INFORMERER Meddelelse Nummer: 140

Total Page:16

File Type:pdf, Size:1020Kb

INFORMERER Meddelelse Nummer: 140 Annonseringsdato: 2009-10-01 INFORMERER Meddelelse nummer: 140 MEDDELELSER FRA NORSK ELEKTROTEKNISK KOMITE IEC-normer og tekniske rapporter CENELEC Europanormer (EN) CENELEC Harmoniseringsdokumenter (HD) Prosjekter under behandling i CENELEC Sortert etter ICS-koder NEK, Boks 280 - 1326 Lysaker Tlf. 67 83 31 00 - Ordretlf. 67 83 87 00 Meddelelse nummer: 140 Side: 1 av 46 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Forslag til normer på høring - europeiske (CLC) CLC/FprTR 50173-99-2:2009 Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4 Språk: en Utarbeidet av: CLC/TC215 Voteringsfrist: 2009-12-11 CLC/FprTR 50542:2009 Railway applications - Communication means between safety equipment and man-machine interfaces (MMI) Språk: en Utarbeidet av: CLC/TC9X Voteringsfrist: 2009-11-27 CLC/FprTS 50539-12:2009 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. -- Part 12: Selection and application principles - SPDs connected to photovoltaic installations Språk: en Utarbeidet av: CLC/TC37A Voteringsfrist: 2009-10-09 CLC/FprTS 50539-22:2009 Low-voltage surge protective devices - Surge protective devices for specific application including d.c. -- Part 22: Selection and application principles - Wind turbine applications Språk: en Utarbeidet av: CLC/TC37A Voteringsfrist: 2009-10-09 CLC/FprTS 50544:2009 Low voltage d.c. surge protective device for traction systems - Selection and application rules for surge arresters Språk: en Utarbeidet av: CLC/TC37A Voteringsfrist: 2009-12-04 EN 55014-1:2006/FprA2:2009 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus -- Part 1: Emission Språk: en Utarbeidet av: CLC/TC210 Voteringsfrist: 2010-01-01 EN 60071-1:2006/FprA1:2009 Insulation co-ordination -- Part 1: Definitions, principles and rules Språk: en Utarbeidet av: CLC/SR28 Voteringsfrist: 2009-10-23 EN 60335-2-29:2004/FprA2:2009 Household and similar electrical appliances - Safety -- Part 2-29: Particular requirements for battery chargers Språk: en Utarbeidet av: CLC/TC61 Voteringsfrist: 2009-11-13 EN 60335-2-35:2002/FprA2:2009 Household and similar electrical appliances - Safety -- Part 2-35: Particular requirements for instantaneous water heaters Språk: en Utarbeidet av: CLC/TC61 Voteringsfrist: 2009-11-13 EN 60512-26-100:2008/FprA1:2009 Connectors for electronic equipment - Tests and measurements -- Part 26-100: Measurement setup, test and reference arrangements and measurements for connectors according to IEC 60603-7 - Tests 26a to 26g Språk: en Utarbeidet av: CLC/SR48B Voteringsfrist: 2010-01-29 Meddelelse nummer: 140 Side: 2 av 46 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Forslag til normer på høring - europeiske (CLC) EN 60749-19:2003/FprA1:2009 Semiconductor devices - Mechanical and climatic test methods -- Part 19: Die shear strength Språk: en Utarbeidet av: CLC/SR47 Voteringsfrist: 2010-01-01 EN 60749-23:2004/FprA1:2009 Semiconductor devices - Mechanical and climatic test methods -- Part 23: High temperature operating life Språk: en Utarbeidet av: CLC/SR47 Voteringsfrist: 2010-01-01 EN 60749-30:2005/FprA1:2009 Semiconductor devices - Mechanical and climatic test methods -- Part 30: Preconditioning of non-hermetic surface mount devices prior to reliability testing Språk: en Utarbeidet av: CLC/SR47 Voteringsfrist: 2010-01-01 EN 60749-32:2003/FprA1:2009 Semiconductor devices - Mechanical