CDSanesthesia 9000 equipment Small Animal Anesthesia Machine

Common features of the small animal anesthesia machine include a pop-off valve designed to interface with an active waste gas evacuation system and maintain a passively full rebreathing bag; a non-rebreathing outlet port; and 200 ml to four liter O2 flowmeter. It has an easy, quick change absorber canister. Unit has flexibility to accommodate changing clinical practices with optional kits to convert from a tabletop unit to a pole mount or wall mount unit.

Specifications Performance Characteristics: Absorber Canister 900 cc

Pop-Off Valve 19 mm, relieves at 2 cm H2O Inhalation/Exhalation Valves Tapered, 22 mm Flowmeter: Single 0.2 to 4 LPM Dual 0-1000 ml, 0.2 to 4 LPM Flush Valve 10-15 LPM

Pressure Manometer 0-60 cm H2O, 0-30 cm H2O vacuum Gas Inlet(s) DISS male for all gases Vaporizer Connection Tapered, 23 mm Environmental: Operating Temperature 60°F to 90°F (15°C to 32°C) Storage Temperature 30°F to 120°F (-1°C to 48°C) Dimensions & Weight: Respiration Pole Mount (H x W x D) 53.25 in x 26 in x 26 in (135.3 cm x 66 cm x 66 cm), 10.4 kg (23 lbs) Tabletop (H x W x D) 14.5 in x 14.25 in x 10.5 in (36.8 cm x 36.2 cm x 26.7 cm), 6.8 kg (15 lbs) Calibration Daily Pressure Test Recommended These Anesthesia Machine are supplied complete with the following: F-circuit with two liter bag Modified Jackson Rees with 1/2 liter bag anesthesia equipment

® Sodasorb CO2 Absorbent refill bag (2.2 lbs) s Universal anodized aluminum block with built in Pop-Off Occlusion Valve inhalation/exhalation valves Operation Manual s Powder coated for quick and easy cleaning s Pop-off valve maintains a passive breath in the Order # Product rebreathing bag for ease of use PY2 72-7992 CDS 9000 Pole Mount Anesthesia Machine with Single s Fresh gas port Flowmeter 0.2 to 4 LPM s 200 ml to 4 liter O2 flowmeter PY2 72-7993 CDS 9000 Pole Mount Anesthesia Machine with Dual Flowmeter 0-1000 ml, 0.2 to 4 LPM s Easy, quick change absorber canister PY2 72-7994 CDS 9000 Pole Mount Anesthesia Machine with N2O/O2 s Two built-in handles for ease of mobility Flowmeter 0.2 to 4 LPM s Adaptable to all styles of vaporizers PY2 72-6081 CDS 9000 Tabletop Anesthesia Machine with Single s Optional monitor bracket Flowmeter 0.2 to 4 LPM Unit allows for flexibility to accommodate the PY2 72-6082 CDS 9000 Tabletop Anesthesia Machine with Dual s Flowmeter 0-1000 ml, 0.2 to 4 LPM changing research practices with optional kits to convert from a tabletop unit to a pole mount or to PY2 72-6083 CDS 9000 Tabletop Anesthesia Machine with N2O/O2 Flowmeter 0.2 to 4 LPM a wall mount unit Optional Conversion Kits & Brackets s Great performance PY2 72-6073 Tabletop Kit s Easy to service and maintain PY2 72-6074 Wall Mount Kit s PY2 72-6075 Pole Mount Kit PY2 72-6076 Monitor Bracket

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F31 Vaporstickanesthesia Anesthesia & Basic equipment Table Top Machines

Vaporizer Vaporstick PY2 72-3011 not included Anesthesia Machine Basic Table Top Anesthesia s Economical anesthesia Machine delivery system s Dedicated unit for non-rebreathing circuits s Available with optional universal vaporizer mounting bracket s Can be upgraded to a rebreathing system with addition of free standing CO2 absorber system

The Vaporstick is a utility unit designed to supply oxygen to non- rebreathing systems, intensive care (Vaporizer not included) units and nebulizers. The flowmeter, Respiration adjusts from 0.2 to 4 LPM for accurate Basic Table Top Anesthesia Machine patient settings. A flush valve is included for fast immediate oxygen. s Economical benchtop anesthesia system The unit is mounted on a stable spider base (5 legs) and a post assembly. s Dedicated system for non-rebreathing circuits An owner’s manual and modified Jackson Rees non-rebreathing circuit with nshsaequipment anesthesia s Accepts Series 100 vaporizers 1/2 liter bag, PY2 72-3073, see page F41, are included with the anesthesia s Can be upgraded to a rebreathing system with the machine. By adding your choice of options, you can customize the addition of a freestanding CO absorber system Vaporstick to suit your research anesthesia requirements. Z-bracket and 2 endcaps are included. Vaporizer must be ordered separately. s Now includes Rodent Circuit Set!

Order # Product The Basic Table Top Anesthesia Machine is a table top non-rebreathing system similar to the Vaporstick, see left. The Basic Table Top Anesthesia Machine PY2 72-3007 Vaporstick Anesthesia Machine is an extremely compact anesthesia machine, 8 inx8inx13in(LxWxH), PY2 72-3009 Vaporstick with O and N O Flowmeters and Failsafe 2 2 making it ideal for locations where space is limited. Four models are available Optional Accessories which differ only by the type of flowmeter supplied. PY2 72-3010 Freestanding CO2 Absorber System An owners manual, Rodent Circuit Set and Modified Jackson Rees non- PY2 72-3018 Single O2 E-cylinder Regulator and Double Tank Holder, rebreathing circuit with 1/2 liter bag, PY2 72-3073, page F41, and endcaps see page F37 PY2 72-3043 and PY2 72-3044 are included with the anesthesia machine. PY2 72-3020 Dual E-Cylinder O2 Tank Yokes Holder and Regulator The optional freestanding CO2 Absorber System, PY2 72-3010, features the PY2 72-3017 Add-on Mayo Tray same board block rebreathing circuit design as the CDS 9000 Table Top unit. PY2 72-3049 Z-Bracket Universal Vaporizer Mounting Bracket Vaporizer must be ordered separately. Order # Product

PY2 72-3011 Table Top Research with 0.2 to 4 LPM O2 Flowmeter PY2 72-3012 Table Top Research with 0 to 1000 cc Flowmeter

PY2 72-3013 Table Top Research with Dual O2 Flow Meters 0.2-4 LPM and 0-1000 cc

PY2 72-3014 Table Top Research with N2O and O2 Flowmeter and Failsafe

PY2 72-3010 Freestanding CO2 Absorber System

F32 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Anesthesiaanesthesia and Evacuation Systems equipment

PY2 72-3025 Multi-Station diaphragm, it receives the delivered gas/anesthetic agent mixture. Three Research Anesthesia different size diaphragms are available. The waste gas exhaled from the animal and any unused gas delivered by the anesthesia machine, is pulled System around the inner cone through the outside hose of the Rodent Circuit. This s Anesthesia delivery waste gas can be removed from the breathing circuit using either in-house system designed vacuum or the Lab Animal Evacuation system, PY2 72-3066. The unit is a specifically for research simple to use, safe and effective anesthetic delivery and evacuation system s Multiple, individually designed specifically for laboratory research use. controlled stations in The Multi-station Research Anesthesia system is available with two (2), four a single unit (4), or six (6) stations. It is supplied with an operational manual, station hoses, s Unique rodent circuit, rodent circuits which include, a mask, hose and a medium diaphragm and mask and diaphragm endcaps. A vaporizer, see page F36, and evacuation system must be system for safe, purchased separately. effective anesthetic An alternative to the Lab Animal Evacuation system is to connect each rodent (Vaporizer agent delivery circuit exhaust/exhalation line to it’s own F-Air Filter canister, see page F34. not included) s Use with lab animal evacuation system Order # Product The Multi-Station Research Anesthesia System is the latest technology for PY2 72-3023 Lab Animal 2 Station Multi-Station Research System, rodent and small animal anesthesia. The multi-station unit offers a base unit 2 animal with multiple stations each individually controlled. The master flowmeter and PY2 72-3024 Lab Animal 4 Station Multi-Station Research System, auxiliary flowmeters all receive the same gas supply. The master flowmeter 4 animal combined with an anesthetic vaporizer, Series T3, see page F36, are used to PY2 72-3025 Lab Animal 6 Station Multi-Station Research System, 6 animal

