DOCSLIB.ORG

Spacecraft Docking Mechanism‐ a Mechanical Design at All Brief Overview”

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Spacecraft Docking Mechanism‐ a Mechanical Design at All Brief Overview” Association for Machines and Mechanisms News Bulletin Volume 7, No. 2 April 2015 Message from the Editor-in-Chief With the scorching heat stepping in after the spring season, Volume 7, No. 2,, April 2015 issue of the Bulletin of the Association of Machines and Mechanisms (AMM) is being published in this late April. Objectives and Activities Dr. R. Ranganath, the Zonal Vice President (South), has taken the main The main objective of responsibility to bring out this issue of the Bulletin. His group has AMM is to contribute to contributed an interesting article on “Spacecraft Docking Mechanism‐ A mechanical design at all Brief Overview”. This article makes a review on the state‐of‐the‐art systems levels starting from regarding interplanetary exploration for landing on Moon, Mars and the most academic research to recent step to land on a Comet. This article is sure to enthuse not only members industrial initiatives, of the Association of Machines and Mechanisms, but also other readers who take thereby enhancing the due interest in space missions and related astronomical issues. quality and reliability of indigenous machines. With The iNaCoMM‐2015 and some other events associated with the Association this in view, AMM are being organised in the coming months. Interested persons may find the organises the International briefs about these events in this issue of the Bulletin similar to previous & National Conference on issues and can decide on sending articles and/or participate in the same. Machines and Mechanisms, iNaCoMM, Dr. G. Sarvana Kumar, the Secretary of the AMM, and other office bearers of and the workshops on AMM have taken due initiative to publish this issue. The Editor‐in‐Chief Industrial Problems on gratefully acknowledges the support exteended by the office bearers and Machines and Editorial Board members. Mechanisms, IPRoMM regularly. For bringing out July 2015 issue, AMM members are requested to contribute articles, technical briefs, etc. and send samme to the editorial team. Inside This Issue Constructive suggestions, comments towards improvement of the Bulletin 1. Message from the Editor-in-Chief of the AMM are most welcome. 2. About the AMM and IFToMM 3. Contributed Article 5. Forthcoming Events 6. Advertisement Prof. Santanu Das Editor–in–Chief Contact Details Dr. G. Saravana Kumar Secretaryy, AMM Tel: (044) 2257 4736 (O) Fax: (044) 2257 4732 E‐mail: [email protected] Web Site: http://www.ammindia.org About the Association of Machines and Mechanisms (AMM) The AMM headquarter is currently located at the Department of Engineering Design, IIT Madras. A new set of office bearers have taken charge of the affairs of AMM. AMM invites both individual and corporate membership from Indian academia, research organizations and industry. Membership benefits and other information about AMM are available at www.ammindia.org. The body of Zonal Vice Presidents (ZVPs) is active over the past several years with representations from the four corners of the country. They are playing the role of nodal agencies so as to decentralise the AMM official activities and to organise workshops under the aegis of AMM to popularise the mechanism science in their respective regions. They also form the editorial team of this news bulletin. AMM invites contributory articles from its members and others working in the various fields of mechanisms science for this quarterly news bulletin. Interested people can contact the editorial team. Office Bearers of the AMM: Prof. C. Amarnath (President) Dr. G. Saravana Kumar (Secretary) Retired Professor, Department of Engineering Design, Department of Mechanical Engineering, Indian Institute of Technology, Madras, Indian