DOCSLIB.ORG

Peripheral Devices

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Peripheral Devices Peripheral Devices 4 I/O Cards . 4.02 - 4.03 Card Readers . 4.04 - 4.05 HDD Enclosures / Mobile Racks. 4.06 - 4.08 PC Power Supplies . 4.09 Coolers / Fans . 4.09 Keypad / Keyboard. 4.09 Mounting Material . 4.09 Mouses . 4.10 Presenters . 4.10 4 Peripheral Devices A C B D E G F H I J VALUE I/O Cards Upgrade your PC with additional interfaces • PCI adapters K like e.g. USB 2.0, USB 3.0, FireWire (IEEE 1394), • PCI-Express adapters Serial ATA and EPP/ECP parallel resp. RS232 • ExpressCard/34/54 adapters serial ports. • Contents: Adapter, driver CD, manual L Order-No. – Packing Unit VALUE PCI Adapter, 1 Parallel ECP/EPP Port A 15.99.2088 – 20 VALUE PCI Adapter, 2 Serial RS232, D-SUB 9 Port B 15.99.2086 – 20 VALUE PCI Adapter, 4+1 USB 2.0 Ports C 15.99.2159 – 20 VALUE PCI Adapter, 3x IEEE 1394a (FireWire 400) Ports D 15.99.2182 – 10 VALUE PCI-Express Adapter, 2 internal SATA 3.0 Gbit/s Ports E 15.99.2128 – 10 VALUE PCI-Express Adapter, 1x Parallel ECP/EPP Port F 15.99.2114 – 10 VALUE PCI-Express Adapter, 2x RS232 D-Sub 9 + 1x EPP/ECP Ports G 15.99.2116 – 10 VALUE PCI-Express Adapter, 2x Serial RS232 D-Sub 9 Ports H 15.99.2118 – 10 VALUE PCI-Express Adapter, 2x USB 3.0, 5 Gbit/s I 15.99.2113 – 5 VALUE PCI ExpressCard, 2x SATA 6.0 Gbit/s + 1x IDE internal J 15.99.2131 – 5 VALUE ExpressCard/34, 1x Serial RS232 D-Sub 9 Port K 15.99.2147 – 10 VALUE ExpressCard/34, 2x USB 3.0, 5 Gbit/s L 15.99.2112 – 5 Order-No. Picture Interfaces Connectors Card type RAID function 15.99.2088 A LPT 1-3 1x DB25 F external PCI - 15.99.2086 B COM 1-256 2x DB9 M external PCI - 15.99.2159 C USB 2.0 4x USB 2.0 Type A external/1x USB Type A internal PCI - 15.99.2182 D IEEE 1394 (FireWire) 3x 6-pin IEEE 1394 F external PCI - 15.99.2128 E SATA 3.0 Gbit/s 2x 7-pin SATA F internal PCI-Express x1 RAID 0,1,0+1 15.99.2114 F LPT 1-3 1x DB9 M PCI-Express x1 - 15.99.2116 G COM 1-256, LPT 1-3 2x DB9 M/1x DB25 F PCI-Express x1 - 15.99.2118 H COM 1-256 2x DB9 M PCI-Express x1 - 15.99.2113 I USB 3.0 2x USB 3.0 Type A PCI-Express x1 - 15.99.2131 J SATA 6.0 Gbit/s, IDE 2x 7-pin SATA/1x IDE internal PCI-Express x1 - 15.99.2147 K COM 1-256 1x DB9 M ExpressCard/34 - 15.99.2112 L USB 3.0 2x USB 3.0 Type A ExpressCard/34 - 4.02 Peripheral Devices 4 A B C D E H F G I ROLINE I/O Cards Upgrade your PC with additional interfaces • Cardbus adapters like e.g. USB 2.0, USB 3.0, SATA and parallel • ExpressCard/34/54 adapters EPP/ECP resp. RS-232 serial ports. J Choose between follwoing ROLINE quality • Contents: Adapter, driver CD, manual adapters: • PCI adapters • PCI-Express adapters Order-No. – Packing Unit K ROLINE PCI Adapter, 4 USB 2.0 Ports A 15.06.2170 – 10 ROLINE PCI Adapter, 2 USB 3.0 Ports B 15.06.2116 – 10 ROLINE PCI-Express Adapter, 2 internal SATA 3.0 Gbit/s Ports C 15.06.2126 – 20 ROLINE PCI-Express Adapter, 1+1x SATA 3.0 Gbit/s Ports D 15.06.2127 – 20 ROLINE PCI-Express Adapter, 2x eSATAp+USB E 15.06.2128 – 5 ROLINE PCI-Express Adapter, 2 USB 3.0 Ports F 15.06.2113 – 10 ROLINE PCI-Express Adapter, 1+1x SATA 6.0 Gbit/s G 15.06.2130 – 10 ROLINE PCI ExpressCard, 2x SATA 6.0 Gbit/s + 1x IDE internal H 15.06.2131 – 10 ROLINE ExpressCard/34, 1x RS232 Port I 15.06.2147 – 20 ROLINE