set the maximum percentage of anesthetic agent delivered to each station. Respiration Using the auxiliary flowmeters, the percentage of anesthetic agent can be PY2 72-3026 Circuit Set, Rodent, see page F41 diluted using the fresh gas supply from the auxiliary flowmeter. Using an PY2 72-3027 Mask, Rodent (no diaphragm) easy-to-follow flow chart, each individual station can deliver a different PY2 72-3028 Rodent Mask Diaphragm Small (7/16 in Diameter) percentage of anesthetic agent as needed, without effecting any other station. PY2 72-3029 Rodent Mask Diaphragm Medium (9/16 in Diameter) The unique rodent circuit, PY2 72-3026 features a coaxial tube used in PY2 72-3030 Rodent Mask Diaphragm Large (3/4 in Diameter) conjunction with a mask. By placing the animal’s nose into the mask anesthesia equipment Lab Animal Evacuation System PY2 72-3066 Lab Animal Evacuation System The Multi-Station Evacuation System was designed for those facilities that do not have a built-in evacuation system or a fume hood is not available. The waste gas from the system may be vented to a 2 inch outside line or pulled through activated charcoal so that the air can be recirculated in to the room. When using the filtration system, the activated charcoal must be changed on a regular basis, to maintain it’s effectiveness. Typically, 8 to 10 hours of anesthesia delivery can be performed for each new supply of charcoal. The lab evacuation system, will accommodate waste gas supply from 1 to 6 stations.

Order # Product PY2 72-3066 Lab Animal Evacuation System, 110 VAC, 60 Hz PY2 72-3046 Lab Animal Evacuation System, 220 VAC, 50 Hz PY2 72-3067 Charcoal Refill NOTE: When using in-house suction, a scavenger interface valve must be used when operating more than one station, to reduce the pull of air. PY2 72-3026 Rodent Circuit Set

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F33 AESanesthesia and F/Air Filter equipment

AES Active Gas Anesthesia Evacuation Active Gas Evacuation Evacuation System (AES) s Powered unit for safe and effective removal of anesthetic waste gas s Can be mounted to anesthesia machine pole or used as a free standing unit s Two inlet ports allow connection to an induction chamber and an anesthesia machine simultaneously

The Anesthetic Evacuation System (AES) will safely and actively remove waste gas associated with everyday inhalation anesthesia. It can be mounted on the Setup Showing AES Mounted to Pole of Anesthesia Machine pole of the CDS 9000 or Vaporstick, see pages F31 to F32. It can also be used as a freestanding unit and simply placed on the benchtop. Two standard 19 mm (0.75 inch) inlets and one exhaust port allows easy hook-up to existing equipment. A 12 foot grounded electrical cord and lightweight tubing, allows for machine maneuverability. PVC The waste gas from the pop-off valve on most rebreathing anesthesia machines

Valve Coupler is collected by passive flow to the AES. This allows for safe operation of the

Respiration anesthesia machine with little or no vacuum exposure. Using a push blower, 19 Tubing the AES actively removes the waste gas from the unit. The blower has the A Evac. System capacity of moving 12 cubic feet/minute through up to 150 feet of tubing to an outside vent or fume hood. The on/off switch illuminates a green light when the unit is activated. The ‘on’ light assures the operator that the unit is functioning. The Anesthetic Evacuation System includes a 3 inch and a 10 foot length of nshsaequipment anesthesia 19 mm ID hose and a 12.5 mm (0.5 inch) PVC Adapter. Additional lengths of tubing may be required and are available as an option along with an adapter Setup Showing AES Mounted to Wall to interconnect the 19 mm outlet tubing. An optional outlet line ceiling plate is available when connection to an outside wall is not convenient. Unit is 14 in. tall, 5 in. in diameter and weighs 5 lbs.

PVC Order # Product PY2 72-3064 AES Active Gas Evacuation, 110 VAC 60 Hz Valve Tubing PY2 72-3065 AES Active Gas Evacuation, 220 VAC 50 Hz Accessories PY2 72-3093 Tubing 19 mm (0.75 in) ID , 3 m (10 ft) length Evac. System PY2 72-3085 Male Adapters 19 x 19 mm PY2 72-3070 Ceiling Plate Cover PY2 72-6001 19-22 mm Adapters

F/AIR Filter Canister hood. Simply pre-weigh canister noting the starting weight on the side of the canister. Monitor weight throughout the procedure and discard once canister has s The easy and economical gained 50 grams. Once used, the canister is then simply disposed of in regular way to scavenge trash. A connector for tubing is sold separately, see below. The canister is anesthetic gases 15.2 cm (6 in) high with a diameter of 8.3 cm (3-1/4 in). Weight of active component is 200 grams. This filter canister is the sensible answer for the removal of excess Order # Product halogenated gases from the operating PY2 60-0979 F/AIR Filter Canister, pkg. of 1 room environment. It can remove PY2 72-1294 Case of 8 F/AIR Filter Canisters 50 grams of pure halogenated anesthetic gases. It is convenient to PY2 60-5251 Connector for Tubing for F/AIR Filter Canister use and does not require a venting

F34 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Pure-Guard™anesthesia System equipment

Pure-Guard™ System

™ s Takes the guesswork out of knowing when to The Pure-Guard System protects lab personnel from dangerous waste Respiration change your charcoal canister. Remember, agent gases anywhere you use it. Easy-to-use and safer than any other charcoal concentration, flow rates and humidity can canister systems on the market, Pure-Guard™ combines the patented all affect the life of a charcoal canister. The Enviro-Pure™ canister with a special monitor and alarm to offer you pure Pure-Guard™ System alerts you when to change protection. Pure-Guard™ takes the guesswork out of when to change your your canister and keeps you safe. canister by alerting you when the canister is full. As a result, you get s Patented system effectively removes halogenated excellent protection from waste anesthetic gases anywhere in the facility. agents from isoflurane and sevoflurane Order # Product

s Unique alarm system protects you and your staff anesthesia equipment by alerting you to waste anesthetic gas (WAG) PY2 72-8119 Pure-Guard™ System (includes 1 monitor and 6 pack of ™ breakthrough. Enviro-Pure canisters)* PY2 72-8120 Pure-Guard™ Monitor Larger Enviro-Pure™ canister contains 1/3 more s ™ charcoal than conventional canisters. So it lasts PY2 72-8121 Enviro-Pure Canister, pkg. of 6 longer! PY2 72-8122 Pure-Guard™ 1 inch Pole Mount Bracket PY2 72-8123 Pure-Guard™ 2 inch Pole Mount Bracket s Inaccurate and unreliable recording of time is no longer necessary. PY2 72-8124 Pure-Guard™ Wall Mount Bracket *Note: Not for use with halothane s Provides a 20-minute window after the monitor alarm sounds before room air concentration exceeds NIOSH permissible exposure level of 2 ppm (10 x 10 x 8 room with no air exchange). s CE approved

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F35 Vaporizersanesthesia equipment Classic T3 Anesthetic Vaporizers

