DOCSLIB.ORG

PIX 260I User Guide and Technical Information Firmware Rev

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
PIX 260I User Guide and Technical Information Firmware Rev PIX 260i User Guide and Technical Information Firmware rev. 1.03 Sound Devices, LLC E7556 State Rd. 23 and 33 • Reedsburg, WI • USA +1 (608) 524-0625 • fax: +1 (608) 524-0655 Toll-Free: (800) 505-0625 www.sounddevices.com [email protected] PIX 260i User Guide and Technical Information Table of Contents Introduction . 2 F Sampling Rate Modes . 28 Manual Conventions . 2 48 .048k and 48 .048kF . 28 Video Mode and Audio Mode . 2 Fostex DV40 . 29 Panel Descriptions . 4 47 .952k and 47 .952kF . 29 Front Panel . 4 Video Scaling and Frame Rate Conversion . 29 Rear Panel . 5 3:2 Pulldown Removal . 30 PIX-CADDY 2 (Optional) . 7 Up and Down Conversion . 30 Menu and Navigation . 8 Down-Conversion . 31 Up-Conversion . 32 LCD . 8 Main View . .. 8 Playback . 33 On-screen Display . 8 Playback Operation . 33 Menu . 10 Fast Forward and Rewind . 33 Audio Screen . 10 File Skip . 33 File List . 11 Shuttle Playback Mode . 34 File Details . 13 Cue Marker . 34 Inputs and Outputs . 14 Cue Marker Looping . 35 Play List . 35 Video Inputs . 14 Playback Mode . 36 HDMI . .. 14 Playback Rate of Audio Files . 37 SDI . 14 Non-Native File Playback . 37 Video Outputs . 14 Exporting QT Files for 260i Playback . .. 37 Audio Inputs . 15 Playing Back Files on a Computer . 37 Analog Audio Inputs . 15 XLR (1-2) . 15 Synchronization and Timecode . 38 DB25 (1-8) . 15 Sync Reference . 39 Digital Audio Inputs . 15 Video Mode Synchronization . 39 HDMI / SDI Embedded Audio . 15 Audio Mode Synchronization . 39 AES3 . 15 Timecode Reader . 39 Dante Audio Inputs . 16 Internal Ambient® Lockit: Timecode Generator with Sync Out 40 Dante Redundancy . 17 Setting the Sync Out . 40 Sample Rate Converters . 17 Timecode Modes . 40 Choosing Audio Sources . 17 Freerun Timceode Mode . 40 Input Level Control . 17 Record Run Timecode Mode . 40 Input Delay Control . 18 External Timecode Mode . 41 Audio Outputs . 18 Timecode Frame Rate . 41 Analog Audio Outputs . 18 Timecode Input Sources . 41 Digital Audio Outputs (AES/HDMI) . 18 Timecode BNC . 41 Dante Audio Outputs . 18 SDI or HDMI Input Embedded Timecode . 41 SDI Audio Outputs . 18 Synchronization/Timecode Examples . 41 Headphone Output . 18 Single Video Camera, no Genlock . 41 Ethernet . 19 Single Camera with Genlock Input, Genlocked from PIX . 42 Multiple Cameras with Genlock Input, all Genlocked from a Single Video Monitoring Features . 20 PIX . 42 Exposure Assist . 20 Camera #1 to PIX #1, Camera #2 to PIX #2, No Genlock . 43 False Color . .. 20 Camera to PIX with Word Clock Connection to Audio Recorder 43 Zebras . 21 External Control . 44 Focus Assist . 22 RS422 . 44 Peaking . 22 PIX Grouping . 44 Edge Enhance . 23 Group Transport . 44 Zoom . 24 Non-Grouping Settings and Functions . 44 Flip Display . 24 Web Interface - PIXNET . .. 44 Recording . .. 25 PIXNET All Units Page . 45 Selecting Video File Resolution and Frame Rate . 26 PIXNET Unit Page . 46 Progressive Segmented Frames (PsF) . 26 PIXNET Unit Page Main View and Menu Tabs . 47 Selecting a Video Codec . 26 Main View . 47 Interruption of Signal During Recording . .. 27 Clips Menu . 47 Alignment of Audio and Video . 27 File Storage Menu . 47 Audio Track Arming . 27 Video Menu . 47 Audio Mode . 27 Audio Menu . 48 Polyphonic or Monophonic WAV Files . 27 TC Menu . 48 Audio Mode Settings . 28 OSD Menu . 48 PIX 260i User Guide and Technical Information Remote Menu . 48 File Storage . 62 Network Menu . 48 Video . 63 System Menu . 48 Audio . 64 Triggering Recording from External Timecode . 48 Timecode/Sync . 66 Triggering Recording from SDI Flag Bits . 49 LCD Monitor . 67 GPIO (General Purpose Input / Output) . 49 On-Screen Display . .. 68 USB Keyboard . 50 Remote Control . 68 Storage and File Management . 51 Network . 69 Storage . 51 System . 69 PIX-CADDY . 51 Quick Setup . 70 eSATA . .. 51 Button Shortcuts . .. 71 Supported Storage Devices . 51 Connector Pin Assignments . 72 Formatting . 52 Appendix A - Supported Files . 74 Drive Modes . 52 Record Mode (Simultaneous or Sequential) . 52 Specifications - PIX 260i . 75 Metadata . 53 SDI . .. 75 CamID . 53 HDMI . 75 Reel . 53 Video Input Resolutions / Rates . 75 Clip . .. 53 Video Codecs and Files . 75 Scene/Shot . 53 Up/Down/Cross Conversion . 75 Take . 53 Frame Rate Conversion . 75 Audio Track Name (Audio Only) . 54 LCD . 75 File Management . 54 Audio Recording . 75 File Size Limit . .. 54 Analog Audio . 76 File Naming . 54 Digital Audio . 76 RED File Format . ..
