DOCSLIB.ORG

Usda Forest Service Saw Operations Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Usda Forest Service Saw Operations Guide USDA FOREST SERVICE SAW OPERATIONS GUIDE 2017 Electronic Edition v 1.3.2 February 21, 2017 Table of Contents Acknowledgements ................................................................................................................................ 3 Versioning .............................................................................................................................................. 3 Chapter 1 Introduction ........................................................................................................................... 4 1.1 Purpose ........................................................................................................................................ 4 1.2 Scope ............................................................................................................................................ 4 1.3 Goals ............................................................................................................................................ 4 1.4 Authority ...................................................................................................................................... 4 1.5 National Saw Program Technical Advisory Group (TAG) ............................................................. 4 1.6 Partner, Cooperator, or Volunteer Training Program Review: .................................................... 6 1.7 Terms and Definitions .................................................................................................................. 7 1.8 Qualification ............................................................................................................................... 14 Chapter 2 Personal Protective Equipment (PPE) .................................................................................. 15 Chapter 3 Saw Equipment and Handling Requirements ...................................................................... 17 3.1 Chain Saw, Guide Bar and Saw Chain ........................................................................................ 17 3.2 Crosscut Saw .............................................................................................................................. 19 Chapter 4 Sawyer Safety Procedures ................................................................................................... 21 4.1 Operational Safety ..................................................................................................................... 21 4.2 Felling, Bucking, Brushing and Limbing Plans ............................................................................ 21 Objective ...................................................................................................................................... 21 Hazards/obstacles ........................................................................................................................ 22 Leans/binds .................................................................................................................................. 22 Escape routes ............................................................................................................................... 22 Cut Plan ........................................................................................................................................ 22 4.3 Felling Process Specifics ............................................................................................................. 22 4.4 Bucking, Brushing, and Limbing Process Specifics ..................................................................... 25 Chapter 5 Fireline/All Hazard Operations ............................................................................................ 27 Chapter 6 Saw-Related Accidents and Near Misses ............................................................................. 27 Chapter 7 Program Monitoring and Evaluation................................................................................... 27 Appendix A – Danger Tree and Manual Felling Alternatives Information ........................................... 29 Page 2 of 29 Forest Service Saw Operations Guide 1.3.2 Acknowledgements This guide is compiled by the USDA Forest Service (FS) Saw Program Technical Advisory Group (TAG) and derived from recognized industry standards, procedures and practices, as well as appropriate related material contained in Federal standards, Forest Service policy and current training manuals1. Versioning V1.3.2, February 21, 2017 – Updated TAG membership 1 The Forest Service, United States Department of Agriculture (USDA), has developed this information for the guidance of its employees, volunteers, training consultant, and partners, and is not responsible for the interpretation or use of this information by anyone except its own employees. The use of trade, firm, or corporation names in this document is for the information and convenience of the reader, and does not constitute an endorsement by the Department of any product or service to the exclusion of others that may be suitable. The USDA prohibits discrimination in all its programs and activities on the basis of race, color, national origin, sex, religion, age, disability, political beliefs, sexual orientation, or marital or family status. (Not all prohibited bases apply to all programs.) To file a complaint of discrimination, write USDA, Director, Office of Civil Rights, Room 326-W, Whitten Building, 1400 Independence Avenue, SW, Washington, D.C. 20250–9410, or call (202) 720-5964 (voice and TDD). USDA is an equal opportunity provider and employer. Page 3 of 29 Chapter 1 Introduction 1.1 Purpose The purpose of this guide is to define common terms and definitions and identify implementation standards for chain saw and crosscut use by Forest Service employees, volunteers, training consultants and cooperators. The FS Saw Program is designed to protect sawyers from accidental injury, illness or death during saw operations. This guide describes operational procedures to implement policy found in FSM 2358 and are considered the best practices for this activity. The FSSOG is outside of formal Forest Service policy and resides on the TAG SharePoint site to allow for the timely dissemination of safety information, equipment and technique updates. Contact your Regional Saw Program Manager for recommendations of additions or changes. 