ETG Newsletter December 2016 | #27

Total Page:16

File Type:pdf, Size:1020Kb

ETG Newsletter December 2016 | #27 ETG Newsletter December 2016 | #27 Power and Communication combined. © EtherCAT Technology Group EtherCAT Technology Group Phone: +49 911 54056 20 Website: www.ethercat.org Headquarters: Ostendstr. 196 Fax: +49 911 54056 29 Email: [email protected] D-90482 Nuremberg, Germany For other ETG offices see website All trademarks acknowledged. Page | 1 Dec 2016 | ETG Newsletter #27 Dear Members, 1 MEMBER #4000 The launch of EtherCAT P, the official breakthrough in the automotive industry, ADOPTION RATES further accelerated growth worldwide - what an exciting year for EtherCAT! 2 ORGANISATION EtherCAT P has definitely been the CONTENT CONTENT EVENTS technology highlight: the first version of EDITORIAL EDITORIAL 3 ETHERCAT P the specifications and a detailed 4 JOINT BOOTH REVIEW application note have been published. Everyone is now encouraged to implement 5 TECHNICAL this cost saving combination of power and CONFORMANCE data on the same cable. 6 NEW MEMBERS May all of you have a relaxing holiday season with your loved ones, and a great start into another exciting EtherCAT year 2017! Further Information Merry Christmas and with best regards on behalf of the entire ETG team, www.ethercat.org Martin Rostan, ETG Executive Director Member #4000 honored: KOCH Pac-Systeme GmbH The EtherCAT Technology Group (ETG) has reached another membership milestone: Recently, the ETG welcomed its 4,000th member into the organization. The official tribute to KOCH Pac-Systeme GmbH, a supplier of advanced packaging machinery equipped with EtherCAT and EtherCAT P, took place in the frame of the SPS IPC MEMBERSHIP Drives 2016 trade fair in Nuremberg, Germany. KOCH Pac-Systeme stands for the highest quality and most efficient custom packaging solutions. For over 40 years, KOCH has impressed customers at home and overseas with the quality of their products and services, their expertise and employees commitment. www.ethercat.org/member4000 Full Press Release (EN | DE | CN | JP) Jürgen Welker, Divisional Director of Control System and Service KOCH PacSysteme GmbH EtherCAT Adoption Rate: Vendors Playing with figures (Vol. 3) EtherCAT is wide spread in different markets as well as ETG has more than 4000 members from 65 countries and countries. Please have a look at the following impressive 6 continents. EtherCAT is implemented on 34 different OS figures (changes since last newsletter): and over 800 products are listed in the official EtherCAT Product Guide. There are 30 different Safety over EtherCAT EtherCAT Drive Vendors + 17 vendors and 47 sensor/actor manufacturers. ETG has 163 organized 40 EtherCAT Plug Fests so far. ETG booths were 196 EtherCAT Master Vendors + 10 shown at 120 tradeshows and EtherCAT roadshows took place in more than 30 different countries and over + 6 108 EtherCAT I/O Vendors 80 cities. Over 500 new members joined the ETG in 2016. EtherCAT Technology Group Phone: +49 911 54056 20 Website: www.ethercat.org Headquarters: Ostendstr. 196 Fax: +49 911 54056 29 Email: [email protected] D-90482 Nuremberg, Germany For other ETG offices see website All trademarks acknowledged. Page | 2 Dec 2016 | ETG Newsletter #27 Membership Development Success of EtherCAT in China increases furthermore continues During the last year the ETG has constantly grown and, The EtherCAT Technology Group (ETG) reaches another as of December 2016, counts 4.075 members from 65 milestone, breaking the 500 member level in China. countries and 6 continents; ETG continues to be the The EtherCAT Technology Group (ETG), headquartered in world’s largest fieldbus organization, and a truly global Nuremberg, Germany was founded in 2003 and has since ORGANISATION ORGANISATION organization as well. grown into a global phenomenon. Today, the ETG maintains Looking back ETG has grown constantly: in 2008, there was regional offices in four other countries. One such country is 1 new member every business day, in 2013 there was 1 new China where Beryl Fan, manager of the local ETG office in member every calendar day and in 2016, ETG exceeded the Beijing, and her team promote EtherCAT technology while number of 500 new members per year. ETG continues to supporting implementation in the Chinese market. In these be the world’s largest fieldbus organization with 558 areas, they