DOCSLIB.ORG

Sisu Engine Range

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Sisu Engine Range JULY PRODUCT NEWS REPLACEMENT PARTS SUITABLE FOR MASSEY FERGUSON TRACTORS NEW 64494 Fuel Filter Assembly 5445 5455 5460 6445 Tier 3 Low Pressure Fuel System OE Ref: 4288692M2 NEW 64402 Head Light 6235 6235HV 6245 6245HV 6255 6255HV 6260 6265 6270 6280 6290 OE Ref: 3809346M91 NEW 22335 Engine Block 248 Short Motor Lip Seal OE Ref: 3641515M91 Suits 4 or 6 Stud Balancer NEW 64501 Front Axle Seal - Diferential Coupling 54s 62s 64s 74s 82s Also Deutz Agrotron Landini Legend SEE INSIDE Landpower Valmet OE Ref: 3665412M1 FOR COMPLETE NEW QTP ENGINE 64429 Inner Diameter 1 - 35 mm Ball Joint 6235 - 6290 Outer diameter 1 - 92 mm Outer diameter 2 - 98 mm LISTING Height 1 - 13 mm Height 2 - 27 mm SISU ENGINE RANGE OE Ref QTP Ref Descripion Cyl Liter Tier HP SISU Combine Engine Fendt 9280 500 HP/ 365 V835461892 835461892 7 9.8 CTA 4V 3 / 9470X KW 2100 RPM SISU Combine Engine MF 7280 V835276524 / 370 HP / 276 835276524 7282 Centora, Fendt 8370P 8400, 6 8.4 AWI 3 6247184M91 KW 2100 RPM Challenger 654B 658B V835076967 / SISU Combine Engine MF 7347S, 276 HP / 203 V865076967 / 835076967 Laverda M310 MCS, Challenger 6 7.4 AWI 2 KW 7107349M91 647C Combine V835076137 / SISU Tractor Engine MF 6499 / 215HP / 160 835076025 6 7.4 CTA 4V 3 4280292M92 Chalenger MT595B KW V862860572 / SISU Combine Engine MF 72's 230 HP 200 862860572 6 7.4 1 V832857777 7254 7256 634DSBIEL RPM V862957528 / 862957528 SISU Combine Engine 645 DSBIEL 6 8.4 3 300HP V832957528 V862860571 / SISU Combine Engine MF 72's 200HP 200 862860571 6 7.4 1 V832857776 7254 7256 634DSBIEL RPM SISU Combine SHORT BLOCK V865276179X 865276179 Fendt 8300 8350 8370 8400P MF 6 8.4 CTA 4 V 3 7274 7278 7280 7282 V865076118 / SISU Tractor Engine MF 235HP / 865076118 6 7.4L CTA 3 4287952M92 8450,8460 175KW SISU Tractor Engine Valmet 8550 V862860104 862860104 6 7.4 DSR 160HP 634DSR V862760475 / SISU Tractor Engine Valmet 8150 862760475 6 6.6 DSRE 125HP V832760475 620DSRE V862961326 / SISU Combine Engine MF7270 305HP / 227 862961326 6 8.4 ETA 3 V862961326X Fendt 6300C KW SISU Tractor Engine MF 480 Xtra 130HP / 6239267M91 6239267 4 4.4 2 420DS 96.9KW V865276181T / SISU Combine LONG ENGINE MF 865276181 6 8.4 CTA 4V 3 V865261643T 7270, Laverda M306 Fendt 6300C V864376686X / Engine SHORT BLOCK SISU 44 864376686 4 4.4 CWA 2V 3 84-117 KW 864376161 CWA-2V 2 Original equipment manufactures names and part numbers are quoted for reference purposes only and are not intended to infer that our replacement parts are used as original equipment PERKINS ENGINES OE Ref QTP Ref Descripion Cyl Liter HP Perkins Type AD3.152 Turbo CE31215 1000T 3 2.5L 60HP / 45KW Complete Perkins Type AD3.152 CE31215 1000P 3 2.5L 50HP / 37KW Complete Perkins Type AD3.152 CE31215 1000S 3 2.5L 50HP / 37KW Stripped Perkins Type Short Motor 80HP / LF39335 22335 4 4.1L 248 Lip seal 59.7KW Perkins Type Short Motor 69HP / LD39334 64482 4 3.9L 236 Lip seal 51.5KW FORD ENGINES QTP OE Ref Cyl Liter HP Ref Descripion 87800478 / Ford Engine 4630 4130 3930 43600 3 3.3L 60HP / 44KW 87800409 Turbo CAV pump Ford Engine 4610 L865 87801409 43658 3 3.3L 60HP / 44KW LX865 Turbo Bosch Pump Original equipment manufactures names and part numbers are quoted for reference purposes only and are not intended to infer that our replacement parts are used as original equipment 3 REPLACEMENT PARTS SUITABLE FOR NEW HOLLAND & CASE TRACTORS NEW 43620 Exhaust Manifold TMs Case MXMs OE Ref: 87802374 Gaskets - 409734 + 409734R Stud - 41868 52461 Top Link T6010 T6020 T6030 T6040 NEW NEW T6050 Case Maxxum / MXU/Puma OE Ref: 5197609 43639 Exhaust Silencer Case JX60 - 80 New Holland TD60D TD75D TD80D 600mm