ExpressCard/34 to CardBus Adapter J 15.06.2149 – 10 L ROLINE ExpressCard/34, 1x eSATAp + USB K 15.06.2129 – 5 M ROLINE ExpressCard/34, 2x USB 3.0, 5.0 Gbit/s L 15.06.2114 – 10 ROLINE ExpressCard/34, Slim, 1x USB 3.0 M 15.06.2115 – 10 Order-No. Picture Interfaces Connectors Card type RAID function 15.06.2170 A USB 2.0 4x USB 2.0 Type A external PCI - 15.06.2116 B USB 3.0 2x USB 3.0 Type A external PCI - 15.06.2126 C SATA 3.0 Gbit/s 2x 7-pin SATA internal PCI-Express x1 - 15.06.2127 D SATA 3.0 Gbit/s 1x 7-pin SATA internal/1x 7-pin eSATA external PCI-Express x1 - 15.06.2128 E SATA 3.0 Gbit/s+USB 2x Power over eSATA + USB external PCI-Express x1 RAID 5 15.06.2113 F USB 3.0 2x USB 3.0 Type A external PCI-Express x1 - 15.06.2130 G SATA 6.0 Gbit/s 1x 7-pin SATA internal/1x 7-pin eSATA external PCI-Express x1 - 15.06.2131 H SATA 6.0 Gbit/s, IDE 2x 7-pin SATA/1x IDE internal PCI-Express x1 - 15.06.2147 I COM 1-256 1x DB9 M ExpressCard/34 - 15.06.2149 J CardBus 1x CardBus ExpressCard/34 - 15.06.2129 K SATA 3.0 Gbit/s+USB 1x Power over eSATA + USB Type A ExpressCard/34 - 15.06.2114 L USB 3.0 2x USB 3.0 Type A ExpressCard/34 - 15.06.2115 M USB 3.0 1x USB 3.0 Type A ExpressCard/34 - 4.03 4 Peripheral Devices Mobile MicroSD Card Reader VALUE Card Reader Stick, USB 2.0 MicroSD Card Reader with minimum USB-form • Remark: Memory card not included in Smart combination of USB stick and card • USB bus-powered, no external power supply factor. It’s so small that it can be left perma- delivery reader – perfect for mobile users needed nently inside the notebook. • Card Reader/Writer for the most popular • Dimensions: 70 x 25 x 20 mm • Reads and writes MicroSD cards memory cards: SD, MMC, MMC, MS and • Supports Windows 2000/ME/XP/Vista • USB 2.0 and USB 1.1 compatible many more • Ultra small design • Supports Extended Capacity SD memory • Remark: Memory cards not included • Key chain with screw up function for easy cards (SDXC) handling, storage and transportation • Compact and flat design • Dimensions: 22 x 15 x 7 mm • Supports USB 2.0 • Color: Black • Power LED indicator • Plug & play, hot-swappable • Contents: Card Reader, key chain Order-No. – Packing Unit Order-No. – Packing Unit Mobile MicroSD Card Reader black 15.08.6209 – 10 VALUE Card Reader Stick, USB 2.0, Multi black 15.99.6248 – 20 VALUE USB 2.0 Multi Card Reader, internal ROLINE Internal USB 3.0 Card Reader • Read and write to the most popular flash • LED indication for power and access • Can be installed in any available type 3.5 or • Supports Extended Capacity SD memory cards like e.g.: SD, SDHC, MicroSD (TF), CF, • Plug & play 5.25 (adapter frame included) device bay cards (SDXC) MD, MMC, MS • Bus powered, no external power supply • Supports SuperSpeed USB 3.0, compliant • For installation in a type 3.5 PC slot required with USB 2.0, USB 1.1 • Contents: Card reader, USB 3.0 cable (1.4 m), • Additional 1x USB port • Card Reader works with multiple media, as type 5.25 adapter frame, screws, slot bracket • USB 2.0 and USB 1.1 compatible • Contents: Card reader with molded internal e.g. CF (Compact Flash) Card I/II, SD (Secure • High Speed interface with transfer rates up connection cable, screws Digital) Card, SDHC, SDXC, MMC (MultiMedia to 480 Mbit/s Card), MS (Memory Stick), MS Pro, MS