Institute of Technology, Bombay, Chennai 600036, INDIA. Powai, Mumbai 400076, INDIA Phone: + 91 (44) 2257 4736 Phone: + 91 80 2368 2151 Email: [email protected] Email: [email protected] Web: http://ed.iitm.ac.in/~gsaravana Prof. Ashitava Ghosal (Vice President) Dr. Palaniappan Ramu (Treasurer) Department of Mechanical Engineering, Department of Engineering Design, Indian Institute of Science, Indian Institute of Technology, Madras, Bangalore 560 012, INDIA. Chennai 600036, INDIA. Phone: +91 80 2293 2956 Phone: + 91 (44) 2257 4738 Email: [email protected] Email: [email protected] Web: Web: http://ed.iitm.ac.in/~palramu http://www.mecheng.iisc.ernet.in/~asitava Editorial Team of the News Bulletin: Dr. Santanu Das (Editor-in-Chief, News Bulletin) Professor and Head, Department of Mechanical Engineering Kalyani Govt. Engineering College, Kalyani- 741235, INDIA Phone: +91 (33) 2582 1309 Email: [email protected] Dr. Shankar Sehgal, (Zonal Vice Dr. Ranjit Kumar Barai, (ZVP, East) President [ZVP] North) Associate Professor, Assistant Professor, Control System Laboratory, Mechanical Engineering Department, Electrical Engineering Department, Room No. 102, Block 2, U.I.E.T., Sector-25 Jadavpur University, Kolkata- 700 032, Panjab University, Chandigarh- 160 014. INDIA INDIA Phone: +91 (33) 24139270 Phone: +91 95010 24161 Email: [email protected] E-mail: [email protected] Dr. Shital S. Chiddarwar (ZVP, West) Dr. R. Ranganath, (ZVP, South) Assistant Professor, Spacecraft Mechanisms Group, Dept of Mechanical Engineering ISRO Satellite Centre, Visvesvaraya National Institute of Bangalore-560017, INDIA Technology, Nagpur, INDIA Phone: +91 (80) 25082417 Phone: +91 9561050130 Email: [email protected] Email: [email protected] Education is basic to the creation of an atmosphere in which human beings can meet one another on a plane of friendship and equality. --- Maulana Abul Kalam Azad About the International Federation for the Promotion of Mechanism and Machine Science (IFToMM) 4 Bodies of IFToMM conferences, summer schools, Design, Dynamics, and and meetings. Control (ROMANSY) General Assembly The General Assembly is the Member Organizations Mechanical Transmission supreme body of the ARMENIA AUSTRALIA Applications (MeTrApp) Federation and determines its AUSTRIA AZERBAIJAN Symposium on Robotics policy. It is composed of the BELARUS BRAZIL & Mechatronics (ISRM) Chief Delegates of IFToMM BULGARIA CANADA European Conf on Members and members of the CHINA-BEIJING Executive Council. CHINA-TAIPEI Mechanism Science CROATIA CZECH (EUCOMES) Executive Council REPUBLIC Asian Conference on The Executive Council DENMARK EGYPT MMS (ASIAN MMS) manages the affairs of the FINLAND FRANCE Summer Schools Federation between the GEORGIA GERMANY sessions of the General GREECE HUNGARY Assembly. It is elected every INDIA ISRAEL Conferences under four years, meets annually, and ITALY JAPAN IFToMM patronage is composed of the President, KAZAKHSTAN KOREA (selection) Vice- President, Secretary- LITHUANIA MACEDONIA Local conferences of the General, Treasurer, and six MEXICO ordinary members. NETHERLANDS IFToMM Members PERU POLAND Symposium on Theory Commissions and PORTUGAL ROMANIA and Practice of Robot and Committees RUSSIA SERBIA Manipulators (SYROM) Each Permanent Commission SINGAPORE SLOVAKIA IFToMM-FeIbIM Int. and Technical Committee is SLOVENIA SPAIN composed of a Chairperson, SWITZERLAND TUNISIA Symposium on Multibody appointed by the Executive TURKEY UKRAINE Systems and Council, a Secretary and UNITED KINGDOM USA Mechatronics (MUSME) members, nominated by the VIETNAM Chairperson and appointed by Joining IFToMM the Executive Council. A Welcome to Taipei, Chairperson shall not serve for Member Organizations more than two terms China-Taipei, venue of gives the following consecutively. The general the 14th IFToMM World benefits: goals for the work of the Congress, 25-30 