have become wildly successful: When the ETG members in America (+72), 1,515 members in Asia (+260), China Office was founded in 2007, there were fewer than 10 and 1,894 members in Europe (+190). member companies. Now, the People’s Republic of China has www.ethercat.org/members broken the 500 member barrier. Press Release (EN | DE | CN) Industrial Ethernet Seminar Series ETG @ LinkedIn, Twitter & worldwide extended YouTube! EVENTS In 2016, ETG successfully continued its seminar series Join our several social media channels to stay up-to-date activities all over the world: China, Japan, India, UAE, and receive the latest news immediately. Qatar, Vietnam, Indonesia, Singapore, Australia, We’ll invite all of you to follow our official ETG accounts at the New Zealand, Canada, France, South Africa, USA, Canada, following social media channels. You will find actual news Korea, Taiwan and Brazil. from ETG tradeshows or roadshows, announcements of Our EtherCAT seminars receive outstanding feedback: as a upcoming events, impressions and much more there! general rule over 80% of the attendees give an “excellent” www.twitter.com/EtherCAT_Group rating, with another 15% “good” ratings. Participants www.linkedin.com/company/ethercat-technology-group appreciate the rich technical content and the focus on how to www.youtube.com/user/EtherCATGroup benefit from EtherCAT in practice, which helps them to successfully integrate the technology in their next project. Further seminar series / roadshows are planned for 2017! Watch out for the call for sponsors distributed via Email. EtherCAT Technology Group Phone: +49 911 54056 20 Website: www.ethercat.org Headquarters: Ostendstr. 196 Fax: +49 911 54056 29 Email: [email protected] D-90482 Nuremberg, Germany For other ETG offices see website All trademarks acknowledged. Page | 3 Dec 2016 | ETG Newsletter #27 EtherCAT P: Interview with Florian Hammel What is EtherCAT P actually? Which role does ETG play in this game? Florian Hammel: “EtherCAT P is an addition to the EtherCAT “Since our Technical Committee accepted EtherCAT P as technology on the physical layer. P stands for power and addition to EtherCAT last April a lot has happened. All ETHERCAT P ETHERCAT enables the user to transmit the current via two electrically necessary documents and information to start with the isolated 24V supplies on the Ethernet cable. EtherCAT P is implementation of EtherCAT P are available for our members 100% EtherCAT – and adds the power transmission on the very and are expanded, developed, and enhanced by us same cable. Licensing is free of charge.” continuously. When it comes to EtherCAT P our members can In brief: What are the advantages of EtherCAT P and who count on the support of our team – can benefit from it? the same way they are used to with EtherCAT.” “Using EtherCAT P leads to reduced cabling and lower system costs. Potential error sources while connecting devices are www.ethercat.org/EtherCATP reduced, too: M8 connectors specially designed for EtherCAT P make false connections practically impossible. Substantially it Florian Hammel is EtherCAT and depends on the individual use case and the according EtherCAT P specialist, working at the requirements to implement this technology. EtherCAT P is ETG Headquarters and also chairs the especially interesting for machine parts which now can be ETG Technical Working Group Device & supplied with data and power via one single cable.” Network Description. ETG publishes official Toyota Motor Corporation specification documents selects EtherCAT As announced at the Hannover Messe 2016, we've recently Toyota Motor Corporation has selected EtherCAT as its published the draft version of the official EtherCAT P Industrial Ethernet technology of choice and will base Technology specification, together with the extension of its new factories around the world on EtherCAT. all corresponding documents. The global announcement was made by Morihiko Ohkura, In addition, a comprehensive and detailed application note General Manager of the Production Engineering Innovation has been published to further support EtherCAT Division at Toyota Motor Corporation during an EtherCAT implementation on the doing-level. Technology Group (ETG) press briefing at Hannover Messe www.ethercat.org/EtherCATP 2016. The decision to standardize on EtherCAT also factors in the latest addition to the