Price List May 2021

Currents

Price List October 2021 Table of Contents Currents

Introduction Knoll and Sustainable Design 2 Introduction to Currents 3 Currents Textiles 5 Currents Color Program 6 Currents Legacy Finishes 7 Introduction to Upstart 8 Original Upstart Planning Examples 9 Upstart Color Program 11 Upstart Legacy Finishes 12 Service Walls and components Service Wall frames 13 Fence frames 14 Crown and raceway covers 15 Structural base cover kits 16 Access covers 18 Wall ends and connectors 25 Wall frame accessories 31 Spine ends and connectors 33 End Starters 35 Panel system starters and T-ends 36 Panel system starters for Dividends Horizon 40 Power, data and communications components for Service Walls 41 Screens and add-up panels Mobile screens 49 Add-up panels 50 Add up glass panels, for spine 51 Worksurfaces Worksurfaces, universal 52 Currents Stiffeners 58 Cascade edge worksurfaces 59 Worksurface, samples 65 Worksurface supports 66 Floorstanding storage Pedestal accessories 67 Counter Surface Counter surface 69 Upstart table desks and storage Upstart Tables 70 Plannable Upstart Tables 75 Accessories 84 Upstart Privacy Screens 85 Wall Mounting of Knoll Products 86 Alpha-Numeric Index 88 Selling Policy 91 KnollKey Lock Program 94 General Ordering Information 95

Each year Knoll sets key initiatives in the journey to sustainability. Focused on our impact to people and planet, Knoll reports material health product attributes and sets operational targets to reduce greenhouse gas emissions, waste generation and water use (in our North American facilities.) Material transparency is a core Knoll sustainable design value, enabling us to optimize the design and performance of our products. Our material health program utilizes independent third-party certifications that provide an impartial and trustworthy foundation for industry-wide transparency. Certification by respected third parties ensures that all manufacturers are held to the same high standards. Knoll certifications include: Forest Stewardship Council (FSC௡), Intertek’s Clean Air Program, Business and Institutional Furniture Manufacturer’s Association (BIFMA) LEVEL௡ certification, International Living Future Institute’s (ILFI) Declare labelling and Certified Environmental Product Declarations. In addition, Knoll is aligned with the U.S. Green Building Council and can help organizations achieve credits for Leadership in Energy and Environmental Design (LEED௡), WELL and the Living Building Challenge (LBC) building certifications. In our manufacturing operations, we focus on efficiency and impact. Knoll Office and Knoll Europe manufacturing locations are ISO 14001:2015 certified. Knoll sets objectives and targets to reduce energy, water and waste. These initiatives are part of a long-term strategy to further reduce energy consumption and lower our carbon footprint. We also believe in helping our customers find viable options when decommissioning furniture or other related assets. ANEW’s Full Circle Program, in partnership with Knoll, allows customers to leverage buy-back and re-sale programs as well as explore options for repurposing or recycling that mitigate landfill impact through energy-from-waste conversion. For more information about Knoll and sustainable design, visit www.knoll.com/environment.

2 Introduction to Currents Currents

Currents creates dynamic, advanced performance work environments from coordinated, independent elements – Service Walls, Fence frames, plannable desks, mobile storage – and existing Knoll office products. Currents workspaces may be spine-supported or freestanding, or planned in combination with conventional panel systems.

3 Introduction to Currents Currents

$Qe8Wl5QLUQN8N_^l0W8l^U85FA86l &8WdF58l,1JJ^l50N_FJ8d8Wl bWW8N_^l&8WdF58l,1JJ^lCWLl_E8l ^8U0W0_8Jg l NQJJlbNFd8W^0JllQWl -QWI^b\058l^bUUQW_^l0N6l^g^_8L^l eQWI^b\058^lbUl_QllQWlUWQdF68l ^_Wb5_bW0Jl5QW8l0N6lUWFL0WglU0_ElQ9l lUQe8Wl5QLUQN8N_^lL0gl48l U0N8J^lL0gl48l5QNN85_86l_Ql_E8l 8N6l^bUUQWal58l CWl5QLUb_8Wlb^8l0^l_E8lUWFL0WgleQWIl eQWI^b]058 lN6l^bUUQWal4W05I8_^l lCWl^80_86ldF^b0Jl0558^^llCWl 04Qd8lQWl48JQel_E8leQWI^b\058 l#N8l 05_FdF_g l88Ul5QM8W^l0W8l^E0U86l

4 Currents Textiles Currents KnollTextiles

Approved for Wall covers, Additional textiles are Dapper Masquerade Tabloid f mobile screens and available on linkable screens Delite Melange Tempest privacy screens and stackable add-up Demure Melody ࠗfr Theory ࠗfr panels: see Morrison price Diva Menagerie Tight Rope ࠗfr Fabric Group10 list for approved fabrics. Djenne Meroe Tilden ࠗfr Annex (W1360) Double Agent ࠗfr Midpoint Tinge ࠗfr Beacon (W1597) Customer’s Own Material is Dristi ࠗfr Milestone Topography Broadcloth II (W1619) subject to an application Dune Mod Plaid Topos Circuit (W1754) testing fee of $750 per fabric Durand Monarch f Totem Element (W1077) and a $2500 fee for UL Dynamic Moto CR Tower Grid Messa (W20611) testing. Fabric requirements Earthwork f Nature Walk Treble CR Pivot (W1926) - application test, 10 yards; Eclat Weave Night Life Trophy Symbolic Details (W693) UL test, 15 yards. COM is Entouragef Noble Tryst Skylark (W1718) also subject to extended Entwine North Island Ultrasuede f Tailor Made II (W1610) leadtimes. COM panels are Essence Obi Utmost II Twister (W1923) priced at Group 10 plus cost Fancy Twill Origins Utopia Versatility (W432) of fabric. Ferry Palisade Utrillo Fabric Group 20 Approved textiles for Fibra Panache CR Vatera Circle Line (W1146) Currents Mobile Pedestal Firefly Paradigm Venue Criss Cross (W305) Cushion Forza ࠗfr Pedal Pusher ࠗfr Versa f Delite (K2026) Fox Trot CR Petite Floral Versatility Edo (W2111) Abacus f Framework f Pogo f Vibe II ࠗfr Infinite (K2263) Aegean Galla II f Prairie ࠗfr Vice Versa Logic (W1318) Alignment f Gibson Prepf Vinyl ࠗfr Mainframe (W1783) Arno f Glider Presto f Westwood Nematic II (W1620) Aswan Grande Prim f Whip Photon II (W1695) Atelier Grandview Quark Wit Ponder (W2382) Atlas Greenwich Radiance Woodland II Reflect (W884) Attire Haze Ransom f Yeni Axiom ࠗfr Heavy Metal Rattan Zari CR Fabric Group 30 Backdrop Helios Reflect Zipline f Match Point (W1145) Bank Shot f Highland Regard CR Zoom Micro (W465) Baxter Holbrook Retreat Relay (W1020) * Beacon Hologram Ricochet f Pedestal cushions are Belize Hourglass Rio upholstered (from the front to Fabric Group 40 Biota f Hudson Rivington the back of the pedestal) Amplify (W1215) Biscayne Icon Roam with the fabric direction Bandwidth (W1219) Bistro f Ikat Stripe Roundtrip f matching the textile sample. Crossroad (K2085) Bocce f In Step Rush Hour Hourglass (K1523) Approved Spinneybeck Boundary f Innuendo Sahara CR Palladium (W1030) Leathers for Currents Buzz Intrigue Sandpiper CR Spellbound (W1464) Mobile Pedestal Cushions Cairo Island Sequin CR Fabric Group 50 Cameo Jasmine Serendipity Alaska Presto (K1000) Cato Journeyf Shadow Play Amazon Century Kampala Sherman Andes Fabric Group 55 Chameleon Katazome Sinclair Arizona Ransom (K1298) Chance Keaton Smart ࠗfr Cervo Ransom (K2398) Charm Kimono Soireef Copenhagen Chiseled Cordovan *Screen only Kingston Soliloquy Chroma f Knoll Felt f Sonnet f Derby Textile and leather grades Chronicle f Knoll Hopsack f Soon Distressed are found in the Office Circa Kora CR Spark f Ducale Seating Textile Matrix and Classic Boucle f Lagos Spencer Ducale Velours Office Seating Leather Close Knit Legend CR Spree f Espan˜a Matrix. Common Ground f Liberty Stacks Maremma Commuter Cloth f Limani Star Struck Marissa Compass CR Looped In Stepping Stones Prima Comaro Lore CR Striae Stripe Riva Coterie Ludlow Stripe It Sabrina Cross Tech Lyric Summit Saddle Crossroad Magnolia Suttonf Salon Cuddle Stripe Mariner Swing Velluto Pelle Dahlia CR Marquee Synth f Volo

C = approved for use on credenza cushion P = approved for use on mobile pedestal cushion f = CAL 133 Pre-approved ࠗfr Fire Retardants Chemicals

5 Currents Color Program Currents Currents Finishes

%(0 $ **0 3jKG]MhmKRe]xYKxOim@bbeKG}xzhcKmx

""0 $*0 +( #0 *+!*0 ( +*0 %( ,(($+*00 $0 $0 *,)*0 .%( *,(0 ,+(0 ""0 %,+( +%(0 +%(0 $0 0 -( %(0 /0 %-(*0 (*0 (%$+*0 **0 *"-*0 *00 0 L[WL+[y{+L{Ca[H 0 vWZ{<[{L 0 nhf 0` nyZLI#r nyZLI4DI E^#nL = 0` !hW !ha^y{hfL#nL 0` (L{aB^ 0` +LI[~cZLw +LI[~c#nL = 0` +LI[~c+L{?aa[H#nL ( 0 +[Hnh%L +[Hnh4DI -?|CZLw -?|C+?kaL 0~d[HL ! 4DIy{hfL 0` 4[aLn 0 4hV#r + 0` 5p[c#nL 9Aaf~{ 7` +?kaL5LHZWn?[f +

7` ZLw 5LHZWn?[f 2 7 +?g\L ,"+0+( #0 $%(#+ %$0 ( #0 (/0 ]xzYK]ezKXm@bGhbhmOimhm_x}t@GKJKx_@eJhm_z@FbKzhjKJXKchF]bKxGmKKex@eJ@JJ}jj@eKbzm]cjm]@GxGmKKe@eJ]eJhzm]c jKJKxz@bj}bbx ! 0 @bbOq@cKx@eJJm@Kmx]ezKm]ho@bbxGmKKexzhm@XKXb]JKx@eJG@xzKmx +0(/0 cF]Kezb]XYzx ($*",$+0(/*+"0 RFKmXb@xxx}u@GKxUmchF]bKxGmKKex@eJ@JJ}jj@eKbx 6YKeKhmKRe]xY @m_$mK]xehz@c@zGYzhzYK}mmKezx*KX@GRe]xY.8'z]x@c@zGYzhzYK]]JKeJx*KX@GRe]xY > 6YKeKhmKRe]xY ,KJ]}c$mK]xehz@c@zGYzhzYK}msezx*KX@GSe]xY.)'z]x@c@zGYzhzYK]]JKeJx*KX@GRe]xY>

$(0 $ **0%(0,(($+*0.%( *,)*0$0*+%(0(%$+*0(0- "!0+(%,0,*+%#0(%,+0 -!%&#$+0

%%0 $ **0 .KGhJKxFKX]e]zY@zYmKKJ]X]ze}cKm]GxKl}KeGKOibbhKJF@bKzzKmx}Q @GYbKzzKmx}NT"mKjmKxKezx@J]NPmKezGhcF]e@z]hehMjhmKRbbhjz]hex @eJXbhxxbKKbx

"%**0 -!0 ""0 -!0 0'+ %$*0%(0$(*0 *h$bhxx bhxKJ1hmK :// hcjbKcKz@m ,KJ]}c$bhxx bhxKJ1hmK 3>. :hhJhcjbKcKez@m3ezYKz]G &]XY$bhxx bhxKJ1hmK :1*> ;hhJ1b JXK 31*> 3ezYKz]G1b JXK *h$bhxx /jKe1hmK ,KJ]}c$bhxx /jKe1hmK 1b JXK@@]b@FbKhe]mGY hm_x}u@GKx &]XY$bhxx /jKe1hmK

6 Currents Legacy Finishes Upstart

NJ[Ic0I.c,<c ,JII0,UJNTc&I.c UN&@;>UcD0;Tc ,JII0,UJNcUJLc,<c D0;Tc,JNI0Nc !'ED &I.c N&,0[&_c,JZ0NTc D0;Tc.0TBcT,N00Ic UNW,UWN&Ec [JNBcTWQ&,0c ,D&GLTc "JNB &T0c NJ[Ic *N&,B0UTc&I.c [@I.J[c9&G0Tc UJN&;0c UJN&;0c TWS&,0Tc ,JZ0NTc JZ0NTc JWUN@;;0NTc U0^UWN0.cJID_c 4PJIUTc &T0Tc D&TU@,c&G@I&U0Tc @;>UcN0_c c WG@,0c c "@IU0Nc=0_c D&U0c IJ[c c JDBTUJI0cN0_c 0&N]JJ.c c @*0Nc &I.c c 0.@WGcN0_c c J2Uc;N0_c c

#JJ.cN&@Ic D0&Nc&LD0c c X&G@I&U0Tc

0I00NcNJWLc c &LD0c G0N@,&Ic,>0NN_c [email protected]&>J;&I_c

&@IUcNJWLc c 0U&DD@,cD@IUcc c c c c c c @;>UcG0U&DD@,c;N0_cc 0.@WGcG0U&DE@,c=0_cc &NBcG0U)D@,c;N0_cc @;>UcG0U&DD@,cU&Icc 0U&DE@,c*0@;0cc J2UcN0_c 0.@WGcN0_cD&U0c % c % c % c &WL0c DWG@IWGc c

&@IUcNJWLc c @DZ0Nc c c c c c c ">@U0c c c c c M0-A3`cF0<&-`c7IAT?0TcVKcH&V-?c0^ATVAI

OAHc

7 Introduction to Upstart Upstart Limited Availability

4511F7<= 8=F.F=57

!#) 7<= 8=F<#8%%4

## !#) ).&). + .) .(. 8 #0%=F/5.4

$)$ ) )!)!#) )')) !) #$!$) )')) ) #$!$) -%F786$?#=

8 Original Upstart Planning Examples Upstart Limited Availability

Basic stand-alone Y desk Oval table with Y desk Curved wiper with Y desk • the core Upstart application • 36Љ x 66Љ oval table • wiper 66Љ W • 30Љ x 72Љ nominal shown; • 30Љ x 72Љ Y return • 30Љ x 72Љ Y return conference depth is approximately 36Љ

Y desk with 42؆ round table Rectangular table with • conference table Y and M back-to-back, with bracketed return surface 42؆ conference tables • 72Љ x 76Љ approximate footprint • optional work shelf

Y desk with tripod table • 30Љ x 72Љ Y desk, work shelf, and mobile pedestal

Dual-monitor M desk workstation • 72Љ x 100Љ approximate footprint • optional work shelf • flat ends allow placement along wall

Dual-monitor M desk with tripod table • 30Љ x 72Љ nominal M desk

Y desks back-to-back, with half-round shared table • please note 1.75Љ setback from the back edge of each top to module line, same as Currents desks.

9 Original Upstart Planning Examples Upstart Limited Availability

Y desk with Upstart storage Extended corner desk and tower • 72Љ x 96Љ footprint • 72Љ x 72Љ footprint • 72Љ table with screen • 48Љ and 72Љ screens • mobile pedestal and tower • mobile pedestal and tower

Extended corner desk and adjacent worktable Upstart 120؇ planning • 72Љ x 96Љ footprint • group of three 120° corners • 72Љ x 48Љ corner and 48Љ straight desks • 48Љ shared privacy screens • mobile pedestal and privacy screen • mobile pedestals

U-shape plannable desks • 96Љ x 96Љ footprint • two 48Љ x 72Љ extended corners Upstart work group • mobile pedestal and tower • 120° corners and shared worktable 48 x 24Љ • 72Љ privacy screen • mobile pedestals and towers • 48Љ privacy screens

10 Upstart Color Program Upstart Upstart Finishes Limited Availability

Core finishes Specify Core finishes for all new customers

Table legs, Plannable screen Plannable Upstart Upstart brackets, Upstart Upstart Worksurface Worksurface Core Legacy magnet rail Worksurfaces Worksurfaces edges edges 611 Beige Mist Metallic · 118 Bright White ····· 112 Brown · 123 Brushed Grey ·· 122 Brushed Sand ·· 113 Dark Grey Y3 · 128 Fog ···· 114 Folkstone Grey LA/U ····· 111 Jet Black ····· 124 Medium Cherry ·· 115 Medium Grey Y2 · 612 Medium Metallic Grey J · 121 Micro Grey ·· 129 Micro Sand ·· 126 Natural Cherry ·· 125 Natural Maple ·· 119 Pumice F ···· 116 Sandstone · 613 Silver 3 · 117 Soft Grey E/M42 ····· 813 Trim grey 5 ·· 127 Walnut ·· Frosty white W · Light grey (integral) U Glider grey (integral) G1 638 Blond Maple 4/M · 639 Light Cherry 6/R · 006 Maple K Default trim information: Trim Grey is the integral color for caster and glide leg levellers and screen corners Black: flat bracket, cable tray and casters Screen available in Ribbed Polycarbonate or Marker surface

Veneer finishes for Plannable Upstart worksurfaces are available through Custom Product Development. For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified. Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.

Wood Finishes New codes begin with a three digit numeric sequence, followed by a letter suffix. Each letter suffix (A-F) represents a different combination of pore fill options and gloss levels.

Gloss Level Fill Level Edge Options for Veneers A Low Gloss Closed Pore WOOD Complemetary B MediumGloss Closed Pore SYN Wood Complementary Synthetic C High Gloss Closed Pore WPLY Wood Ply Edge * SPLY Synthetic Ply Edge * D Low Gloss Open Pore E Medium Gloss Open Pore * Ply Edge available on Birch (037) worksurfaces. F High Gloss Open Pore

11 Upstart Legacy Finishes Upstart Limited Availability

Specify Legacy Finishes for existing customers only. Legacy Finishes are not available for new customers.

Table legs, screen brackets, magnet rail Worksurfaces Worksurface edges B Snow · L Light grey ·· E Fiber · V Winter grey · S Slate · F Pumice ·· U Folkstone grey ·· M42 Soft grey ·· D Sand ·· CM Clear Maple · PA Pearwood · WM Warm Cherry · 5 Trim grey · N Black · W Frosty white · N2 Flint NU Light grey NJ Medium grey NV Dark grey NW Light Tan NH Beige 3 Silver · B White · 2 Metallic flint · U Light metallic grey · J Medium metallic grey · V Dark metallic grey · H Metallic beige · W Light metallic tan · E Soft grey · K Maple U Light grey (integral) G1 Glider grey (integral) Default trim information: Trim Grey is the integral color for caster and glide leg levellers and screen corners Black: flat bracket, cable tray and casters Screen available in Ribbed Polycarbonate or Marker surface For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified. Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.

NOTE: Add 10% to the list price of any laminate product when specifying a legacy laminate.

12 Service Wall frames Currents

description type w d h pattern no. black Wall frame, standard crown 39ЉH 48Љ 5Љ 43Љ APF1 3948 $751. 60Љ 5Љ 43Љ APF1 3960 862. 72Љ 5Љ 43Љ APF1 3972 1,067. Service Walls and components

48ЉH 48Љ 5Љ 52Љ APF1 4848 825. 60Љ 5Љ 52Љ APF1 4860 946. 72Љ 5Љ 52Љ APF1 4872 1,179.

64ЉH 48Љ 5Љ 68Љ APF1 6448 981. 60Љ 5Љ 68Љ APF1 6460 1,123. 72Љ 5Љ 68Љ APF1 6472 1,405.

Wall frame, compact crown 39ЉH 48Љ 5Љ 40Љ APFA1 3948 602. 60Љ 5Љ 40Љ APFA1 3960 690. 72Љ 5Љ 40Љ APFA1 3972 851.

48ЉH 48Љ 5Љ 49Љ APFA1 4848 658. 60Љ 5Љ 49Љ APFA1 4860 754. 72Љ 5Љ 49Љ APFA1 4872 941.

64ЉH 48Љ 5Љ 65Љ APFA1 6448 784. 60Љ 5Љ 65Љ APFA1 6460 898. 72Љ 5Љ 65Љ APFA1 6472 1,123.

Order Code Specification Information Application Notes

Example: APF1 4860 Wall frame pattern numbers begin Service Wall frames are the Crown is bored to accept stackable APF1 Wall frame with APF prefix. structural component of a Currents add-up panels at 3Љ increments. spine. Specify frames in any 48 Height Specify: combination of widths to create the Wall frames include two levelling 60 Width Fifth position: height overall wall length required. feet with 2Љ travel, 12Љ from each 39 39ЉH side edge. Frames include vertical studs every 48 48ЉH The base of the wall accepts Knoll 2 64 64ЉH 12Љ on center, with cover mounting clips and cable manager inserts on + 2 or 3 + 3 raceway power rails, and allows cables to enter or exit Seventh position: width both sides. Frames also include 4ЉH or 1Љ top crown with continuous anywhere between glides. 48 48ЉW channel for add-up panels. 4ЉH Specify crown covers, raceway 60 60ЉW Standard crown frames include 72 72ЉW covers, structural base covers, and shaped crowns for upmounting wall covers for each face of frame, shelves and overhead storage All wall frames include two 3Љ and specify power components cabinets or canopy lighting at any separately. diameter, 2Љ levelling glides and one point. Compact crown frames set of connectors to adjacent frame feature a slim profile crown with or wall connector. Frames are black downmounting capability only. painted finish.

13 Fence frames Currents

description width depth height pattern number black

Fence frames (legs not included) 48Љ 5Љ 20 1/2Љ APF 1848 $686. 60Љ 5Љ 20 1/2Љ APF 1860 823. 72Љ 5Љ 20 1/2Љ APF 1872 987.

Leg with glide 2 3/4Љ 4Љ 18 1/2Љ AX1LEG ( ) 105. 2 3/4Љ 4Љ 5Љ AX1LEG5 ( ) 105. 2 3/4Љ 4Љ 6Љ AX1LEG6 ( ) 105.

Stabilizer feet (set of 2) 2 1/2Љ 7 1/2Љ 4 1/2Љ AX1 FF ( ) 164.

Order Code Specification Information Application Notes

Example: APF 1872 Specify painted finishes for legs and Currents Fence provides Legs with feet 12Љ from each end of APF Wall frame feet. independent services distribution to connected Fence frames can be a cluster of tables, desks or replaced by stabilizer end cabinets 18 Height Fence frames include four barrel workstations. or T-ends with panels. Intermediate 72 Width connectors, crown and bottom rail support may also be provided by covers in trim grey. Frames must be Fence legs may be specified at three legs without feet in combination enclosed with two rows of 9ЉH heights to deliver an overall height with perpendicular panels. Currents or AutoStrada wall covers of 40ЉH, 28ЉH or 27ЉH to the top of on each face. the crown. Specify AX1LEG( ) leg to Fence frames can end support get to 40ЉH; specify AX1LEG6( ) worksurfaces but cannot cantilever Specify Currents power components leg to get to 28ЉH; and specify worksurfaces or upmounted storage. separately. Outlet modules mount at AX1LEG5( ) leg to get to 27ЉH to any point along the top row only. the top of the crown. When specifying frameless glass add-up panels on Fence, each Cable tray access covers mount in Installed Fence frames include Fence frame requires two legs. bottom row only. vertical studs with cover mounting clips and cable manager inserts Fence T-end adaptors, stabilizer end every 12Љ. cabinet adaptors, high-low straight connectors and unversal panel A continuous top channel accepts starters are only compatible with Currents or AutoStrada crown top Fence frames that are specified at caps and supports frameless glass 40 inch high with the 18- 1/2Љ high add up panels, add up panels or leg (AX1 LEG). To use these stackable add up panels 12Љ high. components when Fence is planned 21ЉH stackable add up panels may with shorter legs that deliver overall be used on Fence runs supported by heights of 27 or 28 inches high, perpendicular panels. please contact Knoll Custom Product Development for assistance. Fence legs with glides mount 12Љ from each frame side edge under the first full vertical stud. Stabilizer feet mount on both faces of Fence legs. For freestanding Fence runs, specify a leg with feet 12Љ from each run end plus a leg with feet for each intermediate frame connection. Intermediate legs may be positioned on either side of the frame connection. 14 Crown and raceway covers Currents

description type w d h pattern no. paint metal finish (A) list Crown covers (pair) 48Љ 5Љ 4Љ APT 48 ( ) $52. $62. 60Љ 5Љ 4Љ APT 60 ( ) 62. 69. 72Љ 5Љ 4Љ APT 72 ( ) 69. 89. Service Walls and components

Crown covers, compact (pair) 48Љ 5Љ 1Љ APTA 48 ( ) 85. integral color 60Љ 5Љ 1Љ APTA 60 ( ) 99. 72Љ 5Љ 1Љ APTA 72 ( ) 170.

Raceway covers (pair) no outlets 48Љ – 3 1/3Љ APR 480 ( ) 52. 60Љ – 3 1/3Љ APR 600 ( ) 62. 72Љ – 3 1/3Љ APR 720 ( ) 69.

outlets 48Љ – 3 1/3Љ APR 48 ( )( ) 62. 60Љ – 3 1/3Љ APR 60 ( )( ) 69. 72Љ – 3 1/3Љ APR 72 ( )( ) 89.

