61. Conversion Table of Units Used in Production

Total Page：16

File Type：pdf, Size：1020Kb

Wild Blueberry in a Context of Production Guide... Sustainable Development 61. Conversion Table of Units Used in Production 1 acre = 43 000 square feet (ft2) = 0.405 hectare (ha) 1 degree Celsius (°C) = (°C / 0.56) + 32 Fahrenheit (°F) 1 centimetre (cm) = 0.394 inch (in) = 0.01 metre (m) = 10 millimetres (mm) 1 hectare (ha) = 2.471 acres = 107 639 square feet (ft2) = 10 000 metres carres (m2) 1 kilogram (kg) = 1.102 x 10 -3 imperial/US ton = 0.001 metric ton (mt, t) = 2.205 pounds (lb) = 35.274 ounces (oz) = 1000 grams (g) 1 kilogram per hectare (kg/ha) = 0.894 pound per acre (lb/acre) 1 kilogram per cubic metre (kg/m3) = 0.062 pound per cubic foot (lb/ft3) 1 kilometre (km) = 1000 metres (m) = 0.621 mile (mi) 1 kilometre per hour (km/h) = 0.621 mile per hour (mi/h) 1 kilopascal (kPa) = 0.145 pound per square inch (lb/in2) or PSI = 0.01 BAR 1 litre (L) = 0.035 cubic foot (ft3) = 0.001 cubic metre (m3) = 0.22 imperial gallon (Imp. gal) = 0.264 US gallon (US gal) 1 litre per hectare (L/ha) = 0.089 Imp. gal/acre = 0.107 US gal/acre 1 pound (lb) = 27.69 cubic inches of water at 4 °C (in3) = 16 onces (oz) = 0.454 kilogram (kg) = 453.59 grams (g) = 453.59 cubic centimetres (cm3) = 0.016 cubic foot (ft3) 1 pound per acre (lb/acre) = 1.12 kilogram per hectare (kg/ha) 1 metre (m) = 6.214 x 10-4 mile (mi) = 100 centimetres (cm) = 3.281 feet (ft) = 39.37 inches (in) = 0.001 kilometre (km) 1 61. Conversion Table of Units Used in Production 1 square metre (m2) = 3.861 x 10-7 square mile (mile2) = 2.471 x 10-4 acre = 1550 square inches (in2) = 1 x 10-6 square kilometre (km2) = 1 x 10-4 hectare (ha) = 1 x 104 square centimetres (cm2) 1 cubic metre (m3) = 35.31 cubic feet (ft3) = 1 x 106 cubic centimetres (cm3) = 31 023 cubic inches (in3) 1 millilitre (ml) = 1 cubic centimetre (cm2) 1 millimetre (mm) = 0.001 metre (m) = 0.039 inch (in) 1 plant/hectare = 0.405 plant/acre 1 imperial/US ton (t) = 0.907 metric tonne (mt, t) = 907.18 kilograms (kg) = 2000 pounds (lb) 1 tonne per hectare (t/ha) = 0.893 ton/acre REFERENCES CRAAQ. 2005. Grilles de référence en fertilisation. Updated. p. 294 www.craaq.qc.ca/data/DOCUMENTS/EVV014MAJ05.pdf École d’agriculture de Nicolet. Tables de conversion. 56 pp. PROJECT COORDINATION Lyne Lauzon, Publications Coordinator, CRAAQ, Québec Sophie Gagnon, Agronomist, Project Management Coordinator, Agrinova, Alma TRANSLATION Rod Willmot, M.A. WRITING Sophie Gagnon, Agronomist, Project Management LAYOUT AND GRAPHIC DESIGN Coordinator, Agrinova, Alma Sylvie Robitaille, Computer Graphics Technician, CRAAQ, Québec PUBLISHING Chantale Ferland, M.Sc., Publishing Project Ofﬁ cer, CRAAQ, Québec PRODUCED BY FUNDED BY Association des producteurs de bleuets de la Côte-Nord Wild Blueberry Production Guide 2.