technology, EtherCAT P. Press Release (EN | DE | CN | JP) Press Release (EN | DE | JP | CN) Video: www.youtube.com EtherCAT Slave Implementation Guide includes The ETG.2200 EtherCAT Slave Implementation Guide V3.0 has been enhanced by a separate section addressing EtherCAT P implementation matters. EtherCAT P is an enhancement of the EtherCAT technology and combines EtherCAT and power on the same 4 wires. The new section of the reference for EtherCAT Slave Implementation gives an overview of the EtherCAT P technology, including all related implementation topics and documents. www.ethercat.org/ETG2200 EtherCAT Technology Group Phone: +49 911 54056 20 Website: www.ethercat.org Headquarters: Ostendstr. 196 Fax: +49 911 54056 29 Email: [email protected] D-90482 Nuremberg, Germany For other ETG offices see website All trademarks acknowledged. Page | 4 Dec 2016 | ETG Newsletter #27 ETG Joint Booth at SPS IPC
Recommended publications
  • The Applicability of the Standard DIN EN ISO 3690 for the Analysis of Diffusible Hydrogen Content in Underwater Wet Welding
    materials Article The Applicability of the Standard DIN EN ISO 3690 for the Analysis of Diffusible Hydrogen Content in Underwater Wet Welding Jan Klett * , Thomas Wolf, Hans Jürgen Maier and Thomas Hassel Institut für Werkstoffkunde (Materials Science), Leibniz Universität Hannover, An der Universität 2, 30823 Garbsen, Germany; [email protected] (T.W.); [email protected] (H.J.M.); [email protected] (T.H.) * Correspondence: [email protected]; Tel.: +49-511-762-4335 Received: 23 July 2020; Accepted: 20 August 2020; Published: 25 August 2020 Abstract: The European standard ISO 3690 regulates the measurement of diffusible hydrogen in arc-welded metal. It was designed for different welding methods performed in dry atmosphere (20% humidity). Some details of the standard are not applicable for wet underwater welding. The objective of this study was to extend the applicability of DIN EN ISO 3690:2018-12 to underwater wet-shielded metal arc welding (SMAW). Four different aspects regulated within the standard were accounted for: (1) sample dimensions and number of samples taken simultaneously; (2) time limitations defined by the standard regarding the welding and the cleaning process; (3) time, temperature, and method defined for analysis of the diffusible hydrogen content; (4) normalization of the hydrogen concentration measured. Underwater wet welding was performed using an automated, arc voltage-controlled welding machine. The results are discussed in light of standard DIN EN ISO 3690, and recommendations are provided for the analysis of diffusible hydrogen content upon underwater wet welding. Keywords: diffusible hydrogen; SMAW; underwater wet welding; DIN EN ISO 3690; AWS A4.3; JIS Z 3113 1.
    [Show full text]
  • Exhibitor List / Ausstellerlist (August 2021)
    Exhibitor List / Ausstellerlist (August 2021) 1960 Seravesi 1A STAR Technische Kunststoffe GmbH Italy, Hall 11 Stand F166 Germany, Hall 11 Stand J74 3M DEUTSCHLAND GmbH 3R Technics GmbH Germany, Hall 26 Stand J72 Switzerland, Hall 11 Stand B08 5Cube.digital GmbH A.B. Esse SpA Germany, Hall 13 Stand E125 Italy, Hall 12 Stand B35 AAG Basinçli Hava Sistemleri Aage Østergaard A/S San.Tic.Ltd.Sti Denmark, Hall 17 Stand A102 Turkey, Hall 15 Stand E23 Abacus Maschinenbau GmbH ABE Industrietechnik GmbH Germany, Hall 27 Stand M70 Germany, Hall 26 Stand E91 ABO Building Materials (Kunshan) Co.,Ltd ABRASIVI ALPE S.R.L. China, Hall 17 Stand H51 Italy, Hall 26 Stand B80 Accademia della piegatura Srl Acciaieria Arvedi S.p.A. Italy, Hall 14 Stand L10 Italy, Hall 17 Stand E58 ACCURL CNC Machine Tools (Anhui) Co., ACF Engineering & Automation GmbH LTD Austria, Hall 26 Stand E20 China, Hall 16 Stand H12 Achim Pellen Dichtungstechnik GmbH ADIGE SPA Germany, Hall 17 Stand D126 Italy, Hall 12 Stand D118 ADIGE SPA ADIRA - Metal Forming Solutions S.A. Italy, Hall 13 Stand E182 Portugal, Hall 12 Stand D66 AERO-LIFT Vakuumtechnik GmbH AGAB Pressautomation AB Germany, Hall 16 Stand J33 Sweden, Hall 27 Stand D52 AGTOS GmbH AICHELIN Holding GmbH Germany, Hall 26 Stand C20 Austria, Hall 27 Stand J02 AIDA Air Liquide Deutschland GmbH Italy, Hall 27 Stand E52 Germany, Hall 26 Stand E55 Airco SystemDruckluft GmbH AJAN ELEKTRONIK SERV. SAN. VE TIC. LTD. STI Germany, Hall 11 Stand A106 Turkey, Hall 13 Stand B52 AKTEKNIK AKYAPAK ULUSLARARASI DIS.
