DOCSLIB.ORG

17Th International Congress on Sound and Vibration 2010 (ICSV

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
17Th International Congress on Sound and Vibration 2010 (ICSV 17th International Congress on Sound and Vibration 2010 (ICSV 17) Cairo, Egypt 18-22 July 2010 Volume 1 of 5 ISBN: 978-1-61782-255-1 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 Some format issues inherent in the e-media version may also appear in this print version. Copyright© (2010) by the International Institute of Acoustics & Vibration All rights reserved. Printed by Curran Associates, Inc. (2011) For permission requests, please contact the International Institute of Acoustics & Vibration at the address below. International Institute of Acoustics & Vibration c/o Dr. Malcolm J. Crocker PO Box 13 Auburn, Alabama 36831 Phone: (334) 844-3248 Fax: (334) 844-3306 www.iiav.org Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY 12571 USA Phone: 845-758-0400 Fax: 845-758-2634 Email: [email protected] Web: www.proceedings.com TABLE OF CONTENTS VOLUME 1 GENERAL ACOUSTICS 830 ARTIFICIAL SOUNDSCAPE GENERATION IN NOISE MASKING APPLICATIONS...............................................................1 Mattia Cobianchi, Lorenzo Brusci 390 ASSESSMENT OF HEARING LOSS USING A COMPUTER DEVELOPED FREE SOFTWARE AND WEB ENVIRONMENT ...............................................................................................................................................................................................9 Diego Murillo, Ever Velasquez, Carlos Castro, Andres Cardenas 573 ASSESSMENT OF AN IMPLANTED BONE-CONDUCTION HEARING AID PERFORMANCE BY EXPERIMENTS USING HUMAN CADAVERS.........................................................................................................................................17 Tatsunari Harashima, Makiko Fujii, Takuji Koike, Michihito Aoki, Kyoji Homma, Naohito Hato, Sho Kanzaki 534 SOUNDSCAPES IN THE PARTICIPATORY DESIGN OF FLORENTINE QUIET AREAS ......................................................24 Sergio Luzzi, Rossella Natale, Beatrice Gentili 864 SPEECH COMMUNICATION IN THE GREAT BALL COURT IN CHICHEN ITZA ................................................................31 Jorge Cruz GENERAL VIBRATIONS 1162 A GENERAL NONLINEAR BUSHING MODEL FOR VEHICLE RIDE STUDIES ...................................................................38 Arun Chavan, Jacco Koppenaal, Yogesh Dhakare 184 APPLYING A NEW TYPE OF PASSIVE PIEZOELECTRIC ABSORBERS FOR REDUCING VIBRATION OF A PLATE SUBJECTED TO AN IMPACT FORCE .............................................................................................................................49 Y. M. Huang, J. H. Wu 880 AN EXPERIMENTAL STUDY ON MEASUREMENT VARIATION OF SOUND INSULATION PERFORMANCE IN ISO TYPE REVERBERATION CHAMBER ........................................................................................................57 Hee-Mo Goo, Hang Kim, Dool Choi, Jung-Sik Kim, Hyeon-Ku Park, Jeong-Ryul Kim 1167 OPTIMIZATION OF EXTREMELY HIGH ACCELERATION DROP TESTS ..........................................................................64 Moustafa Al-Bassyiouni 735 PASSIVE AND ACTIVE ELECTRICAL DYNAMIC VIBRATION ABSORBERS FOR SINGLE DEGREE OF FREEDOM VIBRATION SYSTEMS.....................................................................................................................................................65 Sang-Myeong Kim, Semyung Wang, Michael J. Brennan 1169 POF VIBRATION ANALYSIS OF LEAD-FREE HVQFN ASSEMBLIES ....................................................................................73 C. Choi, Moustafa Al-Bassyiouni, A. Dasgupta, J. W. C. De Vries, W. Balemans 980 RELIABILITY OF ELECTRONIC COMPONENTS IN AUTOMOTIVE ENVIRONMENT ......................................................74 Tae-Hwan Kim, Jong-Won Lee, In-Hyung Yang, Jae-Eung Oh, Jung-Youn Lee 536 STUDY OF EARTHQUAKE-RESISTANT DESIGN FOR WIRELESS BASE STATION USING DYNAMIC RESPONSE ANALYSES AND TESTS .........................................................................................................................................................80 Bong Jin Kang, Hong Mo Koo, Young Hoon Lee, Won-Ho Kang, Young-Joong Kim, Hyo-Chol Sin 485 TRANSPORT DYNAMICS OF ELECTRONS TRAPPED IN SURFACE ACOUSTIC WAVES.................................................88 Jingbo Wang, Fillip Welna, Jie Pan S01 ACOUSTIC AND DYNAMIC PROPERTIES OF COMPOSITE AND SANDWICH MATERIALS 299 DYNAMIC AND ACOUSTIC PROPERTIES OF VISCOELASTIC LAMNATED STRUCTURES