VOLUME 7.1 Every Wheelchair User Deserves PELVIC POSITIONING Hip Belts Evoflex® 6 - 10 Leg Harness Standards-Tested Support

Home , Zipper

PRODUCT GUIDE | VOLUME 7.1 Every wheelchair user deserves PELVIC POSITIONING Hip Belts Evoflex® 6 - 10 Leg Harness standards-tested support. Buckle Covers

C-3:S3 201 W 3

Seat belts in motor vehicles and children’s car seats are all A N I S S E O R

| standards-tested. Wheelchair users deserve no less. 1

I 6

8 4

N UPPER BODY SUPPORT

® 3 ™

2 Monoflex

Unique in our product class, Bodypoint tests our products to 0

T 1

E Chest Belt all applicable third party safety and performance standards, S T E D 11 - 13 including ISO, ANSI/RESNA and EN. Trimline Shoulder Harness PivotFit™ Shoulder Harness Stayflex™ Chest Support

MOUNTING HARDWARE 14 - 15 Clamps and Fastener Kits

LOWER BODY SUPPORT Leg Harness Aeromesh® Calf Strap and Panel 16 - 17 Ankle Huggers® Hook-and-Loop Toe Straps

BATH & SHOWER POSITIONING Aeromesh® Belts 18 - 19 Shower Chair Calf Support

POWER WHEELCHAIR DRIVING Tri-Lock™ Midline Mounting Kits 20 - 21 Joystick Handles

TEMPORARY & LIFESTYLE POSITIONING Universal Elastic & Extension Straps Mobility Bag 22 Evoflex®

A B

SIZING 23 C D

2 | BODYPOINT.COM BODYPOINT.COM | 3 From shoulders to feet, Materials that make a difference ® Bodypoint has the solution. NEW! Stainless steel midline arms Our versatile Tri-Lock™ midline arms are now made from satin finish stainless steel USER ISSUES PRODUCT EXAMPLES that better resists corrosion and scratches. Easily cut to size with a tube cutter with the user in the chair. Fall risk, sacral sitting (or risk for), Two or four-point hip belt, with sub-ASIS pads posterior or anterior pelvic tilt, (LB belts) if needed. With significant sliding risk pelvic obliquity/rotation or obliquity/rotation, consider a four-point belt or Evoflex®. Two-point padded hip belt

Concerns about pressure on Sub-ASIS pads with either two- or four-point bladder, skin, atrophy sub-ASIS compatible (LB) belt or the Evoflex®. Sub-ASIS compatible belt & pads

™ Shoulder rotation, spine stiffness/ For maximum shoulder retraction, consider the J-shaped Tri-Lock midline arm pain, asymmetrical head position, Trimline Harness (worn backpack style). scoliosis, kyphosis, lordosis For balanced shoulder/sternal support, choose the Dynamic PivotFit™ for more torso movement, or the Standard version for spinal curvature and asymmetry. Trimline shoulder harness

Upper body instability, head/ Monoflex™ for two-point support. Stayflex™ for neck/sternal collapse, respiratory four-point support, with or without zipper. impairment, dysphagia, dysphasia, Chest Belt or Quad Belt for independent use, general neuromuscular weakness can add Slip-On Pads. One-piece Monoflex™

Leg sliding, thrusting, or spasticity Leg Harness loops around inner thighs without limiting NEW! Laminar™ Pads with CORDURA® Nylon forward reach or pressing on the bladder. Or use the Universal Elastic Strap (can double wrap leg of most In 1995, Bodypoint revolutionized postural supports when we introduced concern) for temporary positioning. Leg harness Laminar™ Pads with full-thickness bound edges. In 2017, we continued this tradition of innovation with a CORDURA® fabric Calf and/or ankle stiffness/spasms, Calf Strap or Panel to relax, support. Ankle Huggers® ® leg flexion/extension, feet in to center, stabilize feet. New Shower Chair Calf and proprietary edge binding on all padded hip belts, Ankle Huggers , suboptimal position, feet at risk Support. and non-stretch harnesses. for falling, crossing Calf strap These new materials completely eliminate wrinkles to preserve skin integrity and comfort, increase abrasion resistance, and meet the new Pain and/or fatigue with existing Tri-Lock™ midline joystick mounting system; L-shaped joystick configuration or midline arm for most versatility, J-shaped arm for swinging ISO standards for biocompatibility and flammability. mount over trays, and straight arm for close-fitting over lap. Flex-shaft joystick handles dampen vibration and protect joystick electronics from damage. See assortment on page 21. L-shaped midline arm Wrinkles are eliminated Needs additional postural support Evoflex® or Monoflex™ on chest or abdomen, or but "does not want to wear a belt" Chest Belt; Leg Harness or Calf Support Evoflex®

Temporary support need; e.g., Evoflex® or Universal Elastic Strap for work, study, sports, travel Universal Elastic Strap

Independent user with limited hand Chest Belt, two-point unpadded hip belt with Rehab function who needs two-point upper Latch™; can loop Universal Elastic Strap (with extension body support/prompt if needed) around vehicle seat, exerciser, stander, recliner Chest belt

4 | BODYPOINT.COM BODYPOINT.COM | 5 PELVIC POSITIONING PELVIC POSITIONING

Choose the right padded hip belt See page 9 for non-padded belts.

