Panasonic Industrial Company Components Group Line Card Catalog Summer 2008

Electrolytic Capacitors, Resistors, Film Capacitors, Inductors Ceramic Capacitors, Varistors, Switches, RF Modules, DC-DC Converters

Table of Contents

Part Number How to identify a product family Designations 4

Aluminum Electrolytic, Specialty Polymer, Electric Double Layer, Large Can Electrolytic Capacitors 6

Thick Film Chip, Low Resistance Thick ﬁ lm Chip, Ultra Low Value Chip, High Power/Wide Terminal, Thin Film Chip, Linear Thermistors, Chip Attenuators, Resistors 8 Chip Resistor Array, Chip R-Network, Chip RC-Netowrk, ESD Suppressors

Stacked Metallized, Metallized Film/Foil, Metallized Film, Film Capacitors Interference Suppressors, AC Use 10

High Frequency, General Use, High Current Inductors 12

Large Capacitance, Standard Capacitance, Low Proﬁ le, Reverse Geometery Wide Terminations, Mid-Range Voltages, High Voltage, Ceramic Capacitors 14 Microwave, Array, Interference Suppression

Surface Mount, Leaded, Low Capacitance, Ultra Low Capacitance, Varistors & Thermistors High Capacitance, 2 Array, 4 Array, 2 Varistors 2 Capacitors Per Array 16

Surface Mount, Leaded, Detector, Encoder, Faders for Audio Mixers Electromechanical 18

ISM, Bluetooth, nanoLOC, Mesh Networking, Z-Wave Wireless Modules 20

DC-DC Converters for AC Applications DC-DC Converters 22

Panasonic Components are RoHS Compliant. For more information visit: http://www.panasonic.com/industrial/components/utilities/rohsfaqs.htm

For a part number cross reference please visit our website and click on Quick Cross Reference. http://www.panasonic.com/industrial/components/

Design and specifications are subject to change without notice. Please review technical specifications before purchase. For any safety concerns regarding these products, please contact us immediately for technical consultation. Component Part Number Designations Pots. Element Cermet Trimmer Cermet Trimmer Magneto-Resistive Coils Devices Aspherical Aspherical Glass Lens SMD Choke Glass Lenses Acousto-Optic Filters Speaker Kits High-Voltage High-Voltage Cap (class 2) Ceramic Disc Coil Type EMI Coil Type Power Supplies Resistors Chip, pulse; Rotary Pots. Rotary Pots. Mode Choke Transformers: Transformers: Ceramic Filters Thick Film Chip Multilayer Varistor Current; Common Current; VIF Units Input/Output Transformers Plastic Film Cap. MLCC Resistors RF Front end RF Front System Units Graphite Sheet Metal (oxide) Film Resistors Hi Voltage Hi Voltage Capacitors Electrolytic Electrolytic Wirewound Wirewound Transformers Polymer Aluminum Capacitor Networks Switches (lead free) Aluminum SMT AL Lytic SMT AL Lytic Push & Detector Electrolytic Cap. Electrolytic Resonators Carbon Film DCDC Converter Pots. Filters Coin & Bill Layer Cap. “Gold Cap” Choke Coils Peaking Coils Line Filters Linearity Coils Chip Inductors Saw Devices RF Modulators Modules Ceramic Filters Electric Double Validating Units Validating Encoders, Rotary Bead Arrays, EMI Bead Cores; Chip Bead Cores; Chip Bead Cores, Variable InductorsVariable Inductors Variable Ceramic Disc Cap. Hi-Q MLCC Filter Speakers Choke Coils Piezoelectric Chip Resistor Micro Chip Fuse Micro Circuit Protector; Protector; Circuit Speaker Systems Networks, Resistor Array, Chip Attn, RC Array, Slide Potentiometers Rotary Pots. Encoders LC Filters, Duplexers, Push Signal Switches Slide Switches AB CDEFGHJKLM Cap. lead) lead) Slide Slide (CATV) Position Sensors Resistors Up/Down Aluminum Aluminum Electrolytic Electrolytic Electrolytic Converters Chip 3-term Caps. (radial Caps. (radial Cap., Chip RD; Potentiometers Networks: Chip Metal Film Chip Potentiometers; EL EF ET EE EV EX EZ EA ES EY EK ER EC EH EN EU EO EQ EM EW

4 Electronic Components Group ZNR Transient ZNR Transient Surge Absorbers Surge Units MLCC RF Modules Reverse Geometery Power Supply units Resistors Metal Film Power Supply Power Supplies, ALIVH, PWB, Audio ALIVH L-R Filter Resistors (Inductor) Wirewound Wirewound RF Modules Rotary Pots. Plastic Film Cap. Position Sensors, Tuners Variable Variable Ceramic Inductors Receivers Electronic Electronic Aluminum Electrolytic Electrolytic Cap. (SMT) Rotary Pots. Piezoelectric Trimmer Cap. Trimmer High Frequency Units Module Aluminum Hybrid ICs Wirewound Wirewound Resistors w/ Rotary Pots. (Radial Lead) Power Supply Panel Switches Thermal Cutoffs Electrolytic Cap. Electrolytic Resonators MLCC, ZNR, Film Capacitors, Rate Coils Systems Sensors: Aluminum Keyless Entry Touch Panels, Touch Displacement, NTC Termistors Electrolytic Cap. Electrolytic Voltage Step-Up Voltage (snap-in terminal) Rotation, Angular Encoders Switches, Potentiometers, Speakers Thermally Switching Transformers SAW Duplexers SAW Variable Inductors Variable Sensitive Resistors units Ceramic Trimmer Cap. Trimmer Remote Control Remote Control Keyboards, Keyboards, Remotes, Antenna Cap. Coils Resistors Film Fuse Fiber Optic Plastic Film Components Metal (Oxide) Power Choke Encoders, Light Touch Switches Touch Inductors, (TCO) 201-271-3173 949-462-1809 201-392-6104 201-392-6920 201-392-4864 201-392-4864 201-392-4864 Power Resistors, SAW Resistors, SAW Devices, Lenses Antenna Switches Ceramistor Light Touch Light Touch Transformers Panel Switches Thermal Cut-offs Thermal Cut-offs Plastic Film Cap. PTC Thermistors; SAW SAW Ceramic (Snap-in) Resistors Capacitor Aluminum Metal Film Electrolytic Electrolytic Resonators Resonators Capacitors Electrolytic Electrolytic 201-392-4955 NO P Q R S T U V W X Y Z Carbon Carbon Precision Precision Resistors Technical Support Technical Trimmers: Trimmers: Metal Film Chip; 6mm EL EF ET EE EV EA ES EY EK ER EC EH EN EU EQ EM EW

5 Electrolytic Capacitors

Operating (Working Voltage) Series Series Appearance Temperature Capacitance Features ECE-V__S/A (4 ~ 100 VDC) ] General purpose, 2,000 hrs at 85ºC pose -40 ~ +85ºC VS u ] General Pur EEE-_A/S 0.1 ~ 1,500 F Very compact size

EEV-HA (6.3 ~ 100 VDC) ] Long life, 1000 to 2,000 hrs. at 105ºC HA EEE-HA 0.1 ~ 1,500 uF ] Very compact size

EEV-HB (4 ~ 50 VDC) ] Long life, 2,000 hrs. at 105ºC HB EEE-HB 0.1 ~ 470 uF ] 5.8 mm height (<_ b 6) -40 ~ +105ºC (6.3 ~ 50 VDC) ] Long life, 3,000~5,000 at 105ºC HC EEE-HC 0.1 ~ 1,000 uF ] 5.8 mm height (<_ b 6) Long Life EEV-HD (10 ~ 100 VDC) ] Very long life, 5,000 hrs. at 105ºC

* HD EEE-HD 0.47 ~ 330 uF ] Industrial grade (160 ~ 450 VDC) ] High Voltage, 3,000 to 5,000 hrs. at 105ºC EB EEV-EB -25 ~ +105ºC 2.2 ~ 100 uF ] Large can, 10 ~ 18 mm (Dia.)

EEV-TG (10 ~ 100 VDC) ] High temperature, 2,000 hrs. at 125ºC TG EEE-TG 10 ~ 4,700 uF ] Low ESR at low temperature -40 ~ +125ºC EEV-TK (10 ~ 35 VDC) ] High temperature, 3,000 hrs. at 125ºC TK EEE-TK 47 ~ 470 uF ] Low ESR at low temperature

(6.3 ~ 35 VDC) ] Very Low ESR, tantalum replacement FP EEE-FP Surface Mount Type 100 ~ 1,800 uF ] High Temperature Reﬂow (260ºC) -55 ~ +105ºC ] Long life, 2,000 to 5,000 hrs. at 105ºC EEV-FK (6.3 ~ 100 VDC) FK ] Low ESR, Tantalum replacement EEE-FK 3.3 ~ 6,800 uF ] Compact & wide size range, 4 ~ 18 mm (Dia.) EEV-FC (6.3 ~ 50 VDC) ] 1,000 hrs. at 105ºC FC -40 ~ +105ºC ] Low ESR/Long Life EEE-FC 1 ~ 1,500 uF Low impedance

ECE-V__A___N ] General Purpose VS-BP -40 ~ +85ºC ] < b EEE-V__A___N (6.3 ~ 50 VDC) 5.4 mm height (_ 6) u 0.22 ~ 47 F ] Bi-Polar EEV-HP Industrial Grade HB-BP -40 ~ +105ºC EEE-HP ] 5.8 mm height