Anti-Spill Device

Key-Fill Adapter

Vaporizer Endcaps Vaporizer Manifolds Respiration nshsaequipment anesthesia s Specifications s Vaporizers available for Isoflurane and Sevoflurane* Inlet Flow 50 mls to 10 liters/min with minimal change Compensation in output concentration s Annual service and vaporizer conversion available Temperature Range 15ºCto35ºC (59ºFto95ºF) upon request Compensation Calibration 21ºC (69.8ºF) Harvard Apparatus offers new anesthetic vaporizers. These vaporizers from Accuracy ±15% (within above flow and temperature range) the two most popular manufacturers of vaporizers in the world, Cyprane Duration of Use approximately 1.0 ml of liquid anesthetic is required and Ohmeda (formerly Ohio Medical) come with a full warranty and with to provide 200 ml of vapor annual maintenance will offer a lifetime of service. Isoflurane and Sevoflurane Liquid Capacity 125 ml liquid capacity, with 35 mls absorbed by wick specific vaporizers are available. The vaporizer manifold is included with the Dimensions (H x W x D) & Weight: vaporizer. Funnel Fill 18.4 cm x 12.7 cm x 14 cm (7.25 inx5inx5.5in) All vaporizers are designed to be unaffected by pressure, temperature and 7.27 kg (16 lbs) flow rate to give you accurate levels of agent concentrations. The vaporizer Key Fill 18.4 cm x 12.7 cm x 15.2 cm (7.25 inx5inx6in) provides accurate delivery of anesthetic agent in the following ranges: 7.25 inx5inx6in16lbs from 0.25% - 5% in 1/4 increments up to 3% then 1/2 increments up to 5%. Simply choose the anesthetic agent desired. Order # Product PY2 72-8132 T3 Isoflurane Funnel-Fill Vaporizer* PY2 72-7995 T3 Sevoflurane Funnel-Fill Vaporizer* PY2 72-7997 T3 Isoflurane Key-Fill Vaporizer* PY2 72-7996 T3 Sevoflurane Key-Fill Vaporizer* Vaporizer Accessories PY2 72-3051 Filler Adapter for Key-Fill Vaporizer - Isoflurane PY2 72-3053 Filler Adapter for Key-Fill Vaporizer - Sevoflurane PY2 72-3054 Anti-Spill Device - Isoflurane PY2 72-3056 Anti-Spill Device - Sevoflurane PY2 72-3043 Male Endcap - Outlet PY2 72-3044 Female Endcap - Inlet *Note: Vaporizer Endcaps are not included with the Vaporizer. If you are only purchasing a Vaporizer, you must also purchase the Endcaps.

F36 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Anesthesiaanesthesia Machine Accessories equipment

PY2 60-5244 Manifold Manifold with 8 Ports These Manifolds permit the flow of gas to multiple anesthetic devices from only one vaporizer. One side of the Manifold directs the delivery of fresh gas while the other side directs the waste gas collection. Stopcocks, available separately, may be added to the circuit for increased control over the gas flow. Two stopcocks are required for each set of ports. These manifolds can also be used with the rodent circuit and induction chamber to initially anesthetize and maintain without disconnecting the circuit. Requires tubing with ID of 8 mm (0.25 in). *Not suggested for multiple animals, see lab animal multi-station on page F33.

Order # Product PY2 60-5242 Manifold with 4 Ports for 2 Anesthetic Devices s Economical - permits more than one breathing device to be used with one vaporizer PY2 60-5243 Manifold with 6 Ports for 3 Anesthetic Devices PY2 60-5244 Manifold with 8 Ports for 4 Anesthetic Devices s Available with 4, 6, or 8 ports providing 2, 3, or 4 anesthetic channels PY2 60-5245 Stopcock for use with Manifolds, pkg. of 2

PY2 72-3104 O2 and N2O PY2 72-3020 O2 and N2O O2 Regulator with E-Cylinder See description H-Cylinder 0-15 L/M Flowmeter Regulator below Regulator Respiration

Order # Product

PY2 72-3099 O2 Regulator for E-Cylinder (Includes O2 Hose)

PY2 72-3100 O2 Regulator for H-Cylinder (O2 Hose ordered separately)

PY2 72-3103 O2 Regulator for E-Cylinder with 0 to 15 LPM Flowmeter anesthesia equipment (Includes O2 Hose) 0-3 Liters/Minute Manifolds, Regulators, PY2 72-3104 O Regulator for H-Cylinder with 0 to 15 LPM Flowmeter O2 Flow-meter Flowmeters and 2 PY2 72-3102 N O Regulator for H-Cylinder Hoses 2 PY2 72-3018 Single O2 E-Cylinder Regulator & Double Tank Holder

Many accessories to connect a gas PY2 72-3020 Dual E-Cylinder O2 Tank Yokes Holder and Regulator

2 source (O2 or N2O ) to an anesthesia PY2 72-3112 0to3LPMO2 Flowmeter machine are available. Regulators PY2 72-7458 O2 Regulator for H-Cylinder with 0 to 3 LPM Flowmeter

are specific for type of gas and tank 2 PY2 72-3113 0to5LPMO2 Flowmeter size (small, E-cylinder or large, PY2 72-3114 0to15LPMO Flowmeter2 H-cylinder) used. All regulators 2 3 terminate in a gas specific male PY2 72-3115 O2 Hose, 10 ft 3 DISS fitting. E-cylinder regulators PY2 72-3116 O2 Hose, 15 ft 3 attach to tank using a yoke and can PY2 72-3117 O2 Hose, 20 ft 3 only be used with E-size tanks with PY2 72-3118 N2O Hose, 10 ft

3 a post block. Other fittings and PY2 72-3119 N2O Hose, 15 ft connectors available, call Harvard 3 PY2 72-3120 N2O Hose, 20 ft Apparatus Tech Support for more info. PY2 72-5810 DISS Female Hose Barb - O2

PY2 72-5811 DISS Female Hose Barb - N2O 1. Replacement flowmeters for anesthesia machines are available, call for details 2. Flowmeter with Female DISS inlet and Male DISS outlet 3. Connectors on both ends are Female DISS

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F37 COAXanesthesia Breathing Device and Respiratory equipment Adapters

Respiratory Adapters PY2 72-7109 These polypropylene adapters are used to connect different tubing sizes together in respiratory circuits.

Order # Product PY2 72-2889 Respiratory Adapter, 6 to 22 mm (0.24 to 0.87 in), pkg. of 10 PY2 72-2890 Respiratory Adapter, 8 to 22 mm (0.31 to 0.87 in), pkg. of 10 PY2 72-7108 PY2 72-2891 Respiratory Adapter, 10 to 22 mm (0.39 to 0.87 in), pkg. of 10 PY2 72-2892 Respiratory Adapter, 12 to 22 mm (0.47 to 0.87 in), pkg. of 10 PY2 72-2893 Respiratory Adapter, 15 to 22 mm (0.59 to 0.87 in), pkg. of 10 Respiration PY2 72-2894 Respiratory Adapter, 18 to 22 mm (0.71 to 0.87 in), pkg. of 10

nshsaequipment anesthesia Anesthetizing Box s For anesthesia induction COAX Breathing Device s Transparent walls s For rodents, guinea pigs, and birds s All joints are carefully s Durable – constructed of Delrin cemented s Nylon inlet and outlet This COAX breathing device is a precisely machined apparatus which maintains on the opposite walls the surgical plane. The fresh anesthetic gas enters the side port and then s Magnetic rubber for passes to the nose cone. At this point the anesthetic gas is mixed with the sealing and closing cover patient’s respiration and then passes out through a ball check valve to the The Panlab thick transparent Perspex Anesthetizing Box allows for constant gas outlet for scavenging. The positive pressure from the oxygen source and observation of the animal while anesthetizing, which helps protect against the patient’s respiration lifts the precision ball valve for scavenging. A #10 accidental overdosing. balloon acts as a diaphragm or breathing bag. Two models are available: one for small rodents, another for medium The COAX is available as a free standing unit or mounted to a durable HDPE animals (rabbit, cats). procedure table. This table includes metal strips to hold heating pads in place and points for tie downs. This unit is supplied with face masks (2 rat and Specifications 2 mouse), height adjustment collars and 10 ft. of 0.25 in ID tubing. The unit Material Composition Perspex measuresHxWxL,2x40.6 x 31.8 cm (4 x 16 x 12-1/2 in). Dimensions: Order # Product for Rats 24 x 15 x 15 cm (9.5 x 5.9 x 5.9 in) for Rabbits 40 x 29 x 29 cm (15.7 x 11.4 x 11.4 in) PY2 72-7108 Height Adjustable Delrin COAX Inlet/Outlet External Diameter 8 mm (0.3 in) PY2 72-7109 Height Adjustable Delrin COAX with Table