1.2 Scope This guide provides operational information for the use of chain saws or crosscut saws by Forest Service employees, including volunteers, training consultants and cooperators. For the purposes of this guide, the terms “saw” or “saw program” shall refer to both chain saws and crosscut saws, unless specified otherwise. 1.3 Goals • Provide information that will protect sawyers from injury or mishap when operating saws while performing their official duties. • Provide information on the safe use, handling, and transport of saws in the workplace. • Provide information on felling, limbing and bucking operations when using saws. 1.4 Authority 1. Occupational Safety and Health Act of 1970, Sections 6 (29 U.S.C. 655) and 19 (29 U.S.C. 668). 2. Executive Order 12196. Occupational Safety and Health Programs for Federal Employees. 3. Title 29, Code of Federal Regulations: Part 570, subpart E; Part 1910.95; Part 1910.132; Part 1910.151; Part 1910.242; Part 1910.266; Part 1960. 4. Forest Service Manual (FSM) 2358 Saw Program. 5. Forest Service Handbook (FSH) - 6709.11, Health and Safety Code Handbook; 1509.11, Grants, Cooperative Agreements, and Other Agreements Handbook. 1.5 National Saw Program Technical Advisory Group (TAG) The TAG provides multidisciplinary expertise in saw operations. The TAG consists of the National Saw Program Manager, Regional Saw Program Managers, a representative from the Forest Service Page 4 of 29 Forest Service Saw Operations Guide 1.3.2 Technology and Development Program, other federal agency (as of 2016 BLM and NPS) saw and safety-related subject matter experts. The purpose of the TAG is to develop, coordinate and provide advice and guidance about training, skills, and safety for all aspects of saw operations to the National Saw Program Manager. In particular, the TAG reviews and recommends Nationally Recognized Sawyer Training Courses (NRSTCs) to the National Saw Program Manager. Table 1-TAG Member 2016 Name Region Specialty Title Contact Pete Duncan WO Chainsaw National Program [email protected] Manager 530.394.8100 Adam Washebek 1 Crosscut Program Manager [email protected] 406.777.7416 Todd Wilson 1 Chainsaw Program Manager [email protected] 406.827.0711 Dave Hamrick 2 Chainsaw/Crosscut Program Manager [email protected] 970.295.6780 Steve Sunday 2 Crosscut Program Manager [email protected] 719.486.7408 Tony McWilliams 3 Chainsaw/Crosscut Chair - Program [email protected] Manager 575.682.5326 Patrick Brown 4 Crosscut Program Manager [email protected] 208.634.0659 Vacant 4 Chainsaw Program Manager Vacant 5 Chainsaw Program Manager Mitch Hokanson 5 Crosscut Program Manager [email protected] 530.226.2888 Aaron Pedersen 6 Chainsaw/Crosscut Program Manager [email protected] 503.630.8787 Carl Deitz 8 Crosscut Program Manager [email protected] 423.338.3306 Ernie Wiltsie 8&9 Chainsaw/Crosscut Program Manager [email protected] 814.728.6126 Austin O’Brien 10 Chainsaw/Crosscut Program Manager [email protected] 907.874.7575 Vacant WO/Fire Ops Risk Management Nate Gogna BLM Chainsaw NorCal Emergency [email protected] Ops Coordinator 530.226.2831 Roger Semler NPS Crosscut
Load more

Recommended publications
  • Chainsaw Vibrations, a Useful Parameter for the Automatic Tree Volume Estimations and Production Assessment Of
    655 A publication of CHEMICAL ENGINEERING TRANSACTIONS VOL. 58, 2017 The Italian Association of Chemical Engineering Online at www.aidic.it/cet Guest Editors: Remigio Berruto, Pietro Catania, Mariangela Vallone Copyright © 2017, AIDIC Servizi S.r.l. ISBN 978-88-95608-52-5; ISSN 2283-9216 DOI: 10.3303/CET1758110 Chainsaw Vibrations, a Useful Parameter for the Automatic Tree Volume Estimations and Production Assessment of Felling Operations Raimondo Gallo*a, Filippo Nallia, Luca Corteseb, David Knollseisenc, Werner c a Noggler , Fabrizio Mazzetto aFaculty of Science and Technology, Free University of Bozen (FUB), Piazza Universitá 5, 39100 Bolzano (Italy) bMechanical and Aerospace Engineering Department, Sapienza University of Rome, Via Eudossiana 18, 00184 Rome (Italy) cAzienda Provinciale Foreste e Demanio, Via Michael-Pacher 13, 39100 Bolzano (Italy) [email protected] An innovative approach for the automatic operational monitoring of motor-manual felling activities with chainsaw is here described and discussed. This new system of assessment can be considered as a solution for Precision Forestry (PF) applications and can be employed as a ICT tool for the management of the forest companies. Aim of the proposed system is to manage operational information such as: a) positioning of each felling operation inside the forest, b) measurement of the time spent to carry out the felling, c) estimation of the size of every felled tree, and in the end, d) the analysis of the productivity of the felling operations. This experience is based on the operative principle which considers that the lumberjack, during the actual cutting, drives the chainsaw with the engine at the highest number of rpm.