OE Ref: 5093950 Cat 2 Cat 2 43537 NEW Stabiliser T4000s TNs OE Ref: 5199353 NEW 43640 Exhaust Silencer Case JX70 JX90 380mm New Holland TD70D TD90D OE Ref: 5094825 NEW 43679 Drive Shaft 4WD Hi/Lo or Manual Transmission TM Series Case MXM Ford 60 Series OE Ref: 5168037 12 Splines 14 Splines 7587 - Coupling 12 Spline 7507 - Coupling 14 Spline 1760mm 43094 - Support 6912 - Bearing & Carrier 4 Original equipment manufactures names and part numbers are quoted for reference purposes only and are not intended to infer that our replacement parts are used as original equipment REPLACEMENT PARTS SUITABLE FOR 409746 U Joint VATRACTORS LT R A NEW NEW 64479 43619 Head Lamp Valtra A Series C Front Axle Shaft Ford 5635 Series M Series N Series T Series 6635 7635 8160 8260 40 OE Ref: V34203600 Series 6010 6020 6030 6040 6050 6070 TD80 TD75 TD90 TD95 TL75 TL80 OE Ref: 5191549 NEW 64480 Right Hand Head Lamp Cowl Valtra A/C/M/N/T Series OE Ref: V34594600 64481 Left Hand Head Lamp Cowl OE Ref: V34594500 NEW 43602 Accumulator TM TSA T6s T7s Front Axle Suspension OE Ref: 87354713 NEW 64477 Ring Gear Valtra 6000/8000 Series OE Ref: V835328783 NEW 64478 Ring Gear 4435 4445 4455 Valtra NEW 205 305 355 405 415 455 OE Ref: V836014127 43669 Cab Air Filter T4 T5 Series Case Farmall Series Steyr Kompakt Series OE Ref: 84577445 REPLACEMENT PARTS SUITABLE FOR 7663 Head Lamp Fiat 1000 1300 450 480 500 FIAT TRACTORS 540 550 600 640 650 750 850 900 OE Ref: 09927778 NEW NEW 43568 PTO Guard T5 T6 T7 TM TSA TL TLA OE Ref: 47125899 5 REPLACEMENT PARTS SUITABLE FOR NEW 58796 JOHN DEERE Quick Release Coupler TRACTORS 6030/6R/6M Series TOP OE Ref: AL210588 NEW NEW 4 Cylinder 58795 Quick Release Coupler 58960 6030/6R/6M Series Bracket Stabiliser 6100 6200 6300 6300 6400 6506 6600 6010 6110 6210 BOTTOM 6310 6410 6510 6610 6810 6910 6910S 6020 6120 6220 6320 OE Ref: AL210587 OE Ref: L155798 6 Cylinder Stabiliser - 59650 NEW 58940 Track Rod End 6105R 6115R 6125K 6105M 6115M 6125M 6090RC 6100KC 6110RC 6090MC 6100MC 6110MC OE Ref: AL222371 430mm NEW 58896 Fan Blade 1020 1120 2020 2120 350mm 1030 1035 1130 1630 1635 1830 2030 2035 2130 2135 OE Ref: AT23180 AT26373 NEW 58895 Radiator John Deere 820 920 1020 1030 1130 1530 1630 3030 830 930 2040 2240 OE Ref: AT20849 59163 - Water Pump to suit NEW 58793 Decal Kit 3050 OE Ref: L59278 NEW 58792 Decal Kit 3040 OE Ref: L35211 6 Original equipment manufactures names and part numbers are quoted for reference purposes only and are not intended to infer that our replacement parts are used as original equipment NEW 43683 Air Valve Switch for Height Adjustment In Arm Rest Fits All Seats That Have Height/Weight Adjustment In Arm Rest 53923 59548 Rear Window NEW 6105R - 6195R, 6210R - 6215R DELUXE MECHANICAL SEAT OE Ref: AL212195 NEW 59399 Radiator Drain Plug John Deere 6000 6010 OE Ref: AL110979 NEW 58889 Exhaust 4040 4240 4440 4640 4840 4050 4250 4450 830-207B OE Ref: RE20224 SPECIFICATIONS Fore/at Adjustment 175mm Backrest angle adjustment 35-170° Weight adjustment 50-130kg Suspension stroke 80mm Height adjustment 60mm 7 REPLACEMENT PARTS SUITABLE FOR CASE TRACTORS Includes LuK NEW NEW Bearings 52459 Top Link Case CS100 CS110 CS120 CS130 CS150 CVX1135 1145 1155 1170 1150 1195 CVX120 130 150 170 Ford TCT135 145 155 170 190 195 OE Ref: 132574312 660mm 52499 Clutch Kit Case CX50 CX60 CX70 OE Ref: B512444 Cat 3 Cat 3 NEW Includes LuK Bearings NEW 52460 Stabiliser Case 640 644 740 743 744 745 745S 840 844 844S 845 856 940 946 955 956 1046 1056 OE Ref: 1965995C91 390-640mm 52500 Clutch Kit Case 633 640 733 740 OE Ref: B507055 NEW 52491 Door Hinge Case IH 956XL 1056XL Upper Left Hand OE Ref: 3234093R1 Includes LuK NEW 52492 Bearings Door Hinge Case IH 956XL 1056XL Upper