PCT Gazette, Weekly Issue No. 4, 2005

Total Page:16

File Type:pdf, Size:1020Kb

PCT Gazette, Weekly Issue No. 4, 2005 04/2005 27 Jan/jan 2005 PCT Gazette - Section III - Gazette du PCT 2431 SECTION III WEEKLY INDEXES INDEX HEBDOMADAIRES INTERNATIONAL APPLICATION NUMBERS AND CORRESPONDING INTERNATIONAL PUBLICATION NUMBERS NUMÉROS DES DEMANDES INTERNATIONALES ET NUMÉROS DE PUBLICATION INTERNATIONALE CORRESPONDANTS International International International International International International Application Publication Application Publication Application Publication Numbers Numbers Numbers Numbers Numbers Numbers Numéros des Numéros de Numéros des Numéros de Numéros des Numéros de demandes publication demandes publication demandes publication internationales internationale internationales internationale internationales internationale AT CA CH PCT/AT2004/000215 WO 2005/008704 PCT/CA2004/000866 WO 2005/007235 PCT/CH2004/000294 WO 2005/006883 PCT/AT2004/000234 WO 2005/007650 PCT/CA2004/000923 WO 2005/008516 PCT/CH2004/000362 WO 2005/008183 PCT/AT2004/000247 WO 2005/007580 PCT/CA2004/000993 WO 2005/006888 PCT/CH2004/000384 WO 2005/007991 PCT/AT2004/000248 WO 2005/007899 PCT/CA2004/001003 WO 2005/007184 PCT/CH2004/000388 WO 2005/008874 PCT/AT2004/000258 WO 2005/007417 PCT/CA2004/001007 WO 2005/007189 PCT/CH2004/000408 WO 2005/007618 PCT/AT2004/000259 WO 2005/008115 PCT/CA2004/001012 WO 2005/007004 PCT/CH2004/000419 WO 2005/007381 PCT/AT2004/000260 WO 2005/007990 PCT/CA2004/001026 WO 2005/009051 PCT/CH2004/000446 WO 2005/008606 PCT/AT2004/000261 WO 2005/009092 PCT/CA2004/001027 WO 2005/007793 PCT/CH2004/000447 WO 2005/007329 PCT/AT2004/000262 WO 2005/007945 PCT/CA2004/001029 WO 2005/008288 PCT/CH2004/000451 WO 2005/008059 PCT/CA2004/001032 WO 2005/006974 PCT/CH2004/000452 WO 2005/006897 AU PCT/CA2004/001033 WO 2005/007223 PCT/CH2004/000453 WO 2005/008605 PCT/AU2003/000923 WO 2005/008517 PCT/CA2004/001036 WO 2005/007199 PCT/CH2004/000461 WO 2005/007579 PCT/AU2004/000483 WO 2005/008519 PCT/CA2004/001037 WO 2005/007295 PCT/AU2004/000710 WO 2005/006921 PCT/CA2004/001039 WO 2005/007881 CN PCT/AU2004/000829 WO 2005/006975 PCT/CA2004/001040 WO 2005/007046 PCT/CN2003/000568 WO 2005/009060 PCT/AU2004/000867 WO 2005/006867 PCT/CA2004/001041 WO 2005/008127 PCT/CN2003/000570 WO 2005/008663 PCT/AU2004/000904 WO 2005/008025 PCT/CA2004/001042 WO 2005/008670 PCT/CN2003/000575 WO 2005/009065 PCT/AU2004/000939 WO 2005/007900 PCT/CA2004/001043 WO 2005/008307 PCT/CN2003/000579 WO 2005/007941 PCT/AU2004/000942 WO 2005/006852 PCT/CA2004/001044 WO 2005/008816 PCT/CN2003/000584 WO 2005/009037 PCT/AU2004/000949 WO 2005/007324 PCT/CA2004/001045 WO 2005/007581 PCT/CN2003/000591 WO 2005/008665 PCT/AU2004/000954 WO 2005/008610 PCT/CA2004/001047 WO 2005/007277 PCT/CN2003/000696 WO 2005/007404 PCT/AU2004/000955 WO 2005/007188 PCT/CA2004/001048 WO 2005/007656 PCT/CN2003/000697 WO 2005/007399 PCT/AU2004/000956 WO 2005/006896 PCT/CA2004/001049 WO 2005/007129 PCT/CN2003/000715 WO 2005/007851 PCT/AU2004/000957 WO 2005/007795 PCT/CA2004/001050 WO 2005/007240 PCT/CN2003/000827 WO 2005/007683 PCT/AU2004/000958 WO 2005/007297 PCT/CA2004/001051 WO 2005/007196 PCT/CN2003/000831 WO 2005/007685 PCT/AU2004/000959 WO 2005/007309 PCT/CA2004/001052 WO 2005/007011 PCT/CN2003/000832 WO 2005/007684 