DOCSLIB.ORG

Osist ISO/DIS 3297:2019 01-Oktober-2019

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Osist ISO/DIS 3297:2019 01-Oktober-2019 - W cd E c0 I d- V 7b E 7 9 R i) c2 1 3 20 P .a /1 - D h st 97 e si 2 R it s/ -3 A s. : d is d rd ar d D r a d o- N a d n is A d an ta t- n st /s is T a l g os S t ul lo / s a 0c eh ( F at e T /c 72 i ai f . 78 eh 6 it e SLOVENSKI STANDARD s. 66 Informatika in dokumentacija - Mednarodna standardna številka serijske d 6- publikacije (ISSN) ar d oSIST ISO/DIS 3297:2019 d bc an - st c4 // e Information and documentation -- International standard serial01-oktober-2019 number (ISSN) s: 4 tp ht Information et documentation -- Numéro international normalisé des publications en série (ISSN) Ta slovenski standard je istoveten z: ICS: 01.140.20 oSIST ISO/DIS 3297:2019 Informacijske vede ISO/DIS 3297:2019 Information sciences 2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.en,fr,de - W cd E c0 I d- V 7b E 7 9 R i) c2 1 3 20 P .a /1 - D h st 97 e si 2 R it s/ -3 A s. : d is d rd ar d D r a d o- oSIST ISO/DIS 3297:2019 N a d n is A d an ta t- n st /s is T a l g os S t ul lo / s a 0c eh ( F at e T /c 72 i ai f . 78 eh 6 it e s. 66 d 6- ar d d bc an - st c4 // e s: 4 tp ht - W cd E c0 I d- V 7b E 7 9 R i) c2 1 3 20 P .a /1 - D h st 97 e si 2 R it s/ -3 A s. : d is d rd ar d D r a d o- oSIST ISO/DIS 3297:2019 N a d n is A d an ta t- n st /s is T a l g os S t ul lo / s a 0c eh ( F at e T /c 72 Information and documentation — International standard i ai f DRAFT INTERNATIONAL STANDARD . 78 eh 6 serial number (ISSN) it e s. 66 d 6- Information et documentation — Numéro international normalisé des publications en série (ISSN) ar d d bc an - st c4 // e s: 4 ICS: 01.140.20 tp ISO/TC ht Voting begins on: 2019-01-02 46 /SC 9 Secretariat: ISO/DIS 3297 Voting terminates on: 2019-03-27 ANSI THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH. IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS. RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION. This document is circulated as received from the committee secretariat. ISO/DIS 3297:2019(E) Reference number © ISO 2019 ISO/DIS 3297:2019(E) - W cd E c0 I d- V 7b E 7 9 R i) c2 1 3 20 P .a /1 - D h st 97 e si 2 R it s/ -3 A s. : d is d rd ar d D r a d o- oSIST ISO/DIS 3297:2019 N a d n is A d an ta t- n st /s is T a l g os S t ul lo / s a 0c eh ( F at e T /c 72 i ai f . 78 eh 6 it e s. 66 d 6- ar d d bc an - st c4 // e s: 4 tp ht © ISO 2019 All rights reserved. UnlessCOPYRIGHT otherwise specified, PROTECTED or required inDOCUMENT the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester. CP 401 • Ch. de Blandonnet 8 CH-1214ISO copyrightVernier, Geneva office Phone: +41 22 749 01 11 PublishedWebsite: inFax: Switzerland www.iso.org +41 22 749 09 47 Email: [email protected] ii © ISO 2019 – All rights reserved - W cd E c0 I d- V 7b E 7 9 Contents R i) c2 1 3 20 P .a /1 - D h st 97 Foreword e si 2 R it s/ -3 Introduction A s. : d is d rd ar d D r a d o- 1 Scope oSIST ISO/DIS 3297:2019 N a d n is n ta t- 2 ........................................................................................................................................................................................................................................ A d ta s is T n s g/ s S a ll o /o 3 Terms and definitions st u al c h ( F t e0 .................................................................................................................................................................................................................................. e ca 2 4 Normative references T i/ 7 i a 8f ................................................................................................................................................................................................................................. h. 7 5 te e6 .i 6 6 Construction of ISSN ds -6 r 6 Assignment of ISSN: Principles a cd 7 nd b a - 8 Establishment of the key title and the abbreviated key title st c4 // e : 4 9 ISSN Clusters ps tt h 10 Human legibility of ISSN ...................................................................................................................................................................................... 11 Machine legibility of ISSN ..................................................................................................................................................................................... ......................................................................................................................................................................................... Annex A ISSN Metadata ............................................................................................................................................................................................................. Annex B Administration of the ISSN network Annex C (normative) Annex D ISO/DIS 3297:2019(E) (normative) .............................................................................................................................................................. Annex E .......................................................................................................................................................................................................... (normative) Annex