] C -40 ~ +85ºC (6.3 ~ 450 VDC) General purpose, 2000 hrs. at 85ºC

d M ECA-__M 85 (-25ºC: 160~450VDC) 0.1 ~ 22,000 uF ] Compact size

C -55 ~ +105ºC (6.3 ~ 450 VDC) ] Long life, 1,000 to 2,000 hrs. at 105ºC d NHG ECA-__HG u ] 105 (-25ºC: 160~450VDC) 0.1 ~ 22,000 F Compact size

(4 ~ 50 VDC) ] General purpose, 1,000 hrs. at 85ºC KA ECE-A__KA 0.1 ~ 470 uF ] 7 mm height

Aluminum Electrolytic -40 ~ +85ºC (4 ~ 50 VDC) ] General purpose, 1000 hrs. at 85ºC

Miniature KS ECE-A__KK/KS 0.1 ~ 330 uF ] 5 mm height General Purpose (6.3 ~ 50 VDC) ] 2,000 hrs. at 85ºC BP-SU ECE-A__N___U/X -40 ~ +85ºC 0.47 ~ 6,800 uF ] Bi-Polar general purpose Bi-Polar

-40 ~ +105ºC (10 ~ 450 VDC) ] 5,000 to 10,000 hrs. at 105ºC EB EEU-EB (-25ºC: 160~450VDC) 0.47 ~ 3,300 uF ] Very long life

(160 ~ 450 VDC) ] Very long life 8,000 to 10,000 hrs. at 105ºC

Radial Lead ED EEU-ED -25 ~ +105ºC 10 ~ 330 uF ] High Ripple Current

High Voltage (160 ~ 450 VDC) ] Very long life 8,000 to 10,000 hrs. at 105ºC EE EEU-EE -25 ~ +105ºC 10 ~ 330 uF ] High Ripple Current at high frequency

(6.3 ~ 100 VDC) ] 1,000 to 5,000 hrs. at 105ºC FC EEA/U-FC -55 ~ +105ºC 1.0 ~ 15,000 uF ] Low impedance, miniature Long Life

(6.3 ~ 50 VDC) ] Long life, 2,000 to 7,000 hrs. at 105ºC FM EEU-FM -40 ~ +105ºC 22 ~ 6,800 uF ] Low ESR, approximately half of FC Low Impedance

(10 ~ 63 VDC) ] 2,000 hrs. at 125ºC TA EEU-TA -40 ~ +125ºC 1 ~ 4,700 uF ] Automotive applications 125ºC

*NOTE: Surface Mount Type RoHS Compliant Part Number Prefix: NOTE: For higher temperature reflow, use EEE (A_) suffix: EEE (Diameter: 3~10mm) 260ºC Max. Reflow: AP & AR (4~10mm dia.) EEV (Diameter: 12.5~18mm) 245ºC Max. Reflow: AQ & AM (12.5~18mm dia.)

6 Electronic Components Group

Operating (Working Voltage) Series Part Number Appearance Temperature Capacitance Features

(2 ~ 16VDC) ] Low ESR, high ripple current CD EEF-CD 2.2 ~ 220 uF ] 1.8 mm height, ESR 18 mo maximum

(2 ~ 6.3 VDC) ] Low ESR, high ripple current CX EEF-CX 100 ~ 330 uF ] 1.9 mm height, ESR 15 mo maximum

(2 ~ 8 VDC) ] Low ESR, high ripple current UD EEF-UD -40 ~ +105ºC 68 ~ 470 uF ] 2.8 mm height, ESR 15 mo maximum

General Purpose (2 ~ 8 VDC) ] Low ESR, high ripple current UE EEF-UE 100 ~ 560 uF ] 4.2 mm height, ESR 12 mo maximum

] Lower ESR, higher ripple current (2 ~ 6.3 VDC) ] Surface Mount Polymer S EEF-S 1.8/2.0/2.8/4.2mm height, ESR 5 to 9 Low ESR Specialty Specialty 56 ~ 560 uF mo max

C ] º (2 ~ 8 VDC) High reliability H EEF-H -40 ~ +125ºC u ] 125 33 ~ 330 F Low ESR, high ripple current

] SMT Re-ﬂow solderable EN EEC-EN -10 ~ +60ºC (3.3 VDC) 0.2 F ] Coin type, low proﬁle

]

SMT SMT Re-ﬂow 260ºC max. EP EEC-EP -10 ~ +60ºC (3.3/2.6 VDC) 0.033 F ] Miniature, 3.8mm dia. x 1.5mm Height

(5.5 VDC) 0.022 ~ SD EEC-S0HD ] General purpose, 1,000 hrs. @ 70ºC 0.33 F SG EEC-S5R5 ] uA range IC memory back-up -25 ~ +70ºC (5.5 VDC) 0.47 ~ 1.5 F (5.5 VDC) ] 1,000 hrs. @ 70ºC SE EEC-SE0H 0.022 ~ 0.22 F ] Lead taping for auto insertion

(5.5 VDC) 0.1 ~ 1.5 F EEC-F5R5U -25 ~ +70ºC ] 1,000 hrs. @ 70ºC, general purpose NF (5.5 VDC) 0.033 ~ EEC-F5R5H -25 ~ +85ºC ] 1,000 hrs. @ 85ºC, high reliability F 1.0 F

]

Electric 2,000 hrs. @ 85ºC, general purpose EEC-RG (3.6 VDC) 1.0 F RG -25 ~ +85ºC ] High Reliability EEC-RF (3.6~5.5 VDC) 0.68 F RF ] Backup for mA-A range Radial Lead Double Layer -25 ~ +70ºC (2.3 VDC) 1 ~ 50 F ] Large capacitance HW EEC-HW0D -25 ~ +60ºC (2.1 VDC) 70 F ] Backup for mA - A range

] Large Capacitance HZ EEC-HZ0D -25 ~ +60ºC (2.5 VDC) 3.3~10 F ] Lower ESR than HW

ECO-S__P ] General purpose -40~ +85ºC (16 ~ 500 VDC) TS-UP ECE-C__P ] 2,000 ~ 3,000 hrs. @ 85ºC (-25ºC: 350~500VDC) 33 ~ 68,000 uF ECE-3__P ] 20 mm low proﬁle available

-40 ~ +85ºC (160 ~ 450 VDC) ] General purpose, 85ºC 2000 hrs. TS-UQ EET-UQ (-25ºC: 350~450VDC) 82 ~ 100,000 uF ] 30% smaller than TS-UP

ECO-S__A -40 ~ +105ºC (10 ~ 450 VDC) ] 2,000 ~ 3,000 hrs. @ 105ºC TS-HA ECE-C__A (-25ºC: 385~450VDC) 33 ~ 68,000 uF ] 20 mm low proﬁle available ECE-3__A ECO-S__B -40 ~ +105ºC (160 ~ 450 VDC) ] 3,000 hrs. @ 105ºC TS-HB ECE-C__B (-25ºC: 385~450VDC) 82 ~ 2,700 uF ] 20 ~ 25% smaller than TS-HA ECE-3__B

-40 ~ +105ºC (10 ~ 450 VDC) ] 2,000 hrs. @ 105ºC TS-HC EET-HC (-25ºC: 350~450VDC) 100 ~ 100,000 uF ] 30% smaller than TS-HB

-40 ~ +105ºC (200 ~ 450 VDC) ] High ripple current capability TS-ED EET-ED (-25ºC: 400~450VDC) 56 ~ 2,200 uF ] 3,000 hrs. @ 105ºC 2 & 3 - Terminal Snap-In 2 & 3 - Terminal

-40 ~ +105ºC (200 ~ 450 VDC) ] 3,000 hrs. @ 105ºC TS-EE EET-EE (-25ºC: 400~450VDC) 75 ~ 1,800 uF ] Very high ripple current capability

] -40 ~ +105ºC (160 ~ 450 VDC) Long life: 7,000 hrs. @ 105ºC TS-XB EET-XB u ] (-25ºC: 315~450VDC) 39 ~ 2,200 F Compact size

Large Can Aluminum Large ECE-T__P (4-Pin) -40 ~ +85ºC (16 ~ 500 VDC) ] 3,000 hrs. @ 85ºC, 4 or 5-pin T-UP ECE-P__P (5-Pin) (-25ºC: 350~500VDC) 270 ~ 270,000 uF ] Wide capacitance range

(16 ~ 450 VDC) ECE-T__A (4-Pin) -40 ~ +105ºC ] 3,000 hrs. @ 105ºC, 4 or 5-pin Snap-In T-HA 390 ~ 120,000 uF ECE-P__A (5-Pin) (-25ºC: 350~450VDC) ] Wide capacitance range 330 ~ 250,000 uF 4&5 Terminal