1. Belt style

® Sub-ASIS Compatible Belts Two-Point Padded Hip Belt Four-Point Padded Hip Belt Evoflex Used with sub-ASIS pads, sub-ASIS Compatible Belts (part numbers Simple to use and easy to clean, Stiffened straps hold belt upright for easy closure Extra anchor points prevent belt from beginning with "LB" on page 8) provide two firm points of contact, padded hip belts comfortably and clutter-free use for transfers. Gain the benefits of migrating up or down, while addressing for improved control of obliquity and rotation, while protecting skin support postural alignment. user sliding and asymmetry. retractable belts without the hardware against the hips. and avoiding bladder pressure. sub-ASIS pad Available in two-point and four--point styles. Sub-ASIS pads sold separately. See page 10. 2. Buckle 3. Pull type 4. End-fitting

Push-Button Center-Pull Hip Belt Smooth, rounded corners For low muscle tone or weakness To lengthen belts if needed for mounting, see prevent snagging. Padded hip belt sizing the Belt Mounting Extension Kit on page 14. Cover is removable for cleaning or replacement. Measuring for padded belts and the Evoflex®

1. Angle and hold user in a correct, comfortable position to determine Rear-Pull Hip Belts the most effective position and angle Side-Release ™ for the belt. Flat-Mount A B Lightweight, crush-resistant, Versatile, lowest profile 2. At the angle of your hands, measure prevents accidental release Dual-Pull Hip Belt the distance over the body with a Greater adjustability to accommodate flexible tape. This corresponds to the belt’s padded length (B). clothing and weight changes. Only available 3. Find appropriate belt size using C with side-release buckle. D the tables below.

Rehab Latch™ Size* A** B C D Operate easily with Center-Pull and Dual-Pull Hip Belts S38 2.5cm (1") 38cm (15") 5cm (2") 117cm (46") limited hand function M40 4cm (1-1/2") 40cm (15-3/4") 5.5cm (2-1/4") 142cm (56") A B M46 4cm (1-1/2") 46cm (18") 5.5cm (2-1/4") 142cm (56")

Evoflex® Rear-Pull Hip Belt Cinch-Mount™ Swivel Buckle C A B For high muscle tone and pelvic rotation. Time saving, precise, Low profile, high strength, Position and secure one side of the pelvis D equalizes tension easily adjust length 6 5 4 3 2 1 before the other. 1 2 3 4 5 6 to changes in weight, Size* A** B C D clothing S32 2.5cm (1") 32cm (12-1/2") 4.5cm (1-3/4") 117cm (46") C S38 2.5cm (1") 38cm (15") 5cm (2") 117cm (46") D Small Push-Button M36 4cm (1-1/2") 36cm (14") 5.5cm (2-1/4") 130cm (51") Strong, secure, pediatric M46 4cm (1-1/2") 46cm (18") 5.5cm (2-1/4") 142cm (56") Size* A** B C D 6 5 4 3 2 1 size or lower profile for L62 5cm (2") 62cm (24-1/2") 7cm (2-3/4") 155cm (61") S38 2.5cm (1") 38cm (15") 5cm (2") 63cm1 2 (24-3/4")3 4 5 6 adults L82 5cm (2") 82cm (32") 9cm (3-1/2") 206cm (81") M46 4cm (1-1/2") 46cm (18") 5.5cm (2-1/4") 76cm (29-3/4") L92 5cm (2") 92cm (36") 10cm (4") 206cm (81") L62 5cm (2") 62cm (24-1/2") 7cm (2-3/4") 96cm (37-3/4")

* Numeral in part number indicates padded length in centimeters; e.g., M46 has 46cm of padded length. See pages 8-9 for sizing and part numbers. ** Webbing size for all padded belts: S = 2.5cm (1"), M = 4cm (1-1/2"), L = 5cm (2")

6 | BODYPOINT.COM BODYPOINT.COM | 7 PELVIC POSITIONING PELVIC POSITIONING

Padded hip belt options Non-padded hip belts

Webbing size for all padded belts: S= 2.5cm (1"), M= 4cm (1-1/2"), L= 5cm (2"). Non-Padded Hip Belt Numeral after webbing size equals padded length in centimeters; e.g., M46 has 1.5" webbing with 46cm padded length. A basic belt that can be used alone or with our Slip-On Pads (below, right). Proprietary webbing is strong, yet flexible enough for easy tightening. Best for occasional rather than all-day wear. Available in Center-Pull only. Two-Point Standard Padded Belts Four-Point Standard Padded Belts

Buckle Buckle SIZING A Webbing/ Small Webbing/ Small Pull Padded Push- Side- Rehab Swivel Push- Pull Padded Push- Side- Rehab Swivel Push- Type Length Button Release Latch™ Buckle Button Type Length Button Release Latch™ Buckle Button PART NUMBERS