Right Hand OE Ref: 3234094R1 59521 Door Case IH - Left Hand suits XL Cab 956XL, 1056XL OE Ref: 3234023R92 52501 52493 - Lower Left Hand Hinge Clutch Kit Case 833 840 933 940 52494 - Lower Right Hand Hinge OE Ref: B507056 8 REPLACEMENT PARTS SUITABLE FOR NEW 53822 Exhaust Deutz 10006 8006 DEUTZ OE Ref: 02165302 TRACTORS NEW NEW 53823 680091 Exhaust Deutz Agrostar 4.61 4.71 6.11 6.21 Head Lamp Deutz D10006 D12506 D13006 6.31 4.68 4.78 6.08 6.28 6.38 Agro Prima 6.16 D16006 D2506 D3006 D4006 D4056 D5006 Agro Sun 100 120 140 OE Ref: 04385384 D5206 D5506 D6006 D6206 D6806 D7006 D7206 D7506 D7606 OE Ref: 02306919 NEW REPLACEMENT PARTS SUITABLE FOR 53802 Exhaust Deutz DX Series DX4 Series DX6 Series DX8 Series OE Ref: 04388385 FENDT TRACTORS 680099 NEW Exhaust Fendt Farmer 102, 103, 104, 105, 106, 108, 200S, 200SA, 200V, 200VA, 201S, 201SA, 201V, 201VA OE Ref: H145200100040 SAMEREPLACEMENT PARTS SUITABLE FOR TRACTORS NEW 53824 Exhaust SAME Bufalo 130 Laser 100 110 130 NEW 680100 Exhaust Fendt Farmer 2, 3, 4, 5, 102, 103, 104, 105, 106, 108, 200S, 200SA, 200V, 200VA, 201S, 201SA, 201V, 201VA OE Ref: H13506101010 Original equipment manufactures names and part numbers are quoted for reference purposes only and are not intended to infer that our replacement parts are used as original equipment 9 NEW NEW 64444 41773 Weld On Quick Attach Hook CAT 4 Quick Release End CBM CAT 2S OE Ref: 3905500M91 NEW NEW 53836 53839 CAT 2S Quick Attach Hook Kit CBM Type CAT 4 Quick Attach Hook Kit REPLACEMENT PARTS SUITABLE FOR MASSEY FERGUSON TRACTORS 3611706 Steering Column 4291817 340 342 350 352 355 Cab Suspension Conversion Kit 360 362 365 375 390T 390 398 399 6470 6460 6455 6445 OE Ref: 3611706M91 OE Ref: 4291817M13 LIMITED STOCK 10 Original equipment manufactures names and part numbers are quoted for reference purposes only and are not intended to infer that our replacement parts are used as original equipment REPLACEMENT PARTS SUITABLE FOR 43593 Water in Fuel Sensor M10 NEW HOLLAND TS125A TS135A TS113A & CASE OE Ref: 2830419 TRACTORS 41077 Door Glass - 7 Hole TM TS TL RH TS90-TS115 TM115-TM190 TL70-TL100 TL70A - TL100A Case MXM120-MXM190 JXU OE Ref: 82019225 41611 Fuel Filter Ford TSA 110-135 - 2 Filter Model T6000 T7000 T Series Primary Filter OE
Load more

Recommended publications
  • Cnh Global N.V
    SECURITIES AND EXCHANGE COMMISSION Washington, D.C. 20549 FORM 20-F ® © REGISTRATION STATEMENT PURSUANT TO SECTIONS 12(b) OR (g) OF THE SECURITIES EXCHANGE ACT OF 1934 or ®X© ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 For the Fiscal Year Ended December 31, 2001 or ® © TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 Commission File Number 1-14528 CNH GLOBAL N.V. (Exact name of registrant as speciÑed in its charter) Kingdom of The Netherlands (State or other jurisdiction of incorporation or organization) World Trade Center, Amsterdam Airport Tower B, 10th Floor Schiphol Boulevard 217 1118 BH Amsterdam The Netherlands (Address of principal executive oÇces) Securities registered pursuant to Section 12(b) of the Act: Name of Each Exchange Title of Each Class on which Registered Common Shares, par value 40.45 New York Securities registered pursuant to Section 12(g) of the Act: None Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act: None Indicate the number of outstanding shares of each of the issuer's classes of capital or common stock as of the close of the period covered by the annual report: 277,100,298 Common Shares Indicate by check mark whether the registrant has (1) Ñled all reports required to be Ñled by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to Ñle such reports), and (2) been subject to such Ñling requirements for the past 90 days.
