DOCSLIB.ORG

AH JUST ASK RENTAL.Xlsx

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
AH JUST ASK RENTAL.Xlsx Quant HEADING 2 brand/model # ITEM DESCRIPTION Price ity Air Compressor Electric 1.5 AIR COMPRESSORS Airmate by Emglow (twin tank) 1 29101 ($ 100.00) HP 4 Gallon AUTOMOTIVE CTA4030 1 1 Coil Spring Compressor ($ 17.00) AUTOMOTIVE CTA4030 1 1 Coil Spring Compressor ($ 17.00) AUTOMOTIVE CTA4300 1 61601 Front Wheel Hub Puller ($ 12.00) AUTOMOTIVE CTA2310 1 61801 Engine Cylinder Hone ($ 12.00) AUTOMOTIVE CTA1515 1 62401 Steering Wheel Puller ($ 15.00) AUTOMOTIVE CTA1515 1 62401 Steering Wheel Puller ($ 15.00) C Clamp Valve Spring AUTOMOTIVE CTA2225 1 62601 ($ 12.00) Compressor AUTOMOTIVE CTA2236 1 62801 Harmonic Balance Puller ($ 12.00) AUTOMOTIVE CTA2236 1 62801 Harmonic Balance Puller ($ 12.00) AUTOMOTIVE MacPherson 4035 1 63201 McPherson Strut Tool ($ 22.00) AUTOMOTIVE MacPherson 4035 1 63201 McPherson Strut Tool ($ 22.00) AUTOMOTIVE MacPherson 4035 1 63201 McPherson Strut Tool ($ 22.00) AUTOMOTIVE CTA4310 1 63401 Flange Type Axe Puller ($ 26.00) AUTOMOTIVE CTA2002 1 63601 Compresssion Tester ($ 12.00) AUTOMOTIVE CTA2002 1 63601 Compresssion Tester ($ 12.00) AUTOMOTIVE CTA2212 1 63801 Ridge Reamer ($ 50.00) AUTOMOTIVE CTA 8080 1 64201 Pulley Puller ($ 12.00) AUTOMOTIVE CTA 4036 1 65001 Coil Spring Clamp Set ($ 24.00) AUTOMOTIVE CTA4020 1 65401 Pittman Arm Puller 1 1/16" ($ 10.00) AUTOMOTIVE CTA4025 1 65401 Small Pittman Arm Puller ($ 10.00) AUTOMOTIVE CTA4010 1 65601 Tie Rod End Puller ($ 12.00) AUTOMOTIVE CTA4010 1 65601 Tie Rod End Puller ($ 12.00) AUTOMOTIVE CTA4020 1 66201 Pittman Arm Puller 1 5/16" ($ 12.00) AUTOMOTIVE CTA4020 1 66201 Pittman Arm Puller 1 5/16" ($ 12.00) AUTOMOTIVE 1 66401 Kaydee Lift Engine Hoist ($ 750.00) AUTOMOTIVE 1 66401 Kaydee Lift Engine Hoist ($ 750.00) AUTOMOTIVE CTA8090 1 69001 Slide Hammer Puller ($ 50.00) AUTOMOTIVE Century 87105 1 69101 Battery Charger ($ 59.00) AUTOMOTIVE CTA4300 1 Front Wheel Hub Puller ($ 12.00) AUTOMOTIVE Bluebird 1 Engine Stand ($ 300.00) CARPET/FLOOR Superior Tile Cutter 1 1 80201 Ceramic Tile Cutter Standard ($ 50.00) CARE CARPET/FLOOR 1 80401 Ceramic Tile Nipper ($ 10.00) CARE CARPET/FLOOR 0 80501 Hand Tile Scraper ($ 10.00) CARE CARPET/FLOOR 0 80701 Tile Scaper ($ 15.00) CARE CARPET/FLOOR Crain Cutter Model A 1 80801 Asphalt/Vinyl Tile Cutter ($ 160.00) CARE CARPET/FLOOR Crain 1 81201 Carpet Trimmer ($ 35.00) CARE CARPET/FLOOR Crain #900 1 82401 Heat Bond Iron ($ 50.00) CARE CARPET/FLOOR 1 82601 Silver Line Floor Edger ($ 1,250.00) CARE CARPET/FLOOR ESL 1 83001 17" Disc Floor Polisher ($ 700.00) CARE CARPET/FLOOR Sliverline 631A 1 83201 13" Floor Polisher ($ 500.00) CARE CARPET/FLOOR Silverline Baldor 1 83401 Silver Line Floor Sander ($ 1,200.00) CARE Quant HEADING 2 brand/model # ITEM DESCRIPTION Price ity CARPET/FLOOR Bon Tool Co 14-655 1 84201 Linoleum Tile Roller ($ 100.00) CARE CARPET/FLOOR Crain No 505 1 85001 Carpet Knee Kicker ($ 43.00) CARE CARPET/FLOOR National Carpet C6C17FC67F (black 1 86001 Floor Stripper Electric ($ 600.00) CARE model) CARPET/FLOOR Advance Matador 1 13" Floor Polisher ($ 300.00) CARE CARPET/FLOOR Warner 7079 1 Electric Floor Stripper ($ 800.00) CARE DOLLIES/MAT 1 181201 Carpeted Dolly ($ 25.00) HANDLING DOLLIES/MAT 1 181201 Carpeted Dolly ($ 25.00) HANDLING DOLLIES/MAT 1 181201 4 wheeled dolly ($ 25.00) HANDLING DOLLIES/MAT 1 181201 4 wheeled dolly ($ 25.