F ............................................................................................................................................................................... (normative) Check digit for ISSN Bibliography ............................................................................................................................................................................ (informative) Linking ISSN (ISSN-L) (informative) ISSN Metadata Administration of the ISSN network ............................................................................................................................................................................................................................. Interoperability of ISSN Identification of digital formats ................................................................................................................................................ ................................................................................................................................................... .................................................................................................................................................................. Page .................................................................................. ............................................................................................................................................... iv v 1 ...................................................................................................................................... 1 2 ........................................................................................................ 4 ................................................................................................................ 4 5 6 6 7 9 © ISO 2019 – All rights reserved 9 10 11 12 14 16 21 22 iii ISO/DIS 3297:2019(E) - W cd Foreword E c0 I d- V 7b ISO (the International Organization for Standardization) is a worldwide federation of national standards E 7 9 R i) c2 1 3 20 P .a /1 - D h st 97 committeebodies has(ISO been member established bodies). hasThe the work right of preparingto be represented International on that Standards committee. is normally International carried out e si 2 R it s/ -3 organizations,through ISO governmental technical committees. and non-governmental, Each member in body liaison interested with ISO, in also a subject take part for whichin the awork. technical A s. : d is d rd ar d D r a d o- electrotechnical standardization. oSIST ISO/DIS 3297:2019 N a d n is A d an ta t- ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of n st /s is The procedures used to develop this document and those intended for its further maintenance are T a l g os S t ul lo / described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the s a 0c eh ( F at e T /c 72 editorial rules of the ISO/IEC Directives, Part 2 (see i ai f . 78 different types of ISO documents should be noted. This document was drafted in accordance with the eh 6 .it 6e ds -6 r d6 Attention is drawn to the possibility that some of the elements of this document may be the subject of da c n -b on thepatent ISO list rights. of patent ISO shalldeclarations not be held received responsible (see for identifying any or all such patent rights. Details of ta 4 /s c any patent rights identified during the development of the document will be in the
Load more

Recommended publications
  • Technical Reference Manual for the Standardization of Geographical Names United Nations Group of Experts on Geographical Names
    ST/ESA/STAT/SER.M/87 Department of Economic and Social Affairs Statistics Division Technical reference manual for the standardization of geographical names United Nations Group of Experts on Geographical Names United Nations New York, 2007 The Department of Economic and Social Affairs of the United Nations Secretariat is a vital interface between global policies in the economic, social and environmental spheres and national action. The Department works in three main interlinked areas: (i) it compiles, generates and analyses a wide range of economic, social and environmental data and information on which Member States of the United Nations draw to review common problems and to take stock of policy options; (ii) it facilitates the negotiations of Member States in many intergovernmental bodies on joint courses of action to address ongoing or emerging global challenges; and (iii) it advises interested Governments on the ways and means of translating policy frameworks developed in United Nations conferences and summits into programmes at the country level and, through technical assistance, helps build national capacities. NOTE The designations employed and the presentation of material in the present publication do not imply the expression of any opinion whatsoever on the part of the Secretariat of the United Nations concerning the legal status of any country, territory, city or area or of its authorities, or concerning the delimitation of its frontiers or boundaries. The term “country” as used in the text of this publication also refers, as appropriate, to territories or areas. Symbols of United Nations documents are composed of capital letters combined with figures. ST/ESA/STAT/SER.M/87 UNITED NATIONS PUBLICATION Sales No.