    [Show full text]
  • We Know Agriculture Annual Report 2010 2 AGCO // Annual Report 2010
    We Know Agriculture ANNUAL REPORT 2010 2 AGCO // Annual Report 2010 AGCO AT A GLANCE As the world’s largest manufacturer focused purely on agricultural equipment, AGCO is uniquely positioned to increase farm productivity through high-tech solutions for professional farmers feeding the world. KEY BUSINESS FIGURES in million $ – except per share amounts 2010 2009 Change Net sales 6,896.6 6,516.4 5.8% Income from operations 324.2 218.7 48.2% Net income attributable to AGCO Corporation and subsidiaries 220.5 135.7 62.5% Total assets 5,436.9 4,998.9 8.8% Stockholders’ equity 2,659.2 2,394.4 11.1% Earnings per share(1) 2.29 1.44 59.0% Adjusted earnings per share(2) 2.32 1.55 49.7% (1) On a diluted basis. (2) For a reconciliation of adjusted earnings per share, see footnote 2 on page 37. SALES BY PRODUCT in % Tractors 15% Parts Combines 68% 6% Application equipment 4% 4% Implements and other 3% Hay and forage SALES BY GEOGRAPHIC REGION ADJUSTED EARNINGS PER SHARE in million $ in $ (1) NA 22% 2010 2.32 SA(2) 25% 2009 1.55 EAME(3) 49% ROW(4) 4% 2008 3.95 (1) North America (3) Europe, Africa, Middle East (2) South America (4) Rest of World: Asia, Australia/New Zealand, Eastern Europe ON THE COVER In 2010, AGCO made solid progress toward meeting its long-term growth objectives. Among other things, it was a year marked by numerous combine launches and the announcement of a strategic acquisition of a state-of-the-art combine facility, proof of our accelerated commitment towards improving harvesting productivity.
    [Show full text]
  • The New Alliance the Market Likes
    YEAR VIII n° 1 MAY 2008 The harvesting specialist’s journal The new alliance the market likes Excellent feedback from the Laverda-Agco understanding Meanwhile, the combine sector is up and coming in Italy and the “reds” soar to over 36 percent A POSITIVE 2007 FOR FELLA AND COMBINE CONTESTS, THE GERMAN ENERGY THE LAVERDA “FAMILY”: HAYMAKING, AN THE “REDS” MAN MANUFACTURERS SELF-PRODUCTION, THE TURNOVER IDEA THAT DATES WINS IN RUSSIA MEET IN BREGANZE LAVERDA WAS ONE OF TOPS 150 MILLION BACK 90 YEARS THE PIONEERS page 2 page 7 page 11 page 12 pages 14-15 Gruppo Industriale ARGO The situation by Mario Scapin Ready to enter the field Mario Scapin and reap lots more satisfaction director general The Laverda Group’s turnover topped 150 million in 2007, also thanks to a strategic agreement reached with Agco The harvesting specialist’s Dear readers, as we approach the of all the workers, dealers, market- tion of the segment of conven- journal period in which you’ll be making ers and shareholders. I’d like to tional machines, with straw-walk- Year VIII, N° 1, May 008 Quarterly periodical a start on your field work, we can express my sincere gratitude to all, ers. The number of orders received Registered with the Court of Vicenza all look forward with optimism to but I also and above all wish to ex- from the East European countries N° 1017 of 5 March 00 this new harvest because it should tend my thanks to all our custom- is extremely positive, particularly publishing management finally provide all farmers with the ers for their trust in the products those from Bulgaria and Romania.