Load more

Recommended publications
  • ECESATUSB1 This Expresscard Power Esata Port Controller Card
    1 Port ExpressCard Power eSATA Controller Adapter Card StarTech ID: ECESATUSB1 This ExpressCard Power eSATA port controller card can be installed in an available ExpressCard 34/54 mm slot to provide a powered eSATA connection, and also alternatively provide either external SATA (data only) or USB 2.0 connectivity from one uniquely designed port if using with standard eSATA or USB devices. An ideal solution for using an eSATA SSD Flash drive on your laptop, the power eSATA card delivers both a high speed eSATA connection and power from the combined USB port. A versatile connectivity solution, the card features built-in port multiplier support, allowing multi-drive eSATA storage enclosures to be connected to the host computer using a single eSATA cable. Taking advantage of the transfer speed of eSATA connection and the 5V power output of the USB 2.0 port, the ExpressCard Power eSATA adapter is the perfect answer for connecting compatible mobile drive enclosures, similar to the built-in power eSATA port provided by the following laptop computers: Toshiba: Satellite E105, A350, Satellite Pro P300; Qosmio G50, X305, Portege A600, M750, R500, R600; and Tecra M10, R10, A10. Dell: Studio 15, 17; Latitude E6400, E6500; Precision M2400, M4400, M6400, M6400 Covet. Applications Connects to eSATA SSD Flash drives, such as OCZ Throttle, Kangaru e-Flash drives and Ridata Racer series flash drives Provides connectivity between Notebooks and PCs with ExpressCard slots to external drive enclosures with Power eSATA (eSATA+USB) port, or with regular eSATA
    [Show full text]
  • Upgrading and Repairing Pcs, 21St Edition Editor-In-Chief Greg Wiegand Copyright © 2013 by Pearson Education, Inc
    Contents at a Glance Introduction 1 1 Development of the PC 5 2 PC Components, Features, and System Design 19 3 Processor Types and Specifications 29 4 Motherboards and Buses 155 5 BIOS 263 UPGRADING 6 Memory 325 7 The ATA/IDE Interface 377 AND 8 Magnetic Storage Principles 439 9 Hard Disk Storage 461 REPAIRING PCs 10 Flash and Removable Storage 507 21st Edition 11 Optical Storage 525 12 Video Hardware 609 13 Audio Hardware 679 14 External I/O Interfaces 703 15 Input Devices 739 16 Internet Connectivity 775 17 Local Area Networking 799 18 Power Supplies 845 19 Building or Upgrading Systems 929 20 PC Diagnostics, Testing, and Maintenance 975 Index 1035 Scott Mueller 800 East 96th Street, Indianapolis, Indiana 46240 Upgrading.indb i 2/15/13 10:33 AM Upgrading and Repairing PCs, 21st Edition Editor-in-Chief Greg Wiegand Copyright © 2013 by Pearson Education, Inc. Acquisitions Editor All rights reserved. No part of this book shall be reproduced, stored in a retrieval Rick Kughen system, or transmitted by any means, electronic, mechanical, photocopying, Development Editor recording, or otherwise, without written permission from the publisher. No patent Todd Brakke liability is assumed with respect to the use of the information contained herein. Managing Editor Although every precaution has been taken in the preparation of this book, the Sandra Schroeder publisher and author assume no responsibility for errors or omissions. Nor is any Project Editor liability assumed for damages resulting from the use of the information contained Mandie Frank herein. Copy Editor ISBN-13: 978-0-7897-5000-6 Sheri Cain ISBN-10: 0-7897-5000-7 Indexer Library of Congress Cataloging-in-Publication Data in on file.