USING A WAVE FINITE ELEMENT METHOD ........................................................................................................................................................95 Elisabetta Manconi, Brian Richard Mace 530 LAYERWISE OPTIMIZATION FOR VIBRATION OF AUTOMOBILE COMPOSITE PANELS..........................................103 Yoshihiro Narita, Shinya Honda, Claire Couppie 517 PREDICTION OF THE SOUND TRANSMISSION LOSS OF SANDWICH STRUCTURES BASED ON A SIMPLE TEST PROCEDURE .....................................................................................................................................................................109 Edoardo Alessio Piana, Anders Christian Nilsson 653 PREDICTION AND CONTROL OF SOUND TRANSMISSION THROUGH HONEYCOMB SANDWICH PANELS FOR AIRCRAFT FUSELAGE AND TRAIN FLOORS ..........................................................................................................117 Ulf Erik Orrenius, Andrew Wareing, Sathish Kumar 94 PREDICTION OF VIBROACOUSTIC BEHAVIOUR OF MULTILAYERED STRUCTURES USING EQUIVALENT MATERIALS......................................................................................................................................................................125 Jean Louis Guyader, Christian Cacciolati, Erald Guyader 651 SOME SEA PARAMETERS FOR SANDWICH, COMPOSITE STRUCTURES .........................................................................133 Anders Nilsson, B. Liu, D. Backstöm S02 ACOUSTIC METAMATERIALS 118 A BOUNDARY INTEGRAL EQUATION FORMULATION FOR OPTIMIZATION OF 2D ACOUSTIC CLOACKING .................................................................................................................................................................................................141 Umberto Iemma, Lorenzo Burghignoli 723 ACOUSTIC CAVITIES BASED ON RADIAL WAVE CRYSTALS...............................................................................................148 Daniel Torrent, José Sánchez-Dehesa 865 ACOUSTICAL SCATTERING BY MULTILAYER SPHERICAL SCATTERERS CONTAINING ELECTRORHEOLOGICAL FLUID ..........................................................................................................................................................155 Liang-Wu Cai 302 BLOCH ANALYSIS OF LOSSY PERIODIC MATERIALS............................................................................................................163 Mahmoud I Hussein 1022 COMPOSITE ACOUSTIC MEDIUM WITH SIMULTANEOUSLY NEGATIVE DENSITY AND MODULUS......................................................................................................................................................................................................170 Sam Hyeon Lee, Chul Koo Kim, Choon Mahn Park, Yong Mun Seo, Zhi Guo Wang 1164 IMPROVING ACOUSTIC CLOAK BANDWIDTH USING NONLINEAR COORDINATE TRANSFORMATIONS.................................................................................................................................................................................178 Wael Akl, Tamer Elnady, Adel Elsabbagh, Mostafa Ramadan 744 NOISE CONTROL BY ABSORPTIVE SONIC CRYSTALS ...........................................................................................................187 Victor Manuel Garcia-Chocano, Jose Sanchez-Dehesa, Daniel Torrent, Francisco Cervera, Suitberto Cabrera, Francisco Simon 1158 PHYSICAL IMPLICATIONS AND APPLICATIONS OF TAILORED PHONONIC DISPERSION AND GAPS................................................................................................................................................................................................................195 Ihab El-Kady, M. F. Su, C. M. Reinke, D. Goettler, Z. Leseman, R. Olsson 591 TRANSFORMATION ACOUSTICS ...................................................................................................................................................197 Steven Cummer S03 ACOUSTICAL BOUNDARY ELEMENT 713 A BOUNDARY ELEMENT MODEL OF A KOREAN FOR EAR CANAL ACOUSTIC RESPONSE USING THE STATISTICAL CALIBRATION APPROACH................................................................................................................................203 Dooho Lee, Taesoo Ahn 690 CALCULATION OF THE TRANSMISSION LOSS OF FINITE PLATES USING NUMERICAL MODAL ANALYSIS AND BEM ..................................................................................................................................................................................211 Rafael Piscoya, Martin Ochmann 736 DIFFERENT METHODS FOR COMPUTING THE SOUND TRANSMISSION THROUGH FINITE, THIN BAFFLED PLATES.......................................................................................................................................................................................219 Martin Ochmann, Rafael Piscoya, Yohko Aoki, Waldemar Maysenhoelder 45 THEORETICAL ANALYSIS OF THE SCATTERED WAVES FROM BURIED OBJECTS IN THE ACOUSTIC LAYER......................................................................................................................................................................................227
