54 THE CUTTY SARK: STEP BY STEP , 103 395 and , to the 93 . The . and the to the 391 394 with the 308 . Fit the , 356 382 392 395 394 308 390 302 , , make the , make 389 108 381 , and the double hook , 390 391 388 to end in a belay pin . Rig the mizzen fore 108 348 , , 396 100 387 , following the plans for the the plans , following , the mizzen gaff , the mizzen 308 , . Fit the gilt chain . Fit the gilt 393 386 located on the deck, and the red located on the deck, and 153 355 and to the stay on the rounding of and to the stay , , following the direction of the , following the direction 109 with the fine raw thread with the fine With parts parts With 109 386 394 302 392 395 Use the mast and rigging plans alongside these Use the mast and rigging step-by-step instructions. boom and the gaff on the fore trysails gaff on the fore trysails boom and the with the fine raw thread sew this sail boom the mizzen help of the small rings on the mizzen gaff trysail taking into account the coloured arrows, while arrows to be tied on yellow, white and violet pin-rail the belay pins of the circular to be tied to the green and blue arrows are eyebolts arrow is to be threaded through a hole in the arrow is to be threaded small clump block in the pin-rail on the mizzen rigging in the pin-rail on the mizzen mizzen boom mizzen gaff mainmast mizzen fore trysail masts. Sew the gaff 53 diam. 4mm 109 108 395 390 394 391 diam. 4mm 109 348 308 392 109 diam. 4mm 153 390 386 109 308 308 348 348 190mm 153 390 348 308 386 125mm 308 90mm 392 355 393 Boom, gaff and fore trysail of the mizzenmast of the fore trysail gaff and Boom, 389 389 381 381 389 381

353

387 388 388 388 387

387 53 55 THE CUTTY SARK: STEP BY STEP 108 396 302 348 396 See the previous page for page the previous See 109 308 Continued. Continued. instructions. written 53 diam. 1mm diam. 1mm 108 348 396 diam. 3mm 348 308 109 395 302 153 308 395 396 348 308 108 395 108 109 308 109 394 108 153 348 300 382 348 308 100 308 348 308 108 308 308 302 348 348 348

Boom, gaff and fore trysail of the mizzen, continued mizzen, of the fore trysail gaff and Boom,

395 103 360 372

356 53 109 56 THE CUTTY SARK: STEP BY STEP 108 109 397 393 108 397 308 302 103 308 284 308 308 338 397 108 . 332 341 308 109 393 , and sew 332 103 308 348 . Rig the fore trysail 341 108 with the fine raw thread 308 308 153 393 308 109 308 393 348 348 348 397 302 , the violet arrows to be tied to the belay 339 , located at the jaw of the trysail , and the green arrow to be tied to the eyebolt 339 109 284 103 to the mainmast gaff 397 108 108 308 397 308 Gaff and trysail of mainmast and trysail Gaff 339 302 308 to the stay on the rounding of the mainmast of the circular pin-rail 308 103 103 , following the direction of the coloured arrows – the yellow arrows to be 109 397 308 348 348 348

332 338 308

of the side pin-rails on the mainmast

Sew the mainmast fore trysail Fit the gaff with its sail into the eyebolt 103 located on the deck.

339 54 pins 109 Use the mast and rigging plans alongside these step-by-step instructions. of the mainmast tied in the belay pins

this sail with the thread 54 57 THE CUTTY SARK: STEP BY STEP 398 356 399 348 308 398

348 399 14mm

108 14mm 108 308 100 398 308 108 348 103 308 398

308 338 100 14mm 14mm 108 108 399 308 100 103 100 , 103 399 308 and the (one is tied and 356 103 398 284 398 and the mizzen located in the lower 398 100 , securing them with the 399

. Rig both sails 108

Staysails between the mainmast and the mizzenmast and the mainmast the between Staysails of the circular pin-rail of the side pin-rails on the mainmast

On the stays located between the On the stays located between fit the mainmast and mizzen masts, 103 103

, the red arrows to be tied on the belay 55 Use the mast and rigging plans alongside these step-by-step instructions. to the port pin-rail and the other to the starboard pin-rail). See the next page for more step-by-step photos. yellow arrows to be threaded through a hole in the small clump blocks rigging to end in the belay pins pins 284 following the direction of the coloured arrows. The violet arrows are to be tied on the belay pins 55 topgallant staysail mizzen topmast staysail small rings 58 THE CUTTY SARK: STEP BY STEP 402 and the on the and on the stays 401 103 to the 401 , 400 400 , following the 400 308 and the second through , fixing them with the to be tied onto the belay located on the mainmast 338 402 See the previous page for page the previous See to the belay pins 348 100 of the side pin-rails on the . Rig the sails 402 ; the red arrows are to go through located on deck, the arrows for the located on the lower rigging. See 108 103 283 and of the circular pin-rail on the mainmast 109 Fit the main stay topsail located between the foreyard and Continued. Continued. instructions. written 100 401 103 .The yellow arrows are to be tied in this pins the 3mm blocks direction marked by the coloured arrows: the violet arrows are to be tied onto the dowels belay pins foreyard 339 order – the arrow for the sail eyebolt sails small rings with the fine raw thread top stay main mast mainmast, fit the topgallant staysail 56 the clump block foretop, and then both through the clump blocks the next page for more step-by-step photos. Use the mast and rigging plans alongside these step-by-step instructions. port and starboard sides, the first going through the cap of the mast 55 348 348 356 103 308 308 348 308 308 103 103 400 401 348 308 402 284 398 338 100 399 103 308 308 108 103 108 348 308 100 Stay sails between the foreyard and mainmast 100 401 400 100 308