    [Show full text]
  • A Könyvtárüggyel Kapcsolatos Nemzetközi Szabványok
    A könyvtárüggyel kapcsolatos nemzetközi szabványok 1. Állomány-nyilvántartás ISO 20775:2009 Information and documentation. Schema for holdings information 2. Bibliográfiai feldolgozás és adatcsere, transzliteráció ISO 10754:1996 Information and documentation. Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange ISO 11940:1998 Information and documentation. Transliteration of Thai ISO 11940-2:2007 Information and documentation. Transliteration of Thai characters into Latin characters. Part 2: Simplified transcription of Thai language ISO 15919:2001 Information and documentation. Transliteration of Devanagari and related Indic scripts into Latin characters ISO 15924:2004 Information and documentation. Codes for the representation of names of scripts ISO 21127:2014 Information and documentation. A reference ontology for the interchange of cultural heritage information ISO 233:1984 Documentation. Transliteration of Arabic characters into Latin characters ISO 233-2:1993 Information and documentation. Transliteration of Arabic characters into Latin characters. Part 2: Arabic language. Simplified transliteration ISO 233-3:1999 Information and documentation. Transliteration of Arabic characters into Latin characters. Part 3: Persian language. Simplified transliteration ISO 25577:2013 Information and documentation. MarcXchange ISO 259:1984 Documentation. Transliteration of Hebrew characters into Latin characters ISO 259-2:1994 Information and documentation. Transliteration of Hebrew characters into Latin characters. Part 2. Simplified transliteration ISO 3602:1989 Documentation. Romanization of Japanese (kana script) ISO 5963:1985 Documentation. Methods for examining documents, determining their subjects, and selecting indexing terms ISO 639-2:1998 Codes for the representation of names of languages. Part 2. Alpha-3 code ISO 6630:1986 Documentation. Bibliographic control characters ISO 7098:1991 Information and documentation.
    [Show full text]
  • 2021 Nr. 10 2021-05-31
    LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS 2015 M. NR. 5 LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS 2021 Nr. 10 2021-05-31 1 2021 M. NR. 10 (2021-05-31)｜LIETUVOS STANDARTIZACIJOS DEPARTAMENTO BIULETENIS TURINYS ATNAUJINTA LST TK 36 APLINKOS APSAUGA VEIKLOS SRITIS ............................................................................................................. 3 IŠLEISTI LIETUVOS STANDARTAI IR STANDARTIZACIJOS LEIDINIAI ................................................................................................ 3 IŠLEISTA NACIONALINIO STANDARTO PATAISA ..................................................................................................................... 3 IŠLEISTI PERIMTIEJI EUROPOS STANDARTAI IR STANDARTIZACIJOS LEIDINIAI .................................................... 3 IŠVERSTI Į LIETUVIŲ KALBĄ PERIMTIEJI STANDARTAI .................................................................................................... 12 NEGALIOJANTYS LIETUVOS STANDARTAI IR STANDARTIZACIJOS LEIDINIAI...................................................................... 12 SKELBIAMI NEGALIOSIANČIAIS LIETUVOS STANDARTAI IR STANDARTIZACIJOS LEIDINIAI ...................................... 18 PERŽIŪRIMI NACIONALINIAI STANDARTAI ........................................................................................................................................... 18 PERŽIŪRIMI EUROPOS STANDARTAI IR STANDARTIZACIJOS LEIDINIAI ...............................................................................
    [Show full text]
  • ISO 11940-2:2007 Db1b724a95ea/Iso-11940-2-2007
    INTERNATIONAL ISO STANDARD 11940-2 First edition 2007-05-01 Information and documentation — Transliteration of Thai characters into Latin characters Part 2: Simplified transcription of Thai language iTeh STInformationANDA etR documentationD PREV —I TranslittérationEW des caractères thaï en caractères latins (stPartieand 2:a Transcriptionrds.iteh simplifiée.ai) de la langue thaï ISO 11940-2:2007 https://standards.iteh.ai/catalog/standards/sist/f107d633-0a12-4a12-9e97- db1b724a95ea/iso-11940-2-2007 Reference number ISO 11940-2:2007(E) © ISO 2007 ISO 11940-2:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. iTeh STANDARD PREVIEW (standards.iteh.ai) ISO 11940-2:2007 https://standards.iteh.ai/catalog/standards/sist/f107d633-0a12-4a12-9e97- db1b724a95ea/iso-11940-2-2007 COPYRIGHT PROTECTED DOCUMENT © ISO 2007 All rights reserved.