S32 S32 Buckle HB235 D S38 HB475 HB435 S38 Size Push-Button Side-Release Rehab Latch™ M36 M36 HB205 HB215 HB225 HB275 NB215S Size A D S M46 Center-Pull M46 HB405 HB415 HB425 HB475 S 2.5cm (1") 117cm (46") M NB205M NB215M NB225M Center-Pull L62 L62 M 4cm (1-1/2") 142cm (56") L NB205L NB215L NB225L L82 S32 L 5cm (2") 155cm (61") L-EXT NB205L-EXT L92 S38 L-EXT 5cm (2") 206cm (81") S32 M36 HB416 Choose a Flat or Cinch-Mount™ end-fitting from page 8. M46 S38 Dual-Pull

M36 L62 HB216 Dual-Pull M46 S38 HB439 Slip-On Pads L62 M40 Add cushioning where additional relief is needed HB409 HB419 HB429 Rear-Pull on belts and harnesses. Sold in pairs. S38 HB239 M46

M40 PD304-2 Small HB209 HB219 HB229 Rear-Pull Fits S (2.5cm/1") webbing M46 Length: 8" (20cm) Shannon had never been able to PD305-2 Medium operate a belt before, Fits M (3.8cm/1-1/2") webbing Two-Point Sub-ASIS-Compatible Belts Four-Point Sub-ASIS-Compatible Belts but mastered the Length: 10" (25cm) Rehab Latch™ on her Buckle Buckle PD306-2 Large new Evoflex® in a Fits L (5cm/2") webbing Webbing/ Push- Rehab Small Push- Webbing/ Push- Side- Rehab Small Push- few minutes! Length: 12" (30cm) Pull Type Padded Length Button Latch™ Button Pull Type Padded Length Button Release Latch™ Button

S38 LB235 S38 LB435

Center-Pull M46 Center-Pull M46 LB205 LB225 LB405 LB425 L62 L62 LB416 Rear-Pull M46 LB209 LB229 Dual-Pull S38 Rear-Pull M46 LB409 LB429

Evoflex®

Buckle End-Fitting Quad Belt Webbing/ To complete the part number, add extension below: A non-padded belt designed for users with minimal hand function, Padded Rehab Swivel Small Push- Length Push-Button Latch™ Buckle Button with a stiffener and thumb socket that make the belt easier to grasp and manipulate. It features the Bodypoint Rehab Latch™, our lowest ™ S38 EB275 EB235 Flat-Mount -B1 force buckle, which is often the only buckle such users can operate themselves. Center-pull, size Large only. M46 EB205 EB225 ™ NB225L-T L62 Cinch-Mount -B2 Choose a Flat or Cinch-Mount™ end-fitting from page 8.

8 | BODYPOINT.COM BODYPOINT.COM | 9 PELVIC POSITIONING UPPER BODY SUPPORT

Other pelvic support options & accessories Two-point upper body support

™ Replacement covers for Monoflex Chest Support PRODUCT STYLES ® Bodypoint push-button buckles One-piece for more surface area and stretch, two-piece (shown on page 6) for greater chest support and to work with lateral/trunk supports. Use on chest, abdomen, or legs.

Standard Push-Button One-Piece Underarm Release Buckle Replacement With front-pull adjustment Cover Two-Piece Center Release Replaces push-button Reduces bulk under the arms and fits buckle on Bodypoint® under lateral pads for added stability hip belts.

FS018E-1 Use with M (1-1/2") webbing belts

Leg Harness FS019E-1 Use with L (2") webbing belts A simple solution for users who slide out LEG HARNESS SIZING of their chairs, thrust or have spasticity. The padded strap securely holds the leg Measure from the Anterior Superior Iliac MONOFLEX™ PART NUMBERS Spine (ASIS) to the point where the inner at the inner thigh without limiting anterior thigh touches the seat. movement or pressing on the bladder. One-Piece Two-Piece Use with or without a hip belt. Reduced Access Cover Size Underarm Release Center Release Size Fit Range Requires use of fingertip to open buckle. XS SH120XS SH122XS LH600S Small S 8–11" (20–28cm) 23cm (9") x 4cm (1-1/2") Ø14mm button. S SH120S SH122SS M 11-14" (28-36cm) FS018D-1 Use with M (1-1/2") webbing belts LH600M Medium M SH120M SH122M 33cm (13") x 4.5cm (1-3/4") L 14-16" (36-41cm) FS019D-1 Use with L (2") webbing belts MONOFLEX™ SIZING L SH120L SH122L LH600L Large 38cm (15") x 5cm (2") Measure the trunk around the front XL SH120XL SH122XL and sides at the height at which the ™ Add end-fitting extension -B1 or -B2 to part number, as shown on page 8. Monoflex will be worn.

