DOCSLIB.ORG

Intel® Server Boards S5000PSL and S5000XSL

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Intel® Server Boards S5000PSL and S5000XSL Intel® Server Boards S5000PSL and S5000XSL Technical Product Specification Intel order number: D41763-008 Revision 1.7 August, 2010 Enterprise Platforms and Services Division – Marketing Revision History Intel® Server Boards S5000PSL and S5000XSL TPS Revision History Date Revision Modifications Number May 2006 1.0 Intiial Release. September 2006 1.1 Updated legal disclaimer. Updated Processor Table. Updated Memory section. September 2006 1.2 Updated Reference Documents section. August 2007 1.3 Updated to reflect new processor support and new product codes where applicable. Updated sections 3.1, 3.1.3.4.2.3, 3.2.1.4, 3.2.1.5, 3.2.2.1, 3.5.2, and 6.1. Added 3.1.3.4.2.3. Updated Tables 1, 2, and 46. Updated Figure 2. Updated Appendix A and Appendix E. November 2007 1.4 Added board dimension to the Server Board Features table. Corrected processor naming convention. Removed the Processor Support Matrix table. Corrected the NIC Status LED table. Removed unused BNB temp sensor from the BMC Sensors table. March 2009 1.5 Updated section 6.3 BIOS Select Jumper. Updated the Front Panel SSI Standard 24-pin Connector Pin-out (J1E4) table. Updated section 3.5 Network Interface Controller. Removed ‘dual-core’ and ‘quad-core’ from the processor definition. April 2010 1.6 Removed 9.3.7 CNCA (CCC-China). August 2010 1.7 Added Table 6 for quad rank memory and corrected the title of Table 20. ii Revision 1.7 Intel order number: D41763-008 Intel® Server Boards S5000PSL and S5000XSL Disclaimers Disclaimers Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The Intel® Server Boards S5000PSL and S5000XSL may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Refer to the Intel® Server Boards S5000PSL and S5000XSL Specification Update for published errata. Intel Corporation server boards contain a number of high-density VLSI and power delivery components that need adequate airflow to cool. Intel’s own chassis are designed and tested to meet the intended thermal requirements of these components when the fully integrated system is used together. It is the responsibility of the system integrator that chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of air flow required for their specific application and environmental conditions. Intel Corporation can not be held responsible if components fail or the server board does not operate correctly when used outside any of their published operating or non-operating limits. Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation. *Other brands and names may be claimed as the property of others. Copyright © Intel Corporation 2010. Revision 1.7 iii Intel order number: D41763-008 Table of Contents Intel® Server Boards S5000PSL and S5000XSL TPS Table of Contents 1. Introduction .......................................................................................................................... 1 1.1 Chapter Outline........................................................................................................ 1 1.2 Server Board Use Disclaimer .................................................................................. 1 2. Server Board Overview........................................................................................................ 2 2.1 Server Board Feature Set........................................................................................ 2 2.2 Server Board Layout................................................................................................ 4 2.2.1 Server Board Connector and Component Layout.................................................... 4 2.2.2 Server Board Mechanical Drawings ........................................................................ 7 2.2.3 Server Board ATX I/O Layout ................................................................................ 13 3. Functional Architecture ..................................................................................................... 14 3.1 Intel® 5000P/5000X Memory Controller Hub (MCH).............................................. 16 3.1.1 System Bus Interface............................................................................................. 16 3.1.2 Processor Support ................................................................................................. 16 3.1.3 Memory Subsystem ............................................................................................... 18 3.1.4 Snoop Filter (5000X MCH only)............................................................................. 24 3.2 Enterprise South Bridge (ESB2-E) ........................................................................ 24 3.2.1 PCI Subsystem ...................................................................................................... 25 3.2.2 Serial ATA Support ................................................................................................ 27 3.2.3 Parallel ATA (PATA) Support ................................................................................ 28 3.2.4 USB 2.0 Support.................................................................................................... 28 3.3 Video Support ........................................................................................................ 28 3.3.1 Video Modes.......................................................................................................... 29 3.3.2 Video Memory Interface......................................................................................... 