7 Resistors Power Resistance LxWxT Quantity Case Rating Resistance Tolerance T.C.R. Dimensions 7” Reel Appearance Series Size (W) Range (%) (ppm/dC) (mm) (pcs.) Features ERJ-XGNJ 01005 1 / 32 W 10 ~ 1 M * 5 0.40 x 0.20 x 0.13 20,000 ] Halogen Free General Purpose ERJ-1GEJ 1.0 ~ 1 M * 5 0201 1 / 20 W * 200 0.60 x 0.3 x 0.23 15,000 2512 ERJ-1GEF 10 ~ 1 M * 1 ] Small size and lightweight ERJ-2GEJ 1.0 ~ 2.2 M * 5 ] High reliability using metal glaze thick 0402 1 / 16 W 1.0 x 0.5 x 0.35 10,000 film resistive element and three layers of 2010 10 ~ 1 M * 1 * 100 ERJ-2RKF electrodes 1812 ERJ-3GEYJ 1.0 ~ 10 M * 5 * 200 0603 1 / 10 W 1.6 x 0.8 x 0.45 5,000 ] Compatible with automatic placement of ERJ-3EKF 10 ~ 1 M * 1 * 100 bulk taping and bulk case packaging 1210 ERJ-6GEYJ 1.0 ~ 10 M * 5 * 200 ] Reflow and flow solderability 0805 1 / 8 W 2.0 x 1.25 x 0.6 5,000 1206 ERJ-6ENF 10 ~ 2.2 M * 1 * 100 ] Meets ISO-9001 & QS-9000 standards ERJ-8GEYJ 1.0 ~ 10 M * 5 * 200 0805 1206 1 / 4 W 3.2 x 1.6 x 0.6 5,000 ] Low resistance tolerance: ERJ-3E; 6E; 8E; ERJ-8ENF 10 ~ 2.2 M * 1 * 100 14, 12 series: * 1% 0603 ERJ-14YJ 1.0 ~ 10 M * 5 * 200 0402 1210 1 / 4 W 3.2 x 2.5 x 0.6 5,000 ] NOTE: ERJ-14NF 10 ~ 1 M * 1 * 100 0201 Chip resistor 5% tolerance * * ERJ-12YJ 1.0 ~ 10 M 5 200 Resistance Range T.C.R. 1812 1 / 2 W 4.5 x 3.2 x 0.6 5,000 o d ERJ-12NF 10 ~ 1 M * 1 * 100 ( ) (ppm / C)

Thick Film Chip Resistors ERJ-12ZYJ 1.0 ~ 10 M * 5 * 200 <10 -100 ~ +600 2010 1 / 2 W 5.0 x 2.5 x 0.6 5,000 10 - 1 M * 200 5%, 1% ERJ-12SF 10 ~ 1 M * 1 * 100 >1M -400 ~ +150 ERJ-1TYJ 1.0 ~ 1 M * 5 * 200 2512 1 W 6.4 x 3.2 x 0.6 4,000 ERJ-1TNF 10 ~ 1 M * 1 * 100 ERJ-2BWJ 0.047 ~ 0.091 Current * 300 ERJ-2BSJ 0.10 ~ 0.20 * 5 Sensing 0402 1 /8 W 1.0 x 0.5 x 0.35 10,000 ERJ-2BQJ 0.22 ~ 1.0 * 250 ERJ-2BQF * 1 2512 ERJ-3RSJ 0.1 ~ 0.2 0.1 ~ 0.91 o * 5 * ERJ-3RQJ 0.22 ~ 0.91 300 0603 1 / 10 W 1.6 x 0.8 x 0.45 1812 ERJ-3RSF 0.1 ~ 0.2 1.0 ~ 9.1 o * 1 ERJ-3RQF 0.22 ~ 9.1 * 200 1210 ERJ-6RSJ 0.1 ~ 0.2 o * 5 0.1 ~ 0.91 ERJ-6RQJ 0.22 ~ 0.91 * 300 1206 1 / 8 W 2.0 x 1.25 x 0.6 ERJ-6RSF 0.1 ~ 0.2 1.0 ~ 9.1 o * 0805 1 * 200 ERJ-6RQF 0805 0.22 ~ 9.1 ] Small size and lightweight 0603 0.01 ~ 0.014 o * 1 ] ERJ-6BWF * 300 High reliability using metal glaze thick 0402 1/4 W 10m ~ 50m 2.0 x 1.25 x 0.65 film resistive elements and three layers 0.015 ~ 0.05 o * 5 of electrodes ERJ-6BWJ * 200 1206 1/2 W 0.01 ~ 0.1 * 1, 5 * 200 / * 150 ] Compatible with automatic placement of ERJ-8BW 5,000 bulk taping and bulk case packaging 0.1 ~ 0.2 o ERJ-8RSJ * 0.1 ~ 0.91 5 * ERJ-8RQJ 0.22 ~ 9.1 250 3.2 x 1.6 x 0.6 ] Reflow and flow solderability 1206 1 / 4 W ERJ-8RSF 0.1 ~ 0.2 1.0 ~ 9.1 o ] * 1 Meets ISO-9001 & QS-9000 standards ERJ-8RQF 0.22 ~ 9.1 * 200 ] Low resistance tolerance: ERJ-2R; 3R; 6R ERJ-14RSJ 0.1 ~ 0.2 o * * * 0.1 ~ 0.91 series ... 5%, 1% 5 * ERJ-14RQJ 0.22 ~ 0.91 200 1210 1 / 4 W 3.2 x 2.5 x 0.6 5%,1% ERJ-14RSF 0.1 ~ 0.2 1.0 ~ 9.1 o * 100 * 1 ERJ-14RQF 0.22 ~ 9.1 ERJ-12RSJ 0.1 ~ 0.2 * 5 0.1 ~ 0.91 o * 200 ERJ-12RQJ 0.22 ~ 0.91 1812 1 / 2 W 4.5 x 3.2 x 0.6 ERJ-12RSF 0.1 ~ 0.2 * 1 1.0 ~ 9.1 o 100 Low Resistance Thick Film Chip Resistors ERJ-12RQF 0.22 ~ 9.1 ERJ-1TRSJ 0.1 ~ 0.2 * 5 0.1 ~ 0.91 o * 200 ERJ-1TRQJ 0.22 ~ 0.91 2512 1 W 6.4 x 3.2 x 0.6 4,000 ERJ-1TRSF 0.1 ~ 0.2 Surface Mount Chip Resistors * 1 1.0 ~ 9.1 o * 100 ERJ-1TRQF 0.22 ~ 0.91 ERJ-L03 0603 1 / 10 W 47 ~ 100 milli. * 5 * 200 1.6 x 0.8 x 0.45 5,000 Current ] Small size and lightweight * * Sensing ERJ-L06 0805 1 / 8 W 47 ~ 100 milli. 5 100 2.0 x 1.25 x 0.6 5,000 ] High reliability using metal glaze thick (mo) ERJ-L08 1206 1/4 W 47 ~ 100 milli. * 5 * 100 3.2 x 1.6 x 0.6 5,000 film resistive elements and three layers ERJ-L14KJ * 5 of electrodes 2512(M) 1210 1/3 W 20 ~ 100 milli. 3.2 x 2.5 x 0.6 ERJ-L14KF * 1 ] * 100 5,000 Compatible with automatic placement of ERJ-L12KJ * 5 bulk taping and bulk case packaging 2512 1812 1/2 W 20 ~ 100 milli. 4.5 x 3.2 x 0.6 ERJ-L12KF * 1 ] Reflow and flow solderability ,47 milli: * 300 1812 ERJ-L1D 2010 1/2 W 40 ~ 100 milli. * 5 5.0 x 2.5 x 0.6 5,000 ] Meets ISO-9001 & QS-9000 standards <47 milli: * 100 ] 1210 ERJ-L1WKJ * 5 Low resistance values for ERJ-L14; L12; 2512 1W 40 ~ 100 milli. * 100 6.4 x 3.2 x 1.1 3,000 L1W series: 47 mo ~ 100 mo ERJ-L1WKF * 1 1 ~ 4 milli. * 5 ERJ-M1WT 1 ~ 2 mo * 500 ] Metal plate is used as resistance element 1 ~ 2 mo * 500 ERJ-M1WTF 3 ~ 4 milli. * 1 ] Reflow and flow solderability 5%, 1% 2512 1W 6.4 x 3.2 x 0.8 3,000 ERJ-M1WSJ * 5 ] ERJ-M1WT type is for heat dissipation > 5 mo: * 100 3 ~ 20 milli. *1% tolerance for 1~2 mo available upon , 5 mo: * 350 ERJ-M1WSF * 1 request Ultra Low Value Chip Resistors Ultra Low Value

ERJ-A1 2512 1.33W >100 mo, 1%: * 100 6.4 x 3.2 x .55 4,000 10m ~ 10k >100 mo, 5%: * 200 ] High solder joint reliability ERJ-B1 2010 1W* 1, * 5 <100 mo: * 350 5.0 x 2.5 x .55 5,000 ] Excellent heat dissipation 5-9 mo 1mo step Wide Term. High Power ERJ-B2 1206 1/2 W 5m ~ 1M 3.2 x 1.6 x 0.65 5,000 8 10m to 1m, E-24 Electronic Components Group Power Resistance Quantity Case Rating Resistance Tolerance T.C.R. LxWxT (mm) 7” Reel Appearance Series Size (W) Range (%) (ppm/dC) Dimensions (pcs.) Features

Ultra Precision ERA-2A 0402 1/16 W 10 ~ 100K * 0.1, 0.5 * 25 1.0 x 0.5 x 0.35 10,000 1210 ERA-3AEB 0603 1/10 W 47 ~ 330 K 1.6 x .80 x 0.45 1206 ERA-6AEB 0805 1/8 W 47 ~ 1 M 2.0 x 1.25 x .5 0805 ] Small size and lightweight * * ERA-3YEB 0603 1/10 W 100 ~ 33 K 0.1 25 1.6 x 0.8 x 0.45 ] High reliability EBA-6YEB 0805 1/8 W 100 ~ 100 K 2.0 x 1.25 x 0.5 ] Low T.C.R. and current noise ] Excellent non-linearity ERA-14EB 1210 1/4 W 100 ~ 200 K 3.2 x 2.5 x 0.6 0.1 %, 0.5 % ] Reﬂow & ﬂow solderability ERA-3AED 0603 1/10 W 47 ~ 330 K * 25 1.6 x .80 x 0.45 5,000 ] Meets ISO-9001 standards ERA-6AED 0805 1/8 W 47 ~ 1 M * 25 2.0 x 1.25 x .5 ] High operating temperature ERA-3AHD 0603 1/10 W 10 ~ 43 * 50 1.6 x .80 x 0.45 capability -55 to +155 for * 0.5 ERA-2A, ERA-3A and ERA6A ERA-6AHD 0805 1/8 W 10 ~ 43 * 50 2.0 x 1.25 x .5 types Thin Film Chip Resistors ERA-3Y_D 0603 1/10 W 10 ~ 330K * 50, * 25, * 100 1.6 x 0.8 x 0.45