and climatic test methods -- Part 32: Flammability of plastic-encapsulated devices (externally induced) Språk: en Utarbeidet av: CLC/SR47 Voteringsfrist: 2010-01-01 EN 60901:1996/FprA5:2009 Single-capped fluorescent lamps - Performance specifications Språk: en Utarbeidet av: CLC/SR34A Voteringsfrist: 2010-01-01 EN 60947-1:2007/FprA1:2009 Low-voltage switchgear and controlgear -- Part 1: General rules Språk: en Utarbeidet av: CLC/TC17B Voteringsfrist: 2010-01-01 EN 60950-1:2006/FprA1:2009 Information technology equipment - Safety -- Part 1: General requirements Språk: en Utarbeidet av: CLC/TC108X Voteringsfrist: 2009-10-16 EN 61000-6-3:2007/FprA1:2009 Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for residential, commercial and light- industrial environments Språk: en Utarbeidet av: CLC/TC210 Voteringsfrist: 2009-12-11 EN 61000-6-4:2007/FprA1:2009 Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard for industrial environments Språk: en Utarbeidet av: CLC/TC210 Voteringsfrist: 2009-12-11 FprEN 31010:2009 Risk management - Risk assessment techniques Språk: en Utarbeidet av: CLC/SR56 Voteringsfrist: 2009-10-02 Meddelelse nummer: 140 Side: 3 av 46 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Forslag til normer på høring - europeiske (CLC) FprEN 50104:2009 Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods Språk: en Utarbeidet av: CLC/SC31-9 Voteringsfrist: 2010-01-01 FprEN 50540:2009 Aluminium Conductors Steel Supported (ACSS) for overhead lines Språk: en Utarbeidet av: CLC/BTTF132-1 Voteringsfrist: 2010-01-08 FprEN 55016-1-1:2009 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus Språk: en Utarbeidet av: CLC/TC210 Voteringsfrist: 2009-11-13 FprEN 60034-22:2009 Rotating electrical machines -- Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets Språk: en Utarbeidet av: CLC/TC2 Voteringsfrist: 2009-09-11 FprEN 60076-16:2009 Power transformers -- Part 16: Transformers for wind turbines application Språk: en Utarbeidet av: CLC/TC14 Voteringsfrist: 2010-01-01 FprEN 60079-29-4:2009 Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases Språk: en Utarbeidet av: CLC/SC31-9 Voteringsfrist: 2009-10-02 FprEN 60079-29-4:2009/FprAA:2009 Explosive atmospheres -- Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases Språk: en Utarbeidet av: CLC/SC31-9 Voteringsfrist: 2009-10-02 FprEN 60086-1:2009 Primary batteries -- Part 1: General Språk: en Utarbeidet av: CLC/SR35 Voteringsfrist: 2010-02-12 FprEN 60086-2:2009 Primary batteries -- Part 2: Physical and electrical specifications Språk: en Utarbeidet av: CLC/SR35 Voteringsfrist: 2010-02-12 FprEN 60086-3:2009 Primary batteries -- Part 3: Watch batteries Språk: en Utarbeidet av: CLC/SR35 Voteringsfrist: 2010-02-12 FprEN 60086-5:2009 Primary batteries -- Part 5: Safety of batteries with aqueous electrolyte Språk: en Utarbeidet av: CLC/SR35 Voteringsfrist: 2010-02-12 Meddelelse nummer: 140 Side: 4 av 46 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Forslag til normer på høring - europeiske (CLC) FprEN 60143-4:2009 Series capacitors for power systems -- Part 4: Thyristor controlled series capacitors Språk: en Utarbeidet av: CLC/SR33 Voteringsfrist: 2009-12-11 FprEN 60191-6-17:2009 Mechanical standardization of semiconductor devices -- Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-Pitch Ball Grid Array and Fine-Pitch Land Grid Array (P-PFBGA and P-PFLGA) Språk: en Utarbeidet av: CLC/SR47D Voteringsfrist: 2010-01-22 FprEN 