    [Show full text]
  • EU Top Applicants 2010-2014 Based on Assignees2014 5Yr.Tsv
    EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv table_row ordering_cd 15943 309 13406 105 13407 105 13408 105 13409 105 13410 105 13411 105 13412 105 13413 105 13414 105 13415 105 13416 105 13417 105 13418 105 13419 105 13420 105 13421 105 13422 105 13423 105 13424 105 Page 1 of 1235 09/26/2021 EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv st_country_cd us_or_foreign FRX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) ATX (Foreign) Page 2 of 1235 09/26/2021 EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv state_country_of_origin assignee_name FRANCE IMERJ, LTD. AUSTRIA INFINEON TECHNOLOGIES AG AUSTRIA ~INDIVIDUALLY OWNED PATENT AUSTRIA AMS AG AUSTRIA NXP B.V. AUSTRIA JULIUS BLUM GMBH AUSTRIA BAXTER INTERNATIONAL INC. AUSTRIA EPCOS AG AUSTRIA INFINEON TECHNOLOGIES AUSTRIA AG AUSTRIA MED-EL ELEKTROMEDIZINISCHE GERAETE GMBH AUSTRIA SIEMENS AKTIENGESELLSCHAFT AUSTRIA AVL LIST GMBH AUSTRIA MAGNA POWERTRAIN AG & CO KG AUSTRIA HILTI AKTIENGESELLSCHAFT AUSTRIA BOEHRINGER INGELHEIM INTERNATIONAL GMBH AUSTRIA FRONIUS INTERNATIONAL GMBH AUSTRIA SIEMENS VAI METALS TECHNOLOGIES GMBH AUSTRIA CONTINENTAL AUTOMOTIVE GMBH AUSTRIA INTEL MOBILE COMMUNICATIONS GMBH AUSTRIA MAGNA STEYR FAHRZEUGTECHNIK AG & CO. KG Page 3 of 1235 09/26/2021 EU top applicants 2010-2014 Based on Assignees2014 5yr.tsv CY_2010 CY_2011
    [Show full text]
  • Approved Welding Consumables for Use in Ship Construction
    APPROVED WELDING CONSUMABLES FOR USE IN SHIP CONSTRUCTION CONTENTS Introduction Explanatory Notes And Abbreviations Higher Strength Steel Index Of Companies With Approved Consumables Approval Lists By Section Number: 3 Manual And Gravity Welding 4 Submerged Arc Welding 5 Gas Shielded And Self Shielded Metal Arc Welding 6 Electroslag And Electrogas Welding 7 One-Side Welding With Temporary Backing 8 Stainless Steel Consumables 9 Aluminium Alloy Consumables © Lloyds Register of Shipping September 2000 INTRODUCTION These notes are specific to this edition of the publication and changes have been made for consistency with the 1999 edition of the Rules and Regulations for the Classification of Ships, Part 2, “Rules for the Manufacture, Testing and Certification of Materials”, hereafter referred to as the Materials Rules. The welding consumables and consumable combinations listed have complied with the approval requirements set out in the relevant Sections of Chapter 11 of the Materials Rules. The consumables are retained in these lists subject to satisfactory annual tests made in accordance with the Materials Rules, the results of which are reported to the Head Office of Lloyd's Register. Further information may be found in the Materials and Qualification Procedures for Ships, Book J, Procedures for Approval of Welding Consumables and Manufacture of Fabricated Steel Sections. The responsibility for compliance with national or other standards indicated by labelling or implied by the trade name rests with the Manufacturer. It should be noted that unaccountable delays in the receipt of satisfactory annual test results will lead to deletion from the approved list. The Sections are numbered in accordance with the numbering of the respective Sections of the Materials Rules, Chapter 11, namely: Section 3: Consumables for Manual and Gravity Metal Arc Welding of Steels.
