DOCSLIB.ORG

Price and Availability Subject to Change Without Prior Notice Rental Junction Revised November 30, 2020 Page 1 of 7

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Price and Availability Subject to Change Without Prior Notice Rental Junction Revised November 30, 2020 Page 1 of 7 Price and availability subject to change without prior notice Rental Junction Revised November 30, 2020 Page 1 of 7 Monday – Friday: 7:30am – 5:00pm Saturday: 7:30am – 4:00pm www.OgdenSupply.com Residential & Commercial ● Contractor Tools ● Small Loaders/Back Hoe ● Mulch ● Decorative Stone ● Masonry Supply ● Concrete Delivery ● Top Soil ● Propane DELIVERY AND PICKUP AVAILABLE CALL FOR PRICES & GOOD ADVICE Revised 2/1/19 AUTOMOTIVE TOOLS ½ Day Full Day Engine Hoist (2 Ton) 30.00 35.00 Floor Jack 25.00 30.00 Battery Charger 15.00 20.00 Auto Stand (5 Ton 5.00 10.00 Engine Stand 15.00 25.00 CLEANING & WASHING ½ Day Full Day Pressure Washer 3000 psi 50.00 65.00 Pressure Washer 4000 psi 60.00 75.00 Power Washer Extension 25.00 35.00 CONCRETE & MASONRY ½ Day Full Day Floor Grinder 80.00 100.00 Bull Float 15.00 18.00 Concrete Trowel 36” 50.00 60.00 Extra Blades 8.00 Concrete Vibrator 25.00 35.00 Concrete Mixer, Electric 30.00 40.00 Concrete Mixer, Gas 65.00 75.00 Mortar Mixer, Gas 65.00 75.00 Rebar Cutter 20.00 25.00 Brick Cutter 35.00 40.00 Trowel 2.00 Groover 2.00 Edger 2.00 Flat Slicker 2.00 Sled Runner 2.00 Painting Trowels 2.00 Mag Float 2.00 Masonry Hand Tools 2.50 Brick Trowel 2.00 Pool Trowel 4.00 12” Aluminum Concrete Chute 14.00 18.00 Mag Concrete Screeds 12 ft. 25.00 Mag Concrete Screeds 20 ft. 35.00 Concrete Finishing Brushes 4.00 Hawks 2.00 Mortar Hoes 2.00 Brick Hammers 2.00 Stone Mason Hammer 2.00 Levels 4 ft 3.00 Shovels 3.00 Rakes 3.00 Laser Level 25.00 35.00 Brick Splitter 25.00 30.00 Rebar Cutter 20.00 25.00 12 ft. Concrete Screed 15.00 20.00 20 ft. Concrete Screed 20.00 25.00 Concrete Shute 30.00 35.00 Job Light 25.00 35.00 CONTRACTOR’S TOOLS ½ Day Full Day Air Compressor, Jackhammer, Air Hoses, Chisels 95.00 120.00 Jackhammer Only 35.00 45.00 100 cfm Diesel or Gas Compressor 75.00 95.00 Electric Jackhammer 60.00 75.00 Electric Air Compressor 35.00 45.00 Tamper, Asphalt 55.00 65.00 Metabo Chipping Gun & Roto Hammer 40.00 50.00 Small Roto Hammer & Drill 35.00 45.00 Extra for Bits DIGGING & TRENCHING ½ Day Full Day Case Skidster Loader Plus Delivery 175.00 220.00 Forks Attachment 35.00 Teeth 25.00 Ditch Trencher & Trailer 125.00 200.00 FASTENING TOOLS ½ Day Full Day Finishing Nailer (Air) 35.00 40.00 Framing Gun (Air) 35.00 40.00 Flooring Nailer 35.00 40.00 Flooring Stapler (Air) 45.00 55.00 Roofing Nailer 40.00 45.00 Floor Staple (Air) 3/8”, ½” 40.00 45.00 FLOOR & CARPET CARE ½ Day Full Day 13” Floor Polisher 40.00 50.00 17” Floor Polisher 40.00 50.00 Carpet Cutter 5.00 8.00 Carpet Kicker 10.00 13.00 Carpet Iron 15.00 18.00 Carpet Dryer 25.00 35.00 Floor Sander Drum 40.00 50.00 Floor Sander Orbital 40.00 50.00 Floor Edger 18.00 22.00 Floor Roller 75 lbs. & 100 lbs. 12.00 15.00 Vacuum, Wet/Dry 16 gal 20.00 25.00 Floor Tile Stripper Electric 50.00 60.00 Floor Staple Electric Gun 25.00 35.00 Carpet Cleaner 35.00 40.00 Step Attachment 10.00 15.00 Carpet Stretcher 35.00 45.00 Floor Polisher / Stripper 30.00 40.00 GENERATORS & WORK LIGHT ½ Day Full Day 3600 watt 55.00 65.00 3500 watt 55.00 