Security Cover END-FITTING OPTIONS Pad Width Prevent unsafe opening — To complete your part number, add an extension below: this cover’s small Ø6mm One-Piece Two-Piece button hole cannot be Size Pad Length Underarm Release Center Release Sub-ASIS Pads operated by a finger, but can be easily opened using a pen tip. XS 31cm (12-1/4") 7cm (2-3/4") 5.5cm (2-1/4") Increase stability and pelvic control while reducing 39.5cm (15-1/2") 7.5cm (3") 6.5cm (2-1/2") pressure on the bladder and sensitive skin. Attach FS018C-1 Use with M (1-1/2") webbing belts S gel-filled pads to the inside of sub-ASIS compatible FS019C-1 Use with L (2") webbing belts M 46.5cm (18-1/4") 10cm (4") 8cm (3-1/4") belts or the Evoflex®. Remove or reposition pads instantly. Sold in pairs. L 54.5cm (21-1/2") 11.5cm (4-1/2") 9cm (3-1/2") XL 62cm (24-1/2") 12.5cm (5") 9.5cm (3-3/4") -B1 Flat-Mount™ -B2 Cinch-Mount™ -B3 Grommet Strap™ PD402-2 Extra Small/Small, 3-7/8" (10 cm) (One-piece Monoflex™ only) fits 1" webbing Extra Small Security Cover PD401-2 Medium/Large, 4-5/8" (12cm) fits 1-1/2" - 2" webbing Snaps securely onto our Small Push-Button Buckle, limiting access by even the smallest Chest Belt fingers. Open instantly with Features a premium hook-and-loop closure See sub-ASIS compatible a pen tip. One size. belts on page 7, Evoflex® with a stiffened grab-ring for easy adjustment on page 6. FS029C-1 by users with limited hand function. One size: Usable Length: 46" (117cm) Webbing Width: 2" (50mm)

Security Cover for Discontinued (pre-2011) SH102 Belt only Push-Button Buckle Snaps securely onto our previous SH102P Belt with PD306 Slip-On M/L Push-Button Buckle (no Pads. See pg. 9. longer available). For 1-1/2" and 2" buckles. Choose end-fitting option shown above, and add extension (-B1 or -B2) to end of FS025C-1 part number.

10 | BODYPOINT.COM BODYPOINT.COM | 11 UPPER BODY SUPPORT UPPER BODY SUPPORT

Four-point upper body support 1. Choose product and style

™ Trimline shoulder harness PivotFit shoulder harness 4. Find part number (Please see sizing table on opposite page) Provide aggressive shoulder retraction with Balance shoulder retraction with sternal support. maximum freedom of movement across the chest. Two-piece style easily accommodates asymmetry. STYLE OPTIONS Trimline Standard PivotFit™ Dynamic PivotFit™

Pull Type Pull Type Pull Type

Sizes Front-Pull Rear-Pull Front-Pull Front-Pull Bodypoint® Sizes Front-Pull Adjustable Rear-Pull Sizes Front-Pull Adjustable Rear-Pull swivel buckle S equalizes tension XXS XXS for an ideal fit M SH230 SH240 XS XS L Dynamic version Standard version S S Encourages movement Non-stretch for more SH250 SH250-C2 SH260 SH270 SH270-C2 SH280 to reduce tone stable positioning M M L L XL XL Stayflex™ chest support Actively stabilize the trunk while encouraging shoulder movement. Patented dual-zone construction keeps support in place when user leans forward. 2. Determine size

Stayflex™, PivotFit™ and Trimline Standard Stayflex™ Narrow Stayflex™ STYLE OPTIONS Measure the maximum width across the Front-Pull Front-Pull Front-Pull Rear-Pull shoulders, at the deltoid muscles. Front-Pull Rear-Pull Adjustable Adjustable With Without With Without With Without Size Shoulder Width With Without With Without With Without Sizes Zipper Zipper Zipper Zipper Zipper Zipper Sizes Zipper Zipper Zipper Zipper Zipper Zipper XXS* 21–24cm (8-1/4–9-1/2") XS 24–28cm (9-1/2–11") XS M S 28–33cm (11–13") S L SH330 SH331 SH330-C2 SH331-C2 SH340 SH341 M 33–41cm (13–16") L 41–48cm (16–19") M XL SH310 SH311 SH310-C2 SH311-C2 SH320 SH321 XL 48–56cm (19–22") Standard Width Narrow Width Zipper L Comfortable with a Comfortably fits women Optional zipper available *XXS in PivotFit™ harness only controlled amount of and users with smaller on both Stayflex™ widths XL stretch frames

3. Select pull style 5. Select end-fitting

Always use an anterior trunk support with a Add extension (-B1 or -B2) to part number. ACCESSORIES: pelvic support such as a hip belt or Evoflex®. Cam Buckle, ¼" (6mm) Hole For frequent length adjustment of Trimline, PivotFit™ and Stayflex™ harnesses. Mount to solid backrest. Sold separately.