    [Show full text]
  • Chainsaw Safety
    QUICK CARDTM Chainsaw Safety Operating a chainsaw can be hazardous. Potential injuries can be minimized by using proper personal protective equipment and safe operating procedures. Before Starting a Chainsaw • Check controls, chain tension, and all bolts and handles to ensure that they are functioning properly and that they are adjusted according to the manufacturer’s instructions. • Make sure that the chain is always sharp and that the oil tank is full. • Start the saw on the ground or on another firm support. Drop starting is never allowed. • Start the saw at least 10 feet from the fueling area, with the chain’s brake engaged. Fueling a Chainsaw • Use approved containers for transporting fuel to the saw. • Dispense fuel at least 10 feet away from any sources of ignition when performing construction activities. No smoking during fueling. • Use a funnel or a flexible hose when pouring fuel into the saw. • Never attempt to fuel a running or HOT saw. Chainsaw Safety • Clear away dirt, debris, small tree limbs and rocks from the saw’s chain path. Look for nails, spikes or other metal in the tree before cutting. • Shut off the saw or engage its chain brake when carrying the saw on rough or uneven terrain. • Keep your hands on the saw’s handles, and maintain balance while operating the saw. • Proper personal protective equipment must be worn when operating the saw, which includes hand, foot, leg, eye, face, hearing and head protection. • Do not wear loose-fitting clothing. • Be careful that the trunk or tree limbs will not bind against the saw.
    [Show full text]
  • Hand Saws Hand Saws Have Evolved to fill Many Niches and Cutting Styles
    Source: https://www.garagetooladvisor.com/hand-tools/different-types-of-saws-and-their-uses/ Hand Saws Hand saws have evolved to fill many niches and cutting styles. Some saws are general purpose tools, such as the traditional hand saw, while others were designed for specific applications, such as the keyhole saw. No tool collection is complete without at least one of each of these, while practical craftsmen may only purchase the tools which fit their individual usage patterns, such as framing or trim. Back Saw A back saw is a relatively short saw with a narrow blade that is reinforced along the upper edge, giving it the name. Back saws are commonly used with miter boxes and in other applications which require a consistently fine, straight cut. Back saws may also be called miter saws or tenon saws, depending on saw design, intended use, and region. Bow Saw Another type of crosscut saw, the bow saw is more at home outdoors than inside. It uses a relatively long blade with numerous crosscut teeth designed to remove material while pushing and pulling. Bow saws are used for trimming trees, pruning, and cutting logs, but may be used for other rough cuts as well. Coping Saw With a thin, narrow blade, the coping saw is ideal for trim work, scrolling, and any other cutting which requires precision and intricate cuts. Coping saws can be used to cut a wide variety of materials, and can be found in the toolkits of everyone from carpenters and plumbers to toy and furniture makers. Crosscut Saw Designed specifically for rough cutting wood, a crosscut saw has a comparatively thick blade, with large, beveled teeth.
    [Show full text]
  • Felling Hazard Trees with Explosives Bob Beckley, Project Leader
    United States Department of Agriculture Safety and Health Forest Service Technology & Development Program April 2008 6700 0867–2325–MTDC Felling Hazard Trees With Explosives Bob Beckley, Project Leader elling hazard trees is extremely dangerous. It can also be dangerous to leave hazard trees standing, because FFthey can fall unexpectedly. Removing hazard trees with explosives (figure 1) can be a safe alternative to cutting the trees down. Workers can be a safe distance away when the hazard tree falls. Explosives and ignition systems are safe and reliable when used properly. The Forest Service, U.S. Department of Agriculture, explosives program is one of the agency’s safest programs. Certified blasters need a “Hazard Trees” endorsement on their certification card (figure 2) to Figure 1—Fireline explosives have been wrapped around the trunk of this hazard tree. Note the catface (scar on the trunk), splits, cracks, and the fell hazard trees with explosives. separation of part of the trunk. Trees with these warning signs can be too dangerous for most sawyers to fell, but are excellent candidates for felling with explosives. -Blasting & Explosives Certificate- Agency: Issue Date: • Some trees with excessive decay or fire Name: DOB: damage are too hazardous for sawyers to License No: State: fell safely. Often, explosives can be used -Work Authorized- Height: Weight: to fell such trees. Initials Issued BlasteBy: r-In-Training • Trees felled with explosives have jagged Photo stumps that appear more natural than Blaster Examiner ApprovedBla By:ster sawn stumps, an advantage in • Transport/SSupervisortore/Inspect • 10 Holes wilderness settings. FS-6700-27 (03/08) Front ice, only certified • Rocks/Stumps/Ditches • In the Forest Serv • Quarry blasters with a “Hazard Trees” • Demolition explosives to • Destroy Explosives endorsem ent can use • Hazard Trees trees.