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT 1 181401 Furniture Pad ($ 9.00) HANDLING DOLLIES/MAT Roll or Kari P68 1 181801 Piano Dolly ($ 195.00) HANDLING DOLLIES/MAT Roll or Kari P68 1 181801 Piano Dolly ($ 195.00) HANDLING DOLLIES/MAT Milwaukee Truck Co 40188 1 182602 Hand Appliance Dolly ($ 135.00) HANDLING DOLLIES/MAT Milwaukee Truck Co 40119 0 182801 Hand Truck ($ 60.00) HANDLING DRILLS DW972 1 202301 Dewalt 12" Cordless Drill ($ 24.00) DRILLS Milwaukee 1107-1 1 202601 1/2" Plumbers Drill ($ 100.00) DRILLS 1 209101 Milwaukee Drill 1610 ($ 120.00) FASTENING Makita 44934A 1 261801 Dry Wall Screw Gun ($ 67.00) EQUIPMENT FASTENING Pneumatic Stick Nailer Senco SN325 1 262001 ($ 100.00) EQUIPMENT Framing FASTENING Senco SCN40R 1 262201 Pneumatic Coil Roofing Nailer ($ 120.00) EQUIPMENT FASTENING Bostich N60FN 1 262301 Finish Nailer EQUIPMENT FASTENING Portomatic 421 1 262401 Pneumatic Floor Nailer ($ 450.00) EQUIPMENT FASTENING Porta Manual Nailer Kit 401 & Porta 1 262501 ($ 110.00) EQUIPMENT 501 FASTENING Porta Manual Nailer Kit 401 & Porta 1 262501 ($ 110.00) EQUIPMENT 501 FASTENING Acuset A150LS 1 262701 Pneumatic Stapler ($ 50.00) EQUIPMENT FASTENING Remington Power Driver Remington 480 1 263001 ($ 30.00) EQUIPMENT Manual GRINDERS Milwaukee 60605 1 301001 4" Disc Grinder ($ 54.00) Quant HEADING 2 brand/model # ITEM DESCRIPTION Price ity GUEST & BABY 1 321001 39" Rollaway Bed ($ 100.00) GUEST & BABY 1 321001 39" Rollaway Bed ($ 100.00) GUEST & BABY 1 321001 39" Rollaway Bed ($ 100.00) GUEST & BABY 1 329001 Large Folding Crib ($ 60.00) GUEST & BABY 1 329001 Large Folding Crib ($ 60.00) HAMMERS Bosch 11305 1 381001 Demolition Hammer ($ 300.00) HAMMERS BOSCH 1 382601 Paving Breaker ($ 765.00) Rotary Hammer 1-1/2" Spline HAMMERS Bosch 1123EVS 1 383201 ($ 250.00) Drive Rotary Hammer Drill bit HAMMERS Bosch HC4501 1 ($ 9.00) HC4501 Rotary Hammer Drill bit HAMMERS Bosch HC4511 1 ($ 18.00) HC4511 Rotary Hammer Drill bit HAMMERS Bosch HC4021 1 ($ 18.00) HC4021 Rotary Hammer Drill Bit HAMMERS Bosch4032 1 ($ 20.00) HC4032 Rotary Hammer Drill Bit HAMMERS Bosch 4040 1 ($ 30.00) HC4040 Rotary Hammer Drill Bit HAMMERS Bosch HC4060 1 ($ 50.00) HC4060 Rotary Hammer Drill Bit HAMMERS Bosch HC4071 1 ($ 55.00) HC4071 Rotary Hammer Drill Bit HAMMERS Bosch HC4091 1 ($ 60.00) HC4091 HAND TOOLS 1 341101 6 lb Sledgehammer ($ 15.00) HAND TOOLS 341404 10 lb Sledgehammer ($ 15.00) HEATING & Crosley 40 pt 1 422001 Dehumidifier ($ 50.00) VENTILATION HEATING & Drizair DZ60 1 Dehumidifier ($ 200.00) VENTILATION HOIST, JACK, LIFTS JET L-90 1 441401 Chain Hoist 1 Ton 10' ($ 200.00) HOIST, JACK, LIFTS JET 1 441701 Screwjack 10 Ton Capacity ($ 75.00) HOIST, JACK, LIFTS JET 1 441701 Screwjack 10 Ton Capacity ($ 75.00) HOIST, JACK, LIFTS JET 1 441701 Screwjack 10 Ton Capacity ($ 75.00) HOIST, JACK, LIFTS JET 1 441701 Screwjack 10 Ton Capacity ($ 75.00) HOIST, JACK, LIFTS JET 1 441701 Screwjack 10 Ton Capacity ($ 75.00) HOIST, JACK, LIFTS Winner E1593 1 442801 12 Ton Hand Jack ($ 65.00) HOIST, JACK, LIFTS Winner H1593 1 442801 12 Ton Hand Jack ($ 