60204-33:2009 Safety of machinery - Electrical equipment of machines -- Part 33: Requirements for semiconductor fabrication equipment Språk: en Utarbeidet av: CLC/TC44X Voteringsfrist: 2009-10-16 FprEN 60252-2:2009 AC motor capacitors -- Part 2: Motor start capacitors Språk: en Utarbeidet av: CLC/SR33 Voteringsfrist: 2009-12-11 FprEN 60282-1:2009 High-voltage fuses -- Part 1: Current-limiting fuses Språk: en Utarbeidet av: CLC/SR32A Voteringsfrist: 2009-09-11 FprEN 60300-3-12:2009 Dependability management -- Part 3-12: Application guide - Integrated logistic support Språk: en Utarbeidet av: CLC/SR56 Voteringsfrist: 2010-02-12 FprEN 60335-2-2:2009 Household and similar electrical appliances - Safety -- Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances Språk: en Utarbeidet av: CLC/TC61 Voteringsfrist: 2009-10-02 FprEN 60335-2-13:2009 Household and similar electrical appliances - Safety -- Part 2-13: Particular requirements for deep fat fryers, frying pans and similar appliances Språk: en Utarbeidet av: CLC/TC61 Voteringsfrist: 2009-10-02 FprEN 60335-2-30:2009 Household and similar electrical appliances - Safety -- Part 2-30: Particular requirements for room heaters Språk: en Utarbeidet av: CLC/TC61 Voteringsfrist: 2009-11-06 FprEN 60352-8:2009 Solderless connections -- Part 8: Compression mount connections - General requirements, test methods and practical guidance Språk: en Utarbeidet av: CLC/SR48B Voteringsfrist: 2010-01-22 Meddelelse nummer: 140 Side: 5 av 46 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Forslag til normer på høring - europeiske (CLC) FprEN 60601-2-24:2009 Medical electrical equipment -- Part 2-24: Particular requirements for basic safety and essential performance of infusion pumps and controllers Språk: en Utarbeidet av: CLC/TC62 Voteringsfrist: 2009-12-11 FprEN 60601-2-52:2009 Medical electrical equipment -- Part 2-52: Particular requirements for basic safety and essential performance of medical beds Språk: en Utarbeidet av: CLC/TC62 Voteringsfrist: 2009-10-09 FprEN 60695-1-10:2009 Fire hazard testing -- Part 1-10: Guidance for assessing
Recommended publications
  • Standards Published in 2010
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. ENV 13710:2000 Date published 8 AUGUST 2010 European Ordering Rules - Ordering of characters from the Latin, Greek and Cyrillic scripts 2. I.S. ENV 13801:2000 Date published 8 AUGUST 2010 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation 3. I.S. CEN TS 13853:2004 Date published 13 FEBRUARY 2010 Swap bodies for combined transport – Stackable swap bodies type C 745-S16 – Dimensions, design requirements and testing 4. I.S. EN 61360-4:2005 Date published 7 JANUARY 2010 Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection of standard data element types and component classes (IEC 61360-4:2005 (EQV)) 5. I.S. EN 1990:2002/A1:2006 Date published 29 MARCH 2010 Eurocode - Basis of structural design 6. I.S. EN 1991-4:2006 Date published 31 MARCH 2010 Eurocode 1 - Actions on structures - Part 4: Silos and tanks 7. I.S. EN 60512-13-5:2006/AC:2006 Date published 12 JANUARY 2010 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC 60512-13 -5:2006 (EQV)) 8. I.S. EN 60034-9:2005/A1:2007 Date published 7 JANUARY 2010 Rotating electrical machines -- Part 9: Noise limits (IEC 60034-9:2003/A1:2007 (EQV)) 9. I.S. EN 548:2004/AC:2007 Date published 8 AUGUST 2010 Resilient floor coverings - Specification for plain and decorative linoleum 10.