PCT/AU2004/000960 WO 2005/007310 PCT/CA2004/001053 WO 2005/007169 PCT/CN2003/000847 WO 2005/007702 PCT/AU2004/000962 WO 2005/007833 PCT/CA2004/001058 WO 2005/007485 PCT/CN2003/001010 WO 2005/008957 PCT/AU2004/000963 WO 2005/007982 PCT/CA2004/001060 WO 2005/008124 PCT/CN2003/001032 WO 2005/008958 PCT/AU2004/000964 WO 2005/008514 PCT/CA2004/001062 WO 2005/008260 PCT/CN2003/001040 WO 2005/008922 PCT/AU2004/000965 WO 2005/007585 PCT/CA2004/001064 WO 2005/008146 PCT/CN2004/000011 WO 2005/008151 PCT/AU2004/000972 WO 2005/008065 PCT/CA2004/001067 WO 2005/007903 PCT/CN2004/000110 WO 2005/008617 PCT/AU2004/000973 WO 2005/007503 PCT/CA2004/001068 WO 2005/007984 PCT/CN2004/000114 WO 2005/008549 PCT/AU2004/000978 WO 2005/007504 PCT/CA2004/001069 WO 2005/008498 PCT/CN2004/000344 WO 2005/007352 PCT/AU2004/000979 WO 2005/007454 PCT/CA2004/001070 WO 2005/008145 PCT/CN2004/000396 WO 2005/007469 PCT/AU2004/000982 WO 2005/008878 PCT/CA2004/001071 WO 2005/008601 PCT/CN2004/000592 WO 2005/008191 PCT/AU2004/000983 WO 2005/009020 PCT/CA2004/001072 WO 2005/008835 PCT/CN2004/000636 WO 2005/007668 PCT/CA2004/001073 WO 2005/008621 PCT/CN2004/000684 WO 2005/007430 BE PCT/CA2004/001074 WO 2005/008508 PCT/CN2004/000716 WO 2005/008064 PCT/BE2003/000127 WO 2005/008680 PCT/CA2004/001076 WO 2005/009085 PCT/CN2004/000748 WO 2005/008990 PCT/BE2004/000093 WO 2005/007765 PCT/CA2004/001080 WO 2005/007985 PCT/CN2004/000763 WO 2005/008991 PCT/BE2004/000105 WO 2005/007183 PCT/CA2004/001083 WO 2005/006842 PCT/CN2004/000807 WO 2005/008697 PCT/BE2004/000106 WO 2005/007325 PCT/CA2004/001086 WO 2005/008819 PCT/CN2004/000809 WO 2005/009038 PCT/CA2004/001087 WO 2005/007771 PCT/CN2004/000815 WO 2005/007059 BR PCT/CA2004/001089 WO 2005/007843 PCT/CN2004/000823 WO 2005/007153 PCT/BR2004/000116 WO 2005/008154 PCT/CN2004/000829 WO 2005/008919 PCT/BR2004/000117 WO 2005/007372 CH PCT/CN2004/000832 WO 2005/007259 PCT/BR2004/000118 WO 2005/007069 PCT/CH2003/000479 WO 2005/008347 PCT/CN2004/000834 WO 2005/008810 PCT/BR2004/000119 WO 2005/007070 PCT/CH2003/000481 WO 2005/008833 PCT/CN2004/000835 WO 2005/008811 PCT/BR2004/000120 WO 2005/008611 PCT/CH2003/000482 WO 2005/007586 PCT/CN2004/000842 WO 2005/007701 PCT/BR2004/000121 WO 2005/008152 PCT/CH2003/000484 WO 2005/008172 PCT/CN2004/000847 WO 2005/008504 PCT/BR2004/000125 WO 2005/007344 PCT/CH2003/000485 WO 2005/007316 PCT/CN2004/000849 WO 2005/008949 PCT/BR2004/000126 WO 2005/008356 PCT/CH2003/000491 WO 2005/007526 PCT/CN2004/000850 WO 2005/008959 PCT/CH2003/000494 WO 2005/007038 CA PCT/CH2003/000495 WO 2005/007040 CZ PCT/CA2003/001085 WO 2005/009028 PCT/CH2003/000496 WO 2005/007041 PCT/CZ2003/000039 WO 2005/007693 PCT/CA2003/001736 WO 2005/007763 PCT/CH2003/000845 WO 2005/008281 PCT/CZ2004/000037 WO 2005/007555 04/2005 2432 PCT Gazette - Section III - Gazette du PCT 27 Jan/jan 2005 International Application Numbers and Corresponding International Publication Numbers (Continued) Numéros des demandes internationales et numéros de publication internationale correspondants (Suite) International International International International International International Application Publication Application Publication Application Publication Numbers Numbers Numbers Numbers Numbers Numbers Numéros des Numéros de Numéros des Numéros de Numéros des Numéros de demandes