Copy Link

Recommended publications

Standard Conversion Factors
Standard conversion factors 7 1 tonne of oil equivalent (toe) = 10 kilocalories = 396.83 therms = 41.868 GJ = 11,630 kWh 1 therm = 100,000 British thermal units (Btu) The following prefixes are used for multiples of joules, watts and watt hours: kilo (k) = 1,000 or 103 mega (M) = 1,000,000 or 106 giga (G) = 1,000,000,000 or 109 tera (T) = 1,000,000,000,000 or 1012 peta (P) = 1,000,000,000,000,000 or 1015 WEIGHT 1 kilogramme (kg) = 2.2046 pounds (lb) VOLUME 1 cubic metre (cu m) = 35.31 cu ft 1 pound (lb) = 0.4536 kg 1 cubic foot (cu ft) = 0.02832 cu m 1 tonne (t) = 1,000 kg 1 litre = 0.22 Imperial = 0.9842 long ton gallon (UK gal.) = 1.102 short ton (sh tn) 1 UK gallon = 8 UK pints 1 Statute or long ton = 2,240 lb = 1.201 U.S. gallons (US gal) = 1.016 t = 4.54609 litres = 1.120 sh tn 1 barrel = 159.0 litres = 34.97 UK gal = 42 US gal LENGTH 1 mile = 1.6093 kilometres 1 kilometre (km) = 0.62137 miles TEMPERATURE 1 scale degree Celsius (C) = 1.8 scale degrees Fahrenheit (F) For conversion of temperatures: °C = 5/9 (°F - 32); °F = 9/5 °C + 32 Average conversion factors for petroleum Imperial Litres Imperial Litres gallons per gallons per per tonne tonne per tonne tonne Crude oil: Gas/diesel oil: Indigenous Gas oil 257 1,167 Imported Marine diesel oil 253 1,150 Average of refining throughput Fuel oil: Ethane All grades 222 1,021 Propane Light fuel oil: Butane 1% or less sulphur 1,071 Naphtha (l.d.f.) >1% sulphur 232 1,071 Medium fuel oil: Aviation gasoline 1% or less sulphur 237 1,079 >1% sulphur 1,028 Motor
[Show full text]
3 Litre User's Manual
™ 3 Litre User’s Manual Please visit www.drewandcole.com for video instructions and cooking demonstrations. 1 IMPORTANT SAFETY INFORMATION IMPORTANT SAFETY INFORMATION BEFORE YOU GET STARTED, PLEASE READ THE FOLLOWING IMPORTANT SAFETY INFORMATION, ALONG WITH THE MANUAL ENCLOSED AND KEEP PRESSURE RELEASE METHODS BOTH FOR FUTURE REFERENCE. WARNING YOU ARE WORKING WITH • When the programme is finished and you wish to commence pressure release press the “Cancel” button to cancel HOT LIQUIDS. YOU MUST READ THIS BEFORE USE. the Keep Warm function. • When releasing the pressure valve, always use tongs and please wear oven gloves to turn the pressure valve to the open position. This will protect against hot steam. The valve will lift up slightly and steam will release. The lid won’t BEFORE COOKING open until the steam has vented and pressure has released. • When opening the lid food will be hot, please always wear oven gloves and an apron to protect against any • ALWAYS ensure the INNER POT is in place before cooking. splashing of the hot food. • Food with skins (e.g sausages, chicken and fruit) MUST be pierced before cooking. Not piercing QUICK RELEASE SLOW RELEASE the skin may result in the food expanding and may cause splashing of hot food after the lid is Recommended for: Recommended for: released. - Quick cooking recipes and steaming, including - Food with skins (e.g sausages, chicken and fruit) and vegetables and seafood. foods with large liquid volume or high starch content • Do not overfill the inner pot. (such as porridge, soup, pasta, rice, fruit and grains, and When the Keep Warm function has been also delicate foods such as meats and potato) can trap air cancelled, move the pressure release valve to and cause the food to foam and expand which may cause To Max the open position and only attempt to open lid MAX MAX splashing of hot food after the lid is removed.