Duo, MS Micro, MS Pro-HG, MS XC, microSD and many variants Order-No. – Packing Unit Order-No. – Packing Unit VALUE USB 2.0 Multi Card Reader, internal black 15.99.6218 – 10 ROLINE Internal USB 3.0 Card Reader black 15.08.6251 – 10 VALUE USB 2.0 Multi Card Reader, external VALUE USB 2.0 Notebook Card Reader 50+ • Multi card reader supports various types of • Bus powered, no external power supply • Read and write to the most popular flash • Dimensions (WxDxH): 40 x 67 x 13 mm flash cards like e.g. SD, SDHC, Micro SD (TF), required cards like e.g.: SD, SDHC, MicroSD (TF), CF, • Contents: Card Reader, USB cable (75 cm) CF, MD, MMC, MS • Plug & play MD, MMC, MS • USB 2.0 and USB 1.1 compatible • Contents: • USB 2.0, compatible with USB 1.1 • LED indicator for power and access Card Reader, USB cable • Compact and handy design for mobile use • Plug & play, hot-swapping • Power and Read/Write LED indicator • USB Bus-powered, no external power supply needed Order-No. – Packing Unit Order-No. – Packing Unit VALUE USB 2.0 Mini Card Reader 50+, external white/black 15.99.6249 – 10 VALUE USB 2.0 Notebook Card Reader 50+ white/black 15.99.6231 – 20 4.04 Peripheral Devices 4 ROLINE USB 2.0 Notebook Card Reader 50+ VALUE USB 3.0 Multi Card Reader, external • Read & write to the most popular flash cards • LEDs for status indication • Supports various types of flash cards like e.g.
Load more

Recommended publications
  • Ling Chia Wang (Student) and Masato R. Nakamura (Advisor) Background Objectives Comparison of PC Cooling Systems Summary Summer
    Heat Transfer Analysis of Computer Components for Electronic Waste (e-waste) Reduction: Cardboard PC Case Design Project Ling Chia Wang (student) and Masato R. Nakamura (advisor) Department of Mechanical Engineering and Industrial Design Technology New York City College of Technology (City Tech), City University of New York (CUNY), Brooklyn, NY 11201 Background Comparison of PC Cooling Systems Cardboard PC Case Design Fans Low-noise CPU cooler GPU HDD and Reducing electric wastes (e-wastes) has been one of the main concerns DVD/Blu-ray Drive • A low-noise CPU cooler was proposed in 2012 that provides a more efficient heat in sustainable solid waste management since the development of dissipation capacity from the CPU to a finned heatsink without adding more heat pipes at Information Technology (IT) was started to accelerate. a lownoise level of a small fan under the confined space constraints of a computer chassis. Computational fluid dynamics (CFD) simulations were used to search for a • A short life cycle of computers demands an efficient recycling process, as 2 proper cooling design . Motherboard well as re-design of computer components. • E-waste of desktop PC in China and South Africa will rise by 500% in 2020 compared to their 2007 levels. Summary • One of the major components of desktop computers is a PC case: 49.8% by weight of wasted desktop computers. • During the e-waste recycling process, dismantling obsolete computers 2 Figure 5: Tentative design of cardboard PC (mainly liberating components from computer cases) takes a lot of Figure 2: schematic diagram of cooler (left), calculated temperature distribution (center), calculated velocity distribution (right) workload of skilled workers.