ERA-6Y_D 0805 1/8 W 10 ~ 1M * 50, * 25, * 100 2.0 x 1.25 x 0.5

10 ~ 10 K * 5 1500 * 200

ERAS 0805 1 / 10 W 43 ~ 5.1 K * 5 2700 * 10% 2.0 x 1.25 x 0.5 5,000 ] Excellent linearity of tempera- 6.2 ~ 470 * 5 3900 * 10% ture coefﬁcient to resistance 10 ~ 10 K * 5 1500 * 200 value

ERAV 0603 1 / 16 W 43 ~ 3.3 K * 5 2700 * 10% 1.6 x 0.8 x 0.45 5,000 ] Good for temperature com-

Linear Linear pensation circuit in applica- * * 7.5 ~ 390 5 3900 10% tions such as VRM and/or PA Thermistors module 43 ~ 1K 2700 * 10% ERAW 0402 1 / 32 W * 5 1.0 x 0.5 x 0.35 10,000 22 ~ 390 3300 * 10%

Chip Attenuator Attenuation Attenuation Characteristic ] Space saving design 1 / 25 W Range Tolerance using unbalanced pie-type EXB-24AT 0404 Impedance 1.0 x 1.0 x 0.35 10,000 Package 1 ~ 5 dB * 0.3 dB attenuator Att. o Chip 6 ~ 10 dB * 0.5 dB 50

1 / 16 W 100K~220K 0.5 ERA-38V 0603 x 4 * 25 3.2 x 1.6 x 0.5 5,000 Convex Term Element 1K~100K 0.1, 0.25

0201 x 2 1 / 32 W 10 ~ 1 M * 5 * 200 x 0.8 x 0.6 x 0.35 EXB-14V Convex Term -6 10 /dC 0201 0201 x 4 1 / 32 W 10 ~ 1 M * 5 1.4 x 0.6 x 0.35 EXB-18V Flat Term 0402 8R 0402 x 4 1 - 10o: EXB-N8V 1 / 32 W 1 ~ 1 M * 5 * 600/-100x10-6/dC 2.0 x 1.0 x 0.45 10,000 Concave Term 4R ] High density of resistors in 0402 x 2 single array chip 2R EXB-24V 1 / 16 W 1.0 x 1.0 x 0.35 Convex Term ] Improved placement efﬁ- 0402 x 4 EXB-28V 1 / 32 W 2.0 x 1.0 x 0.35 ciency (2 to 4 times greater) Convex Term compared to ﬂat chip type 0402 x 8 resistors EXB-2HV 3.8 x 1.6 x 0.45 Convex Term 0603 x 2 10 - 1 M : EXB-34V 1 ~ 1 M * 5 * 200 1.6 x 1.6 x 0.50 Convex Term

Chip Resistor Array * 0603 x 4 1 / 16 W 1 EXB-38V upon request 10 > : 3.2 x 1.6 x 0.50 5,000 Convex Term Element -100 - + 600 Surface Mount Chip Resistors 0603 x 2 EXB-V4V 1.6 x 1.6 x 0.60 Concave Term 0603 x 4 EXB-V8V 3.2 x 1.6 x 0.60 Concave Term 0805 x 4 1 / 10 W EXB-S8V 10 ~ 1 M 5.08 x 2.2 x 0.70 2,500 Concave Term Element 1206 1 / 20 W 2512 3.2 x 1.6 x 0.55 5,000 ] 1608 1206 EXB-D10C Element High density placement for Concave Term digital signal applications: 1608 1 / 16 W 8 bussed resistors for pull EXB-E10C 47 ~ 1 M * 5 * 200 4.0 x 2.1 x 0.55 up/down circuits Concave Term Element Chip 4,000 ] Superior mountability due to 2512 1 / 16 W 6.4 x 3.1 x 0.55 unique concave terminal

R-Network EXB-A10P Concave Term Element Combination of R and C R = 1 / 32 W R = 10, 22, 47, 100, 220, 470, 1Ko 2.0 x 1.25 x 0.55 5,000 EZA-CT 0805 C = 12 V C = 10, 22 pF ] R-C ﬁlters for noise reduction R = 1 / 16 W in an 0805, 1206 & 1608 EZA-DT 1206 Combination of R and C 3.2 x 1.6 x 0.65 5,000 Chip C = 12 V package R = 22, 47, 100, 220, 470, 1Ko R = 1 / 16 W C = 22, 47 100 pF 4.0 x 2.1 x 0.65 4,000 RC-Network EZA-ST 1608 C = 25 V EZAEG3A 0603 C = 0.05 pF 1.6 x .80 x 0.5 5,000 ] Good ESD suppression EZAEG2A 0402 C = 0.10 pF 1.0 x 0.5 x 0.38 10,000 ] Good ESD withstanding ]

ESD Low capacitance

Suppressors EZAEGCA 0805 C = 0.25 pF (4 Per Pkg.) 2.6 x 1.85 x 0.5 5,000

[ EIA Standard Resistance Values E-96 Tolerance *1% | E-24 Tolerance *5%, 0.5%, 0.1%

9 Film Capacitors

Operating Dielectric Series Appearance Temperature Ratings Features Applications • Non-inductive, stacked

..... 0.0001 ~ 0.1 uF • Miniature • High density mounting SMD ECH-U(X) 10/16/50 VDC • Reflow soldering (industrial grade) • Tight C-tolerance -55 ~ +125ºC • Non-inductive, stacked • High density mounting SMD 0.047~0.22 uF • Miniature ECH-U(C) • Industrial Use 50/100 VDC • Reflow and flow solderability • Filters; oscillators • Tight C-tolerance

0.001 ~ 1.0 uF • Non-inductive, stacked -55 ~ +105ºC • High density mounting SMD ECW-U(C) 16/50/100/250 • Miniature -40 ~ +85ºC (commercial grade) Stacked VDC • Similar to polyester film cap Metallized 0.001 ~ 0.15 • Non-inductive, stacked uF • High density mounting SMD ECW-U(V16) -55 ~ +85ºC • Miniature Chip Type 250/400/600 (commercial grade) VDC • Similar to polyester film cap 0.001 ~ 0.01 • Non-inductive, stacked • Electronic exchange ECW-U(X) -55 ~ +105ºC uF 100 VDC • Reflow soldering • Ringer circuit telephone & PBX

• Non-inductive, stacked 0.1 ~ 1.0 uF -40 ~ +85ºC ECP-U(A) 16 VDC • Most miniaturized • Coupling, ﬁltering &PLL General Applications • Reﬂow soldering

Operating Dielectric Series Appearance Temperature Ratings Features Applications

• UL, CSA, SEMKO, DEMKO, 0.001 ~ 0.047 uF • Universal applications ECQ-U(Y) NEMKO, FIMKO, VDE, SEV 250 VAC • Interference suppression approved (Class Y)

• Flame retardant case 0.01 ~ 1.0 uF • Equipped with safety 250 VAC (UL, CSA) mechanism ECQ-U(G) -40 ~ +100ºC • Noise suppressor for AC line 300 VAC • UL, CSA, SEMKO, DEMKO, (IEC384-14) NEMKO, FIMKO, VDE, SEV approved (Class X1)

0.01 ~ 2.2 uF • Smaller size than ECQ-U(V) or

Metallized Polyester 250 VAC (UL, CSA) ECQ-U(G) • High performance, fuse (safety standard approval capacitors) approval (safety standard ECQ-U(L) 275 VAC • UL, CSA, BDE approved function type in AC line

Interference Suppressors Interference (IEC384-14) (Class X2)

• Flame retardant epoxy 0.5 ~ 6 uF coating ECH-A(X) -25 ~ +70ºC • Motors 180 ~ 430 VAC • Equipped with safety mechanism AC Use Polyester/ Metallized Polypropylene

10 Electronic Components Group

Operating Dielectric Series Appearance Temperature Ratings Features Applications

0.01 ~ 2.2 uF • Non-inductive • General purpose applications ECQ-V 50/63/100 VDC • Stacked Construction • Audio Stacked Metallized -40 ~ +85ºC 0.0001 ~ 0.47 uF • General purpose applications ECQ-B • Non-inductive 50/63/100 VDC • Audio 0.001 ~ 0.47 uF ECQ-M • Non-inductive • General purpose applications

Polyester 400/600 VDC

• Non-inductive 0.0001 ~ 0.47 uF • Low temperature coefﬁcient • High temperature applications ECH-S -40 ~ +125ºC 50/100 VDC • Tight C-tolerance • Oscillation & timing circuits PPS • High Temperature

• Timing circuits 0.0001 ~ 0.47 uF • Non-inductive ECQ-P(Z) • Temperature compensation 50/100 VDC • Tight C-tolerance • Audio

Metallized Film/Foil -40 ~ +85ºC • Non-inductive 0.001 ~ 0.47 uF • High frequency, high current ECQ-P(U) • Epoxy resin coating 200/400/630 VDC circuits • Low dissipation factor