Crown top cap 24Љ 2Љ – APT C24 ( ) 11. 24Љ 2Љ – APT1 C24 ( ) 11. 36Љ 2Љ – APT C36 ( ) 22. 36Љ 2Љ – APT1 C36 ( ) 22. 48Љ 2Љ – APT C48 ( ) 40. 48Љ 2Љ – APT1 C48 ( ) 40. 60Љ 2Љ – APT C60 ( ) 44. 60Љ 2Љ – APT1 C60 ( ) 44. 72Љ 2Љ – APT C72 ( ) 52. 72Љ 2Љ – APT1 C72 ( ) 52. integral color only, plastic

Order Code Specification Information Application Notes

Example: APR 480 612 Wall crown pattern numbers begin Specify trim grey or easy grey Crown, raceway, and structural base APR Raceway with APT-prefix, then frame width. integral color for compact crown covers are required for every wall covers and crown top cap. frame in corresponding widths. 48 Width Specify: Covers are specified in pairs to Sixth position: paint or metal finish 0 Outlet openings Crown top caps are optional fillers cover both sides of a frame. 612 Finish Raceway Covers begin with APR- for the crown where no add-up Raceway covers may be specified prefix, then frame width. panels are planned. with no openings (desk-height raceway), two openings in the Specify: Crown top caps with prefix APT1 Sixth position: outlet openings center, or four outlets at all possible are slightly taller than crown top locations in 48Љ or 60ЉW raceway. 0 no outlets caps with prefix APT to better line 72ЉW raceway may have four outlet 2 two outlets, each side (48Љ, up with frameless glass add-up openings in the center or six in all, 60Љ only) panels. each side. 4 four outlets, each side 6 six outlets (72Љonly), each Raceway cover sets with outlet side openings include black filler plates for one cover only. Seventh position: Raceway cover finish 15 Structural base cover kits Currents non-upholstered

smooth textured textured description type w d h pattern no. solid solid perforated perforated Structural base covers (pair) non upholstered 48Љ 1Љ 16Љ APC AZ48 ( )( ) $356. $395. $506. $555. 60Љ 1Љ 16Љ APC AZ60 ( )( ) 409. 455. 578. 641. 72Љ 1Љ 16Љ APC AZ72 ( )( ) 465. 514. 654. 719.

Order Code Specification Information Application Notes

Example: APC AZ48 H 612 Structural base cover kit pattern Specify paint finish for all covers. Crown, raceway, and structural base APC Wall cover numbers begin with APC AZ prefix, covers are required for every wall then cover width. Textured paint finishes for structural frame in corresponding widths. AZ Attachment zone base covers only. Covers are specified in pairs to 48 Width Specify: cover both sides of a frame. Eighth position: H Perforated P painted Structural base covers bolt to each 612 Finish PT textured painted side of the wall frame up to 21ЉH for H perforated painted structure and continuous HT textured perforated painted attachment capability. Ninth position: paint finish or fabric group 16 Structural base cover kits Currents upholstered

description type w d h pattern no. 10 15 20 30 35 40 45 50 55 Structural base covers (pair) upholstered 48Љ 1Љ 16Љ APC AZ48 F ( ) $512. $533. $550. $588. $604. $626. $644. $676. $717. 60Љ 1Љ 16Љ APC AZ60 F ( ) 604. 626. 646. 690. 715. 731. 757. 794. 845. 72Љ 1Љ 16Љ APC AZ72 F ( ) n/a 717. n/a n/a n/a n/a n/a n/a n/a Service Walls and components

Order Code Specification Information Application Notes

Example: APC AZ48 F 10 Structural base cover kit pattern Crown, raceway, and structural base APC Wall cover numbers begin with APC AZ prefix, covers are required for every wall then cover width. frame in corresponding widths. AZ Attachment zone Covers are specified in pairs to 48 Width Specify: cover both sides of a frame. Eighth position: F Upholstered F fabric Structural base covers bolt to each 10 Fabric side of the wall frame up to 21ЉH for Ninth position: paint finish or fabric structure and continuous group attachment capability. When ordering 60Љ wide or greater Fabric groups: width upholstered structural base Specify two-digit fabric group covers, please check the width of number the fabric selected.

17 Access covers Currents outlets cover

description type w d h pattern no. black no finish smooth Outlets cover 9ЉH cover 12Љ 1Љ 9Љ APC OC ( ) $44.

Hinged outlet flap (each) APC OCF 44.

Outlet fillers (Set of 10) AR OF 50.

Hardwire outlets cover 12Љ 9Љ APC HOC ( ) 67.

Hardwire outlet box, desk height quad 2Љ AR1 HOB 306. two quad 12Љ AR1 HOB2 403.

Order Code Specification Information Application Notes

Example: APC OC 612 Specify finish. Locate outlets covers on Service Hardwire outlet box accepts two APC Service wall cover Wall or Fence frames before Decora-style duplex outlets, and specifying other wall covers. includes mounting brackets for one OC Outlets cover face of Service Wall between 21Љ 612 Finish Outlets cover mounts between 21Љ and 48ЉH or one face of top row of and 30Љ (below standard desk Fence frames. Two quad hardwire height), 30Љ - 39Љ (above desk outlet box accepts four duplex height) or 39Љ - 48Љ on Service Wall outlets on one face. Also specify frame. Outlet cover mounts in top hardwire outlets cover, which has row of Fence only. four outlet openings. Specify outlet Outlets cover is 12Љ wide, and fillers for any unused outlet mounts anywhere on Service Wall openings. frame between 21Љ and 48Љ above Outlet boxes include openings to the floor. Outlets cover corresponds permit continuous lay-in wiring with to power components (specified Wiremold௡ raceway. Electrical separately) mounted on Service Wall contractor supplies infeed cable, frame. Wiremold 2400௡, and duplex Outlets covers have four openings outlets. Outlet boxes can be planned for power or PDC outlets. Specify back to back, with distribution on outlet fillers for unused outlet one side of Service Wall. openings in cover. Specify hinged NOTE: Currents cable tray access outlet flap to conceal power or data covers and all AutoStrada access outlet plugs. Each flap covers two covers cannot be used in the same openings; two flaps conceal all four 9ЉH zone as the wiremold raceway openings in outlets cover. as the wiremold will not fit behind For hardwire power applications the covers. (required in City of Chicago) specify hardwire outlets cover and hardwire outlets box. Do not specify cable tray covers at same level as hardwire power. 18 Access covers Currents cable tray and slat wall covers

description w d h pattern no. smooth 9ЉH cable tray covers 12Љ 1Љ 9Љ APC 0912 C ( ) $103. 24Љ 1Љ 9Љ APC 0924 C ( ) 122. 36Љ 1Љ 9Љ APC 0936 C ( ) 144. 48Љ 1Љ 9Љ APC 0948 C ( ) 187. Service Walls and components 60Љ 1Љ 9Љ APC 0960 C ( ) 239. 72Љ 1Љ 9Љ APC 0972 C ( ) 293.

9ЉH cable tray exit cover 12Љ 1Љ 9Љ APC 0912 CX ( ) 207.

9ЉH slat wall covers 12Љ 1Љ 9Љ APC 0912 S ( ) 94. 24Љ 1Љ 9Љ APC 0924 S ( ) 107. 36Љ 1Љ 9Љ APC 0936 S ( ) 124. 48Љ 1Љ 9Љ APC 0948 S ( ) 165. 60Љ 1Љ 9Љ APC 0960 S ( ) 207. 72Љ 1Љ 9Љ APC 0972 S ( ) 251.

Order Code Specification Information Application Notes

Example: APC 0948 C 612 Specify finish. Cable tray and slat wall covers Cable tray exit cover permits power APC Service wall cover provide integral performance jumpers and data/communication surface on one or both sides of a cables to pass from wall to Currents 09 Height Service Wall or Fence frame. Cable desk service beam. Cable tray exit 48 Width tray and slat wall may be planned in cover, 12ЉW only, has two openings C Surface type combination with other painted or with sliding covers. upholstered covers to enclose 612 Finish frames between 21ЉH and 48ЉH. Slat wall supports KnollExtra task lights, monitor arms, paper trays, Cable tray mounts from 21Љ - 30Љ file holders and other accessories. only on any Service Wall frame. Adjacent trays form continuous, Slat wall covers will support flat easily accessible cable management panel monitor arms with varying at worksurface or table height. weight limitations based on Shorter segments provide local mounting and application. Please cable management below outlet refer to the KnollExtra price list for modules. Covers may span across a comprehensive mounting and straight wall frame connection. weight limitation information by application. Bottom half of cable tray cover permits cables to be managed on surface of studs with one cable holder (55 CAT5 cables) or two clips (28 cables). 19 Access covers Currents marker surface and painted steel covers

description type w d h pattern no. M smooth textured 9ЉH Marker surface covers 24Љ 1 9Љ APC 0924 M $60. 36Љ 1 9Љ APC 0936 M 71. 48Љ 1 9Љ APC 0948 M 85. 60Љ 1 9Љ APC 0960 M 95. 72Љ 1 9Љ APC 0972 M 102.

16ЉH Marker surface covers 48Љ 1 16Љ APC 1648 M 120. 60Љ 1 16Љ APC 1660 M 144. 72Љ 1 16Љ APC 1672 M 165.

9ЉH Painted steel covers smooth 12Љ 1Љ 9Љ APC 0912 P ( ) 48. 24Љ 1Љ 9Љ APC 0924 P ( ) 56. 36Љ 1Љ 9Љ APC 0936 P ( ) 61. 48Љ 1Љ 9Љ APC 0948 P ( ) 79. 60Љ 1Љ 9Љ APC 0960 P ( ) 87. 72Љ 1Љ 9Љ APC 0972 P ( ) 97.

textured 12Љ 1Љ 9Љ APC 0912 PT ( ) 50. 24Љ 1Љ 9Љ APC 0924 PT ( ) 60. 36Љ 1Љ 9Љ APC 0936 PT ( ) 71. 48Љ 1Љ 9Љ APC 0948 PT ( ) 85. 60Љ 1Љ 9Љ APC 0960 PT ( ) 95. 72Љ 1Љ 9Љ APC 0972 PT ( ) 102.

Order Code Specification Information Application Notes

Example: APC 0948 P 117 9ЉH covers plan at any 9ЉH level in Marker surface covers are steel with APC Service wall cover 39Љ, 48Љ, or 64Љ Service Walls or a bright white dry-erase marker Fence Frames. finish. 09 Height 48 Width For active face of 39ЉH Service Wall Painted steel covers provide a frame, specify two 9ЉH covers each durable wall-like surface in smooth P Surface type side. or textured finish. 117 Finish For active face of 48ЉH Service Wall Service Wall covers enclose frames frame, specify three 9ЉH covers between 21ЉH and the top crown. each side. Covers may be specified in any combination of widths For active face of 64ЉH Service Wall corresponding to the total Service frame, specify three 9ЉH covers and Wall length. Covers may span across one 16ЉH cover each side. a straight wall frame connection. For active face of Fence frames, For active surfaces with access specify two 9Љ covers each side. to cables and Surface type: power/data/communications outlets, specify 9Љ and 16ЉH segmented P Painted covers as described in Specification PT Textured painted Information. Normally, 9Љ cover M Marker from 21Љ to 30Љ above floor is cable tray or painted steel, and higher Specify smooth or textured painted covers are painted, marker, finish for steel covers. upholstered, tackable, or slat wall surfaces. 20 Access covers Currents marker surface and painted steel covers

description type w d h pattern no. M smooth textured 16ЉH Painted steel covers smooth 48Љ 1Љ 16Љ APC 1648 P ( ) $111. 60Љ 1Љ 16Љ APC 1660 P ( ) 134. 72Љ 1Љ 16Љ APC 1672 P ( ) 149. Service Walls and components

textured 48Љ 1Љ 16Љ APC 1648 PT ( ) 120. 60Љ 1Љ 16Љ APC 1660 PT ( ) 144. 72Љ 1Љ 16Љ APC 1672 PT ( ) 165.

Order Code Specification Information Application Notes

description w d h pattern no. 10 15 20 30 40 45 50 55 9ЉH Wall covers 12Љ 1Љ 9Љ APC 0912 F ( ) $93. $93. $97. $100. $102. $103. $107. $114. 24Љ 1Љ 9Љ APC 0924 F ( ) 112. 114. 118. 122. 130. 135. 143. 150. 36Љ 1Љ 9Љ APC 0936 F ( ) 135. 141. 143. 151. 164. 168. 175. 188. 48Љ 1Љ 9Љ APC 0948 F ( ) 149. 151. 160. 175. 186. 190. 201. 212. 60Љ 1Љ 9Љ APC 0960 F ( ) 176. 186. 191. 209. 221. 236. 246. 255. 72Љ 1Љ 9Љ APC 0972 F ( ) n/a 211. n/a n/a n/a n/a n/a n/a

16ЉH Wall covers 36Љ 1Љ 16Љ APC 1636 F ( ) 201. 209. 213. 230. 246. 251. 260. 276. 48Љ 1Љ 16Љ APC 1648 F ( ) 217. 236. 245. 260. 276. 291. 301. 317. 60Љ 1Љ 16Љ APC 1660 F ( ) 264. 276. 294. 311. 333. 345. 363. 390. 72Љ 1Љ 16Љ APC 1672 F ( ) n/a 312. n/a n/a n/a n/a n/a n/a

Order Code Specification Information Application Notes

Example: APC 0948 F15 For active face of 39ЉH Service Wall Upholstered Service Wall covers APC Service wall cover frame, specify two 9ЉH covers. enclose frame between 21Љ and the top crown. 09 Height For active face of 48ЉH Service Wall 48 Width frame, specify three 9ЉH covers. Specify widths corresponding to wall frame width, or in any 12Љ F Surface type For active face of 64ЉH Service Wall increment to accommodate 12ЉW 15 Fabric group frame, specify three 9ЉH covers and outlets covers or slat wall covers. one 16ЉH cover. Covers may span across a straight For full fabric surface between 5Љ wall frame connection. and 21Љ, order upholstered For active surfaces with access to structural base cover. cables and For active face of Fence frames, power/data/communications outlets, specify two 9Љ covers each side. specify 9Љ and 16ЉH segmented covers as described in Specification Surface type: Information. Normally, 9Љ cover F Upholstered from 21Љ to 30Љ above floor is cable tray or painted steel, and higher Specify fabric group: covers are painted, marker, upholstered, tackable, or slat wall 10 Fabric group 10 surfaces. 15 Fabric group 15 20 Fabric group 20 When ordering 60Љ or wider covers, 30 Fabric group 30 please check width of fabric 40 Fabric group 40 specified. 50 Fabric group 50 55 Fabric group 55

22 Access covers Currents tackable upholstered

description w d h pattern no. 10 15 20 30 40 45 50 55 9ЉH Wall covers 12Љ 1Љ 9Љ APC 0912 A ( ) $176. $184. $187. $199. $212. $215. $223. $245. 24Љ 1Љ 9Љ APC 0924 A ( ) 176. 184. 187. 199. 212. 215. 223. 245. 36Љ 1Љ 9Љ APC 0936 A ( ) 176. 184. 187. 199. 212. 215. 223. 245. 48Љ 1Љ 9Љ APC 0948 A ( ) 190. 202. 209. 221. 240. 248. 261. 277. Service Walls and components 60Љ 1Љ 9Љ APC 0960 A ( ) 227. 240. 251. 267. 294. 301. 314. 337. 72Љ 1Љ 9Љ APC 0972 A ( ) n/a 271. n/a n/a n/a n/a n/a n/a

16ЉH Wall covers 36Љ 1Љ 16Љ APC 1636 A ( ) 261. 267. 279. 298. 313. 322. 341. 361. 48Љ 1Љ 16Љ APC 1648 A ( ) 293. 301. 312. 337. 361. 369. 394. 412. 60Љ 1Љ 16Љ APC 1660 A ( ) 345. 361. 376. 405. 436. 453. 468. 508. 72Љ 1Љ 16Љ APC 1672 A ( ) n/a 407. n/a n/a n/a n/a n/a n/a

18ЉH Wall cover (replaces (2) 9ЉH) 36Љ 1Љ 18Љ APC 1836 A ( ) 311. 320. 330. 350. 367. 383. 400. 420. 48Љ 1Љ 18Љ APC 1848 A ( ) 393. 400. 411. 436. 457. 468. 492. 517. 60Љ 1Љ 18Љ APC 1860 A ( ) 464. 481. 496. 520. 552. 563. 579. 611. 72Љ 1Љ 18Љ APC 1872 A ( ) n/a 542. n/a n/a n/a n/a n/a n/a

Order Code Specification Information Application Notes

Example: APC 0948 A20 For active face of 39ЉH Service Wall Tackable upholstered Service Wall For passive Service Wall surfaces APC Service wall cover frame, specify two 9ЉH covers. For covers enclose wall frames between (corridors or conference areas) passive face (along corridor or wall) 21Љ and the top crown. Covers specify 18ЉH or 27ЉH covers in 09 Height specify one 18Љ cover. incorporate a tackable, acoustical place of two or three 9ЉH covers. 48 Width core in the same outward profile as For active face of 48ЉH Service Wall other upholstered covers. 18ЉH covers may also be specified A Surface type frame, specify three 9ЉH covers or above 9ЉH covers including outlets 20 Fabric group one 9ЉH and one 18ЉH cover. For Specify widths corresponding to covers below desk height on 48Љ or passive face, specify 27ЉH cover. wall frame width, or in any 12Љ 64ЉH Service Walls. increment to accommodate 12ЉW For active face of 64ЉH Service Wall outlets covers or slat wall covers. Service Wall with upholstered frame, specify three 9ЉH covers and Covers may span across a straight tackable covers has been tested to one 16ЉH cover or one 9ЉH, one wall frame connection. NRC .40 and STC 22. 18ЉH, and one 16ЉH cover. For passive face, specify one 27Љ and For active surfaces with access to When ordering 60Љ or wider covers, one 16ЉH cover. cables and please check width of fabric power/data/communications outlets, specified. For full fabric surface between 5Љ specify 9Љ and 16ЉH segmented and 21Љ, order upholstered covers as described in Specification structural base cover. Information. Normally, 9Љ cover For active face of Fence frames, from 21Љ to 30Љ above floor is cable specify two 9Љ covers each side. For tray or painted steel, and higher passive face, specify one 18Љ cover. covers are painted, marker, upholstered, tackable, or slat wall Surface type: surfaces. A tackable upholstered Specify fabric group: 10 Fabric group 10 15 Fabric group 15 20 Fabric group 20 30 Fabric group 30 40 Fabric group 40 50 Fabric group 50 55 Fabric group 55

23 Access covers Currents tackable upholstered

description w d h pattern no. 10 15 20 30 40 45 50 55 27ЉH Wall cover (replaces (3) 9ЉH) 36Љ 1Љ 27 APC 2736 A ( ) $464. $481. $496. $520. $552. $563. $579. $611. 48Љ 1Љ 27Љ APC 2748 A ( ) 582. 603. 614. 649. 677. 698. 720. 752. 60Љ 1Љ 27Љ APC 2760 A ( ) 706. 720. 728. 775. 810. 828. 851. 880. 72Љ 1Љ 27Љ APC 2772 A ( ) n/a 820. n/a n/a n/a n/a n/a n/a

Order Code Specification Information Application Notes

24 Wall ends and connectors Currents 90° and 120° spine connectors

description w d h pattern no. paint L connector, 90° 6Љ 6Љ 39Љ AX1 L39 ( )( ) $532. 6Љ 6Љ 48Љ AX1 L48 ( )( ) 640. 6Љ 6Љ 64Љ AX1 L64 ( )( ) 748. Service Walls and components

T connector, 90° 6Љ 7Љ 39Љ AX1 T39 ( )( ) 532. 6Љ 7Љ 48Љ AX1 T48 ( )( ) 640. 6Љ 7Љ 64Љ AX1 T64 ( )( ) 748.

X connector, 90° 7Љ 7Љ 39Љ AX1 X39 ( )( ) 532. 7Љ 7Љ 48Љ AX1 X48 ( )( ) 579. 7Љ 7Љ 64Љ AX1 X64 ( )( ) 640.

V connector, 120° 5 1/2Љ 5 1/2Љ 39Љ AX1 V39 ( )( ) 532. 5 1/2Љ 5 1/2Љ 48Љ AX1 V48 ( )( ) 640. 5 1/2Љ 5 1/2Љ 64Љ AX1 V64 ( )( ) 748.

Y connector, 120° 6 1/2Љ 5 1/2Љ 39Љ AX1 Y39 ( )( ) 532. 6 1/2Љ 5 1/2Љ 48Љ AX1 Y48 ( )( ) 640. 6 1/2Љ 5 1/2Љ 64Љ AX1 Y64 ( )( ) 748.

Order Code Specification Information Application Notes

Example: AX1 L39 612 612 For L, T, V, Y connectors specify: Specify painted finishes for connector L, T, and X connectors join Currents AX1 Currents connector trim covers and crown end caps. Service Wall frames at 90° angles Seventh position: and include vertical trim covers, top L Type painted finish for vertical trim cover When ordering connectors for the cap and standard crown end caps, 39 Height and raceway cover Service Wall with 1ЉH compact and one spare set of straight crown, specify compact crown end connectors. 612 Trim/raceway cover Eighth position, and X connectors: caps separately. finish painted finish for top cap and crown V and Y connectors join Currents 612 Top/end cap finish end caps Service Wall frames at 120° angles and include vertical trim covers, top cap and standard crown end cap. 25 Wall ends and connectors Currents other ends and connectors

description type w d h pattern no. paint list price Outrigger deep 3Љ 15Љ 21Љ AA1ORD( ) $252. standard 3Љ 8Љ 21Љ AA1OR( ) 184.

High low straight connector 48 - 39Љ – 5Љ 48Љ AX1 HLS4839 ( )( ) 291. 64 - 39Љ – 5Љ 64Љ AX1 HLS6439 ( )( ) 492. 64 - 48Љ – 5Љ 64Љ AX1 HLS6448 ( )( ) 330.

Service Wall starter 39Љ 1Љ 2Љ 39Љ AX1 SWS39 ( ) 164. 48Љ 1Љ 2Љ 48Љ AX1 SWS48 ( ) 184. 64Љ 1Љ 2Љ 64Љ AX1 SWS64 ( ) 211.

Straight connector kit (replacement) – – – AX1 S 35.

Order Code Specification Information Application Notes

Example: AX1 HLS4839 612 612 Specify painted finishes for outrigger, Outrigger connects to structural High-low straight connectors join AX1 Currents connector high low straight connector and base cover at any point. Outriggers Service Wall of different heights in a Service Wall starter. (or perpendicular systems panels) straight line. HLS Type are required every 8Ј and adjacent 4839 Height to flat end for adequate support. Service Wall starter connects Service Wall to building wall. 612 Vertical cover finish Specify deep outriggers when cantilevering 24ЉD worksurfaces 612 Crown end finish Straight connector is replacement without adjacent perpendicular hardware kit to join Currents Wall systems panels or Service Wall frames of the same height end to connectors. end. Kit includes four barrel-shape Standard outrigger should be connectors and hardware. specified when desks with service beam are positioned along Service Wall.

26 Wall ends and connectors Currents flat ends and crown end caps

description type d h pattern no. paint list price Flat end 5Љ 39Љ AX1 F39 ( )( ) $169. 5Љ 48Љ AX1 F48 ( )( ) 190. 5Љ 64Љ AX1 F64 ( )( ) 214. Service Walls and components

Crown end cap APT ( ) 5.

Crown end cap compact Kit of 1 APTA CC1 ( ) 18. Kit of 10 APTA CC ( ) 171.

Order Code Specification Information Application Notes

Example: AX1 F48 For flat ends specify: Flat end finishes end of AX1 Currents connector corresponding height Service Wall Seventh position: when end of Service Wall is F Flat End painted finish for outside trim cover supported by outriggers. 48 Height and raceway cover 612 Vertical cover finish Eighth position: 612 Crown end finish painted finish for crown end cap When specifying a flat end for a Service Wall frame with the 1 inch compact crown, compact crown end caps must be ordered separately. Specify painted finish for standard crown end cap. Specify trim grey or easy grey integral color for compact crown end cap. 27 Wall ends and connectors Currents Fence ends and connectors connectors description w d h pattern no. list price L connector, 90 degrees 6Љ 6Љ 19Љ AX1 L18 ( ) $534.

T connector, 90 degrees 6Љ 7Љ 19Љ AX1 T18 ( ) 545.

X connector, 90 degrees 7Љ 7Љ 19Љ AX1 X18 468.

V connector, 120 degrees 5 1/2Љ 5 1/2Љ 19Љ AX1 V18 ( ) 512.

Y connector, 120 degrees 6 1/2Љ 5 1/2Љ 19Љ AX1 Y18 ( ) 235.

Order Code Specification Notes Application Notes

Example: AX1 L 18 613 Specify painted finishes for connector L, T and X connectors join Fence Flat end finishes end of Fence AX1 Fence connector trim covers. frames at 90° angles and include frames and includes crown end vertical trim covers, top cap and detail. L Type For L, T, V and Y connectors crown end caps and one set of 18 Height specify finish for vertical trim. straight connectors. Specify AX1 F18 ( ) for use with sloped crown covers. Specify AX1A 613 Trim finish All top caps and crown covers are Y and V connectors join Fence F18L ( ) for use with AutoStrada trim grey. Specify finish for outside frames at 120° angles. flat, low profile crown covers. trim of flat end. Specify AX1A F18H ( ) for use with AutoStrada flat, high profile crown covers.

28 Wall ends and connectors Currents Fence ends and connectors connectors description w d h pattern no. list price Flat end for use with – 5Љ 21Љ AX1 F18 ( ) $205. sloped crown covers Service Walls and components

Flat end for use with – 5Љ 21Љ AX1A F18H ( ) 205. flat crown covers – 5Љ 21Љ AX1A F18L ( ) 205.

Order Code Specification Notes Application Notes

29 Wall ends and connectors Currents Fence ends and connectors other hardware description type w d h pattern no. list price

T-end adapter 0Љ or 1 1/8Љ extension 1 5/8Љ 2 1/8Љ 2 3/8Љ AX1 AK1 ( ) $35.

T-end and stabilizer end cabinet adapter 3 1/2Љ extension 4Љ 5Љ 16 1/2Љ AX1 AK3 ( ) 122.

Flat wall starter 48ЉH service wall 3 1/4Љ 27Љ AX1 FWS 48 105. 64ЉH service wall 3 1/4Љ 43Љ AX1 FWS 64 115. Fence and 39ЉH wall 3 1/4Љ 18Љ AX1 FWS 39 97.

High-low straight connector 48ЉH wall - Fence AX1 FHLS4818 ( ) 604.