FS032-2

-B1 Flat-Mount™ -B2 Cinch-Mount™ Rear-pull Front-pull Front-pull adjustable length* Versatile, lowest profile Time saving, precise, Tighten by pulling down and Tighten by pulling forward, Top straps for mounting to easy adjustment behind the user. Ideal for in front of the user any type of backrest or thicker backrests mounting bracket *Not available on the Trimline

12 | BODYPOINT.COM BODYPOINT.COM | 13 MOUNTING HARDWARE MOUNTING HARDWARE

Versatile mounting hardware Identify chair’s frame type

A B C D E

Cam Buckles Hardware Gauge For frequent length adjustment on Stayflex™, PivotFit™ and This indispensable tool for measuring tubing diameter Trimline Harnesses. Mount to solid backrest. Sold in pairs. helps you choose mounting hardware from page 14. It’s Round Oval Tube Permobil Unitrack Invacare and Pride also an easy way to select screws and nuts sized correctly 1" (25mm) wide with 3/16" (5mm) hole Ø19, 22, 25, 29, Quickie Wheelchairs with threaded holes for 6mm T-Slots 10mm T-Slots FS032-2 for a particular wheelchair. 30, 32mm 27mm x 33mm seat upholstery strip FS033-2 1-1/2" (38mm) wide with 1/4" (6mm) hole BMR-42 FS034-2 2" (50mm) wide with 1/4" (6mm) hole

Select compatible belt mounting hardware Spotlight: the Band Clamp Sold in pairs and available in various sizes (see page 14), the flexible, corrosion-resistant stainless steel Band Clamp, sometimes called a "ribbon clamp," allows mounting accessories in tight spaces on round, oval and tubular frames, even under upholstery.

™ FrameSaver Clamp & Shim Frame Clamp Band Clamp It creates a "hole" where there is none, with the Frame type: A Frame types: A, C Frame types: A, B, C highest strength of any accessory clamp available. Fits Ø25mm (1") tube, and 22mm (7/8") Open-jaw design fits underneath seat Flexible stainless spring steel fits into tight gaps under tube with enclosed shim. Can also be upholstery and armrest pads. Made seats on a wide variety of frames. Useful for mounting used on Ø19mm (3/4") tube with 19mm with sturdy, two-piece aluminum where there are no pre-existing holes. 2-pack. shim, sold separately. 2-pack. construction. 2-pack. HW320-22-2 Ø22mm (7/8") HW303-B-2 25mm clamp + 22mm shim HW310-22-A-2 For Ø7/8" (22mm) tubes HW320-25-2 Ø25mm (1") HW320-27X33-2 27 x 33mm (1-1/16" x 1-5/16"), oval HW303-19SHIM-2 19mm shim HW310-25-A-2 For Ø1" (25mm) tubes HW320-29-2 Ø29mm (1-1/8") HW320-30-2 Ø30mm (1-3/16") HW320-32-2 Ø32mm (1-1/4") Band Clamp used to attach a Cinch-Mount™ (above) and Evoflex® (below)

Independent accessory screw

6mm T-Slot 10mm T-Slot Seat Tube Mounting Belt Mounting Fastener Kit Fastener Kit Bracket Kit Extension Kit Frame type: D Frame type: E Frame type: C Frame type: All Directly mount belts to power Directly mount belts to power Mounting solution for chairs Extend belts and the Evoflex®, and wheelchair slotted seat rails. wheelchair slotted seat rails. with sling seat upholstery or span obstructions when mounting 6mm size for Permobil chairs. 10mm size for Invacare and a solid seat base. end-fittings. Includes fasteners. The independent clamping nut and accessory screw make Pride/Quantum chairs. it easy to swap accessories without removing the clamp. HKA6-1 HW312 HKA12-1 HKA10-1

14 | BODYPOINT.COM BODYPOINT.COM | 15 LOWER BODY SUPPORT LOWER BODY SUPPORT

Secure positioning for legs and feet

Leg Harness Padded Aeromesh® Calf Supports Robust lower body support for users who slide out of their chairs, Distribute lower extremity pressure evenly and control flexion without Ankle Huggers® thrust or have spasticity. The padded strap securely holds the leg at bruising. Promote air flow while maintaining shape with porous The original patented solution for stabilizing the feet while allowing controlled movement. ® the inner thigh without limiting anterior movement or pressing on Aeromesh that’s bonded to a durable but non-creasing stiffener. They reduce joint stress by holding above the ankle, and greatly improve comfort and the bladder. Can be used with or without a hip belt. Keep feet safely and comfortably on foot plates with relaxed calves. tolerance for positioning. Engineered for outstanding fit and lasting quality with our patented Laminar Pad™ and proprietary webbing. Sold in pairs (1 right/1 left). LH600S* Small 23cm (9") x 4cm (1-1/2") STYLE OPTIONS LH600M* Medium 33cm (13") x 4.5cm (1-3/4")

LH600L* Large Calf Strap 38cm (15") x 5cm (2") SP102S Small SP102M Medium *Add end-fitting extension as shown on page 8. SP102L Large Calf Panel SP103S Small SP103M Medium SP103L Large Thinking small CALF PANEL AND CALF STRAP SIZING Side-Release Buckle Measure the curved distance around the legs from the outside of the Adjustment strap retains its precise position wheelchair. Allow for "flex." with every use, and side-release buckle ensures strong closure. Hook-and-Loop Release Soft hook-and-loop adjustment strap conforms to ankle curvature and is quickly S 35 - 40cm (14-16") tightened with each use to ensure a snug fit.