    [Show full text]
  • Inventory of Romanization Tools
    Inventory of Romanization Tools Standards Intellectual Management Office Library and Archives Canad Ottawa 2006 Inventory of Romanization Tools page 1 Language Script Romanization system for an English Romanization system for a French Alternate Romanization system catalogue catalogue Amharic Ethiopic ALA-LC 1997 BGN/PCGN 1967 UNGEGN 1967 (I/17). http://www.eki.ee/wgrs/rom1_am.pdf Arabic Arabic ALA-LC 1997 ISO 233:1984.Transliteration of Arabic BGN/PCGN 1956 characters into Latin characters NLC COPIES: BS 4280:1968. Transliteration of Arabic characters NL Stacks - TA368 I58 fol. no. 00233 1984 E DMG 1936 NL Stacks - TA368 I58 fol. no. DIN-31635, 1982 00233 1984 E - Copy 2 I.G.N. System 1973 (also called Variant B of the Amended Beirut System) ISO 233-2:1993. Transliteration of Arabic characters into Latin characters -- Part 2: Lebanon national system 1963 Arabic language -- Simplified transliteration Morocco national system 1932 Royal Jordanian Geographic Centre (RJGC) System Survey of Egypt System (SES) UNGEGN 1972 (II/8). http://www.eki.ee/wgrs/rom1_ar.pdf Update, April 2004: http://www.eki.ee/wgrs/ung22str.pdf Armenian Armenian ALA-LC 1997 ISO 9985:1996. Transliteration of BGN/PCGN 1981 Armenian characters into Latin characters Hübschmann-Meillet. Assamese Bengali ALA-LC 1997 ISO 15919:2001. Transliteration of Hunterian System Devanagari and related Indic scripts into Latin characters UNGEGN 1977 (III/12). http://www.eki.ee/wgrs/rom1_as.pdf 14/08/2006 Inventory of Romanization Tools page 2 Language Script Romanization system for an English Romanization system for a French Alternate Romanization system catalogue catalogue Azerbaijani Arabic, Cyrillic ALA-LC 1997 ISO 233:1984.Transliteration of Arabic characters into Latin characters.
    [Show full text]
  • ISO 11940:2005 C9f6d4746954/Sist-Iso-11940-2005
    INTERNATIONAL ISO STANDARD 11940 First edition 1998-06-01 Information and documentation — Transliteration of Thai Information et documentation — Translittération du thaï iTeh STANDARD PREVIEW (standards.iteh.ai) SIST ISO 11940:2005 https://standards.iteh.ai/catalog/standards/sist/cb525c7b-da4d-459b-b69d- c9f6d4746954/sist-iso-11940-2005 r Reference numbe A ISO 11940:1998(E) ISO 11940:1998(E) Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. iTeh STANDARD PREVIEW International Standard ISO 11940 was prepared by Technical Committee ISO/TC 46, Information and documentation(s, tSubcommitteeandard sSC.i t2,e Conver-h.ai) sion of written languages. SIST ISO 11940:2005 Annex A forms an integral parthttps :/of/st athisndar dInternationals.iteh.ai/catalog /Standard.standards/si sAnnexest/cb525c7b -Bda4d-459b-b69d- and C are for information only. c9f6d4746954/sist-iso-11940-2005 © ISO 1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher.