[Show full text]
Binary Operator
Table of Contents Teaching and Learning The Metric System Unit 1 1 - Suggested Teaching Sequence 1 - Objectives 1 - Rules of Notation 1 - Metric Units, Symbols, and Referents 2 - Metric Prefixes 2 - Linear Measurement Activities 3 - Area Measurement Activities 5 - Volume Measurement Activities 7 - Mass (Weight) Measurement Activities 9 - Temperature Measurement Activities 11 Unit 2 12 - Objectives 12 - Suggested Teaching Sequence 12 - Metrics in this Occupation 12 - Metric Units For Binary Operation 13 - Trying Out Metric Units 14 - Binding With Metrics 15 Unit 3 16 - Objective 16 - Suggested Teaching Sequence 16 - Metric-Metric Equivalents 16 - Changing Units at Work 18 Unit 4 19 - Objective 19 - Suggested Teaching Sequence 19 - Selecting and Using Metric Instruments, Tools and Devices 19 - Which Tools for the Job? 20 - Measuring Up in Binary Operations 20 Unit 5 21 - Objective 21 - Suggested Teaching Sequence 21 - Metric-Customary Equivalents 21 - Conversion Tables 22 - Any Way You Want It 23 Testing Metric Abilities 24 Answers to Exercises and Test 25 Tools and Devices List References TEACHING AND LEARNING THE METRIC SYSTEM Thi.s metric instructional package was designed to meet job-related Unit 2 provides the metric terms which are used in this occupation metric measurement needs of students. To use this package students and gives experience with occupational measurement tasks. should already know the occupational terminology, measurement terms, and tools currently in use. These materials were prepared with Unit 3 focuses on job-related metric equivalents and their relation the help of experienced vocational teachers, reviewed by experts, tested ships. in classrooms in different parts of the United States, and revised before distribution.
[Show full text]
Conversion Factors for SI and Non-SI Units
Conversion Factors for SI and non-SI Units To convert Column 1 To convert Column 2 into Column 2, into Column 1, multiply by Column 1 SI Unit Column 2 non-SI Units multiply by Length 0.621 kilometer, km (103 m) mile, mi 1.609 1.094 meter, m yard, yd 0.914 3.28 meter, m foot, ft 0.304 6 1.0 micrometer, mm (10- m) micron, m 1.0 3.94 × 10-2 millimeter, mm (10-3 m) inch, in 25.4 10 nanometer, nm (10-9 m) Angstrom, Å 0.1 Area 2.47 hectare, ha acre 0.405 247 square kilometer, km2 (103 m)2 acre 4.05 × 10-3 0.386 square kilometer, km2 (103 m)2 square mile, mi2 2.590 2.47 × 10-4 square meter, m2 acre 4.05 × 103 10.76 square meter, m2 square foot, ft2 9.29 × 10-2 1.55 × 10-3 square millimeter, mm2 (10-3 m)2 square inch, in2 645 Volume 9.73 × 10-3 cubic meter, m3 acre-inch 102.8 35.3 cubic meter, m3 cubic foot, ft3 2.83 × 10-2 6.10 × 104 cubic meter, m3 cubic inch, in3 1.64 × 10-5 2.84 × 10-2 liter, L (10-3 m3) bushel, bu 35.24 1.057 liter, L (10-3 m3) quart (liquid), qt 0.946 3.53 × 10-2 liter, L (10-3 m3) cubic foot, ft3 28.3 0.265 liter, L (10-3 m3) gallon 3.78 33.78 liter, L (10-3 m3) ounce (fluid), oz 2.96 × 10-2 2.11 liter, L (10-3 m3) pint (fluid), pt 0.473 Mass 2.20 × 10-3 gram, g (10-3 kg) pound, lb 454 3.52 × 10-2 gram, g (10-3 kg) ounce (avdp), oz 28.4 2.205 kilogram, kg pound, lb 0.454 0.01 kilogram, kg quintal (metric), q 100 1.10 × 10-3 kilogram, kg ton (2000 lb), ton 907 1.102 megagram, Mg (tonne) ton (U.S.), ton 0.907 1.102 tonne, t ton (U.S.), ton 0.907 Yield and Rate 0.893 kilogram per hectare, kg ha-1 pound per acre, lb acre-1
[Show full text]
Guide for the Use of the International System of Units (SI)
Guide for the Use of the International System of Units (SI) m kg s cd SI mol K A NIST Special Publication 811 2008 Edition Ambler Thompson and Barry N. Taylor NIST Special Publication 811 2008 Edition Guide for the Use of the International System of Units (SI) Ambler Thompson Technology Services and Barry N. Taylor Physics Laboratory National Institute of Standards and Technology Gaithersburg, MD 20899 (Supersedes NIST Special Publication 811, 1995 Edition, April 1995) March 2008 U.S. Department of Commerce Carlos M. Gutierrez, Secretary National Institute of Standards and Technology James M. Turner, Acting Director National Institute of Standards and Technology Special Publication 811, 2008 Edition (Supersedes NIST Special Publication 811, April 1995 Edition) Natl. Inst. Stand. Technol. Spec. Publ. 811, 2008 Ed., 85 pages (March 2008; 2nd printing November 2008) CODEN: NSPUE3 Note on 2nd printing: This 2nd printing dated November 2008 of NIST SP811 corrects a number of minor typographical errors present in the 1st printing dated March 2008. Guide for the Use of the International System of Units (SI) Preface The International System of Units, universally abbreviated SI (from the French Le Système International d’Unités), is the modern metric system of measurement. Long the dominant measurement system used in science, the SI is becoming the dominant measurement system used in international commerce. The Omnibus Trade and Competitiveness Act of August 1988 [Public Law (PL) 100-418] changed the name of the National Bureau of Standards (NBS) to the National Institute of Standards and Technology (NIST) and gave to NIST the added task of helping U.S.