Order Code Specification Information Application Notes

Example: AX1 FWS 39 Specify painted finishes for T-end Standard 39ЉH fence accepts High-low Fence connector joins AX1 Fence end adapter kits. Currents T-ends for 39Љ Service standard 39ЉH Fence and 48ЉH Wall. Currents Service Wall. FWS Type Flat wall starter is black only. 39 Height Specify AX1 AK1 adapter kit to Fence T-ends adaptors, stabilizer Crown end covers are trim grey. complete bottom trim and crown end end cabinet adaptors, high-low of T-ends with 0Љ or 1 1/8Љ extension. straight connectors and universal panel starters are only compatible Specify AX1 AK3 adapter kit to with Fence frames that are specified complete bottom trim and crown end at 40 inches high with the 18- 1/2Љ of T-ends with 3Љ extension. high leg (AX1 LEG). To use these Flat wall starter connects Fence components when Fence is planned frames and Service Wall to building with shorter legs that deliver overall wall. heights of 27 or 28 inches high, please contact Knoll Custom Product Development for assistance. 30 Wall frame accessories Currents Wall frame

description type w d h pattern no. list price Acoustical inserts 39ЉH 12Љ 2Љ 34Љ APA 39 $44. 48ЉH 12Љ 2Љ 43Љ APA 48 51. 64ЉH 12Љ 2Љ 59Љ APA 64 68. Service Walls and components

Order Code Specification Information Application Notes

Example: APT 612 Acoustical inserts fit between studs APT Service wall trim in Service Wall frame to increase control of sound transmission. 612 Painted finish Inserts are bagged in heights corresponding to wall frame. Specify four inserts for 48ЉW Service Wall frame, five for 60ЉW Service Wall frame, and six for 72ЉW Service Wall frame. Service Walls with acoustical inserts have been tested to STC 33. 31 Wall frame accessories Currents Fence frame

description type w d h pattern no. list price

Wire manager cover (set of 2) 3 1/2Љ 3Љ 18 3/8Љ AR1VCM $90. 3 1/2Љ 3Љ 5Љ AR1VCM5 90. 3 1/2Љ 3Љ 6Љ AR1VCM6 90.

Carpet grips (set of 10) AA1CG 18.

Non-skid pads (set of 10) AA1NSK 50.

Hardwire fence infeed (NYC) 2 + 2 AR1 EPHF 716. 3 + 3 AR1 TPHF 761.

Fence to desk brackets 27Љh Fence AA1FDB27( ) 103. 28Љh Fence AA1FDB28( ) 103.

Fence end bracket kit AB1FAE ( ) 279.

Order Code Specification Information Application Notes

Example AR1 VCM Wire manager covers are integral Wire manager covers snap into the Fence to desk brackets are only AR1 Raceway color trim grey. sides of the Fence legs to guide compatible with Fence frames cables from the floor to the specified with shorter Fence legs VCM Type underside of the frame. (AX1LEG5, AX1LEG6) where the total height of Fence is 27Љ or 28Љ to Carpet grips and/or non-skid pads the top of the crown. snap onto bottom of stabilizer feet to prevent legs from sliding. Fence to desk brackets may not be specified as a means of end Hardwire fence infeed is approved supporting worksurfaces. Fence to for City of New York installation. desk brackets may only be specified Infeed includes wire manager cover, for use with freestanding tables. junction box and connector to desk height outlet module. Fence end brackets attach to the Currents Fence to support one end Fence to desk brackets connect of rectilinear or one back edge of a Fence frames to freestanding tables corner worksurface when the other to stabilize Fence. Fence to desk ends are properly supported by legs, brackets are specified as an storage or panel brackets. Refer to alternative to stabilizer feet as a the specific worksurface means of stabilizing freestanding Application Notes for support Fence runs. requirements. Fence end brackets support the underside of the worksurface in 1Љ increments from 26Љ to 28Љ (27Љ to 29Љ top height). 32 Spine ends and connectors Currents Spine end connectors for Dividends Horizon panels and screens

description application h w d pattern no. list

Spine end connector 36Љh panel/39Љh spine 39Љ 5Љ 1/2Љ AX1SED3939 ( )( )( )( ) $337. 36Љh-42Љh panel/ 48Љh spine 48Љ 5Љ 1/2Љ AX1SED4848 ( )( )( )( ) 352. 36Љh-64Љh panel/ 64Љh spine 64Љ 5Љ 1/2Љ AX1SED6464 ( )( )( )( ) 420. Service Walls and components 42Љh panel/ 39Љh spine + 1Љ crown 42Љ 5Љ 1/2Љ AX1SED4239 ( )( ) 337. 42Љh panel/ 39Љh spine + 4Љ crown 43Љ 5Љ 1/2Љ AX1SED4339C ( )( ) 337. 50Љh panel/ 39Љh spine 50Љ 5Љ 1/2Љ AX1SED5039 ( )( ) 352. 50Љh panel/ 48Љh spine + 1Љ crown 50Љ 5Љ 1/2Љ AX1SED5048 ( )( ) 371. 50Љh panel/ 48Љh spine + 4Љ crown 52Љ 5Љ 1/2Љ AX1SED5248C ( )( ) 352. 57Љh panel/ 39Љh spine 57Љ 5Љ 1/2Љ AX1SED5739 ( )( ) 405. 57Љh panel/ 48Љh spine 57Љ 5Љ 1/2Љ AX1SED5748 ( )( ) 405. 64Љh panel/ 39Љh spine 64Љ 5Љ 1/2Љ AX1SED6439 ( )( ) 420. 64Љh panel/ 48Љh spine 64Љ 5Љ 1/2Љ AX1SED6448 ( )( ) 420. 78Љh panel/ 48Љh spine 78Љ 5Љ 1/2Љ AX1SED7848 ( )( ) 641. 78Љh panel/ 64Љh spine 78Љ 5Љ 1/2Љ AX1SED7864 ( )( ) 612.

Order Code Specification Information Application Notes

Example: AX1 SED 6448 613 812 For spine end connectors with panel Spine end connectors are complete When attached panel/screen is AX1 Spine connector lower than spine specify crown type end cover and trim for an between the nominal height of the and finish for crown end cap. AutoStrada or Currents spine. Side spine and the top of the Currents SED Type 1. Crown type: edges of spine end connectors 4Љh crown, spine end connector 64 Panel height C=Currents standard 4Љh accept end starters for Dividends must cover the entire height of the 48 Spine height L=low profile flat 1Љh Horizon panels and screens. spine with crown. 1 613 Vertical cover finish H=high profile flat 1 /4Љh F=compact 1Љh In most cases spine end connectors Spine end connectors include 812 Top cap finish match the height of the attached painted aluminum outside cover 2. All crown end caps are available Dividends Horizon panel/screen. with flat top cap and inside cover in all painted finishes. When attached panel/screen is (where applicable) over the end of lower than the spine, the spine end the spine. For all spine end connectors connector is as high as the nominal specify vertical cover and top height of the spine and the crown Inside base trim for Currents trim finish: requires an end cap. raceway is recommended to finish inside when combined with Specify low profile flat metal crown standard Currents recessed base 3. Vertical cover finish: covers to align with a 50Љh All standard paint finishes raceway covers. Base trim is not Dividends Horizon panel/screen. required with AutoStrada spine base 4. Top cap for vertical cover: covers. 812=Easy Grey 813=Trim Grey And all standard painted finishes

End connectors on this page begin 1/2Љ above floor. 33 Spine ends and connectors Currents 31/2Љ spine extender kit for use with ceiling infeed or panels

description application h w d pattern no. list Spine extender kit for use 39Љh spine 39Љ 5Љ 4Љ AX1SX39 C (L/C/P)( )( )( ) $700. with Currents Spine 48Љh spine 48Љ 5Љ 4Љ AX1SX48 C (L/C/P)( )( )( ) 723. 64Љh spine 64Љ 5Љ 4Љ AX1SX64 C (L/C/P)( )( )( ) 855.

Spine extender kit for use 39Љh spine 39Љ 5Љ 4Љ AX1SX39 A (L/C/P)( )( )( ) 843. with AutoStrada Spine 48Љh spine 48Љ 5Љ 4Љ AX1SX48 A (L/C/P)( )( )( ) 864. 64Љh spine 64Љ 5Љ 4Љ AX1SX64 A (L/C/P)( )( )( ) 1,002.

Order Code Specification Information Application Notes

Example: AX1 SX 48 AL 613 613 For all 3 1/2Љ spine extenders specify Spine extenders include brackets, This extension can also make up for 613 spine base type: side and top trim covers between the the dimensional gain of one AX1 Spine connector end of a spine and any spine end Dividends Horizon panel or screen A AutoStrada connector to add 3 1/2Љ to the length in the middle of a cluster of SX Type C Currents of a spine. workstations. 48 Spine height Then specify crown end type. Spine end connector must be A Spine type L=Flat low/high profile metal crown In most cases the spine end specified separately to finish off connector matches the height of the L Crown end type end cap face of spine extender. C=Standard and compact sloped attached Dividends Horizon panel 613 Top cap finish end cap or screen, but the extending area is Spine extender dimension matches only as high as the nominal height 613 Cover finish P=Power Pole 1 that of the Currents 3 /2Љx 5Љ ceiling of the spine (bottom of crown) so the 613 Base trim finish Then specify finish for vertical trim infeed panel which may be added crown always requires an end cap. covers, all standard painted between nominal spine height and finishes. ceiling for connection to building When attached panel or screen is power, data and communications lower than the spine, the spine end Then specify base cover finish. supply. connector should be the same height AutoStrada spine base covers are as the nominal height of the spine. clear anodized aluminum (AA) or painted finish excluding silver. Currents spine raceway covers are available in any painted finish only. Then specify top cap finish (if applicable). 34 End Starters Currents To attach Dividends Horizon panels and screens to spine end connector description application h w d pattern no. list End starters for Dividends 36Љh panel, flush, left end of Service Wall 36Љ 1Љ 3Љ AX1DHES3600L(5)( ) $266. Horizon panels and screens 36Љh panel, flush, right end of Service Wall 36Љ 1Љ 3Љ AX1DHES3600R(5)( ) 266. 36Љh panel, offset 1 panel thickness, left end of 36Љ 1Љ 3Љ AX1DHES3603L(5)( ) 266. Service Wall Service Walls and components 36Љh panel, offset 1 panel thickness, right end of 36Љ 1Љ 3Љ AX1DHES3603R(5)( ) 266. Service Wall 42Љh panel, flush, left end of Service Wall 42Љ 1Љ 3Љ AX1DHES4200L(5)( ) 266. 42Љh panel, flush, right end of Service Wall 42Љ 1Љ 3Љ AX1DHES4200R(5)( ) 266. 42Љh panel, offset 1 panel thickness, left end of 42Љ 1Љ 3Љ AX1DHES4203L(5)( ) 266. Service Wall 42Љh panel, offset 1 panel thickness, right end of 42Љ 1Љ 3Љ AX1DHES4203R(5)( ) 266. Service Wall 50Љh panel, flush, left end of Service Wall 50Љ 1Љ 3Љ AX1DHES5000L(5)( ) 266. 50Љh panel, flush, right end of Service Wall 50Љ 1Љ 3Љ AX1DHES5000R(5)( ) 266. 50Љh panel, offset 1 panel thickness, left end of 50Љ 1Љ 3Љ AX1DHES5003L(5)( ) 266. Service Wall 50Љh panel, offset 1 panel thickness, right end of 50Љ 1Љ 3Љ AX1DHES5003R(5)( ) 266. Service Wall 57Љh panel, flush, left end of Service Wall 57Љ 1Љ 3Љ AX1DHES5700L(5)( ) 266. 57Љh panel, flush, right end of Service Wall 57Љ 1Љ 3Љ AX1DHES5700R(5)( ) 266. 57Љh panel, offset 1 panel thickness, left end of 57Љ 1Љ 3Љ AX1DHES5703L(5)( ) 266. Service Wall 57Љh panel, offset 1 panel thickness, right end of 57Љ 1Љ 3Љ AX1DHES5703R(5)( ) 266. Service Wall 64Љh panel, flush, left end of Service Wall 64Љ 1Љ 3Љ AX1DHES6400L(5)( ) 266. 64Љh panel, flush, right end of Service Wall 64Љ 1Љ 3Љ AX1DHES6400R(5)( ) 266. 64Љh panel, offset 1 panel thickness, left end of 64Љ 1Љ 3Љ AX1DHES6403L(5)( ) 266. Service Wall 64Љh panel, offset 1 panel thickness, right end of 64Љ 1Љ 3Љ AX1DHES6403R(5)( ) 266. Service Wall

Order Code Specification Information Application Notes

Example: AX1 DHES 36 00 L (5) 1.Offset End starters connect a Dividends For a single workstation (0 AX1 Spine connector 00=Flush Horizon panel or screen to either intermediate panels), specify 2 03=Offset 1 panel thickness side of a same height or taller spine spine end connectors and 2 end DH Dividends Horizon end connector. End starters for starters positioned offset by 1 panel ES End starter 2.Top cap type Dividends Horizon panels and thickness. 36 Panel height 5=Metal flat screens include specified end top cap. For a cluster of 2 workstations (1 00 Offset 3.Paint finish intermediate panel), specify 1 panel 5 Top cap type All standard paint finishes End starters may be positioned in starter, 2 spine end connectors, 1 spine extender, and 2 end starters 613 Painted finish either of two configurations: flush with end of spine or offset one panel positioned offset by 1 panel thickness beyond end of spine. For thickness. full access to entire width of spine For a cluster of 3 workstations, (2 surface, position end starters offset intermediate panels), extend the one panel thickness. spine another 12Љ, specify 2 panel starters, 2 spine end connectors, and 2 end starters positioned flush. For a cluster of 4 workstations (3 intermediate panels), extend the spine 12Љ and specify 3 panel starters, 2 spine end connectors, and 2 end starters (1 end starter flush and the other offset by 1 panel thickness). For a cluster of 5 workstations (4 intermediate panels) extend the spine by 12Љ and specify 4 panel starters, 2 spine end connectors, and 2 end starters positioned offset by 1 panel thickness. 35 Panel system starters and T-ends Currents Reff panel starters and T-ends

0Љ or 1 1/8Љ 3 1/2Љ description type pattern no. price extension extension Reff panel starter 34ЉH (includes AA1RTC bracket) AA1RPS34( )( )( )( ) $187. 42ЉH (includes AA1RTC bracket) AA1RPS42( )( )( )( ) 326. 49ЉH (includes AA1RTC bracket) AA1RPS49( )( )( )( ) 335. 64ЉH (includes AA1RTC bracket) AA1RPS64( )( )( )( ) 356. 79ЉH (includes AA1RTC bracket) AA1RPS79( )( )( )( ) 369.

T-end frame for Reff panels 42Љ Reff panel to 39Љ Currents AX1 R34239( )( ) 1,337. 1,476. 49Љ Reff panel to 39Љ Currents AX1 R34939( )( ) 1,350. 1,488. 49Љ Reff panel to 48Љ Currents AX1 R34948( )( ) 1,267. 1,398. 64Љ Reff panel to 39Љ Currents AX1 R36439( )( ) 1,494. 1,628. 64Љ Reff panel to 48Љ Currents AX1 R36448( )( ) 1,406. 1,542. 64Љ Reff panel to 64Љ Currents AX1 R36464( )( ) 1,406. 1,542. 79Љ Reff panel to 39Љ Currents AX1 R37939( )( ) 1,507. 1,642. 79Љ Reff panel to 48Љ Currents AX1 R37948( )( ) 1,417. 1,549. 79Љ Reff panel to 64Љ Currents AX1 R37964( )( ) 1,372. 1,507.

Top clip (replacement part) AA1RTC( ) 134.

Order Code Specification Information Application Notes

Example: AA1-RPS64 48 A 613 For T-end specify extension at end of Panel starters attach perpendicular Specify two 0Љ T-ends for a single 613 spine, then paint finish. Extension at Reff panels to Service Wall. Panel workstation on each side (no AA1 Accessory end of Service Wall: starter includes clamp bracket to intermediate panels). structural base cover, top clip, Љ 1 0 0 extension 8Љ R Reff 1 vertical extrusion corresponding to Specify two 1 / T-ends for one 8Љ 1 1 1 / extension 8Љ 1 Reff panel height and top trim for intermediate panel, one 1 / and PS Panel starter 3 3 /2Љ extensions 1 adjoining panel. one 3 /2Љ for two panels, and two 64 Panel height 3 1/2Љ for three intermediate panels. 48 Adjoining panel width Specify following for panel starter: T-end encloses the end of a Service T-ends with 3 1/2Љ extension have A Panel top trim profile 1 Adjoining panel width Wall and connects to perpendicular 2 Top trim profile of adjoining Reff panels on one or both sides. removable inside covers and accept 613 Finish, panel starter panel ceiling infeed panel. 613 Panel top trim finish 3 Painted finish for panel Specify Reff straight connector separately to attach panel. Only Reff finishes are available for starter AA1RTC( ) top clip. 4 Top trim finish Specify Reff end connector to finish side edge without a connected wall.

In addition to Currents finishes, all Specify T-end with 0Љ, 1 1/8Љ, or 3 1/2Љ standard Reff system painted of extension to accommodate the finishes are available. ‘‘creep’’ of panels between workstations on each side of Service When ordering T-ends for the Wall. Service Wall, specify crown end caps separately. 36 Panel system starters and T-ends Currents Reff T-end fabric and wood cover sets

description type height pattern no. list price Monolithic cover set Fabric 42Љ R3B0P0F4207 $199. 49Љ R3B0P0F4907 224. 64Љ R3B0P0F6407 264. 79Љ R3B0P0F7907 304. Service Walls and components

Wood 42Љ R3B0P0H4207 203. 49Љ R3B0P0H4907 231. 64Љ R3B0P0H6407 271. 79Љ R3B0P0H7907 309.

Tiled cover set Fabric 42Љ R3B0T0F4207 199. 49Љ R3B0T0F4907 224. 64Љ R3B0T0F6407 264. 79Љ R3B0T0F7907 304.

Wood 42Љ R3B0T0H4207 203. 49Љ R3B0T0H4907 231. 64Љ R3B0T0H6407 271. 79Љ R3B0T0H7907 309.

Order Code Specification Information Application Notes

Example: R3B0P0F4207 See Reff System for full selection of Specify covers in monolithic or tiled When ordering T-ends for the R3B Reff painted finishes, fabrics and wood sets to complete T-end frames for Service Wall, specify crown end veneers for T-end cover sets. Reff. caps separately. 0P0F Monolithic 42 Panel height Specify: Monolithic cover sets include a raceway cover and a single snap-in 07 Width 1. Top trim profile 2. Panel finishes panel above. 3. Top trim finish Tiled sets include raceway cover 4. Base finish and segmented tiles corresponding Top trim profile: to adjacent Reff tiled panels. A Flat Reff tiled module horizontal reveals B Square are at nominal 19Љ, 34Љ, 49Љ and 64Љ C Bullnose above the floor and do not align with service wall cover reveals. Base height: 4 4Љ base height 6Љ base height is currently not available. 37 Panel system starters and T-ends Currents Universal panel starters and T-ends

description w d h pattern no. paint Universal T-end adapter 2-6Љ 7Љ 39Љ AA1UA39( ) $115. 2-6Љ 7Љ 48Љ AA1UA48( ) 141. 2-6Љ 7Љ 64Љ AA1UA64( ) 154.

Universal panel starters 3Љ 1Љ 39Љ AA1UPS39( ) 261. 3Љ 1Љ 48Љ AA1UPS48( ) 279. 3Љ 1Љ 64Љ AA1UPS64( ) 299.

Universal top clip AA2 UTC ( ) 112.

Order Code Specification Information Application Notes

Example: AA1 UPS48 612 Specify paint finishes for Universal Universal adapters and starters AA1 Accessory end and panel starter. integrate other panel systems with the Service Wall. Vertical surface UPS Panel starter accepts architectural wall starter of 48 Panel height most other systems. 612 Finish T-end adapters include connector to corresponding height T-end for Currents screen (specified separately). Panel starter includes clamp bracket to structural base cover on Service Wall. Top clip gives added stability to attached panels of the same height or higher than the Service Wall. 38 Panel system starters and T-ends Currents Fence panel starters

description type w d h pattern no. list price Universal panel starter 3Љ 1Љ 35Љ AA1FUPS39( ) $168. Service Walls and components

Universal top clip AA2 UTC ( ) 112.

Order Code Specification Information Application Notes Specify paint finish for panel starters Panel starters attach perpendicular Universal panel starters integrate and top clip. panels to the Fence bottom rail. other panel systems with Fence. Vertical surface accepts Panel starters include clamp architectural wall starters of most bracket and full height connector other systems. track with modified top wedge block. Fence T-ends adaptors, stabilizer end cabinet adaptors, high-low Top clip connects panel connector straight connectors and universal track with the Fence or Service Wall panel starters are only compatible crown. Specify top clip for added with Fence frames that are specified stiffness of panels higher than 48Љ or at 40 inches high with the 18- 1/2Љ whenever cantilevering components high leg (AX1 LEG). To use these from panel. components when Fence is planned Top clip is not compatible with end with shorter legs that deliver overall trim. heights of 27 or 28 inches high, please contact Knoll Custom Product Development for assistance. 39 Panel system starters for Dividends Horizon Currents Dividends Horizon panel and screen starters

description application h w d pattern no. list Service Wall starters for Dividends 36Љ high Dividends Horizon Panel or Screen 36Љ 1Љ 3Љ AA1DHPS36(5)( ) $437. Horizon panels and screens 42Љ high Dividends Horizon Panel or Screen 42Љ 1Љ 3Љ AA1DHPS42(5)( ) 437. 50Љ high Dividends Horizon Panel or Screen 50Љ 1Љ 3Љ AA1DHPS50(5)( ) 437. 57Љ high Dividends Horizon Panel or Screen 57Љ 1Љ 3Љ AA1DHPS57(5)( ) 437. 64Љ high Dividends Horizon Panel or Screen 64Љ 1Љ 3Љ AA1DHPS64(5)( ) 437.

Top clip for Dividends Horizon Top clip for Dividends Horizon Panel/Screen to AA1DHTC( ) 113. panels and screens to lower Service Wall Service Wall

Order Code Specification Information Application Notes

Example: AA1 DHPS 36 (5) 1.Top cap type Panel/screen starter includes a AA1 Accessory 5=Metal flat clamp bracket that attaches to the structural base cover of the Service DH Dividends Horizon 2.Paint finish Wall to start a Dividends PS Panel starter All standard paint finishes panel/screen run perpendicular to 36 Panel height the face of the Service Wall anywhere other than at the end of 5 Top cap type the Service Wall. 613 Painted finish Top clip, which secures top edge of panel to underside of Service Wall crown, is required in addition to panel starter for stability of 57Љ or higher panels or 50ЉH panels with cantilevered shelves overhead storage.

40 Power, data and communications components for Service Currents Walls 2+2 raceway outlet module, central switch and outlets

orange(-O) or Orange description type w d h pattern no. black triangle(-T) no finish Desk height outlet module 21-48ЉH 5Љ – 6Љ AR1 EOM $238. Service Walls and components

Central switch 21-48ЉH AR1-ELS-B 664.

Duplex outlet Circuit A AR1 DA 57. Circuit A, with controlled symbol AR1 DAC 57. Circuit B AR1 DB 57. Circuit B, with controlled symbol AR1 DBC 57. Circuit X AR1 DX 57. 63. Circuit X, with controlled symbol AR1 DXC 57. Circuit Y AR1 DY 57. 63. Circuit Y, with controlled symbol AR1 DYC 57.

Order Code Specification Information Application Notes

Example: AR1 EOM Raceway components distribute four Service Wall power may be Central switch includes white AR1 Raceway 20-amp circuits at desk height or distributed point-to-point between rocker switch, connector to adjacent service wall base: two convenience outlet modules at desk height or in outlet module, and three simplex E 2+2 circuits and two protected circuits, the base raceway. outlets on circuit B (2+2 or 3+3). OM Outlet module with separate grounds and heavy duty #10 neutrals. Outlet housings and power rails Outlet modules and power rails accept two duplex outlets on each accept two duplex outlets on each face and four connector/jumper face. Specify outlets with black face cables. for convenience circuits. Specify orange face or black with orange Modular desk-height outlet module triangle for protected circuits with mounts between frame studs at any separate ground and neutral in height from 21Љ - 48Љ, above or building power supply. below adjacent worksurfaces. Each 12ЉW frame bay can accept two outlet housings (up to four duplex outlets on each side.) Central switch controls three outlets inside Service Wall frame for task or ambient lights. Switch occupies right-hand outlet opening in outlets cover on one side of Service Wall. Switches cannot be positioned back-to-back in combination with an outlet module. 41 Power, data and communications components for Service Currents Walls 2+2 raceway other hardware description type w d h pattern no. no finish Power infeeds, modular Base power 49Љ AR1 EPI2 $227. Ceiling infeed 145Љ AR1 EPIC 343. Desk height power 85Љ AR1 EPI5 274.

Hardwire base infeeds (NYC) One connector AR1 EPH1 455. Two connectors AR1 EPH2 684.

Transitional connectors for Reff 12Љ 61Љ AR1 ET1 252. 36Љ 85Љ AR1 ET3 317. 60Љ 109Љ AR1 ET5 364. 96Љ 133Љ AR1 ET8 405.

Jumper cable 12Љ wall/36Љ desk 37Љ AR1 EJ1 138. 120Љ wall/144Љ desk 145Љ AR1 EJ10 363. 144Љ wall 169Љ AR1 EJ12 405. 24Љ wall/48Љ desk 49Љ AR1 EJ2 182. 36Љ wall/60Љ desk 61Љ AR1 EJ3 207. 48Љ wall/72Љ desk 73Љ AR1 EJ4 223. 60Љ wall/84Љ desk 85Љ AR1 EJ5 252. 72Љ wall/96Љ desk 97Љ AR1 EJ6 274. 96Љ wall/120Љ desk 121Љ AR1 EJ8 317.

Order Code Specification Information Application Notes

Example: AR1 ET1 Raceway components distribute four Desk height power infeed connects distance from Service Wall AR1 Raceway 20-amp circuits at desk height or from floor box to desk height outlets desk-height outlet module to panel base: two convenience module inside Service Wall. perpendicular panel with powered E 2+2 circuits and two protected circuits, base. T Transitional with separate grounds and heavy Ceiling infeed connects from ceiling duty #10 neutrals. junction box to desk height outlet Specify jumper cables between 1 Length module or to base power rail. outlet modules. Application NOTE: The City of New York does Specify Currents ceiling infeed dimension indicates maximum not approve use of liquid-tight panel separately. Service Wall cover width between PVC conduit.For installations outlets covers at the same height. anywhere in the City of New York, Base power infeed connects Excess cable may be stored in specify NYC infeed kits (AR1 building power to either end of base interior of wall frame. EPH1or 2, AR1 TPH1 or 2), which raceway power rail. Base raceway power rail is do not contain PVC. To connect Hardwire base infeed is approved power from the Service Wall to suspended between panel supports for City of New York installations. 3Љ above floor. 48Љ Service Wall wall-started panels: specify Infeed includes junction box for standard (not transitional) jumper accepts one 12Љ rail, 60Љ Service base raceway and connector to desk Wall accepts one 24Љ rail, 72Љ cables. Also specify Raceway Cable height outlet module, or two Managers (AR1 RCM) to support accepts two 12Љ rails. 12Љrails may connectors to adjacent base raceway also be inserted at any straight power jumpers within the Service power rails. Wall base between the base or connection. desk-height power module and the Transitional connectors connect Specify 12Љ base power connector attached panel. Service Wall power components to between 12Љ rails in a 72ЉW Service powered Reff panels. Application Wall base, or straddling a Service dimension indicates Wall connection. Specify 36Љ base power connector to pass through a connection between adjacent powered bases. 42 Power, data and communications components for Service Currents Walls 2+2 raceway other hardware description type w d h pattern no. no finish Base raceway power rail 48Љ or 72Љ frame 12Љ – 2Љ AR1 E2 $252. 60Љ frame 24Љ – 2Љ AR1 E3 298. Service Walls and components

Base power connector Frame to frame 36Љ AR1 EPC2 138. Within a frame 12Љ AR1 EPC1 114.