Staysails between the mainmast and the mizzenmast, continued mizzenmast, and the mainmast the between Staysails 103

338 109 338

55 56 59 THE CUTTY SARK: STEP BY STEP 348 348 339 103 308 308 308 348 308 See the previous page for page the previous See 108 308 108 108 Continued. Continued. written instructions. written 400 56 401 103 402 308 400 100 109 100 338 308 308 308 109 283 103 308 308 308 308

401

402 14mm 400 338 100

108 103 14mm 108 308 308 338 308 108

103 400 Stay sails between the foreyard and mainmast, continued and mainmast, foreyard the sails between Stay

109 308

100 56 60 THE CUTTY SARK: STEP BY STEP 109 348 364 116 308 103 348 348 308 308 and 103 348 109 108 , fit the bowsprit 403 405 108 103 308 and through the 3mm block 404 364 116 . On the flying jib 116 103 . Secure the sails to the corresponding stays

308

405 403 14mm 348 108 364

, rig the boom halyard, starting from the eyebolt 14mm of the bowsprit pin-rail 308 103 308 , leaving a 14mm gap between them. Rig the three sails, following the 348 108 and the fore topmast staysail Boom halyard and jibsails halyard Boom 404

348 308 109

passing the thread through the hole located on the boom With the fine raw thread

, tying off in the belay pin

348 57 by means of the rings Use the mast and rigging plans alongside these step-by-step instructions. coloured arrows (see following Step 58).

348 stays, the jibsail 57 61 THE CUTTY SARK: STEP BY STEP 103 404 and are 405 348 , the blue , the jibsail 116 103 403 403 404 308 of the foremast. located on both sides of the 103 , following the direction of the 103 405 , rig the flying jib 403 308 of the bowsprit pin-rail 404 348 103 405 348 With the fine raw thread and the fore topmast staysail 103 and are to be tied on the belay pins 348 arrows are to be tied to the belay pins bow forecastle, and the red arrows are to go through the 3mm blocks bow forecastle, and the red arrows are to go through 348 instructions. Use the mast and rigging plans alongside these step-by-step coloured arrows. The yellow arrows go through the blocks coloured arrows. The yellow arrows go through to be tied in the belay pins 58 103 348 405 348 103 103 308 348 404 348 116 103 348 348 308 Jibsails, continued Jibsails, 404 403 348 403 308

405

404 348 403 348

348 58 62 THE CUTTY SARK: STEP BY STEP 401 402 100 308 384 384 100 100 344 384 in 100 make the foresail 384 308 that are to be joined together with 384 Foresail mast backstays mast Foresail 101 101 . See the next page for more step-by-step

308

mast backstays (yellow arrows), the mainmast foretop With the medium black cotton thread

59 Use the mast and rigging plans alongside these step-by-step instructions. the fine raw thread photos. the foresail yard chainwales

backstays (red arrows) and the small mainmast foretop backstays backstays (red arrows) and the small mainmast foretop blocks (blue arrows). All these lead out of the small clump 59 63 THE CUTTY SARK: STEP BY STEP 401 402 384 384 344 400 100 401 384

Foresail mast backstays, continued backstays, mast Foresail See the previous page for written instructions. 101

384 308 338 108 344

Continued.

59

Use the mast and rigging plans alongside these step-by-step instructions. Use the mast and rigging plans alongside these step-by-step 59 64 THE CUTTY SARK: STEP BY STEP 384 100 384 100 359 359 384 384 384 102 384 308 on the mainmast chainwales 100 344 384 (see previous step). With the same 308 384 , make the backstays in the mainmast (yellow 384 384 100 384 344 384 384 Backstays on the main and mizzenmast the main on Backstays

, make the backstays on the mizzenmast (violet arrows) and the backstays for the mizzen

384 arrows), the backstays on the mainmast (red arrows), and the backstays on the topgallant mast With the medium black cotton thread 102 384 308 108

that are to be joined together with the fine raw thread

338 60 102 thread Use the mast and rigging plans alongside these step-by-step instructions. topgallant mast of the mainmast (green arrows). All these procedures are to be carried out both on topgallant mast of the mainmast (green arrows). All these procedures are to be carried out both the port and starboard sides. of the mainmast (blue arrows). All lead out of the small clump blocks 60 65 THE CUTTY SARK: STEP BY STEP 308 308 93 308 357 103 356 343 308 354 343 103 308 308 103 (for the 356 out of the hole in the caps 308 334 308 109 103 308 308 338 , rig the mast top-ropes (red arrows for the mainmast and (for the main and foremasts, red arrows) and 308 339 339 308 103 308 343 343 308

Top-rope on the mainmasts and togallant mast togallant and the mainmasts on Top-rope , insert it through the hole located in the base of the masts and thread it through the on the other side of the caps and down to the deck, tying them off on the belay pins

357 foremast, pink arrows for the mizzenmast). Run the thread With the fine raw thread 343 and

61 61 338 block Use the mast and rigging plans alongside these step-by-step instruction. located on the circular pin-rails mizzenmast, pink arrows). Rig the mast top-ropes in the masts in the same way, taking into account that the green arrows are for the main and foremasts and the yellow arrows for the mizzenmast.