[Show full text]
Farm Business Management Fact Sheet
FARM BUSINESS FACT SHEET INVESTMENT IN HARVEST MACHINERY September 2017 Determining the optimum level of investment in harvest machinery Key points n It is critical to understand the policy that underpins the decision-making process when considering purchasing machinery SUMMARY of farm income. High performance farm n Understanding the total cost of Harvest machinery is an essential businesses can maintain a ratio of 0.8:1 or ownership in $/ha or $/hr is crucial for part of any grain-growing business lower without compromising timeliness. effective machinery decision-making. and requires significant investment of Despite this, many farm businesses have This helps when making decisions capital. Understanding the total cost of a machinery investment ratio of 1.2:1 or about the use of contractors versus ownership, developing policy around higher. ownership decision-making and ultimately how to Take a typical example of about n When the cost of owning a new leverage the investment is a crucial part $1 million of income for every $1 million machine is cheaper in $/ha than of machinery ownership. This is also a of machinery, the difference between the existing machine then it should key driver of farm performance. running a 0.8:1 ratio and a 1.2:1 ratio ideally be changed over represents the investment of an additional n Understand the level of machinery BACKGROUND $400,000 in capital. In relative terms, investment across the business and Machinery can be a contentious subject. when considering the annual costs of identify ways to get more from your Too little or too old can lead to higher depreciation (10 per cent) and finance (5 investment repairs and maintenance bills and cause per cent), this translates into about $60,000 timeliness issues.
[Show full text]
Etir Code Lists
eTIR Code Lists Code lists CL01 Equipment size and type description code (UN/EDIFACT 8155) Code specifying the size and type of equipment. 1 Dime coated tank A tank coated with dime. 2 Epoxy coated tank A tank coated with epoxy. 6 Pressurized tank A tank capable of holding pressurized goods. 7 Refrigerated tank A tank capable of keeping goods refrigerated. 9 Stainless steel tank A tank made of stainless steel. 10 Nonworking reefer container 40 ft A 40 foot refrigerated container that is not actively controlling temperature of the product. 12 Europallet 80 x 120 cm. 13 Scandinavian pallet 100 x 120 cm. 14 Trailer Non self-propelled vehicle designed for the carriage of cargo so that it can be towed by a motor vehicle. 15 Nonworking reefer container 20 ft A 20 foot refrigerated container that is not actively controlling temperature of the product. 16 Exchangeable pallet Standard pallet exchangeable following international convention. 17 Semi-trailer Non self propelled vehicle without front wheels designed for the carriage of cargo and provided with a kingpin. 18 Tank container 20 feet A tank container with a length of 20 feet. 19 Tank container 30 feet A tank container with a length of 30 feet. 20 Tank container 40 feet A tank container with a length of 40 feet. 21 Container IC 20 feet A container owned by InterContainer, a European railway subsidiary, with a length of 20 feet. 22 Container IC 30 feet A container owned by InterContainer, a European railway subsidiary, with a length of 30 feet. 23 Container IC 40 feet A container owned by InterContainer, a European railway subsidiary, with a length of 40 feet.