    [Show full text]
  • A Könyvtárüggyel Kapcsolatos Nemzetközi Szabványok
    A könyvtárüggyel kapcsolatos nemzetközi szabványok 1. Állomány-nyilvántartás ISO 20775:2009 Information and documentation. Schema for holdings information 2. Bibliográfiai feldolgozás és adatcsere, transzliteráció ISO 10754:1996 Information and documentation. Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange ISO 11940:1998 Information and documentation. Transliteration of Thai ISO 11940-2:2007 Information and documentation. Transliteration of Thai characters into Latin characters. Part 2: Simplified transcription of Thai language ISO 15919:2001 Information and documentation. Transliteration of Devanagari and related Indic scripts into Latin characters ISO 15924:2004 Information and documentation. Codes for the representation of names of scripts ISO 21127:2014 Information and documentation. A reference ontology for the interchange of cultural heritage information ISO 233:1984 Documentation. Transliteration of Arabic characters into Latin characters ISO 233-2:1993 Information and documentation. Transliteration of Arabic characters into Latin characters. Part 2: Arabic language. Simplified transliteration ISO 233-3:1999 Information and documentation. Transliteration of Arabic characters into Latin characters. Part 3: Persian language. Simplified transliteration ISO 25577:2013 Information and documentation. MarcXchange ISO 259:1984 Documentation. Transliteration of Hebrew characters into Latin characters ISO 259-2:1994 Information and documentation. Transliteration of Hebrew characters into Latin characters. Part 2. Simplified transliteration ISO 3602:1989 Documentation. Romanization of Japanese (kana script) ISO 5963:1985 Documentation. Methods for examining documents, determining their subjects, and selecting indexing terms ISO 639-2:1998 Codes for the representation of names of languages. Part 2. Alpha-3 code ISO 6630:1986 Documentation. Bibliographic control characters ISO 7098:1991 Information and documentation.
    [Show full text]
  • String.Latin+ 1.2
    String.Latin+ 1.2 Zeichen in Unicode für die elektronische Verarbeitung von Namen und den Datenaustausch in Europa Fachgruppe String.Latin Veröffentlicht 15. Januar 2020 String.Latin+ 1.2: Zeichen in Unicode für die elektronische Verarbeitung von Namen und den Datenaustausch in Europa PDF generiert am 15.1.2020 7:14 Uhr. Veröffentlicht 15. Januar 2020 Copyright © 2020 KoSIT —Koordinierungsstelle für IT Standards, Bremen [http://www.xoev.de] Zusammenfassung Dieses Dokument ist eine kommentierte und ergänzte Fassung der DIN SPEC 91379 vom März 2019, mit der eine in Deutschland relevante Teilmenge des Standards Unicode festgelegt wird. Alle Aussagen und Festlegungen der DIN SPEC 91379 sind unverändert auch in diesem Dokument enthalten. Dies gilt insbesondere für die Festlegungen zu Schriftzeichengruppen und Datentypen sowohl im normativen, als auch im erweiterten Bereich. Die in diesem Dokument zusätzlich enthaltenen Kommentare und Ergänzungen sollen Nutzern der DIN SPEC 91379, die überwiegend Behörden und Organisationseinheiten des öffentlich-rechtlichen Bereichs sein werden, Hinweise zu deren Anwendung geben. So enthält dieses Dokument einen Abschnitt über die Beschlusslage der öffentlichen Verwaltung, die Behörden unter bestimmten Umständen zur Anwendung der DIN SPEC 91379 verpflichtet (Abschnitt G), und eine Liste häufig gestellter Fragen und Antworten (Abschnitt E). Zudem wird die Bedeutung der Unicode Normalform NFC für die Interoperabilität bei Datenübermittlungen, die auf der DIN SPEC 91379 basieren, in Abschnitt B.7 dargestellt. Inhaltlich ist die DIN SPEC 91379 ein Nachfolger des von der KoSIT im Auftrag des IT Planungsrats herausgegebenen Standards „Lateinische Zeichen in Unicode“. Dieser ist in der Version 1.1 vom IT Planungsrat für verbindlich erklärt worden (siehe Beschluss 2014/04 der 13.