    [Show full text]
  • OPC Unified Architecture Interoperability for Industrie 4.0 and the Internet of Things
    1 OPC Unified Architecture Interoperability for Industrie 4.0 and the Internet of Things IoT Industrie 4.0 M2M 2 Welcome to the OPC Foundation! As the international standard for vertical and horizontal communication, OPC-UA provides semantic interoper- ability for the smart world of connect- ed systems. Thomas J. Burke President und Executive Director OPC Foundation OPC Unified Architecture (OPC-UA) is the data ex- OPC-UA is an IEC standard and therefore ideally change standard for safe, reliable, manufacturer- suited for cooperation with other organizations. and platform-independent industrial communication. As a global non-profit organization, the OPC Foun- It enables data exchange between products from dation coordinates the further development of the different manufacturers and across operating sys- OPC standard in collaboration with users, manufac- tems. The OPC-UA standard is based on specifica- turers and researchers. Activities include: tions that were developed in close cooperation be- tween manufacturers, users, research institutes and ➞ Development and maintenance of specifications consortia, in order to enable safe information ex- ➞ Certification and compliance tests of change in heterogeneous systems. implementations ➞ Cooperation with other standards organizations OPC has been very popular in the industry and also becoming more popular in other markets like the This brochure provides an overview of IoT, M2M Internet of Things (IoT). With the introduction of Ser- (Machine to Machine) and Industrie 4.0 requirements vice-Oriented-Architecture (SOA) in industrial auto- and illustrates solutions, technical details and imple- mation systems in 2007, OPC-UA started to offer a mentations based on OPC-UA. scalable, platform-independent solution which com- The broad approval among representatives from re- bines the benefits of web services and integrated search, industry and associations indicates OPC-UA security with a consistent data model.
    [Show full text]
  • Relationships Between I4.0 Components
    WORKING PAPER Relationships between In Cooperation with I4.0 Components – Composite Components and Smart Production Continuation of the Development of the Reference Model for the I4.0 SG Models and Standards Imprint Publisher The Federal Ministry for Economic Affairs and Federal Ministry for Economic Affairs Energy was awarded the audit berufundfamilie® and Energy (BMWi) for its family-friendly staff policy. The certificate Public Relations is granted by berufundfamilie gGmbH, an initia- 10119 Berlin tive of the Hertie Foundation. www.bmwi.de Text and editing Plattform Industrie 4.0 Bertolt-Brecht-Platz 3 10117 Berlin Design and production PRpetuum GmbH, Munich Status June 2017 Illustrations This publication as well as further publications Fotohansel – Fotolia (Title) can be obtained from: Federal Ministry for Economic Affairs and Energy (BMWi) This brochure is published as part of the public relations work Public Relations of the Federal Ministry for Economic Affairs and Energy. It E-mail: [email protected] is distributed free of charge and is not intended for sale. The www.bmwi.de distribution of this brochure at campaign events or at informa- tion stands run by political parties is prohibited, and political Central procurement service: party-related information or advertising shall not be inserted Tel.: +49 30 182722721 in, printed on, or affixed to this publication. Fax: +49 30 18102722721 2 Contents 1 Preliminary remarks .......................................................................................................................................................................................................................
    [Show full text]
  • Final Report Standards for Smart Grids
    Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Status: approved by the CEN/CENELEC/ETSI Joint Presidents Group (JPG) on 4 May 2011, subject to the formal approval by 2011-06-05 by the individual ESOs Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Foreword < to be added> Final report of the CEN/CENELEC/ETSI Joint Working Group on Standards for Smart Grids Contents 1. Executive summary .................................................................................................................................. 6 2. Introduction ............................................................................................................................................... 8 2.1 Basic idea of smart grids ..................................................................................................................... 9 2.2 Current political background in Europe ............................................................................................. 11 2.3 Aim of a European standardization report ........................................................................................ 11 2.4 Standardization activities around the world ...................................................................................... 13 3. Description of the overall concept ....................................................................................................... 17 3.1
    [Show full text]
  • Usage of Standards in the Smart Factory Web Testbed
    Usage of Standards in the Smart Factory Web Testbed An Industrial Internet Consortium White Paper Version 1.0 2020-06-29 Usage of Standards in the Smart Factory Web Testbed CONTENT 1 Standards Overview ............................................................................................................... 6 2 Smart Factory Web Architecture ........................................................................................... 8 2.1 Asset Definition ....................................................................................................................... 9 2.2 Describing a Factory in AML................................................................................................... 12 2.3 The Asset Graph View ............................................................................................................ 18 2.4 Factory Registration ............................................................................................................... 19 2.5 Cloud Integration ................................................................................................................... 19 2.6 Implementation Status .......................................................................................................... 32 3 Detailed Description of Standards Usage............................................................................. 34 3.1 AutomationML ...................................................................................................................... 35 3.2 AML and OPC UA ..................................................................................................................