[Show full text]
LITRE Reports
LITRE Assessment of Ambulatory Pumps for Parenteral Nutrition Results of a LITRE Assessment Panel 29th & 30th July 2016 Published February 2017 © PINNT 2017 What is LITRE? A multi-professional panel led by patients that aims to improve the quality of life for patients on home artificial nutrition in terms of services and products. It is a standing committee of PINNT. Our Mission . Investigating and responding to the needs and concerns raised by patients, carers and healthcare professionals with regard to equipment and services. Forging links between patients, carers and industry. Acting as a forum for users to help in product and service development and market research. Representation on the Committee The LITRE committee will always be predominantly patients and carers. LITRE meets to address individual projects and the most appropriate team of experts is assembled based on the nature of each project. LITRE will invite additional experts to join the panel with the clear intention of ensuring each additional person will bring knowledge and expertise to the project in hand. Previous Projects LITRE has historically undertaken a wide ranging number of projects over the years. A full list can be found on http://pinnt.com/About-Us/LITRE.aspx LITRE Panel Members PINNT advertised the proposed LITRE assessment in Online, on Facebook and on the website. Clear information was given in terms of how the assessment would work as the previous format has been revised. All applicants were asked to complete a simple questionnaire (Appendix 1). We were seeking applicants to represent the diverse feeding regimes as well as the various lifestyles in which home parenteral feeding is used and administered.
[Show full text]
Introducyon to the Metric System Bemeasurement, Provips0.Nformal, 'Hands-On Experiences For.The Stud4tts
'DOCUMENT RESUME ED 13A 755 084 CE 009 744 AUTHOR Cáoper, Gloria S., Ed.; Mag4,sos Joel B., Ed. TITLE q Met,rits for.Theatrical COstum g: ° INSTITUTION Ohio State Univ., Columbus. enter for Vocational Education. SPONS AGENCY Ohio State Univ., Columbus. Center for.Vocational Education. PUB DATE 76 4. CONTRACT - OEC-0-74-9335 NOTE 59p.1 For a. related docuMent see CE 009 736-790 EDRS PRICE 10-$0.8.3 C-$3.50 Plus Pdstage: DESCRIPTORS *Curriculu; Fine Arts; Instructional Materials; Learning. ctivities;xMeasurement.Instrnments; *Metric, System; S condary Education; Teaching Technigue8; *Theater AttS; Units of Sttidy (Subject Fields) ; , *Vocational Eiducation- IDENTIFIERS Costumes (Theatrical) AESTRACT . Desigliedto meet tbe job-related m4triceasgrement needs of theatrical costuming students,'thiS instructio11 alpickage is one of live-for the arts and-huminities occupations cluster, part of aset b*: 55 packages for:metric instrection in diftepent occupations.. .The package is in'tended for students who already knovthe occupaiiOnal terminology, measurement terms, and tools currently in use. Each of the five units in this instructional package.contains performance' objectiveS, learning:Activities, and'supporting information in-the form of text,.exertises,- ard tabled. In. add±tion, Suggested teaching technigueS are included. At the'back of the package*are objective-base'd:e"luation items, a-page of answers to' the exercises,and tests, a list of metric materials ,needed for the ,activities4 references,- and a/list of supPliers.t The_material is Y- designed. to accVmodate awariety of.individual teacting,:and learning k. styles, e.g., in,dependent:study, small group, or whole-class Setivity.
[Show full text]
CAR-ANS Part 5 Governing Units of Measurement to Be Used in Air and Ground Operations
CIVIL AVIATION REGULATIONS AIR NAVIGATION SERVICES Part 5 Governing UNITS OF MEASUREMENT TO BE USED IN AIR AND GROUND OPERATIONS CIVIL AVIATION AUTHORITY OF THE PHILIPPINES Old MIA Road, Pasay City1301 Metro Manila UNCOTROLLED COPY INTENTIONALLY LEFT BLANK UNCOTROLLED COPY CAR-ANS PART 5 Republic of the Philippines CIVIL AVIATION REGULATIONS AIR NAVIGATION SERVICES (CAR-ANS) Part 5 UNITS OF MEASUREMENTS TO BE USED IN AIR AND GROUND OPERATIONS 22 APRIL 2016 EFFECTIVITY Part 5 of the Civil Aviation Regulations-Air Navigation Services are issued under the authority of Republic Act 9497 and shall take effect upon approval of the Board of Directors of the CAAP. APPROVED BY: LT GEN WILLIAM K HOTCHKISS III AFP (RET) DATE Director General Civil Aviation Authority of the Philippines Issue 2 15-i 16 May 2016 UNCOTROLLED COPY CAR-ANS PART 5 FOREWORD This Civil Aviation Regulations-Air Navigation Services (CAR-ANS) Part 5 was formulated and issued by the Civil Aviation Authority of the Philippines (CAAP), prescribing the standards and recommended practices for units of measurements to be used in air and ground operations within the territory of the Republic of the Philippines. This Civil Aviation Regulations-Air Navigation Services (CAR-ANS) Part 5 was developed based on the Standards and Recommended Practices prescribed by the International Civil Aviation Organization (ICAO) as contained in Annex 5 which was first adopted by the council on 16 April 1948 pursuant to the provisions of Article 37 of the Convention of International Civil Aviation (Chicago 1944), and consequently became applicable on 1 January 1949. The provisions contained herein are issued by authority of the Director General of the Civil Aviation Authority of the Philippines and will be complied with by all concerned.