Polypropylene 0.001 ~ 0.47 F • High frequency, high current ECQ-F -25 ~ +85ºC • Non-inductive 200/400/630 VDC circuits

0.47 ~ 2.2 uF • Smaller Size ECQ-E(H) -40 ~ +105ºC • Active ﬁltering circuit 450 VDC • Self healing property

0.001 ~ 10 uF • Wide capacitance range ECQ-E(F) 100 ~ 1250 VDC • Compact size • General purpose applications 0.01 ~ 0.47 uF • Wide capacitance range ECQ-E(B) -40 ~ +85ºC DC Polyester 250 V • Miniaturized

0.1 ~ 2.2 uF ECQ-E(C) • Flame retardant case • Active ﬁltering circuit 450 VDC

0.022 ~ 2.4 uF, 400 • Low Dissipation Factor ECW-F(L) -25 ~ +105ºC VDC • High Voltage 0.01 ~ 1.3 uF, 630 VDC • High frequency, high current circuits 0.022 ~ 0.47 uF ECW-F(B) • Low Dissipation Factor 250/400 VDC -25 ~ +85ºC Metallized Film 0.001 ~ 0.1 uF • High pulse circuits ECW-H(V) • Low Dissipation Factor 800 ~ 2000 VDC (TV, display, electronic balast)

0.1 ~ 6.8 uF • Miniaturized Size • High frequency, high current ECW-F(A) -40 ~ 105ºC 250 VDC • High Reliability Design circuits Polypropylene 700 VAC: -40 ~ +100ºC 0.001 ~ 0.0068 uF • Electronic ballast ECW-H(U) • Low Dissipation Factor 800 VAC: 700/800 VAC • Output capacitor -40 ~ +85ºC

11 Inductors

EIA Inductance Rated DC DC Case @ 100 MHz Q Min* Q Typical Current Resistance SRF** Series Size Nominal @ 100 MHz @ 800 MHz Max. (mA) (O) Min. (MHz) Features

ELJ-RF 0402 1.0 to 100 nH 8 21 to 14 400 to 90 0.05 to 5.5 6000 to 1200 ] Non-polarity ] Precision inductance ELJ-RE 0603 1.0 to 220 nH 4 to 12 47 to 20 500 to 70 0.05 to 7.5 6000 to 900 ] High self-resonant frequency

ELJ-PF 0402 2.2 to 10 nH 7 -- 1900 to 750 0.04 to 0.26 5300 to 3200 ] High current rating for

Laser Cut high-frequency use ELJ-PE 0603 2.2 to 22 nH 8 to 9 -- 2100 to 700 0.03 to 0.15 6000 to 1800

ELJ-QF 0402 1.0 to 39 nH 10 35 to 41 150 to 400 0.05 to 1.7 6000 to 1800 ] High Q

High Frequency ELJ-ND 0805 10 to 1,000 nH 8 to 15 -- 540 to 120 0.18 to 3.88 3300 to 80 ] Low inductance, tight tolerance ELJ-NC 1008 10 to 820 nH 10 to 15 -- 280 to 100 0.32 to 2.1 2500 to 100 ] Stable L-value over varied ambient conditions ELJ-NA 1210 0.047 to 8.20 uH 10 to 13 -- 450 to 60 0.20 to 11 680 to 38

ELJ-FC 1008 0.22 to 100 uH 15 to 25 -- 190 to 60 0.70 to 21 230 to 12

ELJ-FA 1210 0.22 to 220 uH 20 to 30 -- 360 to 45 0.29 to 21 230 to 7 ] Suitable for general use applications ELJ-SA 1210 10 to 270 uH 40 -- 18 to 5 1.80 to 14 30 to 4

General Use ELJ-FB 1812 0.22 to 1,000 uH 30 to 50 -- 700 to 40 0.30 to 53 230 to 2.1 Wire-Wound

ELJ-PC 1008 1.0 to 33 uH 8 to 20 -- 475 to 120 0.45 to 6.5 95 to 16 ] Low DC resistance and high DC current rating ELJ-PA 1210 1.0 to 330 uH 7 to 20 -- 600 to 50 0.15 to 16 150 to 3 ] Suitable for use in power lines

Surface Mount Chip Inductors Surface Mount Chip Inductors as a choke coil ELJ-PB 1812 10 to 220 uH 10 to 20 -- 360 to 90 0.65 to 9 19 to 4

High Current High Current ELJ-EA 1210 1.0 to 330 uH 7 to 20 -- 500 to 30 0.09 to 9.23 100 to 4 ] Very Low DC resistance

* Q Min. - Please check each specification. ** SRF - Self Resonant Frequency

12 Electronic Components Group

Inductance Range Chart Case Size EIA (Metric) Inductance Range (uH)

Product Type 0.001 0.01 0.1 1 10 100 1000 0402 (1005) D J ELJ-RF ZG D: 1 to 6.8nH / Z: 1 to 10nH J: 6.8 to 100nH / G: 10 to 100nH 0603 (1608) D J ELJ-RE Z G 0402 (1005) D: 1 to 3.9nH / Z: 1 to 10nH J: 3.9 to 220nH / G: 10 to 220nH ELJ-PF D/J D/J: 2.2 to 10nH 0603 (1608) Laser Cut K ELJ-PE K: 2.2 to 22nH

0402 (1005) D J ELJ-QF ZG D: 1 to 6.8nH / Z: 1 to 10nH J: 6.8 to 39nH / G: 10 to 39nH

0805 (2012) K High Frequency ELJ-ND J K: 10 to 1000nH J: 33 to 1000nH 1008 (2520) K ELJ-NC J 1210 (3225) K: 10 to 820nH J: 33 to 820nH ELJ-NA M J K J M: 0.047 to 0.22UH K: 0.22 to 1.0UH J: 1 to 8.2UH 1008 (2520) K ELJ-FC M J M: 0.22 to 0.82UH K: 0.22 to 100UH J: 1 to 100UH 1210 (3225) K ELJ-FA MJ M: 0.22 to 1.0UH K: 0.22 to 220UH J: 1 to 220UH 1210 (3225) ELJ-SA K Magnetic Shield K: 10 to 270UH 1812 (4532) K

General Purpose ELJ-FB M M J M: 0.22 to 10UH K: 1 to 1000UH J: 10 to 1000UH Wire - Wound Wire 1008 (2520) ELJ-PC M K M: 1 to 6.8UH K: 6.8 to 33UH 1210 (3225) ELJ-PA M K M: 1 to 10UH K: 10 to 330UH 1812 (4532) ELJ-PB K K: 10 to 220UH

High Current 1210 (3225) M K ELJ-EA M: 1 to 10UH K: 10 to 330UH Low DCR

Code Value Z: * 0.2 nH D: * 0.3 nH E: * 0.5 nH G: * 2 % A: * 3 % J: * 5 % K: * 10 % M: * 20 %

13 Ceramic Capacitors

Case Size Operating Temperature Capacitance Series Appearance (EIA) Voltage (VDC) Characteristics Range Features

ECJ-0 0402 6.3, 10V X5R, Y5V 1 uF to 2.2 uF ] High cap in small case sizes (2.2uF in 0402, 10uF in 0603, ECJ-1 0603 6.3, 10, 16V X5R, Y5V 1 uF to 10 uF 22 uF in 0805) ] Low ESR/ESL

Large Large ECJ-2 0805 6.3, 10, 16, 25V X5R, Y5V 1 uF to 22 uF ] High ripple current capability ] High reliability ECJ-3 1206 6.3, 10, 16, 25V X7R, X5R, Y5V 1 uF to 22 uF ] Non-polarity Capacitance Values

ECJ-Z 0201 6.3, 10, 16, 25V 0.5 pF to 0.22 uF 6.3, 10, 16, 25, ECJ-0 0402 0.5 pF to 0.47 uF 50V ] X5R, X7R, Y5V, Wide selection 6.3, 10, 16, 25, u ] Small case size (0201) ECJ-1 0603 C0K, C0J, C0H, 0.5 pF to 0.47 F 50V ] High reliability C0G, SL/GP Standard Standard 6.3, 10, 16, 25, ] Non-polarity ECJ-2 0805 27 pF to 0.47 uF 50V

Capacitance Values 6.3, 10, 16, 25, ECJ-3 1206 3300 pF to 0.68 uF 50V ECJ-G 0805 6.3, 10, 16V 1 uF to 4.7 uF ] H = 0.85 * 0.1 mm X5R u u Low 1 F to 10 F ] * Profile ECJ-H 1206 6.3, 10V H = 0.85 0.1 mm 2.2 uF to 22 uF

ECY-2 0508 10, 25, 50V 0.01 uF to 1 uF

X5R ] Very low ESR/ESL

ECY-3 0612 6.3, 16, 50V 0.1 uF to 10 uF Wide terminations Reverse-Geometry

ECJ-1__2A 100V 10 pF to 1000 pF 0603 ECJ-1__2D 200V 220 pF to 1000 pF

ECJ-2__2A 100V 10 pF to 0.015 uF ] Suitable for mid-voltage applications 0805 C0H, X7R ] High reliability ECJ-2__2D 200V 10 pF to 0.01 uF ] Non-polarity ECJ-3__2A 100V 1500 pF to 0.1 uF

Mid-range Voltages 1206 ECJ-3__2D 200V 470 pF to 0.022 uF

ECJ-3__2J 1206 630V C0H, X7R 100 pF to 0.01 uF ] Suitable for high-voltage applications High High Voltage

0201 0.1 pF to 5.6 pF ] Very high Q, at high frequencies (GHz) ] Tight tolerance ECD 25V C0G ] Wide range up to 15 pF with small

