DOCSLIB.ORG

— 120V Electric Power Tools — Chop Saw – Bandsaw – Reciprocating

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
— 120V Electric Power Tools — Chop Saw – Bandsaw – Reciprocating — 120V Electric Power Tools — Metabo Tools start on pg. 472 Industrial Grade Double Insulated with Auto-Stop Carbon Brushes Chop Saw – Bandsaw – Reciprocating Saw – Saddle Jig 14" Chop Saw – Model CS14-15 SADDLE JET JIG™ Chop Saw Also available in 220V - Call Order # Saddle Jet Jig ARCHER SJ2200C Pipe Set Up Illustration* $39.95 Ea The SJ2200C is a saddle jet Angled Wing Plate jig. It saddles 1/2" to 3" Sticker Gauge pipe and makes a perfect Quick release adjustable vise saddle cut in as little as 30 seconds. It fits easily adds versatility. into a chop saw with no Locking "T" Tab Order #01415 adjustments needed. In just a few simple steps, be ready Includes Instructions $299.99 Ea to weld with no grinding Pipe Channel Center-Line Gauge necessary. It will save you (Magnetic) time and money. *Jig Does not included Chop Saw or Pipe Supplied with 1 Blade (Wheel) Variable Speed Portable Band Saw – Model #4479 (For blades see page 466) POWER, PERFORMANCE, DURABILITY FOR FAST, Order #4479 PORTABLE CUTTING OF DRYWALL TRACK, ANGLE IRON, CONDUIT PIPE, CHANNELS, TUBING, REBAR AND MORE... $399.85 Ea Powerful 15 AMP Motor Designed for Maximum Cutting Trigger switch in handle Efficiency – Rugged Construction - For Use with Abrasive Cut- Quick and easy blade change Off Wheels P/N 178141 (see pages 4 & 4 ) 09 10 Variable speed selection dial • For single phase alternating current (and occasional DC use) increases versatility and provides easy job repeatability • Especially suitable for quick precise cutting of steel, non-ferrous metals, iron and cast profile... Heavy-duty variable speed portable unit with large cutting capacity and lightweight design • Motor and gear with ball and needle bearing - designed for high Model # 4479 loads Capacity - Round 4 1/4" Sturdy construction with powerful motor • Capacity - Rectangular 4 1/4" x 4 3/4" • Spindle lock for easy disc change Amps 6.0 • Quick clamping device with adjustable miter conversion up to 45° Input watts 684 • Optimum and easy transportation through integrated handle No-load speed (SFPM) 90 - 240 • Tiltable grinding disc protective hood Blade length x width 44 7/8" x 1/2" THIS Tool weight 14.3 LBS. ITEM • Spanner box wrench Shipping weight 19 LBS. AVAILABLE Model # CS14-15 Length 21 1/2" Lock-off button for safety • Standard Equipment: (2" x 8") Lubrication Stick (23443) Carbon steel blade Spindle lock for convenient • Carrying case #55592 Optional wheel changes Pivoting wheel guard • Variable Speed Orbital Reciprocating Saw – Model PSE1200 All ball bearing construction • Change Blades Without Tools! for long life Auto-stop carbon brushes • easily accessible Durable steel base • 7" Rake angle for optimum cutting performance Maximum vise open 7 1/2" Switch from Straight to Orbital reciprocating action, for faster demolition work Order #01300 Maximum cutting capacity Adjustable front shoe permits work in tight spaces and provides a more $221.25 Ea - bar 2 1/2" uniform wear of teeth - pipe 4 3/4" Uses "Universal Shank" Blades Model # PSE1200 - section steel 4 3/4" x 5 1/8" (For blades see page 456) Capacity - Wood 4 1/4" No-load speed (RPM) 3900 Capacity - Metal 4 1/4" x 4 3/4" Amps 15.0 Amps 11.5 Rated input watts 2100 Input watts 1200 No-load speed (SFPM) 0 - 2600 Arbor size 1" Stroke length 1 1/8" Vise angle (adjustable) 0 - 45° Tool weight 9.3 LBS. Tool weight 45 lbs. Shipping weight 13.8 LBS. Length 17" Shipping weight 53 lbs. Rear handle can be rotated 90° left, Standard Equipment: Blade assortment Standard Equipment: 17mm wrench 90° right, or 180° for optimized handling & upward cutting. Carrying case #34445273 .