65.00 5000 watt 65.00 75.00 500 watt Work Light 15.00 25.00 Safety Barricades 5.00 7.00 JACK & LIFT ½ Day Full Day Drywall Jack 35.00 45.00 Bottle Jack 20 ton 8.00 10.00 – 12 ton LAWN & GARDEN ½ Day Full Day Pruning Saw 12.00 15.00 Hedge Trimmer (Electric) 19.00 24.00 Grass Seed Spreader 8.00 10.00 Hand Post Hole Digger 8.00 10.00 Lawn Roller 250 lbs. 11.00 15.00 Wheel Barrow 10.00 15.00 Dirt Tamper Hand 10.00 12.00 Seeder 65.00 75.00 Thatcher 45.00 55.00 Large Aerator 75.00 85.00 Aerator 65.00 75.00 Leaf Blower (Hand Held) 20.00 25.00 Leaf Blower 8 hp 45.00 55.00 Lawn Blower Back Pack 35.00 45.00 Lawn Mower 30.00 40.00 Big Chipper Shredder 125.00 150.00 Lawn Edger 27.00 35.00 Log Splitter 75.00 85.00 Flower Bed Edge 55.00 75.00 Roto Tiller Rear 55.00 65.00 Roto Tiller Front 55.00 65.00 Weed Whacker Gas 30.00 35.00 Auger (11 HP) 75.00 100.00 Auger (Towable) 75.00 100.00 Sod Cutter 58.00 75.00 MISCELLANEOUS ½ Day Full Day Extension Cord 50’ 5.00 7.00 Saw Horses (pair) 5.00 9.00 Sledgehammer 10 lbs 5.00 8.00 Belt Sander 3”x21” 15.00 20.00 Drill ½ Electric 10.00 14.00 Drywall Sander 35.00 40.00 Drywall Screw Gun 12.00 16.00 Floor Jack 20 Ton 12 Ton 10.00 15.00 Pedestal Fan 15.00 25.00 Drywall Dolly 15.00 22.00 Hand Truck 12.00 18.00 Heat Gun 10.00 15.00 Wallpaper Steamer 20.00 27.00 Roofing Torch 15.00 20.00 Professional Worklight 15.00 25.00 Siding Break 10’6” 65.00 75.00 Kerosene Heater 35.00 40.00 PARTY & BANQUET Full Day Table 8’ Round 8.00 ea. Chair, Folding 2.00 ea. Table 8’ Rectangular 7.00 ea. Chair, Folding, Padded 2.50 ea. Canopy Tent 10’x10’ 65.00 PLUMBING TOOLS ½ Day Full Day Snake 100 ft 5/8” Cable 50.00 60.00 Snake 100 ft ½” Cable 40.00 50.00 Basin Chain Wrench Cutter 15.00 20.00 Drill Snake ¼” x 25’ 20.00 30.00 Hand Snake 15.00 20.00 Toilet Snake 15.00 20.00 PUMPS ½ Day Full Day 2” Trash Pump Gas 42.00 50.00 Floor Pump Electric 1 ¼” 30.00 35.00 Floor Pump Electric 3/4” 20.00 25.00 Electric Pump 2” 40.00 50.00 Pump for Water Beds 20.00 25.00 SAWS & CUTTING TOOLS ½ Day Full Day Bolt Cutter 10.00 15.00 Rebar Cutter 25.00 35.00 Miter Saw Electric 35.00 45.00 Tile Saw 12” Wet 45.00 55.00 Tile Saw 14” Wet 65.00 75.00 Tile Cutter Manual 18.00 20.00 Masonry Saw 12” Electric 40.00 50.00 Masonry Saw 12” Gas 40.00 50.00 Masonry Saw 14” Gas 40.00 50.00 Concrete Floor Saw 70.00 85.00 Sawzall/Reciprocating Saw 20.00 25.00 Circular Saw 7 ¼” 20.00 25.00 Router 20.00 25.00 Band Saw Hand Held 30.00 35.00 Jig Saw 20.00 25.00 Rental Terms Drivers License & Major Credit Card Required Only renter of record is authorized to operate rented equipment. Equipment to be operated by renter at designated location only. Otherwise additional rent will be charged. Rental Period All rental items minimum ½ day up to 4 hours. One day: 4 - 8 Hours Saturday Special 4pm Saturday to 8am Monday at the 1 day rate Weekdays From 5pm to 8am following day at the ½ day rate Cleaning Policy Item must be returned cleaned and in same working condition as rented. Cleaning Charge/Damage Charge Minimum $15.00 or billed at our discretion. Any damage to equipment will be billed to the customer. Equipment Problems Customer is responsible to call Rental Junction immediately for any mechanical or rental equipment problems. Fuel Charge Renter will be charged for fuel usage. Prices and Availability Subject to Change Without Notice.