29 3.3.3 Dual Video ............................................................................................................. 29 3.4 SAS Controller ....................................................................................................... 29 3.4.1 SAS RAID Support ................................................................................................ 30 3.4.2 SAS/SATA Connector Sharing .............................................................................. 30 3.5 Network Interface Controller (NIC) ........................................................................ 30 3.5.1 Intel® I/O Acceleration Technolgy (Intel® I/OAT).................................................... 30 3.5.2 MAC Address Definition......................................................................................... 31 3.6 Super I/O ............................................................................................................... 31 3.6.1 Serial Ports ............................................................................................................ 31 iv Revision 1.7 Intel order number: D41763-008 Intel® Server Boards S5000PSL and S5000XSL TPS Table of Contents 3.6.2 Floppy Disk Controller ........................................................................................... 32 3.6.3 Keyboard and Mouse Support ............................................................................... 32 3.6.4 Wake-up Control.................................................................................................... 32 3.6.5 System Health Support.......................................................................................... 32 4. Platform Management........................................................................................................ 33 5. Connector/Header Locations and Pin-outs...................................................................... 35 5.1 Board Connector Information................................................................................. 35 5.2 Power Connectors ................................................................................................. 36 5.3 System Management Headers .............................................................................. 37 5.3.1 Intel® Remote Management Module (Intel® RMM) Connector ............................... 37 5.3.2 LCP/AUX IPMB Header......................................................................................... 39 5.3.3 IPMB Header ......................................................................................................... 39 5.3.4 HSBP Header ........................................................................................................ 40 5.3.5 SGPIO Header......................................................................................................
Load more

Recommended publications
  • Intel® Server Board S3420GP
    Intel® Server Board S3420GP Technical Product Specification Intel order number E65697-010 Revision 2.4 January, 2011 Enterprise Platforms and Services Division - Marketing Revision History Intel® Server Board S3420GP TPS Revision History Date Revision Modifications Number Feb. 2009 0.3 Initial release. May 2009 0.5 Update block diagram. July. 2009 0.9 Updated POST error code and diagram. Aug. 2009 1.0 Updated MTBF. Nov. 2009 1.1 Additional details for memory configuration. Dec. 2009 1.2 Added Intel® Server Board S3420GPV details. Dec. 2009 2.0 Updated processor name. Jan. 2010 2.1 Corrected the typo. Apr. 2010 2.2 Corrected the typo, updated processor name and remove CCC certification marking information. July. 2010 2.3 Corrected the typo. Jan.2011 2.4 Corrected the typo. Added RDIMM support on S3420GPV. Updated Table 45. Add USB device readiness beep code information. ii Revision 2.4 Intel order number E65697-010 Intel® Server Board S3420GP TPS Disclaimers Disclaimers Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications.
    [Show full text]
  • SAMPLE CHAPTER 1 Chapter Personal Computer 1 System Components the FOLLOWING COMPTIA A+ ESSENTIALS EXAM OBJECTIVES ARE COVERED in THIS CHAPTER
    SAMPLE CHAPTER 1 Chapter Personal Computer 1 System Components THE FOLLOWING COMPTIA A+ ESSENTIALS EXAM OBJECTIVES ARE COVERED IN THIS CHAPTER: Ûß1.2 Explain motherboard components, types and features Nß Form Factor Nß ATX / BTX, Nß micro ATX Nß NLX Nß I/O interfaces Material Nß Sound Nß Video Nß USB 1.1 and 2.0 Nß Serial Nß IEEE 1394 / FireWire Nß Parallel Nß NIC Nß Modem Nß PS/2 Nß Memory slots Nß RIMM Nß DIMM Nß SODIMM CopyrightedNß SIMM Nß Processor sockets Nß Bus architecture 86498book.indb 1 7/22/09 5:37:17 AM Nß Bus slots Nß PCI Nß AGP Nß PCIe Nß AMR Nß CNR Nß PCMCIA Chipsets Nß BIOS / CMOS / Firmware Nß POST Nß CMOS battery Nß Riser card / daughterboard Nß [Additional subobjectives covered in chapter 2] Ûß1.4 Explain the purpose and characteristics of CPUs and their features Nß Identify CPU types Nß AMD Nß Intel Nß Hyper threading Nß Multi core Nß Dual core Nß Triple core Nß Quad core Nß Onchip cache Nß L1 Nß L2 Nß Speed (real vs. actual) Nß 32 bit vs. 64 bit Ûß1.5 Explain cooling methods and devices Nß Heat sinks Nß CPU and case fans 86498book.indb 2 7/22/09 5:37:18 AM Nß Liquid cooling systems Nß Thermal compound Ûß1.6 Compare and contrast memory types, characteristics and their purpose Nß Types Nß DRAM Nß SRAM Nß SDRAM Nß DDR / DDR2 / DDR3 Nß RAMBUS Nß Parity vs. Non-parity Nß ECC vs. non-ECC Nß Single sided vs. double sided Nß Single channel vs.