Load more

Recommended publications
  • Directed Assembly of Particles for Additive Manufacturing of Particle-Polymer Composites
    micromachines Review Directed Assembly of Particles for Additive Manufacturing of Particle-Polymer Composites Soheila Shabaniverki 1 and Jaime J. Juárez 1,2,* 1 Department of Mechanical Engineering, Iowa State University, Ames, IA 50011, USA; [email protected] 2 Center for Multiphase Flow Research and Education, Iowa State University, Ames, IA 50011, USA * Correspondence: [email protected]; Tel.: +1-515-294-3298 Abstract: Particle-polymer dispersions are ubiquitous in additive manufacturing (AM), where they are used as inks to create composite materials with applications to wearable sensors, energy storage materials, and actuation elements. It has been observed that directional alignment of the particle phase in the polymer dispersion can imbue the resulting composite material with enhanced mechani- cal, electrical, thermal or optical properties. Thus, external field-driven particle alignment during the AM process is one approach to tailoring the properties of composites for end-use applications. This review article provides an overview of externally directed field mechanisms (e.g., electric, magnetic, and acoustic) that are used for particle alignment. Illustrative examples from the AM literature show how these mechanisms are used to create structured composites with unique properties that can only be achieved through alignment. This article closes with a discussion of how particle distribution (i.e., microstructure) affects mechanical properties. A fundamental description of particle phase transport in polymers could lead to the development of AM process control for particle-polymer composite fabrication. This would ultimately create opportunities to explore the fundamental impact that alignment has on particle-polymer composite properties, which opens up the possibility of tailoring these materials for specific applications.
    [Show full text]
  • Electrorheological Dampers for Structural Vibration Suppression
    P895-263893 11111111111111111111 11111111111 December 1994 Report No. UMCEE 94-:35 ELECTRORHEOLOGICAL DAMPERS FOR STRUCTURAL VIBRATION SUPPRESSION by Henri P. Gavin Robert D. Hanson A report on research sponsored by National Science Foundation Grant No. NSF-BCS-9201787 PROTECTED UNDER INTERNATIONAL COPYRIGHT ALL RIGHTS RESERVED. NATIONAL TECHNICAL INFORMATION SERVICE U.S. DEPARTMENT OF COMMERCE The Department of Civil and Environmental Engineering The University of Michigan Ann Arbor, Michigan 49109-2125 ACKNOWLEDGEMENTS The author thanks the National Science Foundation for providing the financial re­ sources to conduct the research described in this report. This report is, in essence, the doctoral dissertation of Henri P. Gavin. This dissertation was supported financially by a grant from the National Science Foundation under Award No. BCS-9201787 as part of the Coordinated USA Research Program on Structural Control for Safety, Performance, and Hazard Mitigation. Any opinions, findings, and conclusions or recommendations expressed in this publication are those of the author and do not necessarily reflect the views of the National Science Foundation. The contributions of Professors Hanson, McClamroch, Filisko, and Peek to this work are gratefully acknowledged. It is a privilege and an inspiration to be associated with internationally renowned leaders in their fields. Professor Hanson's skills go beyond his technical knowledge of earthquake engi­ neering and his ability to extract the most important mechanisms from very compli­ cated systems. He is a consummate organizer, leader, and mediator. I am indebted to him for providing me an opportunity to work in structural control, for his men­ torship, and for his expert guidance. Extensive discussions "With Professor Filisko contributed largely to my concept of ER materials.
