class ’B’ of I.S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.114.1 10 0.05 0.05 102.114.2 25 0.10 0.10 102.114.3 50 0.10 0.10 102.114.4 100 0.20 0.2

Burettes with Double Oblique Bore, Stopcock 3-Way, Accruacy as per class ’A’ of I.S. 1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.115.1 10 0.02 0.02 102.115.2 25 0.05 0.05 102.115.3 50 0.10 0.05 102.115.4 100 0.20 0.10

12 [email protected] I www.pinnaclescientific.com BURETTES

Burettes with Double Oblique Bore, Stopcock 3-Way, AMBER, Accuracy as per class ’A’ of I.S. 1997 : 1982

Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.116.1 10 0.02 0.02 102.116.2 25 0.05 0.05 102.116.3 50 0.10 0.05 102.116.4 100 0.20 0.10

Burette with Double oblique Bore, screw type Rota flow Stopcock with PTFE (Teflon) key, Accuracy as per class ‘B’ of I.S.1997 : 1982

Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.117.1 10 0.05 0.05 102.117.2 25 0.10 0.10 102.117.3 50 0.10 0.10 102.117.4 100 0.20 0.20

Burette with Double oblique Bore, screw type Rota flow Stopcock with PTFE (Teflon) key, AMBER, Accuracy as per class ‘B’ of I.S.1997 : 1982

Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.118.1 10 0.05 0.05 102.118.2 25 0.10 0.10 102.118.3 50 0.10 0.10 102.118.4 100 0.20 0.20

Burette with Double oblique Bore, screw type Rota flow Stopcock with PTFE (Teflon) Key, Accuracy as per class ’A’ of I.S.1997 : 1967.

Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.119.1 10 0.05 0.02 102.119.2 25 0.10 0.10 102.119.3 50 0.10 0.10 102.119.4 100 0.20 0.20

[email protected] I www.pinnaclescientific.com 13 BURETTES

Burette with Double oblique Bore, screw type Rota flow Stopcock with PTFE (Teflon) Key, AMBER, Accuracy as per class ’A’ of I.S.1997 : 1967 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.120.1 10 0.05 0.02 102.120.2 25 0.10 0.10 102.120.3 50 0.10 0.10 102.120.4 100 0.20 0.20

Burette with Double oblique Bore, PTFE (Teflon) Key stopcock, 3 way, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.121.1 10 0.05 0.02 102.121.2 25 0.05 0.05 102.121.3 50 0.10 0.05 102.121.4 100 0.20 0.10

Burette with Double oblique Bore, PTFE (Teflon) Key stopcock, 3 way, AMBER, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.122.1 10 0.05 0.02 102.122.2 25 0.05 0.05 102.122.3 50 0.10 0.05 102.122.4 100 0.20 0.10

Burette, Automatic Zero with Over Flow Cup, Double oblique Bore, stopcock, 3 way, Accuracy as per class ’B’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.123.1 10 0.05 0.05 102.123.2 25 0.10 0.10 102.123.3 50 0.10 0.10 102.123.4 100 0.20 0.20

14 [email protected] I www.pinnaclescientific.com BURETTES

Burette, Automatic Zero with Over Flow Cup, Double oblique Bore, stopcock, 3 way, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.124.1 10 0.05 0.02 102.124.2 25 0.05 0.05 102.124.3 50 0.10 0.05 102.124.4 100 0.20 0.10

Burette, Automatic Zero with Over Flow Cup, Double Oblique Bore, screw type Rota flow stopcock with PTFE (Teflon) key, 3 way, Accuracy as per class ’B’ of I.S.1997 : 1967 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.125.1 10 0.05 0.05 102.125.2 25 0.05 0.10 102.125.3 50 0.10 0.10 102.125.4 100 0.20 0.20

Burette, Automatic Zero with Over Flow Cup, Double Oblique Bore, PTFE (Teflon) key stopcock, 3 way, Accuracy as per class ’A’ of I.S.1997 : 1982. Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.126.1 10 0.05 0.02 102.126.2 25 0.05 0.05 102.126.3 50 0.10 0.05 102.126.4 100 0.20 0.10

Burette, Automatic Zero with Over Flow Cup, Double Oblique Bore, PTFE (Teflon) key stopcock, 3 way, AMBER, Accuracy as per class ’A’ of I.S.1997 : 1982. Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.127.1 10 0.05 0.02 102.127.2 25 0.05 0.05 102.127.3 50 0.10 0.05 102.127.4 100 0.20 0.10

Burettes, Micro, Automatic Filling Device with Reservoir Accuracy as per class ’B’ of I.S.1997 : 1982 Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 102.128.1 1 0.01 0.01 102.128.2 2 0.02 0.02 102.128.3 5 0.02 0.02 102.128.4 10 0.05 0.05 [email protected] I www.pinnaclescientific.com 15 BURETTES

Burette, Automatic Zero, mounted on Reservoir with Glass Stopcock, Rubber bellow, Accuracy as per class ’B’ of I.S.1997 : 1982 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.129.1 10 0.05 0.05 102.129.2 25 0.10 0.10 102.129.3 50 0.10 0.10 102.129.4 100 0.20 0.20

Burette, Automatic Zero, mounted on Reservoir with Glass stopcock, Rubber bellow, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.130.1 10 0.05 0.02 102.130.2 25 0.05 0.05 102.130.3 50 0.10 0.05 102.130.4 100 0.20 0.10

Burette, Automatic Zero, mounted on Reservoir with screw type Rota flow Stopcock with PTFE (Teflon) Key, Rubber bellow, Accuracy as per class ’B’ of I.S.1997 1982. Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.131.1 10 0.05 0.05 102.131.2 25 0.10 0.10 102.131.3 50 0.10 0.10 102.131.4 100 0.20 0.20

Burette, Automatic Zero, mounted on Reservoir with screw type Rota flow Stopcock with PTFE (Teflon) Key, Rubber bellow, AMBER, Accuracy as per class ’B’ of I.S.1997 1982. Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.132.1 10 0.05 0.05 102.132.2 25 0.10 0.10 102.132.3 50 0.10 0.10 102.132.4 100 0.20 0.20

16 [email protected] I www.pinnaclescientific.com BURETTES

Burette, Automatic Zero, mounted on Reservoir with screw type Rota flow Stopcock with PTFE (Teflon) Key, Rubber bellow, Accuracy as per class ’A’ of I.S.1997 1982 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.133.1 10 0.05 0.02 102.133.2 25 0.05 0.05 102.133.3 50 0.10 0.05 102.133.4 100 0.20 0.10

Burette, Automatic Zero, mounted on Reservoir with screw type Rota flow Stopcock with PTFE (Teflon) Key, Rubber bellow, AMBER, Accuracy as per class ’A’ of I.S.1997 1982 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.134.1 10 0.05 0.02 102.134.2 25 0.05 0.05 102.134.3 50 0.10 0.05 102.134.4 100 0.20 0.10

Burette, Automatic zero, mounted on Reservoir with PTFE (Teflon) keystopcock, rubber bellow, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.135.1 10 0.02 0.02 102.135.2 25 0.05 0.05 102.135.3 50 0.10 0.05 102.135.4 100 0.20 0.10

Burette, Automatic zero, mounted on Reservoir with PTFE (Teflon) key stopcock, rubber bellow, AMBER, Accuracy as per class ’A’ of I.S.1997 : 1982 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 102.136.1 10 0.02 0.02 102.136.2 25 0.05 0.05 102.136.3 50 0.10 0.05 102.136.4 100 0.20 0.10

[email protected] I www.pinnaclescientific.com 17 CYLINDER MEASURING

Cylinders, Measuring, with spout, Hexagonal Base and break resistant collar, class ‘A’ with work certificate Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.100.1 5 0.1 0.05 103.100.2 10 0.2 0.10 103.100.3 25 0.5 0.25 103.100.4 50 1.0 0.50 103.100.5 100 1.0 0.50 103.100.6 250 2.0 1.00 103.100.7 500 5.0 2.50 103.100.8 1000 10.0 5.00 103.100.9 2000 20.0 10.00

Cylinders, Measuring, AMBER, with spout, Hexagonal Base and break resistant collar, class ‘A’ with work certificate Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.101.1 5 0.1 0.05 103.101.2 10 0.2 0.10 103.101.3 25 0.5 0.25 103.101.4 50 1.0 0.50 103.101.5 100 1.0 0.50 103.101.6 250 2.0 1.00 103.101.7 500 5.0 2.50 103.101.8 1000 10.0 5.00 103.101.9 2000 20.0 10.00

Cylinders, Measuring, with spout, Hexagonal Base and break resistant collar, class ‘B’ Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.102.1 5 0.1 0.1 103.102.2 10 0.2 0.2 103.102.3 25 0.5 0.5 103.102.4 50 1.0 1.0 103.102.5 100 1.0 1.0 103.102.6 250 2.0 2.0 103.102.7 500 5.0 5.0 103.102.8 1000 10.0 10.00 103.102.9 2000 20.0 20.00

18 [email protected] I www.pinnaclescientific.com CYLINDER MEASURING

Cylinders, Measuring, with interchangeable stopper, hexagonal Base, Class ‘A’ with work certificate Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.103.1 5 0.1 0.05 103.103.2 10 0.2 0.10 103.103.3 25 0.5 0.25 103.103.4 50 1.0 0.50 103.103.5 100 1.0 0.50 103.103.6 250 2.0 1.00 103.103.7 500 5.0 2.50 103.103.8 1000 10.0 5.00 103.103.9 2000 20.0 10.00

Cylinders, Measuring, AMBER, with interchangeable stopper, hexagonal Base, Class ‘A’ with work certificate Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.104.1 5 0.1 0.05 103.104.2 10 0.2 0.10 103.104.3 25 0.5 0.25 103.104.4 50 1.0 0.50 103.104.5 100 1.0 0.50 103.104.6 250 2.0 1.00 103.104.7 500 5.0 2.50 103.104.8 1000 10.0 5.00 103.104.9 2000 20.0 10.00

Cylinders, Measuring, with interchangeable stopper, hexagonal Base, Class ‘B’ Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.105.1 5 0.1 0.1 103.105.2 10 0.2 0.2 103.105.3 25 0.5 0.5 103.105.4 50 1.0 1.0 103.105.5 100 1.0 1.0 103.105.6 250 2.0 2.0 103.105.7 500 5.0 5.0 103.105.8 1000 10.0 10.0 103.105.9 2000 20.0 20.0

[email protected] I www.pinnaclescientific.com 19 CYLINDER MEASURING Cylinders, Measuring, Graduated with pour out. Accuracy as per class ‘B’ of I.S. 878 : 1975 Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.106.1 5 0.1 0.1 103.106.2 10 0.2 0.2 103.106.3 25 0.5 0.5 103.106.4 50 1.0 1.0 103.106.5 100 1.0 1.0 103.106.6 250 2.0 2.0 103.106.7 500 5.0 5.0 103.106.8 1000 10.0 10.0 103.106.9 2000 20.0 20.0

Cylinders, Measuring, Graduated, with pour out. Accuracy as per class ‘A’ of I.S. 878 : 1975

Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.107.1 5 0.1 0.005 103.107.2 10 0.2 0.10 103.107.3 25 0.5 0.25 103.107.4 50 1.0 0.50 103.107.5 100 1.0 0.50 103.107.6 250 2.0 1.00 103.107.7 500 5.0 2.50 103.107.8 1000 10.0 5.00 103.107.9 2000 20.0 10.0

Cylinders, Measuring, Graduated, AMBER, with pour out. Accuracy as per class ‘A’ of I.S. 878 : 1975

Cat. No. Capacity Sub Div Tolerance ml. ml. ± ml. 103.108.1 5 0.1 0.005 103.108.2 10 0.2 0.10 103.108.3 25 0.5 0.25 103.108.4 50 1.0 0.50 103.108.5 100 1.0 0.50 103.108.6 250 2.0 1.00 103.108.7 500 5.0 2.50 103.108.8 1000 10.0 5.00 103.108.9 2000 20.0 10.0

20 [email protected] I www.pinnaclescientific.com CYLINDER MEASURING

Cylinders, Measuring, Graduated, with interchangeable stopper, Accuracy as per class ‘B’ of I.S. 878 : 1975 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ± ml. 103.109.1 5 0.1 0.1 103.109.2 10 0.2 0.2 103.109.3 25 0.5 0.5 103.109.4 50 1.0 1.0 103.109.5 100 1.0 1.0 103.109.6 250 2.0 2.0 103.109.7 500 5.0 5.0 103.109.8 1000 10.0 10.0 103.109.9 2000 20.0 20.0

Cylinders, Measuring, Graduated, with interchangeable stopper, Accuracy as per class ‘A’ of I.S. 878 : 1975 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ± ml. 103.110.1 5 0.1 0.05 103.110.2 10 0.2 0.10 103.110.3 25 0.5 0.25 103.110.4 50 1.0 0.50 103.110.5 100 1.0 0.50 103.110.6 250 2.0 1.00 103.110.7 500 5.0 2.00 103.110.8 1000 10.0 5.00 103.110.9 2000 20.0 10.0

Cylinders, Measuring, Graduated, AMBER, with interchangeable stopper, Accuracy as per class ‘A’ of I.S. 878 : 1975 Cat. No. Capacity Sub. Div. Tolerance ml. ml. ± ml. 103.111.1 5 0.1 0.05 103.111.2 10 0.2 0.10 103.111.3 25 0.5 0.25 103.111.4 50 1.0 0.50 103.111.5 100 1.0 0.50 103.111.6 250 2.0 1.0 103.111.7 500 5.0 2.0 103.111.8 1000 10.0 5.0 103.111.9 2000 20.0 10.0

[email protected] I www.pinnaclescientific.com 21 CYLINDER MEASURING

Cylinders, Rain measure, Metric Scale Graduated as per IS 4849 : 1968

Cat. No. Size Collector Sub.Div. Tolerance mm. Area cm2 mm. ±ml. 103.112.1 20rain 200 02 0.05 103.112.2 20 rain 100 02 0.10

Conical Measure, Class ‘B’ Cat. No. Capacity ml. 103.113.1 125 103.113.2 250 103.113.3 500

Cylinder, with single graduation mark at 1000 ml. for sedimentation of sand

Cat. No. Description 103.114.1 as above

Cylinders, Nessler, for colour comparison graduated as per I.S. 4116:1967

Cat.No. Capacity Sub. Div. ml. ml. 103.115.1 50 25& 50 103.115.2 100 50&100

Cylinders, Nessler, Class ‘A’

Cat.No. Capacity Sub. Div. ml. ml. 103.116.1 50 25& 50 103.116.2 100 50&100

Crow Receiver, Class ‘B’ Cat. No. Capacity ml. 103.117.1 25 103.117.2 50 103.117.3 100

Crow Receiver, Class ‘A’ Cat. No. Capacity ml. 103.118.1 25 103.118.2 50 103.118.3 100

22 [email protected] I www.pinnaclescientific.com PIPETTES VOLUMETRIC/ MEASURING PIPETTES

Pipettes, Transfer, Volumetric with one mark. Accuracy as per Class ‘B’ I.S. 1117 : 1975 Cat. No. Capacity Tolerance ml. ±ml. 104.100.1 1 0.015 104.100.2 2 0.020 104.100.3 3 0.030 104.100.4 4 0.030 104.100.5 5 0.030 104.100.6 15 0.050 104.100.7 10 0.040 104.100.8 20 0.060 104.100.9 25 0.060 104.100.10 50 0.100 104.100.11 100 1.160

Pipettes, Transfer, Volumetric with one mark. Accuracy as per class ‘A’ I.S. 1117 : 1975 Cat. No. Capacity Tolerance ml. ±ml. 104.101.1 1 0.006 104.101.2 2 0.010 104.101.3 3 0.015 104.101.4 4 0.015 104.101.5 5 0.015 104.101.6 10 0.020 104.101.7 15 0.020 104.101.8 20 0.030 104.101.9 25 0.030 104.101.10 50 0.050 104.101.11 100 0.080

Pipettes, Transfer, Volumetric, AMBER, with one mark. Accuracy as per class ‘A’ I.S. 1117 : 1975. Cat. No. Capacity Tolerance ml. ±ml. 104.102.1 1 0.006 104.102.2 2 0.010 104.102.3 3 0.015 104.102.4 4 0.015 104.102.5 5 0.015 104.102.6 10 0.020 104.102.7 15 0.020 104.102.8 20 0.030 104.102.9 25 0.030 104.102.10 50 0.050 104.102.11 100 0.080

[email protected] I www.pinnaclescientific.com 23 PIPETTES VOLUMETRIC/ MEASURING PIPETTES

Pipettes, Measuring, Graduated, Mohr Type, Accuracy as per class ’B’ of I.S. 4162 : 1967. (These pipettes are graduated for delivery from Zero Mark to the Graduation Mark.) Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 104.103.1 0.1 0.01 0.01 104.103.2 0.2 0.01 0.01 104.103.3 0.5 0.01 0.01 104.103.4 1.0 0.01 0.01 104.103.5 1.0 0.10 0.01 104.103.6 2.0 0.02 0.02 104.103.7 2.0 0.10 0.02 104.103.8 5.0 0.05 0.05 104.103.9 5.0 0.10 0.05 104.103.10 10.0 0.10 0.10 104.103.11 25.0 0.20 0.20

Pipettes, Measuring, Graduated, Mohr Type, Accuracy as per class ’A’ of I.S. 4162 : 1967. (Delivery from zero to Graduation.) Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 104.104.1 0.1 0.01 0.006 104.104.2 0.2 0.01 0.006 104.104.3 0.5 0.01 0.006 104.104.4 1.0 0.01 0.006 104.104.5 1.0 0.10 0.006 104.104.6 2.0 0.02 0.010 104.104.7 2.0 0.10 0.010 104.104.8 5.0 0.05 0.030 104.104.9 5.0 0.10 0.050 104.104.10 10.0 0.10 0.150 104.104.11 25.0 0.20 0.100

Pipettes, Measuring, Graduated, Serological type, Accuracy as per class ’B’ of I.S. 4162 : 1967. (These pipettes are graduated to tip and calibrated to deliver their total capacity when the last drop is blown out.) Cat. No. Capacity Sub.Div. Tolerance ml. ml. ±ml. 104.105.1 0.1 0.01 0.01 104.105.2 0.2 0.01 0.01 104.105.3 0.5 0.01 0.01 104.105.4 1.0 0.01 0.01 104.105.5 1.0 0.10 0.01 104.105.6 2.0 0.02 0.02 104.105.7 2.0 0.10 0.02 104.105.8 5.0 0.05 0.05 104.105.9 5.0 0.10 0.05 104.105.10 10.0 0.10 0.10 104.105.11 25.0 0.20 0.20

24 [email protected] I www.pinnaclescientific.com PIPETTES VOLUMETRIC/ MEASURING PIPETTES

Pipettes, Measuring, Graduated, Serological type, Accuracy as per class ’A’ of I.S. 4162 : 1967. (These pipettes are graduated to tip and calibrated to deliver their total capacity when the last drop is blown out.) Cat. No. Capacity Sub. Div. Tolerance ml. ml. ±ml. 104.106.1 0.1 0.01 0.006 104.106.2 0.2 0.01 0.006 104.106.3 0.5 0.01 0.006 104.106.4 1.0 0.01 0.006 104.106.5 1.0 0.10 0.006 104.106.6 2.0 0.02 0.010 104.106.7 2.0 0.10 0.010 104.106.8 5.0 0.05 0.032 104.106.9 5.0 0.10 0.050 104.106.10 10.0 0.10 0.050 104.106.11 25.0 0.20 0.100

Pipettes, micro liter (Lambda), class ‘B’ Cat. No. Capacity Tolerance Micro liter ±ml. 104.107.1 1 3.0 104.107.2 2 3.0 104.107.3 3 3.0 104.107.4 4 4.0 104.107.5 5 1.0 104.107.6 10 1.0 104.107.7 25 1.0 104.107.8 50 0.6 104.107.9 100 0.6 104.107.10 200 0.4 104.107.11 300 0.4

Pipettes, micro liter (Lambda), class ‘A’ Cat. No. Capacity Tolerance Micro liter ±ml. 104.108.1 1 3.0 104.108.2 2 3.0 104.108.3 3 3.0 104.108.4 4 4.0 104.108.5 5 0.5 104.108.6 10 0.5 104.108.7 25 0.5 104.108.8 50 0.3 104.108.9 100 0.3 104.108.10 200 0.2 104.108.11 300 0.2

[email protected] I www.pinnaclescientific.com 25 PIPETTES VOLUMETRIC/ MEASURING PIPETTES

Pipettes, Automatic with Overflow Cup and double oblique bore stopcock Cat. No. Capacity ml. 104.109.1 1 104.109.2 2 104.109.3 5 104.109.4 10 104.109.5 20 104.109.6 25 104.109.7 50 104.109.8 100

Pipettes, Automatic, Quick acting for rapid work of approximate accuracy (Tilt measure), complete with conical Flask and interchangeable joint B24 Cat. No. Capacity Reservoir Cap ml. ml. 104.110.1 1 100 104.110.2 2 100 104.110.3 5 250 104.110.4 10 250 104.110.5 20 500 104.110.6 25 500

Pipettes, Automatic, Quick acting for rapid work of approximate accuracy (Tilt measure), complete with conical Flask and screw cap fitted replaceable head Cat. No. Capacity Reservoir Cap ml. ml. 104.111.1 5 250 104.111.2 10 250 104.111.3 20 500 104.111.4 25 500

Pipettes, for milk testing,10.75 ml. as per class ‘B’ of I.S. 1223 (Part II) 1972 Cat. No. Description 104.112.1 as above

Pipettes, for milk testing,10.75 ml. as per class ‘B’ of I.S. 1223 (Part II) 1972 class ‘A’ Cat. No. Description 104.113.1 as above

26 [email protected] I www.pinnaclescientific.com PIPETTES VOLUMETRIC/ MEASURING PIPETTES

Pipettes, for milk Test, Bacteriological, Graduated as per I.S. Specification No. 2025 : 1962

Cat. No. Capacity marked at Tolerance ml. ml. ±ml. 104.114.1 1.1 0.5,1& 1.1 0.025 104.114.2 1.2 1.0, 2.0, 2.1 & 2.2 0.040

Pipette, Alcohol, 1ml., one mark Cat. No. Description 104.115.1 as above

Pipette, E.S.R., 200 mm. graduation, 300 mm long. Cat. No. Description 104.116.1 as above

Pipette, Automatic Acid Measure, 1ml. Cat. No. Description 104.117.1 as above

Pipette, Automatic Acid Measure, 10ml. Cat. No. Description 104.118.1 as above

Pipettes, Measuring, with 2 stopcocks Cat. No. Capacity ml. 104.119.1 10 104.119.2 20 104.119.3 25

Pipette, Artificial Insemination, Cattle, Taper Tip.Neutral/Borosilicate Glass, 450 mm. long Cat. No. Description 104.120.1 as above

Pipettes, Pasteur, Disposable, Neutral/Borosilicate Glass

Cat. No. Specification 104.121.1 Length 145 mm 104.121.2 Length 230 mm

[email protected] I www.pinnaclescientific.com 27 PETRI DISH

PETRI DISH

Petri Dishes, Culture, with Serial No. on each piece

Cat No. O.D. mm x HT. mm 105.100.1 50 x 17 105.100.2 80 x 17 105.100.3 100 x 17 105.100.4 150 x 20

Petri Dishes, Culture, top and bottom and serial no., AMBER

Cat No. O.D. mm x HT. mm 105.101.1 50 x 17 105.101.2 80 x 17 105.101.3 100 x 17 105.101.4 150 x 20

28 [email protected] I www.pinnaclescientific.com CONES/ TUBES

CONES Cones, Imhoff, Sediment, Sharp Tip, Graduated from 0 to 1ml. division 1 to 10 ml. in 0.5ml. and 10 to 40 ml. in 1ml. Also marked at 1000 ml. Approx. Total Height 454 mm., Approx Top Dia 100 mm.