    [Show full text]
  • STEEL and METAL INDUSTRY in the Capital Region Berlin-Brandenburg
    STEEL AND METAL INDUSTRY in the Capital Region Berlin-Brandenburg THE GERMAN CAPITAL REGION excellence in metal 2 Steel and metal industry Helsinki 1,630 km Oslo 1,030 km Tallinn Stockholm 1,540 km Moscow 1,080 km 1,830 km Steel and metal industry Riga 1,250 km Copenhagen Vilnius in Berlin-Brandenburg Dublin London 440 km 1,050 km 1,090 km Minsk 1,680 km Amsterdam Berlin 1,120 km 630 km Potsdam Warsaw 580 km The steel and metal industry is among Brussels Kiev the industrial sectors with the largest 740 km Prague Paris 360 km 1,350 km numbers of employees and highest 1,000 km sales figures in the German Capital Vienna 690 km Region Berlin-Brandenburg. Bern Budapest Bucharest 890 km In the State of Brandenburg alone, 930 km 1,700 km Madrid about 38,500 employees work at 2,300 km Istanbul 2,600 enterprises in this sector. 2,220 km They are primarily medium-sized Lisbon Rome 2,750 km 1,480 km businesses, including a large number of market-leading suppliers who work Athens with final producers in the fields 2,360 km of automotive engineering, energy technology and the electrical, Dedicated skilled workers available rail transportation and aerospace industries. A number of major international corporations also The Capital Region has the highest percentage of highly qua- operate in the region. lified skilled workers of any area in Germany. About 40,000 university graduates enter the labor market here each year. The German Capital Region is also home to a broad range of From metal production to final producers institutions offering training and continuing education oppor- tunities for industry-specific professions.
    [Show full text]
  • Knowledge Creation and Innovation Beyond Agglomeration: the Case of Hidden Champions in Germany
    Knowledge creation and innovation beyond agglomeration: The case of Hidden Champions in Germany Von der Fakultät für Physik und Geowissenschaften der Universität Leipzig genehmigte D I S S E R T A T I O N zur Erlangung des akademischen Grades doctor philosophiae Dr. phil. vorgelegt von M.A. Lukas Vonnahme geboren am 12.04.1987 in Salzkotten Gutachter: Dr. Thilo Lang, Universität Leipzig und Leibniz-Institut für Länderkunde Prof. Dr. Reinhard Wießner, Universität Leipzig Tag der Verleihung: 19. Juli 2021 Bibliographische Beschreibung Vonnahme, Lukas Knowledge creation and innovation beyond agglomeration: The case of Hidden Champions in Germany Universität Leipzig, Dissertation 236 Seiten, 295 Literaturangaben, 31 Abbildungen, 32 Tabellen, 2 Anlagen Referat Diese Dissertation bezieht sich auf ein Schlüsselthema der Wirtschaftsgeographie: das Verhältnis zwischen Innovation und Raum. Während vielfältige Belege für die Vorteile von Agglomerationen für Innovation existieren, werden periphere Regionen und ihre Akteure in theoretischen und empirischen Arbeiten nicht ausreichend berücksichtigt. Aufbauend auf zunehmende Kritik an Stadt-zentrierten Ansätzen und der Rolle, die geographischer Nähe zugeschrieben wird, zielt diese Forschung darauf ab, die Merkmale und Hauptfaktoren von Innovation außerhalb von Agglomerationen zu identifizieren und nachzuvollziehen, inwiefern sich diese von denen innerhalb von Agglomerationen unterscheiden. Dazu werden die Innovationsaktivitäten von Hidden Champions in Deutschland empirisch untersucht. Auf Grundlage
    [Show full text]
  • About the Contributors