65.00) HOIST, JACK, LIFTS 1 442801 12 Ton Hand Jack ($ 65.00) HOIST, JACK, LIFTS Telpro 150 lb max 1 449001 Sheetrock Jack ($ 365.00) HOIST, JACK, LIFTS JET L-90 1 551401 Chain Hoist 1 Ton 10' ($ 200.00) HOIST, JACK, LIFTS LADDERS/SCAFFOLDI Scaffolding 3 Sections with back room 1 450001 ($ 2,000.00) NG Plates or Wheels LADDERS/SCAFFOLDI back room 1 450101 Cat Walk NG LADDERS/SCAFFOLDI back room 450601 8" Caster with Brake Set of 4 NG LADDERS/SCAFFOLDI 6" X 6" Steel Base Plate Set back room 450701 NG of 4 LADDERS/SCAFFOLDI back room 450801 Leveling Jack NG LADDERS/SCAFFOLDI 40' Extension Aluminum 480201 NG Ladder LADDERS/SCAFFOLDI 1 485100 Buddy Scaffold ($ 200.00) NG Quant HEADING 2 brand/model # ITEM DESCRIPTION Price ity LADDERS/SCAFFOLDI 1 485201 Stretch Plank ($ 100.00) NG LADDERS/SCAFFOLDI 1 485301 Ladder Jack (Pair) ($ 50.00) NG LADDERS/SCAFFOLDI 16' Fiberglass Double 1 485501 ($ 330.00) NG Stepladder LADDERS/SCAFFOLDI 14' Fiberglass Double 1 485601 ($ 285.00) NG Stepladder LADDERS/SCAFFOLDI 1 485701 12' Fiberglass Stepladder ($ 175.00) NG LADDERS/SCAFFOLDI 1 485901 10' Fiberglass Stepladder ($ 110.00) NG LADDERS/SCAFFOLDI 8' Aluminum Doulbe 1 486001 ($ 175.00) NG Stepladder LADDERS/SCAFFOLDI 24' Fiberglass Extension 1 486201 ($ 150.00) NG Ladder LADDERS/SCAFFOLDI 32' Fiberglass Extension 1 486601 ($ 200.00) NG Ladder LADDERS/SCAFFOLDI 40' Aluminum Extension 1 486701 ($ 300.00) NG Ladder LAWN & GARDEN Weedeater 530-402012 1 501601 Electric Line Trimmer/Edger ($ 15.00) LAWN & GARDEN Little Beaver 1 502601 1 Man Post Hole Digger ($ 2,500.00) LAWN & GARDEN 4", 6", 8", 10", 12" 1 503201 5 Auger Bits w/ carbide tips LAWN & GARDEN 1 503801 Mattock Pick ($ 18.00) Polyurethane Garden Sprayer LAWN & GARDEN 1 504401 3 Gallon ($ 10.00) Polyurethane Garden Sprayer LAWN & GARDEN 1 504401 ($ 10.00) 3 Gallon LAWN & GARDEN 1 504601 36" Landscape Rake ($ 30.00) LAWN & GARDEN 1 504701 24" Push Lawn Roller ($ 75.00) LAWN & GARDEN 1 504701 24" Push Lawn Roller ($ 75.00) LAWN & GARDEN spyker 1 505501 Broadcast Spreader Push ($ 150.00) Walk Behind Leaf Blower 10- LAWN & GARDEN Little Wonder 10HP 1 505801 ($ 1,400.00) HP LAWN & GARDEN Maxim 506001 5 HP Tiller ($ 300.00) LAWN & GARDEN Scotts 1 506101 Push Drop Spreader ($ 30.00) LAWN & GARDEN GT 1 506101 Push Drop Spreader ($ 30.00) LAWN & GARDEN GT 1 506101 Push Drop Spreader ($ 30.00) High Weed Self Propelled LAWN & GARDEN Bachtold 1 506201 ($ 610.00) Mower LAWN & GARDEN Bluebird 1 506301 Slit Seeder ($ 950.00) LAWN & GARDEN True Temper 1 508001 Contractors Wheelbarrow ($ 50.00) Double Edge Electric Hedge LAWN & GARDEN Black & Decker HT022 1 508201 ($ 30.00) Trimmer Lawn Comber Power Rake LAWN & GARDEN Bluebird 408 1 508701 ($ 800.00) w/bag Lawn Comber Power Rake LAWN & GARDEN Bluebird 1 509001 ($ 800.00) with Bag LAWN & GARDEN RAM R800 1 509201 Horizontal Log Splitter ($ 800.00) LAWN & GARDEN
Load more

Recommended publications
  • What Is Slide Sledge®