Cat. No. Description 106.100.1 as above

Cones, Imhoff, Sediment, Blunt Tip, Graduated from 0 to 1ml. in 0.1ml. division 1 to 10 ml. in 0.5 and 10 to 40 ml. in 1 ml. Also marked at 1000 ml. Approx. Total Height 439 mm., Approx Top Dia 100 mm. Cat. No. Description 106.102.1 as above

TUBES

Tubes Culture Media Round Bottom, with Screw Cap and Teflon/ Rubber Liner. Cat. No. Capacity O. D. Length ml. mm. 107.127.1 5 15x75 107.127.2 10 15x125 107.127.3 15 15x150 107.127.4 25 18x150 107.127.5 30 25x100 107.127.6 45 25x150 107.127.7 60 25x200 107.127.8 100 32x200

Tubes Culture Media Flat Bottom, with Screw Cap and Teflon/ Rubber Liner.

Cat. No. Capacity O. D. Length ml. ml. 107.128.1 5 18x50 107.128.2 5 18x45 107.128.3 15 25x57 107.128.4 30 25x95 107.128.5 40 25x145

[email protected] I www.pinnaclescientific.com 29 TUBES

Tubes, Leighton, for culture work, plain top with cover slip Cat. No. Length O.D. Window Size mm. mm. mm. 107.100.1 125 16 11x37 107.100.2 150 16 11x37

Tubes, Leighton, or culture work, with screw Cap and cover slip Cat. No. Length O.D. Window Size mm. mm. mm. 107.101.1 125 16 11x37 107.101.2 150 16 11x37

Tubes, Centrifuge, Conical bottom, graduated

Cat. No. Capacity Ht.xO.D ml. ml. 107.102.1 5 100x13 107.102.2 10 110x15 107.102.3 15 120x17 107.102.4 25 125x22 107.102.5 50 125x28 107.102.6 100 177x36

Tubes, Centrifuge, Conical bottom, plain

Cat. No. Capacity Ht.xO.D ml. ml. 107.103.1 3 76x10 107.103.2 5 100x13 107.103.3 10 110x15 107.103.4 12 110x16 107.103.5 15 120x17 107.103.6 25 125x22 107.103.7 50 125x28 107.103.8 100 177x36

30 [email protected] I www.pinnaclescientific.com TUBES

Tubes, Centrifuge, with Screw Cap, Plain

Cat.No. Capacity Ht.xO.D ml. ml. 107.104.1 10 110x15 107.104.2 15 120x17

Tubes, Centrifuge, with Screw Cap, Graduated Cat.No. Capacity Ht.xO.D ml. ml. 107.105.1 10 110x15 107.105.2 15 120x17

Tubes, Centrifuge, Conical Bottom, Graduated, with Inter changeable stopper Cat. No. Capacity ml. 107.106.1 5 107.106.2 10 107.106.3 15 107.106.4 25 107.106.5 50 107.106.6 100

Tubes, Centrifuge, Plain with Interchangeable stopper, conical or round bottom

Cat. No. Capacity Size approx ml. 107.107.1 3 76x10 107.107.2 5 100x13 107.107.3 12 110x16 107.107.4 15 120x17 107.107.5 25 125x22

[email protected] I www.pinnaclescientific.com 31 TUBES

Tubes, Centrifuge, Round bottom, Graduated

Cat. No. Capacity Size approx ml. Ht. x O.D. mm. 107.108.1 12 16x110 107.108.2 30 24x110 107.108.3 40 28x110 107.108.4 50 30x110 107.108.5 100 45x110 107.108.6 200 55x116

Tubes, Centrifuge, short, Conical Bottom, Pour out, heavy duty, Plain, 40 ml. Approx. O.D. X L, 29x116 mm

Cat. No. Description 107.109.1 as above

Tube, Centrifuge, graduated to 10 ml in 0.5 ml and from 10 ml to 40 ml. in 1 ml. div.

Cat. No. Description 107.110.1 as above

Tube, Centrifuge, Oil, fully graduated 0 to 0.5 ml. in 0.05 ml. div., 0.5 to 2ml. in 0.1 div., 2 ml. to 3ml.in 0.2 div., 3ml. to 5ml. in 0.5 ml. div., 5 ml. to 10 ml. in 1 ml. div., 10 ml. to 25 ml. in 5 ml. div., graduations are marked at 50, 75 and 100 ml. Cat. No. Description 107.111.1 as above

Tube, Centrifuge, Oil, the lower stem is graduated 0 to 1.5 ml. in 0.1 ml. div., the body is graduated 1.5 ml. to 5 ml. in 0.5 ml. div. from 5 ml. to 10 ml. in 1 ml. div., graduations also marked at 15, 20, 25, 50 and 100 ml.

Cat. No. Description 107.112.1 as above

Tube, Stokes, 50 ml. graduated, with stopper

Cat. No. Description 107.113.1 as above

Test Tubes, Graduated with interchangeable stopper Cat. No. Size Capacity Sub. Div Stopper mm. Ht. x O.D. ml. ml. 107.114.1 100x12 5 0.1 B 10 107.114.2 125x16 10 0.1 B 12 107.114.3 150x22 25 0.5 B 19 107.114.4 200x25 50 1.0 B 19 107.114.5 200x32 100 2.0 B 24

32 [email protected] I www.pinnaclescientific.com TUBES

Test Tubes, with interchangeable stopper Cat. No. Length x Dia.mm. Stopper size 107.115.1 100x12 B 10 107.115.2 125x15 B 12 107.115.3 150x18 B 14 107.115.4 150x25 B 19 107.115.5 200x25 B 19 107.115.6 200x32 B 24 107.115.7 200x38 B 24

Test Tubes, Round or flat bottom, with rim or without rim, Plain, made from imported borosilicate 33 exp. glass tubing Cat. No. Capacity O.D. XLXW.T. ml. mm. 107.116.1 3 10x75x1.0 107.116.2 5 12x75x1.0 107.116.3 8 12x100x1.0 107.116.4 10 15x125x1.2 107.116.5 15 15x150x1 107.116.6 25 18x150x1.2 107.116.7 50 25x150x1.2 107.116.8 75 25x200x1.2

Test Tubes, Round or flat bottom, with rim or without rim, Graduated, made from imported borosilicate 33exp. glass tubing. Cat. No. Capacity O.D. X L X W.T. ml. mm. 107.117.1 3 10x75x1.0 107.117.2 5 12x75x1.0 107.117.3 8 12x100x1.0 107.117.4 10 15x125x1.2 107.117.5 15 15x150x1 107.117.6 25 18x150x1.2 107.117.7 50 25x150x1.2 107.117.8 75 25x200x1.2 Note: Please clearly mention you exact requirement while placing order.

[email protected] I www.pinnaclescientific.com 33 TUBES

Test Tubes, Neutral, Hard Glass, Heat resistant, Auto cleavable, with rim or without rim Cat. No. Size W.T. Approx. mm. Approx. mm. 107.118.1 10x75 1.0 107.118.2 12x75 1.0 107.118.3 12x100 1.0 107.118.4 15x100 1.0 107.118.5 15x125 1.0 107.118.6 15x150 1.0 107.118.7 18x150 1.0 107.118.8 25x150 1.0 107.118.9 25x150 1.25

(Culture tube)

Test Tube with Socket, without stopper

Cat. No. Socket O.D. Overall Capacity mm. Length mm. ml. 107.119.1 B10 14 100 5 107.119.2 B12 16 100 10 107.119.3 B14 18 100 14 107.119.4 B14 18 125 16 107.119.5 B14 18 150 19 107.119.6 B19 22 100 19 107.119.7 B19 22 150 31 107.119.8 B24 28 150 31 107.119.9 B24 28 200 75 107.119.10 B34 40 250 195

Test Tube, Pressure, Penicillin type 20 mm. neck, 18x150mm.

Cat. No. Description 107.120.1 as above

Stoppers for above pressure Test tube (Suba Seals)

Cat. No. Description 107.121.1 as above

34 [email protected] I www.pinnaclescientific.com TUBES

Blood Sugar Tubes as per I.S. 3740 : 1966

Cat. Dia Dia x Dia Grad. mm. mm. at ml. 107.122.1 25 20 x 215 1.25 & 25 107.122.2 25 20 x 215 4, 12.5 & 25

Tubes, Calcium Chloride, Straight with one Bulb

Cat. No. Length x Dia. mm. 107.123.1 100 x 14 107.123.2 125 x 16 107.123.3 150 x 18

Tubes, Calcium Chloride, U- Form with side tube and interchangeable stopper

Cat. No. Length x Dia. mm. 107.124.1 100 x 14 107.124.2 124 x 16 107.124.3 150 x 18

Calcium Chloride Towers with interchangeable stopper

Cat. No. Length x Dia. mm. Joints 107.125.1 250 x 40 B34 107.125.2 300 x 40 B34 107.125.3 300 x 60 B34

Tubes Melting point Cat. No. Length x Dia. mm. 107.126.1 150 x 18 107.126.2 150 x 25

[email protected] I www.pinnaclescientific.com 35 VISCOMETER

VISCOMETER

Viscometer, College Pattern, Ostwald’s

Cat. No. Secs. 108.100.1 80 - 100

Viscometers, U-Tube, BS/U

Cat No. Size Visco Range 108.101.1 A 1 - 5 108.101.2 B 2 - 15 108.101.3 C 6 - 45 108.101.4 D 20 - 120 108.101.5 E 60 - 500 108.101.6 F 200 - 1000 108.101.7 G 600 - 4000 108.101.8 H 200 - 15000

Viscometers, (Suspended Level) BS/IP/SL with Center Support

Cat No. Size Visco Range 108.102.1 1 2 108.102.2 1A 6 108.102.3 2 20 108.102.4 2A 60 108.102.5 3 200 108.102.6 3A 600 108.102.7 4 2000 108.102.8 4A 6000 108.102.9 5 20000

Viscometers, (Suspended Level) Shortened from BS/IP/SL(S) with Center Support

Cat No. Size Visco Range 108.103.1 3 2 108.103.2 4 6 108.103.3 5 20 108.103.4 6 60 108.103.5 7 200 108.103.6 8 600 108.103.7 9 2000

36 [email protected] I www.pinnaclescientific.com VISCOMETER

Viscometers, Cannon Fenske, for Transparent Liquids BS/IP/CF with Center Support

Cat No. Size Visco Range 108.104.1 100 3 - 12 108.104.2 150 7 - 28 108.104.3 200 20 - 80 108.104.4 300 50 - 200 108.104.5 350 100 - 400 108.104.6 400 240 - 960 108.104.7 450 500 - 2000 108.104.8 500 1600 - 6400 108.104.9 600 4000 - 16000

Viscometers, Cannon Fenske, for Opaque Liquids ASTM-D 445, with Center Support

Cat No. Size Visco Range 108.105.1 100 3 - 12 108.105.2 150 7 - 28 108.105.3 200 20 - 80 108.105.4 300 50 - 200 108.105.5 350 100 - 400 108.105.6 400 240 - 960 108.105.7 450 500 - 2000 108.105.8 500 1600 - 6400 108.105.9 600 4000 - 16000

Viscometers, U- Tube, Reverse Flow, BS/IP/RF with Center Support

Cat No. Size Visco Range 108.106.1 2 2 108.106.2 3 6 108.106.3 4 20 108.106.4 5 60 108.106.5 6 200 108.106.6 7 600 108.106.7 8 2000 108.106.8 9 6000 108.106.9 10 20000 108.106.10 11 60000

Viscometers, Falling Sphere

Cat No. Bore of Tube mm 108.107.1 25 108.107.2 40

[email protected] I www.pinnaclescientific.com 37 CONDENSER

CONDENSERS Condensers, Air Cat. No. Socket Cone Effective Length mm. 109.100.1 B14 B14 200 109.100.2 B19 B19 200 109.100.3 B24 B24 250 109.100.4 B19 B19 400 109.100.5 B24 B24 500 109.100.6 B34 B34 500 109.100.7 B19 B19 600 109.100.8 B24 B24 750 109.100.9 — B19 750 109.100.10 — B24 750 109.100.11 — B19 1000 109.100.12 — B 24 1000

Condenser, Air, Plain

Cat. No. Length mm Tube Dia mm. 109.101.1 300 13 109.101.2 450 13 109.101.3 600 13

Condensers, Air

Cat. No. Socket Cone Length mm 109.102.1 B10 B10 100 109.102.2 B14 B14 200 109.102.3 B19 B19 300 109.102.4 B19 B19 400 109.102.5 B19 B19 500 109.102.6 B19 B19 600 109.102.7 B24 B24 400 109.102.8 B24 B24 600

38 [email protected] I www.pinnaclescientific.com CONDENSER

Condensers, Liebig

Cat. No. Socket Cone Effective Length mm. 109.103.1 B14 B14 150 109.103.2 B19 B19 200 109.103.3 B24 B24 200 109.103.4 B19 B19 300 109.103.5 B24 B24 300 109.103.6 B19 B19 350 109.103.7 B24 B24 350 109.103.8 B19 B19 400 109.103.9 B24 B24 400 109.103.10 B24 B24 500 109.103.11 B24 B24 600 109.103.12 B24 B 24 750 109.103.13 B34 B34 500 109.103.14 B34 B34 600 109.103.15 B34 B34 750 109.103.16 B34 B34 900 109.103.17 — B34 300 109.103.18 — B34 350 109.103.19 — B34 250

Condensers, Coil, Graham, Distillate Type

Cat. No. Socket Cone Effective Length mm. 109.104.1 B14 B14 150 109.104.2 B19 B19 200 109.104.3 B19 B19 250 109.104.4 B24 B24 250 109.104.5 B19 B19 300 109.104.6 B24 B24 300 109.104.7 B24 B24 400 109.104.8 B24 B24 500 109.104.9 B34 B34 500 109.104.10 B34 B34 600

Condensers, Coil, Graham, Jacket Distillate Type

Cat. No. Socket Cone Effective Length mm. 109.105.1 B14 B14 150 109.105.2 B19 B19 200 109.105.3 B19 B19 250 109.105.4 B24 B24 250 109.105.5 B19 B19 300 109.105.6 B24 B24 300 109.105.7 B24 B24 400 109.105.8 B24 B24 500 109.105.9 B34 B34 500 109.105.10 B34 B34 600 [email protected] I www.pinnaclescientific.com 39 CONDENSER

Condensers, Reversible Type

Cat. No. Socket Cone Effective Length mm. 109.106.1 — B19&B24 150 109.106.2 — B24&B24 150 109.106.3 — B24&B34 150

Condensers, Double Coil, with common inlet

Cat. No. Socket Cone Effective Length mm. 109.107.1 B19 B19 200 109.107.2 B24 B24 200 109.107.3 B34 B34 350 109.107.4 B34 B34 450 109.107.5 B34 B34 600

Condensers, Davies, (Double Surface)

Cat. No. Socket Cone Effective Length mm. 109.108.1 B19 B19 150 109.108.2 B24 B24 150 109.108.3 B19 B19 200 109.108.4 B24 B24 200 109.108.5 B29 B29 200 109.108.6 — B19 200 109.108.7 — B24 200 109.108.8 — B34 200 109.108.9 — B19 250 109.108.10 B19 B19 250 109.108.11 B24 B24 250 109.108.12 B19 B19 300 109.108.13 B24 B24 300 109.108.14 B24 B24 400 109.108.15 B24 B24 500 109.108.16 B34 B34 500 109.108.17 B34 B34 600

40 [email protected] I www.pinnaclescientific.com CONDENSER

Condensers, Jacketed Coil

Cat. No. Socket Cone Effective Length mm. 109.109.1 B19 B19 150 109.109.2 B24 B24 150 109.109.3 — B34 150 109.109.4 — B40 150 109.109.5 B19 B19 200 109.109.6 B24 B24 200 109.109.7 B19 B19 300 109.109.8 B24 B24 300 109.109.9 B24 B24 400 109.109.10 B34 B34 400 109.109.11 B34 B34 500

Condensers, Inland Revenue, Thorpe

Cat. No. Socket Cone Effective Length mm. 109.110.1 B19 B19 200 109.110.2 B24 B24 200

Condensers, Allihn, (Bulb Condenser)

Cat. No. Socket Cone Effective Length mm. 109.111.1 - B19 200 109.111.2 - B24 200 109.111.3 - B29 200 109.111.4 - B34 200 109.111.5 - B40 200 109.111.6 - B50 200 109.111.7 - B50 250 109.111.8 B19 B19 200 109.111.9 B24 B24 200 109.111.10 B19 B19 300 109.111.11 B24 B24 300 109.111.12 B24 B24 400 109.111.13 B24 B24 500 109.111.14 B34 B34 500 109.111.15 B34 B34 600 109.111.16 B34 B34 750

Condensers, Friedrich

Cat. No. Socket Cone Effective Length mm. 109.112.1 B19 B19 100 109.112.2 B19orB24 B19orB24 200 109.112.3 B19orB24 B19orB24 250 [email protected] I www.pinnaclescientific.com 41 CONDENSER WITH/WITHOUT JOINTS

Condensers, Ether

Cat. No. Socket Cone Effective Length mm. 109.113.1 B19 B24 150 109.113.2 B19orB24 B24 200 109.113.3 B19orB24 B24 250

Condenser, Cold Finger, 130 mm. immersion, Cone B19 Cat. No. Description 109.114.1 as above

Condensers, Leibig, tube dia 30mm. Cat. No. Effective Length mm. 110.100.1 200 110.100.2 300 110.100.3 400 110.100.4 500 110.100.5 600

Condensers, Allihn, (Bulb Condenser) tube dia 30mm. Cat. No. Effective Length mm. 110.101.1 200 110.101.2 300 110.101.3 400 110.101.4 500 110.101.5 600

42 [email protected] I www.pinnaclescientific.com CONDENSER WITHOUT JOINT

Condensers, Coil, (Graham Condenser) tube dia 30mm. Cat. No. Effective Length mm. 110.102.1 200 110.102.2 300 110.102.3 400 110.102.4 500 110.102.5 600

Condensers, Air Cat. No. Effective Length mm. 110.103.1 400 110.103.2 600 110.103.3 750 110.103.4 1000

Condenser, Bulb Shape, Suitable for 1000ml. spout less, Tall form, Beaker Cat. No. Description 110.104.1 as above

[email protected] I www.pinnaclescientific.com 43 FLASKS

Flasks, Volumetric, (Measuring) with plastic stopper, Accuracy as per class ‘B’ of I.S.915 : 1975 Cat. No. Capacity Tolerance Stopper ml. ± ml. Size 111.100.1 1 0.02 10/15 111.100.2 2 0.03 10/15 111.100.3 5 0.05 10/15 111.100.4 10 0.05 10/15 111.100.5 25 0.08 10/15 111.100.6 50 0.12 10/15 111.100.7 100 0.20 14/15 111.100.8 200 0.30 14/15 111.100.9 250 0.30 14/15 111.100.10 500 0.50 19/20 111.100.11 1000 0.80 19/20 111.100.12 2000 1.20 24/25 111.100.13 4000 3.0 29/32 111.100.14 5000 5.0 34/35 1 ml and 2ml. Volumetric Flask are of Test Tube shape.

Flasks, Volumetric, (Measuring), AMBER, plastic stopper, Accuracy as per class ‘B’ of I.S.915 : 1975 Cat. No. Capacity Tolerance Stopper ml. ± ml. Size 111.101.1 1 0.02 10/15 111.101.2 2 0.03 10/15 111.101.3 5 0.05 10/15 111.101.4 10 0.05 10/15 111.101.5 25 0.08 10/15 111.101.6 50 0.12 10/15 111.101.7 100 0.20 14/15 111.101.8 200 0.30 14/15 111.101.9 250 0.30 14/15 111.101.10 500 0.50 19/20 111.101.11 1000 0.80 19/20 111.101.12 2000 1.20 24/25 1 and 2ml. Volumetric Flasks are of Test Tube shape.

44 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Volumetric, (Measuring), with plastic stopper, Accuracy as per class ‘A’ of I.S. 915: 1975 Cat. No. Capacity Tolerance Stopper ml. ± ml. Size 111.102.1 1 0.010 10/15 111.102.2 2 0.015 10/15 111.102.3 5 0.025 10/15 111.102.4 10 0.025 10/15 111.102.5 25 0.040 10/15 111.102.6 50 0.060 10/15 111.102.7 100 0.100 14/15 111.102.8 200 0.150 14/15 111.102.9 250 0.150 14/15 111.102.10 500 0.250 19/20 111.102.11 1000 0.400 19/20 111.102.12 2000 0.600 24/25 111.102.13 4000 1.5 29/32 111.102.14 5000 2.5 34/35 1 ml and 2ml. Volumetric Flasks are of Test Tube shape.