    [Show full text]
  • Distributions, Measures, Functions of Bounded Variations
    Appendix A Distributions, Measures, Functions of Bounded Variations Sections A.1 and A.2 are given for the sake of completeness because some notions are used in Chaps. 1 and 2, but may be safely skipped since their implication on understanding Nonsmooth Mechanics is weak. By contrast, Sects. A.3 and B survey useful mathematical tools that cannot be ignored. A.1 Schwartz’ Distributions A.1.1 The Functional Approach In this section we first briefly introduce the functional notion of a distribution as defined in [1082]. Definition A.1 D is the subspace of smooth1 functions ϕ : Rn → C, with bounded support. Thus a function ϕ(·) on Rn belongs to D, if and only if ϕ(·) is smooth, and there n exists a bounded set Kϕ of R outside of which ϕ ≡ 0. As an example, L. Schwartz gives the following function [1082, Chap. 1,§2], with n = 1, Kϕ =[−1, 1]: 0if|t|≥1 ϕ(t) = −1 (A.1) e 1−t2 if |t| < 1 Definition A.2 A distribution D is a continuous linear form defined on the vector space D. This means that to any ϕ ∈ D, D associates a complex number D(ϕ), noted D, ϕ. The space of distributions on D is the dual space of D and is noted D . The functions in D are sometimes called test-functions. 1i.e., indefinitely differentiable. © Springer International Publishing Switzerland 2016 535 B. Brogliato, Nonsmooth Mechanics, Communications and Control Engineering, DOI 10.1007/978-3-319-28664-8 536 Appendix A: Distributions, Measures, Functions of Bounded Variations Two distributions D1, D2 are equal on an open interval Δ if D1 − D2 = 0 on Δ, i.e., if for any ϕ ∈ D whose support Kϕ is contained in Δ, then D1 − D2, ϕ=0.
    [Show full text]
  • Complex Fluids in Energy Dissipating Systems
    applied sciences Review Complex Fluids in Energy Dissipating Systems Francisco J. Galindo-Rosales Centro de Estudos de Fenómenos de Transporte, Faculdade de Engenharia da Universidade do Porto, CP 4200-465 Porto, Portugal; [email protected] or [email protected]; Tel.: +351-925-107-116 Academic Editor: Fan-Gang Tseng Received: 19 May 2016; Accepted: 15 July 2016; Published: 25 July 2016 Abstract: The development of engineered systems for energy dissipation (or absorption) during impacts or vibrations is an increasing need in our society, mainly for human protection applications, but also for ensuring the right performance of different sort of devices, facilities or installations. In the last decade, new energy dissipating composites based on the use of certain complex fluids have flourished, due to their non-linear relationship between stress and strain rate depending on the flow/field configuration. This manuscript intends to review the different approaches reported in the literature, analyses the fundamental physics behind them and assess their pros and cons from the perspective of their practical applications. Keywords: complex fluids; electrorheological fluids; ferrofluids; magnetorheological fluids; electro-magneto-rheological fluids; shear thickening fluids; viscoelastic fluids; energy dissipating systems PACS: 82.70.-y; 83.10.-y; 83.60.-a; 83.80.-k 1. Introduction Preventing damage or discomfort resulting from any sort of external kinetic energy (impact or vibration) is an omnipresent problem in our society. On one hand, impacts and vibrations are responsible for several health problems. According to the European Injury Data Base (IDB), injuries due to accidents are killing one EU citizen every two minutes and disabling many more [1].
    [Show full text]
  • A Study of Active Engine Mounts
    A Study of Active Engine Mounts Examensarbete utfört i Reglerteknik vid Tekniska Högskolan i Linköping av Fredrik Jansson & Oskar Johansson Reg nr: LiTH-ISY-EX-3453-2003 Linköping 2003 F. JANSSON O. JOHANSSON A Study of Active Engine Mounts Examensarbete utfört i Reglerteknik vid Linköpings tekniska högskola av Fredrik Jansson och Oskar Johansson Reg nr: LiTH-ISY-EX-3453-2003 Supervisor: Andreas Eidehall Linköpings Universitet Claes Olsson Volvo Car Corporation Examiner: Professor Fredrik Gustafsson Linköpings Universitet Linköping 17th December 2003 F. JANSSON O. JOHANSSON A STUDY OF ACTIVE ENGINE MOUNTS Avdelning, Institution Datum Division, Department Date 2003-12-17 Institutionen för systemteknik 581 83 LINKÖPING Språk Rapporttyp ISBN Language Report category Svenska/Swedish Licentiatavhandling X Engelska/English X Examensarbete ISRN LITH-ISY-EX-3453-2003 C-uppsats D-uppsats Serietitel och serienummer ISSN Title of series, numbering Övrig rapport ____ URL för elektronisk version http://www.ep.liu.se/exjobb/isy/2003/3453/ Titel Studie av aktiva motorkuddar Title A Study of Active Engine Mounts Författare Fredrik Jansson and Oskar Johansson Author Sammanfattning Abstract Achieving better NVH (noise, vibration, and harshness) comfort necessitates the use of active technologies when product targets are beyond the scope of traditional passive insulators, absorbers, and dampers. Therefore, a lot of effort is now being put in order to develop various active solutions for vibration control, where the development of actuators is one part. Active hydraulic engine mounts have shown to be a promising actuator for vibration isolation with the benefits of the commonly used passive hydraulic engine mounts in addition to the active ones.