October, international contacts for Commissions and Committees 2015, potential developments of are aimed at promoting their fields of interest by attracting www.iftomm2015.tw joint projects; researchers and practitioners, IFToMM supported reduced registration fees including young individuals, in Conferences (selection) for IFToMM order to: supported conferences; - define new directions in Int. Symposium on History of Machines and participation and research and development contribution in IFToMM within their technical areas; Mechanisms (HMM) - establish contacts between Workshop on activities and researchers and engineers; Computational publications; - initiate and develop bases and Kinematics (CK) flow of information on procedures for IFToMM activities. modern problems; Rotordynamics - promote the exchange of Conference information; CISM-IFToMM You are kindly invited - organize national and Symposium on Robot to join IFToMM and its international symposia, activities. 5 Contributed Article Spacecraft Docking Mechanism‐ A Brief Overview Anoop Kumar Srivastava1 and R Ranganath2 Spacecraft Mechanisms Group, Indian Space Research Organisation, Satellite Centre, Bangalore 1Email: [email protected], 2Email: [email protected] 1 Introduction Present day scenario in space exploration has matured much beyond the aggressive competition among select nations towards proving technical superiority of the early 60s. It now touches each and every aspect of life tending towards finding ways of survivability of humans in space. Giant steps have been taken towards interplanetary exploration from landing on Moon to landing on Mars with the most recent one being landing on a Comet. Time has come when joint collaborations in the field of space exploration is becoming a necessity for realising an alternate habitat to mankind. Extending space exploration beyond the limits of earth observation could not be done without the development of some
Load more

Recommended publications
  • 120611MS.Pdf
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -ミルスペース 120611- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - [What’s New in Virtual Library?] McGrawHill AW&ST AVIATION WEEK 1205AeroAme_Cover-ss.jpg 120528AWST_Contents.pdf, Cover.jpg 1204AeroAme_Cover-s.jpg Milbank Space Business Review SJAC 1205_Space Business Review.pdf SJAC1203_Jisedai-Uchu-Project-ni-kansuru-Chosa_Contents.pd NASA KSC SpaceportNews f, Cover.jpg 120601nasa_KSC_SpaceportNews_8pages.pdf, Cover.jpg SJAC1203_CD_Sekai-No-Uchu-Infra-Databook_Cover.jpg NASA MSFC MarshallStar CNES CnesMag 120530MarshallStar_Cover.jpg 1204cnesmag_No.53_Contents.pdf, Cover.jpg 120523MarshallStar_Cover.jpg ISAS ISAS News AIAA Aerospace America 1205ISAS_News_374_14pages.pdf, Cover.jpg 1206AeroAme_Cover-ss.jpg [What’s New in Reaｌ Library?] 重力とは何か、アインシュタインから超弦理論へ、宇宙の謎に迫る、 大栗博司 (幻冬舎新書, 12.05) 収蔵。 - - - - - - - - - - - - - - - - - - - Futron 12.06- - - - - - - - - - - - - - - - - - - - - - - - 2012 Orbital Launches by Launch Vehicle Family 2012 Orbital Commercial Launches 1 Manufacturer Market Share of Satellites Launched Through May 31, 2012 Selected Satellites with Regulatory Activity During May 2012 Satellite Location Activity NSS-7 20WL THE FCC granted SES‘s request to modify its license in terms of its access to the U.S. market within the FCC's Permitted Space Station List by relocating the C- and Ku-band operations for NSS-7 from 22 WL to 20 WL. DIRECTV 14 99WL DIRECTV applied to launch and operate a Ka-band satellite, DIRECTV 14, to be located at 99 WL. Intelsat 19 194WL The FCC granted Intelsat's request to launch and operate a C-/Ku-band satellite, Intelsat 19, to be located at 194 WL (166 EL). AMC 2 340.8WL SES applied to reassign AMC-2 from 355.02 WL (4.98 EL) to 340.8 WL (19.2 EL) where it will operate pursuant to Luxembourg ITU filings and will be flown in an inverted mode to provide Ku-band coverage in Southern Africa.