Flasks, Volumetric, (Measuring), AMBER, with plastic stopper, Accuracy as per class ‘A’ of I.S. 915: 1975 Cat. No. Capacity Tolerance Stopper ml. ± ml. Size 111.103.1 1 0.010 10/15 111.103.2 2 0.015 10/15 111.103.3 5 0.025 10/15 111.103.4 10 0.025 10/15 111.103.5 25 0.040 10/15 111.103.6 50 0.060 10/15 111.103.7 100 0.100 14/15 111.103.8 200 0.150 14/15 111.103.9 250 0.150 14/15 111.103.10 500 0.250 19/20 111.103.11 1000 0.400 19/20 111.103.12 2000 0.600 24/25 1 ml and 2ml. Volumetric Flask are of Test Tube shape.

[email protected] I www.pinnaclescientific.com 45 FLASKS

Flasks, volumetric, (Measuring), with Screw cap Accuracy as per class ‘B’ of I.S. 915 :1975 Cat. No. Capacity Tolerance Cap. ml. ± ml. 111.104.1 1 0.02 13 111.104.2 2 0.03 13 111.104.3 5 0.05 13 111.104.4 10 0.05 13 111.104.5 25 0.08 18 111.104.6 50 0.12 18 111.104.7 100 0.20 18 111.104.8 200 0.30 18 111.104.9 250 0.30 18 111.104.10 500 0.50 24 111.104.11 1000 0.80 24 111.104.12 2000 1.20 28 111.104.13 4000 3.0 - 111.104.14 5000 5.0 - 1 ml and 2ml. Volumetric Flasks are of Test Tube shape.

Flasks, volumetric, (Measuring) with Screw cap Accuracy as per class ‘A’ of I.S. 915 :1975 Cat. No. Capacity Tolerance ml ±ml 111.105.1 1 0.010 111.105.2 2 0.015 111.105.3 5 0.025 111.105.4 10 0.025 111.105.5 25 0.040 111.105.6 50 0.060 111.105.7 100 0.100 111.105.8 200 0.150 111.105.9 250 0.150 111.105.10 500 0.250 111.105.11 1000 0.400 111.105.12 2000 0.600 111.105.13 4000 1.500 111.105.14 5000 2.500

Flasks, Volumetric, Sugar estimation with two marks, without stopper. Accuracy as per class ‘B’ Cat. No. Capacity 111.106.1 Lines marked 50ml. and 55ml. 111.106.2 —do — 100ml. and 110ml. 111.106.3 — do — 200ml. and 220ml.

46 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Volumetric, Sugar estimation with two marks, without stopper, Accuracy as per class ‘A’ Cat. No. Capacity 111.107.1 Lines marked 50ml. and 55ml. 111.107.2 —do — 100ml. and 110ml. 111.107.3 — do — 200ml. and 220ml.

Flasks, Kohlraush, (Mud Flask), with cup on top

Cat. No. Capacity Tolerance ml. ±ml 111.108.1 50 0.04 111.108.2 60 0.10 111.108.3 100 0.10 111.108.4 200 0.20

Flasks, Kohlraush, (Mud Flask), Class ‘A’ with cup on top

Cat. No. Capacity Tolerance ml. ±ml 111.109.1 50 0.04 111.109.2 60 0.10 111.109.3 100 0.10 111.109.4 200 0.20

Flasks, Saybolt, Viscosity, Capacity 60ml. height 85mm. Cat. No. Description 111.110.1 as above

[email protected] I www.pinnaclescientific.com 47 FLASKS

Flasks, Cassia, with graduated long neck Cat. No. Capacity ml. 111.111.1 100 111.111.2 200

Flask, Lechatelier, for Sp. Gr. Test, Bulb Capacity approx. 250ml. neck graduation from 0 to 1ml. and 18 to 24ml. in 0.1ml. class ‘B’

Cat. No. Description

111.112.1 as above

Flask, Lechatelier, for Sp. Gr. Test, Bulb Capacity approx. 250ml. neck graduation from 0 to 1ml. and 18 to 24ml. in 0.1ml. class ‘A’

Cat. No. Description

111.113.1 as above

Flasks, Saponification/ Sulphonation, with neck graduated and figured 0 to100% for determination of olefin plus aromatic content Cat. No. Bulb Neck Sub. Div. Tol. Cap. Cap. ml. +ml. 111.114.1 45 ml. 5 0.1 0.08 111.114.2 150 ml. 10 0.1 0.20 111.114.3 200 ml. 25 0.2 0.20

Arm Flask, long neck, 300 ml. Cat. No. Description

111.115.1 as above

48 [email protected] I www.pinnaclescientific.com FLASKS

Flasks Reaction, wide mouth, flat flange 100mm .I.D., 150 mm. O. D.

Cat. No. Capacity ml. 111.116.1 1000 111.116.2 2000 111.116.3 3000 111.116.4 5000 111.116.5 10000 111.116.6 20000

Lids for Reaction Flasks, Flat flange 100 mm. I.D., 150 mm. O.D., with multiple Sockets Cat. No. Central Parallel Side Side Side 50 100 150 111.117.1 B19 B19 B24 B19 — 111.117.2 B19 B14 B14 B14 B29 111.117.3 B29 B14 B14 B14 B29

Stainless Steel Clips, with wing nuts for holding 100 mm. flat flanges. Cat. No. Description 111.118.1 as above

Teflon Gaskets, for 100 mm. flat flange Cat. No. Description 111.119.1 as above

[email protected] I www.pinnaclescientific.com 49 FLASKS

Flasks, Flat or Round Bottom, Short or medium neck with socket

Cat. No. Capacity Socket ml.

111.120.1 5 B10 or B14 111.120.2 10 B10 or B14 111.120.3 25 B14or B19 111.120.4 25 B 24 111.120.5 50 B14 orB19 111.120.6 50 B24 111.120.7 50 B34 111.120.8 100 B14orB19 111.120.9 100 B24 111.120.10 100 B34 111.120.11 150 B19 111.120.12 150 B24 111.120.13 150 B29orB34 111.120.14 250 B19 111.120.15 250 B24 111.120.16 250 B29orB34 111.120.17 500 B19 111.120.18 500 B24 111.120.19 500 B29orB34 111.120.20 1000 B24 2 111.120.21 1000 B29 111.120.22 1000 B34 111.120.23 2000 B24 111.120.24 2000 B34 111.120.25 3000 B24 111.120.26 3000 B34 111.120.27 5000 B24orB34orB40 111.120.28 5000 B45orB50 111.120.29 10000 B34orB40 111.120.30 10000 B45orB50orB55 111.120.31 20000 B40orB50orB55

Note : For long flasks, 10% will be charged extra and also do mention the Flat or Round Bottom, Short or Medium Neck and the size of the Socket, while placing order.

50 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Flat or Round Bottom, Two neck at angular or parallel

Cat. No. Center Side Capacity Neck Neck ml. 111.121.1 B24 B14 100 111.121.2 B24 B14 250 111.121.3 B24 B19 250 111.121.4 B24 B14 500 111.121.5 B24 B19 500 111.121.6 B24 B19 1000 111.121.7 B34 B19 1000 111.121.8 B24 B14 1000 111.121.9 B34 B19 2000 111.121.10 B34 B24 3000 111.121.11 B34 B19 3000 111.121.12 B34 B14 3000 111.121.13 B24 B24 3000 111.121.14 B24 B19 3000 111.121.15 B24 B14 3000 111.121.16 B40 B24 5000 111.121.17 B40 B19 5000 111.121.18 B40 B14 5000 111.121.19 B34 B24 5000 111.121.20 B34 B19 5000 111.121.21 B34 B14 5000 111.121.22 B24 B24 5000 111.121.23 B24 B19 5000 111.121.24 B24 B14 5000 111.121.25 B55 B34 10000 111.121.26 B55 B24 10000 111.121.27 B55 B19 10000 111.121.28 B50 B34 10000 111.121.29 B55 B24 10000 111.121.30 B55 B19 10000 111.121.31 B40 B34 10000 111.121.32 B40 B24 10000 111.121.33 B40 B19 10000 111.121.34 B55 B34 20000 111.121.35 B55 B24 20000 111.121.36 B55 B19 20000 111.121.37 B50 B34 20000 111.121.38 B50 B24 20000 111.121.39 B50 B19 20000 111.121.40 B40 B34 20000 111.121.41 B40 B24 20000 111.121.42 B40 B19 20000

Note: Please do mention for parallel or angular necks and the size of sockets required, while placing order.

[email protected] I www.pinnaclescientific.com 51 FLASKS

Flasks, Flat or Round Bottom, Three neck, side neck, angular or Parallel

Cat. No. Center Side Capacity Neck Neck ml. 111.122.1 B24 B14 100 111.122.2 B24 B14 250 111.122.3 B24 B19 250 111.122.4 B24 B14 500 111.122.5 B24 B19 500 111.122.6 B24 B14 1000 111.122.7 B24 B19 1000 111.122.8 B34 B19 1000 111.122.9 B24 B19 2000 111.122.10 B34 B19 2000 111.122.11 B34 B24 2000 111.122.12 B34 B19 3000 111.122.13 B34 B24 3000 111.122.14 B34 B19 5000 111.122.15 B40 B19 5000 111.122.16 B50 B19 5000 111.122.17 B55 B19 5000 111.122.18 B34 B24 5000 111.122.19 B40 B24 5000 111.122.20 B50 B24 5000 111.122.21 B55 B24 5000 111.122.22 B34 B19 10000 111.122.23 B40 B19 10000 111.122.24 B50 B19 10000 111.122.25 B55 B19 10000 111.122.26 B34 B24 10000 111.122.27 B40 B24 10000 111.122.28 B50 B24 10000 111.122.29 B55 B24 10000 111.122.30 B34 B19 20000 111.122.31 B40 B19 20000 111.122.32 B50 B19 20000 111.122.33 B55 B19 20000 111.122.34 B34 B19 20000 111.122.35 B34 B24 20000 111.122.36 B40 B24 20000 111.122.37 B50 B24 20000 111.122.38 B55 B24 20000 111.122.39 B34 B24 20000 Note: Please do mention for parallel or angular, necks sizes of the sockets required, while placing order. Four Neck flasks above 1000 ml can be supplied on 20% extra cost.

52 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Conical, Erlenmeyer, socketed

Cat. No. Socket Capacity ml. 111.123.1 B14 5 111.123.2 B14 10 111.123.3 B14 25 111.123.4 B14 50 111.123.5 B19 50 111.123.6 B19 100 111.123.7 B24 100 111.123.8 B19 150 111.123.9 B24 150 111.123.10 B19 250 111.123.11 B24 250 111.123.12 B29 250 111.123.13 B34 250 111.123.14 B19 500 111.123.15 B24 500 111.123.16 B29 500 111.123.17 B34 500 111.123.18 B24 1000 111.123.19 B29 1000 111.123.20 B34 1000 111.123.21 B24 2000 111.123.22 B34 2000

Flasks, Buchner, Filtration

Cat. No. Socket Capacity ml. 111.124.1 B19 100 111.124.2 B24 250 111.124.3 B24 500 111.124.4 B24 1000 111.124.5 B34 1000

Flasks, Kjeldahl

Cat. No. Socket Capacity ml. 111.125.1 B19 50 111.125.2 B19 100 111.125.3 B24 100 111.125.4 B24 300 111.125.5 B24 500 111.125.6 B24 800 111.125.7 B29 800

[email protected] I www.pinnaclescientific.com 53 FLASKS

Flasks, Kjeldahl, Long neck Cat. No. Capacity ml. 111.126.1 10 111.126.2 30 111.126.3 50 111.126.4 100 111.126.5 300 111.126.6 500 111.126.7 800

Flasks, Evaporating

Cat. No. Socket Capacity ml. 111.127.1 B29 100 111.127.2 B29 250 111.127.3 B29 500 111.127.4 B29 1000

Flasks, Florentine

Cat. No. Socket Capacity ml. 111.128.1 B29 100 111.128.2 B29 250 111.128.3 B29 500 111.128.4 B29 1000 111.128.5 B29 2000

Flasks, Pear Shaped, Single neck

Cat. No. Socket Capacity ml. 111.129.1 B14 5 111.129.2 B10 5 111.129.3 B10 10 111.129.4 B14 10 111.129.5 B10 25 111.129.6 B14 25 111.129.7 B14 50 111.129.8 B19 50 111.129.9 B14 100 111.129.10 B19 100 111.129.11 B24 100

54 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Pear Shaped, two necks, side neck at angle

Cat. No. Center Side Capacity Neck Neck ml. 111.130.1 B14 B14 25 111.130.2 B14 B14 50 111.130.3 B14 B14 100

Flasks, Pear Shaped, Three necks, one side neck at angle, one side neck parallel

Cat. No. Centre Side Capacity Neck Neck ml. 111.131.1 B14 B14 25 111.131.2 B14 B14 50 111.131.3 B14 B14 100

Flasks, Vigreaux, Claisen Type

Cat. No. Center Side Capacity Neck Neck ml. 111.132.1 B14 B14 10 111.132.2 B14 B14 25 111.132.3 B14 B14 50 111.132.4 B14 B14 100

Flasks, Vigreaux, with side neck

Cat. No. Center Side Capacity Neck Neck ml. 111.133.1 B14 B14 10 111.133.2 B14 B14 25 111.133.3 B14 B14 50 111.133.4 B14 B14 100

[email protected] I www.pinnaclescientific.com 55 FLASKS

Flasks, Claisen, Pear Shaped

Cat. No. Center Side Capacity Neck Neck ml. 111.134.1 B14 B14 10 111.134.2 B14 B14 25 111.134.3 B14 B14 50 111.134.4 B14 B14 100

Flasks, Distillation, Pear Shaped

Cat. No. Socket Cone Capacity ml. 111.135.1 B14 B14 10 111.135.2 B14 B14 25 111.135.3 B14 B14 50 111.135.4 B14 B14 100

Flasks, Distillation, with side tube Cat. No. Capacity ml. 111.136.1 10 111.136.2 25 111.136.3 50 111.136.4 100 111.136.5 250 111.136.6 500 111.136.7 1000 111.136.8 2000

Flasks, Buckner, Filtration, Heavy, Bolt Neck

Cat. No. Capacity ml. 111.137.1 100 111.137.2 250 111.137.3 500 111.137.4 1000 111.137.5 2000 Note : The above flasks not suitable for High Vacuum.

56 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Conical, with Teflon Rubber liner screw Cap Cat. No. Capacity ml. 111.138.1 25 111.138.2 50 111.138.3 100 111.138.4 150 111.138.5 250 111.138.6 500 111.138.7 1000 111.138.8 2000

Flasks, Conical, with interchangeable stopper Cat. No. Capacity Joint ml. 111.139.1 10 B10 111.139.2 25 B14 111.139.3 50 B19 111.139.4 100 B24 111.139.5 150 B24 111.139.6 250 B24 111.139.7 500 B24 111.139.8 1000 B29 111.139.9 2000 B29

Flasks, Iodine, flaring, funnel Shaped Cup B24 Cat. No. Capacity ml. 111.140.1 50 111.140.2 100 111.140.3 250 111.140.4 500 111.140.5 1000

[email protected] I www.pinnaclescientific.com 57 FLASKS

Flasks, Erlenmeyer’s, Conical, Graduated, Narrow Mouth Cat. No Capacity Graduation ml. Interval mm. 111.141.1 5 - 111.141.2 10 - 111.141.3 20/25 - 111.141.4 50 - 111.141.5 100 25 111.141.6 150 25 111.141.7 250 50 111.141.8 500 100 111.141.9 1000 200 111.141.10 2000 500 111.141.11 3000 - 111.141.12 4000 - 111.141.13 5000 -

Flask, Erlenmeyer, conical, long neck, without rim, cap 250ml. O.D. X Ht 78x154mm Neck 25mm. Cat. No Description 111.142.1 as above

Flask, conical rimless, cap.750 ml, O.D. x Ht. 114x210 mm., neck O.D. 34 mm. Cat. No Description 111.143.1 as above

58 [email protected] I www.pinnaclescientific.com FLASKS

Flasks, Erlenmeyer, conical wide mouth Cat. No. Capacity O.D. x Ht. Neck ml. mm. mm. 111.144.1 100 70x110 34 111.144.2 250 74x134 50 111.144.3 500 97x170 50 111.144.4 1000 120x220 56 111.144.5 2000 70

Flasks, Boiling, Flat or Round Bottom Cat. No. Capacity ml. 111.145.1 5 111.145.2 10 111.145.3 25 111.145.4 50 111.145.5 100 111.145.6 150 111.145.7 250 111.145.8 500 111.145.9 1000 111.145.10 2000 111.145.11 3000 111.145.12 5000 111.145.13 10000

[email protected] I www.pinnaclescientific.com 59 STANDARD JOINTS, STOPPERS, ADAPTERS

STANDARD JOINTS, STOPPERS, ADAPTERS

Sockets, Plain Shank, Single, 110mm long Cat. No Socket 112.100.1 B7 112.100.2 B10 112.100.3 B12 112.100.4 B14 112.100.5 B19 112.100.6 B24 112.100.7 B29 112.100.8 B34 112.100.9 B40 112.100.10 B45 112.100.11 B50 112.100.12 B55 Note : Socket with Hooks, 20% extra.

Cones, Plain End, Single, 110mm long Cat. No Cone 112.101.1 B7 112.101.2 B10 112.101.3 B12 112.101.4 B14 112.101.5 B19 112.101.6 B24 112.101.7 B29 112.101.8 B34 112.101.9 B40 112.101.10 B45 112.101.11 B50 112.101.12 B55 Note: Cone with tip 10% extra.

Sockets, double Cat. No. Shank Socket Length mm. 112.102.1 B7 80 112.102.2 B10 80 112.102.3 B14 80 112.102.4 B19 80 112.102.5 B24 80 112.102.6 B29 90 112.102.7 B34 100 112.102.8 B40 110 Note: Socket with Hooks, 20% extra.

60 [email protected] I www.pinnaclescientific.com STANDARD JOINTS, STOPPERS, ADAPTERS

Cones, Plain End, Double, or with tip Cat. No. Shank Socket Length mm. 112.103.1 B7 80 112.103.2 B10 80 112.103.3 B14 80 112.103.4 B19 80 112.103.5 B24 80 112.103.6 B29 90 112.103.7 B34 100 112.103.8 B40 110 Note: Cones with tip, 10% extra.

Cones, Plain End Double (Spherical Joint) Cat. No. Joint Approx Size Bore mm. 112.104.1 S13 2 112.104.2 S13 5 112.104.3 S19 9 112.104.4 S29 15 112.104.5 S35 21 112.104.6 S41 25 112.104.7 S51 28

STOPPERS

Stoppers, Hollow, Hexagonal/Penny head

Cat. No. Shape Cone 113.100.1 Hexagonal B7orB10 113.100..2 B12or B14 113.100.3 B19 113.100.4 B24 113.100.5 B29 113.100.6 B34 113.100.7 Penny Head B40 113.100.8 B45 113.100.9 B50 113.100.10 B55

[email protected] I www.pinnaclescientific.com 61 STANDARD JOINTS, STOPPERS, ADAPTERS Stoppers, Solid Penny or flat Head Cat. No. Cone 113.101.1 B10 113.101.2 B14 113.101.3 B19 113.101.4 B24 113.101.5 B29 113.101.6 B34

Cap, fitted with hooks

Cat. No. Cone

113.102.1 B10 113.102.2 B14 113.102.3 B19 113.102.4 B24 113.102.5 B34

Adapters, Reduction

Cat. No. Socket Cone 113.103.1 B14 B19 113.103.2 B14 B24 113.103.3 B14 B29 113.103.4 B19 B24 113.103.5 B19 B29 113.103.6 B19 B34 113.103.7 B19 B40 113.103.8 B19 B45 113.103.9 B19 B55 113.103.10 B24 B29 113.103.11 B24 B34 113.103.12 B24 B40 113.103.13 B24 B45 113.103.14 B24 B50 113.103.15 B24 B55 113.103.16 B29 B34 113.103.17 B29 B40 113.103.18 B29 B45 113.103.19 B29 B50 113.103.20 B29 B55 113.103.21 B34 B40 113.103.22 B34 B45 113.103.23 B34 B50 113.103.24 B34 B55 113.103.25 B40 B55

62 [email protected] I www.pinnaclescientific.com STANDARD JOINTS, STOPPERS, ADAPTERS

Adapters, Expansion

Cat. No. Socket Cone 113.104.1 B19 B14 113.104.2 B24 B14 113.104.3 B24 B19 113.104.4 B29 B14 113.104.5 B29 B19 113.104.6 B29 B24 113.104.7 B34 B19 113.104.8 B34 B24 113.104.9 B34 B29 113.104.10 B40 B19 113.104.11 B40 B24 113.104.12 B40 B29 113.104.13 B40 B34 113.104.14 B45 B24 113.104.15 B45 B29 113.104.16 B45 B34 113.104.17 B50 B24 113.104.18 B50 B29 113.104.19 B50 B34 113.104.20 B55 B29 113.104.21 B55 B34 113.104.22 B55 B40 Note : Reduction and Expansion adapters of any other size can also be supplied.