    [Show full text]
  • The Effect of Dielectric Polarization Rate Difference of Filler and Matrix on the Electrorheological Responses of Poly(Ionic
    polymers Article The Effect of Dielectric Polarization Rate Difference of Filler and Matrix on the Electrorheological Responses of Poly(ionic liquid)/Polyaniline Composite Particles Chen Zheng, Qi Lei, Jia Zhao, Xiaopeng Zhao and Jianbo Yin * Smart Materials Laboratory, Department of Applied Physics, Northwestern Polytechnical University, Xi’an 710129, China; [email protected] (C.Z.); [email protected] (Q.L.); [email protected] (J.Z.); [email protected] (X.Z.) * Correspondence: [email protected]; Tel.: +86-029-88431662 Received: 1 March 2020; Accepted: 20 March 2020; Published: 22 March 2020 Abstract: By using different conductivity of polyaniline as filler, a kind of poly(ionic liquid)/polyaniline composite particles was synthesized to investigate the influence of dielectric polarization rate difference between filler and matrix on the electrorheological response and flow stability of composite-based electrorheological fluids under simultaneous effect of shear and electric fields. The composite particles were prepared by a post ion-exchange procedure and then treated by ammonia or hydrazine to obtain different conductivity of polyaniline. Their electrorheological response was measured by dispersing these composite particles in insulating carrier liquid under electric fields. It showed that the composite particles treated by ammonia had the strongest electrorheological response and 1 1 most stable flow behavior in a broad shear rate region from 0.5 s− to 1000 s− . By using dielectric spectroscopy, it found that the enhanced electrorheological response with stable flow depended on the matching degree of the dielectric polarization rates between poly(ionic liquid) matrix and polyaniline filler. The closer their polarization rates are, the more stable the flow curves are.
    [Show full text]
  • Smart Materials: Electrorheological Fluids
    International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395-0056 Volume: 05 Issue: 11 | Nov 2018 www.irjet.net p-ISSN: 2395-0072 SMART MATERIALS: ELECTRORHEOLOGICAL FLUIDS Amit Appasaheb Patil1, Rahul Ramesh Joshi2 1Professor, Department of Textile Plant Engineering Textile and Engineering Institute, Ichalkaranji, MH, India 2Professor, Department of Textile Plant Engineering Textile and Engineering Institute, Ichalkaranji, MH, India -----------------------------------------------------------------------***-------------------------------------------------------------------- Abstract:- A research is never ending process. The instable 3) At stresses greater than this yield stress, the fluid flows demand in the international market place for high like a viscous fluid, But with a large viscosity, again performance structural and Mechanical systems for the proportional to the square of the electrical field. aerospace, defence and advanced manufacturing industries has triggered the evolution of advanced composite materials. In the early 1980's, R Stan way, Sproston, developed a class With world’s technological revolutionary era, we come across of ER fluids made from ionic polymers with greatly improved various smart materials which can be successfully properties. implemented into new practices for the fulfilment of human as well as technology requirements. Radical improvements of ER fluids are colloidal suspensions of particles of size 1- industrial processes cannot be achieved solely by increasing 100 microns in no conducting solvents the efficiency of traditional production techniques and tools, The viscosity of ER suspensions can increase 2-3 orders but requires new solutions, employing novel ideas. One of magnitude when electric fields ~1kV/mm are applied promising and novel technique exists which is based on the across them. The response takes ~ 1ms. electrorheological effect present in the electrorheological fluids.