Order # Product PY2 76-0004 Air Tight Anesthetizing Box for Rats PY2 76-0005 Air Tight Anesthetizing Box for Rabbits

F38 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Inductioninduction Chamber, Anesthetizing chambers Boxes and Backdraft Anesthesia Table

PY2 60-5246 Induction Chamber Induction Chamber Dimensions s Clear acrylic for easy Inner, H x Dia 20.3 x 20.3 cm (8x8in) animal observation Small 8.89 x 13.3 cm (3.5 x 5.25 in) Large 20.3 x 20.3 cm (8x8in) s Two sizes Overall, H x Dia 30.5 x 27.9 cm (12 x 11 in) s Ideal for small animals Small 17.8 x 17.8 cm (7x7in) s Stainless steel false Large 30.5 x 27.9 cm (12 x 11 in) bottom for easy Barbs Accepts, ID x OD,6x8mm cleaning (1/8 x 1/4 in) tubing This cylindrical acrylate chamber is ideal for anesthetizing small animals Order # Product such as rodents, guinea pigs, and PY2 72-7110 Induction Chamber, Small birds. It has two, 1/4 inch barbed hose PY2 60-5246 Induction Chamber, Large fittings, one for gas delivery and one for gas scavenging. The gas delivery barb directs the flow of anesthetic gas towards the bottom of the chamber. The chamber has a routed top that ensures a perfect fit. There are no corners so cleaning is easy. Includes 10 ft of 0.25 in ID tubing.

Anesthetizing Boxes These boxes are available in two sizes: small and large. The small box is for rodents. The top slides open lengthwise on machined grooves. The These anesthetizing boxes are PY2 50-0116 large box is for larger animals such as rabbits and cats. Its top has three constructed of 6 mm (1/4 in) thick,

hinges for easy opening. Two fasteners squeeze the top down against a Respiration transparent plastic, with all joints rubber gasket to seal the joints. PY2 50-0108 securely cemented. The transparent The small box measures, HxWxD,10.7 x 25.7 x 11 cm (4 x 10 x 4.5 in). plastic allows the animal to be under The large box measures,HxWxD,29x44x29cm(11.5 x 19.5 x 11.5 in). constant observation. Two 4.8 mm (3/16 in) nylon tubing connectors are *Note: Boxes must be cleaned with an acrylic approved cleaner - not alcohol. cemented on opposite ends of the box, one at the top and the other at Order # Product the bottom, for introducing and PY2 50-0108 Anesthetizing Box, Small induction chambers removing the gas. PY2 50-0116 Anesthetizing Box, Large

Portable Down Specifications Draft Table Total Dimensions: 64.8 x 76.2 cm (25.5 x 30 in) Tabletop 61 x 76.2 cm (24 x 30 in) s Pulls anesthetic gases down and away from Work area 43.2 x 61 cm (17 x 24 in) the researchers Sidewalls 7.6 cm (3 in) out from perforated tabletop Weight 20.4 kg (45 lbs) for tabletop s Better access to animals 10.4 kg (23 lbs) for blower (without filter) than conventional Material Stainless Steel fume hoods Airflow 90 ft/min average velocity at surface; s Superior design and 50 ft/min average velocity 3” above tabletop surface construction prevent Voltage 110 VAC only debris accumulation Autoclavable Yes

Our downdraft table provides an effective way to protect workers from Order # Product exposure to anesthetics, chemicals, and debris particles. Various filters are available to provide the safest surgical environment possible. PY2 72-6201 Portable Down Draft Table with Blower Portable Down Draft Table with Vent Tables are available with a single speed blower unit or with accessories to PY2 72-6202 vent the system outdoors. PY2 72-6205 Aluminum Cart PY2 72-6206 Potassium Permanganate filters, pkg. of 2 Optional accessories include shelving and an anodized aluminum cart. PY2 72-6207 Carbon Filters, pkg. of 2

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F39 anesthesiaAnesthesia Masks and Inhalation accessories Narcosis Chamber

PY2 59-7977 PY2 59-8202 Large Canine Ventilation Mask

PY2 59-8201

PY2 59-8203

Cat Ventilation/Anesthesia Masks Canine Ventilation/Anesthesia Masks These soft pliable vinyl plastic masks conform to the facial contours of a cat. These masks provide a convenient way of providing artificial ventilation or They are fitted with a standard 15 mm (3/5 in) taper for connection to administration of anesthetic gases to dogs. They are constructed of rugged anesthesia machines, see pages F31 to F33. They are available in three sizes transparent polycarbonate. One end has a standard 15 mm (3/5 in) taper for and are supplied individually or as a convenient set containing one mask of connection to anesthesia tubing, while the other end has a soft flexible each size. rubber diaphragm that molds itself to the contours of a dog’s snout. Respiration The mask diameters are 25 mm (1 in), 38 mm (1-1/2 in), and 50 mm (2 in) for Two sizes are available. The small mask has an unstretched diaphragm the small, medium and large size masks respectively. opening of 2.5 cm (1 in), while the large mask has an unstretched opening of 4.4 cm (1-3/4 in). Order # Product PY2 59-8201 Cat Ventilation/Anesthesia Mask, Small Order # Product nshsaaccessories anesthesia PY2 59-8202 Cat Ventilation/Anesthesia Mask, Medium PY2 72-8206 Canine Ventilation/Anesthesia Mask, Small PY2 59-8203 Cat Ventilation/Anesthesia Mask, Large PY2 72-8203 Canine Ventilation/Anesthesia Mask, Large PY2 59-8204 Set of 3 Masks, one of each size PY2 72-8207 Replacement Diaphragm for Small Mask

PY2 59-6717 Inhalation Narcosis Inhalation Narcosis Small Animal Chamber Chamber Anesthesia Masks s Convenient for s For rats, guinea pigs, anesthetizing small birds, and mice animals, such as mice, s Simple, yet effective hamsters, rats, or design guinea pigs PY2 59-8255 These Anesthesia Masks were designed with smaller animals in A clear acrylic hinged cover permits mind. They have a simple cylindrical observation of animals. All other PY2 59-8254 shape with a rubber diaphragm. A components are made of polypropylene and are not affected by anesthetic small slit is cut in the diaphragm to compounds. accommodate the animal’s snout or A folding perforated platform is removed to fill the bottom with cotton and beak. The opposite end tapers down to a standard press fitting port replaced to support the animal. Anesthetic is poured into the small funnel measuring 15.3 mm OD x 11.9 mm ID. These Masks can be used with bain at the side and runs into the bottom of the chamber where it is absorbed circuits, non-rebreathing systems, or ‘Y’ pieces. Includes 1 diaphragm. by cotton. A second stopcock on the other side of the chamber permits the entrance of fresh air during anesthesia to prevent suffocation. Order # Product Maximum ID is 197 mm (7-3/4 in); top ID is 178 mm (7 in); height from PY2 59-8254 Mouse Anesthesia Mask platform to top is 127 mm (5 in); height under platform is 57 mm (2-1/4 in); PY2 59-8255 Rat, Guinea Pig and Bird Anesthesia Mask overall height is 197 mm (7-3/4 in). PY2 72-3923 Replacement Diaphragms, pkg. of 10 Order # Product PY2 59-6717 Inhalation Narcosis Chamber

F40 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Anesthesiaanesthesia Circuits accessories

PY2 72-3026 Rodent PY2 72-3073 Modified Circuit Set Jackson Rees (MJR) Non-rebreathing Anesthesia Circuit

Modified Jackson Rees (MJR) Non-Rebreathing Anesthesia Circuit

Rodent Mask and C-Pram Circuit The Modified Jackson Rees (MJR) is a new design for non-rebreathing. Unlike the old scavenging units, this system incorporates a relief valve on the main unit which allows the use of any size bag. This system will adapt to all anesthesia machines and does not require a Bain Block.