Adapters, Multiple, with Two Necks, parallel

Cat. No. Socket Cone 113.106.1 B14 B14 113.106.2 B19 B19 113.106.3 B19 B24 113.106.4 B24 B24 113.106.5 B19 B34 113.106.6 B29 B29

Adapters, Multiple, with Two Necks at 450

Cat. No. Socket Cone 113.107.1 B19 B19 113.107.2 B19 B24 113.107.3 B19 B34

[email protected] I www.pinnaclescientific.com 63 STANDARD JOINTS, STOPPERS, ADAPTERS

Adapters, Multiple, with Three Necks, Two Parallel and one at 450

Cat. No. Socket Cone 113.108.1 B19 B24 113.108.2 B19 B29 113.108.3 B19 B34 113.108.4 B19 B45 113.108.5 B19 B55

Adapters, Swan Neck

Cat. No. Socket Cone 113.109.1 B19 B19 113.109.2 B19 B24 113.109.3 B24 B24 113.109.4 B24 B34

Adapters, Receiver, Plain Bend short/Long

Cat. No. Socket 113.110.1 B14 113.110.2 B19 113.110.3 B24 113.110.4 B29 113.110.5 B34 113.110.6 B40 113.110.7 B45 113.110.8 B50 113.110.9 B55

Adapters, Straight, Delivery, bent, short or long

Cat. No. Socket

113.111.1 B14 113.111.2 B19 113.111.3 B24 113.111.4 B29 113.111.5 B34

64 [email protected] I www.pinnaclescientific.com STANDARD JOINTS, STOPPERS, ADAPTERS

Adapters, Receiver, Bent with Vent

Cat. No. Socket Cone 113.112.1 B14 B14 113.112.2 B19 B19 113.112.3 B19 B24 113.112.4 B24 B24 113.112.5 B29 B29 113.112.6 B34 B34 113.112.7 B40 B40

Adapters, Receiver, Bent or straight with vacuum connection

Cat. No. Socket Cone 113.113.1 B14 B14 113.113.2 B19 B19 113.113.3 B14 B24 113.113.4 B19 B24 113.113.5 B24 B24 113.113.6 B29 B29 113.113.7 B34 B34 113.113.8 B40 B40

Adapters, Receiver, Bent with Socket Connections

Cat. No. Socket Cone 113.114.1 B14 B14 113.114.2 B19 B19 113.114.3 B19 B24 113.114.4 B24 B24

Adapters, Receiver, Bent with Multiple Connection (Pig)

Cat. No. Socket Cone 113.115.1 B14 B14 113.115.2 B19 B14 113.115.3 B14 B19 113.115.4 B29 B14 113.115.5 B19 B19 113.115.6 B24 B24

[email protected] I www.pinnaclescientific.com 65 STANDARD JOINTS, STOPPERS, ADAPTERS

Adapter, Perkin Intermediate Receiver

Cat. No. Socket Cone 113.116.1 B14 B14 113.116.2 B19 B19 113.116.3 B19 B24 113.116.4 B24 B24 113.116.5 B34 B24 113.116.6 B34 B34

Adapters, Receiver, Plain Bent

Cat. No. Socket Cone 113.117.1 B14 B14 113.117.2 B19 B19 113.117.3 B19 B24 113.117.4 B24 B24 113.117.5 B29 B29 113.117.6 B34 B34 113.117.7 B40 B40

Adapter, Receiver, Multi-Limb Vacuum

Cat. No. Socket Cone 113.118.1 B19 B14

Adapter, Receiver, Vertical Delivery

Cat. No. Socket Cone 113.119.1 B19 B19

Adapter, Receiver, Sloping Delivery

Cat. No. Socket Cone 113.120.1 B19 B19

66 [email protected] I www.pinnaclescientific.com STILL HEADS / SPLASH HEADS

STILL HEADS/SPLASH HEADS Still Heads, recovery Bend, Sloping (Elbow)

Cat. No. Cone Cone fitting fitting flask condenser 114.100.1 B14 B14 114.100.2 B24 B14 114.100.3 B19 B19 114.100.4 B24 B19 114.100.5 B29 B19 114.100.6 B29 B24 114.100.7 B29 B29 114.100.8 B34 B19 114.100.9 B24 B24 114.100.10 B34 B24 114.100.11 B55 B24 114.100.12 B34 B34

Still Heads, Recovery Bend, vertical

Cat. No. Cone Cone fitting fitting flask condenser 114.101.1 B14 B14 114.101.2 B19 B19 114.101.3 B24 B19 114.101.4 B24 B24 114.101.5 B34 B34

Recovery Heads, sloping with B14 Socket for thermometer pocket

Cat. No. Cone Cone fitting fitting flask condenser 114.102.1 B14 B14 114.102.2 B19 B19 114.102.3 B24 B19 114.102.4 B29 B19 114.102.5 B34 B19 114.102.6 B24 B24 114.102.7 B34 B24 114.102.8 B55 B24 114.102.9 B34 B34 114.102.10 B55 B34 Any other size can also be supplied. [email protected] I www.pinnaclescientific.com 67 STILL HEADS / SPLASH HEADS

Claisen Heads, Sloping with 2 x B 14 Socket

Cat. No. Cone Cone fitting fitting flask condenser 114.103.1 B14 B14 114.103.2 B19 B19 114.103.3 B24 B19 114.103.4 B34 B19 114.103.5 B24 B24 114.103.6 B34 B24

Splash Heads, pear Shape, Sloping

Cat. No. Cone Cone fitting fitting flask condenser 114.104.1 B19 B19 114.104.2 B24 B19 114.104.3 B24 B24 114.104.4 B24 B29 114.104.5 B29 B19 114.104.6 B29 B24 114.104.7 B29 B29 114.104.8 B34 B19 114.104.9 B34 B24 114.104.10 B34 B29 114.104.11 B34 B34

Splash Heads, pear Shape, Vertical

Cat. No. Cone Cone fitting fitting flask condenser 114.105.1 B19 B19 114.105.2 B24 B19 114.105.3 B24 B24 114.105.4 B34 B34 114.105.5 B34 B24

68 [email protected] I www.pinnaclescientific.com STILL HEADS / SPLASH HEADS

Splash Heads, Adapter, straight

Cat. No. Socket Cone fitting condenser 114.106.1 B19 B24 114.106.2 B24 B24

Steam Distillation Heads, Pear Shape, Sloping

Cat. No. Cone Cone fitting fitting flask condenser 114.107.1 B24 B19 114.107.2 B34 B19 114.107.3 B34 B24

Splash Head, Double Bulb, Sloping

Cat. No. Flask Cond. Socket Cone Cone 114.108.1 B24 B19 B14

Anti-Foaming Splash Head, Sloping

Cat. No. Flask Cond. Socket Cone Cone 114.109.1 B24 B19 B14

[email protected] I www.pinnaclescientific.com 69 MISCELLANEOUS FITTING

MISCELLANEOUS FITTINGS Adapters, Cone to Rubber Tubing, Straight or Right angle connection, with stopcock Cat. No. Cone 120.100.1 B14 120.100.2 B19 120.100.3 B24 120.100.4 B29 120.100.5 B34 120.100.6 B40

Adapters, Socket to Rubber Tubing, Straight or Right angle connection, with stopcock Cat. No. Cone 120.101.1 B14 120.101.2 B19 120.101.3 B24 120.101.4 B29 120.101.5 B34 120.101.6 B40

Adapters, Cone to Rubber Tubing, Straight or Right angle connection Cat. No. Cone 120.102.1 B14 120.102.2 B19 120.102.3 B24 120.102.4 B29 120.102.5 B34

Adapters, Cone with stem to Rubber Tubing, straight bent, stem length 150mm. Cat. No. Cone 120.103.1 B14 120.103.2 B19 120.103.3 B24 120.103.4 B29 120.103.5 B34

70 [email protected] I www.pinnaclescientific.com MISCELLANEOUS FITTING

Adapters, Socket to Rubber Tubing, Straight connection Cat. No. Cone 120.104.1 B19 120.104.2 B24 120.104.3 B29 120.104.4 B34

Adapters, Socket to cone with T connection

Cat. No. Socket Cone 120.105.1 B14 B14 120.105.2 B14 B19 120.105.3 B14 B24 120.105.4 B19 B19 120.105.5 B19 B24 120.105.6 B19 B34 120.105.7 B24 B24 120.105.8 B24 B34 120.105.9 B34 B34

Thistle Funnel head, with B24 cone

Cat. No. Description

120.106.1 as above

U Tube, with two sockets or cones Cat. No. Cone 120.107.1 B14 120.107.2 B19

Drying Tube

Cat. No. Cone 120.108.1 B14 120.108.2 B19 120.108.3 B24 120.108.4 B29 120.108.5 B34

[email protected] I www.pinnaclescientific.com 71 MISCELLANEOUS FITTING

Thermometer Pocket, Closed End

Cat. No. Cone Stem Length 120.109.1 B14 40 120.109.2 B14 100 120.109.3 B14 150 120.109.4 B14 200 120.109.5 B19 50 120.109.6 B19 100 120.109.7 B19 150 120.109.8 B19 200 120.109.9 B19 300 120.109.10 B24 60 120.109.11 B24 100 120.109.12 B24 200 120.109.13 B24 300

Air/Steam Inlet Tubes, Straight

Cat. No. Cone Stem Length 120.110.1 B10 100 120.110.2 B14 150 120.110.3 B19 150 120.110.4 B24 150 120.110.5 B29 150 120.110.6 B34 150

Air Leak tube/Gas Inlet tube

Cat. No. Cone 120.111.1 B14 120.111.2 B19 120.111.3 B24 120.111.4 B29 120.111.5 B34

72 [email protected] I www.pinnaclescientific.com STIRRER

STIRRERS

Stirrers, Teflon Bladed, Removable from the Stirrer Shaft

Cat. No. Approx. Shaft Smallest Blade Shaft dia Length Socket width mm. mm. through mm. which Stirrer will pass 120.112.1 6 450 B19 52 120.112.2 6 450 B24 76 120.112.3 8 450 B24 76 120.112.4 8 450 B29 100 120.112.5 8 450 B34 100 120.112.6 10 450 B34 100 120.112.7 10 600 B34 125 120.112.8 10 600 B50 150 Shaft for Teflon Bladed stirrers, 120.112.9 6 450 120.112.10 8 450 120.112.11 8 600 120.112.12 10 450 120.112.13 10 600

Stirrers, Link 120.113.1 6 450 B24 75 120.113.2 6 600 B24 75 120.113.3 8 450 B24 75 120.113.4 8 600 B24 75

Stirrers, Collapsible Paddle

120.114.1 6 450 B24 75 120.114.2 6 600 B24 75 120.114.3 8 450 B24 75 120.114.4 8 600 B24 75

Stirrers, Fixed Paddle 120.115.1 6 600 B55 50 120.115.2 8 600 B55 50 120.115.3 11 750 100mm 80

[email protected] I www.pinnaclescientific.com 73 STIRRER

Stirrers, Anchor

Cat. No. Approx. Shaft Smallest Blade Shaft dia Length Socket width mm. mm. through mm. which Stirrer will pass 120.116.1 6 450 100mm flat flange 95 120.116.2 6 600 100mm flat flange 140 120.116.3 11 750 100mm flat flange 140

Stirrers, Centrifugal 120.117.1 6 600 B55 52 120.117.2 11 750 100mm flat flange 92

Stirrers, PTFE Bladed Cat. No. Shaft Length To Pass Width 120.118.1 6 450 B19 50 120.118.2 6 450 B24 75 120.118.3 8 600 B34 100 120.118.4 8 600 B34 125 120.118.5 11 750 B55 150 120.118.6 11 750 B55 200

Stirrers, Semi Micro

Cat. No. Center Side Capacity Neck Neck ml. 120.119.1 Screw 4 210 120.119.2 Anchor 4 210

Stirrers Guides and Gland

Cat. No. To fit Socket Cone Approx. Stirrer shaft stem length 120.120.1 6 mm B19 B19 200 mm 120.120.2 10 mm B24 B24 300 mm

74 [email protected] I www.pinnaclescientific.com STIRRER

Mercury seal & Guide

Cat. No. To fit Cone Approx. Stirrer shaft stem length 120.121.1 6 mm B19 200 mm 120.121.2 6 mm B24 200 mm 120.121.3 8 mm B34 200 mm

Mercury Seal Glands and Cap

Cat. No. To fit Cone Stirrer shaft 120.122.1 6 mm B19 120.122.2 6 mm B24 120.122.3 8 mm B34 120.122.4 6 or 8 mm B24 with Teflon tube 120.122.5 6 or8 mm B34 with Teflon tube

Stuffing Box Glands with Pulley Cat. No. Material To fit Cone of cone Stirrer shaft 120.123.1 PTFE 6 mm B19 120.123.2 PTFE 6-8 mm B24 120.123.3 PTFE 8 mm B34 120.123.4 PTFE 10 mm B40 120.123.5 PTFE 10 mm B50

Simple Glands with cap

Cat. No. To fit Cone Stirrer shaft 120.124.1 6 mm B14 120.124.2 6 mm B19 120.124.3 6 mm B24

[email protected] I www.pinnaclescientific.com 75 FUNNELS, SEPARATING/DROPPING FUNNELS

FUNNELS, SEPARATING/DROPPING FUNNELS

Funnel filtering, 600 angle with stem. Cat. No. Diameter mm. 121.100.1 12 121.100.2 25 121.100.3 38 121.100.4 50 121.100.5 65 121.100.6 75 121.100.7 100 121.100.8 125 121.100.9 150 121.100.10 200 121.100.11 250 121.100.12 300

Powder Funnel, plain 121.100.13 75 121.100.14 100 121.100.15 125 121.100.16 150 121.100.17 200

Powder Funnel with cone B24 121.100.18 75 121.100.19 100 121.100.20 125 121.100.21 150 121.100.22 200

Thistle Funnel, 30 cm. stem Cat. No. Description 121.101.1 as above

Micro Funnel, 20 mm. dia. Cat. No. Description 121.102.1 as above

76 [email protected] I www.pinnaclescientific.com FUNNELS, SEPARATING/DROPPING FUNNELS

Separating Funnels, with glass Stopcock, interchangeable stopper, Conical/ Pear Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.103.1 25/30 B14 121.103.2 50/60 B14 121.103.3 100/125 B19 121.103.4 250 B19 121.103.5 500 B24 121.103.6 1000 B29 121.103.7 2000 B29

Separating Funnels, AMBER, with glass Stopcock, interchangeable stopper, Conical/ Pear Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.104.1 25/30 B14 121.104.2 50/60 B14 121.104.3 100/125 B19 121.104.4 250 B19 121.104.5 500 B24 121.104.6 1000 B29 121.104.7 2000 B29

Separating Funnels, with Screw type, PTFE Rota flow Stopcock, interchangeable stopper, Conical/Pear Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.105.1 25/30 B14 121.105.2 50/60 B14 121.105.3 100/125 B19 121.105.4 250 B19 121.105.5 500 B24 121.105.6 1000 B29 121.105.7 2000 B29

[email protected] I www.pinnaclescientific.com 77 FUNNELS, SEPARATING/DROPPING FUNNELS

Separating Funnels, with PTFE key Stopcock, interchangeable stopper, Conical/Pear Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.106.1 25/30 B14 121.106.2 50/60 B14 121.106.3 100/125 B19 121.106.4 250 B19 121.106.5 500 B24 121.106.6 1000 B29 121.106.7 2000 B29

Separating Funnels, with Stopcock, interchangeable stopper, Globe Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.107.1 25/30 B14 121.107.2 50/60 B14 121.107.3 100/125 B19 121.107.4 250 B19 121.107.5 500 B24 121.107.6 1000 B29 121.107.7 2000 B29 121.107.8 3000 B34 121.107.9 5000 B40

Separating Funnels, with PTFE key Stopcock, Rota flow interchangeable stopper, Globe Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.108.1 25/30 B14 121.108.2 50/60 B14 121.108.3 100/125 B19 121.108.4 250 B19 121.108.5 500 B24 121.108.6 1000 B29 121.108.7 2000 B29 121.108.8 3000 B34 121.108.9 5000 B40

Separating Funnels, with PTFE key Stopcock, inter changeable stopper, Globe Shape with plain Stem

Cat. No. Capacity Neck ml. Size 121.109.1 25/30 B14 121.109.2 50/60 B14 121.109.3 100/125 B19 121.109.4 250 B19 121.109.5 500 B24 121.109.6 1000 B29 121.109.7 2000 B29 121.109.8 3000 B34 121.109.9 5000 B40

78 [email protected] I www.pinnaclescientific.com FUNNELS, SEPARATING/DROPPING FUNNELS

Separating Funnels, Pear shape, with Socket, Glass Stopcock and stem with Cone but without stopper

Cat. No. Capacity Socket Cone ml. 121.110.1 25 B14 B14 121.110.2 50 B14 B14 121.110.3 50 B19 B19 121.110.4 100 B14 B14 121.110.5 100 B19 B19 121.110.6 250 B14 B14 121.110.7 250 B19 B19 121.110.8 500 B19 B19 121.110.9 500 B24 B24 121.110.10 1000 B19 B19 121.110.11 1000 B24 B24

Separating funnels, pear shape, with socket, screw type PTFE key Rota flow Stopcock and stem with cone but without stopper

Cat. No. Capacity Socket Cone ml. 121.111.1 25 B14 B14 121.111.2 50 B14 B14 121.111.3 50 B19 B19 121.111.4 100 B14 B14 121.111.5 100 B19 B19 121.111.6 250 B14 B14 121.111.7 250 B19 B19 121.111.8 500 B19 B19 121.111.9 500 B24 B24 121.111.10 1000 B19 B19 121.111.11 1000 B24 B24

Dropping Funnels, Cylindrical, open top, with Gas outlet tube, with Stem

Cat. No. Capacity Cone Cone ml. 121.112.1 50 B19 B24 121.112.2 100 B19 B24 121.112.3 250 B19 B24

Funnel, Separating, open top

Cat. No. Capacity Cone ml. 121.113.1 50 B19 121.113.2 100 B19 121.113.3 250 B19

[email protected] I www.pinnaclescientific.com 79 FUNNELS, SEPARATING/DROPPING FUNNELS

Funnels, Plug Type, Capacity 50 ml. Socket B10, cone B19 Cat. No. Capacity 121.114.1 50 ml.

Dropping Funnels, Cylindrical with interchangeable stopper and stopcock, plain Stem

Cat. No. Capacity Neck ml. Size 121.115.1 50 B14 121.115.2 100 B19 121.115.3 150 B19 121.115.4 250 B19 121.115.5 500 B24 121.115.6 1000 B29

Dropping Funnels, Cylindrical, Graduated, with inter changeable stopper and stopcock, plain Stem

Cat. No. Capacity Neck ml. Size 121.116.1 50 B14 121.116.2 100 B19 121.116.3 150 B19 121.116.4 250 B19 121.116.5 500 B24 121.116.6 1000 B29

Dropping Funnels, Cylindrical with screw type PTFE key Rato flow stop cock, Inter changeable stopper, plain Stem

Cat. No. Capacity Neck ml. Size 121.117.1 50 B14 121.117.2 100 B19 121.117.3 150 B19 121.117.4 250 B19 121.117.5 500 B24 121.117.6 1000 B29

80 [email protected] I www.pinnaclescientific.com FUNNELS, SEPARATING/DROPPING FUNNELS

Dropping Funnels, Cylindrical, Graduated, with Screw Type PTFE Key Rota flow stopcock interchangeable stopper, Plain Stem

Cat. No. Capacity Neck ml. Size 121.118.1 50 B14 121.118.2 100 B19 121.118.3 150 B19 121.118.4 250 B19 121.118.5 500 B24 121.118.6 1000 B29

Separating Funnels, with PTFE Plug, Cylindrical Graduated with interchangeable stopper

Cat. No. Capacity Stopper Size ml. 121.119.1 25 B14 121.119.2 50 B19 121.119.3 100 B19 121.119.4 250 B19 121.119.5 500 B24 121.119.6 1000 B29

Dropping funnels, Cylindrical, open top, with stopcock, stem with cone

Cat. No. Capacity Cone ml. 121.120.1 50 B19 121.120.2 100 B19 121.120.3 150 B24 121.120.4 250 B19 121.120.5 250 B24

Dropping funnels, Cylindrical, open top, with screw type PTFE Key Rota flow stopcock stem with cone

Cat. No. Capacity Cone ml. 121.121.1 50 B19 121.121.2 100 B19 121.121.3 100 B24 121.121.4 250 B19 121.121.5 250 B24 121.121.6 500 B24 121.121.7 1000 B24

[email protected] I www.pinnaclescientific.com 81 FUNNELS, SEPARATING/DROPPING FUNNELS

Pressure Equalising funnels, Pear shape, with socket, with glass key stopcock and stem with cone

Cat. No. Capacity Socket Cone ml. 121.122.1 100 B19 B19 121.122.2 100 B24 B24 121.122.3 250 B19 B19 121.122.4 250 B24 B24 121.122.5 500 B19 B19 121.122.6 500 B24 B24 121.122.7 500 B34 B34

Pressure Equalising Funnels, Cylindrical, with Socket, stopcock and stem with cone

Cat. No. Capacity Socket Cone ml. 121.123.1 250 B19 B19 121.123.2 250 B24 B24 121.123.3 500 B19 B19 121.123.4 500 B24 B24 121.123.5 500 B34 B34

82 [email protected] I www.pinnaclescientific.com FRACTIONATING COLUMNS

FRACTIONATING COLUMNS Fractionating Columns, Vigreaux

Cat. No. Socket Cone Effective Length mm. 122.100.1 B24 B24 360 122.100.2 B24 B24 600 122.100.3 B29 B29 360 122.100.4 B34 B34 750

Fractionating Columns, Dufton

Cat. No. Socket Cone Effective Length mm. 122.101.1 B24 B19 150 122.101.2 B24 B19 300 122.101.3 B24 B24 150 122.101.4 B24 B24 300

Fractionating Columns, Pear Bulb

Cat. No. Socket Cone Effective Length mm. 122.102.1 B34 B24 130 122.102.2 B34 B24 250 122.102.3 B34 B24 500

Fractionating Columns, Plain designed for use with various types of columns packing

Cat.No. Socket Cone Effective Length mm. 122.103.1 B24 B24 250 122.103.2 B24 B24 500 122.103.3 B24 B24 750 122.103.4 B34 B24 250 122.103.5 B34 B34 500 122.103.6 B34 B34 600

[email protected] I www.pinnaclescientific.com 83 FRACTIONATING COLUMNS

Packing for Plain Columns

Cat. No. Description Approx. Approx. dia mm. Length mm 122.104.1 Resching ring N.G 6 100 122.104.2 Resching ring N.G 8 100 122.104.3 Resching ring N.G 10 100 122.104.4 Fenske helices N.G 6 100 122.104.5 Fenske helices N.G 8 100 122.104.6 Glass Beads N.G without Holes 4-5 500 122.104.7 —do— 5-6 500 122.104.8 — do — 6-7 500

Packing Support

Cat. No. To fit Socket Diameter Size mm. 122.105.1 B19 16 122.105.2 B24 21 122.105.3 B34 29 122.105.4 B40 35

Packing Support for Large Columns, Tubes fused in the Other Tube Length Aprox. 25mm. To fit Socket size B50 or B55 Cat. No. Description 122.106.1 With Complete packing

Fractionating Columns, Rod and Disc Pattern

Cat. No. No. of Disc 122.107.1 15 122.107.2 20

Fractionating Columns, Pear shaped bulbs

Cat.No. No. of Disc 122.108.1 4 122.108.2 8 122.108.3 12

84 [email protected] I www.pinnaclescientific.com SINTERED GLASSWARE

SINTERED GLASSWARE, POROSITY GRADES AND THEIR GENERAL USE

Cat. No. Porosity Pore Size General Use Grade 122.109.1 G-0 150-250 Coarse Filtration, Gas dispersion and support for other filter material. 122.109.2 G-1 90-150 Coarse Precipitate, Filtration, Gas disper sion, Coarse grain material filtration. 122.109.3 G-2 40-90 Medium and Crystalline precipitant filtration, medium filtration and washing of gases. 122.109.4 G-3 15-40 Fine Gas filtration and dispersion, mercury filtration, fine grain material filtration, collection of the fine precipitant, Analytical Work with medium precipitates. 122.109.5 G-4 5-15 Valves for mercury collection of very fine precipitates. Analytical work with fine precipitates.