    [Show full text]
  • International Docking System Standard (IDSS) Interface Definition Document (IDD)
    IDSS IDD Revision E October 2016 International Docking System Standard (IDSS) Interface Definition Document (IDD) Revision E October 2016 IDSS IDD Revision E October 2016 This page intentionally left blank. IDSS IDD Revision E October 2016 REVISION AND HISTORY REV. DESCRIPTION PUB. DATE - Initial Release 09-21-10 A Revised, rearranged, and added text to nearly all sections of 05-13-11 document. Revised & renumbered figures. Added requirements on mechanical soft capture, soft capture sensors, HCS seals, hook stiffness, separation system, electrical bonding, environments, and materials. Added Docking Performance section, and Appendix A. B Document Hard Capture System parameter values, figure updates, 11-15-12 separation system force addition, editorial correction and updates. C Document the narrow ring Soft Capture System (SCS) geometric 11-20-13 parameters and update applicable figures. Added Appendix B on Magnetic Soft Capture. D Revision D is the first version of the document under NASA 08-04-15 configuration control and released by NASA ERU. Revision D includes the following DCNs: DCN 001 DCN 002 DCN 003 DCN 004C DCN 005 DCN 006 DCN 007 DCN 008A DCN 009B DCN 010 DCN 011 DCN 012 DCN 013 E Revision E includes the following DCNs: XX-XX-XX DCN 014 DCN 015A DCN 017 DCN 018 DCN 020 DCN 021 IDSS IDD Revision E October 2016 REVISION AND HISTORY REV. DESCRIPTION PUB. DATE DCN 022 DCN 023 DCN 024 DCN 025 DCN 027A DCN 029 DCN 032 DCN 033 DCN 037 DCN 038 DCN 039 IDSS IDD Revision E October 2016 This page intentionally left blank.
    [Show full text]
  • The International Space Station
    The International Space Station Aeronautics and Space Engineering Board April 2015 Sam Scimemi Director, International Space Station NASA Headquarters NASA’s and America’s goals onboard the Station Enable long duration human spaceflight beyond LEO Enable a commercial market in LEO Advance benefits to humanity through research Basis for international HSF exploration partnerships 2 Where we are Today In January 2014 the Administration extended the life of ISS at least to 2024 Each International Partner is working within their own policy framework to determine ISS future beyond 2020 Begun 1 year crew expedition and associated long duration human performance research Together with CASIS, NASA is expanding the commercial demand for micro-gravity research and LEO access ISS has become an important space and earth science platform expanding our knowledge of our home planet and the universe Commercial transportation development and operations for ISS is having a significant influence on the aerospace industry; considering the next commercial activity in LEO 3 3 4/ 4 4 The Future of Human Space Exploration NASA’s Building Blocks to Mars Expanding capabilities at an asteroid redirected to lunar orbit Exploring Mars and other deep U.S. companies space provide destinations affordable access to low Earth orbit Learning the fundamentals aboard the Traveling beyond low Earth International orbit with the Space Launch Space Station System rocket and Orion crew capsule Missions: 6 to 12 months Missions: 1 month up to 12 months Missions: 2 to 3 years Return:
    [Show full text]
  • ISS - Enabling Exploration Through Docking Standards
    https://ntrs.nasa.gov/search.jsp?R=20110016704 2019-11-17T11:14:50+00:00Z ISS - Enabling Exploration through Docking Standards ISSMars-DC Conference C.A. Hatfield Docking Systems Manager April 2011 International Space Station Program Standards – Enabling Exploration • Connecting spacecraft from different nations has required unique development and expensive integration and test – Apollo-Soyuz Test Project – International Space Station • Expansion of spacefaring nations (and non-governmental entities) will compound this issue in the future – Exploration cooperation could be much easier with internationally accepted interface standards • One of the key elements involved in mating dissimilar spacecraft is docking systems – Enabling dissimilar spacecraft mating for crew and cargo exchange – Enabling spacecraft assembly (e.g., APAS joining USOS and Russian Segments on ISS) Page No. 2 C.A. Hatfield ISSMars Conference April 2011 Enabling a Docking Standard • The ISS partnership has developed an International Docking System Standard (IDSS) – An expanded version is expected to be approved in the second quarter 2011 by the ISS partnership – The latest version of IDSS can be found at http://internationaldockingstandard.com/ • It is expected that several versions of IDSS compatible docking systems will eventual emerge – Both NASA and ESA are currently developing systems • NASA will install an adapter to use this standard on the U.S. segment of ISS beginning in 2015 – The two new adapters will replace existing APAS adapters used by the Space Shuttle Page No. 3 C.A. Hatfield ISSMars Conference April 2011 Docking System Early Design Progression Apollo Probe Cone Apollo Soyuz – the first androgynous system Russian Probe Cone (No scale is implied between figures) Page No.