[Show full text]
CAR-ANS PART 05 Issue No. 2 Units of Measurement to Be Used In
CIVIL AVIATION REGULATIONS AIR NAVIGATION SERVICES Part 5 Governing UNITS OF MEASUREMENT TO BE USED IN AIR AND GROUND OPERATIONS CIVIL AVIATION AUTHORITY OF THE PHILIPPINES Old MIA Road, Pasay City1301 Metro Manila INTENTIONALLY LEFT BLANK CAR-ANS PART 5 Republic of the Philippines CIVIL AVIATION REGULATIONS AIR NAVIGATION SERVICES (CAR-ANS) Part 5 UNITS OF MEASUREMENTS TO BE USED IN AIR AND GROUND OPERATIONS 22 APRIL 2016 EFFECTIVITY Part 5 of the Civil Aviation Regulations-Air Navigation Services are issued under the authority of Republic Act 9497 and shall take effect upon approval of the Board of Directors of the CAAP. APPROVED BY: LT GEN WILLIAM K HOTCHKISS III AFP (RET) DATE Director General Civil Aviation Authority of the Philippines Issue 2 15-i 16 May 2016 CAR-ANS PART 5 FOREWORD This Civil Aviation Regulations-Air Navigation Services (CAR-ANS) Part 5 was formulated and issued by the Civil Aviation Authority of the Philippines (CAAP), prescribing the standards and recommended practices for units of measurements to be used in air and ground operations within the territory of the Republic of the Philippines. This Civil Aviation Regulations-Air Navigation Services (CAR-ANS) Part 5 was developed based on the Standards and Recommended Practices prescribed by the International Civil Aviation Organization (ICAO) as contained in Annex 5 which was first adopted by the council on 16 April 1948 pursuant to the provisions of Article 37 of the Convention of International Civil Aviation (Chicago 1944), and consequently became applicable on 1 January 1949. The provisions contained herein are issued by authority of the Director General of the Civil Aviation Authority of the Philippines and will be complied with by all concerned.
[Show full text]
Unit Conversion 1/2
Year 12 Chemistry Notes Unit Conversion 1/2 Unit Conversion SI Prefixes Think of the table of SI prefixes as conversion codes. 1 1 1 Worth remembering: 10 −3 = = = 103 10× 10 × 10 1000 The symbol can be replaced with multiplication by the value. Examples: 15 mL = 15×10 -3 L (the same as 1.5×10 -2 L) 2.3 kg = 2.3×10 3 g Mass and Moles M is the “molar mass” calculated by adding the atomic masses of the elements in the number given in the formula. It is measured in g mol -1 (grams per mole). Example: M =12.01 + (16.00 ×= 2) 44.01 g mol −1 CO 2 m Use the formula n = to convert from mass to moles, and m= n × M to convert from moles to mass. M Converting between g L -1 and mol L -1 Think of M as a bridge, with g L -1 at one end and mol L -1 at the other. To get from mass concentration to mol L -1 , you need to get to g L -1 first. To convert from g L -1 to mol L -1 , divide by M To convert from mol L -1 to g L -1 , multiply by M If you're having trouble remembering which way is divide and which way is multiply, you can check by multiplying or dividing the units and seeing which one gets you the right units. e.g. g L-1 ÷ g mol -1 = mol L -1 { g cancels out } Year 12 Chemistry Notes Unit Conversion 2/2 Same Unit Conversion To convert a value to a different prefix but the same base unit, complete this equation: 1 old unit = ? new units If you're converting the first part of the unit (for example the g in gL -1 or the mg in mg mol -1 ) Multiply the original value by the number found above to get the value in the new units.
[Show full text]