Filtering Apparatus Witt’s, Complete with flanged jar, flanged lid, funnel and 250ml. beaker Cat. No. Description 122.110.1 as above

Filter Apparatus, Complete with filtering flask, gooch crucible with Sintered Disc of Porosity G -0 or G-1 or G-2 or G-3 or G-4, glass adapter and rubber cone

Cat. No. Flask Cap. Crucible Cap. ml. ml. 122.111.1 250 30 122.111.2 500 30 122.111.3 1000 50

Note: Please mention Porosity of Sintered Disc, Disc while Placing order.

Filter Apparatus Complete with Filtering Flask, with Socket and Buckner funnel with Sintered Disc of Porosity G-0 or G-1 or G-2 G-3 G-4 having cone

Cat. No. Flaks Cap. Crucible Cap. Joint ml. ml. 122.112.1 250 80 24/29 122.112.2 500 200 24/29 122.112.3 1000 500 29/32 122.112.4 2000 1000 29/32 Note: Please Mention Porosity of Sintered Disc, while placing order. [email protected] I www.pinnaclescientific.com 85 SINTERED GLASSWARE

Gooch Crucible Cat. No. Cap. Disc Dia Porosity ml. mm. Grade 122.113.1 15 20 1 122.113.2 15 20 2 122.113.3 15 20 3 122.113.4 15 20 4 122.113.5 30 30 1 122.113.6 30 30 2 122.113.7 30 30 3 122.113.8 30 30 4 122.113.9 50 40 1 122.113.10 50 40 2 122.113.11 50 40 3 122.113.12 50 40 4

Buckner Filter Cat. No. Cap. Disc Dia Porosity ml. mm. Grade 122.114.1 35 30 1 122.114.2 35 30 2 122.114.3 35 30 3 122.114.4 35 30 4 122.114.5 80 40 1 122.114.6 80 40 2 122.114.7 80 40 3 122.114.8 80 40 4 122.114.9 200 65 1 122.114.10 200 65 2 122.114.11 200 65 3 122.114.12 200 65 4 122.114.13 500 90 1 122.114.14 500 90 2 122.114.15 500 90 3 122.114.16 500 90 4 122.114.17 1000 120 1 122.114.18 1000 120 2 122.114.19 1000 120 3 122.114.20 1000 120 4

86 [email protected] I www.pinnaclescientific.com SINTERED GLASSWARE

Buckner Funnel, with Sintered Disc of Porosity G-0 or G-1 or G-2 or G-3 or G-4, cone at stem Cat. No. Capacity Disc. dia. Cone ml. mm. 122.115.1 35 30 14/23 or 19/26 122.115.2 80 40 14/23 or 19/26 122.115.3 200 65 19/26 or 24/29 122.115.4 500 90 19/26 or 24/29 or 29/32 122.115.5 1000 120 19/26 or 24/29 or 29/32 Note : Please mention Porosity of sintered Disc and cone size, while placing order.

Millipore Type Membrane Filter Holder Assembly with membrane support, Funnel, Flask and Clamp, Standard joint fitting

Cat. No. Membrane Funnel Flask Dia mm. Cap. ml. Cap. ml. 122.116.1 25 25 250 122.116.2 25 50 500 122.116.3 47 300 1000

Millipore Type, Membrane Filter Holder Assembly, with membrane support, Funnel, Flask and Clamp, Neoprene Rubber Cork fitting

Cat. No. Membrane Funnel Flask Dia mm. Cap. ml. Cap. ml. 122.117.1 25 25 250 122.117.2 25 50 500 122.117.3 47 300 1000

Tube Sealed, with reduced ends, with Sintered Disc. (Pipeline filter) Porosity G-0 or G-1 or G-2 or G-3 or G-4 Cat. No. Disc.dia. mm. 122.118.1 35 122.118.2 65 122.118.3 90 122.118.4 100 122.118.5 125 Note : Please mention Porosity of Sintered Disc, while placing order.

[email protected] I www.pinnaclescientific.com 87 SINTERED GLASSWARE

Conical Filter, (Hirsch type) with Sintered Disc of Porosity G-0 or G1 or G-2 or G-3 or G-4

Cat. No. Capacity Disc. dia. ml. mm. 122.119.1 20 20 122.119.2 60 30 122.119.3 175 30

Sintered Glass Filter Tube with Sintered Dic dia . Sealed in Center, Porosity G-0 or G-1 or G-2 or G-3 G-4

Cat. No. Disc. dia mm. 122.120.1 10 122.120.2 20 122.120.3 30 122.120.4 45 122.120.5 50 122.120.6 90

Note: Please mention Porosity of sintered Disc, while placing order.

Sintered Glass Gas Distribution Tube, (Filter Stick), Porosity G-0 or G-1 or G-2 or G-3 or G-4

Cat. No. Disc. dia mm. 122.121.1 10 122.121.2 20 122.121.3 30 Note: Please mention Porosity sintered Disc, while placing order.

88 [email protected] I www.pinnaclescientific.com INTERCHANGEABLE GROUND JOINT ASSEMBLIES

INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Distillation Apparatus, consists of 500 ml. Flask, 200 mm. Graham condenser, and stopper Cat. No. Description 200.100.1 as above

Distillation Apparatus, consists of 2000 ml. flask, Friedrich condenser and stopper Cat. No. Description 200.101.1 as above

Distillation Apparatus, compact Consists of 1000 ml. Erlenmeyer Flask, and Friedrich condenser Cat. No. Description 200.102.1 as above

Distillation Apparatus Ammonia, Consists of 500ml. Kjeldahl Flask, splash head and Graham condenser Cat. No. Description 200.103.1 as above

Reflux Assemblies, Consists of R.B. Flask and air condenser

Cat. No. Flask Capacity Condenser ml. effective length mm. 200.104.1 100 500 200.104.2 250 750 200.104.3 500 1000

Reflux Assemblies, consists of R.B Flask and liebig Condenser Cat. No. Flask Capacity Condenser ml. effective length mm. 200.105.1 100 300 200.105.2 250 400 200.105.3 500 500

[email protected] I www.pinnaclescientific.com 89 INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Reflux Assembly, Consists of R.B. Flask 1000 ml. and a reversible Coil Condenser

Cat. No. Description 200.106.1 as above

Reflux Assembly Consists of R.B. flask 500 ml. multiple adapter two necks, stirrer guide, rubber sleeve g land, Link stirrer 450 mm., vertical Allihn condenser 300mm

Cat. No. Description 200.107.1 as above

Reflux Assembly with Stirrer, consists of R.B. flask 1000 ml. multiple adapter three necks, stirrer guide, rubber sleeve gland, collapsible paddle stirrer 450 mm., coil condenser 150mm drying tube, separating funnel 100ml. and stopper

Cat. No. Description 200.108.1 as above

Reaction Assembly, consists of R. B. flask 500 ml. multiple adapter two necks, stirrer guide, stuffing box gland with pulley, links stirrer 1450 mm., still head, thermometer pocket, Liebig condenser 400 mm., receiver adapter bend with vent, R.B. flask 100ml

Cat. No. Description 200.109.1 as above

Reaction Assembly, Consists of R.B. flask 500ml., Liebig condenser 400 mm., adapter, T. connection, separating funnel 100ml. and stopper

Cat. No. Description 200.110.1 as above

90 [email protected] I www.pinnaclescientific.com INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Distillation Assembly, Consists of R.B. flask, splash head, double surface condenser and receiver adapter

Cat. No. Flask Capacity Condenser ml. effective length mm. 200.111.1 2000 200 200.111.2 3000 300 200.111.3 5000 400 200.111.4 10000 600

Distillation Apparatus, consists of R.B flask 500ml. still head, Liebig condenser 400 mm., receiver adapter, separating funnel 100 ml. and stopper B14 Cat. No. Description 200.112.1 as above

Distillation Apparatus, consists of R.B flask 1000 ml., recovery bend, in land revenue condenser 200 mm. and receiver adapter B24 Cat. No. Description 200.113.1 as above

Distillation Apparatus, consists of R. B flask, recovery bend, Liebig condenser and receiver adapter

Cat. No. Flask Capacity Condenser ml. effective length mm. 200.114.1 250 200 200.114.2 500 300 200.114.3 1000 350 200.114.4 2000 400

Preparation Assembly, consists of R.B Flask, Still head, Thermo-meter, Liebig Condenser and receiver adapter

Cat. No. Flask Capacity Condenser ml. effective length mm. 200.115.1 500 300 200.115.2 1000 350 200.115.3 2000 400

[email protected] I www.pinnaclescientific.com 91 INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Distillation Assemblies

200.116.1 R.B. Flask 3000 ml. B24 Socket 200.116.2 Splash head Adapter B24 Cone & socket 200.116.3 Still head B24 cone, B24 cone, B14 socket 200.116.4 Thermometer B14 cone 200.116.5 Air Condenser 400 mm., B24 Socket & Cone 200.116.6 Ether condenser B24 Socket, B19 Cone 200.116.7 Reduction Adapter B19 Socket, B24 Cone 200.116.8 Conical Flask 1000 ml. B24, Socket

Vacuum Distillation, consists of R.B. Flask 1000 ml., recovery bend, jacked coil condenser 150mm., receiver adapter bend with vent and R.B flask 250ml. Cat. No. Description 200.117.1 as above

Kjeldahl Distillation Assembly, consists of R.B Flask 1000 ml., multiple adapter two necks, splash head vertical, Liebig condenser, receiver adapter and dropping funnel 100 ml. Cat. No. Description 200.118.1 as above

Kjeldahl Distillation Assembly, consists of R.B. Flask 500 ml., multiple adapter two necks, splash head vertical, Liebig condenser, receiver adapter and dropping funnel 100 ml. Cat. No. Description 200.119.1 as above

Funnel, Connecting, Bent (for Kjeldahl Assembly)

Cat. No Bulb Dia 200.120.1 100

Absorber (for Kjeldahl Assembly) Cat. No Bulb Dia 200.121.1 40

92 [email protected] I www.pinnaclescientific.com INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Gas Evolution Assembly, consists of conical flasks 1000ml. and adapter with T. connection, separating funnel 500 ml. and stopper

Cat. No. Description 200.122.1 as above

Gas Evolution Assembly, consists of Buckner flasks 1000ml., and thistle funnel head

Cat. No. Description 200.123.1 as above

Gas Evolution Assembly, consists of conical flasks 500ml., and Separating funnel 200ml.

Cat. No. Description 200.124.1 as above

Steam Distillation Assembly, consists of R.B flask 2 necks 500 ml., splash head, Liebig condenser 200mm., receiver adapter and air leak tube

Cat. No. Description 200.125.1 as above

Steam Distillation assembly, consists of R.B flask 500 ml., steam distillation head, Liebig condenser 400 mm., receiver adapter.

Cat. No. Description 200.126.1 as above

Steam Distillation assembly, consists of R.B flask 1000ml., multiple adapter two necks, air leak tube bent, recovery bend slopping, jacketed coil condenser and receiver adapter.

Cat. No. Description 200.127.1 as above

Vacuum Sublimation Assembly, Consists of Test tube, adapter with T connection and immersion condenser

Cat. No. Description 200.128.1 as above

[email protected] I www.pinnaclescientific.com 93 INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Recovery Assembly, consists of R.B flask 250 ml.,multiple adapter two necks, recovery bend slopping, Liebig condenser 400mm., receiver adapter and dropping funnel 100ml.

Cat. No. Description 200.129.1 as above

Recovery Assembly, consists of R. B. flask 2000 ml., still head, jacketed coil condenser 150mm., receiver adapter, separating funnel 100ml. and stopper Cat. No. Description 200.130.1 as above

Solvent Recovery Assembly, consists of R. B. flask 150ml., recovery bend, jacketed coil condenser 150 mm. and receiver adapter.

Cat. No. Description 200.131.1 as above

Solvent Recovery Assembly, consists of R. B. flask 250 ml., recovery bend sloping, Liebig condenser 400 mm, receiver adapter bend with vent and R.B. flask 250ml.

Cat. No. Description 200.132.1 as above

Solvent Recovery Assembly, consists of R. B. flask 500 ml., recovery bend sloping, Liebig condenser 200mm., Ether condenser and Buckner flask.

Cat. No. Description 200.133.1 as above

Solvent Recovery Assembly, consists of R.B. flask 3000ml., splash head adapter vertical , still head recovery with thermometer pocket, Air condenser, Ether con denser, Receiver adapter, Conical flask 1000 ml. and Thermometer.

Cat. No. Description 200.134.1 as above

94 [email protected] I www.pinnaclescientific.com INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Fractionation Assembly, consists, of R.B flask 500 ml., Cup joint adapter, Ball joint adapter, Joint Clip S-335, Air Condenser, Multiple adapter two necks parallel, Immersion Condenser, Still head recovery, thermometer pocket, Liebig condenser and receiver adapter straight.

Cat. No. Description 200.135.1 as above

Fractionation Assembly, consists of R.B. flask 250. ml., Air condenser, Still head recovery Thermometer, Liebig condenser, Bend with multiple connections and vacuum connection and 3 R.B flasks 25ml.

Cat. No. Description 200.136.1 as above

Fractionation Assembly, consists of R.B flask 1000ml., Swan neck adapter, Air condenser, Multiple adapter two neck at 450, Immersion condenser, Still head, Thermometer, Leibig condenser, Ball Joint adapter with socket, Cup joint adapter with cone, separating funnel 100ml., vacuum release stop cock and joint clip.

Cat. No. Description 200.137.1 as above

Continuous Water Distillation Assembly, consists of two neck flask 2000ml., dropping funnel 100ml. splash head, jacketed coil condenser, receiver adapter and conical flask.

Cat. No. Description 200.138.1 as above

Distillation Apparatus, Vertical Type with special type double surface condenser and automatic feeding arrangement with standard joints w/o stand and heating arrangement. Cat.No. Flask Capacity Stage ml. 200.139.1 1000 Single 200.139.2 2000 Single 200.139.3 3000 Single 200.139.4 5000 Single 200.139.5 1000 Double 200.139.6 2000 Double 200.139.7 3000 Double 200.139.8 5000 Double

[email protected] I www.pinnaclescientific.com 95 INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Vacuum Distillation Unit consists of 20litre reaction vessel with 100mm. flat flange, adapter with five necks, joining clip 100 mm. with teflon gasket, gas inlet tube, thermometer pocket, stopper, recovery bend, thermometer, stirrer guide, ground sleeve gland, anchor stirrer 750mm., double coil condenser 380 mm., intermediate flask 500ml., vacuum control stopcock, adapter, R.B flask two neck 2000ml. and vacuum release stopcock. Cat. No. Description 200.140.1 as above

Distillation Tower, complete for fractional Distillation of liquids in atmosphere of reduced pressure, consists of two flasks of 500ml. and 1000ml., Three necks, fractionating column 24" long, filled with rasching rings, Double walled heater jacket, Rheostat, total condensation variable take off still head, coil connecting receiver,

flask 500ml., Ca CI2 Tube, Tap connecting piece, Thermometer, Retort stand, clamps, rings heating mantle for 1000ml. flask

Cat. No. Description 200.141.1 as above

Vacuum Drying Pistol , consists of Desicant flask 100 ml. Boiling flask 250ml. etc.

Cat. No. Description 200.142.1 as above

Alkoxyle and Alkylimino Group Determination Apparatus (Micro Zeisel)

Cat. No. Description 200.143.1 as above

Micro Acetyl Group Determination Apparatus, (Wiesenberger)

Cat. No. Description 200.144.1 as above

Mercury Distillation Assembly, Hulett, consists, of distillation flask 500ml. stopcock controlled air bleeding tube, air condenser 500mm., Liebig condenser 200mm., Vacuum receiver adaptor and receiver bottle.

Cat. No. Description 200.145.1 as above

Climbing Film Evaporator

Cat. No. Description 200.146.1 as above

96 [email protected] I www.pinnaclescientific.com INTERCHANGEABLE GROUND JOINT ASSEMBLIES

Circulatory Cyclone Evaporator

Cat. No. Description 200.147.1 as above

Tucker Gas Generator, (For air free co2), consists of Aspirator bottle 5 liter, Reservoir 2 Liter etc.

Cat. No. Description 200.148.1 as above

Cavett Blood Test Apparatus

Cat. No. Description 200.149.1 as above

Freeze Drying Manifold

Cat. No. Description 200.150.1 as above

Kozellka and Hine, Blood Test Apparatus

Cat. No. Description 200.151.1 as above

CarbaryI Content Determination Apparatus, as per I.S. specification

Cat. No. Description 200.152.1 as above

Steam Distillation Apparatus for Fluoride Determination as per I.S. Specification

Cat. No. Description 200.153.1 as above

[email protected] I www.pinnaclescientific.com 97 DESICCATORS

DESICCATORS

Desiccators, Vacuum with cover & Stopcock bodies and covers are designed for strength and utility, made from Hard Glass

Cat. No. Inner Dia mm. 201.100.1 150 mm. 201.100.2 210 mm. 201.100.3 250 mm. 201.100.4 300 mm.

Desiccators, with ground cover & knob Hard Glass

Cat. No. Inner Dia mm. 201.101.1 150 mm. 201.101.2 210 mm. 201.101.3 250 mm. 201.101.4 300 mm.

98 [email protected] I www.pinnaclescientific.com WATER STILL

Water Still : Comprises of a horizontal borosilicate glass boiler fitted with a 3 KW chromium plated immersion heater with cut off, double coil high efficiency condenser ensure a reliable output of single distillate. The still is fitted on a sheet metal epoxy coated stand, suitable for bench or wall mounting. For use on 220/240 V. 50/60 Hz single phase supply. Distillate Output : 4 Liters/hr approx. Ph : 5 to 6.5 pyrogen free.

Note : ph conductivity and sensitivity are affected by temperature and the presence of absorbed carbon dioxide. The basis of tests are at 200 C on distilled water free of carbon dioxide. Care is needed to obtain pyrogen free water and the distillate must be tested before use. Pretreated input water (use of softener) is recommended for obtaining better results and to increase the still life.

Spares

300.100.1 Boiler for water Still. 300.100.2 Condenser for water Still. 300.100.3 Heater 3 KW with cut off.

Water Still, are carefully designed to produce high purity pyrogen free distilled water. The water still of borosilicate glass comprises of horizontal type boiler, condenser, constant level device, Silica sheeted heaters, along with stand and clamps. All parts are replaceable. Cat. No. Description 300.101.1 Single Still without Cut off, output 1.5 Lt./Hr. approx. 300.101.2 Single Still with thermal sensor Auto Cut off, output 1.5 Lt. /Hr. 300.101.3 Double still without Cut off, output 1.5 lt./Hr. approx. 300.101.4 — do — Auto Cut off, output 1.5 Lt./Hr. 300.101.5 Single Still with thermal sensor Auto Cut off, output 3 Lt./Hr. 300.101.6 Double Still will thermal sensor Auto Cut off, output 3 Lt./Hr. SPARE PARTS 300.101.7 Constant level device 300.101.8 Boling chamber for 1.5 Lt./Hr. 300.101.9 Boling chamber for 3 Lt. /Hr. Still 300.101.10 Condenser for 1.5 Lt. /Hr. Still 300.101.11 Condenser for 3 Lt. /Hr. Still 300.101.12 Silica Tube, Sheathed heater with Bakelite Cap. 300.101.13 Automatic thermal sensor cut off for Single still 300.101.14 — do — for Double Still 300.101.15 Water Softener Suitable for above stills. Note: Automatic cut off offered above have been newly designed. A sensitive thermal sensor has been provided, so no outside electrodes are needed. It is more sturdy and reliable as compared to the conventional type. [email protected] I www.pinnaclescientific.com 99 WATER DISTILLATIONS

WATER DISTILLATIONS Automatic, Electrically Heated, All glass Distillation Apparatus, N.P.L. Design, heater embedded in spiral glass tube complete with C.I. heavy base, S.S. Road, Clamps, board etc.

Cat. No. Flask Cap. Description 301.100.1 3 liter Single Distillation without cut off. 301.100.2 3 liter Single Distillation with thermal sensor auto cut off 301.100.3 5 liter Single Distillation without cut off 301.100.4 5 liter Single Distillation with thermal sensor auto cut off 301.100.5 10 liter Single Distillation without cut off 301.100.6 10 liter Single distillation with thermal sensor auto cut off 301.100.7 3 liter Double Distillation without cut off 301.100.8 3 liter Double Distillation with thermal sensor auto cut off 301.100.9 5 liter Double Distillation without cut off 301.100.10 5 liter Double Distillation with thermal sensor auto cut off 301.100.11 10 liter Double Distillation without cut off 301.100.12 10 liter Double Distillation with thermal sensor auto cut off 301.100.13 3 liter Triple Distillation with out cut off 301.100.14 3 liter Triple Distillation with thermal sensor auto cut off 301.100.15 5 liter Triple Distillation W/O cut off 301.100.16 5 liter Triple Distillation with thermal sensor auto cut off 301.100.17 10 liter Triple Distillation without cut off 301.100.18 10 liter Triple Distillation with thermal sensor auto cut off

SPARE PARTS 301.100.19 Flask with heater 3 liter. 301.100.20 Flask with heater 5 liter. 301.100.21 Flask with heater 10 liter. 301.100.22 Condenser for 3 liter Distillation with B40 Cone. 301.100.23 Condenser for 5 liter Distillation with B40 Cone.