Order # Product PY2 72-3073 Modified Jackson Rees (Non-Rebreather) and Machine End View of Circuit 1/2 Liter Bag PY2 72-3075 Avian/Research MJR and 1/4 Liter Bag

PY2 72-3043 Male Endcap (to connect at outlet end of vaporizer) Respiration PY2 72-3074 Add on Non-Rebreather Adapter

Rodent Circuit Mask s Unique circuit designed specifically for rodent anesthesia s Will work with any non-rebreathing anesthesia machine anesthesia accessories Developed in conjunction with leading research facilities, the Rodent Circuit PY2 72-3071 Universal F-Circuit is the most effective, user-friendly, mask for rodents. Available with 3 different Rebreathing Anesthesia Circuit size diaphragms, the mask easily fits most rodents. With the use of a C-Pram circuit shown above, the mask is designed to deliver and evacuate the gas through one tube. Traditionally, the open mask system has caused problems Universal Rebreathing Anesthesia F-Circuit because of the contamination of waste gas to the staff and the patient The Universal F-circuit is a rebreathing circuit that can be used on small animals rebreathing CO2. These problems are avoided with the Rodent Circuit and mask design. When combined with in-house suction or the Lab Animal Evacuation up to 200 lbs. Rebreathing circuits allow the animal to rebreathe exhaled and System or F/Air canister, see page F34, there is minimal risk of untoward excess vaporized anesthetic agent which have circulated through a CO2 absorber anesthetic agent exposure for the researcher. Inlet tubing: 6.25 mm (0.25 in) system thus reducing the amount of anesthetic agent used. The unique single ID, silicone tubing. Outlet from rodent circuit is a 22 mm (0.866 in) respiratory limb circuit 1) replaces the need for a traditional adult and pediatric circuit, fitting. Respiratory Adapters are available to connect the rodent circuit outlet 2) reduces the clutter around the animal and 3) takes the weight off the end to tubing of various sizes from 6 to 15 mm ID, see page F38. of the endotracheal tube. The tube within a tube design allows heat and moisture to be retained in the circuit, which helps to maintain body temperature Order # Product and recover the patient more quickly. PY2 72-3026 Circuit Set, Rodent (hose, mask and uncut diaphragm) Order # Product PY2 72-3027 Mask, Rodent (no diaphragm) PY2 72-3071 40 inch F-Circuit (rebreathing) PY2 72-3028 Rodent Mask Diaphragm Small (7/16 in DIA) PY2 72-3072 60 inch F-Circuit (rebreathing) PY2 72-3029 Rodent Mask Diaphragm Medium (9/16 in DIA) PY2 72-3082 F-Circuit Elbow PY2 72-3030 Rodent Mask Diaphragm Large (3/4 in) DIA)

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F41 Anesthetic Workstationims and Systems anesthesia

Complete Anesthetic Systems s Fittings and gauges for 1 x O2 and 1 x N2O size E cylinders

s O2 and N2O tapered veterinary flowmeters

s O2 flush

s Low O2 alarm with N2O safety cut out device s Smooth running anti-static castors s Stainless steel shelving s Stainless steel fittings and tubing Mobile Anesthetic Post As well as the modular systems Complete Anesthetic Systems already offered in this catalog, Respiration International Marketing Supply now NEW Mobile Anesthetic Post System to offers an “off the shelf” complete anesthesia system designed specifically for the research laboratory. Our new mobile anesthetic post system is a stable wheeled base with a sturdy support pole. Already fixed to the post is an attachment to mount Specifications m anesthesia ims your pin index regulator of choice (size E Bottles) Simply select your base unit and select your small anesthesia bracket then your regulator (suitable Dimensions: for E size bottles). The small anesthetic bracket unit is already manufactured Over All, H x W x D 1415 x 480 x 720 mm (55.7 x 18.9 x 28.4 in) with all the necessary ports to simply fit to the top of this pole. This Top Shelf, D x W 480 x 400 mm (18.9 x 15.8 in) enables our bracket systems to be adapted into a wheeled solution for ease of use. Simply design your small bracket unit, include your regulator Order # Product from the selection below and include the regulator to flowmeter high PY2 34-0480 Complete Anesthetic System with Halothane pressure hose set and you have a complete system. Funnel Fill Vaporizer PY2 34-0481 Complete Anesthetic System with Halothane Regulators for Post System: Key Fill Vaporizer Order # Product PY2 34-0482 Complete Anesthetic System with Isoflurane Funnel Fill Vaporizer PY2 34-1060 O Pin index regulator for E size cylinders 2 PY2 34-0483 Complete Anesthetic System with Isoflurane PY2 34-1257 Air Pin Index regulator for E size cylinders Key Fill Vaporizer

High Pressure Tubing Assembly: Order # Product

PY2 34-1385 High Pressure Hose from O2 Regulator to Flowmeter, includes connectors

PY2 34-1386 High Pressure Hose from N2O Regulator to Flowmeter, includes connectors PY2 34-1387 High Pressure Hose from Air Regulator to Flowmeter, includes connectors

F42 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Anesthesia Bracket Unitsims anesthesia

PY2 34-0412 PY2 34-1352

Equipment not included Equipment not included Respiration Order # Product Anesthetic Bracket Units - Create Your Base Unit Options: Large Bracket Own System PY2 34-1405 Large Bracket System 1-2 gas Our anesthetic bracket systems are easy! Select your base unit, flowmeters, PY2 34-1406 Wall mounting System for Large Bracket vaporizer type, and source of gas supply and select the corresponding part PY2 34-0403 Oxygen Flow Meter for Large Bracket ims anesthesia numbers, your bracket will then be completely assembled to your specification PY2 34-0404 N20 Flow Meter for Large Bracket and supplied complete. PY2 34-1126 Air Flow Meter for Large Bracket V PY2 34-1138 Carbon Dioxide Flow Meter for Large Bracket S PY2 34-1067 Outlet Tube Mount 23mm for Vaporizer a PY2 34-1068 Inlet Tube Mount 23mm for Vaporizer c PY2 34-1264 Oxygen Flush System for Rapid Recovery t Base Unit Options: Small Bracket b PY2 34-1352 Small Bracket 1-2 gas PY2 34-1404 Wall Mounting System for Small Bracket PY2 34-1420 Oxygen Flow Meter for Small Bracket 0.2 – 2.0 liter/min PY2 34-1261 Nitrous Flow Meter for Small Bracket 0.2 – 2.0 liter/min PY2 34-0781 Air Flow Meter for Small Bracket 0.2 – 2.0 liter/min PY2 34-1067 Outlet Tube Mount 23mm for Vaporizer PY2 72-3044 Inlet Tube Mount 23mm for Vaporizer

Cage Mount Anesthetic Agent Vaporizer Select Isoflurane Pour Fill PY2 34-1040 PY2 34-1259 + PY2 34-1091 Isoflurane Key Fill PY2 34-1041 PY2 34-1172 + PY2 34-1091 Halothane Pour Fill PY2 34-1101 PY2 34-1260 + PY2 34-1091 Halothane Key Fill PY2 34-1102 PY2 34-1213 + PY2 34-1091 Sevoflurane Pour Fill PY2 34-1269 PY2 34-1271 + PY2 34-1091 Sevoflurane Key Fill PY2 34-1270 PY2 34-1272 + PY2 34-1091

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F43 NEW Trolley Anesthesiaims Systems anesthesia

Harvard Apparatus has developed an extensive range of off the shelf anesthesia trolley systems, suitable for a wide range of applications. These mobile trolley systems have anti-static castors, stainless steel shelving, veterinary flowmeters, pin index regulators (suitable for E-size gas bottles).