    [Show full text]
  • Dynamical Modelling of the Chain Structure Formation in Electrorheological Fluids
    DYNAMICAL MODELLING OF THE CHAIN STRUCTURE FORMATION IN ELECTRORHEOLOGICAL FLUIDS BIAO WANG , YULAN LIU and ZHONGMIN XIAO School of Mechanical and Production Engineering Nanyang Technological University Nanyang Avenue, Singapore 639798 SUMMARY: An electrorheological fluid consists of a suspension of fine particles in a liquid of low dielectric constant and low viscosity. Its apparent viscosity increases dramatically in the presence of an electric field. Experimental investigations reveal that as the electric field is applied, the depolarized particles form a chain structure along the electric field, and the formation of chains underlies all phenomena of ER fluid. In this paper, the released electromagnetic energy accompanying the growth of the chain was derived first based on a dynamic electromagnetic solution. The released energy, serving as the driving force for the chain formation, should equal to the dissipated energy related with friction resistance of the viscous fluid in the chain formation. In such way, the governing differential equation of the chain growth was established. Based on this energy model, the velocity of the chain forming, and the response time of ER fluid can be predicted. KEYWORDS: ER fluid, Chain formation, Mechanism, Energy approach, Dynamic model INTRODUCTION An electrorheological (ER) fluid consists of a suspension of fine particles in a liquid of low dielectric constant and low viscosity. Its apparent viscosity increases dramatically in the presence of an applied electric field. If the electric field exceeds a critical value, the ER fluid turns into a solid whose yield stress increases as the field is further strengthened. This phenomenon is completely reversible. Upon electric field cutoff, the system immediately resumes its original liquid state.
    [Show full text]
  • Characterization and Testing of an Electrorheological Fluid Valve for Control of ERF Actuators
    Actuators 2015, 4, 135-155; doi:10.3390/act4030135 OPEN ACCESS actuators ISSN 2076-0825 www.mdpi.com/journal/actuators Article Characterization and Testing of an Electrorheological Fluid Valve for Control of ERF Actuators Quang-Anh Nguyen 1;*, Steven Jens Jorgensen 2;*, Joseph Ho 1 and Luis Sentis 2 1 Smart Materials Laboratory, 8/F., Houtex Industrial Building, 16 Hung To Road, Kwun Tong, Kowloon, Hong Kong; E-Mail: [email protected] 2 University of Texas at Austin, Cockrell School of Engineering, 301 E Dean Keeton St, Austin, TX 78712, USA; E-Mail: [email protected] * Authors to whom correspondence should be addressed; E-Mails: [email protected] (Q.-A.N.); [email protected] (S.J.J.); Tel.: +1-310-381-9924 (S.J.J.). Academic Editor: Delbert Tesar Received: 24 April 2015 / Accepted: 23 June 2015 / Published: 26 June 2015 Abstract: Previous studies of electrorheological fluids (ERFs) were motivated by brake, clutch, damping, haptic and resistive applications, but never motivated towards developing an ERF based-hydraulic rotary actuator. One design to make such an actuator is to use ERF-based valves. To fully understand the performance of such an actuator, it is imperative to study ERF valves. For this reason, this paper presents a summary of design considerations for creating ERF-based actuators, an ERF-based valve design for an ERF actuator and a new experimental test-bed to obtain viscosity and yield characteristics of the ERF at flow rates as low as 0.049 L/min, an order of magnitude lower than industrial rheometers. The new test-bed successfully measured the dynamic viscosity of the ERF to be at 0.6 Pa-s for low flow rates and 0.2 Pa-s for higher flow rates.
    [Show full text]
  • Problems on Electrorheological Fluid Flows
    COMMUNICATIONS ON Website: http://AIMsciences.org PURE AND APPLIED ANALYSIS Volume 1, Number 4, October 2002 pp. 1–?? PROBLEMS ON ELECTRORHEOLOGICAL FLUID FLOWS R.H.W. HOPPE AND W.G. LITVINOV RONALD H.W. HOPPE Department of Mathematics University of Houston Houston, TX 77204-3008, USA and Institute of Mathematics University of Augsburg D-86159 Augsburg, Germany WILLIAM G. LITVINOV Institute of Mathematics University of Augsburg D-86159 Augsburg, Germany (Communicated by ???) ABSTRACT. In this paper, we develop and analyze a new model describing electrorhe- ological fluid flow. In contrast to existing models, which assume the electric field to be perpendicular to the velocity field and are thus restricted to simple shear flow and flows close to it, we consider the fluid as anisotropic and introduce a general constitutive rela- tion based on a viscosity function that depends on the shear rate, the electric field strength, and on the angle between the electric and the velocity field. We study general flow prob- lems under nonhomogeneous mixed boundary conditions with given values of velocities and surface forces on different parts of the boundary. We investigate both the case where the viscosity function is continuous and the case where it is singular for vanishing shear rate. In the latter case, the problem reduces to a variational inequality. Using methods of nonlinear analysis such as fixed point theory, monotonicity, and compactness, we establish existence results for the problems under consideration. Some efficient methods for the nu- merical solution of the problems are presented, and numerical results for the simulation of the fluid flow in electrorheological shock absorbers are given.