100 [email protected] I www.pinnaclescientific.com WATER DISTILLATIONS

301.100.24 Condenser for 10 liter Distillation with B50 Cone. 301.100.25 Automatic thermal sensor cut off for single Distillation. 301.100.26 -do- for Double Distillation. 301.100.27 -do— for Triple Distillation. 301.100.28 Receiving tube for condenser. 301.100.29 Stand for single distillation for 3,5 or 10 liter flask. 301.100.30 Stand for Double Distillation. Note: Automatic cut off device offered above have been newly designed. Two sensitive thermal sensors have been provided so no out-side electrodes are needed. It is more sturdy and reliable as compared to the conventional type. We don’t take guarantee for the life of heaters and electrical parts.

Water Distillation Apparatus, Quartz Boiler with in built heater and Glass Condenser, complete with stand, Clamps etc. conductivity of Distilled water produced is less than 1u S cm1, ph 6-7, suitable for HPLC Cat. No. Description 301.101.1 Output approx. 2.0 Lt/Hr. 301.101.2 -do-with Auto Thermal Sensor cut off. 301.101.3 Output approx. 5Lt../Hr. 301.101.4 -do-with Auto Thermal Sensor cutoff. 301.101.5 All Quartz Double Distillation with auto cut off-out put approx1.51t/hr. 301.101.6 - do - 2.5 it/hr.

[email protected] I www.pinnaclescientific.com 101 EXTRACTION APPARATUS

EXTRACTION APPARATUS Soxhlet Extraction Apparatus, consists of Flask, Extractor and Condenser

Cat. No. Extractor Extractor Extractor Flask Condenser Capacity Socket Cone Capacity length ml. R.B./F.B. mm. 302.100.1 20 B24 B19 50 200 302.100.2 40 B24 B24 100 200 302.100.3 60 B34 B24 150 200 302.100.4 100 B34 B24 250 200 302.100.5 100 B40 B24 250 200 302.100.6 200 B50 B24 500 250 302.100.7 400 B50 B24 1000 250 302.100.8 600 B50 B24 2000 300 302.100.9 1000 B55 B34 3000 300 302.100.10 2000 B55 B34 5000 300 302.100.11 3000 B55 B34 10000 350

Spare Extractor for Soxhlet Apparatus

Cat No. Capacity Socket Cone ml. 302.101.1 20 B24 B19 302.101.2 40 B24 B24 302.101.3 60 B34 B24 302.101.4 100 B34 B24 302.101.5 100 B40 B24 302.101.6 200 B50 B24 302.101.7 400 B50 B24 302.101.8 600 B50 B24 302.101.9 1000 B55 B34 302.101.10 2000 B55 B34 302.101.11 3000 B55 B34

Soxhlet Extraction Apparatus, consists of R.B. flask with flat flange, reduction adapter with flat flange socket Extractor and double surface condenser. Cat.No. Extractor Cap. Flask Cap. ml. ml. 302.102.1 600 2000 302.102.2 1000 3000 302.102.3 2000 5000 302.102.4 3000 10000

102 [email protected] I www.pinnaclescientific.com EXTRACTION APPARATUS/ CHROMATOGRAPHIC APPARATUS

Soxhlet Extraction Apparatus, consists of R.B flask, Globular type Extractor and double surface condenser. Cat.No. Extractor Cap. Flask Cap. ml. ml. 302.103.1 1000 2000 302.103.2 2000 3000 302.103.3 3000 5000 302.103.4 4000 10000 302.103.5 6000 10000

Soxhlet Fat Extraction Apparatus, consists of R.B flask, Aspirator type Extractor and double surface condenser with fitting. Cat.No. Extractor Cap. Flask Cap. ml. ml. 302.104.1 5000 5000 302.104.2 10000 10000 302.104.3 20000 20000

CHROMATOGRAPHIC APPARATUS Chromatography apparatus, semi micro, Consisting funnel Reservoir 50ml. capacity with B14 cone and Socket, column tube with cap, 12 mm dia., 10cm effective length with B14 socket B19 cone and fused sintered disc, Filtering flask 100ml. with B19 socket, lamping rod 40 cm long.

Cat. No. Description 303.100.1 as above

Chromatography Apparatus, consisting dropping funnel 250ml. with B-19 cone, reduction adapter with B19 socket and B24 cone, Column tube 2cm dia. 20cm. effective length with B24 socket, B19 cone and fused sintered disc, Adapter with tap B19 socket, B24 cone, filtering flask 250ml with B24 socket, Tamping Rod 50 cm. long.

Cat. No. Description 303.101.1 as above

Chromatography absorption assembly, consisting Linchner flask 1 liter Capacity, B24 Socket, tap adapter, B24 cone, B19 socket, cone adapter with filter disc, B19 and B34 cones, column 50cm long with 1.5 pipe flange, B-34 socket, flange adapter 1.5, B-24 socket metal flange with teflon gasket reservoir globular 5 Lit. B-24 Cone, B-34 socket cone adapter B- 34 cone.

Cat. No. Description 303.102.1 as above 303.103.1 with 90 cm. Column with D-2 pipe flange.

[email protected] I www.pinnaclescientific.com 103 CHROMATOGRAPHIC APPARATUS

Chromatography Columns, with integral sintered disc., without stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.104.1 15 10 303.104.2 20 15 303.104.3 30 15 303.104.4 40 20 303.104.5 40 30 303.104.6 50 30 303.104.7 50 40 303.104.8 60 40 303.104.9 75 40 303.104.10 100 40

Chromatography Columns, with integral sintered disc and stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.105.1 15 10 303.105.2 20 15 303.105.3 30 15 303.105.4 40 20 303.105.5 40 30 303.105.6 50 30 303.105.7 50 40 303.105.8 60 40 303.105.9 100 40

Chromatography Columns, with integral sintered disc and screw type PTFE key Rota flow stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.106.1 15 10 303.106.2 20 15 303.106.3 30 15 303.106.4 40 20 303.106.5 40 30 303.106.6 50 30 303.106.7 50 40 303.106.8 60 40 303.106.9 100 40

104 [email protected] I www.pinnaclescientific.com CHROMATOGRAPHIC APPARATUS

Chromatography Columns, with integral sintered disc and PTFE key stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.107.1 15 10 303.107.2 30 10 303.107.3 30 20 303.107.4 45 20 303.107.5 45 30 303.107.6 60 30

Chromatography Absorption Columns, Plain without Stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.108.1 20 10 303.108.2 30 15 303.108.3 50 20 303.108.4 60 25 303.108.5 60 40 303.108.6 100 50 303.108.7 115 100 303.108.8 180 100

Chromatography Columns, Plain with stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.109.1 20 10 303.109.2 30 15 303.109.3 50 20 303.109.4 60 25 303.109.5 60 40 303.109.6 100 50 303.109.7 115 100 303.109.8 180 100

Chromatography Columns, Plain with screw type PTFE key Rota flow stopcock

Cat. No. Effective Disc dia. Length cm. mm. 303.110.1 20 10 303.110.2 30 15 303.110.3 50 20 303.110.4 60 25 303.110.5 60 40 303.110.6 100 50 303.110.7 100 60 303.110.8 115 100 [email protected] I www.pinnaclescientific.com 105 CHROMATOGRAPHIC APPARATUS

Chromatography Columns, Plain with PTFE key stopcock Cat. No. Effective Disc dia. Length cm. mm. 303.111.1 15 10 303.111.2 30 10 303.111.3 30 20 303.111.4 45 20 303.111.5 45 30 303.111.6 60 30 303.111.7 100 40 303.111.8 115 100

Chromatography Columns, with integral sintered disc, stopcock, socket and cone

Cat. No. Bore Effective Socket Cone mm. Length mm. 303.112.1 10 100 B14 B19 303.112.2 10 200 B14 B19 303.112.3 10 300 B14 B19 303.112.4 18 300 B24 B19 303.112.5 18 400 B24 B19 303.112.6 30 400 B24 B24

Chromatography Columns, with integral sintered disc, stopcock, socket and cone

Cat. No. Bore Effective Socket Cone mm. Length mm. 303.113.1 18 200 B14 B19 303.113.2 18 300 B14 B19 303.113.3 18 400 B14 B19 Note: Any other size of Chromatography Columns can also be supplied on Request.

Gas tight Micro Liter Syringe, (GMS) Fixed Needle

Cat. No. Capacity ml. 303.114.1 10 µl 303.114.2 25 µl 303.114.3 50 µl 303.114.4 100 µl 303.114.5 250 µl 303.114.6 500 µl 303.114.7 1000 µl

106 [email protected] I www.pinnaclescientific.com CHROMATOGRAPHIC APPARATUS

Gas tight Micro Liter Syringe, (GMS) Removable Needle

Cat. No. Capacity ml. 303.115.1 RN 10 ml. 303.115.2 RN 25 ml. 303.115.3 RN 50 ml. 303.115.4 RN 100 ml. 303.115.5 RN 250 ml. 303.115.6 RN 500 ml. 303.115.7 RN 1000 ml.

Plain Silicon Septa

Cat. No. Capacity ml. 303.116.1 FN 10 µl 303.116.2 PS 6.00 303.116.3 PS 7.00 303.116.4 PS 7.50 303.116.5 PS 8.00 303.116.6 PS 9.00 303.116.7 PS 9.50 303.116.8 PS 10.00 303.116.9 PS 11.00 303.116.10 PS 11.50 303.116.11 PS 12.00 303.116.12 PS 12.70 303.116.13 PS 14.00 303.116.14 PS 15.00 303.116.15 PS 16.00 303.116.16 PS 17.00 303.116.17 PS 18.00 303.116.18 PS 19.00 303.116.19 PS 20.00 303.116.20 PS 21.00 303.116.21 PS 28.00 303.116.22 PS 42.00

[email protected] I www.pinnaclescientific.com 107 CHROMATOGRAPHIC APPARATUS

PTFE, Silicon Bonded Septa Cat. No. Capacity ml. 303.117.1 BS 6 303.117.2 BS 7 303.117.3 BS 7.50 303.117.4 BS 8 303.117.5 BS 9 303.117.6 BS 9.50 303.117.7 BS 10 303.117.8 BS 11 303.117.9 BS 11.50 303.117.10 BS 12 303.117.11 BS 12.70 303.117.12 BS 14 303.117.13 BS 15 303.117.14 BS 16 303.117.15 BS 17 303.117.16 BS 18 303.117.17 BS 19 303.117.18 BS 20 303.117.19 BS 21 303.117.20 BS 28 303.117.21 BS 42

Chromatography Vials, Crimp Neck, made from clear glass tubing w/o cap & seals

Cat. No. Volume Size ml. mm. 303.118.1 PCN 1 8×40 303.118.2 PCN 1.5 12×32 303.118.3 PCN 4 15×45 303.118.4 PCN 6 23×40 303.118.5 PCN 10 23×46 303.118.6 PCN 20 23×75

Chromatography Vials, Crimp Neck, made from Amber glass tubing w/o cap & seals

Cat. No. Volume Size ml. mm. 303.119.1 ACN 1 8×40 303.119.2 ACN 1.5 12×32 303.119.3 ACN 4 15×45 303.119.4 ACN 6 23×40 303.119.5 ACN 10 23×46 303.119.6 ACN 20 23×75

108 [email protected] I www.pinnaclescientific.com CHROMATOGRAPHIC APPARATUS

Chromatography Vials, Screw Neck, made from clear glass tubing w/o cap & seals

Cat. No. Volume Size mm. 303.120.1 PSN 1.0 ml. 8×40 303.120.2 PSN 1.5 ml. 12×32 303.120.3 PSN 4.0 ml. 15×45 303.120.4 PSN 6.0 ml. 23×40 303.120.5 PSN 10.0 ml. 23×46 303.120.6 PSN 20.0 ml. 23×75

Chromatography Vials, Screw Neck, made from Amber glass tubing w/o cap & seals

Cat. No. Cap. Size mm. 303.121.1 ASN 1.0 ml. 8×40 303.121.2 ASN 1.5 ml. 12×32 303.121.3 ASN 4.0 ml. 15×45 303.121.4 ASN 6.0 ml. 23×40 303.121.5 ASN 10.0 ml. 23×46 303.121.6 ASN 20.0 ml. 23×75

Aluminum Caps for Chromatography vials crimp neck

Cat. No. Volume Size mm. 303.122.1 CCN 1.0 ml. 8.00mm 303.122.2 CCN 1.5 ml. 9.50mm 303.122.3 CCN 4.0 ml. 11.00mm 303.122.4 CCN 6.0 ml. 13.00mm 303.122.5 CCN 10.0 ml. 15.00mm 303.122.6 CCN 20.0 ml. 20.00mm

[email protected] I www.pinnaclescientific.com 109 CHROMATOGRAPHIC APPARATUS

Caps for Chromatography vials Screw neck

Cat. No. for vial of Dia cap 303.123.1 CSN 1.0 ml. 8.00mm 303.123.2 CSN 1.5 ml. 9.50mm 303.123.3 CSN 4.0 ml. 11.00mm 303.123.4 CSN 6.0 ml. 13.00mm 303.123.5 CSN 10.0 ml. 15.00mm 303.123.6 CSN 20.0 ml. 20.00mm 303.123.7 CSN 20.0 ml.

Seals for Chromatography Vials, PTFE 0.20mm. thick

Cat. No. Dia mm. 303.124.1 PTF 08.00 303.124.2 PTF 09.50 303.124.3 PTF 11.00 303.124.4 PTF 13.00 303.124.5 PTF 15.00 303.124.6 PTF 20.00

Seals for Chromatography Vials, Silicon 1.00mm. thick

Cat. No. Dia mm. 303.125.1 SIL 08.00 303.125.2 SIL 09.50 303.125.3 SIL 11.00 303.125.4 SIL 13.00 303.125.5 SIL 15.00 303.125.6 SIL 20.00

Seals for Chromatography Vials, Silicon/ PTFE bonded

Cat. No. Dia mm. 303.126.1 BON 08.00 303.126.2 BON 09.50 303.126.3 BON 11.00 303.126.4 BON 13.00 303.126.5 BON 15.00 303.126.6 BON 20.00

110 [email protected] I www.pinnaclescientific.com CHROMATOGRAPHIC APPARATUS / MOISTURE DETERMINATION APP.

Crimping Tools for Vial seals

Cat. No. Size 303.127.1 CT 11 303.127.2 CT 13 303.127.3 CT 20 303.127.4 CT 22 303.127.5 CT 38

MOISTURE DETERMINATION APPARATUS

Moisture Determination Apparatus, Dean & Stark, with stopcock

Cat. No. Cap. of Receiver Cap. of R.B. with stopcock Flask ml. 400.100.1 2 ml. 250 400.100.2 5 ml. 500 400.100.3 10 ml. 1000 400.100.4 25 ml. 1000

Moisture Determination Apparatus, Dean & Stark

Cat. No. Cap of Receiver Cap of R.B without stopcock flask ml. 400.101.1 2 ml. 250 400.101.2 5 ml. 500 400.101.3 10 ml. 1000 400.101.4 25 ml. 1000

[email protected] I www.pinnaclescientific.com 111 MOISTURE DETERMINATION APP.

Spare receiver for Dean and Stark with stopcock, cap. 2, 5, 10 or 25 ml.

Cat. No. Description 400.102.1 as above 400.103.1 without stopcock

Soil moisture gauge, For rapid determination of soil moisture content. The device takes less than 5 minutes, simple, inexpensive, suitable for field use. Highly useful in irrigation and compaction control programs Cat. No. Description 400.104.1 as above

ESSENTIAL OIL DETERMINATION APPARATUS

Essential oil Determination Apparatus, (Clevenger Type), Vertical tube combined with condenser and measuring tube with stopcock. A return tube for the aqueous parts of the distillate connects to bottom of the measuring t u b e and the vertical tube.

Cat. No. Disc dia mm. 401.100.1 1000 401.100.2 2000 401.100.3 3000 401.100.4 5000 401.100.5 10000 401.100.6 20000

Clevenger Apparatus, for determination of volatile oil lighter than water, comprising of 1000 ml. flask, oil saperatory tube and condenser Cat. No. Description 401.101.1 as above

Clevenger Apparatus, for determination of volatile oil heavier than water, comprising of 1000ml. flask, oil separatory tube and condenser

Cat. No. Description

401.102.1 as above

112 [email protected] I www.pinnaclescientific.com NITROGEN DETERMINATION APPARATUS

NITROGEN DETERMINATION APPARATUS Macro Kjeldahl Distillation, Comprising of 500ml. Kjeldahl multiple adapter, dropping funnel with plug, splash head, condenser and receiver adapter. Cat. No. Description 450.100.1 as above

Macro Kjeldahl Distillation, Comprising of similar parts as per Cat. No. 200.118, but with spherical joints in between splash head and condenser but without receiver adapter. Cat. No. Description 450.101.1 as above

Macro Nitrogen Determination, (Leurquin Apparatus), Ammonia is entertained in a steam of air which may be drawn through the tubes using an ordinary filter pump, digestion an distillation can be carried out in the same test tube and a number of determination can be carried out simultaneously. Alkalisation unit, comprising of absorption head with Plug, aeration head and 2 test tubes. Cat. No. Description 450.102.1 as above

Semi Micro Kjeldahl Apparatus

Cat. No. Description

450.103.1 Comprising of 50ml. B24 Flask, Distillation head with funnel, B24 cone funnel plug and condenser. 450.103.2 Comprising of parts of 450.103.1 apparatus but with flask capacity of 100ml. 450.103.3 Comprising of parts of 450.103.1 apparatus but with conical joints instead of spherical joints. 450.103.4 Comprising of parts 450.103.1 apparatus but with conical joints instead of Spherical joints.

[email protected] I www.pinnaclescientific.com 113 SPARE PARTS

Micro Kjeldahl Nitrogen Distillation Apparatus, (Pregl’s Parans and Wagner Apparatus ) Comprising of steam generation flask, steam trap, Vacuum jacketed flask with funnel, condenser tube of silver and receiving flask, complete with heavy duty stand, brass clamps but without burner. Cat.No. Description

450.104.1 — do — with 1000 ml. steam generating flask. 450.104.2 —do — with 2000 ml stem generating flask. 450.104.3 — do glass tube condenser and 1000ml. steam generating flask 450.104.4 — do with glass tube condenser and 2000 ml. steam generating flask.

SPARE PARTS

Spare Silver Tube Cat. No. Description 500.100.1 for Cat. No. 450.104.1 & 450.104.2

Spare Vacuum Cat. No. Description 500.101.1 for Cat. No. 450.104

Parnas and Wagner Apparatus, for distillation of Ammonia for Kjeldahl digestion has been adopted to incorporate ground glass joints. Comprising of steam generating flask, stem trap vacuum jacket, funnel plug Liebig condenser 200 mm., joint clip S-13 and S-19 with stand clamps. Cat. No. Description 500.102.1 as above

Markham Semi Micro Distillation Unit,

Cat. No Description 500.103.1 Comprising of Markham still with enclosed evaporator vessel in combined steam jacket and trap, funnel plug, condenser and Spherical joint clip 500.103.2 Comprising Similar parts but with conical joints and receiver adapter

114 [email protected] I www.pinnaclescientific.com STOPCOCKS

Nitrogen Distillation Apparatus, (Kemmerer, Hellel Apparatus) Micro

Cat. No Description 500.104.1 Double stage for distillation of two samples

500.104.2 Single stage for distillation of one sample

Kjeldahl Absorption Traps

Cat. No Description

500.105.1 Comprising of Kjeldahl flask 500 ml. lower chamber 250 ml. and upper chamber with sintered disc. 500.105.2 Comprising similar parts but upper chamber without sintered disc.

STOPCOCKS Stopcocks, Straight Bore

Cat. No. Description

501.100.1 With Borosilicate Solid Plug. side Tube 501.100.2 With Borosilicate Solid Plug Side Capillary

Stopcock , Oblique Bore

Cat. No. Description 501.101.1 With Borosilicate Solid Plug. side Tube 501.101.2 With Borosilicate Solid Plug. Side Capillary

Stopcock, three way, T Bore

Cat. No. Description

501.102.1 With Borosilicate Solid Plug side Tube 501.102.2 With Borosilicate Solid Plug Side Capillary

[email protected] I www.pinnaclescientific.com 115 Stopcock, three way, Double Oblique Bore

Cat. No. Description

501.103.1 With Borosilicate Solid Plug side Tube 501.103.2 With Borosilicate Solid Plug Side Capillary

Stopcock, three way, with Twin Bore with solid plug

Cat.No. Description 501.104.1 With side Tube 501.104.2 With Side Capillary

Stopcock for Vertical drip Cat. No. Description 501.105.1 as above

Stopcock for Burette

Cat. No. Description 501.106.1 With Solid Borosilicate Plug 501.106.2 With Hollow Borosilicate Plug 501.106.3 With PTFE Plug 501.106.4 Rota flow PTFE key Screw type

Stopcock, C Bore

Cat. No. Description 501.107.1 With Borosilicate Solid Plug Side Tube 501.107.2 With Borosilicate Solid Plug Side Capillary

Stopcock, for Separating Funnels

Cat. No. Bore mm. 501.108.1 2 501.108.2 4 501.108.3 6 501.108.4 8 501.108.5 10 501.108.6 12

116 [email protected] I www.pinnaclescientific.com Stopcock, For Aspirator 4 mm. Bore

Cat. No. Description 501.109.1 Plain 501.109.2 With B24 Cone 501.109.3 With B29 Cone

Stopcock for Kipp’s Apparatus, Bent

Cat. No. Description 501.110 as above

SCREW TYPE PTFE KEY STOPCOCK Stopcock, screw Type key with Two Plain limbs

Cat. No. Limbs O.D. mm. 502.100.1 8 502.100.2 10 502.100.3 12 502.100.4 15

Stopcock, Screw Type, PTFE key with two limbs Capillary Bore 2 mm.