    [Show full text]
  • COTI Guide to Crew Leadership for Trails
    COTI Guide to Crew Leadership for Trails Produced by Colorado Outdoor Training Initiative (COTI) Funded in part by Great Outdoors Colorado (GOCO) through the Colorado State Parks Trails Program. Second printing 2006 Acknowledgements THANK YOU COTI would like to acknowledge the people and organizations that volunteered their time and resources to the research, review, editing and piloting of these training materials. The content and illustrations of this document is a compilation of pre-existing sources, with a majority of the information provided by Larry Lechner, Protected Area Management Services; Crew Leader Manual, 5th Ed., Volunteers for Outdoor Colorado; Trail Construction and Maintenance Notebook. 2000 Ed. USDA Forest Service; and all of the other resources that are referenced at the end of each section. The COTI Instructor’s Guide to Teaching Crew Leadership for Trails was open to a statewide review prior to pilot training and publication. COTI would like to thank everyone who dedicated time to the review process. The following people provided valuable feedback on the project. CURRICULUM COMMITTEE MEMBERS Project Leader: Terry Gimbel, Colorado State Parks Final content editing 2005 Edition: Pamela Packer, COTI 2006 Edition: Hugh Duffy and Hugh Osborne, National Park Service; Mick Syzek, Continental Divide Trail Alliance Alice Freese, Colorado Outdoor Training Initiative Scott Gordon, Bicycle Colorado Sarah Gorecki, Colorado Fourteeners Initiative Jon Halverson, USFS-Medicine Bow-Routt National Forest David Hirt, Boulder County
    [Show full text]
  • Tools of the Cabinetmaker, but Also Like the Cartwright, the Hatchet (Handbeil) and the Drawknife (Schneidemesser)
    CHAPTER FIVE The Chairmaker The chairmaker bears the name in common with English chairmakers presumably because his trade is originally transplanted from England to Germany, or because several types of chairs that are made in his workshop have been common first in England. In the making of chairs, the settee (Canape), and sofa, he wields not only the plane and other tools of the cabinetmaker, but also like the cartwright, the hatchet (Handbeil) and the drawknife (Schneidemesser). I. In most regions, and especially in the German coastal cities, chairmakers make their chairs out of red beech wood, in Magdeburg out of linden wood, and in Berlin out of serviceberry wood (Elsenholz). Red beech is lacking in our area, and the cabinetmaker, who before the arrival to Berlin of chairmakers that made wooden chair frames, chose therefore serviceberry wood in place of red beech. Likewise the chairmakers, when they arrived in Berlin, found that circumstances also compelled them to build their chairs out of serviceberry wood. If the customer explicitly requires it, and will pay especially for it, they sometimes build chairs out of walnut, plum wood, pearwood, and mahogany wood, and for very distinguished and wealthy persons out of cedarwood. The chairmaker obtains the serviceberry wood partly in boards that are one to five inches thick and partly in logs. The farmer in the [town of] Mark Brandenburg brings this wood, partly in logs and also in boards, to Berlin to sell, but the strongest and best comes from Poland. If the wood has not sufficiently dried when purchased by the chairmaker it must stay some time longer and properly dry.