M 40 - 50cm (16-20") ANKLE HUGGERS® SIZING L 50 - 61cm (20-24") Size Fits Ankle Circumference Did you know... XS 5-1/2"–7" (14cm–17cm) By using anatomically correct Laminar S 6-1/2"–8" (17cm–20cm) Pads™ for support, Ankle Huggers® avoid M 7-1/2"–9" (19cm–23cm) the need for straps and hardware against the delicate dorsal foot. NEW! Shower Chair Calf Support L 8-1/2"–11-1/2" (22cm–29cm) See page 19 for details. Measure circumference above ankle. XL 11"–13" (28cm–33cm)

ANKLE HUGGERS® PART NUMBERS Sold in pairs

Size Hook-and-Loop Release Side-Release Buckle XS FT210XS FT220XS S FT210S FT220S Our patented Ankle Huggers®, like our other soft M FT210M FT220M postural supports, are available in sizes suitable for toddlers to teenagers, as well as adults. L FT210L FT220L The comfort and durability for which Bodypoint® is XL FT210XL FT220XL known, coupled with standards-tested performance, helps you recommend and use our products Hook-and-Loop Toe Straps with confidence, for any age. Footman’s Loop Kits (mounting hardware) included Attaches to toe strap slots in footplates. ® 12"long x 1" wide. From shoulders to feet, little bodies need the best with Ankle Huggers are also sold separately support available. Let us know how we can help! FT200AS-1 Small FT221 pair of 2 FT200AL-1 Large

16 | BODYPOINT.COM BODYPOINT.COM | 17 BATH & SHOWER POSITIONING BATH & SHOWER POSITIONING

Easy, hygienic shower chair solutions "The Bodypoint Calf Support NEW! is a wonderful addition to A special fabric for vulnerable skin my shower chair....Thanks Every shower chair user deserves the soft comfort Shower Chair Calf Support for making my position more ® of Aeromesh®, the silky, porous material that lets Our silky, porous Aeromesh belt now has a stable and solid." color-matched, clip-on calf support, for a complete, soap, water, dirt and air flow freely through while - Todd Stabelfeldt, software developer protecting skin, promoting hygiene and preventing protective, hygienic solution for children and adults and accessibility advocate accumulation of bacteria. using shower chairs in tilt. Aeromesh® chest/hip belts and calf support Reduce risks and increase comfort for tilt shower for shower chair users combine for a complete chair users with a combination that looks good and positioning solution, especially for users with poor lasts for a long time! trunk control and/or in tilt. Each product can be machine washed at temperatures up to 140°F/60°C, and machine-dried. BB216-22MM Fits 16" Chair BB218-22MM Fits 18" Chair

BB220-22MM Fits 20" Chair Soap, water, dirt and air easily pass through Aeromesh® fabric Aeromesh® Belts Aeromesh® belts can be worn on the chest or hips, or both. One-piece pad  options work best as a chest belt. Attach to the chair using grommet straps  or plastic slides. Each is length-adjustable using D-rings.   Two-piece pad with grommets Center release for quick & easy access.

BB101M-1 Medium Attach corrosion-resistant 4" wide, 24-1/2 - 34-1/2" long stainless steel grommets to bath chair frame with BB101L-1 Large a screw, Bath Belt Quick 4" wide, 31-41" long Release Knobs (shown below, sold separately)  or Bodypoint® mounting clamps (see page 14).

One-piece pad with grommets Side-release buckles, easily remove & clean

BB111L-1 Large 4" wide, 28-48" long

BB111XL-1 Extra Large 5" wide, 32-52" long

Attaches to frame with sewn-in tubing clips for easy placement and removal. Quick release Clips are compatible with One-piece pad, plastic slides knobs the 22mm (7/8") legrest Features a single layer of Wrap webbing end around the bath chair Use instead of a screw tubing used by all major Aeromesh® without the frame and secure with plastic slides to attach grommeted shower chair brands, stiffener layer that is used including ActiveAid, in our wheelchair Calf Strap BB112L-1 Large bath belts, for easier removal when needed. Aquatec/Clarke, Etac R82, and Calf Panel. 4" wide, 22-68" long Nuprodx, and Raz. Completely porous, like our BB112XL-1 Extra Large FA812-BP-2 pair of 2 Also successfully tested Bath Belts, for maximum 5" wide, 25-72" long with ShowerBuddy chairs hygiene, in a 10cm/4" height (25mm/1"tube). that supports and stabilizes the legs without interfering with shower chair operation.

See our corrosion-resistant Frame Clamp and Band Clamp (page 14) for mounting accessories to shower chairs.

18 | BODYPOINT.COM BODYPOINT.COM | 19 POWER WHEELCHAIR DRIVING POWER WHEELCHAIR DRIVING

Driving made easier TODD "As a man with C4 quadriplegia, my world is ™ Tri-Lock Midline Mounting System in millimeters. My Bodypoint Midline Joystick gives me independence allowing me to drive Brings the joystick or other driving controls/communication with my chin – this is critical to my success! devices closer to the user’s zone of control, just as the steering I’ve had the Midline now for more than a wheel of a car is at midline. Only Bodypoint’s system offers a hidden flip stop for converting from independent to assisted use. decade and it has not failed. Period."

Select a mounting clamp and adapter compatible with the chair, Learn more about Todd at then choose the arm style that best suits user needs. Position bodypoint.com/success-stories joysticks over lap trays, above or below armrests, in driving position or over the shoulder on chin-controlled systems.