    [Show full text]
  • Agco Corporation
    UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 8-K Current Report Dated November 3, 2010 of AGCO CORPORATION A Delaware Corporation IRS Employer Identification No. 58-1960019 SEC File Number 1-12930 4205 River Green Parkway Duluth, Georgia 30096 (770) 813-9200 Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions: o Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) o Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) o Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) o Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) Item 1.01. Entry into a Material Definitive Agreement. The Company entered into a purchase agreement dated as of October 29, 2010, with ARGO SpA to acquire the remaining 50% of Laverda SpA. The purchase price is €65 million. The purchase agreement contains customary representations, warranties and closing conditions for this type of transaction. AGCO will own 100% of Laverda SpA, which includes the hay equipment business of Fella-Werke GmbH, once the approvals of relevant local competition authorities have been obtained and closing occurs. The Company expects the purchase to close in December 2010. A press release announcing the purchase agreement is attached hereto as Exhibit 99.1. Item 9.01. Exhibits. The following exhibit is filed with this report: 99.1 Press release dated November 3, 2010.
    [Show full text]
  • Andy Beck Senior Vice President and CFO Agenda
    Andy Beck Senior Vice President and CFO Agenda • Recent transactions • Investing in the business • AGCO Finance performance • 2011 preliminary targets 2 Strong Financial Position – Reinvesting in the Business Reducing Net Debt to Total Capital* • Investments in developing markets • New products • Production / productivity improvements • Tactical acquisitions Note: Net debt to total capital is defined as (total debt less cash) divided by (total debt less cash) + total equity 3 Sparex Acquisition • Late life cycle UK-based parts retailer • 2009 sales of approximately $85M – mostly European – also in Africa, Middle East, Asia and North America • Gives AGCO access to independent service shops • Provides market share opportunity for AGCO dealer parts sales • Strong margin business • £53M purchase price 4 Amity Acquisition • 50% joint venture in U.S. • Expands AGCO’s product offering: air seeders and tillage products • Strong margin business • Primarily in US today, opportunity for international growth 5 Laverda Acquisition • Remaining 50% interest acquired • Additional volume and scale • Shared R&D • Opportunity for integration of purchasing and marketing organizations • New home for European combine production Combines / Balers / Grass and Hay Equipment 6 Agenda • Recent transactions • Investing in the business • AGCO Finance performance • 2010 preliminary targets 7 Growing R&D R&D Spending ($ millions) • Continuing to invest in new products – high horsepower tractors – harvesting products • Tier 4 interim products to be launched in 2011 •
    [Show full text]
  • Cenex Qwiklift HTB Tractor Hydraulic Fluid Is Recommended When the Following Manufacturers, Specifications, Or Performance Levels Are Called For
    Cenex Qwiklift HTB Tractor Hydraulic Fluid is recommended when the following manufacturers, specifications, or performance levels are called for: AGCO/Deutz/Allis/White/Oliver/MM: Power Fluid 821XL, 821, Q-1705, 1722, 1766B, Q-1802, 1826, Ag One Universal, Type 55 AGCO/Massey Ferguson: Permatran III, MF-1141, 1139, 1127A/B, 1129A, 1135, 1143, 1145, 1110 Allison: C-4/C-3 (some agriculture applications only) Caterpillar: MTO Fluid, (TO-2 obsolete) CNH: Case-IH: Akcela Hy-Tran® Ultra (MS 1209, MAT 3505), Akcela Nexplor (MAT 3525), Hy-Tran® Plus (MS-1207); Hy-Tran®, (MS1206, 1205, 1204, B-6) TCH (MS 1210, MAT 3506), JIC 144/145, Powergard PTF Ford/New Holland: Ambra