    Introduction To The Ultimate Tool For Impact Related jobs • What is Slide Sledge® •Applications for Slide Sledge® • Safety & Slide Sledge® Eliminate the Sledgehammer • The powerful Slide Sledge® Multi-Head Hammer™ reduces dangerous, time-consuming hammering jobs to a one tool, one person operation. • Eliminate the traditional sledgehammer and risk of glancing blows while impacting hammer unions, hammer/ strike wrench’s, and probe tubes. Safety Lock- Holds bar in place when tool is idle use Quick Change- Mechanism holds tips securely in place and allows for quick and simple tip changesquick tip change Ergonomic Handle- Provides Solid Grip Patented Impact Delivery System – Maximizes power transfer to tip D-Head- Keeps tips from rotating when being impacted Sledge Hammering with Slide Sledge® Job specific tips create constant pressure between Slide Sledge® and the intended target. Danger of glancing blows or not impacting the desired area can not be done. Accuracy and safety built in: Slide Sledge® is the most accurate manually driven impact delivery system in the world today. Reduces Downtime / Increases Productivity Eliminates need for special equipment and personnel to do maintenance and repairs in the field, not the shop. Two person jobs can now be done by one person, Faster, Safer and Easier! Application Areas Designed and tested in the field for two years Worked with field personnel and management in multiple industries – Petrochemical – Military Slide Sledge® hammers come in four sizes 9, 13, 14 and 21 pounds. – Mining The weight of the drive bar and the length of the tool determine the maximum force each tool can deliver. One of – Railroad the most important aspects of repairing equipment is to always – Maintenance Facilities use the right tool for the right job – Heavy Equipment OEM’s – Construction Slide Sledge® hammers can be used in almost – Road Crews every application a traditional sledge hammer – Others is being used.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • February 2016 Hardware Hotline Download
    Fourth Street We’re Hiring! Football Fever Visit ColeHardware.com/careers Happy Hour for current employment opportunities. Professional Thursday, February 4 Knife Sharpening 5:00 pm–8:00 pm Available at All Locations see page 2 for details see calendar on page 12 for dates and times COLE HARDWARE’s February 2016 NEWS AND VIEWS FROM AROUND THE STORES Download Our New App and Keep COLE HARDWARE Handy Wherever You Go! Download the brand- dialogue bubble, text us your new COLE HARDWARE app question, and we’ll get right to your iPhone or Android back to you! Check out the smartphone. You’ll have screenshots and see for your- quick and easy access self how simple it is. It’s free, to our hours and loca- of course, and just one more tions. But more important, small way we are working you can “Ask to fulfill our simple mission: us anything” “Our commitment to you: right from the Your satisfaction guaranteed. app. Press the Period.” 20% Off* Bag Sale! Saturday, February 20 Join us on Saturday, February 20, Amazon: Before You Click, for our 20% off storewide bag sale! This is a great time to stock Think About the Impact up on cleaning supplies and As I write this in mid-December, San Francisco is • Jobs. Amazon essentials. Don’t let those enduring Amazon’s latest experiment. There are creates less than half as New Year’s home billboards surrounding the City advertising one-hour many jobs as local improvement resolutions delivery. Gone are the many big green trucks of last businesses do.