publication demandes publication demandes publication internationales internationale internationales internationale internationales internationale CZ DE EP PCT/CZ2004/000038 WO 2005/006906 PCT/DE2004/001524 WO 2005/007583 PCT/EP2004/007276 WO 2005/008036 PCT/DE2004/001529 WO 2005/007177 PCT/EP2004/007284 WO 2005/007882 DE PCT/DE2004/001531 WO 2005/008818 PCT/EP2004/007327 WO 2005/006869 PCT/DE2004/001007 WO 2005/008847 PCT/DE2004/001532 WO 2005/008825 PCT/EP2004/007344 WO 2005/007210 PCT/DE2004/001008 WO 2005/008863 PCT/DE2004/001536 WO 2005/008076 PCT/EP2004/007357 WO 2005/007134 PCT/DE2004/001009 WO 2005/007471 PCT/DE2004/001542 WO 2005/007932 PCT/EP2004/007360 WO 2005/008003 PCT/DE2004/001026 WO 2005/008861 PCT/DE2004/001635 WO 2005/007185 PCT/EP2004/007361 WO 2005/007864 PCT/DE2004/001038 WO 2005/008173 PCT/EP2004/007362 WO 2005/008312 PCT/DE2004/001081 WO 2005/007594 DK PCT/EP2004/007365 WO 2005/007327 PCT/DE2004/001094 WO 2005/007285 PCT/DK2004/000491 WO 2005/007669 PCT/EP2004/007369 WO 2005/007461 PCT/DE2004/001145 WO 2005/009094 PCT/DK2004/000506 WO 2005/006907 PCT/EP2004/007373 WO 2005/007319 PCT/DE2004/001146 WO 2005/008270 PCT/DK2004/000507 WO 2005/008013 PCT/EP2004/007383 WO 2005/006983 PCT/DE2004/001148 WO 2005/008896 PCT/DK2004/000510 WO 2005/007261 PCT/EP2004/007390 WO 2005/007617 PCT/DE2004/001149 WO 2005/008682 PCT/DK2004/000680 WO 2005/009072 PCT/EP2004/007391 WO 2005/007722 PCT/DE2004/001150 WO 2005/008772 PCT/EP2004/007394 WO 2005/007012 PCT/DE2004/001163 WO 2005/007306 EC PCT/EP2004/007403 WO 2005/007431 PCT/DE2004/001174 WO 2005/008168 PCT/EC2004/000003 WO 2005/007986 PCT/EP2004/007417 WO 2005/008101 PCT/DE2004/001182 WO 2005/008696 PCT/EP2004/007418 WO 2005/008102 PCT/DE2004/001186 WO 2005/008856 EG PCT/EP2004/007432 WO 2005/007528 PCT/DE2004/001187 WO 2005/009058 PCT/EG2004/000029 WO 2005/009009 PCT/EP2004/007448 WO 2005/007491 PCT/DE2004/001188 WO 2005/008008 PCT/EP2004/007459 WO 2005/008053 PCT/DE2004/001196 WO 2005/008604 EP PCT/EP2004/007461 WO 2005/008141 PCT/DE2004/001203 WO 2005/008279 PCT/EP2003/007511 WO 2005/007481 PCT/EP2004/007462 WO 2005/008190 PCT/DE2004/001216 WO 2005/008081 PCT/EP2003/007714 WO 2005/007980 PCT/EP2004/007466 WO 2005/006851 PCT/DE2004/001217 WO 2005/007921 PCT/EP2004/000375 WO 2005/007975 PCT/EP2004/007475 WO 2005/006931 PCT/DE2004/001218 WO 2005/007333 PCT/EP2004/001027 WO 2005/007042 PCT/EP2004/007477 WO 2005/007300 PCT/DE2004/001219 WO 2005/008087 PCT/EP2004/001028 WO 2005/007044 PCT/EP2004/007493 WO 2005/007227 PCT/DE2004/001220 WO 2005/007917 PCT/EP2004/001510 WO 2005/008693 PCT/EP2004/007494 WO 2005/007487 PCT/DE2004/001221 WO 2005/008048 PCT/EP2004/001924 WO 2005/008872 PCT/EP2004/007497 WO 2005/007474 PCT/DE2004/001224 WO 2005/007393 PCT/EP2004/003876 WO 2005/007458 PCT/EP2004/007499 WO 2005/007450 PCT/DE2004/001227 WO 2005/007334 PCT/EP2004/004316 WO 2005/008265 PCT/EP2004/007500 WO 2005/007443 PCT/DE2004/001235 WO 2005/007946 PCT/EP2004/004783 WO 2005/008857 PCT/EP2004/007518 WO 2005/007296 PCT/DE2004/001266 WO 2005/008205 PCT/EP2004/005017 WO 2005/008072 PCT/EP2004/007519 WO 2005/006998 PCT/DE2004/001270
Recommended publications
  • The Applicability of the Standard DIN EN ISO 3690 for the Analysis of Diffusible Hydrogen Content in Underwater Wet Welding