    [Show full text]
  • A Continuum Mechanics Approach
    Constitutive modeling of an electro-magneto- rheological uid: A continuum mechanics approach Deepak Kumar ( [email protected] ) Maulana Azad National Institute of Technology Bhopal Somnath Sarangi Indian Institute of Technology Patna Research Article Keywords: Fluid Deformation, Clausius-Duhem Inequality, Maxwell's Equations, Representation Theorem, Velocity Proles Posted Date: May 17th, 2021 DOI: https://doi.org/10.21203/rs.3.rs-526496/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Constitutive modeling of an electro-magneto-rheological fluid: A continuum mechanics approach Deepak Kumar1,* and Somnath Sarangi2 1Department of Mechanical Engineering, Maulana Azad National Institute of Technology Bhopal, Madhya Pradesh, India-462003 2Department of Mechanical Engineering, Indian Institute of Technology Patna, India-801103 *[email protected] +these authors contributed equally to this work ABSTRACT The present article deals with a continuum mechanics-based method to model an electro-magneto-rheological (EMR) fluid deformation under an electromagnetic field. The proposed method follows the fundamental laws of physics, including the principles of thermodynamics. We start with the general balance laws for mass, linear momentum, angular momentum, energy, and the second law of thermodynamics in the form of Clausius-Duhem inequality with Maxwell’s equations. Then, we derive the generalized constitutive relation for EMR fluids following the representation theorem. To validate of the same, the developed constitutive relation is applied to an electro-rheological fluid valve system. The analytical predictions of the considered system are consistent with the experimentation. At last, we simulate different velocity profiles from the developed constitutive relation in the case of the parallel plate configuration.
    [Show full text]
  • Enhanced Electrorheological Response of Cellulose: a Double Effect of Modification by Urea-Terminated Silane
    polymers Article Enhanced Electrorheological Response of Cellulose: A Double Effect of Modification by Urea-Terminated Silane Zhao Liu 1, Panpan Chen 1, Xiao Jin 1, Li-Min Wang 1, Ying Dan Liu 1,* and Hyoung Jin Choi 2,* ID 1 State Key Lab of Metastable Materials Science and Technology, College of Materials Science and Engineering, Yanshan University, Qinhuangdao 066004, Hebei, China; [email protected] (Z.L.); [email protected] (P.C.); [email protected] (X.J.); [email protected] (L.-M.W.) 2 Department of Polymer Science and Engineering, Inha University, Incheon 402751, Korea * Correspondence: [email protected] (Y.D.L.); [email protected] (H.J.C.) Received: 30 June 2018; Accepted: 2 August 2018; Published: 4 August 2018 Abstract: As a natural polymer with abundant sources, cellulose was one of the earliest applied electrorheological (ER) materials. However, cellulose-based ER materials have not attracted much attention because of their relatively low ER effect and sensitivity to water. In this study, cellulose rods were decorated with a urea-terminated silane, 1-(3-(trimethoxysilyl) propyl) urea, after being swelled in sodium hydroxide solution. The morphologies and structures of the cellulose particles were investigated using scanning electron microscopy, Fourier-transform infrared spectroscopy and X-ray diffraction, confirming the dramatic differences of the treated cellulose particles from the pristine cellulose. Rheological behaviors of the pristine and modified cellulose particles in silicone oil were observed using a rotational rheometer. It was found that the silane-modified cellulose showed higher ER effect and higher dielectric properties than the pristine cellulose particles, which was not only related to the grafted polar molecules but may also be associated with the porous morphologies of the treated cellulose particles.
    [Show full text]