Specifications Dimension (H x W x D) 1415 x 480 x 720 mm (55.7 x 18.9 x 28.3 in) Top Shelf (D x W) 480 x 400 mm (18.9 x 15.8 in)

Complete Pre-Configured Systems Please refer to the simple selection table below to select your appropriate trolley system for your requirements. All systems are supplied complete, and include all regulators, flowmeter(s), vaporizer, tube mounts and are supplied fully assembled and tested. Respiration m anesthesia ims

Complete Pre-Configured Systems

Isoflourane Halothane Key Fill Pour Fill Low O2 N2O Order # Oxygen N2O Vaporizer Vaporizer Vaporizer Vaporizer Alarm cut off PY2 34-1048 s – s ––s –– PY2 34-1049 s –– sns–– PY2 34-1050 sss––sss PY2 34-1051 ss– s – sss PY2 34-1117 s – s – s ––– PY2 34-1118 s –– ss––– PY2 34-1119 sss– s – ss PY2 34-1120 ss– ss– ss

s Included with system – not included with system

F44 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Anesthetic Bracket Unit,ims Vaporizers anesthesia and Tube Mounts

PY2 34-0412 PY2 34-0397

Halovet Vaporizer Equipment not included s Graduated in 0.5% divisions s For continuous flow “Out of circuit” use Anesthetic Bracket Unit s Single control, locks in “off” position Respiration An alternative means of mounting the anesthetic components (rather than s Compatible with most types of anesthetic using the Anesthetic Workstation), is the IMS Anesthetic Bracket Unit. The machines and fittings Anesthetic Bracket Unit can either be FREE STANDING on a bench or WALL s Supplied as 8% version MOUNTED, with the fixings supplied. It is drilled ready to accept one flowmeter (single gas unit) or two flowmeters (two gas unit). Flowmeters This unit is a flow and temperature compensated vaporizer. It is supplied must be ordered separately.

complete with mounting block and screws. Servicing is carried out directly ims anesthesia with the manufacturer. Specifications Dimensions, HxWxD 460x450x170mm (18.1 x 17.7 x 6.7 in) Order # Product PY2 34-0397 Halovet Vaporizer, Funnel Fill Order # Product PY2 34-0398 Halovet Vaporizer, Key Fill PY2 34-0411 Anesthetic Bracket for Single Gas PY2 34-0401 Key Fill Adapter PY2 34-0412 Anesthetic Bracket for Two Gases

PY2 34-0399 PY2 34-0400

Anesthetic Key Fill Applicators Halovet Tube Mounts To ensure leak free filling of your anesthetic vaporizer select the applicator suitable for your vaporizer. Order # Product PY2 34-0399 Halovet Inlet Tube Mount for 22mm Vaporizers Order # Product PY2 34-0400 Halovet Outlet Tube Mount for 22mm Vaporizers PY2 34-0401 Isoflurane Anesthetic Key Fill Applicator PY2 34-1067 Endcap for PY2 34-1246 PY2 34-0772 Halothane Anesthetic Key Fill Applicator PY2 34-1068 Outlet Endcap for PY2 34-1246 PY2 34-1391 Sevoflurane Anesthetic Key Fill Applicator

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F45 Fluovac System, IMSims Fluosorber anesthesia and Accessories

Fluovac System PY2 34-0415 IMS Fluosorber The Fluosorber consists of a canister containing activated carbon, which absorbs anesthetic gas extremely efficiently. It is used with the Fluovac to scavenge anesthetic waste from the working environment, and is quickly and simply attached to the Fluovac unit. The Fluosorber’s capacity to scavenge is measured by weight: Simply pre-weigh canister and change once it has increased 200 grams. During manufacturing each Fluosorber is tested to ensure an air flow of 60 liters per minute with a flow resistance not exceeding 2.0 cmH2O. When exhausted, the Fluosorber is sealed in the special bags provided and can then be completely incinerated. Supplied in cases of 6 canisters.

Respiration Fluovac System Specifications Active Canister Weight 1200 g (2.65 lbs) s Absorbs anesthetic vapors from the work area, protecting personnel from exposure Exhausted Weight 1400 g (3.1 lbs) s Allows optimal access to the animal particularly important when carrying out close-up or micro Order # Product m anesthesia ims surgery PY2 34-0415 IMS Fluosorber, 6 canisters s A self-contained, portable unit requiring no extra ducting or ventilation PY2 34-0392 Fluovac Exhaust s Three different size masks available Tube Mount s Incorporates a special double mask which supplies the anesthetic and scavenges excess vapors The gas exhaust duct on the rear of simultaneously the Fluovac unit can be fitted with a tube mount to vent exhaust gases s Requires minimal maintenance such as nitrous oxide (Note: It is not s Easy to use: simply connect to your vaporizer necessary to vent if only anesthetic system and insert a Fluosorber canister agent is used as the Fluovac with the Fluosorber canister, removes anesthetic s Each Fluovac is supplied with a size 1-Double mask gas from the atmosphere most effectively). Suitable tube for venting is the cuffed plastic tubing, see PY2 34-0426 on page F53. The Fluovac Systems combines small animal anesthesia with operator safety. Fluosorber canisters must be ordered separately, see to the right. Order # Product PY2 34-0392 Fluovac Exhaust Tube Mount Specifications Overall Dimensions, 180 x 275 x 300 mm (7.1 x 10.8 x 11.8 in), case only HxWxD Fluovac Mask Weight (inc. Fluosorber) 8 kg (17.6 lbs) Support Weight (exc. Fluosorber) 7 kg (15.4 lbs) Power 240 VAC, 50 Hz; 110 VAC, 60 Hz, 37 Watts Designed to hold a Fluovac mask in position on a flat surface. This support IMPORTANT: The Fluovac must only be used with non-flammable gases Fluovac Mask Support minimizes the risk of movement between the animal and the mask. Order # Product PY2 34-0387 Fluovac, 240 VAC, 50 Hz Order # Product Fluovac, 110 VAC, 60 Hz PY2 34-0388 PY2 34-0394 Fluovac Mask Support for Size 1 Mask PY2 34-0395 Fluovac Mask Support for Size 2 Mask PY2 34-0396 Fluovac Mask Support for Size 3 Mask

F46 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Fluovac System ims anesthesia

PY2 34-0389 PY2 34-0391 PY2 34-0402 Fluovac Isolator Valve A most useful addition to our gas scavenging range, the valve redirects gas from the FLUOVAC mask when out of use for short periods. The advantage is that neither the Vaporizer setting nor the flowmeter PY2 34-1379 Fluovac Masks setting have to be altered when an animal is removed from the mask thus saving time having to reset the previous settings. Harvard Apparatus is pleased to introduce the new Fluovac Mouse Also, if the gas flow has inadvertently been set a little high then it could Mask, a single arm coaxial mask overcome the scavenging action at the mask when an animal is removed - the for the delivery and scavenging of use of the valve prevents contamination of the area by stopping the gas anesthetic gases utilizing the reaching the mask. Fluovac System. The valve is activated by the push/pull control knob to the indicated setting. In use the gas supply and scavenged gas flow through specially machined Order # Product channels in the valve. In the isolation mode the gas flow from the vaporizer is directed into the scavenged gas flow while simultaneously opening a PY2 34-1379 Fluovac Mask Size 0.5 single arm (mice) channel to outside air which is sucked into the mask by the scavenging effect Fluovac Mask Size 1 dual arm (rat) PY2 34-0389 thus also clearing traces of anesthetic gas from the mask. PY2 34-0390 Fluovac Mask Size 2 single arm (G. Pig) The units are easily fitted into existing masks by the user - full instructions PY2 34-0391 Fluovac Mask Size 3 single arm (rabbit) are included. Please state the size of the mask to be modified as Size 1 has Respiration a smaller bore Crystaflex tube than2&3. Gas Flow Directors Order # Product An effective yet simple method of PY2 34-0402 Fluovac Isolator Valve* eliminating the Connector Set *Note: This Valve is a registered design. from the IMS Fluovac system. Directs the flow of gas to either or ims anesthesia both double rodent mask simply Fluovac Tube by turning the knob. Restrainer PY2 34-0393 Used for induction of anesthesia if the patient cannot be held at the Fluovac mask - the Size 1 mask end Order # Product is simply plugged into the end of the PY2 34-0393 Gas Flow Directors unit which is then supplied with PY2 34-0457 anesthetic gas and is also scavenged. The patient is kept up to the front of PY2 34-0459 Directavalves the tube with a holding bar. When the animal is anesthetized it is taken out of the tube, the mask is unplugged and the animal is positioned at the Gas flow can be sent in one of two mask–a very quick and easy procedure. directions by simply turning a small valve on top of the assembly. Specifications Internal Diameter 57 mm (2.24 in) Length Adjustable up to 200 mm (7.87 in)