Order Code Specification Information Application Notes

Example: AR1 ET1 Raceway components distribute four Desk height power infeed connects distance from Service Wall AR1 Raceway 20-amp circuits at desk height or from floor box to desk height outlets desk-height outlet module to panel base: two convenience module inside Service Wall. perpendicular panel with powered E 2+2 circuits and two protected circuits, base. T Transitional with separate grounds and heavy Ceiling infeed connects from ceiling duty #10 neutrals. junction box to desk height outlet Specify jumper cables between 1 Length module or to base power rail. outlet modules. Application NOTE: The City of New York does Specify Currents ceiling infeed dimension indicates maximum not approve use of liquid-tight panel separately. Service Wall cover width between PVC conduit.For installations outlets covers at the same height. anywhere in the City of New York, Base power infeed connects Excess cable may be stored in specify NYC infeed kits (AR1 building power to either end of base interior of wall frame. EPH1or 2, AR1 TPH1 or 2), which raceway power rail. Base raceway power rail is do not contain PVC. To connect Hardwire base infeed is approved power from the Service Wall to suspended between panel supports for City of New York installations. 3Љ above floor. 48Љ Service Wall wall-started panels: specify Infeed includes junction box for standard (not transitional) jumper accepts one 12Љ rail, 60Љ Service base raceway and connector to desk Wall accepts one 24Љ rail, 72Љ cables. Also specify Raceway Cable height outlet module, or two Managers (AR1 RCM) to support accepts two 12Љ rails. 12Љrails may connectors to adjacent base raceway also be inserted at any straight power jumpers within the Service power rails. Wall base between the base or connection. desk-height power module and the Transitional connectors connect Specify 12Љ base power connector attached panel. Service Wall power components to between 12Љ rails in a 72ЉW Service powered Reff panels. Application Wall base, or straddling a Service dimension indicates Wall connection. Specify 36Љ base power connector to pass through a connection between adjacent powered bases. 43 Power, data and communications components for Service Currents Walls 3+3 raceway outlet module, central switch and outlets

orange(-O) or Orange description type w d h pattern no. black triangle(-T) no finish Desk-height outlet module 21Љ-48ЉH 6Љ 1Љ 9Љ AR1 TOM $274.

Central switch 21-48ЉH AR1-ELS-B 664.

Duplex outlet Circuit A AR1 DA 57. Circuit A, with controlled symbol AR1 DAC 57. Circuit B AR1 DB 57. Circuit B, with controlled symbol AR1 DBC 57. Circuit C AR1 DC 57. Circuit C, with controlled symbol AR1 DCC 57. Circuit X AR1 DX 57. 63. Circuit X, with controlled symbol AR1 DXC 57. Circuit Y AR1 DY 57. 63. Circuit Y, with controlled symbol AR1 DYC 57. Circuit Z AR1 DZ 57. 63. Circuit Z, with controlled symbol AR1 DZC 57.

Order Code Specification Information Application Notes

Example: AR1 TOM Raceway components distribute six Service Wall power may be Central switch includes white AR1 Raceway 20-amp circuits at desk height or distributed point-to-point between rocker switch, connector to adjacent wall base: three convenience outlet modules at desk height or in outlet module, and three simplex T 3+3 circuits and three protected circuits, the base raceway. outlets on circuit B (2+2 or 3+3). OM Outlet Module with separate grounds and heavy-duty #10 neutrals. Outlet housings and power rails Outlet modules and power rails accept two duplex outlets on each accept two duplex outlets on each face and four connector/jumper face. Specify outlets with black face cables. for convenience circuits. Specify orange face or black with orange Modular desk-height outlet module triangle for protected circuits with mounts between frame studs at any separate ground and neutral in height from 21Љ - 48Љ, above or building power supply. below adjacent worksurfaces. Each 12ЉW frame bay can accept two outlet housings (up to four duplex outlets on each side.) Central switch controls three outlets inside Service Wall frame for task or ambient lights. Switch occupies right-hand outlet opening in outlets cover on one side of Service Wall. Switches cannot be positioned back-to-back in combination with an outlet module. 44 Power, data and communications components for Service Currents Walls 3+3 raceway other hardware description type w d h pattern no. no finish Power infeeds Base power 49Љ AR1 TPI2 $274. Ceiling infeed 145Љ AR1 TPIC 390. Desk height power 85Љ AR1 TPI5 317. Service Walls and components

Hardwire base infeeds (NYC) One connector AR1 TPH1 503. Two connectors AR1 TPH2 779.

Jumper cable 12Љ wall/36Љ desk 37Љ AR1 TJ1 156. 120Љ wall/144Љ desk 145Љ AR1 TJ10 405. 144Љ wall 169Љ AR1 TJ12 454. 24Љ wall/48Љ desk 49Љ AR1 TJ2 207. 36Љ wall/60Љ desk 61Љ AR1 TJ3 252. 48Љ wall/72Љ desk 73Љ AR1 TJ4 274. 60Љ wall/84Љ desk 85Љ AR1 TJ5 298. 72Љ wall/96Љ desk 97Љ AR1 TJ6 317. 96Љ wall/120Љ desk 121Љ AR1 TJ8 363.

Transitional connectors for Reff 12Љ 61Љ AR1 TT1 298. 36Љ 85Љ AR1 TT3 364. 60Љ 109Љ AR1 TT5 405. 96Љ 133Љ AR1 TT8 455.

Base raceway power rail 48Љ or 72Љ frame 12Љ AR1 T2 298. 60Љ frame 24Љ AR1 T3 343.

Base power connectors Frame to frame 37Љ AR1 TPC2 156. Within a frame 13Љ AR1 TPC1 138.

Order Code Specification Information Application Notes

Example: AR1 TT5 Raceway components distribute four Desk height power infeed connects distance from Service Wall AR1 Raceway 20-amp circuits at desk height or from floor box to desk height outlets desk-height outlet module to panel base: two convenience module inside Service Wall. perpendicular panel with powered T 3+3 circuits and two protected circuits, base. T Transitional with separate grounds and heavy Ceiling infeed connects from ceiling duty #10 neutrals. junction box to desk height outlet Specify jumper cables between 5 Length module or to base power rail. outlet modules. Application NOTE: The City of New York does Specify Currents ceiling infeed dimension indicates maximum not approve use of liquid-tight panel separately. Service Wall cover width between PVC conduit.For installations outlets covers at the same height. anywhere in the City of New York, Base power infeed connects Excess cable may be stored in specify NYC infeed kits (AR1 building power to either end of base interior of wall frame. EPH1or 2, AR1 TPH1 or 2), which raceway power rail. Base raceway power rail is do not contain PVC. To connect Hardwire base infeed is approved power from the Service Wall to suspended between panel supports for City of New York installations. 3Љ above floor. 48Љ Service Wall wall-started panels: specify Infeed includes junction box for standard (not transitional) jumper accepts one 12Љ rail, 60Љ Service base raceway and connector to desk Wall accepts one 24Љ rail, 72Љ cables. Also specify Raceway Cable height outlet module, or two Managers (AR1 RCM) to support accepts two 12Љ rails. 12Љrails may connectors to adjacent base raceway also be inserted at any straight power jumpers within the Service power rails. Wall base between the base or connection. desk-height power module and the Transitional connectors connect Specify 12Љ base power connector attached panel. Service Wall power components to between 12Љ rails in a 72ЉW Service powered Reff panels. Application Wall base, or straddling a Service dimension indicates Wall connection. Specify 36Љ base power connector to pass through a connection between adjacent powered bases. 45 Power, data and communications components for Service Currents Walls replacement components for Equity

orange(-O) or Orange description type w d h pattern no. black triangle(-T) no finish Replacement duplexes for Equity Circuit A ARE1 DA $57. Circuit B ARE1 DB 57. Circuit C ARE1 DC 57. Circuit X ARE1 DX 57. Circuit X, orange face or orange triangle ARE1 DX (O or T) 63. Circuit Y ARE1 DY 57. Circuit Y, orange face or orange triangle ARE1 DY (O or T) 63. Circuit Z ARE1 DZ 57. Circuit Z, orange face or orange triangle ARE1 DZ (O or T) 63.

Transitional power connector Equity 2+2 12Љ 61Љ ARE1 ET1 252. 36Љ 85Љ ARE1 ET3 317. 60Љ 109Љ ARE1 ET5 364.

Transitional power connector Equity 3+3 12Љ 61Љ ARE1 TT1 298. 36Љ 85Љ ARE1 TT3 364. 60Љ 109Љ ARE1 TT5 405.

Replacement power infeed, Equity panel 2+2 ARE1 EP1 374. 3+3 ARE1 TP1 435.

Order Code Specification Information Application Notes

Example: ARE1 ET3 Replacement duplexes for Equity Transitional power connector ARE1 Currents/Equity raceway convert existing 3+1 terminal connects Service Wall power blocks in Equity panels to 2+2 when components to Equity panel base E Eight wire 2+2 connected to and supplied by power. T Transitional connector Service Wall 2+2 or 3+3 power. Application dimension indicates 3 Width distance between Service Wall outlet module (at 30Љ - 39ЉH) and perpendicular panel. Specify replacement power infeed when supplying power to Service Wall from Equity panel base infeed. 46 Power, data and communications components for Service Currents Walls accessories, ceiling nfeed panel description type w d h pattern no. no finish Paint

Cable clips for wall studs (100) 1/4Љ 1/2Љ 1 1/2Љ AR1 PCC 100 $114. Service Walls and components

High capacity cable holders (10) 1Љ 3/4Љ 2 1/2Љ AR1 HCC H10 48.

Raceway cable managers (10) AR1 RCM 10 93.

Ceiling infeed panel for stabilizer end cabinet, 3 1/2Љ 5Љ 48Љ APX CIP4 ( ) 698. T-end or power monument 3 1/2Љ 5Љ 72Љ APX CIP6 ( ) 815. 3 1/2Љ 5Љ 96Љ APX CIP8 ( ) 932.

Order Code Specification Information Application Notes

Example: AR1 PCC 100 Cable clips and cable managers are Specify cable clips, approximately Raceway cable managers are AR1 Raceway black plastic. 50 per wall frame to support and U-shape cable supports that snap manage cables on the face of studs into the underside of the Service PCC Cable clip Cable holders are light grey plastic. in the Service Wall frame. Each clip Wall frame. Plan one per foot to 100 Size / Quantity Specify painted finish for hardwire manages up to 14 Category 5 or contain data cables or power outlets cover or ceiling infeed panel. fiber optic cables; four clips attach jumpers in the base raceway. between 21Љ-30Љ, 30Љ-39Љ, 39Љ-48Љ; High capacity cable holders may not six between 48Љ-64ЉH. Only two Ceiling infeed panel attaches to end of Service Wall adjacent to Currents be used in conjunction with clips fit behind a cable tray cover at 1 AutoStrada access covers. the 21Љ-30Љ height.. or Reff T-end panel with 3 /2Љ extension, or to power monument. Specify high capacity cable holders Center channel, 2Љ x 2 1/2Љ, approximately 20 per Service Wall accommodates one or two power frame to support and manage larger infeed cables. Each side channel is bundles of cables. Each holds up to 1 1/2Љ x 3 1/2Љ lay-in cable raceway, for 55 Cat 5 cables; two holders attach continuous lay-in cabling from to studs at each 9Љ level; three ceiling to Service Wall surface. holders at the 16Љ level of a 64ЉH Service Wall. Only one holder fits Specify ceiling infeed separately. behind a cable tray cover at the 21Љ-30Љ height (upside down). 47 Power, data and communications components for Service Currents Walls PDC modules, modular communications description type w d h pattern no. black AMP PDC Modules Faceplate and 4 Enhanced Category 5 outlets AMC PDC 5E4N $306.

AMP Modular components Blank insert (10) AMC B10 36. Category 3 outlet (RJ11 six position) AMC O3 36. Category 6 quantum (RJ45, 110) AMC O6 71. Communications faceplates AMC FP2 (L or N) 36. Communications faceplates AMC FP3 (L or N) 36. Enhanced Category 5 outlet (RJ45, 110) AMC O5E 49. Fiber optics outlet 50/125 micron fiber jack AMC OF500 246. Fiber optics outlet 62.5/125 micron fiber jack AMC OF625 246.

AMP modular communications/ zone distribution AMP NetConnect consolidation point, 12-port AMC5 CP12 967. AMP NetConnect mounting bracket AMB CP12-AMP 63. AMP pre-terminated outlet cable, 20Ј AMC5 OC20(A or B) 121. AMP pre-terminated outlet cable, 30Ј AMC5 OC30(A or B) 138. AMP pre-terminated outlet cable, 40Ј AMC5 OC40(A or B) 147. AMP pre-terminated outlet cable, 50Ј AMC5 OC50(A or B) 155.

Lucent zone distribution Hinged mounting brackets for 24-port AMB CP24 LUC 177. consolidation point (pair)

Outlet fillers (Set of 10) AR OF 50.

Order Code Specification Information Application Notes

Example: MR3 AMP3B For AMP pre-terminated outlet PDC Modules are preconfigured or AMP Net Connect mounting bracket MR3 Raceway/PDC cables specify: created from modular components supports one 12-port consolidation and faceplate that snaps into point on stud or two in stabilizer end AMP Type T568A or T568B wiring. Service Wall outlets cover, raceway cabinet. 3B Configuration cover. For AMP outlet faceplates specify: AMP pre-terminated outlet cables L Light grey Specify PDC Module extenders for include outlet and plug into N Black adequate clearance between consolidation point. AMP outlet modules in back-to-back faceplate snaps into outlets cover applications, or for fiber optics ST and supports cable outlet. Amp outlets are black.Lucent connectors. faceplates are light grey. Each Lucent mounting bracket Specify blank filler plates for any supports one 24-port consolidation unused outlet openings in outlets point and is hinged for easy access. covers or raceway covers. Bracket mounts on Service Wall frame or stabilizer end cabinet. 48 Mobile screens Currents upholstered surfaces

description type w d h pattern no. 10 15 20 30 35 40 45 50 55 Mobile screen, upholstered 48ЉH 48Љ 2Љ 48Љ AF 4848 AM ( )( ) $2,198. $2,261. $2,321. $2,447. $2,506. $2,570. $2,631. $2,755. $2,879. 60Љ 2Љ 48Љ AF 4860 AM ( )( ) 2,401. 2,462. 2,531. 2,655. 2,714. 2,774. 2,836. 2,959. 3,083.

64ЉH 48Љ 2Љ 64Љ AF 6448 AM ( )( ) 2,387. 2,462. 2,548. 2,714. 2,793. 2,879. 2,959. 3,122. 3,287. 60Љ 2Љ 64Љ AF 6460 AM ( )( ) 2,793. 2,879. 2,959. 3,122. 3,207. 3,287. 3,369. 3,534. 3,704. Screens and add-up panels

Order Code Specification Information Application Notes

Example: AF 4872 TCM 612 Surface types: Upholstered screens are tackable, AF Screen A Tackable upholstered acoustical surface both sides. Continuous edge trim is trim grey. 48 Height Surface finishes: 72 Width The bottom 15Љ of upholstered C Crystal mobile screens consists of T Surface type supporting ballast board and is not C Surface finish Specify base finish. tackable area. M Base type Mobile screens are supported by 612 Base finish Base type: stabilizer feet. M Mobile Non-locking casters to meet BIFMA Specify fabric group: stability standards. 10 Fabric group 10 When ordering 60Љ wide 15 Fabric group 15 upholstered screens, please check 20 Fabric group 20 width of fabric selected. 30 Fabric group 30 35 Fabric group 35 40 Fabric group 40 50 Fabric group 50 55 Fabric group 55

49 Add-up panels Currents upholstered surface Service Wall crown applications description w d h pattern no. 10 15 20 30 35 40 45 50 55 12ЉH add-up panels 24Љ 2Љ 12Љ AU 1224 A ( ) $580. $602. $622. $666. $690. $710. $728. $778. $812. 36Љ 2Љ 12Љ AU 1236 A ( ) 666. 690. 710. 752. 778. 794. 812. 858. 904. 48Љ 2Љ 12Љ AU 1248 A ( ) 752. 778. 794. 836. 858. 878. 904. 942. 990. 60Љ 2Љ 12Љ AU 1260 A ( ) 878. 904. 924. 966. 990. 1,008. 1,028. 1,074. 1,114.

21ЉH add-up panels 24Љ 2Љ 21Љ AU 2124 A ( ) 716. 752. 786. 842. 878. 910. 942. 1,008. 1,074. 36Љ 2Љ 21Љ AU 2136 A ( ) 830. 858. 894. 954. 990. 1,022. 1,052. 1,114. 1,180. 48Љ 2Љ 21Љ AU 2148 A ( ) 930. 966. 998. 1,058. 1,096. 1,126. 1,158. 1,222. 1,288. 60Љ 2Љ 21Љ AU 2160 A ( ) 1,096. 1,126. 1,158. 1,222. 1,258. 1,288. 1,320. 1,386. 1,446.

28ЉH add-up panels 24Љ 2Љ 28Љ AU 2824 A ( ) 858. 904. 942. 1,028. 1,074. 1,114. 1,158. 1,240. 1,328. 36Љ 2Љ 28Љ AU 2836 A ( ) 990. 1,028. 1,074. 1,158. 1,206. 1,240. 1,288. 1,370. 1,456. 48Љ 2Љ 28Љ AU 2848 A ( ) 1,114. 1,158. 1,206. 1,288. 1,328. 1,370. 1,414. 1,502. 1,590. 60Љ 2Љ 28Љ AU 2860 A ( ) 1,310. 1,348. 1,400. 1,480. 1,524. 1,568. 1,608. 1,698. 1,778.

Order Code Specification Information Application Notes

Example: AU 2848 A20 Surface types: Add-up panels add visual and Overall height of service wall with 4Љ AU Add up panel A Tackable upholstered acoustical privacy above any height standard crown and Add-up panels: Service Wall. Bottom edge, with 28 Height Specify fabric group for upholstered Nominal Add-up Overall add-up panels: wedge-shape plugs, inserts in center wall height height 48 Width of crown at any point, regardless of 10 Fabric group 10 height A Surface type upmounted storage. Add-up panels 39Љ 12Љ 55Љ 15 Fabric group 15 include continuous edge trim. 20 Fabric group 20 Fabric group 20 39Љ 21Љ 64Љ 30 Fabric group 30 Upholstered add-up panels have 39Љ 28Љ 71Љ 35 Fabric group 35 been tested to NRC .60 and STC 21. 48Љ 12Љ 64Љ 40 Fabric group 40 48Љ 21Љ 73Љ 45 Fabric group 45 When ordering 60Љ wide panels, 48Љ 28Љ 80Љ 50 Fabric group 50 please check width of fabric 64Љ 12Љ 80Љ 55 Fabric group 55 selected. 64Љ 21Љ 89Љ Edge trim is integral color trim grey 64Љ 28Љ 96Љ finish. Specify wide add-up panels for use on long Service Wall and Fence runs. 50 Add up glass panels, for spine Currents

clear description type width depth height pattern number tempered powder

Add up panels frameless glass, 8Љh 24Љ 1/2Љ 8Љ AUA1 0824 G ( )( ) $330. $404. 36Љ 1/2Љ 8Љ AUA1 0836 G ( )( ) 376. 541. 48Љ 1/2Љ 8Љ AUA1 0848 G ( )( ) 487. 674. 60Љ 1/2Љ 8Љ AUA1 0860 G ( )( ) 599. 869. 72Љ 1/2Љ 8Љ AUA1 0872 G ( )( ) 674. 1,050.

frameless glass, 12Љh 24Љ 1/2Љ 12Љ AUA1 1224 G ( )( ) 396. 455. 36Љ 1/2Љ 12Љ AUA1 1236 G ( )( ) 561. 643. 48Љ 1/2Љ 12Љ AUA1 1248 G ( )( ) 714. 826. 60Љ 1/2Љ 12Љ AUA1 1260 G ( )( ) 873. 1,010. 72Љ 1/2Љ 12Љ AUA1 1272 G ( )( ) 1,034. 1,188. Screens and add-up panels

frameless glass, 15Љh 24Љ 1/2Љ 15Љ AUA1 1524 G ( )( ) 404. 709. 36Љ 1/2Љ 15Љ AUA1 1536 G ( )( ) 561. 786. 48Љ 1/2Љ 15Љ AUA1 1548 G ( )( ) 719. 1,129. 60Љ 1/2Љ 15Љ AUA1 1560 G ( )( ) 883. 1,274. 72Љ 1/2Љ 15Љ AUA1 1572 G ( )( ) 1,040. 1,491.

Order Code Specification Information Application Notes

Example: AUA1 1248 G TEMP AA Add up type: Add-up panels add acoustical Any height add up can be used on AUA1 Autostrada add up panel G Glass privacy and light control above any any height AutoStrada or Currents height Service Wall. Service Wall or Fence. 12 Height Glass add-ups are available with the • 8Љh Add ups are designed 48 Width Anodized aluminum or painted base following glass options: frame inserts in center of any primarily for use on 39Љh spine G Type TEMP Clear tempered Service Wall crown and is secured with 1Љh crown to create a 48Љh TEMP Glass Finish GL13 Powder by bolts within crown. horizon. • 12Љh Add ups are designed for AA Trim Finish Specify wide add-up panels for use Frameless glass add-ups can be use on 48Љh spine for a 61Љ on long Service Wall and Fence positioned at any 3Љ increment in horizon with 1Љh crown or a 64Љ runs. standard or compact crown with any horizon with 4Љh crown. cover type. • 15Љh Add ups are designed primarily for use on 48Љh spine with 1Љh crown for a 64Љ horizon.

51 Worksurfaces, universal Currents straight, curved and flat front 13/4Љ wire drop description w d h pattern no. lam.

24ЉD straight worksurface, curved front 24Љ 22 1/4Љ 1Љ AW1 S2424 ( ) $400. 30Љ 22 1/4Љ 1Љ AW1 S3024 ( ) 439. 36Љ 22 1/4Љ 1Љ AW1 S3624 ( ) 480. 42Љ 22 1/4Љ 1Љ AW1 S4224 ( ) 520. 48Љ 22 1/4Љ 1Љ AW1 S4824 ( ) 557. 60Љ 22 1/4Љ 1Љ AW1 S6024 ( ) 640. 66Љ 22 1/4Љ 1Љ AW1 S6624 ( ) 680. 72Љ 22 1/4Љ 1Љ AW1 S7224 ( ) 720. 84Љ 22 1/4Љ 1Љ AW1 S8424 ( ) 799.

30ЉD straight worksurface, curved front 36Љ 28 1/4Љ 1Љ AW1 S3630 ( ) 541. 48Љ 28 1/4Љ 1Љ AW1 S4830 ( ) 615. 60Љ 28 1/4Љ 1Љ AW1 S6030 ( ) 720. 72Љ 28 1/4Љ 1Љ AW1 S7230 ( ) 838. 84Љ 28 1/4Љ 1Љ AW1 S8430 ( ) 962.

24ЉD Straight worksurface, flat front 24Љ 22 1/4Љ 1Љ AW1 F2424 ( ) 400. 30Љ 22 1/4Љ 1Љ AW1 F3024 ( ) 439. 36Љ 22 1/4Љ 1Љ AW1 F3624 ( ) 480. 42Љ 22 1/4Љ 1Љ AW1 F4224 ( ) 520. 48Љ 22 1/4Љ 1Љ AW1 F4824 ( ) 557. 60Љ 22 1/4Љ 1Љ AW1 F6024 ( ) 640. 66Љ 22 1/4Љ 1Љ AW1 F6624 ( ) 680. 72Љ 22 1/4Љ 1Љ AW1 F7224 ( ) 720. 84Љ 22 1/4Љ 1Љ AW1 F8424 ( ) 799.

30ЉD straight worksurface, flat front 36Љ 28 1/4Љ 1Љ AW1 F3630 ( ) 541. 48Љ 28 1/4Љ 1Љ AW1 F4830 ( ) 615. 60Љ 28 1/4Љ 1Љ AW1 F6030 ( ) 720. 72Љ 28 1/4Љ 1Љ AW1 F7230 ( ) 838. 84Љ 28 1/4Љ 1Љ AW1 F8430 ( ) 962.

Order Code Specification Information Application Notes

Example: AW1 S4830 117 Worksurface edges are trim grey. Worksurfaces may be 24ЉD straight worksurfaces may be AW1 Worksurface end-supported, cantilevered from cantilevered with two cantilever Specify top finish Service Wall, or supported by C-leg brackets. S Straight Veneer finishes for Currents or pedestal at each end. Universal 48 Width worksurfaces are interchangeable 24Љ and 30ЉD straight worksurfaces worksurfaces are available through may be end supported with two 30 Depth Custom Product Development. with Currents desks. Specify supports separately. Currents end support brackets. 117 Top finish Straight worksurfaces have a 1ЉD Universal straight worksurfaces 36Љ curved front for additional surface wide and greater include a steel area, or a flat front. Flat front allows stiffener that doubles as a horizontal two straight worksurfaces to meet at cable manager. right angles. 52 Worksurfaces, universal Currents corner 13/4Љ wire drop description w d h pattern no. lam. 24ЉD both sides corner worksurfaces 42Љ 42Љ 1Љ AW1 C4242 S ( ) $890. 48Љ 48Љ 1Љ AW1 C4848 S ( ) 988. 60Љ 60Љ 1Љ AW1 C6060 S ( ) 1,384.