Multi-G 134 Fluid (MAT 3525, NH 410B), Ambra MasterTran (MAT 3505, NH-410C), FNHA-2-C-200/201.00, ESN-M2C134-D, M2C41B, M2C48B/C, M2C53A/B, M2C86B, M2C159B/C Hesston/Fiat: Oliofiat Tutela Multi-F/G, AF-87 John Deere: Hy-Gard, JDM J20C/A, J14C/A, J21A, 303 Type, Komatsu Dresser: B-06-002/1 Kubota: Super UDT, UDT, Transdraulic Fluid Landini: Tractor II Hydraulic Fluid Steiger: Hydraulic/Transmission Fluid 17001 Versatile: HyGear Fluid, 23M, 24M Volvo: VME WB-101, VCE 1273.03 ZF: TE-ML-03E, 05F, 06E, 06K API: GL-4 Pump Performance: Hagglunds/Denison HF-0, Eaton/Vickers (35VQ25, M-2950-S, I-286S), Sundstrand, Sauer Danfoss Other Agriculture Tractor and Transmission Manufactures: Antonio Carraro, Argo, Belarus, Buhler, Clark, Claas, David Brown, Deutz-Fahr, Ebru, Fendt, Fort, Pegoraro, Gleaner Hurlimann , IMT, JCB, Kioto, Komatsu, Lamborghini, Laverda, Leyland, Mahindra, McCormick,
    [Show full text]
  • AGCO Corporation Takes 50% Stake in Italian Harvesting Business
    June 25, 2007 AGCO Corporation Takes 50% Stake in Italian Harvesting Business Harvesting Joint Venture with Laverda S.p.A to Reinforce AGCO's Market Positioning DULUTH, Ga.--(BUSINESS WIRE)--June 25, 2007--AGCO Corporation (NYSE: AG), a worldwide manufacturer and distributor of agricultural equipment, today announced that, subject to the approval of the competition authorities, it has agreed to acquire 50% of Laverda S.p.A from the Italian ARGO group. ARGO owns a number of manufacturing, service and distribution companies as well as some prestigious trademarks, all operating exclusively in the traditional agricultural machinery sector. Based in Breganze, in Northern Italy, Laverda operates one of the most modern and efficient production facilities for harvesters in Europe. In addition to producing Laverda branded combines, the Breganze factory has been manufacturing mid-range combine harvesters for AGCO's Massey Ferguson, Fendt and Challenger brands for distribution in Europe, Africa and the Middle East since 2004. In 2006, Laverda's annual consolidated net sales were approximately EUR 133 million. "This investment reinforces AGCO's market positioning and supports our strategic aim of taking a leading position in the European harvesting business," commented Martin Richenhagen, Chairman, President and CEO of AGCO. The joint venture will further improve AGCO's product offering of harvesting equipment and is expected to provide a foundation for long term product development. "AGCO is committed to growth in the harvesting markets. With the combined sales volumes of the Laverda brand and our AGCO brands, we will be well positioned in the competitive marketplace," said Gary Collar, Senior Vice President and General Manager, Europe, Africa and Middle East (EAME).
    [Show full text]
  • V-Belt Interchange Guide for Farm & Agricultural Machinery
    PRICE LIST 1700 EFFECTIVE March 15th, 2017 ACE IRRIGATION ~ AG CHEM ~ ALLIED ~ ALLIS CHALMERS ~ ALLOWAY ~ ANTHES WEST ~ APPLE QUIST ~ ARBOS ITALY ~ ARTS WAY ~ ATLAS METAL ~ AUBURN ~ AUTOMATIC ~ BADGER NORTHLAND ~ BALZER ~ BARRANTINE ~ BEAR CAT ~ BLACKWELDERS ~ BLAIR MFG ~ BMB MFG ~ BRADY ~ BRANT ~ BRIDGER FARM ~ BRILLION IRON ~ BROWN ~ BURNS BUTLER MFG ~ CALDWELL ~ CALKINS ~ CANADIAN CO-OP ~ CARTER ~ CASE ~ CATERPILLER ~ CCIL ~ CENTRAL TEXAS IRRIGATION ~ CFE ~ CLAAS ~ CLAEYS ~ CLARK EQUIPMENT ~ CLAY EQUIPMENT ~ CLAYSON ~ CLEVELAND FARM ~ COCKSHUTT ~ COLT MFG ~ CONTINENTAL BELTON ~ CROSS EQUIPMENT ~ CUSTOM FARM ~ DAFFIN INC ~ DANUSER ~ DAVID MFG ~ JOHN DEERE ~ DESERT IRRIGATION ~ DEUTZ-ALLIS ~ DISTRIVELEZ ~ DK MFG ~ DRESSLER INDUSTRIES ~ DURA CORP ~ EDWARDS EQUIPMENT~ ELLIOTT MFG ~ ENID FOUNDRY ~ EVERSMAN ~ EXCEL INDUSTRIES ~ FARM FANS ~ FARMHAND ~ FARRAR MACHINE ~ FIAT ALLIS ~ FIELD QUEEN ~ FINN CORP ~ FLEMING MFG. ~ FMC ~ FOOD MACHINE ~ FORD TRACTOR & IMPLEMENT ~ FORMALLOY ~ FOSTER ~ V-BELT INTERCHANGE GUIDE FOR FARM & AGRICULTURAL MACHINERY GRIDER ~ GROVE MFG ~ HABCO ~ HAHN INC ~ HAMACHECK ~ HAMMERSMITH ~ HANSON HARRIS HARVESTOR ~ HART CARTER ~ HEATH ~ HENKE MACHINE ~ HENRY ND ~ HESSTON ~ HEVCO ~ HINIKER ~ HOB TOOL ~ HOBBS ENGINEERING ~ HUTCHINSON DIV HYDRA MAC ~ IMPERIAL STEEL ~ INGALLS MFG ~ INNES ~ INTERNATIONAL HARVESTER ~ JACOBS TOOL ~ JACOBSEN MFG ~ JAMES MFG ~ LEBCO ~ JET FLOW ~ JOHNSON FARM ~ KBH ~ KASTEN MFG ~ KEITH IND ~ KELLEY MFG ~ KELLY RYAN ~ KENT MFG ~ KITSON POULTRY ~ KOEHRING ~ KOSCH ~ KUBOTA ~ KUKER ~ LAIDIG ~ LENNOX