    534 About the Contributors Raimund Ubar is a professor of computer engineering at Tallinn Technical University and the head of Centre of Excellence for Integrated Electronic Systems and Biomedical Engineering in Estonia. R. Ubar received his PhD degree in 1971 at the Bauman Technical University in Moscow. His main rese- arch interests include computer science, electronics design, digital test, diagnostics and fault-tolerance. He has published more than 250 papers and three books, lectured as a visiting professor in more than 25 universities in about 10 countries, and served as a General Chairman for 10th European Test Con- ference, NORCHIP, BEC, EWDTC. He is a member of Estonian Academy of Sciences, Golden Core member of IEEE Computer Society and honorary professor of National University of Radioelectronics Charkiv (Ukraine). He was a chairman of Estonian Science Foundation, and a member of the Academic Advisory Board of the Estonian President. Jaan Raik received his M.Sc. and Ph.D. degrees in Computer Engineering from Tallinn University of Technology (TUT) in 1997 and in 2001, respectively. Since 2002 he holds a position of senior research fellow at TUT. He is a member of IEEE Computer Society, a Steering Committee member of European Dependable Computing Conference and Programme Committee member for many leading conferences (DATE, ETS, DDECS, etc.). Dr. Raik has co-authored more than 100 scientific publications. In 2004, he was awarded the national Young Scientist Award. In 2005, he served as the Organisation Chair of the IEEE European Test Symposium. He has carried out research work at several foreign institutes inclu- ding Darmstadt University of Technology, INPG Grenoble, Nara Institute of Science and Technology (Japan), Fraunhofer Institute of Integrated Circuits (Dresden), University of Stuttgart and University of Verona.
    [Show full text]
  • S&S Katalog 07
    SVARKA, REZKA, NAPLAVKA 2007 MeΩdunarodnaä specializirovannaä vystavka £Svarka, rezka, naplavka” Москва/Россия, 28 – 31 мая 2007 Выставочный комплекс “ЗАО ЭКСПОЦЕНТР“ на Красной Пресне, Павильон 7.1, 7.2 SCHWEISSEN&SCHNEIDEN RUSSIA 2007 International Trade Fair Joining · Cutting · Surfacing Moscow/Russia May 28 – 31, 2007 Krasnaya Presnya Expocentr Fairgrounds Pav. 7.1, 7.2 Устроители/Organizers: Messe Düsseldorf GmbH Messe Essen GmbH P.O. Box 10 10 06 ОOО Мессе Дюссельдорф Москва P.O. Box 100165 D-40001 Düsseldorf Краснопресненская наб., 14 D–45001 Essen, Germany Germany строение 2, павильон 7 Phone: +49(0)2 11/45 60-01 Phone: +49/2 01/72 44-0 123 100 Москва Fax: +49(0)2 11/45 60-77 40 Phone: +7/495/205 00 00 Fax: +49/2 01/72 44-448 www.messe-duesseldorf.de Fax: +7/495/2 55 27 71 [email protected] [email protected] www.messe-duesseldorf.ru www.messe-essen.de [email protected] При содействии/In co-operation with: SCHWEISSEN & SCHNEIDEN RUSSIA 2007 1 Д-р Вольфганг Райнигер мэр города Эссена, председатель Наблюдательного совета фирмы «Messe Essen» Выставка «Сварка и резка Россия» впервые дает возможность фирмам, деятельность которых связана со сваркой, резкой и родственными процессами, представить свои продукты и услуги на чрезвычайно интересном и быстро растущем рынке России. Мы сердечно приветствуем экспонентов и посетителей на премьере этой выставки в Экспоцентре на Красной Пресне. Все добрые предзнаменования для успеха выставки налицо: спрос на сварочные технологии в России постоянно возрастает, как и потребность в информации о современных технологиях. Поэтому на выставке «Сварка и резка Россия» главное внимание будет уделено новейшим продуктам и процессам, а также установлению и углублению деловых контактов.