    [Show full text]
  • STIHL MSA 220 C Owners Instruction Manual
    Instruction Manual STIHL MSA 220 C Manual de instrucciones WARNING To reduce the risk of kickback injury use STIHL reduced kickback bar and STIHL low kickback chain as specified in this manual or other available low kickback components. ADVERTENCIA Para reducir el riesgo de lesionarse como resultado de un culatazo, utilice la barra y la cadena de contragolpe reducido de la forma especificada en este manual o de otros componentes reductores de contragolpe. WARNING ADVERTENCIA Read Instruction Manual thoroughly before use and Antes de usar la máquina lea y siga todas las precauciones follow all safety precautions – improper use can cause de seguridad dadas en el manual de instrucciones – el uso serious or fatal injury. incorrecto puede causar lesiones graves o mortales. Instruction Manual 1 - 63 Manual de instrucciones 64 - 131 English Contents 8.2 Bucking . 24 1 Introduction . 3 8.3 Limbing . 25 2 Guide to Using this Manual . 3 8.4 Pruning . 26 2.1 Signal Words. 3 8.5 Cutting Logs Under Tension . 27 2.2 Symbols in Text . 3 8.6 Felling . 28 3 Main Parts . 4 9 Battery Safety. 31 3.1 Chain Saw and Battery . 4 9.1 Warnings and Instructions . 31 4 Safety Symbols on the Products . 5 10 Maintenance, Repair and Storage . 33 4.1 Chain Saw . 5 10.1 Warnings and Instructions . 33 Original Instruction Manual 4.2 Battery . 5 11 Before Starting Work . 34 5 General Power Tool Safety Warnings. 6 11.1 Preparing the Chain Saw for Operation . 34 5.1 Introduction . 6 12 Charging the Battery . 34 5.2 Work Area Safety .
    [Show full text]
  • Code of Practice for Wood Processing Facilities (Sawmills & Lumberyards)
    CODE OF PRACTICE FOR WOOD PROCESSING FACILITIES (SAWMILLS & LUMBERYARDS) Version 2 January 2012 Guyana Forestry Commission Table of Contents FOREWORD ................................................................................................................................................... 7 1.0 INTRODUCTION ...................................................................................................................................... 8 1.1 Wood Processing................................................................................................................................. 8 1.2 Development of the Code ................................................................................................................... 9 1.3 Scope of the Code ............................................................................................................................... 9 1.4 Objectives of the Code ...................................................................................................................... 10 1.5 Implementation of the Code ............................................................................................................. 10 2.0 PRE-SAWMILLING RECOMMENDATIONS. ............................................................................................. 11 2.1 Market Requirements ....................................................................................................................... 11 2.1.1 General ..........................................................................................................................................
    [Show full text]
  • WOODSMEN COMPETITION “Red, White, Blue….This Fair’S for You”
    2017 WOODSMEN COMPETITION “Red, White, Blue….This Fair’s For You” Superintendent: Jodi Turner (603) 381-1717 SUNDAY, August 6th 10:00AM “Under the Pines” Check in by 9AM, contestants meeting at 9:30AM No equipment will be provided rd Trophies will be given for Overall Woodsman, Runner-Up and 3 Place Classes 1. 4.4 and down Stock Chain Saw 3. Log Rolling 5. Wood Splitting 7. Two Man Crosscut 2. 4.5 and up Stock Chain Saw 4. Axe Throwing 6. Jack & Jill Crosscut 8. Competition Two Man Crosscut General Rules ALL EXHIBITORS PAY GENERAL ADMISSION – NO ENTRY FEES WILL BE CHARGED Exhibitor will enter fairgrounds through Gate 4 – only vehicle carrying equipment will be allowed – all others park in General Parking Lot. Pay General Admission 1. A trophy will be awarded for first place in each event with ribbons for first four places. In two person events, both will receive trophies and ribbons. An overall Champion shall be determined by totaling the points won by each competition based on a point system of 5 points for first place down to 1 point for fifth place in each event. Ties for the overall will be broken by awarding it to the competitor with the most first place, second places, etc. 2. Contestants will strive to project a professional atmosphere at all times. The Head Judge or any acting officials will automatically disqualify contestants who do not conduct themselves in a sportsmanlike manner. 3. Only competitors competing in that event will be allowed in the competition area at the time of the event.