    [Show full text]
  • Economic Report 2017
    ECONOMIC REPORT 2017 CONTENTS ► OVERVIEW OF THE AGRICULTURAL MACHINERY SECTOR 01 P. 6 ► DETAILED RESULTS FOR AGRICULTURAL MACHINERY 02 P. 14 18 20 22 24 26 28 30 32 34 38 40 42 ► AGRICULTURAL MACHINERY OUTLOOK 03 P. 44 ► APPENDICES 04 P. 58 ► INDEX 05 P. 62 ►DID YOU KNOW? AGRICULTURAL THE AGRICULTURAL EVOLUTION MACHINERY SECTOR OF THE FRENCH IN FRANCE IN FRANCE MARKET €4.6 bn €70 bn +5% in 2018 FRENCH PRODUCTION FRENCH PRODUCTION PRODUCTION OUTLOOK OF rd st AGRICULTURAL MACHINERY (€4.9 Bn) 3 PRODUCER 1 COUNTRY IN EUROPE IN EUROPE BEHIND IN PRODUCTION OF EVOLUTION OF FRENCH GERMANY AND ITALY LIVESTOCK AND CROPS FARMS BETWEEN 1990 AND 2015: 4% OF THE FRANCE: 17% TURN- GLOBAL PRODUCTION OF THE AGRICULTURAL PRODUCTION OVER X 2.3 SUB- IN EUROPE SIDIES 31% OF THE X 9 FRENCH PRODUCTION LIVESTOCK PRODUCTION (2017): IS TRACTORS €9.3 bn COSTS X 2 OF MILK PRODUCTION €5.1 bn €1.2 bn COSTS IN FUEL FRENCH MARKET OF EGG PRODUCTION €11.9 bn & LUBRICANTS: X 3 €3.5 bn OF BEEF PRODUCTION COST OF FEED FOR CATTLE: X 2.5 OF IMPORTS THE SURFACE AREA OF CEREALS (2016): 33% OF FRENCH COSTS IN WORK BY €3.3 bn AGRICULTURAL LAND THIRD-PARTIES: X 2.2 OF EXPORTS €9.7 bn PRICE OF EQUIPMENT: X 1.5 Exports €-252 m Imports (-718 in 2016) CEREAL PRODUCTION CHANGE IN FRENCH TRADE BALANCE 296,800 FARMS FOR AGRICULTURE IN FRANCE YIELDS JOBS & COMPANIES 2 TIMES LESS THAN IN 1990 1 FARM / 2 WITH LIVESTOCK 385 COMPANIES +43% +36% +18% 17,000 JOBS OF THE INVESTMENTS IN 2015: DEALERS 5.3% 3,548 COMPANIES No.
    [Show full text]
  • Deutz Allis Drive and Adaptor Plate Parts Manual
    MAN-03177 STRIPPER HEADER DEUTZ ALLIS DRIVE AND ADAPTOR PLATE PARTS MANUAL Shelbourne Reynolds Engineering Ltd Stanton Bury St Edmunds Suffolk IP31 2AR England Telephone: 01359 250415 Stores Direct : 01359 251231 Fax: 01359 250464 Stores Direct: 01359 252031 Shelbourne Reynolds Inc. Colby PO box 607 1250 S Country Club Drive Colby , Kansas 67701 U.S.A. Telephone: (785) 462 6299 Fax: (785) 462 6761 Issue 9 23/08/2019 www.shelbourne.com STRIPPER HEADER ORDERING SPARE PARTS IMPORTANT Your Stripper Header is a made up of a Machine assembly number (common parts), specific sub assemblies and also customer optional build kits. The machine, sub assemblies and optional kit numbers are listed in the front pages of your Operators manual. If you do not have these numbers please contact Shelbourne Reynolds Parts Department direct on (telephone) Stanton - (01359) 251231 or Colby - (785) 462 6299. To ensure that you order the correct part from your SRE dealer please use the following procedure. ALWAYS QUOTE THE MACHINE AND SERIAL NUMBERS WHEN ORDERING. The year and/or serial number of the machine may determine the correct sub assembly. Refer to the Parts Manuals front page/s, listing the machine assemblies. Select the correct machine assembly number which is printed in the top left corner of the page (starting with 1965_ _ 01), This machine number can also be taken from the Stripper Header identification plate located on the rear left hand corner of the machine. On this page you will find the parts listing for the common parts for every configuration of that machine assembly number.You will find the corresponding drawing by either looking at the facing page or progressing through the manual to the next drawing.
