Copied from an original at The History Center, Diboll, Texas. www.TheHistoryCenterOnline.com 2013:023 LUFKIN CHROME

The bigger TOOTH CHAIN they come, the harder­ and quicker - they fall with a LUFKIN.

This new LUFKIN Chrome Tooth Chain means more profit for the timberman because chrome teeth hold a point much longer. Too, the rakers have a one-eighth inch face that is not chrome, allowing the filer to cut the rakers down to any This saw necessary depth with an average file. does its own Light weight but heavy duty are the pulling­ characteristics of this LUFKIN Chrome easier on the Tooth Chain. operator ... easier on the equipment.

DU MORE HAND GRINDER

Putting Sharpen your chains with a Dumore this saw to Grinder for a sharp and accurate cutting the test edge. Motor .07 H.P. Available for 110 is a cinch. AC only. See your LUFKIN Dealer for Quickly, easily a demonstration. the teeth L~fk i n Found r y & Mach i ne Co ~ p slice through Dougl a s & Kiln the LUFKIN CHAIN SAWS Lufkin, Texas biggest tree. Manufactured by LUFKIN FOUNDRY & MACHINE COMPANY Lufkin, Texas Copied from an original at The History Center, Diboll, Texas. www.TheHistoryCenterOnline.com 2013:023

MIGHTY MIDGETS Lufkin Model 30-3 H.P. With LUFKIN saws, you can carry the strength and might of and Lufkin Model 46-A • 5 H. P. One Man Operation I three and five horses into the woods with you, and do your own felling and bucking. No matter what kind of cutting you want to do, you've got a speedy, labor-saving combination in LUFKIN $aws and sharp LUFKIN cutting chains. See your LUFKIN dealer and try out the new LUFKIN M30 and M46-A. From the moment you pull the starter, you11 know that these rugged workhorses meet the needs of modem timbermen. When you need a chain saw, buy LUFKIN. You can't beat its performance.

PLUNGE TYPE BOW

CHECK THESE FEATURES!

• POWER PRODUCTS ENGINE - 3 H.P. and 5 H. P. • AUTOMATIC CLUTCH - Centrifugal-wet type • CARBURETOR-Tillotson all-position, engine runs any angle • TRANSMISSION - Steel gears This is a Bow that will go! • OILER - Manual type LUFKIN'S Bow Saw bucks them up quickly without binding • MAGNETO - Phelon in the cut. This 1 5" Bow runs .063 and .058 chain, • STARTER- Self-rewinding hard surfaced. It takes only a • CONTROLS -All within easy reach for efficient operation few seconds to change from bow to straight bar. • NARROW PROFILE GUIDE RAIL - Makes boring easier; keeps weight down You have the same tensioning and reduces binding. Available in the following lengths: 12", 14", 16", 18", 24" and 30" device - same oil hookup. straight bar and 15" bow. This one-man LUFKIN Bow Saw • CASTINGS - Aluminum, easy to weld. is your answer for a versatile cutting tool.