    [Show full text]
  • Download the Safe Home Book
    Brought to you by Richard Cannyn Beryl Project Engineering Tampa, FL www.berylprojectengineering.com [email protected] (813) 616-3301 This publication is a compilation of well-researched articles especially for homeowners. They include valuable information and tips for helping keep families safe and their homes in top condition. Please enjoy it with my compliments! © 2013 International Association of Certified Home Inspectors & Master Inspector Certification Board 2 Brought to you by Beryl Project Engineering www.berylprojectengineering.com Table of Contents CHILD SAFETY 6 12 SAFETY DEVICES TO PROTECT YOUR CHILDREN 6 CRIB SAFETY 8 FURNITURE AND TV TIP-OVER HAZARDS 10 ANTI-TIP BRACKETS 11 WINDOW FALLS 13 SAFETY GLASS 13 CHILD-PROOFING WINDOWS AND STAIRS 16 GARAGE DOORS AND OPENERS 19 TRAMPOLINE SAFETY 21 TREE SWINGS 23 TREEHOUSES 26 LADDERS AND STAIRWAYS 28 LADDER SAFETY 28 ATTIC PULL-DOWN LADDERS 32 STAIRWAYS 34 DECK SAFETY 36 SWIMMING POOL SAFETY 38 HOME POOLS 38 SWIMMING POOL BARRIERS 43 POOL ALARMS 45 POOL DRAIN HAZARDS 47 POOL WATER PATHOGENS 48 SAUNAS 50 HOME SECURITY 51 BURGLAR-RESISTANT HOMES 51 BUMP KEYS 54 THE 10 BEST PLACES TO HIDE VALUABLES IN YOUR HOME 57 WINDOW BARS 60 SAFE ROOMS (PANIC ROOMS) 61 FIRE SAFETY 64 DRYER VENT SAFETY 64 PILOT LIGHTS 67 HEARTHS AND HEARTH EXTENSIONS 68 HOLIDAY SAFETY 69 FIRESTOPS 72 CLOTHES CLOSET LIGHTING 73 3 Brought to you by Beryl Project Engineering www.berylprojectengineering.com BARBEQUE SAFETY 75 KEROSENE HEATERS 76 ATTACHED GARAGE FIRE CONTAINMENT 78 NON-CONFORMING BEDROOMS
    [Show full text]
  • TWO YEARS BEFORE the MAST Richard H. Dana, Jr. INTRODUCTION in 1869, My Father, the Late Richard Henry Dana, Jr., Prepared A
    TWO YEARS BEFORE THE MAST Richard H. Dana, Jr. INTRODUCTION In 1869, my father, the late Richard Henry Dana, Jr., prepared a new edition of his “Two Years Before the Mast” with this preface: “After twenty-eight years, the copyright of this book has reverted to me. In presenting the first ‘author’s edition’ to the public, I have been encouraged to add an account of a visit to the old scenes, made twenty-four years after, together with notices of the subsequent story and fate of the vessels, and of some of the persons with whom the reader is made acquainted.” The popularity of this book has been so great and continued that it is now proposed to make an illustrated edition with new material. I have prepared a concluding chapter to continue my father’s “Twenty-four Years After.” This will give all that we have since learned of the fate of crew and vessels, and a brief account of Mr. Dana himself and his important lifework, which appears more fully in his published biography[1] and printed speeches and letters.[2] This concluding chapter will take the place of the biographic sketch prefixed to the last authorized edition. There is also added an appendix with a list of the crews of the two vessels in which Mr. Dana sailed, extracts from a log, and also plates of spars, rigging and sails, with names, to aid the reader. In the winter of 1879-80 I sailed round Cape Horn in a full-rigged ship from New York to California.