    [Show full text]
  • AF IC05 Motherboards Unit 1
    AF_IC05_ Motherboards Unit 1 Contents Introduction..................................................................................................................................2 Glossary.......................................................................................................................................3 Form factors.................................................................................................................................4 Common standards:...........................................................................................................5 ATX...........................................................................................................................6 Micro-ATX.................................................................................................................6 Mini-ITX.....................................................................................................................7 Motherboard components............................................................................................................8 CPU socket................................................................................................................9 Memory slots....................................................................................................................11 Chipset.............................................................................................................................12 Traditional chipset...................................................................................................13
    [Show full text]
  • PDSM4+ 1.0.Indb
    PDSM4+ PDSME+ USER’S MANUAL Revision 1.0 The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software, if any, and documenta- tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, THE VENDOR SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA. Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.
    [Show full text]
  • VX97 User's Manual ASUS CONTACT INFORMATION Asustek COMPUTER INC
    R VX97 Pentium Motherboard USER'S MANUAL USER'S NOTICE No part of this manual, including the products and softwares described in it, may be repro- duced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup pur- poses, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PAR- TICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDEN- TAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSI- NESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. Products and corporate names appearing in this manual may or may not be registered trade- marks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. • Intel, LANDesk, and Pentium are registered trademarks of Intel Corporation. • IBM and OS/2 are registered trademarks of International Business Machines. • Symbios is a registered trademark of Symbios Logic Corporation. • Windows and MS-DOS are registered trademarks of Microsoft Corporation. • Sound Blaster AWE32 and SB16 are trademarks of Creative Technology Ltd. • Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
    [Show full text]
  • MICROPROCESSOR REPORT the INSIDERS’ GUIDE to MICROPROCESSOR HARDWARE Slot Vs
    VOLUME 12, NUMBER 1 JANUARY 26, 1998 MICROPROCESSOR REPORT THE INSIDERS’ GUIDE TO MICROPROCESSOR HARDWARE Slot vs. Socket Battle Heats Up Intel Prepares for Transition as Competitors Boost Socket 7 A A look Look by Michael Slater ship as many parts as they hoped, especially at the highest backBack clock speeds where profits are much greater. The past year has brought a great deal The shift to 0.25-micron technology will be central to of change to the x86 microprocessor 1998’s CPU developments. Intel began shipping 0.25-micron A market, with Intel, AMD, and Cyrix processors in 3Q97; AMD followed late in 1997, IDT plans to LookA look replacing virtually their entire product join in by mid-98, and Cyrix expects to catch up in 3Q98. Ahead ahead lines with new devices. But despite high The more advanced process technology will cut power con- hopes, AMD and Cyrix struggled in vain for profits. The sumption, allowing sixth-generation CPUs to be used in financial contrast is stark: in 1997, Intel earned a record notebook systems. The smaller die sizes will enable higher $6.9 billion in net profit, while AMD lost $21 million for the production volumes and make it possible to integrate an L2 year and Cyrix lost $6 million in the six months before it was cache on the CPU chip. acquired by National. New entrant IDT added another com- The processors from Intel’s challengers have lagged in petitor to the mix but hasn’t shipped enough products to floating-point and MMX performance, which the vendors become a significant force.