    [Show full text]
  • Certif Ication Handbook
    Certification Handbook EXAM FC0-U51 TM TM CompTIA® IT Fundamentals™ (Exam FC0-U51) CompTIA® IT Fundamentals™ (Exam FC0-U51) 2 Chapter # | Name of chapter CompTIA® IT Fundamentals™ (Exam FC0-U51) CompTIA® IT Fundamentals™ (Exam FC0-U51) Part Number: 099004 Course Edition: 1.0 Acknowledgements We wish to thank the following project team for their contributions to the development of this certification study guide: Pamela J. Taylor, Laurie A. Perry, Gail Sandler, Jason Nufryk, Alex Tong, and Catherine M. Albano. Notices DISCLAIMER While CompTIA Properties, LLC takes care to ensure the accuracy and quality of these materials, we cannot guarantee their ac- curacy, and all materials are provided without any warranty whatsoever, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. The name used in the data files for this course is that of a fictitious com- pany. Any resemblance to current or future companies is purely coincidental. We do not believe we have used anyone’s name in creating this course, but if we have, please notify us and we will change the name in the next revision of the course. Use of screenshots, photographs of another entity’s products, or another entity’s product name or service in this book is for edito- rial purposes only. No such use should be construed to imply sponsorship or endorsement of the book by, nor any affiliation of such entity with CompTIA Properties, LLC. This courseware may contain links to sites on the internet that are owned and operated by third parties (the “External Sites”).
    [Show full text]
  • Esatap Back Plate Adapter
    eSATAp Back Plate Adapter User Manual English LINDY No. 70534, 70539 (2 Port) www.lindy.com © LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (October 2009) User Manual Introduction English Thank you for purchasing the 12V enabled eSATAp Back Plate Adapter. This adapter combines a 5V & 12V Power-Over-eSATA port with a USB port. The 12V enabled eSATAp technology supports connection to 2.5” and 3.5” SATA drives without the need for a separate power adapter – the power can be driven from the 12V enabled eSATAp port using separately available 5 or 12V enabled eSATAp cables. Please note: when converting an internal SATA port from a motherboard, or add-on card, to an external eSATAp port, the 1m maximum cable length for internal SATA ports should be taken into account when calculating the total cable length (i.e. internal plus external eSATA cable). The power from the adapter’s USB/eSATAp port exceeds the 5V 500mA usually available from standard USB ports. The power is limited only by the computer’s ATX power supply connected to the adapter. This allows USB or eSATA 2.5” HDD enclosures to supply enough power to operate the hard drive over a single eSATAp connection. Einführung Deutsch Herzlichen Glückwunsch zum Erwerb dieses 12V eSATAp Slotblechadapters. Er stellt Ihnen eine kombinierten 12V und 5V Power-over-eSATA/USB Anschluss zur Verfügung. Er ermöglicht den sicheren Betrieb von 2,5“ und 3,5“ SATA Festplatten und Gehäusen über nur eine Kabelverbindung bei Verwendung der entsprechenden 5V oder 12V eSATAp Kabel. Bitte beachten Sie, dass bei Adaptierung eines internen Mainboard SATA Ports zu einem eSATA Port nach wie vor die maximale (Gesamt-)Kabellänge 1m nicht überschreiten soll! Aus dem eSATAp Anschluss können mehr als die üblichen 5V 500mA wie aus einem USB Port entnommen werden.