    [Show full text]
  • Tartalom Contents
    TARTALOM SZABVÁNYOSÍTÁSI KÖZLEMÉNYEK Nemzeti szabványok közzététele . 1 Standards Journal Nemzeti szabvány visszavonása . 7 Nemzeti szabványok helyesbítése . 7 Hirdetmény jóváhagyó közleménnyel bevezetett szabványok magyar nyelv´´u változatának megjelenésér´´ol . 10 Egyéb szabványosítási közlemények . 12 Új európai szabványkiadványok . 13 58. évfolyam, 2. szám TANÚSÍTÁSI KÖZLEMÉNYEK 2006. február Min´´oségirányítási rendszer tanúsítása . 36 Környezetközpontú irányítási rendszer tanúsítása . 39 Tanúsítási okirat visszavonása . 39 Tanúsítási okiratok módosítása . 39 Szerkeszt´´oség: Tanúsítási okiratok érvényességi idejének lejárta . 40 Budapest IX., Üll´´oi út 25. 1091 EGYÉB KÖZLEMÉNYEK Telefon: 456-6806 Tájékoztató adatok az MSZT tevékenységér´´ol . 45 Telefax: 456-6809; 456-6823 Közlemény . 46 Szabványügyi tanácsi határozat . 46 Levélcím: Budapest 9. Pf. 24 1450 Nemzetközi környezetvédelmi gyermekrajz verseny . 47 MSZT-honlap: http://www.mszt.hu Az új megközelítés´´u irányelvekhez (direktívákhoz) harmonizált érvényes európai szabványok száma és magyar bevezetésük helyzete 2006. január 1-jéig . 48 Az új megközelítés´´u irányelvekhez (direktívákhoz) hasonló irányelvekhez A szerkeszt´´obizottság elnöke: harmonizált érvényes európai szabványok száma és magyar bevezetésük SIMON PÉTER helyzete 2006. január 1-jéig . 49 NEMZETKÖZI SZABVÁNYKIADVÁNYOK A szerkeszt´´obizottság titkára: IEC-szabványkiadványok . 50 EURÓPAI SZABVÁNYOSÍTÁSI ÉS TANÚSÍTÁSI HÍREK, PONGRÁCZ HENRIETTE INFORMÁCIÓK B´´ovült a munkavédelmi tárgyú, magyar nyelven bevezetett,
    [Show full text]
  • Adobe Reader
    Turinys AKTUALIJOS ................................................................................................. 5 LIETUVOS STANDARTIZACIJOS DEPARTAMENTO TECHNIKOS KOMITETØ PIRMININKØ SUSITIKIMAS ......................................... 5 TARPTAUTINIS SEMINARAS „ISO 50001 – ENERGIJOS VADYBOS SISTEMOS“ VILNIUJE ....................................................................................... 7 STANDARTIZACIJA ...................................................................................... 8 ATNAUJINTA LIETUVOS STANDARTØ PROGRAMA (PARENGTA 2013 M. SAUSÁ) ............................................................................. 8 INFORMACIJA APIE VIEÐAJAI APKLAUSAI TEIKIAMUS EUROPOS IR LIETUVOS STANDARTØ BEI KITØ LEIDINIØ PROJEKTUS ............................... 8 IÐLEISTI LIETUVOS STANDARTAI IR KITI LEIDINIAI .......................................... 9 NETEKÆ GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI ........................... 17 NETEKSIANTYS GALIOS LIETUVOS STANDARTAI IR KITI LEIDINIAI ............... 21 TARPTAUTINIØ IR EUROPOS ÁSTAIGØ BEI ORGANIZACIJØ STANDARTAI IR KITI LEIDINIAI, KURIUOS DEPARTAMENTAS GAVO SAUSIO MËNESÁ ....... 22 TARPTAUTINËS STANDARTIZACIJOS ORGANIZACIJOS STANDARTAI IR KITI LEIDINIAI ................ 22 TARPTAUTINËS ELEKTROTECHNIKOS KOMISIJOS STANDARTAI IR KITI LEIDINIAI .................... 23 RATIFIKUOTI EUROPOS STANDARTIZACIJOS KOMITETO STANDARTAI IR KITI LEIDINIAI ............. 24 RATIFIKUOTI EUROPOS ELEKTROTECHNIKOS STANDARTIZACIJOS KOMITETO STANDARTAI ....... 27 RATIFIKUOTI EUROPOS
    [Show full text]