    materials Article The Applicability of the Standard DIN EN ISO 3690 for the Analysis of Diffusible Hydrogen Content in Underwater Wet Welding Jan Klett * , Thomas Wolf, Hans Jürgen Maier and Thomas Hassel Institut für Werkstoffkunde (Materials Science), Leibniz Universität Hannover, An der Universität 2, 30823 Garbsen, Germany; [email protected] (T.W.); [email protected] (H.J.M.); [email protected] (T.H.) * Correspondence: [email protected]; Tel.: +49-511-762-4335 Received: 23 July 2020; Accepted: 20 August 2020; Published: 25 August 2020 Abstract: The European standard ISO 3690 regulates the measurement of diffusible hydrogen in arc-welded metal. It was designed for different welding methods performed in dry atmosphere (20% humidity). Some details of the standard are not applicable for wet underwater welding. The objective of this study was to extend the applicability of DIN EN ISO 3690:2018-12 to underwater wet-shielded metal arc welding (SMAW). Four different aspects regulated within the standard were accounted for: (1) sample dimensions and number of samples taken simultaneously; (2) time limitations defined by the standard regarding the welding and the cleaning process; (3) time, temperature, and method defined for analysis of the diffusible hydrogen content; (4) normalization of the hydrogen concentration measured. Underwater wet welding was performed using an automated, arc voltage-controlled welding machine. The results are discussed in light of standard DIN EN ISO 3690, and recommendations are provided for the analysis of diffusible hydrogen content upon underwater wet welding. Keywords: diffusible hydrogen; SMAW; underwater wet welding; DIN EN ISO 3690; AWS A4.3; JIS Z 3113 1.
    [Show full text]
  • Exhibitor List / Ausstellerlist (August 2021)
    Exhibitor List / Ausstellerlist (August 2021) 1960 Seravesi 1A STAR Technische Kunststoffe GmbH Italy, Hall 11 Stand F166 Germany, Hall 11 Stand J74 3M DEUTSCHLAND GmbH 3R Technics GmbH Germany, Hall 26 Stand J72 Switzerland, Hall 11 Stand B08 5Cube.digital GmbH A.B. Esse SpA Germany, Hall 13 Stand E125 Italy, Hall 12 Stand B35 AAG Basinçli Hava Sistemleri Aage Østergaard A/S San.Tic.Ltd.Sti Denmark, Hall 17 Stand A102 Turkey, Hall 15 Stand E23 Abacus Maschinenbau GmbH ABE Industrietechnik GmbH Germany, Hall 27 Stand M70 Germany, Hall 26 Stand E91 ABO Building Materials (Kunshan) Co.,Ltd ABRASIVI ALPE S.R.L. China, Hall 17 Stand H51 Italy, Hall 26 Stand B80 Accademia della piegatura Srl Acciaieria Arvedi S.p.A. Italy, Hall 14 Stand L10 Italy, Hall 17 Stand E58 ACCURL CNC Machine Tools (Anhui) Co., ACF Engineering & Automation GmbH LTD Austria, Hall 26 Stand E20 China, Hall 16 Stand H12 Achim Pellen Dichtungstechnik GmbH ADIGE SPA Germany, Hall 17 Stand D126 Italy, Hall 12 Stand D118 ADIGE SPA ADIRA - Metal Forming Solutions S.A. Italy, Hall 13 Stand E182 Portugal, Hall 12 Stand D66 AERO-LIFT Vakuumtechnik GmbH AGAB Pressautomation AB Germany, Hall 16 Stand J33 Sweden, Hall 27 Stand D52 AGTOS GmbH AICHELIN Holding GmbH Germany, Hall 26 Stand C20 Austria, Hall 27 Stand J02 AIDA Air Liquide Deutschland GmbH Italy, Hall 27 Stand E52 Germany, Hall 26 Stand E55 Airco SystemDruckluft GmbH AJAN ELEKTRONIK SERV. SAN. VE TIC. LTD. STI Germany, Hall 11 Stand A106 Turkey, Hall 13 Stand B52 AKTEKNIK AKYAPAK ULUSLARARASI DIS.