    [Show full text]
  • Firewire 800 Expresscard 34
    FireWire 800 ExpressCard 34 Two FireWire 800 Ports for Your Laptop Quick and Easy Upgrade Simple and Mobile Now you can affordably upgrade your Mac® or PC laptop to Installation is extremely easy; there’s no need to install any driver fast FireWire 800 connectivity with the LaCie FireWire 800 software because the LaCie FireWire 800 ExpressCard 34 is ExpressCard 34*. It provides two independent 9-pin 1394b driver-free for computers running on Windows® XP, Vista®, or 7 bilingual ports so you can connect two external FireWire 800 or Mac OS X 10.5 or higher. It’s small and lightweight for easy devices simultaneously. Since it’s plug & play and hot-pluggable, transporting and provides a communication distance of up to 100 you can quickly attach your favorite peripherals such as hard drives, meters. Whether you and your laptop are at home, at work or on CD/DVD drives, scanners, printers, etc. and use them instantly. the road, just plug it into an ExpressCard 34 or 54 slot and enjoy making new connections. Connect FireWire Devices Multiple Uses The LaCie FireWire 800 ExpressCard 34 can run at 800Mbits/s This “all-in-one” FireWire host solution is the ideal combination of or 400Mbits/s because it’s also FireWire 400 (IEEE 1394a) wide compatibility and speedy performance. Whether you want to backward compatible. In addition, it can support 200Mbits/s back up data from your laptop to your external LaCie hard disk, and 100Mbits/s devices. Based on the IEEE 1394b chipset from capture video from your camcorder, or download photos from your Texas Instruments, it’s a versatile FireWire solution that’s i.LINK camera, the LaCie FireWire 800 ExpressCard 34 is the right choice compatible and OHCI compliant.
    [Show full text]
  • Getting Started with Your VXI-1394 Interface for Windows NT/98 And
    VXI Getting Started with Your VXI-1394 Interface for Windows NT/98 VXI-1394 Interface for Windows NT/98 November 1999 Edition Part Number 322109D-01 Worldwide Technical Support and Product Information www.ni.com National Instruments Corporate Headquarters 11500 North Mopac Expressway Austin, Texas 78759-3504 USA Tel: 512 794 0100 Worldwide Offices Australia 03 9879 5166, Austria 0662 45 79 90 0, Belgium 02 757 00 20, Brazil 011 284 5011, Canada (Calgary) 403 274 9391, Canada (Ontario) 905 785 0085, Canada (Québec) 514 694 8521, China 0755 3904939, Denmark 45 76 26 00, Finland 09 725 725 11, France 01 48 14 24 24, Germany 089 741 31 30, Greece 30 1 42 96 427, Hong Kong 2645 3186, India 91805275406, Israel 03 6120092, Italy 02 413091, Japan 03 5472 2970, Korea 02 596 7456, Mexico (D.F.) 5 280 7625, Mexico (Monterrey) 8 357 7695, Netherlands 0348 433466, Norway 32 27 73 00, Poland 48 22 528 94 06, Portugal 351 1 726 9011, Singapore 2265886, Spain 91 640 0085, Sweden 08 587 895 00, Switzerland 056 200 51 51, Taiwan 02 2377 1200, United Kingdom 01635 523545 For further support information, see the Technical Support Resources appendix. To comment on the documentation, send e-mail to [email protected] © Copyright 1998, 1999 National Instruments Corporation. All rights reserved. Important Information Warranty The National Instruments VXI-1394 board is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National Instruments will, at its option, repair or replace equipment that proves to be defective during the warranty period.
