Model 6100 Assembly Instructions My First Piano Tutor Schoenhut® Piano Company, 6480B US1 North, Saint Augustine, FL USA Phone 904-810-1945 Fax 904-823-9213 Email
[email protected] Website www.toypiano.com “Manufacturer of Toy Pianos since 1872” Schoenhut® Piano Company Page 1 all rights reserved © 2011 Printed in China WARNING! This product must be assembled by an adult prior to play. Unassembled parts may have sharp edges which could cause injury. The piano and bench are designed for use by a child. Inspect the hardware periodically for tightness and integrity, tightening or replacing any loose parts. Parts Piano body Bench seat Piano Crosspiece leg support 7” Bench Legs (two) Piano Legs (two) 6.25” Bench Legs (two) Music Stand Long Screws (ten) Song book and color strip Short Screws (four) Learning System book Barrel Nuts (fourteen) Microphone (one) Pedal (one) Power Adapter (one) Assembly Alert: Hardware is located inside the Styrofoam packing material Step1: Insert barrel nuts into the top portion of the (2) sets of piano legs. Use (2) long screws to attach the piano leg to the piano body. Repeat this for other side. Step 2: Insert (4) barrel nuts into the crosspiece. Use (4) long screws to attach the piece onto the piano legs. Step 3: To put the bench together, you will insert barrel nuts into the holes of each bench leg. Place (1) 7 inch bench leg and (1) 6.25 inch bench leg together so that they make “V” shape. Attach these together using (2) long screws. Do the same for the remaining (2) bench legs.