1. Tri-Lock™ rotating shaft 2. Mounting adapter Navigate power chairs with smooth precision and Bodypoint mounting adapters are strong, easy to install and fit a wide range of controller models. prevent accidental rotation from driving position. For more controller compatibility information, please see bodypoint.com/midline. Tri-Lock™ Rotating Shaft Positions Joystick Handles Reduces joystick "wiggle" at the end of the midline arm. As shown on opposite page, locks into Shown with a Straight Midline Arm Install by pressing firmly into a clean joystick stem, without tools or setscrews that could damage the three positions for driving, transfers, joystick stem. A firm rubber stem dampens driving vibration and protects fragile components from and table access. bending. Handles can be placed temporarily or permanently. PC024 ™ Tri-Lock 100mm (4") 44mm (Ø1-3/4") Rotating Shaft 76mm (3") PC042 PC045 PC046 PC047 for MK6i, MPJ+ for PGDT Pilot+ for MK5, MPJ, for Permobil Q-Logic Compact Joysticks 3. Mounting clamp 4. Midline arm 76mm (3") The Tri-Lock™ Modular Mounting Clamp is an Corrosion and scratch-resistant, Bodypoint® midline arms can be easily cut to a perfect fit with a tube cutter with 0° Horizontal driving position 51mm (2") 51mm (2") essential component for mounting the Tri-Lock™ the user in the chair. Each supports up to 13.6kg (30lbs) of communication device, phone, tablet and joystick Rotating Shaft to the power chair. Both styles are weight. Choose an L-shaped arm for more options for height and angle, a straight arm for less complex needs, height adjustable and can be installed on either or a J-shaped arm to accommodate trays. Made of 1/2" (12.5mm) satin-finish stainless steel tubing. the left or right armrest. 3" Ergonomic U-Shaped 4" Ergonomic U-Shaped Ball Knob PC101A Fits stem size: Ø3/16" PC102A Fits stem size: Ø3/16" PC103A Fits stem size: Ø3/16" The optional Quick Release Lever attaches to the PC101B Fits stem size: Ø1/4" PC102B Fits stem size: Ø1/4" PC103B Fits stem size: Ø1/4" clamp and allows easy adjustment and removal of the Tri-Lock™ Shaft.

41mm (Ø1-5/8") PC010 Rail Mount 66mm (Ø2-5/8") 35mm (Ø1-3/8") Fits Permobil Unitrack and Pride T-Slotted armrests PC031 J-Shaped Arm PC032 L-Shaped Arm PC033 Straight Arm 90° For transfers 25mm 51mm (1") PC011 Tube Mount (2") 64mm Fits Invacare Ø22 mm, (2-1/2") 7/8" round-tube armrests Midline joystick mounting kits Kits contain: 1 Rotating Shaft, choice of Midline Arm, Mounting Clamp, and Mounting Adapter Rubber Dome Small Rubber Mushroom Head Large Rubber Mushroom Head PC107A Fits stem size: Ø3/16" PC108AS Fits stem size: Ø3/16" PC108AL Fits stem size: Ø3/16" PC107B Fits stem size: Ø1/4" PC108BS Fits stem size: Ø1/4" PC108BL Fits stem size: Ø1/4" Armrest Joystick Mounting Adapter (see above) Arm Style Mounting FA171 Quick-Release Lever Clamp PC042 PC045 PC046 PC047 13mm (Ø1/2") 43mm (Ø1-3/4") For easy adjustment and SIZING removal of the Rotating Shaft Tube Mount PC202-10J PC205-10J PC206-10J PC207-10J 90° Press to disengage J-Shaped 3/16" stem size: 53mm Fits most Invacare Rail Mount PC202-11J PC205-11J PC206-11J PC207-11J (2-1/8") controllers 152mm (6") Tube Mount PC202-10L PC205-10L PC206-10L PC207-10L 1/4" stem size: Fits Permobil, Pride, L-Shaped Aluminum Top PC109A-Blue Fits stem size: Ø3/16" Quantum and Quickie Rail Mount PC202-11L PC205-11L PC206-11L PC207-11L PC109B-Blue Fits stem size: Ø1/4" joystick controllers

Tube Mount PC202-10S PC205-10S PC206-10S PC207-10S Straight 6" Straight Rail Mount PC202-11S PC205-11S PC206-11S PC207-11S PC104A Fits stem size: Ø3/16" 240° For table access PC104B Fits stem size: Ø1/4" Joystick handle assortment display options available upon request.