    [Show full text]
  • Pentium II Processor Thermal Design Guidelines
    Pentium® II Processor Thermal Design Guidelines February 1999 Order Number: 243331-003 Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The Pentium® II processor may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product o rder. Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 1-800- 548-4725 or by visiting Intel's website at http://www.intel.com. Copyright © Intel Corporation, 1997 - 1999 *Third-party brands and names are the property of their respective owners.
    [Show full text]
  • Dell EMC Poweredge R640 Technical Guide
    Dell EMC PowerEdge R640 Technical Guide Regulatory Model: E39S Series Regulatory Type: E39S001 June 2021 Rev. A08 Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 - 2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Contents Chapter 1: Product overview......................................................................................................... 5 Introduction...........................................................................................................................................................................5 New technologies................................................................................................................................................................ 5 Chapter 2: System features...........................................................................................................7 Product comparison............................................................................................................................................................ 7 Technical specifications....................................................................................................................................................
    [Show full text]
  • Xeon Replaces Pentium Pro: 7/13/98
    1997 COMPUTER PRESS ASSOCIATION WINNER ♦ BEST COMPUTER NEWSLETTER VOLUME 12, NUMBER 9 JULY 13,1998 MICROPROCESSOR REPORT THE INSIDERS’ GUIDE TO MICROPROCESSOR HARDWARE Xeon Replaces Pentium Pro Intel Targets Servers and Workstations by Keith Diefendorff sure applied on the low end by AMD, Cyrix, and IDT. The problem for Intel is that it needs a high ASP to fuel the semi- Intel has plugged the gaping hole at the top end of its conductor R&D and fab improvements that keep it ahead of product line—previously served by the aging Pentium Pro— its competitors. with a Deschutes-based processor module the company Having so far failed to stimulate demand for higher labels Pentium II Xeon. As Figure 1 shows, the new processor performance (and higher priced) processors in PCs, Intel family will serve the midrange to high-end server and work- will try to take a larger share of the higher-margin worksta- station markets until the 64-bit Merced processor enters ser- tion and server markets. While these markets are each about vice in 2000. only 1% of the size of the PC market in unit volume, they can Pentium Pro was previously the only processor in easily bear 10 times the processor price. This fact makes these Intel’s lineup capable of addressing this high-end segment, markets immensely profitable and gives Intel an opportunity because it’s the only processor that supports four-way multi- to increase revenue and ASP. processing (MP), memories larger than four gigabytes, and Beyond the desire to prop up revenue and ASP, Intel fast ECC L2 caches larger than 512K—all minimum require- realizes that strategically it needs to own the markets on both ments of the high-end market.
    [Show full text]
  • The Motherboard ‐ Chapter #5
    The Motherboard ‐ Chapter #5 Amy Hissom Key Terms Advanced Transfer Cache (ATC)— A type of L2 cache contained within the Pentium processor housing that is embedded on the same core processor die as the CPU itself. Audio/modem riser (AMR) — A specification for a small slot on a motherboard to accommodate an audio or modem riser card. A controller on the motherboard contains some of the logic for the audio or modem functionality. Back side bus — The bus between the CPU and the L2 cache inside the CPU housing. Bus speed — The speed, or frequency, at which the data on the motherboard is moving. Communication and networking riser (CNR) — A specification for a small expansion slot on a motherboard that accommodates a small audio, modem, or network riser card. CISC (complex instruction set computing) — Earlier CPU type of instruction set. Cooler — A combination cooling fan and heat sink mounted on the top or side of a processor to keep it cool. Discrete L2 cache — A type of L2 cache contained within the Pentium processor housing, but on a different die, with a cache bus between the processor and the cache. Dual-voltage CPU — A CPU that requires two different voltages, one for internal processing and the other for I/O processing. Execution Trace Cache — A type of Level 1 cache used by some CPUs to hold decoded operations waiting to be executed. Expansion bus — A bus that does not run in sync with the system clock. EPIC (explicitly parallel instruction computing) — The CPU architecture used by the Intel Itanium chip that bundles programming instructions with instructions on how to use multiprocessing abilities to do two instructions in parallel.