    [Show full text]
  • EU Top Applicants 2010-2014 Based on Assignees2014 5Yr.Tsv
    EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv table_row ordering_cd 15943 309 13406 105 13407 105 13408 105 13409 105 13410 105 13411 105 13412 105 13413 105 13414 105 13415 105 13416 105 13417 105 13418 105 13419 105 13420 105 13421 105 13422 105 13423 105 13424 105 Page 1 of 1235 09/26/2021 EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv st_country_cd us_or_foreign FRX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) Page 2 of 1235 09/26/2021 EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv state_country_of_origin assignee_name FRANCE IMERJ, LTD. AUSTRIA INFINEON TECHNOLOGIES AG AUSTRIA ~INDIVIDUALLY OWNED PATENT AUSTRIA AMS AG AUSTRIA NXP B.V. AUSTRIA JULIUS BLUM GMBH AUSTRIA BAXTER INTERNATIONAL INC. AUSTRIA EPCOS AG AUSTRIA INFINEON TECHNOLOGIES AUSTRIA AG AUSTRIA MED-EL ELEKTROMEDIZINISCHE GERAETE GMBH AUSTRIA SIEMENS AKTIENGESELLSCHAFT AUSTRIA AVL LIST GMBH AUSTRIA MAGNA POWERTRAIN AG & CO KG AUSTRIA HILTI AKTIENGESELLSCHAFT AUSTRIA BOEHRINGER INGELHEIM INTERNATIONAL GMBH AUSTRIA FRONIUS INTERNATIONAL GMBH AUSTRIA SIEMENS VAI METALS TECHNOLOGIES GMBH AUSTRIA CONTINENTAL AUTOMOTIVE GMBH AUSTRIA INTEL MOBILE COMMUNICATIONS GMBH AUSTRIA MAGNA STEYR FAHRZEUGTECHNIK AG & CO. KG Page 3 of 1235 09/26/2021 EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv CY_2010 CY_2011
    [Show full text]
  • Approved Welding Consumables for Use in Ship Construction
    APPROVED WELDING CONSUMABLES FOR USE IN SHIP CONSTRUCTION CONTENTS Introduction Explanatory Notes And Abbreviations Higher Strength Steel Index Of Companies With Approved Consumables Approval Lists By Section Number: 3 Manual And Gravity Welding 4 Submerged Arc Welding 5 Gas Shielded And Self Shielded Metal Arc Welding 6 Electroslag And Electrogas Welding 7 One-Side Welding With Temporary Backing 8 Stainless Steel Consumables 9 Aluminium Alloy Consumables © Lloyds Register of Shipping September 2000 INTRODUCTION These notes are specific to this edition of the publication and changes have been made for consistency with the 1999 edition of the Rules and Regulations for the Classification of Ships, Part 2, “Rules for the Manufacture, Testing and Certification of Materials”, hereafter referred to as the Materials Rules. The welding consumables and consumable combinations listed have complied with the approval requirements set out in the relevant Sections of Chapter 11 of the Materials Rules. The consumables are retained in these lists subject to satisfactory annual tests made in accordance with the Materials Rules, the results of which are reported to the Head Office of Lloyd's Register. Further information may be found in the Materials and Qualification Procedures for Ships, Book J, Procedures for Approval of Welding Consumables and Manufacture of Fabricated Steel Sections. The responsibility for compliance with national or other standards indicated by labelling or implied by the trade name rests with the Manufacturer. It should be noted that unaccountable delays in the receipt of satisfactory annual test results will lead to deletion from the approved list. The Sections are numbered in accordance with the numbering of the respective Sections of the Materials Rules, Chapter 11, namely: Section 3: Consumables for Manual and Gravity Metal Arc Welding of Steels.
    [Show full text]
  • STEEL and METAL INDUSTRY in the Capital Region Berlin-Brandenburg
    STEEL AND METAL INDUSTRY in the Capital Region Berlin-Brandenburg THE GERMAN CAPITAL REGION excellence in metal 2 Steel and metal industry Helsinki 1,630 km Oslo 1,030 km Tallinn Stockholm 1,540 km Moscow 1,080 km 1,830 km Steel and metal industry Riga 1,250 km Copenhagen Vilnius in Berlin-Brandenburg Dublin London 440 km 1,050 km 1,090 km Minsk 1,680 km Amsterdam Berlin 1,120 km 630 km Potsdam Warsaw 580 km The steel and metal industry is among Brussels Kiev the industrial sectors with the largest 740 km Prague Paris 360 km 1,350 km numbers of employees and highest 1,000 km sales figures in the German Capital Vienna 690 km Region Berlin-Brandenburg. Bern Budapest Bucharest 890 km In the State of Brandenburg alone, 930 km 1,700 km Madrid about 38,500 employees work at 2,300 km Istanbul 2,600 enterprises in this sector. 2,220 km They are primarily medium-sized Lisbon Rome 2,750 km 1,480 km businesses, including a large number of market-leading suppliers who work Athens with final producers in the fields 2,360 km of automotive engineering, energy technology and the electrical, Dedicated skilled workers available rail transportation and aerospace industries. A number of major international corporations also The Capital Region has the highest percentage of highly qua- operate in the region. lified skilled workers of any area in Germany. About 40,000 university graduates enter the labor market here each year. The German Capital Region is also home to a broad range of From metal production to final producers institutions offering training and continuing education oppor- tunities for industry-specific professions.