(High Q) 0402 0.1 pF to 15 pF steps between values Microwave

Multi-Layer Ceramic Chip Capacitors (MLCC) ] 2 capacitors in 1 pkg for low part ECJ-U 0405 6.3 ~ 50V C0H, X7R, X5R 10 pF to 1 uF number count

ECJ-T 0805 16, 25, 50V C0H 10 pF to 220 pF

]

Arrays 4 capacitors in 1 pkg for low part ECJ-T 0805 16, 25, 50V C0H, X7R, Y5V 10 pF to 0.1 uF number count

ECJ-R 1206 10, 16, 25, 50V C0H, X7R, Y5V 10 pF to 1 uF

14 Electronic Components Group

Operating Temperature Series Appearance Series Voltage Characteristics Capacitance Range Features ] Class I Dielectric with Temperature ECC-_HT____KG HT-KG SL/GP 10 pF to 470 pF Coefficient: +350 to -1000 ppm/dC ] Class II Dielectric with Temperature ECK-_HT____KB HT-KB500VDC Y5P 100 pF to 4,700 pF Coefficient: *10%

] Class II Dielectric with Temperature ECK-_HT____KC HT-KC Y5S 100 pF to 4,700 pF Coefficient: *22%

] Class I Dielectric with Temperature ECC-_3____KGE KGE SL/GP 12 pF to 470 pF Coefficient: +350 to -1000 ppm/d High Voltage C

1kVDC - ] Class II Dielectric with Temperature ECK-_3____KBP KBP Y5P 100 pF to 5,600 pF 3kVDC Coefficient: *10%

] Class II Dielectric with Temperature ECK-_3____KRP KRP Y5R 100 pF to 4,700 pF (AC, Pulse, and Low Loss Applications) Coefficient: *22%

ECK-_S____KB KB Y5P 100 pF to 4,700 pF ] From 6 mm to 14.5 mm in size 1kVDC - 3kVDC ECK-_3____MEH MEH Y5U 680 pF to 0.01 uF ] From 7 mm to 16.5 mm in size

10, 12, ECK-D4____MDV MDV Y5T 100 pF to 0.01 UF ] Very high voltage ratings 15kVDC High Voltage (DC Applications) ECC-T3 SL/GP 10 pF to 68 pF 1kVDC - ] Molded SMD case for Hi-V SMD 5kVDC reflow soldering ECK-T3 Y5P 100 pF to 470 pF

] UL/CSA/IEC X1/Y1 approval, ECK-_NA NS-A Y5P, Y5U 100 pF to 4,700 pF 4000 VAC for 1 minute

] UL/CSA/IEC X1/Y2 approval, ECK-_TS TS Y5P, Y5U, Y5V 100 pF to 0.01 uF Ceramic Capacitors 2600 VAC for 1 minute 250 / 440VAC

GP/SL 10 pF to 68 pF ] UL/CSA/SEMCO X1/Y2 approval, ECK-_VS VS 1500 VAC for 1 minute ] Y5P, Y5U, Y5V 100 pF to 4,700 pF 5 mm lead spacing

ECC-TBC SL/GP 10 pF to 68 pF ] UL(CSA)/SEMCO Y2 approval, BC 250VAC 1500 VAC for 1 minute ] ECK-TBC Y5P, Y5U, Y5V 100 pF to 4,700 pF SMD (7.1 x 6.3 x 2.5 mm)

ECC-TFC SL/GP 5 pF to 330 pF ] UL(CSA)/SEMCO Y2 approval,

Interference Suppression ‘Safety’ Capacitors Suppression Interference FC 250VAC 1500 VAC for 1 minute ] ECK-TFC Y5P, Y5U, Y5V 470 pF to 4,700 pF SMD, small size (5.7 x 4.5 x 2.3 mm)

15 Varistors & Thermistors

Max. Allowable Maximum ESD Type Part Number Case Size Varistor Voltage Voltage (DC) Capacitance [IE061000-4-2]

EZJ-ZZV120EA 12 V 6.7 V 47 pF max 0201 EZJ-ZZV270RA 27 V 16 V 20 pF max

EZJ-Z0V080KA 8 V 5 V 330 pF max

EZJ-Z0V120JA 12 V 6.7 V 220 pF max 0402 EZJ-Z0V270RA 47 pF max 27 V 16 V EZJ-Z0V270EA 20 pF max

EZJ-Z1V080KA 8V 5 V Low Capacitance 330 pF max EZJ-Z1V120KA 12 V 6.7 V 0603 EZJ-Z1V270GA 27 V 16 V 100 pF max EZJ-Z1V330GA 33 V 26 V

EZJ-ZZV800AA 0201 5 V 3 pF max

EZJ-Z0V80010 80 V 18 V 1 pF max Varistors EZJ-Z0V80015D 1.5 +_0.5 pF 5 V EZJ-Z0V500AA 0402 50 V

EZJ-Z0V800AA 80 V

EZJ-Z0V171AA 170 V 18 V Contact Discharge EZJ-Z1V80010 80 V Voltage: 8kV

Ultra Low Capacitance EZJ-Z1V500AA 50 V 5 V Air Gap Discharge 0603 Voltage: 15kV EZJ-Z1V800AA 80 V 18 V EZJ-Z1V171AA 170 V

EZJ-ZSV120JA 12 V 6.7 V 220 pF max

EZJ-ZSV270RA 20 pF max 27 V 16 V

rray EZJ-ZSV270EA 0504 47 pF max A 2 EZJ-ZSV800AA 80 V 18 V 3 pF max EZJ-ZSV171AA 170 V

EZJ-P0V080MA 680 pF max

EZJ-P0V080KA 330 pF max

rray 0402 8 V 5.6 V A

4 EZJ-P0V080GA 100 pF max

EZJ-P0V080DA 27 pF max

EZJ-ZSV270DA 27 pF

Varistor Arrays Varistor EZJ-ZSV270PA 33 pF rray

A EZJ-ZSV270SA 0504 27 V 16 V 39 pF er P 2 Varistors EZJ-ZSV270TA 43 pF 2 Capacitors

EZJ-ZSV270EA 47 pF

EZJ-S1VB822 12 V 6 V 8200 pF

EZJ-S1VC392 0603 30 V 18 V 3900 pF

EZJ-S1VD182 50 V 30 V 1800 pF Contact Discharge EZJ-S2VB223 12 V 6 V 22000 pF Voltage: 30kV

EZJ-S2YC822 0805 30 V 18 V 8200 pF High Capacitance Varistors EZJ-S2YD472 50 V 30 V 4700 pF

16 Electronic Components Group

Case Size (EIA) Operating Series Appearance LxWxH (mm) Electrical Characteristics Temperature Features

0201 Varistor Voltages: 12 ~ 80 VDC EZJ-ZZ Capacitance: 1 ~ 47 pF Max • Very small case size (0.6 x 0.3 x 0.3) 8 kV Max. ESD Capability

0402 Varistor Voltages: 12 ~ 170 VDC EZJ-Z0 Capacitance: 1 ~220 pF Max. -40 to 85 º C (1.0 x 0.5 x 0.5) 8 kV Max. ESD Capability • Small case sizes • Low capacitance loading 0603 Varistor Voltages: 12 ~ 170 VDC • Ideal for high speed signal lines EZJ-Z1 Capacitance: 1 ~ 330 pF Max. (1.6 x 0.8 x 0.8) 8 kV Max. ESD Capability

0504 Varistor Voltages: 12 ~ 170 VDC • 2 Varistors per array Zinc-oxide EZJ-ZS (1.37 x 1.0 x 0.6) Capacitance: 3 ~ 220 pF Max. • Part count reduction 8 kV Max. ESD Capability • Board space savings Array -40 to 85 º C • 4 Varistors per array 0402 Varistor Voltages: 8 VDC • Part count reduction EZJ-P0 Capacitance: 27 ~ 680 pF Max. (1.0 x 0.5 x 0.5) • Board space savings 8 kV Max. ESD Capability • Excellent ESD Suppression

Surface Mount Array

0603 Varistor Voltages: 12 ~ 50 VDC EZJ-S1 Capacitance: 1,800 ~ 8,200 pF Max. (1.37 x 1.0 x 0.6) 30 kV Max. ESD Capability Multi-layer Varistor -40 to 85 º C • High ESD capabilities Varistor Voltages: 12 ~ 50 VDC

Titanate 0805 Strontium Strontium EZJ-S2 Capacitance: 4,700 ~ 22,000 pF Typical (2.0 x 1.25 x .85) 30 kV Max. ESD Capability

Molded Case Varistor Voltages: 22 ~ 470 VDC • Flow (wave) / Reﬂow soldering ERZ-VF -40 to 85 º C (6.0 x 8.0 x 3.2) Max. Peak Currents: 125 to 300 A • UL (Pending)

• Large energy handling capabilities 5 to 20 mm Varistor Voltages: 18 to 1,800 VDC ERZ-VD -40 to 85 º C • UL / VDE / CSA Safety Certiﬁcations

Zinc-oxide Max. Peak Currents: 125 to 6,500 A Diameter Disc • QS9000 Surge Absorbers Surge Leaded ZNR Transient

Case Size (EIA) Operating Series Appearance LxWxH (mm) Electrical Characteristics Temperature Features

Nominal Resistance @ ERT-JZ 0201 -40 to 125oC (0.6 x 0.3 x 0.3) 2K ~ 1000K O

• Surface Mount 0201, 0402, 0603 0402 Nominal Resistance @ Power Dissipation • Highly Reliable ERT-J0 (1.0 x 0.5 x 0.5) 22 ~ 470K O 33 mW ~ 100mW • Multi-layer & Monolithic available • Lead Free (RoHS)