    [Show full text]
  • Master's Thesis
    MASTER'S THESIS On-Orbit Servicing Satellite Docking Mechanism Modeling and Simulation Karim Bondoky 2015 Master of Science (120 credits) Space Engineering - Space Master Luleå University of Technology Department of Computer Science, Electrical and Space Engineering On-Orbit Servicing Satellite Docking Mechanism Modeling and Simulation by Karim Bondoky A thesis submitted in partial fulfilment for the degree of Masters of Science in Space Science and Technology Supervisors: Eng. Sebastian Schwarz Airbus Defence and Space Prof. Dr. Sergio Montenegro University of W¨urzburg Dr. Johnny Ejemalm Lule˚aUniversity of Technology October 2014 Declaration of Authorship I, Karim Bondoky, declare that this thesis titled, `On-Orbit Servicing Satellite Docking Mechanism Modeling and Simulation' and the work presented in it are my own. I confirm that: This work was done wholly while in candidature for a research degree at both Universities. Where any part of this thesis has previously been submitted for a degree or any other qualification, this has been clearly stated. Where I have consulted the published work of others, this is always clearly at- tributed. Where I have quoted from the work of others, the source is always given. With the exception of such quotations, this thesis is entirely my own work. I have acknowledged all main sources of help. Signed: Date: 15.10.2014 i Abstract Docking mechanism of two spacecraft is considered as one of the main challenging as- pects of an on-orbit servicing mission. This thesis presents the modeling, analysis and software simulation of one of the docking mechanisms called "probe and drogue". The aim of this thesis is to model the docking mechanism, simulate the docking process and use the results as a reference for the Hardware-In-the-Loop simulation (HIL) of the docking mechanism, in order to verify and validate it.
    [Show full text]
  • Gao-21-306, Nasa
    United States Government Accountability Office Report to Congressional Committees May 2021 NASA Assessments of Major Projects GAO-21-306 May 2021 NASA Assessments of Major Projects Highlights of GAO-21-306, a report to congressional committees Why GAO Did This Study What GAO Found This report provides a snapshot of how The National Aeronautics and Space Administration’s (NASA) portfolio of major well NASA is planning and executing projects in the development stage of the acquisition process continues to its major projects, which are those with experience cost increases and schedule delays. This marks the fifth year in a row costs of over $250 million. NASA plans that cumulative cost and schedule performance deteriorated (see figure). The to invest at least $69 billion in its major cumulative cost growth is currently $9.6 billion, driven by nine projects; however, projects to continue exploring Earth $7.1 billion of this cost growth stems from two projects—the James Webb Space and the solar system. Telescope and the Space Launch System. These two projects account for about Congressional conferees included a half of the cumulative schedule delays. The portfolio also continues to grow, with provision for GAO to prepare status more projects expected to reach development in the next year. reports on selected large-scale NASA programs, projects, and activities. This Cumulative Cost and Schedule Performance for NASA’s Major Projects in Development is GAO’s 13th annual assessment. This report assesses (1) the cost and schedule performance of NASA’s major projects, including the effects of COVID-19; and (2) the development and maturity of technologies and progress in achieving design stability.