    [Show full text]
  • Knowledge Creation and Innovation Beyond Agglomeration: the Case of Hidden Champions in Germany
    Knowledge creation and innovation beyond agglomeration: The case of Hidden Champions in Germany Von der Fakultät für Physik und Geowissenschaften der Universität Leipzig genehmigte D I S S E R T A T I O N zur Erlangung des akademischen Grades doctor philosophiae Dr. phil. vorgelegt von M.A. Lukas Vonnahme geboren am 12.04.1987 in Salzkotten Gutachter: Dr. Thilo Lang, Universität Leipzig und Leibniz-Institut für Länderkunde Prof. Dr. Reinhard Wießner, Universität Leipzig Tag der Verleihung: 19. Juli 2021 Bibliographische Beschreibung Vonnahme, Lukas Knowledge creation and innovation beyond agglomeration: The case of Hidden Champions in Germany Universität Leipzig, Dissertation 236 Seiten, 295 Literaturangaben, 31 Abbildungen, 32 Tabellen, 2 Anlagen Referat Diese Dissertation bezieht sich auf ein Schlüsselthema der Wirtschaftsgeographie: das Verhältnis zwischen Innovation und Raum. Während vielfältige Belege für die Vorteile von Agglomerationen für Innovation existieren, werden periphere Regionen und ihre Akteure in theoretischen und empirischen Arbeiten nicht ausreichend berücksichtigt. Aufbauend auf zunehmende Kritik an Stadt-zentrierten Ansätzen und der Rolle, die geographischer Nähe zugeschrieben wird, zielt diese Forschung darauf ab, die Merkmale und Hauptfaktoren von Innovation außerhalb von Agglomerationen zu identifizieren und nachzuvollziehen, inwiefern sich diese von denen innerhalb von Agglomerationen unterscheiden. Dazu werden die Innovationsaktivitäten von Hidden Champions in Deutschland empirisch untersucht. Auf Grundlage
    [Show full text]
  • About the Contributors
    534 About the Contributors Raimund Ubar is a professor of computer engineering at Tallinn Technical University and the head of Centre of Excellence for Integrated Electronic Systems and Biomedical Engineering in Estonia. R. Ubar received his PhD degree in 1971 at the Bauman Technical University in Moscow. His main rese- arch interests include computer science, electronics design, digital test, diagnostics and fault-tolerance. He has published more than 250 papers and three books, lectured as a visiting professor in more than 25 universities in about 10 countries, and served as a General Chairman for 10th European Test Con- ference, NORCHIP, BEC, EWDTC. He is a member of Estonian Academy of Sciences, Golden Core member of IEEE Computer Society and honorary professor of National University of Radioelectronics Charkiv (Ukraine). He was a chairman of Estonian Science Foundation, and a member of the Academic Advisory Board of the Estonian President. Jaan Raik received his M.Sc. and Ph.D. degrees in Computer Engineering from Tallinn University of Technology (TUT) in 1997 and in 2001, respectively. Since 2002 he holds a position of senior research fellow at TUT. He is a member of IEEE Computer Society, a Steering Committee member of European Dependable Computing Conference and Programme Committee member for many leading conferences (DATE, ETS, DDECS, etc.). Dr. Raik has co-authored more than 100 scientific publications. In 2004, he was awarded the national Young Scientist Award. In 2005, he served as the Organisation Chair of the IEEE European Test Symposium. He has carried out research work at several foreign institutes inclu- ding Darmstadt University of Technology, INPG Grenoble, Nara Institute of Science and Technology (Japan), Fraunhofer Institute of Integrated Circuits (Dresden), University of Stuttgart and University of Verona.
    [Show full text]
  • S&S Katalog 07
    SVARKA, REZKA, NAPLAVKA 2007 MeΩdunarodnaä specializirovannaä vystavka £Svarka, rezka, naplavka” Москва/Россия, 28 – 31 мая 2007 Выставочный комплекс “ЗАО ЭКСПОЦЕНТР“ на Красной Пресне, Павильон 7.1, 7.2 SCHWEISSEN&SCHNEIDEN RUSSIA 2007 International Trade Fair Joining · Cutting · Surfacing Moscow/Russia May 28 – 31, 2007 Krasnaya Presnya Expocentr Fairgrounds Pav. 7.1, 7.2 Устроители/Organizers: Messe Düsseldorf GmbH Messe Essen GmbH P.O. Box 10 10 06 ОOО Мессе Дюссельдорф Москва P.O. Box 100165 D-40001 Düsseldorf Краснопресненская наб., 14 D–45001 Essen, Germany Germany строение 2, павильон 7 Phone: +49(0)2 11/45 60-01 Phone: +49/2 01/72 44-0 123 100 Москва Fax: +49(0)2 11/45 60-77 40 Phone: +7/495/205 00 00 Fax: +49/2 01/72 44-448 www.messe-duesseldorf.de Fax: +7/495/2 55 27 71 [email protected] [email protected] www.messe-duesseldorf.ru www.messe-essen.de [email protected] При содействии/In co-operation with: SCHWEISSEN & SCHNEIDEN RUSSIA 2007 1 Д-р Вольфганг Райнигер мэр города Эссена, председатель Наблюдательного совета фирмы «Messe Essen» Выставка «Сварка и резка Россия» впервые дает возможность фирмам, деятельность которых связана со сваркой, резкой и родственными процессами, представить свои продукты и услуги на чрезвычайно интересном и быстро растущем рынке России. Мы сердечно приветствуем экспонентов и посетителей на премьере этой выставки в Экспоцентре на Красной Пресне. Все добрые предзнаменования для успеха выставки налицо: спрос на сварочные технологии в России постоянно возрастает, как и потребность в информации о современных технологиях. Поэтому на выставке «Сварка и резка Россия» главное внимание будет уделено новейшим продуктам и процессам, а также установлению и углублению деловых контактов.