0603 Nominal Resistance @ ERT-J1 1 mW/oC ~ 3m W/oC Multi-layer (1.6 x 0.8 x 0.8) 22 ~ 150K O NTC Thermistors

17 Electromechanical

Type Series Appearance L x W x H (mm) Operating Force Features • Built-in actuator for consistent tactile performance Top Push 3.0 x 2.6 x 0.65 1.6 N (160 gf) EVP-AF • World’s smallest with actuator 1.0 N (100 gf) • Super small-sized, thin profile 1.6 N (160 gf) 3.5 x 2.9 x 1.4 • J-bent terminal Top Push 2.4 N (240 gf) EVP-AA 3.5 x 2.9 x 1.7 • Wide range of operating force 3.5 N (350 gf) • Long operating life 5.0 N (500 gf) 1.0 N (100 gf) • Compact/Thin Profile 4.1 x 4.1 x 0.38 1.3 N (130 gf) Top Push • Long-life: 1,000,000 cycles min. EVQ-P6 4.1 x 4.1 x 0.58 1.6 N (160 gf) • Optional push-plate for improved actuation 2.4 N (240 gf) 1.6 N (160 gf) • Thin Profile Top Push 4.5 x 4.5 x 0.55 EVQ-PQ 2.4 N (240 gf) • Sealing film for dust resistance 1.0 N (100 gf) 1.6 N (160 gf) • J-bent terminals EVQ-P2 4.7 x 3.5 x 2.5 2.4 N (240 gf) • Ground terminal optional Top Push EVQ-3P2 4.7 x 3.5 x 2.1 2.5 N (250 gf) • Middle Push: 0.7 mm 3.5 N (350 gf) • Short Push: 0.25 mm 5.0 N (500 gf) 1.0 N (100 gf) 4.9 x 4.9 x 0.8 • Optional push-plate for improved actuation Top Push 1.6 N (160 gf) EVQ-PL 4.9 x 4.9 x 1.5 • GND terminal included 2.6 N (260 gf) 0.5 N (50 gf) • Low cost 1.3 N (130 gf) 6.5 x 6.0 x 2.0 • Wide selection of height and force EVQ-P0 1.6 N (160 gf) Top Push 6.5 x 6.0 x 2.5 • Wide push plate for reliable actuation 2.6 N (260 gf) EVQ-Q2 6.5 x 6.0 x 3.1 • Over-stroke & GND type available 3.5 N (350 gf) • Long operating life 5.0 N (500 gf)

EVQ-3P 6.0 x 6.0 x 0.9 1st 0.7 N,2nd 2.6 N • Double action for Camera shutter function Double Action EVQ-PR 6.0 x 6.0 x 1.05 1st 1.0 N, 2nd 2.6 N • Push plate, Boss & Ground as options 1.6 N (160 gf) • High impact resistance Side Operated 3.5 x 2.9 x 1.35 EVQ-P7 2.2 N (220 gf) • Boss and L-terminal available 1.6 N (160 gf) • High impact resistance Side Operated 4.7 x 3.5 x 1.65 EVQ-PU 2.2 N (220 gf) • Straight or J-bent terminals 1.0 N (100 gf)

Surface Mount 1.6 N (160 gf) • Optional edge mount for ultra high impact EVQ-P4 6.2 x 3.5 x 3.0 2.4 N (240 gf) resistance Side Operated EVQ-P8 6.2 x 3.5 x 3.4 2.5 N (250 gf) • 0.25 mm, 0.70 mm travel 3.5 N (350 gf) • Life: 200 K to 1 Million cycles 5.0 N (500 gf) 1.6 N (160 gf) • Straight or J-bent terminals Side Operated 6.1 x 4.0 x 1.8 EVQ-PS 2.2 N (220 gf) • With or without positioning boss 2.0 N (200 gf) • Push travel: 1.0 mm, 1.3 mm EVQ-P1 2.2 N (220 gf) • Popular for automotive applications Long Travel 6.1 x 6.0 x 5.0 EVQ-9P 2.5 N (250 gf) • J-bent terminal 3.5 N (350 gf) • Large push plate for superior actuation • Ultra high force 4.0 N (400 gf) • Popular for automotive applications Long Travel 8.5 x 8.5 x 6.5 EVQ-Q1 5.0 N (500 gf) • Large push plate for superior actuation • J-Bent Terminal

Center Space, • World’s first open Center Space for LED EVP-AD 9.8 x 10.15 x 4.6 4.0 N (400 gf) • Long travel of 1.0mm Long Travel • 100K life 1.0 N (100 gf) • Compact and thin profile 5 Way 6.0 x 3.5 x 4.36 1.6 N (160 gf) EVQ-WH • Optional boss for stability 2.4 N (240 gf) • Compact and thin profile Push: 2.6 N 5 Way 7.7 x 7.7 x 1.75 • Long life EVQ-Q7 Leaning: 1.3 N • Dust-proof structure Light Touch Switches Light Touch EVQ-PA • Without ground terminal (EVQ-PA) Top Push 6.0 x 6.0 x 4.3 1.0 N (100 gf) • With ground terminal (EVQ-PB) EVQ-PB 6.0 x 6.0 x 5.0 1.3 N (130 gf) 6.0 x 6.0 x 7.0 1.6 N (160 gf) • With or without ground terminal Top Push EVQ-2 6.0 x 6.0 x 9.5 2.6 N (260 gf) • Wide selection of height and force 1.0 N (100 gf) EVQ-PE/ 6.0 x 3.5 x 4.3 • Narrow width for space saving Top Push 1.6 N (160 gf) 6.0 x 3.5 x 5.0 • SMT, bulk, radial-tape terminal types available PJ/PN/5P 2.4 N (240 gf) 6.0 mm dia. x 4.3 1.0 N (100 gf) • Radial Taping 6.0 mm dia. x 5.0 1.3 N (130 gf) Top Push • Forged terminals to improve mounting efficiency EVQ-11 6.0 mm dia. x 7.0 1.6 N (160 gf) • Round shape for improved packaging density 6.0 mm dia. x 9.5 2.6 N (260 gf)

0.74 N (74 gf) • Knob shape: De-centering, centering Top Push 6.2 x 6.2 x 7.0 EVQ-P0 1.3 N (130 gf) • Ideal for frequent usage such as mouse button 2.0 N (200 gf) • Push travel: 1.0 mm, 1.3 mm 2.2 N (220 gf) Top Push 6.1 x 6.0 x 5.0 • Forged terminals EVQ-PV 2.5 N (250 gf) • Large push plate for superior actuation 3.5 N (350 gf)

Through-Hole PC 7.5 x 7.1 x 9.25 1.0 N (100 gf) • Without ground terminal EVQ-PC 7.5 x 7.1 x 7.15 1.3 N (130 gf) Side Operated • Bulk (EVQ-PF) or radial taping (EVQ-PC) 7.5 x 7.1 x 7.85 1.6 N (160 gf) EVQ-PF PF • Wide selection of height and force 7.5 x 7.1 x 9.85 2.6 N (260 gf) { 7.5 x 7.1 x 12.35

8.0 x 8.0 x 5.0 0.8 N (80 gf) • Push travel: 1.0mm, 1.2mm, 1.75mm Long Travel EVQ-QJ 8.0 x 8.0 x 5.5 1.3 N (130 gf) • Long life: Self Cleaning 8.0 x 8.0 x 6.1 2.5 N (250 gf) • Quiet operation

18 Electronic Components Group

Type Series Appearance Dimensions (mm) Operating Force Features • Small/thin profile Mounting height: 1.5 mm 1HW Detector ESE-23 300 mN (30 gf) • Long over-travel Outer dimensions: 5.0 mm x 4.4 mm • Usable as an operation switch (an input device) Outer dimensions: • Compact/thin profile 2W Detector ESE-24 7.5 mm x 3.0 mm x 5.6 mm 350 mN (35 gf) • Long over-travel 7.5 mm x 4.65 mm x 5.6 mm • Usable as an operation switch (an input device) • Wiping contact construction 2 mm Size Mounting height: 4.1 mm ESE-22 300 mN (30 gf) • Operable in two directions: X-X or Y-Y Type 2N Vertical or horizontal • Extremely thin profile, SMD 2 mm Size Mounting height: 2.3 mm ESE-21 300 mN (30 gf) Type 2NV Outer dimensions: 3.4 mm x 3.8 mm

• Self-wiping leaf spring contact construction Detectors 5 mm Size • Pole position: 1 pole, 1 position ESE-11 Mounting height: 4.9 mm 350 mN (35 gf) Type 5N

ESE-13 Mounting height: 1.2 mm • For horizontal and vertical mounting (ESE-13) Super Thin Type 300 mN (30gf) ESE-18 Travel: 1.5 mm • For left and right side operation (ESE-18)

Type Series Appearance Life (cycles) Rotation Torque Features EVE-G EVE-H 30,000 (std. type) • Heavy rotation torque optional 12 mm Square GS 3 to 20 mN-m EVE-J 15,000 (high • Various shaft/bushing types available Encoders 10 to 50 mN-m EVE-K rotation torque) • Integrated push switch optional EVE-L • Low profile 11 mm Square GS EVE-R • Reflow Type 3.5 mm 30,000 3 to 20 mN-m Encoders EVE-V • Through-hole type 4 mm • Integrated push switch optional • Smooth operating feel with minimal wobble 16 mm Square EVE-P 1,000,000 3 to 25 mN-m • Integrated Switch High Grade • Long Life: 1,000,000 cycles minimum • 15 detents with excellent tactile response Encoders • Push-on switch with tactile response 1 to 10 mN-m Edge Drive Jog EVQ-WK 100,000 • Compact size, thin profile 4.5 N (push-on) • Reflow soldering available • Anti-electrostatic measures available • Open center space for LED and switch Center Space EVQ-V/W 30,000 3 to 20 mN-m • Allows for large knob design • Allows for transparent shaft for superior lighting effect