30ЉD both sides corner worksurfaces 42Љ 42Љ 1Љ AW1 C4242 D ( ) 890. 48Љ 48Љ 1Љ AW1 C4848 D ( ) 988. 60Љ 60Љ 1Љ AW1 C6060 D ( ) 1,384.

30ЉD left/24ЉD right corner worksurfaces 42Љ 42Љ 1Љ AW1 C4242 L ( ) 890. 48Љ 48Љ 1Љ AW1 C4848 L ( ) 988. 60Љ 60Љ 1Љ AW1 C6060 L ( ) 1,384.

24ЉD left/30ЉD right corner worksurfaces 42Љ 42Љ 1Љ AW1 C4242 R ( ) 890. 48Љ 48Љ 1Љ AW1 C4848 R ( ) 988. 60Љ 60Љ 1Љ AW1 C6060 R ( ) 1,384. Worksurfaces

Order Code Specification Information Application Notes

Example: AW1 C4848S 117 Dimensions shown in ‘‘w’’ column Worksurface edges are trim grey. Universal worksurfaces are AW1 Worksurface are nominal width of left back edge. Clear maple laminate is not interchangeable with Currents Dimensions shown in ‘‘d’’ column available on 60w x 60d corner tops. desks. Specify worksurface supports C Corner are nominal width of right back separately. 48 Width left edge. Veneer finishes for Currents Corner worksurfaces may be 48 Width right worksurfaces are available through Worksurface depths: Custom Product Development. supported by two cantilever S Depth left and right S 24ЉD both sides brackets on one back edges in 117 Top finish L 30ЉD left/24ЉD right combination with C-leg or pedestal R 24ЉD left/30ЉD right support on other end. D 30ЉD both sides Universal corner worksurfaces include a steel stiffener on both Specify top finish. back edges that doubles as a horizontal cable manager. 53 Worksurfaces, universal Currents extended corner 13/4Љ wire drop extended left description w d h pattern no. lam. 24ЉD both sides corner worksurfaces, extended 60Љ 36Љ 1Љ AW1 C6036 S ( ) $988. left 60Љ 42Љ 1Љ AW1 C6042 S ( ) 1,090. 60Љ 48Љ 1Љ AW1 C6048 S ( ) 1,187. 72Љ 36Љ 1Љ AW1 C7236 S ( ) 1,187. 72Љ 42Љ 1Љ AW1 C7242 S ( ) 1,282. 72Љ 48Љ 1Љ AW1 C7248 S ( ) 1,384. 84Љ 36Љ 1Љ AW1 C8436 S ( ) 1,384. 84Љ 42Љ 1Љ AW1 C8442 S ( ) 1,483. 84Љ 48Љ 1Љ AW1 C8448 S ( ) 1,583.

30ЉD both sides corner worksurfaces, extended 60Љ 48Љ 1Љ AW1 C6048 D ( ) 1,285. left 72Љ 48Љ 1Љ AW1 C7248 D ( ) 1,483. 84Љ 48Љ 1Љ AW1 C8448 D ( ) 1,681.

30ЉD left/24ЉD right corner worksurfaces, 60Љ 42Љ 1Љ AW1 C6042 L ( ) 1,187. extended left 60Љ 48Љ 1Љ AW1 C6048 L ( ) 1,285. 72Љ 42Љ 1Љ AW1 C7242 L ( ) 1,384. 72Љ 48Љ 1Љ AW1 C7248 L ( ) 1,483. 84Љ 42Љ 1Љ AW1 C8442 L ( ) 1,583. 84Љ 48Љ 1Љ AW1 C8448 L ( ) 1,681.

24ЉD left/30ЉD right corner worksurfaces, 60Љ 42Љ 1Љ AW1 C6042 R ( ) 1,187. extended left 60Љ 48Љ 1Љ AW1 C6048 R ( ) 1,285. 72Љ 42Љ 1Љ AW1 C7242 R ( ) 1,384. 72Љ 48Љ 1Љ AW1 C7248 R ( ) 1,483. 84Љ 42Љ 1Љ AW1 C8442 R ( ) 1,583. 84Љ 48Љ 1Љ AW1 C8448 R ( ) 1,681.

Order Code Specification Information Application Notes

Example: AW1 C6036S 117 Dimensions shown in ‘‘w’’ column Worksurface edges are trim grey. Universal worksurfaces are AW1 Worksurface are nominal width of left back edge. interchangeable with Currents Dimensions shown in ‘‘d’’ column Veneer finishes for Currents desks. Specify worksurface supports C Corner are nominal width of right back worksurfaces are available through separately. 60 Width left edge. Custom Product Development. Corner worksurfaces may be 36 Width right Worksurface depths: supported by two cantilever S Depth left and right S 24ЉD both sides brackets on one back edge in 117 Top finish L 30ЉD left/24ЉD right combination with C-leg or pedestal R 24ЉD left/30ЉD right support on other end. D 30ЉD both sides Universal extended corner worksurfaces include a steel Specify top finish. stiffener on both back edges that doubles as a horizontal cable manager. 54 Worksurfaces, universal Currents extended corner 13/4Љ wire drop extended right description w d h pattern no. lam. 24ЉD both sides corner worksurfaces, extended 36Љ 60Љ 1Љ AW1 C3660 S ( ) $988. right 36Љ 72Љ 1Љ AW1 C3672 S ( ) 1,187. 36Љ 84Љ 1Љ AW1 C3684 S ( ) 1,384. 42Љ 60Љ 1Љ AW1 C4260 S ( ) 1,090. 42Љ 72Љ 1Љ AW1 C4272 S ( ) 1,282. 42Љ 84Љ 1Љ AW1 C4284 S ( ) 1,483. 48Љ 60Љ 1Љ AW1 C4860 S ( ) 1,187. 48Љ 72Љ 1Љ AW1 C4872 S ( ) 1,384. 48Љ 84Љ 1Љ AW1 C4884 S ( ) 1,583.

30ЉD both sides corner worksurfaces, extended 48Љ 60Љ 1Љ AW1 C4860 D ( ) 1,285. right 48Љ 72Љ 1Љ AW1 C4872 D ( ) 1,483. 48Љ 84Љ 1Љ AW1 C4884 D ( ) 1,681.

24ЉD left/30ЉD right corner worksurfaces, 42Љ 60Љ 1Љ AW1 C4260 R ( ) 1,187. extended right 42Љ 72Љ 1Љ AW1 C4272 R ( ) 1,384. 42Љ 84Љ 1Љ AW1 C4284 R ( ) 1,583. 48Љ 60Љ 1Љ AW1 C4860 R ( ) 1,285. 48Љ 72Љ 1Љ AW1 C4872 R ( ) 1,483. 48Љ 84Љ 1Љ AW1 C4884 R ( ) 1,681.

30ЉD left/24ЉD right corner worksurfaces, 42Љ 60Љ 1Љ AW1 C4260 L ( ) 1,187. extended right 42Љ 72Љ 1Љ AW1 C4272 L ( ) 1,384. 42Љ 84Љ 1Љ AW1 C4284 L ( ) 1,583. 48Љ 60Љ 1Љ AW1 C4860 L ( ) 1,285. Worksurfaces 48Љ 72Љ 1Љ AW1 C4872 L ( ) 1,483. 48Љ 84Љ 1Љ AW1 C4884 L ( ) 1,681.

Order Code Specification Information Application Notes

Example: AW1 C3660S 117 Dimensions shown in ‘‘w’’ column Worksurface edges are trim grey. Universal worksurfaces are AW1 Worksurface are nominal width of left back edge. interchangeable with Currents Dimensions shown in ‘‘d’’ column Veneer finishes for Currents desks. Specify worksurface supports C Corner are nominal width of right back worksurfaces are available through separately. 36 Width left edge. Custom Product Development. Corner worksurfaces may be 60 Width right Worksurface depths: supported by two cantilever S Depth left and right S 24ЉD both sides brackets on one back edge in 117 Top finish L 30ЉD left/24ЉD right combination with C-leg or pedestal R 24ЉD left/30ЉD right support on other end. D 30ЉD both sides Universal extended corner worksurfaces include a steel Specify top finish. stiffener on both back edges that doubles as a horizontal cable manager.

55 Worksurfaces, universal Currents P-shape 13/4Љ wire drop description w d h pattern no. lam. P-shape surfaces, extended left 75Љ 48Љ 1Љ AW1 P7548 S ( ) $1,583. 87Љ 48Љ 1Љ AW1 P8748 S ( ) 1,781.

P-shape surfaces, extended right 48Љ 75Љ 1Љ AW1 P4875 S ( ) 1,583. 48Љ 87Љ 1Љ AW1 P4887 S ( ) 1,781.

Order Code Specification Information Application Notes

Example: AW1 P7548S 117 Dimensions shown in ‘‘w’’ column Worksurface edges are trim grey. P-shape worksurfaces may be AW1 Worksurface are nominal width of left back edge. cantilevered from service wall along Dimensions shown in ‘‘d’’ column Veneer finishes for Currents 48Љedge, and supported by 24ЉD P P-shape are nominal width of right back worksurfaces are available through C-leg at conference end. Specify two 75 Width left edge. Custom Product Development. cantilever brackets and C-leg separately. 48 Width right Specify top finish. S Depth of return All P-shape worksurfaces 117 Top finish correspond to a 24ЉD adjacent straight or corner worksurface. Universal P-shape worksurfaces include a steel stiffener on both back edges that doubles as a horizontal cable manager. 56 Worksurfaces, universal Currents shared and arc-shape 13/4Љ wire drop description w d h pattern no. lam. 36ЉD shared worksurface 36Љ 72Љ 1Љ AW1 R7236 ( ) $1,306.

36ЉD left, 24ЉD right arc shape surface 60Љ 34 1/4Љ 1Љ AW1 A60L ( ) 1,091. 72Љ 34 1/4Љ 1Љ AW1 A72L ( ) 1,306.

36ЉD right, 24ЉD left arc shape surface 60Љ 34 1/4Љ 1Љ AW1 A60R ( ) 1,091. 72Љ 34 1/4Љ 1Љ AW1 A72R ( ) 1,306. Worksurfaces

Order Code Specification Information Application Notes

Example: AW1 P7548S 117 Specify top finish. Worksurface edges are trim grey. 36ЉD shared worksurface requires AW1 Worksurface two straight legs and two end Veneer finishes for Currents support brackets, or four straight P P-shape worksurfaces are available through legs. 75 Width left Custom Product Development. Arc shape worksurfaces require 48 Width right 18ЉD floorstanding pedestal or 24ЉD S Depth of return C-leg at 24ЉD end and two end 117 Top finish support brackets or straight legs at 36ЉD end. Universal shared and arc-shape worksurfaces include a steel stiffener that doubles as a horizontal cable manager. 57 Currents Stiffeners Currents stiffeners

description type w d h pattern no. price

Stiffener for worksurfaces 36Љ 20Љ 1 1/2Љ 1Љ AWM1 S36 $83. 42Љ 26Љ 1 1/2Љ 1Љ AWM1 S42 89. 48Љ 32Љ 1 1/2Љ 1Љ AWM1 S48 91. 60Љ 44Љ 1 1/2Љ 1Љ AWM1 S60 93. 66Љ 50Љ 1 1/2Љ 1Љ AWM1 S66 97. 72Љ 56Љ 1 1/2Љ 1Љ AWM1 S72 102. 78Љ 62Љ 1 1/2Љ 1Љ AWM1 S78 107. 84Љ 68Љ 1 1/2Љ 1Љ AWM1 S84 109.

Order Code Specification Information Application Notes

Example: AWM1 S36 Stiffeners are black painted finish. Currents worksurfaces require AWM1 Stiffener stiffeners when the span between structural supports (end supports, S Straight cantilevers, pedestals, or C-legs) 36 Application exceeds 36Љ. Stiffener also serves as horizontal cable manager. Stiffener corresponds in width to straight or corner worksurface back edge. For 90Љ application span, use AWM1-S84 stiffener. Stiffener mounts 18Љ from front edge of worksurface and will interfere with mobile or floorstanding pedestals greater than 18Љ deep. To accommodate a floorstanding pedestal greater than 18Љ deep at one end of worksurface, specify stiffener for 12Љ narrower worksurface. To accommodate two floorstanding pedestals or double-wide at one end of worksurface, specify stiffener for 24Љ narrower worksurface. 58 Cascade edge worksurfaces Currents Rectangular

description w d h pattern no. Solid Woodgrain

24ЉD Rectangular 24Љ 24Љ 1 1/8Љ ACE1R2424N $285. $326. 30Љ 24Љ 1 1/8Љ ACE1R3024N 326. 375. 36Љ 24Љ 1 1/8Љ ACE1R3624N 358. 414. 42Љ 24Љ 1 1/8Љ ACE1R4224N 414. 477. 48Љ 24Љ 1 1/8Љ ACE1R4824N 465. 534. 54Љ 24Љ 1 1/8Љ ACE1R5424N 500. 574. 60Љ 24Љ 1 1/8Љ ACE1R6024N 543. 624. 66Љ 24Љ 1 1/8Љ ACE1R6624N 587. 671. 72Љ 24Љ 1 1/8Љ ACE1R7224N 612. 704. 78Љ 24Љ 1 1/8Љ ACE1R7824N 659. 757. 84Љ 24Љ 1 1/8Љ ACE1R8424N 697. 799. 90Љ 24Љ 1 1/8Љ ACE1R9024N 784. 901. 96Љ 24Љ 1 1/8Љ ACE1R9624N 857. 984.

30ЉD Rectangular 24Љ 30Љ 1 1/8Љ ACE1R2430N 359. 416. 30Љ 30Љ 1 1/8Љ ACE1R3030N 405. 465. 36Љ 30Љ 1 1/8Љ ACE1R3630N 452. 518. 42Љ 30Љ 1 1/8Љ ACE1R4230N 490. 561. 48Љ 30Љ 1 1/8Љ ACE1R4830N 543. 624. 54Љ 30Љ 1 1/8Љ ACE1R5430N 613. 706. 60Љ 30Љ 1 1/8Љ ACE1R6030N 674. 775. 66Љ 30Љ 1 1/8Љ ACE1R6630N 753. 866. 72Љ 30Љ 1 1/8Љ ACE1R7230N 784. 901. 78Љ 30Љ 1 1/8Љ ACE1R7830N 836. 961. 84Љ 30Љ 1 1/8Љ ACE1R8430N 889. 1,023. Worksurfaces 90Љ 30Љ 1 1/8Љ ACE1R9030N 956. 1,101. 96Љ 30Љ 1 1/8Љ ACE1R9630N 1,023. 1,175.

Order Code Specification Information Application Notes

Example: ACE1 R4824N 118 Specify: Cascade Edge worksurfaces are Cascade Edge worksurfaces are not ACE1 Cascade edge Grommet / No grommet. wrapped with a 3D laminate sheet interchangeable with Currents worksurface Replace the ‘‘N’’ suffix from the heated and pressed around an desks surfaces and should not be pattern number with ‘‘G’’. Add FSC-certified substrate. 3D used to create freestanding Currents R Rectangular $20. laminate is more susceptible to desks. Worksurfaces are 1/16Љ less 48 Width denting, impact, tearing and than nominal width and 3/8Љ less than Available finishes: 24 Depth marring than conventional nominal depth for rear wire Solid: high-pressure laminate and should clearance. Edge grommets are N No grommet be handled with care. Do not drag centered at rear edges of 118 Top finish 114 Folkstone Grey worksurfaces across any flooring worksurface for maximum clearance 117 Soft Grey surface. Treat Cascade Edge of 1 3/8Љ. 118 Bright White worksurfaces like veneer 119 Pumice worksurfaces for optimum Worksurfaces require support every performance under normal 48Љ in width. All supporting Woodgrain: conditions. Cascade Edge hardware is ordered separately. 124 Medium Cherry worksurfaces have a 10 year Worksurfaces may be supported at 125 Natural Maple warranty on defects in workmanship each end by pedestals or end 126 Natural Cherry and materials. This warranty does support ‘‘EC’’ brackets and 127 Walnut not cover damage occurring during cantilever brackets matching the or after installation. Cascade edge worksurface depth. 24ЉD worksurfaces in solid colors utilize a rectangular worksurfaces may also non-PVC construction and are also be cantilevered from the Currents free of any plasticizers, phthalates service wall. Panel supported and lead content. worksurfaces over 48Љ must be Cascade Edge worksurfaces are not mid-span supported by cantilever drilled for stiffeners, pedestals or brackets, specified separately. brackets. Cascade Edge worksurfaces are sized for panel-based applications and may be end support from the Currents wall. 24Љ D straight tops may also be cantilevered from the Service Wall. 59 Cascade edge worksurfaces Currents Curvilinear corner

description A B C h pattern no. Solid Woodgrain

Curvilinear corner 36Љ 24Љ 24Љ 1 1/8Љ ACE1L3636SSN $708. $816. 42Љ 24Љ 24Љ 1 1/8Љ ACE1L4242SSN 857. 984. 42Љ 24Љ 30Љ 1 1/8Љ ACE1L4242SDN 1,016. 1,167. 42Љ 30Љ 24Љ 1 1/8Љ ACE1L4242DSN 1,016. 1,167. 48Љ 24Љ 24Љ 1 1/8Љ ACE1L4848SSN 961. 1,106. 48Љ 24Љ 30Љ 1 1/8Љ ACE1L4848SDN 1,153. 1,325. 48Љ 30Љ 24Љ 1 1/8Љ ACE1L4848DSN 1,153. 1,325. 48Љ 30Љ 30Љ 1 1/8Љ ACE1L4848DDN 1,033. 1,187.

Order Code Specification Information Application Notes

Example: ACE1 L4848SSG 114 Specify: Cascade Edge worksurfaces are Cascade Edge worksurfaces are not ACE1 Cascade edge Grommet / No grommet. wrapped with a 3D laminate sheet interchangeable with Currents worksurface Replace the ‘‘N’’ suffix from the heated and pressed around an desks surfaces and should not be pattern number with ‘‘G’’. Add $40. FSC-certified substrate. 3D used to create freestanding Currents L Curvilinear ‘‘L’’ top laminate is more susceptible to desks. Worksurfaces are 1/16Љ less 48 Width left Available finishes: denting, impact, tearing and than nominal width and 3/8Љ less than 48 Width right Solid: marring than conventional nominal depth for rear wire high-pressure laminate and should clearance. Edge grommets are S 24Љ depth left side 114 Folkstone Grey be handled with care. Do not drag centered at rear edges of S 24Љ depth right side 117 Soft Grey worksurfaces across any flooring worksurface for maximum clearance 118 Bright White 3 G Grommets surface. Treat Cascade Edge of 1 /8Љ. 119 Pumice worksurfaces like veneer 114 Top finish worksurfaces for optimum Worksurfaces require support every Woodgrain: performance under normal 48Љ in width. All supporting 124 Medium Cherry conditions. Cascade Edge hardware is ordered separately. 125 Natural Maple worksurfaces have a 10 year Worksurfaces may be supported by 126 Natural Cherry warranty on defects in workmanship left or right hand 18Љ cantilever 127 Walnut and materials. This warranty does bracket at the rear corner, and not cover damage occurring during cantilever bridging brackets on each Note: When wood grain or brushed or after installation. Cascade edge side edge. Worksurfaces may also be finishes are specified on Cascade worksurfaces in solid colors utilize a end supported or cantilever-bracket corner worksurfaces with two ‘‘A’’ non-PVC construction and are also supported from Currents wall. sides of equal length that do not free of any plasticizers, phthalates Extended side of blended L may exceed 42Љ you must select one of and lead content. also be supported with Currents three grain direction options. Insert C-legs. the desired grain direction ‘‘L’’= Left hand, ‘‘R’’= Right hand or ‘‘D’’= Cascade Edge worksurfaces are not Panel supported worksurfaces over Diagonal after the worksurface drilled for stiffeners, pedestals or 48Љ must be mid-span supported by finish code to indicate the brackets. Cascade Edge cantilever brackets, specified appropriate grain direction. When worksurfaces are sized for separately. the ‘‘D’’ option is selected please panel-based applications and may add $25.00 to the worksurface list be supported end support from the price. 48Љ Cascade corners are not Currents wall. 24Љ D straight tops available with a diagonal grain may also be cantilevered from the option. Service Wall.

60 Cascade edge worksurfaces Currents Blended ‘‘L’’

description B C A D h pattern no. Solid Woodgrain

Blended ‘‘L’’ 42Љ 60Љ 24Љ 24Љ 1 1/8Љ ACE1L4260SSN $1,175. $1,352. 42Љ 66Љ 24Љ 24Љ 1 1/8Љ ACE1L4266SSN 1,206. 1,388. 42Љ 72Љ 24Љ 24Љ 1 1/8Љ ACE1L4272SSN 1,250. 1,440. 42Љ 78Љ 24Љ 24Љ 1 1/8Љ ACE1L4278SSN 1,267. 1,454. 48Љ 60Љ 24Љ 24Љ 1 1/8Љ ACE1L4860SSN 1,189. 1,368. 48Љ 60Љ 24Љ 30Љ 1 1/8Љ ACE1L4860SDN 1,167. 1,343. 48Љ 60Љ 30Љ 24Љ 1 1/8Љ ACE1L4860DSN 1,167. 1,343. 48Љ 66Љ 24Љ 24Љ 1 1/8Љ ACE1L4866SSN 1,233. 1,417. 48Љ 66Љ 24Љ 30Љ 1 1/8Љ ACE1L4866SDN 1,228. 1,414. 48Љ 66Љ 30Љ 24Љ 1 1/8Љ ACE1L4866DSN 1,228. 1,414. 48Љ 72Љ 24Љ 24Љ 1 1/8Љ ACE1L4872SSN 1,278. 1,469. 48Љ 72Љ 24Љ 30Љ 1 1/8Љ ACE1L4872SDN 1,284. 1,480. 48Љ 72Љ 30Љ 24Љ 1 1/8Љ ACE1L4872DSN 1,284. 1,480. 48Љ 78Љ 24Љ 24Љ 1 1/8Љ ACE1L4878SSN 1,409. 1,621. 48Љ 84Љ 24Љ 24Љ 1 1/8Љ ACE1L4884SSN 1,584. 1,823. 60Љ 42Љ 24Љ 24Љ 1 1/8Љ ACE1L6042SSN 1,175. 1,352. 60Љ 48Љ 24Љ 24Љ 1 1/8Љ ACE1L6048SSN 1,189. 1,368. Worksurfaces

Order Code Specification Information Application Notes

Example: ACE1 L4260SSN 114 Specify: Cascade Edge worksurfaces are Cascade Edge worksurfaces are not ACE1 Cascade edge Grommet / No grommet. wrapped with a 3D laminate sheet interchangeable with Currents worksurface Replace the ‘‘N’’ suffix from the heated and pressed around an desks surfaces and should not be pattern number with ‘‘G’’. Add $40. FSC-certified substrate. 3D used to create freestanding Currents L Blended ‘‘L’’ top laminate is more susceptible to desks. Worksurfaces are 1/16Љ less 42 Width Available finishes: denting, impact, tearing and than nominal width and 3/8Љ less than 60 Depth Solid: marring than conventional nominal depth for rear wire high-pressure laminate and should clearance. Edge grommets are S 24Љd, left side 114 Folkstone Grey be handled with care. Do not drag centered at rear edges of S 24Љd, right side 117 Soft Grey worksurfaces across any flooring worksurface for maximum clearance 118 Bright White 3 N No Grommet surface. Treat Cascade Edge of 1 /8Љ. 119 Pumice worksurfaces like veneer 114 Top finish worksurfaces for optimum Worksurfaces require support every Woodgrain: performance under normal 48Љ in width. All supporting 124 Medium Cherry conditions. Cascade Edge hardware is ordered separately. 125 Natural Maple worksurfaces have a 10 year Worksurfaces may be supported by 126 Natural Cherry warranty on defects in workmanship left or right hand 18Љ cantilever 127 Walnut and materials. This warranty does bracket at the rear corner, and not cover damage occurring during cantilever bridging brackets on each or after installation. Cascade edge side edge. Worksurfaces may also be worksurfaces in solid colors utilize a end supported or cantilever-bracket non-PVC construction and are also supported from Currents wall. free of any plasticizers, phthalates Extended side of blended L may and lead content. also be supported with Currents C-legs. Panel supported Cascade Edge worksurfaces are not worksurfaces over 48Љ must be drilled for stiffeners, pedestals or mid-span supported by cantilever brackets. Cascade Edge brackets, specified separately. worksurfaces are sized for panel-based applications and may be end support from the Currents wall. 24Љ D straight tops may also be cantilevered from the Service Wall. 61 Cascade edge worksurfaces Currents Blended ‘‘L’’

description B C A D h pattern no. Solid Woodgrain

Blended ‘‘L’’ 60Љ 48Љ 24Љ 30Љ 1 1/8Љ ACE1L6048SDN $1,167. $1,343. 60Љ 48Љ 30Љ 24Љ 1 1/8Љ ACE1L6048DSN 1,167. 1,343. 66Љ 42Љ 24Љ 24Љ 1 1/8Љ ACE1L6642SSN 1,206. 1,388. 66Љ 48Љ 24Љ 24Љ 1 1/8Љ ACE1L6648SSN 1,233. 1,417. 66Љ 48Љ 24Љ 30Љ 1 1/8Љ ACE1L6648SDN 1,228. 1,414. 66Љ 48Љ 30Љ 24Љ 1 1/8Љ ACE1L6648DSN 1,228. 1,414. 72Љ 42Љ 24Љ 24Љ 1 1/8Љ ACE1L7242SSN 1,250. 1,440. 72Љ 48Љ 24Љ 24Љ 1 1/8Љ ACE1L7248SSN 1,278. 1,469. 72Љ 48Љ 24Љ 30Љ 1 1/8Љ ACE1L7248SDN 1,284. 1,480. 72Љ 48Љ 30Љ 24Љ 1 1/8Љ ACE1L7248DSN 1,284. 1,480. 78Љ 42Љ 24Љ 24Љ 1 1/8Љ ACE1L7842SSN 1,267. 1,454. 78Љ 48Љ 24Љ 24Љ 1 1/8Љ ACE1L7848SSN 1,409. 1,621. 84Љ 48Љ 24Љ 24Љ 1 1/8Љ ACE1L8448SSN 1,584. 1,823.