    [Show full text]
  • Technical Reference Manual
    PIP3x High-Tech • Made in Switzerland Technical Reference Manual PACKED INDUSTRIAL PC WITH INTEL CORE i PROCESSOR The PIP is a low power, highly integrated rugged industrial PC with a specially designed aluminum housing. This allows to operate the PIP in a moderate or also in a harsh environment without fan or ventilation holes. The design integrates standard connectors for easy connection. Therefore the PIP can be used for any PC application where a complete solution is needed. The PIP housing, available in different sizes, offers space for miscellaneous add-ons. With the integrated SATA ports, the PCI/104-Express interface and the two PCI-Express Full-Mini Card sockets there are flexible expansion interfaces available. Fully bootable flash disks are supported for shock and vibration critical projects. Particular precautions have been taken that the entire system EMC is within the CE and FCC limits. All these features make the PIP the ideal solution for the industry wherever a flexible, rugged, durable and complete Industrial PC is needed. Features: ● PIP31: Celeron 927UE 1.5 GHz single core with ● Two SATA 2.0 ports (3 Gb/s) 1.0 MiB Cache ● One eSATAp port (with USB 2.0 and SATA 2.0) ● PIP32: Celeron 1047UE 1.4 GHz dual core with ● One ePCIe x1 External Cabling port (500 MB/s) 2 MiB Cache ● Two serial ports with RS232 interface ● PIP37: 3rd Gen Core i7-3517UE 1.7 GHz dual ● Two serial ports with RS232 or RS485 interface core with 4 MiB Cache (optional) ● PIP38: 3rd Gen Core i7-3555LE 2.5 GHz dual ● One PCI/104-Express Type 1 connector
    [Show full text]
  • 201 9 Computex
    COMPUTEX 201 9 www.tragant.de PAGE OF CONTENTS COMPUTEX 2019 USB tester with LED indiccator Contents 02 60 for Volt and Ampere 03 Navilock (GPS) 63 Camera module 19 Active Optical Cable (AOC) 73 Antenna IO card 26 CFexpress 75 DP adapter 31 UFS 77 SATA 8 Pin Power 34 USB 3.1 Gen 2 internal 83 M.2 NGFF 40 SATA express & SFF 85 Thunderbolt™ 49 CFast II 98 eSATAp 3 in 1 GPS www.navilock.de 3 www.navilock.de 60325 / NL-3330 GPS L1 Serial GNSS Receiver M8 MediaTek MT3333 1575.4200 MHz Receiver with M8 waterproof connector (for optional connecting cables) MediaTek MT3333 receiver accepts the signals of up to 33 satellites GLONASS L1 at the same time 1602 (k x 0.5625) MHz black 0.5 m MT3333 waterproof Muliti-interfaces Optional connecting cable Open Wires USB TYPE-A USB Mini-B 0.5 m 1 pitch 2.54 mm female USB TYPE-C™ Extension Cable LxWxH: ca.65 x 45 x 22 mm Stereo angled plug USB Micro-B OTG Adaptor Cable 1 M8 Navilock waterproof connection plug DB9 jack RS-232 UPDATE START START Windows Linux update rate Sensibility max Cold start in Hot start in Protection class Vista/7/8.1/10 Kernel 2.6 1 - 10 Hz -165 dBm 34 second 1 second IPX6 台灣新北市23141新店區民權路108-2號7樓 統一編號：28500879 7F., No.108-2, Minquan Rd., Xindian Dist., New Taipei City 23141, Taiwan Tel: +886-2-22180950 Fax: +886-2-22180990 / 886-2-22180978 E-mail: [email protected] / www.tragant.com.tw / www.delock.com.tw 4 www.navilock.de 60326 / NL-3331 GPS L1 Serial GNSS Receiver M8 MediaTek MT3333 1575.4200 MHz Receiver with M8 waterproof connector (for optional connecting cables) MediaTek MT3333 receiver accepts the signals of up to 33 satellites GLONASS L1 at the same time 1602 (k x 0.5625) MHz Roof mounting and waterproof housing (IPX7) black 0.5 m MT3333 waterproof Muliti-interfaces Optional connecting cable Open Wires USB TYPE-A USB Mini-B 0.5 m 1 pitch 2.54 mm female USB TYPE-C™ Extension Cable Ø x H: ca.