Load more

Recommended publications
  • Pta and Hand Tools
    Precision, Quality, Innovation PTA AND HAND TOOLS Hole Saws Hacksaws Jig Saws Reciprocating Saws Portable Band Saws Measuring Tapes Utility Knives Levels Plumb Bobs Chalk Rules & Squares Calipers Protractors Punches Shop Tools Lubricant Catalog 71 PRECISION, QUALITY, iNNOVATiON For more than 135 years, manufacturers, builders and craftsmen worldwide have depended upon precision tools and saws from The L.S. Starrett Company to ensure the consistent quality of their work. They know that the Starrett name on a saw blade, hand tool or measuring tool ensures exceptional quality, innovative products and expert technical assistance. With strict quality control, state-of-the-art equipment and an ongoing commitment to producing superior tools, the thousands of products in today's Starrett line continue to be the most accurate, robust and durable tools available. This catalog features those tools most widely used on a jobsite or in a workshop environment. 2 hole saws Our new line includes the Fast Cut and Deep Cut bi-metal saws, and application-specific hole saws engineered specifically for certain materials, power tools and jobs. A full line of accessories, including Quick-Hitch™ arbors, pilot drills and protective cowls, enables you to optimise each job with safe, cost efficient solutions. 09 hacksaws Hacksaw Safe-Flex® and Grey-Flex® blades and frames, Redstripe® power hack blades, compass and PVC saws to assist you with all of your hand sawing needs. 31 jig saws Our Unified Shank® jig saws are developed for wood, metal and multi-purpose cutting. The Starrett bi-metal unique® saw technology provides our saws with 170% greater resistance to breakage, cut faster and last longer than other saws.
    [Show full text]
  • 8" Utility Workshop Vise
    HAND TOOLS – 90° Vise Clamp – Magnetic Support Jig – Anvil – Vise – Jaw Caps Shipping MAGNETIC Order Capacity Jaw Jaw Weight/ SUPPORT JIG Number Miter Height Length Lbs. #M-065 90° Angle AC-325 3 11/32" 1 3/8" 4 1/8" 8 1/2 Vise Clamp Wilton 90° angle clamps take the set-up time and effort out of metalworking applications that involve $99.90 EA holding material for right angle joining, assembling, #M-063 welding or grinding. A self-centering jaw quickly adjusts to clamp work pieces, even accommodating pieces of different sizes. Speed, safety and accuracy #M-061 are the key benefits that this clamping innovation brings to your shop. The 90° angle clamp is made of high quality cast #M-060 iron and is zinc plated. The spindle, which MAG- automatically pivots for an accurate 90° grip, is also M-060 M-061 M-063 M-065 copper plated to resist weld spatter. Slotted holes TOOL are provided in the base for convenient work bench Price Ea. $5.99 $6.99 $11.99 $24.99 mounting. For added precision, work surfaces, Size Small Medium Large X-Large including base, are milled. Inches 3.6x2.4x0.44 4.7x3.4x0.56 6.3x4x0.63 7.9x5x0.88 Supports 28 lb. 45 lb. 80 lb. 95 lb. CLAMP-ON TABLE VISE: Up To Direct Lift **11 lb. **16.5 lb. **27.5 lb. **33 lb. 6" BENCH VISE, HEAVY DUTY Ea Angle Net 6 oz. 12 oz. 1.65 lb. 2.75 lb. Aluminum Weight Zinc Die **In contact with ferrous Objects of adequate thickness and Cast Body, smooth surface finish Steel Anvil MADE IN & Jaws.
