THOR ZONE BOOSTER CELL USER MANUAL (ENG) WHAT’S IN THE BOX? BOOSTER CELL SCREWS 4X M3x18 8X M3x4 BC LINK THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 1 INSTALL BOOSTER CELL — SHELL (1/2) TOOLS SCREWS • Hex key (size: H2.0) INSTRUCTIONS 1. Remove the original front cap and the grills THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 2 INSTALL BOOSTER CELL — SHELL (2/2) TOOLS SCREWS • Hex key (size: H2.0) INSTRUCTIONS 2. Align the Booster Cell to the Shell NOTE: Rotate Booster Cell by 180° if you are using flipped layout 3. Secure both of them to each other using 2x short grills THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 3 INSTALL BOOSTER CELL — CORE TOOLS SCREWS • Hex key (size: H2.0) 2x M3x4 INSTRUCTIONS 1. Remove the original storage frames and screws 2. Attach the BC Link to the Core and secure it with two M3x4 screws 3. Connect the BC Link 2-pin connector (Booster Cell front button) NOTE: Configure as either a power button or reset switch 4. Connect the BC Link 4-pin connector to a fan header on your motherboard • Connect the BC Link 3-pin connector to one of the OUT-ports on your LED strips NOTE: MJOLNIR R ONLY PWM FAN HEADER OUT POWER OR RESET SWITCH THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com BOOSTER CELL 4 ADD 120MM FAN TOOLS SCREWS • Hex key (size: H2.0) 4x M3x18 INSTRUCTIONS 1. Attach a slim 120mm PWM fan to the Booster Cell and secure it using four M3x18 screws 2. Connect 4-pin PWM fan connector to the Booster Cell THOR ZONE S:t Persgatan 23, 602 33 Norrköping Sweden [email protected] thor-zone.com MJOLNIR 5.