    [Show full text]
  • Fitlet Products Overview
    May 2017 Fitlet Products Overview Maxim Birger Content AMD A/E-Series “Steppe Eagle” System-on-Chip fitlet Product Brief Features Highlight, Top Level Block Diagrams Models and Processor SKUs Memory Interface Graphics and Display Interface Storage Interface Connectivity Power & Environmental Characteristics Industrial Functionality FACET Cards AMD A/E-Series x86 Mobile System-on-Chip fitlet – Operating Systems Windows 10 Windows 8 Windows 7, 32/64-bit Linux Mint 17, 32/64-bit Linux Ubuntu, 32/64-bit Other Linux distros can be verified by customers Embedded versions fitlet – Front/Back Panel View fitlet products family – features highlight Platform AMD A/E-Series SoC. Low power systems @ 4.5W – 10.5W Quad/Dual core 64-bit @ 1.0GHz – 2.2GHz Up to 8GB DDR3L-1333 SDRAM (1.35V) mSATA SSD storage Connectivity fitlet-i expansion Dual HDMI display interface eSATAp/USB2 combo Analog/digital audio input/output LAN2 (2nd Intel GbE) Intel GbE LAN x1 fitlet-X expansion Intel dual band WLAN 802.3 ac + Bluetooth 4.0 Extended PCIe interface USB3.0 x2, USB2.0 x3/x4 FACET Card Micro SD slot accept SD/SDHC/SDXC cards RS232 serial port x1 OS Micro SIM slot Windows 7/8/10 Linux * fitlet-B models supplied with simple WLAN 802.11b/g/n Wifi module fitlet products family – B/i/X demystify fitlet-B Entry level model Outstanding performance/cost ratio fitlet-i and fitlet-iA10 Advanced models featuring AMD A4 Micro-6400T and A10 Micro-6700T System-on-Chip Richest connectivity for the size Dual GbE LAN, micro SD socket,
    [Show full text]
  • Connectivity Chapter 2 This Presentation Covers
    Connectivity Chapter 2 This presentation covers: >Computer Ports > Devices Connected to Ports The purpose of various computer ports What to do if you don’t have a particular port What types of devices connect to specific ports Symbols and colors associated with particular ports External Connectivity • A port: is a connector on a motherboard or on a separate adapter that allows a device to connect to a computer. • Many port connections are either male or female. • Male ports: have metal pins that protrude from the connector. A male port requires a cable with a female connector. • Female ports: have holes in the connector into which the male cable pins are inserted. External Connectivity • Some connectors on integrated motherboards are either D-shell connectors (They are named for their characteristic D-shaped metal shield) or DIN connectors. (A DIN connector is an electrical connector that was originally standardized by the Deutsches Institut für Normung (DIN), the German national standards organization) • A D-shell connector (sometimes called a D-sub): has more pins or holes on top than on the bottom, so a cable connected to the D-shell connector can be inserted in only one direction. • Many documents represent a D-shell connector by using the letters DB, a hyphen, and the number of pins—for example, DB-9, DB-15, or DB-25. External Connectivity • A mini-DIN-6 connector: is round with small holes and is normally keyed. When a connector is keyed, the cable can be inserted only one way. • Keyboard and mouse connectors, commonly called PS/2 ports(Its name comes from the IBM Personal System/2 series of personal computers), are examples of mini-DIN connectors.
    [Show full text]
  • Peripheral Devices
    Peripheral Devices 4 I/O Cards . 4.02 - 4.03 Card Readers . 4.04 - 4.05 HDD Enclosures / Mobile Racks. 4.06 - 4.08 PC Power Supplies . 4.09 Coolers / Fans . 4.09 Keypad / Keyboard. 4.09 Mounting Material . 4.09 Mouses . 4.10 Presenters . 4.10 4 Peripheral Devices A C B D E G F H I J VALUE I/O Cards Upgrade your PC with additional interfaces • PCI adapters K like e.g. USB 2.0, USB 3.0, FireWire (IEEE 1394), • PCI-Express adapters Serial ATA and EPP/ECP parallel resp. RS232 • ExpressCard/34/54 adapters serial ports. • Contents: Adapter, driver CD, manual L Order-No. – Packing Unit VALUE PCI Adapter, 1 Parallel ECP/EPP Port A 15.99.2088 – 20 VALUE PCI Adapter, 2 Serial RS232, D-SUB 9 Port B 15.99.2086 – 20 VALUE PCI Adapter, 4+1 USB 2.0 Ports C 15.99.2159 – 20 VALUE PCI Adapter, 3x IEEE 1394a (FireWire 400) Ports D 15.99.2182 – 10 VALUE PCI-Express Adapter, 2 internal SATA 3.0 Gbit/s Ports E 15.99.2128 – 10 VALUE PCI-Express Adapter, 1x Parallel ECP/EPP Port F 15.99.2114 – 10 VALUE PCI-Express Adapter, 2x RS232 D-Sub 9 + 1x EPP/ECP Ports G 15.99.2116 – 10 VALUE PCI-Express Adapter, 2x Serial RS232 D-Sub 9 Ports H 15.99.2118 – 10 VALUE PCI-Express Adapter, 2x USB 3.0, 5 Gbit/s I 15.99.2113 – 5 VALUE PCI ExpressCard, 2x SATA 6.0 Gbit/s + 1x IDE internal J 15.99.2131 – 5 VALUE ExpressCard/34, 1x Serial RS232 D-Sub 9 Port K 15.99.2147 – 10 VALUE ExpressCard/34, 2x USB 3.0, 5 Gbit/s L 15.99.2112 – 5 Order-No.