    [Show full text]
  • IO-INCH DIRECT DRIVE BAND SA W CAUTION: Read GENERAL and ,, Assembly ADDITIONAL SAFETY INSTRUCTIONS • Operating Carefully , Repair Parts
    SAVE THIS MANUAL FOR FUTURE REFERENCE _ARS owners manual MODEL NO. 113.244512 Serial Number Model and serial number may be found at the right-hand side of the frame. You should record both model and serial number in a safe place for future use. IO-INCH DIRECT DRIVE BAND SA W CAUTION: Read GENERAL and ,, assembly ADDITIONAL SAFETY INSTRUCTIONS • operating carefully , repair parts Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A. Part No. 69188 FULL ONE YEAR WARRANTY ON CRAFTSMAN BAND SAW If within one year from the date of purchase, this Craftsman Band Saw fails due to a defect in material or workmanship, Sears will repair it, free of charge. ,WARRANTY SERVICE IS AVAILABLE BY SIMPLY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT THROUGHOUT THE UNITED STATES. THIS WARRANTY APPLIES ONLY WHILE THIS PRODUCT IS USED IN THE UNITED STATES. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, SEARS, ROEBUCK AND CO.. 698/731A, Sears Tower, Chicago. IL 60684 general safety instructions for power tools 1. KNOW YOUR POWER TOOL Z87.1) at all times. Everyday eyeglasses only Read and understand the owner's manual and have impact resistant lenses, they are NOT labels affixed to the toot. Learn its application safety glasses. Also, use face or dust mask if and limitations as well as'the specific potential cutting operation is dusty, and ear protectors hazards peculiar to this toot, (plugs or muffs) during extended periods of 2. GROUND ALL TOOLS operation.
    [Show full text]
  • IBS, INCORPORATED T a P S B U R S B L a D E S Index
    IBS, INCORPORATED Index 4-40 thru 1/2-10 Tap, Die & Drill Set PT-8 Taps, Burs & Blades 9/16-12 thru 3/4-16 Tap, Die & Drill Set PT-8 A Index 10 Pc NC/NF Power Taps w/Index PT-5, PT-7 10 Pc NC/NF Taper Taps w/Inde PT-5, PT-7 Annular Cutters 18 Pc NC Bottom Taps & Drill Bits w/Index PT-5, PT-7 Carbide Tipped 18 Pc NC Taper Taps & Drill Bits w/Index PT-5, PT-7 CT150 & CT200 PT-14, PT-16 Nitro-Carb Hand Tap PT-5, PT-7 IBS High Speed Steel PT-16 Assortments, Cutting Tools B Advanced Edge Power Reciprocating Saw Blades T Blades with Tool Ease Lubricant Stick PT-45 100 PK Shark Serrated Blades PT-54 Annular Cutters - Carbide Tipped Bandsaw, Bi-Metal A PT-15 General Information PT-36 Annular Cutters - High Speed Steel PT-17 Portable Blades PT-41 P Black Hole Carbide Tipped Cutters Troubleshooting PT-37, PT-38, PT-39, PT-40 1" Depth - 4 Pc.Set PT-23 Bi-Metal 1" Depth - 5 Pcs PT-23 Air Saw Blades PT-51 S 3/16" Depth - 5 Pc. PT-23 Reciprocating Saw PT-46 762R - 5 Pc. - 3/16" Depth PT-22 Boar Blades PT-48 763R - 4 Pc. 1" Depth PT-22 Thick Demolition PT-47 764R - 5 Pc. - 1" Depth PT-23 Sabre/Jig PT-52 Carbide Burs PT-59 Chop Saw-Carbide Tipped B Hole Saws 14" Blade for Aluminum PT-34 Bi-Metal 14" Blade for Stainless Steel PT-34 U Advanced Bi-Metal Hole Saws 2-1/8"- 4" PT-27 14" Blade for Steel PT-34 Advanced Bi-Metal Hole Saws 3/4"- 4" PT-28 Circular Saw Advanced Bi-Metal Hole Saws 5/8"- 2" PT-29 Combination Blade PT-32 R M42 Thin Wall Hole Saws Travel Tray Assortment PT-18 Heavy Duty Deck / Nail Cutting Blade PT-32 Hole Saws - Bi-Metal Miter Saw
    [Show full text]
  • A Different Spin on the Circle-Cutting Jig Dicey Vise Tip?