    [Show full text]
  • Download Catalog
    10/01/21 07:36:01 Winter Home Depot Auction Opens: Sat, Dec 2 12:00am PT Auction Closes: Wed, Dec 6 10:00am PT Lot Title Lot Title 3000 Husky 25-Gallon Mobile Job Box 3032 Cat 1000-Watt Power Inverter 3001 Glacier Bay Stainless Steel Water Dispenser 3033 Husky 60 - Piece Tool Set 3002 Glacier Bay Stainless Steel Water Dispenser 3034 Schlage Touchpad Keyless Entry 3003 Sawhorsss, Folding Work Stand 3035 Paslode Nail Gun 3004 Husky 37"Mobile Job Box 3036 Glacier Bay Tub and Shower Set 3005 Glacier Bay Stainless Steel Double Sink 3037 Kwikset Kevo Smart Locks 3006 Husky 4-Gallon Air Compressor 3038 Architectural Mailboxes and Aluminum Black 3007 Husky 8-Gallon Air Compressor Post 3008 Evaporative Cooler 3039 DeWalt Coil Framing Nails 3009 Husky Mobile Job Box 3040 Practic 21" Tile Cutter 3010 Magic Chef Fridge 3041 Flexio 990 Paint Sprayer 3011 DeWalt Power Washer 3042 3 Bessey Pole Clamps 3012 Magic Chef Microwave Oven 3043 B Air High Velocity Fan 3013 Husky Stainless Steel 10-Gallon Wet and Dry 3044 Echo 58v Cordless String Trimmer Vac 3045 Ridgid 12-Gallon Wet and Dry vac 3014 True Temper Wheelbarrow 3046 Estwing Sportsmans Hatchet, 2 Fiskars and 3015 Husky Toolbox and Tool Set Gerber Machetes 3016 Ring Chime Pro 3047 Husky T-handled Hex Wrench Set 3017 Husky Torque Wrench 3048 Husky Torque Wrench 3018 Ryobi 4" Hand Held Tile Saw 3049 Husky 18-piece Combination Wrench Set 3019 Porter Cable 18 GA Brad Nailer Kit 3050 2 DeWalt 140watt Power Inverters 3020 2 Socket Sets 3051 2 Sets of Husky Ratchet and Socket Sets 3021 Ryobi Drill/Driver
    [Show full text]
  • Demolition Tools Cold Chisels Bars, Punches & Nails Carpenter's
    A complete range of refurbishment tools, chisels and hammers - including the unique and revolutionary Fubar Demolition Tools 257 Cold Chisels 263 Bars, Punches & Nails 268 Carpenter’s Hammers 273 Mason’s Hammers 275 Electrician’s Hammers 277 Locksmith’s Hammers 278 Latt Hammers 280 Riveting Hammers 281 Nail-pulling Hammers 282 Club Hammers 284 Specific Hammers 287 Other Hammers 289 Mallets 293 Hatchets 294 Compocast/Hatchets 296 HOW TO THE BEST DEMOLITION CHOOSE TOOL TO SUIT YOUR NEEDS FuBars Aunique Stanley multi-purpose tool availableintwo sizes. They can tackleprying, splitting, boardbending, striking and nail pulling. TheFatMax XL FuBar shouldbecomeanessentialpart of everybuilder’s tool kit. Demolition & Ripping Bars Forgedhookand claw Wonder Bars endedbarscapableof Extremely useful prying, nail undertaking theheaviest pulling and levering tools in of demolition jobs. awiderange of sizes. DEMOLITION TOOLS FatMax® XL™ Fubar™ Utility Bar • 4-in-1 tool for prying, splitting, board bending and striking jobs • Textured grip gives excellent comfort and control • Bevelled nail slot for easy nail removal • Sharpened claw for prying/levering • Two tiered jaws ideal for grabbing standard sizes of timber and decking • Tempered striking/struck face prevents chipping • One piece forged steel bar increases durability Box Code Description Packaging quantity 1-55-099 460 mm FatMax® XL™FuBar™ Utility Bar - 2 9-55-099 460 mm FatMax® XL™FuBar™ Utility Bar - 5 FatMax® Functional Utility Bar - FUII • 4-in-1 tool for prying, splitting, board bending and
    [Show full text]
  • Guidelines for AUTOMATIC DATA PROCESSING PHYSICAL SECURITY and RISK Managervien-R