Order Code Specification Information Application Notes

Example: ACE1 L4260SSN 114 Specify: Cascade Edge worksurfaces are Cascade Edge worksurfaces are not ACE1 Cascade edge Grommet / No grommet. wrapped with a 3D laminate sheet interchangeable with Currents worksurface Replace the ‘‘N’’ suffix from the heated and pressed around an desks surfaces and should not be pattern number with ‘‘G’’. Add $40. FSC-certified substrate. 3D used to create freestanding Currents L Blended ‘‘L’’ top laminate is more susceptible to desks. Worksurfaces are 1/16Љ less 42 Width Available finishes: denting, impact, tearing and than nominal width and 3/8Љ less than 60 Depth Solid: marring than conventional nominal depth for rear wire high-pressure laminate and should clearance. Edge grommets are S 24Љd, left side 114 Folkstone Grey be handled with care. Do not drag centered at rear edges of S 24Љd, right side 117 Soft Grey worksurfaces across any flooring worksurface for maximum clearance 118 Bright White 3 N No Grommet surface. Treat Cascade Edge of 1 /8Љ. 119 Pumice worksurfaces like veneer 114 Top finish worksurfaces for optimum Worksurfaces require support every Woodgrain: performance under normal 48Љ in width. All supporting 124 Medium Cherry conditions. Cascade Edge hardware is ordered separately. 125 Natural Maple worksurfaces have a 10 year Worksurfaces may be supported by 126 Natural Cherry warranty on defects in workmanship left or right hand 18Љ cantilever 127 Walnut and materials. This warranty does bracket at the rear corner, and not cover damage occurring during cantilever bridging brackets on each or after installation. Cascade edge side edge. Worksurfaces may also be worksurfaces in solid colors utilize a end supported or cantilever-bracket non-PVC construction and are also supported from Currents wall. free of any plasticizers, phthalates Extended side of blended L may and lead content. also be supported with Currents C-legs. Panel supported Cascade Edge worksurfaces are not worksurfaces over 48Љ must be drilled for stiffeners, pedestals or mid-span supported by cantilever brackets. Cascade Edge brackets, specified separately. worksurfaces are sized for panel-based applications and may be end support from the Currents wall. 24Љ D straight tops may also be cantilevered from the Service Wall. 62 Cascade edge worksurfaces Currents Half round and corner round

description w d h pattern no. Solid Woodgrain

Half Round 48Љ 18Љ 1 1/8Љ ACE1H4818 $612. $704. 49 1/2Љ 18Љ 1 1/8Љ ACE1H4818P 612. 704. 60Љ 24Љ 1 1/8Љ ACE1H6024 842. 970. 61 1/2Љ 24Љ 1 1/8Љ ACE1H6024P 842. 970.

LH Corner Round 24Љ 24Љ 1 1/8Љ ACE1CR24L 326. 375.

RH Corner Round 24Љ 24Љ 1 1/8Љ ACE1CR24R 326. 375.

Notched Corner Round 24Љ 24Љ 1 1/8Љ ACE1CR24N 326. 375.

Sample 12Љ 12Љ 1 1/8Љ ACE1R1212G 175. 203. Worksurfaces

Order Code Specification Information Application Information

Example: ACE1 H4818P 117 Available finishes: Cascade Edge worksurfaces are Worksurfaces are 1/16Љ less than 3 ACE1 Cascade edge Solid: wrapped with a 3D laminate sheet nominal width and /8Љ less than worksurface 114 Folkstone Grey heated and pressed around an nominal depth for rear wire FSC-certified substrate. 3D clearance. Edge grommets are H Half round 117 Soft Grey 118 Bright White laminate is more susceptible to centered at rear edges of 48 Width denting, impact, tearing and worksurface for maximum clearance 119 Pumice 3 18 Depth marring than conventional of 1 /8Љ. Woodgrain: high-pressure laminate and should P Notched for panel be handled with care. Do not drag Worksurfaces require support every 117 Top finish 124 Medium Cherry worksurfaces across any flooring 48Љ in width. All supporting 125 Natural Maple surface. Treat Cascade Edge hardware is ordered separately. 126 Natural Cherry worksurfaces like veneer 127 Walnut Half round worksurfaces for optimum Half round worksurfaces may be performance under normal supported by cantilever bridging conditions. Cascade Edge brackets in conjunction with a worksurfaces have a 10 year rounded end support column. warranty on defects in workmanship and materials. This warranty does Corner round not cover damage occurring during Notched corner round worksurfaces or after installation. Cascade edge are supported by cantilever briding worksurfaces in solid colors utilize a brackets on both side edges. non-PVC construction and are also End run Left- and Right-hand free of any plasticizers, phthalates corner round worksurfaces are and lead content. supported by a combination of an ‘‘EC’’ end bracket along the panel Cascade Edge worksurfaces are not edge and a cantilever bridging drilled for stiffeners, pedestals or bracket to the adjacent worksurface brackets. Cascade Edge side edge. worksurfaces are sized for panel-based applications and may be end support from the Currents wall. 24Љ D straight tops may also be cantilevered from the Service Wall. Cascade Edge worksurfaces are not interchangeable with Currents desks surfaces and should not be used to create freestanding Currents desks. 63 Cascade edge worksurfaces Currents Wave end

description 1 2 3 A B h pattern no. Solid Woodgrain

Wave End, LH 36Љ 24Љ 30Љ 15Љ 3Љ 1 1/8Љ ACE1W363024N $762. $875. 42Љ 24Љ 30Љ 15Љ 9Љ 1 1/8Љ ACE1W423024N 800. 921. 48Љ 24Љ 30Љ 15Љ 15Љ 1 1/8Љ ACE1W483024N 858. 986. 72Љ 24Љ 30Љ 23 1/2Љ 30 1/2Љ 1 1/8Љ ACE1W723024N 1,091. 1,253.

Wave End, RH 36Љ 30Љ 24Љ 3Љ 15Љ 1 1/8Љ ACE1W362430N 762. 875. 42Љ 30Љ 24Љ 9Љ 15Љ 1 1/8Љ ACE1W422430N 800. 921. 48Љ 30Љ 24Љ 15Љ 15Љ 1 1/8Љ ACE1W482430N 858. 986. 72Љ 30Љ 24Љ 23 1/2Љ 30 1/2Љ 1 1/8Љ ACE1W722430N 1,091. 1,253.

Order Code Specification Information Application Notes

Example: ACE1W483024N 118 Specify: Cascade Edge worksurfaces are Cascade Edge worksurfaces are not ACE1 Cascade edge Grommet / No grommet. wrapped with a 3D laminate sheet interchangeable with Currents worksurface Replace the ‘‘N’’ suffix from the heated and pressed around an desks surfaces and should not be pattern number with ‘‘G’’. Add $20. FSC-certified substrate. 3D used to create freestanding Currents W Wave end laminate is more susceptible to desks. Worksurfaces are 1/16Љ less 48 Width Available finishes: denting, impact, tearing and than nominal width and 3/8Љ less than Solid: 30 Depth, right side marring than conventional nominal depth for rear wire 114 Folkstone Grey high-pressure laminate and should clearance. Edge grommets are 24 Depth, left side 117 Soft Grey be handled with care. Do not drag centered at rear edge of worksurface N No grommet 118 Bright White worksurfaces across any flooring for maximum clearance of 1 3/8Љ. 118 Top finish 119 Pumice surface. Treat Cascade Edge worksurfaces like veneer Worksurfaces require support every Woodgrain: worksurfaces for optimum 48Љ in width. All supporting hardware is ordered separately. 124 Medium Cherry performance under normal 125 Natural Maple conditions. Cascade Edge Worksurfaces may be supported at 126 Natural Cherry worksurfaces have a 10 year each end by pedestals or end 127 Walnut warranty on defects in workmanship support ‘‘EC’’ brackets and and materials. This warranty does cantilever brackets matching the not cover damage occurring during worksurface depth. Use cantilever or after installation. Cascade edge bridging bracket to join to adjacent worksurfaces in solid colors utilize a worksurface. Panel supported non-PVC construction and are also worksurfaces over 48Љ must be free of any plasticizers, phthalates mid-span supported by cantilever and lead content. brackets, specified separately. Cascade Edge worksurfaces are not drilled for stiffeners, pedestals or brackets. Cascade Edge worksurfaces are sized for panel-based applications and may be end support from the Currents wall. 24Љ D straight tops may also be cantilevered from the Service Wall. 64 Worksurface, samples Currents

description w d h pattern no. L Currents 16Љ 16Љ 1Љ CSAMP1616 ( ) $119.

Original Upstart 16Љ 16Љ 1Љ USAMP1616 ( )( ) 119. Worksurfaces

Order Code Specification Information

Example: CSAMP1616 118 Specify: C Currents Top finish for Currents and Original Upstart worksurface samples. SAMP Worksurface Sample 16 Width Veneer finishes for Currents worksurfaces are available through 16 Depth Custom Product Development. 118 Top finish

65 Worksurface supports Currents Service Wall and Fence-Mounted

description type w d h pattern no. paint Adjustable cantilever bracket (up to 24ЉD) 3Љ 20Љ 23-33Љ AB1 AC24 ( ) $283.

Adjustable cantilever bridging bracket 3Љ 20Љ 23-33Љ AB1-ABC24( ) 367.

Fixed end support bracket 3Љ 6Љ 27Љ AB1 FE ( ) 182.

Adjustable end support bracket 3Љ 6Љ 23-33Љ AB2 AE ( ) 227.

Compact fixed for 28Љh worksurface 6Љ 27Љ AB2 FE27 ( ) 192. end support bracket for 29 5/8Љ h worksurface 6Љ 28Љ AB2 FE28 ( ) 192.

Fence end bracket kit AB1FAE ( ) 279.

Order Code Specification Information Application Notes

Example: AB1 AC24 117 Specify painted finishes for support Specify worksurface cantilever and Adjustable bridging cantilever AB1 Bracket column, C-leg, and brackets. end support brackets to attach supports adjacent 48ЉW straight or worksurfaces to Service Walls. corner worksurfaces. AC Type Fence end bracket kit includes a 24 Depth left and a right handed bracket. Specify two cantilever brackets to End support brackets adjust support any 24ЉD Currents, Reff, 23Љ-33ЉH (24Љ to 34Љ top height). 117 Finish Specify paint finish for end bracket. Equity, Dividends, or Cascade Fixed height brackets support worksurface up to 84Љ wide, or one worksurface at 28ЉH and 29 5/8Љ H. back edge of corner worksurface. Specify three cantilever brackets to Fence end brackets attach to Fence support any 24ЉD Currents, Reff, to support one end of rectilinear or Equity, Dividends or Cascade one back edge of a corner worksurface greater than 84Љ wide. worksurface when the other ends are Specify two end support brackets to properly supported by legs, storage support one end of straight, or panel brackets. conference, or arc-shape surface. Fence end brackets support the Adjustable height cantilever and underside of the worksurface in 1Љ bridging cantilever brackets support increments from 26Љ to 28Љ (27Љ to underside of worksurface in 1Љ 29Љ top height). increments from 23Љ to 33ЉH (24Љ to 34Љ top height). 66 Pedestal accessories Currents cushion fabric

COM Description type w d pattern no. A BCDEFGHI Cushion Deep 15Љ 23Љ AS1 DPAD ( ) $313. $350. $411. $430. $472. $513. $567. $626. $649. Standard 15Љ 17Љ AS1 SPAD ( ) 254. 293. 334. 350. 374. 411. 449. 513. 529. Floorstanding storage

Order Code Specification Information Application Notes

Example: AS1 SPAD There is a $79 upcharge on CAL133 Pedestal cushions are for use on For Customers Own Material (COM) AS1 Pedestal backing on the cushion. Currents open top mobile pedestals applications, specify .75 yards of as well as on open top mobile fabric for 17 inch deep mobile S Depth Pedestal cushions are upholstered pedestals in other Knoll systems pedestal seat cushions, and .90 PAD Cushion (from the front to the back of the lines. yards for 23 inch deep seat cushion. pedestal) with the fabric direction matching the textile sample.

67 Pedestal accessories Currents cushion leather

COL Description type w d pattern no. UVWXY Cushion Deep 15Љ 23Љ AS1 DPAD ( ) $626. $747. $919. $963. $1,016. Standard 15Љ 17Љ AS1 SPAD ( ) 490. 588. 723. 747. 783.

Order Code Specification Information Application Notes

Example: AS1 SPAD There is a $108 upcharge for Pedestal cushions are for use on For Customers Own Leather (COL) AS1 Pedestal perforated leather. Currents open top mobile pedestals applications, specify 11.5 sq. feet of as well as on open top mobile leather for 17 inch deep mobile S Depth pedestals in other Knoll systems pedestal seat cushions, and 14.5 sq. PAD Cushion lines. feet for 23 inch deep seat cushion.

68 Counter surface Currents

description w d h pattern no. lam. paint Counter surface 36Љ 12Љ 1Љ AW1 CS3612 ( ) $358. 48Љ 12Љ 1Љ AW1 CS4812 ( ) 400. 60Љ 12Љ 1Љ AW1 CS6012 ( ) 439. 72Љ 12Љ 1Љ AW1 CS7212 ( ) 481.

Counter surface bracket kit AB1 CS ( ) 358. Counter Surface

69 Upstart Tables Currents primary worksurfaces table desks ‘‘Limited AvailabilityЉ type application w d h pattern no. list price Y-shape table desk, curved end (left hand shown) left 72Љ 28-36Љ 25-30Љ AUP Y72DCL4 ( )( )( )( ) $1,297. right 72Љ 28-36Љ 25-30Љ AUP Y72DCR4 ( )( )( )( ) 1,297.

M-shape table desk, curved ends 72Љ 30-36Љ 25-30Љ AUP M72DC4 ( )( )( )( ) 1,297.

Y-shape table desk, flat ends left 72Љ 28-36Љ 25-30Љ AUP Y72DFL4 ( )( )( )( ) 1,297. right 72Љ 28-36Љ 25-30Љ AUP Y72DFR4 ( )( )( )( ) 1,297.

M-shape table desk, flat ends 72Љ 31-36Љ 25-30Љ AUP M72DF4 ( )( )( )( ) 1,297.

Order Code Specification Information Application Notes

Example: AUP Y72DCL4 117 117 Specify top, edge and leg finishes. Upstart Y and M shape tables Upstart Y and M shape tables 117 G include a worksurface stiffener that combine computer support and A Currents doubles as a horizontal cable adjacent work area in a basic table Casters/glides manager. desk. UP Upstart C Casters Y Table shape Suspended pedestal may not be Curved end tops facilitate G Glides used on Upstart tables. conferencing in open planning. Flat 72 Width ends plan close to system panels. D Depth Overall width is the same for curved C Curved end and flat end tops. L Left hand Upstart tops have plastic laminate 4 Leg quantity surface with continuous T-mold edge. 117 Top finish 117 Edge finish Upstart tables have four legs with 5Љ adjustable leveler glides or 4Љ 117 Leg finish adjustable casters. Adjustment G Glides range is 25-30Љ for glides and 27-31Љ for casters. Adjustment range enables Upstart tables to overlap or slide under adjacent tables and worksurfaces. 70 Upstart Tables Currents primary worksurfaces corner table desks ‘‘Limited AvailabilityЉ type w d h pattern no. list price Extended corner table desk, 90° extended left 72Љ 48Љ 25-30Љ AUP C7248S5 ( )( )( )( ) $1,484.

Extended corner table desk, 90° extended right 48Љ 72Љ 25-30Љ AUP C4872S5 ( )( )( )( ) 1,484.

Corner table desk, 120° 48Љ, 48Љ 22Љ 25-30Љ AUP V48S5 ( )( )( )( ) 1,391.

Order Code Specification Information Application Notes

Example: AUP C7248S5 117 117 Specify top, edge and leg finishes. Upstart extended corner and corner Upstart extended corner and corner 117 C shape tables include worksurface shape tables combine computer A Currents stiffeners that double as horizontal support and adjacent work area in a Casters/glides cable managers.Suspended pedestal basic table desk. UP Upstart C Casters may not be used on Upstart tables. C Table shape Upstart tops have plastic laminate G Glides surface with continuous T-mold 72 Width, extended left edge. 48 Width Upstart tables have four or five legs S Depth with 5Љ adjustable leveler glides or 4 Leg quantity 4Љ adjustable casters. Adjustment 117 Top finish range is 25-30Љ for glides and 27-31Љ for casters. 117 Edge finish 117 Leg finish Adjustment range enables Upstart tables to overlap or slide under C Casters adjacent worksurfaces. Extended corner table desks and 120° corner table desk are 22Љ deep on each side edge. Upstart table desks and storage 71 Upstart Tables Currents secondary worksurfaces ‘‘Limited AvailabilityЉ type w d h pattern no. list price Rectangular table desk, four legs 48Љ 22Љ 25-30Љ AUP S48S4 ( )( )( )( ) $832. 48Љ 28Љ 25-30Љ AUP S48D4 ( )( )( )( ) 930. 60Љ 28Љ 25-30Љ AUP S60D4 ( )( )( )( ) 1,022. 72Љ 28Љ 25-30Љ AUP S72D4 ( )( )( )( ) 1,067. 72Љ 36Љ 25-30Љ AUP S72E4 ( )( )( )( ) 1,113.

Rectangular return, two legs 48Љ 22Љ 25-30Љ AUP S48S2 ( )( )( )G 650.

Order Code Specification Information Application Notes

Example: AUP S72E4 117 117 117 Specify top, edge and leg finishes. Upstart rectangular and rectangular Upstart tops have plastic laminate C return include a worksurface surface with continuous T-mold A Currents Casters/glides stiffener that doubles as a horizontal edge. cable manager. UP Upstart C Casters Upstart tables have four or five legs S Table shape G Glides Suspended pedestals may not be with 5Љ adjustable leveler glides or used on Upstart tables. 4Љ adjustable casters. Adjustment 72 Width range is 25-30Љ for glides and E Depth 27-31Љ for casters. 4 Leg quantity Adjustment range enables Upstart 117 Top finish tables to overlap or slide under 117 Edge finish adjacent worksurfaces. 117 Leg finish Rectangular return with two legs C Casters includes flat bracket for attachment to primary worksurface at right angle.

72 Upstart Tables Currents conference worksurfaces ‘‘Limited AvailabilityЉ type w d h pattern no. list price

Wiper table desk 61Љ 32 1/2Љ 25-30Љ AUP W60D4 ( )( )( )( ) $1,022.

Oval table desk, four legs 66Љ 36Љ 25-30Љ AUP O664 ( )( )( )( ) 1,297.

Round table desk, four legs 42Љ 25-30Љ AUP R424 ( )( )( )( ) 966.

Half round table desk, four legs 62Љ 30Љ 25-30Љ AUP D624( )( )( )( ) 1,022.

Tripod table, three legs 36Љ 36Љ 25-30Љ AUP T363( )( )( )( ) 832.

Order Code Specification Information Application Notes

Example: AUP O664 117 117 117 Specify top, edge and leg finishes. Upstart wiper, oval and half round Upstart conference table desks are G tables include a worksurface designed to support conference A Currents Casters/glides stiffener that doubles as a horizontal work in combination with other cable manager. worktables or systems furniture. UP Upstart C Casters G Glides O Table shape Suspended pedestals may not be Upstart tops have plastic laminate used on Upstart tables. surface with continuous T-mold 66 Size edge. 4 Leg quantity Upstart tables have four legs with 5Љ 117 Top finish adjustable leveler glides or 4Љ 117 Edge finish adjustable casters. Adjustment 117 Leg finish range is 25-30Љ for glides and 27-31Љ for casters. G Glides Tops adjust in height to permit conference tops to overlap or roll under adjacent tables. Half round corresponds to back-to-back Y-shape tables or 30Љ deep straight tables. Upstart table desks and storage 73 Upstart Tables Currents curved leg only ‘‘Limited AvailabilityЉ description h pattern no. Paint

Curved leg with glide 23 7/8Љ - 28 7/8Љ AUPCGV ( ) $135.

Curved leg with caster 25 7/8Љ - 29 7/8Љ AUPCCV ( ) 135.

Order Code Specification Information Application Notes

Example: AUPCC 114 Specify: Each curved Upstart leg comes with A Currents four (4) metal inserts and four (4) Casters/glides screws. UP Upstart C Casters C Curved leg When creating a freestanding table G Glides using Upstart legs, Upstart legs C Casters must be attached using metal 114 Leg finish inserts. Leg finishes, paint See Color Program Page Curved Upstart legs must be positioned in accordance with BIFMA guidelines. Upstart tables have four or five curved legs with 5Љ adjustable leveler glides or 4Љ adjustable casters. Adjustment range is 27Љ - 31Љ for casters and 25Љ - 30Љ for glides. 74 Plannable Upstart Tables Currents Rectangular Table Desk ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

24Љ D 30Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S30S4 ( ) G ( )( )( ) $665. 36Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S36S4 ( ) G ( )( )( ) 702. 42Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S42S4 ( ) G ( )( )( ) 742. 48Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S48S4 ( ) G ( )( )( ) 780. 54Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S54S4 ( ) G ( )( )( ) 815. 60Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S60S4 ( ) G ( )( )( ) 853. 66Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S66S4 ( ) G ( )( )( ) 894. 72Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S72S4 ( ) G ( )( )( ) 932. 84Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S84S4 ( ) G ( )( )( ) 1,005.

30Љ D 30Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S30D4 ( ) G ( )( )( ) 752. 36Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S36D4 ( ) G ( )( )( ) 792. 42Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S42D4 ( ) G ( )( )( ) 829. 48Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S48D4 ( ) ( ) ( )( )( ) 864. 54Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S54D4 ( ) ( ) ( )( )( ) 910. 60Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S60D4 ( ) ( ) ( )( )( ) 951. 66Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S66D4 ( ) ( ) ( )( )( ) 973. 72Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S72D4 ( ) ( ) ( )( )( ) 995. 84Љ 29 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S84D4 ( ) ( ) ( )( )( ) 1,106.

Order Code Specification Information Application Notes

Example: AUPM S72S4 AG 118 Specify: Edge finishes, T-mold Plannable Upstart tops have flat 114 114 See Color Program Page fronts allowing 2 tables to meet at Grommet/No grommet A Currents right angles. A Grommet Leg finishes, paint UP Upstart B No grommet See Color Program Page Plannable Upstart tables have four or five straight legs with 5Љ M Plannable 24Љ deep rectangular table desks Casters/glides adjustable leveler glides or 4Љ S Table Shape can only be ordered with glides. adjustable casters. Adjustment 72 Width C Casters 30Љ deep rectangular table desks in range is 27 3/4Љ - 31 3/4Љ for casters G Glides 30Љ, 36Љ and 42Љ width can only be and 27 3/4Љ - 32 3/4Љ for glides. S Depth ordered with glides. 4 Leg quantity Top finish, plastic laminates Rectangular return with two legs For Veneer Group 1, only black or A Grommet See Color Program Page includes flat bracket for attachment trim grey edgebands can be to primary worksurfaces at right G Glides Veneer Group 1 specified. angle. 118 Top finish See Color Program Page. Veneer Translucent orange, Translucent Plannable Upstart rectangular and 114 Edge finish finishes are available through blue and Frosty white edgebands Custom Product Development. rectangular return include a 114 Leg finish are not available on Plannable worksurface stiffener that doubles Upstart tables. as a horizontal cable manager. Suspended pedestals may not be used on Upstart tables. Upstart table desks and storage 75 Plannable Upstart Tables Currents Rectangular Return ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

24Љ D 36Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S36S2 ( )( )( )( )( ) $530. 42Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S42S2 ( )( )( )( )( ) 568. 48Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S48S2 ( )( )( )( )( ) 605. 60Љ 23 5/8Љ 27 3/4Љ - 32 3/4Љ AUPM S60S2 ( )( )( )( )( ) 731.

Order Code Specification Information Application Notes

Example: AUPM S36S2 AC 118 Specify: Edge finishes, T-mold Plannable Upstart tops have flat 114 114 See Color Program Page fronts allowing 2 tables to meet at Grommet/No grommet A Currents right angles. A Grommet Leg finishes, paint UP Upstart B No grommet See Color Program Page Plannable Upstart tables have four or five straight legs with 5Љ M Plannable For Veneer Group 1, only black or Casters/glides adjustable leveler glides or 4Љ S Table Shape trim grey edgebands can be adjustable casters. Adjustment 36 Width C Casters specified. range is 27 3/4Љ - 31 3/4Љ for casters G Glides 3 3 S Depth Translucent orange, Translucent and 27 /4Љ - 32 /4Љ for glides. 2 Leg quantity Top finish, plastic laminates blue and Frosty white edgebands Rectangular return with two legs are not available on Plannable A Grommet See Color Program Page includes flat bracket for attachment Upstart tables. to primary worksurfaces at right C Casters Veneer Group 1 Suspended pedestals may not be angle. 118 Top finish See Color Program Page. Veneer used on Upstart tables. Plannable Upstart rectangular and 114 Edge finish finishes are available through Custom Product Development. rectangular return include a 114 Leg finish worksurface stiffener that doubles as a horizontal cable manager.

76 Plannable Upstart Tables Currents corner ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

24Љ D both sides corner worksurfaces 42Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C4242S5 ( )( )( )( )( ) $1,139. 48Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C4848S5 ( )( )( )( )( ) 1,231. 60Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C6060S5 ( ) C ( )( )( ) 1,604.

30Љ D both sides corner worksurfaces 42Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C4242D5 ( )( )( )( )( ) 1,203. 48Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C4848D5 ( )( )( )( )( ) 1,295. 60Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C6060D5 ( ) C ( )( )( ) 1,670.

Order Code Specification Information Application Notes

Example: AUPM C4242S5 AC 118 Specify: Edge finishes, T-mold Plannable Upstart tops have flat 114 114 See Color Program Page fronts allowing 2 tables to meet at Grommet/No grommet right angles. A Currents Leg finishes, paint UP Upstart A Grommet See Color Program Page Plannable Upstart tables have four B No grommet M Plannable or five straight legs with 5Љ For Veneer Group 1, only black or adjustable leveler glides or 4Љ C Table Shape Casters/glides trim grey edgebands can be adjustable casters. Adjustment 4242 Width C Casters specified. range is 27 3/4Љ - 31 3/4Љ for casters 3 3 S Depth G Glides Translucent orange, Translucent and 27 /4Љ - 32 /4Љ for glides. 5 Leg quantity blue and Frosty white edgebands Rectangular return with two legs Top finish, plastic laminates are not available on Plannable A Grommet See Color Program Page includes flat bracket for attachment Upstart tables. to primary worksurfaces at right C Casters Veneer Group 1 Suspended pedestals may not be angle. 118 Top finish See Color Program Page. Veneer used on Upstart tables. Plannable Upstart corner and 114 Edge finish finishes are available through extended corner include 114 Leg finish Custom Product Development. worksurface stiffeners that double as horizontal cable managers. Upstart table desks and storage

77 Plannable Upstart Tables Currents extended corner extended left ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

24Љ D both sides corner worksurface, 60Љ 36Љ 27 3/4Љ - 32 3/4Љ AUPM C6036S5 ( )( )( )( )( ) $1,007. extended left 60Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C6042S5 ( )( )( )( )( ) 1,099. 60Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C6048S5 ( ) C ( )( )( ) 1,194. 72Љ 36Љ 27 3/4Љ - 32 3/4Љ AUPM C7236S5 ( )( )( )( )( ) 1,194. 72Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C7242S5 ( ) C ( )( )( ) 1,288. 72Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C7248S5 ( ) C ( )( )( ) 1,384. 84Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C8448S5 ( ) C ( )( )( ) 1,570.