    TipsNews & &Tricks Views A different spin on Dicey vise tip? the circle-cutting jig Bill Schneider’s bandsaw circle-cutting jig (Oct/Nov 2019) inspired me to make my own version (see photos below). The pivot bar sits flush with the base’s surface on my modified sled. On the underside of the bar, I attached a 1" × 1/4"-20 threaded rod that passes through a slot in the base. A fixture knob threads onto the rod to hold the position. Pivot holes every two inches along the bar allow cutting diameters from 1" to 48". An epoxied rare earth magnet in the travel stop helps to hold the base steady while the jig is in use. And a 1" hole where the blade cuts allows better dust collection, especially when I remember to remove the bandsaw’s throat plate before using the jig. —Edward Koizumi, Oak Park, IL Nothing could convince me to put my router in a vise (Dec/Jan 2020) and turn it on. Isn’t that unsafe? —Tila Talu, via email Senior editor Paul Anthony replies: Tila, if you’re concerned that the tool might jump from the vise, you can safely assure yourself that it won’t by testing the setup first with an unarmed router. Then exercise the same safety precautions that you do when using a table-mounted router. The small work surface is obviously not meant to support large work nor, of course, would you use this setup to make heavy cuts with big bits. This is really an impromptu configuration meant for small cuts on small pieces.
    [Show full text]
  • Use the MICRODIAL Tapering Jig on Your Bandsaw
    Use The MICRODIAL Tapering Jig On Your Bandsaw (As taught to us by Scott Phillips) 1 Copyright 2013: Micro Jig www.microjig.com Produced by: Consultingwoodworker.com When we designed the MICRODIAL Tapering Jig, we knew it was great for table saw use, and the router table if the top is large enough. We had not really thought of using it on any but the very largest industrial band saws. But during a recent visit with Scott Phillips of “The American Woodshop” TV show, he showed us a clever way to use the MICRODIAL on a common 14” bandsaw. Scott had added a simple plywood extension table onto his 14” bandsaw and used a clamping straight edge as the fence. Brilliant! Scott’s band saw has a pair of steel tubes already mounted so he used toggle clamps to connect his table onto the saw. Our table was a different design, so we needed to figure out our own design. You may need to adapt this to your specific table and materials on hand. 2 Copyright 2013: Micro Jig www.microjig.com Produced by: Consultingwoodworker.com A leftover side from a shipping crate was the basis of this table. The ply was a bit rough, so it was sanded and laminated to provide a smooth working surface. Cleats along three sides will keep the 1/2" thick table flat, and clearance for the blade is a 1” wide slot so the table simply slides on from the right side of the table. The real trick is to figure out a simple and easy way to attach the auxiliary table.
    [Show full text]
  • Heritage Bamboo Band Saw Jig
    Heritage Bamboo Fly Rods Heritage Bamboo Band Saw Jig James E. (JED) Dempsey – Maker [email protected] Congratulations on your purchase of my Heritage Bamboo Band Saw Jig and continuing in the tradition of famed bamboo rodmakers such as Payne, Leonard, Halstead, Gillum and Uslan. As an apprentice at Payne under the tutelage of Walt Carpenter, I sawed many bamboo culms in preparation for them going on the Payne saw beveller. I am also the owner of the Uslan bamboo saw which uses a table saw blade that is very similar in design to my current jig except that we are using a band saw instead. Why a band saw? The answer is simple – less waste. A table saw blade is .125” or more thick and the band saw blade is usually .025” to .030” thick. That means for every 3 strips you get using a table saw, I get 4 strips or more depending on the width of strip you choose to cut. Using the procedures I have laid out below, you will get uniform straight strips that require little or no straightening. This produces time savings and eliminates a number of issues that split strips present. The one thing you will discover that “run out” is a myth promulgated by amateur rodmakers to justify splitting. Again, remember the great production rod companies and great classic rodmakers that today’s rodmakers try to copy and emulated all sawed cane and run out was never a real issue with them. The only exception was Garrison. One of the issues most of today’s rodmakers worry about sawing and working cane is generation of saw dust.