    FIPS PUB 31 FEDERAL INFORMATION PROCESSiNG STANDARDS PUBLICATION 1974 JUNE ,.,,---~--~~-. --------'-~---,~. --"-,,:;"::,-''::"--' -,., ---" , -~~~~-----"" .-~~-''_., -" --- .. ~ .\I I I I ' t 1 I" <:; ! \ I II I '0 e;1t 1\ ~J Guidelines FOR AUTOMATIC DATA PROCESSING PHYSICAL SECURITY AND RISK MANAGErViEN-r r--~~I 1 I I I CATEGORY: ADP OPERATIONS i _:1 SUBCATEGORY: COMPUTER SECURITY I 1 ! I i '~-"-,,--., .... ~ .,~--.. _.. ,. -""---.~ ----.--_."" __ ._. __ ,,." .. __ ... ~.~_. ---~-~--.---'-~-- ------.--.. ~--..---_---.-.-.-- ,-.--,---,,-.--.... - .. ~--.-.-._."--"'-.-._.-- --" -_.-... --_. i ~ '0 ) ".' , , . , L _. __ . __. __ ._ "'__________ ....•... _ .". _, _______., ____ , ____ .. ______ ",,~ __.,, __ ,.,. ' ___,. ___.. _, __" ____ .___ ~ _______,,. _____ " ... " ___ ,,,,,.,_,,_,,.,, ___.,." ______ ,. ___ .____________ ,,.,., .• " ,~ " • 1 FOl'ewm.'d The Federal Information Processing Standards Publication Series of the National Bureau of Standards is the official pUblication relating to standards adopted and promul­ gated under the provisions of Public Law 89-306 (Brooks Bill) and under Part 6 of Title 15, Code of Federal Regulations. These legislative and executive mandates have given the Secretary of Commerce important responsibilities for improvin'g the utilization and man­ agement of computers and automatic data processing systems in the Federal Government. To carry out the Secretary's responsibilities, the NBS, through its Institute for Computer Sciences and Technology, provides leadership, technical guidance, and coordination of government efforts in the development of guidelines and standards in these areas. The subject areas of personal privacy, data confidentiality and computer security are of the greatest national interest. The Secretary of Commerce has identified the efforts required to provide solutions to technical problems encountered in these areas as personal objectives in the Department's overall program.
    [Show full text]
  • Study Guide: Hand Tools
    STUDY GUIDE: HAND TOOLS Learning Objectives: • The features and benefits of the products you sell. • How to answer your customers’ product-related questions. • How to help your customer choose the right products. • How to increase transaction sizes by learning more about add-on sales and upselling techniques. Chapter 1: Fastening Tools Module 1: Hammers Product Knowledge: Claw Hammer • Use for general carpentry, household chores and nail pulling. • Curved claw offers leverage in removing nails. • Use only with non-hardened, common or finishing nails. • You can choose 16 or 20 oz. weights for general carpentry. For fine cabinetry or light- duty driving, choose 7, 10 and 13 oz. nail weights. • Available with a smooth face for finishing jobs, or a waffled face for more control when hammering large nails into lumber. Framing (Rip) Hammer • Use for ripping apart wooden components and demolition work. • Use only with non-hardened, common or finishing nails. • Choose weights from 20 to 32 oz. for framing and ripping. • Available with milled or waffled faces to grip the nail head and reduce the effect of glancing blows and flying nails. Ball Peen (Ball Pein) Hammer • Use with cold chisels for riveting, center punching and forming unhardened metal work. • Striking face diameter should be about 3/8” larger than the diameter of the head of the object being struck. • Popular sizes are 12 and 16 oz. • Variations include a cross-peen hammer (with a horizontal wedge-shaped face) and a straight-peen hammer (with a vertical wedge-shaped face). Sledgehammer • Use for jobs that require great force, such as breaking up concrete or driving heavy spikes.