Order # Product Order # Product PY2 34-0457 Fluovac Tube Restrainer PY2 34-0459 Directavalves

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F47 Anesthetizing Chambersims & Table anesthesia

Fluovac Anesthetizing Chamber With Gas Scavenging System

Fluovac Anesthetizing Chamber with Gas Scavenging System NEW Portable Scavenged Anesthesia Table Further enhance the flexibility of your Fluovac system by the addition of a Harvard Apparatus have developed a simple easy to use portable scavenged special anesthetizing chamber. No modifications to the existing Fluovac anesthetic operating table for mice. Simply connect the anesthetic delivery unit are necessary. tube to your anesthetic supply. Then connect the exhaust mount to your The system provides a safe working environment for staff while minimizing Fluovac scavenging system (22 mm bore scavenge tubing). This will give you Respiration stress to the animal. an inexpensive, portable, down-draft operating table. Tables can also be created for Rats. Please ask for details. The crux of the system is the Directavalve, a valve which can control the flow of gases and vapors in either of two directions. Two Directavalves are used Order # Product in the system. One is placed on the outlet tube mount of the Vaporizer, so that halothane can be directed to either the Fluovac masks or the anesthetizing PY2 34-1411 Scavenged Anesthesia Platform m anesthesia ims chamber. The other is placed on the Fluosorber canister, so that Fluovac PY2 34-0909 22mm Bore Tubing to Connect to Fluovac scavenges from the mask or chamber as required. The clear Perspex chamber has a 6mm inlet tube mount which enters the chamber under a false floor. Scavenging is via a tube mount with specially shaped air bleeds. These create a vortex in the chamber, optimizing the scavenging effect. Removal of the animal will cause some vapor to be released: this can be overcome by placing the chamber in a flow hood. Please note that there are two sizes available, the smaller designed is specifically for a single animals.

Gas Scavenging Kit System Components PY2 34-0460 PY2 34-0462 Order # Product Qty. PY2 34-0399 Inlet Tube Mount 1 Anesthetizing PY2 34-0400 Outlet Tube Mount 1 Chamber PY2 34-0422 6 mm Bore PVC Tubing x 1m Long 1 These anesthetizing chambers are PY2 34-0459 Directa Valves 2 available in two sizes. The smaller PY2 34-0909 22 mm Bore Tubing x 1m Long 1 size was designed specifically for Plus Either use with smaller species. PY2 34-0460 Large Anesthetizing Chamber Only 1 Specifications or Dimensions, H x W x D: PY2 34-0462 Small Anesthetizing Chamber Only 1 Large Unit 200 x 200 x 305 mm (7.9 x 17.9 x 12 in) Small Unit 134 x 128 x 170 mm (5.3x5x6.7in) Order # Product PY2 34-0458 Fluovac Anesthetizing Chamber with Gas Scavenging System, Large Order # Product PY2 34-0461 Fluovac Anesthetizing Chamber with Gas Scavenging PY2 34-0460 Anesthetizing Chamber Large System, Small PY2 34-0462 Anesthetizing Chamber Small

F48 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Anesthetizing Chambersims and Workstations anesthesia

Scavenged Anesthetizing Chamber For use in conjunction with the Fluovac. It is easy to use–simply plug a size one mask into the rear socket, turn on the Fluovac and gas supply. When the animal(s) are anesthetized the inner chamber slides forward allowing the gas supply to be diverted and the chamber scavenged. During this process fresh air is drawn into the inner chamber to help scavenge any residual anesthetic gas. The following sizes are the dimensions of the inner chamber only. Please note that there are two sizes available. The smaller is designed specifically for use with a single animal.

PY2 34-0455 PY2 34-0456 Specifications Dimensions, H x W x D: Large Unit 110 x 160 x 260 mm (4.3 x 6.3 x 10.2 in) Small Unit 98 x 106 x 130 mm (3.9 x 4.2 x 5.1 in) NOTE: This system is used when one chamber is sufficient and use of both Size 1 Masks are ᅗ also required. If two chambers are required to Order # Product give sufficient output and masks are not required PY2 34-0455 Scavenged Anesthetizing Chamber, Large then the use of the following system is suggested. PY2 34-0456 Scavenged Anesthetizing Chamber, Small Respiration

Custom Built Options With expertise in design and engineering, Harvard Apparatus Ltd has manufactured many items to our customer’s specification. Pictured below

is a complete down draft, height adjustable mobile anesthetizing table. It ims anesthesia has built in power supply, gas regulators, flowmeters and isoflourane vaporizer, high intensity cold light source, simple snap fit anesthetic mask connections, surgical tray connections and heated surgical board. This was developed to plug into a customer’s existing scavenging systems. The height adjustment is made with a hand held remote control and has 10 preset heights ensuring perfect operating conditions for each user. If you have a similar requirement please contact us with your requirements.

Order # Product PY2 34-1133 Special Operating Table Plus Anesthesia

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F49 Pneumatic Fittings andims CO2 Chambers anesthesia

CO2 Chambers Specifications with Dump Door Dimensions, H x W x D: Large Chamber 305 x 305 x 455 mm (12 x 12 x 17.9 in) An added option for CO Chambers 2 Medium Chamber 200 x 200 x 200 mm (7.9 x 7.9 x 7.9 in) is to have a dump door fitted. This Small Chamber 150 x 100 x 255 mm (5.9 x 3.9 x 10 in) enables CO2 to be cleared from the chamber without having to tip up the chamber and waiting, therefore Order # Product

saving time and effort. PY2 34-0434 CO2 Chamber with Dump Door, Large

The chamber is easily and quickly opened and closed, and locked in place PY2 34-0435 CO2 Chamber with Dump Door, Medium

by means of a centrally placed knob. The side opening is below the false PY2 34-0436 CO2 Chamber with Dump Door, Small floor. Three chambers sizes are available.

Pneumatic Fittings Spares and/or upgrades can be made to existing anesthetic systems by use of pneumatic quick release fittings. Respiration PY2 34-0451 PY2 34-0452 Order # Product PY2 34-0451 1/4" UNC Thread, Female Quick Release Fitting for Use on Chambers etc. PY2 34-0452 Male Quick Release Fitting with Push in Fitting for m anesthesia ims 6mm OD Pneumatic Tubing PY2 34-0453 Coiled 6mm OD Tubing PY2 34-0454 6mm OD Pneumatic Tubing, Natural Color, sold per meter PY2 34-0454 PY2 34-0453

Specifications Dimensions, H x W x D: Large Chamber 315 x 305 x 455 mm (12.4 x 12 x 17.9 in) Medium Chamber 210 x 200 x 305 mm (8.3 x 7.9 x 12 in) Small Chamber 160 x 100 x 255 mm (6.3 x 3.9 x 10 in)

PY2 34-0429 PY2 34-0430 Order # Product

PY2 34-0429 Anesthetic/CO2 Chamber, Large PY2 34-0430 Anesthetic/CO Chamber, Medium Anesthetic/CO2 2 PY2 34-0431 Anesthetic/CO Chamber, Small Chambers 2 PY2 72-1080 Silicone Tubing 3/16" ID, 1/4" OD, 25 ft These chambers havea6mmwall PY2 72-3043 Male Endcap with Barb for 3/16" to 1/4" ID Tubing thickness and can be ordered in either white or clear Perspex. The lid is 10 mm thick clear Perspex and PY2 34-0431 has a foam sealing strip. NOTE: Product PY2 34-0452 Quick Release Inlet Inside, the chamber has a false perforated aluminum floor resting on nylon (male fitting) is available separately. This fitting supports. Brass straight fittings are supplied as standard. The inlet is below ᅗ is for use with coiled pneumatic fitting systems. the grill floor and outlet at top of opposite end. Three different sized chambers area available. Product PY2 34-0452 Quick Release Inlet (male fitting) is available separately. This fitting is for use with coiled pneumatic fitting systems.