    [Show full text]
  • A Technology Comparison Adopting Ultra-Wideband for Memsen’S File Sharing and Wireless Marketing Platform
    A Technology Comparison Adopting Ultra-Wideband for Memsen’s file sharing and wireless marketing platform What is Ultra-Wideband Technology? Memsen Corporation 1 of 8 • Ultra-Wideband is a proposed standard for short-range wireless communications that aims to replace Bluetooth technology in near future. • It is an ideal solution for wireless connectivity in the range of 10 to 20 meters between consumer electronics (CE), mobile devices, and PC peripheral devices which provides very high data-rate while consuming very little battery power. It offers the best solution for bandwidth, cost, power consumption, and physical size requirements for next generation consumer electronic devices. • UWB radios can use frequencies from 3.1 GHz to 10.6 GHz, a band more than 7 GHz wide. Each radio channel can have a bandwidth of more than 500 MHz depending upon its center frequency. Due to such a large signal bandwidth, FCC has put severe broadcast power restrictions. By doing so UWB devices can make use of extremely wide frequency band while emitting very less amount of energy to get detected by other narrower band devices. Hence, a UWB device signal can not interfere with other narrower band device signals and because of this reason a UWB device can co-exist with other wireless devices. • UWB is considered as Wireless USB – replacement of standard USB and fire wire (IEEE 1394) solutions due to its higher data-rate compared to USB and fire wire. • UWB signals can co-exists with other short/large range wireless communications signals due to its own nature of being detected as noise to other signals.
    [Show full text]
  • ECESATUSB1 This Expresscard Power Esata Port Controller Card
    1 Port ExpressCard Power eSATA Controller Adapter Card StarTech ID: ECESATUSB1 This ExpressCard Power eSATA port controller card can be installed in an available ExpressCard 34/54 mm slot to provide a powered eSATA connection, and also alternatively provide either external SATA (data only) or USB 2.0 connectivity from one uniquely designed port if using with standard eSATA or USB devices. An ideal solution for using an eSATA SSD Flash drive on your laptop, the power eSATA card delivers both a high speed eSATA connection and power from the combined USB port. A versatile connectivity solution, the card features built-in port multiplier support, allowing multi-drive eSATA storage enclosures to be connected to the host computer using a single eSATA cable. Taking advantage of the transfer speed of eSATA connection and the 5V power output of the USB 2.0 port, the ExpressCard Power eSATA adapter is the perfect answer for connecting compatible mobile drive enclosures, similar to the built-in power eSATA port provided by the following laptop computers: Toshiba: Satellite E105, A350, Satellite Pro P300; Qosmio G50, X305, Portege A600, M750, R500, R600; and Tecra M10, R10, A10. Dell: Studio 15, 17; Latitude E6400, E6500; Precision M2400, M4400, M6400, M6400 Covet. Applications Connects to eSATA SSD Flash drives, such as OCZ Throttle, Kangaru e-Flash drives and Ridata Racer series flash drives Provides connectivity between Notebooks and PCs with ExpressCard slots to external drive enclosures with Power eSATA (eSATA+USB) port, or with regular eSATA
    [Show full text]
  • In This Video We Are Going to See How a Personal Computer Hardware Is Organised the PC Was Designed with an Open Architecture
    In this video we are going to see how a personal computer hardware is organised The PC was designed with an open architecture. This means that it uses standard modular components. We can add, replace, update or swap them easily and the computer will identify and handle the new devices automatically. The main component of a computer system is the motherboard or main board. It is a printed circuit board (PCB) that holds the main components of the computer and the electronics needed to communicate between them and to expand the system. We could say that it is the central nervous system of the computer. A motherboard provides the electrical connections by which the other components of the system communicate. Unlike a backplane, it also contains the central processing unit and hosts other subsystems and devices The form factor is the specification of a motherboard – the dimensions, power supply type, location of mounting holes, number of ports on the back panel, etc. In the IBM PC compatible industry, standard form factors ensure that parts are interchangeable across competing vendors and generations of technology, while in enterprise computing, form factors ensure that server modules fit into existing rack mount systems. Traditionally, the most significant specification is for that of the motherboard, which generally dictates the overall size of the case. The most used form factor for IBM PC compatible motherboards is ATX (Advanced Technology Extended) and its derivatives. For small form factor mainboards mini ITX is the de facto standard. A power supply unit (PSU) converts mains AC to low- voltage regulated DC power for the internal components of a computer.