Load more

Recommended publications
  • What Is Slide Sledge®
    Introduction To The Ultimate Tool For Impact Related jobs • What is Slide Sledge® •Applications for Slide Sledge® • Safety & Slide Sledge® Eliminate the Sledgehammer • The powerful Slide Sledge® Multi-Head Hammer™ reduces dangerous, time-consuming hammering jobs to a one tool, one person operation. • Eliminate the traditional sledgehammer and risk of glancing blows while impacting hammer unions, hammer/ strike wrench’s, and probe tubes. Safety Lock- Holds bar in place when tool is idle use Quick Change- Mechanism holds tips securely in place and allows for quick and simple tip changesquick tip change Ergonomic Handle- Provides Solid Grip Patented Impact Delivery System – Maximizes power transfer to tip D-Head- Keeps tips from rotating when being impacted Sledge Hammering with Slide Sledge® Job specific tips create constant pressure between Slide Sledge® and the intended target. Danger of glancing blows or not impacting the desired area can not be done. Accuracy and safety built in: Slide Sledge® is the most accurate manually driven impact delivery system in the world today. Reduces Downtime / Increases Productivity Eliminates need for special equipment and personnel to do maintenance and repairs in the field, not the shop. Two person jobs can now be done by one person, Faster, Safer and Easier! Application Areas Designed and tested in the field for two years Worked with field personnel and management in multiple industries – Petrochemical – Military Slide Sledge® hammers come in four sizes 9, 13, 14 and 21 pounds. – Mining The weight of the drive bar and the length of the tool determine the maximum force each tool can deliver. One of – Railroad the most important aspects of repairing equipment is to always – Maintenance Facilities use the right tool for the right job – Heavy Equipment OEM’s – Construction Slide Sledge® hammers can be used in almost – Road Crews every application a traditional sledge hammer – Others is being used.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • February 2016 Hardware Hotline Download
    Fourth Street We’re Hiring! Football Fever Visit ColeHardware.com/careers Happy Hour for current employment opportunities. Professional Thursday, February 4 Knife Sharpening 5:00 pm–8:00 pm Available at All Locations see page 2 for details see calendar on page 12 for dates and times COLE HARDWARE’s February 2016 NEWS AND VIEWS FROM AROUND THE STORES Download Our New App and Keep COLE HARDWARE Handy Wherever You Go! Download the brand- dialogue bubble, text us your new COLE HARDWARE app question, and we’ll get right to your iPhone or Android back to you! Check out the smartphone. You’ll have screenshots and see for your- quick and easy access self how simple it is. It’s free, to our hours and loca- of course, and just one more tions. But more important, small way we are working you can “Ask to fulfill our simple mission: us anything” “Our commitment to you: right from the Your satisfaction guaranteed. app. Press the Period.” 20% Off* Bag Sale! Saturday, February 20 Join us on Saturday, February 20, Amazon: Before You Click, for our 20% off storewide bag sale! This is a great time to stock Think About the Impact up on cleaning supplies and As I write this in mid-December, San Francisco is • Jobs. Amazon essentials. Don’t let those enduring Amazon’s latest experiment. There are creates less than half as New Year’s home billboards surrounding the City advertising one-hour many jobs as local improvement resolutions delivery. Gone are the many big green trucks of last businesses do.
