THOR ZONE BOOSTER CELL

USER MANUAL (ENG) WHAT’S IN THE BOX?

BOOSTER CELL

SCREWS

4X M3x18 8X M3x4

BC LINK

THOR ZONE S:t Persgatan 23, 602 33 Norrköping [email protected] thor-zone.com BOOSTER CELL 1 INSTALL BOOSTER CELL — SHELL (1/2)

TOOLS SCREWS

• Hex key (size: H2.0)

INSTRUCTIONS 1. Remove the original front cap and the grills

THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 2 INSTALL BOOSTER CELL — SHELL (2/2)

TOOLS SCREWS

• Hex key (size: H2.0)

INSTRUCTIONS 2. Align the Booster Cell to the Shell NOTE: Rotate Booster Cell by 180° if you are using flipped layout 3. Secure both of them to each other using 2x short grills

THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 3 INSTALL BOOSTER CELL — CORE

TOOLS SCREWS

• Hex key (size: H2.0) 2x M3x4

INSTRUCTIONS 1. Remove the original storage frames and screws 2. Attach the BC Link to the Core and secure it with two M3x4 screws 3. Connect the BC Link 2-pin connector (Booster Cell front button) NOTE: Configure as either a power button or reset switch 4. Connect the BC Link 4-pin connector to a fan header on your motherboard • Connect the BC Link 3-pin connector to one of the OUT-ports on your LED strips NOTE: R ONLY

PWM FAN HEADER OUT

POWER OR RESET SWITCH

THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 4 ADD 120MM FAN

TOOLS SCREWS

• Hex key (size: H2.0) 4x M3x18

INSTRUCTIONS 1. Attach a slim 120mm PWM fan to the Booster Cell and secure it using four M3x18 screws 2. Connect 4-pin PWM fan connector to the Booster Cell

THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com MJOLNIR 5