    [Show full text]
  • Express Complete
    PCI Express Cards . MADE by RME Express Complete HDSPe MADI 128-Channel 192 kHz MADI PCI Express Card While many MADI devices require an additional clock line, HDSPe MADI uses SteadyClockTM to extract the reference clock at lowest jitter directly from the MADI signal, making long-distance connections even more convenient. RME offers several options to build up powerful yet affordable I/O systems. For example in combination with the ADI-648 an 8 x ADAT optical computer interface is realized, unbeatable in price and performance. The ADI-6432 serves as bidirectional AES/EBU frontend with 64 channels I/O. On a powerful PC/Mac three HDSPe MADI can be used at the same time, providing up to 192 inputs and 192 outputs on a single workstation. Specifications What is MADI? ▪ 1 Lane PCI Express endpoint device (no PCI Express to PCI bridge) MADI - Multichannel Audio Digital Interface - ▪ 2.5 Gbps line speed is the perfect solution for the transmission of ▪ Packet-based full-duplex communication (up to 500 MB/s transfer rate) multiple audio channels. A thin cable transmits ▪ All settings changeable in real-time up to 64 audio channels, lossless, over a distance ▪ Automatic and intelligent master/slave clock control of up to 2000 meters! ▪ Sync sources: MADI coaxial, MADI optical, word clock, internal All signals in one direction go through one cable. ▪ Varipitch: by input signal or word clock Only two MADI cables can interface a stage, a ▪ Sample rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, theatre or a conference hall.
    [Show full text]
  • PCI EXPRESS® CARD EDGE CONNECTORS Extend Differential Signaling to 8.0GB/S for New Generation Systems
    BOARD/WIRE-TO-BOARD CONNECTORS PCI EXPRESS® CARD EDGE CONNECTORS Extend differential signaling to 8.0GB/S for new generation systems OVERVIEW These 1.0mm pitch, vertical card edge connectors from FCI enable all generations of PCI Express® signaling in desktop PCs, workstations, and servers. The connector designs provide support for 2.5Gb/s (Gen1), 5.0Gb/s (Gen2), and the recent update to 8.0Gb/s (Gen3) per differential signal pair. The base connector family provides x1, x4, x8, or x16 link widths to suit different bandwidth requirements. The basic bandwidth (x1) version supports a single PCI Express lane and is typically used for I/O cards in desktop PCs. The x4 and x8 connectors provide 64 and 98 contacts, respectively, for server I/O. The high bandwidth versions (x16 lanes and higher) are used for applications that require even more bandwidth, such as graphics cards in desktop PCs or riser cards in servers. FCI’s expansive range of available PCI Express card edge connectors includes options for through-hole solder, press-fit, surface-mount, or straddle-mount termination. FEATURES & BENEFITS TARGET MARKETS/APPLICATIONS • Base connector range offers 1, 4, 8, or 16 serial • Data PCI Express links for different bandwidth requirements • Desktop PCs • Options for through-hole solder, press-fit, • Servers surface-mount, or straddle-mount termination • Workstations • Press-fit version provides a solderless alternative for • Industrial termination to thick PCBs • SHB Express™ backplanes per PICMG 1.3 spec • Larger 200, 230 (x24), and 280-position
    [Show full text]
  • Antec NSK 4482B-GB Owner's Manual
    Antec NSK-4482B Computer Cases owner's manual Free Online Library This website has one of the largest libraries with thousands different manuals and ebooks that will help you to understand absolutely any device and how to use it. Many people are searching for Antec NSK-4482B owner's manual, so you should take a closer look into our library, because we have couple of them right here. Every day we are uploading more informative books and documents about different appliances, devices and software. You can even print these PDF files and have all the necessary papers with you, no matter where you are. Antec NSK-4482B owner's manual Click here to read (36 pages) Browse this massive electronic library for more information about all de This is the list with most popular files that will tell you more about Antec (NSK 4482B-GB) device: Antec Piano Black Quiet Super Mini Tower. EC version setup guide Status: Available Download link: manualstorrent.com/share/12828/setup_guide/Piano-Black-Quiet-Super-Mini-Tower.-EC-version.pdf Antec Piano Black Quiet Super Mini Tower. EC version user guide Status: Available Download link: manualstorrent.com/share/12828/user_guide/Piano-Black-Quiet-Super-Mini-Tower.-EC-version.pdf Antec Piano Black Quiet Super Mini Tower. EC version operating instruction Status: Available Download link: manualstorrent.com/share/12828/operating_instruction/Piano-Black-Quiet-Super-Mini-Tower.-EC- version.pdf Antec 3U20ATX300EC Rack 300W 4x3.5"2x5.25" ATX operating instruction Status: Available Download link: manualstorrent.com/share/12830/operating_instruction/3U20ATX300EC-Rack-300W-4x3.5%
