TACKLE • FLY TYING TOOLS VISES, SUNRISE, JIG TURNER

DELUXE MASTER VISE FLY KING VISE A deluxe heavy duty vise in “Black No Glare” and An inexpensive vise for the beginner. Brass finish. • Made of chrome plated high quality steel. • Heavy duty jaws will hold firmly Streamers and • Operated by wing bolts. Salmon hooks as well as small dry hooks. • Good for tying hook size 8-14. • The jaws can be rotated to inspect the underside of • Recommended for beginners, fly tying classes and kits. the fly without releasing the hook. • The angle of the jaws can be adjusted to suit the No. requirement of the individual fly tyer. 8114 • The vise comes with a deluxe table clamp. No. 8101

8114 SUPER II VISE SILVERADO VISE A very popular vise for the discriminate Hardened steel jaws. fly tyer with a “Black No Glare” finish. • X-large C-clamp No. • Extra jaw. 8103 • Stem extender. • Easy to change jaws. No. 8175

SUPER AA VISE The top selling model among all our vises. • Hardened jaws will hold wide range of hooks. ROTATING SPRING ACTION VISE • Single lever action allows quick change of hooks. Spring action hardened steel jaws will hold hooks • Grooved stem to enable vise to turn for viewing the very firmly. far end of the fly. • Specially hardened steel jaws. • Each vise packed with adjustment instructions and material spring. • The angle of the jaws can be adjusted. No. • The hardened jaws will hold hooks firmly. 8109 • Deluxe brass and no glare black finish. • Extra wide table clamp. No. 8173 SUPER AA BLACK VISE Similar to 8109 but in “Black No Glare” finish. No. ROTARY VISE 8110 PRACTICAL FLY • Body and knurled knob made of special PATTERNS THAT stainless steel. CATCH TROUT DVD • Jaws made of hardened steel. • Jaws can be rotated to inspect the underside with of the fly without releasing the hook. Charlie Meck & SUPER A VISE • Dual wing bolt system for tightening the hook. Eric Stroup Hardened jaws. • Special deluxe table clamp. Volumes One • Lever action. • The vise comes with the bobbin stand. No. & Two No. No. 8127 TIG1 8191

FLEX COAT FLEX COAT PIN CLIP EPOXY FLY & JIG TURNER This tool is used for holding a fly while applying epoxy. Pinpoint securely The use of 5-Minute epoxy and high build finish for making fly bodies, sticks into the foam while rotating the coating lures and jigs, and suspending iridescent crystals is a rapidly ET18 fly until epoxy dries. Pack of 6 pieces. expanding practice in luremaking. The key to success with this technique No. is rotating the lures while they cure. The Flex Coat Epoxy Fly and Jig PC6 turner is equipped with a USA built, continuous duty 18 RPM motor and a handy on/off switch. Lures are securely held in place by inserting hook points into durable EVA foam. This system also includes a V-upright support, which enables it to double as a rod finishing motor. No. Description ET18 3 Disk HT6 1 Disk LV Lure & jig holder

342 MERRICK TACKLE Order Toll Free: 800-628-8904 / 24/7 Toll Free Fax 800-686-7763