    [Show full text]
  • Introduction
    eXtrending your Vision User Manual Introduction Dear customer, Thank you for choosing Xtrend. This user manual will assist you to install the Xtrend box successfully and to get familiar with numerous features. The Xtrend ET7500 and ET7000 is a new generation of Full HD Linux receiver with 2,000 DMIPS, 512MB DDR3, and an eSATAp port, which you can also use as an USB port. You can experience unlimited possibilities with the new Xtrend receivers. The ET7500 and ET7000 allow you to experience various features such as web browser, media player, HbbTV, and other multimedia features. In order to extend your experience, you can install various plugins on your Xtrend box. We strongly recommend reading the user manual before using your Xtrend box. For any further questions, please visit http://www.et-view.net We wish you a great experience with your Xtrend Box. Best regards, Xtrend Team 1 eXtrending your Vision User Manual Table of Contents (A) Safety Instructions................................................................................................................................... 3 (B) Main Features ......................................................................................................................................... 5 (C) Specification ............................................................................................................................................ 6 (D) Packaging Contents .................................................................................................................................
    [Show full text]
  • USB 3.0/Esatap 2.5” SATA HDD/SSD Enclosure S251SMU33EP
    USB 3.0/eSATAp 2.5” SATA HDD/SSD Enclosure S251SMU33EP *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.com Manual Revision: 08/19/2014 FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com.
    [Show full text]
  • P270WM – Panther 4.0 Product Overview
    Table of Contents Innovations 3 Key Technologies Chipset 4 UEFI 5 VGA 6 Storage 7 Security 8 Design Principles 9 Product Roles 10-15 Product Overview 16-22 Innovations Intel ‘Sandy Bridge – E’ platform High performance Intel X79 desktop chipset Intel Core i7 and Xeon E5-2600 series desktop processors Four memory sockets Firmware supports UEFI HDMI 1.4a, DP 1.2 Dual GPU solution – SLI/CF ready Key Technologies – X79 Chipset LGA2011 Socket (Sandy Bridge –E) Quad channel via 4 DDR3 slots 1. Up to 32GB RAM 2. Planned 64GB support 3. Supports 1333MHz & 1600MHz CPU classes 1. Workstation - i7 3xx0 series 2. Gaming - i7 39x0X Extreme series 3. Server - Xeon E5 series Planned support for future Ivy Bridge – E CPUs Key Technologies - UEFI Universal Extensible Firmware Interface Evolution of BIOS technology Boot from 2TB+ disks Faster boot up time Web access in pre-OS environment Key Technologies - VGA Dual MXM 3.0b VGA cards – 100W each. up to NVIDIA GTX 980M or AMD R9-M290X. SLI/CrossFireX ready. Supports NVIDIA Quadro cards – up to 5100M. Key Technologies - Storage Supports 3 disks + optical. Optical drive can be swapped for 4th disk. RAID 0/1/5/10 supported. Two SATA 6Gbp/s ports. Key Technologies - Security Includes Trusted Platform Module. Stores keys on hardware for increased security Each TPM has a unique RSA key for computer verification. Biometric fingerprint scanner Design Principles Long lifespan Fully upgradeable Choices – configurable to meet your needs Heavy-duty construction designed for occasional abuse Easy deployment – single image across all units Low TCO (hardware, software & support costs) Product Roles 1.
    [Show full text]