    [Show full text]
  • Download the Safe Home Book
    Brought to you by Richard Cannyn Beryl Project Engineering Tampa, FL www.berylprojectengineering.com [email protected] (813) 616-3301 This publication is a compilation of well-researched articles especially for homeowners. They include valuable information and tips for helping keep families safe and their homes in top condition. Please enjoy it with my compliments! © 2013 International Association of Certified Home Inspectors & Master Inspector Certification Board 2 Brought to you by Beryl Project Engineering www.berylprojectengineering.com Table of Contents CHILD SAFETY 6 12 SAFETY DEVICES TO PROTECT YOUR CHILDREN 6 CRIB SAFETY 8 FURNITURE AND TV TIP-OVER HAZARDS 10 ANTI-TIP BRACKETS 11 WINDOW FALLS 13 SAFETY GLASS 13 CHILD-PROOFING WINDOWS AND STAIRS 16 GARAGE DOORS AND OPENERS 19 TRAMPOLINE SAFETY 21 TREE SWINGS 23 TREEHOUSES 26 LADDERS AND STAIRWAYS 28 LADDER SAFETY 28 ATTIC PULL-DOWN LADDERS 32 STAIRWAYS 34 DECK SAFETY 36 SWIMMING POOL SAFETY 38 HOME POOLS 38 SWIMMING POOL BARRIERS 43 POOL ALARMS 45 POOL DRAIN HAZARDS 47 POOL WATER PATHOGENS 48 SAUNAS 50 HOME SECURITY 51 BURGLAR-RESISTANT HOMES 51 BUMP KEYS 54 THE 10 BEST PLACES TO HIDE VALUABLES IN YOUR HOME 57 WINDOW BARS 60 SAFE ROOMS (PANIC ROOMS) 61 FIRE SAFETY 64 DRYER VENT SAFETY 64 PILOT LIGHTS 67 HEARTHS AND HEARTH EXTENSIONS 68 HOLIDAY SAFETY 69 FIRESTOPS 72 CLOTHES CLOSET LIGHTING 73 3 Brought to you by Beryl Project Engineering www.berylprojectengineering.com BARBEQUE SAFETY 75 KEROSENE HEATERS 76 ATTACHED GARAGE FIRE CONTAINMENT 78 NON-CONFORMING BEDROOMS
    [Show full text]
  • TWO YEARS BEFORE the MAST Richard H. Dana, Jr. INTRODUCTION in 1869, My Father, the Late Richard Henry Dana, Jr., Prepared A
    TWO YEARS BEFORE THE MAST Richard H. Dana, Jr. INTRODUCTION In 1869, my father, the late Richard Henry Dana, Jr., prepared a new edition of his “Two Years Before the Mast” with this preface: “After twenty-eight years, the copyright of this book has reverted to me. In presenting the first ‘author’s edition’ to the public, I have been encouraged to add an account of a visit to the old scenes, made twenty-four years after, together with notices of the subsequent story and fate of the vessels, and of some of the persons with whom the reader is made acquainted.” The popularity of this book has been so great and continued that it is now proposed to make an illustrated edition with new material. I have prepared a concluding chapter to continue my father’s “Twenty-four Years After.” This will give all that we have since learned of the fate of crew and vessels, and a brief account of Mr. Dana himself and his important lifework, which appears more fully in his published biography[1] and printed speeches and letters.[2] This concluding chapter will take the place of the biographic sketch prefixed to the last authorized edition. There is also added an appendix with a list of the crews of the two vessels in which Mr. Dana sailed, extracts from a log, and also plates of spars, rigging and sails, with names, to aid the reader. In the winter of 1879-80 I sailed round Cape Horn in a full-rigged ship from New York to California.