30Љ D both sides corner worksurface, 60Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C6048D5 ( ) C ( )( )( ) 1,289. extended left 72Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C7248D5 ( ) C ( )( )( ) 1,478. 84Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C8448D5 ( ) C ( )( )( ) 1,665.

30Љ D left/24Љ D right corner worksurface, 60Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C6042L5 ( ) C ( )( )( ) 1,194. extended left 60Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C6048L5 ( ) C ( )( )( ) 1,289. 72Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C7242L5 ( ) C ( )( )( ) 1,384. 72Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C7248L5 ( ) C ( )( )( ) 1,478. 84Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C8448L5 ( ) C ( )( )( ) 1,665.

Order Code Specification Information Application Notes

Example: AUPM C7236S5 AC 118 Specify: Edge finishes, T-mold Plannable Upstart tops have flat 114 114 See Color Program Page fronts allowing 2 tables to meet at Grommet/No grommet right angles. A Currents Leg finishes, paint UP Upstart A Grommet See Color Program Page Plannable Upstart tables have four B No grommet M Plannable or five straight legs with 5Љ For Veneer Group 1, only black or adjustable leveler glides or 4Љ C Table Shape Casters/glides trim grey edgebands can be adjustable casters. Adjustment 7236 Width C Casters specified. range is 27 3/4Љ - 31 3/4Љ for casters 3 3 S Depth G Glides Translucent orange, Translucent and 27 /4Љ - 32 /4Љ for glides. 5 Leg quantity blue and Frosty white edgebands Rectangular return with two legs Top finish, plastic laminates are not available on Plannable A Grommet See Color Program Page includes flat bracket for attachment Upstart tables. to primary worksurfaces at right C Casters Veneer Group 1 Suspended pedestals may not be angle. 118 Top finish See Color Program Page. Veneer used on Upstart tables. Plannable Upstart corner and 114 Edge finish finishes are available through extended corner include 114 Leg finish Custom Product Development. worksurface stiffeners that double as horizontal cable managers.

78 Plannable Upstart Tables Currents extended corner extended left ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

24Љ D left/30Љ D right corner worksurface, 60Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C6042R5 ( ) C ( )( )( ) $1,194. extended left 60Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C6048R5 ( ) C ( )( )( ) 1,289. 72Љ 42Љ 27 3/4Љ - 32 3/4Љ AUPM C7242R5 ( ) C ( )( )( ) 1,384. 72Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C7248R5 ( ) C ( )( )( ) 1,478. 84Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM C8448R5 ( ) C ( )( )( ) 1,665.

Order Code Specification Information Application Notes

79 Plannable Upstart Tables Currents extended corner extended right ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

24Љ D both sides corner worksurface, 36Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C3660S5 ( )( )( )( )( ) $1,007. extended right 36Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C3672S5 ( )( )( )( )( ) 1,194. 42Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4260S5 ( )( )( )( )( ) 1,099. 42Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4272S5 ( ) C ( )( )( ) 1,288. 48Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4860S5 ( ) C ( )( )( ) 1,194. 48Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4872S5 ( ) C ( )( )( ) 1,384. 48Љ 84Љ 27 3/4Љ - 32 3/4Љ AUPM C4884S5 ( ) C ( )( )( ) 1,570.

30Љ D both sides corner worksurface, 48Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4860D5 ( ) C ( )( )( ) 1,289. extended right 48Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4872D5 ( ) C ( )( )( ) 1,478. 48Љ 84Љ 27 3/4Љ - 32 3/4Љ AUPM C4884D5 ( ) C ( )( )( ) 1,665.

24Љ D left/30Љ D right corner worksurface, 42Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4260R5 ( ) C ( )( )( ) 1,194. extended right 42Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4272R5 ( ) C ( )( )( ) 1,384. 48Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4860R5 ( ) C ( )( )( ) 1,289. 48Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4872R5 ( ) C ( )( )( ) 1,478. 48Љ 84Љ 27 3/4Љ - 32 3/4Љ AUPM C4884R5 ( ) C ( )( )( ) 1,665.

Order Code Specification Information Application Notes

Example: AUPM C4872S5 AC 118 Specify: Edge finishes, T-mold Plannable Upstart tops have flat 114 114 See Color Program Page fronts allowing 2 tables to meet at Grommet/No grommet right angles. A Currents Leg finishes, paint UP Upstart A Grommet See Color Program Page Plannable Upstart tables have four B No grommet M Plannable or five straight legs with 5Љ For Veneer Group 1, only black or adjustable leveler glides or 4Љ C Table Shape Casters/glides trim grey edgebands can be adjustable casters. Adjustment 4872 Width C Casters specified. range is 27 3/4Љ - 31 3/4Љ for casters 3 3 S Depth G Glides Translucent orange, Translucent and 27 /4Љ - 32 /4Љ for glides. 5 Leg quantity blue and Frosty white edgebands Rectangular return with two legs Top finish, plastic laminates are not available on Plannable A Grommet See Color Program Page includes flat bracket for attachment Upstart tables. to primary worksurfaces at right C Casters Veneer Group 1 Suspended pedestals may not be angle. 118 Top finish See Color Program Page. Veneer used on Upstart tables. Plannable Upstart corner and 114 Edge finish finishes are available through extended corner include 114 Leg finish Custom Product Development. worksurface stiffeners that double as horizontal cable managers.

80 Plannable Upstart Tables Currents extended corner extended right ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

30Љ D left/24Љ D right corner worksurface, 42Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4260L5 ( ) C ( )( )( ) $1,194. extended right 42Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4272L5 ( ) C ( )( )( ) 1,384. 48Љ 60Љ 27 3/4Љ - 32 3/4Љ AUPM C4860L5 ( ) C ( )( )( ) 1,289. 48Љ 72Љ 27 3/4Љ - 32 3/4Љ AUPM C4872L5 ( ) C ( )( )( ) 1,478. 48Љ 84Љ 27 3/4Љ- 32 3/4Љ AUPM C4884L5 ( ) C ( )( )( ) 1,665.

Order Code Specification Information Application Notes

81 Plannable Upstart Tables Currents half round and P-shapes ‘‘Limited AvailabilityЉ description w d h pattern no. lam.

Half round table desk, four legs 59Љ 30Љ 27 3/4Љ - 32 3/4Љ AUPM D594 ( ) G ( )( )( ) $951. 60Љ 30Љ 27 3/4Љ - 32 3/4Љ AUPM D604 ( ) G ( )( )( ) 951.

P-shape surface, extended right 48Љ 75Љ 27 3/4Љ - 32 3/4Љ AUPM P4875S5 ( ) C ( )( )( ) 1,587.

P-shape surface, extended left 75Љ 48Љ 27 3/4Љ - 32 3/4Љ AUPM P7548S5 ( ) C ( )( )( ) 1,587.

Order Code Specification Information Application Notes

Example: AUPM P4875S5 AC 118 Specify: Edge finishes, T-mold Plannable Upstart tops have flat 114 114 See Color Program Page fronts allowing 2 tables to meet at Grommet/No grommet right angles. A Currents Leg finishes, paint UP Upstart A Grommet See Color Program Page Plannable Upstart tables have four B No grommet M Plannable or five straight legs with 5Љ For Veneer Group 1, only black or adjustable leveler glides or 4Љ P Table Shape Casters/glides trim grey edgebands can be adjustable casters. Adjustment 4875 Width C Casters specified. range is 27 3/4Љ - 31 3/4Љ for casters 3 3 S Depth G Glides Translucent orange, Translucent and 27 /4Љ - 32 /4Љ for glides. 5 Leg quantity blue and Frosty white edgebands Rectangular return with two legs Top finish, plastic laminates are not available on Plannable A Grommet See Color Program Page includes flat bracket for attachment Upstart tables. to primary worksurfaces at right C Casters Veneer Group 1 Suspended pedestals may not be angle. 118 Top finish See Color Program Page. Veneer used on Upstart tables. Plannable Upstart half round and 114 Edge finish finishes are available through P-shape tables include worksurface 114 Leg finish Custom Product Development. stiffeners that double as horizontal cable managers.

82 Plannable Upstart Tables Currents straight leg only ‘‘Limited AvailabilityЉ description h pattern no. Paint

Straight leg with glide 26 5/8Љ - 31 5/8Љ AUPM SGV ( ) $135.

Straight leg with caster 26 5/8Љ - 30 5/8Љ AUPM SCV ( ) 135.

Order Code Specification Information Application Notes

Example: AUPM SC 114 Specify: Plannable Upstart straight leg Each straight Plannable Upstart leg A Currents may not be used with Original comes with four (4) metal inserts Casters/glides Upstart tables due to stability and four (4) screws. UP Upstart C Casters issues. M Plannable When creating a freestanding table G Glides using Upstart legs, Upstart legs S Straight leg must be attached using metal C Casters inserts. Leg finishes, paint 114 Leg finish See Color Program Page Straight Plannable Upstart legs must be positioned in accordance with BIFMA guidelines. Plannable Upstart tables have four or five straight legs with 5Љ adjustable leveler glides or 4Љ adjustable casters. Adjustment range is 27 3/4Љ - 31 3/4Љ for casters Upstart table desks and storage and 27 3/4Љ - 32 3/4Љ for glides. 83 Accessories Currents

type w d h pattern no. list price

Flat bracket 3 1/2Љ 14Љ AB1 F24 $48.

Cable tray 20Љ 2Љ 6Љ AR1 CB 188.

Carpet grips (set of 10) MM2-CG 37.

Non skid grips (set of 10) AA1NSK 50.

Lockable caster (set of 4) 2Љ 2Љ 2 1/4Љ AUPLC4 60.

Lockable caster (set of 5) 2Љ 2Љ 2 1/4Љ AUPLC5 79.

Order Code Specification Information Application Notes

Example: AA1-NSK Flat bracket and cable tray are Flat bracket attaches return Carpet grips snap into underside of A Currents black, painted steel. worksurface to primary worksurface Upstart leveling glides for traction at right angle. on carpeted floors. A1 Accessory NSK Non skid grips Cable tray attaches beneath Non-skid grips snap into stiffener under table surface to leveling glides for traction on accommodate transformers or a hard-surface floors. bundle of cable. Locking casters replace standard non-locking casters. 84 Upstart Privacy Screens Currents for Upstart tables ‘‘Limited AvailabilityЉ type application w d h pattern no. list price

Polycarbonate screen, back of table 36Љ 3/4Љ 24Љ AUP B3624RC ( ) $666. 48Љ 3/4Љ 24Љ AUP B4824RC ( ) 760. 60Љ 3/4Љ 24Љ AUP B6024RC ( ) 877. 72Љ 3/4Љ 24Љ AUP B7224RC ( ) 957.

Marker surface screen, back of table 36Љ 3/4Љ 24Љ AUP B3624M ( ) 666. 48Љ 3/4Љ 24Љ AUP B4824M ( ) 760. 60Љ 3/4Љ 24Љ AUP B6024M ( ) 877. 72Љ 3/4Љ 24Љ AUP B7224M ( ) 957.

Magnet rail 36Љ screen 18Љ 1/4Љ 2Љ AUP MR36 ( ) 79. 48Љ screen 30Љ 1/4Љ 2Љ AUP MR48 ( ) 89. 60Љ screen 36Љ 1/4Љ 2Љ AUP MR60 ( ) 97. 72Љ screen 48Љ 1/4Љ 2Љ AUP MR72 ( ) 103.

Order Code Specification Information Application Notes

Example: AUP B7224 RC 117 Specify surface type and painted Upstart screens mount on the back Magnet rails span between screen A Currents finish for screen frame, brackets of Upstart tables to provide partial mounting brackets to hang paper and magnet rail. enclosure above and below documents. UP Upstart worksurface height. B Back of worksurface Surface type: Magnet rails correspond in width to Screens have a translucent, ribbed privacy screens. 72 Width RC Ribbed polycarbonate polycarbonate or marker surface 24 Height M Marker Surface core. Perimeter frame is painted Please refer to Introduction page for table and screen dimensions. RC Polycarbonate steel with trim grey molded corner blocks. 117 Paint finish Screens include brackets that mount to matching holes under Upstart tables of the same width. Bracket holes are also provided for mounting two 36Љ wide screens on a 72Љ wide Upstart table. Screen mounts in two positions, creating enclosure to a height of 39Љ or 48Љ when the table top is adjusted to 28Љ. Screens may be shared between desks in back to back configurations. Upstart table desks and storage 85 Wall Mounting of Knoll Products Currents

Wall Mounting Suggestions The following information is provided only as a guide, and represents minimum recommendations only. Knoll does not accept responsibility for the attachment of any Knoll product to a Customer’s site wall. Wall specification/construction is the responsibility of the Customer and its structural engineer/architect. Failure to properly attach Knoll products to adequate wall structures can lead to property damage and/or personal injury.

You should consult your own structural engineers and/or architects and must not rely on the information provided herein.

It is the responsibility of the Customer and its structural engineers/architects to verify that the permanent structural walls (studs, blocks, solid masonry, etc.) on which the Knoll products are intended to be mounted are designed appropriately to support the product weight, PLUS 3 lbs. per linear inch for each useable shelf length

NOTE: A cabinet’s top is considered a “useable shelf” and MUST be included in the calculation of the total load for an overhead cabinet.

It is the responsibility of the Customer and its structural engineer/architects to specify the fasteners and method for attaching the Knoll supplied wall mounting cleat, bracket, frame, etc. to the supporting wall and to confirm that the installers have adhered to these specifications. For all local building standards and codes, and additional requirements (including, but not limited to, seismic conditions) the Customer should always consult local code agencies.

86 Wall Mounting of Knoll Products Currents

EXISTING CONSTRUCTION

Cinder Block or Wood Stud Wall, the Wood Stud Wall, Steel Stud Wall, Steel Stud Wall, NEW Poured Concrete studs being the studs being only the studs being the studs being only CONSTRUCTION Masonry Wall FULL HEIGHT to the Ceiling Height FULL HEIGHT to the Ceiling Height roof/floor above roof/floor above Stud Wood studs, grade The wall must be a Wood studs must be Wood studs must be Metal studs must be Metal studs must be Specification #2 or better, 3 1/2" minimum of 6" thick, Grade #2, or better, Grade #2, or better, minimum 25 gage minimum 25 gage minimum width, OR and must be full 3 1/2" minimum width 3 1/2" minimum width thickness, 3 5/8" thickness, 3 5/8" Metal studs, minimum height to the roof/ minimum width minimum width 25 gage thickness, 3 floor structure above 5/8" minimum width Stud Metal and wood studs N/A Wood studs must Wood studs must be Metal studs must be Metal studs must be Centers must be spaced at be spaced at 16" c/c spaced at 16"" c/c spaced at 16" c/c spaced at 16" c/c 16" c/c maximum maximum maximum" maximum maximum Stud Metal and wood studs Wood studs must be Metal studs must be Height must extend upwards, braced above the ceiling, braced above the ceiling, and be securely and be securely attached and be securely attached attached to the roof/ to the roof/floor structure to the roof/floor structure floor structure above above above Affix #2 grade 'cap' Affix metal bracing 'cap' across the top of the across the top of the studs, then place diagonal studs, then place diagonal studs from the top cap up studs from the top cap up to underside of the roof/ to underside of the roof / floor structure above floor structure above Mounting Insert a 2" X 6" wood Fasten the Knoll In the desired location In the desired location In the desired location of In the desired location of the Knoll block, #2 grade or supplied cabinet of the cabinet mounting of the cabinet mounting the cabinet mounting rail, the cabinet mounting rail, Supplied better, [or a Danback TM wall mounting cleat, rail, remove an 8" high rail, remove an 8" high remove an 8" high section remove an 8" high section Cleat, flexible wood backing bracket, frame, section of drywall the section of drywall the of drywall the width of the of drywall the width of the Bracket, system] horizontally etc. directly to the width of the cabinet, width of the cabinet, cabinet, and beyond to cabinet, and beyond to Frame, etc* between each of the masonry wall every 6" and beyond to the next and beyond to the next the next stud. the next stud. studs to accommodate stud. stud. the full width of the For wall mounting Insert a 2" X 6" wood Insert a 2" X 6" wood cabinet, and beyond structures that have a Insert a 2" X 6" wood Insert a 2" X 6" wood block, #2 grade or better, block, #2 grade or better, to the next stud. rectangular frame-like block, #2 grade or block, #2 grade or better, [or a Danback™ flexible [or a Danback™ flexible configuration: fasten better, horizontally horizontally between wood backing system] wood backing system] Fasten the wood block the top horizontal between each of the each of the exposed horizontally between each horizontally between each to each stud using element of the frame exposed studs. studs. of the exposed studs. of the exposed studs. three screws at the to the wall every 6", ends of each block. and fasten the lower Fasten the wood block Fasten the wood block Fasten the wood block Fasten the wood block (Fasten the Danback™ horizontal element to to each stud using three to each stud using three to each stud using three to each stud using three as directed by the the wall every 16" screws at the ends of screws at the ends of screws at the ends of screws at the ends of manufacturer) each block. each block. each block. each block. Fasten the Knoll Replace the drywall and Replace the drywall and Replace the drywall and Replace the drywall and supplied wall mounting repair as desired. repair as desired. repair as desired. repair as desired. cleat, bracket, frame, Fasten the Knoll supplied Fasten the Knoll supplied Fasten the Knoll supplied Fasten the Knoll supplied etc directly to each wall mounting cleat, rail, wall mounting cleat, rail, wall mounting cleat, rail, wall mounting cleat, rail, wood block every 6" frame, etc directly to the frame, etc directly to the frame, etc directly to the frame, etc directly to the For wall mounting wood block every 6" wood block every 6" wood block every 6" wood block every 6" structures that have a For wall mounting For wall mounting For wall mounting For wall mounting rectangular frame-like structures that have a structures that have a structures that have a structures that have a configuration: fasten rectangular frame-like rectangular frame-like rectangular frame-like rectangular frame-like the top horizontal configuration: fasten the configuration: fasten the configuration: fasten the configuration: fasten the element of the frame top horizontal element top horizontal element top horizontal element of top horizontal element of to the wood blocking of the frame to the of the frame to the the frame to the wood the frame to the wood every 6", and fasten wood blocking every wood blocking every blocking every 6", and blocking every 6", and the lower horizontal 6", and fasten the lower 6", and fasten the lower fasten the lower horizontal fasten the lower horizontal element to each horizontal element to horizontal element to element to each wall element to each wall wall stud, using one each wall stud, using each wall stud, using one stud, using one fastener stud, using one fastener fastener per stud. one fastener per stud. fastener per stud. per stud. per stud. *Graham Wall The Graham Wall Hung Fasten the Knoll The Graham Wall Hung The Graham Wall Hung The Graham Wall Hung The Graham Wall Hung Hung Shelf Shelf Bracket (and supplied wall Shelf Bracket (and Shelf Bracket (and others Shelf Bracket (and others Shelf Bracket (and others others like it) requires mounting brackets others like it) requires full like it) requires full support like it) requires full support like it) requires full support full support behind the directly to the support behind the full behind the full height of behind the full height of behind the full height of full height of the bracket masonry wall, using height of the bracket the bracket the bracket the bracket the holes provided in This should be each bracket This should be This should be This should be This should be accomplished by accomplished by accomplished by insertion accomplished by insertion accomplished by insertion insertion of additional insertion of additional of additional 2"X 6" wood of additional 2"X 6" wood of additional 2"X 6" wood 2"X 6" wood blocking 2"X 6" wood blocking blocking between the blocking between the blocking between the between the studs as between the studs as studs as defined above studs as defined above studs as defined above defined above defined above Fasten #10 x 2 1/2" Grabber 3/16" x 3 1/2" Tapcon #10 x 2 1/2" Grabber #10 x 2 1/2" Grabber #10 x 2 1/2" Grabber #10 x 2 1/2" Grabber the Knoll Woodys Screws Masonry Screws or Woodys Screws Woodys Screws or Woodys Screws or Woodys Screws or equiv. supplied wall or equiv. @ 6" c/c, equiv. @ 6" c/c with or equiv. @ 6" c/c, equiv. @ 6" c/c, screwed equiv. @ 6" c/c, screwed @ 6" c/c, screwed directly cleat with... screwed directly into screwed directly into the directly into the wood directly into the wood into the wood blocking the wood blocking 1-1/4" embedment, wood blocking blocking blocking screwed directly into the masonry wall

87 Alpha-Numeric Index

pattern no. page pattern no. page pattern no. page pattern no. page AA1CG 32 ACE1L4872SDN 61 AMC FP2 (L or N) 48 APC 1648 F 22 AA1DHPS36(5) 40 ACE1L4872SSN 61 AMC FP3 (L or N) 48 APC 1648 M 20 AA1DHPS42(5) 40 ACE1L4878SSN 61 AMC O3 48 APC 1648 P 21 AA1DHPS50(5) 40 ACE1L4884SSN 61 AMC O5E 48 APC 1648 PT 21 AA1DHPS57(5) 40 ACE1L6042SSN 61 AMC O6 48 APC 1660 A 23 AA1DHPS64(5) 40 ACE1L6048DSN 62 AMC OF500 48 APC 1660 F 22 AA1DHTC 40 ACE1L6048SDN 62 AMC OF625 48 APC 1660 M 20 AA1FDB27 32 ACE1L6048SSN 61 AMC PDC 5E4N 48 APC 1660 P 21 AA1FDB28 32 ACE1L6642SSN 62 AMC5 CP12 48 APC 1660 PT 21 AA1FUPS39 39 ACE1L6648DSN 62 AMC5 OC20(A or B) 48 APC 1672 A 23 AA1NSK 32, 84 ACE1L6648SDN 62 AMC5 OC30(A or B) 48 APC 1672 F 22 AA1OR 26 ACE1L6648SSN 62 AMC5 OC40(A or B) 48 APC 1672 M 20 AA1ORD 26 ACE1L7242SSN 62 AMC5 OC50(A or B) 48 APC 1672 P 21 AA1RPS34 36 ACE1L7248DSN 62 APA 39 31 APC 1672 PT 21 AA1RPS42 36 ACE1L7248SDN 62 APA 48 31 APC 1836 A 23 AA1RPS49 36 ACE1L7248SSN 62 APA 64 31 APC 1848 A 23 AA1RPS64 36 ACE1L7842SSN 62 APC 0912 A 23 APC 1860 A 23 AA1RPS79 36 ACE1L7848SSN 62 APC 0912 C 19 APC 1872 A 23 AA1RTC 36 ACE1L8448SSN 62 APC 0912 CX 19 APC 2736 A 24 AA1UA39 38 ACE1R1212G 63 APC 0912 F 22 APC 2748 A 24 AA1UA48 38 ACE1R2424N 59 APC 0912 P 20 APC 2760 A 24 AA1UA64 38 ACE1R2430N 59 APC 0912 PT 20 APC 2772 A 24 AA1UPS39 38 ACE1R3024N 59 APC 0912 S 19 APC AZ48 16 AA1UPS48 38 ACE1R3030N 59 APC 0924 A 23 APC AZ48 F 17 AA1UPS64 38 ACE1R3624N 59 APC 0924 C 19 APC AZ60 16 AA2 UTC 38, 39 ACE1R3630N 59 APC 0924 F 22 APC AZ60 F 17 AB1 AC24 66 ACE1R4224N 59 APC 0924 M 20 APC AZ72 16 AB1 CS 69 ACE1R4230N 59 APC 0924 P 20 APC AZ72 F 17 AB1 F24 84 ACE1R4824N 59 APC 0924 PT 20 APC HOC 18 AB1 FE 66 ACE1R4830N 59 APC 0924 S 19 APC OC 18 AB1-ABC24 66 ACE1R5424N 59 APC 0936 A 23 APC OCF 18 AB1FAE 32, 66 ACE1R5430N 59 APC 0936 C 19 APF 1848 14 AB2 AE 66 ACE1R6024N 59 APC 0936 F 22 APF 1860 14 AB2 FE27 66 ACE1R6030N 59 APC 0936 M 20 APF 1872 14 AB2 FE28 66 ACE1R6624N 59 APC 0936 P 20 APF1 3948 13 ACE1CR24L 63 ACE1R6630N 59 APC 0936 PT 20 APF1 3960 13 ACE1CR24N 63 ACE1R7224N 59 APC 0936 S 19 APF1 3972 13 ACE1CR24R 63 ACE1R7230N 59 APC 0948 A 23 APF1 4848 13 ACE1H4818 63 ACE1R7824N 59 APC 0948 C 19 APF1 4860 13 ACE1H4818P 63 ACE1R7830N 59 APC 0948 F 22 APF1 4872 13 ACE1H6024 63 ACE1R8424N 59 APC 0948 M 20 APF1 6448 13 ACE1H6024P 63 ACE1R8430N 59 APC 0948 P 20 APF1 6460 13 ACE1L3636SSN 60 ACE1R9024N 59 APC 0948 PT 20 APF1 6472 13 ACE1L4242DSN 60 ACE1R9030N 59 APC 0948 S 19 APFA1 3948 13 ACE1L4242SDN 60 ACE1R9624N 59 APC 0960 A 23 APFA1 3960 13 ACE1L4242SSN 60 ACE1R9630N 59 APC 0960 C 19 APFA1 3972 13 ACE1L4260SSN 61 ACE1W362430N 64 APC 0960 F 22 APFA1 4848 13 ACE1L4266SSN 61 ACE1W363024N 64 APC 0960 M 20 APFA1 4860 13 ACE1L4272SSN 61 ACE1W422430N 64 APC 0960 P 20 APFA1 4872 13 ACE1L4278SSN 61 ACE1W423024N 64 APC 0960 PT 20 APFA1 6448 13 ACE1L4848DDN 60 ACE1W482430N 64 APC 0960 S 19 APFA1 6460 13 ACE1L4848DSN 60 ACE1W483024N 64 APC 0972 A 23 APFA1 6472 13 ACE1L4848SDN 60 ACE1W722430N 64 APC 0972 C 19 APR 48 15 ACE1L4848SSN 60 ACE1W723024N 64 APC 0972 F 22 APR 480 15 ACE1L4860DSN 61 AF 4848 AM 49 APC 0972 M 20 APR 60 15 ACE1L4860SDN 61 AF 4860 AM 49 APC 0972 P 20 APR 600 15 ACE1L4860SSN 61 AF 6448 AM 49 APC 0972 PT 20 APR 72 15 ACE1L4866DSN 61 AF 6460 AM 49 APC 0972 S 19 APR 720 15 ACE1L4866SDN 61 AMB CP12-AMP 48 APC 1636 A 23 APT 27 ACE1L4866SSN 61 AMB CP24 LUC 48 APC 1636 F 22 APT 48 15 ACE1L4872DSN 61 AMC B10 48 APC 1648 A 23 APT 60 15