F50 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Flowmeters, Regulatorims Valves and anesthesia Tube Mounts

PY2 34-0404 PY2 34-0407 PY2 34-0437 PY2 34-0447

PY2 34-0438 PY2 34-0439

Veterinary Flowmeters for O2 and N2O These are tapered, variable area flowmeters, for use with both oxygen and nitrous oxide. Flow is controlled by a needle valve operated by a simple control knob mounted on the front of the unit. Calibration of the oxygen flowmeter is 200cc/minute to 15 LPM, and of the nitrous oxide flowmeter 100cc/minute to 12 LPM. Tube mounts are included with each flowmeter. Regulator Valves Low flow rates can be obtained with impressive accuracy. The Flowmeter Bench Stand is suitable for PY2 34-0403, PY2 34-0404, PY2 34-0405 and All include tube mounts, 3/8 inch nut to 1/4 inch stem. PY2 34-0406. Respiration Order # Product Order # Product PY2 34-0438 Oxygen: Bull Nose Fitting, 5/8 inch BSP, 2 Gauge, PY2 34-0403 Oxygen Veterinary Flowmeter Single Stage. To Fit Size F Cylinders PY2 34-0404 Nitrous Oxide Veterinary Flowmeter PY2 34-0441 Oxygen: Side Entry, Pin Index, 2 Gauge, Single Stage. To Fit Size E Cylinders PY2 34-0407 Flowmeter Bench Stand PY2 34-0439 Carbon Dioxide: 2 Gauge, Single Stage. ims anesthesia To Fit Size F Cylinders Oxygen Flowmeter (Linear Scale) PY2 34-0440 Carbon Dioxide: Side Entry, Pin Index. 2 Gauge, Single Stage. To Fit Size E Cylinders Covers range of 0 to 10LPM. It has a stainless steel needle valve with PY2 34-0437 Nitrous Oxide: 11/16 inch, 20 TPI Fitting. 2 Gauge, 150mm tube. Tube mounts are included. Single Stage. To Fit Size F Cylinders PY2 34-0442 Carbon Dioxide: Side Entry, Pin Index. 2 Gauge, Order # Product Single Stage. To Fit Size E Cylinders PY2 34-0405 Oxygen Flowmeter, Linear Scale PY2 34-0447 Replacement Washers for pin index regulators are also PY2 34-0407 Flowmeter Bench Stand available. Metal with a rubber seal

PY2 34-0443 Regulator Tube Mounts Replacements to fit any of the above. 3/8 inch nut to 1/4 inch stem.

PY2 34-0406 Order # Product Carbon Dioxide Flowmeter (Linear Scale) PY2 34-0443 Regulator Tube Mounts Covers range of 0-12 LPM. Stainless steel needle valve with 150 mm tube. Again, tube mounts are included. Order # Product PY2 34-0406 Carbon Dioxide Flowmeter, Linear Scale PY2 34-0407 Flowmeter Bench Stand

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F51 Low Oxygen Warningims Alarm, anesthesia Oxygen Flush Control and Tubing

PY2 34-0423

PY2 34-0425

PY2 34-0421 PY2 34-0426 PY2 34-0425

PY2 34-0424

Low Oxygen Warning Alarm Neoprene Antistatic

Respiration PY2 34-0420 A low warning device ensuring safety and continuity during anesthesia Tubing techniques. Simply connects in series between Regulator and Flowmeter and Black (with yellow line). It measures emits a loud whistle when Oxygen drops to a low level in the Cylinder. 6mm ID x 13mm OD and is supplied This is activated between 2.5 - 2 bar in a decreasing concentration leaving ample in 1 meter length. m anesthesia ims time for the operator to change the cylinder with the minimum disruption in procedure.

Order # Product Order # Product PY2 34-0473 Low Oxygen Warning Alarm PY2 34-0420 Neoprene Antistatic Tubing

Oxygen Flush Control Silicone Tubing Incorporated into a anesthetic unit to supply oxygen directly from source to Used as the inner supply tube the animal, or for emergency use plus an aid to recovery. for Fluovac masks. It measures 6mm ID x 10mm OD and is Order # Product PY2 34-0421 supplied in 1 meter length. PY2 34-0474 Oxygen Flush Control Order # Product High Pressure PY2 34-0421 Silicone Tubing Tubing This High Pressure Tubing is black PY2 34-0422 PVC Tubing PY2 34-0423 and measures 6mm ID x 13mm OD. This tubing is available in 2 sizes It is supplied in 1 meter lengths. For use with CO2 or compressed air. and is supplied in 1 meter lengths.

Order # Product PY2 34-0423 High Pressure Tubing Order # Product PY2 34-0422 PVC Tubing, 6mm ID x 9mm OD PY2 34-0782 PVC Tubing, 8mm ID x 11mm OD

F52 phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] Tubing, Replacementims Tubing, Y anesthesia Pieces and Tube Clamps

Anti-Static High Pressure Tubing Anti-Static High PY2 34-0940 Y Pieces Pressure Tubing These y-connectors are constructed This anti-static tubing measures of white polypropylene and measure 6mmIDx13mmODandis 6.7mmIDx9mmOD.Supplied 10 supplied in 1 meter lengths. It is per package. available in two colors.

Order # Product Order # Product PY2 34-0424 Anti-Static High Pressure Tubing, Oxygen PY2 34-0940 Y Pieces, pkg. of 10 (White in Color) PY2 34-0425 Anti-Static High Pressure Tubing, Nitrous Oxide (Blue in Color)

PY2 34-0426 Corrugated Plastic Tube Clamps Tubing The Tube Clamps have a knurled Corrugated tubing to fit all 22 mm adjuster screw and hinged side tapered male tube mounts (including plate. Supplied 10 per package. Directavlaves, Halovets etc.). Supplied as a continuous 10 meter length, which can be cut into 38 cm sections each end having a 22 mm taper. Respiration

Order # Product Order # Product PY2 34-0426 Plastic Tubing, 22 mm Taper, 10 meters PY2 34-0941 Tube Clamps, pkg. of 10 ims anesthesia

Fluovac Mask Replacement Tubing

Fluovac Mask Replacement Tubing Convert from a Gas Bottle to a Piped Gas Supply Order # Product Harvard Apparatus have developed a simple connector to convert any PY2 34-0427 Fluovac Mask Replacement Tubing, Size 1, anesthetic trolley or bracket system with pin index regulator to be able to 27 mm OD x 1 m long receive gas supply from a wall mounted piped gas supply. Simply connect PY2 34-0428 Fluovac Mask Replacement Tubing, Size 2 & 3, one end to your wall mounted supply and then insert the specially designed 30 mm OD x 1 m long pin index block into the pin index socket on your regulator. The length of high pressure hose supplied is 2 m (other sizes and gasses can be custom made if necessary).

Hose Order # Supplied Product PY2 34-1064 2 m (6.6 ft) Hose to Pin Index for Oxygen PY2 34-1065 2 m (6.6 ft) Hose to Pin Index for Nitrous Oxide

phone. 031-790-4671 fax. 031-790-4672 e-mail. [email protected] F53