    [Show full text]
  • RAC6000 Industrial Computers Technical Reference Guide RAC6000 Industrial Computers Technical Reference Guide
    RAC6000 Industrial Computers Technical Reference Guide RAC6000 Industrial Computers Technical Reference Guide This document contains a collection of general computer technology information. It also contains detailed technical information for the RAC6000 industrial computer products. Here is an overview of the document: • Glossary of Terms – some independent websites of computer glossaries. • Computer Component Definitions – overview of key computer components and application to RAC6000 products. • Reliability Information – product MTBF overview and data. • RAC6000 Product Support – overview of RAC6000 computer support strategy. • Computer Technical Data Sheets – detailed technical specifications for RAC6000 Processor Cards and Active Motherboards. • RAC6000 Chemical Resistance – comprehensive tables for 6180, 6181, and 6185 products. Glossary of Terms The following websites contain detailed glossaries for computer terms and acronyms. http://www.geek.com/glossary/glossary.htm http://homepages.enterprise.net/jenko/Glossary/G.html http://www.computeruser.com/resources/dictionary/dictionary.html Computer Component Definitions The following sections provide an overview for various computer terms and components, as well as their application to RAC6000 computer products. Passive Backplane Computers A computer platform consisting of a multi-slot backplane and a separate plug-in CPU card. Several years ago when computers were less reliable and changing rapidly, passive backplane computers were popular because it is easy to replace the CPU card for repairs or upgrades. Today passive backplane computers are popular because they can offer lots of add-in card slots, or can be designed to fit small enclosures. Passive backplane computers are primarily used in industrial and telecommunications applications, so their technology usually lags commercial PCs by at least 6 months.
    [Show full text]
  • Thinkstation D30 Section I: System Overview
    PDF Version: 1.0, April 9, 2012 THINKSTATION D30 Product Overview The dual-processor D30 workstation uses an Extended-ATX/EEB based motherboard, an 1120 Watt (W) power supply unit (PSU), and a 49-liter ATX form factor tower. The D30 motherboard consists of the Intel® C602 Chipset and two 2011-pin Land Grid Array (LGA2011) Socket-R processor sockets, with support for quad core, six core, and eight core processors from the Intel® Xeon line (Sandy Bridge EP). Memory support consists of error- correcting code (ECC) unbuffered Double Data Rate 3 (DDR3) Synchronous Dynamic Random Access Memory (SDRAM). Maximum memory supported is 128GB for UDIMMs and 512GB (pending 32GB RDIMM availability). SECTION I: SYSTEM OVERVIEW Operating Systems Preloaded Genuine Windows 7® Professional 64-bit Genuine Windows 7® Professional 32-bit Supported Genuine Windows XP Professional 64-bit Genuine Windows XP Professional 32-bit Red Hat Enterprise Linux 6.2 Motherboard – D30 Table 1. D30 Motherboard Summary D30 Motherboard Summary Form Factor Board Size 12.23″ x 14.01″ (310.68mm x 355.9mm) Layout Custom, based on Extended-ATX/EEB Standard Motherboard Core Processor Support Intel® Xeon™ Quad Core (Sandy Bridge EP) Intel® Xeon™ Six Core (Sandy Bridge EP) Intel® Xeon™ Eight Core (Sandy Bridge EP) Socket Type (2) x Intel Socket-R (LGA2011) Memory Support 1600/1333/1066/800 MHz QPI (GTPS) 6.4/7.2/8.0 GTPS Links Voltage Regulator VR12.1 – 150W TDP Chipset (PCH) Intel(r) C602Support for HDD enablement modules for upgraded SATA and SAS support Flash 128Mbit SPI Flash with
    [Show full text]