    [Show full text]
  • Get Top Results with a Real Sharpening System
    NEW DESIGN CAST FRAME FOR MAXIMUM PRECISION Tormek Jig Solutions Included with the Tormek T-8 SVM-45 Knife Jig SE-77 Square Edge Jig For most knives. Jig width 45 mm For plane irons and wood chisels. (1¾"). Long knives need to be stiff. Max tool width 77 mm (3"), max tool Minimum blade length 60 mm (23/8"). Get top results with thickness 9 mm (3/8"). Safety stops prevent Also for carver’s draw knives. the tool from slipping off the stone. UPGRADED (SE-77 replaces SE-76.) For small knives see SVM-00 under Accessories a real sharpening system SVM-140 TT-50 Truing Tool Long Knife Jig Trues the grindstone exactly round and Suitable for long and flexible knives. flat. Guided by the Universal Support, The 140 mm (5½") width of the jig which also guides the jigs. Dual knobs stabilizes a thin blade. Minimum for smooth feed across the stone. blade length 160 mm (6¼"). SVX-150 Dimensions SP-650 Stone Grader Scissors Jig Square Width 270 mm (105/8") The fine side grades the stone for a 1000 Universal Support For scissors of all sizes and shears. Edge Jig Depth 270 mm (105/8") grit finish. The coarse side of the grader • For vertical or horizontal mount. Also suitable for portable electric Height 330 mm (12") reverses the stone to normal fast grinding. • Micro adjust with scale for each 0.25 mm (0.01"). hand planer blades. Weight Activates a glazed stone. Shipping weight 18.2 kg (40.1 lbs) Machine only 14.8 kg (32.6 lbs) SVA-170 Axe Jig Leather Honing Wheel WM-200 AngleMaster For carving and carpenter’s axes.
    [Show full text]
  • 7" Zip-Miter Bandsaw Model J-9180
    Operating Instructions and Parts Manual 7" Zip-Miter Bandsaw Model J-9180 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414464 Ph.: 800-274-6848 Revision C2 09/2018 www.jettools.com Copyright © 2017 JET Warranty and Service JET® warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product. (See chart below) • Accessories carry a limited warranty of one year from the date of receipt. • Consumable items are defined as expendable parts or accessories expected to become inoperable within a reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects. Who is Covered This warranty covers only the initial purchaser of the product from the date of delivery. What is Covered This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood. Use of these machines in the processing of metal, plastics, or other materials outside recommended guidelines may void the warranty. The exceptions are acrylics and other natural items that are made specifically for wood turning.
    [Show full text]
  • Af50 Autofeed Bandsaw Operator's Manual
    Original Instructions OPERATOR'S MANUAL Version 0920A Copyright Notice Information is subject to change without notice by Tormach, Inc. For the most recent version of this document, see tormach.com/support. You're welcome to make copies of this document for evaluating, learning about, and/or using the machine. You may not charge for any copies you make beyond the cost of printing. Unless otherwise noted, companies, names, and various data used in examples are fictitious. To the Reader We're dedicated to continually improving our documentation and products, and welcome any clarifications, corrections, or suggestions. Credits Tormach®, AF50 Autofeed Bandsaw®, and PathPilot® are trademarks or registered trademarks of Tormach, Inc. Our milling machines and accessories are covered by one or more of the following U.S. Patents: 7,386,362; D606,568; D612,406; D621,859; and other patent(s) pending. Other product or company names may be the trademarks of their respective owners. Copyright © Tormach, Inc. 2020 Page 2 TABLE OF CONTENTS SAFETY 9 1.1 Safety Overview 10 1.1.1 Safety Messages 10 Personal Injury 10 Property Damage 10 1.2 Machine Safety 10 1.2.1 General Shop Safety 10 1.2.2 Operational Safety 10 General 10 Blades 11 Workholding 11 1.2.3 Electrical Safety 11 ABOUT YOUR MACHINE 13 2.1 Specifications Reference 14 SITE REQUIREMENTS 17 3.1 General Site and Space Requirements 18 3.1.1 Site Requirements 18 3.1.2 Space Requirements 18 3.2 Electrical and Power Requirements 18 3.2.1 Electrical Requirements 18 3.2.2 Power Requirements 18 3.3 Air