    [Show full text]
  • Nasa's Commercial Crew Development
    NASA’S COMMERCIAL CREW DEVELOPMENT PROGRAM: ACCOMPLISHMENTS AND CHALLENGES HEARING BEFORE THE COMMITTEE ON SCIENCE, SPACE, AND TECHNOLOGY HOUSE OF REPRESENTATIVES ONE HUNDRED TWELFTH CONGRESS FIRST SESSION WEDNESDAY, OCTOBER 26, 2011 Serial No. 112–46 Printed for the use of the Committee on Science, Space, and Technology ( Available via the World Wide Web: http://science.house.gov U.S. GOVERNMENT PRINTING OFFICE 70–800PDF WASHINGTON : 2011 For sale by the Superintendent of Documents, U.S. Government Printing Office Internet: bookstore.gpo.gov Phone: toll free (866) 512–1800; DC area (202) 512–1800 Fax: (202) 512–2104 Mail: Stop IDCC, Washington, DC 20402–0001 COMMITTEE ON SCIENCE, SPACE, AND TECHNOLOGY HON. RALPH M. HALL, Texas, Chair F. JAMES SENSENBRENNER, JR., EDDIE BERNICE JOHNSON, Texas Wisconsin JERRY F. COSTELLO, Illinois LAMAR S. SMITH, Texas LYNN C. WOOLSEY, California DANA ROHRABACHER, California ZOE LOFGREN, California ROSCOE G. BARTLETT, Maryland BRAD MILLER, North Carolina FRANK D. LUCAS, Oklahoma DANIEL LIPINSKI, Illinois JUDY BIGGERT, Illinois GABRIELLE GIFFORDS, Arizona W. TODD AKIN, Missouri DONNA F. EDWARDS, Maryland RANDY NEUGEBAUER, Texas MARCIA L. FUDGE, Ohio MICHAEL T. MCCAUL, Texas BEN R. LUJA´ N, New Mexico PAUL C. BROUN, Georgia PAUL D. TONKO, New York SANDY ADAMS, Florida JERRY MCNERNEY, California BENJAMIN QUAYLE, Arizona JOHN P. SARBANES, Maryland CHARLES J. ‘‘CHUCK’’ FLEISCHMANN, TERRI A. SEWELL, Alabama Tennessee FREDERICA S. WILSON, Florida E. SCOTT RIGELL, Virginia HANSEN CLARKE, Michigan STEVEN M. PALAZZO, Mississippi VACANCY MO BROOKS, Alabama ANDY HARRIS, Maryland RANDY HULTGREN, Illinois CHIP CRAVAACK, Minnesota LARRY BUCSHON, Indiana DAN BENISHEK, Michigan VACANCY (II) C O N T E N T S Wednesday, October 26, 2011 Page Witness List ............................................................................................................