    [Show full text]
  • Экспоненты Из Саксонии Companies from Saxony
    Экспоненты из Саксонии Companies from Saxony МЕТАЛЛООБРАБОТКА 2019 27 - 31 мая 2019г. Центральный выставочный комплекс »Экспоцентр«, Россия, г. Москва Зал 2.2, стенд Б31 International Exhibition METALLOOBRABOTKA 2019 May 27 - 31, 2019 Central Exhibition Complex »Expocentr« Russia, Moscow Hall 2.2, Stand B31 ВВЕДЕНИЕ Машиностроение и строительство установок в Саксонии Саксония – это колыбель немецкого машиностроения. Уже около 200 лет станки и оборудование из Саксонии пользуются заслуженной популярностью во всем мире. В секторе машиностроения занято около 45 тысяч сотрудников на примерно 1 тысяче заводов и сектор характеризуется самым высоким экспортным показателем саксонской промышленности. Доля машиностроения в Саксонии составляет примерно 14 % всего промышленного товарооборота и 17 % экспорта. Мировые концерны, как, например, «NILES-SIMMONS HEGENSCHEIDT» имеют свою штаб-квартиру в Саксонии или действуют на мировом рынке, как, например, «Starrag» или «Koenig & Bauer», с крупным производством в Саксонии. Самая старейшая существующая станкостроительная компания в Германии – «UNION Werkzeugmaschinen GmbH Chemnitz» - является ведущим производителем горизонтально-расточных станков и обрабатывающих центров. Большинство саксонских машиностроительных компаний относятся к средним и малым предприятиям и являются успешными инноваторами в области ресурсосберегающего производства и процессов для изготовления новых материалов для применения в машиностроении. 2 | INTRODUCTION MACHINE! – Mechanical Engineering and Plant Construction in Saxony Saxony is considered to be the cradle of German machine construction. For more than 200 years now, machinery made in Saxony has enjoyed a superb reputation around the globe. The branch with about 45,000 employees in approx. 1,000 companies accounts for almost 14 percent of the industrial turnover and 17 percent of the export turnover generated in Saxony. Global corporations like NILES-SIMMONS HEGENSCHEIDT have their headquarters in Saxony or are active on the global market from a strong base located here like Starrag or Koenig & Bauer.
    [Show full text]
  • PCT Gazette, Weekly Issue No. 4, 2005
    04/2005 27 Jan/jan 2005 PCT Gazette - Section III - Gazette du PCT 2431 SECTION III WEEKLY INDEXES INDEX HEBDOMADAIRES INTERNATIONAL APPLICATION NUMBERS AND CORRESPONDING INTERNATIONAL PUBLICATION NUMBERS NUMÉROS DES DEMANDES INTERNATIONALES ET NUMÉROS DE PUBLICATION INTERNATIONALE CORRESPONDANTS International International International International International International Application Publication Application Publication Application Publication Numbers Numbers Numbers Numbers Numbers Numbers Numéros des Numéros de Numéros des Numéros de Numéros des Numéros de demandes publication demandes publication demandes publication internationales internationale internationales internationale internationales internationale AT CA CH PCT/AT2004/000215 WO 2005/008704 PCT/CA2004/000866 WO 2005/007235 PCT/CH2004/000294 WO 2005/006883 PCT/AT2004/000234 WO 2005/007650 PCT/CA2004/000923 WO 2005/008516 PCT/CH2004/000362 WO 2005/008183 PCT/AT2004/000247 WO 2005/007580 PCT/CA2004/000993 WO 2005/006888 PCT/CH2004/000384 WO 2005/007991 PCT/AT2004/000248 WO 2005/007899 PCT/CA2004/001003 WO 2005/007184 PCT/CH2004/000388 WO 2005/008874 PCT/AT2004/000258 WO 2005/007417 PCT/CA2004/001007 WO 2005/007189 PCT/CH2004/000408 WO 2005/007618 PCT/AT2004/000259 WO 2005/008115 PCT/CA2004/001012 WO 2005/007004 PCT/CH2004/000419 WO 2005/007381 PCT/AT2004/000260 WO 2005/007990 PCT/CA2004/001026 WO 2005/009051 PCT/CH2004/000446 WO 2005/008606 PCT/AT2004/000261 WO 2005/009092 PCT/CA2004/001027 WO 2005/007793 PCT/CH2004/000447 WO 2005/007329 PCT/AT2004/000262 WO 2005/007945
    [Show full text]
  • Virtuelle Schweißtrainersysteme Für Die Ausbildung