    [Show full text]
  • BAXTER SAW™-MODEL 280M HORIZONTAL MITER CUTTING BANDSAW 27 Kenhar Drive, North York, Ontario Canada M9L 1M9 Tel: (416) 741-7100 Fax: (416) 741-7114
    August 1, 2017 • MITTER CUTTING • 0º TO 45º BY MOVING THE SAW HEAD • ROUND CUTTING CAPACITY • 11” DIAMETER AT 90º • 10” DIAMETER AT 45º • RECTANGULAR CAPACITY • 9” X 16” • BLADE SIZE • 1” X 12’ • BLADE MOTOR • 2 HP • POWERED BLADE BRUSH MADE IN CANADA BAXTER SAW™-MODEL 280M HORIZONTAL MITER CUTTING BANDSAW 27 Kenhar Drive, North York, Ontario Canada M9L 1M9 tel: (416) 741-7100 fax: (416) 741-7114 www.verticut.com BAXTER SAWTM - MODEL 280M HORIZONTAL MITER CUTTING BANDSAW CUTTING CAPACITY Round at 90º 11" (280 mm) Round at 45º 10” (250 mm) Rectangular 9" x 16" (230 x 405 mm) Maximum Width 11” x 14” (280 x 355 mm) Maximum Height SPECIFICATIONS Blade Size 1" x 12' (27 x 3660 mm) Blade Speeds (ft/min) 60 to 400 (18 to 122 m/min) Blade Tension (spring compensated) 25,000 psi (172 MPa) Table Height 30 3/4" (780 mm) Maximum Work Load 3,000 lb. (1360 kg) Machine Weight 1,350 lb. (614 kg) Overall Dimensions 81 x 46” x 58” (2100 x 1200 x 1500 mm) DRIVE Blade Drive 2 Hp (1.5 kW) Voltages available (three phase) 575, 460, 230 and 208 FEATURES INCLUDED AS STANDARD EQUIPMENT • Scissor type saw with heavy duty all welded design for • Material discharge table, built in conveyor with 5 rollers rigidity and strength for material feed • Saw frame swings 45 degrees allowing miter cutting • Adjustable material length stop for repetitive cutting without swinging the material • Ductile iron wheels • Cam lock of saw frame with frame angle indicating • Blade guides are carbide faced with rollers to remove scale, hard stops at 0 and 45 degrees blade twist and
    [Show full text]
  • Complete Rockhard Catalog (2.4 MEG PDF)
    Missouri Precision Tool Inc 866-948-6657 www.mo2ls.com TOOLS, Inc. Missouri Precision Tool Inc 866-948-6657 www.mo2ls.com Missouri Precision Tool Inc 866-948-6657 www.mo2ls.com ROCKHARD Drilling Products Carbide Masonry Drill Bits SDS Plus 2 SDS Booster Plus 3 SDS Plus Stop Bits 3 2 Roto Percussion Straight Shank 4 Multi-purpose Drill Bits 5 Hex Multi-purpose Drill Bits 5 SDS-Max 6 Spline 2-Cutter 7 INDEX Spline 4-Cutter 7 A-Taper / Adapters 8 Core Bits 9 Points / Chisels 10 Rebar Cutters 11 Glass & Tile Drill Bits 12 Diamond Hard Tile Drill Bits 12 Jobber Length Twist Drills 118° Black 13 135° Black 14 135° Black/Gold 15 13 135° Black Cobalt 16 Silver & Deming / Jobber Sets 17 Jobber Countertop Dispenser 18 High Speed Drill Bit Display 18 Carbide Tipped HSS Metal Cutting Bits 19 Titanium Step Bits 19 Wood Spade Bits / Ship Auger Bits 20 Bell Hanger / Flex Shank Bits 21 Concrete Screws & Bits 22 ROCKHARD Fastening Systems Extruded Anchors 26 Extruded Anchor Merchandisers 27-28 Rosett Anchor Blister Packs 29 Light Rosett Anchor Blister Packs 29 26 Conical Anchor & Plastic Toggle Blister Packs 30 Conical / Rib / Super Rib Anchors Bulk & Pkg 31-32 Plastic Toggle / Longhorn Anchors Bulk & Pkg 33 Rosett Anchor Pkg 34 Light Rosett Anchors Bulk & Pkg 35 Plastic Boxes 35 Anchor Kits 36-37 Cable Ties 38-40 Cable Tie Merchandiser 41 ROCKHARD Tools Screwdriver Bit Tips / Nut Setters 42-43 Bit Tip Jar Merchandiser 44 Bit Tip Small Package Program 45-46 42 Bit Tip Small Package Display 47 Missouri Precision Tool Inc 866-948-6657 www.mo2ls.com Missouri
    [Show full text]