  • Návrhy Noriem IEC 2014-05
    NÁVRHY NORIEM IEC PREDLOŽENÝCH NA VEREJNÉ PREROKOVANIE za obdobie od 1. mája 2014 do 31. mája 2014 Documents Title Closing Date 3/1179/CDV Industrial systems, installations and equipment and industrial products, designation of signals - Part 1: Basic rules 2014-08-15 3D/227/CD IEC 61360-1/Ed4: STANDARD DATA ELEMENTS TYPES WITH ASSOCIATED CLASSIFICATION SCHEME FOR 2014-08-15 ELECTRIC ITEMS - Part 1: Definitions - Principles and methods 9/1933/FDIS IEC 61375-2-5 Ed.1: Electronic railway equipment - Train communication network - Part 2-5: ETB - Ethernet Train Backbone 2014-07-11 9/1938/CD IEC 62912 Ed.1: Railway applications - Direct current signalling monostable relays of type N and type C 2014-08-15 9/1940/CD IEC 62917 Ed.1: Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires 2014-08-15 13/1581/CD IEC 62056-7-5/Ed.1: ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - Part 7-5: Communication 2014-09-05 profiles for local data transmission 13/1582/CD IEC/TS 62056-9-1/Ed.1: ELECTRICITY METERING DATA EXCHANGE - Part 9-1: Communication Profile using web-services 2014-09-05 to access a DLMS/COSEM Server via a COSEM Access Service (CAS) 14/787/CD IEC 60076-57-1202 Ed.1: Power transformers - Liquid immersed phase-shifting transformers 2014-09-05 17A/1065/CD IEC 62271-1 Ed.2: High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current 2014-09-05 switchgear and controlgear 17C/605/CD IEC 62271-212 Ed.1: High-voltage switchgear and controlgear
    [Show full text]
  • White Paper Automationml and Ecl@Ss Integration
    ® classification and product description White paper AutomationML and eCl@ss integration State: November 2015 AutomationML and eCl@ss integration Common Working Group of AutomationML e.V and eCl@ss e.V. Contributer: Olaf Gräser PHOENIX CONTACT GmbH & Co. KG Lorenz Hundt inpro Innovationsgesellschaft für fortgeschrittene Produktionssysteme in der Fahrzeugindustrie mbH Michael John Siemens AG Gerald Lobermeier Weidmüller Interface GmbH & Co. KG Arndt Lüder Otto-von-Guericke-Universität Magdeburg Stefan Mülhens AmpereSoft GmbH Nicolaus Ondracek Paradine GmbH Mario Thron Institut für Automation und Kommunikation e.V. Josef Schmelter PHOENIX CONTACT GmbH & Co. KG Version 1.0, October 2015 Contact: www.automationml.org www.eclass.de 2 AutomationML and eCl@ss integration Table of content Table of content .................................................................................................................................... 3 List of figures ........................................................................................................................................ 5 List of tables ......................................................................................................................................... 7 1 Introduction and Scope ............................................................................................................. 8 2 Terms, definitions and abbreviations .................................................................................... 10 2.1 Terms and definitions ............................................................................................................