    01 WELDING AND CUTTING TODAY Donnerstag / Thursday, 28.9.2017 www.welding-and-cutting-today.info Düsseldorf, 28.09. 2017 / Nr. 4 • No. 4 Täglich erscheinende offizielle Messezeitung • Official daily fair newspaper Halle 15 – Stand D25 Virtuelle Schweißtrainersysteme für die Ausbildung Die Hersteller der drei führenden Schweißtrainersys- lator bietet sowohl dem Schweißanfänger als auch teme „Soldamatic“ (Seabery), „Virtual Welder“ (Froni- dem Experten die Möglichkeit, effektiv und risikolos us) und „GSI-SLV Schweißtrainer“ (SLV Halle) stellen Trainingseinheiten zu absolvieren. Einen etwas ande- auf dem Messestand des DVS – Deutscher Verband ren Ansatz verfolgt der GSI-SLV Schweißtrainer. Hier für Schweißen und verwandte Verfahren e. V. in Hal- wird mit einem echten Lichtbogen niedriger Intensität le 15 ihre Virtual Welding Training Systems (VWTS) trainiert, es wird das gleiche Equipment wie in der vor. Jeder Interessierte kann während der Messe an Schweißerkabine verwendet. Die Bewegungsabläufe diesen Systemen problemlos selbst das Schweißen des Schweißers und die Lichtbogenparameter wer- ausprobieren. den aufgezeichnet und ausgewertet. Die Firma Seabery stellt hier auf der Messe die neu- In einer Zeit, in der die Entwicklung der Digitalisierung este Generation ihres Virtual Reality-Systems Solda- weit fortgeschritten ist, werden digitale Ressourcen matic vor. Die Hardware und Software wurden weiter zunehmend auch als Werkzeuge auf dem Bildungs- entwickelt, um ein perfekt realistisches Schweißerleb- sektor genutzt. Beispielsweise gehören Begriffe wie nis zu vermitteln. Das Gerät hat „look and feel“ einer „E-Learning“ oder „Virtuelles Training“ schon zum Schweißstromquelle, der Übende schweißt mit einem alltäglichen Sprachgebrauch, weil in zahlreichen Bil- handelsüblichen Brenner und verwendet eine für VR dungsbereichen diese modernen Lehrmethoden inte- angepasste ergonomische Schweißmaske.
    [Show full text]
  • Recueil-Brevets-2018-12.Pdf
    2018/12 RECUEIL DES VERZAMELING VAN DE Brevets d’invention Uitvindingsoctrooien MAI 2018 (Partie 2 : 08/05 – 15/05) MEI 2018 (Deel 2 : 08/05 – 15/05) SAMMLUNG DER BULLETIN OF Erfindungspatente Patents MAI 2018 (Teil 2 : 08/05 – 15/05) MAY 2018 (Part 2 : 08/05 – 15/05) Numéro d'entreprise : 0314.595.348 Ondernemingsnummer : 0314.595.348 2 Introduction Inleiding Le Recueil des brevets d'invention apparaît De Verzameling der uitvindingsoctrooien verschijnt deux fois par mois et uniquement sous forme tweemaal per maand en alleen in elektronische électronique. Chaque édition du Recueil des vorm. Elke uitgave van de Verzameling der brevets d'invention comprend 15 rubriques. uitvindingsoctrooien bestaat uit 15 rubrieken. Deze Ces rubriques contiennent des données rubrieken bevatten bibliografische gegevens over bibliographiques relatives aux (demandes de) Belgische octrooi(en) (aanvragen), Europese brevet(s) belge(s), (demandes de) brevet(s) octrooi(en) (aanvragen) met aanduiding van européen(s) désignant la Belgique et (demandes België en (aanvragen van) Belgische aanvullende de) certificat(s) complémentaire(s) de protection beschermingscertificaten voor geneesmiddelen belge(s) pour des médicaments ou des produits of gewasbeschermingsmiddelen. De Verzameling phytopharmaceutiques. Le Recueil des brevets der uitvindingsoctrooien kan gratis geraadpleegd d'invention peut être consulté gratuitement sur le worden op de internetsite van de Federale site internet du Service Public Fédéral Economie. Overheidsdienst Economie. Einleitung Introduction Die Sammlung der Erfindungspatente erscheint The Bulletin of patents appears twice per month zweimal im Monat und nur in elektronischer and only in an electronic version. Each issue of Form. Jede Ausgabe der Sammlung der the Bulletin of patents consists of 15 headings.
    [Show full text]