Cat. No. 502.101.1

Stopcock, Screw Type, PTFE key, with Two Plain Limbs at Right Angle

Cat. No. Limbs O.D. mm. 502.102.1 8 502.102.2 10 502.102.3 12 502.102.4 15

Stopcock , Screw Type, PTFE key with two limbs at Right Angle, Capillary Bore 2 mm. Cat. No. Description 502.103.1 as above

[email protected] I www.pinnaclescientific.com 117 PTFE (TEFLON) KEY STOPCOCKS

PTFE (TEFLON) KEY STOPCOCKS Stopcock, Straight Bore with PTFE Key Cat. No. Key Bore mm. 503.100.1 1 503.100.2 2 503.100.3 3 503.100.4 4 503.100.5 6

Stopcock, for Burette, Straight Bore, with PTFE key Cat. No. Description 503.101.1 as above

Stopcock, for Burette, Double Oblique bore with PTFE key Cat. No. Description 503.102.1 as above

Stopcock, for Separating Funnel, with PTFE key

Cat. No. Bore mm.

503.103.1 2 503.103.2 4 503.103.3 6 503.103.4 8

Stopcock, Oblique Bore, with PTFE key Cat. No. Key Bore mm. 503.104.1 2 503.104.2 4 503.104.3 6

Stopcock, T or Y Bore, with PTFE key Cat. No. Key Bore mm. 503.105.1 2 503.105.2 4 503.105.3 6

118 [email protected] I www.pinnaclescientific.com HIGH VACUUM STOPCOCKS

HIGH VACUUM STOPCOCKS Stopcock, Straight Bore with hollow plug, High Vacuum

Cat. No. Plug Bore mm. 600.100.1 2 600.100.2 4 600.100.3 6 600.100.4 8 600.100.5 10 600.100.6 12 600.100.7 15

Stopcock, Single Oblique Bore, with hollow plug, High Vacuum

Cat. No. Plug Bore mm. 600.101.1 2 600.101.2 4 600.101.3 6 600.101.4 8

Stopcock, Three Way, Double Oblique Bore, High vacuum

Cat. No. Plug Bore mm. 600.102.1 2 600.102.2 4 600.102.3 6

Stopcock, T or Y Type, Hollow Plug, High Vacuum

Cat. No. Plug Bore mm. 600.103.1 2 600.103.2 4 600.103.3 6 600.103.4 8

[email protected] I www.pinnaclescientific.com 119 HIGH VACUUM STOPCOCKS

Stopcock, L Type, Lower Limb bent at Right Angle, Hollow Plug, High Vacuum.

Cat. No. Plug Bore mm. 600.104.1 2 600.104.2 4 600.104.3 6 600.104.4 8 600.104.5 10

Stopcock, L Type, Vertical, Hollow Plug, High Vacuum,

Cat.No. Plug Bore mm. 600.105.1 2 600.105.2 4 600.105.3 6 600.105.4 8 600.105.5 10

Stopcock, L Type, Two Limbs with Mercury Cup, Lower Limb, Vertical, Hallow Plug, High Vacuum.

Cat. No. Plug Bore mm. 600.106.1 2 600.106.2 4 600.106.3 6 600.106.4 8 600.106.5 10

Stopcock, L Type, Three Limbs, Hollow Plug, High Vacuum.

Cat. No. Plug Bore mm. 600.107.1 2 600.107.2 4 600.107.3 6

Stopcock, Mercury cup, Two Limb, Hollow Plug, High Vacuum

Cat. No. Plug Bore mm. 600.108.1 2 600.108.2 4

120 [email protected] I www.pinnaclescientific.com HIGH VACUUM STOPCOCKS / THERMOMETER

Stopcock, Mercury Cup, Three Limb , Hollow Plug, High Vacuum

Cat. No. Plug Bore mm. 600.109.1 2 600.109.2 4

Chemical thermometers, Mercury Filled 30 cm. long, accuracy ± 1 division.

Cat. No. Range Division

601.100.1 0-500 C 1/1 601.100.2 0-500 C 1/2 601.100.3 0-1000C 1/1 601.100.4 -10-1000C 1/2 601.100.5 -10-1100C 1/1 601.100.6 0-2000C 1/1 601.100.7 0-2500C 1/1 601.100.8 0-3000C 2/1 601.100.9 0-3600C 2/1 601.100.10 0-2200F 1/1 601.100.11 0-800R 1/1

(Note: Up to 1100 C Alcohol filled Thermometers can also be supplied on same rates.)

Adjustable PTFE cone B10 or B14 or B19 for holding Thermometers of Cat. No. Cat. No. Description 601.101.1 as above

Precision Chemical Thermometers, Accuracy ± 1 division.

Cat. No. Range Division

601.102.1 0-500C 1/5 601.102.2 0-500C 1/10 601.102.3 -5-1100C 1/5 601.102.5 -5-1100C 1/10

Thermometers, with cone, enclosed Type, Accuracy ± 1 division.

Cat. No. Range Cone 601.103.1 0-500C B10 601.103.2 -10-110C B14 601.103.3 0-2500C B14 601.103.4 0-360C B14 601.103.5 -10-1100C B19 601.103.6 0-2500C B19 601.103.7 0-3600C B19 [email protected] I www.pinnaclescientific.com 121 THERMOMETER

Immersion Thermometers, Mercury in glass engraved on stem, Accuracy ±1division.

Cat. No. Range Immersion Total length cms. length cms. 601.104.1 110C 15 45 601.104.2 250C 15 45 601.104.3 360 C 15 45 601.104.4 110/C 30 60 601.104.5 250C 30 60 601.104.6 360C 30 60 601.104.7 110/C 60 90 601.104.8 250C 60 90 601.104.9 360C 60 90

Low Temperature Thermometer, (Alcohol Filled), 30cms.long. Accuracy ± 1 division

Cat. No. Range Division 601.105.1 -30 to + 300C 10C 601.105.2 -50 to + 500C 10C 601.105.3 -50 to + 1000C 10C 601.105.4 -100 to + 500C 10C

Oven/Incubator Thermometers, L shaped size 200 mm. x 200mm. mercury in glass. Accuracy ± 1division

Cat. No. Range Division 601.106.1 1100C 10C 601.106.2 2500C 20C 601.106.3 3600C 20C

Straight Industrial Thermometers, Mercury in glass, engraved on stem, Accuracy ± 1 division

Cat. No. Range Immersion Total length cms. length cms. 601.107.1 85C 10 30 601.107.2 110C 10 30 601.107.3 250C 10 30 601.107.4 360C 20 40 601.107.5 110C 50 75 601.107.6 250C 50 75 601.107.7 360C 70 90

122 [email protected] I www.pinnaclescientific.com THERMOMETER

Maximum and Minimum Thermometer Cat. No. Description 601.108.1 as above

Wet and Dry Thermometer Cat. No. Description 601.109.1 as above

Wall thermometer, Aluminum scale Cat. No. Description 601.110.1 as above

Wall Thermometer Cat. No. Description 601.111.1 half meter long 601.112.1 one meter long

Clinical Thermometer Cat. No. Description 601.113.1 as above

Brewer’s Thermometer, (Bath Thermometer), Copper case.

Cat. No. Range 601.114.1 0 to 1100C 601.114.2 0 to 1500C 601.114.3 0 to 2400F 601.114.4 0 to 3000F

Brewer’s Thermometer, (Bath Thermometer), Copper case, Combined scale, Range 0 to 1500C and 3000F. Cat. No. Description 601.115.1 as above

[email protected] I www.pinnaclescientific.com 123 THERMOMETER

Soil Thermometer, with brass cone at bottom, fitted in wooden body, range 1000C or 1800F, 50 mm. long, brass cone Cat. No. Description 601.116.1 as above 601.117.1 100 mm. long, brass cone

Diary Thermometer, with paper scale, range 0 to 100x10C, total length 280 mm. approx, filled with mercury Cat. No. Description 601.118.1 as above

Psychrometer, (Whirring Hygrometer), in wooden frame, with chart Cat. No. Description 601.119.1 as above 601.120.1 in velvet lined box

Bi-Metal Dial Thermometer, Stem length 30cm., stem at back, made of brass

Cat. No. Range Dial dia. mm. 601.121.1 0-1000C 65 601.121.2 0-1500C 65 601.121.3 0-2000C 65 601.121.4 0-2500C 65 601.121.5 0-3000C 65 601.121.6 0-3500C 65 601.121.7 0-1000C 100 601.121.8 0-1500C 100 601.121.9 0-2000C 100 601.121.10 0-2500C 100 601.121.11 0-3000C 100 601.121.12 0-3500C 100

124 [email protected] I www.pinnaclescientific.com 1000.001.1 BEAKERS

Beakers, moulded in Polypropylene, have excellent clarity and very good chemical resistance. These autoclavablc Beakers have prominently raised graduations on the outer surface. Pouring a solution becomes very convenient because of its tapered spout. Available in 50 Ml, 100ml, 250 ml, 500 ml 1000 ml & 2000 ml

1000.002.1 BUCHNER FUNNEL

Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vacuum seal which does not require greasing. The base of the top portion has a perforated filter plate. Material: Polypropylene Available in 70mm, 110mm

1000.003.1 CARBOY WITH STOP COCK

Adding in line of Aspirator, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and arc used for storing & dispensing distilled water & other laboratory solutions. Material: Polypropylene Capacity: 10 ltr., 20 ltr.

1000.004.1 WASH BOTTLES

Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by squeezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required. Material: Polyethylene Capacity: 125ml, 250ml, 500ml, 1000ml

1000.005.1 CENTRIFUGE TUBE CONICAL BOTTOM

Centrifuge tubes with conical bottom are available in two sizes i.e. 15 ml & 50 ml Moulded in Polypropylene, these tubes are clear, strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces up to 7500xG & 12000xG for 15 ml & 50 ml tubes respectively. These tubes are available sterilized as well as non sterilized. Material: Polypropylene 15 ml, 50 ml, 15 ml - Sterile, 50 ml - Sterile

[email protected] I www.pinnaclescientific.com 125 1000.006.1 CENTRIFUGE TUBE ROUND BOTTOM

Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate These tubes have excellent clarity and are strong enough to be used upto 50,000xG. These tubes can be autoclaved, however, repeated autoclaving in PC tubes reduces their mechanical strength. Material: Polypropylene / Polycarbonate

1000.007.1 CONICAL FLASK

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leak proof. Threads should be disengaged before autoclaving. Material: Polypropylene Capacity: 100ml, 250ml, 500ml

1000.008.1 CONICAL MEASURES

These Conical Measures are very good for measuring small quantities of reagents. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The Measures are clear, have good chemical resistance and have raised graduations for easy visibility. Material: Polypropylene Available in Capacity: 12 ml, 25ml, 50ml, 125ml, 200ml

1000.009.1 CONNECTORS (T & Y)

Made of polypropylene, these Connectors are basically pipe-like structures in T&Y shapes with ringed edges. These are used for connecting tubes to each other. The ringed edged prevent leakage & Slippage. Material: Polypropylene

1000.010.1 DESICCATOR (PLAIN)

Plain Desiccators are physically the same as Vacuum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Material: Polypropylene Size (mm): 150, 200, 250, 300

126 [email protected] I www.pinnaclescientific.com 1000.011.1 KIPP’S APPARATUS

Kjpp’s Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphide in the base of the Apparatus. H, S gas then evolved collects in the middle dome from where it can be released through a leak proof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning. Material: High Density Polyethylene Available in 250ml, 500ml, 1000ml

1000.012.1 LABORATORY TRAY

Needless to say, Laboratory Tray molded in polypropylene is a multipurpose tray that can be used for sterilizing, drying glassware, porcelain ware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting. Material: Polypropylene Available in: 450 x 350 x 75 mm 375 x 300 x 75 mm

1000.013.1 MEASURING CYLINDER HEXAGONAL

Measuring cylinders are now available with hexagonal base also. The hexagonal base provides excellent stability to the cylinder where as the tapered spout works really well while pouring any reagent. Material: Polypropylene Available in Capacity: 10 ml, 25ml, 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml

1000.014.1 MEASURING CYLINDERS

Measuring Cylinders, moulded in Polypropylene & TPX, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability. Material: Polypropylene Available in Capacity: 10 ml, 25ml, 50ml, 100ml, 250ml, 500ml, 1000ml, 2000ml.

[email protected] I www.pinnaclescientific.com 127 1000.015.1 FLOAT RACK

This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water baths. Easy to load, these are essential in microbiology & immunology labs. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting. Material: Polypropylene Available in 16 MCTs of 1.5 ml

1000.016.1 FUNNEL HOLDER

Made of Polypropylene, these corrosion free Funnel Holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure firm grip on Rods having dia 1 /2" or 3/8". Material: Polypropylene

1000.017.1 FUNNELS -LONG STEM

These long stem funnels have smooth walls, 60" cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved. Material: Polypropylene Available in 50mm, 62mm, 75mm, 100mm, 150mm

1000.018.1 HEAVY DUTY VACUUM BOTTLE

This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vacuum. Material: Polypropylene Capacity: 2000ml

1000.019.1 WIDE MOUTH SQUARE BOTTLES

This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The built in depressions on two sides provide excellent grip while holding this bottle. Material: Polypropylene Capacity: 4000ml

128 [email protected] I www.pinnaclescientific.com 1000.020.1 DESICCATOR VACUUM

Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vacuum desiccators can hold vacuum upto 740 mm of for 24 hrs. without any greasing. Material: Polypropylene/ Polycarbonate Size (mm) Flange OD (mm) L.D. (mm) 150 171 150 200 232 199 250 276 240 300 340 300

1000.021.1 DRAINING BASKET

As the name suggests, this basket with wide-net like structure on all sides prove really useful for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved. Material: Polypropylene Available in: 400 x 400 x 100 mm

1000.022.11 DROPPING BOTTLES

Blown in Low Density Polyethylene, Dropping Bottles dispense small uniform drops of liquids when pressed lightly. Material: Low Density Polyethylene Available in: 60 ml, 125 ml

1000.023.1 FISHER CLAMP

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1 /2"or 3/8". Material: Polypropyletie Available in Single and Double Type

1000.024.1 FLASK STAND

Moulded in Polypropylene, this Flask Stand gives a stair-like top view. Every step provides excellent support to the round bottom flask at every point of Contact. This Flask Stand can hold round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam autoclaved. Material: Polypropylene [email protected] I www.pinnaclescientific.com 129 1000.025.1 MEASURING JUGS

These handy Jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs arc provided with a handle for easy & convenient lifting and have raised graduations for easy reading. Material: Polypropylene Available in Capacity: 250ml, 500ml, 1000ml, 2000ml

1000.026.1 NARROW MOUTH BOTTLE

This autoclavable bottle, made of polypropylene, can be used for storing & transferring chemicals and other reagents safe & sound. Material: Polypropylene Capacity: 4000ml

1000.027.1 PETRI DISH

These Polypropylene Petri Dishes are clear, unbreakable & autoclavable. Material: Polpropylene Available in 50mm, 75mm, 100mm, 125mm, 150mm

1000.028.1 PETRI DISH (CULTURE)

Newly added PS Petri Dish with fitting proves excellent for culture exp. Made in polystyrene, this transparent Petri Dish provides excellent inside view.

1000.029.1 PETRI DISH (DISPOSABLE)

These transparent, ready to use, disposable Petri Dishes are made of optically clear, non-toxic, Polystyrene. These Petri Dishes packed individually in polyethylene bags are sterilized by radiation. Material: Polystyrene Available in: 90 mm Radiation Stz. 60 mm Radiation Stz. 35 mm Radiation Stz.

130 [email protected] I www.pinnaclescientific.com 1000.030.1 REAGENT RESERVOIR

Moulded in Polypropylene, this autoclavable Reagent Reservoir is helpful for multi- channel pipettes to be used into microtiterplates. Material: Polypropylene Available in: 75 ml

1000.031.1 RETORT STAND

These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5 mm 750 mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand. Material: Polystyrene/Polypropylene Avaialbale in: 225 x 150 mm Side Hole 300 x 200 mm Centre Hole 300 x 200 mm Side Hole

1000.032.1 RIA VIAL

These Polypropylene/Polystyrene tubes are generally used in RIA, Coagulation & Bacteriology. The Polypropylene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies & solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvents. Material: Polypropylene Polystyrene Available in: 12 x 75 mm / PS. 12 x 75 mm / PP. Cap for 12 mm RIA Tube

1000.033.1 SEPERATORY FUNNEL

Seperatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable separating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel Available in Capacity: 100ml, 250ml, 500ml

[email protected] I www.pinnaclescientific.com 131 1000.034.1 RACK FOR MICRO CENTRIFUGE (FOLDING)

These can be used dry, in water baths or in freezers. These racks arc provided with alpha numeric index for easy sample identification. Racks arc stack able even which loaded and have purpose designed label spaces on each side. Material: Polypropylene 100 Places for 1.5 ml MCTs

1000.035.1 RACK FOR MICRO CENTRIFUGE TUBE

Moulded in Poly carbonate, these autoclavable racks are made for holding 1.5 ml micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification. Material: Polycarbonate Available in 24, 48 Tubes

1000.036.1 RACK FOR PETRI DISHES

These Racks are clear acrylic construction with polycarbonate posts. 69101 has a capacity to hold 60 petri dishes of 90 mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation. Material : Polymetbyl Metbacrylate / Polycarbonate Rack for 90 mm Petri Dishes Rack for 60 mm Petri Dishes

1000.0376.1 REAGENT BOTTLES (NARROW MOUNT)

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP bottles are rigid, translucent and have excellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have excellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof. Material: Low Density Polyethylene & Polypropylene Available in 60ml, 125ml, 250ml, 500ml, 1000ml

1000.038.1 REAGENT BOTTLES (WIDE MOUTH)

Same as above but in Wide Mouth. Available in 60ml, 125ml, 250ml, 500ml, 1000ml

132 [email protected] I www.pinnaclescientific.com 1000.039.1 PIPETTE PUMP

This pipette pump is fast release pipetting device for precise pipetting zip quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quii emptying. The moulded chuck has a silicon rubber collet inside to hold various pipettes of standard sizes. It resists acids & alkalies and can 1 easily disassembled for thorough cleaning. Material: Acrylonitrile Butadiene Styrene Available in: 2 m, 10 ml, 25 ml

1000.040.1 PIPETTE STAND (HORIZONTAL)

This detachable Stand can hold 12 pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembled for space saving storage. Material: Polypropylene Available For 12 Pipettes

1000.041.1 PIPETTE STAND (VERTICAL)

This is a stable, non-corrosive, detachable Stand which can hold 28-pipettes with maximum dia 14 mm. The heavy base measures 225 mm in diameter and a Polypropylene coated square rod measuring 375 mm in length is screwed into the base. Available For 28 Pipettes

1000.042.1 PLANTATION POTS

Plantation Pots, moulded in polypropylene, are available in four different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose. Material: Polypropylene Available in: 100 mm, 150 mm, 200 mm, 250 mm

1000.043.1 POLICEMEN STIRRING RODS

This, infact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas. Material : Polypropylene Available in: -6 mm x h - 245 mm [email protected] I www.pinnaclescientific.com 133 1000.044.1 TEST TUBE BASKETS

Test Tube” Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test rubes or culture tubes during sterlization or incubation. Material: Polypropylene Available in: 140 x 120 x 110 mm 160 x 160 x 160 mm e 1000.045.1 TEST TUBE CAP l This transparent polypropylene cap tor Test Tubes proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer grooves would hold identification labels. The built in seal ring would set in the tube making the combination a leakproof one. Material: Polypropylene Cap for Test Tube 0.25 mm p 1000.046.1 TEST TUBE STAND

This autoclavable Stand is perhaps the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the Material: Polypropylene 16 mm & 25 mm Tubes 25 mm Tubes m 1000.047.1 TEST TUBE STAND ROUND

A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25 mm dia holes & eight 19 mm dia holes in its top plate. The base has matching hemispherical wells & 16 vertical pins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose. aMaterial: Polypropylene Available in 19 mm & 25 mm Tubes

1000.048.1 TEST TUBE WITH SCREW CAP s These polypropylene tubes provide excellent option for RIA, coagulation & bacteriology etc. The cap in screwed on to the tube & hence this tube can be filled up to the brim. Material: Polypropylene Size: 16 x 100 mm Ext. Thread

134 [email protected] I www.pinnaclescientific.com 1000.049.1 SLIDE BOX

These Slide Boxes are durable, compact & provide utmost protection to I”x3" slides. Heavy walls will not warp, splinter or crack. Boxes are unaffected by humidity and are thoroughly insect proof. Base of the Material: Polystyrene Available with 25, 50, 100 Slides

1000.050.1 SLIDE STORAGE RACK

Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through the numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. The transparent cover provide excellent view of the slides stored inside. Material: Acrylonitrile Butadiene Styrene Slides: 100 Slides

1000.051.1 SOFT LOOP STERILE

This non-toxic disposable loop is accurate to semi quantitative stand for handling samples. Material: Polystyrene Available in: Soft loops - 1 u Soft loops - 10 ul Inoculation Needle

1000.052.1 SPATULA

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers. Material: Polypropylene Available in Capacity: 100ml, 200ml

1000.053.1 SPECIMEN JAR (GAS JAR)

These transparent Specimen Jars, used for preserving different specimens in the lab are provided with a cap that fits in tight. These jars provided excellent protection to the species preserved in it. Material: Polystyrene

[email protected] I www.pinnaclescientific.com 135 1000.054.1 TEST TUBE STAND (3 TIER)

These ingenious racks with a 3-rier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These Racks can withstand sub-freezing temperatures. Material: Polypropylene

1000.055.1 UNIVERSAL MUTLI RACK

This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of the rack can be used for tubes of 30 mm, 20 mm, 17 mm & 12 mm. Material: Polypropylene

1000.056.1 URINE CONTAINER

These containers can be used for collecting a wide range of samples of sputum, urine etc.. Moulded in polypropylene these container have excellent contact clarity and the cap has built-in seal that makes it completely leakproof. Material: Polypropylene Available in capacities: 30 m, 60 ml