    [Show full text]
  • ISS Interface Mechanisms and Their Lineage
    ISS Interface Mechanisms and their Heritage The International Space Station, by nurturing technological development of a variety of pressurized and unpressurized interface mechanisms fosters “competition at the technology level”. Such redundancy and diversity allows for the development and testing of mechanisms that might be used for future exploration efforts. The International Space Station, as a test-bed for exploration, has 4 types of pressurized interfaces between elements and 6 unpressurized attachment mechanisms. Lessons learned from the design, test and operations of these mechanisms will help inform the design for a new international standard pressurized docking mechanism for the NASA Docking System. This paper will examine the attachment mechanisms on the ISS and their attributes. It will also look ahead at the new NASA docking system and trace its lineage to heritage mechanisms. ISS Interface Mechanisms and their Heritage John Cook1, Valery Aksamentov2, Thomas Hoffman3, and Wes Bruner4 The Boeing Company, 13100 Space Center Boulevard, Houston, Texas, 77059 The International Space Station, by requiring technological development of a variety of pressurized and unpressurized interface mechanisms fosters “competition at the technology level”. Such redundancy and diversity allows for the development and testing of mechanisms that might be used for future exploration efforts. The International Space Station, as a test-bed for exploration, has four types of pressurized interfaces between elements and nine unpressurized attachment mechanisms. Lessons learned from the design, test and operations of these mechanisms will aid in the design for a new International Standard pressurized docking mechanism for future NASA and commercial vehicles. This paper will examine the attachment mechanisms on the ISS and their attributes.
    [Show full text]
  • GLEX Outline
    GLEX Outline Human exploration missions beyond low earth orbit will likely require international cooperation in order to leverage limited resources. International standards can help enable cooperative missions by providing well understood, predefined interfaces allowing compatibility between unique spacecraft and systems. The International Space Station (ISS) partnership has developed a publically available International Docking System Standard (IDSS) that provides a solution to one of these key interfaces by defining a common docking interface. The docking interface provides a way for even dissimilar spacecraft to dock for exchange of crew and cargo, as well as enabling the assembly of large space systems. This paper provides an overview of the key attributes of the IDSS, an overview of the NASA Docking System (NDS), and the plans for updating the ISS with IDSS compatible interfaces. The NDS provides a state of the art, low impact docking system that will initially be made available to commercial crew and cargo providers. The ISS will be used to demonstrate the operational utility of the IDSS interface as a foundational technology for cooperative exploration. Introduction Since the beginning of human spaceflight, the need to join elements together in space has been a key capability. The need for this capability is driven largely by economics and physics – it is virtually impossible to build and launch a unitary spacecraft that can perform all expected missions on a single flight from the Earth’s surface. This capability can support a broad range of needs, such as enabling (inherently small) transportation systems to and from planetary bodies, assembling habitats in space by allowing launch of two or more modules on reasonable sized launch vehicles for space stations/ long transit habitats, and specialized spacecraft for short term missions to arrive and depart from such habitats.
    [Show full text]
  • Nasa's Management of the Gateway Program For
    NASA Office of Inspector General National Aeronautics and Space Administration Office of Audits NASA’S MANAGEMENT OF THE GATEWAY PROGRAM FOR ARTEMIS MISSIONS November 10, 2020 Report No. IG-21-004 Office of Inspector General To report, fraud, waste, abuse, or mismanagement, contact the NASA OIG Hotline at 800-424-9183 or 800-535-8134 (TDD) or visit https://oig.nasa.gov/hotline.html. You can also write to NASA Inspector General, P.O. Box 23089, L’Enfant Plaza Station, Washington, D.C. 20026. The identity of each writer and caller can be kept confidential, upon request, to the extent permitted by law. To suggest ideas or request future audits, contact the Assistant Inspector General for Audits at https://oig.nasa.gov/aboutAll.html. RESULTS IN BRIEF NASA’s Management of the Gateway Program for Artemis Missions NASA Office of Inspector General Office of Audits November 10, 2020 IG-21-004 (A-20-008-00) WHY WE PERFORMED THIS AUDIT In March 2019, the Administration directed NASA to execute a plan to land humans on the Moon’s South Pole by 2024, 4 years sooner than NASA’s intended schedule. In response, the NASA Administrator announced that the return-to-the- Moon mission would be known as Artemis and the Agency would use innovative acquisition practices to help accelerate the timetable. The Artemis program includes two exploration missions to orbit the Moon in 2021 and 2023 using the Space Launch System rocket and Orion Multi-Purpose Crew Vehicle (Orion), both of which remain under development and have yet to be flown together.