    [Show full text]
  • E Werkzeuge-Layout 1
    Tools and Stone cutting Version 19.09.2004 Daniel Mettler Laubeggstrasse 6 3013 Bern Switzerland +41(0)31 332 27 74 +41(0)79 565 68 08 [email protected] Urs Lippert Mettenbach 4934 Madiswil Switzerland +41(0)62 965 46 26 +41(0)78 621 73 70 [email protected] © 2004 +41/55/246'34'55 Gerhard Stoll +41/78/761'38'18 Trockenmaurer / Dipl. Arch. ETH/SIA [email protected] Hüeblistrasse 28 www.stonewalls.ch 8636 Wald / Switzerland www.trockensteinmaurer-verband.ch 1. How the type of rock influ- Working stone we differentiate bedded rock and amorphous rock. The ease of working ences stone cutting and the splitting characteristics differ greatly between bedded and amorphous rock. The grade of bedding determins the tools to use and the technique to adopt. (cf. fig. 1). A good bedding is caused mostly trough binder/ bondstone a planar inner structure of the rock. Planar textures can originate from diffe- rent geologic prcoesses, however mostly strecher flat and thin stone bed-like jointing, foliated structure or chasms are responsible for it. Important for the working and splitting of stone is that the planar textures are the weak figure 1: spots of the rock. Hence when we have bedded and cyclopic to work stones we should always try to irregular stone cyclopical stone stone forms make use of these defects. We can de- tect this planar texture by noticing diffe- rences in grain size of the mineral constituents, troough a distinct bedded structure or noticable fine joints which point to chasms. Mineral veins are always a certain indication of chasms.
    [Show full text]
  • Berntsen International, Inc. Marking the Boundaries of the Nations Since 1972
    Berntsen International, Inc. Marking the Boundaries of the Nations since 1972 MONUMENT INSTALLATION INSTRUCTIONS PERMAMARK SURVEY CAPS FOR REBAR Models PERM3000, PERM4000, PERM5000, PERM6000 MATERIALS REQUIRED FOR SETTING MONUMENT: 1. Sledgehammer (recommended: Urethane-faced deadblow sledgehammer) 2. Steel stamp set 3. Survey Cap 4. Rebar 5. Work gloves and proper eye protection and clothing INSTALLATION 1. Locate and clear point at which monument is to be set. 2. Place a "scratch" mark about 1 1/2 inches (38 mm) from the end of the rebar with your pencil, pen marker, knife, etc. This mark will be your guide to assure the cap is tightly and completely seated on the rebar. 3. Drive rebar to desired depth. 4. To restrict any "sinking" of the rebar into the ground in "soft" soil (as the survey cap is driven on) clamp a pipe wrench or vice grip style locking pliers to the rebar at ground level. The handle of the wrench (or pliers) will act as a "brake" to prevent the rebar from sinking into the ground. Using a urethane-faced or rubber hammer, tap the survey cap on the rebar until the bottom of the plastic insulator has met the "scratch" mark on the rebar. When properly installed, a tremendous force must be used to remove the cap from the rebar. NO ADDITIONAL BONDING OR CRIMPING IS NECESSARY. NOTE: If the rebar you are using seems to be mushrooming excessively during driving, you may wish to make or purchase a rebar driver. Be sure to use properly hardened tools and discard any chipped or mushroomed tool.
    [Show full text]
  • Tool Operating Manual
    Tool Operating Manual The Slide Sledge™ Multi-Head™ tool and all of the associated operating equipment has been engineered, designed and manufactured to fully comply with all applicable parts of Title 29 U.S.C. "The OSHA Standards and Regulations", including all ammendments, updates and interpretations in effect on May 2, 2005 Slide Sledge 6111 Miller Creek Road Missoula, MT 59803 866-862-5208 www.slidesledge.com © 2017, Slide Sledge, LLC • 6111 Miller Creek Road • Missoula, Montana 59803 [email protected] Customer Service: 866-862-2508 • Customer Service Fax: 406-777-3938 www.slidesledge.com SS14107 Printed in USA 1. Introduction 2. Safety Information Thank you for your purchase! The Slide Sledge™ Multi-Head™ hammer will allow you to • Do not operate or perform maintenance or repair to any equipment until you have read and complete heavy equipment repairs safer, faster and easier. The Slide Sledge™ Heavy understand the original equipment manufacturers’ service manuals. Equipment™ hammer delivers a smooth, targeted blow, significantly reducing effort and risks • Always follow original equipment manufacturers’ recommended service procedures for associated with the conventional sledgehammer-tool combination. securing and preparing equipment prior to removing any parts. Removing any parts prior to Please read and understand this manual thoroughly before using your tool. In addition, do not securing equipment may result in injury and/or damage to the equipment. operate or perform maintenance or repair of any equipment until you have read and • Before removing any equipment parts or components, follow original equipment understand the original equipment manufacturers’ service manuals. manufacturers’ procedures on securing, draining, and storing fluid, electrical or hydraulic lines.
    [Show full text]