    [Show full text]
  • 2-Port USB 3.0 PCI Express Card USB Peripherals
    Model 8402 2-Port USB 3.0 PCI Express Card USB Peripherals The USRobotics USB 3.0 PCI Express card easily adds 2 USB 3.0 ports to your computer. Connect super speed peripherals like USB 3.0 external hard drives, digital video cameras, high-resolution webcams and save time with faster transfer rates of up to 5 Gbps. The blazing fast 5 Gbps transfer rate is up to 10 times faster than USB 2.0 (480 Mbps). The USB 3.0 ports are backward compatible so while the card is capable of super speed transfers, it also supports USB 2.0 and USB 1.1 speeds. Simultaneous transfers automaticallly detect USB type and transfer data at the maximum rate for each individual port. Blazing Fast data transfer with USB 3.0 USB 3.0 - the new • Connect any USB 3.0 device to your computer • Compatible with USB 3.0 specifi cation standard • Backwards compatible with USB 2.0/1.1 devices Get the speed • Super Speed transfer rates up to 5 Gbps • Up to 10 times faster than USB 2.0 you need • Each port detects native USB speed and transfers data at the maximum rate for each port Powered USB Ports • Each port provides up to 900 mA of power when used with ATX power connector • Ideal for power hungry USB devices Easy Install • Plug & Play • Hot Swappable Applications • Add USB 3.0 connections to a desktop that may only have USB 2.0 or 1.1 • Expand USB connections by adding 2 additional USB ports • Connect additional peripherals such as external hard drives, printers, scanners, digital cameras, video cameras, video surveillance cameras, video display solutions, media devices, etc.
    [Show full text]
  • Quick Start Thank You for Purchasing the MSI® MEG Z390 GODLIKE Motherboard
    Quick Start Thank you for purchasing the MSI® MEG Z390 GODLIKE motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code. Preparing Tools and Components Intel® LGA 1151 CPU CPU Fan Chassis DDR4 Memory Power Supply Unit Graphics Card Thermal Paste SATA Hard Disk Drive SATA DVD Drive Phillips Screwdriver A Package of Screws Quick Start 1 Safety Information y The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. y Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. y Hold the motherboard by the edges to avoid touching sensitive components. y It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. y Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed. y Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case. y Do not boot the computer before installation is completed.
    [Show full text]
  • Fujitsu PCI Expansion Unit
    PCI Expansion Unit The PCI Expansion Unit—an I/O expansion option for Oracle’s Fujitsu SPARC M12 and Fujitsu M10 family of servers—meets demands for applications requiring extensive scalability, mission-critical levels of availability, and Key Features seamless data center integration. The PCI Supports the Fujitsu SPARC M12 and Fujitsu M10 family of servers Expansion Unit takes maximum advantage of Provides 11 PCIe 3.0 slots in a small 2U form factor the high I/O bandwidth of Fujitsu SPARC M12 Powers on and off in synchronization with the power status of Fujitsu and Fujitsu M10 servers. SPARC M12 and Fujitsu M10 servers Enables hot swapping of PCIe cards, power supplies, and fans Monitored and controlled from the XSCF System Monitoring Function of the Fujitsu SPARC M12 and Fujitsu M10 servers Configured with 1 + 1 power supply PRODUCT OVERVIEW redundancy and supports a dual Perfectly suited for Fujitsu SPARC servers, the PCI Expansion Unit offers significant power feed configuration I/O adapter expandability. One or more PCI Expansion Units can be connected to both Fujitsu SPARC M12 and Fujitsu M10 servers, providing connectivity of up to 11 additional PCI Express (PCIe) slots per PCI Expansion Unit in a space-saving rackmount chassis (2U). PCIe generation 3 is supported by the PCI Expansion Unit. Easy Monitoring and Control from Fujitsu SPARC Servers The PCI Expansion Unit can be easily monitored and controlled in conjunction with the XSCF (eXtended System Control Facility) system monitoring function of Fujitsu SPARC servers. PCI Expansion Units power on and off in synchronization with the power status of Fujitsu SPARC servers.
    [Show full text]