Type Series Appearance Life (cycles) Rotation Torque Features

• Dust-Proof Molded 7mm Thumbwheel EVL-HFA 10,000 0.5 to 6 mN-m • Compact Size

9mm Rotary EVU-E/F 10,000 1 to 20 mN-m • Multiple Bushing & Height Configurations EVJ- • Midpoint detent optional 12 Rotary 15,000 2 to 20 mN-m 01/02

12mm Dual Rotary EVJ-C/Y 15,000 2 to 20 mN-m • Dual output with accurate tracking

• Large diameter with smooth rotation Center Space EWV-Y 30,000 20, 25 or 30 mN-m

Potentiometers • LED integration optional

• Low profile, small size, long life 10mm Sensor EVWAE 1,000,000 3 mN-m max. • <3% linearity

Type Series Appearance Life (cycles) Features

EWA- • Compact size and wave-soldering type available 30,000 • High reliability K/M/N/P/Q • Available with: 15.0, 20.0, 30.0, 45.0 and 60.0 mm travel Standard • Excellent operational feel EWA-P1/Q1 30,000 • Low noise, long operating life, highly accurate attenuation • Light operating force available

EVA(B) • Thin and compact design: 8 mm body height & 15 mm width Thin 50,000 • Light sliding force and smooth operability JQ / NA Faders for • Highly accurate attenuation characteristics: more than 100dB max. Audio Mixers EVA-NF • Slim type fader series: 9 mm width; 8 mm height Mono 30,000 EVA-NE • Excellent cost performance

19 Wireless Modules

Receiver Operating Max. Power Frequency Number of Max. Data Series Appearance Dimensions (mm) Sensitivity Temperature Output Pwr Supply Range I/Os Interfaces Rate

300 - 1000 PAN2341 20.0 x 10.4 x 2.8 -110 dBm -40 to + 85dC 5 dBm 2.1 to 3.6 V 5 GPIO 76.8 Kbits/s MHz

300 - 1000 PAN2355 8.0 x 8.2 x 1.9 -100 dBm -40 to + 85dC 6 dBm 1.8 to 3.6 V - SPI 500 Kbits/s MHz

153.64 PAN2450 30.0 x 20.0 x 3.5 -92 dBm -40 to + 85dC 6 dBm 2.4 to 3.6 V 2.4 GHz 7 SPI, GPIO Kbits/s

ISM GPIO, PAN2551 26.5 x 20.0 x 3.0 -98 dBm -40 to + 85dC 0 dBm 2.1 to 3.4 V 2.4 GHz 29 250 Kbits/s 2x UART

300 - 1000 GPIO, I2C, PAN3550 26.0 x 20.3 x 3.0 -100 dBm -40 to + 85dC 6 dBm 1.8 to 3.6 V 14 500 Kbits/s MHz 2x UART

GPIO, PAN5460 38.0 x 22.0 x 3.5 -92 dBm -40 to + 85dC 6 dBm 2.4 to 3.6 V 2.4 GHz 23 2x UART, 2000 Kbits/s I2C, PWM

PAN1310 11.6 x 8.7 x 1.8 -86 dBm -40 to + 85dC 3 dBm 2.7 to 3.6 V 2.4 GHz - - 3 Mbits/s

PAN1311 11.6 x 8.7 x 1.8 -86 dBm -40 to + 85dC 3 dBm 2.7 to 3.6 V 2.4 GHz - SWOP 3 Mbits/s

GPIO, USB, PAN1450 18.7 x 13.4 x 2.2 -86 dBm -25 to + 85dC 4 dBm 3.0 to 3.6 V 2.4 GHz 30 PCM, UART, 723.2 Kbits/s SPI, JTAG

Bluetooth GPIO, USB, PAN1550 22.8 x 20.0 x 4.0 -86 dBm -25 to + 70dC 4 dBm 3.3 V 2.4 GHz 30 PCM, UART, 723.2 Kbits/s SPI, JTAG

PAN5375 29 x 15 x 4 -97 dBm -40 to + 85dC +20 dBm 2.3 ~ 2.7 V 2.4 GHz - SPI, HCI - nanoLOC

GPIO, UART, PAN4555 16.4 x 12.2 x 2.1 -98 dBm -40 to + 85dC 0 dBm 2.0 to 3.4 V 2.4 GHz 19 250 Kbits/s SPI

GPIO, UART, PAN4570 26.5 x 20.0 x 3.0 -97 dBm -40 to + 85dC 5 dBm 2.1 to 3.6 V 2.4 GHz 17 250 Kbits/s SPI

A/D, VART, PAN4661 New 35 x 15 x 3.5 -105 dBm -40 to + 85dC 20 dBm 2.7 ~ 3.3 V 2.4 GHz 33 I2C, SPI, 250 Kbits/s Mesh Networking PWM

A/D, VART, PAN4666 35 x 15 x 3.5 -112 dBm -40 to + 85dC 20 dBm 2.7 ~ 3.3 V 2.4 GHz 40 2000 Kbits/s New I2C, PWM

GPIO, ADC, 868.42 / PAN8550 27.0 x 13.0 x 3.0 -92 dBm -20 to + 70dC 3 dBm 2.1 to 3.6 V 10 UART, PWM, 40 Kbits/s 908.42 MHz Triac Z-Wave

20 Electronic Components Group

PAN2341 PAN2355 PAN2450

PAN2551 PAN3550 PAN5460

PAN1310/PAN1311 PAN1450 PAN1550

PAN5375 PAN4555 PAN4570

PAN8550

21 DC-DC Converters for AC Applications

Input Voltage Output Voltage Output Input Output Vin (DC) Vo (DC) Current Power Capacitor Capacitor Inductor P/N (Min.) (Typ.) (Max.) (Min.) (Typ.) (Max.) (Max.) mWatts (uF) (uF) P/N

EHD-RD3317 144 170 195 4.7 5 5.4 90 mA 450 22 100 ELC-11D561F

EHD-RD3305 113 141 170 5.6 5.9 6.1 200 mA 1180 33 220 ELC-11D471F

EHD-RD3323 90 141 170 11 12 13 100 mA 1200 33 100 -

EHD-RD3338 113 141 170 14 15 16 80 mA 1200 33 100 -

EHD-RD3333 225 282 338 14 15 16 100 mA 1500 33 100 ELC-12D681E

EHD-RD3311 113 - 203 4.7 5.1 5.4 300 mA 1530 33 330 ELC-12D471E

EHD-RD3356 113 141 170 18.5 20 21.5 80 mA 1600 33 100 -

EHD-RD3353 113 141 170 18.5 20 21.5 100 mA 2000 33 100 -

EHD-RD3360A 250 310 391 22 24 26 100 mA 2400 33 100 ELC-12D222E

EHD-RD3324Y 113 141 190 11 12 13 200 mA 3000 33 220 ELC-11D681F Positive EHD-RD3334 113 141 170 14 15 16 200 mA 3000 33 220 ELC-11D681F

EHD-RD3326 113 141 170 11 12 13 300 mA 3600 33 220 ELC-12D561E

EHD-RD3357 113 141 195 18.5 20 21.5 200 mA 4000 33 220 ELC-11D122F

EHD-RD3332A 105 141 170 14 15 16 300 mA 4500 33 220 ELC-12D561E

EHD-RD3371A 225 282 338 11 12 13 400 mA 4800 33 470 ELC-12D102E

EHD-RD3362B 113 141 170 23 24.6 25.5 200 mA 4920 33 220 ELC-11D102F

EHD-RD3325M 113 141 170 11 12 13 500 mA 6000 47 470 ELC-12D331E

EHD-RD3354 113 141 170 19 20 21 300 mA 6000 33 470 ELC-12D102E

EHD-RD3306 -113 -141 -170 -4.75 -5.1 -5.35 -30 mA 153 33 100 -

EHD-RD3359 -85 -141 -170 -4.7 -5 -5.3 -200 mA 1000 33 150 ELC-11D681F

EHD-RD3318 -113 -141 -170 -4.5 -5 -5.5 -300 mA 1500 33 220 ELC-12D471E

EHD-RD3381 -113 -141 -170 -11 -12 -13 - 150mA 1800 22 150 ELC-11D102F

EHD-RD3320 -113 -141 -170 -11 -12 -13 -200 mA 2400 33 220 ELC-11D821F

EHD-RD3370 -113 -141 -170 -11 -12 -13 -250 mA 3000 22 220 ELC-11D102F Negative EHD-RD3470 -113 -141 -170 -31.5 -32 -32.5 -100 mA 3200 33 100 ELC-11D152F

EHD-RD3363 -113 -141 -200 -22.5 -24 -25.5 -180 mA 4320 33 220 ELC-11D102F

EHD-RD3471 -113 -141 -170 -31.4 -32 -32.6 -150 mA 4800 33 330 ELC-11D152F

EHDRD

Vout Vin L1 L2

R C1 Load C2 L1

22 Electronic Components Group

23 Panasonic Industrial Company Components Group 3 Panasonic Way (7H-2) Secaucus, NJ 07094 1-800-344-2112 http://www.panasonic.com/industrial/components

SFC_0608 Printed 06/08