20 | BODYPOINT.COM BODYPOINT.COM | 21 TEMPORARY & LIFESTYLE POSITIONING SIZING

Measure for a Padded Hip Belt A B 1. Determine the most effective position Keep up with changing needs and angle for the belt. 2. With a flexible tape, measure the distance over the body. This corresponds to the belt’s padded length (B). C D 3. Select the belt size. For all day or part-time positioning Center-Pull and Dual-Pull Hip Belts needs, such as transfers, vehicle travel A B (not a replacement for tie-downs), Size A B C D sports, study, work, rough ground S32 2.5cm (1") 32cm (12-1/2") 4.5cm (1-3/4") 117cm (46") 6 5 4 3 2 1 1 2 3 4 5 6 S38 2.5cm (1") 38cm (15") 5cm (2") 117cm (46") M36 4cm (1-1/2") 36cm (14") 5.5cm (2-1/4") 130cm (51") C D M46 4cm (1-1/2") 46cm (18") 5.5cm (2-1/4") 142cm (56") L62 5cm (2") 62cm (24-1/2") 7cm (2-3/4") 155cm (61") Evoflex® Universal Elastic Strap L82 5cm (2") 82cm (32") 9cm (3-1/2") 206cm (81") Size A B C D 6 5 4 3 2 1 Temporary positioning for work, play, sports, therapy or fittings 1 2 3 4 5 6 L92 5cm (2") 92cm (36") 10cm (4") 206cm (81") S38 2.5cm (1") 38cm (15") 5cm (2") 63cm (24-3/4") with highly stretchable, strong neoprene that won’t snag clothes. M46 4cm (1-1/2") 46cm (18") 5.5cm (2-1/4") 76cm (29-3/4") Easy-grasp hook-and-loop end tab with a convenient thumb hole L62 5cm (2") 62cm (24-1/2") 7cm (2-3/4") 96cm (37-3/4") A B for users with limited hand function. Use on the chest, abdomen, lap or legs. 56" (142cm) length can be cut to size without fraying. Elastic Extension Strap Combine with the Universal Elastic Strap to increase SP110S Small its length – a solution to fit around large chairs or car 8cm (3") high seats. Can also be used alone; e.g., as a pediatric C D support. All extensions are A SP110L Large 28" (72.5cm) long. 11cm (4-1/2") high D Rear-Pull Hip Belts SP111S Small Non-Padded Hip Belts Size A B C D SP110XL Extra Large 8cm (3") high 15cm (6") high Size A D S38 2.5cm (1") 38cm (15") 5cm (2") 117cm (46") S 2.5cm (1") 117cm (46") SP111L Large M40 4cm (1-1/2") 40cm (15-3/4") 5.5cm (2-1/4") 142cm (56") M 4cm (1-1/2") 142cm (56") 1cm (4-1/2") high M46 4cm (1-1/2") 46cm (18") 5.5cm (2-1/4") 142cm (56") L 5cm (2") 155cm (61") SP111XL Extra Large 15cm (6") high L-EXT 5cm (2") 206cm (81")

Stayflex™, PivotFit™ and Trimline Harnesses Monoflex™ Measure the maximum width across the shoulders, at the Measure the trunk around the front and sides at the height at deltoid muscles. which the Monoflex™ will be worn. Size Shoulder Width Underarm Release Center Release (One-piece) (Two-piece) XS 24–28cm (9-1/2–11")

S 28–33cm (11–13") Size Pad Length Pad Width Pad Width XS 31cm (12-1/4") 7cm (2-3/4") 5.5cm (2-1/4") M 33–41cm (13–16") S 39.5cm (15-1/2") 7.5cm (3") 6.5cm (2-1/2") L 41–48cm (16–19") Mobility Bag M 46.5cm (18-1/4") 10cm (4") 8cm (3-1/4") XL 48–56cm (19–22") A user-designed bag that’s unobtrusive, easy to use, and holds a day’s L 54.5cm (21-1/2") 11.5cm (4-1/2") 9cm (3-1/2") PivotFit™ Harness Only: worth of necessities, from power supplies for electronics, to medications. XL 62cm (24-1/2") 12..5cm (5") 9.5cm (3-3/4") Mounts either under the seat or on a side rail. XXS 21–24cm (8-1/4–9-1/2") SP001

Aeromesh® Calf Supports Ankle Huggers® Measure the curved distance around the legs from the Measure circumference above ankle. Evoflex® outside of the wheelchair. Allow for "flex." The least intrusive mounted support for users who "don’t like belts;" stiff, pivoting straps move out XS 14cm–17cm (5-1/2–7")

of the way for transfers or when not needed. S 17cm–20cm (6-1/2–8") S 35 - 40cm (14-16") With a closer fit than hip belts, it can help M 19cm–23cm (7-1/2–9") SM 3540 -- 40cm50cm (14-16")(16-20") users sit "in" instead of "on" their chairs L 22cm–29cm (8-1/2–11-1/2") with or without sub-ASIS pads. ML 4050 -- 50cm61cm (16-20")(20-24") XL 28cm–33cm (11–13") See pages 6-8 for sizing and ordering details. L 50 - 61cm (20-24")

22 | BODYPOINT.COM BODYPOINT.COM | 23 When her head is held high, so is yours.

C-3:S3 201 W 3

A N I S S E O R

| 1 I 6

T 1

E S T E D

Proven performance Easy cleaning Manufactured and tested to all applicable ISO, ANSI/RESNA Machine-washable in hot water/ and EN standards in Seattle, Washington, USA machine-dryable

MITD LI

LIFETIME Y A T RRAN

Outcomes that last Support on demand Chat with us! From shoulders to feet, award-winning Call us, email us, or find clinical and bodypoint.com products offer consistent support, technical resources at bodypoint.com comfort and convenience