    [Show full text]
  • Eva-Exp-0031 Baseline
    EVA-EXP-0031 BASELINE National Aeronautics and EFFECTIVE DATE: 04/18/2018 Space Administration EVA OFFICE EXTRAVEHICULAR ACTIVITY (EVA) AIRLOCKS AND ALTERNATIVE INGRESS/EGRESS METHODS DOCUMENT The electronic version is the official approved document. ECCN Notice: This document does not contain export controlled technical data. Revision: Baseline Document No: EVA-EXP-0031 Release Date: 04/18/2018 Page: 2 of 143 Title: EVA Airlocks and Alternative Ingress Egress Methods Document REVISION AND HISTORY PAGE Revision Change Description Release No. No. Date EVA-EXP-0031 Baseline Baseline per CR# EVA-CR-00031 04/18/2018 Document dated 03/07/2018 submitted and approved through DAA process/DAA # TN54054 approved April 9, 2018 EVA-REF-001 DAA Pre Baseline 03/12/2015 33134 Draft EVA-RD-002 05/14/2015 SAA 12/15/2015 DRAFT The electronic version is the official approved document. ECCN Notice: This document does not contain export controlled technical data. Revision: Baseline Document No: EVA-EXP-0031 Release Date: 04/18/2018 Page: 3 of 143 Title: EVA Airlocks and Alternative Ingress Egress Methods Document Executive Summary This document captures the currently perceived vehicle and EVA trades with high level definition of the capabilities and interfaces associated with performing an Extravehicular Activity (EVA) using an exploration EVA system and ingress/egress methods during future missions. Human spaceflight missions to Cislunar space, Mars transit, the moons of Mars (Phobos and Deimos), the Lunar surface, and the surface of Mars will include both microgravity and partial-gravity EVAs, and potential vehicles with which an exploration EVA system will need to interface.
    [Show full text]
  • Annual Meeting of the Lunar Exploration Analysis Group
    Program and Abstract Volume LPI Contribution No. 1820 LUNAR AND PLANETARY IN S TIT U TE Annual Meeting of the Lunar Exploration Analysis Group October 22-24, 2014 Laurel, Maryland INSTITUTIONAL SUPPORT NASA Lunar Exploration Analysis Group The Johns Hopkins University/Applied Physics Laboratory Universities Space Research Association (USRA) Lunar and Planetary Institute National Aeronautics and Space Administration CONVENERS Samuel Lawrence Arizona State University Stephen Mackwell Lunar and Planetary Institute Clive Neal University of Notre Dame Jeffrey Plescia The Johns Hopkins University/Applied Physics Laboratory SCIENCE ORGANIZING COMMITTEE Samuel Lawrence Arizona State University Clive Neal University of Notre Dame Noah Petro NASA Goddard Space Flight Center Jeffrey Plescia The Johns Hopkins University/Applied Physics Laboratory Charles Shearer University of New Mexico Stephen Mackwell Lunar and Planetary Institute James Carpenter European Space Agency-ESTEC Jasper Halekas University of Iowa Greg Schmidt NASA Ames Research Center Lunar and Planetary Institute 3600 Bay Area Boulevard Houston TX 77058-1113 LPI Contribution No. 1820 Compiled in 20 14 by Meeting and Publication Services Lunar and Planetary Institute USRA Houston 3600 Bay Area Boulevard, Houston TX 77058-1113 This material is based upon work supported by NASA under Award No. NNX08AC28A. Any opinions, findings, and conclusions or recommendations expressed in this volume are those of the author(s) and do not necessarily reflect the views of the National Aeronautics and Space Administration. The Lunar and Planetary Institute is operated by the Universities Space Research Association under a cooperative agreement with the Science Mission Directorate of the National Aeronautics and Space Administration. Material in this volume may be copied without restraint for library, abstract service, education, or personal research purposes; however, republication of any paper or portion thereof requires the written permission of the authors as well as the appropriate acknowledgment of this publication.
    [Show full text]