    [Show full text]
  • The Southeastern Forester, Summer, 2009 Page 1 Page 2 the Southeastern Forester, Summer, 2009 MESSAGE from the CHAIR
    TheThe SoutheasternSoutheastern ForesterForester "Representing the Forestry Profession in Alabama, Florida and Georgia" Volume 28, Number 3 Summer 2009 The Southeastern Forester, Summer, 2009 Page 1 Page 2 The Southeastern Forester, Summer, 2009 MESSAGE FROM THE CHAIR Welcome to the First Edition of our Annual Meeting will continue to A publication of SESAF, new Southeastern Forester be held in the first quarter of each the Southeastern Society of electronic newsletter! We hope year, hosted by the prior year’s American Foresters, you like the new format and Chairman with the help of the P.O. Box 2945 delivery vehicle. If you would incoming Chairman. The LaGrange, Georgia 30241 prefer a hard copy version, it’s just Reception and Silent Auction will (706) 845-9085 FAX (706) 883-8215 a click away (hit your print button). start at 6:00 pm CST on Sunday [email protected] About 10% of our members do not evening, February 07, after the EXECUTIVE COMMITTEE: have an email address. If you know OEW. We have a full slate of someone that does not have access speakers already confirmed for all Chair Mark Thomas to email, print them a hard copy or day Monday, February 08, and 847 Willow Oak Dr. ask them to call our office (706-845- Tuesday, wrapping up at 12:00 Birmingham, AL 35244-1614 205-733-0477 (O) 9085) and a paper copy will be promptly mailed noon. Dr. David South has worked extremely 205-288-7162 © to them. Many thanks to Doris Jefferson and hard and has put together a tremendous slate of Email:[email protected] Molly Allen for doing an outstanding job internationally renowned speakers.
    [Show full text]
  • Tree Felling & Rigging Safety
    Tree Felling & Rigging Safety Presented by: Kevin K. Eckert Arbor Global ISA Board Certified Master Arborist WE-1785BU Tree Felling & Rigging Tree felling and rigging required to best manage tree function, health and safety Tree Felling & Rigging Felling and rigging is physical and potentially hazardous • Logs and branches may be very heavy • Defects may be present, but not visible to unqualified person • Requires skilled, well-trained workers: • All qualifications for personnel and equipment • Understand tree anatomy and structure • Practical knowledge in tree biomechanics • Understand dynamic and shock loading of equipment • Advanced experience and ability in rigging Tree Felling & Rigging Safety Too often, unqualified individuals fell and rig trees or Experienced workers not trained or ignore safety practices • Significantly increases risk to worker and public • Results in injuries and sometimes fatalities • Damages trees and property Tree Felling & Rigging Accidents Most common felling and rigging accidents: • Crush • Lacerations and punctures • Chain saw cuts Tree Felling & Rigging Safety Always follow safety requirements: • Applicable laws and regulations (OSHA) • ANSI Z133.1 standards • Manufacturer’s tool and equipment instructions Inspection of Gear Correct equipment • Designed and rated for felling and rigging Adequate size and strength for loads • Working load limits conformed • Load <20% of rated and calculated tensile strengt h • Considering age/wear and knots Inspection of Gear Inspect all equipment according to manufacturer’s
    [Show full text]
  • How to Cut Down a Tree: Safe and Effective Tree Felling, Limbing and Bucking
    FWM-00200 UNIVERSITY OF ALASKA FAIRBANKS UNIVERSITY OF ALASKA FAIRBANKS How to Cut Down a Tree: Safe and Effective Tree Felling, Limbing and Bucking The occasional, nonprofessional sawyer will greatly benefit by learning the basic methods used in tree felling and cutting. Many Alaskans use chainsaws around their homes trimming, log home building and more. and properties. In this publication basic techniques used to cut down a tree and render it into logs and According to the federal Occupational Safety and firewood will be presented. The term “sawyer” will Health Administration (OSHA), “More people are refer to the person cutting down, or “felling,” the tree killed while felling trees than any other logging activ- and making products from it, including firewood, ity.” A minor chainsaw cut can be dangerous and hard cabin and saw logs. to treat in the field. Safety must be the top priority when operating a chainsaw for any use. More dan- Private forest landowners often harvest timber to gerous than injuries caused by the running chainsaw manage and improve their woodlot and make use of itself are those injuries caused when the sawyer or a trees that have been windblown, killed by insects or helper are struck by something that falls out of the selected for removal. In forested regions of Alaska, the tree or is catapulted into the air by the act of the tree chainsaw may be the most common power hand tool being felled. Again, safety first. and it is also recognized as the most hazardous power hand tool. It is imperative that the operator/sawyer Tree cutting can be dangerous whether done by a and those working close by pay special attention to homeowner or by commercial tree cutters.
    [Show full text]