    [Show full text]
  • Экспоненты Из Саксонии Companies from Saxony
    Экспоненты из Саксонии Companies from Saxony МЕТАЛЛООБРАБОТКА 2019 27 - 31 мая 2019г. Центральный выставочный комплекс »Экспоцентр«, Россия, г. Москва Зал 2.2, стенд Б31 International Exhibition METALLOOBRABOTKA 2019 May 27 - 31, 2019 Central Exhibition Complex »Expocentr« Russia, Moscow Hall 2.2, Stand B31 ВВЕДЕНИЕ Машиностроение и строительство установок в Саксонии Саксония – это колыбель немецкого машиностроения. Уже около 200 лет станки и оборудование из Саксонии пользуются заслуженной популярностью во всем мире. В секторе машиностроения занято около 45 тысяч сотрудников на примерно 1 тысяче заводов и сектор характеризуется самым высоким экспортным показателем саксонской промышленности. Доля машиностроения в Саксонии составляет примерно 14 % всего промышленного товарооборота и 17 % экспорта. Мировые концерны, как, например, «NILES-SIMMONS HEGENSCHEIDT» имеют свою штаб-квартиру в Саксонии или действуют на мировом рынке, как, например, «Starrag» или «Koenig & Bauer», с крупным производством в Саксонии. Самая старейшая существующая станкостроительная компания в Германии – «UNION Werkzeugmaschinen GmbH Chemnitz» - является ведущим производителем горизонтально-расточных станков и обрабатывающих центров. Большинство саксонских машиностроительных компаний относятся к средним и малым предприятиям и являются успешными инноваторами в области ресурсосберегающего производства и процессов для изготовления новых материалов для применения в машиностроении. 2 | INTRODUCTION MACHINE! – Mechanical Engineering and Plant Construction in Saxony Saxony is considered to be the cradle of German machine construction. For more than 200 years now, machinery made in Saxony has enjoyed a superb reputation around the globe. The branch with about 45,000 employees in approx. 1,000 companies accounts for almost 14 percent of the industrial turnover and 17 percent of the export turnover generated in Saxony. Global corporations like NILES-SIMMONS HEGENSCHEIDT have their headquarters in Saxony or are active on the global market from a strong base located here like Starrag or Koenig & Bauer.
    [Show full text]
  • Virtuelle Schweißtrainersysteme Für Die Ausbildung
    01 WELDING AND CUTTING TODAY Donnerstag / Thursday, 28.9.2017 www.welding-and-cutting-today.info Düsseldorf, 28.09. 2017 / Nr. 4 • No. 4 Täglich erscheinende offizielle Messezeitung • Official daily fair newspaper Halle 15 – Stand D25 Virtuelle Schweißtrainersysteme für die Ausbildung Die Hersteller der drei führenden Schweißtrainersys- lator bietet sowohl dem Schweißanfänger als auch teme „Soldamatic“ (Seabery), „Virtual Welder“ (Froni- dem Experten die Möglichkeit, effektiv und risikolos us) und „GSI-SLV Schweißtrainer“ (SLV Halle) stellen Trainingseinheiten zu absolvieren. Einen etwas ande- auf dem Messestand des DVS – Deutscher Verband ren Ansatz verfolgt der GSI-SLV Schweißtrainer. Hier für Schweißen und verwandte Verfahren e. V. in Hal- wird mit einem echten Lichtbogen niedriger Intensität le 15 ihre Virtual Welding Training Systems (VWTS) trainiert, es wird das gleiche Equipment wie in der vor. Jeder Interessierte kann während der Messe an Schweißerkabine verwendet. Die Bewegungsabläufe diesen Systemen problemlos selbst das Schweißen des Schweißers und die Lichtbogenparameter wer- ausprobieren. den aufgezeichnet und ausgewertet. Die Firma Seabery stellt hier auf der Messe die neu- In einer Zeit, in der die Entwicklung der Digitalisierung este Generation ihres Virtual Reality-Systems Solda- weit fortgeschritten ist, werden digitale Ressourcen matic vor. Die Hardware und Software wurden weiter zunehmend auch als Werkzeuge auf dem Bildungs- entwickelt, um ein perfekt realistisches Schweißerleb- sektor genutzt. Beispielsweise gehören Begriffe wie nis zu vermitteln. Das Gerät hat „look and feel“ einer „E-Learning“ oder „Virtuelles Training“ schon zum Schweißstromquelle, der Übende schweißt mit einem alltäglichen Sprachgebrauch, weil in zahlreichen Bil- handelsüblichen Brenner und verwendet eine für VR dungsbereichen diese modernen Lehrmethoden inte- angepasste ergonomische Schweißmaske.