    [Show full text]
  • Iso 20674-1:2019
    INTERNATIONAL ISO STANDARD 20674-1 First edition 2019-10 Information and documentation — Transliteration of scripts in use in Thailand — Part 1: Transliteration of Akson-Thai-Noi Information et documentation — Translittération des scripts utilisés en Thaïlande — Partie 1: Translittération du Akson-Thaï-Noï Reference number ISO 20674-1:2019(E) © ISO 2019 ISO 20674-1:2019(E) COPYRIGHT PROTECTED DOCUMENT © ISO 2019 All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address belowCP 401or ISO’s • Ch. member de Blandonnet body in 8 the country of the requester. ISO copyright office Phone: +41 22 749 01 11 CH-1214 Vernier, Geneva Fax:Website: +41 22www.iso.org 749 09 47 PublishedEmail: [email protected] Switzerland ii © ISO 2019 – All rights reserved ISO 20674-1:2019(E) Contents Page Foreword ........................................................................................................................................................................................................................................iv Introduction ..................................................................................................................................................................................................................................v
    [Show full text]
  • ISO 11940-2:2007(E) This Is a Free 4 Page Sample
    INTERNATIONAL ISO STANDARD 11940-2 First edition 2007-05-01 Information and documentation — Transliteration of Thai characters into Latin characters Part 2: Simplified transcription of Thai language Information et documentation — Translittération des caractères thaï en caractères latins Partie 2: Transcription simplifiée de la langue thaï Reference number ISO 11940-2:2007(E) This is a free 4 page sample. Access the full version online. © ISO 2007 ISO 11940-2:2007(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below. COPYRIGHT PROTECTED DOCUMENT © ISO 2007 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester.
    [Show full text]
  • Report from ISO TC46 - Annual Meetings
    Report from ISO TC46 - annual meetings. Sydney, May, 2 nd – 6th 2011 The following report summarizes the key-topics emerged during the week in Sydney - with particular regards to the discussions held in the meetings of SC4, S8 SC9 1 and plenary TC46 - of probable interest to the IFLA community. [For the list of published standards, cfr . Appendix A] 1. Standardization of ePub 3.0 SC4 will establish an ad hoc group (led by U.S. - ANSI) to draft a document to submit to the ISO/IEC JTC 1 SC 34 2 secretariat and its ad hoc technical group, organized in response to their resolution 58 “Standardization of ePub”. This document shall outline a strategy and proposed terms of reference for a joint working group. The goal is to ensure that areas of interest to TC 46, such as descriptive and administrative metadata and longterm preservation, are taken into account in any international standard that might be developed based on ePub. On the other hand, TC46 endorses this action on ePub version 3.0. TC 46 requests SC 4 to report back on the reactions to this proposal from IDPF 3 and the ISO/IEC JTC 1 SC 34 ad hoc technical group. 2. Confirmation of standards Confirmation of the following standards: ISO 3602:1989 (version 4) Information and documentation -- Romanization of Japanese (kana script) ISO 3166-2:2007 (Ed 2) Codes for the representation of names of countries and their subdivisions -- Part 2: Country subdivision code ISO 11940-2:2007 Information and documentation -- Transliteration of Thai characters into Latin characters -- Part 2: Simplified.
    [Show full text]
  • 3 July TOR for Feasibility Study
    Terms of Reference for a Study to Evaluate Available Solutions for the Submission and Display of Internationalized Contact Data 1. Overview As part of the process to implement the internationalized registration data recommendations of the ICANN WHOIS review team, ICANN seeks to commission a study to document and evaluate the potential solutions submitting or displaying contact data in non-ASCII (American Standard Code for Information Interchange) character sets. In this Terms of Reference, we provide the background and outline the requirements for the study. 2. Background Domain Name Registration Data (DNRD) is accessible to the public via a Directory Service (also known as the WHOIS service). It Domain Name Registration Data (DNRD) – refers to the information that individuals or organizations (“registrants”) submit when they register a domain name. Domain name registrars or registry operators collect these data, and some of the data is made available for public display or for use by applications. The data elements that registrants must submit to ICANN Accredited Generic Top Level Domain (gTLD) registrars (and accurately maintain), are specified in the ICANN Registrar Accreditation Agreement (RAA). For Country Code Top Level Domains (ccTLDs), the operators of these TLD registries define their own data elements or follow their country’s policy regarding the request and display of registration information. Much of the currently accessible domain name registration data (DNRD) is encoded free form in US-ASCII. This legacy condition is convenient for WHOIS service users who are sufficiently familiar with languages that can be submitted and displayed in US-ASCII to be able to use ASCII script to submit DNRD and make and receive WHOIS queries using that script.
    [Show full text]