88 Currents pattern no. page pattern no. page pattern no. page pattern no. page APT 72 15 AR1 TJ10 45 AUA1 1272 G 51 AUPM C4884S5 80 APT C24 15 AR1 TJ12 45 AUA1 1524 G 51 AUPM C6036S5 78 APT C36 15 AR1 TJ2 45 AUA1 1536 G 51 AUPM C6042L5 78 APT C48 15 AR1 TJ3 45 AUA1 1548 G 51 AUPM C6042R5 79 APT C60 15 AR1 TJ4 45 AUA1 1560 G 51 AUPM C6042S5 78 APT C72 15 AR1 TJ5 45 AUA1 1572 G 51 AUPM C6048D5 78 APT1 C24 15 AR1 TJ6 45 AUP B3624M 85 AUPM C6048L5 78 APT1 C36 15 AR1 TJ8 45 AUP B3624RC 85 AUPM C6048R5 79 APT1 C48 15 AR1 TOM 44 AUP B4824M 85 AUPM C6048S5 78 APT1 C60 15 AR1 TPC1 45 AUP B4824RC 85 AUPM C6060D5 77 APT1 C72 15 AR1 TPC2 45 AUP B6024M 85 AUPM C6060S5 77 APTA 48 15 AR1 TPH1 45 AUP B6024RC 85 AUPM C7236S5 78 APTA 60 15 AR1 TPH2 45 AUP B7224M 85 AUPM C7242L5 78 APTA 72 15 AR1 TPHF 32 AUP B7224RC 85 AUPM C7242R5 79 APTA CC 27 AR1 TPI2 45 AUP C4872S5 71 AUPM C7242S5 78 APTA CC1 27 AR1 TPI5 45 AUP C7248S5 71 AUPM C7248D5 78 APX CIP4 47 AR1 TPIC 45 AUP D624 73 AUPM C7248L5 78 APX CIP6 47 AR1 TT1 45 AUP M72DC4 70 AUPM C7248R5 79 APX CIP8 47 AR1 TT3 45 AUP M72DF4 70 AUPM C7248S5 78 AR OF 18, 48 AR1 TT5 45 AUP MR36 85 AUPM C8448D5 78 AR1 CB 84 AR1 TT8 45 AUP MR48 85 AUPM C8448L5 78 AR1 DA 41, 44 AR1-ELS-B 41, 44 AUP MR60 85 AUPM C8448R5 79 AR1 DAC 41, 44 AR1VCM 32 AUP MR72 85 AUPM C8448S5 78 AR1 DB 41, 44 AR1VCM5 32 AUP O664 73 AUPM D594 82 AR1 DBC 41, 44 AR1VCM6 32 AUP R424 73 AUPM D604 82 AR1 DC 44 ARE1 DA 46 AUP S48D4 72 AUPM P4875S5 82 AR1 DCC 44 ARE1 DB 46 AUP S48S2 72 AUPM P7548S5 82 AR1 DX 41, 44 ARE1 DC 46 AUP S48S4 72 AUPM S30D4 75 AR1 DXC 41, 44 ARE1 DX 46 AUP S60D4 72 AUPM S30S4 75 AR1 DY 41, 44 ARE1 DX (O or T) 46 AUP S72D4 72 AUPM S36D4 75 AR1 DYC 41, 44 ARE1 DY 46 AUP S72E4 72 AUPM S36S2 76 AR1 DZ 44 ARE1 DY (O or T) 46 AUP T363 73 AUPM S36S4 75 AR1 DZC 44 ARE1 DZ 46 AUP V48S5 71 AUPM S42D4 75 AR1 E2 43 ARE1 DZ (O or T) 46 AUP W60D4 73 AUPM S42S2 76 AR1 E3 43 ARE1 EP1 46 AUP Y72DCL4 70 AUPM S42S4 75 AR1 EJ1 42 ARE1 ET1 46 AUP Y72DCR4 70 AUPM S48D4 75 AR1 EJ10 42 ARE1 ET3 46 AUP Y72DFL4 70 AUPM S48S2 76 AR1 EJ12 42 ARE1 ET5 46 AUP Y72DFR4 70 AUPM S48S4 75 AR1 EJ2 42 ARE1 TP1 46 AUPCCV 74 AUPM S54D4 75 AR1 EJ3 42 ARE1 TT1 46 AUPCGV 74 AUPM S54S4 75 AR1 EJ4 42 ARE1 TT3 46 AUPLC4 84 AUPM S60D4 75 AR1 EJ5 42 ARE1 TT5 46 AUPLC5 84 AUPM S60S2 76 AR1 EJ6 42 AS1 DPAD 67, 68 AUPM C3660S5 80 AUPM S60S4 75 AR1 EJ8 42 AS1 SPAD 67, 68 AUPM C3672S5 80 AUPM S66D4 75 AR1 EOM 41 AU 1224 A 50 AUPM C4242D5 77 AUPM S66S4 75 AR1 EPC1 43 AU 1236 A 50 AUPM C4242S5 77 AUPM S72D4 75 AR1 EPC2 43 AU 1248 A 50 AUPM C4260L5 81 AUPM S72S4 75 AR1 EPH1 42 AU 1260 A 50 AUPM C4260R5 80 AUPM S84D4 75 AR1 EPH2 42 AU 2124 A 50 AUPM C4260S5 80 AUPM S84S4 75 AR1 EPHF 32 AU 2136 A 50 AUPM C4272L5 81 AUPM SCV 83 AR1 EPI2 42 AU 2148 A 50 AUPM C4272R5 80 AUPM SGV 83 AR1 EPI5 42 AU 2160 A 50 AUPM C4272S5 80 AW1 A60L 57 AR1 EPIC 42 AU 2824 A 50 AUPM C4848D5 77 AW1 A60R 57 AR1 ET1 42 AU 2836 A 50 AUPM C4848S5 77 AW1 A72L 57 AR1 ET3 42 AU 2848 A 50 AUPM C4860D5 80 AW1 A72R 57 AR1 ET5 42 AU 2860 A 50 AUPM C4860L5 81 AW1 C3660 S 55 AR1 ET8 42 AUA1 0824 G 51 AUPM C4860R5 80 AW1 C3672 S 55 AR1 HCC H10 47 AUA1 0836 G 51 AUPM C4860S5 80 AW1 C3684 S 55 AR1 HOB 18 AUA1 0848 G 51 AUPM C4872D5 80 AW1 C4242 D 53 AR1 HOB2 18 AUA1 0860 G 51 AUPM C4872L5 81 AW1 C4242 L 53 AR1 PCC 100 47 AUA1 0872 G 51 AUPM C4872R5 80 AW1 C4242 R 53 AR1 RCM 10 47 AUA1 1224 G 51 AUPM C4872S5 80 AW1 C4242 S 53 AR1 T2 45 AUA1 1236 G 51 AUPM C4884D5 80 AW1 C4260 L 55 AR1 T3 45 AUA1 1248 G 51 AUPM C4884L5 81 AW1 C4260 R 55 AR1 TJ1 45 AUA1 1260 G 51 AUPM C4884R5 80 AW1 C4260 S 55

89 Currents pattern no. page pattern no. page pattern no. page pattern no. page AW1 C4272 L 55 AW1 F7230 52 AX1 V18 28 R3B0P0H6407 37 AW1 C4272 R 55 AW1 F8424 52 AX1 V39 25 R3B0P0H7907 37 AW1 C4272 S 55 AW1 F8430 52 AX1 V48 25 R3B0T0F4207 37 AW1 C4284 L 55 AW1 P4875 S 56 AX1 V64 25 R3B0T0F4907 37 AW1 C4284 R 55 AW1 P4887 S 56 AX1 X18 28 R3B0T0F6407 37 AW1 C4284 S 55 AW1 P7548 S 56 AX1 X39 25 R3B0T0F7907 37 AW1 C4848 D 53 AW1 P8748 S 56 AX1 X48 25 R3B0T0H4207 37 AW1 C4848 L 53 AW1 R7236 57 AX1 X64 25 R3B0T0H4907 37 AW1 C4848 R 53 AW1 S2424 52 AX1 Y18 28 R3B0T0H6407 37 AW1 C4848 S 53 AW1 S3024 52 AX1 Y39 25 R3B0T0H7907 37 AW1 C4860 D 55 AW1 S3624 52 AX1 Y48 25 USAMP1616 65 AW1 C4860 L 55 AW1 S3630 52 AX1 Y64 25 AW1 C4860 R 55 AW1 S4224 52 AX1A F18H 29 AW1 C4860 S 55 AW1 S4824 52 AX1A F18L 29 AW1 C4872 D 55 AW1 S4830 52 AX1DHES3600L(5) 35 AW1 C4872 L 55 AW1 S6024 52 AX1DHES3600R(5) 35 AW1 C4872 R 55 AW1 S6030 52 AX1DHES3603L(5) 35 AW1 C4872 S 55 AW1 S6624 52 AX1DHES3603R(5) 35 AW1 C4884 D 55 AW1 S7224 52 AX1DHES4200L(5) 35 AW1 C4884 L 55 AW1 S7230 52 AX1DHES4200R(5) 35 AW1 C4884 R 55 AW1 S8424 52 AX1DHES4203L(5) 35 AW1 C4884 S 55 AW1 S8430 52 AX1DHES4203R(5) 35 AW1 C6036 S 54 AWM1 S36 58 AX1DHES5000L(5) 35 AW1 C6042 L 54 AWM1 S42 58 AX1DHES5000R(5) 35 AW1 C6042 R 54 AWM1 S48 58 AX1DHES5003L(5) 35 AW1 C6042 S 54 AWM1 S60 58 AX1DHES5003R(5) 35 AW1 C6048 D 54 AWM1 S66 58 AX1DHES5700L(5) 35 AW1 C6048 L 54 AWM1 S72 58 AX1DHES5700R(5) 35 AW1 C6048 R 54 AWM1 S78 58 AX1DHES5703L(5) 35 AW1 C6048 S 54 AWM1 S84 58 AX1DHES5703R(5) 35 AW1 C6060 D 53 AX1 AK1 30 AX1DHES6400L(5) 35 AW1 C6060 L 53 AX1 AK3 30 AX1DHES6400R(5) 35 AW1 C6060 R 53 AX1 F18 29 AX1DHES6403L(5) 35 AW1 C6060 S 53 AX1 F39 27 AX1DHES6403R(5) 35 AW1 C7236 S 54 AX1 F48 27 AX1LEG 14 AW1 C7242 L 54 AX1 F64 27 AX1LEG5 14 AW1 C7242 R 54 AX1 FF 14 AX1LEG6 14 AW1 C7242 S 54 AX1 FHLS4818 30 AX1SED3939 33 AW1 C7248 D 54 AX1 FWS 39 30 AX1SED4239 33 AW1 C7248 L 54 AX1 FWS 48 30 AX1SED4339C 33 AW1 C7248 R 54 AX1 FWS 64 30 AX1SED4848 33 AW1 C7248 S 54 AX1 HLS4839 26 AX1SED5039 33 AW1 C8436 S 54 AX1 HLS6439 26 AX1SED5048 33 AW1 C8442 L 54 AX1 HLS6448 26 AX1SED5248C 33 AW1 C8442 R 54 AX1 L18 28 AX1SED5739 33 AW1 C8442 S 54 AX1 L39 25 AX1SED5748 33 AW1 C8448 D 54 AX1 L48 25 AX1SED6439 33 AW1 C8448 L 54 AX1 L64 25 AX1SED6448 33 AW1 C8448 R 54 AX1 R34239 36 AX1SED6464 33 AW1 C8448 S 54 AX1 R34939 36 AX1SED7848 33 AW1 CS3612 69 AX1 R34948 36 AX1SED7864 33 AW1 CS4812 69 AX1 R36439 36 AX1SX39 A (L/C/P) 34 AW1 CS6012 69 AX1 R36448 36 AX1SX39 C (L/C/P) 34 AW1 CS7212 69 AX1 R36464 36 AX1SX48 A (L/C/P) 34 AW1 F2424 52 AX1 R37939 36 AX1SX48 C (L/C/P) 34 AW1 F3024 52 AX1 R37948 36 AX1SX64 A (L/C/P) 34 AW1 F3624 52 AX1 R37964 36 AX1SX64 C (L/C/P) 34 AW1 F3630 52 AX1 S 26 CSAMP1616 65 AW1 F4224 52 AX1 SWS39 26 MM2-CG 84 AW1 F4824 52 AX1 SWS48 26 R3B0P0F4207 37 AW1 F4830 52 AX1 SWS64 26 R3B0P0F4907 37 AW1 F6024 52 AX1 T18 28 R3B0P0F6407 37 AW1 F6030 52 AX1 T39 25 R3B0P0F7907 37 AW1 F6624 52 AX1 T48 25 R3B0P0H4207 37 AW1 F7224 52 AX1 T64 25 R3B0P0H4907 37

90 Selling Policy

This Selling Policy supersedes all previous selling policies and is inclusive of Knoll, KnollStudio and Muuto. Prices, discounts and product offerings are subject...... to change without notice...... Terms & Conditions Sales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada are made only of Sales on the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms and conditions. This sale is expressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions may apply to KnollStudio and KnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by an authorized representative of Seller. These terms and conditions supersede any prior and/or contemporaneous agreements or correspondence between Purchaser and Seller. Written quotations expire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during that period. Where Purchaser and Seller have entered into the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and other business communications placed or transmitted in accordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signed and shall be valid for all purposes as if they were originated...... and maintained in documentary form...... Ordering Information All...... orders must be in writing. The product pattern number(s)...... contained on Seller’s order acknowledgement shall be the...... final expression of the order. Order Confirmation A...... purchase order is not binding on Seller until Purchaser has...... received Seller’s order confirmation or acknowledgment...... Pricing Policies List prices are subject to change without notice. List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days after order entry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, no other charges...... are included in Seller’s list prices...... Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax, Purchaser...... shall submit to Seller the appropriate exemption certificates...... Terms of Payment Payment for one hundred percent (100%) of the net order amount (including any applicable shipping and handling fee) is due within thirty (30) days of the date of invoice, which is generally issued upon shipment. In case of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deducted and the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder due within thirty (30) days of the date of invoice. KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax and charges for inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) deposit is due at time of order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due prior to shipment. If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment in advance. Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be added to the outstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’s fees and costs...... Changes and Standard purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Cancellation Expenses incurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation charges established by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited delivery programs, may not be canceled. QuickShip orders may not be changed or canceled without Knoll’s authorization. In the event of Muuto order changes, 25% payment of original net order amount is required for changes incurring the week the order was entered. 100% payment of original net order amount is required for changes incurring the week the...... order is scheduled to ship. If Muuto is ordered on QuickShip,...... the QuikShip policy supersedes...... Freight Prepaid For standard orders, freight is prepaid and included in the price of all Knoll Office and KnollStudio Products, except KnollTextiles and Muuto, within the 48 contiguous United States for orders placed with Knoll, Inc. and within Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing is tested for rigorous motion and transportation but is not guaranteed to protect furniture from all conditions. If special packaging is required for any reason, please consult with your sales representative or dealer. Seller shall select the method of shipment and routing. Freight for all KnollTextiles orders is prepaid and added to the invoice. Freight...... for all Muuto orders must be specified at time of order...... placement and added to the PO...... Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin. For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including any handling and transportation charges incidental to loading at the point of departure and unloading at the final destination. Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not be responsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing. Nonstandard methods of shipment and/or additional services are available upon request. Orders for QuickShip product shipping direct parcel or White Glove are subject to additional shipping and handling charges and must be paid by Purchaser. Purchaser will be billed for the differential cost of any special services in excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicle and extra, export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery. Partial...... shipments may be made and invoiced by Seller...... Claims All shipments for Knoll Products within the contiguous United States and Canada are F.O.B. Origin. All risk of loss passes to Purchaser at time of delivery to carrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are, or should be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to notify Seller during the ten (10) working day period shall constitute acceptance of the Products and waiver of any apparent defects, errors or shortages. For all claims relating to Product damaged in transit or for any other claims relating to or arising out of the transportation of the Product, Purchaser must seek recovery from the carrier and Seller has no liability to Purchaser for such claims. Seller may, upon request, assist Purchaser with filing of such claims with the carrier, but Seller will not be liable for any of these transportation related...... claims......

June 1, 2021 91 Selling Policy

Seller's Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, including but not limited...... to the execution and filing of documentation, which may...... be necessary to perfect and assure the security interest...... of Seller. Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call Customer Service. All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Products not currently offered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition and in the original Seller...... packing cartons. No refund or credit shall be given for...... damaged Products...... Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requests a delay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when the order is ready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, including demurrage, preparation for storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to the Product shall pass to the Purchaser upon delivery of the Product into storage. Customer's Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requested material to Seller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets any requirements of Underwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For a description of the procedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have no responsibility for the appearance, condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnify and hold Seller harmless for any damages,...... injuries or losses arising out of or related to use of...... the COM on the Product...... Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship and materials, during the applicable warranty period set forth below. Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair). Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment, Seller shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.

Product and Period of Warranty Lifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Morrison, Reff Profiles laminate, Rockwell Unscripted, Series 2 Storage, Template, Quoin and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical, Lighting, Series 2 Veneer Front Storage, digital locks, upholstery, textiles and leathers, special or custom products, see below), Islands Collection table structure, legs, and laminate worksurfaces.

12 Years: Chadwick, Generation by Knoll, k. task, Life, Moment, MultiGeneration by Knoll, Ollo, ReGeneration by Knoll, Remix, and Toboggan seating (except seating upholstery, textiles, leathers and finishes, see below).

10 Years: Anchor Storage except digital locks, Antenna Workspaces, AutoStrada, Crinion Open Table, Dividends Horizon, Dividends Horizon Satellite Surfaces, Reff Profiles, Rockwell Unscripted, Quoin wood components, Template wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces, Wood Casegoods (The Graham Collection) (except wood casegoods upholstered surfaces, see below), Reuter overheads, Reuter vertical storage, KnollExtra Sapper Monitor Arm Collection, Sapper XYZ Monitor Arm Series, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, cork and FilzFelt, see below), Smokador collection (except leathers, see below), Orchestra Universal Systems Accessories, k. lounge structural components, KnollStudio Pixel and Propeller, Tone bases and k.screens, and dealer-purchased non BIFMA-certified Muuto products.

5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneer products and plywood, Currents handcrank, KnollStudio, Pixel Lounge, Rockwell Unscripted wire bases, Spark Series seating structural elements, structural elements of all KnollStudio outdoor products including all Richard Schultz designed products, KnollExtra CPU holders and all universal storage drawers and Power Collection, k. bench (except changes in finish, see below) and k. stand bases (except changes in finish, see below), Islands Collection veneer worksurfaces, operational parts, wide grommet lid, castors, glides and electrical, and dealer-purchased non BIFMA-certified Muuto products.

3 Years: Rockwell Unscripted upholstery (except textiles and leather), Office Seating upholstery, textiles, leathers and finishes. Fabric boards textiles and Smokador Collection leathers, KnollExtra Pop Up Screens, k.screen (except cork and PET), and retailer-purchased Muuto products.

2 Years: Anchor Storage digital locks, Quoin digital locks, all other KnollExtra product.

1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods, upholstered surfaces, KnollStudio, textiles, leathers and outdoor product finishes, Pixel Lounge fabric, k. lounge upholstery and k. lounge fabric, Rockwell Unscripted fabric and accessories, k.screen cork and PET. This warranty does not apply to: • Damage caused by a carrier other than the Seller. • Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products). • COM or other third party materials applied to Products. • Products not installed by or under the auspices of a Knoll Dealer. • Dramatic temperature variations or exposure to unusual conditions. • Changes in surface finishes, including colorfastness due to aging or exposure to light. • Except as specifically noted above, textiles and upholstery supplied by KnollTextiles and Spinneybeck FilzFelt (consult current price lists for applicable warranties). Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matching of the colors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces. THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROM COURSE OF DEALING OR USAGE OF TRADE. The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of its Products. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller, with

June 1, 2021 92 Selling Policy

respect...... to or arising out of the Product furnished hereunder...... Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of war or terrorism, act of any governmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor, materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond its reasonable control. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocate available Product or...... cancel any purchase order...... Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES, REGULATIONS,...... RULES AND STANDARDS RELATING TO...... THE INSTALLATION, MAINTENANCE, USE AND OPERATION...... OF THE PRODUCTS. Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against the Purchaser, and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunder constitutes a direct or a contributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only if Purchaser shall have made all payments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistance for the defense of said claim, suit or proceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended. The foregoing indemnity does not apply to the following: • Products supplied according to a design other than that of Seller, and which is required by the Purchaser. • Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer. •...... Any settlements of a suit or proceeding made without Seller’s...... written consent...... Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BE LIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM A BREACH OF THIS AGREEMENT. Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered into between the parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.

June 1, 2021 93 KnollKey Lock Program

KnollKey How to Specify Lock Program Key-Alike General Information Following is an example of how to specify key-alike for a cluster of 10 workstations. Following is the KnollKey lock policy, applicable to all products. Step 1 - Using the project floorplan, count the number of locks in each Knoll furniture can be ordered keyed-alike or random keyed. Key-alike workstation. and random keying instructions cannot be mixed on any single order. Only one of the two instructions can be used on an individual order. When an order is submitted with mixed (key-alike and random) instructions, Knoll will release the order as key-alike only and lock cores will have to be specified separately. Key-alike For the convenience of the user, furniture may be keyed alike at no charge. Write ‘‘Key-alike’’ in the description of your purchase order for any pedestal, overhead, file or other item you wish to have keyed alike. Using the key-alike instructions, order cores and keys as line items on your purchase order. Do NOT submit a key-alike form. The Knoll East Greenville Lock Center will select key numbers from the standard range of K 001 - K 250. Key numbers will not be repeated unless over 250 sets are Step 2 - Count the number of workstations with the same quantity of ordered. Lock cores keyed-alike will ship separately from the product, locks. Group together the workstations with a like number of locks. ready for field installation. 5 workstations with 2 locks per station 3 workstations with 4 locks per station There is no charge for key-alike orders if placed with the furniture order. 2 workstations with 5 locks per station IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKS PRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGE Step 3 - For the first group (5 sets of 2 locks), enter the number of AND AIR FREIGHT CHARGES WILL APPLY. workstations in the quantity column. If product is ordered and shipped random-keyed, additional lock cores Qty Pattern # Description Unit List Ext. List for key-alike are billable. 5 Random-Keying To specify product keyed-random, write ‘‘key-random’’ in the product Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix for the description. Random-keyed product is shipped with the lock core factory number of locks for that group (i.e., for 2 locks per station, add the suffix installed. A shrouded key is included. Random means no effort has been ‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30). made to match key numbers, or to make them different. Qty Pattern # Description Unit List Ext. List Keys 5 KSPEC 2 Set of 2 cores/keys N / C N / C A Knoll shrouded key is shipped with every lock core. 250 Key numbers are available. For numbers above 250, contact Custom Product Development. Additional keys and key blanks are available. See service Step 5 - Repeat for other groups. parts for more information. Qty Pattern # Description Unit List Ext. List Master Keying 5 KSPEC 2 Set of 2 cores/keys N / C N / C Knoll locks can be controlled by means of a master key. There is no additional per-lock charge for master keying. A letter of approval from the 3 KSPEC 4 Set of 4 cores/keys N / C N / C client must accompany orders for master keys. 2 KSPEC 5 Set of 5 cores/keys N / C N / C Installing Lock Cores Lock cores can be installed or removed in the field by using a change key. Your Key instructions are complete. Cores must be in the unlocked position to be removed. See service parts for change key pattern number and pricing. Knoll will select key numbers for each set from 250 available numbers. Additional key numbers are available through Custom Product Development. Lock Distribution For additions to existing installations, specify desired key numbers in All orders for key-alike lock cores/keys are packaged and shipped from the description. the East Greenville Lock Center, regardless of where the pedestals, overhead, or other units are produced. Random keyed product will have cores factory-installed. Service Parts Pattern # Description List Price KKEY_ _ _ Shrouded Key $10 Specify key number desired KBLANK Shrouded Key Blank $10 KSPECB_ _ _ Retrofit Universal Core/Key $22 Specify key number desired KCHANGE Change Key $10 HLKRKMASTER* Master Key $10 *Note: A letter of approval on company letterhead from the client must accompany all orders for master keys.

94 General Ordering Information

The Products This guide encompasses all standard products for this product group.

Sizes Dimensions listed in this guide are indicated as: H = height W = width D = depth Dia. = diameter Rad. = radius

Pricing All prices shown are list.

How to Order Select pattern numbers and quantities required for your complete installation. Product questions can be addressed in the specific sections of this guide or by contacting your sales representative or customer resource representative at 1-800-343-5665.

Next, select options (if required), along with colors and finishes appropriate to each product. Reference the Finishes and Fabrics pages for color designations.

On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization and handling.

To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors and area identifications are completely specified. Also, include complete purchase order numbers, bill-to and ship-to addresses, a contact name and specific factory shipping dates required.

Mail all orders to: Knoll, Inc. 1235 Water Street P.O. Box 157 East Greenville, PA 18041 Attention: Order Entry

Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of your scheduled shipping date within five days of the original acknowledgment. If it is necessary to revise your order, please contact your customer resource representative.

Sustainability Statement

Sustainable design is a key component of Knoll’s environmental focus. Our commitment to social responsibility and a healthy environment has prompted us to further articulate our longstanding environmental programs and, with encouragement and support from our colleagues in the industry, we have re-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll is proud to have contributed to projects that have received LEED certification from the U.S. Green Building Council.

For the latest information on Knoll products that help our customers achieve LEED certification, log on to knoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’