    [Show full text]
  • STANDARDS LIST Neu.Xlsx
    Document‐Number Published Title Organization Committee Committee Title IEC 100/2536/CD * IEC 63002 2015‐07 IEC 63002, Ed. 1.0: Idenficaon and CommunicaonInteroperability Method for External Power Supplies Used WithPortable Compung Devices (TA 14) IEC IEC/TC 100 Audio, video and multimedia systems and equipment IEC 115/105/CD *IEC/TR 62978 2015‐01 IEC/TR 62978, Ed. 1: Guidelines on Asset Management forHVDC Installaons IEC IEC/TC 115 High Voltage Direct Current (HVDC) transmission for DC voltages above 100 kV IEC 118/29/DPAS* IEC/PAS 62746‐199 2013‐09 System interfaces and communication protocol profiles relevant for systems connected to the smart grid ‐ Open Automated Demand Response (OpenADR 2.0 Profile Specification) IEC IEC/PC 118 Smart grid user interface IEC 118/46/CD *IEC 62746‐10‐2 2014‐12 OASIS Energy Interoperation Version 1.0 Specification IEC IEC/PC 118 Smart grid user interface IEC 118/47/CD * IEC 62746‐10‐1 2015‐01 IEC 62746‐10‐1: Systems interface between customer energymanagement system and the power management system ‐ Part10 ‐1: Open Automated Demand Response (OpenADR 2.0bPro file Specificaon) IEC IEC/PC 118 Smart grid user interface IEC 22H/192/CD * IEC/TS 62040‐4‐1 2015‐04 IEC/TS 62040‐4‐1: Uninterrupble power systems (UPS) ‐ Part 4‐1: Environmental aspects ‐ Product Category Rules (PCR) for life Cycle Assessment and environmental declaraons IEC IEC/SC 22H Uninterruptible power systems (UPS) IEC 3/1224A/CD * IEC 81346‐2 2015‐05 Industrial systems, installaons and equipment and industrialproducts ‐ Structuring principles and reference designaons ‐ Part 2: Classificaon of objects and codes for classes IEC IEC/TC 3 Information structures and elements, identification and marking principles, documentation and graphical symbols IEC 3D/225A/CD * IEC 62656‐5 2014‐03 IEC 62656‐5, Ed.
    [Show full text]
  • Canadian Data Governance Standardization Roadmap B
    Canadian Data Governance Standardization Roadmap b Canadian Data Governance Standardization Roadmap Table of contents Acknowledgements ................................................................................................................. 2 Message from the Co-Chairs of the Data Governance Standardization Collaborative .............................................................................................. 3 Message from the CEO, Standards Council of Canada .................................................. 4 Executive Summary ................................................................................................................ 5 How to Use this Report ............................................................................................................7 About Standards and Conformity Assessment ..................................................................................7 About the Collaborative ................................................................................................................................... 8 Reading the Roadmap ..................................................................................................................................... 8 Standardization and Data Governance in Canada ..........................................................10 State of Play ........................................................................................................................................................10 Tackling the Challenges and Identifying the Opportunities
    [Show full text]
  • Progress File (Standards Publications)
    IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS 1. I.S. EN 2336:1988/AC1:1988 Date published 1 JANUARY 2006 Aerospace Series - Bearings, Spherical Plain in Steel with Assembly Slots - Dimensions and Loads 2. I.S. EN 28378-1:1989/AC1:1989 Date published 1 JANUARY 2006 Information Processing - Data Interchange on 130 mm (5.25") Flexible Disk Cartridges Using Modified Frequency Modulation Recording at 7958 ftprad, 3.8 tpmm (96 tpi), on Both Sides - Part 1: Dimensional, Physical and Magnetic Characteristics. (ISO 8378-1, 1st Edition, 3. I.S. HD 1215-2:1988/AC1:1989 Date published 1 JANUARY 2006 Thermostatic Radiator Valves - Part 2 : Dimensions and Details on Connection 4. I.S. EN 50203:1996/A1:1999 Date published 2 FEBRUARY 2006 Automatic channel installation (ACI) 5. I.S. EN 54-2:1999 Date published 1 JANUARY 2006 Fire detection and fire alarm systems - Part 2: Control and indicating equipment 6. I.S. EN 12737:2004 Date published 28 JULY 2006 Precast concrete products - Floor slats for livestock 7. I.S. EN 61009-1:1994/A13:2004 Date published 2 FEBRUARY 2006 Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) -- Part 1: General rules 8. I.S. EN 50091-1-1:2004 Date published 2 FEBRUARY 2006 Uninterruptible power systems (UPS) -- Part 1-1: General and safety requirements for UPS used in operator access areas 9. I.S. EN 60432-1:2004 Date published 2 FEBRUARY 2006 Incandescent lamps - Safety specifications -- Part 1: Tungsten filament lamps for domestic and similar general lighting purposes (IEC 60432-1:1999 (MOD)) 10.
    [Show full text]