    [Show full text]
  • Recueil-Brevets-2018-12.Pdf
    2018/12 RECUEIL DES VERZAMELING VAN DE Brevets d’invention Uitvindingsoctrooien MAI 2018 (Partie 2 : 08/05 – 15/05) MEI 2018 (Deel 2 : 08/05 – 15/05) SAMMLUNG DER BULLETIN OF Erfindungspatente Patents MAI 2018 (Teil 2 : 08/05 – 15/05) MAY 2018 (Part 2 : 08/05 – 15/05) Numéro d'entreprise : 0314.595.348 Ondernemingsnummer : 0314.595.348 2 Introduction Inleiding Le Recueil des brevets d'invention apparaît De Verzameling der uitvindingsoctrooien verschijnt deux fois par mois et uniquement sous forme tweemaal per maand en alleen in elektronische électronique. Chaque édition du Recueil des vorm. Elke uitgave van de Verzameling der brevets d'invention comprend 15 rubriques. uitvindingsoctrooien bestaat uit 15 rubrieken. Deze Ces rubriques contiennent des données rubrieken bevatten bibliografische gegevens over bibliographiques relatives aux (demandes de) Belgische octrooi(en) (aanvragen), Europese brevet(s) belge(s), (demandes de) brevet(s) octrooi(en) (aanvragen) met aanduiding van européen(s) désignant la Belgique et (demandes België en (aanvragen van) Belgische aanvullende de) certificat(s) complémentaire(s) de protection beschermingscertificaten voor geneesmiddelen belge(s) pour des médicaments ou des produits of gewasbeschermingsmiddelen. De Verzameling phytopharmaceutiques. Le Recueil des brevets der uitvindingsoctrooien kan gratis geraadpleegd d'invention peut être consulté gratuitement sur le worden op de internetsite van de Federale site internet du Service Public Fédéral Economie. Overheidsdienst Economie. Einleitung Introduction Die Sammlung der Erfindungspatente erscheint The Bulletin of patents appears twice per month zweimal im Monat und nur in elektronischer and only in an electronic version. Each issue of Form. Jede Ausgabe der Sammlung der the Bulletin of patents consists of 15 headings.
    [Show full text]
  • Supporting the Clean Energy Transition of Coal-Intensive EU Regions
    DeCarb – Supporting the clean energy transition of coal-intensive EU regions Final Report Reference case study and SWOT analysis identifying the most advantageous growth areas in relation to the existing workforce and territorial specificities in order to create alternative to coal-driven activities NORDJYLLAND Jyllandsgade 1 DK–9520 Skørping Tel. +45 9682 0400 NORDJYLLAND MIDTJYLLAND Jyllandsgade 1 Vestergade 48 H, 2. sal DKDK 8000–9520 Århus Skørping C Tel. +45 9682 0400 Fax +45 9839 2498 SJÆLLAND MIDTJYLLAND Postadresse: A.C.Vestergade Meyers Vænge48 H, 2. 15 sal DKDK 2450–8000 København Århus C SV SJÆLLAND www.planenergi.dkA.C. Meyers Vænge 15 [email protected] København SV th CVR: 7403 8212 28 May, www.planenergi.dk 2019 [email protected] CVR: 7403 8212 Table of Content The report created by PlanEnergi Nordjyland 1 Executive summary 5 Per Alex Sørensen 2 Glossary 12 Nordjylland 3 Introduction 14 Mobil +45 4058 2498 [email protected] 4 Present situation (Reference case) 17 4.1 Energy demand, coal consumption and efficiency potential Magda Kowalska Nordjylland related to coal fuel 18 Mobil +45 2266 9219 4.1.1 Bulgaria – Yugoiztochen region 18 [email protected] 4.1.2 Denmark – Nordjylland region (example) 22 Internal project ref.: 19-008 4.1.3 Germany –Lausitz-Spreewald region 25 4.1.4 Greece – Western Macedonia region 29 4.1.5 Hungary – Észak-Alföld region 33 4.1.6 Poland – Lodzkie region 36 Customer 4.1.7 Romania – South-West Oltenia region 39 House of Energy 4.1.8 Slovenia – Savinjska region 44 Boulevarden 13
    [Show full text]