    [Show full text]
  • Download Catalog
    10/01/21 07:36:01 Winter Home Depot Auction Opens: Sat, Dec 2 12:00am PT Auction Closes: Wed, Dec 6 10:00am PT Lot Title Lot Title 3000 Husky 25-Gallon Mobile Job Box 3032 Cat 1000-Watt Power Inverter 3001 Glacier Bay Stainless Steel Water Dispenser 3033 Husky 60 - Piece Tool Set 3002 Glacier Bay Stainless Steel Water Dispenser 3034 Schlage Touchpad Keyless Entry 3003 Sawhorsss, Folding Work Stand 3035 Paslode Nail Gun 3004 Husky 37"Mobile Job Box 3036 Glacier Bay Tub and Shower Set 3005 Glacier Bay Stainless Steel Double Sink 3037 Kwikset Kevo Smart Locks 3006 Husky 4-Gallon Air Compressor 3038 Architectural Mailboxes and Aluminum Black 3007 Husky 8-Gallon Air Compressor Post 3008 Evaporative Cooler 3039 DeWalt Coil Framing Nails 3009 Husky Mobile Job Box 3040 Practic 21" Tile Cutter 3010 Magic Chef Fridge 3041 Flexio 990 Paint Sprayer 3011 DeWalt Power Washer 3042 3 Bessey Pole Clamps 3012 Magic Chef Microwave Oven 3043 B Air High Velocity Fan 3013 Husky Stainless Steel 10-Gallon Wet and Dry 3044 Echo 58v Cordless String Trimmer Vac 3045 Ridgid 12-Gallon Wet and Dry vac 3014 True Temper Wheelbarrow 3046 Estwing Sportsmans Hatchet, 2 Fiskars and 3015 Husky Toolbox and Tool Set Gerber Machetes 3016 Ring Chime Pro 3047 Husky T-handled Hex Wrench Set 3017 Husky Torque Wrench 3048 Husky Torque Wrench 3018 Ryobi 4" Hand Held Tile Saw 3049 Husky 18-piece Combination Wrench Set 3019 Porter Cable 18 GA Brad Nailer Kit 3050 2 DeWalt 140watt Power Inverters 3020 2 Socket Sets 3051 2 Sets of Husky Ratchet and Socket Sets 3021 Ryobi Drill/Driver
    [Show full text]
  • Demolition Tools Cold Chisels Bars, Punches & Nails Carpenter's
    A complete range of refurbishment tools, chisels and hammers - including the unique and revolutionary Fubar Demolition Tools 257 Cold Chisels 263 Bars, Punches & Nails 268 Carpenter’s Hammers 273 Mason’s Hammers 275 Electrician’s Hammers 277 Locksmith’s Hammers 278 Latt Hammers 280 Riveting Hammers 281 Nail-pulling Hammers 282 Club Hammers 284 Specific Hammers 287 Other Hammers 289 Mallets 293 Hatchets 294 Compocast/Hatchets 296 HOW TO THE BEST DEMOLITION CHOOSE TOOL TO SUIT YOUR NEEDS FuBars Aunique Stanley multi-purpose tool availableintwo sizes. They can tackleprying, splitting, boardbending, striking and nail pulling. TheFatMax XL FuBar shouldbecomeanessentialpart of everybuilder’s tool kit. Demolition & Ripping Bars Forgedhookand claw Wonder Bars endedbarscapableof Extremely useful prying, nail undertaking theheaviest pulling and levering tools in of demolition jobs. awiderange of sizes. DEMOLITION TOOLS FatMax® XL™ Fubar™ Utility Bar • 4-in-1 tool for prying, splitting, board bending and striking jobs • Textured grip gives excellent comfort and control • Bevelled nail slot for easy nail removal • Sharpened claw for prying/levering • Two tiered jaws ideal for grabbing standard sizes of timber and decking • Tempered striking/struck face prevents chipping • One piece forged steel bar increases durability Box Code Description Packaging quantity 1-55-099 460 mm FatMax® XL™FuBar™ Utility Bar - 2 9-55-099 460 mm FatMax® XL™FuBar™ Utility Bar - 5 FatMax® Functional Utility Bar - FUII • 4-in-1 tool for prying, splitting, board bending and
    [Show full text]
  • Guidelines for AUTOMATIC DATA PROCESSING PHYSICAL SECURITY and RISK Managervien-R