    [Show full text]
  • Driving CNH GLOBAL >> > 2001 ANNUAL REPORT CONTENTS Company Overview Pg 02
    driving CNH GLOBAL >> > 2001 ANNUAL REPORT CONTENTS Company Overview pg 02... Agricultural Equipment pg 08... Construction Equipment pg 16... Brands pg 20... Letter to Shareholders pg 22... Financials pg 26... 2001 NET REVENUES OF EQUIPMENT 2001 NET REVENUES BY BUSINESS (IN US $ MILLIONS) (IN US $ MILLIONS) North America 4,197 Agricultural Equipment 6,100 Western Europe 587 Construction Equipment 2,900 Latin America 3,168 Financial Services 700 Rest of the World 1,078 CONSOLIDATED FINANCIAL HIGHLIGHTS ACTUAL 2001 ACTUAL 2000 PROFORMA 1999 CNH GLOBAL is the leading manufacturer of agricultural (IN MILLIONS EXCEPT PER SHARE AMOUNTS) tractors and combines in the world, a major manufacturer of construction equipment, and has one of the industry’s largest Consolidated Revenues $ 9,715 $ 10,041 $ 10,673 equipment financing operations. Operating Earnings* $ 245 $ 159 $ 189 CNH was formed in November 1999 through the merger of EBITDA* $ 467 $ 338 $ 569 Case Corporation and New Holland N.V. Our worldwide agricultural and construction equipment businesses are organized regionally Basic Earnings (Loss) per share $ (1.20) $ (1.79) $ (1.26) with separate, brand-driven commercial organizations and Basic Weighted average distribution networks. The company employs 28,127 worldwide in shares outstanding 277 213 149 more than 160 countries and has 11,700 dealers around the globe. * NOTES: Operating Earnings and EBITDA on an Equipment Operations Basis CNH GLOBAL REPRESENTS A FAMILY OF COMPLEMENTARY BRANDS THAT HAVE SHAPED THE HISTORY OF AGRICULTURAL AND CONSTRUCTION EQUIPMENT. WE WILL CONTINUE TO DRIVE SUCCESS FOR OUR CUSTOMERS, DEALERS AND BRANDS WORLDWIDE. let’s go – PAOLO MONFERINO President and Chief Executive Officer WE STRENGTHENED OUR BRANDS AND DEMONSTRATED INNOVATION WITH 101 NEW OR ENHANCED PRODUCTS.
    [Show full text]
  • Make Way for the New AL Quattro Applause for the Latest Generation Self-Levelling Combine at the Convention with the Italian and French Sales Networks
    YEAR VII n° 2 DECEMBER 2007 The harvesting specialist’s journal Make way for the new AL Quattro Applause for the latest generation self-levelling combine at the convention with the Italian and French sales networks INDUSTRIAL AGREEMENT SPAIN, LOOKING IMPORTANT MAINTENANCE: IT ALL STARTED WITH AGCO FOR FORWARD TO 2008 ALLIANCE WITH ADVICE FROM THE WITH A DEVELOPMENT AND AT THE DEALERS’ THE SUPPLIER CHAIN EXPERTS CORN HUSKER INNOVATION MEETING page 2 page 8 page 11 page 13 pages. 14-15 Gruppo Industriale ARGO The situation by Mario Scapin The industrial agreement between Mario Scapin Laverda and Agco leads to new growth director general on the market Product development is off to a head start in Breganze: alongside the spanking The harvesting specialist’s AL Quattro, other projects for a brand-new LS and for ground-breaking journal Year VII, N° , December 007 electronic equipment are also under way Quarterly periodical Registered with the Court of Vicenza N° 1017 of 5 March 00 publishing management Mario Scapin I’m addressing our readers with the for Agco. Consequently, the current best possible way. Angelo Benedetti greatest of pleasure as I’m able to con- structures with which we now operate One of Laverda’s other strategic goals for Simonetta Lambrocco firm the important changes that have on the markets will not be changed in the future is to count on an alternative director in charge affected Laverda over the past few any way. product to the straw-walker machines. Claudio Strati months. Since 004, the Breganze plant Although the Italian market is on the We are, however, aware that the con- art work has been supplying Agco with combine upswing, sales will presumably remain ventional machines will also maintain Andrea Rosset harvesters on an OEM basis, i.e.
    [Show full text]