1000.057.1 UTILITY TRAY

Adding to the already existing range of autoclavable laboratories trays, is the Utility Trays and as the name suggests this Polypropylene Tray can be utilized (“or purposes ranging from drying glass ware to sterilizing and to store any laboratory apparatus. Material: Polypropylene Available in: 375 x 350 x 130 mm

1000.058.1 VOLUMETRIC FLASK

Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage. Material: Polypropylene Available in: 25 ml, 50 ml, 100 ml, 250 ml, 500 ml, 1000 ml

136 [email protected] I www.pinnaclescientific.com INDEX Absorber (for Kjeldahl Assembly) 92 Bottles, Weighing 2 Adapter, Perkin Intermediate Receiver 66 Bottles, Weighing, Cap Type 2 Adapter, Receiver, Multi-Limb Vacuum 66 Bottles, Weighing, Lunge’s 2 Adapter, Receiver, Sloping Delivery 66 Bottles, Wide Mouth 2 Adapter, Receiver, Vertical Delivery 66 Bottles, Wolf, with three standard joint necks 7 Adapters, Cone to Rubber Tubing 70 Brewer’s Thermometer 123 Adapters, Cone with stem 70 Buckner Filter 86 Adapters, Conical Spherical, with Clip 63 Buckner Funnel, with Sintered Disc 87 Adapters, Expansion 63 Burette with Double oblique Bore, PTFE 14 Adapters, Multiple, with Three Necks 64 Burette with Double oblique Bore, PTFE AMBER 14 Adapters, Multiple, with Two Necks 63 Burette with Double oblique Bore, screw type 13 Adapters, Multiple, with Two Necks, parallel 63 Burette with Double oblique Bore, screw type AMBER 14 Adapters, Receiver, Bent or straight with 65 Burette with Over Flow Cup, Double oblique Bore 14 vacuum connection Burette, Automatic Zero, mounted on Reservoir 16 Adapters, Receiver, Bent with Multiple Connection 65 Burette, Automatic Zero, mounted on Reservoir AMBER 17 Adapters, Receiver, Bent with Socket Connections 65 Burettes with Double Oblique Bore, Stopcock 3-Way 12 Adapters, Receiver, Bent with Vent 65 Burettes with Double Oblique Bore, Stopcock 3-Way 12 Adapters, Receiver, Plain Bend short/Long 64 Burettes with Double Oblique Bore, Stopcock 3-Way, Adapters, Receiver, Plain Bent 66 AMBER 12 Adapters, Reduction 62 Burettes with Straight bore, PTFE key Stopcock 11 Adapters, Socket to cone 71 Burettes, Micro, Automatic Filling Device 15 Adapters, Straight, Delivery, bent 64 Burettes, Pinch Cock with Nozzle and Rubber tubing 9 Adapters, Swan Neck 64 Burettes, Screw Type Rota flow Stopcock 10 Adjustable PTFE cone 121 Burettes, Screw Type Rota flow Stopcock AMBER 10 Air Leak tube/Gas Inlet tube 72 Burettes, Screw Type Rota flow Stopcock with PTFE 11 Air/Steam Inlet Tubes, Straight 72 Burettes, Straight Bore with Glass Key Stopcock 9 Alkoxyle and Alkylimino 96 Burettes, Straight Bore with Glass key Stopcock 9 Aluminum Caps for Chromatography vials 109 Burettes, Straight Bore with Glass Key Stopcock AMBER 9 Anti-Foaming Splash Head, Sloping 69 Burettes, Straight Bore with Glass key Stopcock, AMBER 10 Arm Flask 48 Calcium Chloride Towers 35 Beakers, Low form, with spout, graduated 1 Cap, fitted with hooks 62 Beakers, Micro, Low form with Spout 1 Caps for Chromatography vials Screw neck 110 Beakers, Tall form, with spout, graduated 1 CarbaryI Content Determination Apparatus 97 Bi-Metal Dial Thermometer 124 Cavett Blood Test Apparatus 97 Blood Sugar Tubes 35 Chemical Thermometers 121 Bottle, B.O.D., with interchangeable stopper 8 Chromatography absorption assembly 103 Bottles, Aspirator, (lavelline Bottle) 7 Chromatography Absorption Columns 105 Bottles, Aspirator, (lavelline Bottle) long form 7 Chromatography Apparatus 103 Bottles, Dropping, fitted with ground 6 Chromatography apparatus, semi micro 103 Bottles, Gas Washing 8 Chromatography Columns 104 Bottles, Mac-Cartney 7 Chromatography Columns, Plain 106 Bottles, Reagent 6 Chromatography Columns, Plain with screw type 105 Bottles, Reagent, AMBER 6 Chromatography Columns, Plain with stopcock 105 Bottles, Reagent, AMBER, Wide Mouth 5 Chromatography Columns, with integral sintered disc 106 Bottles, Reagent, Narrow Mouth 4 Chromatography Vials, Crimp Neck 108 Bottles, Reagent, Narrow Mouth 5 Chromatography Vials, Screw Neck 109 Bottles, Reagent, Narrow Mouth with interchangeable 4 Circulatory Cyclone Evaporator 97 Stopper Claisen Heads, Sloping 68 Bottles, Reagent, Wide Mouth, with interchangeable hollow Clevenger Apparatus 112 Stopper 5 Climbing Film Evaporator 96 Bottles, Roller, 51mm Short - Skirt screw Cap 6 Clinical Thermometer 123 Bottles, Roller, with indented growth 6 Condenser, Air, Plain 38 Bottles, Serum, with squat type standard neck 7 Condenser, Bulb Shape 43 Bottles, Specific Gravity 3 Condenser, Cold Finger 42 Bottles, Specific Gravity, Hubbard Conical 4 Condensers Plain 38 Bottles, Specific Gravity, Hubbard, Cylindrical 4 Condensers, Air 38 Bottles, Specific Gravity, weld, with Cap 4 Condensers, Air 43 Bottles, Specific Gravity, with Teflon stopper 3 Condensers, Allihn 41 Bottles, Wash 8 Condensers, Allihn, (Bulb Condenser) 42 Condensers, Coil 43 Flasks, Conical, with Teflon Rubber liner 57 Condensers, Coil, Graham 39 Flasks, Distillation, Pear Shaped 56 Condensers, Davies 40 Flasks, Distillation, with side tube 56 Condensers, Double Coil 40 Flasks, Erlenmeyer, conical wide mouth 59 Condensers, Ether 42 Flasks, Erlenmeyer’s, Conical, Graduated, Narrow Mouth58 Condensers, Friedrich 41 Flasks, Evaporating 54 Condensers, Inland Revenue 41 Flasks, Flat or Round Bottom 50 Condensers, Jacketed Coil 41 Flasks, Flat or Round Bottom, Three neck 52 Condensers, Leibig 42 Flasks, Flat or Round Bottom, Two neck 51 Condensers, Liebig 39 Flasks, Florentine 54 Condensers, Reversible Type 40 Flasks, Iodine, flaring, funnel Shaped Cup B24 57 Cones, Imhoff, Sediment, Blunt 29 Flasks, Kjeldahl 53 Cones, Imhoff, Sediment, Sharp 29 Flasks, Kjeldahl, Long neck 54 Cones, Plain End Double 61 Flasks, Kohlraush, (Mud Flask) 47 Cones, Plain End, Double 61 Flasks, Kohlraush, (Mud Flask) Class A 47 Cones, Plain End, Single 60 Flasks, Pear Shaped 54 Conical Filter, (Hirsch type) 88 Flasks, Pear Shaped, two necks 55 Conical Measure, Class ‘B’ 22 Flasks, Pear Shaped, Three necks 55 Continuous Water Distillation Assembly 95 Flasks, Saponification 48 Crimping Tools for Vial seals 111 Flasks, Saybolt, Viscosity 47 Crimping Tools for Vial seals 111 Flasks, Vigreaux, Classisen Type 55 Crow Receiver, Class ‘A 22 Flasks, Vigreaux, with side neck 55 Crow Receiver, Class ‘B’ 22 Flasks, Volumetric, (Measuring) 44 Cylinder, with single graduation mark 22 Flasks, Volumetric, (Measuring), AMBER 44 Cylinders, Measuring, AMBER 18 Flasks, Volumetric, (Measuring), AMBER with Plastic Cylinders, Measuring, AMBER 19 Stopper 45 Cylinders, Measuring, Graduated with pour out 20 Flasks, Volumetric, (Measuring), with Plastic Stopper 45 Cylinders, Measuring, Graduated, AMBER 20 Flasks, volumetric, (Measuring), with Screw cap 46 Cylinders, Measuring, Graduated, AMBER 20 Flasks, Volumetric, Sugar estimation 46 Cylinders, Measuring, with interchangeable Stopper 19 Fractionating Columns, Dufton 83 Cylinders, Measuring, with spout 18 Fractionating Columns, Pear Bulb 83 Cylinders, Measuring, with spout, Hexagonal 18 Fractionating Columns, Pear shaped bulbs 84 Cylinders, Nessler 22 Fractionating Columns, Plain designed 83 Cylinders, Nessler, Class ‘A 22 Fractionating Columns, Rod and Disc Pattern 84 Cylinders, Rain measure, Metric Scale 22 Fractionating Columns, Vigreaux 83 Desiccators, Vacuum 98 Fractionation Assembly 95 Desiccators, with ground cover 98 Freeze Drying Manifold 97 Diary Thermometer 124 Funnel filtering with Stem 76 Distillation Apparatus 89 Funnel, Connecting, Bent 92 Distillation Apparatus Ammonia 89 Funnel, Separating, open top 79 Distillation Apparatus, Vertical Type 95 Funnels, Plug Type, Capacity 50 ml. 80 Distillation Assemblies 92 Gas Evolution Assembly 93 Distillation Assembly, Consists of R.B. 91 Gas tight Micro Liter Syringe, (GMS) Fixed Needle 106 Distillation Tower 96 Gas tight Micro Liter Syringe, (GMS) Removable Needle107 Dropping Funnels, Cylindrical 79 Gooch Crucible 86 Drying Tube 71 Immersion Thermometers 122 Essential oil Determination Apparatus 112 Kjeldahl Absorption Traps 115 Filter Apparatus, Complete with filtering flask 85 Kjeldahl Distillation 92 Filtering Apparatus Witt’s, Complete 85 Kozellka and Hine, Blood Test Apparatus 97 Flask, conical rimless 58 Lids for Reaction Flasks 49 Flask, Erlenmeyer, conical, long neck 58 Low Temperature Thermometer 122 Flask, Lechatelier 48 Macro Kjeldahl Distillation 113 Flasks Reaction, wide mouth, 49 Macro Nitrogen Determination 113 Flasks, Boiling, Flat or Round Bottom 59 Markham Semi Micro Distillation Unit 114 Flasks, Buchner 53 Maximum and Minimum Thermometer 123 Flasks, Buckner, Filtration, Heavy, Bolt Neck 56 Mercury Distillation Assembly 96 Flasks, Cassia, with graduated 48 Mercury seal & Guide 75 Flasks, Clasin, Pear Shaped 56 Mercury Seal Glands and Cap 75 Flasks, Conical, Erlenmeyer 53 Micro Acetyl Group Determination App. 96 Flasks, Conical, with interchangeable stopper 57 Micro Funnel, 20 mm. dia. 76 Micro Kjeldahl Nitrogen Distillation Apparatus 114 Sintered Glass Filter Tube 88 Millipore Type Membrane Filter Holder Assembly 87 Sintered Glass Gas Distribution Tube 88 Moisture Determination Apparatus 111 Sintered Glassware, Porosity Grades 85 Nitrogen Distillation Apparatus 115 Sockets, double 60 Oven/Incubator Thermometers 122 Sockets, Plain Shank, Single 60 Packing for Plain Columns 84 Soil moisture gauge 112 Packing Support 84 Soil Thermometer 123 Packing Support for Large Columns 84 Solvent Recovery Assembly 94 Parnas and Wagner Apparatus 114 Soxhlet Extraction Apparatus 102 Petri Dishes, Culture 28 Soxhlet Fat Extraction Apparatus 103 Petri Dishes, Culture AMBER 28 Spare Extractor for Soxhlet Apparatus 102 Pipette, Alcohol 27 Spare receiver for Dean and Stark 112 Pipette, Artificial Insemination 27 Spare Silver Tube 114 Pipette, Automatic Acid Measure 27 Spare Vacuum 114 Pipette, E.S.R 27 Specimen Jar, with Screw Cap 8 Pipettes, micro liter (Lambda), class ‘B’ 25 Splash Head, Double Bulb, Sloping 69 Pipettes, Automatic with Overflow Cup 26 Splash Heads, Adapter, straight 69 Pipettes, Automatic, Quick acting 26 Splash Heads, pear Shape, Sloping 68 Pipettes, for milk Test, Bacteriological 27 Splash Heads, pear Shape, Vertical 68 Pipettes, for milk testing Class A 26 Stainless Steel Clips 49 Pipettes, for milk testing Class B 26 Steam Distillation Apparatus for Fluoride 97 Pipettes, Measuring, Graduated, Mohr Type 24 Steam Distillation Assembly 93 Pipettes, Measuring, Graduated, Serological type 24 Steam Distillation Heads, Pear Shape, Sloping 69 Pipettes, Measuring, Graduated, Serological type 25 Still Heads, recovery Bend, Sloping (Elbow) 67 Pipettes, Mechanical 27 Still Heads, Recovery Bend, vertical 67 Pipettes, micro liter (Lambda), class ‘A’ 25 Stirrers Guides and Gland 74 Pipettes, Pasteur 27 Stirrers, Anchor 74 Pipettes, Transfer, Volumetric with one mark Class A 23 Stirrers, Centrifugal 74 Pipettes, Transfer, Volumetric with one mark Class B 23 Stirrers, Collapsible Paddle 73 Pipettes, Transfer, Volumetric, AMBER 23 Stirrers, Fixed Paddle 73 Plain Silicon Septa 107 Stirrers, Link 73 Powder Funnel with cone B24 76 Stirrers, PTFE Bladed 74 Powder Funnel, plain 76 Stirrers, Semi Micro 74 Precision Chemical Thermometers 121 Stirrers, Teflon Bladed 73 Preparation Assembly, consists of R.B Flask 91 Stopcock , Oblique Bore 115 Pressure Equalising Funnels, Cylindrical 82 Stopcock for Burette 116 Pressure Equalising funnels, Pear shape 82 Stopcock for Kipp’s Apparatus 117 Psychrometer 124 Stopcock for Vertical drip 116 PTFE, Silicon Bonded Septa 108 Stopcock, C Bore 116 Reaction Assembly Liebig condenser 90 Stopcock, for Aspirator 117 Recovery Assembly 94 Stopcock, for Burette, Double Oblique 118 Recovery Heads, sloping with B14 Socket 67 Stopcock, for Burette, Straight Bore 118 Reflux Assemblies, Consists of R.B. 89 Stopcock, for Separating Funnel 118 Seals for Chromatography Vials 110 Stopcock, for Separating Funnels 116 Semi Micro Kjeldahl Apparatus 113 Stopcock, L Type 120 Separating Dropping Funnels, Cylindrical, Graduated 80 Stopcock, L Type, Three Limbs 120 Separating Funnels, AMBER 77 Stopcock, L Type, Two Limbs with Mercury Cup 120 Separating Funnels, Pear shape 79 Stopcock, Mercury cup 120 Separating Funnels, with glass Stopcock 77 Stopcock, Mercury Cup, Three Limb 121 Separating Funnels, with PTFE 78 Stopcock, Oblique Bore, with PTFE key 118 Separating Funnels, with PTFE key Stopcock 78 Stopcock, screw Type key with Two Plain limbs 117 Separating Funnels, with PTFE key Stopcock 78 Stopcock, Screw Type, PTFE key 117 Separating Funnels, with PTFE Plug 81 Stopcock, Single Oblique Bore 119 Separating Funnels, with Screw type 77 Stopcock, Straight Bore with hollow plug 119 Separating Funnels, with Stopcock 78 Stopcock, Straight Bore with PTFE Key 118 Separating/Dropping Funnels 80 Stopcock, T or Y Bore, with PTFE key 118 Separating/Dropping funnels, Cylindrical 81 Stopcock, T or Y Type 119 Separating/Dropping Funnels, Cylindrical with screw type 80 Stopcock, Three Way 119 Shaft for Teflon Bladed stirrers 73 Stopcock, three way, Double Oblique Bore 116 Simple Glands with cap 75 Stopcock, three way, T Bore 115 Stopcock, three way, with Twin Bore 116 PLASTICWARE Stopcocks, Straight Bore 115 Beakers 125 Stoppers for above pressure 34 Buchner Funnel 125 Stoppers, Hollow, Hexagonal/Penny head 61 CARBOY WITH STOP COCK 125 Stoppers, Solid Penny or flat Head 62 CENTRIFUGE TUBE CONICAL BOTTOM 125 Straight Industrial Thermometers 122 CENTRIFUGE TUBE ROUND BOTTOM 126 Stuffing Box Glands with Pulley 75 CONICAL FLASK 126 Teflon Gaskets 49 CONICAL MEASURES 126 Test Tube with Socket, without stopper 34 CONNECTORS (T & Y) 126 Test Tube, Pressure 34 DESICCATOR (PLAIN) 126 Test Tubes, Graduated 32 DESICCATOR VACUUM 129 Test Tubes, Neutral, Hard Glass 34 DRAINING BASKET 129 DROPPING BOTTLES 129 Test Tubes, Round or flat bottom, Graduated 33 FISHER CLAMP 129 Test Tubes, Round or flat bottom, Plain 33 FLASK STAND 129 Test Tubes, with interchangeable stopper 33 FLOAT RACK 128 Thermometer Pocket, Closed End 72 FUNNEL HOLDER 128 Thermometers 121 FUNNELS -LONG STEM 128 Thistle Funnel head 71 HEAVY DUTY VACUUM BOTTLE 128 Thistle Funnel, 30 cm. stem 76 KIPP’S APPARATUS 127 Tube Sealed, with reduced ends, with Sintered Disc. 87 LABORATORY TRAY 127 Tube, Centrifuge, graduated 32 MEASURING CYLINDER HEXAGONAL 127 Tube, Centrifuge, Oil 32 MEASURING CYLINDERS 127 Tube, Stokes 32 MEASURING JUGS 130 Tubes Melting point 35 NARROW MOUTH BOTTLE 130 Tubes, Calcium Chloride 35 PETRI DISH 130 Tubes, Calcium Chloride, U- Form 35 PETRI DISH (CULTURE) 130 Tubes, Centrifuge, with Screw Cap 31 PETRI DISH (DISPOSABLE) 130 Tubes, Centrifuge, Conical bottom, Graduated 30 PIPETTE PUMP 133 Tubes, Centrifuge, Conical Bottom, Graduated 31 PIPETTE STAND (HORIZONTAL) 133 Tubes, Centrifuge, Conical bottom, Plain 30 PIPETTE STAND (VERTICAL) 133 Tubes, Centrifuge, Plain with Interchangeable stopper 31 PLANTATION POTS 133 Tubes, Centrifuge, Round bottom 32 POLICEMEN STIRRING RODS 133 Tubes, Centrifuge, short 32 RACK FOR MICRO CENTRIFUGE (FOLDING) 132 Tubes, Centrifuge, with Screw Cap, Graduated 31 RACK FOR MICRO CENTRIFUGE TUBE 132 Tubes, Leighton, for culture work, plain 30 RACK FOR PETRI DISHES 132 Tubes, Leighton, or culture work, with screw Cap 30 REAGENT BOTTLES (NARROW MOUNT) 132 Tucker Gas Generator 97 REAGENT BOTTLES (WIDE MOUTH) 132 U Tube, with two sockets or cones 71 REAGENT RESERVOIR 131 Vacuum Distillation 92 RETORT STAND 131 RIA VIAL 131 Vacuum Distillation Unit 96 SEPERATORY FUNNEL 131 Vacuum Drying Pistol 96 SLIDE BOX 135 Vacuum Sublimation Assembly 93 SLIDE STORAGE RACK 135 Viscometer, College Pattern, Ostwald’s 36 SOFT LOOP STERILE 135 Viscometers, (Suspended Level) 36 SPATULA 135 Viscometers, Cannon Fenske 37 SPECIMEN JAR (GAS JAR) 135 Viscometers, Falling Sphere 37 TEST TUBE BASKETS 134 Viscometers, U- Tube, Reverse Flow 37 TEST TUBE CAP 134 Viscometers, U-Tube 36 TEST TUBE STAND 134 Wall Thermometer 123 TEST TUBE STAND (3 TIER) 136 Wall thermometer, Aluminum scale 123 TEST TUBE STAND ROUND 134 Water Distillation Apparatus, Quartz Boiler 101 TEST TUBE WITH SCREW CAP 134 Water Distillations 100 UNIVERSAL MUTLI RACK 136 Water Distillations Spare Parts 100 URINE CONTAINER 136 Water Still 99 UTILITY TRAY 136 Water Still Spare Parts 99 VOLUMETRIC FLASK 136 Wet and Dry Thermometer 123 WASH BOTTLES 125 WIDE MOUTH SQUARE BOTTLES 128 Terms & Conditions

Price All the prices in this list are Ex- works Ambala and subject to market fluctuation and alternation without notice.

Packing & Forwarding Packing, forwarding, freight, insurance and other incidental charges extra.

Sales Tax , Excise & Octroi Will be extra as applicable.

Breakage We take full care in packing the material. The company is not liable for any breakage, shortage and damage in transit. All the goods are supplied at purchases's risk.

Delivery Immediately, otherwise 4-6 weeks time will be required. In case of unavoidable circumstances, company is not bound to execute the order.

By placing the order please give clear dispatch instruction indicating CST No., Name of Railway Station, Your Banker and Our Catalogue No.

Payment 25% advance with the order and balance payment is to be made through online Bank tranfer or by DD or POD before dispatch of material.

Dispute All dispute are subject to Ambala Jurisdiction. INNACLE SCIENTIFIC INDUSTRIES

6/24, Vikas Puri, P.O. Industrial Estate, Jagadhri Road, Ambala Cantt. 133 006 Ph. : 0171- 2698 016 Cell : +91 98965 51333 [email protected] www.pinnaclescientific.com