    FIPS PUB 31 FEDERAL INFORMATION PROCESSiNG STANDARDS PUBLICATION 1974 JUNE ,.,,---~--~~-. --------'-~---,~. --"-,,:;"::,-''::"--' -,., ---" , -~~~~-----"" .-~~-''_., -" --- .. ~ .\I I I I ' t 1 I" <:; ! \ I II I '0 e;1t 1\ ~J Guidelines FOR AUTOMATIC DATA PROCESSING PHYSICAL SECURITY AND RISK MANAGErViEN-r r--~~I 1 I I I CATEGORY: ADP OPERATIONS i _:1 SUBCATEGORY: COMPUTER SECURITY I 1 ! I i '~-"-,,--., .... ~ .,~--.. _.. ,. -""---.~ ----.--_."" __ ._. __ ,,." .. __ ... ~.~_. ---~-~--.---'-~-- ------.--.. ~--..---_---.-.-.-- ,-.--,---,,-.--.... - .. ~--.-.-._."--"'-.-._.-- --" -_.-... --_. i ~ '0 ) ".' , , . , L _. __ . __. __ ._ "'__________ ....•... _ .". _, _______., ____ , ____ .. ______ ",,~ __.,, __ ,.,. ' ___,. ___.. _, __" ____ .___ ~ _______,,. _____ " ... " ___ ,,,,,.,_,,_,,.,, ___.,." ______ ,. ___ .____________ ,,.,., .• " ,~ " • 1 FOl'ewm.'d The Federal Information Processing Standards Publication Series of the National Bureau of Standards is the official pUblication relating to standards adopted and promul­ gated under the provisions of Public Law 89-306 (Brooks Bill) and under Part 6 of Title 15, Code of Federal Regulations. These legislative and executive mandates have given the Secretary of Commerce important responsibilities for improvin'g the utilization and man­ agement of computers and automatic data processing systems in the Federal Government. To carry out the Secretary's responsibilities, the NBS, through its Institute for Computer Sciences and Technology, provides leadership, technical guidance, and coordination of government efforts in the development of guidelines and standards in these areas. The subject areas of personal privacy, data confidentiality and computer security are of the greatest national interest. The Secretary of Commerce has identified the efforts required to provide solutions to technical problems encountered in these areas as personal objectives in the Department's overall program.
    [Show full text]
  • Study Guide: Hand Tools
    STUDY GUIDE: HAND TOOLS Learning Objectives: • The features and benefits of the products you sell. • How to answer your customers’ product-related questions. • How to help your customer choose the right products. • How to increase transaction sizes by learning more about add-on sales and upselling techniques. Chapter 1: Fastening Tools Module 1: Hammers Product Knowledge: Claw Hammer • Use for general carpentry, household chores and nail pulling. • Curved claw offers leverage in removing nails. • Use only with non-hardened, common or finishing nails. • You can choose 16 or 20 oz. weights for general carpentry. For fine cabinetry or light- duty driving, choose 7, 10 and 13 oz. nail weights. • Available with a smooth face for finishing jobs, or a waffled face for more control when hammering large nails into lumber. Framing (Rip) Hammer • Use for ripping apart wooden components and demolition work. • Use only with non-hardened, common or finishing nails. • Choose weights from 20 to 32 oz. for framing and ripping. • Available with milled or waffled faces to grip the nail head and reduce the effect of glancing blows and flying nails. Ball Peen (Ball Pein) Hammer • Use with cold chisels for riveting, center punching and forming unhardened metal work. • Striking face diameter should be about 3/8” larger than the diameter of the head of the object being struck. • Popular sizes are 12 and 16 oz. • Variations include a cross-peen hammer (with a horizontal wedge-shaped face) and a straight-peen hammer (with a vertical wedge-shaped face). Sledgehammer • Use for jobs that require great force, such as breaking up concrete or driving heavy spikes.
    [Show full text]
  • E Werkzeuge-Layout 1
    Tools and Stone cutting Version 19.09.2004 Daniel Mettler Laubeggstrasse 6 3013 Bern Switzerland +41(0)31 332 27 74 +41(0)79 565 68 08 [email protected] Urs Lippert Mettenbach 4934 Madiswil Switzerland +41(0)62 965 46 26 +41(0)78 621 73 70 [email protected] © 2004 +41/55/246'34'55 Gerhard Stoll +41/78/761'38'18 Trockenmaurer / Dipl. Arch. ETH/SIA [email protected] Hüeblistrasse 28 www.stonewalls.ch 8636 Wald / Switzerland www.trockensteinmaurer-verband.ch 1. How the type of rock influ- Working stone we differentiate bedded rock and amorphous rock. The ease of working ences stone cutting and the splitting characteristics differ greatly between bedded and amorphous rock. The grade of bedding determins the tools to use and the technique to adopt. (cf. fig. 1). A good bedding is caused mostly trough binder/ bondstone a planar inner structure of the rock. Planar textures can originate from diffe- rent geologic prcoesses, however mostly strecher flat and thin stone bed-like jointing, foliated structure or chasms are responsible for it. Important for the working and splitting of stone is that the planar textures are the weak figure 1: spots of the rock. Hence when we have bedded and cyclopic to work stones we should always try to irregular stone cyclopical stone stone forms make use of these defects. We can de- tect this planar texture by noticing diffe- rences in grain size of the mineral constituents, troough a distinct bedded structure or noticable fine joints which point to chasms. Mineral veins are always a certain indication of chasms.
    [Show full text]
  • Berntsen International, Inc. Marking the Boundaries of the Nations Since 1972
    Berntsen International, Inc. Marking the Boundaries of the Nations since 1972 MONUMENT INSTALLATION INSTRUCTIONS PERMAMARK SURVEY CAPS FOR REBAR Models PERM3000, PERM4000, PERM5000, PERM6000 MATERIALS REQUIRED FOR SETTING MONUMENT: 1. Sledgehammer (recommended: Urethane-faced deadblow sledgehammer) 2. Steel stamp set 3. Survey Cap 4. Rebar 5. Work gloves and proper eye protection and clothing INSTALLATION 1. Locate and clear point at which monument is to be set. 2. Place a "scratch" mark about 1 1/2 inches (38 mm) from the end of the rebar with your pencil, pen marker, knife, etc. This mark will be your guide to assure the cap is tightly and completely seated on the rebar. 3. Drive rebar to desired depth. 4. To restrict any "sinking" of the rebar into the ground in "soft" soil (as the survey cap is driven on) clamp a pipe wrench or vice grip style locking pliers to the rebar at ground level. The handle of the wrench (or pliers) will act as a "brake" to prevent the rebar from sinking into the ground. Using a urethane-faced or rubber hammer, tap the survey cap on the rebar until the bottom of the plastic insulator has met the "scratch" mark on the rebar. When properly installed, a tremendous force must be used to remove the cap from the rebar. NO ADDITIONAL BONDING OR CRIMPING IS NECESSARY. NOTE: If the rebar you are using seems to be mushrooming excessively during driving, you may wish to make or purchase a rebar driver. Be sure to use properly hardened tools and discard any chipped or mushroomed tool.
    [Show full text]
  • Tool Operating Manual
    Tool Operating Manual The Slide Sledge™ Multi-Head™ tool and all of the associated operating equipment has been engineered, designed and manufactured to fully comply with all applicable parts of Title 29 U.S.C. "The OSHA Standards and Regulations", including all ammendments, updates and interpretations in effect on May 2, 2005 Slide Sledge 6111 Miller Creek Road Missoula, MT 59803 866-862-5208 www.slidesledge.com © 2017, Slide Sledge, LLC • 6111 Miller Creek Road • Missoula, Montana 59803 [email protected] Customer Service: 866-862-2508 • Customer Service Fax: 406-777-3938 www.slidesledge.com SS14107 Printed in USA 1. Introduction 2. Safety Information Thank you for your purchase! The Slide Sledge™ Multi-Head™ hammer will allow you to • Do not operate or perform maintenance or repair to any equipment until you have read and complete heavy equipment repairs safer, faster and easier. The Slide Sledge™ Heavy understand the original equipment manufacturers’ service manuals. Equipment™ hammer delivers a smooth, targeted blow, significantly reducing effort and risks • Always follow original equipment manufacturers’ recommended service procedures for associated with the conventional sledgehammer-tool combination. securing and preparing equipment prior to removing any parts. Removing any parts prior to Please read and understand this manual thoroughly before using your tool. In addition, do not securing equipment may result in injury and/or damage to the equipment. operate or perform maintenance or repair of any equipment until you have read and • Before removing any equipment parts or components, follow original equipment understand the original equipment manufacturers’ service manuals. manufacturers’ procedures on securing, draining, and storing fluid, electrical or hydraulic lines.
    [Show full text]